From c18487ee24381b40df3b8b4f54dd13ee9367a1ce Mon Sep 17 00:00:00 2001 From: Yaniv Rosner Date: Mon, 23 Jun 2008 20:27:52 -0700 Subject: bnx2x: New link code New Link code: Moving all the link related code (including the calculations, the initialization of the MAC and PHY and the external PHY's code) into a separated file. The changes from the code that used to be part of bnx2x.c (now called bnx2x_main.c) are: - Using separate structures for link inputs and link outputs to clearly identify what was configured and what is the outcome - Adding code to read external PHY FW version and print it as part of ethtool -i - Adding code to upgrade external PHY FW from ethtool -E with special magic number - Changing the link down indication to ERR level - Adding a lock on all PHY access to prevent an interrupt and setting changes to overlap - Adding support for emulation and FPGA (small chunk of code that really helps in the lab) - Adding support for 1G on BCM8706 PHY - Adding clear debug print incase of fan failure (the PHY type is now "failure") Signed-off-by: Yaniv Rosner Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller --- drivers/net/Makefile | 2 +- drivers/net/bnx2x.h | 180 +-- drivers/net/bnx2x_init.h | 7 - drivers/net/bnx2x_main.c | 3403 +++++++--------------------------------------- drivers/net/bnx2x_reg.h | 1939 +++++++++++++++++++------- 5 files changed, 1979 insertions(+), 3552 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/Makefile b/drivers/net/Makefile index 59842a109e9d..87703ffd4c1e 100644 --- a/drivers/net/Makefile +++ b/drivers/net/Makefile @@ -66,7 +66,7 @@ obj-$(CONFIG_FEALNX) += fealnx.o obj-$(CONFIG_TIGON3) += tg3.o obj-$(CONFIG_BNX2) += bnx2.o obj-$(CONFIG_BNX2X) += bnx2x.o -bnx2x-objs := bnx2x_main.o +bnx2x-objs := bnx2x_main.o bnx2x_link.o spidernet-y += spider_net.o spider_net_ethtool.o obj-$(CONFIG_SPIDER_NET) += spidernet.o sungem_phy.o obj-$(CONFIG_GELIC_NET) += ps3_gelic.o diff --git a/drivers/net/bnx2x.h b/drivers/net/bnx2x.h index 8e68d06510a6..2a13defda8ab 100644 --- a/drivers/net/bnx2x.h +++ b/drivers/net/bnx2x.h @@ -90,6 +90,12 @@ #define REG_RD_IND(bp, offset) bnx2x_reg_rd_ind(bp, offset) #define REG_WR_IND(bp, offset, val) bnx2x_reg_wr_ind(bp, offset, val) +#define REG_RD_DMAE(bp, offset, valp, len32) \ + do { \ + bnx2x_read_dmae(bp, offset, len32);\ + memcpy(valp, bnx2x_sp(bp, wb_data[0]), len32 * 4); \ + } while (0) + #define REG_WR_DMAE(bp, offset, val, len32) \ do { \ memcpy(bnx2x_sp(bp, wb_data[0]), val, len32 * 4); \ @@ -542,11 +548,8 @@ struct bnx2x { int pm_cap; int pcie_cap; - /* Used to synchronize phy accesses */ - spinlock_t phy_lock; - - struct work_struct reset_task; - struct work_struct sp_task; + struct work_struct sp_task; + struct work_struct reset_task; struct timer_list timer; int timer_interval; @@ -568,6 +571,8 @@ struct bnx2x { #define CHIP_REV_FPGA 0x0000f000 #define CHIP_REV_IS_SLOW(bp) ((CHIP_REV(bp) == CHIP_REV_EMUL) || \ (CHIP_REV(bp) == CHIP_REV_FPGA)) +#define CHIP_REV_IS_EMUL(bp) (CHIP_REV(bp) == CHIP_REV_EMUL) +#define CHIP_REV_IS_FPGA(bp) (CHIP_REV(bp) == CHIP_REV_FPGA) #define CHIP_METAL(bp) (((bp)->chip_id) & 0x00000ff0) #define CHIP_BOND_ID(bp) (((bp)->chip_id) & 0x0000000f) @@ -578,84 +583,29 @@ struct bnx2x { u32 hw_config; u32 board; - u32 serdes_config; - u32 lane_config; - u32 ext_phy_config; -#define XGXS_EXT_PHY_TYPE(bp) (bp->ext_phy_config & \ - PORT_HW_CFG_XGXS_EXT_PHY_TYPE_MASK) -#define SERDES_EXT_PHY_TYPE(bp) (bp->ext_phy_config & \ - PORT_HW_CFG_SERDES_EXT_PHY_TYPE_MASK) - - u32 speed_cap_mask; - u32 link_config; -#define SWITCH_CFG_1G PORT_FEATURE_CON_SWITCH_1G_SWITCH -#define SWITCH_CFG_10G PORT_FEATURE_CON_SWITCH_10G_SWITCH -#define SWITCH_CFG_AUTO_DETECT PORT_FEATURE_CON_SWITCH_AUTO_DETECT -#define SWITCH_CFG_ONE_TIME_DETECT \ - PORT_FEATURE_CON_SWITCH_ONE_TIME_DETECT - - u8 ser_lane; - u8 rx_lane_swap; - u8 tx_lane_swap; - - u8 link_up; - u8 phy_link_up; + + struct link_params link_params; + + struct link_vars link_vars; + + u32 link_config; u32 supported; /* link settings - missing defines */ #define SUPPORTED_2500baseT_Full (1 << 15) - u32 phy_flags; -/*#define PHY_SERDES_FLAG 0x1*/ -#define PHY_BMAC_FLAG 0x2 -#define PHY_EMAC_FLAG 0x4 -#define PHY_XGXS_FLAG 0x8 -#define PHY_SGMII_FLAG 0x10 -#define PHY_INT_MODE_MASK_FLAG 0x300 -#define PHY_INT_MODE_AUTO_POLLING_FLAG 0x100 -#define PHY_INT_MODE_LINK_READY_FLAG 0x200 - u32 phy_addr; + + /* used to synchronize phy accesses */ + struct mutex phy_mutex; + u32 phy_id; - u32 autoneg; -#define AUTONEG_CL37 SHARED_HW_CFG_AN_ENABLE_CL37 -#define AUTONEG_CL73 SHARED_HW_CFG_AN_ENABLE_CL73 -#define AUTONEG_BAM SHARED_HW_CFG_AN_ENABLE_BAM -#define AUTONEG_PARALLEL \ - SHARED_HW_CFG_AN_ENABLE_PARALLEL_DETECTION -#define AUTONEG_SGMII_FIBER_AUTODET \ - SHARED_HW_CFG_AN_EN_SGMII_FIBER_AUTO_DETECT -#define AUTONEG_REMOTE_PHY SHARED_HW_CFG_AN_ENABLE_REMOTE_PHY - - u32 req_autoneg; -#define AUTONEG_SPEED 0x1 -#define AUTONEG_FLOW_CTRL 0x2 - - u32 req_line_speed; -/* link settings - missing defines */ -#define SPEED_12000 12000 -#define SPEED_12500 12500 -#define SPEED_13000 13000 -#define SPEED_15000 15000 -#define SPEED_16000 16000 - - u32 req_duplex; - u32 req_flow_ctrl; -#define FLOW_CTRL_AUTO PORT_FEATURE_FLOW_CONTROL_AUTO -#define FLOW_CTRL_TX PORT_FEATURE_FLOW_CONTROL_TX -#define FLOW_CTRL_RX PORT_FEATURE_FLOW_CONTROL_RX -#define FLOW_CTRL_BOTH PORT_FEATURE_FLOW_CONTROL_BOTH -#define FLOW_CTRL_NONE PORT_FEATURE_FLOW_CONTROL_NONE u32 advertising; /* link settings - missing defines */ #define ADVERTISED_2500baseT_Full (1 << 15) - u32 link_status; - u32 line_speed; - u32 duplex; - u32 flow_ctrl; u32 bc_ver; @@ -765,6 +715,11 @@ struct bnx2x { #define DMAE_LEN32_MAX 0x400 +void bnx2x_read_dmae(struct bnx2x *bp, u32 src_addr, u32 len32); +void bnx2x_write_dmae(struct bnx2x *bp, dma_addr_t dma_addr, u32 dst_addr, + u32 len32); +int bnx2x_set_gpio(struct bnx2x *bp, int gpio_num, u32 mode); + /* MC hsi */ #define RX_COPY_THRESH 92 @@ -890,91 +845,6 @@ struct bnx2x { (1 << PARSING_FLAGS_OVER_ETHERNET_PROTOCOL_SHIFT)) -#define MDIO_AN_CL73_OR_37_COMPLETE \ - (MDIO_GP_STATUS_TOP_AN_STATUS1_CL73_AUTONEG_COMPLETE | \ - MDIO_GP_STATUS_TOP_AN_STATUS1_CL37_AUTONEG_COMPLETE) - -#define GP_STATUS_PAUSE_RSOLUTION_TXSIDE \ - MDIO_GP_STATUS_TOP_AN_STATUS1_PAUSE_RSOLUTION_TXSIDE -#define GP_STATUS_PAUSE_RSOLUTION_RXSIDE \ - MDIO_GP_STATUS_TOP_AN_STATUS1_PAUSE_RSOLUTION_RXSIDE -#define GP_STATUS_SPEED_MASK \ - MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_MASK -#define GP_STATUS_10M MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_10M -#define GP_STATUS_100M MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_100M -#define GP_STATUS_1G MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_1G -#define GP_STATUS_2_5G MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_2_5G -#define GP_STATUS_5G MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_5G -#define GP_STATUS_6G MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_6G -#define GP_STATUS_10G_HIG \ - MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_10G_HIG -#define GP_STATUS_10G_CX4 \ - MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_10G_CX4 -#define GP_STATUS_12G_HIG \ - MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_12G_HIG -#define GP_STATUS_12_5G MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_12_5G -#define GP_STATUS_13G MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_13G -#define GP_STATUS_15G MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_15G -#define GP_STATUS_16G MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_16G -#define GP_STATUS_1G_KX MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_1G_KX -#define GP_STATUS_10G_KX4 \ - MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_10G_KX4 - -#define LINK_10THD LINK_STATUS_SPEED_AND_DUPLEX_10THD -#define LINK_10TFD LINK_STATUS_SPEED_AND_DUPLEX_10TFD -#define LINK_100TXHD LINK_STATUS_SPEED_AND_DUPLEX_100TXHD -#define LINK_100T4 LINK_STATUS_SPEED_AND_DUPLEX_100T4 -#define LINK_100TXFD LINK_STATUS_SPEED_AND_DUPLEX_100TXFD -#define LINK_1000THD LINK_STATUS_SPEED_AND_DUPLEX_1000THD -#define LINK_1000TFD LINK_STATUS_SPEED_AND_DUPLEX_1000TFD -#define LINK_1000XFD LINK_STATUS_SPEED_AND_DUPLEX_1000XFD -#define LINK_2500THD LINK_STATUS_SPEED_AND_DUPLEX_2500THD -#define LINK_2500TFD LINK_STATUS_SPEED_AND_DUPLEX_2500TFD -#define LINK_2500XFD LINK_STATUS_SPEED_AND_DUPLEX_2500XFD -#define LINK_10GTFD LINK_STATUS_SPEED_AND_DUPLEX_10GTFD -#define LINK_10GXFD LINK_STATUS_SPEED_AND_DUPLEX_10GXFD -#define LINK_12GTFD LINK_STATUS_SPEED_AND_DUPLEX_12GTFD -#define LINK_12GXFD LINK_STATUS_SPEED_AND_DUPLEX_12GXFD -#define LINK_12_5GTFD LINK_STATUS_SPEED_AND_DUPLEX_12_5GTFD -#define LINK_12_5GXFD LINK_STATUS_SPEED_AND_DUPLEX_12_5GXFD -#define LINK_13GTFD LINK_STATUS_SPEED_AND_DUPLEX_13GTFD -#define LINK_13GXFD LINK_STATUS_SPEED_AND_DUPLEX_13GXFD -#define LINK_15GTFD LINK_STATUS_SPEED_AND_DUPLEX_15GTFD -#define LINK_15GXFD LINK_STATUS_SPEED_AND_DUPLEX_15GXFD -#define LINK_16GTFD LINK_STATUS_SPEED_AND_DUPLEX_16GTFD -#define LINK_16GXFD LINK_STATUS_SPEED_AND_DUPLEX_16GXFD - -#define NIG_STATUS_XGXS0_LINK10G \ - NIG_STATUS_INTERRUPT_PORT0_REG_STATUS_XGXS0_LINK10G -#define NIG_STATUS_XGXS0_LINK_STATUS \ - NIG_STATUS_INTERRUPT_PORT0_REG_STATUS_XGXS0_LINK_STATUS -#define NIG_STATUS_XGXS0_LINK_STATUS_SIZE \ - NIG_STATUS_INTERRUPT_PORT0_REG_STATUS_XGXS0_LINK_STATUS_SIZE -#define NIG_STATUS_SERDES0_LINK_STATUS \ - NIG_STATUS_INTERRUPT_PORT0_REG_STATUS_SERDES0_LINK_STATUS -#define NIG_MASK_MI_INT \ - NIG_MASK_INTERRUPT_PORT0_REG_MASK_EMAC0_MISC_MI_INT -#define NIG_MASK_XGXS0_LINK10G \ - NIG_MASK_INTERRUPT_PORT0_REG_MASK_XGXS0_LINK10G -#define NIG_MASK_XGXS0_LINK_STATUS \ - NIG_MASK_INTERRUPT_PORT0_REG_MASK_XGXS0_LINK_STATUS -#define NIG_MASK_SERDES0_LINK_STATUS \ - NIG_MASK_INTERRUPT_PORT0_REG_MASK_SERDES0_LINK_STATUS - -#define XGXS_RESET_BITS \ - (MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_XGXS0_RSTB_HW | \ - MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_XGXS0_IDDQ | \ - MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_XGXS0_PWRDWN | \ - MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_XGXS0_PWRDWN_SD | \ - MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_XGXS0_TXD_FIFO_RSTB) - -#define SERDES_RESET_BITS \ - (MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_SERDES0_RSTB_HW | \ - MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_SERDES0_IDDQ | \ - MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_SERDES0_PWRDWN | \ - MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_SERDES0_PWRDWN_SD) - - #define BNX2X_MC_ASSERT_BITS \ (GENERAL_ATTEN_OFFSET(TSTORM_FATAL_ASSERT_ATTENTION_BIT) | \ GENERAL_ATTEN_OFFSET(USTORM_FATAL_ASSERT_ATTENTION_BIT) | \ diff --git a/drivers/net/bnx2x_init.h b/drivers/net/bnx2x_init.h index 370686eef97c..bb0ee2dd2d80 100644 --- a/drivers/net/bnx2x_init.h +++ b/drivers/net/bnx2x_init.h @@ -87,10 +87,6 @@ union init_op { #include "bnx2x_init_values.h" static void bnx2x_reg_wr_ind(struct bnx2x *bp, u32 addr, u32 val); - -static void bnx2x_write_dmae(struct bnx2x *bp, dma_addr_t dma_addr, - u32 dst_addr, u32 len32); - static int bnx2x_gunzip(struct bnx2x *bp, u8 *zbuf, int len); static void bnx2x_init_str_wr(struct bnx2x *bp, u32 addr, const u32 *data, @@ -107,9 +103,6 @@ static void bnx2x_init_str_wr(struct bnx2x *bp, u32 addr, const u32 *data, } } -#define INIT_MEM_WR(reg, data, reg_off, len) \ - bnx2x_init_str_wr(bp, reg + reg_off*4, data, len) - static void bnx2x_init_ind_wr(struct bnx2x *bp, u32 addr, const u32 *data, u16 len) { diff --git a/drivers/net/bnx2x_main.c b/drivers/net/bnx2x_main.c index 70cba64732ca..7b547f03b565 100644 --- a/drivers/net/bnx2x_main.c +++ b/drivers/net/bnx2x_main.c @@ -61,6 +61,7 @@ #include "bnx2x_reg.h" #include "bnx2x_fw_defs.h" #include "bnx2x_hsi.h" +#include "bnx2x_link.h" #include "bnx2x.h" #include "bnx2x_init.h" @@ -174,7 +175,7 @@ static void bnx2x_post_dmae(struct bnx2x *bp, struct dmae_command *dmae, REG_WR(bp, dmae_reg_go_c[idx], 1); } -static void bnx2x_write_dmae(struct bnx2x *bp, dma_addr_t dma_addr, +void bnx2x_write_dmae(struct bnx2x *bp, dma_addr_t dma_addr, u32 dst_addr, u32 len32) { struct dmae_command *dmae = &bp->dmae; @@ -236,8 +237,7 @@ static void bnx2x_write_dmae(struct bnx2x *bp, dma_addr_t dma_addr, } } -#ifdef BNX2X_DMAE_RD -static void bnx2x_read_dmae(struct bnx2x *bp, u32 src_addr, u32 len32) +void bnx2x_read_dmae(struct bnx2x *bp, u32 src_addr, u32 len32) { struct dmae_command *dmae = &bp->dmae; int port = bp->port; @@ -294,7 +294,6 @@ static void bnx2x_read_dmae(struct bnx2x *bp, u32 src_addr, u32 len32) bp->slowpath->wb_data[2], bp->slowpath->wb_data[3]); */ } -#endif static int bnx2x_mc_assert(struct bnx2x *bp) { @@ -1133,2823 +1132,322 @@ static irqreturn_t bnx2x_interrupt(int irq, void *dev_instance) return IRQ_HANDLED; } -/* end of fast path */ - -/* PHY/MAC */ - -/* - * General service functions - */ - -static void bnx2x_leds_set(struct bnx2x *bp, unsigned int speed) -{ - int port = bp->port; - - NIG_WR(NIG_REG_LED_MODE_P0 + port*4, - ((bp->hw_config & SHARED_HW_CFG_LED_MODE_MASK) >> - SHARED_HW_CFG_LED_MODE_SHIFT)); - NIG_WR(NIG_REG_LED_CONTROL_OVERRIDE_TRAFFIC_P0 + port*4, 0); - - /* Set blinking rate to ~15.9Hz */ - NIG_WR(NIG_REG_LED_CONTROL_BLINK_RATE_P0 + port*4, - LED_BLINK_RATE_VAL); - NIG_WR(NIG_REG_LED_CONTROL_BLINK_RATE_ENA_P0 + port*4, 1); - - /* On Ax chip versions for speeds less than 10G - LED scheme is different */ - if ((CHIP_REV(bp) == CHIP_REV_Ax) && (speed < SPEED_10000)) { - NIG_WR(NIG_REG_LED_CONTROL_OVERRIDE_TRAFFIC_P0 + port*4, 1); - NIG_WR(NIG_REG_LED_CONTROL_TRAFFIC_P0 + port*4, 0); - NIG_WR(NIG_REG_LED_CONTROL_BLINK_TRAFFIC_P0 + port*4, 1); - } -} - -static void bnx2x_leds_unset(struct bnx2x *bp) -{ - int port = bp->port; - - NIG_WR(NIG_REG_LED_10G_P0 + port*4, 0); - NIG_WR(NIG_REG_LED_MODE_P0 + port*4, SHARED_HW_CFG_LED_MAC1); -} - -static u32 bnx2x_bits_en(struct bnx2x *bp, u32 reg, u32 bits) -{ - u32 val = REG_RD(bp, reg); - - val |= bits; - REG_WR(bp, reg, val); - return val; -} - -static u32 bnx2x_bits_dis(struct bnx2x *bp, u32 reg, u32 bits) -{ - u32 val = REG_RD(bp, reg); - - val &= ~bits; - REG_WR(bp, reg, val); - return val; -} - -static int bnx2x_hw_lock(struct bnx2x *bp, u32 resource) -{ - u32 cnt; - u32 lock_status; - u32 resource_bit = (1 << resource); - u8 func = bp->port; - - /* Validating that the resource is within range */ - if (resource > HW_LOCK_MAX_RESOURCE_VALUE) { - DP(NETIF_MSG_HW, - "resource(0x%x) > HW_LOCK_MAX_RESOURCE_VALUE(0x%x)\n", - resource, HW_LOCK_MAX_RESOURCE_VALUE); - return -EINVAL; - } - - /* Validating that the resource is not already taken */ - lock_status = REG_RD(bp, MISC_REG_DRIVER_CONTROL_1 + func*8); - if (lock_status & resource_bit) { - DP(NETIF_MSG_HW, "lock_status 0x%x resource_bit 0x%x\n", - lock_status, resource_bit); - return -EEXIST; - } - - /* Try for 1 second every 5ms */ - for (cnt = 0; cnt < 200; cnt++) { - /* Try to acquire the lock */ - REG_WR(bp, MISC_REG_DRIVER_CONTROL_1 + func*8 + 4, - resource_bit); - lock_status = REG_RD(bp, MISC_REG_DRIVER_CONTROL_1 + func*8); - if (lock_status & resource_bit) - return 0; - - msleep(5); - } - DP(NETIF_MSG_HW, "Timeout\n"); - return -EAGAIN; -} - -static int bnx2x_hw_unlock(struct bnx2x *bp, u32 resource) -{ - u32 lock_status; - u32 resource_bit = (1 << resource); - u8 func = bp->port; - - /* Validating that the resource is within range */ - if (resource > HW_LOCK_MAX_RESOURCE_VALUE) { - DP(NETIF_MSG_HW, - "resource(0x%x) > HW_LOCK_MAX_RESOURCE_VALUE(0x%x)\n", - resource, HW_LOCK_MAX_RESOURCE_VALUE); - return -EINVAL; - } - - /* Validating that the resource is currently taken */ - lock_status = REG_RD(bp, MISC_REG_DRIVER_CONTROL_1 + func*8); - if (!(lock_status & resource_bit)) { - DP(NETIF_MSG_HW, "lock_status 0x%x resource_bit 0x%x\n", - lock_status, resource_bit); - return -EFAULT; - } - - REG_WR(bp, MISC_REG_DRIVER_CONTROL_1 + func*8, resource_bit); - return 0; -} - -static int bnx2x_set_gpio(struct bnx2x *bp, int gpio_num, u32 mode) -{ - /* The GPIO should be swapped if swap register is set and active */ - int gpio_port = (REG_RD(bp, NIG_REG_PORT_SWAP) && - REG_RD(bp, NIG_REG_STRAP_OVERRIDE)) ^ bp->port; - int gpio_shift = gpio_num + - (gpio_port ? MISC_REGISTERS_GPIO_PORT_SHIFT : 0); - u32 gpio_mask = (1 << gpio_shift); - u32 gpio_reg; - - if (gpio_num > MISC_REGISTERS_GPIO_3) { - BNX2X_ERR("Invalid GPIO %d\n", gpio_num); - return -EINVAL; - } - - bnx2x_hw_lock(bp, HW_LOCK_RESOURCE_GPIO); - /* read GPIO and mask except the float bits */ - gpio_reg = (REG_RD(bp, MISC_REG_GPIO) & MISC_REGISTERS_GPIO_FLOAT); - - switch (mode) { - case MISC_REGISTERS_GPIO_OUTPUT_LOW: - DP(NETIF_MSG_LINK, "Set GPIO %d (shift %d) -> output low\n", - gpio_num, gpio_shift); - /* clear FLOAT and set CLR */ - gpio_reg &= ~(gpio_mask << MISC_REGISTERS_GPIO_FLOAT_POS); - gpio_reg |= (gpio_mask << MISC_REGISTERS_GPIO_CLR_POS); - break; - - case MISC_REGISTERS_GPIO_OUTPUT_HIGH: - DP(NETIF_MSG_LINK, "Set GPIO %d (shift %d) -> output high\n", - gpio_num, gpio_shift); - /* clear FLOAT and set SET */ - gpio_reg &= ~(gpio_mask << MISC_REGISTERS_GPIO_FLOAT_POS); - gpio_reg |= (gpio_mask << MISC_REGISTERS_GPIO_SET_POS); - break; - - case MISC_REGISTERS_GPIO_INPUT_HI_Z : - DP(NETIF_MSG_LINK, "Set GPIO %d (shift %d) -> input\n", - gpio_num, gpio_shift); - /* set FLOAT */ - gpio_reg |= (gpio_mask << MISC_REGISTERS_GPIO_FLOAT_POS); - break; - - default: - break; - } - - REG_WR(bp, MISC_REG_GPIO, gpio_reg); - bnx2x_hw_unlock(bp, HW_LOCK_RESOURCE_GPIO); - - return 0; -} - -static int bnx2x_set_spio(struct bnx2x *bp, int spio_num, u32 mode) -{ - u32 spio_mask = (1 << spio_num); - u32 spio_reg; - - if ((spio_num < MISC_REGISTERS_SPIO_4) || - (spio_num > MISC_REGISTERS_SPIO_7)) { - BNX2X_ERR("Invalid SPIO %d\n", spio_num); - return -EINVAL; - } - - bnx2x_hw_lock(bp, HW_LOCK_RESOURCE_SPIO); - /* read SPIO and mask except the float bits */ - spio_reg = (REG_RD(bp, MISC_REG_SPIO) & MISC_REGISTERS_SPIO_FLOAT); - - switch (mode) { - case MISC_REGISTERS_SPIO_OUTPUT_LOW : - DP(NETIF_MSG_LINK, "Set SPIO %d -> output low\n", spio_num); - /* clear FLOAT and set CLR */ - spio_reg &= ~(spio_mask << MISC_REGISTERS_SPIO_FLOAT_POS); - spio_reg |= (spio_mask << MISC_REGISTERS_SPIO_CLR_POS); - break; - - case MISC_REGISTERS_SPIO_OUTPUT_HIGH : - DP(NETIF_MSG_LINK, "Set SPIO %d -> output high\n", spio_num); - /* clear FLOAT and set SET */ - spio_reg &= ~(spio_mask << MISC_REGISTERS_SPIO_FLOAT_POS); - spio_reg |= (spio_mask << MISC_REGISTERS_SPIO_SET_POS); - break; - - case MISC_REGISTERS_SPIO_INPUT_HI_Z: - DP(NETIF_MSG_LINK, "Set SPIO %d -> input\n", spio_num); - /* set FLOAT */ - spio_reg |= (spio_mask << MISC_REGISTERS_SPIO_FLOAT_POS); - break; - - default: - break; - } - - REG_WR(bp, MISC_REG_SPIO, spio_reg); - bnx2x_hw_unlock(bp, HW_LOCK_RESOURCE_SPIO); - - return 0; -} - -static int bnx2x_mdio22_write(struct bnx2x *bp, u32 reg, u32 val) -{ - int port = bp->port; - u32 emac_base = port ? GRCBASE_EMAC1 : GRCBASE_EMAC0; - u32 tmp; - int i, rc; - -/* DP(NETIF_MSG_HW, "phy_addr 0x%x reg 0x%x val 0x%08x\n", - bp->phy_addr, reg, val); */ - - if (bp->phy_flags & PHY_INT_MODE_AUTO_POLLING_FLAG) { - - tmp = REG_RD(bp, emac_base + EMAC_REG_EMAC_MDIO_MODE); - tmp &= ~EMAC_MDIO_MODE_AUTO_POLL; - EMAC_WR(EMAC_REG_EMAC_MDIO_MODE, tmp); - REG_RD(bp, emac_base + EMAC_REG_EMAC_MDIO_MODE); - udelay(40); - } - - tmp = ((bp->phy_addr << 21) | (reg << 16) | - (val & EMAC_MDIO_COMM_DATA) | - EMAC_MDIO_COMM_COMMAND_WRITE_22 | - EMAC_MDIO_COMM_START_BUSY); - EMAC_WR(EMAC_REG_EMAC_MDIO_COMM, tmp); - - for (i = 0; i < 50; i++) { - udelay(10); - - tmp = REG_RD(bp, emac_base + EMAC_REG_EMAC_MDIO_COMM); - if (!(tmp & EMAC_MDIO_COMM_START_BUSY)) { - udelay(5); - break; - } - } - - if (tmp & EMAC_MDIO_COMM_START_BUSY) { - BNX2X_ERR("write phy register failed\n"); - - rc = -EBUSY; - } else { - rc = 0; - } - - if (bp->phy_flags & PHY_INT_MODE_AUTO_POLLING_FLAG) { - - tmp = REG_RD(bp, emac_base + EMAC_REG_EMAC_MDIO_MODE); - tmp |= EMAC_MDIO_MODE_AUTO_POLL; - EMAC_WR(EMAC_REG_EMAC_MDIO_MODE, tmp); - } - - return rc; -} - -static int bnx2x_mdio22_read(struct bnx2x *bp, u32 reg, u32 *ret_val) -{ - int port = bp->port; - u32 emac_base = port ? GRCBASE_EMAC1 : GRCBASE_EMAC0; - u32 val; - int i, rc; - - if (bp->phy_flags & PHY_INT_MODE_AUTO_POLLING_FLAG) { - - val = REG_RD(bp, emac_base + EMAC_REG_EMAC_MDIO_MODE); - val &= ~EMAC_MDIO_MODE_AUTO_POLL; - EMAC_WR(EMAC_REG_EMAC_MDIO_MODE, val); - REG_RD(bp, emac_base + EMAC_REG_EMAC_MDIO_MODE); - udelay(40); - } - - val = ((bp->phy_addr << 21) | (reg << 16) | - EMAC_MDIO_COMM_COMMAND_READ_22 | - EMAC_MDIO_COMM_START_BUSY); - EMAC_WR(EMAC_REG_EMAC_MDIO_COMM, val); - - for (i = 0; i < 50; i++) { - udelay(10); - - val = REG_RD(bp, emac_base + EMAC_REG_EMAC_MDIO_COMM); - if (!(val & EMAC_MDIO_COMM_START_BUSY)) { - val &= EMAC_MDIO_COMM_DATA; - break; - } - } - - if (val & EMAC_MDIO_COMM_START_BUSY) { - BNX2X_ERR("read phy register failed\n"); - - *ret_val = 0x0; - rc = -EBUSY; - } else { - *ret_val = val; - rc = 0; - } - - if (bp->phy_flags & PHY_INT_MODE_AUTO_POLLING_FLAG) { - - val = REG_RD(bp, emac_base + EMAC_REG_EMAC_MDIO_MODE); - val |= EMAC_MDIO_MODE_AUTO_POLL; - EMAC_WR(EMAC_REG_EMAC_MDIO_MODE, val); - } - -/* DP(NETIF_MSG_HW, "phy_addr 0x%x reg 0x%x ret_val 0x%08x\n", - bp->phy_addr, reg, *ret_val); */ - - return rc; -} - -static int bnx2x_mdio45_ctrl_write(struct bnx2x *bp, u32 mdio_ctrl, - u32 phy_addr, u32 reg, u32 addr, u32 val) -{ - u32 tmp; - int i, rc = 0; - - /* set clause 45 mode, slow down the MDIO clock to 2.5MHz - * (a value of 49==0x31) and make sure that the AUTO poll is off - */ - tmp = REG_RD(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE); - tmp &= ~(EMAC_MDIO_MODE_AUTO_POLL | EMAC_MDIO_MODE_CLOCK_CNT); - tmp |= (EMAC_MDIO_MODE_CLAUSE_45 | - (49 << EMAC_MDIO_MODE_CLOCK_CNT_BITSHIFT)); - REG_WR(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE, tmp); - REG_RD(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE); - udelay(40); - - /* address */ - tmp = ((phy_addr << 21) | (reg << 16) | addr | - EMAC_MDIO_COMM_COMMAND_ADDRESS | - EMAC_MDIO_COMM_START_BUSY); - REG_WR(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_COMM, tmp); - - for (i = 0; i < 50; i++) { - udelay(10); - - tmp = REG_RD(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_COMM); - if (!(tmp & EMAC_MDIO_COMM_START_BUSY)) { - udelay(5); - break; - } - } - if (tmp & EMAC_MDIO_COMM_START_BUSY) { - BNX2X_ERR("write phy register failed\n"); - - rc = -EBUSY; - - } else { - /* data */ - tmp = ((phy_addr << 21) | (reg << 16) | val | - EMAC_MDIO_COMM_COMMAND_WRITE_45 | - EMAC_MDIO_COMM_START_BUSY); - REG_WR(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_COMM, tmp); - - for (i = 0; i < 50; i++) { - udelay(10); - - tmp = REG_RD(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_COMM); - if (!(tmp & EMAC_MDIO_COMM_START_BUSY)) { - udelay(5); - break; - } - } - - if (tmp & EMAC_MDIO_COMM_START_BUSY) { - BNX2X_ERR("write phy register failed\n"); - - rc = -EBUSY; - } - } - - /* unset clause 45 mode, set the MDIO clock to a faster value - * (0x13 => 6.25Mhz) and restore the AUTO poll if needed - */ - tmp = REG_RD(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE); - tmp &= ~(EMAC_MDIO_MODE_CLAUSE_45 | EMAC_MDIO_MODE_CLOCK_CNT); - tmp |= (0x13 << EMAC_MDIO_MODE_CLOCK_CNT_BITSHIFT); - if (bp->phy_flags & PHY_INT_MODE_AUTO_POLLING_FLAG) - tmp |= EMAC_MDIO_MODE_AUTO_POLL; - REG_WR(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE, tmp); - - return rc; -} - -static int bnx2x_mdio45_write(struct bnx2x *bp, u32 phy_addr, u32 reg, - u32 addr, u32 val) -{ - u32 emac_base = bp->port ? GRCBASE_EMAC1 : GRCBASE_EMAC0; - - return bnx2x_mdio45_ctrl_write(bp, emac_base, phy_addr, - reg, addr, val); -} - -static int bnx2x_mdio45_ctrl_read(struct bnx2x *bp, u32 mdio_ctrl, - u32 phy_addr, u32 reg, u32 addr, - u32 *ret_val) -{ - u32 val; - int i, rc = 0; - - /* set clause 45 mode, slow down the MDIO clock to 2.5MHz - * (a value of 49==0x31) and make sure that the AUTO poll is off - */ - val = REG_RD(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE); - val &= ~(EMAC_MDIO_MODE_AUTO_POLL | EMAC_MDIO_MODE_CLOCK_CNT); - val |= (EMAC_MDIO_MODE_CLAUSE_45 | - (49 << EMAC_MDIO_MODE_CLOCK_CNT_BITSHIFT)); - REG_WR(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE, val); - REG_RD(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE); - udelay(40); - - /* address */ - val = ((phy_addr << 21) | (reg << 16) | addr | - EMAC_MDIO_COMM_COMMAND_ADDRESS | - EMAC_MDIO_COMM_START_BUSY); - REG_WR(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_COMM, val); - - for (i = 0; i < 50; i++) { - udelay(10); - - val = REG_RD(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_COMM); - if (!(val & EMAC_MDIO_COMM_START_BUSY)) { - udelay(5); - break; - } - } - if (val & EMAC_MDIO_COMM_START_BUSY) { - BNX2X_ERR("read phy register failed\n"); - - *ret_val = 0; - rc = -EBUSY; - - } else { - /* data */ - val = ((phy_addr << 21) | (reg << 16) | - EMAC_MDIO_COMM_COMMAND_READ_45 | - EMAC_MDIO_COMM_START_BUSY); - REG_WR(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_COMM, val); - - for (i = 0; i < 50; i++) { - udelay(10); - - val = REG_RD(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_COMM); - if (!(val & EMAC_MDIO_COMM_START_BUSY)) { - val &= EMAC_MDIO_COMM_DATA; - break; - } - } - - if (val & EMAC_MDIO_COMM_START_BUSY) { - BNX2X_ERR("read phy register failed\n"); - - val = 0; - rc = -EBUSY; - } - - *ret_val = val; - } - - /* unset clause 45 mode, set the MDIO clock to a faster value - * (0x13 => 6.25Mhz) and restore the AUTO poll if needed - */ - val = REG_RD(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE); - val &= ~(EMAC_MDIO_MODE_CLAUSE_45 | EMAC_MDIO_MODE_CLOCK_CNT); - val |= (0x13 << EMAC_MDIO_MODE_CLOCK_CNT_BITSHIFT); - if (bp->phy_flags & PHY_INT_MODE_AUTO_POLLING_FLAG) - val |= EMAC_MDIO_MODE_AUTO_POLL; - REG_WR(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE, val); - - return rc; -} - -static int bnx2x_mdio45_read(struct bnx2x *bp, u32 phy_addr, u32 reg, - u32 addr, u32 *ret_val) -{ - u32 emac_base = bp->port ? GRCBASE_EMAC1 : GRCBASE_EMAC0; - - return bnx2x_mdio45_ctrl_read(bp, emac_base, phy_addr, - reg, addr, ret_val); -} - -static int bnx2x_mdio45_vwrite(struct bnx2x *bp, u32 phy_addr, u32 reg, - u32 addr, u32 val) -{ - int i; - u32 rd_val; - - might_sleep(); - for (i = 0; i < 10; i++) { - bnx2x_mdio45_write(bp, phy_addr, reg, addr, val); - msleep(5); - bnx2x_mdio45_read(bp, phy_addr, reg, addr, &rd_val); - /* if the read value is not the same as the value we wrote, - we should write it again */ - if (rd_val == val) - return 0; - } - BNX2X_ERR("MDIO write in CL45 failed\n"); - return -EBUSY; -} - -/* - * link management - */ - -static void bnx2x_pause_resolve(struct bnx2x *bp, u32 pause_result) -{ - switch (pause_result) { /* ASYM P ASYM P */ - case 0xb: /* 1 0 1 1 */ - bp->flow_ctrl = FLOW_CTRL_TX; - break; - - case 0xe: /* 1 1 1 0 */ - bp->flow_ctrl = FLOW_CTRL_RX; - break; - - case 0x5: /* 0 1 0 1 */ - case 0x7: /* 0 1 1 1 */ - case 0xd: /* 1 1 0 1 */ - case 0xf: /* 1 1 1 1 */ - bp->flow_ctrl = FLOW_CTRL_BOTH; - break; - - default: - break; - } -} - -static u8 bnx2x_ext_phy_resove_fc(struct bnx2x *bp) -{ - u32 ext_phy_addr; - u32 ld_pause; /* local */ - u32 lp_pause; /* link partner */ - u32 an_complete; /* AN complete */ - u32 pause_result; - u8 ret = 0; - - ext_phy_addr = ((bp->ext_phy_config & - PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK) >> - PORT_HW_CFG_XGXS_EXT_PHY_ADDR_SHIFT); - - /* read twice */ - bnx2x_mdio45_read(bp, ext_phy_addr, - EXT_PHY_KR_AUTO_NEG_DEVAD, - EXT_PHY_KR_STATUS, &an_complete); - bnx2x_mdio45_read(bp, ext_phy_addr, - EXT_PHY_KR_AUTO_NEG_DEVAD, - EXT_PHY_KR_STATUS, &an_complete); - - if (an_complete & EXT_PHY_KR_AUTO_NEG_COMPLETE) { - ret = 1; - bnx2x_mdio45_read(bp, ext_phy_addr, - EXT_PHY_KR_AUTO_NEG_DEVAD, - EXT_PHY_KR_AUTO_NEG_ADVERT, &ld_pause); - bnx2x_mdio45_read(bp, ext_phy_addr, - EXT_PHY_KR_AUTO_NEG_DEVAD, - EXT_PHY_KR_LP_AUTO_NEG, &lp_pause); - pause_result = (ld_pause & - EXT_PHY_KR_AUTO_NEG_ADVERT_PAUSE_MASK) >> 8; - pause_result |= (lp_pause & - EXT_PHY_KR_AUTO_NEG_ADVERT_PAUSE_MASK) >> 10; - DP(NETIF_MSG_LINK, "Ext PHY pause result 0x%x \n", - pause_result); - bnx2x_pause_resolve(bp, pause_result); - } - return ret; -} - -static void bnx2x_flow_ctrl_resolve(struct bnx2x *bp, u32 gp_status) -{ - u32 ld_pause; /* local driver */ - u32 lp_pause; /* link partner */ - u32 pause_result; - - bp->flow_ctrl = 0; - - /* resolve from gp_status in case of AN complete and not sgmii */ - if ((bp->req_autoneg & AUTONEG_FLOW_CTRL) && - (gp_status & MDIO_AN_CL73_OR_37_COMPLETE) && - (!(bp->phy_flags & PHY_SGMII_FLAG)) && - (XGXS_EXT_PHY_TYPE(bp) == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT)) { - - MDIO_SET_REG_BANK(bp, MDIO_REG_BANK_COMBO_IEEE0); - bnx2x_mdio22_read(bp, MDIO_COMBO_IEEE0_AUTO_NEG_ADV, - &ld_pause); - bnx2x_mdio22_read(bp, - MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1, - &lp_pause); - pause_result = (ld_pause & - MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_MASK)>>5; - pause_result |= (lp_pause & - MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_MASK)>>7; - DP(NETIF_MSG_LINK, "pause_result 0x%x\n", pause_result); - bnx2x_pause_resolve(bp, pause_result); - } else if (!(bp->req_autoneg & AUTONEG_FLOW_CTRL) || - !