From c6659785dfb3f8d75f1fe637e4222ff8178f5280 Mon Sep 17 00:00:00 2001 From: Harigovindan P Date: Thu, 6 Feb 2020 14:42:01 +0530 Subject: drm/msm/dsi/pll: call vco set rate explicitly For a given byte clock, if VCO recalc value is exactly same as vco set rate value, vco_set_rate does not get called assuming VCO is already set to required value. But Due to GDSC toggle, VCO values are erased in the HW. To make sure VCO is programmed correctly, we forcefully call set_rate from vco_prepare. Signed-off-by: Harigovindan P Reviewed-by: Jeffrey Hugo Signed-off-by: Rob Clark --- drivers/gpu/drm/msm/dsi/pll/dsi_pll_10nm.c | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'drivers/gpu/drm/msm') diff --git a/drivers/gpu/drm/msm/dsi/pll/dsi_pll_10nm.c b/drivers/gpu/drm/msm/dsi/pll/dsi_pll_10nm.c index 1c894548dd72..6ac04fc303f5 100644 --- a/drivers/gpu/drm/msm/dsi/pll/dsi_pll_10nm.c +++ b/drivers/gpu/drm/msm/dsi/pll/dsi_pll_10nm.c @@ -411,6 +411,12 @@ static int dsi_pll_10nm_vco_prepare(struct clk_hw *hw) if (pll_10nm->slave) dsi_pll_enable_pll_bias(pll_10nm->slave); + rc = dsi_pll_10nm_vco_set_rate(hw,pll_10nm->vco_current_rate, 0); + if (rc) { + pr_err("vco_set_rate failed, rc=%d\n", rc); + return rc; + } + /* Start PLL */ pll_write(pll_10nm->phy_cmn_mmio + REG_DSI_10nm_PHY_CMN_PLL_CNTRL, 0x01); -- cgit v1.2.3