From f9dc024a2da1fe6b0ce180b89fac085e1255a932 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Sat, 13 Sep 2014 12:26:42 +0200 Subject: uas: pre_reset and suspend: Fix a few races The purpose of uas_pre_reset is to: 1) Stop any new commands from being submitted while an externally triggered usb-device-reset is running 2) Wait for any pending commands to finish before allowing the usb-device-reset to continue The purpose of uas_suspend is to: 2) Wait for any pending commands to finish before suspending This commit fixes races in both paths: 1) For 1) we use scsi_block_requests, but the scsi midlayer calls queuecommand without holding any locks, so a queuecommand may already past the midlayer scsi_block_requests checks when we call it, add a check to uas_queuecommand to fix this 2) For 2) we were waiting for all sense-urbs to complete, there are 2 problems with this approach: a) data-urbs may complete after the sense urb, so we need to check for those too b) if a sense-urb completes with a iu id of READ/WRITE_READY a command is not yet done. We submit a new sense-urb immediately in this case, but that submit may fail (in which case it will get retried by uas_do_work), if this happens the sense_urbs anchor may become empty while the cmnd is not yet done Also unblock requests on timeout, to avoid things getting stuck in that case. Signed-off-by: Hans de Goede Signed-off-by: Greg Kroah-Hartman --- drivers/usb/storage/uas.c | 61 ++++++++++++++++++++++++++++++++++++++++++----- 1 file changed, 55 insertions(+), 6 deletions(-) (limited to 'drivers/usb/storage/uas.c') diff --git a/drivers/usb/storage/uas.c b/drivers/usb/storage/uas.c index 10a3dea041ed..8d2e5450de91 100644 --- a/drivers/usb/storage/uas.c +++ b/drivers/usb/storage/uas.c @@ -667,6 +667,10 @@ static int uas_queuecommand_lck(struct scsi_cmnd *cmnd, BUILD_BUG_ON(sizeof(struct uas_cmd_info) > sizeof(struct scsi_pointer)); + /* Re-check scsi_block_requests now that we've the host-lock */ + if (cmnd->device->host->host_self_blocked) + return SCSI_MLQUEUE_DEVICE_BUSY; + if ((devinfo->flags & US_FL_NO_ATA_1X) && (cmnd->cmnd[0] == ATA_12 || cmnd->cmnd[0] == ATA_16)) { memcpy(cmnd->sense_buffer, usb_stor_sense_invalidCDB, @@ -1009,6 +1013,54 @@ set_alt0: return result; } +static int uas_cmnd_list_empty(struct uas_dev_info *devinfo) +{ + unsigned long flags; + int i, r = 1; + + spin_lock_irqsave(&devinfo->lock, flags); + + for (i = 0; i < devinfo->qdepth; i++) { + if (devinfo->cmnd[i]) { + r = 0; /* Not empty */ + break; + } + } + + spin_unlock_irqrestore(&devinfo->lock, flags); + + return r; +} + +/* + * Wait for any pending cmnds to complete, on usb-2 sense_urbs may temporarily + * get empty while there still is more work to do due to sense-urbs completing + * with a READ/WRITE_READY iu code, so keep waiting until the list gets empty. + */ +static int uas_wait_for_pending_cmnds(struct uas_dev_info *devinfo) +{ + unsigned long start_time; + int r; + + start_time = jiffies; + do { + flush_work(&devinfo->work); + + r = usb_wait_anchor_empty_timeout(&devinfo->sense_urbs, 5000); + if (r == 0) + return -ETIME; + + r = usb_wait_anchor_empty_timeout(&devinfo->data_urbs, 500); + if (r == 0) + return -ETIME; + + if (time_after(jiffies, start_time + 5 * HZ)) + return -ETIME; + } while (!uas_cmnd_list_empty(devinfo)); + + return 0; +} + static int uas_pre_reset(struct usb_interface *intf) { struct Scsi_Host *shost = usb_get_intfdata(intf); @@ -1023,10 +1075,9 @@ static int uas_pre_reset(struct usb_interface *intf) scsi_block_requests(shost); spin_unlock_irqrestore(shost->host_lock, flags); - /* Wait for any pending requests to complete */ - flush_work(&devinfo->work); - if (usb_wait_anchor_empty_timeout(&devinfo->sense_urbs, 5000) == 0) { + if (uas_wait_for_pending_cmnds(devinfo) != 0) { shost_printk(KERN_ERR, shost, "%s: timed out\n", __func__); + scsi_unblock_requests(shost); return 1; } @@ -1064,9 +1115,7 @@ static int uas_suspend(struct usb_interface *intf, pm_message_t message) struct Scsi_Host *shost = usb_get_intfdata(intf); struct uas_dev_info *devinfo = (struct uas_dev_info *)shost->hostdata; - /* Wait for any pending requests to complete */ - flush_work(&devinfo->work); - if (usb_wait_anchor_empty_timeout(&devinfo->sense_urbs, 5000) == 0) { + if (uas_wait_for_pending_cmnds(devinfo) != 0) { shost_printk(KERN_ERR, shost, "%s: timed out\n", __func__); return -ETIME; } -- cgit v1.2.3