From 307c897db762d1e0feee9477276b08f6deca4a5b Mon Sep 17 00:00:00 2001 From: Marc Kleine-Budde Date: Mon, 2 May 2022 19:54:55 +0200 Subject: spi: spi-imx: replace struct spi_imx_data::bitbang by pointer to struct spi_controller There's no need to embed the struct spi_bitbang into our private data (struct spi_imx_data), the spi core is flexible enough, so that we only need a pointer to the allocated struct spi_controller. This is also a preparation patch to add PIO based polling support to the driver. Co-developed-by: David Jander Signed-off-by: David Jander Signed-off-by: Marc Kleine-Budde Link: https://lore.kernel.org/r/20220502175457.1977983-8-mkl@pengutronix.de Signed-off-by: Mark Brown --- drivers/spi/Kconfig | 1 - drivers/spi/spi-imx.c | 58 +++++++++++++++++++++++++-------------------------- 2 files changed, 29 insertions(+), 30 deletions(-) (limited to 'drivers/spi') diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index 9f09aff3cca1..f56fa715d4e7 100644 --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig @@ -414,7 +414,6 @@ config SPI_IMG_SPFI config SPI_IMX tristate "Freescale i.MX SPI controllers" depends on ARCH_MXC || COMPILE_TEST - select SPI_BITBANG help This enables support for the Freescale i.MX SPI controllers. diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c index 9defc55707c7..894801ed182b 100644 --- a/drivers/spi/spi-imx.c +++ b/drivers/spi/spi-imx.c @@ -18,7 +18,6 @@ #include #include #include -#include #include #include #include @@ -86,7 +85,7 @@ struct spi_imx_devtype_data { }; struct spi_imx_data { - struct spi_bitbang bitbang; + struct spi_controller *controller; struct device *dev; struct completion xfer_done; @@ -580,7 +579,7 @@ static int mx51_ecspi_prepare_message(struct spi_imx_data *spi_imx, * the SPI communication as the device on the other end would consider * the change of SCLK polarity as a clock tick already. * - * Because spi_imx->spi_bus_clk is only set in bitbang prepare_message + * Because spi_imx->spi_bus_clk is only set in prepare_message * callback, iterate over all the transfers in spi_message, find the * one with lowest bus frequency, and use that bus frequency for the * delay calculation. In case all transfers have speed_hz == 0, then @@ -1261,7 +1260,7 @@ static int spi_imx_setupxfer(struct spi_device *spi, spi_imx->dynamic_burst = 0; } - if (spi_imx_can_dma(spi_imx->bitbang.master, spi, t)) + if (spi_imx_can_dma(spi_imx->controller, spi, t)) spi_imx->usedma = true; else spi_imx->usedma = false; @@ -1282,7 +1281,7 @@ static int spi_imx_setupxfer(struct spi_device *spi, static void spi_imx_sdma_exit(struct spi_imx_data *spi_imx) { - struct spi_controller *controller = spi_imx->bitbang.master; + struct spi_controller *controller = spi_imx->controller; if (controller->dma_rx) { dma_release_channel(controller->dma_rx); @@ -1324,7 +1323,7 @@ static int spi_imx_sdma_init(struct device *dev, struct spi_imx_data *spi_imx, init_completion(&spi_imx->dma_tx_completion); controller->can_dma = spi_imx_can_dma; controller->max_dma_len = MAX_SDMA_BD_BYTES; - spi_imx->bitbang.master->flags = SPI_CONTROLLER_MUST_RX | + spi_imx->controller->flags = SPI_CONTROLLER_MUST_RX | SPI_CONTROLLER_MUST_TX; return 0; @@ -1367,7 +1366,7 @@ static int spi_imx_dma_transfer(struct spi_imx_data *spi_imx, struct dma_async_tx_descriptor *desc_tx, *desc_rx; unsigned long transfer_timeout; unsigned long timeout; - struct spi_controller *controller = spi_imx->bitbang.master; + struct spi_controller *controller = spi_imx->controller; struct sg_table *tx = &transfer->tx_sg, *rx = &transfer->rx_sg; struct scatterlist *last_sg = sg_last(rx->sgl, rx->nents); unsigned int bytes_per_word, i; @@ -1450,7 +1449,7 @@ static int spi_imx_dma_transfer(struct spi_imx_data *spi_imx, return -ETIMEDOUT; } - return transfer->len; + return 0; /* fallback to pio */ dma_failure_no_start: transfer->error |= SPI_TRANS_FAIL_NO_START; @@ -1486,14 +1485,14 @@ static int spi_imx_pio_transfer(struct spi_device *spi, return -ETIMEDOUT; } - return transfer->len; + return 0; } static int spi_imx_pio_transfer_slave(struct