From 97df55661a2d60e6554ce9a9ee6fb47606ddc772 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Thu, 3 Jul 2014 21:51:43 +0800 Subject: hwmon: (adm1026) Avoid forward declaration Reorder functions to avoid forward declaration. Signed-off-by: Axel Lin Signed-off-by: Guenter Roeck --- drivers/hwmon/adm1026.c | 452 +++++++++++++++++++++++------------------------- 1 file changed, 219 insertions(+), 233 deletions(-) (limited to 'drivers/hwmon/adm1026.c') diff --git a/drivers/hwmon/adm1026.c b/drivers/hwmon/adm1026.c index b3498acb9ab4..cf3ed29943f3 100644 --- a/drivers/hwmon/adm1026.c +++ b/drivers/hwmon/adm1026.c @@ -298,37 +298,6 @@ struct adm1026_data { u8 config3; /* Register value */ }; -static int adm1026_probe(struct i2c_client *client, - const struct i2c_device_id *id); -static int adm1026_detect(struct i2c_client *client, - struct i2c_board_info *info); -static int adm1026_remove(struct i2c_client *client); -static int adm1026_read_value(struct i2c_client *client, u8 reg); -static int adm1026_write_value(struct i2c_client *client, u8 reg, int value); -static void adm1026_print_gpio(struct i2c_client *client); -static void adm1026_fixup_gpio(struct i2c_client *client); -static struct adm1026_data *adm1026_update_device(struct device *dev); -static void adm1026_init_client(struct i2c_client *client); - - -static const struct i2c_device_id adm1026_id[] = { - { "adm1026", 0 }, - { } -}; -MODULE_DEVICE_TABLE(i2c, adm1026_id); - -static struct i2c_driver adm1026_driver = { - .class = I2C_CLASS_HWMON, - .driver = { - .name = "adm1026", - }, - .probe = adm1026_probe, - .remove = adm1026_remove, - .id_table = adm1026_id, - .detect = adm1026_detect, - .address_list = normal_i2c, -}; - static int adm1026_read_value(struct i2c_client *client, u8 reg) { int res; @@ -357,208 +326,6 @@ static int adm1026_write_value(struct i2c_client *client, u8 reg, int value) return res; } -static void adm1026_init_client(struct i2c_client *client) -{ - int value, i; - struct adm1026_data *data = i2c_get_clientdata(client); - - dev_dbg(&client->dev, "Initializing device\n"); - /* Read chip config */ - data->config1 = adm1026_read_value(client, ADM1026_REG_CONFIG1); - data->config2 = adm1026_read_value(client, ADM1026_REG_CONFIG2); - data->config3 = adm1026_read_value(client, ADM1026_REG_CONFIG3); - - /* Inform user of chip config */ - dev_dbg(&client->dev, "ADM1026_REG_CONFIG1 is: 0x%02x\n", - data->config1); - if ((data->config1 & CFG1_MONITOR) == 0) { - dev_dbg(&client->dev, - "Monitoring not currently enabled.\n"); - } - if (data->config1 & CFG1_INT_ENABLE) { - dev_dbg(&client->dev, - "SMBALERT interrupts are enabled.\n"); - } - if (data->config1 & CFG1_AIN8_9) { - dev_dbg(&client->dev, - "in8 and in9 enabled. temp3 disabled.\n"); - } else { - dev_dbg(&client->dev, - "temp3 enabled. in8 and in9 disabled.\n"); - } - if (data->config1 & CFG1_THERM_HOT) { - dev_dbg(&client->dev, - "Automatic THERM, PWM, and temp limits enabled.\n"); - } - - if (data->config3 & CFG3_GPIO16_ENABLE) { - dev_dbg(&client->dev, - "GPIO16 enabled. THERM pin disabled.\n"); - } else { - dev_dbg(&client->dev, - "THERM pin enabled. GPIO16 disabled.\n"); - } - if (data->config3 & CFG3_VREF_250) - dev_dbg(&client->dev, "Vref is 2.50 Volts.\n"); - else - dev_dbg(&client->dev, "Vref is 1.82 Volts.