From 280fa349757bb240c650882feee5a861150ccc2d Mon Sep 17 00:00:00 2001 From: Matthias Kaehlcke Date: Tue, 9 Apr 2019 16:14:05 -0700 Subject: ARM: dts: rockchip: Add BT_EN to the power sequence for veyron Add GPIO D5 (BT_ENABLE_L) as reset-GPIO to the power sequence for the Bluetooth/WiFi module. On devices with a Broadcom module the signal needs to be asserted to use Bluetooth. Note that BT_ENABLE_L is a misnomer in the schematics, the signal actually is active-high. Signed-off-by: Matthias Kaehlcke Reviewed-by: Douglas Anderson Signed-off-by: Heiko Stuebner --- arch/arm/boot/dts/rk3288-veyron.dtsi | 13 ++++++++++--- 1 file changed, 10 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/rk3288-veyron.dtsi b/arch/arm/boot/dts/rk3288-veyron.dtsi index fa38eb967f12..efa7b425c9ed 100644 --- a/arch/arm/boot/dts/rk3288-veyron.dtsi +++ b/arch/arm/boot/dts/rk3288-veyron.dtsi @@ -62,12 +62,19 @@ pinctrl-0 = <&bt_enable_l>, <&wifi_enable_h>; /* - * On the module itself this is one of these (depending - * on the actual card populated): + * Depending on the actual card populated GPIO4 D4 and D5 + * correspond to one of these signals on the module: + * + * D4: * - SDIO_RESET_L_WL_REG_ON * - PDN (power down when low) + * + * D5: + * - BT_I2S_WS_BT_RFDISABLE_L + * - No connect */ - reset-gpios = <&gpio4 RK_PD4 GPIO_ACTIVE_LOW>; + reset-gpios = <&gpio4 RK_PD4 GPIO_ACTIVE_LOW>, + <&gpio4 RK_PD5 GPIO_ACTIVE_LOW>; }; vcc_5v: vcc-5v { -- cgit v1.2.3