From 3a470247913e6537c453937720b61f4ecc3e39db Mon Sep 17 00:00:00 2001 From: Martyn Welch Date: Wed, 1 Oct 2008 09:32:39 +0100 Subject: powerpc: GE Fanuc's FPGA based PIC controller on the SBC610 Support for the SBC610 VPX Single Board Computer from GE Fanuc (PowerPC MPC8641D). A number of MPC8641D based route interrupts for on-board interrupts through a FPGA based interrupt controller, which is chained with the MPC8641D's mpic. This patch provides a basic driver to allow basic routing of interrupts to the mpic. Signed-off-by: Martyn Welch Signed-off-by: Kumar Gala --- arch/powerpc/platforms/86xx/Makefile | 2 +- arch/powerpc/platforms/86xx/gef_pic.c | 258 +++++++++++++++++++++++++++++++ arch/powerpc/platforms/86xx/gef_pic.h | 11 ++ arch/powerpc/platforms/86xx/gef_sbc610.c | 25 ++- 4 files changed, 294 insertions(+), 2 deletions(-) create mode 100644 arch/powerpc/platforms/86xx/gef_pic.c create mode 100644 arch/powerpc/platforms/86xx/gef_pic.h (limited to 'arch/powerpc/platforms') diff --git a/arch/powerpc/platforms/86xx/Makefile b/arch/powerpc/platforms/86xx/Makefile index cb9fc8f4360b..4a56ff619afd 100644 --- a/arch/powerpc/platforms/86xx/Makefile +++ b/arch/powerpc/platforms/86xx/Makefile @@ -7,4 +7,4 @@ obj-$(CONFIG_SMP) += mpc86xx_smp.o obj-$(CONFIG_MPC8641_HPCN) += mpc86xx_hpcn.o obj-$(CONFIG_SBC8641D) += sbc8641d.o obj-$(CONFIG_MPC8610_HPCD) += mpc8610_hpcd.o -obj-$(CONFIG_GEF_SBC610) += gef_sbc610.o +obj-$(CONFIG_GEF_SBC610) += gef_sbc610.o gef_pic.o diff --git a/arch/powerpc/platforms/86xx/gef_pic.c b/arch/powerpc/platforms/86xx/gef_pic.c new file mode 100644 index 000000000000..50d0a2b63809 --- /dev/null +++ b/arch/powerpc/platforms/86xx/gef_pic.c @@ -0,0 +1,258 @@ +/* + * Interrupt handling for GE Fanuc's FPGA based PIC + * + * Author: Martyn Welch + * + * 2008 (c) GE Fanuc Intelligent Platforms Embedded Systems, Inc. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +#include "gef_pic.h" + +#define DEBUG +#undef DEBUG + +#ifdef DEBUG +#define DBG(fmt...) do { printk(KERN_DEBUG "gef_pic: " fmt); } while (0) +#else +#define DBG(fmt...) do { } while (0) +#endif + +#define GEF_PIC_NUM_IRQS 32 + +/* Interrupt Controller Interface Registers */ +#define GEF_PIC_INTR_STATUS 0x0000 + +#define GEF_PIC_INTR_MASK(cpu) (0x0010 + (0x4 * cpu)) +#define GEF_PIC_CPU0_INTR_MASK GEF_PIC_INTR_MASK(0) +#define GEF_PIC_CPU1_INTR_MASK GEF_PIC_INTR_MASK(1) + +#define GEF_PIC_MCP_MASK(cpu) (0x0018 + (0x4 * cpu)) +#define GEF_PIC_CPU0_MCP_MASK GEF_PIC_MCP_MASK(0) +#define GEF_PIC_CPU1_MCP_MASK GEF_PIC_MCP_MASK(1) + +#define gef_irq_to_hw(virq) ((unsigned int)irq_map[virq].hwirq) + + +static DEFINE_SPINLOCK(gef_pic_lock); + +static void __iomem *gef_pic_irq_reg_base; +static struct irq_host *gef_pic_irq_host; +static int gef_pic_cascade_irq; + +/* + * Interrupt Controller Handling + * + * The interrupt controller handles interrupts for most on board interrupts, + * apart from PCI interrupts. For example on SBC610: + * + * 17:31 RO Reserved + * 16 RO PCI Express Doorbell 3 Status + * 15 RO PCI Express Doorbell 2 Status + * 14 RO PCI Express Doorbell 1 Status + * 13 RO PCI Express Doorbell 0 Status + * 12 RO Real Time Clock Interrupt Status + * 11 RO Temperature Interrupt