From b7f865ede20c87073216f77fe97f6fc56666e3da Mon Sep 17 00:00:00 2001 From: Icenowy Zheng Date: Tue, 25 Oct 2016 01:08:31 +0800 Subject: ARM: dts: sun8i: fix the pinmux for UART1 When the patch is applied, the allwinner,driver and allwinner,pull properties are removed. Although they're described to be optional in the devicetree binding, without them, the pinmux cannot be initialized, and the uart cannot be used. Add them back to fix the problem, and makes the bluetooth on iNet D978 Rev2 board work. Fixes: 82eec384249f (ARM: dts: sun8i: add pinmux for UART1 at PG) Signed-off-by: Icenowy Zheng Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun8i-a23-a33.dtsi | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/sun8i-a23-a33.dtsi b/arch/arm/boot/dts/sun8i-a23-a33.dtsi index 48fc24f36fcb..300a1bd5a6ec 100644 --- a/arch/arm/boot/dts/sun8i-a23-a33.dtsi +++ b/arch/arm/boot/dts/sun8i-a23-a33.dtsi @@ -282,11 +282,15 @@ uart1_pins_a: uart1@0 { allwinner,pins = "PG6", "PG7"; allwinner,function = "uart1"; + allwinner,drive = ; + allwinner,pull = ; }; uart1_pins_cts_rts_a: uart1-cts-rts@0 { allwinner,pins = "PG8", "PG9"; allwinner,function = "uart1"; + allwinner,drive = ; + allwinner,pull = ; }; mmc0_pins_a: mmc0@0 { -- cgit v1.2.3 From e3c9d9d6ebfeeeee29c6240e1b5978d40d31d21f Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Thu, 27 Oct 2016 13:06:44 -0200 Subject: ARM: dts: imx53-qsb: Fix regulator constraints Since commit fa93fd4ecc9c ("regulator: core: Ensure we are at least in bounds for our constraints") the imx53-qsb board populated with a Dialog DA9053 PMIC fails to boot: LDO3: Bringing 3300000uV into 1800000-1800000uV The LDO3 voltage constraints passed in the device tree do not match the valid range according to the datasheet, so fix this accordingly to allow the board booting again. While at it, fix the other voltage constraints as well. Cc: # 4.7.x Signed-off-by: Fabio Estevam Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx53-qsb.dts | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/imx53-qsb.dts b/arch/arm/boot/dts/imx53-qsb.dts index dec4b073ceb1..379939699164 100644 --- a/arch/arm/boot/dts/imx53-qsb.dts +++ b/arch/arm/boot/dts/imx53-qsb.dts @@ -64,8 +64,8 @@ }; ldo3_reg: ldo3 { - regulator-min-microvolt = <600000>; - regulator-max-microvolt = <1800000>; + regulator-min-microvolt = <1725000>; + regulator-max-microvolt = <3300000>; regulator-always-on; }; @@ -76,8 +76,8 @@ }; ldo5_reg: ldo5 { - regulator-min-microvolt = <1725000>; - regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3600000>; regulator-always-on; }; @@ -100,14 +100,14 @@ }; ldo9_reg: ldo9 { - regulator-min-microvolt = <1200000>; + regulator-min-microvolt = <1250000>; regulator-max-microvolt = <3600000>; regulator-always-on; }; ldo10_reg: ldo10 { - regulator-min-microvolt = <1250000>; - regulator-max-microvolt = <3650000>; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3600000>; regulator-always-on; }; }; -- cgit v1.2.3 From 85566ca6b6d7e131837cd197a441d98e83146fae Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Mon, 7 Nov 2016 14:52:39 -0700 Subject: ARM: OMAP3: Fix formatting of features printed With the printk cleanups merged into v4.9-rc1, we now get the omap revision printed on multiple lines. Let's fix that and also remove the extra empty space at the end of the features. And let's update