From db6a5cef7f474a5bad476a31f4e4c69a69fab8b1 Mon Sep 17 00:00:00 2001 From: Satyam Sharma Date: Tue, 2 Oct 2007 13:39:45 -0700 Subject: [IA64] tree-wide: Misc __cpu{initdata, init, exit} annotations * palinfo.c: palinfo_cpu_notifier is a CPU hotplug notifier_block, and can be marked __cpuinitdata, and the callback function palinfo_cpu_callback() itself can be marked __cpuinit. create_palinfo_proc_entries() is only called from __cpuinit callback or general __init code, therefore a candidate for __cpuinit itself. remove_palinfo_proc_entries() is only called from __cpuinit callback or general __exit code, therefore a candidate for __cpuexit. * salinfo.c: The CPU hotplug notifier_block can be __cpuinitdata. The callback salinfo_cpu_callback() is incorrectly marked __devinit -- it must be __cpuinit instead. * topology.c: cache_sysfs_init() is only called at device_initcall() time so marking it as __cpuinit is wrong and wasteful. It should be unconditionally __init. Also cleanup reference to hotplug notifier callback function from this function and replace with cache_add_dev(), which could also enable us to use other tricks to replace __cpuinit{data} annotations, as recently discussed on this list. cache_shared_cpu_map_setup() is only ever called from __cpuinit-marked functions hence both its definitions (SMP or !SMP) are candidates for __cpuinit itself. Also all_cpu_cache_info can be __cpuinitdata because only referenced from __cpuinit code. Signed-off-by: Satyam Sharma Cc: "Luck, Tony" Signed-off-by: Andrew Morton Signed-off-by: Tony Luck --- arch/ia64/kernel/palinfo.c | 6 +++--- arch/ia64/kernel/salinfo.c | 4 ++-- arch/ia64/kernel/topology.c | 12 ++++++------ 3 files changed, 11 insertions(+), 11 deletions(-) (limited to 'arch') diff --git a/arch/ia64/kernel/palinfo.c b/arch/ia64/kernel/palinfo.c index 85829e27785c..6ef6ffb943a0 100644 --- a/arch/ia64/kernel/palinfo.c +++ b/arch/ia64/kernel/palinfo.c @@ -907,7 +907,7 @@ palinfo_read_entry(char *page, char **start, off_t off, int count, int *eof, voi return len; } -static void +static void __cpuinit create_palinfo_proc_entries(unsigned int cpu) { # define CPUSTR "cpu%d" @@ -968,7 +968,7 @@ remove_palinfo_proc_entries(unsigned int hcpu) } } -static int palinfo_cpu_callback(struct notifier_block *nfb, +static int __cpuinit palinfo_cpu_callback(struct notifier_block *nfb, unsigned long action, void *hcpu) { unsigned int hotcpu = (unsigned long)hcpu; @@ -986,7 +986,7 @@ static int palinfo_cpu_callback(struct notifier_block *nfb, return NOTIFY_OK; } -static struct notifier_block palinfo_cpu_notifier = +static struct notifier_block palinfo_cpu_notifier __cpuinitdata = { .notifier_call = palinfo_cpu_callback, .priority = 0, diff --git a/arch/ia64/kernel/salinfo.c b/arch/ia64/kernel/salinfo.c index 25cd75f50ab1..779c3cca206c 100644 --- a/arch/ia64/kernel/salinfo.c +++ b/arch/ia64/kernel/salinfo.c @@ -574,7 +574,7 @@ static const struct file_operations salinfo_data_fops = { .write = salinfo_log_write, }; -static int __devinit +static int __cpuinit salinfo_cpu_callback(struct notifier_block *nb, unsigned long action, void *hcpu) { unsigned int i, cpu = (unsigned long)hcpu; @@ -615,7 +615,7 @@ salinfo_cpu_callback(struct notifier_block *nb, unsigned long action, void *hcpu return NOTIFY_OK; } -static struct notifier_block salinfo_cpu_notifier = +static struct notifier_block salinfo_cpu_notifier __cpuinitdata = { .notifier_call = salinfo_cpu_callback, .priority = 0, diff --git a/arch/ia64/kernel/topology.c b/arch/ia64/kernel/topology.c index 94ae3c87d828..14261fee5f4d 100644 --- a/arch/ia64/kernel/topology.c +++ b/arch/ia64/kernel/topology.c @@ -118,11 +118,11 @@ struct cpu_cache_info { struct kobject kobj; }; -static struct cpu_cache_info all_cpu_cache_info[NR_CPUS]; +static struct cpu_cache_info all_cpu_cache_info[NR_CPUS] __cpuinitdata; #define LEAF_KOBJECT_PTR(x,y) (&all_cpu_cache_info[x].cache_leaves[y]) #ifdef CONFIG_SMP -static void cache_shared_cpu_map_setup( unsigned int cpu, +static void __cpuinit cache_shared_cpu_map_setup( unsigned int cpu, struct cache_info * this_leaf) { pal_cache_shared_info_t csi; @@ -157,7 +157,7 @@ static void cache_shared_cpu_map_setup( unsigned int cpu, &csi) == PAL_STATUS_SUCCESS); } #else -static void cache_shared_cpu_map_setup(unsigned int cpu, +static void __cpuinit cache_shared_cpu_map_setup(unsigned int cpu, struct cache_info * this_leaf) { cpu_set(cpu, this_leaf->shared_cpu_map); @@ -428,13 +428,13 @@ static struct notifier_block __cpuinitdata cache_cpu_notifier = .notifier_call = cache_cpu_callback }; -static int __cpuinit cache_sysfs_init(void) +static int __init cache_sysfs_init(void) { int i; for_each_online_cpu(i) { - cache_cpu_callback(&cache_cpu_notifier, CPU_ONLINE, - (void *)(long)i); + struct sys_device *sys_dev = get_cpu_sysdev((unsigned int)i); + cache_add_dev(sys_dev); } register_hotcpu_notifier(&cache_cpu_notifier); -- cgit v1.2.3 From 8e75ad8908bd653191b19347ecccb4078cb17b74 Mon Sep 17 00:00:00 2001 From: Satyam Sharma Date: Tue, 2 Oct 2007 13:39:46 -0700 Subject: [IA64] perfmon: Remove exit_pfm_fs() Because it is dead code and not referenced by anybody else (that file cannot be built modular). Signed-off-by: Satyam Sharma Cc: "Luck, Tony" Cc: Stephane Eranian Signed-off-by: Andrew Morton Signed-off-by: Tony Luck --- arch/ia64/kernel/perfmon.c | 7 ------- 1 file changed, 7 deletions(-) (limited to 'arch') diff --git a/arch/ia64/kernel/perfmon.c b/arch/ia64/kernel/perfmon.c index 14b8e5a6222b..f55fa07849c4 100644 --- a/arch/ia64/kernel/perfmon.c +++ b/arch/ia64/kernel/perfmon.c @@ -1538,13 +1538,6 @@ init_pfm_fs(void) return err; } -static void __exit -exit_pfm_fs(void) -{ - unregister_filesystem(&pfm_fs_type); - mntput(pfmfs_mnt); -} - static ssize_t pfm_read(struct file *filp, char __user *buf, size_t size, loff_t *ppos) { -- cgit v1.2.3 From 28eda5b8b434b65e5feb0c58a7477f3f290d72d4 Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Thu, 20 Sep 2007 14:22:03 -0600 Subject: [IA64] add driver for ACPI methods to call native firmware This driver for HPQ5001 devices installs a global ACPI OpRegion handler. AML methods can use this OpRegion to call native firmware entry points. ACPI does not define a mechanism