From e5e97ee956d8c5ed2fc5877d29dee17a6a59de8e Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Mon, 6 Jan 2014 10:07:29 -0600 Subject: hso: fix handling of modem port SERIAL_STATE notifications The existing serial state notification handling expected older Option devices, having a hardcoded assumption that the Modem port was always USB interface #2. That isn't true for devices from the past few years. hso_serial_state_notification is a local cache of a USB Communications Interface Class SERIAL_STATE notification from the device, and the USB CDC specification (section 6.3, table 67 "Class-Specific Notifications") defines wIndex as the USB interface the event applies to. For hso devices this will always be the Modem port, as the Modem port is the only port which is set up to receive them by the driver. So instead of always expecting USB interface #2, instead validate the notification with the actual USB interface number of the Modem port. Signed-off-by: Dan Williams Tested-by: H. Nikolaus Schaller Signed-off-by: David S. Miller --- drivers/net/usb/hso.c | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-) (limited to 'drivers/net/usb/hso.c') diff --git a/drivers/net/usb/hso.c b/drivers/net/usb/hso.c index 86292e6aaf49..1a482344b3f5 100644 --- a/drivers/net/usb/hso.c +++ b/drivers/net/usb/hso.c @@ -185,7 +185,6 @@ enum rx_ctrl_state{ #define BM_REQUEST_TYPE (0xa1) #define B_NOTIFICATION (0x20) #define W_VALUE (0x0) -#define W_INDEX (0x2) #define W_LENGTH (0x2) #define B_OVERRUN (0x1<<6) @@ -1487,6 +1486,7 @@ static void tiocmget_intr_callback(struct urb *urb) struct uart_icount *icount; struct hso_serial_state_notification *serial_state_notification; struct usb_device *usb; + int if_num; /* Sanity checks */ if (!serial) @@ -1495,15 +1495,24 @@ static void tiocmget_intr_callback(struct urb *urb) handle_usb_error(status, __func__, serial->parent); return; } + + /* tiocmget is only supported on HSO_PORT_MODEM */ tiocmget = serial->tiocmget; if (!tiocmget) return; + BUG_ON((serial->parent->port_spec & HSO_PORT_MASK) != HSO_PORT_MODEM); + usb = serial->parent->usb; + if_num = serial->parent->interface->altsetting->desc.bInterfaceNumber; + + /* wIndex should be the USB interface number of the port to which the + * notification applies, which should always be the Modem port. + */ serial_state_notification = &tiocmget->serial_state_notification; if (serial_state_notification->bmRequestType != BM_REQUEST_TYPE || serial_state_notification->bNotification != B_NOTIFICATION || le16_to_cpu(serial_state_notification->wValue) != W_VALUE || - le16_to_cpu(serial_state_notification->wIndex) != W_INDEX || + le16_to_cpu(serial_state_notification->wIndex) != if_num || le16_to_cpu(serial_state_notification->wLength) != W_LENGTH) { dev_warn(&usb->dev, "hso received invalid serial state notification\n"); -- cgit v1.2.3