From 98bbc114bfa0ea1da31e230050b437e19e49e2b3 Mon Sep 17 00:00:00 2001 From: Dave Gerlach Date: Sun, 15 Jun 2014 16:02:17 -0600 Subject: ARM: OMAP2+: hwmod: Change hardreset soc_ops for AM43XX am43xx reset register layout is more similar to am33xx than omap4 so use the am33xx functions for hwmod hardreset soc_ops rather than the currently used omap4 functions. Without this, assert_hardreset and deassert_hardreset will not work on am43xx. Signed-off-by: Dave Gerlach [paul@pwsan.com: fixed build errors for an AM43xx-only Kconfig] Signed-off-by: Paul Walmsley --- arch/arm/mach-omap2/Makefile | 6 ++++-- arch/arm/mach-omap2/cm33xx.h | 2 +- arch/arm/mach-omap2/omap_hwmod.c | 6 +++--- 3 files changed, 8 insertions(+), 6 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index 8421f38cf445..8ca99e9321e3 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -110,14 +110,16 @@ obj-y += prm_common.o cm_common.o obj-$(CONFIG_ARCH_OMAP2) += prm2xxx_3xxx.o prm2xxx.o cm2xxx.o obj-$(CONFIG_ARCH_OMAP3) += prm2xxx_3xxx.o prm3xxx.o cm3xxx.o obj-$(CONFIG_ARCH_OMAP3) += vc3xxx_data.o vp3xxx_data.o -obj-$(CONFIG_SOC_AM33XX) += prm33xx.o cm33xx.o omap-prcm-4-5-common = cminst44xx.o cm44xx.o prm44xx.o \ prcm_mpu44xx.o prminst44xx.o \ vc44xx_data.o vp44xx_data.o obj-$(CONFIG_ARCH_OMAP4) += $(omap-prcm-4-5-common) obj-$(CONFIG_SOC_OMAP5) += $(omap-prcm-4-5-common) obj-$(CONFIG_SOC_DRA7XX) += $(omap-prcm-4-5-common) -obj-$(CONFIG_SOC_AM43XX) += $(omap-prcm-4-5-common) +am33xx-43xx-prcm-common += prm33xx.o cm33xx.o +obj-$(CONFIG_SOC_AM33XX) += $(am33xx-43xx-prcm-common) +obj-$(CONFIG_SOC_AM43XX) += $(omap-prcm-4-5-common) \ + $(am33xx-43xx-prcm-common) # OMAP voltage domains voltagedomain-common := voltage.o vc.o vp.o diff --git a/arch/arm/mach-omap2/cm33xx.h b/arch/arm/mach-omap2/cm33xx.h index 15a778ce7707..bd2441790779 100644 --- a/arch/arm/mach-omap2/cm33xx.h +++ b/arch/arm/mach-omap2/cm33xx.h @@ -380,7 +380,7 @@ void am33xx_cm_clkdm_disable_hwsup(u16 inst, u16 cdoffs); void am33xx_cm_clkdm_force_sleep(u16 inst, u16 cdoffs); void am33xx_cm_clkdm_force_wakeup(u16 inst, u16 cdoffs); -#ifdef CONFIG_SOC_AM33XX +#if defined(CONFIG_SOC_AM33XX) || defined(CONFIG_SOC_AM43XX) extern int am33xx_cm_wait_module_idle(u16 inst, s16 cdoffs, u16 clkctrl_offs); extern void am33xx_cm_module_enable(u8 mode, u16 inst, s16 cdoffs, diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index f7bb435bb543..6c074f37cdd2 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -4251,9 +4251,9 @@ void __init omap_hwmod_init(void) soc_ops.enable_module = _omap4_enable_module; soc_ops.disable_module = _omap4_disable_module; soc_ops.wait_target_ready = _omap4_wait_target_ready; - soc_ops.assert_hardreset = _omap4_assert_hardreset; - soc_ops.deassert_hardreset = _omap4_deassert_hardreset; - soc_ops.is_hardreset_asserted = _omap4_is_hardreset_asserted; + soc_ops.assert_hardreset = _am33xx_assert_hardreset; + soc_ops.deassert_hardreset = _am33xx_deassert_hardreset; + soc_ops.is_hardreset_asserted = _am33xx_is_hardreset_asserted; soc_ops.init_clkdm = _init_clkdm; } else if (soc_is_am33xx()) { soc_ops.enable_module = _am33xx_enable_module; -- cgit v1.2.3 From bf32c4ad9924e2d60a23de4a3c074f806bf2ef05 Mon Sep 17 00:00:00 2001 From: Keshava Munegowda Date: Sun, 15 Jun 2014 16:02:18 -0600 Subject: ARM: OMAP5: hwmod: Add ocp2scp3 and sata hwmods Create hwmods for ocp2scp3 and sata modules. [Roger Q] Clean up. CC: Benoit Cousson Signed-off-by: Balaji T K Signed-off-by: Roger Quadros Signed-off-by: Paul Walmsley --- arch/arm/mach-omap2/omap_hwmod_54xx_data.c | 73 ++++++++++++++++++++++++++++++ 1 file changed, 73 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/mach-omap2/omap_hwmod_54xx_data.c b/arch/arm/mach-omap2/omap_hwmod_54xx_data.c index 290213f2cbe3..1103aa0e0d29 100644 --- a/arch/arm/mach-omap2/omap_hwmod_54xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_54xx_data.c @@ -2020,6 +2020,77 @@ static struct omap_hwmod omap54xx_wd_timer2_hwmod = { }, }; +/* + * 'ocp2scp' class + * bridge to transform ocp interface protocol to scp (serial control port) + * protocol + */ +/* ocp2scp3 */ +static struct omap_hwmod omap54xx_ocp2scp3_hwmod; +/* l4_cfg -> ocp2scp3 */ +static struct omap_hwmod_ocp_if omap54xx_l4_cfg__ocp2scp3 = { + .master = &omap54xx_l4_cfg_hwmod, + .slave = &omap54xx_ocp2scp3_hwmod, + .clk = "l4_root_clk_div", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +static struct omap_hwmod omap54xx_ocp2scp3_hwmod = { + .name = "ocp2scp3", + .class = &omap54xx_ocp2scp_hwmod_class, + .clkdm_name = "l3init_clkdm", + .prcm = { + .omap4 = { + .clkctrl_offs = OMAP54XX_CM_L3INIT_OCP2SCP3_CLKCTRL_OFFSET, + .context_offs = OMAP54XX_RM_L3INIT_OCP2SCP3_CONTEXT_OFFSET, + .modulemode = MODULEMODE_HWCTRL, + }, + }, +}; + +/* + * 'sata' class + * sata: serial