Status + * 10 RO Temperature Critical Interrupt Status + * 9 RO Ethernet PHY1 Interrupt Status + * 8 RO Ethernet PHY3 Interrupt Status + * 7 RO PEX8548 Interrupt Status + * 6 RO Reserved + * 5 RO Watchdog 0 Interrupt Status + * 4 RO Watchdog 1 Interrupt Status + * 3 RO AXIS Message FIFO A Interrupt Status + * 2 RO AXIS Message FIFO B Interrupt Status + * 1 RO AXIS Message FIFO C Interrupt Status + * 0 RO AXIS Message FIFO D Interrupt Status + * + * Interrupts can be forwarded to one of two output lines. Nothing + * clever is done, so if the masks are incorrectly set, a single input + * interrupt could generate interrupts on both output lines! + * + * The dual lines are there to allow the chained interrupts to be easily + * passed into two different cores. We currently do not use this functionality + * in this driver. + * + * Controller can also be configured to generate Machine checks (MCP), again on + * two lines, to be attached to two different cores. It is suggested that these + * should be masked out. + */ + +void gef_pic_cascade(unsigned int irq, struct irq_desc *desc) +{ + unsigned int cascade_irq; + + /* + * See if we actually have an interrupt, call generic handling code if + * we do. + */ + cascade_irq = gef_pic_get_irq(); + + if (cascade_irq != NO_IRQ) + generic_handle_irq(cascade_irq); + + desc->chip->eoi(irq); + +} + +static void gef_pic_mask(unsigned int virq) +{ + unsigned long flags; + unsigned int hwirq; + u32 mask; + + hwirq = gef_irq_to_hw(virq); + + spin_lock_irqsave(&gef_pic_lock, flags); + mask = in_be32(gef_pic_irq_reg_base + GEF_PIC_INTR_MASK(0)); + mask &= ~(1 << hwirq); + out_be32(gef_pic_irq_reg_base + GEF_PIC_INTR_MASK(0), mask); + spin_unlock_irqrestore(&gef_pic_lock, flags); +} + +static void gef_pic_mask_ack(unsigned int virq) +{ + /* Don't think we actually have to do anything to ack an interrupt, + * we just need to clear down the devices interrupt and it will go away + */ + gef_pic_mask(virq); +} + +static void gef_pic_unmask(unsigned int virq) +{ + unsigned long flags; + unsigned int hwirq; + u32 mask; + + hwirq = gef_irq_to_hw(virq); + + spin_lock_irqsave(&gef_pic_lock, flags); + mask = in_be32(gef_pic_irq_reg_base + GEF_PIC_INTR_MASK(0)); + mask |= (1 << hwirq); + out_be32(gef_pic_irq_reg_base + GEF_PIC_INTR_MASK(0), mask); + spin_unlock_irqrestore(&gef_pic_lock, flags); +} + +static struct irq_chip gef_pic_chip = { + .typename = "gefp", + .mask = gef_pic_mask, + .mask_ack = gef_pic_mask_ack, + .unmask = gef_pic_unmask, +}; + + +/* When an interrupt is being configured, this call allows some flexibilty + * in deciding which irq_chip structure is used + */ +static int gef_pic_host_map(struct irq_host *h, unsigned int virq, + irq_hw_number_t hwirq) +{ + /* All interrupts are LEVEL sensitive */ + get_irq_desc(virq)->status |= IRQ_LEVEL; + set_irq_chip_and_handler(virq, &gef_pic_chip, handle_level_irq); + + return 0; +} + +static int gef_pic_host_xlate(struct irq_host *h, struct device_node *ct, + u32 *intspec, unsigned int intsize, + irq_hw_number_t *out_hwirq, unsigned int *out_flags) +{ + + *out_hwirq = intspec[0]; + if (intsize > 1) + *out_flags = intspec[1]; + else + *out_flags = IRQ_TYPE_LEVEL_HIGH; + + return 