From 641912f479962e50b29573a8c0e8c514eb02e9b8 Mon Sep 17 00:00:00 2001 From: Prarit Bhargava Date: Fri, 6 Aug 2010 11:41:24 -0400 Subject: watchdog: iTCO_wdt: Cleanup warning messages The current iTCO_wdt driver warnings are confusing. Currently when the device driver returns an error the console contains: iTCO_vendor_support: vendor-support=0 iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05 iTCO_wdt: failed to reset NO_REBOOT flag, reboot disabled by hardware iTCO_wdt: No card detected After the patch, iTCO_vendor_support: vendor-support=0 iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05 iTCO_wdt: failed to reset NO_REBOOT flag, device disabled by hardware/BIOS Clean this up and use the word "device" to describe the device. Signed-off-by: Prarit Bhargava Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/iTCO_wdt.c | 21 ++++++++++++--------- 1 file changed, 12 insertions(+), 9 deletions(-) (limited to 'drivers/watchdog/iTCO_wdt.c') diff --git a/drivers/watchdog/iTCO_wdt.c b/drivers/watchdog/iTCO_wdt.c index cdc79450538d..bc69731a5e6a 100644 --- a/drivers/watchdog/iTCO_wdt.c +++ b/drivers/watchdog/iTCO_wdt.c @@ -377,7 +377,7 @@ static char expect_release; static struct { /* this is private data for the iTCO_wdt device */ /* TCO version/generation */ unsigned int iTCO_version; - /* The cards ACPIBASE address (TCOBASE = ACPIBASE+0x60) */ + /* The device's ACPIBASE address (TCOBASE = ACPIBASE+0x60) */ unsigned long ACPIBASE; /* NO_REBOOT flag is Memory-Mapped GCS register bit 5 (TCO version 2)*/ unsigned long __iomem *gcs; @@ -470,7 +470,7 @@ static int iTCO_wdt_start(void) if (iTCO_wdt_unset_NO_REBOOT_bit()) { spin_unlock(&iTCO_wdt_private.io_lock); printk(KERN_ERR PFX "failed to reset NO_REBOOT flag, " - "reboot disabled by hardware\n"); + "reboot disabled by hardware/BIOS\n"); return -EIO; } @@ -784,7 +784,8 @@ static int __devinit iTCO_wdt_init(struct pci_dev *pdev, base_address &= 0x0000ff80; if (base_address == 0x00000000) { /* Something's wrong here, ACPIBASE has to be set */ - printk(KERN_ERR PFX "failed to get TCOBASE address\n"); + printk(KERN_ERR PFX "failed to get TCOBASE address, " + "device disabled by hardware/BIOS\n"); pci_dev_put(pdev); return -ENODEV; } @@ -800,7 +801,8 @@ static int __devinit iTCO_wdt_init(struct pci_dev *pdev, if (iTCO_wdt_private.iTCO_version == 2) { pci_read_config_dword(pdev, 0xf0, &base_address); if ((base_address & 1) == 0) { - printk(KERN_ERR PFX "RCBA is disabled by hardware\n"); + printk(KERN_ERR PFX "RCBA is disabled by hardware" + "/BIOS, device disabled\n"); ret = -ENODEV; goto out; } @@ -811,7 +813,7 @@ static int __devinit iTCO_wdt_init(struct pci_dev *pdev, /* Check chipset's NO_REBOOT bit */ if (iTCO_wdt_unset_NO_REBOOT_bit() && iTCO_vendor_check_noreboot_on()) { printk(KERN_INFO PFX "unable to reset NO_REBOOT flag, " - "platform may have disabled it\n"); + "device disabled by hardware/BIOS\n"); ret = -ENODEV; /* Cannot reset NO_REBOOT bit */ goto out_unmap; } @@ -822,7 +824,8 @@ static int __devinit iTCO_wdt_init(struct pci_dev *pdev, /* The TCO logic uses the TCO_EN bit in the SMI_EN register */ if (!request_region(SMI_EN, 4, "iTCO_wdt")) { printk(KERN_ERR PFX - "I/O address 0x%04lx already in use\n", SMI_EN); + "I/O address 0x%04lx already in use, " + "device disabled\n", SMI_EN); ret = -EIO; goto out_unmap; } @@ -834,8 +837,8 @@ static int __devinit iTCO_wdt_init(struct pci_dev *pdev, /* The TCO I/O registers reside in a 32-byte range pointed to by the TCOBASE value */ if (!request_region(TCOBASE, 0x20, "iTCO_wdt")) { - printk(KERN_ERR PFX "I/O address 0x%04lx already in use\n", - TCOBASE); + printk(KERN_ERR PFX "I/O address 0x%04lx already in use " + "device disabled\n", TCOBASE); ret = -EIO; goto unreg_smi_en; } @@ -924,7 +927,7 @@ static int __devinit iTCO_wdt_probe(struct platform_device *dev) } if (!found) - printk(KERN_INFO PFX "No card detected\n"); + printk(KERN_INFO PFX "No device detected.\n"); return ret; } -- cgit v1.2.3