things to use scnprintf as suggested by Ivaylo Dimitrov . Reported-by: Adam Ford Cc: Ivaylo Dimitrov Reviewed-by: Sebastian Reichel Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/id.c | 16 +++++++++++----- 1 file changed, 11 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c index 2abd53ae3e7a..cc6d9fa60924 100644 --- a/arch/arm/mach-omap2/id.c +++ b/arch/arm/mach-omap2/id.c @@ -205,11 +205,15 @@ void __init omap2xxx_check_revision(void) #define OMAP3_SHOW_FEATURE(feat) \ if (omap3_has_ ##feat()) \ - printk(#feat" "); + n += scnprintf(buf + n, sizeof(buf) - n, #feat " "); static void __init omap3_cpuinfo(void) { const char *cpu_name; + char buf[64]; + int n = 0; + + memset(buf, 0, sizeof(buf)); /* * OMAP3430 and OMAP3530 are assumed to be same. @@ -241,10 +245,10 @@ static void __init omap3_cpuinfo(void) cpu_name = "OMAP3503"; } - sprintf(soc_name, "%s", cpu_name); + scnprintf(soc_name, sizeof(soc_name), "%s", cpu_name); /* Print verbose information */ - pr_info("%s %s (", soc_name, soc_rev); + n += scnprintf(buf, sizeof(buf) - n, "%s %s (", soc_name, soc_rev); OMAP3_SHOW_FEATURE(l2cache); OMAP3_SHOW_FEATURE(iva); @@ -252,8 +256,10 @@ static void __init omap3_cpuinfo(void) OMAP3_SHOW_FEATURE(neon); OMAP3_SHOW_FEATURE(isp); OMAP3_SHOW_FEATURE(192mhz_clk); - - printk(")\n"); + if (*(buf + n - 1) == ' ') + n--; + n += scnprintf(buf + n, sizeof(buf) - n, ")\n"); + pr_info("%s", buf); } #define OMAP3_CHECK_FEATURE(status,feat) \ -- cgit v1.2.3 From 72bb40b8b7620f1390c84c10309a40e886bf449e Mon Sep 17 00:00:00 2001 From: Dave Gerlach Date: Wed, 19 Oct 2016 15:44:12 -0500 Subject: ARM: AM43XX: Select OMAP_INTERCONNECT in Kconfig AM437x makes use of the omap_l3_noc driver so explicitly select OMAP_INTERCONNECT in the Kconfig for SOC_AM43XX to ensure it gets enabled for AM43XX only builds. Signed-off-by: Dave Gerlach Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/Kconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index a9afeebd59f2..0465338183c7 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -71,6 +71,7 @@ config SOC_AM43XX select HAVE_ARM_TWD select ARM_ERRATA_754322 select ARM_ERRATA_775420 + select OMAP_INTERCONNECT config SOC_DRA7XX bool "TI DRA7XX" -- cgit v1.2.3 From 271a3024db1f32ca34f504178fade6ef95cd6c9b Mon Sep 17 00:00:00 2001 From: Adam Ford Date: Fri, 21 Oct 2016 09:12:31 -0500 Subject: ARM: dts: omap3: Fix memory node in Torpedo board Commit ("766a1fe78fc3 ARM: omap3: Add missing memory node") added the memory node, but the patch didn't have the correct starting address. This patch fixes the correct starting address. Signed-off-by: Adam Ford Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/logicpd-torpedo-som.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/logicpd-torpedo-som.dtsi b/arch/arm/boot/dts/logicpd-torpedo-som.dtsi index 731ec37aed5b..8f9a69ca818c 100644 --- a/arch/arm/boot/dts/logicpd-torpedo-som.dtsi +++ b/arch/arm/boot/dts/logicpd-torpedo-som.dtsi @@ -13,9 +13,9 @@ }; }; - memory@0 { + memory@80000000 { device_type = "memory"; - reg = <0 0>; + reg = <0x80000000 0>; }; leds { -- cgit v1.2.3 From 4ae46efcff19445afbf49fe7038de6020f37fefe Mon Sep 17 00:00:00 2001 From: Colin Ian King Date: Mon, 24 Oct 2016 12:00:21 +0100 Subject: ARM: OMAP2+: PRM: initialize en_uart4_mask and grpsel_uart4_mask In the case where has_uart4 is false, en_uart4_mask and grpsel_uart4_mask are not initialized and so any garbage value is being logically or'd into the write of PM_WKEN and OMAP3430_PM_MPUGRPSEL. Fix this by initializing these masks to zero. Signed-off-by: Colin Ian King Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/prm3xxx.