0; +} + +static struct irq_host_ops gef_pic_host_ops = { + .map = gef_pic_host_map, + .xlate = gef_pic_host_xlate, +}; + + +/* + * Initialisation of PIC, this should be called in BSP + */ +void __init gef_pic_init(struct device_node *np) +{ + unsigned long flags; + + /* Map the devices registers into memory */ + gef_pic_irq_reg_base = of_iomap(np, 0); + + spin_lock_irqsave(&gef_pic_lock, flags); + + /* Initialise everything as masked. */ + out_be32(gef_pic_irq_reg_base + GEF_PIC_CPU0_INTR_MASK, 0); + out_be32(gef_pic_irq_reg_base + GEF_PIC_CPU1_INTR_MASK, 0); + + out_be32(gef_pic_irq_reg_base + GEF_PIC_CPU0_MCP_MASK, 0); + out_be32(gef_pic_irq_reg_base + GEF_PIC_CPU1_MCP_MASK, 0); + + spin_unlock_irqrestore(&gef_pic_lock, flags); + + /* Map controller */ + gef_pic_cascade_irq = irq_of_parse_and_map(np, 0); + if (gef_pic_cascade_irq == NO_IRQ) { + printk(KERN_ERR "SBC610: failed to map cascade interrupt"); + return; + } + + /* Setup an irq_host structure */ + gef_pic_irq_host = irq_alloc_host(np, IRQ_HOST_MAP_LINEAR, + GEF_PIC_NUM_IRQS, + &gef_pic_host_ops, NO_IRQ); + if (gef_pic_irq_host == NULL) + return; + + /* Chain with parent controller */ + set_irq_chained_handler(gef_pic_cascade_irq, gef_pic_cascade); +} + +/* + * This is called when we receive an interrupt with apparently comes from this + * chip - check, returning the highest interrupt generated or return NO_IRQ + */ +unsigned int gef_pic_get_irq(void) +{ + u32 cause, mask, active; + unsigned int virq = NO_IRQ; + int hwirq; + + cause = in_be32(gef_pic_irq_reg_base + GEF_PIC_INTR_STATUS); + + mask = in_be32(gef_pic_irq_reg_base + GEF_PIC_INTR_MASK(0)); + + active = cause & mask; + + if (active) { + for (hwirq = GEF_PIC_NUM_IRQS - 1; hwirq > -1; hwirq--) { + if (active & (0x1 << hwirq)) + break; + } + virq = irq_linear_revmap(gef_pic_irq_host, + (irq_hw_number_t)hwirq); + } + + return virq; +} + diff --git a/arch/powerpc/platforms/86xx/gef_pic.h b/arch/powerpc/platforms/86xx/gef_pic.h new file mode 100644 index 000000000000..6149916da3f4 --- /dev/null +++ b/arch/powerpc/platforms/86xx/gef_pic.h @@ -0,0 +1,11 @@ +#ifndef __GEF_PIC_H__ +#define __GEF_PIC_H__ + +#include + +void gef_pic_cascade(unsigned int, struct irq_desc *); +unsigned int gef_pic_get_irq(void); +void gef_pic_init(struct device_node *); + +#endif /* __GEF_PIC_H__ */ + diff --git a/arch/powerpc/platforms/86xx/gef_sbc610.c b/arch/powerpc/platforms/86xx/gef_sbc610.c index ee215002b1cf..3873c2018cc3 100644 --- a/arch/powerpc/platforms/86xx/gef_sbc610.c +++ b/arch/powerpc/platforms/86xx/gef_sbc610.c @@ -39,6 +39,7 @@ #include #include "mpc86xx.h" +#include "gef_pic.h" #undef DEBUG @@ -48,6 +49,28 @@ #define DBG (fmt...) do { } while (0) #endif +void __iomem *sbc610_regs; + +static void __init gef_sbc610_init_irq(void) +{ + struct device_node *cascade_node = NULL; + + mpc86xx_init_irq(); + + /* + * There is a simple interrupt handler in the main FPGA, this needs + * to be cascaded into the MPIC + */ + cascade_node = of_find_compatible_node(NULL, NULL, "gef,fpga-pic"); + if (!cascade_node) { + printk(KERN_WARNING "SBC610: No FPGA PIC\n"); + return; + } + + gef_pic_init(cascade_node); + of_node_put(cascade_node); +} + static void __init