From 0d5ff566779f894ca9937231a181eb31e4adff0e Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Thu, 1 Feb 2007 15:06:36 +0900 Subject: libata: convert to iomap Convert libata core layer and LLDs to use iomap. * managed iomap is used. Pointer to pcim_iomap_table() is cached at host->iomap and used through out LLDs. This basically replaces host->mmio_base. * if possible, pcim_iomap_regions() is used Most iomap operation conversions are taken from Jeff Garzik 's iomap branch. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/ata/pata_it821x.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers/ata/pata_it821x.c') diff --git a/drivers/ata/pata_it821x.c b/drivers/ata/pata_it821x.c index f23365b92c0f..e8a6e7d73b72 100644 --- a/drivers/ata/pata_it821x.c +++ b/drivers/ata/pata_it821x.c @@ -492,7 +492,7 @@ static int it821x_smart_set_mode(struct ata_port *ap, struct ata_device **unused /* Bits 5 and 6 indicate if DMA is active on master/slave */ /* It is possible that BMDMA isn't allocated */ if (ap->ioaddr.bmdma_addr) - dma_enabled = inb(ap->ioaddr.bmdma_addr + ATA_DMA_CMD); + dma_enabled = ioread8(ap->ioaddr.bmdma_addr + ATA_DMA_CMD); for (i = 0; i < ATA_MAX_DEVICES; i++) { struct ata_device *dev = &ap->device[i]; @@ -674,7 +674,7 @@ static struct ata_port_operations it821x_smart_port_ops = { .qc_prep = ata_qc_prep, .qc_issue = it821x_smart_qc_issue_prot, - .data_xfer = ata_pio_data_xfer, + .data_xfer = ata_data_xfer, .irq_handler = ata_interrupt, .irq_clear = ata_bmdma_irq_clear, @@ -708,7 +708,7 @@ static struct ata_port_operations it821x_passthru_port_ops = { .qc_prep = ata_qc_prep, .qc_issue = it821x_passthru_qc_issue_prot, - .data_xfer = ata_pio_data_xfer, + .data_xfer = ata_data_xfer, .irq_clear = ata_bmdma_irq_clear, .irq_handler = ata_interrupt, -- cgit v1.2.3