From 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sat, 16 Apr 2005 15:20:36 -0700 Subject: Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! --- arch/ppc/platforms/tqm8xx.h | 179 ++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 179 insertions(+) create mode 100644 arch/ppc/platforms/tqm8xx.h (limited to 'arch/ppc/platforms/tqm8xx.h') diff --git a/arch/ppc/platforms/tqm8xx.h b/arch/ppc/platforms/tqm8xx.h new file mode 100644 index 000000000000..2150dc87b18f --- /dev/null +++ b/arch/ppc/platforms/tqm8xx.h @@ -0,0 +1,179 @@ +/* + * TQM8xx(L) board specific definitions + * + * Copyright (c) 1999-2002 Wolfgang Denk (wd@denx.de) + */ + +#ifdef __KERNEL__ +#ifndef __MACH_TQM8xx_H +#define __MACH_TQM8xx_H + +#include + +#include + +#ifndef __ASSEMBLY__ +#define TQM_IMMR_BASE 0xFFF00000 /* phys. addr of IMMR */ +#define TQM_IMAP_SIZE (64 * 1024) /* size of mapped area */ + +#define IMAP_ADDR TQM_IMMR_BASE /* physical base address of IMMR area */ +#define IMAP_SIZE TQM_IMAP_SIZE /* mapped size of IMMR area */ + +/*----------------------------------------------------------------------- + * PCMCIA stuff + *----------------------------------------------------------------------- + * + */ +#define PCMCIA_MEM_SIZE ( 64 << 20 ) + +#ifndef CONFIG_KUP4K +# define MAX_HWIFS 1 /* overwrite default in include/asm-ppc/ide.h */ + +#else /* CONFIG_KUP4K */ + +# define MAX_HWIFS 2 /* overwrite default in include/asm-ppc/ide.h */ +# ifndef __ASSEMBLY__ +# include +static __inline__ void ide_led(int on) +{ + volatile immap_t *immap = (immap_t *)IMAP_ADDR; + + if (on) { + immap->im_ioport.iop_padat &= ~0x80; + } else { + immap->im_ioport.iop_padat |= 0x80; + } +} +# endif /* __ASSEMBLY__ */ +# define IDE_LED(x) ide_led((x)) +#endif /* CONFIG_KUP4K */ + +/* + * Definitions for IDE0 Interface + */ +#define IDE0_BASE_OFFSET 0 +#define IDE0_DATA_REG_OFFSET (PCMCIA_MEM_SIZE + 0x320) +#define IDE0_ERROR_REG_OFFSET (2 * PCMCIA_MEM_SIZE + 0x320 + 1) +#define IDE0_NSECTOR_REG_OFFSET (2 * PCMCIA_MEM_SIZE + 0x320 + 2) +#define IDE0_SECTOR_REG_OFFSET (2 * PCMCIA_MEM_SIZE + 0x320 + 3) +#define IDE0_LCYL_REG_OFFSET (2 * PCMCIA_MEM_SIZE + 0x320 + 4) +#define IDE0_HCYL_REG_OFFSET (2 * PCMCIA_MEM_SIZE + 0x320 + 5) +#define IDE0_SELECT_REG_OFFSET (2 * PCMCIA_MEM_SIZE + 0x320 + 6) +#define IDE0_STATUS_REG_OFFSET (2 * PCMCIA_MEM_SIZE + 0x320 + 7) +#define IDE0_CONTROL_REG_OFFSET 0x0106 +#define IDE0_IRQ_REG_OFFSET 0x000A /* not used */ + +/* define IO_BASE for PCMCIA */ +#define _IO_BASE 0x80000000 +#define _IO_BASE_SIZE (64<<10) + +#define FEC_INTERRUPT 9 /* = SIU_LEVEL4 */ +#define PHY_INTERRUPT 12 /* = IRQ6 */ +#define IDE0_INTERRUPT 13 + +#ifdef CONFIG_IDE +#endif + +/*----------------------------------------------------------------------- + * CPM Ethernet through SCCx. + *----------------------------------------------------------------------- + * + */ + +/*** TQM823L, TQM850L ***********************************************/ + +#if defined(CONFIG_TQM823L) || defined(CONFIG_TQM850L) +/* Bits in parallel I/O port registers that have to be set/cleared + * to configure the pins for SCC1 use. + */ +#define PA_ENET_RXD ((ushort)0x0004) /* PA 13 */ +#define PA_ENET_TXD ((ushort)0x0008) /* PA 12 */ +#define PA_ENET_RCLK ((ushort)0x0100) /* PA 7 */ +#define PA_ENET_TCLK ((ushort)0x0400) /* PA 5 */ + +#define PB_ENET_TENA ((uint)0x00002000) /* PB 18 */ + +#define PC_ENET_CLSN ((ushort)0x0040) /* PC 9 */ +#define PC_ENET_RENA ((ushort)0x0080) /* PC 8 */ + +/* Control bits in the SICR to route TCLK (CLK3) and RCLK (CLK1) to + * SCC2. Also, make sure GR2 (bit 16) and SC2 (bit 17) are zero. + */ +#define SICR_ENET_MASK ((uint)0x0000ff00) +#define SICR_ENET_CLKRT ((uint)0x00002600) +#endif /* CONFIG_TQM823L, CONFIG_TQM850L */ + +/*** TQM860L ********************************************************/ + +#ifdef CONFIG_TQM860L +/* Bits in parallel I/O port registers that have to be set/cleared + * to configure the pins for SCC1 use. + */ +#define PA_ENET_RXD ((ushort)0x0001) /* PA 15 */ +#define PA_ENET_TXD ((ushort)0x0002) /* PA 14 */ +#define PA_ENET_RCLK ((ushort)0x0100) /* PA 7 */ +#define PA_ENET_TCLK ((ushort)0x0400) /* PA 5 */ + +#define PC_ENET_TENA ((ushort)0x0001) /* PC 15 */ +#define PC_ENET_CLSN ((ushort)0x0010) /* PC 11 */ +#define PC_ENET_RENA ((ushort)0x0020) /* PC 10 */ + +/* Control bits in the SICR to route TCLK (CLK3) and RCLK (CLK1) to + * SCC1. Also, make sure GR1 (bit 24) and SC1 (bit 25) are zero. + */ +#define SICR_ENET_MASK ((uint)0x000000ff) +#define SICR_ENET_CLKRT ((uint)0x00000026) +#endif /* CONFIG_TQM860L */ + +/*** FPS850L *********************************************************/ + +#ifdef CONFIG_FPS850L +/* Bits in parallel I/O port registers that have to be set/cleared + * to configure the pins for SCC1 use. + */ +#define PA_ENET_RXD ((ushort)0x0004) /* PA 13 */ +#define PA_ENET_TXD ((ushort)0x0008) /* PA 12 */ +#define PA_ENET_RCLK ((ushort)0x0100) /* PA 7 */ +#define PA_ENET_TCLK ((ushort)0x0400) /* PA 5 */ + +#define PC_ENET_TENA ((ushort)0x0002) /* PC 14 */ +#define PC_ENET_CLSN ((ushort)0x0040) /* PC 9 */ +#define PC_ENET_RENA ((ushort)0x0080) /* PC 8 */ + +/* Control bits in the SICR to route TCLK (CLK2) and RCLK (CLK4) to + * SCC2. Also, make sure GR2 (bit 16) and SC2 (bit 17) are zero. + */ +#define SICR_ENET_MASK ((uint)0x0000ff00) +#define SICR_ENET_CLKRT ((uint)0x00002600) +#endif /* CONFIG_FPS850L */ + +/*** SM850 *********************************************************/ + +/* The SM850 Service Module uses SCC2 for IrDA and SCC3 for Ethernet */ + +#ifdef CONFIG_SM850 +#define PB_ENET_RXD ((uint)0x00000004) /* PB 29 */ +#define PB_ENET_TXD ((uint)0x00000002) /* PB 30 */ +#define PA_ENET_RCLK ((ushort)0x0100) /* PA 7 */ +#define PA_ENET_TCLK ((ushort)0x0400) /* PA 5 */ + +#define PC_ENET_LBK ((ushort)0x0008) /* PC 12 */ +#define PC_ENET_TENA ((ushort)0x0004) /* PC 13 */ + +#define PC_ENET_RENA ((ushort)0x0800) /* PC 4 */ +#define PC_ENET_CLSN ((ushort)0x0400) /* PC 5 */ + +/* Control bits in the SICR to route TCLK (CLK3) and RCLK (CLK1) to + * SCC3. Also, make sure GR3 (bit 8) and SC3 (bit 9) are zero. + */ +#define SICR_ENET_MASK ((uint)0x00FF0000) +#define SICR_ENET_CLKRT ((uint)0x00260000) +#endif /* CONFIG_SM850 */ + +/* We don't use the 8259. +*/ +#define NR_8259_INTS 0 + +#endif /* !__ASSEMBLY__ */ +#endif /* __MACH_TQM8xx_H */ +#endif /* __KERNEL__ */ -- cgit v1.2.3