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-omap2/prm3xxx.c b/arch/arm/mach-omap2/prm3xxx.c index 62680aad2126..718981bb80cd 100644 --- a/arch/arm/mach-omap2/prm3xxx.c +++ b/arch/arm/mach-omap2/prm3xxx.c @@ -319,6 +319,9 @@ void __init omap3_prm_init_pm(bool has_uart4, bool has_iva) if (has_uart4) { en_uart4_mask = OMAP3630_EN_UART4_MASK; grpsel_uart4_mask = OMAP3630_GRPSEL_UART4_MASK; + } else { + en_uart4_mask = 0; + grpsel_uart4_mask = 0; } /* Enable wakeups in PER */ -- cgit v1.2.3 From 0ab11d8ea46fd6faf67df4461c795091429a1496 Mon Sep 17 00:00:00 2001 From: Nicolae Rosia Date: Tue, 1 Nov 2016 11:49:25 +0200 Subject: ARM: OMAP2+: avoid NULL pointer dereference For OMAP4, volt_data is set in omap44xx_voltagedomains_init. If the SoC is neither OMAP443X or OMAP446X, we end up with a NULL in volt_data which causes a kernel oops. This is the case when booting OMAP4470. Signed-off-by: Nicolae Rosia Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/voltage.c | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-omap2/voltage.c b/arch/arm/mach-omap2/voltage.c index cba8cada8c81..cd15dbd62671 100644 --- a/arch/arm/mach-omap2/voltage.c +++ b/arch/arm/mach-omap2/voltage.c @@ -87,6 +87,12 @@ int voltdm_scale(struct voltagedomain *voltdm, return -ENODATA; } + if (!voltdm->volt_data) { + pr_err("%s: No voltage data defined for vdd_%s\n", + __func__, voltdm->name); + return -ENODATA; + } + /* Adjust voltage to the exact voltage from the OPP table */ for (i = 0; voltdm->volt_data[i].volt_nominal != 0; i++) { if (voltdm->volt_data[i].volt_nominal >= target_volt) { -- cgit v1.2.3 From 725ed2238cdb3807c19e7edcb20fde8d0f91597f Mon Sep 17 00:00:00 2001 From: "H. Nikolaus Schaller" Date: Tue, 25 Oct 2016 19:38:09 +0200 Subject: dts: omap5: board-common: add phandle to reference Palmas gpadc Will be needed for iio based drivers. Signed-off-by: H. Nikolaus Schaller Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/omap5-board-common.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/omap5-board-common.dtsi b/arch/arm/boot/dts/omap5-board-common.dtsi index 6365635fea5c..7cd1c674ceec 100644 --- a/arch/arm/boot/dts/omap5-board-common.dtsi +++ b/arch/arm/boot/dts/omap5-board-common.dtsi @@ -415,7 +415,7 @@ ti,backup-battery-charge-high-current; }; - gpadc { + gpadc: gpadc { compatible = "ti,palmas-gpadc"; interrupts = <18 0 16 0 -- cgit v1.2.3 From 0b68f1beea9ed2b31ff7873d5ed0cfbd087da0eb Mon Sep 17 00:00:00 2001 From: "H. Nikolaus Schaller" Date: Tue, 25 Oct 2016 19:38:10 +0200 Subject: dts: omap5: board-common: enable twl6040 headset jack detection Signed-off-by: H. Nikolaus Schaller Reviewed-by: Peter Ujfalusi Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/omap5-board-common.dtsi | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/omap5-board-common.dtsi b/arch/arm/boot/dts/omap5-board-common.dtsi index 7cd1c674ceec..60a33c4b7b82 100644 --- a/arch/arm/boot/dts/omap5-board-common.dtsi +++ b/arch/arm/boot/dts/omap5-board-common.dtsi @@ -124,6 +124,7 @@ compatible = "ti,abe-twl6040"; ti,model = "omap5-uevm"; + ti,jack-detection; ti,mclk-freq = <19200000>; ti,mcpdm = <&mcpdm>; -- cgit v1.2.3 From 29f0c9edbdd98a977a4c629f411260f6e0356c67 Mon Sep 17 00:00:00 2001 From: Gregory CLEMENT Date: Tue, 8 Nov 2016 17:28:02 +0100 Subject: arm64: dts: marvell: Fix typo in label name on Armada 37xx The label names of the peripheral clocks have a typo. Fix it before it is more widely used. Reported-by: Thomas Petazzoni Signed-off-by: Gregory CLEMENT --- arch/arm64/boot/dts/marvell/armada-37xx.