From 204ebc0aa30a7115f300cac39fbb7eeb66524881 Mon Sep 17 00:00:00 2001 From: Mika Westerberg Date: Mon, 20 May 2013 15:41:45 +0000 Subject: ACPI / resources: call acpi_get_override_irq() only for legacy IRQ resources acpi_get_override_irq() was added because there was a problem with buggy BIOSes passing wrong IRQ() resource for the RTC IRQ. The commit that added the workaround was 61fd47e0c8476 (ACPI: fix two IRQ8 issues in IOAPIC mode). With ACPI 5 enumerated devices there are typically one or more extended IRQ resources per device (and these IRQs can be shared). However, the acpi_get_override_irq() workaround forces all IRQs in range 0 - 15 (the legacy ISA IRQs) to be edge triggered, active high as can be seen from the dmesg below: ACPI: IRQ 6 override to edge, high ACPI: IRQ 7 override to edge, high ACPI: IRQ 7 override to edge, high ACPI: IRQ 13 override to edge, high Also /proc/interrupts for the I2C controllers (INT33C2 and INT33C3) shows the same thing: 7: 4 0 0 0 IO-APIC-edge INT33C2:00, INT33C3:00 The _CSR method for INT33C2 (and INT33C3) device returns following resource: Interrupt (ResourceConsumer, Level, ActiveLow, Shared,,, ) { 0x00000007, } which states that this is supposed to be level triggered, active low, shared IRQ instead. Fix this by making sure that acpi_get_override_irq() gets only called when we are dealing with legacy IRQ() or IRQNoFlags() descriptors. While we are there, correct pr_warning() to print the right triggering value. This change turns out to be necessary to make DMA work correctly on systems based on the Intel Lynxpoint PCH (Platform Controller Hub). [rjw: Changelog] Signed-off-by: Mika Westerberg Cc: 3.9+ Signed-off-by: Rafael J. Wysocki --- drivers/acpi/resource.c | 16 +++++++++++----- 1 file changed, 11 insertions(+), 5 deletions(-) (limited to 'drivers/acpi/resource.c') diff --git a/drivers/acpi/resource.c b/drivers/acpi/resource.c index a3868f6c222a..3322b47ab7ca 100644 --- a/drivers/acpi/resource.c +++ b/drivers/acpi/resource.c @@ -304,7 +304,8 @@ static void acpi_dev_irqresource_disabled(struct resource *res, u32 gsi) } static void acpi_dev_get_irqresource(struct resource *res, u32 gsi, - u8 triggering, u8 polarity, u8 shareable) + u8 triggering, u8 polarity, u8 shareable, + bool legacy) { int irq, p, t; @@ -317,14 +318,19 @@ static void acpi_dev_get_irqresource(struct resource *res, u32 gsi, * In IO-APIC mode, use overrided attribute. Two reasons: * 1. BIOS bug in DSDT * 2. BIOS uses IO-APIC mode Interrupt Source Override + * + * We do this only if we are dealing with IRQ() or IRQNoFlags() + * resource (the legacy ISA resources). With modern ACPI 5 devices + * using extended IRQ descriptors we take the IRQ configuration + * from _CRS directly. */ - if (!acpi_get_override_irq(gsi, &t, &p)) { + if (legacy && !acpi_get_override_irq(gsi, &t, &p)) { u8 trig = t ? ACPI_LEVEL_SENSITIVE : ACPI_EDGE_SENSITIVE; u8 pol = p ? ACPI_ACTIVE_LOW : ACPI_ACTIVE_HIGH; if (triggering != trig || polarity != pol) { pr_warning("ACPI: IRQ %d override to %s, %s\n", gsi, - t ? "edge" : "level", p ? "low" : "high"); + t ? "level" : "edge", p ? "low" : "high"); triggering = trig; polarity = pol; } @@ -373,7 +379,7 @@ bool acpi_dev_resource_interrupt(struct acpi_resource *ares, int index, } acpi_dev_get_irqresource(res, irq->interrupts[index], irq->triggering, irq->polarity, - irq->sharable); + irq->sharable, true); break; case ACPI_RESOURCE_TYPE_EXTENDED_IRQ: ext_irq = &ares->data.extended_irq; @@ -383,7 +389,7 @@ bool acpi_dev_resource_interrupt(struct acpi_resource *ares, int index, } acpi_dev_get_irqresource(res, ext_irq->interrupts[index], ext_irq->triggering, ext_irq->polarity, - ext_irq->sharable); + ext_irq->sharable, false); break; default: return false; -- cgit v1.2.3