From 159a07604a99bd01e7db112de08d53dc4fcad109 Mon Sep 17 00:00:00 2001 From: Quentin Schulz Date: Tue, 23 May 2017 11:48:08 +0200 Subject: net: fec: add post PHY reset delay DT property Some PHY require to wait for a bit after the reset GPIO has been toggled. This adds support for the DT property `phy-reset-post-delay` which gives the delay in milliseconds to wait after reset. If the DT property is not given, no delay is observed. Post reset delay greater than 1000ms are invalid. Signed-off-by: Quentin Schulz Reviewed-by: Andrew Lunn Acked-by: Fugang Duan Signed-off-by: David S. Miller --- drivers/net/ethernet/freescale/fec_main.c | 16 +++++++++++++++- 1 file changed, 15 insertions(+), 1 deletion(-) (limited to 'drivers/net/ethernet/freescale') diff --git a/drivers/net/ethernet/freescale/fec_main.c b/drivers/net/ethernet/freescale/fec_main.c index 56a563f90b0b..f7c8649fd28f 100644 --- a/drivers/net/ethernet/freescale/fec_main.c +++ b/drivers/net/ethernet/freescale/fec_main.c @@ -3192,7 +3192,7 @@ static int fec_reset_phy(struct platform_device *pdev) { int err, phy_reset; bool active_high = false; - int msec = 1; + int msec = 1, phy_post_delay = 0; struct device_node *np = pdev->dev.of_node; if (!np) @@ -3209,6 +3209,11 @@ static int fec_reset_phy(struct platform_device *pdev) else if (!gpio_is_valid(phy_reset)) return 0; + err = of_property_read_u32(np, "phy-reset-post-delay", &phy_post_delay); + /* valid reset duration should be less than 1s */ + if (!err && phy_post_delay > 1000) + return -EINVAL; + active_high = of_property_read_bool(np, "phy-reset-active-high"); err = devm_gpio_request_one(&pdev->dev, phy_reset, @@ -3226,6 +3231,15 @@ static int fec_reset_phy(struct platform_device *pdev) gpio_set_value_cansleep(phy_reset, !active_high); + if (!phy_post_delay) + return 0; + + if (phy_post_delay > 20) + msleep(phy_post_delay); + else + usleep_range(phy_post_delay * 1000, + phy_post_delay * 1000 + 1000); + return 0; } #else /* CONFIG_OF */ -- cgit v1.2.3