spi_device *spi, struct spi_transfer *transfer) { struct spi_imx_data *spi_imx = spi_controller_get_devdata(spi->controller); - int ret = transfer->len; + int ret = 0; if (is_imx53_ecspi(spi_imx) && transfer->len > MX53_MAX_TRANSFER_BYTES) { @@ -1533,11 +1532,13 @@ static int spi_imx_pio_transfer_slave(struct spi_device *spi, return ret; } -static int spi_imx_transfer(struct spi_device *spi, +static int spi_imx_transfer_one(struct spi_controller *controller, + struct spi_device *spi, struct spi_transfer *transfer) { struct spi_imx_data *spi_imx = spi_controller_get_devdata(spi->controller); + spi_imx_setupxfer(spi, transfer); transfer->effective_speed_hz = spi_imx->spi_bus_clk; /* flush rxfifo before transfer */ @@ -1642,7 +1643,7 @@ static int spi_imx_probe(struct platform_device *pdev) controller->use_gpio_descriptors = true; spi_imx = spi_controller_get_devdata(controller); - spi_imx->bitbang.master = controller; + spi_imx->controller = controller; spi_imx->dev = &pdev->dev; spi_imx->slave_mode = slave_mode; @@ -1659,20 +1660,20 @@ static int spi_imx_probe(struct platform_device *pdev) else controller->num_chipselect = 3; - spi_imx->bitbang.setup_transfer = spi_imx_setupxfer; - spi_imx->bitbang.txrx_bufs = spi_imx_transfer; - spi_imx->bitbang.master->setup = spi_imx_setup; - spi_imx->bitbang.master->cleanup = spi_imx_cleanup; - spi_imx->bitbang.master->prepare_message = spi_imx_prepare_message; - spi_imx->bitbang.master->unprepare_message = spi_imx_unprepare_message; - spi_imx->bitbang.master->slave_abort = spi_imx_slave_abort; - spi_imx->bitbang.master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH | SPI_NO_CS; + spi_imx->controller->transfer_one = spi_imx_transfer_one; + spi_imx->controller->setup = spi_imx_setup; + spi_imx->controller->cleanup = spi_imx_cleanup; + spi_imx->controller->prepare_message = spi_imx_prepare_message; + spi_imx->controller->unprepare_message = spi_imx_unprepare_message; + spi_imx->controller->slave_abort = spi_imx_slave_abort; + spi_imx->controller->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH | SPI_NO_CS; + if (is_imx35_cspi(spi_imx) || is_imx51_ecspi(spi_imx) || is_imx53_ecspi(spi_imx)) - spi_imx->bitbang.master->mode_bits |= SPI_LOOP | SPI_READY; + spi_imx->controller->mode_bits |= SPI_LOOP | SPI_READY; if (is_imx51_ecspi(spi_imx) || is_imx53_ecspi(spi_imx)) - spi_imx->bitbang.master->mode_bits |= SPI_RX_CPHA_FLIP; + spi_imx->controller->mode_bits |= SPI_RX_CPHA_FLIP; if (is_imx51_ecspi(spi_imx) && device_property_read_u32(&pdev->dev, "cs-gpios", NULL)) @@ -1681,7 +1682,7 @@ static int spi_imx_probe(struct platform_device *pdev) * setting the burst length to the word size. This is * considerably faster than manually controlling the CS. */ - spi_imx->bitbang.master->mode_bits |= SPI_CS_WORD; + spi_imx->controller->mode_bits |= SPI_CS_WORD; spi_imx->spi_drctl = spi_drctl; @@ -1754,10 +1755,10 @@ static int spi_imx_probe(struct platform_device *pdev) spi_imx->devtype_data->intctrl(spi_imx, 0); controller->dev.of_node = pdev->dev.of_node; - ret = spi_bitbang_start(&spi_imx->bitbang); + ret = spi_register_controller(controller); if (ret) { - dev_err_probe(&pdev->dev, ret, "bitbang start failed\n"); - goto out_bitbang_start; + dev_err_probe(&pdev->dev, ret, "register controller failed\n"); + goto out_register_controller; } pm_runtime_mark_last_busy(spi_imx->dev); @@ -1765,7 +1766,7 @@ static int spi_imx_probe(struct platform_device *pdev) return ret; -out_bitbang_start: +out_register_controller: if (spi_imx->devtype_data->has_dmamode) spi_imx_sdma_exit(spi_imx); out_runtime_pm_put: @@ -1788,7 +1789,7 @@ static int spi_imx_remove(struct platform_device *pdev) struct spi_imx_data *spi_imx = spi_controller_get_devdata(controller); int ret; - spi_bitbang_stop(&spi_imx->bitbang); + spi_unregister_controller(controller); ret = pm_runtime_resume_and_get(spi_imx->dev); if (ret < 0) { @@ -1803,7 +1804,6 @@ static int spi_imx_remove(struct platform_device *pdev) pm_runtime_disable(spi_imx->dev); spi_imx_sdma_exit(spi_imx); - spi_controller_put(controller); return 0; } -- cgit v1.2.3