ata interface gen2 compliant ( 1 rx/ 1 tx) + */ + +static struct omap_hwmod_class_sysconfig omap54xx_sata_sysc = { + .sysc_offs = 0x0000, + .sysc_flags = (SYSC_HAS_MIDLEMODE | SYSC_HAS_SIDLEMODE), + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | + SIDLE_SMART_WKUP | MSTANDBY_FORCE | MSTANDBY_NO | + MSTANDBY_SMART | MSTANDBY_SMART_WKUP), + .sysc_fields = &omap_hwmod_sysc_type2, +}; + +static struct omap_hwmod_class omap54xx_sata_hwmod_class = { + .name = "sata", + .sysc = &omap54xx_sata_sysc, +}; + +/* sata */ +static struct omap_hwmod omap54xx_sata_hwmod = { + .name = "sata", + .class = &omap54xx_sata_hwmod_class, + .clkdm_name = "l3init_clkdm", + .flags = HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY, + .main_clk = "func_48m_fclk", + .mpu_rt_idx = 1, + .prcm = { + .omap4 = { + .clkctrl_offs = OMAP54XX_CM_L3INIT_SATA_CLKCTRL_OFFSET, + .context_offs = OMAP54XX_RM_L3INIT_SATA_CONTEXT_OFFSET, + .modulemode = MODULEMODE_SWCTRL, + }, + }, +}; + +/* l4_cfg -> sata */ +static struct omap_hwmod_ocp_if omap54xx_l4_cfg__sata = { + .master = &omap54xx_l4_cfg_hwmod, + .slave = &omap54xx_sata_hwmod, + .clk = "l3_iclk_div", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; /* * Interfaces @@ -2765,6 +2836,8 @@ static struct omap_hwmod_ocp_if *omap54xx_hwmod_ocp_ifs[] __initdata = { &omap54xx_l4_cfg__usb_tll_hs, &omap54xx_l4_cfg__usb_otg_ss, &omap54xx_l4_wkup__wd_timer2, + &omap54xx_l4_cfg__ocp2scp3, + &omap54xx_l4_cfg__sata, NULL, }; -- cgit v1.2.3 From 9188883fd66e9809e93e06d5bbd49cf99a6cdbee Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Mon, 16 Jun 2014 01:10:22 -0700 Subject: ARM: dts: Enable twl4030 off-idle configuration for selected omaps N900 now seems to shut down the external oscillator when hitting off-idle. And Beagle XM seems to have OSC_EN pin connected to allow shutting down the oscillator looking at the schematics. The oscillator output is cut off in off-idle and you can monitor it from R56 on the bottom side of the board near the power jack. Note that for beagle we need to also enable the UART wake-up event, the others have that enabled in earlier patches. OMAP37XX EVM (TMDSEVM3730) does not seem to have twl4030 clken pin connected, so there is no point trying to enable shutting down of the oscillator on it for the extra latency it adds. Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/omap3-beagle-xm.dts | 6 ++++++ arch/arm/boot/dts/omap3-evm-common.dtsi | 7 +++++++ arch/arm/boot/dts/omap3-n900.dts | 5 +++++ 3 files changed, 18 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/omap3-beagle-xm.dts b/arch/arm/boot/dts/omap3-beagle-xm.dts index cf0be662297e..1becefce821b 100644 --- a/arch/arm/boot/dts/omap3-beagle-xm.dts +++ b/arch/arm/boot/dts/omap3-beagle-xm.dts @@ -251,6 +251,11 @@ codec { }; }; + + twl_power: power { + compatible = "ti,twl4030-power-beagleboard-xm", "ti,twl4030-power-idle-osc-off"; + ti,use_poweroff; + }; }; }; @@ -301,6 +306,7 @@ }; &uart3 { + interrupts-extended = <&intc 74 &omap3_pmx_core OMAP3_UART3_RX>; pinctrl-names = "default"; pinctrl-0 = <&uart3_pins>; }; diff --git a/arch/arm/boot/dts/omap3-evm-common.dtsi b/arch/arm/boot/dts/omap3-evm-common.dtsi index 8ae8f007c8ad..c8747c7f1cc8 100644 --- a/arch/arm/boot/dts/omap3-evm-common.dtsi +++ b/arch/arm/boot/dts/omap3-evm-common.dtsi @@ -50,6 +50,13 @@ gpios = <&twl_gpio 18 GPIO_ACTIVE_LOW>; }; +&twl { + twl_power: power { + compatible = "ti,twl4030-power-omap3-evm", "ti,twl4030-power-idle"; + ti,use_poweroff; + }; +}; + &i2c2 { clock-frequency = <400000>; }; diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts index ae8ae3f4f9bf..1fe45d1f75ec 100644 --- a/arch/arm/boot/dts/omap3-n900.dts +++ b/arch/arm/boot/dts/omap3-n900.dts @@ -351,6 +351,11 @@ compatible = "ti,twl4030-audio"; ti,enable-vibra = <1>; }; + + twl_power: power { + compatible = "ti,twl4030-power-n900", "ti,twl4030-power-idle-osc-off"; + ti,use_poweroff; + }; }; &twl_keypad { -- cgit v1.2.3 From 73d202807a1ca7225d7b79d5e403cc48bf0adfdc Mon Sep 17 00:00:00 2001 From: Nishanth Menon Date: Thu, 29 May 2014 14:05:50 -0500 Subject: ARM: DRA722: add detection of SoC information Add support for DRA72x device DIEID. Currently these devices are reported as DRA75/74 family of processors. Signed-off-by: Nishanth Menon Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/id.c | 12 ++++++++++++ arch/arm/mach-omap2/soc.h | 1 + 2 files changed, 13 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c index 43969da5d50b..d42022f2a71e 100644 --- a/arch/arm/mach-omap2/id.c +++ b/arch/arm/mach-omap2/id.c @@ -649,6 +649,18 @@ void __init dra7xxx_check_revision(void) } break; + case 0xb9bc: + switch (rev) { + case 0: + omap_revision = DRA722_REV_ES1_0; + break; + default: + /* If we have no new revisions */ + omap_revision = DRA722_REV_ES1_0; + break; + } + break; + default: /* Unknown default to latest silicon rev as default*/ pr_warn("%s: unknown idcode=0x%08x (hawkeye=0x%08x,rev=0x%d)\n", diff --git a/arch/arm/mach-omap2/soc.h b/arch/arm/mach-omap2/soc.h index de2a34c423a7..01ca8086fb6c 100644 --- a/arch/arm/mach-omap2/soc.h +++ b/arch/arm/mach-omap2/soc.h @@ -462,6 +462,7 @@ IS_OMAP_TYPE(3430, 0x3430) #define DRA7XX_CLASS 0x07000000 #define DRA752_REV_ES1_0 (DRA7XX_CLASS | (0x52 << 16) | (0x10 << 8)) #define DRA752_REV_ES1_1 (DRA7XX_CLASS | (0x52 << 16) | (0x11 << 8)) +#define DRA722_REV_ES1_0 (DRA7XX_CLASS | (0x22 << 16) | (0x10 << 8)) void omap2xxx_check_revision(void); void omap3xxx_check_revision(void); -- cgit v1.2.3 From 05e7d1a57a268b491d0e24952d219a73c62bd3df Mon Sep 17 00:00:00 2001 From: Nishanth Menon Date: Thu, 5 Jun 2014 20:09:46 -0500 Subject: ARM: dts: omap5: Update CPU OPP table as per final production Manual As per the Final production Data Manual for OMAP5432, SWPS050F(APRIL 2014) There are only two OPPs - 1GHz and 1.5GHz. the older OPP_LOW has been completely descoped. The Nominal voltages are still correct though. However, expectation for final production configuration is operation with Adaptive Body Bias (ABB) and Adaptive Voltage Scaling Class 0 operation. There are no IDcode or version change information encoded to programmatically detect this and software is supposed to NOT use OPP_LOW(500MHz) anymore for all devices (legacy and production samples). Signed-off-by: Nishanth Menon Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/omap5.dtsi | 1 - 1 file changed, 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi index 3bfda16c8b52..a4ed54988866 100644 --- a/arch/arm/boot/dts/omap5.dtsi +++ b/arch/arm/boot/dts/omap5.dtsi @@ -45,7 +45,6 @@ operating-points = < /* kHz uV */ - 500000 880000 1000000 1060000 1500000 1250000 >; -- cgit v1.2.3 From fe797553e7f1acbce807e2ee3d86ca01c0e28b92 Mon Sep 17 00:00:00 2001 From: George Cherian Date: Fri, 6 Jun 2014 11:47:34 +0530 Subject: ARM: dts: am43x-epos-evm: Add Missing cpsw-phy-sel for am43x-epos-evm AM437x EPOS evm use external clock for RMII interface. Enable the same in DT. Signed-off-by: George Cherian Reported-by: Nishanth Menon Tested-by: Nishanth Menon Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/am43x-epos-evm.dts | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/am43x-epos-evm.dts b/arch/arm/boot/dts/am43x-epos-evm.dts index 19f1f7e87597..90098f98a5c8 100644 --- a/arch/arm/boot/dts/am43x-epos-evm.dts +++ b/arch/arm/boot/dts/am43x-epos-evm.dts @@ -319,6 +319,10 @@ phy-mode = "rmii"; }; +&phy_sel { + rmii-clock-ext; +}; + &i2c0 { status = "okay"; pinctrl-names = "default"; -- cgit v1.2.3 From b7196ab07890bb1bc8f364dc341ee1251919111b Mon Sep 17 00:00:00 2001 From: Brian Norris Date: Tue, 10 Jun 2014 14:26:36 -0700 Subject: ARM: OMAP2+: drop unused function gic_init_irq() is no longer used as of: commit b42b918194c4791510ac049e3d507169a7de8544 Author: Tony Lindgren Date: Thu May 30 12:53:05 2013 -0700 ARM: OMAP2+: Remove board-omap4panda.c Drop it. Signed-off-by: Brian Norris Cc: Tony Lindgren Cc: linux-arm-kernel@lists.infradead.org Cc: linux-omap@vger.kernel.org Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/common.h | 1 - arch/arm/mach-omap2/omap4-common.c | 20 -------------------- 2 files changed, 21 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h index ff029737c8f0..51f6897418b7 100644 --- a/arch/arm/mach-omap2/common.h +++ b/arch/arm/mach-omap2/common.h @@ -241,7 +241,6 @@ static inline void __iomem *omap4_get_scu_base(void) } #endif -extern void __init gic_init_irq(void); extern void gic_dist_disable(void); extern void gic_dist_enable(void); extern bool gic_dist_disabled(void); diff --git a/arch/arm/mach-omap2/omap4-common.c b/arch/arm/mach-omap2/omap4-common.c index 326cd982a3cb..539e8106eb96 100644 --- a/arch/arm/mach-omap2/omap4-common.c +++ b/arch/arm/mach-omap2/omap4-common.c @@ -102,26 +102,6 @@ void __init omap_barriers_init(void) {} #endif -void __init gic_init_irq(void) -{ - void __iomem *omap_irq_base; - - /* Static mapping, never released */ - gic_dist_base_addr = ioremap(OMAP44XX_GIC_DIST_BASE, SZ_4K); - BUG_ON(!gic_dist_base_addr); - - twd_base = ioremap(OMAP44XX_LOCAL_TWD_BASE, SZ_4K); - BUG_ON(!twd_base); - - /* Static mapping, never released */ - omap_irq_base = ioremap(OMAP44XX_GIC_CPU_BASE, SZ_512); - BUG_ON(!omap_irq_base); - - omap_wakeupgen_init(); - - gic_init(0, 29, gic_dist_base_addr, omap_irq_base); -} - void gic_dist_disable(void) { if (gic_dist_base_addr) -- cgit v1.2.3 From 2ca0945fc103bac7e6469682b8e012d6bff5b9c4 Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Wed, 7 May 2014 13:20:48 +0300 Subject: ARM: DTS: dra7/dra7xx-clocks: ATL related changes Modify the clock nodes for the ATL clocks to use the