for AML methods to call native firmware interfaces such as PAL or SAL. This OpRegion handler adds such a mechanism. After the handler is installed, an AML method can call native firmware by storing the arguments and firmware entry point to specific offsets in the OpRegion. When AML reads the "return value" offset from the OpRegion, this handler loads up the arguments, makes the firmware call, and returns the result. Signed-off-by: Bjorn Helgaas Signed-off-by: Len Brown Signed-off-by: Tony Luck --- arch/ia64/Kconfig | 10 ++ arch/ia64/hp/common/Makefile | 1 + arch/ia64/hp/common/aml_nfw.c | 236 ++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 247 insertions(+) create mode 100644 arch/ia64/hp/common/aml_nfw.c (limited to 'arch') diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig index 8c39913d1729..2e6310b8eab7 100644 --- a/arch/ia64/Kconfig +++ b/arch/ia64/Kconfig @@ -461,6 +461,16 @@ config IA64_ESI firmware extensions, such as the ability to inject memory-errors for test-purposes. If you're unsure, say N. +config IA64_HP_AML_NFW + bool "Support ACPI AML calls to native firmware" + help + This driver installs a global ACPI Operation Region handler for + region 0xA1. AML methods can use this OpRegion to call arbitrary + native firmware functions. The driver installs the OpRegion + handler if there is an HPQ5001 device or if the user supplies + the "force" module parameter, e.g., with the "aml_nfw.force" + kernel command line option. + source "drivers/sn/Kconfig" config KEXEC diff --git a/arch/ia64/hp/common/Makefile b/arch/ia64/hp/common/Makefile index f61a60057ff7..9e179dd06b85 100644 --- a/arch/ia64/hp/common/Makefile +++ b/arch/ia64/hp/common/Makefile @@ -8,3 +8,4 @@ obj-y := sba_iommu.o obj-$(CONFIG_IA64_HP_ZX1_SWIOTLB) += hwsw_iommu.o obj-$(CONFIG_IA64_GENERIC) += hwsw_iommu.o +obj-$(CONFIG_IA64_HP_AML_NFW) += aml_nfw.o diff --git a/arch/ia64/hp/common/aml_nfw.c b/arch/ia64/hp/common/aml_nfw.c new file mode 100644 index 000000000000..4abd2c79bb1d --- /dev/null +++ b/arch/ia64/hp/common/aml_nfw.c @@ -0,0 +1,236 @@ +/* + * OpRegion handler to allow AML to call native firmware + * + * (c) Copyright 2007 Hewlett-Packard Development Company, L.P. + * Bjorn Helgaas + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This driver implements HP Open Source Review Board proposal 1842, + * which was approved on 9/20/2006. + * + * For technical documentation, see the HP SPPA Firmware EAS, Appendix F. + * + * ACPI does not define a mechanism for AML methods to call native firmware + * interfaces such as PAL or SAL. This OpRegion handler adds such a mechanism. + * After the handler is installed, an AML method can call native firmware by + * storing the arguments and firmware entry point to specific offsets in the + * OpRegion. When AML reads the "return value" offset from the OpRegion, this + * handler loads up the arguments, makes the firmware call, and returns the + * result. + */ + +#include +#include +#include +#include + +MODULE_AUTHOR("Bjorn Helgaas "); +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("ACPI opregion handler for native firmware calls"); + +static int force_register; +module_param_named(force, force_register, bool, 0); +MODULE_PARM_DESC(force, "Install opregion handler even without HPQ5001 device"); + +#define AML_NFW_SPACE 0xA1 + +struct ia64_pdesc { + void *ip; + void *gp; +}; + +/* + * N.B. The layout of this structure is defined in the HP SPPA FW EAS, and + * the member offsets are embedded in AML methods. + */ +struct ia64_nfw_context { + u64 arg[8]; + struct ia64_sal_retval ret; + u64 ip; + u64 gp; + u64 pad[2]; +}; + +static void *virt_map(u64 address) +{ + if (address & (1UL << 63)) + return (void *) (__IA64_UNCACHED_OFFSET | address); + + return __va(address); +} + +static void aml_nfw_execute(struct ia64_nfw_context *c) +{ + struct ia64_pdesc virt_entry; + ia64_sal_handler entry; + + virt_entry.ip = virt_map(c->ip); + virt_entry.gp = virt_map(c->gp); + + entry = (ia64_sal_handler) &virt_entry; + + IA64_FW_CALL(entry, c->ret, + c->arg[0], c->arg[1], c->arg[2], c->arg[3], + c->arg[4], c->arg[5], c->arg[6], c->arg[7]); +} + +static void aml_nfw_read_arg(u8 *offset, u32 bit_width, acpi_integer *value) +{ + switch (bit_width) { + case 8: + *value = *(u8 *)offset; + break; + case 16: + *value = *(u16 *)offset; + break; + case 32: + *value = *(u32 *)offset; + break; + case 64: + *value = *(u64 *)offset; + break; + } +} + +static void aml_nfw_write_arg(u8 *offset, u32 bit_width, acpi_integer *value) +{ + switch (bit_width) { + case 8: + *(u8 *) offset = *value; + break; + case 16: + *(u16 *) offset = *value; + break; + case 32: + *(u32 *) offset = *value; + break; + case 64: + *(u64 *) offset = *value; + break; + } +} + +static acpi_status aml_nfw_handler(u32 function, acpi_physical_address address, + u32 bit_width, acpi_integer *value, void *handler_context, + void *region_context) +{ + struct ia64_nfw_context *context = handler_context; + u8 *offset = (u8 *) context + address; + + if (bit_width != 8 && bit_width != 16 && + bit_width != 32 && bit_width != 64) + return AE_BAD_PARAMETER; + + if (address + (bit_width >> 3) > sizeof(struct ia64_nfw_context)) + return AE_BAD_PARAMETER; + + switch (function) { + case ACPI_READ: + if (address == offsetof(struct ia64_nfw_context, ret)) + aml_nfw_execute(context); + aml_nfw_read_arg(offset, bit_width, value); + break; + case ACPI_WRITE: + aml_nfw_write_arg(offset, bit_width, value); + break; + } + + return AE_OK; +} + +static struct ia64_nfw_context global_context; +static int global_handler_registered; + +static int aml_nfw_add_global_handler(void) +{ + acpi_status status; + + if (global_handler_registered) + return 0; + + status = acpi_install_address_space_handler(ACPI_ROOT_OBJECT, + AML_NFW_SPACE, aml_nfw_handler, NULL, &global_context); + if (ACPI_FAILURE(status)) + return -ENODEV; + + global_handler_registered = 1; + printk(KERN_INFO "Global 0x%02X opregion handler registered\n", + AML_NFW_SPACE); + return 0; +} + +static int aml_nfw_remove_global_handler(void) +{ + acpi_status status; + + if (!global_handler_registered) + return 0; + + status = acpi_remove_address_space_handler(ACPI_ROOT_OBJECT, + AML_NFW_SPACE, aml_nfw_handler); + if (ACPI_FAILURE(status)) + return -ENODEV; + + global_handler_registered = 0; + printk(KERN_INFO "Global 0x%02X opregion handler removed\n", + AML_NFW_SPACE); + return 0; +} + +static int aml_nfw_add(struct acpi_device *device) +{ + /* + * We would normally allocate a new context structure and install + * the address space handler for the specific device we found. + * But the HP-UX implementation shares a single global context + * and always puts the handler at the root, so we'll do the same. + */ + return aml_nfw_add_global_handler(); +} + +static int aml_nfw_remove(struct acpi_device *device, int type) +{ + return aml_nfw_remove_global_handler(); +} + +static const struct acpi_device_id aml_nfw_ids[] = { + {"HPQ5001", 0}, + {"", 0} +}; + +static struct acpi_driver acpi_aml_nfw_driver = { + .name = "native firmware", + .ids = aml_nfw_ids, + .ops = { + .add = aml_nfw_add, + .remove = aml_nfw_remove, + }, +}; + +static int __init aml_nfw_init(void) +{ + int result; + + if (force_register) + aml_nfw_add_global_handler(); + + result = acpi_bus_register_driver(&acpi_aml_nfw_driver); + if (result < 0) { + aml_nfw_remove_global_handler(); + return result; + } + + return 0; +} + +static void __exit aml_nfw_exit(void) +{ + acpi_bus_unregister_driver(&acpi_aml_nfw_driver); + aml_nfw_remove_global_handler(); +} + +module_init(aml_nfw_init); +module_exit(aml_nfw_exit); -- cgit v1.2.3 From 2bc5c282999af41042c2b703bf3a58ca1d7e3ee2 Mon Sep 17 00:00:00 2001 From: Russ Anderson Date: Thu, 20 Sep 2007 13:59:12 -0500 Subject: [IA64] Remove needless delay in MCA rendezvous While testing the MCA recovery code, noticed that some machines would have a five second delay rendezvousing cpus. What was happening is that ia64_wait_for_slaves() would check to see if all the slave CPUs had rendezvoused. If any had not, it would wait 1 millisecond then check again. If any CPUs had still not rendezvoused, it would wait 5 seconds before checking again. On some configs the rendezvous takes more than 1 millisecond, causing the code to wait the full 5 seconds, even though the last CPU rendezvoused after only a few milliseconds. The fix is to check every 1 millisecond to see if all the cpus have rendezvoused. After 5 seconds the code concludes the CPUs will never rendezvous (same as before). The MCA code is, by definition, not performance critical, but a needless delay of 5 seconds is senseless. The 5 seconds also adds up quickly when running the error injection code in a loop. This patch both simplifies the code and removes the needless delay. Signed-off-by: Russ Anderson Signed-off-by: Tony Luck --- arch/ia64/kernel/mca.c | 41 +++++++++++++++++++---------------------- 1 file changed, 19 insertions(+), 22 deletions(-) (limited to 'arch') diff --git a/arch/ia64/kernel/mca.c b/arch/ia64/kernel/mca.c index 63b73f3d4c9f..92367faecbbf 100644 --- a/arch/ia64/kernel/mca.c +++ b/arch/ia64/kernel/mca.c @@ -1135,30 +1135,27 @@ no_mod: static void ia64_wait_for_slaves(int monarch, const char *type) { - int c, wait = 0, missing = 0; - for_each_online_cpu(c) { - if (c == monarch) - continue; - if (ia64_mc_info.imi_rendez_checkin[c] == IA64_MCA_RENDEZ_CHECKIN_NOTDONE) { - udelay(1000); /* short wait first */ - wait = 1; - break; - } - } - if (!wait) - goto all_in; - for_each_online_cpu(c) { - if (c == monarch) - continue; - if (ia64_mc_info.imi_rendez_checkin[c] == IA64_MCA_RENDEZ_CHECKIN_NOTDONE) { - udelay(5*1000000); /* wait 5 seconds for slaves (arbitrary) */ - if (ia64_mc_info.imi_rendez_checkin[c] == IA64_MCA_RENDEZ_CHECKIN_NOTDONE) - missing = 1; - break; + int c, i , wait; + + /* + * wait 5 seconds total for slaves (arbitrary) + */ + for (i = 0; i < 5000; i++) { + wait = 0; + for_each_online_cpu(c) { + if (c == monarch) + continue; + if (ia64_mc_info.imi_rendez_checkin[c] + == IA64_MCA_RENDEZ_CHECKIN_NOTDONE) { + udelay(1000); /* short wait */ + wait = 1; + break; + } } + if (!wait) + goto all_in; } - if (!missing) - goto all_in; + /* * Maybe slave(s) dead. Print buffered messages immediately. */ -- cgit v1.2.3 From e1b1eb011e15190eb859bad0bcae67679bda7d50 Mon Sep 17 00:00:00 2001 From: Russ Anderson Date: Wed, 19 Sep 2007 16:58:31 -0500 Subject: [IA64] Fix race when multiple cpus go through MCA Additional testing uncovered a situation where the MCA recovery code could hang due to a race condition. According to the SAL spec, SAL sends a rendezvous interrupt to all but the first CPU that goes into MCA. This includes other CPUs that go into MCA at the same time. Those other CPUs will go into the linux MCA handler (rather than the slave loop) with the rendezvous interrupt pending. When all the CPUs have completed MCA processing and the last monarch completes, freeing all the CPUs, the CPUs with the pended rendezvous interrupt then go into the ia64_mca_rendez_int_handler(). In ia64_mca_rendez_int_handler() the CPUs get marked as rendezvoused, but then leave the handler (due to no MCA). That leaves the CPUs marked as rendezvoused _before_ the next MCA event. When the next MCA hits, the monarch will mistakenly believe that all the CPUs are rendezvoused when they are not, opening up a window where a CPU can get stuck in the slave loop. This patch avoids leaving CPUs marked as rendezvoused when they are not. Signed-off-by: Russ Anderson Signed-off-by: Tony Luck --- arch/ia64/kernel/mca.c | 47 +++++++++++++++++++++++++---------------------- 1 file changed, 25 insertions(+), 22 deletions(-) (limited to 'arch') diff --git a/arch/ia64/kernel/mca.c b/arch/ia64/kernel/mca.c index 92367faecbbf..cc87025e8f54 100644 --- a/arch/ia64/kernel/mca.c +++ b/arch/ia64/kernel/mca.c @@ -701,8 +701,7 @@ ia64_mca_cmc_vector_enable_keventd(struct work_struct *unused) /* * ia64_mca_wakeup * - * Send an inter-cpu interrupt to wake-up a particular cpu - * and mark that cpu to be out of rendez. + * Send an inter-cpu interrupt to wake-up a particular cpu. * * Inputs : cpuid * Outputs : None @@ -711,14 +710,12 @@ static void ia64_mca_wakeup(int cpu) { platform_send_ipi(cpu, IA64_MCA_WAKEUP_VECTOR, IA64_IPI_DM_INT, 0); - ia64_mc_info.imi_rendez_checkin[cpu] = IA64_MCA_RENDEZ_CHECKIN_NOTDONE; - } /* * ia64_mca_wakeup_all * - * Wakeup all the cpus which have rendez'ed