gef_sbc610_setup_arch(void) { #ifdef CONFIG_PCI @@ -145,7 +168,7 @@ define_machine(gef_sbc610) { .name = "GE Fanuc SBC610", .probe = gef_sbc610_probe, .setup_arch = gef_sbc610_setup_arch, - .init_IRQ = mpc86xx_init_irq, + .init_IRQ = gef_sbc610_init_irq, .show_cpuinfo = gef_sbc610_show_cpuinfo, .get_irq = mpic_get_irq, .restart = fsl_rstcr_restart, -- cgit v1.2.3 From 4e330bcf6b323fcff0e3224c5db77cbcca83a878 Mon Sep 17 00:00:00 2001 From: Timur Tabi Date: Fri, 3 Oct 2008 11:14:10 -0500 Subject: powerpc: make Freescale QE support a selectable Kconfig option Modify the Kconfig so that Freescale QUICC Engine (QE) support is a selectable option, thereby allowing users to compile kernels without any QE support. The drawback is that QE support is now disabled by default on platforms that have a QE, and so a defconfig is needed to enable QE and QE devices (like UCC GETH). Fortunately, all the current relevant defconfigs do that already. Signed-off-by: Timur Tabi Signed-off-by: Kumar Gala --- arch/powerpc/platforms/83xx/Kconfig | 5 ----- arch/powerpc/platforms/85xx/Kconfig | 1 - arch/powerpc/platforms/Kconfig | 3 ++- 3 files changed, 2 insertions(+), 7 deletions(-) (limited to 'arch/powerpc/platforms') diff --git a/arch/powerpc/platforms/83xx/Kconfig b/arch/powerpc/platforms/83xx/Kconfig index 6159c5d4e5f1..83c664afc897 100644 --- a/arch/powerpc/platforms/83xx/Kconfig +++ b/arch/powerpc/platforms/83xx/Kconfig @@ -19,7 +19,6 @@ config MPC831x_RDB config MPC832x_MDS bool "Freescale MPC832x MDS" select DEFAULT_UIMAGE - select QUICC_ENGINE select PPC_MPC832x help This option enables support for the MPC832x MDS evaluation board. @@ -27,7 +26,6 @@ config MPC832x_MDS config MPC832x_RDB bool "Freescale MPC832x RDB" select DEFAULT_UIMAGE - select QUICC_ENGINE select PPC_MPC832x help This option enables support for the MPC8323 RDB board. @@ -57,15 +55,12 @@ config MPC834x_ITX config MPC836x_MDS bool "Freescale MPC836x MDS" select DEFAULT_UIMAGE - select QUICC_ENGINE help This option enables support for the MPC836x MDS Processor Board. config MPC836x_RDK bool "Freescale/Logic MPC836x RDK" select DEFAULT_UIMAGE - select QUICC_ENGINE - select QE_GPIO select FSL_GTM select FSL_LBC help diff --git a/arch/powerpc/platforms/85xx/Kconfig b/arch/powerpc/platforms/85xx/Kconfig index 291675b0097a..b79dc710ed34 100644 --- a/arch/powerpc/platforms/85xx/Kconfig +++ b/arch/powerpc/platforms/85xx/Kconfig @@ -33,7 +33,6 @@ config MPC85xx_CDS config MPC85xx_MDS bool "Freescale MPC85xx MDS" select DEFAULT_UIMAGE - select QUICC_ENGINE select PHYLIB help This option enables support for the MPC85xx MDS board diff --git a/arch/powerpc/platforms/Kconfig b/arch/powerpc/platforms/Kconfig index 9578c45b04fe..6cf517f5fba6 100644 --- a/arch/powerpc/platforms/Kconfig +++ b/arch/powerpc/platforms/Kconfig @@ -239,7 +239,8 @@ config TAU_AVERAGE If in doubt, say N here. config QUICC_ENGINE - bool + bool "Freescale QUICC Engine (QE) Support" + depends on FSL_SOC select PPC_LIB_RHEAP select CRC32 help -- cgit v1.2.3 From 5c091193e4a12e88930a0bb3ed3632c51e926a76 Mon Sep 17 00:00:00 2001 From: Anton Vorontsov Date: Fri, 3 Oct 2008 23:40:36 +0400 Subject: powerpc/QE: move QE_GPIO Kconfig symbol into the platforms/Kconfig