\n"); - /* Read and pick apart the existing GPIO configuration */ - value = 0; - for (i = 0; i <= 15; ++i) { - if ((i & 0x03) == 0) { - value = adm1026_read_value(client, - ADM1026_REG_GPIO_CFG_0_3 + i / 4); - } - data->gpio_config[i] = value & 0x03; - value >>= 2; - } - data->gpio_config[16] = (data->config3 >> 6) & 0x03; - - /* ... and then print it */ - adm1026_print_gpio(client); - - /* - * If the user asks us to reprogram the GPIO config, then - * do it now. - */ - if (gpio_input[0] != -1 || gpio_output[0] != -1 - || gpio_inverted[0] != -1 || gpio_normal[0] != -1 - || gpio_fan[0] != -1) { - adm1026_fixup_gpio(client); - } - - /* - * WE INTENTIONALLY make no changes to the limits, - * offsets, pwms, fans and zones. If they were - * configured, we don't want to mess with them. - * If they weren't, the default is 100% PWM, no - * control and will suffice until 'sensors -s' - * can be run by the user. We DO set the default - * value for pwm1.auto_pwm_min to its maximum - * so that enabling automatic pwm fan control - * without first setting a value for pwm1.auto_pwm_min - * will not result in potentially dangerous fan speed decrease. - */ - data->pwm1.auto_pwm_min = 255; - /* Start monitoring */ - value = adm1026_read_value(client, ADM1026_REG_CONFIG1); - /* Set MONITOR, clear interrupt acknowledge and s/w reset */ - value = (value | CFG1_MONITOR) & (~CFG1_INT_CLEAR & ~CFG1_RESET); - dev_dbg(&client->dev, "Setting CONFIG to: 0x%02x\n", value); - data->config1 = value; - adm1026_write_value(client, ADM1026_REG_CONFIG1, value); - - /* initialize fan_div[] to hardware defaults */ - value = adm1026_read_value(client, ADM1026_REG_FAN_DIV_0_3) | - (adm1026_read_value(client, ADM1026_REG_FAN_DIV_4_7) << 8); - for (i = 0; i <= 7; ++i) { - data->fan_div[i] = DIV_FROM_REG(value & 0x03); - value >>= 2; - } -} - -static void adm1026_print_gpio(struct i2c_client *client) -{ - struct adm1026_data *data = i2c_get_clientdata(client); - int i; - - dev_dbg(&client->dev, "GPIO config is:\n"); - for (i = 0; i <= 7; ++i) { - if (data->config2 & (1 << i)) { - dev_dbg(&client->dev, "\t%sGP%s%d\n", - data->gpio_config[i] & 0x02 ? "" : "!", - data->gpio_config[i] & 0x01 ? "OUT" : "IN", - i); - } else { - dev_dbg(&client->dev, "\tFAN%d\n", i); - } - } - for (i = 8; i <= 15; ++i) { - dev_dbg(&client->dev, "\t%sGP%s%d\n", - data->gpio_config[i] & 0x02 ? "" : "!", - data->gpio_config[i] & 0x01 ? "OUT" : "IN", - i); - } - if (data->config3 & CFG3_GPIO16_ENABLE) { - dev_dbg(&client->dev, "\t%sGP%s16\n", - data->gpio_config[16] & 0x02 ? "" : "!", - data->gpio_config[16] & 0x01 ? "OUT" : "IN"); - } else { - /* GPIO16 is THERM */ - dev_dbg(&client->dev, "\tTHERM\n"); - } -} - -static void adm1026_fixup_gpio(struct i2c_client *client) -{ - struct adm1026_data *data = i2c_get_clientdata(client); - int i; - int value; - - /* Make the changes requested. */ - /* - * We may need to unlock/stop monitoring or soft-reset the - * chip before we can make changes. This hasn't been - * tested much. FIXME - */ - - /* Make outputs */ - for (i = 0; i <= 16; ++i) { - if (gpio_output[i] >= 0 && gpio_output[i] <= 16) - data->gpio_config[gpio_output[i]] |= 0x01; - /* if GPIO0-7 is output, it isn't a FAN tach */ - if (gpio_output[i] >= 0 && gpio_output[i] <= 7) - data->config2 |= 1 << gpio_output[i]; - } - - /* Input overrides output */ - for (i = 0; i <= 16; ++i) { - if (gpio_input[i] >= 0 && gpio_input[i] <= 16) - data->gpio_config[gpio_input[i]] &= ~0x01; - /* if GPIO0-7 is input, it isn't a FAN tach */ - if (gpio_input[i] >= 0 && gpio_input[i] <= 7) - data->config2 |= 1 << gpio_input[i]; - } - - /* Inverted */ - for (i = 0; i <= 16; ++i) { - if (gpio_inverted[i] >= 0 && gpio_inverted[i] <= 16) - data->gpio_config[gpio_inverted[i]] &= ~0x02; - } - - /* Normal overrides inverted */ - for (i = 0; i <= 16; ++i) { - if (gpio_normal[i] >= 0 && gpio_normal[i] <= 16) - data->gpio_config[gpio_normal[i]] |= 0x02; - } - - /* Fan overrides input and output */ - for (i = 0; i <= 7; ++i) { - if (gpio_fan[i] >= 0 && gpio_fan[i] <= 7) - data->config2 &= ~(1 << gpio_fan[i]); - } - - /* Write new