(bnx2x_ext_phy_resove_fc(bp))) { - /* forced speed */ - if (bp->req_autoneg & AUTONEG_FLOW_CTRL) { - switch (bp->req_flow_ctrl) { - case FLOW_CTRL_AUTO: - if (bp->dev->mtu <= 4500) - bp->flow_ctrl = FLOW_CTRL_BOTH; - else - bp->flow_ctrl = FLOW_CTRL_TX; - break; - - case FLOW_CTRL_TX: - bp->flow_ctrl = FLOW_CTRL_TX; - break; - - case FLOW_CTRL_RX: - if (bp->dev->mtu <= 4500) - bp->flow_ctrl = FLOW_CTRL_RX; - break; - - case FLOW_CTRL_BOTH: - if (bp->dev->mtu <= 4500) - bp->flow_ctrl = FLOW_CTRL_BOTH; - else - bp->flow_ctrl = FLOW_CTRL_TX; - break; - - case FLOW_CTRL_NONE: - default: - break; - } - } else { /* forced mode */ - switch (bp->req_flow_ctrl) { - case FLOW_CTRL_AUTO: - DP(NETIF_MSG_LINK, "req_flow_ctrl 0x%x while" - " req_autoneg 0x%x\n", - bp->req_flow_ctrl, bp->req_autoneg); - break; - - case FLOW_CTRL_TX: - case FLOW_CTRL_RX: - case FLOW_CTRL_BOTH: - bp->flow_ctrl = bp->req_flow_ctrl; - break; - - case FLOW_CTRL_NONE: - default: - break; - } - } - } - DP(NETIF_MSG_LINK, "flow_ctrl 0x%x\n", bp->flow_ctrl); -} - -static void bnx2x_link_settings_status(struct bnx2x *bp, u32 gp_status) -{ - bp->link_status = 0; - - if (gp_status & MDIO_GP_STATUS_TOP_AN_STATUS1_LINK_STATUS) { - DP(NETIF_MSG_LINK, "phy link up\n"); - - bp->phy_link_up = 1; - bp->link_status |= LINK_STATUS_LINK_UP; - - if (gp_status & MDIO_GP_STATUS_TOP_AN_STATUS1_DUPLEX_STATUS) - bp->duplex = DUPLEX_FULL; - else - bp->duplex = DUPLEX_HALF; - - bnx2x_flow_ctrl_resolve(bp, gp_status); - - switch (gp_status & GP_STATUS_SPEED_MASK) { - case GP_STATUS_10M: - bp->line_speed = SPEED_10; - if (bp->duplex == DUPLEX_FULL) - bp->link_status |= LINK_10TFD; - else - bp->link_status |= LINK_10THD; - break; - - case GP_STATUS_100M: - bp->line_speed = SPEED_100; - if (bp->duplex == DUPLEX_FULL) - bp->link_status |= LINK_100TXFD; - else - bp->link_status |= LINK_100TXHD; - break; - - case GP_STATUS_1G: - case GP_STATUS_1G_KX: - bp->line_speed = SPEED_1000; - if (bp->duplex == DUPLEX_FULL) - bp->link_status |= LINK_1000TFD; - else - bp->link_status |= LINK_1000THD; - break; - - case GP_STATUS_2_5G: - bp->line_speed = SPEED_2500; - if (bp->duplex == DUPLEX_FULL) - bp->link_status |= LINK_2500TFD; - else - bp->link_status |= LINK_2500THD; - break; - - case GP_STATUS_5G: - case GP_STATUS_6G: - BNX2X_ERR("link speed unsupported gp_status 0x%x\n", - gp_status); - break; - - case GP_STATUS_10G_KX4: - case GP_STATUS_10G_HIG: - case GP_STATUS_10G_CX4: - bp->line_speed = SPEED_10000; - bp->link_status |= LINK_10GTFD; - break; - - case GP_STATUS_12G_HIG: - bp->line_speed = SPEED_12000; - bp->link_status |= LINK_12GTFD; - break; - - case GP_STATUS_12_5G: - bp->line_speed = SPEED_12500; - bp->link_status |= LINK_12_5GTFD; - break; - - case GP_STATUS_13G: - bp->line_speed = SPEED_13000; - bp->link_status |= LINK_13GTFD; - break; - - case GP_STATUS_15G: - bp->line_speed = SPEED_15000; - bp->link_status |= LINK_15GTFD; - break; - - case GP_STATUS_16G: - bp->line_speed = SPEED_16000; - bp->link_status |= LINK_16GTFD; - break; - - default: - BNX2X_ERR("link speed unsupported gp_status 0x%x\n", - gp_status); - break; - } - - bp->link_status |= LINK_STATUS_SERDES_LINK; - - if (bp->req_autoneg & AUTONEG_SPEED) { - bp->link_status |= LINK_STATUS_AUTO_NEGOTIATE_ENABLED; - - if (gp_status & MDIO_AN_CL73_OR_37_COMPLETE) - bp->link_status |= - LINK_STATUS_AUTO_NEGOTIATE_COMPLETE; - - if (bp->autoneg & AUTONEG_PARALLEL) - bp->link_status |= - LINK_STATUS_PARALLEL_DETECTION_USED; - } - - if (bp->flow_ctrl & FLOW_CTRL_TX) - bp->link_status |= LINK_STATUS_TX_FLOW_CONTROL_ENABLED; - - if (bp->flow_ctrl & FLOW_CTRL_RX) - bp->link_status |= LINK_STATUS_RX_FLOW_CONTROL_ENABLED; - - } else { /* link_down */ - DP(NETIF_MSG_LINK, "phy link down\n"); - - bp->phy_link_up = 0; - - bp->line_speed = 0; - bp->duplex = DUPLEX_FULL; - bp->flow_ctrl = 0; - } - - DP(NETIF_MSG_LINK, "gp_status 0x%x phy_link_up %d\n" - DP_LEVEL " line_speed %d duplex %d flow_ctrl 0x%x" - " link_status 0x%x\n", - gp_status, bp->phy_link_up, bp->line_speed, bp->duplex, - bp->flow_ctrl, bp->link_status); -} - -static void bnx2x_link_int_ack(struct bnx2x *bp, int is_10g) -{ - int port = bp->port; - - /* first reset all status - * we assume only one line will be change at a time */ - bnx2x_bits_dis(bp, NIG_REG_STATUS_INTERRUPT_PORT0 + port*4, - (NIG_STATUS_XGXS0_LINK10G | - NIG_STATUS_XGXS0_LINK_STATUS | - NIG_STATUS_SERDES0_LINK_STATUS)); - if (bp->phy_link_up) { - if (is_10g) { - /* Disable the 10G link interrupt - * by writing 1 to the status register - */ - DP(NETIF_MSG_LINK, "10G XGXS phy link up\n"); - bnx2x_bits_en(bp, - NIG_REG_STATUS_INTERRUPT_PORT0 + port*4, - NIG_STATUS_XGXS0_LINK10G); - - } else if (bp->phy_flags & PHY_XGXS_FLAG) { - /* Disable the link interrupt - * by writing 1 to the relevant lane - * in the status register - */ - DP(NETIF_MSG_LINK, "1G XGXS phy link up\n"); - bnx2x_bits_en(bp, - NIG_REG_STATUS_INTERRUPT_PORT0 + port*4, - ((1 << bp->ser_lane) << - NIG_STATUS_XGXS0_LINK_STATUS_SIZE)); - - } else { /* SerDes */ - DP(NETIF_MSG_LINK, "SerDes phy link up\n"); - /* Disable the link interrupt - * by writing 1 to the status register - */ - bnx2x_bits_en(bp, - NIG_REG_STATUS_INTERRUPT_PORT0 + port*4, - NIG_STATUS_SERDES0_LINK_STATUS); - } - - } else { /* link_down */ - } -} - -static int bnx2x_ext_phy_is_link_up(struct bnx2x *bp) -{ - u32 ext_phy_type; - u32 ext_phy_addr; - u32 val1 = 0, val2; - u32 rx_sd, pcs_status; - - if (bp->phy_flags & PHY_XGXS_FLAG) { - ext_phy_addr = ((bp->ext_phy_config & - PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK) >> - PORT_HW_CFG_XGXS_EXT_PHY_ADDR_SHIFT); - - ext_phy_type = XGXS_EXT_PHY_TYPE(bp); - switch (ext_phy_type) { - case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT: - DP(NETIF_MSG_LINK, "XGXS Direct\n"); - val1 = 1; - break; - - case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8705: - DP(NETIF_MSG_LINK, "XGXS 8705\n"); - bnx2x_mdio45_read(bp, ext_phy_addr, - EXT_PHY_OPT_WIS_DEVAD, - EXT_PHY_OPT_LASI_STATUS, &val1); - DP(NETIF_MSG_LINK, "8705 LASI status 0x%x\n", val1); - - bnx2x_mdio45_read(bp, ext_phy_addr, - EXT_PHY_OPT_WIS_DEVAD, - EXT_PHY_OPT_LASI_STATUS, &val1); - DP(NETIF_MSG_LINK, "8705 LASI status 0x%x\n", val1); - - bnx2x_mdio45_read(bp, ext_phy_addr, - EXT_PHY_OPT_PMA_PMD_DEVAD, - EXT_PHY_OPT_PMD_RX_SD, &rx_sd); - DP(NETIF_MSG_LINK, "8705 rx_sd 0x%x\n", rx_sd); - val1 = (rx_sd & 0x1); - break; - - case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8706: - DP(NETIF_MSG_LINK, "XGXS 8706\n"); - bnx2x_mdio45_read(bp, ext_phy_addr, - EXT_PHY_OPT_PMA_PMD_DEVAD, - EXT_PHY_OPT_LASI_STATUS, &val1); - DP(NETIF_MSG_LINK, "8706 LASI status 0x%x\n", val1); - - bnx2x_mdio45_read(bp, ext_phy_addr, - EXT_PHY_OPT_PMA_PMD_DEVAD, - EXT_PHY_OPT_LASI_STATUS, &val1); - DP(NETIF_MSG_LINK, "8706 LASI status 0x%x\n", val1); - - bnx2x_mdio45_read(bp, ext_phy_addr, - EXT_PHY_OPT_PMA_PMD_DEVAD, - EXT_PHY_OPT_PMD_RX_SD, &rx_sd); - bnx2x_mdio45_read(bp, ext_phy_addr, - EXT_PHY_OPT_PCS_DEVAD, - EXT_PHY_OPT_PCS_STATUS, &pcs_status); - bnx2x_mdio45_read(bp, ext_phy_addr, - EXT_PHY_AUTO_NEG_DEVAD, - EXT_PHY_OPT_AN_LINK_STATUS, &val2); - - DP(NETIF_MSG_LINK, "8706 rx_sd 0x%x" - " pcs_status 0x%x 1Gbps link_status 0x%x 0x%x\n", - rx_sd, pcs_status, val2, (val2 & (1<<1))); - /* link is up if both bit 0 of pmd_rx_sd and - * bit 0 of pcs_status are set, or if the autoneg bit - 1 is set - */ - val1 = ((rx_sd & pcs_status & 0x1) || (val2 & (1<<1))); - break; - - case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8072: - bnx2x_hw_lock(bp, HW_LOCK_RESOURCE_8072_MDIO); - - /* clear the interrupt LASI status register */ - bnx2x_mdio45_ctrl_read(bp, GRCBASE_EMAC0, - ext_phy_addr, - EXT_PHY_KR_PCS_DEVAD, - EXT_PHY_KR_LASI_STATUS, &val2); - bnx2x_mdio45_ctrl_read(bp, GRCBASE_EMAC0, - ext_phy_addr, - EXT_PHY_KR_PCS_DEVAD, - EXT_PHY_KR_LASI_STATUS, &val1); - DP(NETIF_MSG_LINK, "KR LASI status 0x%x->0x%x\n", - val2, val1); - /* Check the LASI */ - bnx2x_mdio45_ctrl_read(bp, GRCBASE_EMAC0, - ext_phy_addr, - EXT_PHY_KR_PMA_PMD_DEVAD, - 0x9003, &val2); - bnx2x_mdio45_ctrl_read(bp, GRCBASE_EMAC0, - ext_phy_addr, - EXT_PHY_KR_PMA_PMD_DEVAD, - 0x9003, &val1); - DP(NETIF_MSG_LINK, "KR 0x9003 0x%x->0x%x\n", - val2, val1); - /* Check the link status */ - bnx2x_mdio45_ctrl_read(bp, GRCBASE_EMAC0, - ext_phy_addr, - EXT_PHY_KR_PCS_DEVAD, - EXT_PHY_KR_PCS_STATUS, &val2); - DP(NETIF_MSG_LINK, "KR PCS status 0x%x\n", val2); - /* Check the link status on 1.1.2 */ - bnx2x_mdio45_ctrl_read(bp, GRCBASE_EMAC0, - ext_phy_addr, - EXT_PHY_OPT_PMA_PMD_DEVAD, - EXT_PHY_KR_STATUS, &val2); - bnx2x_mdio45_ctrl_read(bp, GRCBASE_EMAC0, - ext_phy_addr, - EXT_PHY_OPT_PMA_PMD_DEVAD, - EXT_PHY_KR_STATUS, &val1); - DP(NETIF_MSG_LINK, - "KR PMA status 0x%x->0x%x\n", val2, val1); - val1 = ((val1 & 4) == 4); - /* If 1G was requested assume the link is up */ - if (!(bp->req_autoneg & AUTONEG_SPEED) && - (bp->req_line_speed == SPEED_1000)) - val1 = 1; - bnx2x_hw_unlock(bp, HW_LOCK_RESOURCE_8072_MDIO); - break; - - case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101: - bnx2x_mdio45_read(bp, ext_phy_addr, - EXT_PHY_OPT_PMA_PMD_DEVAD, - EXT_PHY_OPT_LASI_STATUS, &val2); - bnx2x_mdio45_read(bp, ext_phy_addr, - EXT_PHY_OPT_PMA_PMD_DEVAD, - EXT_PHY_OPT_LASI_STATUS, &val1); - DP(NETIF_MSG_LINK, - "10G-base-T LASI status 0x%x->0x%x\n", val2, val1); - bnx2x_mdio45_read(bp, ext_phy_addr, - EXT_PHY_OPT_PMA_PMD_DEVAD, - EXT_PHY_KR_STATUS, &val2); - bnx2x_mdio45_read(bp, ext_phy_addr, - EXT_PHY_OPT_PMA_PMD_DEVAD, - EXT_PHY_KR_STATUS, &val1); - DP(NETIF_MSG_LINK, - "10G-base-T PMA status 0x%x->0x%x\n", val2, val1); - val1 = ((val1 & 4) == 4); - /* if link is up - * print the AN outcome of the SFX7101 PHY - */ - if (val1) { - bnx2x_mdio45_read(bp, ext_phy_addr, - EXT_PHY_KR_AUTO_NEG_DEVAD, - 0x21, &val2); - DP(NETIF_MSG_LINK, - "SFX7101 AN status 0x%x->%s\n", val2, - (val2 & (1<<14)) ? "Master" : "Slave"); - } - break; - - default: - DP(NETIF_MSG_LINK, "BAD XGXS ext_phy_config 0x%x\n", - bp->ext_phy_config); - val1 = 0; - break; - } - - } else { /* SerDes */ - ext_phy_type = SERDES_EXT_PHY_TYPE(bp); - switch (ext_phy_type) { - case PORT_HW_CFG_SERDES_EXT_PHY_TYPE_DIRECT: - DP(NETIF_MSG_LINK, "SerDes Direct\n"); - val1 = 1; - break; - - case PORT_HW_CFG_SERDES_EXT_PHY_TYPE_BCM5482: - DP(NETIF_MSG_LINK, "SerDes 5482\n"); - val1 = 1; - break; - - default: - DP(NETIF_MSG_LINK, "BAD SerDes ext_phy_config 0x%x\n", - bp->ext_phy_config); - val1 = 0; - break; - } - } - - return val1; -} - -static void bnx2x_bmac_enable(struct bnx2x *bp, int is_lb) -{ - int port = bp->port; - u32 bmac_addr = port ? NIG_REG_INGRESS_BMAC1_MEM : - NIG_REG_INGRESS_BMAC0_MEM; - u32 wb_write[2]; - u32 val; - - DP(NETIF_MSG_LINK, "enabling BigMAC\n"); - /* reset and unreset the BigMac */ - REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_CLEAR, - (MISC_REGISTERS_RESET_REG_2_RST_BMAC0 << port)); - msleep(5); - REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_SET, - (MISC_REGISTERS_RESET_REG_2_RST_BMAC0 << port)); - - /* enable access for bmac registers */ - NIG_WR(NIG_REG_BMAC0_REGS_OUT_EN + port*4, 0x1); - - /* XGXS control */ - wb_write[0] = 0x3c; - wb_write[1] = 0; - REG_WR_DMAE(bp, bmac_addr + BIGMAC_REGISTER_BMAC_XGXS_CONTROL, - wb_write, 2); - - /* tx MAC SA */ - wb_write[0] = ((bp->dev->dev_addr[2] << 24) | - (bp->dev->dev_addr[3] << 16) | - (bp->dev->dev_addr[4] << 8) | - bp->dev->dev_addr[5]); - wb_write[1] = ((bp->dev->dev_addr[0] << 8) | - bp->dev->dev_addr[1]); - REG_WR_DMAE(bp, bmac_addr + BIGMAC_REGISTER_TX_SOURCE_ADDR, - wb_write, 2); - - /* tx control */ - val = 0xc0; - if (bp->flow_ctrl & FLOW_CTRL_TX) - val |= 0x800000; - wb_write[0] = val; - wb_write[1] = 0; - REG_WR_DMAE(bp, bmac_addr + BIGMAC_REGISTER_TX_CONTROL, wb_write, 2); - - /* set tx mtu */ - wb_write[0] = ETH_MAX_JUMBO_PACKET_SIZE + ETH_OVREHEAD; /* -CRC */ - wb_write[1] = 0; - REG_WR_DMAE(bp, bmac_addr + BIGMAC_REGISTER_TX_MAX_SIZE, wb_write, 2); - - /* mac control */ - val = 0x3; - if (is_lb) { - val |= 0x4; - DP(NETIF_MSG_LINK, "enable bmac loopback\n"); - } - wb_write[0] = val; - wb_write[1] = 0; - REG_WR_DMAE(bp, bmac_addr + BIGMAC_REGISTER_BMAC_CONTROL, - wb_write, 2); - - /* rx control set to don't strip crc */ - val = 0x14; - if (bp->flow_ctrl & FLOW_CTRL_RX) - val |= 0x20; - wb_write[0] = val; - wb_write[1] = 0; - REG_WR_DMAE(bp, bmac_addr + BIGMAC_REGISTER_RX_CONTROL, wb_write, 2); - - /* set rx mtu */ - wb_write[0] = ETH_MAX_JUMBO_PACKET_SIZE + ETH_OVREHEAD; - wb_write[1] = 0; - REG_WR_DMAE(bp, bmac_addr + BIGMAC_REGISTER_RX_MAX_SIZE, wb_write, 2); - - /* set cnt max size */ - wb_write[0] = ETH_MAX_JUMBO_PACKET_SIZE + ETH_OVREHEAD; /* -VLAN */ - wb_write[1] = 0; - REG_WR_DMAE(bp, bmac_addr + BIGMAC_REGISTER_CNT_MAX_SIZE, - wb_write, 2); - - /* configure safc */ - wb_write[0] = 0x1000200; - wb_write[1] = 0; - REG_WR_DMAE(bp, bmac_addr + BIGMAC_REGISTER_RX_LLFC_MSG_FLDS, - wb_write, 2); - - /* fix for emulation */ - if (CHIP_REV(bp) == CHIP_REV_EMUL) { - wb_write[0] = 0xf000; - wb_write[1] = 0; - REG_WR_DMAE(bp, - bmac_addr + BIGMAC_REGISTER_TX_PAUSE_THRESHOLD, - wb_write, 2); - } - - /* reset old bmac stats */ - memset(&bp->old_bmac, 0, sizeof(struct bmac_stats)); - - NIG_WR(NIG_REG_XCM0_OUT_EN + port*4, 0x0); - - /* select XGXS */ - NIG_WR(NIG_REG_XGXS_SERDES0_MODE_SEL + port*4, 0x1); - NIG_WR(NIG_REG_XGXS_LANE_SEL_P0 + port*4, 0x0); - - /* disable the NIG in/out to the emac */ - NIG_WR(NIG_REG_EMAC0_IN_EN + port*4, 0x0); - NIG_WR(NIG_REG_EMAC0_PAUSE_OUT_EN + port*4, 0x0); - NIG_WR(NIG_REG_EGRESS_EMAC0_OUT_EN + port*4, 0x0); - - /* enable the NIG in/out to the bmac */ - NIG_WR(NIG_REG_EGRESS_EMAC0_PORT + port*4, 0x0); - - NIG_WR(NIG_REG_BMAC0_IN_EN + port*4, 0x1); - val = 0; - if (bp->flow_ctrl & FLOW_CTRL_TX) - val = 1; - NIG_WR(NIG_REG_BMAC0_PAUSE_OUT_EN + port*4, val); - NIG_WR(NIG_REG_BMAC0_OUT_EN + port*4, 0x1); - - bp->phy_flags |= PHY_BMAC_FLAG; - - bp->stats_state = STATS_STATE_ENABLE; -} - -static void bnx2x_bmac_rx_disable(struct bnx2x *bp) -{ - int port = bp->port; - u32 bmac_addr = port ? NIG_REG_INGRESS_BMAC1_MEM : - NIG_REG_INGRESS_BMAC0_MEM; - u32 wb_write[2]; - - /* Only if the bmac is out of reset */ - if (REG_RD(bp, MISC_REG_RESET_REG_2) & - (MISC_REGISTERS_RESET_REG_2_RST_BMAC0 << port)) { - /* Clear Rx Enable bit in BMAC_CONTROL register */ -#ifdef BNX2X_DMAE_RD - bnx2x_read_dmae(bp, bmac_addr + - BIGMAC_REGISTER_BMAC_CONTROL, 2); - wb_write[0] = *bnx2x_sp(bp, wb_data[0]); - wb_write[1] = *bnx2x_sp(bp, wb_data[1]); -#else - wb_write[0] = REG_RD(bp, - bmac_addr + BIGMAC_REGISTER_BMAC_CONTROL); - wb_write[1] = REG_RD(bp, - bmac_addr + BIGMAC_REGISTER_BMAC_CONTROL + 4); -#endif - wb_write[0] &= ~BMAC_CONTROL_RX_ENABLE; - REG_WR_DMAE(bp, bmac_addr + BIGMAC_REGISTER_BMAC_CONTROL, - wb_write, 2); - msleep(1); - } -} - -static void bnx2x_emac_enable(struct bnx2x *bp) -{ - int port = bp->port; - u32 emac_base = port ? GRCBASE_EMAC1 : GRCBASE_EMAC0; - u32 val; - int timeout; - - DP(NETIF_MSG_LINK, "enabling EMAC\n"); - /* reset and unreset the emac core */ - REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_CLEAR, - (MISC_REGISTERS_RESET_REG_2_RST_EMAC0_HARD_CORE << port)); - msleep(5); - REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_SET, - (MISC_REGISTERS_RESET_REG_2_RST_EMAC0_HARD_CORE << port)); - - /* enable emac and not bmac */ - NIG_WR(NIG_REG_EGRESS_EMAC0_PORT + port*4, 1); - - /* for paladium */ - if (CHIP_REV(bp) == CHIP_REV_EMUL) { - /* Use lane 1 (of lanes 0-3) */ - NIG_WR(NIG_REG_XGXS_LANE_SEL_P0 + port*4, 1); - NIG_WR(NIG_REG_XGXS_SERDES0_MODE_SEL + port*4, 1); - } - /* for fpga */ - else if (CHIP_REV(bp) == CHIP_REV_FPGA) { - /* Use lane 1 (of lanes 0-3) */ - NIG_WR(NIG_REG_XGXS_LANE_SEL_P0 + port*4, 1); - NIG_WR(NIG_REG_XGXS_SERDES0_MODE_SEL + port*4, 0); - } - /* ASIC */ - else { - if (bp->phy_flags & PHY_XGXS_FLAG) { - DP(NETIF_MSG_LINK, "XGXS\n"); - /* select the master lanes (out of 0-3) */ - NIG_WR(NIG_REG_XGXS_LANE_SEL_P0 + port*4, - bp->ser_lane); - /* select XGXS */ - NIG_WR(NIG_REG_XGXS_SERDES0_MODE_SEL + port*4, 1); - - } else { /* SerDes */ - DP(NETIF_MSG_LINK, "SerDes\n"); - /* select SerDes */ - NIG_WR(NIG_REG_XGXS_SERDES0_MODE_SEL + port*4, 0); - } - } - - /* enable emac */ - NIG_WR(NIG_REG_NIG_EMAC0_EN + port*4, 1); - - /* init emac - use read-modify-write */ - /* self clear reset */ - val = REG_RD(bp, emac_base + EMAC_REG_EMAC_MODE); - EMAC_WR(EMAC_REG_EMAC_MODE, (val | EMAC_MODE_RESET)); - - timeout = 200; - while (val & EMAC_MODE_RESET) { - val = REG_RD(bp, emac_base + EMAC_REG_EMAC_MODE); - DP(NETIF_MSG_LINK, "EMAC reset reg is %u\n", val); - if (!timeout) { - BNX2X_ERR("EMAC timeout!\n"); - break; - } - timeout--; - } - - /* reset tx part */ - EMAC_WR(EMAC_REG_EMAC_TX_MODE, EMAC_TX_MODE_RESET); - - timeout = 200; - while (val & EMAC_TX_MODE_RESET) { - val = REG_RD(bp, emac_base + EMAC_REG_EMAC_TX_MODE); - DP(NETIF_MSG_LINK, "EMAC reset reg is %u\n", val); - if (!timeout) { - BNX2X_ERR("EMAC timeout!\n"); - break; - } - timeout--; - } - - if (CHIP_REV_IS_SLOW(bp)) { - /* config GMII mode */ - val = REG_RD(bp, emac_base + EMAC_REG_EMAC_MODE); - EMAC_WR(EMAC_REG_EMAC_MODE, (val | EMAC_MODE_PORT_GMII)); - - } else { /* ASIC */ - /* pause enable/disable */ - bnx2x_bits_dis(bp, emac_base + EMAC_REG_EMAC_RX_MODE, - EMAC_RX_MODE_FLOW_EN); - if (bp->flow_ctrl & FLOW_CTRL_RX) - bnx2x_bits_en(bp, emac_base + EMAC_REG_EMAC_RX_MODE, - EMAC_RX_MODE_FLOW_EN); - - bnx2x_bits_dis(bp, emac_base + EMAC_REG_EMAC_TX_MODE, - EMAC_TX_MODE_EXT_PAUSE_EN); - if (bp->flow_ctrl & FLOW_CTRL_TX) - bnx2x_bits_en(bp, emac_base + EMAC_REG_EMAC_TX_MODE, - EMAC_TX_MODE_EXT_PAUSE_EN); - } - - /* KEEP_VLAN_TAG, promiscuous */ - val = REG_RD(bp, emac_base + EMAC_REG_EMAC_RX_MODE); - val |= EMAC_RX_MODE_KEEP_VLAN_TAG | EMAC_RX_MODE_PROMISCUOUS; - EMAC_WR(EMAC_REG_EMAC_RX_MODE, val); - - /* identify magic packets */ - val = REG_RD(bp, emac_base + EMAC_REG_EMAC_MODE); - EMAC_WR(EMAC_REG_EMAC_MODE, (val | EMAC_MODE_MPKT)); - - /* enable emac for jumbo packets */ - EMAC_WR(EMAC_REG_EMAC_RX_MTU_SIZE, - (EMAC_RX_MTU_SIZE_JUMBO_ENA | - (ETH_MAX_JUMBO_PACKET_SIZE + ETH_OVREHEAD))); /* -VLAN */ - - /* strip CRC */ - NIG_WR(NIG_REG_NIG_INGRESS_EMAC0_NO_CRC + port*4, 0x1); - - val = ((bp->dev->dev_addr[0] << 8) | - bp->dev->dev_addr[1]); - EMAC_WR(EMAC_REG_EMAC_MAC_MATCH, val); - - val = ((bp->dev->dev_addr[2] << 24) | - (bp->dev->dev_addr[3] << 16) | - (bp->dev->dev_addr[4] << 8) | - bp->dev->dev_addr[5]); - EMAC_WR(EMAC_REG_EMAC_MAC_MATCH + 4, val); - - /* disable the NIG in/out to the bmac */ - NIG_WR(NIG_REG_BMAC0_IN_EN + port*4, 0x0); - NIG_WR(NIG_REG_BMAC0_PAUSE_OUT_EN + port*4, 0x0); - NIG_WR(NIG_REG_BMAC0_OUT_EN + port*4, 0x0); - - /* enable the NIG in/out to the emac */ - NIG_WR(NIG_REG_EMAC0_IN_EN + port*4, 0x1); - val = 0; - if (bp->flow_ctrl & FLOW_CTRL_TX) - val = 1; - NIG_WR(NIG_REG_EMAC0_PAUSE_OUT_EN + port*4, val); - NIG_WR(NIG_REG_EGRESS_EMAC0_OUT_EN + port*4, 0x1); - - if (CHIP_REV(bp) == CHIP_REV_FPGA) { - /* take the BigMac out of reset */ - REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_SET, - (MISC_REGISTERS_RESET_REG_2_RST_BMAC0 << port)); - - /* enable access for bmac registers */ - NIG_WR(NIG_REG_BMAC0_REGS_OUT_EN + port*4, 0x1); - } - - bp->phy_flags |= PHY_EMAC_FLAG; - - bp->stats_state = STATS_STATE_ENABLE; -} - -static void bnx2x_emac_program(struct bnx2x *bp) -{ - u16 mode = 0; - int port = bp->port; - - DP(NETIF_MSG_LINK, "setting link speed & duplex\n"); - bnx2x_bits_dis(bp, GRCBASE_EMAC0 + port*0x400 + EMAC_REG_EMAC_MODE, - (EMAC_MODE_25G_MODE | - EMAC_MODE_PORT_MII_10M | - EMAC_MODE_HALF_DUPLEX)); - switch (bp->line_speed) { - case SPEED_10: - mode |= EMAC_MODE_PORT_MII_10M; - break; - - case SPEED_100: - mode |= EMAC_MODE_PORT_MII; - break; - - case SPEED_1000: - mode |= EMAC_MODE_PORT_GMII; - break; - - case SPEED_2500: - mode |= (EMAC_MODE_25G_MODE | EMAC_MODE_PORT_GMII); - break; - - default: - /* 10G not valid for EMAC */ - BNX2X_ERR("Invalid line_speed 0x%x\n", bp->line_speed); - break; - } - - if (bp->duplex == DUPLEX_HALF) - mode |= EMAC_MODE_HALF_DUPLEX; - bnx2x_bits_en(bp, GRCBASE_EMAC0 + port*0x400 + EMAC_REG_EMAC_MODE, - mode); - - bnx2x_leds_set(bp, bp->line_speed); -} - -static void bnx2x_set_sgmii_tx_driver(struct bnx2x *bp) -{ - u32 lp_up2; - u32 tx_driver; - - /* read precomp */ - MDIO_SET_REG_BANK(bp, MDIO_REG_BANK_OVER_1G); - bnx2x_mdio22_read(bp, MDIO_OVER_1G_LP_UP2, &lp_up2); - - MDIO_SET_REG_BANK(bp, MDIO_REG_BANK_TX0); - bnx2x_mdio22_read(bp, MDIO_TX0_TX_DRIVER, &tx_driver); - - /* bits [10:7] at lp_up2, positioned at [15:12] */ - lp_up2 = (((lp_up2 & MDIO_OVER_1G_LP_UP2_PREEMPHASIS_MASK) >> - MDIO_OVER_1G_LP_UP2_PREEMPHASIS_SHIFT) << - MDIO_TX0_TX_DRIVER_PREEMPHASIS_SHIFT); - - if ((lp_up2 != 0) && - (lp_up2 != (tx_driver & MDIO_TX0_TX_DRIVER_PREEMPHASIS_MASK))) { - /* replace tx_driver bits [15:12] */ - tx_driver &= ~MDIO_TX0_TX_DRIVER_PREEMPHASIS_MASK; - tx_driver |= lp_up2; - bnx2x_mdio22_write(bp, MDIO_TX0_TX_DRIVER, tx_driver); - } -} - -static void bnx2x_pbf_update(struct bnx2x *bp) -{ - int port = bp->port; - u32 init_crd, crd; - u32 count = 1000; - u32 pause = 0; - - /* disable port */ - REG_WR(bp, PBF_REG_DISABLE_NEW_TASK_PROC_P0 + port*4, 0x1); - - /* wait for init credit */ - init_crd = REG_RD(bp, PBF_REG_P0_INIT_CRD + port*4); - crd = REG_RD(bp, PBF_REG_P0_CREDIT + port*8); - DP(NETIF_MSG_LINK, "init_crd 0x%x crd 0x%x\n", init_crd, crd); - - while ((init_crd != crd) && count) { - msleep(5); - - crd = REG_RD(bp, PBF_REG_P0_CREDIT + port*8); - count--; - } - crd = REG_RD(bp, PBF_REG_P0_CREDIT + port*8); - if (init_crd != crd) - BNX2X_ERR("BUG! init_crd 0x%x != crd 0x%x\n", init_crd, crd); - - if (bp->flow_ctrl & FLOW_CTRL_RX) - pause = 1; - REG_WR(bp, PBF_REG_P0_PAUSE_ENABLE + port*4, pause); - if (pause) { - /* update threshold */ - REG_WR(bp, PBF_REG_P0_ARB_THRSH + port*4, 0); - /* update init credit */ - init_crd = 778; /* (800-18-4) */ - - } else { - u32 thresh = (ETH_MAX_JUMBO_PACKET_SIZE + ETH_OVREHEAD)/16; - - /* update threshold */ - REG_WR(bp, PBF_REG_P0_ARB_THRSH + port*4, thresh); - /* update init credit */ - switch (bp->line_speed) { - case SPEED_10: - case SPEED_100: - case SPEED_1000: - init_crd = thresh + 55 - 22; - break; - - case SPEED_2500: - init_crd = thresh + 138 - 22; - break; - - case SPEED_10000: - init_crd = thresh + 553 - 22; - break; - - default: - BNX2X_ERR("Invalid line_speed 0x%x\n", - bp->line_speed); - break; - } - } - REG_WR(bp, PBF_REG_P0_INIT_CRD + port*4, init_crd); - DP(NETIF_MSG_LINK, "PBF updated to speed %d credit %d\n", - bp->line_speed, init_crd); - - /* probe the credit changes */ - REG_WR(bp, PBF_REG_INIT_P0 + port*4, 0x1); - msleep(5); - REG_WR(bp, PBF_REG_INIT_P0 + port*4, 0x0); - - /* enable port */ - REG_WR(bp, PBF_REG_DISABLE_NEW_TASK_PROC_P0 + port*4, 0x0); -} - -static void bnx2x_update_mng(struct bnx2x *bp) -{ - if (!nomcp) - SHMEM_WR(bp, port_mb[bp->port].link_status, - bp->link_status); -} - -static void bnx2x_link_report(struct bnx2x *bp) -{ - if (bp->link_up) { - netif_carrier_on(bp->dev); - printk(KERN_INFO PFX "%s NIC Link is Up, ", bp->dev->name); - - printk("%d Mbps ", bp->line_speed); - - if (bp->duplex == DUPLEX_FULL) - printk("full duplex"); - else - printk("half duplex"); - - if (bp->flow_ctrl) { - if (bp->flow_ctrl & FLOW_CTRL_RX) { - printk(", receive "); - if (bp->flow_ctrl & FLOW_CTRL_TX) - printk("& transmit "); - } else { - printk(", transmit "); - } - printk("flow control ON"); - } - printk("\n"); - - } else { /* link_down */ - netif_carrier_off(bp->dev); - printk(KERN_INFO PFX "%s NIC Link is Down\n", bp->dev->name); - } -} - -static void bnx2x_link_up(struct bnx2x *bp) -{ - int port = bp->port; - - /* PBF - link up */ - bnx2x_pbf_update(bp); - - /* disable drain */ - NIG_WR(NIG_REG_EGRESS_DRAIN0_MODE + port*4, 0); - - /* update shared memory */ - bnx2x_update_mng(bp); - - /* indicate link up */ - bnx2x_link_report(bp); -} - -static void bnx2x_link_down(struct bnx2x *bp) -{ - int port = bp->port; - - /* notify stats */ - if (bp->stats_state != STATS_STATE_DISABLE) { - bp->stats_state = STATS_STATE_STOP; - DP(BNX2X_MSG_STATS, "stats_state - STOP\n"); - } - - /* indicate no mac active */ - bp->phy_flags &= ~(PHY_BMAC_FLAG | PHY_EMAC_FLAG); - - /* update shared memory */ - bnx2x_update_mng(bp); - - /* activate nig drain */ - NIG_WR(NIG_REG_EGRESS_DRAIN0_MODE + port*4, 1); - - /* reset BigMac */ - bnx2x_bmac_rx_disable(bp); - REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_CLEAR, - (MISC_REGISTERS_RESET_REG_2_RST_BMAC0 << port)); - - /* indicate link down */ - bnx2x_link_report(bp); -} - -static void bnx2x_init_mac_stats(struct bnx2x *bp); - -/* This function is called upon link interrupt */ -static void bnx2x_link_update(struct bnx2x *bp) -{ - int port = bp->port; - int i; - u32 gp_status; - int link_10g; - - DP(NETIF_MSG_LINK, "port %x, %s, int_status 0x%x," - " int_mask 0x%x, saved_mask 0x%x, MI_INT %x, SERDES_LINK %x," - " 10G %x, XGXS_LINK %x\n", port, - (bp->phy_flags & PHY_XGXS_FLAG)? "XGXS":"SerDes", - REG_RD(bp, NIG_REG_STATUS_INTERRUPT_PORT0 + port*4), - REG_RD(bp, NIG_REG_MASK_INTERRUPT_PORT0 + port*4), bp->nig_mask, - REG_RD(bp, NIG_REG_EMAC0_STATUS_MISC_MI_INT + port*0x18), - REG_RD(bp, NIG_REG_SERDES0_STATUS_LINK_STATUS + port*0x3c), - REG_RD(bp, NIG_REG_XGXS0_STATUS_LINK10G + port*0x68), - REG_RD(bp, NIG_REG_XGXS0_STATUS_LINK_STATUS + port*0x68) - ); - - might_sleep(); - MDIO_SET_REG_BANK(bp, MDIO_REG_BANK_GP_STATUS); - /* avoid fast toggling */ - for (i = 0; i < 10; i++) { - msleep(10); - bnx2x_mdio22_read(bp, MDIO_GP_STATUS_TOP_AN_STATUS1, - &gp_status); - } - - bnx2x_link_settings_status(bp, gp_status); - - /* anything 10 and over uses the bmac */ - link_10g = ((bp->line_speed >= SPEED_10000) && - (bp->line_speed <= SPEED_16000)); - - bnx2x_link_int_ack(bp, link_10g); - - /* link is up only if both local phy and external phy are up */ - bp->link_up = (bp->phy_link_up && bnx2x_ext_phy_is_link_up(bp)); - if (bp->link_up) { - if (link_10g) { - bnx2x_bmac_enable(bp, 0); - bnx2x_leds_set(bp, SPEED_10000); - - } else { - bnx2x_emac_enable(bp); - bnx2x_emac_program(bp); - - /* AN complete? */ - if (gp_status & MDIO_AN_CL73_OR_37_COMPLETE) { - if (!(bp->phy_flags & PHY_SGMII_FLAG)) - bnx2x_set_sgmii_tx_driver(bp); - } - } - bnx2x_link_up(bp); - - } else { /* link down */ - bnx2x_leds_unset(bp); - bnx2x_link_down(bp); - } - - bnx2x_init_mac_stats(bp); -} - -/* - * Init service functions - */ - -static void bnx2x_set_aer_mmd(struct bnx2x *bp) -{ - u16 offset = (bp->phy_flags & PHY_XGXS_FLAG) ? - (bp->phy_addr + bp->ser_lane) : 0; - - MDIO_SET_REG_BANK(bp, MDIO_REG_BANK_AER_BLOCK); - bnx2x_mdio22_write(bp, MDIO_AER_BLOCK_AER_REG, 0x3800 + offset); -} - -static void bnx2x_set_master_ln(struct bnx2x *bp) -{ - u32 new_master_ln; - - /* set the master_ln for AN */ - MDIO_SET_REG_BANK(bp, MDIO_REG_BANK_XGXS_BLOCK2); - bnx2x_mdio22_read(bp, MDIO_XGXS_BLOCK2_TEST_MODE_LANE, - &new_master_ln); - bnx2x_mdio22_write(bp, MDIO_XGXS_BLOCK2_TEST_MODE_LANE, - (new_master_ln | bp->ser_lane)); -} - -static void bnx2x_reset_unicore(struct bnx2x *bp) -{ - u32 mii_control; - int i; - - MDIO_SET_REG_BANK(bp, MDIO_REG_BANK_COMBO_IEEE0); - bnx2x_mdio22_read(bp, MDIO_COMBO_IEEE0_MII_CONTROL, &mii_control); - /* reset the unicore */ - bnx2x_mdio22_write(bp, MDIO_COMBO_IEEE0_MII_CONTROL, - (mii_control | MDIO_COMBO_IEEO_MII_CONTROL_RESET)); - - /* wait for the reset to self clear */ - for (i = 0; i < MDIO_ACCESS_TIMEOUT; i++) { - udelay(5); - - /* the reset erased the previous bank value */ - MDIO_SET_REG_BANK(bp, MDIO_REG_BANK_COMBO_IEEE0); - bnx2x_mdio22_read(bp, MDIO_COMBO_IEEE0_MII_CONTROL, - &mii_control); - - if (!(mii_control & MDIO_COMBO_IEEO_MII_CONTROL_RESET)) { - udelay(5); - return; - } - } - - BNX2X_ERR("BUG! %s (0x%x) is still in reset!\n", - (bp->phy_flags & PHY_XGXS_FLAG)? "XGXS":"SerDes", - bp->phy_addr); -} - -static void bnx2x_set_swap_lanes(struct bnx2x *bp) -{ - /* Each two bits represents a lane number: - No swap is 0123 => 0x1b no need to enable the swap */ - - MDIO_SET_REG_BANK(bp, MDIO_REG_BANK_XGXS_BLOCK2); - if (bp->rx_lane_swap != 0x1b) { - bnx2x_mdio22_write(bp, MDIO_XGXS_BLOCK2_RX_LN_SWAP, - (bp->rx_lane_swap | - MDIO_XGXS_BLOCK2_RX_LN_SWAP_ENABLE | - MDIO_XGXS_BLOCK2_RX_LN_SWAP_FORCE_ENABLE)); - } else { - bnx2x_mdio22_write(bp, MDIO_XGXS_BLOCK2_RX_LN_SWAP, 0); - } - - if (bp->tx_lane_swap != 0x1b) { - bnx2x_mdio22_write(bp, MDIO_XGXS_BLOCK2_TX_LN_SWAP, - (bp->tx_lane_swap | - MDIO_XGXS_BLOCK2_TX_LN_SWAP_ENABLE)); - } else { - bnx2x_mdio22_write(bp, MDIO_XGXS_BLOCK2_TX_LN_SWAP, 0); - } -} - -static void bnx2x_set_parallel_detection(struct bnx2x *bp) -{ - u32 control2; - - MDIO_SET_REG_BANK(bp, MDIO_REG_BANK_SERDES_DIGITAL); - bnx2x_mdio22_read(bp, MDIO_SERDES_DIGITAL_A_1000X_CONTROL2, - &control2); - - if (bp->autoneg & AUTONEG_PARALLEL) { - control2 |= MDIO_SERDES_DIGITAL_A_1000X_CONTROL2_PRL_DT_EN; - } else { - control2 &= ~MDIO_SERDES_DIGITAL_A_1000X_CONTROL2_PRL_DT_EN; - } - bnx2x_mdio22_write(bp, MDIO_SERDES_DIGITAL_A_1000X_CONTROL2, - control2); - - if (bp->phy_flags & PHY_XGXS_FLAG) { - DP(NETIF_MSG_LINK, "XGXS\n"); - MDIO_SET_REG_BANK(bp, MDIO_REG_BANK_10G_PARALLEL_DETECT); - - bnx2x_mdio22_write(bp, - MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_LINK, - MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_LINK_CNT); - - bnx2x_mdio22_read(bp, - MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_CONTROL, - &control2); - - if (bp->autoneg & AUTONEG_PARALLEL) { - control2 |= - MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_CONTROL_PARDET10G_EN; - } else { - control2 &= - ~MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_CONTROL_PARDET10G_EN; - } - bnx2x_mdio22_write(bp, - MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_CONTROL, - control2); - - /* Disable parallel detection of HiG */ - MDIO_SET_REG_BANK(bp, MDIO_REG_BANK_XGXS_BLOCK2); - bnx2x_mdio22_write(bp, MDIO_XGXS_BLOCK2_UNICORE_MODE_10G, - MDIO_XGXS_BLOCK2_UNICORE_MODE_10G_CX4_XGXS | - MDIO_XGXS_BLOCK2_UNICORE_MODE_10G_HIGIG_XGXS); - } -} - -static void bnx2x_set_autoneg(struct bnx2x *bp) -{ - u32 reg_val; - - /* CL37 Autoneg */ - MDIO_SET_REG_BANK(bp, MDIO_REG_BANK_COMBO_IEEE0); - bnx2x_mdio22_read(bp, MDIO_COMBO_IEEE0_MII_CONTROL, ®_val); - if ((bp->req_autoneg & AUTONEG_SPEED) && - (bp->autoneg & AUTONEG_CL37)) { - /* CL37 Autoneg Enabled */ - reg_val |= MDIO_COMBO_IEEO_MII_CONTROL_AN_EN; - } else { - /* CL37 Autoneg Disabled */ - reg_val &= ~(MDIO_COMBO_IEEO_MII_CONTROL_AN_EN | - MDIO_COMBO_IEEO_MII_CONTROL_RESTART_AN); - } - bnx2x_mdio22_write(bp, MDIO_COMBO_IEEE0_MII_CONTROL, reg_val); - - /* Enable/Disable Autodetection */ - MDIO_SET_REG_BANK(bp, MDIO_REG_BANK_SERDES_DIGITAL); - bnx2x_mdio22_read(bp, MDIO_SERDES_DIGITAL_A_1000X_CONTROL1, ®_val); - reg_val &= ~MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_SIGNAL_DETECT_EN; - - if ((bp->req_autoneg & AUTONEG_SPEED) && - (bp->autoneg & AUTONEG_SGMII_FIBER_AUTODET)) { - reg_val |= MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_AUTODET; - } else { - reg_val &= ~MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_AUTODET; - } - bnx2x_mdio22_write(bp, MDIO_SERDES_DIGITAL_A_1000X_CONTROL1, reg_val); - - /* Enable TetonII and BAM autoneg */ - MDIO_SET_REG_BANK(bp, MDIO_REG_BANK_BAM_NEXT_PAGE); - bnx2x_mdio22_read(bp, MDIO_BAM_NEXT_PAGE_MP5_NEXT_PAGE_CTRL, - ®_val); - if ((bp->req_autoneg & AUTONEG_SPEED) && - (bp->autoneg & AUTONEG_CL37) && (bp->autoneg & AUTONEG_BAM)) { - /* Enable BAM aneg Mode and TetonII aneg Mode */ - reg_val |= (MDIO_BAM_NEXT_PAGE_MP5_NEXT_PAGE_CTRL_BAM_MODE | - MDIO_BAM_NEXT_PAGE_MP5_NEXT_PAGE_CTRL_TETON_AN); - } else { - /* TetonII and BAM Autoneg Disabled */ - reg_val &= ~(MDIO_BAM_NEXT_PAGE_MP5_NEXT_PAGE_CTRL_BAM_MODE | - MDIO_BAM_NEXT_PAGE_MP5_NEXT_PAGE_CTRL_TETON_AN); - } - bnx2x_mdio22_write(bp, MDIO_BAM_NEXT_PAGE_MP5_NEXT_PAGE_CTRL, - reg_val); - - /* Enable Clause 73 Aneg */ - if ((bp->req_autoneg & AUTONEG_SPEED) && - (bp->autoneg & AUTONEG_CL73)) { - /* Enable BAM Station Manager */ - MDIO_SET_REG_BANK(bp, MDIO_REG_BANK_CL73_USERB0); - bnx2x_mdio22_write(bp, MDIO_CL73_USERB0_CL73_BAM_CTRL1, - (MDIO_CL73_USERB0_CL73_BAM_CTRL1_BAM_EN | - MDIO_CL73_USERB0_CL73_BAM_CTRL1_BAM_STATION_MNGR_EN | - MDIO_CL73_USERB0_CL73_BAM_CTRL1_BAM_NP_AFTER_BP_EN)); - - /* Merge CL73 and CL37 aneg resolution */ - bnx2x_mdio22_read(bp, MDIO_CL73_USERB0_CL73_BAM_CTRL3, - ®_val); - bnx2x_mdio22_write(bp, MDIO_CL73_USERB0_CL73_BAM_CTRL3, - (reg_val | - MDIO_CL73_USERB0_CL73_BAM_CTRL3_USE_CL73_HCD_MR)); - - /* Set the CL73 AN speed */ - MDIO_SET_REG_BANK(bp, MDIO_REG_BANK_CL73_IEEEB1); - bnx2x_mdio22_read(bp, MDIO_CL73_IEEEB1_AN_ADV2, ®_val); - /* In the SerDes we support only the 1G. - In the XGXS we support the 10G KX4 - but we currently do not support the KR */ - if (bp->phy_flags & PHY_XGXS_FLAG) { - DP(NETIF_MSG_LINK, "XGXS\n"); - /* 10G KX4 */ - reg_val |= MDIO_CL73_IEEEB1_AN_ADV2_ADVR_10G_KX4; - } else { - DP(NETIF_MSG_LINK, "SerDes\n"); - /* 1000M KX */ - reg_val |= MDIO_CL73_IEEEB1_AN_ADV2_ADVR_1000M_KX; - } - bnx2x_mdio22_write(bp, MDIO_CL73_IEEEB1_AN_ADV2, reg_val); - - /* CL73 Autoneg Enabled */ - reg_val = MDIO_CL73_IEEEB0_CL73_AN_CONTROL_AN_EN; - } else { - /* CL73 Autoneg Disabled */ - reg_val = 0; - } - MDIO_SET_REG_BANK(bp, MDIO_REG_BANK_CL73_IEEEB0); - bnx2x_mdio22_write(bp, MDIO_CL73_IEEEB0_CL73_AN_CONTROL, reg_val); -} - -/* program SerDes, forced speed */ -static void bnx2x_program_serdes(struct bnx2x *bp) -{ - u32 reg_val; - - /* program duplex, disable autoneg */ - MDIO_SET_REG_BANK(bp, MDIO_REG_BANK_COMBO_IEEE0); - bnx2x_mdio22_read(bp, MDIO_COMBO_IEEE0_MII_CONTROL, ®_val); - reg_val &= ~(MDIO_COMBO_IEEO_MII_CONTROL_FULL_DUPLEX | - MDIO_COMBO_IEEO_MII_CONTROL_AN_EN); - if (bp->req_duplex == DUPLEX_FULL) - reg_val |= MDIO_COMBO_IEEO_MII_CONTROL_FULL_DUPLEX; - bnx2x_mdio22_write(bp, MDIO_COMBO_IEEE0_MII_CONTROL, reg_val); - - /* program speed - - needed only if the speed is greater than 1G (2.5G or 10G) */ - if (bp->req_line_speed > SPEED_1000) { - MDIO_SET_REG_BANK(bp, MDIO_REG_BANK_SERDES_DIGITAL); - bnx2x_mdio22_read(bp, MDIO_SERDES_DIGITAL_MISC1, ®_val); - /* clearing the speed value before setting the right speed */ - reg_val &= ~MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_MASK; - reg_val |= (MDIO_SERDES_DIGITAL_MISC1_REFCLK_SEL_156_25M | - MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_SEL); - if (bp->req_line_speed == SPEED_10000) - reg_val |= - MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_10G_CX4; - bnx2x_mdio22_write(bp, MDIO_SERDES_DIGITAL_MISC1, reg_val); - } -} - -static void bnx2x_set_brcm_cl37_advertisment(struct bnx2x *bp) -{ - u32 val = 0; - - /* configure the 48 bits for BAM AN */ - MDIO_SET_REG_BANK(bp, MDIO_REG_BANK_OVER_1G); - - /* set extended capabilities */ - if (bp->advertising & ADVERTISED_2500baseX_Full) - val |= MDIO_OVER_1G_UP1_2_5G; - if (bp->advertising & ADVERTISED_10000baseT_Full) - val |= MDIO_OVER_1G_UP1_10G; - bnx2x_mdio22_write(bp, MDIO_OVER_1G_UP1, val); - - bnx2x_mdio22_write(bp, MDIO_OVER_1G_UP3, 0); -} - -static void bnx2x_set_ieee_aneg_advertisment(struct bnx2x *bp) -{ - u32 an_adv; - - /* for AN, we are always publishing full duplex */ - an_adv = MDIO_COMBO_IEEE0_AUTO_NEG_ADV_FULL_DUPLEX; - - /* resolve pause mode and advertisement - * Please refer to Table 28B-3 of the 802.3ab-1999 spec */ - if (bp->req_autoneg & AUTONEG_FLOW_CTRL) { - switch (bp->req_flow_ctrl) { - case FLOW_CTRL_AUTO: - if (bp->dev->mtu <= 4500) { - an_adv |= - MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH; - bp->advertising |= (ADVERTISED_Pause | - ADVERTISED_Asym_Pause); - } else { - an_adv |= - MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC; - bp->advertising |= ADVERTISED_Asym_Pause; - } - break; - - case FLOW_CTRL_TX: - an_adv |= - MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC; - bp->advertising |= ADVERTISED_Asym_Pause; - break; - - case FLOW_CTRL_RX: - if (bp->dev->mtu <= 4500) { - an_adv |= - MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH; - bp->advertising |= (ADVERTISED_Pause | - ADVERTISED_Asym_Pause); - } else { - an_adv |= - MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_NONE; - bp->advertising &= ~(ADVERTISED_Pause | - ADVERTISED_Asym_Pause); - } - break; - - case FLOW_CTRL_BOTH: - if (bp->dev->mtu <= 4500) { - an_adv |= - MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH; - bp->advertising |= (ADVERTISED_Pause | - ADVERTISED_Asym_Pause); - } else { - an_adv |= - MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC; - bp->advertising |= ADVERTISED_Asym_Pause; - } - break; - - case FLOW_CTRL_NONE: - default: - an_adv |= MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_NONE; - bp->advertising &= ~(ADVERTISED_Pause | - ADVERTISED_Asym_Pause); - break; - } - } else { /* forced mode */ - switch (bp->req_flow_ctrl) { - case FLOW_CTRL_AUTO: - DP(NETIF_MSG_LINK, "req_flow_ctrl 0x%x while" - " req_autoneg 0x%x\n", - bp->req_flow_ctrl, bp->req_autoneg); - break; - - case FLOW_CTRL_TX: - an_adv |= - MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC; - bp->advertising |= ADVERTISED_Asym_Pause; - break; - - case FLOW_CTRL_RX: - case FLOW_CTRL_BOTH: - an_adv |= MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH; - bp->advertising |= (ADVERTISED_Pause | - ADVERTISED_Asym_Pause); - break; - - case FLOW_CTRL_NONE: - default: - an_adv |= MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_NONE; - bp->advertising &= ~(ADVERTISED_Pause | - ADVERTISED_Asym_Pause); - break; - } - } - - MDIO_SET_REG_BANK(bp, MDIO_REG_BANK_COMBO_IEEE0); - bnx2x_mdio22_write(bp, MDIO_COMBO_IEEE0_AUTO_NEG_ADV, an_adv); -} - -static void bnx2x_restart_autoneg(struct bnx2x *bp) -{ - if (bp->autoneg & AUTONEG_CL73) { - /* enable and restart clause 73 aneg */ - u32 an_ctrl; - - MDIO_SET_REG_BANK(bp, MDIO_REG_BANK_CL73_IEEEB0); - bnx2x_mdio22_read(bp, MDIO_CL73_IEEEB0_CL73_AN_CONTROL, - &an_ctrl); - bnx2x_mdio22_write(bp, MDIO_CL73_IEEEB0_CL73_AN_CONTROL, - (an_ctrl | - MDIO_CL73_IEEEB0_CL73_AN_CONTROL_AN_EN | - MDIO_CL73_IEEEB0_CL73_AN_CONTROL_RESTART_AN)); - - } else { - /* Enable and restart BAM/CL37 aneg */ - u32 mii_control; - - MDIO_SET_REG_BANK(bp, MDIO_REG_BANK_COMBO_IEEE0); - bnx2x_mdio22_read(bp, MDIO_COMBO_IEEE0_MII_CONTROL, - &mii_control); - bnx2x_mdio22_write(bp, MDIO_COMBO_IEEE0_MII_CONTROL, - (mii_control | - MDIO_COMBO_IEEO_MII_CONTROL_AN_EN | - MDIO_COMBO_IEEO_MII_CONTROL_RESTART_AN)); - } -} - -static void bnx2x_initialize_sgmii_process(struct bnx2x *bp) -{ - u32 control1; - - /* in SGMII mode, the unicore is always slave */ - MDIO_SET_REG_BANK(bp, MDIO_REG_BANK_SERDES_DIGITAL); - bnx2x_mdio22_read(bp, MDIO_SERDES_DIGITAL_A_1000X_CONTROL1, - &control1); - control1 |= MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_INVERT_SIGNAL_DETECT; - /* set sgmii mode (and not fiber) */ - control1 &= ~(MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_FIBER_MODE | - MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_AUTODET | - MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_MSTR_MODE); - bnx2x_mdio22_write(bp, MDIO_SERDES_DIGITAL_A_1000X_CONTROL1, - control1); - - /* if forced speed */ - if (!