From 5eb32bd059379530fc3809a7fcf183feca75f601 Mon Sep 17 00:00:00 2001 From: Baruch Siach Date: Mon, 24 May 2010 00:36:13 -0700 Subject: fec: add support for PHY interface platform data The i.MX25 PDK uses RMII to communicate with its PHY. This patch adds the ability to configure RMII, based on platform data. Signed-off-by: Baruch Siach Acked-by: Greg Ungerer Signed-off-by: David S. Miller --- drivers/net/fec.c | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) (limited to 'drivers/net/fec.c') diff --git a/drivers/net/fec.c b/drivers/net/fec.c index 42d9ac9ba395..326465ffbb23 100644 --- a/drivers/net/fec.c +++ b/drivers/net/fec.c @@ -41,6 +41,7 @@ #include #include #include +#include #include @@ -182,6 +183,7 @@ struct fec_enet_private { struct phy_device *phy_dev; int mii_timeout; uint phy_speed; + phy_interface_t phy_interface; int index; int link; int full_duplex; @@ -1191,6 +1193,21 @@ fec_restart(struct net_device *dev, int duplex) /* Set MII speed */ writel(fep->phy_speed, fep->hwp + FEC_MII_SPEED); +#ifdef FEC_MIIGSK_ENR + if (fep->phy_interface == PHY_INTERFACE_MODE_RMII) { + /* disable the gasket and wait */ + writel(0, fep->hwp + FEC_MIIGSK_ENR); + while (readl(fep->hwp + FEC_MIIGSK_ENR) & 4) + udelay(1); + + /* configure the gasket: RMII, 50 MHz, no loopback, no echo */ + writel(1, fep->hwp + FEC_MIIGSK_CFGR); + + /* re-enable the gasket */ + writel(2, fep->hwp + FEC_MIIGSK_ENR); + } +#endif + /* And last, enable the transmit and receive processing */ writel(2, fep->hwp + FEC_ECNTRL); writel(0, fep->hwp + FEC_R_DES_ACTIVE); @@ -1226,6 +1243,7 @@ static int __devinit fec_probe(struct platform_device *pdev) { struct fec_enet_private *fep; + struct fec_platform_data *pdata; struct net_device *ndev; int i, irq, ret = 0; struct resource *r; @@ -1259,6 +1277,10 @@ fec_probe(struct platform_device *pdev) platform_set_drvdata(pdev, ndev); + pdata = pdev->dev.platform_data; + if (pdata) + fep->phy_interface = pdata->phy; + /* This device has up to three irqs on some platforms */ for (i = 0; i < 3; i++) { irq = platform_get_irq(pdev, i); -- cgit v1.2.3