From a4d89568735b1bbce01ef282e49a590c5cb09597 Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Thu, 3 Sep 2020 10:00:57 +0200 Subject: drm/vc4: crtc: Remove mode_set_nofb On BCM2711 to avoid stale pixels getting stuck in intermediate FIFOs, the pixelvalve needs to be setup each time there's a mode change or enable / disable sequence. Therefore, we can't really use mode_set_nofb anymore to configure it, but we need to move it to atomic_enable. Signed-off-by: Maxime Ripard Tested-by: Chanwoo Choi Tested-by: Hoegeun Kwon Tested-by: Stefan Wahren Reviewed-by: Dave Stevenson Link: https://patchwork.freedesktop.org/patch/msgid/f86c7a6946f98262f1cf59a461596a796d4bcc5f.1599120059.git-series.maxime@cerno.tech --- drivers/gpu/drm/vc4/vc4_crtc.c | 7 +------ 1 file changed, 1 insertion(+), 6 deletions(-) (limited to 'drivers/gpu/drm/vc4') diff --git a/drivers/gpu/drm/vc4/vc4_crtc.c b/drivers/gpu/drm/vc4/vc4_crtc.c index 284a85b9d7d4..2eda2e6429ec 100644 --- a/drivers/gpu/drm/vc4/vc4_crtc.c +++ b/drivers/gpu/drm/vc4/vc4_crtc.c @@ -376,11 +376,6 @@ static void vc4_crtc_config_pv(struct drm_crtc *crtc) } } -static void vc4_crtc_mode_set_nofb(struct drm_crtc *crtc) -{ - vc4_crtc_config_pv(crtc); -} - static void require_hvs_enabled(struct drm_device *dev) { struct vc4_dev *vc4 = to_vc4_dev(dev); @@ -433,6 +428,7 @@ static void vc4_crtc_atomic_enable(struct drm_crtc *crtc, require_hvs_enabled(dev); vc4_crtc_pixelvalve_reset(crtc); + vc4_crtc_config_pv(crtc); CRTC_WRITE(PV_CONTROL, CRTC_READ(PV_CONTROL) | PV_CONTROL_EN); @@ -791,7 +787,6 @@ static const struct drm_crtc_funcs vc4_crtc_funcs = { }; static const struct drm_crtc_helper_funcs vc4_crtc_helper_funcs = { - .mode_set_nofb = vc4_crtc_mode_set_nofb, .mode_valid = vc4_crtc_mode_valid, .atomic_check = vc4_crtc_atomic_check, .atomic_flush = vc4_hvs_atomic_flush, -- cgit v1.2.3