ATL clock driver to handle them. Add the ATL device node at the same time for DRA7. Signed-off-by: Peter Ujfalusi Acked-by: Tero Kristo Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/dra7.dtsi | 11 +++++++++++ arch/arm/boot/dts/dra7xx-clocks.dtsi | 16 ++++++++-------- 2 files changed, 19 insertions(+), 8 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi index c29945e07c5a..dca96b9509c4 100644 --- a/arch/arm/boot/dts/dra7.dtsi +++ b/arch/arm/boot/dts/dra7.dtsi @@ -984,6 +984,17 @@ #size-cells = <1>; status = "disabled"; }; + + atl: atl@4843c000 { + compatible = "ti,dra7-atl"; + reg = <0x4843c000 0x3ff>; + ti,hwmods = "atl"; + ti,provided-clocks = <&atl_clkin0_ck>, <&atl_clkin1_ck>, + <&atl_clkin2_ck>, <&atl_clkin3_ck>; + clocks = <&atl_gfclk_mux>; + clock-names = "fck"; + status = "disabled"; + }; }; }; diff --git a/arch/arm/boot/dts/dra7xx-clocks.dtsi b/arch/arm/boot/dts/dra7xx-clocks.dtsi index b03cfe49d22b..c90c76de84d6 100644 --- a/arch/arm/boot/dts/dra7xx-clocks.dtsi +++ b/arch/arm/boot/dts/dra7xx-clocks.dtsi @@ -10,26 +10,26 @@ &cm_core_aon_clocks { atl_clkin0_ck: atl_clkin0_ck { #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <0>; + compatible = "ti,dra7-atl-clock"; + clocks = <&atl_gfclk_mux>; }; atl_clkin1_ck: atl_clkin1_ck { #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <0>; + compatible = "ti,dra7-atl-clock"; + clocks = <&atl_gfclk_mux>; }; atl_clkin2_ck: atl_clkin2_ck { #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <0>; + compatible = "ti,dra7-atl-clock"; + clocks = <&atl_gfclk_mux>; }; atl_clkin3_ck: atl_clkin3_ck { #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <0>; + compatible = "ti,dra7-atl-clock"; + clocks = <&atl_gfclk_mux>; }; hdmi_clkin_ck: hdmi_clkin_ck { -- cgit v1.2.3 From c021f241f4fab2bb4fc4120a38a828a03dd3f970 Mon Sep 17 00:00:00 2001 From: "David R. Piegdon" Date: Mon, 16 Jun 2014 23:42:51 +0000 Subject: ARM: OMAP2+: Fix parser-bug in platform muxing code Fix a parser-bug in the omap2 muxing code where muxtable-entries will be wrongly selected if the requested muxname is a *prefix* of their m0-entry and they have a matching mN-entry. Fix by additionally checking that the length of the m0_entry is equal. For example muxing of "dss_data2.dss_data2" on omap32xx will fail because the prefix "dss_data2" will match the mux-entries "dss_data2" as well as "dss_data20", with the suffix "dss_data2" matching m0 (for dss_data2) and m4 (for dss_data20). Thus both are recognized as signal path candidates: Relevant muxentries from mux34xx.c: _OMAP3_MUXENTRY(DSS_DATA20, 90, "dss_data20", NULL, "mcspi3_somi", "dss_data2", "gpio_90", NULL, NULL, "safe_mode"), _OMAP3_MUXENTRY(DSS_DATA2, 72, "dss_data2", NULL, NULL, NULL, "gpio_72", NULL, NULL, "safe_mode"), This will result in a failure to mux the pin at all: _omap_mux_get_by_name: Multiple signal paths (2) for dss_data2.dss_data2 Patch should apply to linus' latest master down to rather old linux-2.6 trees. Signed-off-by: David R. Piegdon Cc: stable@vger.kernel.org [tony@atomide.com: updated description to include full description] Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/mux.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c index fd88edeb027f..f62f7537d899 100644 --- a/arch/arm/mach-omap2/mux.c +++ b/arch/arm/mach-omap2/mux.c @@ -183,8 +183,10 @@ static int __init _omap_mux_get_by_name(struct omap_mux_partition *partition, m0_entry = mux->muxnames[0]; /* First check for full name in mode0.muxmode format */ - if (mode0_len && strncmp(muxname, m0_entry, mode0_len)) - continue; + if (mode0_len) + if (strncmp(muxname, m0_entry, mode0_len) || + (strlen(m0_entry) != mode0_len)) + continue; /* Then check for muxmode only */ for (i = 0; i < OMAP_MUX_NR_MODES; i++) { -- cgit v1.2.3 From edc56f871eefbc56baf1fd981eeff35ef447925c Mon Sep 17 00:00:00 2001 From: Sourav Poddar Date: Tue, 17 Jun 2014 12:29:21 +0530 Subject: ARM: dts: dra7-evm: remove interrupt binding The qspi node defines crossbar number as its interrupt number. But, the crossbar dts patches are not yet there, this causes a warning during boot. So interrupts = < > property should be removed from DT and added later by crossbar series. Reported-by: Sricharan R Signed-off-by: Sourav Poddar Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/dra7.dtsi | 1 - 1 file changed, 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi index dca96b9509c4..80127638b379 100644 --- a/arch/arm/boot/dts/dra7.dtsi +++ b/arch/arm/boot/dts/dra7.dtsi @@ -773,7 +773,6 @@ clocks = <&qspi_gfclk_div>; clock-names = "fck"; num-cs = <4>; - interrupts = <0 343 0x4>; status = "disabled"; }; -- cgit v1.2.3 From bfda90cbb8933aa280b22e8ae087e2a850a01288 Mon Sep 17 00:00:00 2001 From: Olof Johansson Date: Thu, 26 Jun 2014 23:10:55 -0700 Subject: ARM: bcm: Fix bcm