configs to registers */ - adm1026_write_value(client, ADM1026_REG_CONFIG2, data->config2); - data->config3 = (data->config3 & 0x3f) - | ((data->gpio_config[16] & 0x03) << 6); - adm1026_write_value(client, ADM1026_REG_CONFIG3, data->config3); - for (i = 15, value = 0; i >= 0; --i) { - value <<= 2; - value |= data->gpio_config[i] & 0x03; - if ((i & 0x03) == 0) { - adm1026_write_value(client, - ADM1026_REG_GPIO_CFG_0_3 + i/4, - value); - value = 0; - } - } - - /* Print the new config */ - adm1026_print_gpio(client); -} - - static struct adm1026_data *adm1026_update_device(struct device *dev) { struct i2c_client *client = to_i2c_client(dev); @@ -1829,6 +1596,207 @@ static int adm1026_detect(struct i2c_client *client, return 0; } +static void adm1026_print_gpio(struct i2c_client *client) +{ + struct adm1026_data *data = i2c_get_clientdata(client); + int i; + + dev_dbg(&client->dev, "GPIO config is:\n"); + for (i = 0; i <= 7; ++i) { + if (data->config2 & (1 << i)) { + dev_dbg(&client->dev, "\t%sGP%s%d\n", + data->gpio_config[i] & 0x02 ? "" : "!", + data->gpio_config[i] & 0x01 ? "OUT" : "IN", + i); + } else { + dev_dbg(&client->dev, "\tFAN%d\n", i); + } + } + for (i = 8; i <= 15; ++i) { + dev_dbg(&client->dev, "\t%sGP%s%d\n", + data->gpio_config[i] & 0x02 ? "" : "!", + data->gpio_config[i] & 0x01 ? "OUT" : "IN", + i); + } + if (data->config3 & CFG3_GPIO16_ENABLE) { + dev_dbg(&client->dev, "\t%sGP%s16\n", + data->gpio_config[16] & 0x02 ? "" : "!", + data->gpio_config[16] & 0x01 ? "OUT" : "IN"); + } else { + /* GPIO16 is THERM */ + dev_dbg(&client->dev, "\tTHERM\n"); + } +} + +static void adm1026_fixup_gpio(struct i2c_client *client) +{ + struct adm1026_data *data = i2c_get_clientdata(client); + int i; + int value; + + /* Make the changes requested. */ + /* + * We may need to unlock/stop monitoring or soft-reset the + * chip before we can make changes. This hasn't been + * tested much. FIXME + */ + + /* Make outputs */ + for (i = 0; i <= 16; ++i) { + if (gpio_output[i] >= 0 && gpio_output[i] <= 16) + data->gpio_config[gpio_output[i]] |= 0x01; + /* if GPIO0-7 is output, it isn't a FAN tach */ + if (gpio_output[i] >= 0 && gpio_output[i] <= 7) + data->config2 |= 1 << gpio_output[i]; + } + + /* Input overrides output */ + for (i = 0; i <= 16; ++i) { + if (gpio_input[i] >= 0 && gpio_input[i] <= 16) + data->gpio_config[gpio_input[i]] &= ~0x01; + /* if GPIO0-7 is input, it isn't a FAN tach */ + if (gpio_input[i] >= 0 && gpio_input[i] <= 7) + data->config2 |= 1 << gpio_input[i]; + } + + /* Inverted */ + for (i = 0; i <= 16; ++i) { + if (gpio_inverted[i] >= 0 && gpio_inverted[i] <= 16) + data->gpio_config[gpio_inverted[i]] &= ~0x02; + } + + /* Normal overrides inverted */ + for (i = 0; i <= 16; ++i) { + if (gpio_normal[i] >= 0 && gpio_normal[i] <= 16) + data->gpio_config[gpio_normal[i]] |= 0x02; + } + + /* Fan overrides input and output */ + for (i = 0; i <= 7; ++i) { + if (gpio_fan[i] >= 0 && gpio_fan[i] <= 7) + data->config2 &= ~(1 << gpio_fan[i]); + } + + /* Write new configs to registers */ + adm1026_write_value(client, ADM1026_REG_CONFIG2, data->config2); + data->config3 = (data->config3 & 0x3f) + | ((data->gpio_config[16] & 0x03) << 6); + adm1026_write_value(client, ADM1026_REG_CONFIG3, data->config3); + for (i = 15, value = 0; i >= 0; --i) { + value <<= 2; + value |= data->gpio_config[i] & 0x03; + if ((i & 0x03) == 0) { + adm1026_write_value(client, + ADM1026_REG_GPIO_CFG_0_3 + i/4, + value); + value = 0; + } + } + + /* Print the new config */ + adm1026_print_gpio(client); +} + +static void adm1026_init_client(struct i2c_client *client) +{ + int value, i; + struct adm1026_data *data = i2c_get_clientdata(client); + + dev_dbg(&client->dev, "Initializing device\n"); + /* Read chip config */ + data->config1 = adm1026_read_value(client, ADM1026_REG_CONFIG1); + data->config2 = adm1026_read_value(client, ADM1026_REG_CONFIG2); + data->config3 = adm1026_read_value(client, ADM1026_REG_CONFIG3); + + /* Inform user of chip config */ + dev_dbg(&client->dev, "ADM1026_REG_CONFIG1 is: 0x%02x\n", + data->config1); + if ((data->config1 & CFG1_MONITOR) == 0) { + dev_dbg(&client->dev, + "Monitoring not currently enabled.