previously. + * Wakeup all the slave cpus which have rendez'ed previously. * * Inputs : None * Outputs : None @@ -741,7 +738,10 @@ ia64_mca_wakeup_all(void) * * This is handler used to put slave processors into spinloop * while the monarch processor does the mca handling and later - * wake each slave up once the monarch is done. + * wake each slave up once the monarch is done. The state + * IA64_MCA_RENDEZ_CHECKIN_DONE indicates the cpu is rendez'ed + * in SAL. The state IA64_MCA_RENDEZ_CHECKIN_NOTDONE indicates + * the cpu has come out of OS rendezvous. * * Inputs : None * Outputs : None @@ -778,6 +778,7 @@ ia64_mca_rendez_int_handler(int rendez_irq, void *arg) (long)&nd, 0, 0) == NOTIFY_STOP) ia64_mca_spin(__FUNCTION__); + ia64_mc_info.imi_rendez_checkin[cpu] = IA64_MCA_RENDEZ_CHECKIN_NOTDONE; /* Enable all interrupts */ local_irq_restore(flags); return IRQ_HANDLED; @@ -1221,26 +1222,27 @@ ia64_mca_handler(struct pt_regs *regs, struct switch_stack *sw, if (notify_die(DIE_MCA_MONARCH_ENTER, "MCA", regs, (long)&nd, 0, 0) == NOTIFY_STOP) ia64_mca_spin(__FUNCTION__); + + ia64_mc_info.imi_rendez_checkin[cpu] = IA64_MCA_RENDEZ_CHECKIN_CONCURRENT_MCA; if (sos->monarch) { ia64_wait_for_slaves(cpu, "MCA"); + + /* Wakeup all the processors which are spinning in the + * rendezvous loop. They will leave SAL, then spin in the OS + * with interrupts disabled until this monarch cpu leaves the + * MCA handler. That gets control back to the OS so we can + * backtrace the other cpus, backtrace when spinning in SAL + * does not work. + */ + ia64_mca_wakeup_all(); + if (notify_die(DIE_MCA_MONARCH_PROCESS, "MCA", regs, (long)&nd, 0, 0) + == NOTIFY_STOP) + ia64_mca_spin(__FUNCTION__); } else { - ia64_mc_info.imi_rendez_checkin[cpu] = IA64_MCA_RENDEZ_CHECKIN_CONCURRENT_MCA; while (cpu_isset(cpu, mca_cpu)) cpu_relax(); /* spin until monarch wakes us */ - ia64_mc_info.imi_rendez_checkin[cpu] = IA64_MCA_RENDEZ_CHECKIN_NOTDONE; } - /* Wakeup all the processors which are spinning in the rendezvous loop. - * They will leave SAL, then spin in the OS with interrupts disabled - * until this monarch cpu leaves the MCA handler. That gets control - * back to the OS so we can backtrace the other cpus, backtrace when - * spinning in SAL does not work. - */ - ia64_mca_wakeup_all(); - if (notify_die(DIE_MCA_MONARCH_PROCESS, "MCA", regs, (long)&nd, 0, 0) - == NOTIFY_STOP) - ia64_mca_spin(__FUNCTION__); - /* Get the MCA error record and log it */ ia64_mca_log_sal_error_record(SAL_INFO_TYPE_MCA); @@ -1274,21 +1276,22 @@ ia64_mca_handler(struct pt_regs *regs, struct switch_stack *sw, /* wake up the next monarch cpu, * and put this cpu in the rendez loop. */ - ia64_mc_info.imi_rendez_checkin[cpu] = IA64_MCA_RENDEZ_CHECKIN_CONCURRENT_MCA; for_each_online_cpu(i) { if (cpu_isset(i, mca_cpu)) { monarch_cpu = i; cpu_clear(i, mca_cpu); /* wake next cpu */ while (monarch_cpu != -1) cpu_relax(); /* spin until last cpu leaves */ - ia64_mc_info.imi_rendez_checkin[cpu] = IA64_MCA_RENDEZ_CHECKIN_NOTDONE; set_curr_task(cpu, previous_current); + ia64_mc_info.imi_rendez_checkin[cpu] + = IA64_MCA_RENDEZ_CHECKIN_NOTDONE; return; } } } set_curr_task(cpu, previous_current); - monarch_cpu = -1; + ia64_mc_info.imi_rendez_checkin[cpu] = IA64_MCA_RENDEZ_CHECKIN_NOTDONE; + monarch_cpu = -1; /* This frees the slaves and previous monarchs */ } static DECLARE_WORK(cmc_disable_work, ia64_mca_cmc_vector_disable_keventd); -- cgit v1.2.3 From a62c9fe4637f62e3901f8268778dbc8100281d40 Mon Sep 17 00:00:00 2001 From: Simon Horman Date: Wed, 19 Sep 2007 14:02:20 +0900 Subject: [IA64] Remove vector from ia64_machine_kexec() The use of vector in ia64_machine_kexec() seems spurious, and removing it simplifies the code slightly. As suggested by Alex Williamson Cc: Alex Williamson Signed-off-by: Simon Horman Signed-off-by: Tony Luck --- arch/ia64/kernel/machine_kexec.c | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/ia64/kernel/machine_kexec.c b/arch/ia64/kernel/machine_kexec.c index 4f0f3b8c1ee2..58e943a5d95c 100644 --- a/arch/ia64/kernel/machine_kexec.c +++ b/arch/ia64/kernel/machine_kexec.c @@ -79,7 +79,6 @@ static void ia64_machine_kexec(struct unw_frame_info *info, void *arg) relocate_new_kernel_t rnk; void *pal_addr = efi_get_pal_addr(); unsigned long code_addr = (unsigned long)page_address(image->control_code_page); - unsigned long vector; int ii; BUG_ON(!image); @@ -107,11 +106,8 @@ static void ia64_machine_kexec(struct unw_frame_info *info, void *arg) /* unmask TPR and clear any pending interrupts */ ia64_setreg(_IA64_REG_CR_TPR, 0); ia64_srlz_d(); - vector = ia64_get_ivr(); - while (vector != IA64_SPURIOUS_INT_VECTOR) { + while (ia64_get_ivr() != IA64_SPURIOUS_INT_VECTOR) ia64_eoi(); - vector = ia64_get_ivr(); - } platform_kernel_launch_event(); rnk = (relocate_new_kernel_t)&code_addr; (*rnk)(image->head, image->start, ia64_boot_param, -- cgit v1.2.3 From ac542a513bd7905fa1a700881e0a40a94d3ed46a Mon Sep 17 00:00:00 2001 From: Kenji Kaneshige Date: Sat, 1 Sep 2007 16:36:26 +0900 Subject: [IA64] Fix kernel panic in kdump on INIT Fix the problem that kdump on INIT causes a kernel panic if kdump kernel image is not configured. The cause of this problem is machine_kexec_on_init() is using printk in INIT context. It should use ia64_mca_printk() instead. Signed-off-by: Kenji Kaneshige Signed-off-by: Tony Luck --- arch/ia64/kernel/crash.c | 2 +- arch/ia64/kernel/mca_drv.h | 2 -- include/asm-ia64/mca.h | 2 ++ 3 files changed, 3 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/ia64/kernel/crash.c b/arch/ia64/kernel/crash.c index 1d64ef478dde..b2367dd66766 100644 --- a/arch/ia64/kernel/crash.c +++ b/arch/ia64/kernel/crash.c @@ -119,7 +119,7 @@ static void machine_kdump_on_init(void) { if (!ia64_kimage) { - printk(KERN_NOTICE "machine_kdump_on_init(): " + ia64_mca_printk(KERN_NOTICE "machine_kdump_on_init(): " "kdump not configured\n"); return; } diff --git a/arch/ia64/kernel/mca_drv.h b/arch/ia64/kernel/mca_drv.h index c85e943ba5fd..485e34d0b199 100644 --- a/arch/ia64/kernel/mca_drv.h +++ b/arch/ia64/kernel/mca_drv.h @@ -118,7 +118,5 @@ struct mca_table_entry { extern const struct mca_table_entry *search_mca_tables (unsigned long addr); extern int mca_recover_range(unsigned