(bp->req_autoneg & AUTONEG_SPEED)) { - /* set speed, disable autoneg */ - u32 mii_control; - - MDIO_SET_REG_BANK(bp, MDIO_REG_BANK_COMBO_IEEE0); - bnx2x_mdio22_read(bp, MDIO_COMBO_IEEE0_MII_CONTROL, - &mii_control); - mii_control &= ~(MDIO_COMBO_IEEO_MII_CONTROL_AN_EN | - MDIO_COMBO_IEEO_MII_CONTROL_MAN_SGMII_SP_MASK | - MDIO_COMBO_IEEO_MII_CONTROL_FULL_DUPLEX); - - switch (bp->req_line_speed) { - case SPEED_100: - mii_control |= - MDIO_COMBO_IEEO_MII_CONTROL_MAN_SGMII_SP_100; - break; - case SPEED_1000: - mii_control |= - MDIO_COMBO_IEEO_MII_CONTROL_MAN_SGMII_SP_1000; - break; - case SPEED_10: - /* there is nothing to set for 10M */ - break; - default: - /* invalid speed for SGMII */ - DP(NETIF_MSG_LINK, "Invalid req_line_speed 0x%x\n", - bp->req_line_speed); - break; - } - - /* setting the full duplex */ - if (bp->req_duplex == DUPLEX_FULL) - mii_control |= - MDIO_COMBO_IEEO_MII_CONTROL_FULL_DUPLEX; - bnx2x_mdio22_write(bp, MDIO_COMBO_IEEE0_MII_CONTROL, - mii_control); - - } else { /* AN mode */ - /* enable and restart AN */ - bnx2x_restart_autoneg(bp); - } -} - -static void bnx2x_link_int_enable(struct bnx2x *bp) -{ - int port = bp->port; - u32 ext_phy_type; - u32 mask; - - /* setting the status to report on link up - for either XGXS or SerDes */ - bnx2x_bits_dis(bp, NIG_REG_STATUS_INTERRUPT_PORT0 + port*4, - (NIG_STATUS_XGXS0_LINK10G | - NIG_STATUS_XGXS0_LINK_STATUS | - NIG_STATUS_SERDES0_LINK_STATUS)); - - if (bp->phy_flags & PHY_XGXS_FLAG) { - mask = (NIG_MASK_XGXS0_LINK10G | - NIG_MASK_XGXS0_LINK_STATUS); - DP(NETIF_MSG_LINK, "enabled XGXS interrupt\n"); - ext_phy_type = XGXS_EXT_PHY_TYPE(bp); - if ((ext_phy_type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT) && - (ext_phy_type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_FAILURE) && - (ext_phy_type != - PORT_HW_CFG_XGXS_EXT_PHY_TYPE_NOT_CONN)) { - mask |= NIG_MASK_MI_INT; - DP(NETIF_MSG_LINK, "enabled external phy int\n"); - } - - } else { /* SerDes */ - mask = NIG_MASK_SERDES0_LINK_STATUS; - DP(NETIF_MSG_LINK, "enabled SerDes interrupt\n"); - ext_phy_type = SERDES_EXT_PHY_TYPE(bp); - if ((ext_phy_type != - PORT_HW_CFG_SERDES_EXT_PHY_TYPE_DIRECT) && - (ext_phy_type != - PORT_HW_CFG_SERDES_EXT_PHY_TYPE_NOT_CONN)) { - mask |= NIG_MASK_MI_INT; - DP(NETIF_MSG_LINK, "enabled external phy int\n"); - } - } - bnx2x_bits_en(bp, - NIG_REG_MASK_INTERRUPT_PORT0 + port*4, - mask); - DP(NETIF_MSG_LINK, "port %x, %s, int_status 0x%x," - " int_mask 0x%x, MI_INT %x, SERDES_LINK %x," - " 10G %x, XGXS_LINK %x\n", port, - (bp->phy_flags & PHY_XGXS_FLAG)? "XGXS":"SerDes", - REG_RD(bp, NIG_REG_STATUS_INTERRUPT_PORT0 + port*4), - REG_RD(bp, NIG_REG_MASK_INTERRUPT_PORT0 + port*4), - REG_RD(bp, NIG_REG_EMAC0_STATUS_MISC_MI_INT + port*0x18), - REG_RD(bp, NIG_REG_SERDES0_STATUS_LINK_STATUS + port*0x3c), - REG_RD(bp, NIG_REG_XGXS0_STATUS_LINK10G + port*0x68), - REG_RD(bp, NIG_REG_XGXS0_STATUS_LINK_STATUS + port*0x68) - ); -} - -static void bnx2x_bcm8072_external_rom_boot(struct bnx2x *bp) -{ - u32 ext_phy_addr = ((bp->ext_phy_config & - PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK) >> - PORT_HW_CFG_XGXS_EXT_PHY_ADDR_SHIFT); - u32 fw_ver1, fw_ver2; - - /* Need to wait 200ms after reset */ - msleep(200); - /* Boot port from external ROM - * Set ser_boot_ctl bit in the MISC_CTRL1 register - */ - bnx2x_mdio45_ctrl_write(bp, GRCBASE_EMAC0, ext_phy_addr, - EXT_PHY_KR_PMA_PMD_DEVAD, - EXT_PHY_KR_MISC_CTRL1, 0x0001); - - /* Reset internal microprocessor */ - bnx2x_mdio45_ctrl_write(bp, GRCBASE_EMAC0, ext_phy_addr, - EXT_PHY_KR_PMA_PMD_DEVAD, EXT_PHY_KR_GEN_CTRL, - EXT_PHY_KR_ROM_RESET_INTERNAL_MP); - /* set micro reset = 0 */ - bnx2x_mdio45_ctrl_write(bp, GRCBASE_EMAC0, ext_phy_addr, - EXT_PHY_KR_PMA_PMD_DEVAD, EXT_PHY_KR_GEN_CTRL, - EXT_PHY_KR_ROM_MICRO_RESET); - /* Reset internal microprocessor */ - bnx2x_mdio45_ctrl_write(bp, GRCBASE_EMAC0, ext_phy_addr, - EXT_PHY_KR_PMA_PMD_DEVAD, EXT_PHY_KR_GEN_CTRL, - EXT_PHY_KR_ROM_RESET_INTERNAL_MP); - /* wait for 100ms for code download via SPI port */ - msleep(100); - - /* Clear ser_boot_ctl bit */ - bnx2x_mdio45_ctrl_write(bp, GRCBASE_EMAC0, ext_phy_addr, - EXT_PHY_KR_PMA_PMD_DEVAD, - EXT_PHY_KR_MISC_CTRL1, 0x0000); - /* Wait 100ms */ - msleep(100); - - /* Print the PHY FW version */ - bnx2x_mdio45_ctrl_read(bp, GRCBASE_EMAC0, ext_phy_addr, - EXT_PHY_KR_PMA_PMD_DEVAD, - 0xca19, &fw_ver1); - bnx2x_mdio45_ctrl_read(bp, GRCBASE_EMAC0, ext_phy_addr, - EXT_PHY_KR_PMA_PMD_DEVAD, - 0xca1a, &fw_ver2); - DP(NETIF_MSG_LINK, - "8072 FW version 0x%x:0x%x\n", fw_ver1, fw_ver2); -} - -static void bnx2x_bcm8072_force_10G(struct bnx2x *bp) -{ - u32 ext_phy_addr = ((bp->ext_phy_config & - PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK) >> - PORT_HW_CFG_XGXS_EXT_PHY_ADDR_SHIFT); - - /* Force KR or KX */ - bnx2x_mdio45_ctrl_write(bp, GRCBASE_EMAC0, ext_phy_addr, - EXT_PHY_KR_PMA_PMD_DEVAD, EXT_PHY_KR_CTRL, - 0x2040); - bnx2x_mdio45_ctrl_write(bp, GRCBASE_EMAC0, ext_phy_addr, - EXT_PHY_KR_PMA_PMD_DEVAD, EXT_PHY_KR_CTRL2, - 0x000b); - bnx2x_mdio45_ctrl_write(bp, GRCBASE_EMAC0, ext_phy_addr, - EXT_PHY_KR_PMA_PMD_DEVAD, EXT_PHY_KR_PMD_CTRL, - 0x0000); - bnx2x_mdio45_ctrl_write(bp, GRCBASE_EMAC0, ext_phy_addr, - EXT_PHY_KR_AUTO_NEG_DEVAD, EXT_PHY_KR_CTRL, - 0x0000); -} - -static void bnx2x_ext_phy_init(struct bnx2x *bp) -{ - u32 ext_phy_type; - u32 ext_phy_addr; - u32 cnt; - u32 ctrl; - u32 val = 0; - - if (bp->phy_flags & PHY_XGXS_FLAG) { - ext_phy_addr = ((bp->ext_phy_config & - PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK) >> - PORT_HW_CFG_XGXS_EXT_PHY_ADDR_SHIFT); - - ext_phy_type = XGXS_EXT_PHY_TYPE(bp); - /* Make sure that the soft reset is off (expect for the 8072: - * due to the lock, it will be done inside the specific - * handling) - */ - if ((ext_phy_type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT) && - (ext_phy_type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_FAILURE) && - (ext_phy_type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_NOT_CONN) && - (ext_phy_type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8072)) { - /* Wait for soft reset to get cleared upto 1 sec */ - for (cnt = 0; cnt < 1000; cnt++) { - bnx2x_mdio45_read(bp, ext_phy_addr, - EXT_PHY_OPT_PMA_PMD_DEVAD, - EXT_PHY_OPT_CNTL, &ctrl); - if (!(ctrl & (1<<15))) - break; - msleep(1); - } - DP(NETIF_MSG_LINK, - "control reg 0x%x (after %d ms)\n", ctrl, cnt); - } - - switch (ext_phy_type) { - case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT: - DP(NETIF_MSG_LINK, "XGXS Direct\n"); - break; - - case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8705: - DP(NETIF_MSG_LINK, "XGXS 8705\n"); - - bnx2x_mdio45_vwrite(bp, ext_phy_addr, - EXT_PHY_OPT_PMA_PMD_DEVAD, - EXT_PHY_OPT_PMD_MISC_CNTL, - 0x8288); - bnx2x_mdio45_vwrite(bp, ext_phy_addr, - EXT_PHY_OPT_PMA_PMD_DEVAD, - EXT_PHY_OPT_PHY_IDENTIFIER, - 0x7fbf); - bnx2x_mdio45_vwrite(bp, ext_phy_addr, - EXT_PHY_OPT_PMA_PMD_DEVAD, - EXT_PHY_OPT_CMU_PLL_BYPASS, - 0x0100); - bnx2x_mdio45_vwrite(bp, ext_phy_addr, - EXT_PHY_OPT_WIS_DEVAD, - EXT_PHY_OPT_LASI_CNTL, 0x1); - break; - - case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8706: - DP(NETIF_MSG_LINK, "XGXS 8706\n"); - - if (!(bp->req_autoneg & AUTONEG_SPEED)) { - /* Force speed */ - if (bp->req_line_speed == SPEED_10000) { - DP(NETIF_MSG_LINK, - "XGXS 8706 force 10Gbps\n"); - bnx2x_mdio45_vwrite(bp, ext_phy_addr, - EXT_PHY_OPT_PMA_PMD_DEVAD, - EXT_PHY_OPT_PMD_DIGITAL_CNT, - 0x400); - } else { - /* Force 1Gbps */ - DP(NETIF_MSG_LINK, - "XGXS 8706 force 1Gbps\n"); - - bnx2x_mdio45_vwrite(bp, ext_phy_addr, - EXT_PHY_OPT_PMA_PMD_DEVAD, - EXT_PHY_OPT_CNTL, - 0x0040); - - bnx2x_mdio45_vwrite(bp, ext_phy_addr, - EXT_PHY_OPT_PMA_PMD_DEVAD, - EXT_PHY_OPT_CNTL2, - 0x000D); - } - - /* Enable LASI */ - bnx2x_mdio45_vwrite(bp, ext_phy_addr, - EXT_PHY_OPT_PMA_PMD_DEVAD, - EXT_PHY_OPT_LASI_CNTL, - 0x1); - } else { - /* AUTONEG */ - /* Allow CL37 through CL73 */ - DP(NETIF_MSG_LINK, "XGXS 8706 AutoNeg\n"); - bnx2x_mdio45_vwrite(bp, ext_phy_addr, - EXT_PHY_AUTO_NEG_DEVAD, - EXT_PHY_OPT_AN_CL37_CL73, - 0x040c); - - /* Enable Full-Duplex advertisment on CL37 */ - bnx2x_mdio45_vwrite(bp, ext_phy_addr, - EXT_PHY_AUTO_NEG_DEVAD, - EXT_PHY_OPT_AN_CL37_FD, - 0x0020); - /* Enable CL37 AN */ - bnx2x_mdio45_vwrite(bp, ext_phy_addr, - EXT_PHY_AUTO_NEG_DEVAD, - EXT_PHY_OPT_AN_CL37_AN, - 0x1000); - /* Advertise 10G/1G support */ - if (bp->advertising & - ADVERTISED_1000baseT_Full) - val = (1<<5); - if (bp->advertising & - ADVERTISED_10000baseT_Full) - val |= (1<<7); - - bnx2x_mdio45_vwrite(bp, ext_phy_addr, - EXT_PHY_AUTO_NEG_DEVAD, - EXT_PHY_OPT_AN_ADV, val); - /* Enable LASI */ - bnx2x_mdio45_vwrite(bp, ext_phy_addr, - EXT_PHY_OPT_PMA_PMD_DEVAD, - EXT_PHY_OPT_LASI_CNTL, - 0x1); - - /* Enable clause 73 AN */ - bnx2x_mdio45_write(bp, ext_phy_addr, - EXT_PHY_AUTO_NEG_DEVAD, - EXT_PHY_OPT_CNTL, - 0x1200); - } - break; - - case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8072: - bnx2x_hw_lock(bp, HW_LOCK_RESOURCE_8072_MDIO); - /* Wait for soft reset to get cleared upto 1 sec */ - for (cnt = 0; cnt < 1000; cnt++) { - bnx2x_mdio45_ctrl_read(bp, GRCBASE_EMAC0, - ext_phy_addr, - EXT_PHY_OPT_PMA_PMD_DEVAD, - EXT_PHY_OPT_CNTL, &ctrl); - if (!(ctrl & (1<<15))) - break; - msleep(1); - } - DP(NETIF_MSG_LINK, - "8072 control reg 0x%x (after %d ms)\n", - ctrl, cnt); - - bnx2x_bcm8072_external_rom_boot(bp); - DP(NETIF_MSG_LINK, "Finshed loading 8072 KR ROM\n"); - - /* enable LASI */ - bnx2x_mdio45_ctrl_write(bp, GRCBASE_EMAC0, - ext_phy_addr, - EXT_PHY_KR_PMA_PMD_DEVAD, - 0x9000, 0x0400); - bnx2x_mdio45_ctrl_write(bp, GRCBASE_EMAC0, - ext_phy_addr, - EXT_PHY_KR_PMA_PMD_DEVAD, - EXT_PHY_KR_LASI_CNTL, 0x0004); - - /* If this is forced speed, set to KR or KX - * (all other are not supported) - */ - if (!(bp->req_autoneg & AUTONEG_SPEED)) { - if (bp->req_line_speed == SPEED_10000) { - bnx2x_bcm8072_force_10G(bp); - DP(NETIF_MSG_LINK, - "Forced speed 10G on 8072\n"); - /* unlock */ - bnx2x_hw_unlock(bp, - HW_LOCK_RESOURCE_8072_MDIO); - break; - } else - val = (1<<5); - } else { - - /* Advertise 10G/1G support */ - if (bp->advertising & - ADVERTISED_1000baseT_Full) - val = (1<<5); - if (bp->advertising & - ADVERTISED_10000baseT_Full) - val |= (1<<7); - } - bnx2x_mdio45_ctrl_write(bp, GRCBASE_EMAC0, - ext_phy_addr, - EXT_PHY_KR_AUTO_NEG_DEVAD, - 0x11, val); - /* Add support for CL37 ( passive mode ) I */ - bnx2x_mdio45_ctrl_write(bp, GRCBASE_EMAC0, - ext_phy_addr, - EXT_PHY_KR_AUTO_NEG_DEVAD, - 0x8370, 0x040c); - /* Add support for CL37 ( passive mode ) II */ - bnx2x_mdio45_ctrl_write(bp, GRCBASE_EMAC0, - ext_phy_addr, - EXT_PHY_KR_AUTO_NEG_DEVAD, - 0xffe4, 0x20); - /* Add support for CL37 ( passive mode ) III */ - bnx2x_mdio45_ctrl_write(bp, GRCBASE_EMAC0, - ext_phy_addr, - EXT_PHY_KR_AUTO_NEG_DEVAD, - 0xffe0, 0x1000); - /* Restart autoneg */ - msleep(500); - bnx2x_mdio45_ctrl_write(bp, GRCBASE_EMAC0, - ext_phy_addr, - EXT_PHY_KR_AUTO_NEG_DEVAD, - EXT_PHY_KR_CTRL, 0x1200); - DP(NETIF_MSG_LINK, "8072 Autoneg Restart: " - "1G %ssupported 10G %ssupported\n", - (val & (1<<5)) ? "" : "not ", - (val & (1<<7)) ? "" : "not "); - - /* unlock */ - bnx2x_hw_unlock(bp, HW_LOCK_RESOURCE_8072_MDIO); - break; - - case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101: - DP(NETIF_MSG_LINK, - "Setting the SFX7101 LASI indication\n"); - bnx2x_mdio45_vwrite(bp, ext_phy_addr, - EXT_PHY_OPT_PMA_PMD_DEVAD, - EXT_PHY_OPT_LASI_CNTL, 0x1); - DP(NETIF_MSG_LINK, - "Setting the SFX7101 LED to blink on traffic\n"); - bnx2x_mdio45_vwrite(bp, ext_phy_addr, - EXT_PHY_OPT_PMA_PMD_DEVAD, - 0xC007, (1<<3)); - - /* read modify write pause advertizing */ - bnx2x_mdio45_read(bp, ext_phy_addr, - EXT_PHY_KR_AUTO_NEG_DEVAD, - EXT_PHY_KR_AUTO_NEG_ADVERT, &val); - val &= ~EXT_PHY_KR_AUTO_NEG_ADVERT_PAUSE_BOTH; - /* Please refer to Table 28B-3 of 802.3ab-1999 spec. */ - if (bp->advertising & ADVERTISED_Pause) - val |= EXT_PHY_KR_AUTO_NEG_ADVERT_PAUSE; - - if (bp->advertising & ADVERTISED_Asym_Pause) { - val |= - EXT_PHY_KR_AUTO_NEG_ADVERT_PAUSE_ASYMMETRIC; - } - DP(NETIF_MSG_LINK, "SFX7101 AN advertize 0x%x\n", val); - bnx2x_mdio45_vwrite(bp, ext_phy_addr, - EXT_PHY_KR_AUTO_NEG_DEVAD, - EXT_PHY_KR_AUTO_NEG_ADVERT, val); - /* Restart autoneg */ - bnx2x_mdio45_read(bp, ext_phy_addr, - EXT_PHY_KR_AUTO_NEG_DEVAD, - EXT_PHY_KR_CTRL, &val); - val |= 0x200; - bnx2x_mdio45_write(bp, ext_phy_addr, - EXT_PHY_KR_AUTO_NEG_DEVAD, - EXT_PHY_KR_CTRL, val); - break; - - default: - BNX2X_ERR("BAD XGXS ext_phy_config 0x%x\n", - bp->ext_phy_config); - break; - } - - } else { /* SerDes */ -/* ext_phy_addr = ((bp->ext_phy_config & - PORT_HW_CFG_SERDES_EXT_PHY_ADDR_MASK) >> - PORT_HW_CFG_SERDES_EXT_PHY_ADDR_SHIFT); -*/ - ext_phy_type = SERDES_EXT_PHY_TYPE(bp); - switch (ext_phy_type) { - case PORT_HW_CFG_SERDES_EXT_PHY_TYPE_DIRECT: - DP(NETIF_MSG_LINK, "SerDes Direct\n"); - break; - - case PORT_HW_CFG_SERDES_EXT_PHY_TYPE_BCM5482: - DP(NETIF_MSG_LINK, "SerDes 5482\n"); - break; - - default: - DP(NETIF_MSG_LINK, "BAD SerDes ext_phy_config 0x%x\n", - bp->ext_phy_config); - break; - } - } -} - -static void bnx2x_ext_phy_reset(struct bnx2x *bp) -{ - u32 ext_phy_type; - u32 ext_phy_addr = ((bp->ext_phy_config & - PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK) >> - PORT_HW_CFG_XGXS_EXT_PHY_ADDR_SHIFT); - u32 board = (bp->board & SHARED_HW_CFG_BOARD_TYPE_MASK); - - /* The PHY reset is controled by GPIO 1 - * Give it 1ms of reset pulse - */ - if ((board != SHARED_HW_CFG_BOARD_TYPE_BCM957710T1002G) && - (board != SHARED_HW_CFG_BOARD_TYPE_BCM957710T1003G)) { - bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_1, - MISC_REGISTERS_GPIO_OUTPUT_LOW); - msleep(1); - bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_1, - MISC_REGISTERS_GPIO_OUTPUT_HIGH); - } - - if (bp->phy_flags & PHY_XGXS_FLAG) { - ext_phy_type = XGXS_EXT_PHY_TYPE(bp); - switch (ext_phy_type) { - case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT: - DP(NETIF_MSG_LINK, "XGXS Direct\n"); - break; - - case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8705: - case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8706: - DP(NETIF_MSG_LINK, "XGXS 8705/8706\n"); - bnx2x_mdio45_write(bp, ext_phy_addr, - EXT_PHY_OPT_PMA_PMD_DEVAD, - EXT_PHY_OPT_CNTL, 0xa040); - break; - - case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8072: - DP(NETIF_MSG_LINK, "XGXS 8072\n"); - bnx2x_hw_lock(bp, HW_LOCK_RESOURCE_8072_MDIO); - bnx2x_mdio45_ctrl_write(bp, GRCBASE_EMAC0, - ext_phy_addr, - EXT_PHY_KR_PMA_PMD_DEVAD, - 0, 1<<15); - bnx2x_hw_unlock(bp, HW_LOCK_RESOURCE_8072_MDIO); - break; - - case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101: - DP(NETIF_MSG_LINK, "XGXS SFX7101\n"); - break; - - default: - DP(NETIF_MSG_LINK, "BAD XGXS ext_phy_config 0x%x\n", - bp->ext_phy_config); - break; - } - - } else { /* SerDes */ - ext_phy_type = SERDES_EXT_PHY_TYPE(bp); - switch (ext_phy_type) { - case PORT_HW_CFG_SERDES_EXT_PHY_TYPE_DIRECT: - DP(NETIF_MSG_LINK, "SerDes Direct\n"); - break; - - case PORT_HW_CFG_SERDES_EXT_PHY_TYPE_BCM5482: - DP(NETIF_MSG_LINK, "SerDes 5482\n"); - break; - - default: - DP(NETIF_MSG_LINK, "BAD SerDes ext_phy_config 0x%x\n", - bp->ext_phy_config); - break; - } - } -} - -static void bnx2x_link_initialize(struct bnx2x *bp) -{ - int port = bp->port; +/* end of fast path */ + - /* disable attentions */ - bnx2x_bits_dis(bp, NIG_REG_MASK_INTERRUPT_PORT0 + port*4, - (NIG_MASK_XGXS0_LINK_STATUS | - NIG_MASK_XGXS0_LINK10G | - NIG_MASK_SERDES0_LINK_STATUS | - NIG_MASK_MI_INT)); +/* Link */ - /* Activate the external PHY */ - bnx2x_ext_phy_reset(bp); +/* + * General service functions + */ - bnx2x_set_aer_mmd(bp); +static int bnx2x_hw_lock(struct bnx2x *bp, u32 resource) +{ + u32 lock_status; + u32 resource_bit = (1 << resource); + u8 port = bp->port; + int cnt; - if (bp->phy_flags & PHY_XGXS_FLAG) - bnx2x_set_master_ln(bp); + /* Validating that the resource is within range */ + if (resource > HW_LOCK_MAX_RESOURCE_VALUE) { + DP(NETIF_MSG_HW, + "resource(0x%x) > HW_LOCK_MAX_RESOURCE_VALUE(0x%x)\n", + resource, HW_LOCK_MAX_RESOURCE_VALUE); + return -EINVAL; + } - /* reset the SerDes and wait for reset bit return low */ - bnx2x_reset_unicore(bp); + /* Validating that the resource is not already taken */ + lock_status = REG_RD(bp, MISC_REG_DRIVER_CONTROL_1 + port*8); + if (lock_status & resource_bit) { + DP(NETIF_MSG_HW, "lock_status 0x%x resource_bit 0x%x\n", + lock_status, resource_bit); + return -EEXIST; + } - bnx2x_set_aer_mmd(bp); + /* Try for 1 second every 5ms */ + for (cnt = 0; cnt < 200; cnt++) { + /* Try to acquire the lock */ + REG_WR(bp, MISC_REG_DRIVER_CONTROL_1 + port*8 + 4, + resource_bit); + lock_status = REG_RD(bp, MISC_REG_DRIVER_CONTROL_1 + port*8); + if (lock_status & resource_bit) + return 0; - /* setting the masterLn_def again after the reset */ - if (bp->phy_flags & PHY_XGXS_FLAG) { - bnx2x_set_master_ln(bp); - bnx2x_set_swap_lanes(bp); + msleep(5); } + DP(NETIF_MSG_HW, "Timeout\n"); + return -EAGAIN; +} - /* Set Parallel Detect */ - if (bp->req_autoneg & AUTONEG_SPEED) - bnx2x_set_parallel_detection(bp); +static int bnx2x_hw_unlock(struct bnx2x *bp, u32 resource) +{ + u32 lock_status; + u32 resource_bit = (1 << resource); + u8 port = bp->port; - if (bp->phy_flags & PHY_XGXS_FLAG) { - if (bp->req_line_speed && - bp->req_line_speed < SPEED_1000) { - bp->phy_flags |= PHY_SGMII_FLAG; - } else { - bp->phy_flags &= ~PHY_SGMII_FLAG; - } + /* Validating that the resource is within range */ + if (resource > HW_LOCK_MAX_RESOURCE_VALUE) { + DP(NETIF_MSG_HW, + "resource(0x%x) > HW_LOCK_MAX_RESOURCE_VALUE(0x%x)\n", + resource, HW_LOCK_MAX_RESOURCE_VALUE); + return -EINVAL; + } + + /* Validating that the resource is currently taken */ + lock_status = REG_RD(bp, MISC_REG_DRIVER_CONTROL_1 + port*8); + if (!(lock_status & resource_bit)) { + DP(NETIF_MSG_HW, "lock_status 0x%x resource_bit 0x%x\n", + lock_status, resource_bit); + return -EFAULT; } - if (!(bp->phy_flags & PHY_SGMII_FLAG)) { - u16 bank, rx_eq; + REG_WR(bp, MISC_REG_DRIVER_CONTROL_1 + port*8, resource_bit); + return 0; +} + +/* HW Lock for shared dual port PHYs */ +static void bnx2x_phy_hw_lock(struct bnx2x *bp) +{ + u32 ext_phy_type = XGXS_EXT_PHY_TYPE(bp->link_params.ext_phy_config); - rx_eq = ((bp->serdes_config & - PORT_HW_CFG_SERDES_RX_DRV_EQUALIZER_MASK) >> - PORT_HW_CFG_SERDES_RX_DRV_EQUALIZER_SHIFT); + mutex_lock(&bp->phy_mutex); - DP(NETIF_MSG_LINK, "setting rx eq to %d\n", rx_eq); - for (bank = MDIO_REG_BANK_RX0; bank <= MDIO_REG_BANK_RX_ALL; - bank += (MDIO_REG_BANK_RX1 - MDIO_REG_BANK_RX0)) { - MDIO_SET_REG_BANK(bp, bank); - bnx2x_mdio22_write(bp, MDIO_RX0_RX_EQ_BOOST, - ((rx_eq & - MDIO_RX0_RX_EQ_BOOST_EQUALIZER_CTRL_MASK) | - MDIO_RX0_RX_EQ_BOOST_OFFSET_CTRL)); - } + if ((ext_phy_type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8072) || + (ext_phy_type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073)) + bnx2x_hw_lock(bp, HW_LOCK_RESOURCE_8072_MDIO); +} - /* forced speed requested? */ - if (!(bp->req_autoneg & AUTONEG_SPEED)) { - DP(NETIF_MSG_LINK, "not SGMII, no AN\n"); +static void bnx2x_phy_hw_unlock(struct bnx2x *bp) +{ + u32 ext_phy_type = XGXS_EXT_PHY_TYPE(bp->link_params.ext_phy_config); - /* disable autoneg */ - bnx2x_set_autoneg(bp); + if ((ext_phy_type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8072) || + (ext_phy_type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073)) + bnx2x_hw_unlock(bp, HW_LOCK_RESOURCE_8072_MDIO); - /* program speed and duplex */ - bnx2x_program_serdes(bp); + mutex_unlock(&bp->phy_mutex); +} - } else { /* AN_mode */ - DP(NETIF_MSG_LINK, "not SGMII, AN\n"); +int bnx2x_set_gpio(struct bnx2x *bp, int gpio_num, u32 mode) +{ + /* The GPIO should be swapped if swap register is set and active */ + int gpio_port = (REG_RD(bp, NIG_REG_PORT_SWAP) && + REG_RD(bp, NIG_REG_STRAP_OVERRIDE)) ^ bp->port; + int gpio_shift = gpio_num + + (gpio_port ? MISC_REGISTERS_GPIO_PORT_SHIFT : 0); + u32 gpio_mask = (1 << gpio_shift); + u32 gpio_reg; - /* AN enabled */ - bnx2x_set_brcm_cl37_advertisment(bp); + if (gpio_num > MISC_REGISTERS_GPIO_3) { + BNX2X_ERR("Invalid GPIO %d\n", gpio_num); + return -EINVAL; + } - /* program duplex & pause advertisement (for aneg) */ - bnx2x_set_ieee_aneg_advertisment(bp); + bnx2x_hw_lock(bp, HW_LOCK_RESOURCE_GPIO); + /* read GPIO and mask except the float bits */ + gpio_reg = (REG_RD(bp, MISC_REG_GPIO) & MISC_REGISTERS_GPIO_FLOAT); - /* enable autoneg */ - bnx2x_set_autoneg(bp); + switch (mode) { + case MISC_REGISTERS_GPIO_OUTPUT_LOW: + DP(NETIF_MSG_LINK, "Set GPIO %d (shift %d) -> output low\n", + gpio_num, gpio_shift); + /* clear FLOAT and set CLR */ + gpio_reg &= ~(gpio_mask << MISC_REGISTERS_GPIO_FLOAT_POS); + gpio_reg |= (gpio_mask << MISC_REGISTERS_GPIO_CLR_POS); + break; - /* enable and restart AN */ - bnx2x_restart_autoneg(bp); - } + case MISC_REGISTERS_GPIO_OUTPUT_HIGH: + DP(NETIF_MSG_LINK, "Set GPIO %d (shift %d) -> output high\n", + gpio_num, gpio_shift); + /* clear FLOAT and set SET */ + gpio_reg &= ~(gpio_mask << MISC_REGISTERS_GPIO_FLOAT_POS); + gpio_reg |= (gpio_mask << MISC_REGISTERS_GPIO_SET_POS); + break; - } else { /* SGMII mode */ - DP(NETIF_MSG_LINK, "SGMII\n"); + case MISC_REGISTERS_GPIO_INPUT_HI_Z : + DP(NETIF_MSG_LINK, "Set GPIO %d (shift %d) -> input\n", + gpio_num, gpio_shift); + /* set FLOAT */ + gpio_reg |= (gpio_mask << MISC_REGISTERS_GPIO_FLOAT_POS); + break; - bnx2x_initialize_sgmii_process(bp); + default: + break; } - /* init ext phy and enable link state int */ - bnx2x_ext_phy_init(bp); + REG_WR(bp, MISC_REG_GPIO, gpio_reg); + bnx2x_hw_unlock(bp, HW_LOCK_RESOURCE_GPIO); - /* enable the interrupt */ - bnx2x_link_int_enable(bp); + return 0; } -static void bnx2x_phy_deassert(struct bnx2x *bp) +static int bnx2x_set_spio(struct bnx2x *bp, int spio_num, u32 mode) { - int port = bp->port; - u32 val; - - if (bp->phy_flags & PHY_XGXS_FLAG) { - DP(NETIF_MSG_LINK, "XGXS\n"); - val = XGXS_RESET_BITS; + u32 spio_mask = (1 << spio_num); + u32 spio_reg; - } else { /* SerDes */ - DP(NETIF_MSG_LINK, "SerDes\n"); - val = SERDES_RESET_BITS; + if ((spio_num < MISC_REGISTERS_SPIO_4) || + (spio_num > MISC_REGISTERS_SPIO_7)) { + BNX2X_ERR("Invalid SPIO %d\n", spio_num); + return -EINVAL; } - val = val << (port*16); + bnx2x_hw_lock(bp, HW_LOCK_RESOURCE_SPIO); + /* read SPIO and mask except the float bits */ + spio_reg = (REG_RD(bp, MISC_REG_SPIO) & MISC_REGISTERS_SPIO_FLOAT); - /* reset and unreset the SerDes/XGXS */ - REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_3_CLEAR, val); - msleep(5); - REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_3_SET, val); -} + switch (mode) { + case MISC_REGISTERS_SPIO_OUTPUT_LOW : + DP(NETIF_MSG_LINK, "Set SPIO %d -> output low\n", spio_num); + /* clear FLOAT and set CLR */ + spio_reg &= ~(spio_mask << MISC_REGISTERS_SPIO_FLOAT_POS); + spio_reg |= (spio_mask << MISC_REGISTERS_SPIO_CLR_POS); + break; -static int bnx2x_phy_init(struct bnx2x *bp) -{ - DP(NETIF_MSG_LINK, "started\n"); - if (CHIP_REV(bp) == CHIP_REV_FPGA) { - bp->phy_flags |= PHY_EMAC_FLAG; - bp->link_up = 1; - bp->line_speed = SPEED_10000; - bp->duplex = DUPLEX_FULL; - NIG_WR(NIG_REG_EGRESS_DRAIN0_MODE + bp->port*4, 0); - bnx2x_emac_enable(bp); - bnx2x_link_report(bp); - return 0; + case MISC_REGISTERS_SPIO_OUTPUT_HIGH : + DP(NETIF_MSG_LINK, "Set SPIO %d -> output high\n", spio_num); + /* clear FLOAT and set SET */ + spio_reg &= ~(spio_mask << MISC_REGISTERS_SPIO_FLOAT_POS); + spio_reg |= (spio_mask << MISC_REGISTERS_SPIO_SET_POS); + break; - } else if (CHIP_REV(bp) == CHIP_REV_EMUL) { - bp->phy_flags |= PHY_BMAC_FLAG; - bp->link_up = 1; - bp->line_speed = SPEED_10000; - bp->duplex = DUPLEX_FULL; - NIG_WR(NIG_REG_EGRESS_DRAIN0_MODE + bp->port*4, 0); - bnx2x_bmac_enable(bp, 0); - bnx2x_link_report(bp); - return 0; + case MISC_REGISTERS_SPIO_INPUT_HI_Z: + DP(NETIF_MSG_LINK, "Set SPIO %d -> input\n", spio_num); + /* set FLOAT */ + spio_reg |= (spio_mask << MISC_REGISTERS_SPIO_FLOAT_POS); + break; - } else { - bnx2x_phy_deassert(bp); - bnx2x_link_initialize(bp); + default: + break; } + REG_WR(bp, MISC_REG_SPIO, spio_reg); + bnx2x_hw_unlock(bp, HW_LOCK_RESOURCE_SPIO); + return 0; } -static void bnx2x_link_reset(struct bnx2x *bp) +static void bnx2x_calc_fc_adv(struct bnx2x *bp) { - int port = bp->port; - u32 board = (bp->board & SHARED_HW_CFG_BOARD_TYPE_MASK); - - /* update shared memory */ - bp->link_status = 0; - bnx2x_update_mng(bp); - - /* disable attentions */ - bnx2x_bits_dis(bp, NIG_REG_MASK_INTERRUPT_PORT0 + port*4, - (NIG_MASK_XGXS0_LINK_STATUS | - NIG_MASK_XGXS0_LINK10G | - NIG_MASK_SERDES0_LINK_STATUS | - NIG_MASK_MI_INT)); - - /* activate nig drain */ - NIG_WR(NIG_REG_EGRESS_DRAIN0_MODE + port*4, 1); + switch (bp->link_vars.ieee_fc) { + case MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_NONE: + bp->advertising &= ~(ADVERTISED_Asym_Pause | + ADVERTISED_Pause); + break; + case MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH: + bp->advertising |= (ADVERTISED_Asym_Pause | + ADVERTISED_Pause); + break; + case MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC: + bp->advertising |= ADVERTISED_Asym_Pause; + break; + default: + bp->advertising &= ~(ADVERTISED_Asym_Pause | + ADVERTISED_Pause); + break; + } +} - /* disable nig egress interface */ - NIG_WR(NIG_REG_BMAC0_OUT_EN + port*4, 0); - NIG_WR(NIG_REG_EGRESS_EMAC0_OUT_EN + port*4, 0); +static void bnx2x_link_report(struct bnx2x *bp) +{ + if (bp->link_vars.link_up) { + if (bp->state == BNX2X_STATE_OPEN) + netif_carrier_on(bp->dev); + printk(KERN_INFO PFX "%s NIC Link is Up, ", bp->dev->name); - /* Stop BigMac rx */ - bnx2x_bmac_rx_disable(bp); + printk("%d Mbps ", bp->link_vars.line_speed); - /* disable emac */ - NIG_WR(NIG_REG_NIG_EMAC0_EN + port*4, 0); + if (bp->link_vars.duplex == DUPLEX_FULL) + printk("full duplex"); + else + printk("half duplex"); - msleep(10); + if (bp->link_vars.flow_ctrl != FLOW_CTRL_NONE) { + if (bp->link_vars.flow_ctrl & FLOW_CTRL_RX) { + printk(", receive "); + if (bp->link_vars.flow_ctrl & FLOW_CTRL_TX) + printk("& transmit "); + } else { + printk(", transmit "); + } + printk("flow control ON"); + } + printk("\n"); - /* The PHY reset is controled by GPIO 1 - * Hold it as output low - */ - if ((board != SHARED_HW_CFG_BOARD_TYPE_BCM957710T1002G) && - (board != SHARED_HW_CFG_BOARD_TYPE_BCM957710T1003G)) { - bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_1, - MISC_REGISTERS_GPIO_OUTPUT_LOW); - DP(NETIF_MSG_LINK, "reset external PHY\n"); + } else { /* link_down */ + netif_carrier_off(bp->dev); + printk(KERN_ERR PFX "%s NIC Link is Down\n", bp->dev->name); } +} + +static u8 bnx2x_initial_phy_init(struct bnx2x *bp) +{ + u8 rc; - /* reset the SerDes/XGXS */ - REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_3_CLEAR, - (0x1ff << (port*16))); + /* Initialize link parameters structure variables */ + bp->link_params.mtu = bp->dev->mtu; - /* reset BigMac */ - REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_CLEAR, - (MISC_REGISTERS_RESET_REG_2_RST_BMAC0 << port)); + bnx2x_phy_hw_lock(bp); + rc = bnx2x_phy_init(&bp->link_params, &bp->link_vars); + bnx2x_phy_hw_unlock(bp); - /* disable nig ingress interface */ - NIG_WR(NIG_REG_BMAC0_IN_EN + port*4, 0); - NIG_WR(NIG_REG_EMAC0_IN_EN + port*4, 0); + if (bp->link_vars.link_up) + bnx2x_link_report(bp); - /* set link down */ - bp->link_up = 0; + bnx2x_calc_fc_adv(bp); + return rc; } -#ifdef BNX2X_XGXS_LB -static void bnx2x_set_xgxs_loopback(struct bnx2x *bp, int is_10g) +static void bnx2x_link_set(struct bnx2x *bp) { - int port = bp->port; + bnx2x_phy_hw_lock(bp); + bnx2x_phy_init(&bp->link_params, &bp->link_vars); + bnx2x_phy_hw_unlock(bp); - if (is_10g) { - u32 md_devad; + bnx2x_calc_fc_adv(bp); +} - DP(NETIF_MSG_LINK, "XGXS 10G loopback enable\n"); +static void bnx2x__link_reset(struct bnx2x *bp) +{ + bnx2x_phy_hw_lock(bp); + bnx2x_link_reset(&bp->link_params, &bp->link_vars); + bnx2x_phy_hw_unlock(bp); +} - /* change the uni_phy_addr in the nig */ - REG_RD(bp, (NIG_REG_XGXS0_CTRL_MD_DEVAD + port*0x18), - &md_devad); - NIG_WR(NIG_REG_XGXS0_CTRL_MD_DEVAD + port*0x18, 0x5); +static u8 bnx2x_link_test(struct bnx2x *bp) +{ + u8 rc; - /* change the aer mmd */ - MDIO_SET_REG_BANK(bp, MDIO_REG_BANK_AER_BLOCK); - bnx2x_mdio22_write(bp, MDIO_AER_BLOCK_AER_REG, 0x2800); + bnx2x_phy_hw_lock(bp); + rc = bnx2x_test_link(&bp->link_params, &bp->link_vars); + bnx2x_phy_hw_unlock(bp); - /* config combo IEEE0 control reg for loopback */ - MDIO_SET_REG_BANK(bp, MDIO_REG_BANK_CL73_IEEEB0); - bnx2x_mdio22_write(bp, MDIO_CL73_IEEEB0_CL73_AN_CONTROL, - 0x6041); + return rc; +} - /* set aer mmd back */ - bnx2x_set_aer_mmd(bp); +/* This function is called upon link interrupt */ +static void bnx2x_link_attn(struct bnx2x *bp) +{ + bnx2x_phy_hw_lock(bp); + bnx2x_link_update(&bp->link_params, &bp->link_vars); + bnx2x_phy_hw_unlock(bp); - /* and md_devad */ - NIG_WR(NIG_REG_XGXS0_CTRL_MD_DEVAD + port*0x18, md_devad); + /* indicate link status */ + bnx2x_link_report(bp); +} - } else { - u32 mii_control; +static void bnx2x__link_status_update(struct bnx2x *bp) +{ + if (bp->state != BNX2X_STATE_OPEN) + return; - DP(NETIF_MSG_LINK, "XGXS 1G loopback enable\n"); + bnx2x_link_status_update(&bp->link_params, &bp->link_vars); - MDIO_SET_REG_BANK(bp, MDIO_REG_BANK_COMBO_IEEE0); - bnx2x_mdio22_read(bp, MDIO_COMBO_IEEE0_MII_CONTROL, - &mii_control); - bnx2x_mdio22_write(bp, MDIO_COMBO_IEEE0_MII_CONTROL, - (mii_control | - MDIO_COMBO_IEEO_MII_CONTROL_LOOPBACK)); - } + /* indicate link status */ + bnx2x_link_report(bp); } -#endif -/* end of PHY/MAC */ +/* end of Link */ /* slow path */ @@ -4113,7 +1611,7 @@ static void bnx2x_attn_int_asserted(struct bnx2x *bp, u32 asserted) bp->nig_mask = REG_RD(bp, nig_int_mask_addr); REG_WR(bp, nig_int_mask_addr, 0); - bnx2x_link_update(bp); + bnx2x_link_attn(bp); /* handle unicore attn? */ } @@ -4196,14 +1694,14 @@ static inline void bnx2x_attn_int_deasserted0(struct bnx2x *bp, u32 attn) bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_2, MISC_REGISTERS_GPIO_OUTPUT_LOW); /* mark the failure */ - bp->ext_phy_config &= + bp->link_params.ext_phy_config &= ~PORT_HW_CFG_XGXS_EXT_PHY_TYPE_MASK; - bp->ext_phy_config |= + bp->link_params.ext_phy_config |= PORT_HW_CFG_XGXS_EXT_PHY_TYPE_FAILURE; SHMEM_WR(bp, dev_info.port_hw_config[port]. external_phy_config, - bp->ext_phy_config); + bp->link_params.ext_phy_config); /* log the failure */ printk(KERN_ERR PFX "Fan Failure on Network" " Controller %s has caused the driver to" @@ -4580,7 +2078,7 @@ static void bnx2x_init_mac_stats(struct bnx2x *bp) #endif (port ? DMAE_CMD_PORT_1 : DMAE_CMD_PORT_0)); - if (bp->link_up) + if (bp->link_vars.link_up) opcode |= (DMAE_CMD_C_DST_GRC | DMAE_CMD_C_ENABLE); dmae = bnx2x_sp(bp, dmae[bp->executer_idx++]); @@ -4593,7 +2091,7 @@ static void bnx2x_init_mac_stats(struct bnx2x *bp) dmae->dst_addr_hi = 0; dmae->len = (offsetof(struct bnx2x_eth_stats, mac_stx_end) - sizeof(u32)) >> 2; - if (bp->link_up) { + if (bp->link_vars.link_up) { dmae->comp_addr_lo = dmae_reg_go_c[loader_idx] >> 2; dmae->comp_addr_hi = 0; dmae->comp_val = 1; @@ -4604,7 +2102,7 @@ static void bnx2x_init_mac_stats(struct bnx2x *bp) } } - if (!bp->link_up) { + if (!bp->link_vars.link_up) { /* no need to collect statistics in link down */ return; } @@ -4619,7 +2117,7 @@ static void bnx2x_init_mac_stats(struct bnx2x *bp) #endif (port ? DMAE_CMD_PORT_1 : DMAE_CMD_PORT_0)); - if (bp->phy_flags & PHY_BMAC_FLAG) { + if (bp->link_vars.mac_type == MAC_TYPE_BMAC) { mac_addr = (port ? NIG_REG_INGRESS_BMAC1_MEM : NIG_REG_INGRESS_BMAC0_MEM); @@ -4656,7 +2154,7 @@ static void bnx2x_init_mac_stats(struct bnx2x *bp) dmae->comp_addr_hi = 0; dmae->comp_val = 1; - } else if (bp->phy_flags & PHY_EMAC_FLAG) { + } else if (bp->link_vars.mac_type == MAC_TYPE_EMAC) { mac_addr = (port ? GRCBASE_EMAC1 : GRCBASE_EMAC0); @@ -5099,10 +2597,10 @@ static void bnx2x_update_stats(struct bnx2x *bp) if (!bnx2x_update_storm_stats(bp)) { - if (bp->phy_flags & PHY_BMAC_FLAG) { + if (bp->link_vars.mac_type == MAC_TYPE_BMAC) { bnx2x_update_bmac_stats(bp); - } else if (bp->phy_flags & PHY_EMAC_FLAG) { + } else if (bp->link_vars.mac_type == MAC_TYPE_EMAC) { bnx2x_update_emac_stats(bp); } else { /* unreached */ @@ -6568,7 +4066,7 @@ static int bnx2x_function_init(struct bnx2x *bp, int mode) break; } - bnx2x_link_reset(bp); + bnx2x__link_reset(bp); /* Reset PCIE errors for debug */ REG_WR(bp, 0x2114, 0xffffffff); @@ -7210,7 +4708,7 @@ static int bnx2x_nic_load(struct bnx2x *bp, int req_irq) bnx2x_set_mac_addr(bp); - bnx2x_phy_init(bp); + bnx2x_initial_phy_init(bp); /* Start fast path */ if (req_irq) { /* IRQ is only requested from bnx2x_open */ @@ -7435,7 +4933,7 @@ static int bnx2x_nic_unload(struct bnx2x *bp, int free_irq) } unload_error: - bnx2x_link_reset(bp); + bnx2x__link_reset(bp); if (!nomcp) reset_code = bnx2x_fw_command(bp, reset_code); @@ -7477,13 +4975,12 @@ static void bnx2x_link_settings_supported(struct bnx2x *bp, u32 switch_cfg) int port = bp->port; u32 ext_phy_type; - bp->phy_flags = 0; - switch (switch_cfg) { case SWITCH_CFG_1G: BNX2X_DEV_INFO("switch_cfg 0x%x (1G)\n", switch_cfg); - ext_phy_type = SERDES_EXT_PHY_TYPE(bp); + ext_phy_type = + SERDES_EXT_PHY_TYPE(bp->link_params.ext_phy_config); switch (ext_phy_type) { case PORT_HW_CFG_SERDES_EXT_PHY_TYPE_DIRECT: BNX2X_DEV_INFO("ext_phy_type 0x%x (Direct)\n", @@ -7505,8 +5002,6 @@ static void bnx2x_link_settings_supported(struct bnx2x *bp, u32 switch_cfg) BNX2X_DEV_INFO("ext_phy_type 0x%x (5482)\n", ext_phy_type); - bp->phy_flags |= PHY_SGMII_FLAG; - bp->supported |= (SUPPORTED_10baseT_Half | SUPPORTED_10baseT_Full | SUPPORTED_100baseT_Half | @@ -7521,7 +5016,7 @@ static void bnx2x_link_settings_supported(struct bnx2x *bp, u32 switch_cfg) default: BNX2X_ERR("NVRAM config error. " "BAD SerDes ext_phy_config 0x%x\n", - bp->ext_phy_config); + bp->link_params.ext_phy_config); return; } @@ -7533,9 +5028,8 @@ static void bnx2x_link_settings_supported(struct bnx2x *bp, u32 switch_cfg) case SWITCH_CFG_10G: BNX2X_DEV_INFO("switch_cfg 0x%x (10G)\n", switch_cfg); - bp->phy_flags |= PHY_XGXS_FLAG; - - ext_phy_type = XGXS_EXT_PHY_TYPE(bp); + ext_phy_type = + XGXS_EXT_PHY_TYPE(bp->link_params.ext_phy_config); switch (ext_phy_type) { case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT: BNX2X_DEV_INFO("ext_phy_type 0x%x (Direct)\n", @@ -7588,6 +5082,19 @@ static void bnx2x_link_settings_supported(struct bnx2x *bp, u32 switch_cfg) SUPPORTED_Asym_Pause); break; + case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073: + BNX2X_DEV_INFO("ext_phy_type 0x%x (8073)\n", + ext_phy_type); + + bp->supported |= (SUPPORTED_10000baseT_Full | + SUPPORTED_2500baseX_Full | + SUPPORTED_1000baseT_Full | + SUPPORTED_FIBRE | + SUPPORTED_Autoneg | + SUPPORTED_Pause | + SUPPORTED_Asym_Pause); + break; + case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101: BNX2X_DEV_INFO("ext_phy_type 0x%x (SFX7101)\n", ext_phy_type); @@ -7599,10 +5106,15 @@ static void bnx2x_link_settings_supported(struct bnx2x *bp, u32 switch_cfg) SUPPORTED_Asym_Pause); break; + case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_FAILURE: + BNX2X_ERR("XGXS PHY Failure detected 0x%x\n", + bp->link_params.ext_phy_config); + break; + default: BNX2X_ERR("NVRAM config error. " "BAD XGXS ext_phy_config 0x%x\n", - bp->ext_phy_config); + bp->link_params.ext_phy_config); return; } @@ -7610,17 +5122,6 @@ static void bnx2x_link_settings_supported(struct bnx2x *bp, u32 switch_cfg) port*0x18); BNX2X_DEV_INFO("phy_addr 0x%x\n", bp->phy_addr); - bp->ser_lane = ((bp->lane_config & - PORT_HW_CFG_LANE_SWAP_CFG_MASTER_MASK) >> - PORT_HW_CFG_LANE_SWAP_CFG_MASTER_SHIFT); - bp->rx_lane_swap = ((bp->lane_config & - PORT_HW_CFG_LANE_SWAP_CFG_RX_MASK) >> - PORT_HW_CFG_LANE_SWAP_CFG_RX_SHIFT); - bp->tx_lane_swap = ((bp->lane_config & - PORT_HW_CFG_LANE_SWAP_CFG_TX_MASK) >> - PORT_HW_CFG_LANE_SWAP_CFG_TX_SHIFT); - BNX2X_DEV_INFO("rx_lane_swap 0x%x tx_lane_swap 0x%x\n", - bp->rx_lane_swap, bp->tx_lane_swap); break; default: @@ -7628,32 +5129,36 @@ static void bnx2x_link_settings_supported(struct bnx2x *bp, u32 switch_cfg) bp->link_config); return; } + bp->link_params.phy_addr = bp->phy_addr; /* mask what we support according to speed_cap_mask */ - if (!