\n"); + } + if (data->config1 & CFG1_INT_ENABLE) { + dev_dbg(&client->dev, + "SMBALERT interrupts are enabled.\n"); + } + if (data->config1 & CFG1_AIN8_9) { + dev_dbg(&client->dev, + "in8 and in9 enabled. temp3 disabled.\n"); + } else { + dev_dbg(&client->dev, + "temp3 enabled. in8 and in9 disabled.\n"); + } + if (data->config1 & CFG1_THERM_HOT) { + dev_dbg(&client->dev, + "Automatic THERM, PWM, and temp limits enabled.\n"); + } + + if (data->config3 & CFG3_GPIO16_ENABLE) { + dev_dbg(&client->dev, + "GPIO16 enabled. THERM pin disabled.\n"); + } else { + dev_dbg(&client->dev, + "THERM pin enabled. GPIO16 disabled.\n"); + } + if (data->config3 & CFG3_VREF_250) + dev_dbg(&client->dev, "Vref is 2.50 Volts.\n"); + else + dev_dbg(&client->dev, "Vref is 1.82 Volts.\n"); + /* Read and pick apart the existing GPIO configuration */ + value = 0; + for (i = 0; i <= 15; ++i) { + if ((i & 0x03) == 0) { + value = adm1026_read_value(client, + ADM1026_REG_GPIO_CFG_0_3 + i / 4); + } + data->gpio_config[i] = value & 0x03; + value >>= 2; + } + data->gpio_config[16] = (data->config3 >> 6) & 0x03; + + /* ... and then print it */ + adm1026_print_gpio(client); + + /* + * If the user asks us to reprogram the GPIO config, then + * do it now. + */ + if (gpio_input[0] != -1 || gpio_output[0] != -1 + || gpio_inverted[0] != -1 || gpio_normal[0] != -1 + || gpio_fan[0] != -1) { + adm1026_fixup_gpio(client); + } + + /* + * WE INTENTIONALLY make no changes to the limits, + * offsets, pwms, fans and zones. If they were + * configured, we don't want to mess with them. + * If they weren't, the default is 100% PWM, no + * control and will suffice until 'sensors -s' + * can be run by the user. We DO set the default + * value for pwm1.auto_pwm_min to its maximum + * so that enabling automatic pwm fan control + * without first setting a value for pwm1.auto_pwm_min + * will not result in potentially dangerous fan speed decrease. + */ + data->pwm1.auto_pwm_min = 255; + /* Start monitoring */ + value = adm1026_read_value(client, ADM1026_REG_CONFIG1); + /* Set MONITOR, clear interrupt acknowledge and s/w reset */ + value = (value | CFG1_MONITOR) & (~CFG1_INT_CLEAR & ~CFG1_RESET); + dev_dbg(&client->dev, "Setting CONFIG to: 0x%02x\n", value); + data->config1 = value; + adm1026_write_value(client, ADM1026_REG_CONFIG1, value); + + /* initialize fan_div[] to hardware defaults */ + value = adm1026_read_value(client, ADM1026_REG_FAN_DIV_0_3) | + (adm1026_read_value(client, ADM1026_REG_FAN_DIV_4_7) << 8); + for (i = 0; i <= 7; ++i) { + data->fan_div[i] = DIV_FROM_REG(value & 0x03); + value >>= 2; + } +} + static int adm1026_probe(struct i2c_client *client, const struct i2c_device_id *id) { @@ -1892,6 +1860,24 @@ static int adm1026_remove(struct i2c_client *client) return 0; } +static const struct i2c_device_id adm1026_id[] = { + { "adm1026", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, adm1026_id); + +static struct i2c_driver adm1026_driver = { + .class = I2C_CLASS_HWMON, + .driver = { + .name = "adm1026", + }, + .probe = adm1026_probe, + .remove = adm1026_remove, + .id_table = adm1026_id, + .detect = adm1026_detect, + .address_list = normal_i2c, +}; + module_i2c_driver(adm1026_driver); MODULE_LICENSE("GPL"); -- cgit v1.2.3