and multi_v7 defconfigs BCM (Kona/capri platform) has regressed in two ways on this release. First, bcm_defconfig no longer selected the appropriate MMC driver options due to changes in dependencies. Secondly, the new MFD and regulator drivers were not enabled on multi_v7_defconfig, so that caused the system to fail probing MMC there. Fix by enabling the new options as needed. Cc: Matt Porter Cc: Christian Daudt Signed-off-by: Olof Johansson --- arch/arm/configs/bcm_defconfig | 2 +- arch/arm/configs/multi_v7_defconfig | 3 ++- 2 files changed, 3 insertions(+), 2 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/configs/bcm_defconfig b/arch/arm/configs/bcm_defconfig index 9d13dae99125..4bf72264b175 100644 --- a/arch/arm/configs/bcm_defconfig +++ b/arch/arm/configs/bcm_defconfig @@ -94,10 +94,10 @@ CONFIG_BACKLIGHT_CLASS_DEVICE=y CONFIG_BACKLIGHT_PWM=y # CONFIG_USB_SUPPORT is not set CONFIG_MMC=y -CONFIG_MMC_UNSAFE_RESUME=y CONFIG_MMC_BLOCK_MINORS=32 CONFIG_MMC_TEST=y CONFIG_MMC_SDHCI=y +CONFIG_MMC_SDHCI_PLTFM=y CONFIG_MMC_SDHCI_BCM_KONA=y CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig index be1a3455a9fe..534836497998 100644 --- a/arch/arm/configs/multi_v7_defconfig +++ b/arch/arm/configs/multi_v7_defconfig @@ -223,12 +223,12 @@ CONFIG_POWER_RESET_GPIO=y CONFIG_POWER_RESET_SUN6I=y CONFIG_SENSORS_LM90=y CONFIG_THERMAL=y -CONFIG_DOVE_THERMAL=y CONFIG_ARMADA_THERMAL=y CONFIG_WATCHDOG=y CONFIG_ORION_WATCHDOG=y CONFIG_SUNXI_WATCHDOG=y CONFIG_MFD_AS3722=y +CONFIG_MFD_BCM590XX=y CONFIG_MFD_CROS_EC=y CONFIG_MFD_CROS_EC_SPI=y CONFIG_MFD_MAX8907=y @@ -240,6 +240,7 @@ CONFIG_MFD_TPS65910=y CONFIG_REGULATOR_VIRTUAL_CONSUMER=y CONFIG_REGULATOR_AB8500=y CONFIG_REGULATOR_AS3722=y +CONFIG_REGULATOR_BCM590XX=y CONFIG_REGULATOR_GPIO=y CONFIG_REGULATOR_MAX8907=y CONFIG_REGULATOR_PALMAS=y -- cgit v1.2.3 From 98ea2dba65932ffc456b6d7b11b8a0624e2f7b95 Mon Sep 17 00:00:00 2001 From: Thomas Petazzoni Date: Fri, 13 Jun 2014 10:58:38 +0100 Subject: ARM: 8076/1: mm: add support for HW coherent systems in PL310 cache When a PL310 cache is used on a system that provides hardware coherency, the outer cache sync operation is useless, and can be skipped. Moreover, on some systems, it is harmful as it causes deadlocks between the Marvell coherency mechanism, the Marvell PCIe controller and the Cortex-A9. To avoid this, this commit introduces a new Device Tree property 'arm,io-coherent' for the L2 cache controller node, valid only for the PL310 cache. It identifies the usage of the PL310 cache in an I/O coherent configuration. Internally, it makes the driver disable the outer cache sync operation. Note that technically speaking, a fully coherent system wouldn't require any of the other .outer_cache operations. However, in practice, when booting secondary CPUs, these are not yet coherent, and therefore a set of cache maintenance operations are necessary at this point. This explains why we keep the other .outer_cache operations and only ->sync is disabled. While in theory any write to a PL310 register could cause the deadlock, in practice, disabling ->sync is sufficient to workaround the deadlock, since the other cache maintenance operations are only used in very specific situations. Contrary to previous versions of this patch, this new version does not simply NULL-ify the ->sync member, because the l2c_init_data structures are now 'const' and therefore cannot be modified, which is a good thing. Therefore, this patch introduces a separate l2c_init_data instance, called of_l2c310_coherent_data. Signed-off-by: Thomas Petazzoni Signed-off-by: Russell King --- Documentation/devicetree/bindings/arm/l2cc.txt | 3 +++ arch/arm/mm/cache-l2x0.c | 31 ++++++++++++++++++++++++++ 2 files changed, 34 insertions(+) (limited to 'arch/arm') diff --git a/Documentation/devicetree/bindings/arm/l2cc.txt b/Documentation/devicetree/bindings/arm/l2cc.txt index b513cb8196fe..af527ee111c2 100644 --- a/Documentation/devicetree/bindings/arm/l2cc.txt +++ b/Documentation/devicetree/bindings/arm/l2cc.txt @@ -40,6 +40,9 @@ Optional properties: - arm,filter-ranges : Starting address and length of window to filter. Addresses in the filter window are directed to the M1 port. Other addresses will go to the M0 port. +- arm,io-coherent : indicates that the system is operating in an hardware + I/O coherent mode. Valid only when the arm,pl310-cache compatible + string is used. - interrupts : 1 combined interrupt. - cache-id-part: cache id part number to be used if it is not present on hardware diff --git a/arch/arm/mm/cache-l2x0.c b/arch/arm/mm/cache-l2x0.c index efc5cabf70e0..076172b69422 100644 --- a/arch/arm/mm/cache-l2x0.c +++ b/arch/arm/mm/cache-l2x0.c @@ -1068,6 +1068,33 @@ static const struct l2c_init_data of_l2c310_data __initconst = { }, }; +/* + * This is a