(bp->speed_cap_mask & - PORT_HW_CFG_SPEED_CAPABILITY_D0_10M_HALF)) + if (!(bp->link_params.speed_cap_mask & + PORT_HW_CFG_SPEED_CAPABILITY_D0_10M_HALF)) bp->supported &= ~SUPPORTED_10baseT_Half; - if (!(bp->speed_cap_mask & - PORT_HW_CFG_SPEED_CAPABILITY_D0_10M_FULL)) + if (!(bp->link_params.speed_cap_mask & + PORT_HW_CFG_SPEED_CAPABILITY_D0_10M_FULL)) bp->supported &= ~SUPPORTED_10baseT_Full; - if (!(bp->speed_cap_mask & - PORT_HW_CFG_SPEED_CAPABILITY_D0_100M_HALF)) + if (!(bp->link_params.speed_cap_mask & + PORT_HW_CFG_SPEED_CAPABILITY_D0_100M_HALF)) bp->supported &= ~SUPPORTED_100baseT_Half; - if (!(bp->speed_cap_mask & - PORT_HW_CFG_SPEED_CAPABILITY_D0_100M_FULL)) + if (!(bp->link_params.speed_cap_mask & + PORT_HW_CFG_SPEED_CAPABILITY_D0_100M_FULL)) bp->supported &= ~SUPPORTED_100baseT_Full; - if (!(bp->speed_cap_mask & PORT_HW_CFG_SPEED_CAPABILITY_D0_1G)) + if (!(bp->link_params.speed_cap_mask & + PORT_HW_CFG_SPEED_CAPABILITY_D0_1G)) bp->supported &= ~(SUPPORTED_1000baseT_Half | SUPPORTED_1000baseT_Full); - if (!(bp->speed_cap_mask & PORT_HW_CFG_SPEED_CAPABILITY_D0_2_5G)) + if (!(bp->link_params.speed_cap_mask & + PORT_HW_CFG_SPEED_CAPABILITY_D0_2_5G)) bp->supported &= ~SUPPORTED_2500baseX_Full; - if (!(bp->speed_cap_mask & PORT_HW_CFG_SPEED_CAPABILITY_D0_10G)) + if (!(bp->link_params.speed_cap_mask & + PORT_HW_CFG_SPEED_CAPABILITY_D0_10G)) bp->supported &= ~SUPPORTED_10000baseT_Full; BNX2X_DEV_INFO("supported 0x%x\n", bp->supported); @@ -7661,20 +5166,23 @@ static void bnx2x_link_settings_supported(struct bnx2x *bp, u32 switch_cfg) static void bnx2x_link_settings_requested(struct bnx2x *bp) { - bp->req_autoneg = 0; - bp->req_duplex = DUPLEX_FULL; + bp->link_params.req_duplex = DUPLEX_FULL; switch (bp->link_config & PORT_FEATURE_LINK_SPEED_MASK) { case PORT_FEATURE_LINK_SPEED_AUTO: if (bp->supported & SUPPORTED_Autoneg) { - bp->req_autoneg |= AUTONEG_SPEED; - bp->req_line_speed = 0; + bp->link_params.req_line_speed = SPEED_AUTO_NEG; bp->advertising = bp->supported; } else { - if (XGXS_EXT_PHY_TYPE(bp) == - PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8705) { + u32 ext_phy_type = + XGXS_EXT_PHY_TYPE(bp->link_params.ext_phy_config); + + if ((ext_phy_type == + PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8705) || + (ext_phy_type == + PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8706)) { /* force 10G, no AN */ - bp->req_line_speed = SPEED_10000; + bp->link_params.req_line_speed = SPEED_10000; bp->advertising = (ADVERTISED_10000baseT_Full | ADVERTISED_FIBRE); @@ -7690,86 +5198,92 @@ static void bnx2x_link_settings_requested(struct bnx2x *bp) case PORT_FEATURE_LINK_SPEED_10M_FULL: if (bp->supported & SUPPORTED_10baseT_Full) { - bp->req_line_speed = SPEED_10; + bp->link_params.req_line_speed = SPEED_10; bp->advertising = (ADVERTISED_10baseT_Full | ADVERTISED_TP); } else { BNX2X_ERR("NVRAM config error. " "Invalid link_config 0x%x" " speed_cap_mask 0x%x\n", - bp->link_config, bp->speed_cap_mask); + bp->link_config, + bp->link_params.speed_cap_mask); return; } break; case PORT_FEATURE_LINK_SPEED_10M_HALF: if (bp->supported & SUPPORTED_10baseT_Half) { - bp->req_line_speed = SPEED_10; - bp->req_duplex = DUPLEX_HALF; + bp->link_params.req_line_speed = SPEED_10; + bp->link_params.req_duplex = DUPLEX_HALF; bp->advertising = (ADVERTISED_10baseT_Half | ADVERTISED_TP); } else { BNX2X_ERR("NVRAM config error. " "Invalid link_config 0x%x" " speed_cap_mask 0x%x\n", - bp->link_config, bp->speed_cap_mask); + bp->link_config, + bp->link_params.speed_cap_mask); return; } break; case PORT_FEATURE_LINK_SPEED_100M_FULL: if (bp->supported & SUPPORTED_100baseT_Full) { - bp->req_line_speed = SPEED_100; + bp->link_params.req_line_speed = SPEED_100; bp->advertising = (ADVERTISED_100baseT_Full | ADVERTISED_TP); } else { BNX2X_ERR("NVRAM config error. " "Invalid link_config 0x%x" " speed_cap_mask 0x%x\n", - bp->link_config, bp->speed_cap_mask); + bp->link_config, + bp->link_params.speed_cap_mask); return; } break; case PORT_FEATURE_LINK_SPEED_100M_HALF: if (bp->supported & SUPPORTED_100baseT_Half) { - bp->req_line_speed = SPEED_100; - bp->req_duplex = DUPLEX_HALF; + bp->link_params.req_line_speed = SPEED_100; + bp->link_params.req_duplex = DUPLEX_HALF; bp->advertising = (ADVERTISED_100baseT_Half | ADVERTISED_TP); } else { BNX2X_ERR("NVRAM config error. " "Invalid link_config 0x%x" " speed_cap_mask 0x%x\n", - bp->link_config, bp->speed_cap_mask); + bp->link_config, + bp->link_params.speed_cap_mask); return; } break; case PORT_FEATURE_LINK_SPEED_1G: if (bp->supported & SUPPORTED_1000baseT_Full) { - bp->req_line_speed = SPEED_1000; + bp->link_params.req_line_speed = SPEED_1000; bp->advertising = (ADVERTISED_1000baseT_Full | ADVERTISED_TP); } else { BNX2X_ERR("NVRAM config error. " "Invalid link_config 0x%x" " speed_cap_mask 0x%x\n", - bp->link_config, bp->speed_cap_mask); + bp->link_config, + bp->link_params.speed_cap_mask); return; } break; case PORT_FEATURE_LINK_SPEED_2_5G: if (bp->supported & SUPPORTED_2500baseX_Full) { - bp->req_line_speed = SPEED_2500; + bp->link_params.req_line_speed = SPEED_2500; bp->advertising = (ADVERTISED_2500baseX_Full | ADVERTISED_TP); } else { BNX2X_ERR("NVRAM config error. " "Invalid link_config 0x%x" " speed_cap_mask 0x%x\n", - bp->link_config, bp->speed_cap_mask); + bp->link_config, + bp->link_params.speed_cap_mask); return; } break; @@ -7778,14 +5292,15 @@ static void bnx2x_link_settings_requested(struct bnx2x *bp) case PORT_FEATURE_LINK_SPEED_10G_KX4: case PORT_FEATURE_LINK_SPEED_10G_KR: if (bp->supported & SUPPORTED_10000baseT_Full) { - bp->req_line_speed = SPEED_10000; + bp->link_params.req_line_speed = SPEED_10000; bp->advertising = (ADVERTISED_10000baseT_Full | ADVERTISED_FIBRE); } else { BNX2X_ERR("NVRAM config error. " "Invalid link_config 0x%x" " speed_cap_mask 0x%x\n", - bp->link_config, bp->speed_cap_mask); + bp->link_config, + bp->link_params.speed_cap_mask); return; } break; @@ -7794,30 +5309,28 @@ static void bnx2x_link_settings_requested(struct bnx2x *bp) BNX2X_ERR("NVRAM config error. " "BAD link speed link_config 0x%x\n", bp->link_config); - bp->req_autoneg |= AUTONEG_SPEED; - bp->req_line_speed = 0; + bp->link_params.req_line_speed = SPEED_AUTO_NEG; bp->advertising = bp->supported; break; } - BNX2X_DEV_INFO("req_line_speed %d req_duplex %d\n", - bp->req_line_speed, bp->req_duplex); - bp->req_flow_ctrl = (bp->link_config & + bp->link_params.req_flow_ctrl = (bp->link_config & PORT_FEATURE_FLOW_CONTROL_MASK); - if ((bp->req_flow_ctrl == FLOW_CTRL_AUTO) && - (bp->supported & SUPPORTED_Autoneg)) - bp->req_autoneg |= AUTONEG_FLOW_CTRL; + if ((bp->link_params.req_flow_ctrl == FLOW_CTRL_AUTO) && + (!bp->supported & SUPPORTED_Autoneg)) + bp->link_params.req_flow_ctrl = FLOW_CTRL_NONE; - BNX2X_DEV_INFO("req_autoneg 0x%x req_flow_ctrl 0x%x" + BNX2X_DEV_INFO("req_line_speed %d req_duplex %d req_flow_ctrl 0x%x" " advertising 0x%x\n", - bp->req_autoneg, bp->req_flow_ctrl, bp->advertising); + bp->link_params.req_line_speed, + bp->link_params.req_duplex, + bp->link_params.req_flow_ctrl, bp->advertising); } static void bnx2x_get_hwinfo(struct bnx2x *bp) { u32 val, val2, val3, val4, id; int port = bp->port; - u32 switch_cfg; bp->shmem_base = REG_RD(bp, MISC_REG_SHARED_MEM_ADDR); BNX2X_DEV_INFO("shmem offset is %x\n", bp->shmem_base); @@ -7835,6 +5348,8 @@ static void bnx2x_get_hwinfo(struct bnx2x *bp) bp->chip_id = id; BNX2X_DEV_INFO("chip ID is %x\n", id); + bp->link_params.bp = bp; + if (!bp->shmem_base || (bp->shmem_base != 0xAF900)) { BNX2X_DEV_INFO("MCP not active\n"); nomcp = 1; @@ -7851,35 +5366,32 @@ static void bnx2x_get_hwinfo(struct bnx2x *bp) bp->hw_config = SHMEM_RD(bp, dev_info.shared_hw_config.config); bp->board = SHMEM_RD(bp, dev_info.shared_hw_config.board); - bp->serdes_config = + bp->link_params.serdes_config = SHMEM_RD(bp, dev_info.port_hw_config[port].serdes_config); - bp->lane_config = + bp->link_params.lane_config = SHMEM_RD(bp, dev_info.port_hw_config[port].lane_config); - bp->ext_phy_config = + bp->link_params.ext_phy_config = SHMEM_RD(bp, dev_info.port_hw_config[port].external_phy_config); - bp->speed_cap_mask = + bp->link_params.speed_cap_mask = SHMEM_RD(bp, dev_info.port_hw_config[port].speed_capability_mask); bp->link_config = SHMEM_RD(bp, dev_info.port_feature_config[port].link_config); - BNX2X_DEV_INFO("hw_config (%08x) board (%08x) serdes_config (%08x)\n" - KERN_INFO " lane_config (%08x) ext_phy_config (%08x)\n" - KERN_INFO " speed_cap_mask (%08x) link_config (%08x)" - " fw_seq (%08x)\n", - bp->hw_config, bp->board, bp->serdes_config, - bp->lane_config, bp->ext_phy_config, - bp->speed_cap_mask, bp->link_config, bp->fw_seq); + BNX2X_DEV_INFO("serdes_config (%08x) lane_config (%08x)\n" + KERN_INFO " ext_phy_config (%08x) speed_cap_mask (%08x)" + " link_config (%08x)\n", + bp->link_params.serdes_config, + bp->link_params.lane_config, + bp->link_params.ext_phy_config, + bp->link_params.speed_cap_mask, + bp->link_config); - switch_cfg = (bp->link_config & PORT_FEATURE_CONNECTED_SWITCH_MASK); - bnx2x_link_settings_supported(bp, switch_cfg); - - bp->autoneg = (bp->hw_config & SHARED_HW_CFG_AN_ENABLE_MASK); - /* for now disable cl73 */ - bp->autoneg &= ~SHARED_HW_CFG_AN_ENABLE_CL73; - BNX2X_DEV_INFO("autoneg 0x%x\n", bp->autoneg); + bp->link_params.switch_cfg = (bp->link_config & + PORT_FEATURE_CONNECTED_SWITCH_MASK); + bnx2x_link_settings_supported(bp, bp->link_params.switch_cfg); bnx2x_link_settings_requested(bp); @@ -7891,8 +5403,9 @@ static void bnx2x_get_hwinfo(struct bnx2x *bp) bp->dev->dev_addr[3] = (u8)(val >> 16 & 0xff); bp->dev->dev_addr[4] = (u8)(val >> 8 & 0xff); bp->dev->dev_addr[5] = (u8)(val & 0xff); + memcpy(bp->link_params.mac_addr, bp->dev->dev_addr, ETH_ALEN); + memcpy(bp->dev->perm_addr, bp->dev->dev_addr, ETH_ALEN); - memcpy(bp->dev->perm_addr, bp->dev->dev_addr, 6); val = SHMEM_RD(bp, dev_info.shared_hw_config.part_num); @@ -7945,21 +5458,23 @@ static int bnx2x_get_settings(struct net_device *dev, struct ethtool_cmd *cmd) cmd->advertising = bp->advertising; if (netif_carrier_ok(dev)) { - cmd->speed = bp->line_speed; - cmd->duplex = bp->duplex; + cmd->speed = bp->link_vars.line_speed; + cmd->duplex = bp->link_vars.duplex; } else { - cmd->speed = bp->req_line_speed; - cmd->duplex = bp->req_duplex; + cmd->speed = bp->link_params.req_line_speed; + cmd->duplex = bp->link_params.req_duplex; } - if (bp->phy_flags & PHY_XGXS_FLAG) { - u32 ext_phy_type = XGXS_EXT_PHY_TYPE(bp); + if (bp->link_params.switch_cfg == SWITCH_CFG_10G) { + u32 ext_phy_type = + XGXS_EXT_PHY_TYPE(bp->link_params.ext_phy_config); switch (ext_phy_type) { case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT: case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8705: case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8706: case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8072: + case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073: cmd->port = PORT_FIBRE; break; @@ -7967,9 +5482,15 @@ static int bnx2x_get_settings(struct net_device *dev, struct ethtool_cmd *cmd) cmd->port = PORT_TP; break; + case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_FAILURE: + BNX2X_ERR("XGXS PHY Failure detected 0x%x\n", + bp->link_params.ext_phy_config); + break; + default: DP(NETIF_MSG_LINK, "BAD XGXS ext_phy_config 0x%x\n", - bp->ext_phy_config); + bp->link_params.ext_phy_config); + break; } } else cmd->port = PORT_TP; @@ -7977,7 +5498,7 @@ static int bnx2x_get_settings(struct net_device *dev, struct ethtool_cmd *cmd) cmd->phy_address = bp->phy_addr; cmd->transceiver = XCVR_INTERNAL; - if (bp->req_autoneg & AUTONEG_SPEED) + if (bp->link_params.req_line_speed == SPEED_AUTO_NEG) cmd->autoneg = AUTONEG_ENABLE; else cmd->autoneg = AUTONEG_DISABLE; @@ -8018,9 +5539,8 @@ static int bnx2x_set_settings(struct net_device *dev, struct ethtool_cmd *cmd) /* advertise the requested speed and duplex if supported */ cmd->advertising &= bp->supported; - bp->req_autoneg |= AUTONEG_SPEED; - bp->req_line_speed = 0; - bp->req_duplex = DUPLEX_FULL; + bp->link_params.req_line_speed = SPEED_AUTO_NEG; + bp->link_params.req_duplex = DUPLEX_FULL; bp->advertising |= (ADVERTISED_Autoneg | cmd->advertising); } else { /* forced speed */ @@ -8126,34 +5646,45 @@ static int bnx2x_set_settings(struct net_device *dev, struct ethtool_cmd *cmd) return -EINVAL; } - bp->req_autoneg &= ~AUTONEG_SPEED; - bp->req_line_speed = cmd->speed; - bp->req_duplex = cmd->duplex; + bp->link_params.req_line_speed = cmd->speed; + bp->link_params.req_duplex = cmd->duplex; bp->advertising = advertising; } - DP(NETIF_MSG_LINK, "req_autoneg 0x%x req_line_speed %d\n" + DP(NETIF_MSG_LINK, "req_line_speed %d\n" DP_LEVEL " req_duplex %d advertising 0x%x\n", - bp->req_autoneg, bp->req_line_speed, bp->req_duplex, + bp->link_params.req_line_speed, bp->link_params.req_duplex, bp->advertising); bnx2x_stop_stats(bp); - bnx2x_link_initialize(bp); + bnx2x_link_set(bp); return 0; } +#define PHY_FW_VER_LEN 10 + static void bnx2x_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info) { struct bnx2x *bp = netdev_priv(dev); + char phy_fw_ver[PHY_FW_VER_LEN]; strcpy(info->driver, DRV_MODULE_NAME); strcpy(info->version, DRV_MODULE_VERSION); - snprintf(info->fw_version, 32, "%d.%d.%d:%d (BC VER %x)", + + phy_fw_ver[0] = '\0'; + bnx2x_phy_hw_lock(bp); + bnx2x_get_ext_phy_fw_version(&bp->link_params, + (bp->state != BNX2X_STATE_CLOSED), + phy_fw_ver, PHY_FW_VER_LEN); + bnx2x_phy_hw_unlock(bp); + + snprintf(info->fw_version, 32, "%d.%d.%d:%d BC:%x%s%s", BCM_5710_FW_MAJOR_VERSION, BCM_5710_FW_MINOR_VERSION, - BCM_5710_FW_REVISION_VERSION, BCM_5710_FW_COMPILE_FLAGS, - bp->bc_ver); + BCM_5710_FW_REVISION_VERSION, + BCM_5710_FW_COMPILE_FLAGS, bp->bc_ver, + ((phy_fw_ver[0] != '\0')? " PHY:":""), phy_fw_ver); strcpy(info->bus_info, pci_name(bp->pdev)); info->n_stats = BNX2X_NUM_STATS; info->testinfo_len = BNX2X_NUM_TESTS; @@ -8221,7 +5752,7 @@ static int bnx2x_nway_reset(struct net_device *dev) } bnx2x_stop_stats(bp); - bnx2x_link_initialize(bp); + bnx2x_link_set(bp); return 0; } @@ -8605,7 +6136,22 @@ static int bnx2x_set_eeprom(struct net_device *dev, /* parameters already validated in ethtool_set_eeprom */ - rc = bnx2x_nvram_write(bp, eeprom->offset, eebuf, eeprom->len); + /* If the magic number is PHY (0x00504859) upgrade the PHY FW */ + if (eeprom->magic == 0x00504859) { + + bnx2x_phy_hw_lock(bp); + rc = bnx2x_flash_download(bp, bp->port, + bp->link_params.ext_phy_config, + (bp->state != BNX2X_STATE_CLOSED), + eebuf, eeprom->len); + rc |= bnx2x_link_reset(&bp->link_params, + &bp->link_vars); + rc |= bnx2x_phy_init(&bp->link_params, + &bp->link_vars); + bnx2x_phy_hw_unlock(bp); + + } else + rc = bnx2x_nvram_write(bp, eeprom->offset, eebuf, eeprom->len); return rc; } @@ -8691,10 +6237,13 @@ static void bnx2x_get_pauseparam(struct net_device *dev, { struct bnx2x *bp = netdev_priv(dev); - epause->autoneg = - ((bp->req_autoneg & AUTONEG_FLOW_CTRL) == AUTONEG_FLOW_CTRL); - epause->rx_pause = ((bp->flow_ctrl & FLOW_CTRL_RX) == FLOW_CTRL_RX); - epause->tx_pause = ((bp->flow_ctrl & FLOW_CTRL_TX) == FLOW_CTRL_TX); + epause->autoneg = (bp->link_params.req_flow_ctrl == FLOW_CTRL_AUTO) && + (bp->link_params.req_line_speed == SPEED_AUTO_NEG); + + epause->rx_pause = ((bp->link_vars.flow_ctrl & FLOW_CTRL_RX) == + FLOW_CTRL_RX); + epause->tx_pause = ((bp->link_vars.flow_ctrl & FLOW_CTRL_TX) == + FLOW_CTRL_TX); DP(NETIF_MSG_LINK, "ethtool_pauseparam: cmd %d\n" DP_LEVEL " autoneg %d rx_pause %d tx_pause %d\n", @@ -8710,32 +6259,31 @@ static int bnx2x_set_pauseparam(struct net_device *dev, DP_LEVEL " autoneg %d rx_pause %d tx_pause %d\n", epause->cmd, epause->autoneg, epause->rx_pause, epause->tx_pause); - if (epause->autoneg) { - if (!(bp->supported & SUPPORTED_Autoneg)) { - DP(NETIF_MSG_LINK, "Aotoneg not supported\n"); - return -EINVAL; - } - - bp->req_autoneg |= AUTONEG_FLOW_CTRL; - } else - bp->req_autoneg &= ~AUTONEG_FLOW_CTRL; - - bp->req_flow_ctrl = FLOW_CTRL_AUTO; + bp->link_params.req_flow_ctrl = FLOW_CTRL_AUTO; if (epause->rx_pause) - bp->req_flow_ctrl |= FLOW_CTRL_RX; + bp->link_params.req_flow_ctrl |= FLOW_CTRL_RX; + if (epause->tx_pause) - bp->req_flow_ctrl |= FLOW_CTRL_TX; + bp->link_params.req_flow_ctrl |= FLOW_CTRL_TX; + + if (bp->link_params.req_flow_ctrl == FLOW_CTRL_AUTO) + bp->link_params.req_flow_ctrl = FLOW_CTRL_NONE; - if (!(bp->req_autoneg & AUTONEG_FLOW_CTRL) && - (bp->req_flow_ctrl == FLOW_CTRL_AUTO)) - bp->req_flow_ctrl = FLOW_CTRL_NONE; + if (epause->autoneg) { + if (!(bp->supported & SUPPORTED_Autoneg)) { + DP(NETIF_MSG_LINK, "Autoneg not supported\n"); + return -EINVAL; + } - DP(NETIF_MSG_LINK, "req_autoneg 0x%x req_flow_ctrl 0x%x\n", - bp->req_autoneg, bp->req_flow_ctrl); + if (bp->link_params.req_line_speed == SPEED_AUTO_NEG) + bp->link_params.req_flow_ctrl = FLOW_CTRL_AUTO; + } + DP(NETIF_MSG_LINK, + "req_flow_ctrl 0x%x\n", bp->link_params.req_flow_ctrl); bnx2x_stop_stats(bp); - bnx2x_link_initialize(bp); + bnx2x_link_set(bp); return 0; } @@ -8943,18 +6491,25 @@ static int bnx2x_phys_id(struct net_device *dev, u32 data) data = 2; for (i = 0; i < (data * 2); i++) { - if ((i % 2) == 0) { - bnx2x_leds_set(bp, SPEED_1000); - } else { - bnx2x_leds_unset(bp); - } + if ((i % 2) == 0) + bnx2x_set_led(bp, bp->port, LED_MODE_OPER, SPEED_1000, + bp->link_params.hw_led_mode, + bp->link_params.chip_id); + else + bnx2x_set_led(bp, bp->port, LED_MODE_OFF, 0, + bp->link_params.hw_led_mode, + bp->link_params.chip_id); + msleep_interruptible(500); if (signal_pending(current)) break; } - if (bp->link_up) - bnx2x_leds_set(bp, bp->line_speed); + if (bp->link_vars.link_up) + bnx2x_set_led(bp, bp->port, LED_MODE_OPER, + bp->link_vars.line_speed, + bp->link_params.hw_led_mode, + bp->link_params.chip_id); return 0; } @@ -9470,7 +7025,7 @@ static int bnx2x_change_mac_addr(struct net_device *dev, void *p) return 0; } -/* Called with rtnl_lock */ +/* called with rtnl_lock */ static int bnx2x_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) { struct mii_ioctl_data *data = if_mii(ifr); @@ -9482,19 +7037,19 @@ static int bnx2x_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) data->phy_id = bp->phy_addr; /* fallthrough */ + case SIOCGMIIREG: { - u32 mii_regval; + u16 mii_regval; - spin_lock_bh(&bp->phy_lock); - if (bp->state == BNX2X_STATE_OPEN) { - err = bnx2x_mdio22_read(bp, data->reg_num & 0x1f, - &mii_regval); + if (!netif_running(dev)) + return -EAGAIN; - data->val_out = mii_regval; - } else { - err = -EAGAIN; - } - spin_unlock_bh(&bp->phy_lock); + mutex_lock(&bp->phy_mutex); + err = bnx2x_cl45_read(bp, bp->port, 0, bp->phy_addr, + DEFAULT_PHY_DEV_ADDR, + (data->reg_num & 0x1f), &mii_regval); + data->val_out = mii_regval; + mutex_unlock(&bp->phy_mutex); return err; } @@ -9502,14 +7057,14 @@ static int bnx2x_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) if (!capable(CAP_NET_ADMIN)) return -EPERM; - spin_lock_bh(&bp->phy_lock); - if (bp->state == BNX2X_STATE_OPEN) { - err = bnx2x_mdio22_write(bp, data->reg_num & 0x1f, - data->val_in); - } else { - err = -EAGAIN; - } - spin_unlock_bh(&bp->phy_lock); + if (!netif_running(dev)) + return -EAGAIN; + + mutex_lock(&bp->phy_mutex); + err = bnx2x_cl45_write(bp, bp->port, 0, bp->phy_addr, + DEFAULT_PHY_DEV_ADDR, + (data->reg_num & 0x1f), data->val_in); + mutex_unlock(&bp->phy_mutex); return err; default: @@ -9682,8 +7237,6 @@ static int __devinit bnx2x_init_board(struct pci_dev *pdev, bp->dev = dev; bp->pdev = pdev; - spin_lock_init(&bp->phy_lock); - INIT_WORK(&bp->reset_task, bnx2x_reset_task); INIT_WORK(&bp->sp_task, bnx2x_sp_task); diff --git a/drivers/net/bnx2x_reg.h b/drivers/net/bnx2x_reg.h index 5a1aa0b55044..8707c0d05d9a 100644 --- a/drivers/net/bnx2x_reg.h +++ b/drivers/net/bnx2x_reg.h @@ -72,6 +72,8 @@ #define CCM_REG_CCM_INT_MASK 0xd01e4 /* [R 11] Interrupt register #0 read */ #define CCM_REG_CCM_INT_STS 0xd01d8 +/* [R 27] Parity register #0 read */ +#define CCM_REG_CCM_PRTY_STS 0xd01e8 /* [RW 3] The size of AG context region 0 in REG-pairs. Designates the MS REG-pair number (e.g. if region 0 is 6 REG-pairs; the value should be 5). Is used to determine the number of the AG context REG-pairs written back; @@ -190,25 +192,20 @@ weight 8 (the most prioritised); 1 stands for weight 1(least prioritised); 2 stands for weight 2; tc. */ #define CCM_REG_PBF_WEIGHT 0xd00ac -/* [RW 6] The physical queue number of queue number 1 per port index. */ #define CCM_REG_PHYS_QNUM1_0 0xd0134 #define CCM_REG_PHYS_QNUM1_1 0xd0138 -/* [RW 6] The physical queue number of queue number 2 per port index. */ #define CCM_REG_PHYS_QNUM2_0 0xd013c #define CCM_REG_PHYS_QNUM2_1 0xd0140 -/* [RW 6] The physical queue number of queue number 3 per port index. */ #define CCM_REG_PHYS_QNUM3_0 0xd0144 -/* [RW 6] The physical queue number of queue number 0 with QOS equal 0 port - index 0. */ +#define CCM_REG_PHYS_QNUM3_1 0xd0148 #define CCM_REG_QOS_PHYS_QNUM0_0 0xd0114 #define CCM_REG_QOS_PHYS_QNUM0_1 0xd0118 -/* [RW 6] The physical queue number of queue number 0 with QOS equal 1 port - index 0. */ #define CCM_REG_QOS_PHYS_QNUM1_0 0xd011c #define CCM_REG_QOS_PHYS_QNUM1_1 0xd0120 -/* [RW 6] The physical queue number of queue number 0 with QOS equal 2 port - index 0. */ #define CCM_REG_QOS_PHYS_QNUM2_0 0xd0124 +#define CCM_REG_QOS_PHYS_QNUM2_1 0xd0128 +#define CCM_REG_QOS_PHYS_QNUM3_0 0xd012c +#define CCM_REG_QOS_PHYS_QNUM3_1 0xd0130 /* [RW 1] STORM - CM Interface enable. If 0 - the valid input is disregarded; acknowledge output is deasserted; all other signals are treated as usual; if 1 - normal activity. */ @@ -253,6 +250,7 @@ mechanism. The fields are: [5:0] - message length; [12:6] - message pointer; 18:13] - next pointer. */ #define CCM_REG_XX_DESCR_TABLE 0xd0300 +#define CCM_REG_XX_DESCR_TABLE_SIZE 36 /* [R 7] Used to read the value of XX protection Free counter. */ #define CCM_REG_XX_FREE 0xd0184 /* [RW 6] Initial value for the credit counter; responsible for fulfilling @@ -296,6 +294,8 @@ /* [WB 24] MATT ram access. each entry has the following format:{RegionLength[11:0]; egionOffset[11:0]} */ #define CDU_REG_MATT 0x101100 +/* [RW 1] when this bit is set the CDU operates in e1hmf mode */ +#define CDU_REG_MF_MODE 0x101050 /* [R 1] indication the initializing the activity counter by the hardware was done. */ #define CFC_REG_AC_INIT_DONE 0x104078 @@ -330,6 +330,9 @@ field allows changing the priorities of the weighted-round-robin arbiter which selects which CFC load client should be served next */ #define CFC_REG_LCREQ_WEIGHTS 0x104084 +/* [RW 16] Link List ram access; data = {prev_lcid; ext_lcid} */ +#define CFC_REG_LINK_LIST 0x104c00 +#define CFC_REG_LINK_LIST_SIZE 256 /* [R 1] indication the initializing the link list by the hardware was done. */ #define CFC_REG_LL_INIT_DONE 0x104074 /* [R 9] Number of allocated LCIDs which are at empty state */ @@ -342,6 +345,45 @@ #define CFC_REG_NUM_LCIDS_LEAVING 0x104018 /* [RW 8] The event id for aggregated interrupt 0 */ #define CSDM_REG_AGG_INT_EVENT_0 0xc2038 +#define CSDM_REG_AGG_INT_EVENT_1 0xc203c +#define CSDM_REG_AGG_INT_EVENT_10 0xc2060 +#define CSDM_REG_AGG_INT_EVENT_11 0xc2064 +#define CSDM_REG_AGG_INT_EVENT_12 0xc2068 +#define CSDM_REG_AGG_INT_EVENT_13 0xc206c +#define CSDM_REG_AGG_INT_EVENT_14 0xc2070 +#define CSDM_REG_AGG_INT_EVENT_15 0xc2074 +#define CSDM_REG_AGG_INT_EVENT_16 0xc2078 +#define CSDM_REG_AGG_INT_EVENT_17 0xc207c +#define CSDM_REG_AGG_INT_EVENT_18 0xc2080 +#define CSDM_REG_AGG_INT_EVENT_19 0xc2084 +#define CSDM_REG_AGG_INT_EVENT_2 0xc2040 +#define CSDM_REG_AGG_INT_EVENT_20 0xc2088 +#define CSDM_REG_AGG_INT_EVENT_21 0xc208c +#define CSDM_REG_AGG_INT_EVENT_22 0xc2090 +#define CSDM_REG_AGG_INT_EVENT_23 0xc2094 +#define CSDM_REG_AGG_INT_EVENT_24 0xc2098 +#define CSDM_REG_AGG_INT_EVENT_25 0xc209c +#define CSDM_REG_AGG_INT_EVENT_26 0xc20a0 +#define CSDM_REG_AGG_INT_EVENT_27 0xc20a4 +#define CSDM_REG_AGG_INT_EVENT_28 0xc20a8 +#define CSDM_REG_AGG_INT_EVENT_29 0xc20ac +#define CSDM_REG_AGG_INT_EVENT_3 0xc2044 +#define CSDM_REG_AGG_INT_EVENT_30 0xc20b0 +#define CSDM_REG_AGG_INT_EVENT_31 0xc20b4 +#define CSDM_REG_AGG_INT_EVENT_4 0xc2048 +/* [RW 1] The T bit for aggregated interrupt 0 */ +#define CSDM_REG_AGG_INT_T_0 0xc20b8 +#define CSDM_REG_AGG_INT_T_1 0xc20bc +#define CSDM_REG_AGG_INT_T_10 0xc20e0 +#define CSDM_REG_AGG_INT_T_11 0xc20e4 +#define CSDM_REG_AGG_INT_T_12 0xc20e8 +#define CSDM_REG_AGG_INT_T_13 0xc20ec +#define CSDM_REG_AGG_INT_T_14 0xc20f0 +#define CSDM_REG_AGG_INT_T_15 0xc20f4 +#define CSDM_REG_AGG_INT_T_16 0xc20f8 +#define CSDM_REG_AGG_INT_T_17 0xc20fc +#define CSDM_REG_AGG_INT_T_18 0xc2100 +#define CSDM_REG_AGG_INT_T_19 0xc2104 /* [RW 13] The start address in the internal RAM for the cfc_rsp lcid */ #define CSDM_REG_CFC_RSP_START_ADDR 0xc2008 /* [RW 16] The maximum value of the competion counter #0 */ @@ -358,6 +400,9 @@ /* [RW 32] Interrupt mask register #0 read/write */ #define CSDM_REG_CSDM_INT_MASK_0 0xc229c #define CSDM_REG_CSDM_INT_MASK_1 0xc22ac +/* [R 32] Interrupt register #0 read */ +#define CSDM_REG_CSDM_INT_STS_0 0xc2290 +#define CSDM_REG_CSDM_INT_STS_1 0xc22a0 /* [RW 11] Parity mask register #0 read/write */ #define CSDM_REG_CSDM_PRTY_MASK 0xc22bc /* [R 11] Parity register #0 read */ @@ -443,6 +488,9 @@ /* [RW 32] Interrupt mask register #0 read/write */ #define CSEM_REG_CSEM_INT_MASK_0 0x200110 #define CSEM_REG_CSEM_INT_MASK_1 0x200120 +/* [R 32] Interrupt register #0 read */ +#define CSEM_REG_CSEM_INT_STS_0 0x200104 +#define CSEM_REG_CSEM_INT_STS_1 0x200114 /* [RW 32] Parity mask register #0 read/write */ #define CSEM_REG_CSEM_PRTY_MASK_0 0x200130 #define CSEM_REG_CSEM_PRTY_MASK_1 0x200140 @@ -453,9 +501,8 @@ #define CSEM_REG_ENABLE_OUT 0x2000a8 /* [RW 32] This address space contains all registers and memories that are placed in SEM_FAST block. The SEM_FAST registers are described in - appendix B. In order to access the SEM_FAST registers the base address - CSEM_REGISTERS_FAST_MEMORY (Offset: 0x220000) should be added to each - SEM_FAST register offset. */ + appendix B. In order to access the sem_fast registers the base address + ~fast_memory.fast_memory should be added to eachsem_fast register offset. */ #define CSEM_REG_FAST_MEMORY 0x220000 /* [RW 1] Disables input messages from FIC0 May be updated during run_time by the microcode */ @@ -466,6 +513,7 @@ /* [RW 15] Interrupt table Read and write access to it is not possible in the middle of the work */ #define CSEM_REG_INT_TABLE 0x200400 +#define CSEM_REG_INT_TABLE_SIZE 256 /* [ST 24] Statistics register. The number of messages that entered through FIC0 */ #define CSEM_REG_MSG_NUM_FIC0 0x200000 @@ -630,6 +678,8 @@ #define DORQ_REG_AGG_CMD3 0x17006c /* [RW 28] UCM Header. */ #define DORQ_REG_CMHEAD_RX 0x170050 +/* [RW 32] Doorbell address for RBC doorbells (function 0). */ +#define DORQ_REG_DB_ADDR0 0x17008c /* [RW 5] Interrupt mask register #0 read/write */ #define DORQ_REG_DORQ_INT_MASK 0x170180 /* [R 5] Interrupt register #0 read */ @@ -690,75 +740,33 @@ #define HC_CONFIG_0_REG_SINGLE_ISR_EN_0 (0x1<<1) #define HC_REG_AGG_INT_0 0x108050 #define HC_REG_AGG_INT_1 0x108054 -/* [RW 16] attention bit and attention acknowledge bits status for port 0 - and 1 according to the following address map: addr 0 - attn_bit_0; addr 1 - - attn_ack_bit_0; addr 2 - attn_bit_1; addr 3 - attn_ack_bit_1; */ #define HC_REG_ATTN_BIT 0x108120 -/* [RW 16] attn bits status index for attn bit msg; addr 0 - function 0; - addr 1 - functin 1 */ #define HC_REG_ATTN_IDX 0x108100 -/* [RW 32] port 0 lower 32 bits address field for attn messag. */ #define HC_REG_ATTN_MSG0_ADDR_L 0x108018 -/* [RW 32] port 1 lower 32 bits address field for attn messag. */ #define HC_REG_ATTN_MSG1_ADDR_L 0x108020 -/* [RW 8] status block number for attn bit msg - function 0; */ #define HC_REG_ATTN_NUM_P0 0x108038 -/* [RW 8] status block number for attn bit msg - function 1 */ #define HC_REG_ATTN_NUM_P1 0x10803c #define HC_REG_CONFIG_0 0x108000 #define HC_REG_CONFIG_1 0x108004 +#define HC_REG_FUNC_NUM_P0 0x1080ac +#define HC_REG_FUNC_NUM_P1 0x1080b0 /* [RW 3] Parity mask register #0 read/write */ #define HC_REG_HC_PRTY_MASK 0x1080a0 /* [R 3] Parity register #0 read */ #define HC_REG_HC_PRTY_STS 0x108094 -/* [RW 17] status block interrupt mask; one in each bit means unmask; zerow - in each bit means mask; bit 0 - default SB; bit 1 - SB_0; bit 2 - SB_1... - bit 16- SB_15; addr 0 - port 0; addr 1 - port 1 */ #define HC_REG_INT_MASK 0x108108 -/* [RW 16] port 0 attn bit condition monitoring; each bit that is set will - lock a change fron 0 to 1 in the corresponding attention signals that - comes from the AEU */ #define HC_REG_LEADING_EDGE_0 0x108040 #define HC_REG_LEADING_EDGE_1 0x108048 -/* [RW 16] all producer and consumer of port 0 according to the following - addresses; U_prod: 0-15; C_prod: 16-31; U_cons: 32-47; C_cons:48-63; - Defoult_prod: U/C/X/T/Attn-64/65/66/67/68; Defoult_cons: - U/C/X/T/Attn-69/70/71/72/73 */ #define HC_REG_P0_PROD_CONS 0x108200 -/* [RW 16] all producer and consumer of port 1according to the following - addresses; U_prod: 0-15; C_prod: 