From 786baecfe78f8e25547c628b48a60fc8e5636056 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Thu, 14 Jun 2012 16:35:56 -0300 Subject: [media] dvb-usb: move it to drivers/media/usb/dvb-usb As media/dvb will be removed, move it to a proper place. Signed-off-by: Mauro Carvalho Chehab --- drivers/media/usb/dvb-usb/digitv.h | 66 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 66 insertions(+) create mode 100644 drivers/media/usb/dvb-usb/digitv.h (limited to 'drivers/media/usb/dvb-usb/digitv.h') diff --git a/drivers/media/usb/dvb-usb/digitv.h b/drivers/media/usb/dvb-usb/digitv.h new file mode 100644 index 000000000000..908c09f4966b --- /dev/null +++ b/drivers/media/usb/dvb-usb/digitv.h @@ -0,0 +1,66 @@ +#ifndef _DVB_USB_DIGITV_H_ +#define _DVB_USB_DIGITV_H_ + +#define DVB_USB_LOG_PREFIX "digitv" +#include "dvb-usb.h" + +struct digitv_state { + int is_nxt6000; +}; + +/* protocol (from usblogging and the SDK: + * + * Always 7 bytes bulk message(s) for controlling + * + * First byte describes the command. Reads are 2 consecutive transfer (as always). + * + * General structure: + * + * write or first message of a read: + * VV B0 B1 B2 B3 + * + * second message of a read + * VV R0 R1 R2 R3 + * + * whereas 0 < len <= 4 + * + * I2C address is stored somewhere inside the device. + * + * 0x01 read from EEPROM + * VV = offset; B* = 0; R* = value(s) + * + * 0x02 read register of the COFDM + * VV = register; B* = 0; R* = value(s) + * + * 0x05 write register of the COFDM + * VV = register; B* = value(s); + * + * 0x06 write to the tuner (only for NXT6000) + * VV = 0; B* = PLL data; len = 4; + * + * 0x03 read remote control + * VV = 0; B* = 0; len = 4; R* = key + * + * 0x07 write to the remote (don't know why one should this, resetting ?) + * VV = 0; B* = key; len = 4; + * + * 0x08 write remote type + * VV = 0; B[0] = 0x01, len = 4 + * + * 0x09 write device init + * TODO + */ +#define USB_READ_EEPROM 1 + +#define USB_READ_COFDM 2 +#define USB_WRITE_COFDM 5 + +#define USB_WRITE_TUNER 6 + +#define USB_READ_REMOTE 3 +#define USB_WRITE_REMOTE 7 +#define USB_WRITE_REMOTE_TYPE 8 + +#define USB_DEV_INIT 9 + +#endif -- cgit v1.2.3