Specifying user-selectable option in the qe_lib/Kconfig was a bad idea because the qe_lib/Kconfig is included into the top level Kconfig, and thus the QE_GPIO option appears at the top level menu. This patch effectively moves the QE_GPIO option under the platform menu instead. Signed-off-by: Anton Vorontsov Signed-off-by: Kumar Gala --- arch/powerpc/platforms/Kconfig | 9 +++++++++ arch/powerpc/sysdev/qe_lib/Kconfig | 9 --------- 2 files changed, 9 insertions(+), 9 deletions(-) (limited to 'arch/powerpc/platforms') diff --git a/arch/powerpc/platforms/Kconfig b/arch/powerpc/platforms/Kconfig index 6cf517f5fba6..47e956c871fe 100644 --- a/arch/powerpc/platforms/Kconfig +++ b/arch/powerpc/platforms/Kconfig @@ -249,6 +249,15 @@ config QUICC_ENGINE Selecting this option means that you wish to build a kernel for a machine with a QE coprocessor. +config QE_GPIO + bool "QE GPIO support" + depends on QUICC_ENGINE + select GENERIC_GPIO + select ARCH_REQUIRE_GPIOLIB + help + Say Y here if you're going to use hardware that connects to the + QE GPIOs. + config CPM2 bool "Enable support for the CPM2 (Communications Processor Module)" depends on MPC85xx || 8260 diff --git a/arch/powerpc/sysdev/qe_lib/Kconfig b/arch/powerpc/sysdev/qe_lib/Kconfig index 1ce546462be5..76ffbc48d4b9 100644 --- a/arch/powerpc/sysdev/qe_lib/Kconfig +++ b/arch/powerpc/sysdev/qe_lib/Kconfig @@ -24,12 +24,3 @@ config QE_USB bool help QE USB Host Controller support - -config QE_GPIO - bool "QE GPIO support" - depends on QUICC_ENGINE - select GENERIC_GPIO - select ARCH_REQUIRE_GPIOLIB - help - Say Y here if you're going to use hardware that connects to the - QE GPIOs. -- cgit v1.2.3 From 62666828bae7057835d982367e98716a1bd0fd40 Mon Sep 17 00:00:00 2001 From: Anton Vorontsov Date: Mon, 6 Oct 2008 21:08:39 +0400 Subject: powerpc/83xx: don't probe broken PCI on mpc837x_mds boards In the standalone setup the board's CPLD disables the PCI internal arbiter, thus any access to the PCI bus will hang the board. The common way to disable particular devices in the device tree is to put the "status" property with any value other than "ok" or "okay" into the device node we want to disable. So, when there is no PCI arbiter on the bus the u-boot adds status = "broken (no arbiter)" property into the PCI controller's node, and so marks the PCI controller as unavailable. Signed-off-by: Anton Vorontsov Signed-off-by: Kumar Gala --- arch/powerpc/platforms/83xx/mpc837x_mds.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) (limited to 'arch/powerpc/platforms') diff --git a/arch/powerpc/platforms/83xx/mpc837x_mds.c b/arch/powerpc/platforms/83xx/mpc837x_mds.c index be62de23bead..8bb13c807142 100644 --- a/arch/powerpc/platforms/83xx/mpc837x_mds.c +++ b/arch/powerpc/platforms/83xx/mpc837x_mds.c @@ -85,8 +85,14 @@ static void __init mpc837x_mds_setup_arch(void) ppc_md.progress("mpc837x_mds_setup_arch()", 0); #ifdef CONFIG_PCI - for_each_compatible_node(np, "pci", "fsl,mpc8349-pci") + for_each_compatible_node(np, "pci", "fsl,mpc8349-pci") { + if (!of_device_is_available(np)) { + pr_warning("%s: disabled by the firmware.