From 273558b3a0399e368d99da5b3daf1c0e11b93e06 Mon Sep 17 00:00:00 2001 From: "Govindraj.R" Date: Tue, 13 Sep 2011 14:01:01 +0530 Subject: ARM: OMAP2+: UART: Cleanup part of clock gating mechanism for uart Currently we use a shared irq handler to identify uart activity and then trigger a timer. By default the timeout value is zero and can be set or modified from sysfs. If there was no uart activity for the period set through sysfs, the timer will expire and call timer handler this will set a flag can_sleep using which decision to gate uart clocks can be taken. Since the clock gating mechanism is outside the uart driver, we currently use this mechanism. In preparation to runtime implementation for omap-serial driver we can cleanup this mechanism and use runtime API's to gate uart clocks. Removes the following: * timer related info from local uart_state struct * the code used to set timeout value from sysfs. * irqflags used to set shared irq handler. * un-used function omap_uart_check_wakeup. Signed-off-by: Govindraj.R Acked-by: Greg Kroah-Hartman (for drivers/tty changes) Signed-off-by: Kevin Hilman --- drivers/tty/serial/omap-serial.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers/tty') diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c index 5e713d3ef1f4..be368cf70f3c 100644 --- a/drivers/tty/serial/omap-serial.c +++ b/drivers/tty/serial/omap-serial.c @@ -1278,7 +1278,6 @@ static int serial_omap_probe(struct platform_device *pdev) up->port.membase = omap_up_info->membase; up->port.mapbase = omap_up_info->mapbase; up->port.flags = omap_up_info->flags; - up->port.irqflags = omap_up_info->irqflags; up->port.uartclk = omap_up_info->uartclk; up->uart_dma.uart_base = mem->start; -- cgit v1.2.3 From edd70ad757e9b336116433e6e62de79ae1dfef54 Mon Sep 17 00:00:00 2001 From: "Govindraj.R" Date: Tue, 11 Oct 2011 14:55:41 +0530 Subject: ARM: OMAP2+: UART: Remove mapbase/membase fields from pdata. The mapbase (start_address), membase(io_remap cookie) part of pdata struct omap_uart_port_info are removed as this should be derived within driver. Signed-off-by: Govindraj.R Acked-by: Greg Kroah-Hartman (for drivers/tty changes) Signed-off-by: Kevin Hilman --- arch/arm/mach-omap2/serial.c | 2 -- arch/arm/plat-omap/include/plat/omap-serial.h | 2 -- drivers/tty/serial/omap-serial.c | 10 ++++++++-- 3 files changed, 8 insertions(+), 6 deletions(-) (limited to 'drivers/tty') diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c index 77feaab78059..2456cfdad78c 100644 --- a/arch/arm/mach-omap2/serial.c +++ b/arch/arm/mach-omap2/serial.c @@ -605,8 +605,6 @@ void __init omap_serial_init_port(struct omap_board_data *bdata) omap_up.dma_enabled = uart->dma_enabled; omap_up.uartclk = OMAP24XX_BASE_BAUD * 16; - omap_up.mapbase = oh->slaves[0]->addr->pa_start; - omap_up.membase = omap_hwmod_get_mpu_rt_va(oh); omap_up.flags = UPF_BOOT_AUTOCONF; pdata = &omap_up; diff --git a/arch/arm/plat-omap/include/plat/omap-serial.h b/arch/arm/plat-omap/include/plat/omap-serial.h index 307cd6f15822..db9bda978767 100644 --- a/arch/arm/plat-omap/include/plat/omap-serial.h +++ b/arch/arm/plat-omap/include/plat/omap-serial.h @@ -59,8 +59,6 @@ struct omap_uart_port_info { bool dma_enabled; /* To specify DMA Mode */ unsigned int uartclk; /* UART clock rate */ - void __iomem *membase; /* ioremap cookie or NULL */ - resource_size_t mapbase; /* resource base */ upf_t flags; /* UPF_* flags */ }; diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c index be368cf70f3c..31f0cbf73c18 100644 --- a/drivers/tty/serial/omap-serial.c +++ b/drivers/tty/serial/omap-serial.c @@ -1275,8 +1275,14 @@ static int serial_omap_probe(struct platform_device *pdev) up->port.ops = &serial_omap_pops; up->port.line = pdev->id; - up->port.membase = omap_up_info->membase; - up->port.mapbase = omap_up_info->mapbase; + up->port.mapbase = mem->start; + up->port.membase = ioremap(mem->start, resource_size(mem)); + if (!up->port.membase) { + dev_err(&pdev->dev, "can't ioremap UART\n"); + ret = -ENOMEM; + goto err; + } + up->port.flags = omap_up_info->flags; up->port.uartclk = omap_up_info->uartclk; up->uart_dma.uart_base = mem->start; -- cgit v1.2.3 From fcdca75728ac376f3de74376c791e1078ee83820 Mon Sep 17 00:00:00 2001 From: "Govindraj.R" Date: Mon, 28 Feb 2011 18:12:23 +0530 Subject: ARM: OMAP2+: UART: Add runtime pm support for omap-serial driver Adapts omap-serial driver to use pm_runtime API's. Use runtime runtime API's to handle uart clocks and obtain device_usage statics. Set runtime API's usage to irq_safe so that we can use get_sync from irq context. Auto-suspend for port specific activities and put for reg access. Moving suspend/resume hooks to dev_pm_ops structure and bind with config_suspend to avoid any compilation warning if config_suspend is disabled. By default uart autosuspend delay is set to -1 to avoid character loss if uart's are autoidled and woken up on rx pin. After boot up UART's can be autoidled by setting autosuspend delay from sysfs. echo 3000 > /sys/devices/platform/omap/omap_uart.X/power/autosuspend_delay_ms X=0,1,2,3 for UART1/2/3/4. Number of uarts available may vary across omap_soc. Also if uart is not wakeup capable we can prevent runtime autosuspend by forbiding runtime. Signed-off-by: Govindraj.R Acked-by: Alan Cox Acked-by: Greg Kroah-Hartman Signed-off-by: Kevin Hilman --- drivers/tty/serial/omap-serial.c | 122 ++++++++++++++++++++++++++++++++++----- 1 file changed, 109 insertions(+), 13 deletions(-) (limited to 'drivers/tty') diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c index 31f0cbf73c18..f16ef4b9363d 100644 --- a/drivers/tty/serial/omap-serial.c +++ b/drivers/tty/serial/omap-serial.c @@ -37,11 +37,14 @@ #include #include #include +#include #include #include #include +#define OMAP_UART_AUTOSUSPEND_DELAY -1 + static struct uart_omap_port *ui[OMAP_MAX_HSUART_PORTS]; /* Forward declaration of functions */ @@ -102,6 +105,8 @@ static void serial_omap_stop_rxdma(struct uart_omap_port *up) omap_free_dma(up->uart_dma.rx_dma_channel); up->uart_dma.rx_dma_channel = OMAP_UART_DMA_CH_FREE; up->uart_dma.rx_dma_used = false; + pm_runtime_mark_last_busy(&up->pdev->dev); + pm_runtime_put_autosuspend(&up->pdev->dev); } } @@ -110,8 +115,11 @@ static void serial_omap_enable_ms(struct uart_port *port) struct uart_omap_port *up = (struct uart_omap_port *)port; dev_dbg(up->port.dev, "serial_omap_enable_ms+%d\n", up->pdev->id); + + pm_runtime_get_sync(&up->pdev->dev); up->ier |= UART_IER_MSI; serial_out(up, UART_IER, up->ier); + pm_runtime_put(&up->pdev->dev); } static void serial_omap_stop_tx(struct uart_port *port) @@ -129,23 +137,32 @@ static void serial_omap_stop_tx(struct uart_port *port) omap_stop_dma(up->uart_dma.tx_dma_channel); omap_free_dma(up->uart_dma.tx_dma_channel); up->uart_dma.tx_dma_channel = OMAP_UART_DMA_CH_FREE; + pm_runtime_mark_last_busy(&up->pdev->dev); + pm_runtime_put_autosuspend(&up->pdev->dev); } + pm_runtime_get_sync(&up->pdev->dev); if (up->ier & UART_IER_THRI) { up->ier &= ~UART_IER_THRI; serial_out(up, UART_IER, up->ier); } + + pm_runtime_mark_last_busy(&up->pdev->dev); + pm_runtime_put_autosuspend(&up->pdev->dev); } static void serial_omap_stop_rx(struct uart_port *port) { struct uart_omap_port *up = (struct uart_omap_port *)port; + pm_runtime_get_sync(&up->pdev->dev); if (up->use_dma) serial_omap_stop_rxdma(up); up->ier &= ~UART_IER_RLSI; up->port.read_status_mask &= ~UART_LSR_DR; serial_out(up, UART_IER, up->ier); + pm_runtime_mark_last_busy(&up->pdev->dev); + pm_runtime_put_autosuspend(&up->pdev->dev); } static inline void receive_chars(struct uart_omap_port *up, int *status) @@ -262,7 +279,10 @@ static void serial_omap_start_tx(struct uart_port *port) int ret = 0; if (!up->use_dma) { + pm_runtime_get_sync(&up->pdev->dev); serial_omap_enable_ier_thri(up); + pm_runtime_mark_last_busy(&up->pdev->dev); + pm_runtime_put_autosuspend(&up->pdev->dev); return; } @@ -272,6 +292,7 @@ static void serial_omap_start_tx(struct uart_port *port) xmit = &up->port.state->xmit; if (up->uart_dma.tx_dma_channel == OMAP_UART_DMA_CH_FREE) { + pm_runtime_get_sync(&up->pdev->dev); ret = omap_request_dma(up->uart_dma.uart_dma_tx, "UART Tx DMA", (void *)uart_tx_dma_callback, up, @@ -354,9 +375,13 @@ static inline irqreturn_t serial_omap_irq(int irq, void *dev_id) unsigned int iir, lsr; unsigned long flags; + pm_runtime_get_sync(&up->pdev->dev); iir = serial_in(up, UART_IIR); - if (iir & UART_IIR_NO_INT) + if (iir & UART_IIR_NO_INT) { + pm_runtime_mark_last_busy(&up->pdev->dev); + pm_runtime_put_autosuspend(&up->pdev->dev); return IRQ_NONE; + } spin_lock_irqsave(&up->port.lock, flags); lsr = serial_in(up, UART_LSR); @@ -378,6 +403,9 @@ static inline irqreturn_t serial_omap_irq(int irq, void *dev_id) transmit_chars(up); spin_unlock_irqrestore(&up->port.lock, flags); + pm_runtime_mark_last_busy(&up->pdev->dev); + pm_runtime_put_autosuspend(&up->pdev->dev); + up->port_activity = jiffies; return IRQ_HANDLED; } @@ -388,11 +416,12 @@ static unsigned int serial_omap_tx_empty(struct uart_port *port) unsigned long flags = 0; unsigned int ret = 0; + pm_runtime_get_sync(&up->pdev->dev); dev_dbg(up->port.dev, "serial_omap_tx_empty+%d\n", up->pdev->id); spin_lock_irqsave(&up->port.lock, flags); ret = serial_in(up, UART_LSR) & UART_LSR_TEMT ? TIOCSER_TEMT : 0; spin_unlock_irqrestore(&up->port.lock, flags); - + pm_runtime_put(&up->pdev->dev); return ret; } @@ -402,7 +431,10 @@ static unsigned int serial_omap_get_mctrl(struct uart_port *port) unsigned char status; unsigned int ret = 0; + pm_runtime_get_sync(&up->pdev->dev); status = check_modem_status(up); + pm_runtime_put(&up->pdev->dev); + dev_dbg(up->port.dev, "serial_omap_get_mctrl+%d\n", up->pdev->id); if (status & UART_MSR_DCD) @@ -433,8 +465,10 @@ static void serial_omap_set_mctrl(struct uart_port *port, unsigned int mctrl) if (mctrl & TIOCM_LOOP) mcr |= UART_MCR_LOOP; + pm_runtime_get_sync(&up->pdev->dev); mcr |= up->mcr; serial_out(up, UART_MCR, mcr); + pm_runtime_put(&up->pdev->dev); } static void serial_omap_break_ctl(struct uart_port *port, int break_state) @@ -443,6 +477,7 @@ static void serial_omap_break_ctl(struct uart_port *port, int break_state) unsigned long flags = 0; dev_dbg(up->port.dev, "serial_omap_break_ctl+%d\n", up->pdev->id); + pm_runtime_get_sync(&up->pdev->dev); spin_lock_irqsave(&up->port.lock, flags); if (break_state == -1) up->lcr |= UART_LCR_SBC; @@ -450,6 +485,7 @@ static void serial_omap_break_ctl(struct uart_port *port, int break_state) up->lcr &= ~UART_LCR_SBC; serial_out(up, UART_LCR, up->lcr); spin_unlock_irqrestore(&up->port.lock, flags); + pm_runtime_put(&up->pdev->dev); } static int serial_omap_startup(struct uart_port *port) @@ -468,6 +504,7 @@ static int serial_omap_startup(struct uart_port *port) dev_dbg(up->port.dev, "serial_omap_startup+%d\n", up->pdev->id); + pm_runtime_get_sync(&up->pdev->dev); /* * Clear the FIFO buffers and disable them. * (they will be reenabled in set_termios()) @@ -523,6 +560,8 @@ static int serial_omap_startup(struct uart_port *port) /* Enable module level wake up */ serial_out(up, UART_OMAP_WER, OMAP_UART_WER_MOD_WKUP); + pm_runtime_mark_last_busy(&up->pdev->dev); + pm_runtime_put_autosuspend(&up->pdev->dev); up->port_activity = jiffies; return 0; } @@ -533,6 +572,8 @@ static