From b3e3893e1253692c3d2b8e8ebd5a26183ed30443 Mon Sep 17 00:00:00 2001 From: Jarod Wilson Date: Thu, 20 Oct 2016 13:55:22 -0400 Subject: net: use core MTU range checking in misc drivers firewire-net: - set min/max_mtu - remove fwnet_change_mtu nes: - set max_mtu - clean up nes_netdev_change_mtu xpnet: - set min/max_mtu - remove xpnet_dev_change_mtu hippi: - set min/max_mtu - remove hippi_change_mtu batman-adv: - set max_mtu - remove batadv_interface_change_mtu - initialization is a little async, not 100% certain that max_mtu is set in the optimal place, don't have hardware to test with rionet: - set min/max_mtu - remove rionet_change_mtu slip: - set min/max_mtu - streamline sl_change_mtu um/net_kern: - remove pointless ndo_change_mtu hsi/clients/ssi_protocol: - use core MTU range checking - remove now redundant ssip_pn_set_mtu ipoib: - set a default max MTU value - Note: ipoib's actual max MTU can vary, depending on if the device is in connected mode or not, so we'll just set the max_mtu value to the max possible, and let the ndo_change_mtu function continue to validate any new MTU change requests with checks for CM or not. Note that ipoib has no min_mtu set, and thus, the network core's mtu > 0 check is the only lower bounds here. mptlan: - use net core MTU range checking - remove now redundant mpt_lan_change_mtu fddi: - min_mtu = 21, max_mtu = 4470 - remove now redundant fddi_change_mtu (including export) fjes: - min_mtu = 8192, max_mtu = 65536 - The max_mtu value is actually one over IP_MAX_MTU here, but the idea is to get past the core net MTU range checks so fjes_change_mtu can validate a new MTU against what it supports (see fjes_support_mtu in fjes_hw.c) hsr: - min_mtu = 0 (calls ether_setup, max_mtu is 1500) f_phonet: - min_mtu = 6, max_mtu = 65541 u_ether: - min_mtu = 14, max_mtu = 15412 phonet/pep-gprs: - min_mtu = 576, max_mtu = 65530 - remove redundant gprs_set_mtu CC: netdev@vger.kernel.org CC: linux-rdma@vger.kernel.org CC: Stefan Richter CC: Faisal Latif CC: linux-rdma@vger.kernel.org CC: Cliff Whickman CC: Robin Holt CC: Jes Sorensen CC: Marek Lindner CC: Simon Wunderlich CC: Antonio Quartulli CC: Sathya Prakash CC: Chaitra P B CC: Suganath Prabu Subramani CC: MPT-FusionLinux.pdl@broadcom.com CC: Sebastian Reichel CC: Felipe Balbi CC: Arvid Brodin CC: Remi Denis-Courmont Signed-off-by: Jarod Wilson Signed-off-by: David S. Miller --- drivers/firewire/net.c | 18 ++++-------------- 1 file changed, 4 insertions(+), 14 deletions(-) (limited to 'drivers/firewire/net.c') diff --git a/drivers/firewire/net.c b/drivers/firewire/net.c index 309311b1faae..8430222151fc 100644 --- a/drivers/firewire/net.c +++ b/drivers/firewire/net.c @@ -1349,15 +1349,6 @@ static netdev_tx_t fwnet_tx(struct sk_buff *skb, struct net_device *net) return NETDEV_TX_OK; } -static int fwnet_change_mtu(struct net_device *net, int new_mtu) -{ - if (new_mtu < 68) - return -EINVAL; - - net->mtu = new_mtu; - return 0; -} - static const struct ethtool_ops fwnet_ethtool_ops = { .get_link = ethtool_op_get_link, }; @@ -1366,7 +1357,6 @@ static const struct net_device_ops fwnet_netdev_ops = { .ndo_open = fwnet_open, .ndo_stop = fwnet_stop, .ndo_start_xmit = fwnet_tx, - .ndo_change_mtu = fwnet_change_mtu, }; static void fwnet_init_dev(struct net_device *net) @@ -1435,7 +1425,6 @@ static int fwnet_probe(struct fw_unit *unit, struct net_device *net; bool allocated_netdev = false; struct fwnet_device *dev; - unsigned max_mtu; int ret; union fwnet_hwaddr *ha; @@ -1478,9 +1467,10 @@ static int fwnet_probe(struct fw_unit *unit, * Use the RFC 2734 default 1500 octets or the maximum payload * as initial MTU */ - max_mtu = (1 << (card->max_receive + 1)) - - sizeof(struct rfc2734_header) - IEEE1394_GASP_HDR_SIZE; - net->mtu = min(1500U, max_mtu); + net->max_mtu = (1 << (card->max_receive + 1)) + - sizeof(struct rfc2734_header) - IEEE1394_GASP_HDR_SIZE; + net->mtu = min(1500U, net->max_mtu); + net->min_mtu = ETH_MIN_MTU; /* Set our hardware address while we're at it */ ha = (union fwnet_hwaddr *)net->dev_addr; -- cgit v1.2.3