From f3dc1586375c3fa061c4867e8b076d09a53beb03 Mon Sep 17 00:00:00 2001 From: Sebastian Pöhn Date: Fri, 15 Jul 2011 16:00:20 -0700 Subject: gianfar: rx parser Only let the rx parser be enabled if it is necessary (if VLAN extraction, IP or TCP checksumming or the rx queue filer are enabled). Otherwise disable it. The new routine gfar_check_rx_parser_mode should be run after every change on this features and will enable/disable the parser as necessary. Signed-off-by: Jiri Pirko Signed-off-by: Sebastian Poehn Signed-off-by: David S. Miller --- drivers/net/gianfar.c | 24 +++++++++++++++++++----- 1 file changed, 19 insertions(+), 5 deletions(-) (limited to 'drivers/net/gianfar.c') diff --git a/drivers/net/gianfar.c b/drivers/net/gianfar.c index 2dfcc8047847..dfa55f94ba7f 100644 --- a/drivers/net/gianfar.c +++ b/drivers/net/gianfar.c @@ -2289,6 +2289,23 @@ static int gfar_set_mac_address(struct net_device *dev) return 0; } +/* Check if rx parser should be activated */ +void gfar_check_rx_parser_mode(struct gfar_private *priv) +{ + struct gfar __iomem *regs; + u32 tempval; + + regs = priv->gfargrp[0].regs; + + tempval = gfar_read(®s->rctrl); + /* If parse is no longer required, then disable parser */ + if (tempval & RCTRL_REQ_PARSER) + tempval |= RCTRL_PRSDEP_INIT; + else + tempval &= ~RCTRL_PRSDEP_INIT; + gfar_write(®s->rctrl, tempval); +} + /* Enables and disables VLAN insertion/extraction */ static void gfar_vlan_rx_register(struct net_device *dev, @@ -2325,12 +2342,9 @@ static void gfar_vlan_rx_register(struct net_device *dev, /* Disable VLAN tag extraction */ tempval = gfar_read(®s->rctrl); tempval &= ~RCTRL_VLEX; - /* If parse is no longer required, then disable parser */ - if (tempval & RCTRL_REQ_PARSER) - tempval |= RCTRL_PRSDEP_INIT; - else - tempval &= ~RCTRL_PRSDEP_INIT; gfar_write(®s->rctrl, tempval); + + gfar_check_rx_parser_mode(priv); } gfar_change_mtu(dev, dev->mtu); -- cgit v1.2.3