long); -extern void ia64_mca_printk(const char * fmt, ...) - __attribute__ ((format (printf, 1, 2))); extern void ia64_mlogbuf_dump(void); diff --git a/include/asm-ia64/mca.h b/include/asm-ia64/mca.h index edd5d01028df..823553bf12e6 100644 --- a/include/asm-ia64/mca.h +++ b/include/asm-ia64/mca.h @@ -151,6 +151,8 @@ extern void ia64_mca_cmc_vector_setup(void); extern int ia64_reg_MCA_extension(int (*fn)(void *, struct ia64_sal_os_state *)); extern void ia64_unreg_MCA_extension(void); extern u64 ia64_get_rnat(u64 *); +extern void ia64_mca_printk(const char * fmt, ...) + __attribute__ ((format (printf, 1, 2))); struct ia64_mca_notify_die { struct ia64_sal_os_state *sos; -- cgit v1.2.3 From 2010d7fe787b39afd31daba5d5284dd432de4e8f Mon Sep 17 00:00:00 2001 From: Kenji Kaneshige Date: Sat, 1 Sep 2007 16:37:48 +0900 Subject: [IA64] Fix kernel hangup in kdump on INIT Fix the problem that kdump on INIT hung up if kdump kernel image is not configured. The kdump_init_notifier() on monarch CPU stops its operation at DIE_INIT_MONARCH_LEAVE time if the kdump kernel image is not configured. On the other hand, kdump_init_notifier() on non-monarch CPUs get into spin because they don't know the fact the monarch stops its operation. This is the cause of this problem. To fix this problem, we need to check the kdump kernel image at the top of the kdump_init_notifier() function. Signed-off-by: Kenji Kaneshige Signed-off-by: Tony Luck --- arch/ia64/kernel/crash.c | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/ia64/kernel/crash.c b/arch/ia64/kernel/crash.c index b2367dd66766..f1cf2df97a2d 100644 --- a/arch/ia64/kernel/crash.c +++ b/arch/ia64/kernel/crash.c @@ -118,11 +118,6 @@ machine_crash_shutdown(struct pt_regs *pt) static void machine_kdump_on_init(void) { - if (!ia64_kimage) { - ia64_mca_printk(KERN_NOTICE "machine_kdump_on_init(): " - "kdump not configured\n"); - return; - } local_irq_disable(); kexec_disable_iosapic(); machine_kexec(ia64_kimage); @@ -156,6 +151,14 @@ kdump_init_notifier(struct notifier_block *self, unsigned long val, void *data) if (!kdump_on_init) return NOTIFY_DONE; + if (!ia64_kimage) { + if (val == DIE_INIT_MONARCH_LEAVE) + ia64_mca_printk(KERN_NOTICE + "%s: kdump not configured\n", + __FUNCTION__); + return NOTIFY_DONE; + } + if (val != DIE_INIT_MONARCH_LEAVE && val != DIE_INIT_SLAVE_LEAVE && val != DIE_INIT_MONARCH_PROCESS && -- cgit v1.2.3 From 432a7d6587fc5028421342785f6c9552c9fba175 Mon Sep 17 00:00:00 2001 From: Jes Sorensen Date: Wed, 19 Sep 2007 11:54:55 +0200 Subject: [IA64] update sn2_defconfig Update defonfig file for sn2 to match recent changes in config options. Signed-off-by: Jes Sorensen Signed-off-by: Tony Luck --- arch/ia64/configs/sn2_defconfig | 443 +++++++++++++++++----------------------- 1 file changed, 189 insertions(+), 254 deletions(-) (limited to 'arch') diff --git a/arch/ia64/configs/sn2_defconfig b/arch/ia64/configs/sn2_defconfig index 9aecfceeb38c..449d3e75bfc2 100644 --- a/arch/ia64/configs/sn2_defconfig +++ b/arch/ia64/configs/sn2_defconfig @@ -1,40 +1,40 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.19-rc1 -# Mon Oct 9 10:53:59 2006 +# Linux kernel version: 2.6.23-rc6 +# Tue Sep 18 11:24:01 2007 # CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # -# Code maturity level options +# General setup # CONFIG_EXPERIMENTAL=y CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# CONFIG_LOCALVERSION="" # CONFIG_LOCALVERSION_AUTO is not set CONFIG_SWAP=y CONFIG_SYSVIPC=y -# CONFIG_IPC_NS is not set +CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_TASKSTATS=y # CONFIG_TASK_DELAY_ACCT is not set -# CONFIG_UTS_NS is not set +CONFIG_TASK_XACCT=y +CONFIG_TASK_IO_ACCOUNTING=y +# CONFIG_USER_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=20 CONFIG_CPUSETS=y +CONFIG_SYSFS_DEPRECATED=y CONFIG_RELAY=y +CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" CONFIG_CC_OPTIMIZE_FOR_SIZE=y -CONFIG_TASK_XACCT=y CONFIG_SYSCTL=y # CONFIG_EMBEDDED is not set -# CONFIG_SYSCTL_SYSCALL is not set +CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y # CONFIG_KALLSYMS_EXTRA_PASS is not set @@ -44,18 +44,20 @@ CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y +CONFIG_ANON_INODES=y CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y CONFIG_SHMEM=y -CONFIG_SLUB=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLUB_DEBUG=y +# CONFIG_SLAB is not set +CONFIG_SLUB=y +# CONFIG_SLOB is not set CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 -# CONFIG_SLOB is not set - -# -# Loadable module support -# CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set @@ -63,12 +65,9 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_KMOD=y CONFIG_STOP_MACHINE=y - -# -# Block layer -# CONFIG_BLOCK=y # CONFIG_BLK_DEV_IO_TRACE is not set +CONFIG_BLK_DEV_BSG=y # # IO Schedulers @@ -88,12 +87,15 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # CONFIG_IA64=y CONFIG_64BIT=y +CONFIG_QUICKLIST=y CONFIG_MMU=y -CONFIG_SWIOTLB=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_DMI=y CONFIG_EFI=y CONFIG_GENERIC_IOMAP=y @@ -116,6 +118,7 @@ CONFIG_IA64_PAGE_SIZE_16KB=y CONFIG_PGTABLE_4=y # CONFIG_HZ_100 is not set CONFIG_HZ_250=y +# CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 CONFIG_IA64_L1_CACHE_SHIFT=7 @@ -128,7 +131,10 @@ CONFIG_NR_CPUS=1024 # CONFIG_HOTPLUG_CPU is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_SCHED_SMT=y -CONFIG_PREEMPT=y +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +CONFIG_PREEMPT_BKL=y CONFIG_SELECT_MEMORY_MODEL=y # CONFIG_FLATMEM_MANUAL is not set CONFIG_DISCONTIGMEM_MANUAL=y @@ -140,6 +146,9 @@ CONFIG_NEED_MULTIPLE_NODES=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y CONFIG_RESOURCES_64BIT=y +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_NR_QUICK=1 +CONFIG_VIRT_TO_BUS=y CONFIG_ARCH_SELECT_MEMORY_MODEL=y CONFIG_ARCH_DISCONTIGMEM_ENABLE=y CONFIG_ARCH_FLATMEM_ENABLE=y @@ -154,16 +163,17 @@ CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y CONFIG_HAVE_ARCH_NODEDATA_EXTENSION=y CONFIG_IA32_SUPPORT=y CONFIG_COMPAT=y +CONFIG_COMPAT_FOR_U64_ALIGNMENT=y CONFIG_IA64_MCA_RECOVERY=y CONFIG_PERFMON=y CONFIG_IA64_PALINFO=y +CONFIG_IA64_MC_ERR_INJECT=y CONFIG_SGI_SN=y # CONFIG_IA64_ESI is not set # # SN Devices # -CONFIG_SGI_IOC4=y CONFIG_SGI_IOC3=y # @@ -171,6 +181,7 @@ CONFIG_SGI_IOC3=y # CONFIG_EFI_VARS=y CONFIG_EFI_PCDP=y +CONFIG_DMIID=y CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set @@ -180,12 +191,9 @@ CONFIG_BINFMT_ELF=y CONFIG_PM=y # CONFIG_PM_LEGACY is not set # CONFIG_PM_DEBUG is not set -# CONFIG_PM_SYSFS_DEPRECATED is not set - -# -# ACPI (Advanced Configuration and Power Interface) Support -# CONFIG_ACPI=y +# CONFIG_ACPI_PROCFS is not set +CONFIG_ACPI_PROC_EVENT=y # CONFIG_ACPI_BUTTON is not set # CONFIG_ACPI_FAN is not set # CONFIG_ACPI_DOCK is not set @@ -208,17 +216,14 @@ CONFIG_ACPI_SYSTEM=y # CONFIG_PCI=y CONFIG_PCI_DOMAINS=y +CONFIG_PCI_SYSCALL=y CONFIG_PCIEPORTBUS=y CONFIG_HOTPLUG_PCI_PCIE=y # CONFIG_HOTPLUG_PCI_PCIE_POLL_EVENT_MODE is not set CONFIG_PCIEAER=y +CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set -# CONFIG_PCI_MULTITHREAD_PROBE is not set # CONFIG_PCI_DEBUG is not set - -# -# PCI Hotplug Support -# CONFIG_HOTPLUG_PCI=y # CONFIG_HOTPLUG_PCI_FAKE is not set # CONFIG_HOTPLUG_PCI_ACPI is not set @@ -239,13 +244,13 @@ CONFIG_NET=y # # Networking options # -# CONFIG_NETDEBUG is not set CONFIG_PACKET=y CONFIG_PACKET_MMAP=y CONFIG_UNIX=y CONFIG_XFRM=y # CONFIG_XFRM_USER is not set # CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set # CONFIG_NET_KEY is not set CONFIG_INET=y CONFIG_IP_MULTICAST=y @@ -261,7 +266,7 @@ CONFIG_SYN_COOKIES=y # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set # CONFIG_INET_XFRM_TUNNEL is not set -# CONFIG_INET_TUNNEL is not set +CONFIG_INET_TUNNEL=m CONFIG_INET_XFRM_MODE_TRANSPORT=y CONFIG_INET_XFRM_MODE_TUNNEL=y CONFIG_INET_XFRM_MODE_BEET=y @@ -270,9 +275,11 @@ CONFIG_INET_TCP_DIAG=m # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set CONFIG_IPV6=m # CONFIG_IPV6_PRIVACY is not set # CONFIG_IPV6_ROUTER_PREF is not set +# CONFIG_IPV6_OPTIMISTIC_DAD is not set # CONFIG_INET6_AH is not set # CONFIG_INET6_ESP is not set # CONFIG_INET6_IPCOMP is not set @@ -283,25 +290,13 @@ CONFIG_INET6_XFRM_MODE_TRANSPORT=m CONFIG_INET6_XFRM_MODE_TUNNEL=m CONFIG_INET6_XFRM_MODE_BEET=m # CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set +CONFIG_IPV6_SIT=m # CONFIG_IPV6_TUNNEL is not set -# CONFIG_IPV6_SUBTREES is not set # CONFIG_IPV6_MULTIPLE_TABLES is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set - -# -# DCCP Configuration (EXPERIMENTAL) -# # CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# # CONFIG_IP_SCTP is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -327,7 +322,17 @@ CONFIG_INET6_XFRM_MODE_BEET=m # CONFIG_HAMRADIO is not set # CONFIG_IRDA is not set # CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set # # Device Drivers @@ -340,31 +345,19 @@ CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y # CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set - -# -# Connector - unified userspace <-> kernelspace linker -# # CONFIG_CONNECTOR is not set - -# -# Memory Technology Devices (MTD) -# # CONFIG_MTD is not set - -# -# Parallel port support -# # CONFIG_PARPORT is not set +CONFIG_PNP=y +# CONFIG_PNP_DEBUG is not set # -# Plug and Play support -# -# CONFIG_PNP is not set - -# -# Block devices +# Protocols # +CONFIG_PNPACPI=y +CONFIG_BLK_DEV=y # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set @@ -379,13 +372,13 @@ CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 -CONFIG_BLK_DEV_INITRD=y # CONFIG_CDROM_PKTCDVD is not set CONFIG_ATA_OVER_ETH=m - -# -# ATA/ATAPI/MFM/RLL support -# +CONFIG_MISC_DEVICES=y +# CONFIG_PHANTOM is not set +# CONFIG_EEPROM_93CX6 is not set +CONFIG_SGI_IOC4=y +# CONFIG_TIFM_CORE is not set CONFIG_IDE=y CONFIG_IDE_MAX_HWIFS=4 CONFIG_BLK_DEV_IDE=y @@ -400,20 +393,23 @@ CONFIG_BLK_DEV_IDECD=y # CONFIG_BLK_DEV_IDETAPE is not set # CONFIG_BLK_DEV_IDEFLOPPY is not set # CONFIG_BLK_DEV_IDESCSI is not set +# CONFIG_BLK_DEV_IDEACPI is not set # CONFIG_IDE_TASK_IOCTL is not set +CONFIG_IDE_PROC_FS=y # # IDE chipset support/bugfixes # CONFIG_IDE_GENERIC=y +# CONFIG_BLK_DEV_IDEPNP is not set CONFIG_BLK_DEV_IDEPCI=y CONFIG_IDEPCI_SHARE_IRQ=y +CONFIG_IDEPCI_PCIBUS_ORDER=y # CONFIG_BLK_DEV_OFFBOARD is not set # CONFIG_BLK_DEV_GENERIC is not set # CONFIG_BLK_DEV_OPTI621 is not set CONFIG_BLK_DEV_IDEDMA_PCI=y # CONFIG_BLK_DEV_IDEDMA_FORCED is not set -CONFIG_IDEDMA_PCI_AUTO=y # CONFIG_IDEDMA_ONLYDISK is not set # CONFIG_BLK_DEV_AEC62XX is not set # CONFIG_BLK_DEV_ALI15X3 is not set @@ -428,6 +424,7 @@ CONFIG_IDEDMA_PCI_AUTO=y # CONFIG_BLK_DEV_JMICRON is not set # CONFIG_BLK_DEV_SC1200 is not set # CONFIG_BLK_DEV_PIIX is not set +# CONFIG_BLK_DEV_IT8213 is not set # CONFIG_BLK_DEV_IT821X is not set # CONFIG_BLK_DEV_NS87415 is not set # CONFIG_BLK_DEV_PDC202XX_OLD is not set @@ -438,10 +435,10 @@ CONFIG_BLK_DEV_SGIIOC4=y # CONFIG_BLK_DEV_SLC90E66 is not set # CONFIG_BLK_DEV_TRM290 is not set # CONFIG_BLK_DEV_VIA82CXXX is not set +# CONFIG_BLK_DEV_TC86C001 is not set # CONFIG_IDE_ARM is not set CONFIG_BLK_DEV_IDEDMA=y # CONFIG_IDEDMA_IVB is not set -CONFIG_IDEDMA_AUTO=y # CONFIG_BLK_DEV_HD is not set # @@ -449,6 +446,8 @@ CONFIG_IDEDMA_AUTO=y # # CONFIG_RAID_ATTRS is not set CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set CONFIG_SCSI_NETLINK=y CONFIG_SCSI_PROC_FS=y @@ -469,6 +468,8 @@ CONFIG_CHR_DEV_SCH=m # CONFIG_SCSI_MULTI_LUN is not set CONFIG_SCSI_CONSTANTS=y # CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m # # SCSI Transports @@ -478,11 +479,9 @@ CONFIG_SCSI_FC_ATTRS=y CONFIG_SCSI_ISCSI_ATTRS=m CONFIG_SCSI_SAS_ATTRS=y CONFIG_SCSI_SAS_LIBSAS=y +# CONFIG_SCSI_SAS_ATA is not set # CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set - -# -# SCSI low-level drivers -# +CONFIG_SCSI_LOWLEVEL=y CONFIG_ISCSI_TCP=m # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set @@ -512,11 +511,10 @@ CONFIG_SCSI_QLA_FC=y # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_DEBUG is not set - -# -# Serial ATA (prod) and Parallel ATA (experimental) drivers -# +# CONFIG_SCSI_SRP is not set CONFIG_ATA=y +CONFIG_ATA_NONSTANDARD=y +CONFIG_ATA_ACPI=y # CONFIG_SATA_AHCI is not set # CONFIG_SATA_SVW is not set # CONFIG_ATA_PIIX is not set @@ -532,10 +530,12 @@ CONFIG_ATA=y # CONFIG_SATA_ULI is not set # CONFIG_SATA_VIA is not set CONFIG_SATA_VITESSE=y +# CONFIG_SATA_INIC162X is not set # CONFIG_PATA_ALI is not set # CONFIG_PATA_AMD is not set # CONFIG_PATA_ARTOP is not set # CONFIG_PATA_ATIIXP is not set +# CONFIG_PATA_CMD640_PCI is not set # CONFIG_PATA_CMD64X is not set # CONFIG_PATA_CS5520 is not set # CONFIG_PATA_CS5530 is not set @@ -547,8 +547,10 @@ CONFIG_SATA_VITESSE=y # CONFIG_PATA_HPT3X2N is not set # CONFIG_PATA_HPT3X3 is not set # CONFIG_PATA_IT821X is not set +# CONFIG_PATA_IT8213 is not set # CONFIG_PATA_JMICRON is not set # CONFIG_PATA_TRIFLEX is not set +# CONFIG_PATA_MARVELL is not set # CONFIG_PATA_MPIIX is not set # CONFIG_PATA_OLDPIIX is not set # CONFIG_PATA_NETCELL is not set @@ -565,10 +567,6 @@ CONFIG_SATA_VITESSE=y # CONFIG_PATA_SIS is not set # CONFIG_PATA_VIA is not set # CONFIG_PATA_WINBOND is not set - -# -# Multi-device support (RAID and LVM) -# CONFIG_MD=y CONFIG_BLK_DEV_MD=y CONFIG_MD_LINEAR=y @@ -587,6 +585,8 @@ CONFIG_DM_MIRROR=m CONFIG_DM_ZERO=m CONFIG_DM_MULTIPATH=m CONFIG_DM_MULTIPATH_EMC=m +# CONFIG_DM_MULTIPATH_RDAC is not set +# CONFIG_DM_DELAY is not set # # Fusion MPT device support @@ -597,43 +597,25 @@ CONFIG_FUSION_FC=y CONFIG_FUSION_SAS=y CONFIG_FUSION_MAX_SGE=128 CONFIG_FUSION_CTL=m +CONFIG_FUSION_LOGGING=y # # IEEE 1394 (FireWire) support # +# CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set - -# -# I2O device support -# # CONFIG_I2O is not set - -# -# Network device support -# CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set - -# -# ARCnet devices -# +# CONFIG_NET_SB1000 is not set # CONFIG_ARCNET is not set - -# -# PHY device support -# - -# -# Ethernet (10 or 100Mbit) -# # CONFIG_NET_ETHERNET is not set - -# -# Ethernet (1000 Mbit) -# +CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set # CONFIG_E1000 is not set @@ -645,32 +627,39 @@ CONFIG_NETDEVICES=y # CONFIG_SKGE is not set # CONFIG_SKY2 is not set # CONFIG_SK98LIN is not set +# CONFIG_VIA_VELOCITY is not set CONFIG_TIGON3=y # CONFIG_BNX2 is not set # CONFIG_QLA3XXX is not set - -# -# Ethernet (10000 Mbit) -# +# CONFIG_ATL1 is not set +CONFIG_NETDEV_10000=y CONFIG_CHELSIO_T1=m +CONFIG_CHELSIO_T1_1G=y +# CONFIG_CHELSIO_T1_NAPI is not set +CONFIG_CHELSIO_T3=m # CONFIG_IXGB is not set CONFIG_S2IO=m # CONFIG_S2IO_NAPI is not set # CONFIG_MYRI10GE is not set - -# -# Token Ring devices -# +# CONFIG_NETXEN_NIC is not set +# CONFIG_MLX4_CORE is not set # CONFIG_TR is not set # -# Wireless LAN (non-hamradio) +# Wireless LAN # -# CONFIG_NET_RADIO is not set +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set # -# Wan interfaces +# USB Network Adapters # +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET_MII is not set +# CONFIG_USB_USBNET is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set @@ -680,18 +669,9 @@ CONFIG_S2IO=m # CONFIG_SHAPER is not set CONFIG_NETCONSOLE=y CONFIG_NETPOLL=y -# CONFIG_NETPOLL_RX is not set # CONFIG_NETPOLL_TRAP is not set CONFIG_NET_POLL_CONTROLLER=y - -# -# ISDN subsystem -# # CONFIG_ISDN is not set - -# -# Telephony Support -# # CONFIG_PHONE is not set # @@ -699,6 +679,7 @@ CONFIG_NET_POLL_CONTROLLER=y # CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set # # Userland interfaces @@ -718,6 +699,7 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_KEYBOARD is not set # CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set # CONFIG_INPUT_TOUCHSCREEN is not set # CONFIG_INPUT_MISC is not set @@ -741,6 +723,7 @@ CONFIG_SERIAL_NONSTANDARD=y # CONFIG_DIGIEPCA is not set # CONFIG_MOXA_INTELLIO is not set # CONFIG_MOXA_SMARTIO is not set +# CONFIG_MOXA_SMARTIO_NEW is not set # CONFIG_ISI is not set # CONFIG_SYNCLINKMP is not set # CONFIG_SYNCLINK_GT is not set @@ -752,7 +735,6 @@ CONFIG_SERIAL_NONSTANDARD=y CONFIG_SGI_SNSC=y CONFIG_SGI_TIOCX=y CONFIG_SGI_MBCS=m -CONFIG_MSPEC=y # # Serial drivers @@ -771,28 +753,13 @@ CONFIG_SERIAL_SGI_IOC3=y CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 - -# -# IPMI -# # CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# # CONFIG_WATCHDOG is not set # CONFIG_HW_RANDOM is not set CONFIG_EFI_RTC=y -# CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set - -# -# Ftape, the floppy tape device driver -# CONFIG_AGP=y -# CONFIG_AGP_SIS is not set -# CONFIG_AGP_VIA is not set CONFIG_AGP_SGI_TIOCA=y # CONFIG_DRM is not set CONFIG_RAW_DRIVER=m @@ -800,16 +767,8 @@ CONFIG_MAX_RAW_DEVS=256 # CONFIG_HPET is not set # CONFIG_HANGCHECK_TIMER is not set CONFIG_MMTIMER=y - -# -# TPM devices -# # CONFIG_TCG_TPM is not set -# CONFIG_TELCLOCK is not set - -# -# I2C support -# +CONFIG_DEVPORT=y # CONFIG_I2C is not set # @@ -817,37 +776,33 @@ CONFIG_MMTIMER=y # # CONFIG_SPI is not set # CONFIG_SPI_MASTER is not set - -# -# Dallas's 1-wire bus -# - -# -# Hardware Monitoring support -# +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set -# CONFIG_HWMON_VID is not set # -# Misc devices +# Multifunction device drivers # -# CONFIG_TIFM_CORE is not set +# CONFIG_MFD_SM501 is not set # # Multimedia devices # # CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +# CONFIG_DAB is not set # -# Digital Video Broadcasting Devices +# Graphics support # -# CONFIG_DVB is not set -# CONFIG_USB_DABUSB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # -# Graphics support +# Display device support # -CONFIG_FIRMWARE_EDID=y +# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_VGASTATE is not set +CONFIG_VIDEO_OUTPUT_CONTROL=m # CONFIG_FB is not set # @@ -856,16 +811,29 @@ CONFIG_FIRMWARE_EDID=y CONFIG_VGA_CONSOLE=y # CONFIG_VGACON_SOFT_SCROLLBACK is not set CONFIG_DUMMY_CONSOLE=y -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Sound # # CONFIG_SOUND is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +CONFIG_HID_DEBUG=y # -# USB support +# USB Input Devices +# +CONFIG_USB_HID=m +# CONFIG_USB_HIDINPUT_POWERBOOK is not set +# CONFIG_HID_FF is not set +# CONFIG_USB_HIDDEV is not set + +# +# USB HID Boot Protocol drivers # +# CONFIG_USB_KBD is not set +# CONFIG_USB_MOUSE is not set +CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y @@ -876,9 +844,10 @@ CONFIG_USB=m # Miscellaneous USB options # # CONFIG_USB_DEVICEFS is not set -# CONFIG_USB_BANDWIDTH is not set +CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_SUSPEND is not set +# CONFIG_USB_PERSIST