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi index c4762538ec01..e9bd58793464 100644 --- a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi @@ -105,7 +105,7 @@ status = "disabled"; }; - nb_perih_clk: nb-periph-clk@13000{ + nb_periph_clk: nb-periph-clk@13000 { compatible = "marvell,armada-3700-periph-clock-nb"; reg = <0x13000 0x100>; clocks = <&tbg 0>, <&tbg 1>, <&tbg 2>, @@ -113,7 +113,7 @@ #clock-cells = <1>; }; - sb_perih_clk: sb-periph-clk@18000{ + sb_periph_clk: sb-periph-clk@18000 { compatible = "marvell,armada-3700-periph-clock-sb"; reg = <0x18000 0x100>; clocks = <&tbg 0>, <&tbg 1>, <&tbg 2>, -- cgit v1.2.3 From 2ec27be33898effa47fcb2cd45abb552a97fac89 Mon Sep 17 00:00:00 2001 From: Marcin Wojtas Date: Tue, 6 Sep 2016 19:41:12 +0200 Subject: arm64: dts: marvell: fix clocksource for CP110 slave SPI0 I2C and SPI interfaces share common clock trees within the CP110 HW block. It occurred that SPI0 interface has wrong clock assignment in the device tree, which is fixed in this commit to a proper value. Fixes: c749b8d9de32 ("arm64: dts: marvell: add description for the ...") Signed-off-by: Marcin Wojtas Signed-off-by: Gregory CLEMENT --- arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi index 842fb333285c..565b3cb3d7ff 100644 --- a/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi @@ -131,7 +131,7 @@ #address-cells = <0x1>; #size-cells = <0x0>; cell-index = <1>; - clocks = <&cps_syscon0 0 3>; + clocks = <&cps_syscon0 1 21>; status = "disabled"; }; -- cgit v1.2.3 From 8d897006fe9206d64cbe353310be26d7c911e69d Mon Sep 17 00:00:00 2001 From: Marcin Wojtas Date: Tue, 8 Nov 2016 17:31:32 +0100 Subject: arm64: dts: marvell: add unique identifiers for Armada A8k SPI controllers Enabling SPI controllers, which are attached to different busses inside an SoC, may result in overlapping enumeration and cause sysfs registration failure. Example log after enabling two controllers on Armada 8040 SoC with same identifiers: [ 3.740415] sysfs: cannot create duplicate filename '/class/spi_master/spi0' [ 3.747510] ------------[ cut here ]------------ [ 3.752145] WARNING: at fs/sysfs/dir.c:31 [...] [ 4.002299] orion_spi: probe of f4700600.spi failed with error -17 spi-orion driver offers dedicated DT property ('cell-index'), that allow setting unique identifiers. Recently added support for CP110-slave HW block introduced two new SPI controllers' nodes with same ID as ones from CP110-master. This commit fixes the issue by assigning different 'cell-index' values for CP110-slave SPI controllers. Fixes: 4eef78a0091b ("arm64: dts: marvell: add description for the slave CP110 in Armada 8K") Signed-off-by: Marcin Wojtas Acked-by: Thomas Petazzoni Signed-off-by: Gregory CLEMENT --- arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi index 565b3cb3d7ff..6bf9e241179b 100644 --- a/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi @@ -130,7 +130,7 @@ reg = <0x700600 0x50>; #address-cells = <0x1>; #size-cells = <0x0>; - cell-index = <1>; + cell-index = <3>; clocks = <&cps_syscon0 1 21>; status = "disabled"; }; @@ -140,7 +140,7 @@ reg = <0x700680 0x50>; #address-cells = <1>; #size-cells = <0>; - cell-index = <2>; + cell-index = <4>; clocks = <&cps_syscon0 1 21>; status = "disabled"; }; -- cgit v1.2.3 From 80513a2b9f0448eadd10ae81a42229b33ef451fb Mon Sep 17 00:00:00 2001 From: Adam Ford Date: Fri, 21 Oct 2016 08:34:59 -0500 Subject: ARM: omap3: Add missing memory node in SOM-LV The skeleton.dtsi file was removed in ARM64 for different reasons as explained in commit ("3ebee5a2e141 arm64: dts: kill skeleton.dtsi"). commit ("766a1fe78fc3 ARM: omap3: Add missing memory node") had fixes for Torpedo and Overo boards, but this SOM-LV was missed. This should help prevent the DTC warning: "Node /memory has a reg or ranges property, but no unit name" Signed-off-by: Adam Ford Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/logicpd-som-lv.dtsi | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/logicpd-som-lv.dtsi b/arch/arm/boot/dts/logicpd-som-lv.dtsi index 0ff1c2de95bf..26cce4d18405 100644 --- a/arch/arm/boot/dts/logicpd-som-lv.dtsi +++ b/arch/arm/boot/dts/logicpd-som-lv.dtsi @@ -13,6 +13,11 @@ }; }; + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0>; + }; + wl12xx_vmmc: wl12xx_vmmc { compatible = "regulator-fixed"; regulator-name = "vwl1271"; -- cgit v1.2.3 From 1bc2f5fac34535aeb3878ce32a762a221be7a851 Mon Sep 17 00:00:00 2001 From: "H. Nikolaus Schaller" Date: Mon, 14 Nov 2016 12:55:15 +0100 Subject: ARM: dts: omap5: board-common: fix wrong SMPS6 (VDD-DDR3) voltage DDR3L is usually specified as JEDEC standard 1.35V(1.28V~1.45V) & 1.5V(1.425V~1.575V) Therefore setting smps6 regulator to 1.2V is definitively below minimum. It appears that real world chips are more forgiving than data sheets indicate, but let's set the regulator right. Note: a board that uses other voltages (DDR with 1.5V) can overwrite by referencing &smps6_reg. Signed-off-by: H. Nikolaus Schaller Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/omap5-board-common.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/omap5-board-common.dtsi b/arch/arm/boot/dts/omap5-board-common.dtsi index 60a33c4b7b82..4caadb253249 100644 --- a/arch/arm/boot/dts/omap5-board-common.dtsi +++ b/arch/arm/boot/dts/omap5-board-common.dtsi @@ -476,8 +476,8 @@ smps6_reg: smps6 { /* VDD_DDR3 - over VDD_SMPS6 */ regulator-name = "smps6"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; regulator-always-on; regulator-boot-on; }; -- cgit v1.2.3 From 5bf7b6e86f29f064979d7b3e6dd21c5dd1feb855 Mon Sep 17 00:00:00 2001 From: Loic Pallardy Date: Tue, 15 Nov 2016 09:47:00 +0100 Subject: ARM: dts: STiH410-b2260: Fix typo in spi0 chipselect definition Change cs-gpio to cs-gpios. Signed-off-by: Loic Pallardy Acked-by: Patrice Chotard --- arch/arm/boot/dts/stih410-b2260.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/stih410-b2260.dts b/arch/arm/boot/dts/stih410-b2260.dts index ef2ff2f518f6..7fb507fcba7e 100644 --- a/arch/arm/boot/dts/stih410-b2260.dts +++ b/arch/arm/boot/dts/stih410-b2260.dts @@ -74,7 +74,7 @@ /* Low speed expansion connector */ spi0: spi@9844000 { label = "LS-SPI0"; - cs-gpio = <&pio30 3 0>; + cs-gpios = <&pio30 3 0>; status = "okay"; }; -- cgit v1.2.3