From 4b3ab9372ffa569827c8f7b7ffc7b69ba544a3bd Mon Sep 17 00:00:00 2001 From: Vignesh R Date: Mon, 3 Dec 2018 13:31:18 +0530 Subject: iio: adc: ti_am335x_tscadc: Improve accuracy of measurement When performing single ended measurements with TSCADC, its recommended to set negative input (SEL_INM_SWC_3_0) of ADC step to ADC's VREFN in the corresponding STEP_CONFIGx register. Also, the positive(SEL_RFP_SWC_2_0) and negative(SEL_RFM_SWC_1_0) reference voltage for ADC step needs to be set to VREFP and VREFN respectively in STEP_CONFIGx register. Without these changes, there may be variation of as much as ~2% in the ADC's digital output which is bad for precise measurement. Signed-off-by: Vignesh R Acked-by: Jonathan Cameron Signed-off-by: Lee Jones --- drivers/iio/adc/ti_am335x_adc.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'drivers/iio') diff --git a/drivers/iio/adc/ti_am335x_adc.c b/drivers/iio/adc/ti_am335x_adc.c index cafb1dcadc48..9d984f2a8ba7 100644 --- a/drivers/iio/adc/ti_am335x_adc.c +++ b/drivers/iio/adc/ti_am335x_adc.c @@ -142,7 +142,10 @@ static void tiadc_step_config(struct iio_dev *indio_dev) stepconfig |= STEPCONFIG_MODE_SWCNT; tiadc_writel(adc_dev, REG_STEPCONFIG(steps), - stepconfig | STEPCONFIG_INP(chan)); + stepconfig | STEPCONFIG_INP(chan) | + STEPCONFIG_INM_ADCREFM | + STEPCONFIG_RFP_VREFP | + STEPCONFIG_RFM_VREFN); if (adc_dev->open_delay[i] > STEPDELAY_OPEN_MASK) { dev_warn(dev, "chan %d open delay truncating to 0x3FFFF\n", -- cgit v1.2.3