From 1bf83e558cb29d163f4bc6decbc3800ecf4db195 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Tue, 13 Jan 2009 14:38:34 +0100 Subject: PCI: PCIe portdrv: Use driver data to simplify code PCI Express port driver extension, as defined by struct pcie_port_device_ext in portdrv.h, is allocated and initialized, but never used (it also is never freed). Extend it to hold the PCI Express port type as well as the port interrupt mode, change its name and use it to simplify the code in portdrv_core.c . Additionally, remove the redundant interrupt_mode member of struct pcie_device defined in include/linux/pcieport_if.h . Signed-off-by: Rafael J. Wysocki Signed-off-by: Jesse Barnes --- drivers/pci/pcie/portdrv.h | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers/pci/pcie/portdrv.h') diff --git a/drivers/pci/pcie/portdrv.h b/drivers/pci/pcie/portdrv.h index 2529f3f2ea5a..b0dcbc73415e 100644 --- a/drivers/pci/pcie/portdrv.h +++ b/drivers/pci/pcie/portdrv.h @@ -28,8 +28,9 @@ #define get_descriptor_id(type, service) (((type - 4) << 4) | service) -struct pcie_port_device_ext { - int interrupt_mode; /* [0:INTx | 1:MSI | 2:MSI-X] */ +struct pcie_port_data { + int port_type; /* Type of the port */ + int port_irq_mode; /* [0:INTx | 1:MSI | 2:MSI-X] */ }; extern struct bus_type pcie_port_bus_type; -- cgit v1.2.3 From 22106368c999246c414610dcaacd485e741605b1 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Tue, 13 Jan 2009 14:46:46 +0100 Subject: PCI: PCIe portdrv: Remove struct pcie_port_service_id The PCI Express port driver uses 'struct pcie_port_service_id' for matching port service devices and drivers, but this structure contains fields that duplicate information from the port device itself (vendor, device, subvendor, subdevice) and fields that are not used by any existing port service driver (class, class_mask, drvier_data). Also, both existing port service drivers (AER and PCIe HP) don't even use the vendor and device fields for device matching. Therefore 'struct pcie_port_service_id' can be removed altogether and the only useful members of it (port_type, service) can be introduced directly into the port service device and port service driver structures. That simplifies the code quite a bit and reduces its size. Signed-off-by: Rafael J. Wysocki Signed-off-by: Jesse Barnes --- drivers/pci/hotplug/pciehp_acpi.c | 13 ++----------- drivers/pci/hotplug/pciehp_core.c | 12 ++---------- drivers/pci/pcie/aer/aerdrv.c | 16 ++-------------- drivers/pci/pcie/aer/aerdrv_core.c | 10 +++++----- drivers/pci/pcie/portdrv.h | 5 ----- drivers/pci/pcie/portdrv_bus.c | 18 ++++++++++-------- drivers/pci/pcie/portdrv_core.c | 5 +---- include/linux/pcieport_if.h | 17 ++++++++--------- 8 files changed, 30 insertions(+), 66 deletions(-) (limited to 'drivers/pci/pcie/portdrv.h') diff --git a/drivers/pci/hotplug/pciehp_acpi.c b/drivers/pci/hotplug/pciehp_acpi.c index ad8835758a17..21734c311529 100644 --- a/drivers/pci/hotplug/pciehp_acpi.c +++ b/drivers/pci/hotplug/pciehp_acpi.c @@ -67,16 +67,6 @@ static int __init parse_detect_mode(void) return PCIEHP_DETECT_DEFAULT; } -static struct pcie_port_service_id __initdata port_pci_ids[] = { - { - .vendor = PCI_ANY_ID, - .device = PCI_ANY_ID, - .port_type = PCIE_ANY_PORT, - .service_type = PCIE_PORT_SERVICE_HP, - .driver_data = 0, - }, { /* end: all zeroes */ } -}; - static int __initdata