is not set # CONFIG_USB_OTG is not set # @@ -890,10 +859,12 @@ CONFIG_USB_EHCI_HCD=m # CONFIG_USB_EHCI_TT_NEWSCHED is not set # CONFIG_USB_ISP116X_HCD is not set CONFIG_USB_OHCI_HCD=m -# CONFIG_USB_OHCI_BIG_ENDIAN is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set CONFIG_USB_OHCI_LITTLE_ENDIAN=y CONFIG_USB_UHCI_HCD=m # CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set # # USB Device Class drivers @@ -911,48 +882,11 @@ CONFIG_USB_UHCI_HCD=m # CONFIG_USB_STORAGE is not set # CONFIG_USB_LIBUSUAL is not set -# -# USB Input Devices -# -CONFIG_USB_HID=m -CONFIG_USB_HIDINPUT=y -# CONFIG_USB_HIDINPUT_POWERBOOK is not set -# CONFIG_HID_FF is not set -# CONFIG_USB_HIDDEV is not set - -# -# USB HID Boot Protocol drivers -# -# CONFIG_USB_KBD is not set -# CONFIG_USB_MOUSE is not set -# CONFIG_USB_AIPTEK is not set -# CONFIG_USB_WACOM is not set -# CONFIG_USB_ACECAD is not set -# CONFIG_USB_KBTAB is not set -# CONFIG_USB_POWERMATE is not set -# CONFIG_USB_TOUCHSCREEN is not set -# CONFIG_USB_YEALINK is not set -# CONFIG_USB_XPAD is not set -# CONFIG_USB_ATI_REMOTE is not set -# CONFIG_USB_ATI_REMOTE2 is not set -# CONFIG_USB_KEYSPAN_REMOTE is not set -# CONFIG_USB_APPLETOUCH is not set -# CONFIG_USB_TRANCEVIBRATOR is not set - # # USB Imaging devices # # CONFIG_USB_MDC800 is not set # CONFIG_USB_MICROTEK is not set - -# -# USB Network Adapters -# -# CONFIG_USB_CATC is not set -# CONFIG_USB_KAWETH is not set -# CONFIG_USB_PEGASUS is not set -# CONFIG_USB_RTL8150 is not set -# CONFIG_USB_USBNET is not set CONFIG_USB_MON=y # @@ -974,6 +908,7 @@ CONFIG_USB_MON=y # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set @@ -983,6 +918,8 @@ CONFIG_USB_MON=y # CONFIG_USB_APPLEDISPLAY is not set # CONFIG_USB_SISUSBVGA is not set # CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set # # USB DSL modem support @@ -992,48 +929,24 @@ CONFIG_USB_MON=y # USB Gadget Support # # CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# # CONFIG_MMC is not set - -# -# LED devices -# # CONFIG_NEW_LEDS is not set - -# -# LED drivers -# - -# -# LED Triggers -# - -# -# InfiniBand support -# CONFIG_INFINIBAND=m # CONFIG_INFINIBAND_USER_MAD is not set CONFIG_INFINIBAND_USER_ACCESS=m +CONFIG_INFINIBAND_USER_MEM=y CONFIG_INFINIBAND_ADDR_TRANS=y CONFIG_INFINIBAND_MTHCA=m CONFIG_INFINIBAND_MTHCA_DEBUG=y # CONFIG_INFINIBAND_AMSO1100 is not set +# CONFIG_INFINIBAND_CXGB3 is not set +# CONFIG_MLX4_INFINIBAND is not set CONFIG_INFINIBAND_IPOIB=m +# CONFIG_INFINIBAND_IPOIB_CM is not set CONFIG_INFINIBAND_IPOIB_DEBUG=y # CONFIG_INFINIBAND_IPOIB_DEBUG_DATA is not set CONFIG_INFINIBAND_SRP=m # CONFIG_INFINIBAND_ISER is not set - -# -# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) -# - -# -# Real Time Clock -# # CONFIG_RTC_CLASS is not set # @@ -1049,6 +962,12 @@ CONFIG_INFINIBAND_SRP=m # DMA Devices # +# +# Userspace I/O +# +# CONFIG_UIO is not set +CONFIG_MSPEC=y + # # File systems # @@ -1061,6 +980,7 @@ CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y CONFIG_EXT3_FS_POSIX_ACL=y CONFIG_EXT3_FS_SECURITY=y +# CONFIG_EXT4DEV_FS is not set CONFIG_JBD=y # CONFIG_JBD_DEBUG is not set CONFIG_FS_MBCACHE=y @@ -1161,6 +1081,7 @@ CONFIG_EXPORTFS=m CONFIG_NFS_COMMON=y CONFIG_SUNRPC=m CONFIG_SUNRPC_GSS=m +# CONFIG_SUNRPC_BIND34 is not set CONFIG_RPCSEC_GSS_KRB5=m # CONFIG_RPCSEC_GSS_SPKM3 is not set CONFIG_SMB_FS=m @@ -1174,7 +1095,6 @@ CONFIG_CIFS=m # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set # # Partition Types @@ -1196,6 +1116,7 @@ CONFIG_SGI_PARTITION=y # CONFIG_SUN_PARTITION is not set # CONFIG_KARMA_PARTITION is not set CONFIG_EFI_PARTITION=y +# CONFIG_SYSV68_PARTITION is not set # # Native Language Support @@ -1244,18 +1165,25 @@ CONFIG_NLS_UTF8=y # # Distributed Lock Manager # +# CONFIG_DLM is not set # # Library routines # +CONFIG_BITREVERSE=y # CONFIG_CRC_CCITT is not set CONFIG_CRC16=m +# CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y +# CONFIG_CRC7 is not set CONFIG_LIBCRC32C=m CONFIG_ZLIB_INFLATE=m CONFIG_ZLIB_DEFLATE=m CONFIG_GENERIC_ALLOCATOR=y CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_GENERIC_PENDING_IRQ=y @@ -1274,25 +1202,28 @@ CONFIG_IRQ_PER_CPU=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set CONFIG_DEBUG_KERNEL=y -CONFIG_LOG_BUF_SHIFT=20 +# CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y +CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set -# CONFIG_DEBUG_SLAB is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_SLUB_DEBUG_ON is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_MUTEXES is not set -# CONFIG_DEBUG_RWSEMS is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set CONFIG_DEBUG_INFO=y -# CONFIG_DEBUG_FS is not set # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_LIST is not set CONFIG_FORCED_INLINING=y # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_FAULT_INJECTION is not set CONFIG_IA64_GRANULE_16MB=y # CONFIG_IA64_GRANULE_64MB is not set # CONFIG_IA64_PRINT_HAZARDS is not set @@ -1306,16 +1237,17 @@ CONFIG_SYSVIPC_COMPAT=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set - -# -# Cryptographic options -# +CONFIG_XOR_BLOCKS=y +CONFIG_ASYNC_CORE=y +CONFIG_ASYNC_MEMCPY=y +CONFIG_ASYNC_XOR=y CONFIG_CRYPTO=y CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_BLKCIPHER=m CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_MANAGER=m +CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_HMAC=y +# CONFIG_CRYPTO_XCBC is not set # CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y @@ -1324,9 +1256,14 @@ CONFIG_CRYPTO_SHA1=m # CONFIG_CRYPTO_SHA512 is not set # CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_GF128MUL is not set CONFIG_CRYPTO_ECB=m CONFIG_CRYPTO_CBC=m +CONFIG_CRYPTO_PCBC=m +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_CRYPTD is not set CONFIG_CRYPTO_DES=m +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_BLOWFISH is not set # CONFIG_CRYPTO_TWOFISH is not set # CONFIG_CRYPTO_SERPENT is not set @@ -1340,8 +1277,6 @@ CONFIG_CRYPTO_DES=m CONFIG_CRYPTO_DEFLATE=m # CONFIG_CRYPTO_MICHAEL_MIC is not set CONFIG_CRYPTO_CRC32C=m +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_TEST is not set - -# -# Hardware crypto devices -# +# CONFIG_CRYPTO_HW is not set -- cgit v1.2.3