\n", + np->full_name); + continue; + } mpc83xx_add_bridge(np); + } #endif mpc837xmds_usb_cfg(); } -- cgit v1.2.3 From 35225802e2e7019392fbff9227662d456eef4e24 Mon Sep 17 00:00:00 2001 From: John Rigby Date: Tue, 7 Oct 2008 15:13:18 -0600 Subject: powerpc/5121: Add PCI support. Uses mpc83xx_add_bridge in fsl_pci.c Adds second register tuple to pci node register property as done for 83xx device trees in a previous patch. Signed-off-by: John Rigby Acked-by: Grant Likely Signed-off-by: Kumar Gala --- arch/powerpc/boot/dts/mpc5121ads.dts | 3 ++- arch/powerpc/platforms/512x/Kconfig | 2 ++ arch/powerpc/platforms/512x/mpc5121_ads.c | 10 ++++++++++ arch/powerpc/sysdev/fsl_pci.c | 4 ++-- 4 files changed, 16 insertions(+), 3 deletions(-) (limited to 'arch/powerpc/platforms') diff --git a/arch/powerpc/boot/dts/mpc5121ads.dts b/arch/powerpc/boot/dts/mpc5121ads.dts index 1f9036c317b4..c2b8dbfab79e 100644 --- a/arch/powerpc/boot/dts/mpc5121ads.dts +++ b/arch/powerpc/boot/dts/mpc5121ads.dts @@ -403,7 +403,8 @@ #interrupt-cells = <1>; #size-cells = <2>; #address-cells = <3>; - reg = <0x80008500 0x100>; + reg = <0x80008500 0x100 /* internal registers */ + 0x80008300 0x8>; /* config space access registers */ compatible = "fsl,mpc5121-pci"; device_type = "pci"; }; diff --git a/arch/powerpc/platforms/512x/Kconfig b/arch/powerpc/platforms/512x/Kconfig index c62f893ede19..326852c78b8f 100644 --- a/arch/powerpc/platforms/512x/Kconfig +++ b/arch/powerpc/platforms/512x/Kconfig @@ -3,6 +3,8 @@ config PPC_MPC512x select FSL_SOC select IPIC select PPC_CLOCK + select PPC_PCI_CHOICE + select FSL_PCI if PCI config PPC_MPC5121 bool diff --git a/arch/powerpc/platforms/512x/mpc5121_ads.c b/arch/powerpc/platforms/512x/mpc5121_ads.c index 5ebf6939a697..441abc488851 100644 --- a/arch/powerpc/platforms/512x/mpc5121_ads.c +++ b/arch/powerpc/platforms/512x/mpc5121_ads.c @@ -22,16 +22,26 @@ #include #include +#include + #include "mpc512x.h" #include "mpc5121_ads.h" static void __init mpc5121_ads_setup_arch(void) { +#ifdef CONFIG_PCI + struct device_node *np; +#endif printk(KERN_INFO "MPC5121 ADS board from Freescale Semiconductor\n"); /* * cpld regs are needed early */ mpc5121_ads_cpld_map(); + +#ifdef CONFIG_PCI + for_each_compatible_node(np, "pci", "fsl,mpc5121-pci") + mpc83xx_add_bridge(np); +#endif } static void __init mpc5121_ads_init_IRQ(void) diff --git a/arch/powerpc/sysdev/fsl_pci.c b/arch/powerpc/sysdev/fsl_pci.c index a3f4abadbade..5b264eb4b1f7 100644 --- a/arch/powerpc/sysdev/fsl_pci.c +++ b/arch/powerpc/sysdev/fsl_pci.c @@ -251,7 +251,7 @@ DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8641D, quirk_fsl_pcie_header); DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8610, quirk_fsl_pcie_header); #endif /* CONFIG_PPC_85xx || CONFIG_PPC_86xx */ -#if defined(CONFIG_PPC_83xx) +#if defined(CONFIG_PPC_83xx) || defined(CONFIG_PPC_MPC512x) int __init mpc83xx_add_bridge(struct device_node *dev) { int len; @@ -310,7 +310,7 @@ int __init mpc83xx_add_bridge(struct device_node *dev) setup_indirect_pci(hose, rsrc_cfg.start, rsrc_cfg.start + 4, 0); - printk(KERN_INFO "Found MPC83xx PCI host bridge at 0x%016llx. " + printk(KERN_INFO "Found FSL PCI host bridge at 0x%016llx. " "Firmware bus number: %d->%d\n", (unsigned long long)rsrc_reg.start, hose->first_busno, hose->last_busno); -- cgit