dup_slot_id; static int __initdata acpi_slot_detected; static struct list_head __initdata dummy_slots = LIST_HEAD_INIT(dummy_slots); @@ -110,7 +100,8 @@ static int __init dummy_probe(struct pcie_device *dev) static struct pcie_port_service_driver __initdata dummy_driver = { .name = "pciehp_dummy", - .id_table = port_pci_ids, + .port_type = PCIE_ANY_PORT, + .service = PCIE_PORT_SERVICE_HP, .probe = dummy_probe, }; diff --git a/drivers/pci/hotplug/pciehp_core.c b/drivers/pci/hotplug/pciehp_core.c index 3429b21dbb53..3d21bbba3308 100644 --- a/drivers/pci/hotplug/pciehp_core.c +++ b/drivers/pci/hotplug/pciehp_core.c @@ -505,18 +505,10 @@ static int pciehp_resume (struct pcie_device *dev) } #endif -static struct pcie_port_service_id port_pci_ids[] = { { - .vendor = PCI_ANY_ID, - .device = PCI_ANY_ID, - .port_type = PCIE_ANY_PORT, - .service_type = PCIE_PORT_SERVICE_HP, - .driver_data = 0, - }, { /* end: all zeroes */ } -}; - static struct pcie_port_service_driver hpdriver_portdrv = { .name = PCIE_MODULE_NAME, - .id_table = &port_pci_ids[0], + .port_type = PCIE_ANY_PORT, + .service = PCIE_PORT_SERVICE_HP, .probe = pciehp_probe, .remove = pciehp_remove, diff --git a/drivers/pci/pcie/aer/aerdrv.c b/drivers/pci/pcie/aer/aerdrv.c index 57c41204c549..e11c03194063 100644 --- a/drivers/pci/pcie/aer/aerdrv.c +++ b/drivers/pci/pcie/aer/aerdrv.c @@ -48,19 +48,6 @@ static pci_ers_result_t aer_error_detected(struct pci_dev *dev, static void aer_error_resume(struct pci_dev *dev); static pci_ers_result_t aer_root_reset(struct pci_dev *dev); -/* - * PCI Express bus's AER Root service driver data structure - */ -static struct pcie_port_service_id aer_id[] = { - { - .vendor = PCI_ANY_ID, - .device = PCI_ANY_ID, - .port_type = PCIE_RC_PORT, - .service_type = PCIE_PORT_SERVICE_AER, - }, - { /* end: all zeroes */ } -}; - static struct pci_error_handlers aer_error_handlers = { .error_detected = aer_error_detected, .resume = aer_error_resume, @@ -68,7 +55,8 @@ static struct pci_error_handlers aer_error_handlers = { static struct pcie_port_service_driver aerdriver = { .name = "aer", - .id_table = &aer_id[0], + .port_type = PCIE_ANY_PORT, + .service = PCIE_PORT_SERVICE_AER, .probe = aer_probe, .remove = aer_remove, diff --git a/drivers/pci/pcie/aer/aerdrv_core.c b/drivers/pci/pcie/aer/aerdrv_core.c index 382575007382..307452f30035 100644 --- a/drivers/pci/pcie/aer/aerdrv_core.c +++ b/drivers/pci/pcie/aer/aerdrv_core.c @@ -351,21 +351,21 @@ static int find_aer_service_iter(struct device *device, void *data) { struct device_driver *driver; struct pcie_port_service_driver *service_driver; - struct pcie_device *pcie_dev; struct find_aer_service_data *result; result = (struct find_aer_service_data *) data; if (device->bus == &pcie_port_bus_type) { - pcie_dev = to_pcie_device(device); - if (pcie_dev->id.port_type == PCIE_SW_DOWNSTREAM_PORT) + struct pcie_port_data *port_data; + + port_data = pci_get_drvdata(to_pcie_device(device)->port); + if (port_data->port_type == PCIE_SW_DOWNSTREAM_PORT) result->is_downstream = 1; driver = device->driver; if (driver) { service_driver = to_service_driver(driver); - if (service_driver->id_table->service_type == - PCIE_PORT_SERVICE_AER) { + if (service_driver->service == PCIE_PORT_SERVICE_AER) { result->aer_driver = service_driver; return 1; } diff --git a/drivers/pci/pcie/portdrv.h b/drivers/pci/pcie/portdrv.h