16-31; U_cons: 32-47; C_cons:48-63; - Defoult_prod: U/C/X/T/Attn-64/65/66/67/68; Defoult_cons: - U/C/X/T/Attn-69/70/71/72/73 */ #define HC_REG_P1_PROD_CONS 0x108400 -/* [W 1] This register is write only and has 4 addresses as follow: 0 = - clear all PBA bits port 0; 1 = clear all pending interrupts request - port0; 2 = clear all PBA bits port 1; 3 = clear all pending interrupts - request port1; here is no meaning for the data in this register */ #define HC_REG_PBA_COMMAND 0x108140 #define HC_REG_PCI_CONFIG_0 0x108010 #define HC_REG_PCI_CONFIG_1 0x108014 -/* [RW 24] all counters acording to the following address: LSB: 0=read; 1= - read_clear; 0-71 = HW counters (the inside order is the same as the - interrupt table in the spec); 72-219 = SW counters 1 (stops after first - consumer upd) the inside order is: 72-103 - U_non_default_p0; 104-135 - C_non_defaul_p0; 36-145 U/C/X/T/Attn_default_p0; 146-177 - U_non_default_p1; 178-209 C_non_defaul_p1; 10-219 U/C/X/T/Attn_default_p1 - ; 220-367 = SW counters 2 (stops when prod=cons) the inside order is: - 220-251 - U_non_default_p0; 252-283 C_non_defaul_p0; 84-293 - U/C/X/T/Attn_default_p0; 294-325 U_non_default_p1; 326-357 - C_non_defaul_p1; 58-367 U/C/X/T/Attn_default_p1 ; 368-515 = mailbox - counters; (the inside order of the mailbox counter is 368-431 U and C - non_default_p0; 432-441 U/C/X/T/Attn_default_p0; 442-505 U and C - non_default_p1; 506-515 U/C/X/T/Attn_default_p1) */ #define HC_REG_STATISTIC_COUNTERS 0x109000 -/* [RW 16] port 0 attn bit condition monitoring; each bit that is set will - lock a change fron 1 to 0 in the corresponding attention signals that - comes from the AEU */ #define HC_REG_TRAILING_EDGE_0 0x108044 #define HC_REG_TRAILING_EDGE_1 0x10804c #define HC_REG_UC_RAM_ADDR_0 0x108028 #define HC_REG_UC_RAM_ADDR_1 0x108030 -/* [RW 16] ustorm address for coalesc now message */ #define HC_REG_USTORM_ADDR_FOR_COALESCE 0x108068 #define HC_REG_VQID_0 0x108008 #define HC_REG_VQID_1 0x10800c @@ -883,14 +891,16 @@ rom_parity; [29] MCP Latched ump_rx_parity; [30] MCP Latched ump_tx_parity; [31] MCP Latched scpad_parity; */ #define MISC_REG_AEU_AFTER_INVERT_4_MCP 0xa458 -/* [W 11] write to this register results with the clear of the latched +/* [W 14] write to this register results with the clear of the latched signals; one in d0 clears RBCR latch; one in d1 clears RBCT latch; one in d2 clears RBCN latch; one in d3 clears RBCU latch; one in d4 clears RBCP latch; one in d5 clears GRC Latched timeout attention; one in d6 clears GRC Latched reserved access attention; one in d7 clears Latched rom_parity; one in d8 clears Latched ump_rx_parity; one in d9 clears - Latched ump_tx_parity; one in d10 clears Latched scpad_parity; read from - this register return zero */ + Latched ump_tx_parity; one in d10 clears Latched scpad_parity (both + ports); one in d11 clears pxpv_misc_mps_attn; one in d12 clears + pxp_misc_exp_rom_attn0; one in d13 clears pxp_misc_exp_rom_attn1; read + from this register return zero */ #define MISC_REG_AEU_CLR_LATCH_SIGNAL 0xa45c /* [RW 32] first 32b for enabling the output for function 0 output0. mapped as follows: [0] NIG attention for function0; [1] NIG attention for @@ -907,7 +917,11 @@ TSEMI Hw interrupt; [30] PBF Parity error; [31] PBF Hw interrupt; */ #define MISC_REG_AEU_ENABLE1_FUNC_0_OUT_0 0xa06c #define MISC_REG_AEU_ENABLE1_FUNC_0_OUT_1 0xa07c +#define MISC_REG_AEU_ENABLE1_FUNC_0_OUT_2 0xa08c #define MISC_REG_AEU_ENABLE1_FUNC_0_OUT_3 0xa09c +#define MISC_REG_AEU_ENABLE1_FUNC_0_OUT_5 0xa0bc +#define MISC_REG_AEU_ENABLE1_FUNC_0_OUT_6 0xa0cc +#define MISC_REG_AEU_ENABLE1_FUNC_0_OUT_7 0xa0dc /* [RW 32] first 32b for enabling the output for function 1 output0. mapped as follows: [0] NIG attention for function0; [1] NIG attention for function1; [2] GPIO1 function 1; [3] GPIO2 function 1; [4] GPIO3 function @@ -923,9 +937,13 @@ TSEMI Hw interrupt; [30] PBF Parity error; [31] PBF Hw interrupt; */ #define MISC_REG_AEU_ENABLE1_FUNC_1_OUT_0 0xa10c #define MISC_REG_AEU_ENABLE1_FUNC_1_OUT_1 0xa11c +#define MISC_REG_AEU_ENABLE1_FUNC_1_OUT_2 0xa12c #define MISC_REG_AEU_ENABLE1_FUNC_1_OUT_3 0xa13c -/* [RW 32] first 32b for enabling the output for close the gate nig 0. - mapped as follows: [0] NIG attention for function0; [1] NIG attention for +#define MISC_REG_AEU_ENABLE1_FUNC_1_OUT_5 0xa15c +#define MISC_REG_AEU_ENABLE1_FUNC_1_OUT_6 0xa16c +#define MISC_REG_AEU_ENABLE1_FUNC_1_OUT_7 0xa17c +/* [RW 32] first 32b for enabling the output for close the gate nig. mapped + as follows: [0] NIG attention for function0; [1] NIG attention for function1; [2] GPIO1 function 0; [3] GPIO2 function 0; [4] GPIO3 function 0; [5] GPIO4 function 0; [6] GPIO1 function 1; [7] GPIO2 function 1; [8] GPIO3 function 1; [9] GPIO4 function 1; [10] PCIE glue/PXP VPD event @@ -939,8 +957,8 @@ TSEMI Hw interrupt; [30] PBF Parity error; [31] PBF Hw interrupt; */ #define MISC_REG_AEU_ENABLE1_NIG_0 0xa0ec #define MISC_REG_AEU_ENABLE1_NIG_1 0xa18c -/* [RW 32] first 32b for enabling the output for close the gate pxp 0. - mapped as follows: [0] NIG attention for function0; [1] NIG attention for +/* [RW 32] first 32b for enabling the output for close the gate pxp. mapped + as follows: [0] NIG attention for function0; [1] NIG attention for function1; [2] GPIO1 function 0; [3] GPIO2 function 0; [4] GPIO3 function 0; [5] GPIO4 function 0; [6] GPIO1 function 1; [7] GPIO2 function 1; [8] GPIO3 function 1; [9] GPIO4 function 1; [10] PCIE glue/PXP VPD event @@ -984,34 +1002,34 @@ interrupt; */ #define MISC_REG_AEU_ENABLE2_FUNC_1_OUT_0 0xa110 #define MISC_REG_AEU_ENABLE2_FUNC_1_OUT_1 0xa120 -/* [RW 32] second 32b for enabling the output for close the gate nig 0. - mapped as follows: [0] PBClient Parity error; [1] PBClient Hw interrupt; - [2] QM Parity error; [3] QM Hw interrupt; [4] Timers Parity error; [5] - Timers Hw interrupt; [6] XSDM Parity error; [7] XSDM Hw interrupt; [8] - XCM Parity error; [9] XCM Hw interrupt; [10] XSEMI Parity error; [11] - XSEMI Hw interrupt; [12] DoorbellQ Parity error; [13] DoorbellQ Hw - interrupt; [14] NIG Parity error; [15] NIG Hw interrupt; [16] Vaux PCI - core Parity error; [17] Vaux PCI core Hw interrupt; [18] Debug Parity - error; [19] Debug Hw interrupt; [20] USDM Parity error; [21] USDM Hw - interrupt; [22] UCM Parity error; [23] UCM Hw interrupt; [24] USEMI - Parity error; [25] USEMI Hw interrupt; [26] UPB Parity error; [27] UPB Hw - interrupt; [28] CSDM Parity error; [29] CSDM Hw interrupt; [30] CCM - Parity error; [31] CCM Hw interrupt; */ +/* [RW 32] second 32b for enabling the output for close the gate nig. mapped + as follows: [0] PBClient Parity error; [1] PBClient Hw interrupt; [2] QM + Parity error; [3] QM Hw interrupt; [4] Timers Parity error; [5] Timers Hw + interrupt; [6] XSDM Parity error; [7] XSDM Hw interrupt; [8] XCM Parity + error; [9] XCM Hw interrupt; [10] XSEMI Parity error; [11] XSEMI Hw + interrupt; [12] DoorbellQ Parity error; [13] DoorbellQ Hw interrupt; [14] + NIG Parity error; [15] NIG Hw interrupt; [16] Vaux PCI core Parity error; + [17] Vaux PCI core Hw interrupt; [18] Debug Parity error; [19] Debug Hw + interrupt; [20] USDM Parity error; [21] USDM Hw interrupt; [22] UCM + Parity error; [23] UCM Hw interrupt; [24] USEMI Parity error; [25] USEMI + Hw interrupt; [26] UPB Parity error; [27] UPB Hw interrupt; [28] CSDM + Parity error; [29] CSDM Hw interrupt; [30] CCM Parity error; [31] CCM Hw + interrupt; */ #define MISC_REG_AEU_ENABLE2_NIG_0 0xa0f0 #define MISC_REG_AEU_ENABLE2_NIG_1 0xa190 -/* [RW 32] second 32b for enabling the output for close the gate pxp 0. - mapped as follows: [0] PBClient Parity error; [1] PBClient Hw interrupt; - [2] QM Parity error; [3] QM Hw interrupt; [4] Timers Parity error; [5] - Timers Hw interrupt; [6] XSDM Parity error; [7] XSDM Hw interrupt; [8] - XCM Parity error; [9] XCM Hw interrupt; [10] XSEMI Parity error; [11] - XSEMI Hw interrupt; [12] DoorbellQ Parity error; [13] DoorbellQ Hw - interrupt; [14] NIG Parity error; [15] NIG Hw interrupt; [16] Vaux PCI - core Parity error; [17] Vaux PCI core Hw interrupt; [18] Debug Parity - error; [19] Debug Hw interrupt; [20] USDM Parity error; [21] USDM Hw - interrupt; [22] UCM Parity error; [23] UCM Hw interrupt; [24] USEMI - Parity error; [25] USEMI Hw interrupt; [26] UPB Parity error; [27] UPB Hw - interrupt; [28] CSDM Parity error; [29] CSDM Hw interrupt; [30] CCM - Parity error; [31] CCM Hw interrupt; */ +/* [RW 32] second 32b for enabling the output for close the gate pxp. mapped + as follows: [0] PBClient Parity error; [1] PBClient Hw interrupt; [2] QM + Parity error; [3] QM Hw interrupt; [4] Timers Parity error; [5] Timers Hw + interrupt; [6] XSDM Parity error; [7] XSDM Hw interrupt; [8] XCM Parity + error; [9] XCM Hw interrupt; [10] XSEMI Parity error; [11] XSEMI Hw + interrupt; [12] DoorbellQ Parity error; [13] DoorbellQ Hw interrupt; [14] + NIG Parity error; [15] NIG Hw interrupt; [16] Vaux PCI core Parity error; + [17] Vaux PCI core Hw interrupt; [18] Debug Parity error; [19] Debug Hw + interrupt; [20] USDM Parity error; [21] USDM Hw interrupt; [22] UCM + Parity error; [23] UCM Hw interrupt; [24] USEMI Parity error; [25] USEMI + Hw interrupt; [26] UPB Parity error; [27] UPB Hw interrupt; [28] CSDM + Parity error; [29] CSDM Hw interrupt; [30] CCM Parity error; [31] CCM Hw + interrupt; */ #define MISC_REG_AEU_ENABLE2_PXP_0 0xa100 #define MISC_REG_AEU_ENABLE2_PXP_1 0xa1a0 /* [RW 32] third 32b for enabling the output for function 0 output0. mapped @@ -1044,34 +1062,34 @@ attn1; */ #define MISC_REG_AEU_ENABLE3_FUNC_1_OUT_0 0xa114 #define MISC_REG_AEU_ENABLE3_FUNC_1_OUT_1 0xa124 -/* [RW 32] third 32b for enabling the output for close the gate nig 0. - mapped as follows: [0] CSEMI Parity error; [1] CSEMI Hw interrupt; [2] - PXP Parity error; [3] PXP Hw interrupt; [4] PXPpciClockClient Parity - error; [5] PXPpciClockClient Hw interrupt; [6] CFC Parity error; [7] CFC - Hw interrupt; [8] CDU Parity error; [9] CDU Hw interrupt; [10] DMAE - Parity error; [11] DMAE Hw interrupt; [12] IGU (HC) Parity error; [13] - IGU (HC) Hw interrupt; [14] MISC Parity error; [15] MISC Hw interrupt; - [16] pxp_misc_mps_attn; [17] Flash event; [18] SMB event; [19] MCP attn0; - [20] MCP attn1; [21] SW timers attn_1 func0; [22] SW timers attn_2 func0; - [23] SW timers attn_3 func0; [24] SW timers attn_4 func0; [25] PERST; - [26] SW timers attn_1 func1; [27] SW timers attn_2 func1; [28] SW timers - attn_3 func1; [29] SW timers attn_4 func1; [30] General attn0; [31] - General attn1; */ +/* [RW 32] third 32b for enabling the output for close the gate nig. mapped + as follows: [0] CSEMI Parity error; [1] CSEMI Hw interrupt; [2] PXP + Parity error; [3] PXP Hw interrupt; [4] PXPpciClockClient Parity error; + [5] PXPpciClockClient Hw interrupt; [6] CFC Parity error; [7] CFC Hw + interrupt; [8] CDU Parity error; [9] CDU Hw interrupt; [10] DMAE Parity + error; [11] DMAE Hw interrupt; [12] IGU (HC) Parity error; [13] IGU (HC) + Hw interrupt; [14] MISC Parity error; [15] MISC Hw interrupt; [16] + pxp_misc_mps_attn; [17] Flash event; [18] SMB event; [19] MCP attn0; [20] + MCP attn1; [21] SW timers attn_1 func0; [22] SW timers attn_2 func0; [23] + SW timers attn_3 func0; [24] SW timers attn_4 func0; [25] PERST; [26] SW + timers attn_1 func1; [27] SW timers attn_2 func1; [28] SW timers attn_3 + func1; [29] SW timers attn_4 func1; [30] General attn0; [31] General + attn1; */ #define MISC_REG_AEU_ENABLE3_NIG_0 0xa0f4 #define MISC_REG_AEU_ENABLE3_NIG_1 0xa194 -/* [RW 32] third 32b for enabling the output for close the gate pxp 0. - mapped as follows: [0] CSEMI Parity error; [1] CSEMI Hw interrupt; [2] - PXP Parity error; [3] PXP Hw interrupt; [4] PXPpciClockClient Parity - error; [5] PXPpciClockClient Hw interrupt; [6] CFC Parity error; [7] CFC - Hw interrupt; [8] CDU Parity error; [9] CDU Hw interrupt; [10] DMAE - Parity error; [11] DMAE Hw interrupt; [12] IGU (HC) Parity error; [13] - IGU (HC) Hw interrupt; [14] MISC Parity error; [15] MISC Hw interrupt; - [16] pxp_misc_mps_attn; [17] Flash event; [18] SMB event; [19] MCP attn0; - [20] MCP attn1; [21] SW timers attn_1 func0; [22] SW timers attn_2 func0; - [23] SW timers attn_3 func0; [24] SW timers attn_4 func0; [25] PERST; - [26] SW timers attn_1 func1; [27] SW timers attn_2 func1; [28] SW timers - attn_3 func1; [29] SW timers attn_4 func1; [30] General attn0; [31] - General attn1; */ +/* [RW 32] third 32b for enabling the output for close the gate pxp. mapped + as follows: [0] CSEMI Parity error; [1] CSEMI Hw interrupt; [2] PXP + Parity error; [3] PXP Hw interrupt; [4] PXPpciClockClient Parity error; + [5] PXPpciClockClient Hw interrupt; [6] CFC Parity error; [7] CFC Hw + interrupt; [8] CDU Parity error; [9] CDU Hw interrupt; [10] DMAE Parity + error; [11] DMAE Hw interrupt; [12] IGU (HC) Parity error; [13] IGU (HC) + Hw interrupt; [14] MISC Parity error; [15] MISC Hw interrupt; [16] + pxp_misc_mps_attn; [17] Flash event; [18] SMB event; [19] MCP attn0; [20] + MCP attn1; [21] SW timers attn_1 func0; [22] SW timers attn_2 func0; [23] + SW timers attn_3 func0; [24] SW timers attn_4 func0; [25] PERST; [26] SW + timers attn_1 func1; [27] SW timers attn_2 func1; [28] SW timers attn_3 + func1; [29] SW timers attn_4 func1; [30] General attn0; [31] General + attn1; */ #define MISC_REG_AEU_ENABLE3_PXP_0 0xa104 #define MISC_REG_AEU_ENABLE3_PXP_1 0xa1a4 /* [RW 32] fourth 32b for enabling the output for function 0 output0.mapped @@ -1088,6 +1106,10 @@ Latched ump_tx_parity; [31] MCP Latched scpad_parity; */ #define MISC_REG_AEU_ENABLE4_FUNC_0_OUT_0 0xa078 #define MISC_REG_AEU_ENABLE4_FUNC_0_OUT_2 0xa098 +#define MISC_REG_AEU_ENABLE4_FUNC_0_OUT_4 0xa0b8 +#define MISC_REG_AEU_ENABLE4_FUNC_0_OUT_5 0xa0c8 +#define MISC_REG_AEU_ENABLE4_FUNC_0_OUT_6 0xa0d8 +#define MISC_REG_AEU_ENABLE4_FUNC_0_OUT_7 0xa0e8 /* [RW 32] fourth 32b for enabling the output for function 1 output0.mapped as follows: [0] General attn2; [1] General attn3; [2] General attn4; [3] General attn5; [4] General attn6; [5] General attn7; [6] General attn8; @@ -1102,34 +1124,36 @@ Latched ump_tx_parity; [31] MCP Latched scpad_parity; */ #define MISC_REG_AEU_ENABLE4_FUNC_1_OUT_0 0xa118 #define MISC_REG_AEU_ENABLE4_FUNC_1_OUT_2 0xa138 -/* [RW 32] fourth 32b for enabling the output for close the gate nig - 0.mapped as follows: [0] General attn2; [1] General attn3; [2] General - attn4; [3] General attn5; [4] General attn6; [5] General attn7; [6] - General attn8; [7] General attn9; [8] General attn10; [9] General attn11; - [10] General attn12; [11] General attn13; [12] General attn14; [13] - General attn15; [14] General attn16; [15] General attn17; [16] General - attn18; [17] General attn19; [18] General attn20; [19] General attn21; - [20] Main power interrupt; [21] RBCR Latched attn; [22] RBCT Latched - attn; [23] RBCN Latched attn; [24] RBCU Latched attn; [25] RBCP Latched - attn; [26] GRC Latched timeout attention; [27] GRC Latched reserved - access attention; [28] MCP Latched rom_parity; [29] MCP Latched - ump_rx_parity; [30] MCP Latched ump_tx_parity; [31] MCP Latched - scpad_parity; */ +#define MISC_REG_AEU_ENABLE4_FUNC_1_OUT_4 0xa158 +#define MISC_REG_AEU_ENABLE4_FUNC_1_OUT_5 0xa168 +#define MISC_REG_AEU_ENABLE4_FUNC_1_OUT_6 0xa178 +#define MISC_REG_AEU_ENABLE4_FUNC_1_OUT_7 0xa188 +/* [RW 32] fourth 32b for enabling the output for close the gate nig.mapped + as follows: [0] General attn2; [1] General attn3; [2] General attn4; [3] + General attn5; [4] General attn6; [5] General attn7; [6] General attn8; + [7] General attn9; [8] General attn10; [9] General attn11; [10] General + attn12; [11] General attn13; [12] General attn14; [13] General attn15; + [14] General attn16; [15] General attn17; [16] General attn18; [17] + General attn19; [18] General attn20; [19] General attn21; [20] Main power + interrupt; [21] RBCR Latched attn; [22] RBCT Latched attn; [23] RBCN + Latched attn; [24] RBCU Latched attn; [25] RBCP Latched attn; [26] GRC + Latched timeout attention; [27] GRC Latched reserved access attention; + [28] MCP Latched rom_parity; [29] MCP Latched ump_rx_parity; [30] MCP + Latched ump_tx_parity; [31] MCP Latched scpad_parity; */ #define MISC_REG_AEU_ENABLE4_NIG_0 0xa0f8 #define MISC_REG_AEU_ENABLE4_NIG_1 0xa198 -/* [RW 32] fourth 32b for enabling the output for close the gate pxp - 0.mapped as follows: [0] General attn2; [1] General attn3; [2] General - attn4; [3] General attn5; [4] General attn6; [5] General attn7; [6] - General attn8; [7] General attn9; [8] General attn10; [9] General attn11; - [10] General attn12; [11] General attn13; [12] General attn14; [13] - General attn15; [14] General attn16; [15] General attn17; [16] General - attn18; [17] General attn19; [18] General attn20; [19] General attn21; - [20] Main power interrupt; [21] RBCR Latched attn; [22] RBCT Latched - attn; [23] RBCN Latched attn; [24] RBCU Latched attn; [25] RBCP Latched - attn; [26] GRC Latched timeout attention; [27] GRC Latched reserved - access attention; [28] MCP Latched rom_parity; [29] MCP Latched - ump_rx_parity; [30] MCP Latched ump_tx_parity; [31] MCP Latched - scpad_parity; */ +/* [RW 32] fourth 32b for enabling the output for close the gate pxp.mapped + as follows: [0] General attn2; [1] General attn3; [2] General attn4; [3] + General attn5; [4] General attn6; [5] General attn7; [6] General attn8; + [7] General attn9; [8] General attn10; [9] General attn11; [10] General + attn12; [11] General attn13; [12] General attn14; [13] General attn15; + [14] General attn16; [15] General attn17; [16] General attn18; [17] + General attn19; [18] General attn20; [19] General attn21; [20] Main power + interrupt; [21] RBCR Latched attn; [22] RBCT Latched attn; [23] RBCN + Latched attn; [24] RBCU Latched attn; [25] RBCP Latched attn; [26] GRC + Latched timeout attention; [27] GRC Latched reserved access attention; + [28] MCP Latched rom_parity; [29] MCP Latched ump_rx_parity; [30] MCP + Latched ump_tx_parity; [31] MCP Latched scpad_parity; */ #define MISC_REG_AEU_ENABLE4_PXP_0 0xa108 #define MISC_REG_AEU_ENABLE4_PXP_1 0xa1a8 /* [RW 1] set/clr general attention 0; this will set/clr bit 94 in the aeu @@ -1148,6 +1172,7 @@ #define MISC_REG_AEU_GENERAL_ATTN_19 0xa04c #define MISC_REG_AEU_GENERAL_ATTN_10 0xa028 #define MISC_REG_AEU_GENERAL_ATTN_11 0xa02c +#define MISC_REG_AEU_GENERAL_ATTN_12 0xa030 #define MISC_REG_AEU_GENERAL_ATTN_2 0xa008 #define MISC_REG_AEU_GENERAL_ATTN_20 0xa050 #define MISC_REG_AEU_GENERAL_ATTN_21 0xa054 @@ -1158,6 +1183,7 @@ #define MISC_REG_AEU_GENERAL_ATTN_7 0xa01c #define MISC_REG_AEU_GENERAL_ATTN_8 0xa020 #define MISC_REG_AEU_GENERAL_ATTN_9 0xa024 +#define MISC_REG_AEU_GENERAL_MASK 0xa61c /* [RW 32] first 32b for inverting the input for function 0; for each bit: 0= do not invert; 1= invert; mapped as follows: [0] NIG attention for function0; [1] NIG attention for function1; [2] GPIO1 mcp; [3] GPIO2 mcp; @@ -1189,10 +1215,29 @@ #define MISC_REG_AEU_INVERTER_2_FUNC_0 0xa230 #define MISC_REG_AEU_INVERTER_2_FUNC_1 0xa240 /* [RW 10] [7:0] = mask 8 attention output signals toward IGU function0; - [9:8] = mask close the gates signals of function 0 toward PXP [8] and NIG - [9]. Zero = mask; one = unmask */ + [9:8] = raserved. Zero = mask; one = unmask */ #define MISC_REG_AEU_MASK_ATTN_FUNC_0 0xa060 #define MISC_REG_AEU_MASK_ATTN_FUNC_1 0xa064 +/* [RW 1] If set a system kill occurred */ +#define MISC_REG_AEU_SYS_KILL_OCCURRED 0xa610 +/* [RW 32] Represent the status of the input vector to the AEU when a system + kill occurred. The register is reset in por reset. Mapped as follows: [0] + NIG attention for function0; [1] NIG attention for function1; [2] GPIO1 + mcp; [3] GPIO2 mcp; [4] GPIO3 mcp; [5] GPIO4 mcp; [6] GPIO1 function 1; + [7] GPIO2 function 1; [8] GPIO3 function 1; [9] GPIO4 function 1; [10] + PCIE glue/PXP VPD event function0; [11] PCIE glue/PXP VPD event + function1; [12] PCIE glue/PXP Expansion ROM event0; [13] PCIE glue/PXP + Expansion ROM event1; [14] SPIO4; [15] SPIO5; [16] MSI/X indication for + mcp; [17] MSI/X indication for function 1; [18] BRB Parity error; [19] + BRB Hw interrupt; [20] PRS Parity error; [21] PRS Hw interrupt; [22] SRC + Parity error; [23] SRC Hw interrupt; [24] TSDM Parity error; [25] TSDM Hw + interrupt; [26] TCM Parity error; [27] TCM Hw interrupt; [28] TSEMI + Parity error; [29] TSEMI Hw interrupt; [30] PBF Parity error; [31] PBF Hw + interrupt; */ +#define MISC_REG_AEU_SYS_KILL_STATUS_0 0xa600 +#define MISC_REG_AEU_SYS_KILL_STATUS_1 0xa604 +#define MISC_REG_AEU_SYS_KILL_STATUS_2 0xa608 +#define MISC_REG_AEU_SYS_KILL_STATUS_3 0xa60c /* [R 4] This field indicates the type of the device. '0' - 2 Ports; '1' - 1 Port. */ #define MISC_REG_BOND_ID 0xa400 @@ -1206,8 +1251,80 @@ starts at 0x0 for the A0 tape-out and increments by one for each all-layer tape-out. */ #define MISC_REG_CHIP_REV 0xa40c -/* [RW 32] The following driver registers(1..6) represent 6 drivers and 32 - clients. Each client can be controlled by one driver only. One in each +/* [RW 32] The following driver registers(1...16) represent 16 drivers and + 32 clients. Each client can be controlled by one driver only. One in each + bit represent that this driver control the appropriate client (Ex: bit 5 + is set means this driver control client number 5). addr1 = set; addr0 = + clear; read from both addresses will give the same result = status. write + to address 1 will set a request to control all the clients that their + appropriate bit (in the write command) is set. if the client is free (the + appropriate bit in all the other drivers is clear) one will be written to + that driver register; if the client isn't free the bit will remain zero. + if the appropriate bit is set (the driver request to gain control on a + client it already controls the ~MISC_REGISTERS_INT_STS.GENERIC_SW + interrupt will be asserted). write to address 0 will set a request to + free all the clients that their appropriate bit (in the write command) is + set. if the appropriate bit is clear (the driver request to free a client + it doesn't controls the ~MISC_REGISTERS_INT_STS.GENERIC_SW interrupt will + be asserted). */ +#define MISC_REG_DRIVER_CONTROL_10 0xa3e0 +#define MISC_REG_DRIVER_CONTROL_10_SIZE 2 +/* [RW 32] The following driver registers(1...16) represent 16 drivers and + 32 clients. Each client can be controlled by one driver only. One in each + bit represent that this driver control the appropriate client (Ex: bit 5 + is set means this driver control client number 5). addr1 = set; addr0 = + clear; read from both addresses will give the same result = status. write + to address 1 will set a request to control all the clients that their + appropriate bit (in the write command) is set. if the client is free (the + appropriate bit in all the other drivers is clear) one will be written to + that driver register; if the client isn't free the bit will remain zero. + if the appropriate bit is set (the driver request to gain control on a + client it already controls the ~MISC_REGISTERS_INT_STS.GENERIC_SW + interrupt will be asserted). write to address 0 will set a request to + free all the clients that their appropriate bit (in the write command) is + set. if the appropriate bit is clear (the driver request to free a client + it doesn't controls the ~MISC_REGISTERS_INT_STS.GENERIC_SW interrupt will + be asserted). */ +#define MISC_REG_DRIVER_CONTROL_11 0xa3e8 +#define MISC_REG_DRIVER_CONTROL_11_SIZE 2 +/* [RW 32] The following driver registers(1...16) represent 16 drivers and + 32 clients. Each client can be controlled by one driver only. One in each + bit represent that this driver control the appropriate client (Ex: bit 5 + is set means this driver control client number 5). addr1 = set; addr0 = + clear; read from both addresses will give the same result = status. write + to address 1 will set a request to control all the clients that their + appropriate bit (in the write command) is set. if the client is free (the + appropriate bit in all the other drivers is clear) one will be written to + that driver register; if the client isn't free the bit will remain zero. + if the appropriate bit is set (the driver request to gain control on a + client it already controls the ~MISC_REGISTERS_INT_STS.GENERIC_SW + interrupt will be asserted). write to address 0 will set a request to + free all the clients that their appropriate bit (in the write command) is + set. if the appropriate bit is clear (the driver request to free a client + it doesn't controls the ~MISC_REGISTERS_INT_STS.GENERIC_SW interrupt will + be asserted). */ +#define MISC_REG_DRIVER_CONTROL_12 0xa3f0 +#define MISC_REG_DRIVER_CONTROL_12_SIZE 2 +/* [RW 32] The following driver registers(1...16) represent 16 drivers and + 32 clients. Each client can be controlled by one driver only. One in each + bit represent that this driver control the appropriate client (Ex: bit 5 + is set means this driver control client number 5). addr1 = set; addr0 = + clear; read from both addresses will give the same result = status. write + to address 1 will set a request to control all the clients that their + appropriate bit (in the write command) is set. if the client is free (the + appropriate bit in all the other drivers is clear) one will be written to + that driver register; if the client isn't free the bit will remain zero. + if the appropriate bit is set (the driver request to gain control on a + client it already controls the ~MISC_REGISTERS_INT_STS.GENERIC_SW + interrupt will be asserted). write to address 0 will set a request to + free all the clients that their appropriate bit (in the write command) is + set. if the appropriate bit is clear (the driver request to free a client + it doesn't controls the ~MISC_REGISTERS_INT_STS.GENERIC_SW interrupt will + be asserted). */ +#define MISC_REG_DRIVER_CONTROL_13 0xa3f8 +#define MISC_REG_DRIVER_CONTROL_13_SIZE 2 +/* [RW 32] The following driver registers(1...16) represent 16 drivers and + 32 clients. Each client can be controlled by one driver only. One in each bit represent that this driver control the appropriate client (Ex: bit 5 is set means this driver control client number 5). addr1 = set; addr0 = clear; read from both addresses will give the same result = status. write @@ -1223,6 +1340,47 @@ it doesn't controls the ~MISC_REGISTERS_INT_STS.GENERIC_SW interrupt will be asserted). */ #define MISC_REG_DRIVER_CONTROL_1 0xa510 +#define MISC_REG_DRIVER_CONTROL_14 0xa5e0 +#define MISC_REG_DRIVER_CONTROL_14_SIZE 2 +/* [RW 32] The following driver registers(1...16) represent 16 drivers and + 32 clients. Each client can be controlled by one driver only. One in each + bit represent that this driver control the appropriate client (Ex: bit 5 + is set means this driver control client number 5). addr1 = set; addr0 = + clear; read from both addresses will give the same result = status. write + to address 1 will set a request to control all the clients that their + appropriate bit (in the write command) is set. if the client is free (the + appropriate bit in all the other drivers is clear) one will be written to + that driver register; if the client isn't free the bit will remain zero. + if the appropriate bit is set (the driver request to gain control on a + client it already controls the ~MISC_REGISTERS_INT_STS.GENERIC_SW + interrupt will be asserted). write to address 0 will set a request to + free all the clients that their appropriate bit (in the write command) is + set. if the appropriate bit is clear (the driver request to free a client + it doesn't controls the ~MISC_REGISTERS_INT_STS.GENERIC_SW interrupt will + be asserted). */ +#define MISC_REG_DRIVER_CONTROL_15 0xa5e8 +#define MISC_REG_DRIVER_CONTROL_15_SIZE 2 +/* [RW 32] The following driver registers(1...16) represent 16 drivers and + 32 clients. Each client can be controlled by one driver only. One in each + bit represent that this driver control the appropriate client (Ex: bit 5 + is set means this driver control client number 5). addr1 = set; addr0 = + clear; read from both addresses will give the same result = status. write + to address 1 will set a request to control all the clients that their + appropriate bit (in the write command) is set. if the client is free (the + appropriate bit in all the other drivers is clear) one will be written to + that driver register; if the client isn't free the bit will remain zero. + if the appropriate bit is set (the driver request to gain control on a + client it already controls the ~MISC_REGISTERS_INT_STS.GENERIC_SW + interrupt will be asserted). write to address 0 will set a request to + free all the clients that their appropriate bit (in the write command) is + set. if the appropriate bit is clear (the driver request to free a client + it doesn't controls the ~MISC_REGISTERS_INT_STS.GENERIC_SW interrupt will + be asserted). */ +#define MISC_REG_DRIVER_CONTROL_16 0xa5f0 +#define MISC_REG_DRIVER_CONTROL_16_SIZE 2 +/* [RW 1] e1hmf for WOL. If clr WOL signal o the PXP will be send on bit 0 + only. */ +#define MISC_REG_E1HMF_MODE 0xa5f8 /* [RW 32] GPIO. [31-28] FLOAT port 0; [27-24] FLOAT port 0; When any of these bits is written as a '1'; the corresponding SPIO bit will turn off it's drivers and become an input. This is the reset state of all GPIO @@ -1240,6 +1398,18 @@ This is the result value of the pin; not the drive value. Writing these bits will have not effect. */ #define MISC_REG_GPIO 0xa490 +/* [R 28] this field hold the last information that caused reserved + attention. bits [19:0] - address; [22:20] function; [23] reserved; + [27:24] the master thatcaused the attention - according to the following + encodeing:1 = pxp; 2 = mcp; 3 = usdm; 4 = tsdm; 5 = xsdm; 6 = csdm; 7 = + dbu; 8 = dmae */ +#define MISC_REG_GRC_RSV_ATTN 0xa3c0 +/* [R 28] this field hold the last information that caused timeout + attention. bits [19:0] - address; [22:20] function; [23] reserved; + [27:24] the master thatcaused the attention - according to the following + encodeing:1 = pxp; 2 = mcp; 3 = usdm; 4 = tsdm; 5 = xsdm; 6 = csdm; 7 = + dbu; 8 = dmae */ +#define MISC_REG_GRC_TIMEOUT_ATTN 0xa3c4 /* [RW 1] Setting this bit enables a timer in the GRC block to timeout any access that does not finish within ~misc_registers_grc_timout_val.grc_timeout_val cycles. When this bit is @@ -1282,6 +1452,11 @@ #define MISC_REG_MISC_PRTY_MASK 0xa398 /* [R 1] Parity register #0 read */ #define MISC_REG_MISC_PRTY_STS 0xa38c +#define MISC_REG_NIG_WOL_P0 0xa270 +#define MISC_REG_NIG_WOL_P1 0xa274 +/* [R 1] If set indicate that the pcie_rst_b was asserted without perst + assertion */ +#define MISC_REG_PCIE_HOT_RESET 0xa618 /* [RW 32] 32 LSB of storm PLL first register; reset val = 0x 071d2911. inside order of the bits is: [0] P1 divider[0] (reset value 1); [1] P1 divider[1] (reset value 0); [2] P1 divider[2] (reset value 0); [3] P1 @@ -1303,7 +1478,7 @@ #define MISC_REG_PLL_STORM_CTRL_2 0xa298 #define MISC_REG_PLL_STORM_CTRL_3 0xa29c #define MISC_REG_PLL_STORM_CTRL_4 0xa2a0 -/* [RW 32] reset reg#1; rite/read one = the specific block is out of reset; +/* [RW 32] reset reg#2; rite/read one = the specific block is out of reset; write/read zero = the specific block is in reset; addr 0-wr- the write value will be written to the register; addr 1-set - one will be written to all the bits that have the value of one in the data written (bits that @@ -1311,14 +1486,12 @@ written to all the bits that have the value of one in the data written (bits that have the value of zero will not be change); addr 3-ignore; read ignore from all addr except addr 00; inside order of the bits is: - [0] rst_brb1; [1] rst_prs; [2] rst_src; [3] rst_tsdm; [4] rst_tsem; [5] - rst_tcm; [6] rst_rbcr; [7] rst_nig; [8] rst_usdm; [9] rst_ucm; [10] - rst_usem; [11] rst_upb; [12] rst_ccm; [13] rst_csem; [14] rst_csdm; [15] - rst_rbcu; [16] rst_pbf; [17] rst_qm; [18] rst_tm; [19] rst_dorq; [20] - rst_xcm; [21] rst_xsdm; [22] rst_xsem; [23] rst_rbct; [24] rst_cdu; [25] - rst_cfc; [26] rst_pxp; [27] rst_pxpv; [28] rst_rbcp; [29] rst_hc; [30] - rst_dmae; [31] rst_semi_rtc; */ -#define MISC_REG_RESET_REG_1 0xa580 + [0] rst_bmac0; [1] rst_bmac1; [2] rst_emac0; [3] rst_emac1; [4] rst_grc; + [5] rst_mcp_n_reset_reg_hard_core; [6] rst_ mcp_n_hard_core_rst_b; [7] + rst_ mcp_n_reset_cmn_cpu; [8] rst_ mcp_n_reset_cmn_core; [9] rst_rbcn; + [10] rst_dbg; [11] rst_misc_core; [12] rst_dbue (UART); [13] + Pci_resetmdio_n; [14] rst_emac0_hard_core; [15] rst_emac1_hard_core; 16] + rst_pxp_rq_rd_wr; 31:17] reserved */ #define MISC_REG_RESET_REG_2 0xa590 /* [RW 20] 20 bit GRC address where the scratch-pad of the MCP that is shared with the driver resides */ @@ -1345,7 +1518,7 @@ select VAUX supply. (This is an output pin only; it is not controlled by the SET and CLR fields; it is controlled by the Main Power SM; the FLOAT field is not applicable for this pin; only the VALUE fields is relevant - - it reflects the output value); [3] reserved; [4] spio_4; [5] spio_5; [6] + it reflects the output value); [3] port swap [4] spio_4; [5] spio_5; [6] Bit 0 of UMP device ID select; read by UMP firmware; [7] Bit 1 of UMP device ID select; read by UMP firmware. */ #define MISC_REG_SPIO 0xa4fc @@ -1394,8 +1567,9 @@ #define NIG_REG_BRB1_PAUSE_IN_EN 0x100c8 /* [RW 1] output enable for RX BRB1 LP IF */ #define NIG_REG_BRB_LB_OUT_EN 0x10100 -/* [WB_W 72] Debug packet to LP from RBC; Data spelling:[63:0] data; 64] - error; [67:65]eop_bvalid; [68]eop; [69]sop; [70]port_id; 71]flush */ +/* [WB_W 82] Debug packet to LP from RBC; Data spelling:[63:0] data; 64] + error; [67:65]eop_bvalid; [68]eop; [69]sop; [70]port_id; 71]flush; + 72:73]-vnic_num; 81:74]-sideband_info */ #define NIG_REG_DEBUG_PACKET_LB 0x10800 /* [RW 1] Input enable for TX Debug packet */ #define NIG_REG_EGRESS_DEBUG_IN_EN 0x100dc @@ -1409,6 +1583,8 @@ /* [RW 1] MAC configuration for packets of port0. If 1 - all packet outputs to emac for port0; other way to bmac for port0 */ #define NIG_REG_EGRESS_EMAC0_PORT 0x10058 +/* [RW 32] TX_MNG_FIFO in NIG_TX_PORT0; data[31:0] written in FIFO order. */ +#define NIG_REG_EGRESS_MNG0_FIFO 0x1045c /* [RW 1] Input enable for TX PBF user packet port0 IF */ #define NIG_REG_EGRESS_PBF0_IN_EN 0x100cc /* [RW 1] Input enable for TX PBF user packet port1 IF */ @@ -1438,6 +1614,8 @@ #define NIG_REG_INGRESS_EOP_LB_FIFO 0x104e4 /* [RW 1] led 10g for port 0 */ #define NIG_REG_LED_10G_P0 0x10320 +/* [RW 1] led 10g for port 1 */ +#define NIG_REG_LED_10G_P1 0x10324 /* [RW 1] Port0: This bit is set to enable the use of the ~nig_registers_led_control_blink_rate_p0.led_control_blink_rate_p0 field defined below. If this bit is cleared; then the blink rate will be about @@ -1470,19 +1648,47 @@ /* [RW 4] led mode for port0: 0 MAC; 1-3 PHY1; 4 MAC2; 5-7 PHY4; 8-MAC3; 9-11PHY7; 12 MAC4; 13-15 PHY10; */ #define NIG_REG_LED_MODE_P0 0x102f0 +#define NIG_REG_LLH0_ACPI_PAT_0_CRC 0x1015c +#define NIG_REG_LLH0_ACPI_PAT_6_LEN 0x10154 #define NIG_REG_LLH0_BRB1_DRV_MASK 0x10244 +#define NIG_REG_LLH0_BRB1_DRV_MASK_MF 0x16048 /* [RW 1] send to BRB1 if no match on any of RMP rules. */ #define NIG_REG_LLH0_BRB1_NOT_MCP 0x1025c +/* [RW 2] Determine the classification participants. 