variant of the of_l2c310_data with .sync set to + * NULL. Outer sync operations are not needed when the system is I/O + * coherent, and potentially harmful in certain situations (PCIe/PL310 + * deadlock on Armada 375/38x due to hardware I/O coherency). The + * other operations are kept because they are infrequent (therefore do + * not cause the deadlock in practice) and needed for secondary CPU + * boot and other power management activities. + */ +static const struct l2c_init_data of_l2c310_coherent_data __initconst = { + .type = "L2C-310 Coherent", + .way_size_0 = SZ_8K, + .num_lock = 8, + .of_parse = l2c310_of_parse, + .enable = l2c310_enable, + .fixup = l2c310_fixup, + .save = l2c310_save, + .outer_cache = { + .inv_range = l2c210_inv_range, + .clean_range = l2c210_clean_range, + .flush_range = l2c210_flush_range, + .flush_all = l2c210_flush_all, + .disable = l2c310_disable, + .resume = l2c310_resume, + }, +}; + /* * Note that the end addresses passed to Linux primitives are * noninclusive, while the hardware cache range operations use @@ -1487,6 +1514,10 @@ int __init l2x0_of_init(u32 aux_val, u32 aux_mask) data = of_match_node(l2x0_ids, np)->data; + if (of_device_is_compatible(np, "arm,pl310-cache") && + of_property_read_bool(np, "arm,io-coherent")) + data = &of_l2c310_coherent_data; + old_aux = readl_relaxed(l2x0_base + L2X0_AUX_CTRL); if (old_aux != ((old_aux & aux_mask) | aux_val)) { pr_warn("L2C: platform modifies aux control register: 0x%08x -> 0x%08x\n", -- cgit v1.2.3 From d0ba7cc02cc20a3ae6ad60b842c5e786f584bb47 Mon Sep 17 00:00:00 2001 From: Nicolas Pitre Date: Thu, 19 Jun 2014 22:57:01 +0100 Subject: ARM: 8080/1: mcpm.h: remove unused variable declaration The sync_phys variable has been replaced by link time computation in mcpm_head.S before the code was submitted upstream. Signed-off-by: Nicolas Pitre Signed-off-by: Russell King --- arch/arm/include/asm/mcpm.h | 2 -- 1 file changed, 2 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/include/asm/mcpm.h b/arch/arm/include/asm/mcpm.h index d9702eb0b02b..94060adba174 100644 --- a/arch/arm/include/asm/mcpm.h +++ b/arch/arm/include/asm/mcpm.h @@ -208,8 +208,6 @@ struct sync_struct { struct mcpm_sync_struct clusters[MAX_NR_CLUSTERS]; }; -extern unsigned long sync_phys; /* physical address of *mcpm_sync */ - void __mcpm_cpu_going_down(unsigned int cpu, unsigned int cluster); void __mcpm_cpu_down(unsigned int cpu, unsigned int cluster); void __mcpm_outbound_leave_critical(unsigned int cluster, int state); -- cgit v1.2.3 From 92183103d87dfa929696187e4ed6be67f56a2f3a Mon Sep 17 00:00:00 2001 From: Andrea Adami Date: Wed, 25 Jun 2014 22:31:15 +0100 Subject: ARM: 8084/1: sa1100: collie: revert back to cfi_probe Reverts commit d26b17edafc45187c30cae134a5e5429d58ad676 ARM: sa1100: collie.c: fall back to jedec_probe flash detection Unfortunately the detection was challenged on the defective unit used for tests: one of the NOR chips did not respond to the CFI query. Moreover that bad device needed extra delays on erase-suspend/resume cycles. Tested personally on 3 different units and with feedback of two other users. Signed-off-by: Andrea Adami Signed-off-by: Russell King --- arch/arm/mach-sa1100/collie.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-sa1100/collie.c b/arch/arm/mach-sa1100/collie.c index f9874ba60cc8..f26aeeab9e14 100644 --- a/arch/arm/mach-sa1100/collie.c +++ b/arch/arm/mach-sa1100/collie.c @@ -356,7 +356,7 @@ static void collie_flash_exit(void) } static struct flash_platform_data collie_flash_data = { - .map_name = "jedec_probe", + .map_name = "cfi_probe", .init = collie_flash_init, .set_vpp = collie_set_vpp, .exit = collie_flash_exit, -- cgit v1.2.3 From 3abe742339567ac5d63c520834826aacd9b5d5f6 Mon Sep 17 00:00:00 2001 From: Andrea Adami Date: Wed, 25 Jun 2014 22:32:26 +0100 Subject: ARM: 8085/1: sa1100: collie: add top boot mtd partition The CFI mapping is now perfect so we can expose the top block, read only. There isn't much to read, though, just the sharpsl_params values. Signed-off-by: Andrea Adami Signed-off-by: Russell King --- arch/arm/mach-sa1100/collie.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/mach-sa1100/collie.c b/arch/arm/mach-sa1100/collie.c index f26aeeab9e14..108939f8d053 100644 --- a/arch/arm/mach-sa1100/collie.c +++ b/arch/arm/mach-sa1100/collie.c @@ -329,6 +329,11 @@ static struct mtd_partition collie_partitions[] = { .name = "rootfs", .offset = MTDPART_OFS_APPEND, .size = 0x00e20000, + }, { + .name = "bootblock", + .offset = MTDPART_OFS_APPEND, + .size = 0x00020000, + .mask_flags = MTD_WRITEABLE } }; -- cgit v1.2.3 From 6980c3e2514e5ae36b43ec8302f4920d6e3c9434 Mon Sep 17 00:00:00 2001 From: Laura Abbott Date: Fri, 27 Jun 2014 10:17:27 +0100 Subject: ARM: 8086/1: Set memblock limit for nommu Commit 1c2f87c (ARM: 8025/1: Get rid of meminfo) changed find_limits to use memblock_get_current_limit for calculating the max_low pfn. nommu targets never actually set a limit on memblock though which means memblock_get_current_limit will just return the default value. Set the memblock_limit to be the end of DDR to make sure bounds are calculated correctly. Signed-off-by: Laura Abbott Signed-off-by: Russell King --- arch/arm/mm/nommu.