From f654c0fefa8c16d439185b61442710fadc167e78 Mon Sep 17 00:00:00 2001 From: Lin Ming Date: Thu, 12 Jan 2012 13:10:32 +0800 Subject: ACPICA: Add support for region address conflict checking Allows drivers to determine if any memory or I/O addresses will conflict with addresses used by ACPI operation regions. Introduces a new interface, acpi_check_address_range. http://marc.info/?t=132251388700002&r=1&w=2 Reported-and-tested-by: Luca Tettamanti Signed-off-by: Lin Ming Signed-off-by: Bob Moore Signed-off-by: Len Brown --- drivers/acpi/acpica/utaddress.c | 294 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 294 insertions(+) create mode 100644 drivers/acpi/acpica/utaddress.c (limited to 'drivers/acpi/acpica/utaddress.c') diff --git a/drivers/acpi/acpica/utaddress.c b/drivers/acpi/acpica/utaddress.c new file mode 100644 index 000000000000..67932aebe6dd --- /dev/null +++ b/drivers/acpi/acpica/utaddress.c @@ -0,0 +1,294 @@ +/****************************************************************************** + * + * Module Name: utaddress - op_region address range check + * + *****************************************************************************/ + +/* + * Copyright (C) 2000 - 2012, Intel Corp. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions, and the following disclaimer, + * without modification. + * 2. Redistributions in binary form must reproduce at minimum a disclaimer + * substantially similar to the "NO WARRANTY" disclaimer below + * ("Disclaimer") and any redistribution must be conditioned upon + * including a substantially similar Disclaimer requirement for further + * binary redistribution. + * 3. Neither the names of the above-listed copyright holders nor the names + * of any contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * Alternatively, this software may be distributed under the terms of the + * GNU General Public License ("GPL") version 2 as published by the Free + * Software Foundation. + * + * NO WARRANTY + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING + * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGES. + */ + +#include +#include "accommon.h" +#include "acnamesp.h" + +#define _COMPONENT ACPI_UTILITIES +ACPI_MODULE_NAME("utaddress") + +/******************************************************************************* + * + * FUNCTION: acpi_ut_add_address_range + * + * PARAMETERS: space_id - Address space ID + * Address - op_region start address + * Length - op_region length + * region_node - op_region namespace node + * + * RETURN: Status + * + * DESCRIPTION: Add the Operation Region address range to the global list. + * The only supported Space IDs are Memory and I/O. Called when + * the op_region address/length operands are fully evaluated. + * + * MUTEX: Locks the namespace + * + * NOTE: Because this interface is only called when an op_region argument + * list is evaluated, there cannot be any duplicate region_nodes. + * Duplicate Address/Length values are allowed, however, so that multiple + * address conflicts can be detected. + * + ******************************************************************************/ +acpi_status +acpi_ut_add_address_range(acpi_adr_space_type space_id, + acpi_physical_address address, + u32 length, struct acpi_namespace_node *region_node) +{ + struct acpi_address_range *range_info; + acpi_status status; + + ACPI_FUNCTION_TRACE(ut_add_address_range); + + if ((space_id != ACPI_ADR_SPACE_SYSTEM_MEMORY) && + (space_id != ACPI_ADR_SPACE_SYSTEM_IO)) { + return_ACPI_STATUS(AE_OK); + } + + /* Allocate/init a new info block, add it to the appropriate list */ + + range_info = ACPI_ALLOCATE(sizeof(struct acpi_address_range)); + if (!range_info) { + return_ACPI_STATUS(AE_NO_MEMORY); + } + + range_info->start_address = address; + range_info->end_address = (address + length - 1); + range_info->region_node = region_node; + + status = acpi_ut_acquire_mutex(ACPI_MTX_NAMESPACE); + if (ACPI_FAILURE(status)) { + ACPI_FREE(range_info); + return_ACPI_STATUS(status); + } + + range_info->next = acpi_gbl_address_range_list[space_id]; + acpi_gbl_address_range_list[space_id] = range_info; + + ACPI_DEBUG_PRINT((ACPI_DB_NAMES, + "\nAdded [%4.4s] address range: 0x%p-0x%p\n", + acpi_ut_get_node_name(range_info->region_node), + ACPI_CAST_PTR(void, address), + ACPI_CAST_PTR(void, range_info->end_address))); + + (void)acpi_ut_release_mutex(ACPI_MTX_NAMESPACE); + return_ACPI_STATUS(AE_OK); +} + +/******************************************************************************* + * + * FUNCTION: acpi_ut_remove_address_range + * + * PARAMETERS: space_id - Address space ID + * region_node - op_region namespace node + * + * RETURN: None + * + * DESCRIPTION: Remove the Operation Region from the global list. The only + * supported Space IDs are Memory and I/O. Called when an + * op_region is deleted. + * + * MUTEX: Assumes the namespace is locked + * + ******************************************************************************/ + +void +acpi_ut_remove_address_range(acpi_adr_space_type space_id, + struct acpi_namespace_node *region_node) +{ + struct acpi_address_range *range_info; + struct acpi_address_range *prev; + + ACPI_FUNCTION_TRACE(ut_remove_address_range); + + if ((space_id != ACPI_ADR_SPACE_SYSTEM_MEMORY) && + (space_id != ACPI_ADR_SPACE_SYSTEM_IO)) { + return_VOID; + } + + /* Get the appropriate list head and check the list */ + + range_info = prev = acpi_gbl_address_range_list[space_id]; + while (range_info) { + if (range_info->region_node == region_node) { + if (range_info == prev) { /* Found at list head */ + acpi_gbl_address_range_list[space_id] = + range_info->next; + } else { + prev->next = range_info->next; + } + + ACPI_DEBUG_PRINT((ACPI_DB_NAMES, + "\nRemoved [%4.4s] address range: 0x%p-0x%p\n", + acpi_ut_get_node_name(range_info-> + region_node), + ACPI_CAST_PTR(void, + range_info-> + start_address), + ACPI_CAST_PTR(void, + range_info-> + end_address))); + + ACPI_FREE(range_info); + return_VOID; + } + + prev = range_info; + range_info = range_info->next; + } + + return_VOID; +} + +/******************************************************************************* + * + * FUNCTION: acpi_ut_check_address_range + * + * PARAMETERS: space_id - Address space ID + * Address - Start address + * Length - Length of address range + * Warn - TRUE if warning on overlap desired + * + * RETURN: Count of the number of conflicts detected. Zero is always + * returned for Space IDs other than Memory or I/O. + * + * DESCRIPTION: Check if the input address range overlaps any of the + * ASL operation region address ranges. The only supported + * Space IDs are Memory and I/O. + * + * MUTEX: Assumes the namespace is locked. + * + ******************************************************************************/ + +u32 +acpi_ut_check_address_range(acpi_adr_space_type space_id, + acpi_physical_address address, u32 length, u8 warn) +{ + struct acpi_address_range *range_info; + acpi_physical_address end_address; + char *pathname; + u32 overlap_count = 0; + + ACPI_FUNCTION_TRACE(ut_check_address_range); + + if ((space_id != ACPI_ADR_SPACE_SYSTEM_MEMORY) && + (space_id != ACPI_ADR_SPACE_SYSTEM_IO)) { + return_UINT32(0); + } + + range_info = acpi_gbl_address_range_list[space_id]; + end_address = address + length - 1; + + /* Check entire list for all possible conflicts */ + + while (range_info) { + /* + * Check if the requested Address/Length overlaps this address_range. + * Four cases to consider: + * + * 1) Input address/length is contained completely in the address range + * 2) Input address/length overlaps range at the range start + * 3) Input address/length overlaps range at the range end + * 4) Input address/length completely encompasses the range + */ + if ((address <= range_info->end_address) && + (end_address >= range_info->start_address)) { + + /* Found an address range overlap */ + + overlap_count++; + if (warn) { /* Optional warning message */ + pathname = + acpi_ns_get_external_pathname(range_info-> + region_node); + + ACPI_WARNING((AE_INFO, + "0x%p-0x%p %s conflicts with Region %s %d", + ACPI_CAST_PTR(void, address), + ACPI_CAST_PTR(void, end_address), + acpi_ut_get_region_name(space_id), + pathname, overlap_count)); + ACPI_FREE(pathname); + } + } + + range_info = range_info->next; + } + + return_UINT32(overlap_count); +} + +/******************************************************************************* + * + * FUNCTION: acpi_ut_delete_address_lists + * + * PARAMETERS: None + * + * RETURN: None + * + * DESCRIPTION: Delete all global address range lists (called during + * subsystem shutdown). + * + ******************************************************************************/ + +void acpi_ut_delete_address_lists(void) +{ + struct acpi_address_range *next; + struct acpi_address_range *range_info; + int i; + + /* Delete all elements in all address range lists */ + + for (i = 0; i < ACPI_ADDRESS_RANGE_MAX; i++) { + next = acpi_gbl_address_range_list[i]; + + while (next) { + range_info = next; + next = range_info->next; + ACPI_FREE(range_info); + } + + acpi_gbl_address_range_list[i] = NULL; + } +} -- cgit v1.2.3