From 7c62f5a11c2c7f5a6a93a41d5fb1084ebd125d9a Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Sat, 15 Dec 2012 23:34:09 -0300 Subject: [media] cx23885: add basic DVB-S2 support for Hauppauge HVR-4400 Add basic DVB-S2 support for the Hauppauge HVR-4400 PCIe board. Thanks to Antti Palosaari and Devin Heitmueller for their suggestions and testing. Signed-off-by: Michael Krufky Reviewed-by: Devin Heitmueller Reviewed-by: Antti Palosaari Signed-off-by: Mauro Carvalho Chehab --- drivers/media/pci/cx23885/cx23885-cards.c | 38 ++++++++++++++++++++++++++++++- 1 file changed, 37 insertions(+), 1 deletion(-) (limited to 'drivers/media/pci/cx23885/cx23885-cards.c') diff --git a/drivers/media/pci/cx23885/cx23885-cards.c b/drivers/media/pci/cx23885/cx23885-cards.c index 6277e145f0b8..7a79a17105c4 100644 --- a/drivers/media/pci/cx23885/cx23885-cards.c +++ b/drivers/media/pci/cx23885/cx23885-cards.c @@ -572,7 +572,11 @@ struct cx23885_board cx23885_boards[] = { [CX23885_BOARD_PROF_8000] = { .name = "Prof Revolution DVB-S2 8000", .portb = CX23885_MPEG_DVB, - } + }, + [CX23885_BOARD_HAUPPAUGE_HVR4400] = { + .name = "Hauppauge WinTV-HVR4400", + .portb = CX23885_MPEG_DVB, + }, }; const unsigned int cx23885_bcount = ARRAY_SIZE(cx23885_boards); @@ -788,6 +792,22 @@ struct cx23885_subid cx23885_subids[] = { .subvendor = 0x8000, .subdevice = 0x3034, .card = CX23885_BOARD_PROF_8000, + }, { + .subvendor = 0x0070, + .subdevice = 0xc108, + .card = CX23885_BOARD_HAUPPAUGE_HVR4400, + }, { + .subvendor = 0x0070, + .subdevice = 0xc138, + .card = CX23885_BOARD_HAUPPAUGE_HVR4400, + }, { + .subvendor = 0x0070, + .subdevice = 0xc12a, + .card = CX23885_BOARD_HAUPPAUGE_HVR4400, + }, { + .subvendor = 0x0070, + .subdevice = 0xc1f8, + .card = CX23885_BOARD_HAUPPAUGE_HVR4400, }, }; const unsigned int cx23885_idcount = ARRAY_SIZE(cx23885_subids); @@ -1301,6 +1321,16 @@ void cx23885_gpio_setup(struct cx23885_dev *dev) /* enable irq */ cx_write(GPIO_ISM, 0x00000000);/* INTERRUPTS active low*/ break; + case CX23885_BOARD_HAUPPAUGE_HVR4400: + /* GPIO-8 tda10071 demod reset */ + + /* Put the parts into reset and back */ + cx23885_gpio_enable(dev, GPIO_8, 1); + cx23885_gpio_clear(dev, GPIO_8); + mdelay(100); + cx23885_gpio_set(dev, GPIO_8); + mdelay(100); + break; } } @@ -1509,6 +1539,7 @@ void cx23885_card_setup(struct cx23885_dev *dev) case CX23885_BOARD_HAUPPAUGE_HVR1210: case CX23885_BOARD_HAUPPAUGE_HVR1850: case CX23885_BOARD_HAUPPAUGE_HVR1290: + case CX23885_BOARD_HAUPPAUGE_HVR4400: if (dev->i2c_bus[0].i2c_rc == 0) hauppauge_eeprom(dev, eeprom+0xc0); break; @@ -1581,6 +1612,11 @@ void cx23885_card_setup(struct cx23885_dev *dev) ts2->ts_clk_en_val = 0x1; /* Enable TS_CLK */ ts2->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO; break; + case CX23885_BOARD_HAUPPAUGE_HVR4400: + ts1->gen_ctrl_val = 0xc; /* Serial bus + punctured clock */ + ts1->ts_clk_en_val = 0x1; /* Enable TS_CLK */ + ts1->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO; + break; case CX23885_BOARD_HAUPPAUGE_HVR1250: case CX23885_BOARD_HAUPPAUGE_HVR1500: case CX23885_BOARD_HAUPPAUGE_HVR1500Q: -- cgit v1.2.3