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/arm') diff --git a/arch/arm/mm/nommu.c b/arch/arm/mm/nommu.c index da1874f9f8cf..a014dfacd5ca 100644 --- a/arch/arm/mm/nommu.c +++ b/arch/arm/mm/nommu.c @@ -300,6 +300,7 @@ void __init sanity_check_meminfo(void) sanity_check_meminfo_mpu(); end = memblock_end_of_DRAM(); high_memory = __va(end - 1) + 1; + memblock_set_current_limit(end); } /* -- cgit v1.2.3 From 42309ab450b608ddcfafa90e4cfa93a5001ecfba Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Fri, 27 Jun 2014 17:01:47 +0100 Subject: ARM: 8087/1: ptrace: reload syscall number after secure_computing() check On the syscall tracing path, we call out to secure_computing() to allow seccomp to check the syscall number being attempted. As part of this, a SIGTRAP may be sent to the tracer and the syscall could be re-written by a subsequent SET_SYSCALL ptrace request. Unfortunately, this new syscall is ignored by the current code unless TIF_SYSCALL_TRACE is also set on the current thread. This patch slightly reworks the enter path of the syscall tracing code so that we always reload the syscall number from current_thread_info()->syscall after the potential ptrace traps. Acked-by: Kees Cook Tested-by: Kees Cook Signed-off-by: Will Deacon Signed-off-by: Russell King --- arch/arm/kernel/ptrace.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/kernel/ptrace.c b/arch/arm/kernel/ptrace.c index 0dd3b79b15c3..0c27ed6f3f23 100644 --- a/arch/arm/kernel/ptrace.c +++ b/arch/arm/kernel/ptrace.c @@ -908,7 +908,7 @@ enum ptrace_syscall_dir { PTRACE_SYSCALL_EXIT, }; -static int tracehook_report_syscall(struct pt_regs *regs, +static void tracehook_report_syscall(struct pt_regs *regs, enum ptrace_syscall_dir dir) { unsigned long ip; @@ -926,7 +926,6 @@ static int tracehook_report_syscall(struct pt_regs *regs, current_thread_info()->syscall = -1; regs->ARM_ip = ip; - return current_thread_info()->syscall; } asmlinkage int syscall_trace_enter(struct pt_regs *regs, int scno) @@ -938,7 +937,9 @@ asmlinkage int syscall_trace_enter(struct pt_regs *regs, int scno) return -1; if (test_thread_flag(TIF_SYSCALL_TRACE)) - scno = tracehook_report_syscall(regs, PTRACE_SYSCALL_ENTER); + tracehook_report_syscall(regs, PTRACE_SYSCALL_ENTER); + + scno = current_thread_info()->syscall; if (test_thread_flag(TIF_SYSCALL_TRACEPOINT)) trace_sys_enter(regs, scno); -- cgit v1.2.3 From 752ef800a604c0b855077ec480dc9c6ea5b797ee Mon Sep 17 00:00:00 2001 From: Thomas Petazzoni Date: Thu, 12 Jun 2014 17:09:31 +0200 Subject: ARM: mvebu: move Armada 375 external abort logic as a quirk In preparation to a small re-organization of the initialization sequence in board-v7.c, this commit moves the registration of the custom external abort handler on Armada 375 later in the boot sequence, and makes it more similar to the other quirks that we already have. There is indeed no need to register this abort handler particularly early, it simply needs to be registered before switching to userspace. In addition to this, this commit makes the registration of the custom abort handler conditional on Armada 375 Z1, because Armada 375 A0 and later iterations are not affected by the issue. This commit was tested on both Armada 375 Z1 and Armada 375 A0 platforms. Signed-off-by: Thomas Petazzoni Link: https://lkml.kernel.org/r/1402585772-10405-3-git-send-email-thomas.petazzoni@free-electrons.com Signed-off-by: Jason Cooper --- arch/arm/mach-mvebu/board-v7.c | 17 +++++++++++++---- 1 file changed, 13 insertions(+), 4 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-mvebu/board-v7.c b/arch/arm/mach-mvebu/board-v7.c index 8bb742fdf5ca..804c952329e2 100644 --- a/arch/arm/mach-mvebu/board-v7.c +++ b/arch/arm/mach-mvebu/board-v7.c @@ -78,10 +78,17 @@ static void __init mvebu_timer_and_clk_init(void) mvebu_scu_enable(); coherency_init(); BUG_ON(mvebu_mbus_dt_init(coherency_available())); +} + +static void __init external_abort_quirk(void) +{ + u32 dev, rev; - if (of_machine_is_compatible("marvell,armada375")) - hook_fault_code(16 + 6, armada_375_external_abort_wa, SIGBUS, 0, - "imprecise external abort"); + if (mvebu_get_soc_id(&dev, &rev) == 0 && rev > ARMADA_375_Z1_REV) + return; + + hook_fault_code(16 + 6, armada_375_external_abort_wa, SIGBUS, 0, + "imprecise external abort"); } static void __init i2c_quirk(void) @@ -169,8 +176,10 @@ static