index b0dcbc73415e..ad4d082a0344 100644 --- a/drivers/pci/pcie/portdrv.h +++ b/drivers/pci/pcie/portdrv.h @@ -28,11 +28,6 @@ #define get_descriptor_id(type, service) (((type - 4) << 4) | service) -struct pcie_port_data { - int port_type; /* Type of the port */ - int port_irq_mode; /* [0:INTx | 1:MSI | 2:MSI-X] */ -}; - extern struct bus_type pcie_port_bus_type; extern int pcie_port_device_probe(struct pci_dev *dev); extern int pcie_port_device_register(struct pci_dev *dev); diff --git a/drivers/pci/pcie/portdrv_bus.c b/drivers/pci/pcie/portdrv_bus.c index eec89b767f9f..ef3a4eeaebb4 100644 --- a/drivers/pci/pcie/portdrv_bus.c +++ b/drivers/pci/pcie/portdrv_bus.c @@ -26,20 +26,22 @@ EXPORT_SYMBOL_GPL(pcie_port_bus_type); static int pcie_port_bus_match(struct device *dev, struct device_driver *drv) { struct pcie_device *pciedev; + struct pcie_port_data *port_data; struct pcie_port_service_driver *driver; if (drv->bus != &pcie_port_bus_type || dev->bus != &pcie_port_bus_type) return 0; - + pciedev = to_pcie_device(dev); driver = to_service_driver(drv); - if ( (driver->id_table->vendor != PCI_ANY_ID && - driver->id_table->vendor != pciedev->id.vendor) || - (driver->id_table->device != PCI_ANY_ID && - driver->id_table->device != pciedev->id.device) || - (driver->id_table->port_type != PCIE_ANY_PORT && - driver->id_table->port_type != pciedev->id.port_type) || - driver->id_table->service_type != pciedev->id.service_type ) + + if (driver->service != pciedev->service) + return 0; + + port_data = pci_get_drvdata(pciedev->port); + + if (driver->port_type != PCIE_ANY_PORT + && driver->port_type != port_data->port_type) return 0; return 1; diff --git a/drivers/pci/pcie/portdrv_core.c b/drivers/pci/pcie/portdrv_core.c index 682524b0c93a..843d9e30dd3b 100644 --- a/drivers/pci/pcie/portdrv_core.c +++ b/drivers/pci/pcie/portdrv_core.c @@ -140,10 +140,7 @@ static void pcie_device_init(struct pci_dev *parent, struct pcie_device *dev, dev->port = parent; dev->irq = irq; - dev->id.vendor = parent->vendor; - dev->id.device = parent->device; - dev->id.port_type = port_type; - dev->id.service_type = service_type; + dev->service = service_type; /* Initialize generic device interface */ device = &dev->device; diff --git a/include/linux/pcieport_if.h b/include/linux/pcieport_if.h index 59e90b8a7839..a3832079508e 100644 --- a/include/linux/pcieport_if.h +++ b/include/linux/pcieport_if.h @@ -27,18 +27,15 @@ #define PCIE_PORT_MSI_MODE 1 #define PCIE_PORT_MSIX_MODE 2 -struct pcie_port_service_id { - __u32 vendor, device; /* Vendor and device ID or PCI_ANY_ID*/ - __u32 subvendor, subdevice; /* Subsystem ID's or PCI_ANY_ID */ - __u32 class, class_mask; /* (class,subclass,prog-if) triplet */ - __u32 port_type, service_type; /* Port Entity */ - kernel_ulong_t driver_data; +struct pcie_port_data { + int port_type; /* Type of the port */ + int port_irq_mode; /* [0:INTx | 1:MSI | 2:MSI-X] */ }; struct pcie_device { int irq; /* Service IRQ/MSI/MSI-X Vector */ - struct pcie_port_service_id id; /* Service ID */ - struct pci_dev *port; /* Root/Upstream/Downstream Port */ + struct pci_dev *port; /* Root/Upstream/Downstream Port */ + u32 service; /* Port service this device represents */ void *priv_data; /* Service Private Data */ struct device device; /* Generic Device Interface */ }; @@ -67,7 +64,9 @@ struct pcie_port_service_driver { /* Link Reset Capability - AER service driver specific */ pci_ers_result_t (*reset_link) (struct pci_dev *dev); - const struct pcie_port_service_id *id_table; + int port_type; /* Type of the port this driver can handle */ + u32 service; /* Port service this device represents */ + struct device_driver driver; }; #define to_service_driver(d) \ -- cgit v1.2.3 From b43d451385ef833e0696032aac2629da04d46c59 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Sat, 24 Jan 2009 00:23:22 +0100 Subject: PCI/PCIe portdrv: Fix allocation of interrupts If MSI-X interrupt mode is used by the PCI Express port driver, too many vectors are allocated and it is not ensured that the right vectors will be used for the right services. Namely, the PCI Express specification states that both PCI Express native PME and PCI Express hotplug will always use the same MSI or MSI-X message for signalling interrupts, which implies that the same vector will be used by both of them. Also, the VC service does not use interrupts at all. Moreover, is not clear which of the vectors allocated by pci_enable_msix() in the current code will be used for PME and hotplug and which of them will be used for AER if all of these services are configured. For these reasons, rework the allocation of interrupts for PCI Express ports so that if MSI-X are enabled, the right vectors will be used for the right purposes. Signed-off-by: Rafael J. Wysocki Reviewed-by: Hidetoshi Seto Signed-off-by: Jesse Barnes --- drivers/pci/pcie/portdrv.h | 6 ++ drivers/pci/pcie/portdrv_core.c | 206 ++++++++++++++++++++++++++++++++-------- include/linux/pcieport_if.h | 12 ++- 3 files changed, 181 insertions(+), 43 deletions(-) (limited to 'drivers/pci/pcie/portdrv.h') diff --git a/drivers/pci/pcie/portdrv.h b/drivers/pci/pcie/portdrv.h index ad4d082a0344..5b818bd835ef 100644 --- a/drivers/pci/pcie/portdrv.h +++ b/drivers/pci/pcie/portdrv.h @@ -25,6 +25,12 @@ #define PCIE_CAPABILITIES_REG 0x2 #define PCIE_SLOT_CAPABILITIES_REG 0x14 #define PCIE_PORT_DEVICE_MAXSERVICES 4 +#define PCIE_PORT_MSI_VECTOR_MASK 0x1f +/* + * According to the PCI Express Base Specification 2.0, the indices of the MSI-X + * table entires used by port services must not exceed 31 + */ +#define PCIE_PORT_MAX_MSIX_ENTRIES 32 #define get_descriptor_id(type, service) (((type - 4) << 4) | service) diff --git a/drivers/pci/pcie/portdrv_core.c b/drivers/pci/pcie/portdrv_core.c index 843d9e30dd3b..3aea92a92928 100644 --- a/drivers/pci/pcie/portdrv_core.c +++ b/drivers/pci/pcie/portdrv_core.c @@ -30,6 +30,152 @@ static void release_pcie_device(struct device *dev) kfree(to_pcie_device(dev)); } +/** + * pcie_port_msix_add_entry - add entry to given array of MSI-X entries + * @entries: Array of MSI-X entries + * @new_entry: Index of the entry to add to the array + * @nr_entries: Number of entries aleady in the array + * + * Return value: Position of the added entry in the array + */ +static int pcie_port_msix_add_entry( + struct msix_entry *entries, int new_entry, int nr_entries) +{ + int j; + + for (j = 0; j < nr_entries; j++) + if (entries[j].entry == new_entry) + return j; + + entries[j].entry = new_entry; + return j; +} + +/** + * pcie_port_enable_msix - try to set up MSI-X as interrupt mode for given port + * @dev: PCI Express port to handle + * @vectors: Array of interrupt vectors to populate + * @mask: Bitmask