void serial_omap_shutdown(struct uart_port *port) unsigned long flags = 0; dev_dbg(up->port.dev, "serial_omap_shutdown+%d\n", up->pdev->id); + + pm_runtime_get_sync(&up->pdev->dev); /* * Disable interrupts from this port */ @@ -566,6 +607,8 @@ static void serial_omap_shutdown(struct uart_port *port) up->uart_dma.rx_buf_dma_phys); up->uart_dma.rx_buf = NULL; } + + pm_runtime_put(&up->pdev->dev); free_irq(up->port.irq, up); } @@ -680,6 +723,7 @@ serial_omap_set_termios(struct uart_port *port, struct ktermios *termios, * Ok, we're now changing the port state. Do it with * interrupts disabled. */ + pm_runtime_get_sync(&up->pdev->dev); spin_lock_irqsave(&up->port.lock, flags); /* @@ -809,6 +853,7 @@ serial_omap_set_termios(struct uart_port *port, struct ktermios *termios, serial_omap_configure_xonxoff(up, termios); spin_unlock_irqrestore(&up->port.lock, flags); + pm_runtime_put(&up->pdev->dev); dev_dbg(up->port.dev, "serial_omap_set_termios+%d\n", up->pdev->id); } @@ -820,6 +865,8 @@ serial_omap_pm(struct uart_port *port, unsigned int state, unsigned char efr; dev_dbg(up->port.dev, "serial_omap_pm+%d\n", up->pdev->id); + + pm_runtime_get_sync(&up->pdev->dev); serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); efr = serial_in(up, UART_EFR); serial_out(up, UART_EFR, efr | UART_EFR_ECB); @@ -829,6 +876,15 @@ serial_omap_pm(struct uart_port *port, unsigned int state, serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); serial_out(up, UART_EFR, efr); serial_out(up, UART_LCR, 0); + + if (!device_may_wakeup(&up->pdev->dev)) { + if (!state) + pm_runtime_forbid(&up->pdev->dev); + else + pm_runtime_allow(&up->pdev->dev); + } + + pm_runtime_put(&up->pdev->dev); } static void serial_omap_release_port(struct uart_port *port) @@ -906,19 +962,26 @@ static inline void wait_for_xmitr(struct uart_omap_port *up) static void serial_omap_poll_put_char(struct uart_port *port, unsigned char ch) { struct uart_omap_port *up = (struct uart_omap_port *)port; + + pm_runtime_get_sync(&up->pdev->dev); wait_for_xmitr(up); serial_out(up, UART_TX, ch); + pm_runtime_put(&up->pdev->dev); } static int serial_omap_poll_get_char(struct uart_port *port) { struct uart_omap_port *up = (struct uart_omap_port *)port; - unsigned int status = serial_in(up, UART_LSR); + unsigned int status; + pm_runtime_get_sync(&up->pdev->dev); + status = serial_in(up, UART_LSR); if (!(status & UART_LSR_DR)) return NO_POLL_CHAR; - return serial_in(up, UART_RX); + status = serial_in(up, UART_RX); + pm_runtime_put(&up->pdev->dev); + return status; } #endif /* CONFIG_CONSOLE_POLL */ @@ -946,6 +1009,8 @@ serial_omap_console_write(struct console *co, const char *s, unsigned int ier; int locked = 1; + pm_runtime_get_sync(&up->pdev->dev); + local_irq_save(flags); if (up->port.sysrq) locked = 0; @@ -978,6 +1043,8 @@ serial_omap_console_write(struct console *co, const char *s, if (up->msr_saved_flags) check_modem_status(up); + pm_runtime_mark_last_busy(&up->pdev->dev); + pm_runtime_put_autosuspend(&up->pdev->dev); if (locked) spin_unlock(&up->port.lock); local_irq_restore(flags); @@ -1060,24 +1127,25 @@ static struct uart_driver serial_omap_reg = { .cons = OMAP_CONSOLE, }; -static int -serial_omap_suspend(struct platform_device *pdev, pm_message_t state) +#ifdef CONFIG_SUSPEND +static int serial_omap_suspend(struct device *dev) { - struct uart_omap_port *up = platform_get_drvdata(pdev); + struct uart_omap_port *up = dev_get_drvdata(dev); if (up) uart_suspend_port(&serial_omap_reg, &up->port); return 0; } -static int serial_omap_resume(struct platform_device *dev) +static int serial_omap_resume(struct device *dev) { - struct uart_omap_port *up = platform_get_drvdata(dev); + struct uart_omap_port *up = dev_get_drvdata(dev); if (up) uart_resume_port(&serial_omap_reg, &up->port); return 0; } +#endif static void serial_omap_rx_timeout(unsigned long uart_no) { @@ -1135,6 +1203,7 @@ static int serial_omap_start_rxdma(struct uart_omap_port *up) int ret = 0; if (up->uart_dma.rx_dma_channel == -1) { + pm_runtime_get_sync(&up->pdev->dev); ret = omap_request_dma(up->uart_dma.uart_dma_rx, "UART Rx DMA", (void *)uart_rx_dma_callback, up, @@ -1299,6 +1368,14 @@ static int serial_omap_probe(struct platform_device *pdev) up->uart_dma.rx_dma_channel = OMAP_UART_DMA_CH_FREE; } + pm_runtime_use_autosuspend(&pdev->dev); + pm_runtime_set_autosuspend_delay(&pdev->dev, + OMAP_UART_AUTOSUSPEND_DELAY); + + pm_runtime_irq_safe(&pdev->dev); + pm_runtime_enable(&pdev->dev); + pm_runtime_get_sync(&pdev->dev); + ui[pdev->id] = up; serial_omap_add_console_port(up); @@ -1306,6 +1383,7 @@ static int serial_omap_probe(struct platform_device *pdev) if (ret != 0) goto do_release_region; + pm_runtime_put(&pdev->dev); platform_set_drvdata(pdev, up); return 0; err: @@ -1320,22 +1398,40 @@ static int serial_omap_remove(struct platform_device *dev) { struct uart_omap_port *up = platform_get_drvdata(dev); - platform_set_drvdata(dev, NULL); if (up) { + pm_runtime_disable(&up->pdev->dev); uart_remove_one_port(&serial_omap_reg, &up->port); kfree(up); } + + platform_set_drvdata(dev, NULL); + return 0; +} + +#ifdef CONFIG_PM_RUNTIME +static int serial_omap_runtime_suspend(struct device *dev) +{ return 0; } +static int serial_omap_runtime_resume(struct device *dev) +{ + return 0; +} +#endif + +static const struct dev_pm_ops serial_omap_dev_pm_ops = { + SET_SYSTEM_SLEEP_PM_OPS(serial_omap_suspend, serial_omap_resume) + SET_RUNTIME_PM_OPS(serial_omap_runtime_suspend, + serial_omap_runtime_resume, NULL) +}; + static struct platform_driver serial_omap_driver = { .probe = serial_omap_probe, .remove = serial_omap_remove, - - .suspend = serial_omap_suspend, - .resume = serial_omap_resume, .driver = { .name = DRIVER_NAME, + .pm = &serial_omap_dev_pm_ops, }, }; -- cgit v1.2.3 From 9f9ac1e84a24670eea1430040e0aef278b4daffa Mon Sep 17 00:00:00 2001 From: "Govindraj.R" Date: Mon, 7 Nov 2011 18:56:12 +0530 Subject: ARM: OMAP2+: UART: Remove context_save and move context restore to driver Remove context save function from serial.c and move context restore function to omap-serial. Remove all regs stored in omap_uart_state for contex_save/restore, reg read write funcs used in context_save/restore, io_addresses populated for read/write funcs. Clock gating mechanism was done in serial.c and had no info on uart state thus we needed context save and restore in serial.c With runtime conversion and clock gating done within uart driver context restore can be done from regs value available from uart_omap_port structure. Signed-off-by: Govindraj.R Acked-by: Greg Kroah-Hartman (for drivers/tty changes) Signed-off-by: Kevin Hilman --- arch/arm/mach-omap2/serial.c | 118 --------------------------------------- drivers/tty/serial/omap-serial.c | 24 ++++++++ 2 files changed, 24 insertions(+), 118 deletions(-) (limited to 'drivers/tty') diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c index 2456cfdad78c..64b0d11ddc49 100644 --- a/arch/arm/mach-omap2/serial.c +++ b/arch/arm/mach-omap2/serial.c @@ -41,8 +41,6 @@ #include "control.h" #include "mux.h" -#define UART_OMAP_WER 0x17 /* Wake-up enable register */ - #define UART_ERRATA_i202_MDR1_ACCESS (0x1 << 1) /* @@ -66,60 +64,16 @@ struct omap_uart_state { int clocked; - int regshift; - void __iomem *membase; - resource_size_t mapbase; - struct list_head node; struct omap_hwmod *oh; struct platform_device *pdev; u32 errata; -#if defined(CONFIG_ARCH_OMAP3) && defined(CONFIG_PM) - int context_valid; - - /* Registers to be saved/restored for OFF-mode */ - u16 dll; - u16 dlh; - u16 ier; - u16 sysc; - u16 scr; - u16 wer; - u16 mcr; -#endif }; static LIST_HEAD(uart_list); static u8 num_uarts; -static inline unsigned int __serial_read_reg(struct uart_port *up, - int offset) -{ - offset <<= up->regshift; - return (unsigned int)__raw_readb(up->membase + offset); -} - -static inline unsigned int serial_read_reg(struct omap_uart_state *uart, - int offset) -{ - offset <<= uart->regshift; - return (unsigned int)__raw_readb(uart->membase + offset); -} - -static inline void __serial_write_reg(struct uart_port *up, int offset, - int value) -{ - offset <<= up->regshift; - __raw_writeb(value, up->membase + offset); -} - -static inline void serial_write_reg(struct omap_uart_state *uart, int offset, - int value) -{ - offset <<= uart->regshift; - __raw_writeb(value, uart->membase + offset); -} - /* * Internal UARTs need to be initialized for the 8250 autoconfig to work * properly. Note that the TX watermark initialization may not be needed @@ -170,75 +124,6 @@ static void omap_uart_mdr1_errataset(struct omap_uart_state *uart, u8 mdr1_val, } } -static void omap_uart_save_context(struct omap_uart_state *uart) -{ - u16 lcr = 0; - - if (!enable_off_mode) - return; - - lcr = serial_read_reg(uart, UART_LCR); - serial_write_reg(uart, UART_LCR, UART_LCR_CONF_MODE_B); - uart->dll = serial_read_reg(uart, UART_DLL); - uart->dlh = serial_read_reg(uart, UART_DLM); - serial_write_reg(uart, UART_LCR, lcr); - uart->ier = serial_read_reg(uart, UART_IER); - uart->sysc = serial_read_reg(uart, UART_OMAP_SYSC); - uart->scr = serial_read_reg(uart, UART_OMAP_SCR); - uart->wer = serial_read_reg(uart, UART_OMAP_WER); - serial_write_reg(uart, UART_LCR, UART_LCR_CONF_MODE_A); - uart->mcr = serial_read_reg(uart, UART_MCR); - serial_write_reg(uart, UART_LCR, lcr); - - uart->context_valid = 1; -} - -static void omap_uart_restore_context(struct omap_uart_state *uart) -{ - u16 efr = 0; - - if (!enable_off_mode) - return; - - if (!uart->context_valid) - return; - - uart->context_valid = 0; - - if (uart->errata & UART_ERRATA_i202_MDR1_ACCESS) - omap_uart_mdr1_errataset(uart, UART_OMAP_MDR1_DISABLE, 0xA0); - else - serial_write_reg(uart, UART_OMAP_MDR1, UART_OMAP_MDR1_DISABLE); - - serial_write_reg(uart, UART_LCR, UART_LCR_CONF_MODE_B); - efr = serial_read_reg(uart, UART_EFR); - serial_write_reg(uart, UART_EFR, UART_EFR_ECB); - serial_write_reg(uart, UART_LCR, 0x0); /* Operational mode */ - serial_write_reg(uart, UART_IER, 0x0); - serial_write_reg(uart, UART_LCR, UART_LCR_CONF_MODE_B); - serial_write_reg(uart, UART_DLL, uart->dll); - serial_write_reg(uart, UART_DLM, uart->dlh); - serial_write_reg(uart, UART_LCR, 0x0); /* Operational mode */ - serial_write_reg(uart, UART_IER, uart->ier); - serial_write_reg(uart, UART_LCR, UART_LCR_CONF_MODE_A); - serial_write_reg(uart, UART_MCR, uart->mcr); - serial_write_reg(uart, UART_LCR, UART_LCR_CONF_MODE_B); - serial_write_reg(uart, UART_EFR, efr); - serial_write_reg(uart, UART_LCR, UART_LCR_WLEN8); - serial_write_reg(uart, UART_OMAP_SCR, uart->scr); - serial_write_reg(uart, UART_OMAP_WER, uart->wer); - serial_write_reg(uart, UART_OMAP_SYSC, uart->sysc); - - if (uart->errata & UART_ERRATA_i202_MDR1_ACCESS) - omap_uart_mdr1_errataset(uart, UART_OMAP_MDR1_16X_MODE, 0xA1); - else - /* UART 16x mode */ - serial_write_reg(uart, UART_OMAP_MDR1, - UART_OMAP_MDR1_16X_MODE); -} -#else -static inline void omap_uart_save_context(struct omap_uart_state *uart) {} -static inline void omap_uart_restore_context(struct omap_uart_state *uart) {} #endif /* CONFIG_PM && CONFIG_ARCH_OMAP3 */ static inline void omap_uart_enable_clocks(struct omap_uart_state *uart) @@ -621,9 +506,6 @@ void __init omap_serial_init_port(struct omap_board_data *bdata) omap_device_disable_idle_on_suspend(pdev); oh->mux = omap_hwmod_mux_init(bdata->pads, bdata->pads_cnt); - uart->regshift = 2; - uart->mapbase = oh->slaves[0]->addr->pa_start; - uart->membase = omap_hwmod_get_mpu_rt_va(oh); uart->pdev = pdev; oh->dev_attr = uart; diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c index f16ef4b9363d..a834e913a6e4 100644 --- a/drivers/tty/serial/omap-serial.c +++ b/drivers/tty/serial/omap-serial.c @@ -1408,6 +1408,25 @@ static int serial_omap_remove(struct platform_device *dev) return 0; } +static void serial_omap_restore_context(struct uart_omap_port *up) +{ + serial_out(up, UART_OMAP_MDR1, UART_OMAP_MDR1_DISABLE); + serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); /* Config B mode */ + serial_out(up, UART_EFR, UART_EFR_ECB); + serial_out(up, UART_LCR, 0x0); /* Operational mode */ + serial_out(up, UART_IER, 0x0); + serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); /* Config B mode */ + serial_out(up, UART_LCR, 0x0); /* Operational mode */ + serial_out(up, UART_IER, up->ier); + serial_out(up, UART_FCR, up->fcr); + serial_out(up, UART_LCR, UART_LCR_CONF_MODE_A); + serial_out(up, UART_MCR, up->mcr); + serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); /* Config B mode */ + serial_out(up, UART_EFR, up->efr); + serial_out(up, UART_LCR, up->lcr); + serial_out(up, UART_OMAP_MDR1, UART_OMAP_MDR1_16X_MODE); +} + #ifdef CONFIG_PM_RUNTIME static int serial_omap_runtime_suspend(struct device *dev) { @@ -1416,6 +1435,11 @@ static int serial_omap_runtime_suspend(struct device *dev) static int serial_omap_runtime_resume(struct device *dev) { + struct uart_omap_port *up = dev_get_drvdata(dev); + + if (up) + serial_omap_restore_context(up); + return 0; } #endif -- cgit v1.2.3 From c538d20c7f437e56c5301357c492230d1d6d1b80 Mon Sep 17 00:00:00 2001 From: "Govindraj.R" Date: Mon, 7 Nov 2011 18:57:03 +0530 Subject: ARM: OMAP2+: UART: Ensure all reg values configured are available from port structure Add missing uart regs to uart_port structure which can be used in context restore. Store dll, dlh, mdr1, scr, efr, lcr, mcr reg values into uart_port structure while configuring individual port in termios function. Signed-off-by: Govindraj.R Acked-by: Greg Kroah-Hartman (for drivers/tty changes) Signed-off-by: Kevin Hilman --- arch/arm/plat-omap/include/plat/omap-serial.h | 4 +++ drivers/tty/serial/omap-serial.c | 43 ++++++++++++++++----------- 2 files changed, 30 insertions(+), 17 deletions(-) (limited to 'drivers/tty') diff --git a/arch/arm/plat-omap/include/plat/omap-serial.h b/arch/arm/plat-omap/include/plat/omap-serial.h index db9bda978767..70e7738dd3a0 100644 --- a/arch/arm/plat-omap/include/plat/omap-serial.h +++ b/arch/arm/plat-omap/include/plat/omap-serial.h @@ -97,6 +97,10 @@ struct uart_omap_port { unsigned char mcr; unsigned char fcr; unsigned char efr; + unsigned char dll; + unsigned char dlh; + unsigned char mdr1; + unsigned char scr; int use_dma; /* diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c index a834e913a6e4..5327ff0b008e 100644 --- a/drivers/tty/serial/omap-serial.c +++ b/drivers/tty/serial/omap-serial.c @@ -466,8 +466,9 @@ static void serial_omap_set_mctrl(struct uart_port *port, unsigned int mctrl) mcr |= UART_MCR_LOOP; pm_runtime_get_sync(&up->pdev->dev); - mcr |= up->mcr; - serial_out(up, UART_MCR, mcr); + up->mcr = serial_in(up, UART_MCR); + up->mcr |= mcr; + serial_out(up, UART_MCR, up->mcr); pm_runtime_put(&up->pdev->dev); } @@ -616,8 +617,6 @@ static inline void serial_omap_configure_xonxoff (struct uart_omap_port *up, struct ktermios *termios) { - unsigned char efr = 0; - up->lcr = serial_in(up, UART_LCR); serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); up->efr = serial_in(up, UART_EFR); @@ -627,8 +626,7 @@ serial_omap_configure_xonxoff serial_out(up, UART_XOFF1, termios->c_cc[VSTOP]); /* clear SW control mode bits */ - efr = up->efr; - efr &= OMAP_UART_SW_CLR; + up->efr &= OMAP_UART_SW_CLR; /* * IXON Flag: @@ -636,7 +634,7 @@ serial_omap_configure_xonxoff * Transmit XON1, XOFF1 */ if (termios->c_iflag & IXON) - efr |= OMAP_UART_SW_TX; + up->efr |= OMAP_UART_SW_TX; /* * IXOFF Flag: @@ -644,7 +642,7 @@ serial_omap_configure_xonxoff * Receiver compares XON1, XOFF1. */ if (termios->c_iflag & IXOFF) - efr |= OMAP_UART_SW_RX; + up->efr |= OMAP_UART_SW_RX; serial_out(up, UART_EFR, up->efr | UART_EFR_ECB); serial_out(up, UART_LCR, UART_LCR_CONF_MODE_A); @@ -667,7 +665,7 @@ serial_omap_configure_xonxoff * load the new software flow control mode IXON or IXOFF * and restore the UARTi.EFR_REG[4] ENHANCED_EN value. */ - serial_out(up, UART_EFR, efr | UART_EFR_SCD); + serial_out(up, UART_EFR, up->efr | UART_EFR_SCD); serial_out(up, UART_LCR, UART_LCR_CONF_MODE_A); serial_out(up, UART_MCR, up->mcr & ~UART_MCR_TCRTLR); @@ -714,6 +712,10 @@ serial_omap_set_termios(struct uart_port *port, struct ktermios *termios, baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/13); quot = serial_omap_get_divisor(port, baud); + up->dll = quot & 0xff; + up->dlh = quot >> 8; + up->mdr1 = UART_OMAP_MDR1_DISABLE; + up->fcr = UART_FCR_R_TRIG_01 | UART_FCR_T_TRIG_01 | UART_FCR_ENABLE_FIFO; if (up->use_dma) @@ -767,6 +769,7 @@ serial_omap_set_termios(struct uart_port *port, struct ktermios *termios, up->ier |= UART_IER_MSI; serial_out(up, UART_IER, up->ier); serial_out(up, UART_LCR, cval); /* reset DLAB */ + up->lcr = cval; /* FIFOs and DMA Settings */ @@ -793,17 +796,18 @@ serial_omap_set_termios(struct uart_port *port, struct ktermios *termios, if (up->use_dma) { serial_out(up, UART_TI752_TLR, 0); - serial_out(up, UART_OMAP_SCR, - (UART_FCR_TRIGGER_4 | UART_FCR_TRIGGER_8)); + up->scr |= (UART_FCR_TRIGGER_4 | UART_FCR_TRIGGER_8); } + serial_out(up, UART_OMAP_SCR, up->scr); + serial_out(up, UART_EFR, up->efr); serial_out(up, UART_LCR, UART_LCR_CONF_MODE_A); serial_out(up, UART_MCR, up->mcr); /* Protocol, Baud Rate, and Interrupt Settings */ - serial_out(up, UART_OMAP_MDR1, UART_OMAP_MDR1_DISABLE); + serial_out(up, UART_OMAP_MDR1, up->mdr1); serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); up->efr = serial_in(up, UART_EFR); @@ -813,8 +817,8 @@ serial_omap_set_termios(struct uart_port *port, struct ktermios *termios, serial_out(up, UART_IER, 0); serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); - serial_out(up, UART_DLL, quot & 0xff); /* LS of divisor */ - serial_out(up, UART_DLM, quot >> 8); /* MS of divisor */ + serial_out(up, UART_DLL, up->dll); /* LS of divisor */ + serial_out(up, UART_DLM, up->dlh); /* MS of divisor */ serial_out(up, UART_LCR, 0); serial_out(up, UART_IER, up->ier); @@ -824,9 +828,11 @@ serial_omap_set_termios(struct uart_port *port, struct ktermios *termios, serial_out(up, UART_LCR, cval); if (baud > 230400 && baud != 3000000) - serial_out(up, UART_OMAP_MDR1, UART_OMAP_MDR1_13X_MODE); + up->mdr1 = UART_OMAP_MDR1_13X_MODE; else - serial_out(up, UART_OMAP_MDR1, UART_OMAP_MDR1_16X_MODE); + up->mdr1 = UART_OMAP_MDR1_16X_MODE; + + serial_out(up, UART_OMAP_MDR1, up->mdr1); /* Hardware Flow Control Configuration */ @@ -1416,15 +1422,18 @@ static void serial_omap_restore_context(struct uart_omap_port *up) serial_out(up, UART_LCR, 0x0); /* Operational mode */ serial_out(up, UART_IER, 0x0); serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); /* Config B mode */ + serial_out(up, UART_DLL, up->dll); + serial_out(up, UART_DLM, up->dlh); serial_out(up, UART_LCR, 0x0); /* Operational mode */ serial_out(up, UART_IER, up->ier); serial_out(up, UART_FCR, up->fcr); serial_out(up, UART_LCR, UART_LCR_CONF_MODE_A); serial_out(up, UART_MCR, up->mcr); serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); /* Config B mode */ + serial_out(up, UART_OMAP_SCR, up->scr); serial_out(up, UART_EFR, up->efr); serial_out(up, UART_LCR, up->lcr); - serial_out(up, UART_OMAP_MDR1, UART_OMAP_MDR1_16X_MODE); + serial_out(up, UART_OMAP_MDR1, up->mdr1); } #ifdef CONFIG_PM_RUNTIME -- cgit v1.2.3 From 32212897eeb8c2b2b3c74dbd44d842963084d808 Mon Sep 17 00:00:00 2001 From: "Govindraj.R" Date: Mon, 7 Nov 2011 18:58:55 +0530 Subject: ARM: OMAP2+: UART: Remove uart reset function. Remove the uart reset function which is configuring the TX empty irq which can now be handled within omap-serial driver. Signed-off-by: Govindraj.R Acked-by: Greg Kroah-Hartman (for drivers/tty changes) Signed-off-by: Kevin Hilman --- arch/arm/mach-omap2/serial.c | 14 -------------- arch/arm/plat-omap/include/plat/omap-serial.h | 2 ++ drivers/tty/serial/omap-serial.c | 1 + 3 files changed, 3 insertions(+), 14 deletions(-) (limited to 'drivers/tty') diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c index 64b0d11ddc49..b3f3284bf6ba 100644 --- a/arch/arm/mach-omap2/serial.c +++ b/arch/arm/mach-omap2/serial.c @@ -74,19 +74,6 @@ struct omap_uart_state { static LIST_HEAD(uart_list); static u8 num_uarts; -/* - * Internal UARTs need to be initialized for the 8250 autoconfig to work - * properly. Note that the TX watermark initialization may not be needed - * once the 8250.c watermark handling code is merged. - */ - -static inline void __init omap_uart_reset(struct omap_uart_state *uart) -{ - serial_write_reg(uart, UART_OMAP_MDR1, UART_OMAP_MDR1_DISABLE); - serial_write_reg(uart, UART_OMAP_SCR, 0x08); - serial_write_reg(uart, UART_OMAP_MDR1, UART_OMAP_MDR1_16X_MODE); -} - #if defined(CONFIG_PM) && defined(CONFIG_ARCH_OMAP3) /* @@ -521,7 +508,6 @@ void __init omap_serial_init_port(struct omap_board_data *bdata) omap_device_enable(uart->pdev); omap_uart_idle_init(uart); - omap_uart_reset(uart); omap_hwmod_enable_wakeup(uart->oh); omap_device_idle(uart->pdev); diff --git a/arch/arm/plat-omap/include/plat/omap-serial.h b/arch/arm/plat-omap/include/plat/omap-serial.h index 70e7738dd3a0..5b913c71cd7f 100644 --- a/arch/arm/plat-omap/include/plat/omap-serial.h +++ b/arch/arm/plat-omap/include/plat/omap-serial.h @@ -33,6 +33,8 @@ #define OMAP_MODE13X_SPEED 230400 +#define OMAP_UART_SCR_TX_EMPTY 0x08 + /* WER = 0x7F * Enable module level wakeup in WER reg */ diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c index 5327ff0b008e..f5a5ed676825 100644 --- a/drivers/tty/serial/omap-serial.c +++ b/drivers/tty/serial/omap-serial.c @@ -770,6 +770,7 @@ serial_omap_set_termios(struct uart_port *port, struct ktermios *termios, serial_out(up, UART_IER, up->ier); serial_out(up, UART_LCR, cval); /* reset DLAB */ up->lcr = cval; + up->scr = OMAP_UART_SCR_TX_EMPTY; /* FIFOs and DMA Settings */ -- cgit v1.2.3 From ec3bebc6ec64aac23500e6b8ef5c0aaaeda735cf Mon Sep 17 00:00:00 2001 From: "Govindraj.R" Date: Tue, 11 Oct 2011 19:11:27 +0530 Subject: ARM: OMAP2+: UART: Get context loss count to context restore Avoid unconditional context restore every time we gate uart clocks. Check whether context loss happened based on which we can context restore uart regs from uart_port structure. Signed-off-by: Govindraj.R Acked-by: Greg Kroah-Hartman (for drivers/tty changes) Signed-off-by: Kevin Hilman --- arch/arm/mach-omap2/serial.c | 2 ++ arch/arm/plat-omap/include/plat/omap-serial.h | 3 +++ drivers/tty/serial/omap-serial.c | 20 ++++++++++++++++++-- 3 files changed, 23 insertions(+), 2 deletions(-) (limited to 'drivers/tty') diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c index b3f3284bf6ba..78ca7e8fc10b 100644 --- a/arch/arm/mach-omap2/serial.c +++ b/arch/arm/mach-omap2/serial.c @@ -33,6 +33,7 @@ #include #include #include +#include #include "prm2xxx_3xxx.h" #include "pm.h" @@ -478,6 +479,7 @@ void __init omap_serial_init_port(struct omap_board_data *bdata) omap_up.dma_enabled = uart->dma_enabled; omap_up.uartclk = OMAP24XX_BASE_BAUD * 16; omap_up.flags = UPF_BOOT_AUTOCONF; + omap_up.get_context_loss_count = omap_pm_get_dev_context_loss_count; pdata = &omap_up; pdata_size = sizeof(struct omap_uart_port_info); diff --git a/arch/arm/plat-omap/include/plat/omap-serial.h b/arch/arm/plat-omap/include/plat/omap-serial.h index 5b913c71cd7f..348c9ead6edb 100644 --- a/arch/arm/plat-omap/include/plat/omap-serial.h +++ b/arch/arm/plat-omap/include/plat/omap-serial.h @@ -62,6 +62,8 @@ struct omap_uart_port_info { bool dma_enabled; /* To specify DMA Mode */ unsigned int uartclk; /* UART clock rate */ upf_t flags; /* UPF_* flags */ + + int (*get_context_loss_count)(struct device *); }; struct uart_omap_dma { @@ -114,6 +116,7 @@ struct uart_omap_port { unsigned char msr_saved_flags; char name[20]; unsigned long port_activity; + u32 context_loss_cnt; }; #endif /* __OMAP_SERIAL_H__ */ diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c index f5a5ed676825..ea4c24aa8c87 100644 --- a/drivers/tty/serial/omap-serial.c +++ b/drivers/tty/serial/omap-serial.c @@ -1440,15 +1440,31 @@ static void serial_omap_restore_context(struct uart_omap_port *up) #ifdef CONFIG_PM_RUNTIME static int serial_omap_runtime_suspend(struct device *dev) { + struct uart_omap_port *up = dev_get_drvdata(dev); + struct omap_uart_port_info *pdata = dev->platform_data; + + if (!up) + return -EINVAL; + + if (pdata->get_context_loss_count) + up->context_loss_cnt = pdata->get_context_loss_count(dev); + return 0; } static int serial_omap_runtime_resume(struct device *dev) { struct uart_omap_port *up = dev_get_drvdata(dev); + struct omap_uart_port_info *pdata = dev->platform_data; - if (up) - serial_omap_restore_context(up); + if (up) { + if (pdata->get_context_loss_count) { + u32 loss_cnt = pdata->get_context_loss_count(dev); + + if (up->context_loss_cnt != loss_cnt) + serial_omap_restore_context(up); + } + } return 0; } -- cgit v1.2.3 From 94734749af794c080f6af6ac3ce8c1c13ee2dbbd Mon Sep 17 00:00:00 2001 From: "Govindraj.R" Date: Mon, 7 Nov 2011 19:00:33 +0530 Subject: ARM: OMAP2+: UART: Move errata handling from serial.c to omap-serial Move the errata handling mechanism from serial.c to omap-serial file and utilise the same func in driver file. Errata i202, i291 are moved to be handled with omap-serial Moving the errata macro from serial.c file to driver header file as from on errata will be handled in driver file itself. Corrected errata id from chapter reference 2.15 to errata id i291. Removed errata and dma_enabled fields from omap_uart_state struct as they are no more needed with errata handling done within omap-serial. Signed-off-by: Govindraj.R Acked-by: Alan Cox Acked-by: Greg Kroah-Hartman Signed-off-by: Kevin Hilman --- arch/arm/mach-omap2/serial.c | 101 ++++++++------------------ arch/arm/plat-omap/include/plat/omap-serial.h | 7 ++ drivers/tty/serial/omap-serial.c | 68 ++++++++++++++++- 3 files changed, 102 insertions(+), 74 deletions(-) (limited to 'drivers/tty') diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c index 78ca7e8fc10b..77a25cb1dcca 100644 --- a/arch/arm/mach-omap2/serial.c +++ b/arch/arm/mach-omap2/serial.c @@ -42,8 +42,6 @@ #include "control.h" #include "mux.h" -#define UART_ERRATA_i202_MDR1_ACCESS (0x1 << 1) - /* * NOTE: By default the serial timeout is disabled as it causes lost characters * over the serial ports. This means that the UART clocks will stay on until @@ -61,59 +59,17 @@ struct omap_uart_state { void __iomem *wk_st; void __iomem *wk_en; u32 wk_mask; - u32 dma_enabled; int clocked; struct list_head node; struct omap_hwmod *oh; struct platform_device *pdev; - - u32 errata; }; static LIST_HEAD(uart_list); static u8 num_uarts; -#if defined(CONFIG_PM) && defined(CONFIG_ARCH_OMAP3) - -/* - * Work Around for Errata i202 (3430 - 1.12, 3630 - 1.6) - * The access to uart register after MDR1 Access - * causes UART to corrupt data. - * - * Need a delay = - * 5 L4 clock cycles + 5 UART functional clock cycle (@48MHz = ~0.2uS) - * give 10 times as much - */ -static void omap_uart_mdr1_errataset(struct omap_uart_state *uart, u8 mdr1_val, - u8 fcr_val) -{ - u8 timeout = 255; - - serial_write_reg(uart, UART_OMAP_MDR1, mdr1_val); - udelay(2); - serial_write_reg(uart, UART_FCR, fcr_val | UART_FCR_CLEAR_XMIT | - UART_FCR_CLEAR_RCVR); - /* - * Wait for FIFO to empty: when empty, RX_FIFO_E bit is 0 and - * TX_FIFO_E bit is 1. - */ - while (UART_LSR_THRE != (serial_read_reg(uart, UART_LSR) & - (UART_LSR_THRE | UART_LSR_DR))) { - timeout--; - if (!timeout) { - /* Should *never* happen. we warn and carry on */ - dev_crit(&uart->pdev->dev, "Errata i202: timedout %x\n", - serial_read_reg(uart, UART_LSR)); - break; - } - udelay(1); - } -} - -#endif /* CONFIG_PM && CONFIG_ARCH_OMAP3 */ - static inline void omap_uart_enable_clocks(struct omap_uart_state *uart) { if (uart->clocked) @@ -156,27 +112,6 @@ static void omap_uart_disable_wakeup(struct omap_uart_state *uart) } } -static void omap_uart_smart_idle_enable(struct omap_uart_state *uart, - int enable) -{ - u8 idlemode; - - if (enable) { - /** - * Errata 2.15: [UART]:Cannot Acknowledge Idle Requests - * in Smartidle Mode When Configured for DMA Operations. - */ - if (uart->dma_enabled) - idlemode = HWMOD_IDLEMODE_FORCE; - else - idlemode = HWMOD_IDLEMODE_SMART; - } else { - idlemode = HWMOD_IDLEMODE_NO; - } - - omap_hwmod_set_slave_idlemode(uart->oh, idlemode); -} - static void omap_uart_block_sleep(struct omap_uart_state *uart) { omap_uart_enable_clocks(uart); @@ -267,7 +202,28 @@ static void omap_uart_idle_init(struct omap_uart_state *uart) } } +/* + * Errata i291: [UART]:Cannot Acknowledge Idle Requests + * in Smartidle Mode When Configured for DMA Operations. + * WA: configure uart in force idle mode. + */ +static void omap_uart_set_noidle(struct platform_device *pdev) +{ + struct omap_device *od = to_omap_device(pdev); + + omap_hwmod_set_slave_idlemode(od->hwmods[0], HWMOD_IDLEMODE_NO); +} + +static void omap_uart_set_forceidle(struct platform_device *pdev) +{ + struct omap_device *od = to_omap_device(pdev); + + omap_hwmod_set_slave_idlemode(od->hwmods[0], HWMOD_IDLEMODE_FORCE); +} + #else +static void omap_uart_set_noidle(struct platform_device *pdev) {} +static void omap_uart_set_forceidle(struct platform_device *pdev) {} static void omap_uart_block_sleep(struct omap_uart_state *uart) { /* Needed to enable UART clocks when built without CONFIG_PM */ @@ -473,13 +429,22 @@ void __init omap_serial_init_port(struct omap_board_data *bdata) break; oh = uart->oh; - uart->dma_enabled = 0; name = DRIVER_NAME; omap_up.dma_enabled = uart->dma_enabled; omap_up.uartclk = OMAP24XX_BASE_BAUD * 16; omap_up.flags = UPF_BOOT_AUTOCONF; omap_up.get_context_loss_count = omap_pm_get_dev_context_loss_count; + omap_up.set_forceidle = omap_uart_set_forceidle; + omap_up.set_noidle = omap_uart_set_noidle; + + /* Enable the MDR1 Errata i202 for OMAP2430/3xxx/44xx */ + if (!cpu_is_omap2420() && !cpu_is_ti816x()) + omap_up.errata |= UART_ERRATA_i202_MDR1_ACCESS; + + /* Enable DMA Mode Force Idle Errata i291 for omap34xx/3630 */ + if (cpu_is_omap34xx() || cpu_is_omap3630()) + omap_up.errata |= UART_ERRATA_i291_DMA_FORCEIDLE; pdata = &omap_up; pdata_size = sizeof(struct omap_uart_port_info); @@ -519,10 +484,6 @@ void __init omap_serial_init_port(struct omap_board_data *bdata) if (((cpu_is_omap34xx() || cpu_is_omap44xx()) && bdata->pads) || (pdata->wk_en && pdata->wk_mask)) device_init_wakeup(&pdev->dev, true); - - /* Enable the MDR1 errata for OMAP3 */ - if (cpu_is_omap34xx() && !(cpu_is_ti81xx() || cpu_is_am33xx())) - uart->errata |= UART_ERRATA_i202_MDR1_ACCESS; } /** diff --git a/arch/arm/plat-omap/include/plat/omap-serial.h b/arch/arm/plat-omap/include/plat/omap-serial.h index 348c9ead6edb..842b429cfeaa 100644 --- a/arch/arm/plat-omap/include/plat/omap-serial.h +++ b/arch/arm/plat-omap/include/plat/omap-serial.h @@ -58,12 +58,18 @@ #define MSR_SAVE_FLAGS UART_MSR_ANY_DELTA +#define UART_ERRATA_i202_MDR1_ACCESS BIT(0) +#define UART_ERRATA_i291_DMA_FORCEIDLE BIT(1) + struct omap_uart_port_info { bool dma_enabled; /* To specify DMA Mode */ unsigned int uartclk; /* UART clock rate */ upf_t flags; /* UPF_* flags */ + u32 errata; int (*get_context_loss_count)(struct device *); + void (*set_forceidle)(struct platform_device *); + void (*set_noidle)(struct platform_device *); }; struct uart_omap_dma { @@ -117,6 +123,7 @@ struct uart_omap_port { char name[20]; unsigned long port_activity; u32 context_loss_cnt; + u32 errata; }; #endif /* __OMAP_SERIAL_H__ */ diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c index ea4c24aa8c87..764ac7795694 100644 --- a/drivers/tty/serial/omap-serial.c +++ b/drivers/tty/serial/omap-serial.c @@ -51,6 +51,7 @@ static struct uart_omap_port *ui[OMAP_MAX_HSUART_PORTS]; static void uart_tx_dma_callback(int lch, u16 ch_status, void *data); static void serial_omap_rx_timeout(unsigned long uart_no); static int serial_omap_start_rxdma(struct uart_omap_port *up); +static void serial_omap_mdr1_errataset(struct uart_omap_port *up, u8 mdr1); static inline unsigned int serial_in(struct uart_omap_port *up, int offset) { @@ -808,7 +809,11 @@ serial_omap_set_termios(struct uart_port *port, struct ktermios *termios, /* Protocol, Baud Rate, and Interrupt Settings */ - serial_out(up, UART_OMAP_MDR1, up->mdr1); + if (up->errata & UART_ERRATA_i202_MDR1_ACCESS) + serial_omap_mdr1_errataset(up, up->mdr1); + else + serial_out(up, UART_OMAP_MDR1, up->mdr1); + serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); up->efr = serial_in(up, UART_EFR); @@ -833,7 +838,10 @@ serial_omap_set_termios(struct uart_port *port, struct ktermios *termios, else up->mdr1 = UART_OMAP_MDR1_16X_MODE; - serial_out(up, UART_OMAP_MDR1, up->mdr1); + if (up->errata & UART_ERRATA_i202_MDR1_ACCESS) + serial_omap_mdr1_errataset(up, up->mdr1); + else + serial_out(up, UART_OMAP_MDR1, up->mdr1); /* Hardware Flow Control Configuration */ @@ -1362,6 +1370,7 @@ static int serial_omap_probe(struct platform_device *pdev) up->port.flags = omap_up_info->flags; up->port.uartclk = omap_up_info->uartclk; up->uart_dma.uart_base = mem->start; + up->errata = omap_up_info->errata; if (omap_up_info->dma_enabled) { up->uart_dma.uart_dma_tx = dma_tx->start; @@ -1415,9 +1424,47 @@ static int serial_omap_remove(struct platform_device *dev) return 0; } +/* + * Work Around for Errata i202 (2430, 3430, 3630, 4430 and 4460) + * The access to uart register after MDR1 Access + * causes UART to corrupt data. + * + * Need a delay = + * 5 L4 clock cycles + 5 UART functional clock cycle (@48MHz = ~0.2uS) + * give 10 times as much + */ +static void serial_omap_mdr1_errataset(struct uart_omap_port *up, u8 mdr1) +{ + u8 timeout = 255; + + serial_out(up, UART_OMAP_MDR1, mdr1); + udelay(2); + serial_out(up, UART_FCR, up->fcr | UART_FCR_CLEAR_XMIT | + UART_FCR_CLEAR_RCVR); + /* + * Wait for FIFO to empty: when empty, RX_FIFO_E bit is 0 and + * TX_FIFO_E bit is 1. + */ + while (UART_LSR_THRE != (serial_in(up, UART_LSR) & + (UART_LSR_THRE | UART_LSR_DR))) { + timeout--; + if (!timeout) { + /* Should *never* happen. we warn and carry on */ + dev_crit(&up->pdev->dev, "Errata i202: timedout %x\n", + serial_in(up, UART_LSR)); + break; + } + udelay(1); + } +} + static void serial_omap_restore_context(struct uart_omap_port *up) { - serial_out(up, UART_OMAP_MDR1, UART_OMAP_MDR1_DISABLE); + if (up->errata & UART_ERRATA_i202_MDR1_ACCESS) + serial_omap_mdr1_errataset(up, UART_OMAP_MDR1_DISABLE); + else + serial_out(up, UART_OMAP_MDR1, UART_OMAP_MDR1_DISABLE); + serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); /* Config B mode */ serial_out(up, UART_EFR, UART_EFR_ECB); serial_out(up, UART_LCR, 0x0); /* Operational mode */ @@ -1434,7 +1481,10 @@ static void serial_omap_restore_context(struct uart_omap_port *up) serial_out(up, UART_OMAP_SCR, up->scr); serial_out(up, UART_EFR, up->efr); serial_out(up, UART_LCR, up->lcr); - serial_out(up, UART_OMAP_MDR1, up->mdr1); + if (up->errata & UART_ERRATA_i202_MDR1_ACCESS) + serial_omap_mdr1_errataset(up, up->mdr1); + else + serial_out(up, UART_OMAP_MDR1, up->mdr1); } #ifdef CONFIG_PM_RUNTIME @@ -1449,6 +1499,11 @@ static int serial_omap_runtime_suspend(struct device *dev) if (pdata->get_context_loss_count) up->context_loss_cnt = pdata->get_context_loss_count(dev); + /* Errata i291 */ + if (up->use_dma && pdata->set_forceidle && + (up->errata & UART_ERRATA_i291_DMA_FORCEIDLE)) + pdata->set_forceidle(up->pdev); + return 0; } @@ -1464,6 +1519,11 @@ static int serial_omap_runtime_resume(struct device *dev) if (up->context_loss_cnt != loss_cnt) serial_omap_restore_context(up); } + + /* Errata i291 */ + if (up->use_dma && pdata->set_noidle && + (up->errata & UART_ERRATA_i291_DMA_FORCEIDLE)) + pdata->set_noidle(up->pdev); } return 0; -- cgit v1.2.3 From 62f3ec5fbd5fddce62b7a71adc04723a5eb903da Mon Sep 17 00:00:00 2001 From: "Govindraj.R" Date: Thu, 13 Oct 2011 14:11:09 +0530 Subject: ARM: OMAP2+: UART: Add wakeup mechanism for omap-uarts From the runtime callbacks enable hwmod wakeups for uart which will internally enable io-pad wakeups for uarts if they have rx-pad pins set as wakeup capabale. Use the io-ring wakeup mechanism after uart clock gating and leave the PM_WKST set for uart to default reset values cleanup the code in serial.c which was handling PM_WKST reg. Irq_chaing(PRM_DRIVER) is used to wakeup uart after uart clocks are gated using pad wakeup mechanism. Signed-off-by: Govindraj.R Acked-by: Greg Kroah-Hartman (for drivers/tty changes) Signed-off-by: Kevin Hilman --- arch/arm/mach-omap2/serial.c | 96 ++++----------------------- arch/arm/plat-omap/include/plat/omap-serial.h | 2 + drivers/tty/serial/omap-serial.c | 15 +++++ 3 files changed, 29 insertions(+), 84 deletions(-) (limited to 'drivers/tty') diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c index 77a25cb1dcca..aa6f7f05a1e3 100644 --- a/arch/arm/mach-omap2/serial.c +++ b/arch/arm/mach-omap2/serial.c @@ -56,10 +56,6 @@ struct omap_uart_state { int num; int can_sleep; - void __iomem *wk_st; - void __iomem *wk_en; - u32 wk_mask; - int clocked; struct list_head node; @@ -92,26 +88,6 @@ static inline void omap_uart_disable_clocks(struct omap_uart_state *uart) omap_device_idle(uart->pdev); } -static void omap_uart_enable_wakeup(struct omap_uart_state *uart) -{ - /* Set wake-enable bit */ - if (uart->wk_en && uart->wk_mask) { - u32 v = __raw_readl(uart->wk_en); - v |= uart->wk_mask; - __raw_writel(v, uart->wk_en); - } -} - -static void omap_uart_disable_wakeup(struct omap_uart_state *uart) -{ - /* Clear wake-enable bit */ - if (uart->wk_en && uart->wk_mask) { - u32 v = __raw_readl(uart->wk_en); - v &= ~uart->wk_mask; - __raw_writel(v, uart->wk_en); - } -} - static void omap_uart_block_sleep(struct omap_uart_state *uart) { omap_uart_enable_clocks(uart); @@ -141,65 +117,17 @@ int omap_uart_can_sleep(void) return can_sleep; } -static void omap_uart_idle_init(struct omap_uart_state *uart) +static void omap_uart_enable_wakeup(struct platform_device *pdev, bool enable) { - int ret; - - uart->can_sleep = 0; - omap_uart_smart_idle_enable(uart, 0); + struct omap_device *od = to_omap_device(pdev); - if (cpu_is_omap34xx() && !(cpu_is_ti81xx() || cpu_is_am33xx())) { - u32 mod = (uart->num > 1) ? OMAP3430_PER_MOD : CORE_MOD; - u32 wk_mask = 0; + if (!od) + return; - /* XXX These PRM accesses do not belong here */ - uart->wk_en = OMAP34XX_PRM_REGADDR(mod, PM_WKEN1); - uart->wk_st = OMAP34XX_PRM_REGADDR(mod, PM_WKST1); - switch (uart->num) { - case 0: - wk_mask = OMAP3430_ST_UART1_MASK; - break; - case 1: - wk_mask = OMAP3430_ST_UART2_MASK; - break; - case 2: - wk_mask = OMAP3430_ST_UART3_MASK; - break; - case 3: - wk_mask = OMAP3630_ST_UART4_MASK; - break; - } - uart->wk_mask = wk_mask; - } else if (cpu_is_omap24xx()) { - u32 wk_mask = 0; - u32 wk_en = PM_WKEN1, wk_st = PM_WKST1; - - switch (uart->num) { - case 0: - wk_mask = OMAP24XX_ST_UART1_MASK; - break; - case 1: - wk_mask = OMAP24XX_ST_UART2_MASK; - break; - case 2: - wk_en = OMAP24XX_PM_WKEN2; - wk_st = OMAP24XX_PM_WKST2; - wk_mask = OMAP24XX_ST_UART3_MASK; - break; - } - uart->wk_mask = wk_mask; - if (cpu_is_omap2430()) { - uart->wk_en = OMAP2430_PRM_REGADDR(CORE_MOD, wk_en); - uart->wk_st = OMAP2430_PRM_REGADDR(CORE_MOD, wk_st); - } else if (cpu_is_omap2420()) { - uart->wk_en = OMAP2420_PRM_REGADDR(CORE_MOD, wk_en); - uart->wk_st = OMAP2420_PRM_REGADDR(CORE_MOD, wk_st); - } - } else { - uart->wk_en = NULL; - uart->wk_st = NULL; - uart->wk_mask = 0; - } + if (enable) + omap_hwmod_enable_wakeup(od->hwmods[0]); + else + omap_hwmod_disable_wakeup(od->hwmods[0]); } /* @@ -222,6 +150,8 @@ static void omap_uart_set_forceidle(struct platform_device *pdev) } #else +static void omap_uart_enable_wakeup(struct platform_device *pdev, bool enable) +{} static void omap_uart_set_noidle(struct platform_device *pdev) {} static void omap_uart_set_forceidle(struct platform_device *pdev) {} static void omap_uart_block_sleep(struct omap_uart_state *uart) @@ -437,6 +367,7 @@ void __init omap_serial_init_port(struct omap_board_data *bdata) omap_up.get_context_loss_count = omap_pm_get_dev_context_loss_count; omap_up.set_forceidle = omap_uart_set_forceidle; omap_up.set_noidle = omap_uart_set_noidle; + omap_up.enable_wakeup = omap_uart_enable_wakeup; /* Enable the MDR1 Errata i202 for OMAP2430/3xxx/44xx */ if (!cpu_is_omap2420() && !cpu_is_ti816x()) @@ -474,15 +405,12 @@ void __init omap_serial_init_port(struct omap_board_data *bdata) omap_hwmod_idle(uart->oh); omap_device_enable(uart->pdev); - omap_uart_idle_init(uart); - omap_hwmod_enable_wakeup(uart->oh); omap_device_idle(uart->pdev); omap_uart_block_sleep(uart); console_unlock(); - if (((cpu_is_omap34xx() || cpu_is_omap44xx()) && bdata->pads) || - (pdata->wk_en && pdata->wk_mask)) + if ((cpu_is_omap34xx() || cpu_is_omap44xx()) && bdata->pads) device_init_wakeup(&pdev->dev, true); } diff --git a/arch/arm/plat-omap/include/plat/omap-serial.h b/arch/arm/plat-omap/include/plat/omap-serial.h index 842b429cfeaa..39709ecfd58f 100644 --- a/arch/arm/plat-omap/include/plat/omap-serial.h +++ b/arch/arm/plat-omap/include/plat/omap-serial.h @@ -70,6 +70,7 @@ struct omap_uart_port_info { int (*get_context_loss_count)(struct device *); void (*set_forceidle)(struct platform_device *); void (*set_noidle)(struct platform_device *); + void (*enable_wakeup)(struct platform_device *, bool); }; struct uart_omap_dma { @@ -124,6 +125,7 @@ struct uart_omap_port { unsigned long port_activity; u32 context_loss_cnt; u32 errata; + u8 wakeups_enabled; }; #endif /* __OMAP_SERIAL_H__ */ diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c index 764ac7795694..45a25a01c44d 100644 --- a/drivers/tty/serial/omap-serial.c +++ b/drivers/tty/serial/omap-serial.c @@ -1496,9 +1496,24 @@ static int serial_omap_runtime_suspend(struct device *dev) if (!up) return -EINVAL; + if (!pdata->enable_wakeup) + return 0; + if (pdata->get_context_loss_count) up->context_loss_cnt = pdata->get_context_loss_count(dev); + if (device_may_wakeup(dev)) { + if (!up->wakeups_enabled) { + pdata->enable_wakeup(up->pdev, true); + up->wakeups_enabled = true; + } + } else { + if (up->wakeups_enabled) { + pdata->enable_wakeup(up->pdev, false); + up->wakeups_enabled = false; + } + } + /* Errata i291 */ if (up->use_dma && pdata->set_forceidle && (up->errata & UART_ERRATA_i291_DMA_FORCEIDLE)) -- cgit v1.2.3 From c86845db77ce220f77e6645b18800744684946ac Mon Sep 17 00:00:00 2001 From: Deepak K Date: Wed, 9 Nov 2011 17:33:38 +0530 Subject: ARM: OMAP2+: UART: Allow UART parameters to be configured from board file. The following UART parameters are defined within the UART driver: 1). Whether the UART uses DMA (dma_enabled), by default set to 0 2). The size of dma buffer (set to 4096 bytes) 3). The time after which the dma should stop if no more data is received. 4). The auto suspend delay that will be passed for pm_runtime_autosuspend where uart will be disabled after timeout Different UARTs may be used for different purpose such as the console, for interfacing bluetooth chip, for interfacing to a modem chip, etc. Therefore, it is necessary to be able to customize the above settings for a given board on a per UART basis. This change allows these parameters to be configured from the board file and allows the parameters to be configured for each UART independently. If a board does not define its own custom parameters for the UARTs, then use the default parameters in the structure "omap_serial_default_info". The default parameters are defined to be the same as the current settings in the UART driver to avoid breaking the UART for any cuurnelty supported boards. By default, make all boards use the default UART parameters. Signed-off-by: Deepak K Signed-off-by: Jon Hunter Signed-off-by: Govindraj.R Acked-by: Greg Kroah-Hartman (for drivers/tty changes) Signed-off-by: Kevin Hilman --- arch/arm/mach-omap2/board-n8x0.c | 6 +-- arch/arm/mach-omap2/serial.c | 56 +++++++++++++++++++++------ arch/arm/plat-omap/include/plat/omap-serial.h | 7 +++- arch/arm/plat-omap/include/plat/serial.h | 5 ++- drivers/tty/serial/omap-serial.c | 8 ++-- 5 files changed, 60 insertions(+), 22 deletions(-) (limited to 'drivers/tty') diff --git a/arch/arm/mach-omap2/board-n8x0.c b/arch/arm/mach-omap2/board-n8x0.c index bebd3d84365e..118f38c4b37d 100644 --- a/arch/arm/mach-omap2/board-n8x0.c +++ b/arch/arm/mach-omap2/board-n8x0.c @@ -644,15 +644,15 @@ static inline void board_serial_init(void) bdata.pads_cnt = 0; bdata.id = 0; - omap_serial_init_port(&bdata); + omap_serial_init_port(&bdata, NULL); bdata.id = 1; - omap_serial_init_port(&bdata); + omap_serial_init_port(&bdata, NULL); bdata.id = 2; bdata.pads = serial2_pads; bdata.pads_cnt = ARRAY_SIZE(serial2_pads); - omap_serial_init_port(&bdata); + omap_serial_init_port(&bdata, NULL); } #else diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c index f94394fe5b16..5b1b36a45e9c 100644 --- a/arch/arm/mach-omap2/serial.c +++ b/arch/arm/mach-omap2/serial.c @@ -43,12 +43,12 @@ #include "mux.h" /* - * NOTE: By default the serial timeout is disabled as it causes lost characters - * over the serial ports. This means that the UART clocks will stay on until - * disabled via sysfs. This also causes that any deeper omap sleep states are - * blocked. + * NOTE: By default the serial auto_suspend timeout is disabled