0: no classification.1: + classification upon VLAN id. 2: classification upon MAC address. 3: + classification upon both VLAN id & MAC addr. */ +#define NIG_REG_LLH0_CLS_TYPE 0x16080 /* [RW 32] cm header for llh0 */ #define NIG_REG_LLH0_CM_HEADER 0x1007c +#define NIG_REG_LLH0_DEST_IP_0_1 0x101dc +#define NIG_REG_LLH0_DEST_MAC_0_0 0x101c0 +/* [RW 16] destination TCP address 1. The LLH will look for this address in + all incoming packets. */ +#define NIG_REG_LLH0_DEST_TCP_0 0x10220 +/* [RW 16] destination UDP address 1 The LLH will look for this address in + all incoming packets. */ +#define NIG_REG_LLH0_DEST_UDP_0 0x10214 #define NIG_REG_LLH0_ERROR_MASK 0x1008c /* [RW 8] event id for llh0 */ #define NIG_REG_LLH0_EVENT_ID 0x10084 +#define NIG_REG_LLH0_FUNC_EN 0x160fc +#define NIG_REG_LLH0_FUNC_VLAN_ID 0x16100 +/* [RW 1] Determine the IP version to look for in + ~nig_registers_llh0_dest_ip_0.llh0_dest_ip_0. 0 - IPv6; 1-IPv4 */ +#define NIG_REG_LLH0_IPV4_IPV6_0 0x10208 +/* [RW 1] t bit for llh0 */ +#define NIG_REG_LLH0_T_BIT 0x10074 +/* [RW 12] VLAN ID 1. In case of VLAN packet the LLH will look for this ID. */ +#define NIG_REG_LLH0_VLAN_ID_0 0x1022c /* [RW 8] init credit counter for port0 in LLH */ #define NIG_REG_LLH0_XCM_INIT_CREDIT 0x10554 #define NIG_REG_LLH0_XCM_MASK 0x10130 /* [RW 1] send to BRB1 if no match on any of RMP rules. */ #define NIG_REG_LLH1_BRB1_NOT_MCP 0x102dc +/* [RW 2] Determine the classification participants. 0: no classification.1: + classification upon VLAN id. 2: classification upon MAC address. 3: + classification upon both VLAN id & MAC addr. */ +#define NIG_REG_LLH1_CLS_TYPE 0x16084 /* [RW 32] cm header for llh1 */ #define NIG_REG_LLH1_CM_HEADER 0x10080 #define NIG_REG_LLH1_ERROR_MASK 0x10090 @@ -1491,13 +1697,26 @@ /* [RW 8] init credit counter for port1 in LLH */ #define NIG_REG_LLH1_XCM_INIT_CREDIT 0x10564 #define NIG_REG_LLH1_XCM_MASK 0x10134 +/* [RW 1] When this bit is set; the LLH will expect all packets to be with + e1hov */ +#define NIG_REG_LLH_E1HOV_MODE 0x160d8 +/* [RW 1] When this bit is set; the LLH will classify the packet before + sending it to the BRB or calculating WoL on it. */ +#define NIG_REG_LLH_MF_MODE 0x16024 #define NIG_REG_MASK_INTERRUPT_PORT0 0x10330 #define NIG_REG_MASK_INTERRUPT_PORT1 0x10334 /* [RW 1] Output signal from NIG to EMAC0. When set enables the EMAC0 block. */ #define NIG_REG_NIG_EMAC0_EN 0x1003c +/* [RW 1] Output signal from NIG to EMAC1. When set enables the EMAC1 block. */ +#define NIG_REG_NIG_EMAC1_EN 0x10040 /* [RW 1] Output signal from NIG to TX_EMAC0. When set indicates to the EMAC0 to strip the CRC from the ingress packets. */ #define NIG_REG_NIG_INGRESS_EMAC0_NO_CRC 0x10044 +/* [R 32] Interrupt register #0 read */ +#define NIG_REG_NIG_INT_STS_0 0x103b0 +#define NIG_REG_NIG_INT_STS_1 0x103c0 +/* [R 32] Parity register #0 read */ +#define NIG_REG_NIG_PRTY_STS 0x103d0 /* [RW 1] Input enable for RX PBF LP IF */ #define NIG_REG_PBF_LB_IN_EN 0x100b4 /* [RW 1] Value of this register will be transmitted to port swap when @@ -1529,8 +1748,12 @@ #define NIG_REG_XCM0_OUT_EN 0x100f0 /* [RW 1] output enable for RX_XCM1 IF */ #define NIG_REG_XCM1_OUT_EN 0x100f4 +/* [RW 1] control to xgxs - remote PHY in-band MDIO */ +#define NIG_REG_XGXS0_CTRL_EXTREMOTEMDIOST 0x10348 /* [RW 5] control to xgxs - CL45 DEVAD */ #define NIG_REG_XGXS0_CTRL_MD_DEVAD 0x1033c +/* [RW 1] control to xgxs; 0 - clause 45; 1 - clause 22 */ +#define NIG_REG_XGXS0_CTRL_MD_ST 0x10338 /* [RW 5] control to xgxs - CL22 PHY_ADD and CL45 PRTAD */ #define NIG_REG_XGXS0_CTRL_PHY_ADDR 0x10340 /* [R 1] status from xgxs0 that inputs to interrupt logic of link10g. */ @@ -1658,11 +1881,15 @@ #define PRS_REG_CM_HDR_TYPE_4 0x40088 /* [RW 32] The CM header in case there was not a match on the connection */ #define PRS_REG_CM_NO_MATCH_HDR 0x400b8 +/* [RW 1] Indicates if in e1hov mode. 0=non-e1hov mode; 1=e1hov mode. */ +#define PRS_REG_E1HOV_MODE 0x401c8 /* [RW 8] The 8-bit event ID for a match and packet type 1. Used in packet start message to TCM. */ #define PRS_REG_EVENT_ID_1 0x40054 #define PRS_REG_EVENT_ID_2 0x40058 #define PRS_REG_EVENT_ID_3 0x4005c +/* [RW 16] The Ethernet type value for FCoE */ +#define PRS_REG_FCOE_TYPE 0x401d0 /* [RW 8] Context region for flush packet with packet type 0. Used in CFC load request message. */ #define PRS_REG_FLUSH_REGIONS_TYPE_0 0x40004 @@ -1732,6 +1959,11 @@ #define PXP2_REG_HST_HEADER_FIFO_STATUS 0x120478 #define PXP2_REG_PGL_CONTROL0 0x120490 #define PXP2_REG_PGL_CONTROL1 0x120514 +/* [RW 32] third dword data of expansion rom request. this register is + special. reading from it provides a vector outstanding read requests. if + a bit is zero it means that a read request on the corresponding tag did + not finish yet (not all completions have arrived for it) */ +#define PXP2_REG_PGL_EXP_ROM2 0x120808 /* [RW 32] Inbound interrupt table for CSDM: bits[31:16]-mask; its[15:0]-address */ #define PXP2_REG_PGL_INT_CSDM_0 0x1204f4 @@ -1775,8 +2007,7 @@ /* [R 1] this bit indicates that a read request was blocked because of bus_master_en was deasserted */ #define PXP2_REG_PGL_READ_BLOCKED 0x120568 -/* [R 6] debug only */ -#define PXP2_REG_PGL_TXR_CDTS 0x120528 +#define PXP2_REG_PGL_TAGS_LIMIT 0x1205a8 /* [R 18] debug only */ #define PXP2_REG_PGL_TXW_CDTS 0x12052c /* [R 1] this bit indicates that a write request was blocked because of @@ -1828,6 +2059,7 @@ #define PXP2_REG_PSWRQ_QM0_L2P 0x120038 #define PXP2_REG_PSWRQ_SRC0_L2P 0x120054 #define PXP2_REG_PSWRQ_TM0_L2P 0x12001c +#define PXP2_REG_PSWRQ_TSDM0_L2P 0x1200e0 /* [RW 25] Interrupt mask register #0 read/write */ #define PXP2_REG_PXP2_INT_MASK 0x120578 /* [R 25] Interrupt register #0 read */ @@ -2016,8 +2248,12 @@ #define PXP2_REG_RQ_BW_WR_UBOUND29 0x1202a4 /* [RW 7] Bandwidth upper bound for VQ30 */ #define PXP2_REG_RQ_BW_WR_UBOUND30 0x1202a8 +/* [RW 18] external first_mem_addr field in L2P table for CDU module port 0 */ +#define PXP2_REG_RQ_CDU0_EFIRST_MEM_ADDR 0x120008 /* [RW 2] Endian mode for cdu */ #define PXP2_REG_RQ_CDU_ENDIAN_M 0x1201a0 +#define PXP2_REG_RQ_CDU_FIRST_ILT 0x12061c +#define PXP2_REG_RQ_CDU_LAST_ILT 0x120620 /* [RW 3] page size in L2P table for CDU module; -4k; -8k; -16k; -32k; -64k; -128k */ #define PXP2_REG_RQ_CDU_P_SIZE 0x120018 @@ -2029,14 +2265,26 @@ /* [RW 1] When '1'; requests will enter input buffers but wont get out towards the glue */ #define PXP2_REG_RQ_DISABLE_INPUTS 0x120330 +/* [RW 1] 1 - SR will be aligned by 64B; 0 - SR will be aligned by 8B */ +#define PXP2_REG_RQ_DRAM_ALIGN 0x1205b0 +/* [RW 1] If 1 ILT failiue will not result in ELT access; An interrupt will + be asserted */ +#define PXP2_REG_RQ_ELT_DISABLE 0x12066c /* [RW 2] Endian mode for hc */ #define PXP2_REG_RQ_HC_ENDIAN_M 0x1201a8 +/* [RW 1] when '0' ILT logic will work as in A0; otherwise B0; for back + compatibility needs; Note that different registers are used per mode */ +#define PXP2_REG_RQ_ILT_MODE 0x1205b4 /* [WB 53] Onchip address table */ #define PXP2_REG_RQ_ONCHIP_AT 0x122000 +/* [WB 53] Onchip address table - B0 */ +#define PXP2_REG_RQ_ONCHIP_AT_B0 0x128000 /* [RW 13] Pending read limiter threshold; in Dwords */ #define PXP2_REG_RQ_PDR_LIMIT 0x12033c /* [RW 2] Endian mode for qm */ #define PXP2_REG_RQ_QM_ENDIAN_M 0x120194 +#define PXP2_REG_RQ_QM_FIRST_ILT 0x120634 +#define PXP2_REG_RQ_QM_LAST_ILT 0x120638 /* [RW 3] page size in L2P table for QM module; -4k; -8k; -16k; -32k; -64k; -128k */ #define PXP2_REG_RQ_QM_P_SIZE 0x120050 @@ -2050,16 +2298,22 @@ #define PXP2_REG_RQ_RD_MBS1 0x120168 /* [RW 2] Endian mode for src */ #define PXP2_REG_RQ_SRC_ENDIAN_M 0x12019c +#define PXP2_REG_RQ_SRC_FIRST_ILT 0x12063c +#define PXP2_REG_RQ_SRC_LAST_ILT 0x120640 /* [RW 3] page size in L2P table for SRC module; -4k; -8k; -16k; -32k; -64k; -128k */ #define PXP2_REG_RQ_SRC_P_SIZE 0x12006c /* [RW 2] Endian mode for tm */ #define PXP2_REG_RQ_TM_ENDIAN_M 0x120198 +#define PXP2_REG_RQ_TM_FIRST_ILT 0x120644 +#define PXP2_REG_RQ_TM_LAST_ILT 0x120648 /* [RW 3] page size in L2P table for TM module; -4k; -8k; -16k; -32k; -64k; -128k */ #define PXP2_REG_RQ_TM_P_SIZE 0x120034 /* [R 5] Number of entries in the ufifo; his fifo has l2p completions */ #define PXP2_REG_RQ_UFIFO_NUM_OF_ENTRY 0x12080c +/* [RW 18] external first_mem_addr field in L2P table for USDM module port 0 */ +#define PXP2_REG_RQ_USDM0_EFIRST_MEM_ADDR 0x120094 /* [R 8] Number of entries occupied by vq 0 in pswrq memory */ #define PXP2_REG_RQ_VQ0_ENTRY_CNT 0x120810 /* [R 8] Number of entries occupied by vq 10 in pswrq memory */ @@ -2130,19 +2384,63 @@ /* [RW 3] Max burst size filed for write requests port 1; 000 - 128B; 001:256B; 010: 512B; */ #define PXP2_REG_RQ_WR_MBS1 0x120164 +/* [RW 2] 0 - 128B; - 256B; - 512B; - 1024B; when the payload in the + buffer reaches this number has_payload will be asserted */ +#define PXP2_REG_WR_CDU_MPS 0x1205f0 +/* [RW 2] 0 - 128B; - 256B; - 512B; - 1024B; when the payload in the + buffer reaches this number has_payload will be asserted */ +#define PXP2_REG_WR_CSDM_MPS 0x1205d0 +/* [RW 2] 0 - 128B; - 256B; - 512B; - 1024B; when the payload in the + buffer reaches this number has_payload will be asserted */ +#define PXP2_REG_WR_DBG_MPS 0x1205e8 +/* [RW 2] 0 - 128B; - 256B; - 512B; - 1024B; when the payload in the + buffer reaches this number has_payload will be asserted */ +#define PXP2_REG_WR_DMAE_MPS 0x1205ec /* [RW 10] if Number of entries in dmae fifo will be higer than this threshold then has_payload indication will be asserted; the default value should be equal to > write MBS size! */ #define PXP2_REG_WR_DMAE_TH 0x120368 +/* [RW 2] 0 - 128B; - 256B; - 512B; - 1024B; when the payload in the + buffer reaches this number has_payload will be asserted */ +#define PXP2_REG_WR_HC_MPS 0x1205c8 +/* [RW 2] 0 - 128B; - 256B; - 512B; - 1024B; when the payload in the + buffer reaches this number has_payload will be asserted */ +#define PXP2_REG_WR_QM_MPS 0x1205dc +/* [RW 1] 0 - working in A0 mode; - working in B0 mode */ +#define PXP2_REG_WR_REV_MODE 0x120670 +/* [RW 2] 0 - 128B; - 256B; - 512B; - 1024B; when the payload in the + buffer reaches this number has_payload will be asserted */ +#define PXP2_REG_WR_SRC_MPS 0x1205e4 +/* [RW 2] 0 - 128B; - 256B; - 512B; - 1024B; when the payload in the + buffer reaches this number has_payload will be asserted */ +#define PXP2_REG_WR_TM_MPS 0x1205e0 +/* [RW 2] 0 - 128B; - 256B; - 512B; - 1024B; when the payload in the + buffer reaches this number has_payload will be asserted */ +#define PXP2_REG_WR_TSDM_MPS 0x1205d4 /* [RW 10] if Number of entries in usdmdp fifo will be higer than this threshold then has_payload indication will be asserted; the default value should be equal to > write MBS size! */ #define PXP2_REG_WR_USDMDP_TH 0x120348 +/* [RW 2] 0 - 128B; - 256B; - 512B; - 1024B; when the payload in the + buffer reaches this number has_payload will be asserted */ +#define PXP2_REG_WR_USDM_MPS 0x1205cc +/* [RW 2] 0 - 128B; - 256B; - 512B; - 1024B; when the payload in the + buffer reaches this number has_payload will be asserted */ +#define PXP2_REG_WR_XSDM_MPS 0x1205d8 /* [R 1] debug only: Indication if PSWHST arbiter is idle */ #define PXP_REG_HST_ARB_IS_IDLE 0x103004 /* [R 8] debug only: A bit mask for all PSWHST arbiter clients. '1' means this client is waiting for the arbiter. */ #define PXP_REG_HST_CLIENTS_WAITING_TO_ARB 0x103008 +/* [R 1] debug only: '1' means this PSWHST is discarding doorbells. This bit + should update accoring to 'hst_discard_doorbells' register when the state + machine is idle */ +#define PXP_REG_HST_DISCARD_DOORBELLS_STATUS 0x1030a0 +/* [R 6] debug only: A bit mask for all PSWHST internal write clients. '1' + means this PSWHST is discarding inputs from this client. Each bit should + update accoring to 'hst_discard_internal_writes' register when the state + machine is idle. */ +#define PXP_REG_HST_DISCARD_INTERNAL_WRITES_STATUS 0x10309c /* [WB 160] Used for initialization of the inbound interrupts memory */ #define PXP_REG_HST_INBOUND_INT 0x103800 /* [RW 32] Interrupt mask register #0 read/write */ @@ -2165,18 +2463,25 @@ #define QM_REG_ACTCTRINITVAL_3 0x16804c /* [RW 32] The base logical address (in bytes) of each physical queue. The index I represents the physical queue number. The 12 lsbs are ignore and - considered zero so practically there are only 20 bits in this register. */ + considered zero so practically there are only 20 bits in this register; + queues 63-0 */ #define QM_REG_BASEADDR 0x168900 /* [RW 16] The byte credit cost for each task. This value is for both ports */ #define QM_REG_BYTECRDCOST 0x168234 /* [RW 16] The initial byte credit value for both ports. */ #define QM_REG_BYTECRDINITVAL 0x168238 /* [RW 32] A bit per physical queue. If the bit is cleared then the physical - queue uses port 0 else it uses port 1. */ + queue uses port 0 else it uses port 1; queues 31-0 */ #define QM_REG_BYTECRDPORT_LSB 0x168228 /* [RW 32] A bit per physical queue. If the bit is cleared then the physical - queue uses port 0 else it uses port 1. */ + queue uses port 0 else it uses port 1; queues 95-64 */ +#define QM_REG_BYTECRDPORT_LSB_EXT_A 0x16e520 +/* [RW 32] A bit per physical queue. If the bit is cleared then the physical + queue uses port 0 else it uses port 1; queues 63-32 */ #define QM_REG_BYTECRDPORT_MSB 0x168224 +/* [RW 32] A bit per physical queue. If the bit is cleared then the physical + queue uses port 0 else it uses port 1; queues 127-96 */ +#define QM_REG_BYTECRDPORT_MSB_EXT_A 0x16e51c /* [RW 16] The byte credit value that if above the QM is considered almost full */ #define QM_REG_BYTECREDITAFULLTHR 0x168094 @@ -2203,7 +2508,7 @@ #define QM_REG_CMINTVOQMASK_6 0x16820c #define QM_REG_CMINTVOQMASK_7 0x168210 /* [RW 20] The number of connections divided by 16 which dictates the size - of each queue per port 0 */ + of each queue which belongs to even function number. */ #define QM_REG_CONNNUM_0 0x168020 /* [R 6] Keep the fill level of the fifo from write client 4 */ #define QM_REG_CQM_WRC_FIFOLVL 0x168018 @@ -2216,74 +2521,179 @@ bypass enable */ #define QM_REG_ENBYPVOQMASK 0x16823c /* [RW 32] A bit mask per each physical queue. If a bit is set then the - physical queue uses the byte credit */ + physical queue uses the byte credit; queues 31-0 */ #define QM_REG_ENBYTECRD_LSB 0x168220 /* [RW 32] A bit mask per each physical queue. If a bit is set then the - physical queue uses the byte credit */ + physical queue uses the byte credit; queues 95-64 */ +#define QM_REG_ENBYTECRD_LSB_EXT_A 0x16e518 +/* [RW 32] A bit mask per each physical queue. If a bit is set then the + physical queue uses the byte credit; queues 63-32 */ #define QM_REG_ENBYTECRD_MSB 0x16821c +/* [RW 32] A bit mask per each physical queue. If a bit is set then the + physical queue uses the byte credit; queues 127-96 */ +#define QM_REG_ENBYTECRD_MSB_EXT_A 0x16e514 /* [RW 4] If cleared then the secondary interface will not be served by the RR arbiter */ #define QM_REG_ENSEC 0x1680f0 -/* [RW 32] A bit vector per each physical queue which selects which function - number to use on PCI access for that queue. */ +/* [RW 32] NA */ #define QM_REG_FUNCNUMSEL_LSB 0x168230 -/* [RW 32] A bit vector per each physical queue which selects which function - number to use on PCI access for that queue. */ +/* [RW 32] NA */ #define QM_REG_FUNCNUMSEL_MSB 0x16822c /* [RW 32] A mask register to mask the Almost empty signals which will not - be use for the almost empty indication to the HW block */ + be use for the almost empty indication to the HW block; queues 31:0 */ #define QM_REG_HWAEMPTYMASK_LSB 0x168218 /* [RW 32] A mask register to mask the Almost empty signals which will not - be use for the almost empty indication to the HW block */ + be use for the almost empty indication to the HW block; queues 95-64 */ +#define QM_REG_HWAEMPTYMASK_LSB_EXT_A 0x16e510 +/* [RW 32] A mask register to mask the Almost empty signals which will not + be use for the almost empty indication to the HW block; queues 63:32 */ #define QM_REG_HWAEMPTYMASK_MSB 0x168214 +/* [RW 32] A mask register to mask the Almost empty signals which will not + be use for the almost empty indication to the HW block; queues 127-96 */ +#define QM_REG_HWAEMPTYMASK_MSB_EXT_A 0x16e50c /* [RW 4] The number of outstanding request to CFC */ #define QM_REG_OUTLDREQ 0x168804 /* [RC 1] A flag to indicate that overflow error occurred in one of the queues. */ #define QM_REG_OVFERROR 0x16805c -/* [RC 6] the Q were the qverflow occurs */ +/* [RC 7] the Q were the qverflow occurs */ #define QM_REG_OVFQNUM 0x168058 -/* [R 32] Pause state for physical queues 31-0 */ +/* [R 16] Pause state for physical queues 15-0 */ #define QM_REG_PAUSESTATE0 0x168410 -/* [R 32] Pause state for physical queues 64-32 */ +/* [R 16] Pause state for physical queues 31-16 */ #define QM_REG_PAUSESTATE1 0x168414 +/* [R 16] Pause state for physical queues 47-32 */ +#define QM_REG_PAUSESTATE2 0x16e684 +/* [R 16] Pause state for physical queues 63-48 */ +#define QM_REG_PAUSESTATE3 0x16e688 +/* [R 16] Pause state for physical queues 79-64 */ +#define QM_REG_PAUSESTATE4 0x16e68c +/* [R 16] Pause state for physical queues 95-80 */ +#define QM_REG_PAUSESTATE5 0x16e690 +/* [R 16] Pause state for physical queues 111-96 */ +#define QM_REG_PAUSESTATE6 0x16e694 +/* [R 16] Pause state for physical queues 127-112 */ +#define QM_REG_PAUSESTATE7 0x16e698 /* [RW 2] The PCI attributes field used in the PCI request. */ #define QM_REG_PCIREQAT 0x168054 /* [R 16] The byte credit of port 0 */ #define QM_REG_PORT0BYTECRD 0x168300 /* [R 16] The byte credit of port 1 */ #define QM_REG_PORT1BYTECRD 0x168304 -/* [WB 54] Pointer Table Memory; The mapping is as follow: ptrtbl[53:30] - read pointer; ptrtbl[29:6] write pointer; ptrtbl[5:4] read bank0; - ptrtbl[3:2] read bank 1; ptrtbl[1:0] write bank; */ +/* [RW 3] pci function number of queues 15-0 */ +#define QM_REG_PQ2PCIFUNC_0 0x16e6bc +#define QM_REG_PQ2PCIFUNC_1 0x16e6c0 +#define QM_REG_PQ2PCIFUNC_2 0x16e6c4 +#define QM_REG_PQ2PCIFUNC_3 0x16e6c8 +#define QM_REG_PQ2PCIFUNC_4 0x16e6cc +#define QM_REG_PQ2PCIFUNC_5 0x16e6d0 +#define QM_REG_PQ2PCIFUNC_6 0x16e6d4 +#define QM_REG_PQ2PCIFUNC_7 0x16e6d8 +/* [WB 54] Pointer Table Memory for queues 63-0; The mapping is as follow: + ptrtbl[53:30] read pointer; ptrtbl[29:6] write pointer; ptrtbl[5:4] read + bank0; ptrtbl[3:2] read bank 1; ptrtbl[1:0] write bank; */ #define QM_REG_PTRTBL 0x168a00 +/* [WB 54] Pointer Table Memory for queues 127-64; The mapping is as follow: + ptrtbl[53:30] read pointer; ptrtbl[29:6] write pointer; ptrtbl[5:4] read + bank0; ptrtbl[3:2] read bank 1; ptrtbl[1:0] write bank; */ +#define QM_REG_PTRTBL_EXT_A 0x16e200 /* [RW 2] Interrupt mask register #0 read/write */ #define QM_REG_QM_INT_MASK 0x168444 /* [R 2] Interrupt register #0 read */ #define QM_REG_QM_INT_STS 0x168438 -/* [RW 9] Parity mask register #0 read/write */ +/* [RW 12] Parity mask register #0 read/write */ #define QM_REG_QM_PRTY_MASK 0x168454 -/* [R 9] Parity register #0 read */ +/* [R 12] Parity register #0 read */ #define QM_REG_QM_PRTY_STS 0x168448 /* [R 32] Current queues in pipeline: Queues from 32 to 63 */ #define QM_REG_QSTATUS_HIGH 0x16802c +/* [R 32] Current queues in pipeline: Queues from 96 to 127 */ +#define QM_REG_QSTATUS_HIGH_EXT_A 0x16e408 /* [R 32] Current queues in pipeline: Queues from 0 to 31 */ #define QM_REG_QSTATUS_LOW 0x168028 -/* [R 24] The number of tasks queued for each queue */ +/* [R 32] Current queues in pipeline: Queues from 64 to 95 */ +#define QM_REG_QSTATUS_LOW_EXT_A 0x16e404 +/* [R 24] The number of tasks queued for each queue; queues 63-0 */ #define QM_REG_QTASKCTR_0 0x168308 +/* [R 24] The number of tasks queued for each queue; queues 127-64 */ +#define QM_REG_QTASKCTR_EXT_A_0 0x16e584 /* [RW 4] Queue tied to VOQ */ #define QM_REG_QVOQIDX_0 0x1680f4 #define QM_REG_QVOQIDX_10 0x16811c +#define QM_REG_QVOQIDX_100 0x16e49c +#define QM_REG_QVOQIDX_101 0x16e4a0 +#define QM_REG_QVOQIDX_102 0x16e4a4 +#define QM_REG_QVOQIDX_103 0x16e4a8 +#define QM_REG_QVOQIDX_104 0x16e4ac +#define QM_REG_QVOQIDX_105 0x16e4b0 +#define QM_REG_QVOQIDX_106 0x16e4b4 +#define QM_REG_QVOQIDX_107 0x16e4b8 +#define QM_REG_QVOQIDX_108 0x16e4bc +#define QM_REG_QVOQIDX_109 0x16e4c0 +#define QM_REG_QVOQIDX_100 0x16e49c +#define QM_REG_QVOQIDX_101 0x16e4a0 +#define QM_REG_QVOQIDX_102 0x16e4a4 +#define QM_REG_QVOQIDX_103 0x16e4a8 +#define QM_REG_QVOQIDX_104 0x16e4ac +#define QM_REG_QVOQIDX_105 0x16e4b0 +#define QM_REG_QVOQIDX_106 0x16e4b4 +#define QM_REG_QVOQIDX_107 0x16e4b8 +#define QM_REG_QVOQIDX_108 0x16e4bc +#define QM_REG_QVOQIDX_109 0x16e4c0 #define QM_REG_QVOQIDX_11 0x168120 +#define QM_REG_QVOQIDX_110 0x16e4c4 +#define QM_REG_QVOQIDX_111 0x16e4c8 +#define QM_REG_QVOQIDX_112 0x16e4cc +#define QM_REG_QVOQIDX_113 0x16e4d0 +#define QM_REG_QVOQIDX_114 0x16e4d4 +#define QM_REG_QVOQIDX_115 0x16e4d8 +#define QM_REG_QVOQIDX_116 0x16e4dc +#define QM_REG_QVOQIDX_117 0x16e4e0 +#define QM_REG_QVOQIDX_118 0x16e4e4 +#define QM_REG_QVOQIDX_119 0x16e4e8 +#define QM_REG_QVOQIDX_110 0x16e4c4 +#define QM_REG_QVOQIDX_111 0x16e4c8 +#define QM_REG_QVOQIDX_112 0x16e4cc +#define QM_REG_QVOQIDX_113 0x16e4d0 +#define QM_REG_QVOQIDX_114 0x16e4d4 +#define QM_REG_QVOQIDX_115 0x16e4d8 +#define QM_REG_QVOQIDX_116 0x16e4dc +#define QM_REG_QVOQIDX_117 0x16e4e0 +#define QM_REG_QVOQIDX_118 0x16e4e4 +#define QM_REG_QVOQIDX_119 0x16e4e8 #define QM_REG_QVOQIDX_12 0x168124 +#define QM_REG_QVOQIDX_120 0x16e4ec +#define QM_REG_QVOQIDX_121 0x16e4f0 +#define QM_REG_QVOQIDX_122 0x16e4f4 +#define QM_REG_QVOQIDX_123 0x16e4f8 +#define QM_REG_QVOQIDX_124 0x16e4fc +#define QM_REG_QVOQIDX_125 0x16e500 +#define QM_REG_QVOQIDX_126 0x16e504 +#define QM_REG_QVOQIDX_127 0x16e508 +#define QM_REG_QVOQIDX_120 0x16e4ec +#define QM_REG_QVOQIDX_121 0x16e4f0 +#define QM_REG_QVOQIDX_122 0x16e4f4 +#define QM_REG_QVOQIDX_123 0x16e4f8 +#define QM_REG_QVOQIDX_124 0x16e4fc +#define QM_REG_QVOQIDX_125 0x16e500 +#define QM_REG_QVOQIDX_126 0x16e504 +#define QM_REG_QVOQIDX_127 0x16e508 #define QM_REG_QVOQIDX_13 0x168128 #define QM_REG_QVOQIDX_14 0x16812c #define QM_REG_QVOQIDX_15 0x168130 #define QM_REG_QVOQIDX_16 0x168134 #define QM_REG_QVOQIDX_17 0x168138 #define QM_REG_QVOQIDX_21 0x168148 +#define QM_REG_QVOQIDX_22 0x16814c +#define QM_REG_QVOQIDX_23 0x168150 +#define QM_REG_QVOQIDX_24 0x168154 #define QM_REG_QVOQIDX_25 0x168158 +#define QM_REG_QVOQIDX_26 0x16815c +#define QM_REG_QVOQIDX_27 0x168160 +#define QM_REG_QVOQIDX_28 0x168164 #define QM_REG_QVOQIDX_29 0x168168 +#define QM_REG_QVOQIDX_30 0x16816c +#define QM_REG_QVOQIDX_31 0x168170 #define QM_REG_QVOQIDX_32 0x168174 #define QM_REG_QVOQIDX_33 0x168178 #define QM_REG_QVOQIDX_34 0x16817c @@ -2328,17 +2738,95 @@ #define QM_REG_QVOQIDX_61 0x1681e8 #define QM_REG_QVOQIDX_62 0x1681ec #define QM_REG_QVOQIDX_63 0x1681f0 +#define QM_REG_QVOQIDX_64 0x16e40c +#define QM_REG_QVOQIDX_65 0x16e410 +#define QM_REG_QVOQIDX_66 0x16e414 +#define QM_REG_QVOQIDX_67 0x16e418 +#define QM_REG_QVOQIDX_68 0x16e41c +#define QM_REG_QVOQIDX_69 0x16e420 #define QM_REG_QVOQIDX_60 0x1681e4 #define QM_REG_QVOQIDX_61 0x1681e8 #define QM_REG_QVOQIDX_62 0x1681ec #define QM_REG_QVOQIDX_63 0x1681f0 +#define QM_REG_QVOQIDX_64 0x16e40c +#define QM_REG_QVOQIDX_65 0x16e410 +#define QM_REG_QVOQIDX_69 0x16e420 #define QM_REG_QVOQIDX_7 0x168110 +#define QM_REG_QVOQIDX_70 0x16e424 +#define QM_REG_QVOQIDX_71 0x16e428 +#define QM_REG_QVOQIDX_72 0x16e42c +#define QM_REG_QVOQIDX_73 0x16e430 +#define QM_REG_QVOQIDX_74 0x16e434 +#define QM_REG_QVOQIDX_75 0x16e438 +#define QM_REG_QVOQIDX_76 0x16e43c +#define QM_REG_QVOQIDX_77 0x16e440 +#define QM_REG_QVOQIDX_78 0x16e444 +#define QM_REG_QVOQIDX_79 0x16e448 +#define QM_REG_QVOQIDX_70 0x16e424 +#define QM_REG_QVOQIDX_71 0x16e428 +#define QM_REG_QVOQIDX_72 0x16e42c +#define QM_REG_QVOQIDX_73 0x16e430 +#define QM_REG_QVOQIDX_74 0x16e434 +#define QM_REG_QVOQIDX_75 0x16e438 +#define QM_REG_QVOQIDX_76 0x16e43c +#define QM_REG_QVOQIDX_77 0x16e440 +#define QM_REG_QVOQIDX_78 0x16e444 +#define QM_REG_QVOQIDX_79 0x16e448 #define QM_REG_QVOQIDX_8 0x168114 +#define QM_REG_QVOQIDX_80 0x16e44c +#define QM_REG_QVOQIDX_81 0x16e450 +#define QM_REG_QVOQIDX_82 0x16e454 +#define QM_REG_QVOQIDX_83 0x16e458 +#define QM_REG_QVOQIDX_84 0x16e45c +#define QM_REG_QVOQIDX_85 0x16e460 +#define QM_REG_QVOQIDX_86 0x16e464 +#define QM_REG_QVOQIDX_87 0x16e468 +#define QM_REG_QVOQIDX_88 0x16e46c +#define QM_REG_QVOQIDX_89 0x16e470 +#define QM_REG_QVOQIDX_80 0x16e44c +#define QM_REG_QVOQIDX_81 0x16e450 +#define QM_REG_QVOQIDX_85 0x16e460 +#define QM_REG_QVOQIDX_86 0x16e464 +#define QM_REG_QVOQIDX_87 0x16e468 +#define QM_REG_QVOQIDX_88 0x16e46c +#define QM_REG_QVOQIDX_89 0x16e470 #define QM_REG_QVOQIDX_9 0x168118 -/* [R 24] Remaining pause timeout for port 0 */ +#define QM_REG_QVOQIDX_90 0x16e474 +#define QM_REG_QVOQIDX_91 0x16e478 +#define QM_REG_QVOQIDX_92 0x16e47c +#define QM_REG_QVOQIDX_93 0x16e480 +#define QM_REG_QVOQIDX_94 0x16e484 +#define QM_REG_QVOQIDX_95 0x16e488 +#define QM_REG_QVOQIDX_96 0x16e48c +#define QM_REG_QVOQIDX_97 0x16e490 +#define QM_REG_QVOQIDX_98 0x16e494 +#define QM_REG_QVOQIDX_99 0x16e498 +#define QM_REG_QVOQIDX_90 0x16e474 +#define QM_REG_QVOQIDX_91 0x16e478 +#define QM_REG_QVOQIDX_92 0x16e47c +#define QM_REG_QVOQIDX_93 0x16e480 +#define QM_REG_QVOQIDX_94 0x16e484 +#define QM_REG_QVOQIDX_95 0x16e488 +#define QM_REG_QVOQIDX_96 0x16e48c +#define QM_REG_QVOQIDX_97 0x16e490 +#define QM_REG_QVOQIDX_98 0x16e494 +#define QM_REG_QVOQIDX_99 0x16e498 +/* [R 24] Remaining pause timeout for queues 15-0 */ #define QM_REG_REMAINPAUSETM0 0x168418 -/* [R 24] Remaining pause timeout for port 1 */ +/* [R 24] Remaining pause timeout for queues 31-16 */ #define QM_REG_REMAINPAUSETM1 0x16841c +/* [R 24] Remaining pause timeout for queues 47-32 */ +#define QM_REG_REMAINPAUSETM2 0x16e69c +/* [R 24] Remaining pause timeout for queues 63-48 */ +#define QM_REG_REMAINPAUSETM3 0x16e6a0 +/* [R 24] Remaining pause timeout for queues 79-64 */ +#define QM_REG_REMAINPAUSETM4 0x16e6a4 +/* [R 24] Remaining pause timeout for queues 95-80 */ +#define QM_REG_REMAINPAUSETM5 0x16e6a8 +/* [R 24] Remaining pause timeout for queues 111-96 */ +#define QM_REG_REMAINPAUSETM6 0x16e6ac +/* [R 24] Remaining pause timeout for queues 127-112 */ +#define QM_REG_REMAINPAUSETM7 0x16e6b0 /* [RW 1] Initialization bit command */ #define QM_REG_SOFT_RESET 0x168428 /* [RW 8] The credit cost per every task in the QM. A value per each VOQ */ @@ -2372,44 +2860,103 @@ #define QM_REG_VOQINITCREDIT_4 0x168070 #define QM_REG_VOQINITCREDIT_5 0x168074 /* [RW 1] The port of which VOQ belongs */ +#define QM_REG_VOQPORT_0 0x1682a0 #define QM_REG_VOQPORT_1 0x1682a4 #define QM_REG_VOQPORT_10 0x1682c8 #define QM_REG_VOQPORT_11 0x1682cc #define QM_REG_VOQPORT_2 0x1682a8 -/* [RW 32] The physical queue number associated with each VOQ */ +/* [RW 32] The physical queue number associated with each VOQ; queues 31-0 */ #define QM_REG_VOQQMASK_0_LSB 0x168240 -/* [RW 32] The physical queue number associated with each VOQ */ +/* [RW 32] The physical queue number associated with each VOQ; queues 95-64 */ +#define QM_REG_VOQQMASK_0_LSB_EXT_A 0x16e524 +/* [RW 32] The physical queue number associated with each VOQ; queues 63-32 */ #define QM_REG_VOQQMASK_0_MSB 0x168244 -/* [RW 32] The physical queue number associated with each VOQ */ +/* [RW 32] The physical queue number associated with each VOQ; queues 127-96 */ +#define QM_REG_VOQQMASK_0_MSB_EXT_A 0x16e528 +/* [RW 32] The physical queue number associated with each VOQ; queues 31-0 */ +#define QM_REG_VOQQMASK_10_LSB 0x168290 +/* [RW 32] The physical queue number associated with each VOQ; queues 95-64 */ +#define QM_REG_VOQQMASK_10_LSB_EXT_A 0x16e574 +/* [RW 32] The physical queue number associated with each VOQ; queues 63-32 */ +#define QM_REG_VOQQMASK_10_MSB 0x168294 +/* [RW 32] The physical queue number associated with each VOQ; queues 127-96 */ +#define QM_REG_VOQQMASK_10_MSB_EXT_A 0x16e578 +/* [RW 32] The physical queue number associated with each VOQ; queues 31-0 */ +#define QM_REG_VOQQMASK_11_LSB 0x168298 +/* [RW 32] The physical queue number associated with each VOQ; queues 95-64 */ +#define QM_REG_VOQQMASK_11_LSB_EXT_A 0x16e57c +/* [RW 32] The physical queue number associated with each VOQ; queues 63-32 */ +#define QM_REG_VOQQMASK_11_MSB 0x16829c +/* [RW 32] The physical queue number associated with each VOQ; queues 127-96 */ +#define QM_REG_VOQQMASK_11_MSB_EXT_A 0x16e580 +/* [RW 32] The physical queue number associated with each VOQ; queues 31-0 */ +#define QM_REG_VOQQMASK_1_LSB 0x168248 +/* [RW 32] The physical queue number associated with each VOQ; queues 95-64 */ +#define QM_REG_VOQQMASK_1_LSB_EXT_A 0x16e52c +/* [RW 32] The physical queue number associated with each VOQ; queues 63-32 */ #define QM_REG_VOQQMASK_1_MSB 0x16824c -/* [RW 32] The physical queue number associated with each VOQ */ +/* [RW 32] The physical queue number associated with each VOQ; queues 127-96 */ +#define QM_REG_VOQQMASK_1_MSB_EXT_A 0x16e530 +/* [RW 32] The physical queue number associated with each VOQ; queues 31-0 */ #define QM_REG_VOQQMASK_2_LSB 0x168250 -/* [RW 32] The physical queue number associated with each VOQ */ +/* [RW 32] The physical queue number associated with each VOQ; queues 95-64 */ +#define QM_REG_VOQQMASK_2_LSB_EXT_A 0x16e534 +/* [RW 32] The physical queue number associated with each VOQ; queues 63-32 */ #define QM_REG_VOQQMASK_2_MSB 0x168254 -/* [RW 32] The physical queue number associated with each VOQ */ +/* [RW 32] The physical queue number associated with each VOQ; queues 127-96 */ +#define QM_REG_VOQQMASK_2_MSB_EXT_A 0x16e538 +/* [RW 32] The physical queue number associated with each VOQ; queues 31-0 */ #define QM_REG_VOQQMASK_3_LSB 0x168258 -/* [RW 32] The physical queue number associated with each VOQ */ +/* [RW 32] The physical queue number associated with each VOQ; queues 95-64 */ +#define QM_REG_VOQQMASK_3_LSB_EXT_A 0x16e53c +/* [RW 32] The physical queue number associated with each VOQ; queues 127-96 */ +#define QM_REG_VOQQMASK_3_MSB_EXT_A 0x16e540 +/* [RW 32] The physical queue number associated with each VOQ; queues 31-0 */ #define QM_REG_VOQQMASK_4_LSB 0x168260 -/* [RW 32] The physical queue number associated with each VOQ */ +/* [RW 32] The physical queue number associated with each VOQ; queues 95-64 */ +#define QM_REG_VOQQMASK_4_LSB_EXT_A 0x16e544 +/* [RW 32] The physical queue number associated with each VOQ; queues 63-32 */ #define QM_REG_VOQQMASK_4_MSB 0x168264 -/* [RW 32] The physical queue number associated with each VOQ */ +/* [RW 32] The physical queue number associated with each VOQ; queues 127-96 */ +#define QM_REG_VOQQMASK_4_MSB_EXT_A 0x16e548 +/* [RW 32] The physical queue number associated with each VOQ; queues 31-0 */ #define QM_REG_VOQQMASK_5_LSB 0x168268 -/* [RW 32] The physical queue number associated with each VOQ */ +/* [RW 32] The physical queue number associated with each VOQ; queues 95-64 */ +#define QM_REG_VOQQMASK_5_LSB_EXT_A 0x16e54c +/* [RW 32] The physical queue number associated with each VOQ; queues 63-32 */ #define QM_REG_VOQQMASK_5_MSB 0x16826c -/* [RW 32] The physical queue number associated with each VOQ */ +/* [RW 32] The physical queue number associated with each VOQ; queues 127-96 */ +#define QM_REG_VOQQMASK_5_MSB_EXT_A 0x16e550 +/* [RW 32] The physical queue number associated with each VOQ; queues 31-0 */ #define QM_REG_VOQQMASK_6_LSB 0x168270 -/* [RW 32] The physical queue number associated with each VOQ */ +/* [RW 32] The physical queue number associated with each VOQ; queues 95-64 */ +#define QM_REG_VOQQMASK_6_LSB_EXT_A 0x16e554 +/* [RW 32] The physical queue number associated with each VOQ; queues 63-32 */ #define QM_REG_VOQQMASK_6_MSB 0x168274 -/* [RW 32] The physical queue