v1.2.3 From 43c9f434922ff834a6589709714f83a78c399bc1 Mon Sep 17 00:00:00 2001 From: Timur Tabi Date: Tue, 23 Sep 2008 09:47:01 -0500 Subject: powerpc: remove support for bootmem-allocated memory for the DIU driver Early versions of the Freescale DIU framebuffer driver depended on a bootmem allocation of memory for the video buffer. The need for this feature was removed in commit 6b51d51a, so now we can remove the platform-specific code that allocated that memory. Signed-off-by: Timur Tabi Signed-off-by: Kumar Gala --- arch/powerpc/platforms/86xx/mpc8610_hpcd.c | 1 - arch/powerpc/sysdev/fsl_soc.c | 38 +----------------------------- arch/powerpc/sysdev/fsl_soc.h | 8 ------- 3 files changed, 1 insertion(+), 46 deletions(-) (limited to 'arch/powerpc/platforms') diff --git a/arch/powerpc/platforms/86xx/mpc8610_hpcd.c b/arch/powerpc/platforms/86xx/mpc8610_hpcd.c index 5eedb710896e..e8d54ac5292c 100644 --- a/arch/powerpc/platforms/86xx/mpc8610_hpcd.c +++ b/arch/powerpc/platforms/86xx/mpc8610_hpcd.c @@ -238,7 +238,6 @@ static void __init mpc86xx_hpcd_setup_arch(void) } #endif #if defined(CONFIG_FB_FSL_DIU) || defined(CONFIG_FB_FSL_DIU_MODULE) - preallocate_diu_videomemory(); diu_ops.get_pixel_format = mpc8610hpcd_get_pixel_format; diu_ops.set_gamma_table = mpc8610hpcd_set_gamma_table; diu_ops.set_monitor_port = mpc8610hpcd_set_monitor_port; diff --git a/arch/powerpc/sysdev/fsl_soc.c b/arch/powerpc/sysdev/fsl_soc.c index eeb07007c753..01b884b25696 100644 --- a/arch/powerpc/sysdev/fsl_soc.c +++ b/arch/powerpc/sysdev/fsl_soc.c @@ -720,42 +720,6 @@ void fsl_rstcr_restart(char *cmd) #endif #if defined(CONFIG_FB_FSL_DIU) || defined(CONFIG_FB_FSL_DIU_MODULE) -struct platform_diu_data_ops diu_ops = { - .diu_size = 1280 * 1024 * 4, /* default one 1280x1024 buffer */ -}; +struct platform_diu_data_ops diu_ops; EXPORT_SYMBOL(diu_ops); - -int __init preallocate_diu_videomemory(void) -{ - pr_debug("diu_size=%lu\n", diu_ops.diu_size); - - diu_ops.diu_mem = __alloc_bootmem(diu_ops.diu_size, 8, 0); - if (!diu_ops.diu_mem) { - printk(KERN_ERR "fsl-diu: cannot allocate %lu bytes\n", - diu_ops.diu_size); - return -ENOMEM; - } - - pr_debug("diu_mem=%p\n", diu_ops.diu_mem); - - rh_init(&diu_ops.diu_rh_info, 4096, ARRAY_SIZE(diu_ops.diu_rh_block), - diu_ops.diu_rh_block); - return rh_attach_region(&diu_ops.diu_rh_info, - (unsigned long) diu_ops.diu_mem, - diu_ops.diu_size); -} - -static int __init early_parse_diufb(char *p) -{ - if (!p) - return 1; - - diu_ops.diu_size = _ALIGN_UP(memparse(p, &p), 8); - - pr_debug("diu_size=%lu\n", diu_ops.diu_size); - - return 0; -} -early_param("diufb", early_parse_diufb); - #endif diff --git a/arch/powerpc/sysdev/fsl_soc.h b/arch/powerpc/sysdev/fsl_soc.h index 024299887352..60f7f227327c 100644 --- a/arch/powerpc/sysdev/fsl_soc.h +++ b/arch/powerpc/sysdev/fsl_soc.h @@ -20,14 +20,7 @@ extern int fsl_spi_init(struct spi_board_info *board_infos, extern void fsl_rstcr_restart(char *cmd); #if defined(CONFIG_FB_FSL_DIU) || defined(CONFIG_FB_FSL_DIU_MODULE) -#include -#include struct platform_diu_data_ops { - rh_block_t diu_rh_block[16]; - rh_info_t diu_rh_info; - unsigned long diu_size; - void *diu_mem; - unsigned int (*get_pixel_format) (unsigned int