as it causes + * lost characters over the serial ports. This means that the UART clocks will + * stay on until power/autosuspend_delay is set for the uart from sysfs. + * This also causes that any deeper omap sleep states are blocked. */ -#define DEFAULT_TIMEOUT 0 +#define DEFAULT_AUTOSUSPEND_DELAY -1 #define MAX_UART_HWMOD_NAME_LEN 16 @@ -64,6 +64,18 @@ struct omap_uart_state { static LIST_HEAD(uart_list); static u8 num_uarts; +#define DEFAULT_RXDMA_TIMEOUT 1 /* RX DMA polling rate (us) */ +#define DEFAULT_RXDMA_BUFSIZE 4096 /* RX DMA buffer size */ + +static struct omap_uart_port_info omap_serial_default_info[] __initdata = { + { + .dma_enabled = false, + .dma_rx_buf_size = DEFAULT_RXDMA_BUFSIZE, + .dma_rx_timeout = DEFAULT_RXDMA_TIMEOUT, + .autosuspend_timeout = DEFAULT_AUTOSUSPEND_DELAY, + }, +}; + #ifdef CONFIG_PM int omap_uart_can_sleep(void) @@ -294,6 +306,7 @@ core_initcall(omap_serial_early_init); /** * omap_serial_init_port() - initialize single serial port * @bdata: port specific board data pointer + * @info: platform specific data pointer * * This function initialies serial driver for given port only. * Platforms can call this function instead of omap_serial_init() @@ -302,7 +315,8 @@ core_initcall(omap_serial_early_init); * Don't mix calls to omap_serial_init_port() and omap_serial_init(), * use only one of the two. */ -void __init omap_serial_init_port(struct omap_board_data *bdata) +void __init omap_serial_init_port(struct omap_board_data *bdata, + struct omap_uart_port_info *info) { struct omap_uart_state *uart; struct omap_hwmod *oh; @@ -322,17 +336,22 @@ void __init omap_serial_init_port(struct omap_board_data *bdata) list_for_each_entry(uart, &uart_list, node) if (bdata->id == uart->num) break; + if (!info) + info = omap_serial_default_info; oh = uart->oh; name = DRIVER_NAME; - omap_up.dma_enabled = uart->dma_enabled; + omap_up.dma_enabled = info->dma_enabled; omap_up.uartclk = OMAP24XX_BASE_BAUD * 16; omap_up.flags = UPF_BOOT_AUTOCONF; omap_up.get_context_loss_count = omap_pm_get_dev_context_loss_count; omap_up.set_forceidle = omap_uart_set_forceidle; omap_up.set_noidle = omap_uart_set_noidle; omap_up.enable_wakeup = omap_uart_enable_wakeup; + omap_up.dma_rx_buf_size = info->dma_rx_buf_size; + omap_up.dma_rx_timeout = info->dma_rx_timeout; + omap_up.autosuspend_timeout = info->autosuspend_timeout; /* Enable the MDR1 Errata i202 for OMAP2430/3xxx/44xx */ if (!cpu_is_omap2420() && !cpu_is_ti816x()) @@ -379,13 +398,14 @@ void __init omap_serial_init_port(struct omap_board_data *bdata) } /** - * omap_serial_init() - initialize all supported serial ports + * omap_serial_board_init() - initialize all supported serial ports + * @info: platform specific data pointer * * Initializes all available UARTs as serial ports. Platforms * can call this function when they want to have default behaviour * for serial ports (e.g initialize them all as serial ports). */ -void __init omap_serial_init(void) +void __init omap_serial_board_init(struct omap_uart_port_info *info) { struct omap_uart_state *uart; struct omap_board_data bdata; @@ -399,7 +419,21 @@ void __init omap_serial_init(void) if (cpu_is_omap44xx() || cpu_is_omap34xx()) omap_serial_fill_default_pads(&bdata); - omap_serial_init_port(&bdata); - + if (!info) + omap_serial_init_port(&bdata, NULL); + else + omap_serial_init_port(&bdata, &info[uart->num]); } } + +/** + * omap_serial_init() - initialize all supported serial ports + * + * Initializes all available UARTs. + * Platforms can call this function when they want to have default behaviour + * for serial ports (e.g initialize them all as serial ports). + */ +void __init omap_serial_init(void) +{ + omap_serial_board_init(NULL); +} diff --git a/arch/arm/plat-omap/include/plat/omap-serial.h b/arch/arm/plat-omap/include/plat/omap-serial.h index 39709ecfd58f..a740a6c0e104 100644 --- a/arch/arm/plat-omap/include/plat/omap-serial.h +++ b/arch/arm/plat-omap/include/plat/omap-serial.h @@ -66,6 +66,9 @@ struct omap_uart_port_info { unsigned int uartclk; /* UART clock rate */ upf_t flags; /* UPF_* flags */ u32 errata; + unsigned int dma_rx_buf_size; + unsigned int dma_rx_timeout; + unsigned int autosuspend_timeout; int (*get_context_loss_count)(struct device *); void (*set_forceidle)(struct platform_device *); @@ -94,8 +97,8 @@ struct uart_omap_dma { spinlock_t rx_lock; /* timer to poll activity on rx dma */ struct timer_list rx_timer; - int rx_buf_size; - int rx_timeout; + unsigned int rx_buf_size; + unsigned int rx_timeout; }; struct uart_omap_port { diff --git a/arch/arm/plat-omap/include/plat/serial.h b/arch/arm/plat-omap/include/plat/serial.h index 152500b558a2..38b3e38df2a0 100644 --- a/arch/arm/plat-omap/include/plat/serial.h +++ b/arch/arm/plat-omap/include/plat/serial.h @@ -106,10 +106,13 @@ #ifndef __ASSEMBLER__ struct omap_board_data; +struct omap_uart_port_info; extern void omap_serial_init(void); -extern void omap_serial_init_port(struct omap_board_data *bdata); extern int omap_uart_can_sleep(void); +extern void omap_serial_board_init(struct omap_uart_port_info *platform_data); +extern void omap_serial_init_port(struct omap_board_data *bdata, + struct omap_uart_port_info *platform_data); #endif #endif diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c index 45a25a01c44d..d60e001cf60f 100644 --- a/drivers/tty/serial/omap-serial.c +++ b/drivers/tty/serial/omap-serial.c @@ -43,8 +43,6 @@ #include #include -#define OMAP_UART_AUTOSUSPEND_DELAY -1 - static struct uart_omap_port *ui[OMAP_MAX_HSUART_PORTS]; /* Forward declaration of functions */ @@ -1376,8 +1374,8 @@ static int serial_omap_probe(struct platform_device *pdev) up->uart_dma.uart_dma_tx = dma_tx->start; up->uart_dma.uart_dma_rx = dma_rx->start; up->use_dma = 1; - up->uart_dma.rx_buf_size = 4096; - up->uart_dma.rx_timeout = 2; + up->uart_dma.rx_buf_size = omap_up_info->dma_rx_buf_size; + up->uart_dma.rx_timeout = omap_up_info->dma_rx_timeout; spin_lock_init(&(up->uart_dma.tx_lock)); spin_lock_init(&(up->uart_dma.rx_lock)); up->uart_dma.tx_dma_channel = OMAP_UART_DMA_CH_FREE; @@ -1386,7 +1384,7 @@ static int serial_omap_probe(struct platform_device *pdev) pm_runtime_use_autosuspend(&pdev->dev); pm_runtime_set_autosuspend_delay(&pdev->dev, - OMAP_UART_AUTOSUSPEND_DELAY); + omap_up_info->autosuspend_timeout); pm_runtime_irq_safe(&pdev->dev); pm_runtime_enable(&pdev->dev); -- cgit v1.2.3 From a9e210e0b7a344c0e44aa6bf6888176bbc635c42 Mon Sep 17 00:00:00 2001 From: Jon Hunter Date: Wed, 9 Nov 2011 17:34:49 +0530 Subject: ARM: OMAP2+: UART: Make the RX_TIMEOUT for DMA configurable for each UART When using DMA there are two timeouts defined. The first timeout, rx_timeout, is really a polling rate in which software polls the DMA status to see if the DMA has finished. This is necessary for the RX side because we do not know how much data we will receive. The secound timeout, RX_TIMEOUT, is a timeout after which the DMA will be stopped if no more data is received. To make this clearer, rename rx_timeout as rx_poll_rate and rename the function serial_omap_rx_timeout() to serial_omap_rxdma_poll(). The OMAP-Serial driver defines an RX_TIMEOUT of 3 seconds that is used to indicate when the DMA for UART can be stopped if no more data is received. The value is a global definition that is applied to all instances of the UART. Each UART may be used for a different purpose and so the timeout required may differ. Make this value configurable for each UART so that this value can be optimised for power savings. Signed-off-by: Jon Hunter Signed-off-by: Govindraj.R Acked-by: Greg Kroah-Hartman (for drivers/tty changes) Signed-off-by: Kevin Hilman --- arch/arm/mach-omap2/serial.c | 5 ++++- arch/arm/plat-omap/include/plat/omap-serial.h | 3 ++- drivers/tty/serial/omap-serial.c | 15 ++++++++------- 3 files changed, 14 insertions(+), 9 deletions(-) (limited to 'drivers/tty') diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c index 5b1b36a45e9c..5dd928945033 100644 --- a/arch/arm/mach-omap2/serial.c +++ b/arch/arm/mach-omap2/serial.c @@ -64,13 +64,15 @@ struct omap_uart_state { static LIST_HEAD(uart_list); static u8 num_uarts; -#define DEFAULT_RXDMA_TIMEOUT 1 /* RX DMA polling rate (us) */ +#define DEFAULT_RXDMA_POLLRATE 1 /* RX DMA polling rate (us) */ #define DEFAULT_RXDMA_BUFSIZE 4096 /* RX DMA buffer size */ +#define DEFAULT_RXDMA_TIMEOUT (3 * HZ)/* RX DMA timeout (jiffies) */ static struct omap_uart_port_info omap_serial_default_info[] __initdata = { { .dma_enabled = false, .dma_rx_buf_size = DEFAULT_RXDMA_BUFSIZE, + .dma_rx_poll_rate = DEFAULT_RXDMA_POLLRATE, .dma_rx_timeout = DEFAULT_RXDMA_TIMEOUT, .autosuspend_timeout = DEFAULT_AUTOSUSPEND_DELAY, }, @@ -351,6 +353,7 @@ void __init omap_serial_init_port(struct omap_board_data *bdata, omap_up.enable_wakeup = omap_uart_enable_wakeup; omap_up.dma_rx_buf_size = info->dma_rx_buf_size; omap_up.dma_rx_timeout = info->dma_rx_timeout; + omap_up.dma_rx_poll_rate = info->dma_rx_poll_rate; omap_up.autosuspend_timeout = info->autosuspend_timeout; /* Enable the MDR1 Errata i202 for OMAP2430/3xxx/44xx */ diff --git a/arch/arm/plat-omap/include/plat/omap-serial.h b/arch/arm/plat-omap/include/plat/omap-serial.h index a740a6c0e104..ea63b2bc761c 100644 --- a/arch/arm/plat-omap/include/plat/omap-serial.h +++ b/arch/arm/plat-omap/include/plat/omap-serial.h @@ -53,7 +53,6 @@ #define OMAP_UART_DMA_CH_FREE -1 -#define RX_TIMEOUT (3 * HZ) #define OMAP_MAX_HSUART_PORTS 4 #define MSR_SAVE_FLAGS UART_MSR_ANY_DELTA @@ -69,6 +68,7 @@ struct omap_uart_port_info { unsigned int dma_rx_buf_size; unsigned int dma_rx_timeout; unsigned int autosuspend_timeout; + unsigned int dma_rx_poll_rate; int (*get_context_loss_count)(struct device *); void (*set_forceidle)(struct platform_device *); @@ -98,6 +98,7 @@ struct uart_omap_dma { /* timer to poll activity on rx dma */ struct timer_list rx_timer; unsigned int rx_buf_size; + unsigned int rx_poll_rate; unsigned int rx_timeout; }; diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c index d60e001cf60f..e1eaa66c047b 100644 --- a/drivers/tty/serial/omap-serial.c +++ b/drivers/tty/serial/omap-serial.c @@ -47,7 +47,7 @@ static struct uart_omap_port *ui[OMAP_MAX_HSUART_PORTS]; /* Forward declaration of functions */ static void uart_tx_dma_callback(int lch, u16 ch_status, void *data); -static void serial_omap_rx_timeout(unsigned long uart_no); +static void serial_omap_rxdma_poll(unsigned long uart_no); static int serial_omap_start_rxdma(struct uart_omap_port *up); static void serial_omap_mdr1_errataset(struct uart_omap_port *up, u8 mdr1); @@ -542,7 +542,7 @@ static int serial_omap_startup(struct uart_port *port) (dma_addr_t *)&(up->uart_dma.tx_buf_dma_phys), 0); init_timer(&(up->uart_dma.rx_timer)); - up->uart_dma.rx_timer.function = serial_omap_rx_timeout; + up->uart_dma.rx_timer.function = serial_omap_rxdma_poll; up->uart_dma.rx_timer.data = up->pdev->id; /* Currently the buffer size is 4KB. Can increase it */ up->uart_dma.rx_buf = dma_alloc_coherent(NULL, @@ -1160,7 +1160,7 @@ static int serial_omap_resume(struct device *dev) } #endif -static void serial_omap_rx_timeout(unsigned long uart_no) +static void serial_omap_rxdma_poll(unsigned long uart_no) { struct uart_omap_port *up = ui[uart_no]; unsigned int curr_dma_pos, curr_transmitted_size; @@ -1170,9 +1170,9 @@ static void serial_omap_rx_timeout(unsigned long uart_no) if ((curr_dma_pos == up->uart_dma.prev_rx_dma_pos) || (curr_dma_pos == 0)) { if (jiffies_to_msecs(jiffies - up->port_activity) < - RX_TIMEOUT) { + up->uart_dma.rx_timeout) { mod_timer(&up->uart_dma.rx_timer, jiffies + - usecs_to_jiffies(up->uart_dma.rx_timeout)); + usecs_to_jiffies(up->uart_dma.rx_poll_rate)); } else { serial_omap_stop_rxdma(up); up->ier |= (UART_IER_RDI | UART_IER_RLSI); @@ -1201,7 +1201,7 @@ static void serial_omap_rx_timeout(unsigned long uart_no) } } else { mod_timer(&up->uart_dma.rx_timer, jiffies + - usecs_to_jiffies(up->uart_dma.rx_timeout)); + usecs_to_jiffies(up->uart_dma.rx_poll_rate)); } up->port_activity = jiffies; } @@ -1240,7 +1240,7 @@ static int serial_omap_start_rxdma(struct uart_omap_port *up) /* FIXME: Cache maintenance needed here? */ omap_start_dma(up->uart_dma.rx_dma_channel); mod_timer(&up->uart_dma.rx_timer, jiffies + - usecs_to_jiffies(up->uart_dma.rx_timeout)); + usecs_to_jiffies(up->uart_dma.rx_poll_rate)); up->uart_dma.rx_dma_used = true; return ret; } @@ -1376,6 +1376,7 @@ static int serial_omap_probe(struct platform_device *pdev) up->use_dma = 1; up->uart_dma.rx_buf_size = omap_up_info->dma_rx_buf_size; up->uart_dma.rx_timeout = omap_up_info->dma_rx_timeout; + up->uart_dma.rx_poll_rate = omap_up_info->dma_rx_poll_rate; spin_lock_init(&(up->uart_dma.tx_lock)); spin_lock_init(&(up->uart_dma.rx_lock)); up->uart_dma.tx_dma_channel = OMAP_UART_DMA_CH_FREE; -- cgit v1.2.3 From 2fd149645eb46d26130d7070c6de037dddf34880 Mon Sep 17 00:00:00 2001 From: "Govindraj.R" Date: Wed, 9 Nov 2011 17:41:21 +0530 Subject: ARM: OMAP2+: UART: Remove omap_uart_can_sleep and add pm_qos Omap_uart_can_sleep function blocks system wide low power state until uart is active remove this func and add qos requests to prevent MPU from transitioning. Keep qos request to default value which will allow MPU to transition and while uart baud rate is available calculate the latency value from the baudrate and use the same to hold constraint while uart clocks are enabled, and if uart is auto-idled the constraint is updated with default constraint value allowing MPU to transition. Qos requests are blocking notifier calls so put these requests to work queue, also the driver uses irq_safe version of runtime API's and callbacks can be called in interrupt disabled context. So to avoid warn on slow path warning while using qos update API's from runtime callbacks use the qos_work_queue. During bootup the runtime_resume call backs might not be called and runtime callback gets called only after uart is idled by setting the autosuspend timeout. So qos_request from runtime resume callback might not activated during boot if uart baudrate is calculated during bootup for console uart, so schedule the qos_work queue once we calc_latency while configuring the uart port. Flush and complete any pending qos jobs in work queue while suspending. Signed-off-by: Govindraj.R Acked-by: Greg Kroah-Hartman (for drivers/tty changes) Signed-off-by: Kevin Hilman --- arch/arm/mach-omap2/cpuidle34xx.c | 6 ----- arch/arm/mach-omap2/pm24xx.c | 2 -- arch/arm/mach-omap2/pm34xx.c | 11 -------- arch/arm/mach-omap2/serial.c | 22 ---------------- arch/arm/plat-omap/include/plat/omap-serial.h | 6 +++++ drivers/tty/serial/omap-serial.c | 36 ++++++++++++++++++++++++++- 6 files changed, 41 insertions(+), 42 deletions(-) (limited to 'drivers/tty') diff --git a/arch/arm/mach-omap2/cpuidle34xx.c b/arch/arm/mach-omap2/cpuidle34xx.c index e20332f4abdc..3a9d2b883b34 100644 --- a/arch/arm/mach-omap2/cpuidle34xx.c +++ b/arch/arm/mach-omap2/cpuidle34xx.c @@ -30,7 +30,6 @@ #include #include "powerdomain.h" #include "clockdomain.h" -#include #include "pm.h" #include "control.h" @@ -245,11 +244,6 @@ static int omap3_enter_idle_bm(struct cpuidle_device *dev, struct omap3_idle_statedata *cx; int ret; - if (!omap3_can_sleep()) { - new_state_idx = drv->safe_state_index; - goto select_state; - } - /* * Prevent idle completely if CAM is active. * CAM does not have wakeup capability in OMAP3. diff --git a/arch/arm/mach-omap2/pm24xx.c b/arch/arm/mach-omap2/pm24xx.c index 22af2f2fdbf9..b8822f8b2891 100644 --- a/arch/arm/mach-omap2/pm24xx.c +++ b/arch/arm/mach-omap2/pm24xx.c @@ -222,8 +222,6 @@ static int omap2_can_sleep(void) { if (omap2_fclks_active()) return 0; - if (!omap_uart_can_sleep()) - return 0; if (osc_ck->usecount > 1) return 0; if (omap_dma_running()) diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index 4feee45ef069..4ee5f4eb04e4 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -35,7 +35,6 @@ #include #include "clockdomain.h" #include "powerdomain.h" -#include #include #include #include @@ -456,21 +455,11 @@ void omap_sram_idle(void) clkdm_allow_idle(mpu_pwrdm->pwrdm_clkdms[0]); } -int omap3_can_sleep(void) -{ - if (!omap_uart_can_sleep()) - return 0; - return 1; -} - static void omap3_pm_idle(void) { local_irq_disable(); local_fiq_disable(); - if (!omap3_can_sleep()) - goto out; - if (omap_irq_pending() || need_resched()) goto out; diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c index c909770eacd1..247d89478f24 100644 --- a/arch/arm/mach-omap2/serial.c +++ b/arch/arm/mach-omap2/serial.c @@ -82,28 +82,6 @@ static struct omap_uart_port_info omap_serial_default_info[] __initdata = { }; #ifdef CONFIG_PM - -int omap_uart_can_sleep(void) -{ - struct omap_uart_state *uart; - int can_sleep = 1; - - list_for_each_entry(uart, &uart_list, node) { - if (!uart->clocked) - continue; - - if (!uart->can_sleep) { - can_sleep = 0; - continue; - } - - /* This UART can now safely sleep. */ - omap_uart_allow_sleep(uart); - } - - return can_sleep; -} - static void omap_uart_enable_wakeup(struct platform_device *pdev, bool enable) { struct omap_device *od = to_omap_device(pdev); diff --git a/arch/arm/plat-omap/include/plat/omap-serial.h b/arch/arm/plat-omap/include/plat/omap-serial.h index ea63b2bc761c..9ff444469f3d 100644 --- a/arch/arm/plat-omap/include/plat/omap-serial.h +++ b/arch/arm/plat-omap/include/plat/omap-serial.h @@ -19,6 +19,7 @@ #include #include +#include #include @@ -130,6 +131,11 @@ struct uart_omap_port { u32 context_loss_cnt; u32 errata; u8 wakeups_enabled; + + struct pm_qos_request pm_qos_request; + u32 latency; + u32 calc_latency; + struct work_struct qos_work; }; #endif /* __OMAP_SERIAL_H__ */ diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c index e1eaa66c047b..f3ff0ca377c5 100644 --- a/drivers/tty/serial/omap-serial.c +++ b/drivers/tty/serial/omap-serial.c @@ -51,6 +51,8 @@ static void serial_omap_rxdma_poll(unsigned long uart_no); static int serial_omap_start_rxdma(struct uart_omap_port *up); static void serial_omap_mdr1_errataset(struct uart_omap_port *up, u8 mdr1); +static struct workqueue_struct *serial_omap_uart_wq; + static inline unsigned int serial_in(struct uart_omap_port *up, int offset) { offset <<= up->port.regshift; @@ -671,6 +673,14 @@ serial_omap_configure_xonxoff serial_out(up, UART_LCR, up->lcr); } +static void serial_omap_uart_qos_work(struct work_struct *work) +{ + struct uart_omap_port *up = container_of(work, struct uart_omap_port, + qos_work); + + pm_qos_update_request(&up->pm_qos_request, up->latency); +} + static void serial_omap_set_termios(struct uart_port *port, struct ktermios *termios, struct ktermios *old) @@ -711,6 +721,12 @@ serial_omap_set_termios(struct uart_port *port, struct ktermios *termios, baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/13); quot = serial_omap_get_divisor(port, baud); + /* calculate wakeup latency constraint */ + up->calc_latency = (1000000 * up->port.fifosize) / + (1000 * baud / 8); + up->latency = up->calc_latency; + schedule_work(&up->qos_work); + up->dll = quot & 0xff; up->dlh = quot >> 8; up->mdr1 = UART_OMAP_MDR1_DISABLE; @@ -1145,8 +1161,11 @@ static int serial_omap_suspend(struct device *dev) { struct uart_omap_port *up = dev_get_drvdata(dev); - if (up) + if (up) { uart_suspend_port(&serial_omap_reg, &up->port); + flush_work_sync(&up->qos_work); + } + return 0; } @@ -1383,6 +1402,13 @@ static int serial_omap_probe(struct platform_device *pdev) up->uart_dma.rx_dma_channel = OMAP_UART_DMA_CH_FREE; } + up->latency = PM_QOS_CPU_DMA_LAT_DEFAULT_VALUE; + up->calc_latency = PM_QOS_CPU_DMA_LAT_DEFAULT_VALUE; + pm_qos_add_request(&up->pm_qos_request, + PM_QOS_CPU_DMA_LATENCY, up->latency); + serial_omap_uart_wq = create_singlethread_workqueue(up->name); + INIT_WORK(&up->qos_work, serial_omap_uart_qos_work); + pm_runtime_use_autosuspend(&pdev->dev); pm_runtime_set_autosuspend_delay(&pdev->dev, omap_up_info->autosuspend_timeout); @@ -1416,6 +1442,8 @@ static int serial_omap_remove(struct platform_device *dev) if (up) { pm_runtime_disable(&up->pdev->dev); uart_remove_one_port(&serial_omap_reg, &up->port); + pm_qos_remove_request(&up->pm_qos_request); + kfree(up); } @@ -1518,6 +1546,9 @@ static int serial_omap_runtime_suspend(struct device *dev) (up->errata & UART_ERRATA_i291_DMA_FORCEIDLE)) pdata->set_forceidle(up->pdev); + up->latency = PM_QOS_CPU_DMA_LAT_DEFAULT_VALUE; + schedule_work(&up->qos_work); + return 0; } @@ -1538,6 +1569,9 @@ static int serial_omap_runtime_resume(struct device *dev) if (up->use_dma && pdata->set_noidle && (up->errata & UART_ERRATA_i291_DMA_FORCEIDLE)) pdata->set_noidle(up->pdev); + + up->latency = up->calc_latency; + schedule_work(&up->qos_work); } return 0; -- cgit v1.2.3 From da27468655540b083525177f5dc6f3b1f6e3b869 Mon Sep 17 00:00:00 2001 From: "Govindraj.R" Date: Wed, 14 Dec 2011 21:24:11 +0530 Subject: ARM: OMAP2+: UART: Fix compilation/sparse warnings Fixes below compilation warning. drivers/tty/serial/omap-serial.c: In function 'serial_omap_irq': drivers/tty/serial/omap-serial.c:228:29: warning: 'ch' may be used uninitialized in this function [-Wuninitialized] Fix below sparse warning. drivers/tty/serial/omap-serial.c:392:52: warning: incorrect type in argument 2 (different signedness) drivers/tty/serial/omap-serial.c:392:52: expected int *status drivers/tty/serial/omap-serial.c:392:52: got unsigned int * Reported-by: Kevin Hilman Signed-off-by: Govindraj.R Acked-by: Greg Kroah-Hartman (for drivers/tty changes) Signed-off-by: Kevin Hilman --- drivers/tty/serial/omap-serial.