From 1de25c6b984d71a7961065e27514b4fd51b2daae Mon Sep 17 00:00:00 2001 From: Konrad Knitter Date: Wed, 6 Nov 2024 10:36:43 +0100 Subject: ice: support FW Recovery Mode Recovery Mode is intended to recover from a fatal failure scenario in which the device is not accessible to the host, meaning the firmware is non-responsive. The purpose of the Firmware Recovery Mode is to enable software tools to update firmware and/or device configuration so the fatal error can be resolved. Recovery Mode Firmware supports a limited set of admin commands required for NVM update. Recovery Firmware does not support hardware interrupts so a polling mode is used. The driver will expose only the minimum set of devlink commands required for the recovery of the adapter. Using an appropriate NVM image, the user can recover the adapter using the devlink flash API. Prior to 4.20 E810 Adapter Recovery Firmware supports only the update and erase of the "fw.mgmt" component. E810 Adapter Recovery Firmware doesn't support selected preservation of cards settings or identifiers. The following command can be used to recover the adapter: $ devlink dev flash component fw.mgmt overwrite settings overwrite identifier Newer FW versions (4.20 or newer) supports update of "fw.undi" and "fw.netlist" components. $ devlink dev flash Tested on Intel Corporation Ethernet Controller E810-C for SFP FW revision 3.20 and 4.30. Reviewed-by: Przemek Kitszel Signed-off-by: Konrad Knitter Tested-by: Pucha Himasekhar Reddy (A Contingent worker at Intel) Signed-off-by: Tony Nguyen --- drivers/net/ethernet/intel/ice/ice_fw_update.c | 14 +++++++++++++- 1 file changed, 13 insertions(+), 1 deletion(-) (limited to 'drivers/net/ethernet/intel/ice/ice_fw_update.c') diff --git a/drivers/net/ethernet/intel/ice/ice_fw_update.c b/drivers/net/ethernet/intel/ice/ice_fw_update.c index 2702a0da5c3e..70c201f569ce 100644 --- a/drivers/net/ethernet/intel/ice/ice_fw_update.c +++ b/drivers/net/ethernet/intel/ice/ice_fw_update.c @@ -6,6 +6,7 @@ #include #include #include "ice.h" +#include "ice_lib.h" #include "ice_fw_update.h" struct ice_fwu_priv { @@ -125,6 +126,10 @@ ice_check_component_response(struct ice_pf *pf, u16 id, u8 response, u8 code, case ICE_AQ_NVM_PASS_COMP_CAN_NOT_BE_UPDATED: dev_info(dev, "firmware has rejected updating %s\n", component); break; + case ICE_AQ_NVM_PASS_COMP_PARTIAL_CHECK: + if (ice_is_recovery_mode(&pf->hw)) + return 0; + break; } switch (code) { @@ -1004,13 +1009,20 @@ int ice_devlink_flash_update(struct devlink *devlink, return -EOPNOTSUPP; } - if (!hw->dev_caps.common_cap.nvm_unified_update) { + if (!hw->dev_caps.common_cap.nvm_unified_update && !ice_is_recovery_mode(hw)) { NL_SET_ERR_MSG_MOD(extack, "Current firmware does not support unified update"); return -EOPNOTSUPP; } memset(&priv, 0, sizeof(priv)); + if (params->component && strcmp(params->component, "fw.mgmt") == 0) { + priv.context.mode = PLDMFW_UPDATE_MODE_SINGLE_COMPONENT; + priv.context.component_identifier = NVM_COMP_ID_NVM; + } else if (params->component) { + return -EOPNOTSUPP; + } + /* the E822 device needs a slightly different ops */ if (hw->mac_type == ICE_MAC_GENERIC) priv.context.ops = &ice_fwu_ops_e822; -- cgit v1.2.3