of port capabilities returned by get_port_device_capability() + * + * Return value: 0 on success, error code on failure + */ +static int pcie_port_enable_msix(struct pci_dev *dev, int *vectors, int mask) +{ + struct msix_entry *msix_entries; + int idx[PCIE_PORT_DEVICE_MAXSERVICES]; + int nr_entries, status, pos, i, nvec; + u16 reg16; + u32 reg32; + + nr_entries = pci_msix_table_size(dev); + if (!nr_entries) + return -EINVAL; + if (nr_entries > PCIE_PORT_MAX_MSIX_ENTRIES) + nr_entries = PCIE_PORT_MAX_MSIX_ENTRIES; + + msix_entries = kzalloc(sizeof(*msix_entries) * nr_entries, GFP_KERNEL); + if (!msix_entries) + return -ENOMEM; + + /* + * Allocate as many entries as the port wants, so that we can check + * which of them will be useful. Moreover, if nr_entries is correctly + * equal to the number of entries this port actually uses, we'll happily + * go through without any tricks. + */ + for (i = 0; i < nr_entries; i++) + msix_entries[i].entry = i; + + status = pci_enable_msix(dev, msix_entries, nr_entries); + if (status) + goto Exit; + + for (i = 0; i < PCIE_PORT_DEVICE_MAXSERVICES; i++) + idx[i] = -1; + status = -EIO; + nvec = 0; + + if (mask & (PCIE_PORT_SERVICE_PME | PCIE_PORT_SERVICE_HP)) { + int entry; + + /* + * The code below follows the PCI Express Base Specification 2.0 + * stating in Section 6.1.6 that "PME and Hot-Plug Event + * interrupts (when both are implemented) always share the same + * MSI or MSI-X vector, as indicated by the Interrupt Message + * Number field in the PCI Express Capabilities register", where + * according to Section 7.8.2 of the specification "For MSI-X, + * the value in this field indicates which MSI-X Table entry is + * used to generate the interrupt message." + */ + pos = pci_find_capability(dev, PCI_CAP_ID_EXP); + pci_read_config_word(dev, pos + PCIE_CAPABILITIES_REG, ®16); + entry = (reg16 >> 9) & PCIE_PORT_MSI_VECTOR_MASK; + if (entry >= nr_entries) + goto Error; + + i = pcie_port_msix_add_entry(msix_entries, entry, nvec); + if (i == nvec) + nvec++; + + idx[PCIE_PORT_SERVICE_PME_SHIFT] = i; + idx[PCIE_PORT_SERVICE_HP_SHIFT] = i; + } + + if (mask & PCIE_PORT_SERVICE_AER) { + int entry; + + /* + * The code below follows Section 7.10.10 of the PCI Express + * Base Specification 2.0 stating that bits 31-27 of the Root + * Error Status Register contain a value indicating which of the + * MSI/MSI-X vectors assigned to the port is going to be used + * for AER, where "For MSI-X, the value in this register + * indicates which MSI-X Table entry is used to generate the + * interrupt message." + */ + pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ERR); + pci_read_config_dword(dev, pos + PCI_ERR_ROOT_STATUS, ®32); + entry = reg32 >> 27; + if (entry >= nr_entries) + goto Error; + + i = pcie_port_msix_add_entry(msix_entries, entry, nvec); + if (i == nvec) + nvec++; + + idx[PCIE_PORT_SERVICE_AER_SHIFT] = i; + } + + /* + * If nvec is equal to the allocated number of entries, we can just use + * what we have. Otherwise, the port has some extra entries not for the + * services we know and we need to work around that. + */ + if (nvec == nr_entries) { + status = 0; + } else { + /* Drop the temporary MSI-X setup */ + pci_disable_msix(dev); + + /* Now allocate the MSI-X vectors for real */ + status = pci_enable_msix(dev, msix_entries, nvec); + if (status) + goto Exit; + } + + for (i = 0; i < PCIE_PORT_DEVICE_MAXSERVICES; i++) + vectors[i] = idx[i] >= 0 ? msix_entries[idx[i]].vector : -1; + + Exit: + kfree(msix_entries); + return status; + + Error: + pci_disable_msix(dev); + goto Exit; +} + /** * assign_interrupt_mode - choose interrupt mode for PCI Express port services * (INTx, MSI-X, MSI) and set up vectors @@ -42,49 +188,31 @@ static void release_pcie_device(struct device *dev) static int assign_interrupt_mode(struct pci_dev *dev, int *vectors, int mask) { struct pcie_port_data *port_data = pci_get_drvdata(dev); - int i, pos, nvec, status = -EINVAL; - int interrupt_mode = PCIE_PORT_NO_IRQ; - - /* Set INTx as default */ - for (i = 0, nvec = 0; i < PCIE_PORT_DEVICE_MAXSERVICES; i++) { - if (mask & (1 << i)) - nvec++; - vectors[i] = dev->irq; - } - if (dev->pin) - interrupt_mode = PCIE_PORT_INTx_MODE; + int irq, interrupt_mode = PCIE_PORT_NO_IRQ; + int i; /* Check MSI quirk */ if (port_data->port_type == PCIE_RC_PORT && pcie_mch_quirk) - return interrupt_mode; + goto Fallback; + + /* Try to use MSI-X if supported */ + if (!pcie_port_enable_msix(dev, vectors, mask)) + return PCIE_PORT_MSIX_MODE; + + /* We're not going to use MSI-X, so try MSI and fall back to INTx */ + if (!pci_enable_msi(dev)) + interrupt_mode = PCIE_PORT_MSI_MODE; + + Fallback: + if (interrupt_mode == PCIE_PORT_NO_IRQ && dev->pin) + interrupt_mode = PCIE_PORT_INTx_MODE; + + irq = interrupt_mode != PCIE_PORT_NO_IRQ ? dev->irq : -1; + for (i = 0; i < PCIE_PORT_DEVICE_MAXSERVICES; i++) + vectors[i] = irq; + + vectors[PCIE_PORT_SERVICE_VC_SHIFT] = -1; - /* Select MSI-X over MSI if supported */ - pos = pci_find_capability(dev, PCI_CAP_ID_MSIX); - if (pos) { - struct msix_entry msix_entries[PCIE_PORT_DEVICE_MAXSERVICES] = - {{0, 0}, {0, 1}, {0, 2}, {0, 3}}; - status = pci_enable_msix(dev, msix_entries, nvec); - if (!status) { - int j = 0; - - interrupt_mode = PCIE_PORT_MSIX_MODE; - for (i = 0; i < PCIE_PORT_DEVICE_MAXSERVICES; i++) { - if (mask & (1 << i)) - vectors[i] = msix_entries[j++].vector; - } - } - } - if (status) { - pos = pci_find_capability(dev, PCI_CAP_ID_MSI); - if (pos) { - status = pci_enable_msi(dev); - if (!status) { - interrupt_mode = PCIE_PORT_MSI_MODE; - for (i = 0;i < PCIE_PORT_DEVICE_MAXSERVICES;i++) - vectors[i] = dev->irq; - } - } - } return interrupt_mode; } diff --git a/include/linux/pcieport_if.h b/include/linux/pcieport_if.h index a3832079508e..5d2afcfa6bc1 100644 --- a/include/linux/pcieport_if.h +++ b/include/linux/pcieport_if.h @@ -16,10 +16,14 @@ #define PCIE_ANY_PORT 7 /* Service Type */ -#define PCIE_PORT_SERVICE_PME 1 /* Power Management Event */ -#define PCIE_PORT_SERVICE_AER 2 /* Advanced Error Reporting */ -#define PCIE_PORT_SERVICE_HP 4 /* Native Hotplug */ -#define PCIE_PORT_SERVICE_VC 8 /* Virtual Channel */ +#define PCIE_PORT_SERVICE_PME_SHIFT 0 /* Power Management Event */ +#define PCIE_PORT_SERVICE_PME (1 << PCIE_PORT_SERVICE_PME_SHIFT) +#define PCIE_PORT_SERVICE_AER_SHIFT 1 /* Advanced Error Reporting */ +#define PCIE_PORT_SERVICE_AER (1 << PCIE_PORT_SERVICE_AER_SHIFT) +#define PCIE_PORT_SERVICE_HP_SHIFT 2 /* Native Hotplug */ +#define PCIE_PORT_SERVICE_HP (1 << PCIE_PORT_SERVICE_HP_SHIFT) +#define PCIE_PORT_SERVICE_VC_SHIFT 3 /* Virtual Channel */ +#define PCIE_PORT_SERVICE_VC (1 << PCIE_PORT_SERVICE_VC_SHIFT) /* Root/Upstream/Downstream Port's Interrupt Mode */ #define