bits_per_pixel, int monitor_port); void (*set_gamma_table) (int monitor_port, char *gamma_table_base); @@ -38,7 +31,6 @@ struct platform_diu_data_ops { }; extern struct platform_diu_data_ops diu_ops; -int __init preallocate_diu_videomemory(void); #endif #endif -- cgit v1.2.3 From 6675847ea42d5acfaa644ac24eb0d87df5769cd5 Mon Sep 17 00:00:00 2001 From: Martyn Welch Date: Mon, 13 Oct 2008 16:16:45 +0100 Subject: powerpc: FPGA support for GE Fanuc SBC610 Support for the SBC610 VPX Single Board Computer from GE Fanuc (PowerPC MPC8641D). This patch adds support for the registers held in the devices main FPGA, exposing extra information about the revision of the board through cpuinfo. Signed-off-by: Martyn Welch Signed-off-by: Kumar Gala --- arch/powerpc/boot/dts/gef_sbc610.dts | 4 ++++ arch/powerpc/platforms/86xx/gef_sbc610.c | 40 ++++++++++++++++++++++++++++++++ 2 files changed, 44 insertions(+) (limited to 'arch/powerpc/platforms') diff --git a/arch/powerpc/boot/dts/gef_sbc610.dts b/arch/powerpc/boot/dts/gef_sbc610.dts index 771a776d6101..6ed608322ddc 100644 --- a/arch/powerpc/boot/dts/gef_sbc610.dts +++ b/arch/powerpc/boot/dts/gef_sbc610.dts @@ -84,6 +84,10 @@ 6 0 0xfd000000 0x00800000 // IO FPGA (8-bit) 7 0 0xfd800000 0x00800000>; // IO FPGA (32-bit) + fpga@4,0 { + compatible = "gef,fpga-regs"; + reg = <0x4 0x0 0x40>; + }; gef_pic: pic@4,4000 { #interrupt-cells = <1>; interrupt-controller; diff --git a/arch/powerpc/platforms/86xx/gef_sbc610.c b/arch/powerpc/platforms/86xx/gef_sbc610.c index 3873c2018cc3..821c45fac18b 100644 --- a/arch/powerpc/platforms/86xx/gef_sbc610.c +++ b/arch/powerpc/platforms/86xx/gef_sbc610.c @@ -73,6 +73,7 @@ static void __init gef_sbc610_init_irq(void) static void __init gef_sbc610_setup_arch(void) { + struct device_node *regs; #ifdef CONFIG_PCI struct device_node *np; @@ -86,8 +87,43 @@ static void __init gef_sbc610_setup_arch(void) #ifdef CONFIG_SMP mpc86xx_smp_init(); #endif + + /* Remap basic board registers */ + regs = of_find_compatible_node(NULL, NULL, "gef,fpga-regs"); + if (regs) { + sbc610_regs = of_iomap(regs, 0); + if (sbc610_regs == NULL) + printk(KERN_WARNING "Unable to map board registers\n"); + of_node_put(regs); + } +} + +/* Return the PCB revision */ +static unsigned int gef_sbc610_get_pcb_rev(void) +{ + unsigned int reg; + + reg = ioread32(sbc610_regs); + return (reg >> 8) & 0xff; +} + +/* Return the board (software) revision */ +static unsigned int gef_sbc610_get_board_rev(void) +{ + unsigned int reg; + + reg = ioread32(sbc610_regs); + return (reg >> 16) & 0xff; } +/* Return the FPGA revision */ +static unsigned int gef_sbc610_get_fpga_rev(void) +{ + unsigned int reg; + + reg = ioread32(sbc610_regs); + return (reg >> 24) & 0xf; +} static void gef_sbc610_show_cpuinfo(struct seq_file *m) { @@ -96,6 +132,10 @@ static void gef_sbc610_show_cpuinfo(struct seq_file *m) seq_printf(m, "Vendor\t\t: GE Fanuc Intelligent Platforms\n"); + seq_printf(m, "Revision\t: %u%c\n", gef_sbc610_get_pcb_rev(), + ('A' + gef_sbc610_get_board_rev() - 1)); + seq_printf(m, "FPGA Revision\t: %u\n", gef_sbc610_get_fpga_rev()); + seq_printf(m, "SVR\t\t: 0x%x\n", svid); seq_printf(m, "Memory\t\t: %d MB\n", memsize / (1024 * 1024)); } -- cgit v1.2.3