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) (limited to 'drivers/tty') diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c index f3ff0ca377c5..7b0303d34021 100644 --- a/drivers/tty/serial/omap-serial.c +++ b/drivers/tty/serial/omap-serial.c @@ -166,11 +166,12 @@ static void serial_omap_stop_rx(struct uart_port *port) pm_runtime_put_autosuspend(&up->pdev->dev); } -static inline void receive_chars(struct uart_omap_port *up, int *status) +static inline void receive_chars(struct uart_omap_port *up, + unsigned int *status) { struct tty_struct *tty = up->port.state->port.tty; - unsigned int flag; - unsigned char ch, lsr = *status; + unsigned int flag, lsr = *status; + unsigned char ch = 0; int max_count = 256; do { -- cgit v1.2.3 From ba77433da6e48062825169ae41d8efe7c183c3db Mon Sep 17 00:00:00 2001 From: Rajendra Nayak Date: Wed, 14 Dec 2011 17:25:43 +0530 Subject: omap-serial: Get rid of all pdev->id usage With Device tree, pdev->id would no longer be Valid. Hence get rid of all instances of its usage in the driver. Device tree support for the driver is added in subsequent patches. Signed-off-by: Rajendra Nayak Reviewed-by: Rob Herring Signed-off-by: Tony Lindgren --- drivers/tty/serial/omap-serial.c | 30 +++++++++++++++--------------- 1 file changed, 15 insertions(+), 15 deletions(-) (limited to 'drivers/tty') diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c index 7b0303d34021..1baf24b96469 100644 --- a/drivers/tty/serial/omap-serial.c +++ b/drivers/tty/serial/omap-serial.c @@ -115,7 +115,7 @@ static void serial_omap_enable_ms(struct uart_port *port) { struct uart_omap_port *up = (struct uart_omap_port *)port; - dev_dbg(up->port.dev, "serial_omap_enable_ms+%d\n", up->pdev->id); + dev_dbg(up->port.dev, "serial_omap_enable_ms+%d\n", up->port.line); pm_runtime_get_sync(&up->pdev->dev); up->ier |= UART_IER_MSI; @@ -419,7 +419,7 @@ static unsigned int serial_omap_tx_empty(struct uart_port *port) unsigned int ret = 0; pm_runtime_get_sync(&up->pdev->dev); - dev_dbg(up->port.dev, "serial_omap_tx_empty+%d\n", up->pdev->id); + dev_dbg(up->port.dev, "serial_omap_tx_empty+%d\n", up->port.line); spin_lock_irqsave(&up->port.lock, flags); ret = serial_in(up, UART_LSR) & UART_LSR_TEMT ? TIOCSER_TEMT : 0; spin_unlock_irqrestore(&up->port.lock, flags); @@ -437,7 +437,7 @@ static unsigned int serial_omap_get_mctrl(struct uart_port *port) status = check_modem_status(up); pm_runtime_put(&up->pdev->dev); - dev_dbg(up->port.dev, "serial_omap_get_mctrl+%d\n", up->pdev->id); + dev_dbg(up->port.dev, "serial_omap_get_mctrl+%d\n", up->port.line); if (status & UART_MSR_DCD) ret |= TIOCM_CAR; @@ -455,7 +455,7 @@ static void serial_omap_set_mctrl(struct uart_port *port, unsigned int mctrl) struct uart_omap_port *up = (struct uart_omap_port *)port; unsigned char mcr = 0; - dev_dbg(up->port.dev, "serial_omap_set_mctrl+%d\n", up->pdev->id); + dev_dbg(up->port.dev, "serial_omap_set_mctrl+%d\n", up->port.line); if (mctrl & TIOCM_RTS) mcr |= UART_MCR_RTS; if (mctrl & TIOCM_DTR) @@ -479,7 +479,7 @@ static void serial_omap_break_ctl(struct uart_port *port, int break_state) struct uart_omap_port *up = (struct uart_omap_port *)port; unsigned long flags = 0; - dev_dbg(up->port.dev, "serial_omap_break_ctl+%d\n", up->pdev->id); + dev_dbg(up->port.dev, "serial_omap_break_ctl+%d\n", up->port.line); pm_runtime_get_sync(&up->pdev->dev); spin_lock_irqsave(&up->port.lock, flags); if (break_state == -1) @@ -505,7 +505,7 @@ static int serial_omap_startup(struct uart_port *port) if (retval) return retval; - dev_dbg(up->port.dev, "serial_omap_startup+%d\n", up->pdev->id); + dev_dbg(up->port.dev, "serial_omap_startup+%d\n", up->port.line); pm_runtime_get_sync(&up->pdev->dev); /* @@ -546,7 +546,7 @@ static int serial_omap_startup(struct uart_port *port) 0); init_timer(&(up->uart_dma.rx_timer)); up->uart_dma.rx_timer.function = serial_omap_rxdma_poll; - up->uart_dma.rx_timer.data = up->pdev->id; + up->uart_dma.rx_timer.data = up->port.line; /* Currently the buffer size is 4KB. Can increase it */ up->uart_dma.rx_buf = dma_alloc_coherent(NULL, up->uart_dma.rx_buf_size, @@ -574,7 +574,7 @@ static void serial_omap_shutdown(struct uart_port *port) struct uart_omap_port *up = (struct uart_omap_port *)port; unsigned long flags = 0; - dev_dbg(up->port.dev, "serial_omap_shutdown+%d\n", up->pdev->id); + dev_dbg(up->port.dev, "serial_omap_shutdown+%d\n", up->port.line); pm_runtime_get_sync(&up->pdev->dev); /* @@ -884,7 +884,7 @@ serial_omap_set_termios(struct uart_port *port, struct ktermios *termios, spin_unlock_irqrestore(&up->port.lock, flags); pm_runtime_put(&up->pdev->dev); - dev_dbg(up->port.dev, "serial_omap_set_termios+%d\n", up->pdev->id); + dev_dbg(up->port.dev, "serial_omap_set_termios+%d\n", up->port.line); } static void @@ -894,7 +894,7 @@ serial_omap_pm(struct uart_port *port, unsigned int state, struct uart_omap_port *up = (struct uart_omap_port *)port; unsigned char efr; - dev_dbg(up->port.dev, "serial_omap_pm+%d\n", up->pdev->id); + dev_dbg(up->port.dev, "serial_omap_pm+%d\n", up->port.line); pm_runtime_get_sync(&up->pdev->dev); serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); @@ -933,7 +933,7 @@ static void serial_omap_config_port(struct uart_port *port, int flags) struct uart_omap_port *up = (struct uart_omap_port *)port; dev_dbg(up->port.dev, "serial_omap_config_port+%d\n", - up->pdev->id); + up->port.line); up->port.type = PORT_OMAP; } @@ -950,7 +950,7 @@ serial_omap_type(struct uart_port *port) { struct uart_omap_port *up = (struct uart_omap_port *)port; - dev_dbg(up->port.dev, "serial_omap_type+%d\n", up->pdev->id); + dev_dbg(up->port.dev, "serial_omap_type+%d\n", up->port.line); return up->name; } @@ -1111,7 +1111,7 @@ static struct console serial_omap_console = { static void serial_omap_add_console_port(struct uart_omap_port *up) { - serial_omap_console_ports[up->pdev->id] = up; + serial_omap_console_ports[up->port.line] = up; } #define OMAP_CONSOLE (&serial_omap_console) @@ -1365,7 +1365,6 @@ static int serial_omap_probe(struct platform_device *pdev) ret = -ENOMEM; goto do_release_region; } - sprintf(up->name, "OMAP UART%d", pdev->id); up->pdev = pdev; up->port.dev = &pdev->dev; up->port.type = PORT_OMAP; @@ -1376,6 +1375,7 @@ static int serial_omap_probe(struct platform_device *pdev) up->port.fifosize = 64; up->port.ops = &serial_omap_pops; up->port.line = pdev->id; + sprintf(up->name, "OMAP UART%d", up->port.line); up->port.mapbase = mem->start; up->port.membase = ioremap(mem->start, resource_size(mem)); @@ -1418,7 +1418,7 @@ static int serial_omap_probe(struct platform_device *pdev) pm_runtime_enable(&pdev->dev); pm_runtime_get_sync(&pdev->dev); - ui[pdev->id] = up; + ui[up->port.line] = up; serial_omap_add_console_port(up); ret = uart_add_one_port(&serial_omap_reg, &up->port); -- cgit v1.2.3 From 8fe789dc375a1929bf64a9b982140cf394c8bce5 Mon Sep 17 00:00:00 2001 From: Rajendra Nayak Date: Wed, 14 Dec 2011 17:25:44 +0530 Subject: omap-serial: Use default clock speed (48Mhz) if not specified Use a default clock speed of 48Mhz, instead of ending up with 0, if platforms fail to specify a valid clock speed. Signed-off-by: Rajendra Nayak Reviewed-by: Rob Herring Signed-off-by: Tony Lindgren --- drivers/tty/serial/omap-serial.c | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'drivers/tty') diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c index 1baf24b96469..c5b545f19a16 100644 --- a/drivers/tty/serial/omap-serial.c +++ b/drivers/tty/serial/omap-serial.c @@ -43,6 +43,8 @@ #include #include +#define DEFAULT_CLK_SPEED 48000000 /* 48Mhz*/ + static struct uart_omap_port *ui[OMAP_MAX_HSUART_PORTS]; /* Forward declaration of functions */ @@ -1387,6 +1389,11 @@ static int serial_omap_probe(struct platform_device *pdev) up->port.flags = omap_up_info->flags; up->port.uartclk = omap_up_info->uartclk; + if (!up->port.uartclk) { + up->port.uartclk = DEFAULT_CLK_SPEED; + dev_warn(&pdev->dev, "No clock speed specified: using default:" + "%d\n", DEFAULT_CLK_SPEED); + } up->uart_dma.uart_base = mem->start; up->errata = omap_up_info->errata; -- cgit v1.2.3 From d92b0dfc5078aeec869d58372dbda5e16739b8de Mon Sep 17 00:00:00 2001 From: Rajendra Nayak Date: Wed, 14 Dec 2011 17:25:45 +0530 Subject: omap-serial: Add minimal device tree support Adapt the driver to device tree and pass minimal platform data from device tree needed for console boot. No power management features will be suppported for now since it requires more tweaks around OCP settings to toggle forceidle/noidle/smartidle bits and handling remote wakeup and dynamic muxing. Signed-off-by: Rajendra Nayak Reviewed-by: Rob Herring Signed-off-by: Tony Lindgren --- .../devicetree/bindings/serial/omap_serial.txt | 10 +++++ drivers/tty/serial/omap-serial.c | 45 ++++++++++++++++++++-- 2 files changed, 52 insertions(+), 3 deletions(-) create mode 100644 Documentation/devicetree/bindings/serial/omap_serial.txt (limited to 'drivers/tty') diff --git a/Documentation/devicetree/bindings/serial/omap_serial.txt b/Documentation/devicetree/bindings/serial/omap_serial.txt new file mode 100644 index 000000000000..342eedd10050 --- /dev/null +++ b/Documentation/devicetree/bindings/serial/omap_serial.txt @@ -0,0 +1,10 @@ +OMAP UART controller + +Required properties: +- compatible : should be "ti,omap2-uart" for OMAP2 controllers +- compatible : should be "ti,omap3-uart" for OMAP3 controllers +- compatible : should be "ti,omap4-uart" for OMAP4 controllers +- ti,hwmods : Must be "uart", n being the instance number (1-based) + +Optional properties: +- clock-frequency : frequency of the clock input to the UART diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c index c5b545f19a16..ca24ab37d11c 100644 --- a/drivers/tty/serial/omap-serial.c +++ b/drivers/tty/serial/omap-serial.c @@ -38,6 +38,7 @@ #include #include #include +#include #include #include @@ -1325,6 +1326,19 @@ static void uart_tx_dma_callback(int lch, u16 ch_status, void *data) return; } +static struct omap_uart_port_info *of_get_uart_port_info(struct device *dev) +{ + struct omap_uart_port_info *omap_up_info; + + omap_up_info = devm_kzalloc(dev, sizeof(*omap_up_info), GFP_KERNEL); + if (!omap_up_info) + return NULL; /* out of memory */ + + of_property_read_u32(dev->of_node, "clock-frequency", + &omap_up_info->uartclk); + return omap_up_info; +} + static int serial_omap_probe(struct platform_device *pdev) { struct uart_omap_port *up; @@ -1332,6 +1346,9 @@ static int serial_omap_probe(struct platform_device *pdev) struct omap_uart_port_info *omap_up_info = pdev->dev.platform_data; int ret = -ENOSPC; + if (pdev->dev.of_node) + omap_up_info = of_get_uart_port_info(&pdev->dev); + mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (!mem) { dev_err(&pdev->dev, "no mem resource?\n"); @@ -1376,9 +1393,20 @@ static int serial_omap_probe(struct platform_device *pdev) up->port.regshift = 2; up->port.fifosize = 64; up->port.ops = &serial_omap_pops; - up->port.line = pdev->id; - sprintf(up->name, "OMAP UART%d", up->port.line); + if (pdev->dev.of_node) + up->port.line = of_alias_get_id(pdev->dev.of_node, "serial"); + else + up->port.line = pdev->id; + + if (up->port.line < 0) { + dev_err(&pdev->dev, "failed to get alias/pdev id, errno %d\n", + up->port.line); + ret = -ENODEV; + goto err; + } + + sprintf(up->name, "OMAP UART%d", up->port.line); up->port.mapbase = mem->start; up->port.membase = ioremap(mem->start, resource_size(mem)); if (!up->port.membase) { @@ -1531,7 +1559,7 @@ static int serial_omap_runtime_suspend(struct device *dev) if (!up) return -EINVAL; - if (!pdata->enable_wakeup) + if (!pdata || !pdata->enable_wakeup) return 0; if (pdata->get_context_loss_count) @@ -1592,12 +1620,23 @@ static const struct dev_pm_ops serial_omap_dev_pm_ops = { serial_omap_runtime_resume, NULL) }; +#if defined(CONFIG_OF) +static const struct of_device_id omap_serial_of_match[] = { + { .compatible = "ti,omap2-uart" }, + { .compatible = "ti,omap3-uart" }, + { .compatible = "ti,omap4-uart" }, + {}, +}; +MODULE_DEVICE_TABLE(of, omap_serial_of_match); +#endif + static struct platform_driver serial_omap_driver = { .probe = serial_omap_probe, .remove = serial_omap_remove, .driver = { .name = DRIVER_NAME, .pm = &serial_omap_dev_pm_ops, + .of_match_table = of_match_ptr(omap_serial_of_match), }, }; -- cgit v1.2.3