PCIE_PORT_NO_IRQ (-1) -- cgit v1.2.3 From 3a3c244c9a355105bc193fde873c73727bf87192 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Sun, 15 Feb 2009 22:32:48 +0100 Subject: PCI: PCIe portdrv: Implement pm object Implement pm object for the PCI Express port driver in order to use the new power management framework and reduce the code size. Signed-off-by: Rafael J. Wysocki Signed-off-by: Jesse Barnes --- drivers/pci/hotplug/pciehp_core.c | 4 ++-- drivers/pci/pcie/aer/aerdrv.c | 6 ------ drivers/pci/pcie/portdrv.h | 4 ++-- drivers/pci/pcie/portdrv_core.c | 14 ++++++-------- drivers/pci/pcie/portdrv_pci.c | 31 +++++++++++++++---------------- include/linux/pcieport_if.h | 2 +- 6 files changed, 26 insertions(+), 35 deletions(-) (limited to 'drivers/pci/pcie/portdrv.h') diff --git a/drivers/pci/hotplug/pciehp_core.c b/drivers/pci/hotplug/pciehp_core.c index 3d21bbba3308..fb254b2454de 100644 --- a/drivers/pci/hotplug/pciehp_core.c +++ b/drivers/pci/hotplug/pciehp_core.c @@ -475,7 +475,7 @@ static void pciehp_remove (struct pcie_device *dev) } #ifdef CONFIG_PM -static int pciehp_suspend (struct pcie_device *dev, pm_message_t state) +static int pciehp_suspend (struct pcie_device *dev) { dev_info(&dev->device, "%s ENTRY\n", __func__); return 0; @@ -503,7 +503,7 @@ static int pciehp_resume (struct pcie_device *dev) } return 0; } -#endif +#endif /* PM */ static struct pcie_port_service_driver hpdriver_portdrv = { .name = PCIE_MODULE_NAME, diff --git a/drivers/pci/pcie/aer/aerdrv.c b/drivers/pci/pcie/aer/aerdrv.c index e11c03194063..32ade5af927e 100644 --- a/drivers/pci/pcie/aer/aerdrv.c +++ b/drivers/pci/pcie/aer/aerdrv.c @@ -40,9 +40,6 @@ MODULE_LICENSE("GPL"); static int __devinit aer_probe (struct pcie_device *dev); static void aer_remove(struct pcie_device *dev); -static int aer_suspend(struct pcie_device *dev, pm_message_t state) -{return 0;} -static int aer_resume(struct pcie_device *dev) {return 0;} static pci_ers_result_t aer_error_detected(struct pci_dev *dev, enum pci_channel_state error); static void aer_error_resume(struct pci_dev *dev); @@ -61,9 +58,6 @@ static struct pcie_port_service_driver aerdriver = { .probe = aer_probe, .remove = aer_remove, - .suspend = aer_suspend, - .resume = aer_resume, - .err_handler = &aer_error_handlers, .reset_link = aer_root_reset, diff --git a/drivers/pci/pcie/portdrv.h b/drivers/pci/pcie/portdrv.h index 5b818bd835ef..17ad53868f9f 100644 --- a/drivers/pci/pcie/portdrv.h +++ b/drivers/pci/pcie/portdrv.h @@ -38,8 +38,8 @@ extern struct bus_type pcie_port_bus_type; extern int pcie_port_device_probe(struct pci_dev *dev); extern int pcie_port_device_register(struct pci_dev *dev); #ifdef CONFIG_PM -extern int pcie_port_device_suspend(struct pci_dev *dev, pm_message_t state); -extern int pcie_port_device_resume(struct pci_dev *dev); +extern int pcie_port_device_suspend(struct device *dev); +extern int pcie_port_device_resume(struct device *dev); #endif extern void pcie_port_device_remove(struct pci_dev *dev); extern int __must_check pcie_port_bus_register(void); diff --git a/drivers/pci/pcie/portdrv_core.c b/drivers/pci/pcie/portdrv_core.c index 569af0015fce..5a5bfe7cdf5f 100644 --- a/drivers/pci/pcie/portdrv_core.c +++ b/drivers/pci/pcie/portdrv_core.c @@ -410,13 +410,12 @@ int pcie_port_device_register(struct pci_dev *dev) static int suspend_iter(struct device *dev, void *data) { struct pcie_port_service_driver *service_driver; - pm_message_t state = * (pm_message_t *) data; if ((dev->bus == &pcie_port_bus_type) && (dev->driver)) { service_driver = to_service_driver(dev->driver); if (service_driver->suspend) - service_driver->suspend(to_pcie_device(dev), state); + service_driver->suspend(to_pcie_device(dev)); } return 0; } @@ -424,11 +423,10 @@ static int suspend_iter(struct device *dev, void *data) /** * pcie_port_device_suspend - suspend port services associated with a PCIe port * @dev: PCI Express port to handle - * @state: Representation of system power management transition in progress */ -int pcie_port_device_suspend(struct pci_dev *dev, pm_message_t state) +int pcie_port_device_suspend(struct device *dev) { - return device_for_each_child(&dev->dev, &state, suspend_iter); + return device_for_each_child(dev, NULL, suspend_iter); } static int resume_iter(struct device *dev, void *data) @@ -448,11 +446,11 @@ static int resume_iter(struct device *dev, void *data) * pcie_port_device_suspend - resume port services associated with a PCIe port * @dev: PCI Express port to handle */ -int pcie_port_device_resume(struct pci_dev *dev) +int pcie_port_device_resume(struct device *dev) { - return device_for_each_child(&dev->dev, NULL, resume_iter); + return device_for_each_child(dev, NULL, resume_iter); } -#endif +#endif /* PM */ static int remove_iter(struct device *dev, void *data) { diff --git a/drivers/pci/pcie/portdrv_pci.c b/drivers/pci/pcie/portdrv_pci.c index 94d0e2af9bad..a61f4930d676 100644 --- a/drivers/pci/pcie/portdrv_pci.c +++ b/drivers/pci/pcie/portdrv_pci.c @@ -44,21 +44,21 @@ static int pcie_portdrv_restore_config(struct pci_dev *dev) } #ifdef CONFIG_PM -static int pcie_portdrv_suspend(struct pci_dev *dev, pm_message_t state) -{ - return pcie_port_device_suspend(dev, state); +static struct dev_pm_ops pcie_portdrv_pm_ops = { + .suspend = pcie_port_device_suspend, + .resume = pcie_port_device_resume, + .freeze = pcie_port_device_suspend, + .thaw = pcie_port_device_resume, + .poweroff = pcie_port_device_suspend, + .restore = pcie_port_device_resume, +}; -} +#define PCIE_PORTDRV_PM_OPS (&pcie_portdrv_pm_ops) -static int pcie_portdrv_resume(struct pci_dev *dev) -{ - pci_set_master(dev); - return pcie_port_device_resume(dev); -} -#else -#define pcie_portdrv_suspend NULL -#define pcie_portdrv_resume NULL -#endif +#else /* !PM */ + +#define PCIE_PORTDRV_PM_OPS NULL +#endif /* !PM */ /* * pcie_portdrv_probe - Probe PCI-Express port devices @@ -268,10 +268,9 @@ static struct pci_driver pcie_portdriver = { .probe = pcie_portdrv_probe, .remove = pcie_portdrv_remove, - .suspend = pcie_portdrv_suspend, - .resume = pcie_portdrv_resume, - .err_handler = &pcie_portdrv_err_handler, + + .driver.pm = PCIE_PORTDRV_PM_OPS, }; static int __init pcie_portdrv_init(void) diff --git a/include/linux/pcieport_if.h b/include/linux/pcieport_if.h index 5d2afcfa6bc1..b4c79545330b 100644 --- a/include/linux/pcieport_if.h +++ b/include/linux/pcieport_if.h @@ -59,7 +59,7 @@ struct pcie_port_service_driver { const char *name; int (*probe) (struct pcie_device *dev); void (*remove) (struct pcie_device *dev); - int (*suspend) (struct pcie_device *dev, pm_message_t state); + int (*suspend) (struct pcie_device *dev); int (*resume) (struct pcie_device *dev); /* Service Error Recovery Handler */ -- cgit v1.2.3