From 86f7fa71cd830d18d7ebcaf719dffd5ddfe1acdd Mon Sep 17 00:00:00 2001 From: Uwe Kleine-König Date: Thu, 17 Jun 2021 11:51:41 +0200 Subject: pwm: tegra: Don't modify HW state in .remove callback MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit A consumer is expected to disable a PWM before calling pwm_put(). And if they didn't there is hopefully a good reason (or the consumer needs fixing). Also if disabling an enabled PWM was the right thing to do, this should better be done in the framework instead of in each low level driver. So drop the hardware modification from the .remove() callback. Signed-off-by: Uwe Kleine-König Signed-off-by: Thierry Reding --- drivers/pwm/pwm-tegra.c | 13 ------------- 1 file changed, 13 deletions(-) (limited to 'drivers/pwm/pwm-tegra.c') diff --git a/drivers/pwm/pwm-tegra.c b/drivers/pwm/pwm-tegra.c index fa025795198b..a051cf43e7d7 100644 --- a/drivers/pwm/pwm-tegra.c +++ b/drivers/pwm/pwm-tegra.c @@ -300,25 +300,12 @@ static int tegra_pwm_probe(struct platform_device *pdev) static int tegra_pwm_remove(struct platform_device *pdev) { struct tegra_pwm_chip *pc = platform_get_drvdata(pdev); - unsigned int i; int err; err = clk_prepare_enable(pc->clk); if (err < 0) return err; - for (i = 0; i < pc->chip.npwm; i++) { - struct pwm_device *pwm = &pc->chip.pwms[i]; - - if (!pwm_is_enabled(pwm)) - if (clk_prepare_enable(pc->clk) < 0) - continue; - - pwm_writel(pc, i, 0); - - clk_disable_unprepare(pc->clk); - } - reset_control_assert(pc->rst); clk_disable_unprepare(pc->clk); -- cgit v1.2.3