number associated with each VOQ */ +/* [RW 32] The physical queue number associated with each VOQ; queues 127-96 */ +#define QM_REG_VOQQMASK_6_MSB_EXT_A 0x16e558 +/* [RW 32] The physical queue number associated with each VOQ; queues 31-0 */ #define QM_REG_VOQQMASK_7_LSB 0x168278 -/* [RW 32] The physical queue number associated with each VOQ */ +/* [RW 32] The physical queue number associated with each VOQ; queues 95-64 */ +#define QM_REG_VOQQMASK_7_LSB_EXT_A 0x16e55c +/* [RW 32] The physical queue number associated with each VOQ; queues 63-32 */ #define QM_REG_VOQQMASK_7_MSB 0x16827c -/* [RW 32] The physical queue number associated with each VOQ */ +/* [RW 32] The physical queue number associated with each VOQ; queues 127-96 */ +#define QM_REG_VOQQMASK_7_MSB_EXT_A 0x16e560 +/* [RW 32] The physical queue number associated with each VOQ; queues 31-0 */ #define QM_REG_VOQQMASK_8_LSB 0x168280 -/* [RW 32] The physical queue number associated with each VOQ */ +/* [RW 32] The physical queue number associated with each VOQ; queues 95-64 */ +#define QM_REG_VOQQMASK_8_LSB_EXT_A 0x16e564 +/* [RW 32] The physical queue number associated with each VOQ; queues 63-32 */ #define QM_REG_VOQQMASK_8_MSB 0x168284 -/* [RW 32] The physical queue number associated with each VOQ */ +/* [RW 32] The physical queue number associated with each VOQ; queues 127-96 */ +#define QM_REG_VOQQMASK_8_MSB_EXT_A 0x16e568 +/* [RW 32] The physical queue number associated with each VOQ; queues 31-0 */ #define QM_REG_VOQQMASK_9_LSB 0x168288 +/* [RW 32] The physical queue number associated with each VOQ; queues 95-64 */ +#define QM_REG_VOQQMASK_9_LSB_EXT_A 0x16e56c +/* [RW 32] The physical queue number associated with each VOQ; queues 127-96 */ +#define QM_REG_VOQQMASK_9_MSB_EXT_A 0x16e570 /* [RW 32] Wrr weights */ #define QM_REG_WRRWEIGHTS_0 0x16880c #define QM_REG_WRRWEIGHTS_1 0x168810 @@ -2431,14 +2978,78 @@ #define QM_REG_WRRWEIGHTS_15 0x168828 #define QM_REG_WRRWEIGHTS_15_SIZE 1 /* [RW 32] Wrr weights */ +#define QM_REG_WRRWEIGHTS_16 0x16e000 +#define QM_REG_WRRWEIGHTS_16_SIZE 1 +/* [RW 32] Wrr weights */ +#define QM_REG_WRRWEIGHTS_17 0x16e004 +#define QM_REG_WRRWEIGHTS_17_SIZE 1 +/* [RW 32] Wrr weights */ +#define QM_REG_WRRWEIGHTS_18 0x16e008 +#define QM_REG_WRRWEIGHTS_18_SIZE 1 +/* [RW 32] Wrr weights */ +#define QM_REG_WRRWEIGHTS_19 0x16e00c +#define QM_REG_WRRWEIGHTS_19_SIZE 1 +/* [RW 32] Wrr weights */ #define QM_REG_WRRWEIGHTS_10 0x168814 #define QM_REG_WRRWEIGHTS_11 0x168818 #define QM_REG_WRRWEIGHTS_12 0x16881c #define QM_REG_WRRWEIGHTS_13 0x168820 #define QM_REG_WRRWEIGHTS_14 0x168824 #define QM_REG_WRRWEIGHTS_15 0x168828 +#define QM_REG_WRRWEIGHTS_16 0x16e000 +#define QM_REG_WRRWEIGHTS_17 0x16e004 +#define QM_REG_WRRWEIGHTS_18 0x16e008 +#define QM_REG_WRRWEIGHTS_19 0x16e00c #define QM_REG_WRRWEIGHTS_2 0x16882c +#define QM_REG_WRRWEIGHTS_20 0x16e010 +#define QM_REG_WRRWEIGHTS_20_SIZE 1 +/* [RW 32] Wrr weights */ +#define QM_REG_WRRWEIGHTS_21 0x16e014 +#define QM_REG_WRRWEIGHTS_21_SIZE 1 +/* [RW 32] Wrr weights */ +#define QM_REG_WRRWEIGHTS_22 0x16e018 +#define QM_REG_WRRWEIGHTS_22_SIZE 1 +/* [RW 32] Wrr weights */ +#define QM_REG_WRRWEIGHTS_23 0x16e01c +#define QM_REG_WRRWEIGHTS_23_SIZE 1 +/* [RW 32] Wrr weights */ +#define QM_REG_WRRWEIGHTS_24 0x16e020 +#define QM_REG_WRRWEIGHTS_24_SIZE 1 +/* [RW 32] Wrr weights */ +#define QM_REG_WRRWEIGHTS_25 0x16e024 +#define QM_REG_WRRWEIGHTS_25_SIZE 1 +/* [RW 32] Wrr weights */ +#define QM_REG_WRRWEIGHTS_26 0x16e028 +#define QM_REG_WRRWEIGHTS_26_SIZE 1 +/* [RW 32] Wrr weights */ +#define QM_REG_WRRWEIGHTS_27 0x16e02c +#define QM_REG_WRRWEIGHTS_27_SIZE 1 +/* [RW 32] Wrr weights */ +#define QM_REG_WRRWEIGHTS_28 0x16e030 +#define QM_REG_WRRWEIGHTS_28_SIZE 1 +/* [RW 32] Wrr weights */ +#define QM_REG_WRRWEIGHTS_29 0x16e034 +#define QM_REG_WRRWEIGHTS_29_SIZE 1 +/* [RW 32] Wrr weights */ +#define QM_REG_WRRWEIGHTS_20 0x16e010 +#define QM_REG_WRRWEIGHTS_21 0x16e014 +#define QM_REG_WRRWEIGHTS_22 0x16e018 +#define QM_REG_WRRWEIGHTS_23 0x16e01c +#define QM_REG_WRRWEIGHTS_24 0x16e020 +#define QM_REG_WRRWEIGHTS_25 0x16e024 +#define QM_REG_WRRWEIGHTS_26 0x16e028 +#define QM_REG_WRRWEIGHTS_27 0x16e02c +#define QM_REG_WRRWEIGHTS_28 0x16e030 +#define QM_REG_WRRWEIGHTS_29 0x16e034 #define QM_REG_WRRWEIGHTS_3 0x168830 +#define QM_REG_WRRWEIGHTS_30 0x16e038 +#define QM_REG_WRRWEIGHTS_30_SIZE 1 +/* [RW 32] Wrr weights */ +#define QM_REG_WRRWEIGHTS_31 0x16e03c +#define QM_REG_WRRWEIGHTS_31_SIZE 1 +/* [RW 32] Wrr weights */ +#define QM_REG_WRRWEIGHTS_30 0x16e038 +#define QM_REG_WRRWEIGHTS_31 0x16e03c #define QM_REG_WRRWEIGHTS_4 0x168834 #define QM_REG_WRRWEIGHTS_5 0x168838 #define QM_REG_WRRWEIGHTS_6 0x16883c @@ -2447,6 +3058,70 @@ #define QM_REG_WRRWEIGHTS_9 0x168848 /* [R 6] Keep the fill level of the fifo from write client 1 */ #define QM_REG_XQM_WRC_FIFOLVL 0x168000 +#define BRB1_BRB1_INT_STS_REG_ADDRESS_ERROR (0x1<<0) +#define BRB1_BRB1_INT_STS_REG_ADDRESS_ERROR_SIZE 0 +#define BRB1_BRB1_INT_STS_CLR_REG_ADDRESS_ERROR (0x1<<0) +#define BRB1_BRB1_INT_STS_CLR_REG_ADDRESS_ERROR_SIZE 0 +#define BRB1_BRB1_INT_STS_WR_REG_ADDRESS_ERROR (0x1<<0) +#define BRB1_BRB1_INT_STS_WR_REG_ADDRESS_ERROR_SIZE 0 +#define BRB1_BRB1_INT_MASK_REG_ADDRESS_ERROR (0x1<<0) +#define BRB1_BRB1_INT_MASK_REG_ADDRESS_ERROR_SIZE 0 +#define CCM_CCM_INT_STS_REG_ADDRESS_ERROR (0x1<<0) +#define CCM_CCM_INT_STS_REG_ADDRESS_ERROR_SIZE 0 +#define CCM_CCM_INT_STS_CLR_REG_ADDRESS_ERROR (0x1<<0) +#define CCM_CCM_INT_STS_CLR_REG_ADDRESS_ERROR_SIZE 0 +#define CCM_CCM_INT_STS_WR_REG_ADDRESS_ERROR (0x1<<0) +#define CCM_CCM_INT_STS_WR_REG_ADDRESS_ERROR_SIZE 0 +#define CCM_CCM_INT_MASK_REG_ADDRESS_ERROR (0x1<<0) +#define CCM_CCM_INT_MASK_REG_ADDRESS_ERROR_SIZE 0 +#define CDU_CDU_INT_STS_REG_ADDRESS_ERROR (0x1<<0) +#define CDU_CDU_INT_STS_REG_ADDRESS_ERROR_SIZE 0 +#define CDU_CDU_INT_STS_CLR_REG_ADDRESS_ERROR (0x1<<0) +#define CDU_CDU_INT_STS_CLR_REG_ADDRESS_ERROR_SIZE 0 +#define CDU_CDU_INT_STS_WR_REG_ADDRESS_ERROR (0x1<<0) +#define CDU_CDU_INT_STS_WR_REG_ADDRESS_ERROR_SIZE 0 +#define CDU_CDU_INT_MASK_REG_ADDRESS_ERROR (0x1<<0) +#define CDU_CDU_INT_MASK_REG_ADDRESS_ERROR_SIZE 0 +#define CFC_CFC_INT_STS_REG_ADDRESS_ERROR (0x1<<0) +#define CFC_CFC_INT_STS_REG_ADDRESS_ERROR_SIZE 0 +#define CFC_CFC_INT_STS_CLR_REG_ADDRESS_ERROR (0x1<<0) +#define CFC_CFC_INT_STS_CLR_REG_ADDRESS_ERROR_SIZE 0 +#define CFC_CFC_INT_STS_WR_REG_ADDRESS_ERROR (0x1<<0) +#define CFC_CFC_INT_STS_WR_REG_ADDRESS_ERROR_SIZE 0 +#define CFC_CFC_INT_MASK_REG_ADDRESS_ERROR (0x1<<0) +#define CFC_CFC_INT_MASK_REG_ADDRESS_ERROR_SIZE 0 +#define CSDM_CSDM_INT_STS_0_REG_ADDRESS_ERROR (0x1<<0) +#define CSDM_CSDM_INT_STS_0_REG_ADDRESS_ERROR_SIZE 0 +#define CSDM_CSDM_INT_STS_CLR_0_REG_ADDRESS_ERROR (0x1<<0) +#define CSDM_CSDM_INT_STS_CLR_0_REG_ADDRESS_ERROR_SIZE 0 +#define CSDM_CSDM_INT_STS_WR_0_REG_ADDRESS_ERROR (0x1<<0) +#define CSDM_CSDM_INT_STS_WR_0_REG_ADDRESS_ERROR_SIZE 0 +#define CSDM_CSDM_INT_MASK_0_REG_ADDRESS_ERROR (0x1<<0) +#define CSDM_CSDM_INT_MASK_0_REG_ADDRESS_ERROR_SIZE 0 +#define CSEM_CSEM_INT_STS_0_REG_ADDRESS_ERROR (0x1<<0) +#define CSEM_CSEM_INT_STS_0_REG_ADDRESS_ERROR_SIZE 0 +#define CSEM_CSEM_INT_STS_CLR_0_REG_ADDRESS_ERROR (0x1<<0) +#define CSEM_CSEM_INT_STS_CLR_0_REG_ADDRESS_ERROR_SIZE 0 +#define CSEM_CSEM_INT_STS_WR_0_REG_ADDRESS_ERROR (0x1<<0) +#define CSEM_CSEM_INT_STS_WR_0_REG_ADDRESS_ERROR_SIZE 0 +#define CSEM_CSEM_INT_MASK_0_REG_ADDRESS_ERROR (0x1<<0) +#define CSEM_CSEM_INT_MASK_0_REG_ADDRESS_ERROR_SIZE 0 +#define DBG_DBG_INT_STS_REG_ADDRESS_ERROR (0x1<<0) +#define DBG_DBG_INT_STS_REG_ADDRESS_ERROR_SIZE 0 +#define DBG_DBG_INT_STS_CLR_REG_ADDRESS_ERROR (0x1<<0) +#define DBG_DBG_INT_STS_CLR_REG_ADDRESS_ERROR_SIZE 0 +#define DBG_DBG_INT_STS_WR_REG_ADDRESS_ERROR (0x1<<0) +#define DBG_DBG_INT_STS_WR_REG_ADDRESS_ERROR_SIZE 0 +#define DBG_DBG_INT_MASK_REG_ADDRESS_ERROR (0x1<<0) +#define DBG_DBG_INT_MASK_REG_ADDRESS_ERROR_SIZE 0 +#define DMAE_DMAE_INT_STS_REG_ADDRESS_ERROR (0x1<<0) +#define DMAE_DMAE_INT_STS_REG_ADDRESS_ERROR_SIZE 0 +#define DMAE_DMAE_INT_STS_CLR_REG_ADDRESS_ERROR (0x1<<0) +#define DMAE_DMAE_INT_STS_CLR_REG_ADDRESS_ERROR_SIZE 0 +#define DMAE_DMAE_INT_STS_WR_REG_ADDRESS_ERROR (0x1<<0) +#define DMAE_DMAE_INT_STS_WR_REG_ADDRESS_ERROR_SIZE 0 +#define DMAE_DMAE_INT_MASK_REG_ADDRESS_ERROR (0x1<<0) +#define DMAE_DMAE_INT_MASK_REG_ADDRESS_ERROR_SIZE 0 #define DORQ_DORQ_INT_STS_REG_ADDRESS_ERROR (0x1<<0) #define DORQ_DORQ_INT_STS_REG_ADDRESS_ERROR_SIZE 0 #define DORQ_DORQ_INT_STS_CLR_REG_ADDRESS_ERROR (0x1<<0) @@ -2455,6 +3130,22 @@ #define DORQ_DORQ_INT_STS_WR_REG_ADDRESS_ERROR_SIZE 0 #define DORQ_DORQ_INT_MASK_REG_ADDRESS_ERROR (0x1<<0) #define DORQ_DORQ_INT_MASK_REG_ADDRESS_ERROR_SIZE 0 +#define HC_HC_INT_STS_REG_ADDRESS_ERROR (0x1<<0) +#define HC_HC_INT_STS_REG_ADDRESS_ERROR_SIZE 0 +#define HC_HC_INT_STS_CLR_REG_ADDRESS_ERROR (0x1<<0) +#define HC_HC_INT_STS_CLR_REG_ADDRESS_ERROR_SIZE 0 +#define HC_HC_INT_STS_WR_REG_ADDRESS_ERROR (0x1<<0) +#define HC_HC_INT_STS_WR_REG_ADDRESS_ERROR_SIZE 0 +#define HC_HC_INT_MASK_REG_ADDRESS_ERROR (0x1<<0) +#define HC_HC_INT_MASK_REG_ADDRESS_ERROR_SIZE 0 +#define MISC_MISC_INT_STS_REG_ADDRESS_ERROR (0x1<<0) +#define MISC_MISC_INT_STS_REG_ADDRESS_ERROR_SIZE 0 +#define MISC_MISC_INT_STS_CLR_REG_ADDRESS_ERROR (0x1<<0) +#define MISC_MISC_INT_STS_CLR_REG_ADDRESS_ERROR_SIZE 0 +#define MISC_MISC_INT_STS_WR_REG_ADDRESS_ERROR (0x1<<0) +#define MISC_MISC_INT_STS_WR_REG_ADDRESS_ERROR_SIZE 0 +#define MISC_MISC_INT_MASK_REG_ADDRESS_ERROR (0x1<<0) +#define MISC_MISC_INT_MASK_REG_ADDRESS_ERROR_SIZE 0 #define NIG_NIG_INT_STS_0_REG_ADDRESS_ERROR (0x1<<0) #define NIG_NIG_INT_STS_0_REG_ADDRESS_ERROR_SIZE 0 #define NIG_NIG_INT_STS_CLR_0_REG_ADDRESS_ERROR (0x1<<0) @@ -2463,6 +3154,70 @@ #define NIG_NIG_INT_STS_WR_0_REG_ADDRESS_ERROR_SIZE 0 #define NIG_NIG_INT_MASK_0_REG_ADDRESS_ERROR (0x1<<0) #define NIG_NIG_INT_MASK_0_REG_ADDRESS_ERROR_SIZE 0 +#define PBF_PBF_INT_STS_REG_ADDRESS_ERROR (0x1<<0) +#define PBF_PBF_INT_STS_REG_ADDRESS_ERROR_SIZE 0 +#define PBF_PBF_INT_STS_CLR_REG_ADDRESS_ERROR (0x1<<0) +#define PBF_PBF_INT_STS_CLR_REG_ADDRESS_ERROR_SIZE 0 +#define PBF_PBF_INT_STS_WR_REG_ADDRESS_ERROR (0x1<<0) +#define PBF_PBF_INT_STS_WR_REG_ADDRESS_ERROR_SIZE 0 +#define PBF_PBF_INT_MASK_REG_ADDRESS_ERROR (0x1<<0) +#define PBF_PBF_INT_MASK_REG_ADDRESS_ERROR_SIZE 0 +#define PB_PB_INT_STS_REG_ADDRESS_ERROR (0x1<<0) +#define PB_PB_INT_STS_REG_ADDRESS_ERROR_SIZE 0 +#define PB_PB_INT_STS_CLR_REG_ADDRESS_ERROR (0x1<<0) +#define PB_PB_INT_STS_CLR_REG_ADDRESS_ERROR_SIZE 0 +#define PB_PB_INT_STS_WR_REG_ADDRESS_ERROR (0x1<<0) +#define PB_PB_INT_STS_WR_REG_ADDRESS_ERROR_SIZE 0 +#define PB_PB_INT_MASK_REG_ADDRESS_ERROR (0x1<<0) +#define PB_PB_INT_MASK_REG_ADDRESS_ERROR_SIZE 0 +#define PRS_PRS_INT_STS_REG_ADDRESS_ERROR (0x1<<0) +#define PRS_PRS_INT_STS_REG_ADDRESS_ERROR_SIZE 0 +#define PRS_PRS_INT_STS_CLR_REG_ADDRESS_ERROR (0x1<<0) +#define PRS_PRS_INT_STS_CLR_REG_ADDRESS_ERROR_SIZE 0 +#define PRS_PRS_INT_STS_WR_REG_ADDRESS_ERROR (0x1<<0) +#define PRS_PRS_INT_STS_WR_REG_ADDRESS_ERROR_SIZE 0 +#define PRS_PRS_INT_MASK_REG_ADDRESS_ERROR (0x1<<0) +#define PRS_PRS_INT_MASK_REG_ADDRESS_ERROR_SIZE 0 +#define PXP2_PXP2_INT_STS_0_REG_ADDRESS_ERROR (0x1<<0) +#define PXP2_PXP2_INT_STS_0_REG_ADDRESS_ERROR_SIZE 0 +#define PXP2_PXP2_INT_STS_CLR_0_REG_ADDRESS_ERROR (0x1<<0) +#define PXP2_PXP2_INT_STS_CLR_0_REG_ADDRESS_ERROR_SIZE 0 +#define PXP2_PXP2_INT_STS_WR_0_REG_ADDRESS_ERROR (0x1<<0) +#define PXP2_PXP2_INT_STS_WR_0_REG_ADDRESS_ERROR_SIZE 0 +#define PXP2_PXP2_INT_MASK_0_REG_ADDRESS_ERROR (0x1<<0) +#define PXP2_PXP2_INT_MASK_0_REG_ADDRESS_ERROR_SIZE 0 +#define PXP_PXP_INT_STS_0_REG_ADDRESS_ERROR (0x1<<0) +#define PXP_PXP_INT_STS_0_REG_ADDRESS_ERROR_SIZE 0 +#define PXP_PXP_INT_STS_CLR_0_REG_ADDRESS_ERROR (0x1<<0) +#define PXP_PXP_INT_STS_CLR_0_REG_ADDRESS_ERROR_SIZE 0 +#define PXP_PXP_INT_STS_WR_0_REG_ADDRESS_ERROR (0x1<<0) +#define PXP_PXP_INT_STS_WR_0_REG_ADDRESS_ERROR_SIZE 0 +#define PXP_PXP_INT_MASK_0_REG_ADDRESS_ERROR (0x1<<0) +#define PXP_PXP_INT_MASK_0_REG_ADDRESS_ERROR_SIZE 0 +#define QM_QM_INT_STS_REG_ADDRESS_ERROR (0x1<<0) +#define QM_QM_INT_STS_REG_ADDRESS_ERROR_SIZE 0 +#define QM_QM_INT_STS_CLR_REG_ADDRESS_ERROR (0x1<<0) +#define QM_QM_INT_STS_CLR_REG_ADDRESS_ERROR_SIZE 0 +#define QM_QM_INT_STS_WR_REG_ADDRESS_ERROR (0x1<<0) +#define QM_QM_INT_STS_WR_REG_ADDRESS_ERROR_SIZE 0 +#define QM_QM_INT_MASK_REG_ADDRESS_ERROR (0x1<<0) +#define QM_QM_INT_MASK_REG_ADDRESS_ERROR_SIZE 0 +#define SEM_FAST_SEM_FAST_INT_STS_REG_ADDRESS_ERROR (0x1<<0) +#define SEM_FAST_SEM_FAST_INT_STS_REG_ADDRESS_ERROR_SIZE 0 +#define SEM_FAST_SEM_FAST_INT_STS_CLR_REG_ADDRESS_ERROR (0x1<<0) +#define SEM_FAST_SEM_FAST_INT_STS_CLR_REG_ADDRESS_ERROR_SIZE 0 +#define SEM_FAST_SEM_FAST_INT_STS_WR_REG_ADDRESS_ERROR (0x1<<0) +#define SEM_FAST_SEM_FAST_INT_STS_WR_REG_ADDRESS_ERROR_SIZE 0 +#define SEM_FAST_SEM_FAST_INT_MASK_REG_ADDRESS_ERROR (0x1<<0) +#define SEM_FAST_SEM_FAST_INT_MASK_REG_ADDRESS_ERROR_SIZE 0 +#define SRC_SRC_INT_STS_REG_ADDRESS_ERROR (0x1<<0) +#define SRC_SRC_INT_STS_REG_ADDRESS_ERROR_SIZE 0 +#define SRC_SRC_INT_STS_CLR_REG_ADDRESS_ERROR (0x1<<0) +#define SRC_SRC_INT_STS_CLR_REG_ADDRESS_ERROR_SIZE 0 +#define SRC_SRC_INT_STS_WR_REG_ADDRESS_ERROR (0x1<<0) +#define SRC_SRC_INT_STS_WR_REG_ADDRESS_ERROR_SIZE 0 +#define SRC_SRC_INT_MASK_REG_ADDRESS_ERROR (0x1<<0) +#define SRC_SRC_INT_MASK_REG_ADDRESS_ERROR_SIZE 0 #define TCM_TCM_INT_STS_REG_ADDRESS_ERROR (0x1<<0) #define TCM_TCM_INT_STS_REG_ADDRESS_ERROR_SIZE 0 #define TCM_TCM_INT_STS_CLR_REG_ADDRESS_ERROR (0x1<<0) @@ -2471,6 +3226,78 @@ #define TCM_TCM_INT_STS_WR_REG_ADDRESS_ERROR_SIZE 0 #define TCM_TCM_INT_MASK_REG_ADDRESS_ERROR (0x1<<0) #define TCM_TCM_INT_MASK_REG_ADDRESS_ERROR_SIZE 0 +#define TM_TM_INT_STS_REG_ADDRESS_ERROR (0x1<<0) +#define TM_TM_INT_STS_REG_ADDRESS_ERROR_SIZE 0 +#define TM_TM_INT_STS_CLR_REG_ADDRESS_ERROR (0x1<<0) +#define TM_TM_INT_STS_CLR_REG_ADDRESS_ERROR_SIZE 0 +#define TM_TM_INT_STS_WR_REG_ADDRESS_ERROR (0x1<<0) +#define TM_TM_INT_STS_WR_REG_ADDRESS_ERROR_SIZE 0 +#define TM_TM_INT_MASK_REG_ADDRESS_ERROR (0x1<<0) +#define TM_TM_INT_MASK_REG_ADDRESS_ERROR_SIZE 0 +#define TSDM_TSDM_INT_STS_0_REG_ADDRESS_ERROR (0x1<<0) +#define TSDM_TSDM_INT_STS_0_REG_ADDRESS_ERROR_SIZE 0 +#define TSDM_TSDM_INT_STS_CLR_0_REG_ADDRESS_ERROR (0x1<<0) +#define TSDM_TSDM_INT_STS_CLR_0_REG_ADDRESS_ERROR_SIZE 0 +#define TSDM_TSDM_INT_STS_WR_0_REG_ADDRESS_ERROR (0x1<<0) +#define TSDM_TSDM_INT_STS_WR_0_REG_ADDRESS_ERROR_SIZE 0 +#define TSDM_TSDM_INT_MASK_0_REG_ADDRESS_ERROR (0x1<<0) +#define TSDM_TSDM_INT_MASK_0_REG_ADDRESS_ERROR_SIZE 0 +#define TSEM_TSEM_INT_STS_0_REG_ADDRESS_ERROR (0x1<<0) +#define TSEM_TSEM_INT_STS_0_REG_ADDRESS_ERROR_SIZE 0 +#define TSEM_TSEM_INT_STS_CLR_0_REG_ADDRESS_ERROR (0x1<<0) +#define TSEM_TSEM_INT_STS_CLR_0_REG_ADDRESS_ERROR_SIZE 0 +#define TSEM_TSEM_INT_STS_WR_0_REG_ADDRESS_ERROR (0x1<<0) +#define TSEM_TSEM_INT_STS_WR_0_REG_ADDRESS_ERROR_SIZE 0 +#define TSEM_TSEM_INT_MASK_0_REG_ADDRESS_ERROR (0x1<<0) +#define TSEM_TSEM_INT_MASK_0_REG_ADDRESS_ERROR_SIZE 0 +#define UCM_UCM_INT_STS_REG_ADDRESS_ERROR (0x1<<0) +#define UCM_UCM_INT_STS_REG_ADDRESS_ERROR_SIZE 0 +#define UCM_UCM_INT_STS_CLR_REG_ADDRESS_ERROR (0x1<<0) +#define UCM_UCM_INT_STS_CLR_REG_ADDRESS_ERROR_SIZE 0 +#define UCM_UCM_INT_STS_WR_REG_ADDRESS_ERROR (0x1<<0) +#define UCM_UCM_INT_STS_WR_REG_ADDRESS_ERROR_SIZE 0 +#define UCM_UCM_INT_MASK_REG_ADDRESS_ERROR (0x1<<0) +#define UCM_UCM_INT_MASK_REG_ADDRESS_ERROR_SIZE 0 +#define USDM_USDM_INT_STS_0_REG_ADDRESS_ERROR (0x1<<0) +#define USDM_USDM_INT_STS_0_REG_ADDRESS_ERROR_SIZE 0 +#define USDM_USDM_INT_STS_CLR_0_REG_ADDRESS_ERROR (0x1<<0) +#define USDM_USDM_INT_STS_CLR_0_REG_ADDRESS_ERROR_SIZE 0 +#define USDM_USDM_INT_STS_WR_0_REG_ADDRESS_ERROR (0x1<<0) +#define USDM_USDM_INT_STS_WR_0_REG_ADDRESS_ERROR_SIZE 0 +#define USDM_USDM_INT_MASK_0_REG_ADDRESS_ERROR (0x1<<0) +#define USDM_USDM_INT_MASK_0_REG_ADDRESS_ERROR_SIZE 0 +#define USEM_USEM_INT_STS_0_REG_ADDRESS_ERROR (0x1<<0) +#define USEM_USEM_INT_STS_0_REG_ADDRESS_ERROR_SIZE 0 +#define USEM_USEM_INT_STS_CLR_0_REG_ADDRESS_ERROR (0x1<<0) +#define USEM_USEM_INT_STS_CLR_0_REG_ADDRESS_ERROR_SIZE 0 +#define USEM_USEM_INT_STS_WR_0_REG_ADDRESS_ERROR (0x1<<0) +#define USEM_USEM_INT_STS_WR_0_REG_ADDRESS_ERROR_SIZE 0 +#define USEM_USEM_INT_MASK_0_REG_ADDRESS_ERROR (0x1<<0) +#define USEM_USEM_INT_MASK_0_REG_ADDRESS_ERROR_SIZE 0 +#define XCM_XCM_INT_STS_REG_ADDRESS_ERROR (0x1<<0) +#define XCM_XCM_INT_STS_REG_ADDRESS_ERROR_SIZE 0 +#define XCM_XCM_INT_STS_CLR_REG_ADDRESS_ERROR (0x1<<0) +#define XCM_XCM_INT_STS_CLR_REG_ADDRESS_ERROR_SIZE 0 +#define XCM_XCM_INT_STS_WR_REG_ADDRESS_ERROR (0x1<<0) +#define XCM_XCM_INT_STS_WR_REG_ADDRESS_ERROR_SIZE 0 +#define XCM_XCM_INT_MASK_REG_ADDRESS_ERROR (0x1<<0) +#define XCM_XCM_INT_MASK_REG_ADDRESS_ERROR_SIZE 0 +#define XSDM_XSDM_INT_STS_0_REG_ADDRESS_ERROR (0x1<<0) +#define XSDM_XSDM_INT_STS_0_REG_ADDRESS_ERROR_SIZE 0 +#define XSDM_XSDM_INT_STS_CLR_0_REG_ADDRESS_ERROR (0x1<<0) +#define XSDM_XSDM_INT_STS_CLR_0_REG_ADDRESS_ERROR_SIZE 0 +#define XSDM_XSDM_INT_STS_WR_0_REG_ADDRESS_ERROR (0x1<<0) +#define XSDM_XSDM_INT_STS_WR_0_REG_ADDRESS_ERROR_SIZE 0 +#define XSDM_XSDM_INT_MASK_0_REG_ADDRESS_ERROR (0x1<<0) +#define XSDM_XSDM_INT_MASK_0_REG_ADDRESS_ERROR_SIZE 0 +#define XSEM_XSEM_INT_STS_0_REG_ADDRESS_ERROR (0x1<<0) +#define XSEM_XSEM_INT_STS_0_REG_ADDRESS_ERROR_SIZE 0 +#define XSEM_XSEM_INT_STS_CLR_0_REG_ADDRESS_ERROR (0x1<<0) +#define XSEM_XSEM_INT_STS_CLR_0_REG_ADDRESS_ERROR_SIZE 0 +#define XSEM_XSEM_INT_STS_WR_0_REG_ADDRESS_ERROR (0x1<<0) +#define XSEM_XSEM_INT_STS_WR_0_REG_ADDRESS_ERROR_SIZE 0 +#define XSEM_XSEM_INT_MASK_0_REG_ADDRESS_ERROR (0x1<<0) +#define XSEM_XSEM_INT_MASK_0_REG_ADDRESS_ERROR_SIZE 0 #define CFC_DEBUG1_REG_WRITE_AC (0x1<<4) #define CFC_DEBUG1_REG_WRITE_AC_SIZE 4 /* [R 1] debug only: This bit indicates wheter indicates that external @@ -2483,6 +3310,14 @@ ~dbg_registers_debug_target=0 (internal buffer) */ #define DBG_REG_WRAP_ON_INT_BUFFER 0xc128 #define DBG_REG_WRAP_ON_INT_BUFFER_SIZE 1 +#define QM_QM_PRTY_STS_REG_WRBUFF (0x1<<8) +#define QM_QM_PRTY_STS_REG_WRBUFF_SIZE 8 +#define QM_QM_PRTY_STS_CLR_REG_WRBUFF (0x1<<8) +#define QM_QM_PRTY_STS_CLR_REG_WRBUFF_SIZE 8 +#define QM_QM_PRTY_STS_WR_REG_WRBUFF (0x1<<8) +#define QM_QM_PRTY_STS_WR_REG_WRBUFF_SIZE 8 +#define QM_QM_PRTY_MASK_REG_WRBUFF (0x1<<8) +#define QM_QM_PRTY_MASK_REG_WRBUFF_SIZE 8 /* [RW 32] Wrr weights */ #define QM_REG_WRRWEIGHTS_0 0x16880c #define QM_REG_WRRWEIGHTS_0_SIZE 1 @@ -2531,20 +3366,67 @@ /* [RW 32] Wrr weights */ #define QM_REG_WRRWEIGHTS_9 0x168848 #define QM_REG_WRRWEIGHTS_9_SIZE 1 -/* [RW 22] Number of free element in the free list of T2 entries - port 0. */ +/* [RW 32] Wrr weights */ +#define QM_REG_WRRWEIGHTS_16 0x16e000 +#define QM_REG_WRRWEIGHTS_16_SIZE 1 +/* [RW 32] Wrr weights */ +#define QM_REG_WRRWEIGHTS_17 0x16e004 +#define QM_REG_WRRWEIGHTS_17_SIZE 1 +/* [RW 32] Wrr weights */ +#define QM_REG_WRRWEIGHTS_18 0x16e008 +#define QM_REG_WRRWEIGHTS_18_SIZE 1 +/* [RW 32] Wrr weights */ +#define QM_REG_WRRWEIGHTS_19 0x16e00c +#define QM_REG_WRRWEIGHTS_19_SIZE 1 +/* [RW 32] Wrr weights */ +#define QM_REG_WRRWEIGHTS_20 0x16e010 +#define QM_REG_WRRWEIGHTS_20_SIZE 1 +/* [RW 32] Wrr weights */ +#define QM_REG_WRRWEIGHTS_21 0x16e014 +#define QM_REG_WRRWEIGHTS_21_SIZE 1 +/* [RW 32] Wrr weights */ +#define QM_REG_WRRWEIGHTS_22 0x16e018 +#define QM_REG_WRRWEIGHTS_22_SIZE 1 +/* [RW 32] Wrr weights */ +#define QM_REG_WRRWEIGHTS_23 0x16e01c +#define QM_REG_WRRWEIGHTS_23_SIZE 1 +/* [RW 32] Wrr weights */ +#define QM_REG_WRRWEIGHTS_24 0x16e020 +#define QM_REG_WRRWEIGHTS_24_SIZE 1 +/* [RW 32] Wrr weights */ +#define QM_REG_WRRWEIGHTS_25 0x16e024 +#define QM_REG_WRRWEIGHTS_25_SIZE 1 +/* [RW 32] Wrr weights */ +#define QM_REG_WRRWEIGHTS_26 0x16e028 +#define QM_REG_WRRWEIGHTS_26_SIZE 1 +/* [RW 32] Wrr weights */ +#define QM_REG_WRRWEIGHTS_27 0x16e02c +#define QM_REG_WRRWEIGHTS_27_SIZE 1 +/* [RW 32] Wrr weights */ +#define QM_REG_WRRWEIGHTS_28 0x16e030 +#define QM_REG_WRRWEIGHTS_28_SIZE 1 +/* [RW 32] Wrr weights */ +#define QM_REG_WRRWEIGHTS_29 0x16e034 +#define QM_REG_WRRWEIGHTS_29_SIZE 1 +/* [RW 32] Wrr weights */ +#define QM_REG_WRRWEIGHTS_30 0x16e038 +#define QM_REG_WRRWEIGHTS_30_SIZE 1 +/* [RW 32] Wrr weights */ +#define QM_REG_WRRWEIGHTS_31 0x16e03c +#define QM_REG_WRRWEIGHTS_31_SIZE 1 #define SRC_REG_COUNTFREE0 0x40500 -/* [WB 64] First free element in the free list of T2 entries - port 0. */ +/* [RW 1] If clr the searcher is compatible to E1 A0 - support only two + ports. If set the searcher support 8 functions. */ +#define SRC_REG_E1HMF_ENABLE 0x404cc #define SRC_REG_FIRSTFREE0 0x40510 #define SRC_REG_KEYRSS0_0 0x40408 +#define SRC_REG_KEYRSS0_7 0x40424 #define SRC_REG_KEYRSS1_9 0x40454 -/* [WB 64] Last free element in the free list of T2 entries - port 0. */ #define SRC_REG_LASTFREE0 0x40530 -/* [RW 5] The number of hash bits used for the search (h); Values can be 8 - to 24. */ #define SRC_REG_NUMBER_HASH_BITS0 0x40400 /* [RW 1] Reset internal state machines. */ #define SRC_REG_SOFT_RST 0x4049c -/* [R 1] Interrupt register #0 read */ +/* [R 3] Interrupt register #0 read */ #define SRC_REG_SRC_INT_STS 0x404ac /* [RW 3] Parity mask register #0 read/write */ #define SRC_REG_SRC_PRTY_MASK 0x404c8 @@ -2637,11 +3519,14 @@ weight 8 (the most prioritised); 1 stands for weight 1(least prioritised); 2 stands for weight 2; tc. */ #define TCM_REG_PBF_WEIGHT 0x500b4 -/* [RW 6] The physical queue number 0 per port index. */ #define TCM_REG_PHYS_QNUM0_0 0x500e0 #define TCM_REG_PHYS_QNUM0_1 0x500e4 -/* [RW 6] The physical queue number 1 per port index. */ #define TCM_REG_PHYS_QNUM1_0 0x500e8 +#define TCM_REG_PHYS_QNUM1_1 0x500ec +#define TCM_REG_PHYS_QNUM2_0 0x500f0 +#define TCM_REG_PHYS_QNUM2_1 0x500f4 +#define TCM_REG_PHYS_QNUM3_0 0x500f8 +#define TCM_REG_PHYS_QNUM3_1 0x500fc /* [RW 1] Input prs Interface enable. If 0 - the valid input is disregarded; acknowledge output is deasserted; all other signals are treated as usual; if 1 - normal activity. */ @@ -2670,6 +3555,8 @@ #define TCM_REG_TCM_INT_MASK 0x501dc /* [R 11] Interrupt register #0 read */ #define TCM_REG_TCM_INT_STS 0x501d0 +/* [R 27] Parity register #0 read */ +#define TCM_REG_TCM_PRTY_STS 0x501e0 /* [RW 3] The size of AG context region 0 in REG-pairs. Designates the MS REG-pair number (e.g. if region 0 is 6 REG-pairs; the value should be 5). Is used to determine the number of the AG context REG-pairs written back; @@ -2729,6 +3616,7 @@ mechanism. The fields are: [5:0] - length of the message; 15:6] - message pointer; 20:16] - next pointer. */ #define TCM_REG_XX_DESCR_TABLE 0x50280 +#define TCM_REG_XX_DESCR_TABLE_SIZE 32 /* [R 6] Use to read the value of XX protection Free counter. */ #define TCM_REG_XX_FREE 0x50178 /* [RW 6] Initial value for the credit counter; responsible for fulfilling @@ -2780,7 +3668,7 @@ /* [RW 4] Load value for expiration credit cnt. CFC max number of outstanding load requests for timers (expiration) context loading. */ #define TM_REG_EXP_CRDCNT_VAL 0x164238 -/* [RW 18] Linear0 Max active cid. */ +/* [RW 18] Linear0 Max active cid (in banks of 32 entries). */ #define TM_REG_LIN0_MAX_ACTIVE_CID 0x164048 /* [WB 64] Linear0 phy address. */ #define TM_REG_LIN0_PHY_ADDR 0x164270 @@ -2804,6 +3692,21 @@ #define TM_REG_TM_INT_STS 0x1640f0 /* [RW 8] The event id for aggregated interrupt 0 */ #define TSDM_REG_AGG_INT_EVENT_0 0x42038 +#define TSDM_REG_AGG_INT_EVENT_2 0x42040 +#define TSDM_REG_AGG_INT_EVENT_20 0x42088 +#define TSDM_REG_AGG_INT_EVENT_21 0x4208c +#define TSDM_REG_AGG_INT_EVENT_22 0x42090 +#define TSDM_REG_AGG_INT_EVENT_23 0x42094 +#define TSDM_REG_AGG_INT_EVENT_24 0x42098 +#define TSDM_REG_AGG_INT_EVENT_25 0x4209c +#define TSDM_REG_AGG_INT_EVENT_26 0x420a0 +#define TSDM_REG_AGG_INT_EVENT_27 0x420a4 +#define TSDM_REG_AGG_INT_EVENT_28 0x420a8 +#define TSDM_REG_AGG_INT_EVENT_29 0x420ac +#define TSDM_REG_AGG_INT_EVENT_3 0x42044 +#define TSDM_REG_AGG_INT_EVENT_30 0x420b0 +#define TSDM_REG_AGG_INT_EVENT_31 0x420b4 +#define TSDM_REG_AGG_INT_EVENT_4 0x42048 /* [RW 13] The start address in the internal RAM for the cfc_rsp lcid */ #define TSDM_REG_CFC_RSP_START_ADDR 0x42008 /* [RW 16] The maximum value of the competion counter #0 */ @@ -2868,6 +3771,9 @@ /* [RW 32] Interrupt mask register #0 read/write */ #define TSDM_REG_TSDM_INT_MASK_0 0x4229c #define TSDM_REG_TSDM_INT_MASK_1 0x422ac +/* [R 32] Interrupt register #0 read */ +#define TSDM_REG_TSDM_INT_STS_0 0x42290 +#define TSDM_REG_TSDM_INT_STS_1 0x422a0 /* [RW 11] Parity mask register #0 read/write */ #define TSDM_REG_TSDM_PRTY_MASK 0x422bc /* [R 11] Parity register #0 read */ @@ -2908,9 +3814,8 @@ #define TSEM_REG_ENABLE_OUT 0x1800a8 /* [RW 32] This address space contains all registers and memories that are placed in SEM_FAST block. The SEM_FAST registers are described in - appendix B. In order to access the SEM_FAST registers the base address - TSEM_REGISTERS_FAST_MEMORY (Offset: 0x1a0000) should be added to each - SEM_FAST register offset. */ + appendix B. In order to access the sem_fast registers the base address + ~fast_memory.fast_memory should be added to eachsem_fast register offset. */ #define TSEM_REG_FAST_MEMORY 0x1a0000 /* [RW 1] Disables input messages from FIC0 May be updated during run_time by the microcode */ @@ -2921,6 +3826,7 @@ /* [RW 15] Interrupt table Read and write access to it is not possible in the middle of the work */ #define TSEM_REG_INT_TABLE 0x180400 +#define TSEM_REG_INT_TABLE_SIZE 256 /* [ST 24] Statistics register. The number of messages that entered through FIC0 */ #define TSEM_REG_MSG_NUM_FIC0 0x180000 @@ -2993,6 +3899,9 @@ /* [RW 32] Interrupt mask register #0 read/write */ #define TSEM_REG_TSEM_INT_MASK_0 0x180100 #define TSEM_REG_TSEM_INT_MASK_1 0x180110 +/* [R 32] Interrupt register #0 read */ +#define TSEM_REG_TSEM_INT_STS_0 0x1800f4 +#define TSEM_REG_TSEM_INT_STS_1 0x180104 /* [RW 32] Parity mask register #0 read/write */ #define TSEM_REG_TSEM_PRTY_MASK_0 0x180120 #define TSEM_REG_TSEM_PRTY_MASK_1 0x180130 @@ -3088,12 +3997,15 @@ #define UCM_REG_N_SM_CTX_LD_2 0xe005c #define UCM_REG_N_SM_CTX_LD_3 0xe0060 #define UCM_REG_N_SM_CTX_LD_4 0xe0064 -/* [RW 6] The physical queue number 0 per port index (CID[23]) */ +#define UCM_REG_N_SM_CTX_LD_5 0xe0068 #define UCM_REG_PHYS_QNUM0_0 0xe0110 #define UCM_REG_PHYS_QNUM0_1 0xe0114 -/* [RW 6] The physical queue number 1 per port index (CID[23]) */ #define UCM_REG_PHYS_QNUM1_0 0xe0118 #define UCM_REG_PHYS_QNUM1_1 0xe011c +#define UCM_REG_PHYS_QNUM2_0 0xe0120 +#define UCM_REG_PHYS_QNUM2_1 0xe0124 +#define UCM_REG_PHYS_QNUM3_0 0xe0128 +#define UCM_REG_PHYS_QNUM3_1 0xe012c /* [RW 8] The Event ID for Timers formatting in case of stop done. */ #define UCM_REG_STOP_EVNT_ID 0xe00ac /* [RC 1] Set when the message length mismatch (relative to last indication) @@ -3132,6 +4044,8 @@ #define UCM_REG_UCM_INT_MASK 0xe01d4 /* [R 11] Interrupt register #0 read */ #define UCM_REG_UCM_INT_STS 0xe01c8 +/* [R 27] Parity register #0 read */ +#define UCM_REG_UCM_PRTY_STS 0xe01d8 /* [RW 2] The size of AG context region 0 in REG-pairs. Designates the MS REG-pair number (e.g. if region 0 is 6 REG-pairs; the value should be 5). Is used to determine the number of the AG context REG-pairs written back; @@ -3189,6 +4103,7 @@ mechanism. The fields are:[5:0] - message length; 14:6] - message pointer; 19:15] - next pointer. */ #define UCM_REG_XX_DESCR_TABLE 0xe0280 +#define UCM_REG_XX_DESCR_TABLE_SIZE 32 /* [R 6] Use to read the XX protection Free counter. */ #define UCM_REG_XX_FREE 0xe016c /* [RW 6] Initial value for the credit counter; responsible for fulfilling @@ -3218,6 +4133,21 @@ #define USDM_REG_AGG_INT_EVENT_17 0xc407c #define USDM_REG_AGG_INT_EVENT_18 0xc4080 #define USDM_REG_AGG_INT_EVENT_19 0xc4084 +#define USDM_REG_AGG_INT_EVENT_2 0xc4040 +#define USDM_REG_AGG_INT_EVENT_20 0xc4088 +#define USDM_REG_AGG_INT_EVENT_21 0xc408c +#define USDM_REG_AGG_INT_EVENT_22 0xc4090 +#define USDM_REG_AGG_INT_EVENT_23 0xc4094 +#define USDM_REG_AGG_INT_EVENT_24 0xc4098 +#define USDM_REG_AGG_INT_EVENT_25 0xc409c +#define USDM_REG_AGG_INT_EVENT_26 0xc40a0 +#define USDM_REG_AGG_INT_EVENT_27 0xc40a4 +#define USDM_REG_AGG_INT_EVENT_28 0xc40a8 +#define USDM_REG_AGG_INT_EVENT_29 0xc40ac +#define USDM_REG_AGG_INT_EVENT_3 0xc4044 +#define USDM_REG_AGG_INT_EVENT_30 0xc40b0 +#define USDM_REG_AGG_INT_EVENT_31 0xc40b4 +#define USDM_REG_AGG_INT_EVENT_4 0xc4048 /* [RW 1] For each aggregated interrupt index whether the mode is normal (0) or auto-mask-mode (1) */ #define USDM_REG_AGG_INT_MODE_0 0xc41b8 @@ -3298,6 +4228,9 @@ /* [RW 32] Interrupt mask register #0 read/write */ #define USDM_REG_USDM_INT_MASK_0 0xc42a0 #define USDM_REG_USDM_INT_MASK_1 0xc42b0 +/* [R 32] Interrupt register #0 read */ +#define USDM_REG_USDM_INT_STS_0 0xc4294 +#define USDM_REG_USDM_INT_STS_1 0xc42a4 /* [RW 11] Parity mask register #0 read/write */ #define USDM_REG_USDM_PRTY_MASK 0xc42c0 /* [R 11] Parity register #0 read */ @@ -3338,9 +4271,8 @@ #define USEM_REG_ENABLE_OUT 0x3000a8 /* [RW 32] This address space contains all registers and memories that are placed in SEM_FAST block. The SEM_FAST registers are described in - appendix B. In order to access the SEM_FAST registers... the base address - USEM_REGISTERS_FAST_MEMORY (Offset: 0x320000) should be added to each - SEM_FAST register offset. */ + appendix B. In order to access the sem_fast registers the base address + ~fast_memory.fast_memory should be added to eachsem_fast register offset. */ #define USEM_REG_FAST_MEMORY 0x320000 /* [RW 1] Disables input messages from FIC0 May be updated during run_time by the microcode */ @@ -3351,6 +4283,7 @@ /* [RW 15] Interrupt table Read and write access to it is not possible in the middle of the work */ #define USEM_REG_INT_TABLE 0x300400 +#define USEM_REG_INT_TABLE_SIZE 256 /* [ST 24] Statistics register. The number of messages that entered through FIC0 */ #define USEM_REG_MSG_NUM_FIC0 0x300000 @@ -3423,6 +4356,9 @@ /* [RW 32] Interrupt mask register #0 read/write */ #define USEM_REG_USEM_INT_MASK_0 0x300110 #define USEM_REG_USEM_INT_MASK_1 0x300120 +/* [R 32] Interrupt register #0 read */ +#define USEM_REG_USEM_INT_STS_0 0x300104 +#define USEM_REG_USEM_INT_STS_1 0x300114 /* [RW 32] Parity mask register #0 read/write */ #define USEM_REG_USEM_PRTY_MASK_0 0x300130 #define USEM_REG_USEM_PRTY_MASK_1 0x300140 @@ -3491,11 +4427,8 @@ writes the initial credit value; read returns the current value of the credit counter. Must be initialized to 64 at start-up. */ #define XCM_REG_FIC1_INIT_CRD 0x20410 -/* [RW 8] The maximum delayed ACK counter value.Must be at least 2. Per port - value. */ #define XCM_REG_GLB_DEL_ACK_MAX_CNT_0 0x20118 #define XCM_REG_GLB_DEL_ACK_MAX_CNT_1 0x2011c -/* [RW 28] The delayed ACK timeout in ticks. Per port value. */ #define XCM_REG_GLB_DEL_ACK_TMR_VAL_0 0x20108 #define XCM_REG_GLB_DEL_ACK_TMR_VAL_1 0x2010c /* [RW 1] Arbitratiojn between Input Arbiter groups: 0 - fair Round-Robin; 1 @@ -3545,6 +4478,7 @@ #define XCM_REG_N_SM_CTX_LD_2 0x20068 #define XCM_REG_N_SM_CTX_LD_3 0x2006c #define XCM_REG_N_SM_CTX_LD_4 0x20070 +#define XCM_REG_N_SM_CTX_LD_5 0x20074 /* [RW 1] Input pbf Interface enable. If 0 - the valid input is disregarded; acknowledge output is deasserted; all other signals are treated as usual; if 1 - normal activity. */ @@ -3556,6 +4490,8 @@ weight 8 (the most prioritised); 1 stands for weight 1(least prioritised); 2 stands for weight 2; tc. */ #define XCM_REG_PBF_WEIGHT 0x200d0 +#define XCM_REG_PHYS_QNUM3_0 0x20100 +#define XCM_REG_PHYS_QNUM3_1 0x20104 /* [RW 8] The Event ID for Timers formatting in case of stop done. */ #define XCM_REG_STOP_EVNT_ID 0x200b8 /* [RC 1] Set at message length mismatch (relative to last indication) at @@ -3603,53 +4539,17 @@ weight 8 (the most prioritised); 1 stands for weight 1(least prioritised); 2 stands for weight 2; tc. */ #define XCM_REG_USEM_WEIGHT 0x200c8 -/* [RW 2] DA counter command; used in case of window update doorbell.The - first index stands for the value DaEnable of that connection. The second - index stands for port number. */ #define XCM_REG_WU_DA_CNT_CMD00 0x201d4 -/* [RW 2] DA counter command; used in case of window update doorbell.The - first index stands for the value DaEnable of that connection. The second - index stands for port number. */ #define XCM_REG_WU_DA_CNT_CMD01 0x201d8 -/* [RW 2] DA counter command; used in case of window update doorbell.The - first index stands for the value DaEnable of that connection. The second - index stands for port number. */ #define XCM_REG_WU_DA_CNT_CMD10 0x201dc -/* [RW 2] DA counter command; used in case of window update doorbell.The - first index stands for the value DaEnable of that connection. The second - index stands for port number. */ #define XCM_REG_WU_DA_CNT_CMD11 0x201e0 -/* [RW 8] DA counter update value used in case of window update doorbell.The - first index stands for the value DaEnable of that connection. The second - index stands for port number. */ #define XCM_REG_WU_DA_CNT_UPD_VAL00 0x201e4 -/* [RW 8] DA counter update value; used in case of window update - doorbell.The first index stands for the value DaEnable of that - connection. The second index stands for port number. */ #define XCM_REG_WU_DA_CNT_UPD_VAL01 0x201e8 -/* [RW 8] DA counter update value; used in case of window update - doorbell.The first index stands for the value DaEnable of that - connection. The second index stands for port number. */ #define XCM_REG_WU_DA_CNT_UPD_VAL10 0x201ec -/* [RW 8] DA counter update value; used in case of window update - doorbell.The first index stands for the value DaEnable of that - connection. The second index stands for port number. */ #define XCM_REG_WU_DA_CNT_UPD_VAL11 0x201f0 -/* [RW 1] DA timer command; used in case of window update doorbell.The first - index stands for the value DaEnable of that connection. The second index - stands for port number. */ #define XCM_REG_WU_DA_SET_TMR_CNT_FLG_CMD00 0x201c4 -/* [RW 1] DA timer command; used in case of window update doorbell.The first - index stands for the value DaEnable of that connection. The second index - stands for port number. */ #define XCM_REG_WU_DA_SET_TMR_CNT_FLG_CMD01 0x201c8 -/* [RW 1] DA timer command; used in case of window update doorbell.The first - index stands for the value DaEnable of that connection. The second index - stands for port number. */ #define XCM_REG_WU_DA_SET_TMR_CNT_FLG_CMD10 0x201cc -/* [RW 1] DA timer command; used in case of window update doorbell.The first - index stands for the value DaEnable of that connection. The second index - stands for port number. */ #define XCM_REG_WU_DA_SET_TMR_CNT_FLG_CMD11 0x201d0 /* [RW 1] CM - CFC Interface enable. If 0 - the valid input is disregarded; acknowledge output is deasserted; all other signals are treated as usual; @@ -3659,6 +4559,8 @@ #define XCM_REG_XCM_INT_MASK 0x202b4 /* [R 14] Interrupt register #0 read */ #define XCM_REG_XCM_INT_STS 0x202a8 +/* [R 30] Parity register #0 read */ +#define XCM_REG_XCM_PRTY_STS 0x202b8 /* [RW 4] The size of AG context region 0 in REG-pairs. Designates the MS REG-pair number (e.g. if region 0 is 6 REG-pairs; the value should be 5). Is used to determine the number of the AG context REG-pairs written back; @@ -3715,6 +4617,7 @@ mechanism. The fields are: [5:0] - message length; 11:6] - message pointer; 16:12] - next pointer. */ #define XCM_REG_XX_DESCR_TABLE 0x20480 +#define XCM_REG_XX_DESCR_TABLE_SIZE 32 /* [R 6] Used to read the XX protection Free counter. */ #define XCM_REG_XX_FREE 0x20240 /* [RW 6] Initial value for the credit counter; responsible for fulfilling @@ -3728,7 +4631,7 @@ #define XCM_REG_XX_MSG_NUM 0x20428 /* [RW 8] The Event ID; sent to the STORM in case of XX overflow. */ #define XCM_REG_XX_OVFL_EVNT_ID 0x20058 -/* [RW 15] Indirect access to the XX table of the XX protection mechanism. +/* [RW 16] Indirect access to the XX table of the XX protection mechanism. The fields are:[4:0] - tail pointer; 9:5] - Link List size; 14:10] - header pointer. */ #define XCM_REG_XX_TABLE 0x20500 @@ -3745,6 +4648,9 @@ #define XSDM_REG_AGG_INT_EVENT_17 0x16607c #define XSDM_REG_AGG_INT_EVENT_18 0x166080 #define XSDM_REG_AGG_INT_EVENT_19 0x166084 +#define XSDM_REG_AGG_INT_EVENT_10 0x166060 +#define XSDM_REG_AGG_INT_EVENT_11 0x166064 +#define XSDM_REG_AGG_INT_EVENT_12 0x166068 #define XSDM_REG_AGG_INT_EVENT_2 0x166040 #define XSDM_REG_AGG_INT_EVENT_20 0x166088 #define XSDM_REG_AGG_INT_EVENT_21 0x16608c @@ -3756,6 +4662,15 @@ #define XSDM_REG_AGG_INT_EVENT_27 0x1660a4 #define XSDM_REG_AGG_INT_EVENT_28 0x1660a8 #define XSDM_REG_AGG_INT_EVENT_29 0x1660ac +#define XSDM_REG_AGG_INT_EVENT_3 0x166044 +#define XSDM_REG_AGG_INT_EVENT_30 0x1660b0 +#define XSDM_REG_AGG_INT_EVENT_31 0x1660b4 +#define XSDM_REG_AGG_INT_EVENT_4 0x166048 +#define XSDM_REG_AGG_INT_EVENT_5 0x16604c +#define XSDM_REG_AGG_INT_EVENT_6 0x166050 +#define XSDM_REG_AGG_INT_EVENT_7 0x166054 +#define XSDM_REG_AGG_INT_EVENT_8 0x166058 +#define XSDM_REG_AGG_INT_EVENT_9 0x16605c /* [RW 1] For each aggregated interrupt index whether the mode is normal (0) or auto-mask-mode (1) */ #define XSDM_REG_AGG_INT_MODE_0 0x1661b8 @@ -3832,6 +4747,9 @@ /* [RW 32] Interrupt mask register #0 read/write */ #define XSDM_REG_XSDM_INT_MASK_0 0x16629c #define XSDM_REG_XSDM_INT_MASK_1 0x1662ac +/* [R 32] Interrupt register #0 read */ +#define XSDM_REG_XSDM_INT_STS_0 0x166290 +#define XSDM_REG_XSDM_INT_STS_1 0x1662a0 /* [RW 11] Parity mask register #0 read/write */ #define XSDM_REG_XSDM_PRTY_MASK 0x1662bc /* [R 11] Parity register #0 read */ @@ -3872,9 +4790,8 @@ #define XSEM_REG_ENABLE_OUT 0x2800a8 /* [RW 32] This address space contains all registers and memories that are placed in SEM_FAST block. The SEM_FAST registers are described in - appendix B. In order to access the SEM_FAST registers the base address - XSEM_REGISTERS_FAST_MEMORY (Offset: 0x2a0000) should be added to each - SEM_FAST register offset. */ + appendix B. In order to access the sem_fast registers the base address + ~fast_memory.fast_memory should be added to eachsem_fast register offset. */ #define XSEM_REG_FAST_MEMORY 0x2a0000 /* [RW 1] Disables input messages from FIC0 May be updated during run_time by the microcode */ @@ -3885,6 +4802,7 @@ /* [RW 15] Interrupt table Read and write access to it is not possible in the middle of the work */ #define XSEM_REG_INT_TABLE 0x280400 +#define XSEM_REG_INT_TABLE_SIZE 256 /* [ST 24] Statistics register. The number of messages that entered through FIC0 */ #define XSEM_REG_MSG_NUM_FIC0 0x280000 @@ -3957,6 +4875,9 @@ /* [RW 32] Interrupt mask register #0 read/write */ #define XSEM_REG_XSEM_INT_MASK_0 0x280110 #define XSEM_REG_XSEM_INT_MASK_1 0x280120 +/* [R 32] Interrupt register #0 read */ +#define XSEM_REG_XSEM_INT_STS_0 0x280104 +#define XSEM_REG_XSEM_INT_STS_1 0x280114 /* [RW 32] Parity mask register #0 read/write */ #define XSEM_REG_XSEM_PRTY_MASK_0 0x280130 #define XSEM_REG_XSEM_PRTY_MASK_1 0x280140 @@ -3993,10 +4914,14 @@ #define BIGMAC_REGISTER_TX_SOURCE_ADDR (0x08<<3) #define BIGMAC_REGISTER_TX_STAT_GTBYT (0x20<<3) #define BIGMAC_REGISTER_TX_STAT_GTPKT (0x0C<<3) +#define EMAC_LED_1000MB_OVERRIDE (1L<<1) +#define EMAC_LED_100MB_OVERRIDE (1L<<2) +#define EMAC_LED_10MB_OVERRIDE (1L<<3) +#define EMAC_LED_2500MB_OVERRIDE (1L<<12) +#define EMAC_LED_OVERRIDE (1L<<0) +#define EMAC_LED_TRAFFIC (1L<<6) #define EMAC_MDIO_COMM_COMMAND_ADDRESS (0L<<26) -#define EMAC_MDIO_COMM_COMMAND_READ_22 (2L<<26) #define EMAC_MDIO_COMM_COMMAND_READ_45 (3L<<26) -#define EMAC_MDIO_COMM_COMMAND_WRITE_22 (1L<<26) #define EMAC_MDIO_COMM_COMMAND_WRITE_45 (1L<<26) #define EMAC_MDIO_COMM_DATA (0xffffL<<0) #define EMAC_MDIO_COMM_START_BUSY (1L<<29) @@ -4013,6 +4938,7 @@ #define EMAC_MODE_PORT_MII (1L<<2) #define EMAC_MODE_PORT_MII_10M (3L<<2) #define EMAC_MODE_RESET (1L<<0) +#define EMAC_REG_EMAC_LED 0xc #define EMAC_REG_EMAC_MAC_MATCH 0x10 #define EMAC_REG_EMAC_MDIO_COMM 0xac #define EMAC_REG_EMAC_MDIO_MODE 0xb4 @@ -4030,14 +4956,16 @@ #define EMAC_RX_MODE_PROMISCUOUS (1L<<8) #define EMAC_RX_MTU_SIZE_JUMBO_ENA (1L<<31) #define EMAC_TX_MODE_EXT_PAUSE_EN (1L<<3) -#define EMAC_TX_MODE_RESET (1L<<0) +#define MISC_REGISTERS_GPIO_0 0 #define MISC_REGISTERS_GPIO_1 1 #define MISC_REGISTERS_GPIO_2 2 #define MISC_REGISTERS_GPIO_3 3 #define MISC_REGISTERS_GPIO_CLR_POS 16 #define MISC_REGISTERS_GPIO_FLOAT (0xffL<<24) #define MISC_REGISTERS_GPIO_FLOAT_POS 24 +#define MISC_REGISTERS_GPIO_HIGH 1 #define MISC_REGISTERS_GPIO_INPUT_HI_Z 2 +#define MISC_REGISTERS_GPIO_LOW 0 #define MISC_REGISTERS_GPIO_OUTPUT_HIGH 1 #define MISC_REGISTERS_GPIO_OUTPUT_LOW 0 #define MISC_REGISTERS_GPIO_PORT_SHIFT 4 @@ -4127,7 +5055,7 @@ #define AEU_INPUTS_ATTN_BITS_XSEMI_PARITY_ERROR (1<<10) #define RESERVED_GENERAL_ATTENTION_BIT_0 0 -#define EVEREST_GEN_ATTN_IN_USE_MASK 0x3e0 +#define EVEREST_GEN_ATTN_IN_USE_MASK 0x3ffe0 #define EVEREST_LATCHED_ATTN_IN_USE_MASK 0xffe00000 #define RESERVED_GENERAL_ATTENTION_BIT_6 6 @@ -4156,6 +5084,17 @@ /* mcp error attention bit */ #define MCP_FATAL_ASSERT_ATTENTION_BIT RESERVED_GENERAL_ATTENTION_BIT_11 +/*E1H NIG status sync attention mapped to group 4-7*/ +#define LINK_SYNC_ATTENTION_BIT_FUNC_0 RESERVED_GENERAL_ATTENTION_BIT_12 +#define LINK_SYNC_ATTENTION_BIT_FUNC_1 RESERVED_GENERAL_ATTENTION_BIT_13 +#define LINK_SYNC_ATTENTION_BIT_FUNC_2 RESERVED_GENERAL_ATTENTION_BIT_14 +#define LINK_SYNC_ATTENTION_BIT_FUNC_3 RESERVED_GENERAL_ATTENTION_BIT_15 +#define LINK_SYNC_ATTENTION_BIT_FUNC_4 RESERVED_GENERAL_ATTENTION_BIT_16 +#define LINK_SYNC_ATTENTION_BIT_FUNC_5 RESERVED_GENERAL_ATTENTION_BIT_17 +#define LINK_SYNC_ATTENTION_BIT_FUNC_6 RESERVED_GENERAL_ATTENTION_BIT_18 +#define LINK_SYNC_ATTENTION_BIT_FUNC_7 RESERVED_GENERAL_ATTENTION_BIT_19 + + #define LATCHED_ATTN_RBCR 23 #define LATCHED_ATTN_RBCT 24 #define LATCHED_ATTN_RBCN 25 @@ -4221,22 +5160,41 @@ #define PCICFG_OFFSET 0x2000 #define PCICFG_VENDOR_ID_OFFSET 0x00 #define PCICFG_DEVICE_ID_OFFSET 0x02 -#define PCICFG_SUBSYSTEM_VENDOR_ID_OFFSET 0x2c -#define PCICFG_SUBSYSTEM_ID_OFFSET 0x2e -#define PCICFG_INT_LINE 0x3c -#define PCICFG_INT_PIN 0x3d +#define PCICFG_COMMAND_OFFSET 0x04 +#define PCICFG_STATUS_OFFSET 0x06 +#define PCICFG_REVESION_ID 0x08 #define PCICFG_CACHE_LINE_SIZE 0x0c #define PCICFG_LATENCY_TIMER 0x0d -#define PCICFG_REVESION_ID 0x08 -#define PCICFG_BAR_1_LOW 0x10 -#define PCICFG_BAR_1_HIGH 0x14 -#define PCICFG_BAR_2_LOW 0x18 -#define PCICFG_BAR_2_HIGH 0x1c -#define PCICFG_GRC_ADDRESS 0x78 -#define PCICFG_GRC_DATA 0x80 +#define PCICFG_BAR_1_LOW 0x10 +#define PCICFG_BAR_1_HIGH 0x14 +#define PCICFG_BAR_2_LOW 0x18 +#define PCICFG_BAR_2_HIGH 0x1c +#define PCICFG_SUBSYSTEM_VENDOR_ID_OFFSET 0x2c +#define PCICFG_SUBSYSTEM_ID_OFFSET 0x2e +#define PCICFG_INT_LINE 0x3c +#define PCICFG_INT_PIN 0x3d +#define PCICFG_PM_CSR_OFFSET 0x4c +#define PCICFG_GRC_ADDRESS 0x78 +#define PCICFG_GRC_DATA 0x80 #define PCICFG_DEVICE_CONTROL 0xb4 #define PCICFG_LINK_CONTROL 0xbc +#define PCICFG_COMMAND_IO_SPACE (1<<0) +#define PCICFG_COMMAND_MEM_SPACE (1<<1) +#define PCICFG_COMMAND_BUS_MASTER (1<<2) +#define PCICFG_COMMAND_SPECIAL_CYCLES (1<<3) +#define PCICFG_COMMAND_MWI_CYCLES (1<<4) +#define PCICFG_COMMAND_VGA_SNOOP (1<<5) +#define PCICFG_COMMAND_PERR_ENA (1<<6) +#define PCICFG_COMMAND_STEPPING (1<<7) +#define PCICFG_COMMAND_SERR_ENA (1<<8) +#define PCICFG_COMMAND_FAST_B2B (1<<9) +#define PCICFG_COMMAND_INT_DISABLE (1<<10) +#define PCICFG_COMMAND_RESERVED (0x1f<<11) + +#define PCICFG_PM_CSR_STATE (0x3<<0) +#define PCICFG_PM_CSR_PME_STATUS (1<<15) + #define BAR_USTRORM_INTMEM 0x400000 #define BAR_CSTRORM_INTMEM 0x410000 #define BAR_XSTRORM_INTMEM 0x420000 @@ -4336,7 +5294,7 @@ #define MDIO_CL73_IEEEB0_CL73_AN_CONTROL_MAIN_RST 0x8000 #define MDIO_REG_BANK_CL73_IEEEB1 0x10 -#define MDIO_CL73_IEEEB1_AN_ADV2 0x01 +#define MDIO_CL73_IEEEB1_AN_ADV2 0x01 #define MDIO_CL73_IEEEB1_AN_ADV2_ADVR_1000M 0x0000 #define MDIO_CL73_IEEEB1_AN_ADV2_ADVR_1000M_KX 0x0020 #define MDIO_CL73_IEEEB1_AN_ADV2_ADVR_10G_KX4 0x0040 @@ -4365,7 +5323,7 @@ #define MDIO_REG_BANK_RX_ALL 0x80f0 #define MDIO_RX_ALL_RX_EQ_BOOST 0x1c #define MDIO_RX_ALL_RX_EQ_BOOST_EQUALIZER_CTRL_MASK 0x7 -#define MDIO_RX_ALL_RX_EQ_BOOST_OFFSET_CTRL 0x10 +#define MDIO_RX_ALL_RX_EQ_BOOST_OFFSET_CTRL 0x10 #define MDIO_REG_BANK_TX0 0x8060 #define MDIO_TX0_TX_DRIVER 0x17 @@ -4392,213 +5350,266 @@ #define MDIO_XGXS_BLOCK2_RX_LN_SWAP 0x10 #define MDIO_XGXS_BLOCK2_RX_LN_SWAP_ENABLE 0x8000 #define MDIO_XGXS_BLOCK2_RX_LN_SWAP_FORCE_ENABLE 0x4000 -#define MDIO_XGXS_BLOCK2_TX_LN_SWAP 0x11 +#define MDIO_XGXS_BLOCK2_TX_LN_SWAP 0x11 #define MDIO_XGXS_BLOCK2_TX_LN_SWAP_ENABLE 0x8000 -#define MDIO_XGXS_BLOCK2_UNICORE_MODE_10G 0x14 +#define MDIO_XGXS_BLOCK2_UNICORE_MODE_10G 0x14 #define MDIO_XGXS_BLOCK2_UNICORE_MODE_10G_CX4_XGXS 0x0001 #define MDIO_XGXS_BLOCK2_UNICORE_MODE_10G_HIGIG_XGXS 0x0010 -#define MDIO_XGXS_BLOCK2_TEST_MODE_LANE 0x15 +#define MDIO_XGXS_BLOCK2_TEST_MODE_LANE 0x15 #define MDIO_REG_BANK_GP_STATUS 0x8120 -#define MDIO_GP_STATUS_TOP_AN_STATUS1 0x1B -#define MDIO_GP_STATUS_TOP_AN_STATUS1_CL73_AUTONEG_COMPLETE 0x0001 -#define MDIO_GP_STATUS_TOP_AN_STATUS1_CL37_AUTONEG_COMPLETE 0x0002 -#define MDIO_GP_STATUS_TOP_AN_STATUS1_LINK_STATUS 0x0004 -#define MDIO_GP_STATUS_TOP_AN_STATUS1_DUPLEX_STATUS 0x0008 -#define MDIO_GP_STATUS_TOP_AN_STATUS1_CL73_MR_LP_NP_AN_ABLE 0x0010 -#define MDIO_GP_STATUS_TOP_AN_STATUS1_CL73_LP_NP_BAM_ABLE 0x0020 - -#define MDIO_GP_STATUS_TOP_AN_STATUS1_PAUSE_RSOLUTION_TXSIDE 0x0040 -#define MDIO_GP_STATUS_TOP_AN_STATUS1_PAUSE_RSOLUTION_RXSIDE 0x0080 -#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_MASK 0x3f00 -#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_10M 0x0000 -#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_100M 0x0100 -#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_1G 0x0200 -#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_2_5G 0x0300 -#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_5G 0x0400 -#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_6G 0x0500 -#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_10G_HIG 0x0600 -#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_10G_CX4 0x0700 -#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_12G_HIG 0x0800 -#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_12_5G 0x0900 -#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_13G 0x0A00 -#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_15G 0x0B00 -#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_16G 0x0C00 -#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_1G_KX 0x0D00 -#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_10G_KX4 0x0E00 +#define MDIO_GP_STATUS_TOP_AN_STATUS1 0x1B +#define MDIO_GP_STATUS_TOP_AN_STATUS1_CL73_AUTONEG_COMPLETE 0x0001 +#define MDIO_GP_STATUS_TOP_AN_STATUS1_CL37_AUTONEG_COMPLETE 0x0002 +#define MDIO_GP_STATUS_TOP_AN_STATUS1_LINK_STATUS 0x0004 +#define MDIO_GP_STATUS_TOP_AN_STATUS1_DUPLEX_STATUS 0x0008 +#define MDIO_GP_STATUS_TOP_AN_STATUS1_CL73_MR_LP_NP_AN_ABLE 0x0010 +#define MDIO_GP_STATUS_TOP_AN_STATUS1_CL73_LP_NP_BAM_ABLE 0x0020 +#define MDIO_GP_STATUS_TOP_AN_STATUS1_PAUSE_RSOLUTION_TXSIDE 0x0040 +#define MDIO_GP_STATUS_TOP_AN_STATUS1_PAUSE_RSOLUTION_RXSIDE 0x0080 +#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_MASK 0x3f00 +#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_10M 0x0000 +#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_100M 0x0100 +#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_1G 0x0200 +#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_2_5G 0x0300 +#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_5G 0x0400 +#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_6G 0x0500 +#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_10G_HIG 0x0600 +#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_10G_CX4 0x0700 +#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_12G_HIG 0x0800 +#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_12_5G 0x0900 +#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_13G 0x0A00 +#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_15G 0x0B00 +#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_16G 0x0C00 +#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_1G_KX 0x0D00 +#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_10G_KX4 0x0E00 #define MDIO_REG_BANK_10G_PARALLEL_DETECT 0x8130 -#define MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_CONTROL 0x11 -#define MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_CONTROL_PARDET10G_EN 0x1 -#define MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_LINK 0x13 -#define MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_LINK_CNT (0xb71<<1) +#define MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_CONTROL 0x11 +#define MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_CONTROL_PARDET10G_EN 0x1 +#define MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_LINK 0x13 +#define MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_LINK_CNT (0xb71<<1) #define MDIO_REG_BANK_SERDES_DIGITAL 0x8300 -#define MDIO_SERDES_DIGITAL_A_1000X_CONTROL1 0x10 -#define MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_FIBER_MODE 0x0001 -#define MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_TBI_IF 0x0002 -#define MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_SIGNAL_DETECT_EN 0x0004 -#define MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_INVERT_SIGNAL_DETECT 0x0008 -#define MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_AUTODET 0x0010 -#define MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_MSTR_MODE 0x0020 -#define MDIO_SERDES_DIGITAL_A_1000X_CONTROL2 0x11 -#define MDIO_SERDES_DIGITAL_A_1000X_CONTROL2_PRL_DT_EN 0x0001 -#define MDIO_SERDES_DIGITAL_A_1000X_CONTROL2_AN_FST_TMR 0x0040 -#define MDIO_SERDES_DIGITAL_A_1000X_STATUS1 0x14 -#define MDIO_SERDES_DIGITAL_A_1000X_STATUS1_DUPLEX 0x0004 -#define MDIO_SERDES_DIGITAL_A_1000X_STATUS1_SPEED_MASK 0x0018 -#define MDIO_SERDES_DIGITAL_A_1000X_STATUS1_SPEED_SHIFT 3 -#define MDIO_SERDES_DIGITAL_A_1000X_STATUS1_SPEED_2_5G 0x0018 -#define MDIO_SERDES_DIGITAL_A_1000X_STATUS1_SPEED_1G 0x0010 -#define MDIO_SERDES_DIGITAL_A_1000X_STATUS1_SPEED_100M 0x0008 -#define MDIO_SERDES_DIGITAL_A_1000X_STATUS1_SPEED_10M 0x0000 -#define MDIO_SERDES_DIGITAL_MISC1 0x18 -#define MDIO_SERDES_DIGITAL_MISC1_REFCLK_SEL_MASK 0xE000 -#define MDIO_SERDES_DIGITAL_MISC1_REFCLK_SEL_25M 0x0000 -#define MDIO_SERDES_DIGITAL_MISC1_REFCLK_SEL_100M 0x2000 -#define MDIO_SERDES_DIGITAL_MISC1_REFCLK_SEL_125M 0x4000 -#define MDIO_SERDES_DIGITAL_MISC1_REFCLK_SEL_156_25M 0x6000 -#define MDIO_SERDES_DIGITAL_MISC1_REFCLK_SEL_187_5M 0x8000 -#define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_SEL 0x0010 -#define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_MASK 0x000f -#define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_2_5G 0x0000 -#define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_5G 0x0001 -#define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_6G 0x0002 -#define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_10G_HIG 0x0003 -#define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_10G_CX4 0x0004 -#define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_12G 0x0005 -#define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_12_5G 0x0006 -#define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_13G 0x0007 -#define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_15G 0x0008 -#define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_16G 0x0009 +#define MDIO_SERDES_DIGITAL_A_1000X_CONTROL1 0x10 +#define MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_FIBER_MODE 0x0001 +#define MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_TBI_IF 0x0002 +#define MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_SIGNAL_DETECT_EN 0x0004 +#define MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_INVERT_SIGNAL_DETECT 0x0008 +#define MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_AUTODET 0x0010 +#define MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_MSTR_MODE 0x0020 +#define MDIO_SERDES_DIGITAL_A_1000X_CONTROL2 0x11 +#define MDIO_SERDES_DIGITAL_A_1000X_CONTROL2_PRL_DT_EN 0x0001 +#define MDIO_SERDES_DIGITAL_A_1000X_CONTROL2_AN_FST_TMR 0x0040 +#define MDIO_SERDES_DIGITAL_A_1000X_STATUS1 0x14 +#define MDIO_SERDES_DIGITAL_A_1000X_STATUS1_DUPLEX 0x0004 +#define MDIO_SERDES_DIGITAL_A_1000X_STATUS1_SPEED_MASK 0x0018 +#define MDIO_SERDES_DIGITAL_A_1000X_STATUS1_SPEED_SHIFT 3 +#define MDIO_SERDES_DIGITAL_A_1000X_STATUS1_SPEED_2_5G 0x0018 +#define MDIO_SERDES_DIGITAL_A_1000X_STATUS1_SPEED_1G 0x0010 +#define MDIO_SERDES_DIGITAL_A_1000X_STATUS1_SPEED_100M 0x0008 +#define MDIO_SERDES_DIGITAL_A_1000X_STATUS1_SPEED_10M 0x0000 +#define MDIO_SERDES_DIGITAL_MISC1 0x18 +#define MDIO_SERDES_DIGITAL_MISC1_REFCLK_SEL_MASK 0xE000 +#define MDIO_SERDES_DIGITAL_MISC1_REFCLK_SEL_25M 0x0000 +#define MDIO_SERDES_DIGITAL_MISC1_REFCLK_SEL_100M 0x2000 +#define MDIO_SERDES_DIGITAL_MISC1_REFCLK_SEL_125M 0x4000 +#define MDIO_SERDES_DIGITAL_MISC1_REFCLK_SEL_156_25M 0x6000 +#define MDIO_SERDES_DIGITAL_MISC1_REFCLK_SEL_187_5M 0x8000 +#define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_SEL 0x0010 +#define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_MASK 0x000f +#define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_2_5G 0x0000 +#define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_5G 0x0001 +#define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_6G 0x0002 +#define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_10G_HIG 0x0003 +#define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_10G_CX4 0x0004 +#define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_12G 0x0005 +#define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_12_5G 0x0006 +#define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_13G 0x0007 +#define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_15G 0x0008 +#define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_16G 0x0009 #define MDIO_REG_BANK_OVER_1G 0x8320 -#define MDIO_OVER_1G_DIGCTL_3_4 0x14 -#define MDIO_OVER_1G_DIGCTL_3_4_MP_ID_MASK 0xffe0 -#define MDIO_OVER_1G_DIGCTL_3_4_MP_ID_SHIFT 5 -#define MDIO_OVER_1G_UP1 0x19 -#define MDIO_OVER_1G_UP1_2_5G 0x0001 -#define MDIO_OVER_1G_UP1_5G 0x0002 -#define MDIO_OVER_1G_UP1_6G 0x0004 -#define MDIO_OVER_1G_UP1_10G 0x0010 -#define MDIO_OVER_1G_UP1_10GH 0x0008 -#define MDIO_OVER_1G_UP1_12G 0x0020 -#define MDIO_OVER_1G_UP1_12_5G 0x0040 -#define MDIO_OVER_1G_UP1_13G 0x0080 -#define MDIO_OVER_1G_UP1_15G 0x0100 -#define MDIO_OVER_1G_UP1_16G 0x0200 -#define MDIO_OVER_1G_UP2 0x1A -#define MDIO_OVER_1G_UP2_IPREDRIVER_MASK 0x0007 -#define MDIO_OVER_1G_UP2_IDRIVER_MASK 0x0038 -#define MDIO_OVER_1G_UP2_PREEMPHASIS_MASK 0x03C0 -#define MDIO_OVER_1G_UP3 0x1B -#define MDIO_OVER_1G_UP3_HIGIG2 0x0001 -#define MDIO_OVER_1G_LP_UP1 0x1C -#define MDIO_OVER_1G_LP_UP2 0x1D -#define MDIO_OVER_1G_LP_UP2_MR_ADV_OVER_1G_MASK 0x03ff -#define MDIO_OVER_1G_LP_UP2_PREEMPHASIS_MASK 0x0780 -#define MDIO_OVER_1G_LP_UP2_PREEMPHASIS_SHIFT 7 -#define MDIO_OVER_1G_LP_UP3 0x1E +#define MDIO_OVER_1G_DIGCTL_3_4 0x14 +#define MDIO_OVER_1G_DIGCTL_3_4_MP_ID_MASK 0xffe0 +#define MDIO_OVER_1G_DIGCTL_3_4_MP_ID_SHIFT 5 +#define MDIO_OVER_1G_UP1 0x19 +#define MDIO_OVER_1G_UP1_2_5G 0x0001 +#define MDIO_OVER_1G_UP1_5G 0x0002 +#define MDIO_OVER_1G_UP1_6G 0x0004 +#define MDIO_OVER_1G_UP1_10G 0x0010 +#define MDIO_OVER_1G_UP1_10GH 0x0008 +#define MDIO_OVER_1G_UP1_12G 0x0020 +#define MDIO_OVER_1G_UP1_12_5G 0x0040 +#define MDIO_OVER_1G_UP1_13G 0x0080 +#define MDIO_OVER_1G_UP1_15G 0x0100 +#define MDIO_OVER_1G_UP1_16G 0x0200 +#define MDIO_OVER_1G_UP2 0x1A +#define MDIO_OVER_1G_UP2_IPREDRIVER_MASK 0x0007 +#define MDIO_OVER_1G_UP2_IDRIVER_MASK 0x0038 +#define MDIO_OVER_1G_UP2_PREEMPHASIS_MASK 0x03C0 +#define MDIO_OVER_1G_UP3 0x1B +#define MDIO_OVER_1G_UP3_HIGIG2 0x0001 +#define MDIO_OVER_1G_LP_UP1 0x1C +#define MDIO_OVER_1G_LP_UP2 0x1D +#define MDIO_OVER_1G_LP_UP2_MR_ADV_OVER_1G_MASK 0x03ff +#define MDIO_OVER_1G_LP_UP2_PREEMPHASIS_MASK 0x0780 +#define MDIO_OVER_1G_LP_UP2_PREEMPHASIS_SHIFT 7 +#define MDIO_OVER_1G_LP_UP3 0x1E #define MDIO_REG_BANK_BAM_NEXT_PAGE 0x8350 -#define MDIO_BAM_NEXT_PAGE_MP5_NEXT_PAGE_CTRL 0x10 -#define MDIO_BAM_NEXT_PAGE_MP5_NEXT_PAGE_CTRL_BAM_MODE 0x0001 -#define MDIO_BAM_NEXT_PAGE_MP5_NEXT_PAGE_CTRL_TETON_AN 0x0002 +#define MDIO_BAM_NEXT_PAGE_MP5_NEXT_PAGE_CTRL 0x10 +#define MDIO_BAM_NEXT_PAGE_MP5_NEXT_PAGE_CTRL_BAM_MODE 0x0001 +#define MDIO_BAM_NEXT_PAGE_MP5_NEXT_PAGE_CTRL_TETON_AN 0x0002 + +#define MDIO_REG_BANK_CL73_USERB0 0x8370 +#define MDIO_CL73_USERB0_CL73_BAM_CTRL1 0x12 +#define MDIO_CL73_USERB0_CL73_BAM_CTRL1_BAM_EN 0x8000 +#define MDIO_CL73_USERB0_CL73_BAM_CTRL1_BAM_STATION_MNGR_EN 0x4000 +#define MDIO_CL73_USERB0_CL73_BAM_CTRL1_BAM_NP_AFTER_BP_EN 0x2000 +#define MDIO_CL73_USERB0_CL73_BAM_CTRL3 0x14 +#define MDIO_CL73_USERB0_CL73_BAM_CTRL3_USE_CL73_HCD_MR 0x0001 + +#define MDIO_REG_BANK_AER_BLOCK 0xFFD0 +#define MDIO_AER_BLOCK_AER_REG 0x1E + +#define MDIO_REG_BANK_COMBO_IEEE0 0xFFE0 +#define MDIO_COMBO_IEEE0_MII_CONTROL 0x10 +#define MDIO_COMBO_IEEO_MII_CONTROL_MAN_SGMII_SP_MASK 0x2040 +#define MDIO_COMBO_IEEO_MII_CONTROL_MAN_SGMII_SP_10 0x0000 +#define MDIO_COMBO_IEEO_MII_CONTROL_MAN_SGMII_SP_100 0x2000 +#define MDIO_COMBO_IEEO_MII_CONTROL_MAN_SGMII_SP_1000 0x0040 +#define MDIO_COMBO_IEEO_MII_CONTROL_FULL_DUPLEX 0x0100 +#define MDIO_COMBO_IEEO_MII_CONTROL_RESTART_AN 0x0200 +#define MDIO_COMBO_IEEO_MII_CONTROL_AN_EN 0x1000 +#define MDIO_COMBO_IEEO_MII_CONTROL_LOOPBACK 0x4000 +#define MDIO_COMBO_IEEO_MII_CONTROL_RESET 0x8000 +#define MDIO_COMBO_IEEE0_MII_STATUS 0x11 +#define MDIO_COMBO_IEEE0_MII_STATUS_LINK_PASS 0x0004 +#define MDIO_COMBO_IEEE0_MII_STATUS_AUTONEG_COMPLETE 0x0020 +#define MDIO_COMBO_IEEE0_AUTO_NEG_ADV 0x14 +#define MDIO_COMBO_IEEE0_AUTO_NEG_ADV_FULL_DUPLEX 0x0020 +#define MDIO_COMBO_IEEE0_AUTO_NEG_ADV_HALF_DUPLEX 0x0040 +#define MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_MASK 0x0180 +#define MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_NONE 0x0000 +#define MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_SYMMETRIC 0x0080 +#define MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC 0x0100 +#define MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH 0x0180 +#define MDIO_COMBO_IEEE0_AUTO_NEG_ADV_NEXT_PAGE 0x8000 +#define MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1 0x15 +#define MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1_NEXT_PAGE 0x8000 +#define MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1_ACK 0x4000 +#define MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1_PAUSE_MASK 0x0180 +#define MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1_PAUSE_NONE 0x0000 +#define MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1_PAUSE_BOTH 0x0180 +#define MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1_HALF_DUP_CAP 0x0040 +#define MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1_FULL_DUP_CAP 0x0020 +/*WhenthelinkpartnerisinSGMIImode(bit0=1),then +bit15=link,bit12=duplex,bits11:10=speed,bit14=acknowledge. +Theotherbitsarereservedandshouldbezero*/ +#define MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1_SGMII_MODE 0x0001 + + +#define MDIO_PMA_DEVAD 0x1 +/*ieee*/ +#define MDIO_PMA_REG_CTRL 0x0 +#define MDIO_PMA_REG_STATUS 0x1 +#define MDIO_PMA_REG_10G_CTRL2 0x7 +#define MDIO_PMA_REG_RX_SD 0xa +/*bcm*/ +#define MDIO_PMA_REG_BCM_CTRL 0x0096 +#define MDIO_PMA_REG_FEC_CTRL 0x00ab +#define MDIO_PMA_REG_RX_ALARM_CTRL 0x9000 +#define MDIO_PMA_REG_LASI_CTRL 0x9002 +#define MDIO_PMA_REG_RX_ALARM 0x9003 +#define MDIO_PMA_REG_TX_ALARM 0x9004 +#define MDIO_PMA_REG_LASI_STATUS 0x9005 +#define MDIO_PMA_REG_PHY_IDENTIFIER 0xc800 +#define MDIO_PMA_REG_DIGITAL_CTRL 0xc808 +#define MDIO_PMA_REG_DIGITAL_STATUS 0xc809 +#define MDIO_PMA_REG_TX_POWER_DOWN 0xca02 +#define MDIO_PMA_REG_CMU_PLL_BYPASS 0xca09 +#define MDIO_PMA_REG_MISC_CTRL 0xca0a +#define MDIO_PMA_REG_GEN_CTRL 0xca10 +#define MDIO_PMA_REG_GEN_CTRL_ROM_RESET_INTERNAL_MP 0x0188 +#define MDIO_PMA_REG_GEN_CTRL_ROM_MICRO_RESET 0x018a +#define MDIO_PMA_REG_ROM_VER1 0xca19 +#define MDIO_PMA_REG_ROM_VER2 0xca1a +#define MDIO_PMA_REG_EDC_FFE_MAIN 0xca1b +#define MDIO_PMA_REG_PLL_BANDWIDTH 0xca1d +#define MDIO_PMA_REG_CDR_BANDWIDTH 0xca46 +#define MDIO_PMA_REG_MISC_CTRL1 0xca85 + +#define MDIO_PMA_REG_7101_RESET 0xc000 +#define MDIO_PMA_REG_7107_LED_CNTL 0xc007 +#define MDIO_PMA_REG_7101_VER1 0xc026 +#define MDIO_PMA_REG_7101_VER2 0xc027 + + +#define MDIO_WIS_DEVAD 0x2 +/*bcm*/ +#define MDIO_WIS_REG_LASI_CNTL 0x9002 +#define MDIO_WIS_REG_LASI_STATUS 0x9005 + +#define MDIO_PCS_DEVAD 0x3 +#define MDIO_PCS_REG_STATUS 0x0020 +#define MDIO_PCS_REG_LASI_STATUS 0x9005 +#define MDIO_PCS_REG_7101_DSP_ACCESS 0xD000 +#define MDIO_PCS_REG_7101_SPI_MUX 0xD008 +#define MDIO_PCS_REG_7101_SPI_CTRL_ADDR 0xE12A +#define MDIO_PCS_REG_7101_SPI_RESET_BIT (5) +#define MDIO_PCS_REG_7101_SPI_FIFO_ADDR 0xE02A +#define MDIO_PCS_REG_7101_SPI_FIFO_ADDR_WRITE_ENABLE_CMD (6) +#define MDIO_PCS_REG_7101_SPI_FIFO_ADDR_BULK_ERASE_CMD (0xC7) +#define MDIO_PCS_REG_7101_SPI_FIFO_ADDR_PAGE_PROGRAM_CMD (2) +#define MDIO_PCS_REG_7101_SPI_BYTES_TO_TRANSFER_ADDR 0xE028 + -#define MDIO_REG_BANK_CL73_USERB0 0x8370 -#define MDIO_CL73_USERB0_CL73_BAM_CTRL1 0x12 -#define MDIO_CL73_USERB0_CL73_BAM_CTRL1_BAM_EN 0x8000 -#define MDIO_CL73_USERB0_CL73_BAM_CTRL1_BAM_STATION_MNGR_EN 0x4000 -#define MDIO_CL73_USERB0_CL73_BAM_CTRL1_BAM_NP_AFTER_BP_EN 0x2000 -#define MDIO_CL73_USERB0_CL73_BAM_CTRL3 0x14 -#define MDIO_CL73_USERB0_CL73_BAM_CTRL3_USE_CL73_HCD_MR 0x0001 +#define MDIO_XS_DEVAD 0x4 +#define MDIO_XS_PLL_SEQUENCER 0x8000 +#define MDIO_XS_SFX7101_XGXS_TEST1 0xc00a -#define MDIO_REG_BANK_AER_BLOCK 0xFFD0 -#define MDIO_AER_BLOCK_AER_REG 0x1E +#define MDIO_AN_DEVAD 0x7 +/*ieee*/ +#define MDIO_AN_REG_CTRL 0x0000 +#define MDIO_AN_REG_STATUS 0x0001 +#define MDIO_AN_REG_STATUS_AN_COMPLETE 0x0020 +#define MDIO_AN_REG_ADV_PAUSE 0x0010 +#define MDIO_AN_REG_ADV_PAUSE_PAUSE 0x0400 +#define MDIO_AN_REG_ADV_PAUSE_ASYMMETRIC 0x0800 +#define MDIO_AN_REG_ADV_PAUSE_BOTH 0x0C00 +#define MDIO_AN_REG_ADV_PAUSE_MASK 0x0C00 +#define MDIO_AN_REG_ADV 0x0011 +#define MDIO_AN_REG_ADV2 0x0012 +#define MDIO_AN_REG_LP_AUTO_NEG 0x0013 +#define MDIO_AN_REG_MASTER_STATUS 0x0021 +/*bcm*/ +#define MDIO_AN_REG_LINK_STATUS 0x8304 +#define MDIO_AN_REG_CL37_CL73 0x8370 +#define MDIO_AN_REG_CL37_AN 0xffe0 +#define MDIO_AN_REG_CL37_FD 0xffe4 -#define MDIO_REG_BANK_COMBO_IEEE0 0xFFE0 -#define MDIO_COMBO_IEEE0_MII_CONTROL 0x10 -#define MDIO_COMBO_IEEO_MII_CONTROL_MAN_SGMII_SP_MASK 0x2040 -#define MDIO_COMBO_IEEO_MII_CONTROL_MAN_SGMII_SP_10 0x0000 -#define MDIO_COMBO_IEEO_MII_CONTROL_MAN_SGMII_SP_100 0x2000 -#define MDIO_COMBO_IEEO_MII_CONTROL_MAN_SGMII_SP_1000 0x0040 -#define MDIO_COMBO_IEEO_MII_CONTROL_FULL_DUPLEX 0x0100 -#define MDIO_COMBO_IEEO_MII_CONTROL_RESTART_AN 0x0200 -#define MDIO_COMBO_IEEO_MII_CONTROL_AN_EN 0x1000 -#define MDIO_COMBO_IEEO_MII_CONTROL_LOOPBACK 0x4000 -#define MDIO_COMBO_IEEO_MII_CONTROL_RESET 0x8000 -#define MDIO_COMBO_IEEE0_MII_STATUS 0x11 -#define MDIO_COMBO_IEEE0_MII_STATUS_LINK_PASS 0x0004 -#define MDIO_COMBO_IEEE0_MII_STATUS_AUTONEG_COMPLETE 0x0020 -#define MDIO_COMBO_IEEE0_AUTO_NEG_ADV 0x14 -#define MDIO_COMBO_IEEE0_AUTO_NEG_ADV_FULL_DUPLEX 0x0020 -#define MDIO_COMBO_IEEE0_AUTO_NEG_ADV_HALF_DUPLEX 0x0040 -#define MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_MASK 0x0180 -#define MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_NONE 0x0000 -#define MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_SYMMETRIC 0x0080 -#define MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC 0x0100 -#define MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH 0x0180 -#define MDIO_COMBO_IEEE0_AUTO_NEG_ADV_NEXT_PAGE 0x8000 -#define MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1 0x15 -#define MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1_NEXT_PAGE 0x8000 -#define MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1_ACK 0x4000 -#define MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1_PAUSE_MASK 0x0180 -#define MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1_PAUSE_NONE\ - 0x0000 -#define MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1_PAUSE_BOTH\ - 0x0180 -#define MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1_HALF_DUP_CAP 0x0040 -#define MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1_FULL_DUP_CAP 0x0020 -#define MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1_SGMII_MODE 0x0001 +#define IGU_FUNC_BASE 0x0400 -#define EXT_PHY_AUTO_NEG_DEVAD 0x7 -#define EXT_PHY_OPT_PMA_PMD_DEVAD 0x1 -#define EXT_PHY_OPT_WIS_DEVAD 0x2 -#define EXT_PHY_OPT_PCS_DEVAD 0x3 -#define EXT_PHY_OPT_PHY_XS_DEVAD 0x4 -#define EXT_PHY_OPT_CNTL 0x0 -#define EXT_PHY_OPT_CNTL2 0x7 -#define EXT_PHY_OPT_PMD_RX_SD 0xa -#define EXT_PHY_OPT_PMD_MISC_CNTL 0xca0a -#define EXT_PHY_OPT_PHY_IDENTIFIER 0xc800 -#define EXT_PHY_OPT_PMD_DIGITAL_CNT 0xc808 -#define EXT_PHY_OPT_PMD_DIGITAL_SATUS 0xc809 -#define EXT_PHY_OPT_CMU_PLL_BYPASS 0xca09 -#define EXT_PHY_OPT_LASI_CNTL 0x9002 -#define EXT_PHY_OPT_RX_ALARM 0x9003 -#define EXT_PHY_OPT_LASI_STATUS 0x9005 -#define EXT_PHY_OPT_PCS_STATUS 0x0020 -#define EXT_PHY_OPT_XGXS_LANE_STATUS 0x0018 -#define EXT_PHY_OPT_AN_LINK_STATUS 0x8304 -#define EXT_PHY_OPT_AN_CL37_CL73 0x8370 -#define EXT_PHY_OPT_AN_CL37_FD 0xffe4 -#define EXT_PHY_OPT_AN_CL37_AN 0xffe0 -#define EXT_PHY_OPT_AN_ADV 0x11 +#define IGU_ADDR_MSIX 0x0000 +#define IGU_ADDR_INT_ACK 0x0200 +#define IGU_ADDR_PROD_UPD 0x0201 +#define IGU_ADDR_ATTN_BITS_UPD 0x0202 +#define IGU_ADDR_ATTN_BITS_SET 0x0203 +#define IGU_ADDR_ATTN_BITS_CLR 0x0204 +#define IGU_ADDR_COALESCE_NOW 0x0205 +#define IGU_ADDR_SIMD_MASK 0x0206 +#define IGU_ADDR_SIMD_NOMASK 0x0207 +#define IGU_ADDR_MSI_CTL 0x0210 +#define IGU_ADDR_MSI_ADDR_LO 0x0211 +#define IGU_ADDR_MSI_ADDR_HI 0x0212 +#define IGU_ADDR_MSI_DATA 0x0213 -#define EXT_PHY_KR_PMA_PMD_DEVAD 0x1 -#define EXT_PHY_KR_PCS_DEVAD 0x3 -#define EXT_PHY_KR_AUTO_NEG_DEVAD 0x7 -#define EXT_PHY_KR_CTRL 0x0000 -#define EXT_PHY_KR_STATUS 0x0001 -#define EXT_PHY_KR_AUTO_NEG_COMPLETE 0x0020 -#define EXT_PHY_KR_AUTO_NEG_ADVERT 0x0010 -#define EXT_PHY_KR_AUTO_NEG_ADVERT_PAUSE 0x0400 -#define EXT_PHY_KR_AUTO_NEG_ADVERT_PAUSE_ASYMMETRIC 0x0800 -#define EXT_PHY_KR_AUTO_NEG_ADVERT_PAUSE_BOTH 0x0C00 -#define EXT_PHY_KR_AUTO_NEG_ADVERT_PAUSE_MASK 0x0C00 -#define EXT_PHY_KR_LP_AUTO_NEG 0x0013 -#define EXT_PHY_KR_CTRL2 0x0007 -#define EXT_PHY_KR_PCS_STATUS 0x0020 -#define EXT_PHY_KR_PMD_CTRL 0x0096 -#define EXT_PHY_KR_LASI_CNTL 0x9002 -#define EXT_PHY_KR_LASI_STATUS 0x9005 -#define EXT_PHY_KR_MISC_CTRL1 0xca85 -#define EXT_PHY_KR_GEN_CTRL 0xca10 -#define EXT_PHY_KR_ROM_CODE 0xca19 -#define EXT_PHY_KR_ROM_RESET_INTERNAL_MP 0x0188 -#define EXT_PHY_KR_ROM_MICRO_RESET 0x018a +#define IGU_INT_ENABLE 0 +#define IGU_INT_DISABLE 1 +#define IGU_INT_NOP 2 +#define IGU_INT_NOP2 3 -#define EXT_PHY_SFX7101_XGXS_TEST1 0xc00a -- cgit v1.2.3