From 5af67635c36ed92ef172c7bbf4d711364bc3bdf7 Mon Sep 17 00:00:00 2001 From: Matt Pelland Date: Thu, 1 Aug 2019 15:50:59 -0400 Subject: phy: marvell: phy-mvebu-cp110-comphy: rename instances of DLT The documentation for Marvell's cp110 phy refers to these registers/register regions as DTL control, DTL frequency loop enable, etc. This patch aligns the relevant code for these accordingly. Signed-off-by: Matt Pelland Signed-off-by: Kishon Vijay Abraham I --- drivers/phy/marvell/phy-mvebu-cp110-comphy.c | 22 +++++++++++----------- 1 file changed, 11 insertions(+), 11 deletions(-) (limited to 'drivers/phy/marvell/phy-mvebu-cp110-comphy.c') diff --git a/drivers/phy/marvell/phy-mvebu-cp110-comphy.c b/drivers/phy/marvell/phy-mvebu-cp110-comphy.c index 091b2f3e5005..e3b87c94aaf6 100644 --- a/drivers/phy/marvell/phy-mvebu-cp110-comphy.c +++ b/drivers/phy/marvell/phy-mvebu-cp110-comphy.c @@ -80,8 +80,8 @@ #define MVEBU_COMPHY_TX_SLEW_RATE(n) (0x974 + (n) * 0x1000) #define MVEBU_COMPHY_TX_SLEW_RATE_EMPH(n) ((n) << 5) #define MVEBU_COMPHY_TX_SLEW_RATE_SLC(n) ((n) << 10) -#define MVEBU_COMPHY_DLT_CTRL(n) (0x984 + (n) * 0x1000) -#define MVEBU_COMPHY_DLT_CTRL_DTL_FLOOP_EN BIT(2) +#define MVEBU_COMPHY_DTL_CTRL(n) (0x984 + (n) * 0x1000) +#define MVEBU_COMPHY_DTL_CTRL_DTL_FLOOP_EN BIT(2) #define MVEBU_COMPHY_FRAME_DETECT0(n) (0xa14 + (n) * 0x1000) #define MVEBU_COMPHY_FRAME_DETECT0_PATN(n) ((n) << 7) #define MVEBU_COMPHY_FRAME_DETECT3(n) (0xa20 + (n) * 0x1000) @@ -494,9 +494,9 @@ static int mvebu_comphy_set_mode_sgmii(struct phy *phy) val |= MVEBU_COMPHY_RX_CTRL1_RXCLK2X_SEL; writel(val, priv->base + MVEBU_COMPHY_RX_CTRL1(lane->id)); - val = readl(priv->base + MVEBU_COMPHY_DLT_CTRL(lane->id)); - val &= ~MVEBU_COMPHY_DLT_CTRL_DTL_FLOOP_EN; - writel(val, priv->base + MVEBU_COMPHY_DLT_CTRL(lane->id)); + val = readl(priv->base + MVEBU_COMPHY_DTL_CTRL(lane->id)); + val &= ~MVEBU_COMPHY_DTL_CTRL_DTL_FLOOP_EN; + writel(val, priv->base + MVEBU_COMPHY_DTL_CTRL(lane->id)); regmap_read(priv->regmap, MVEBU_COMPHY_CONF1(lane->id), &val); val &= ~MVEBU_COMPHY_CONF1_USB_PCIE; @@ -527,9 +527,9 @@ static int mvebu_comphy_set_mode_rxaui(struct phy *phy) MVEBU_COMPHY_RX_CTRL1_CLK8T_EN; writel(val, priv->base + MVEBU_COMPHY_RX_CTRL1(lane->id)); - val = readl(priv->base + MVEBU_COMPHY_DLT_CTRL(lane->id)); - val |= MVEBU_COMPHY_DLT_CTRL_DLT_FLOOP_EN; - writel(val, priv->base + MVEBU_COMPHY_DLT_CTRL(lane->id)); + val = readl(priv->base + MVEBU_COMPHY_DTL_CTRL(lane->id)); + val |= MVEBU_COMPHY_DTL_CTRL_DTL_FLOOP_EN; + writel(val, priv->base + MVEBU_COMPHY_DTL_CTRL(lane->id)); val = readl(priv->base + MVEBU_COMPHY_SERDES_CFG2(lane->id)); val |= MVEBU_COMPHY_SERDES_CFG2_DFE_EN; @@ -580,9 +580,9 @@ static int mvebu_comphy_set_mode_10gkr(struct phy *phy) MVEBU_COMPHY_RX_CTRL1_CLK8T_EN; writel(val, priv->base + MVEBU_COMPHY_RX_CTRL1(lane->id)); - val = readl(priv->base + MVEBU_COMPHY_DLT_CTRL(lane->id)); - val |= MVEBU_COMPHY_DLT_CTRL_DTL_FLOOP_EN; - writel(val, priv->base + MVEBU_COMPHY_DLT_CTRL(lane->id)); + val = readl(priv->base + MVEBU_COMPHY_DTL_CTRL(lane->id)); + val |= MVEBU_COMPHY_DTL_CTRL_DTL_FLOOP_EN; + writel(val, priv->base + MVEBU_COMPHY_DTL_CTRL(lane->id)); /* Speed divider */ val = readl(priv->base + MVEBU_COMPHY_SPEED_DIV(lane->id)); -- cgit v1.2.3