void __init mvebu_dt_init(void) { if (of_machine_is_compatible("plathome,openblocks-ax3-4")) i2c_quirk(); - if (of_machine_is_compatible("marvell,a375-db")) + if (of_machine_is_compatible("marvell,a375-db")) { + external_abort_quirk(); thermal_quirk(); + } of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); } -- cgit v1.2.3 From 011788907ba955f87875fcfb4914881b28f7f99d Mon Sep 17 00:00:00 2001 From: Thomas Petazzoni Date: Thu, 12 Jun 2014 17:09:32 +0200 Subject: ARM: mvebu: update L2/PCIe deadlock workaround after L2CC cleanup Commit 497a92308af8e9385fa3d135f7f416a997e4b93b ("ARM: mvebu: implement L2/PCIe deadlock workaround") introduced some logic in coherency.c to adjust the PL310 cache controller Device Tree node of Armada 375 and Armada 38x platform to include the 'arm,io-coherent' property if the system is running with hardware I/O coherency enabled. However, with the L2CC driver cleanup done by Russell King, the initialization of the L2CC driver has been moved earlier, and is now part of the init_IRQ() ARM function in arch/arm/kernel/irq.c. Therefore, calling coherency_init() in ->init_time() is now too late, as the Device Tree property gets added too late (after the L2CC driver has been initialized). In order to fix this, this commit removes the ->init_time() callback use in board-v7.c and replaces it with an ->init_irq() callback. We therefore no longer use the default ->init_irq() callback, but we now use the default ->init_time() callback. In this newly introduced ->init_irq() callback, we call irqchip_init() which is the default behavior when ->init_irq() isn't defined, and then do the initialization related to the coherency: SCU, coherency fabric, and mvebu-mbus (which is needed to start secondary CPUs). Signed-off-by: Thomas Petazzoni Link: https://lkml.kernel.org/r/1402585772-10405-4-git-send-email-thomas.petazzoni@free-electrons.com Signed-off-by: Jason Cooper --- arch/arm/mach-mvebu/board-v7.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-mvebu/board-v7.c b/arch/arm/mach-mvebu/board-v7.c index 804c952329e2..b2524d689f21 100644 --- a/arch/arm/mach-mvebu/board-v7.c +++ b/arch/arm/mach-mvebu/board-v7.c @@ -23,6 +23,7 @@ #include #include #include +#include #include #include #include @@ -71,10 +72,9 @@ static int armada_375_external_abort_wa(unsigned long addr, unsigned int fsr, return 1; } -static void __init mvebu_timer_and_clk_init(void) +static void __init mvebu_init_irq(void) { - of_clk_init(NULL); - clocksource_of_init(); + irqchip_init(); mvebu_scu_enable(); coherency_init(); BUG_ON(mvebu_mbus_dt_init(coherency_available())); @@ -194,7 +194,7 @@ DT_MACHINE_START(ARMADA_370_XP_DT, "Marvell Armada 370/XP (Device Tree)") .l2c_aux_mask = ~0, .smp = smp_ops(armada_xp_smp_ops), .init_machine = mvebu_dt_init, - .init_time = mvebu_timer_and_clk_init, + .init_irq = mvebu_init_irq, .restart = mvebu_restart, .dt_compat = armada_370_xp_dt_compat, MACHINE_END @@ -207,7 +207,7 @@ static const char * const armada_375_dt_compat[] = { DT_MACHINE_START(ARMADA_375_DT, "Marvell Armada 375 (Device Tree)") .l2c_aux_val = 0, .l2c_aux_mask = ~0, - .init_time = mvebu_timer_and_clk_init, + .init_irq = mvebu_init_irq, .init_machine = mvebu_dt_init, .restart = mvebu_restart, .dt_compat = armada_375_dt_compat, @@ -222,7 +222,7 @@ static const char * const armada_38x_dt_compat[] = { DT_MACHINE_START(ARMADA_38X_DT, "Marvell Armada 380/385 (Device Tree)") .l2c_aux_val = 0, .l2c_aux_mask = ~0, - .init_time = mvebu_timer_and_clk_init, + .init_irq = mvebu_init_irq, .restart = mvebu_restart, .dt_compat = armada_38x_dt_compat, MACHINE_END -- cgit v1.2.3 From 6509dc74c9f55ffaa558738b96c4da8b98d39571 Mon Sep 17 00:00:00 2001 From: Thomas Petazzoni Date: Mon, 30 Jun 2014 14:09:25 +0200 Subject: ARM: mvebu: fix cpuidle implementation to work on big-endian systems On Marvell Armada XP, when a CPU comes back from deep idle state of cpuidle, it restarts its execution at armada_370_xp_cpu_resume(), which puts back the CPU into the coherency, and then calls the generic cpu_resume() function. While this works on little-endian configurations, it doesn't work on big-endian configurations because the CPU restarts in little-endian, and therefore must be switched back to big-endian to operate properly. To achieve this, a 'setend be' instruction must be executed in big-endian configurations. However, the ARM_BE8() macro that is used to implement nice compile-time conditional for ARM LE vs. ARM BE8 is not easily usable in inline assembly. Therefore, this patch moves the armada_370_xp_cpu_resume() C function, which was anyway just a block of inline assembly, into a proper pmsu_ll.S file, and adds the appropriate ARM_BE8(setend be) instruction. Without this patch, an Armada XP big endian configuration with cpuidle enabled fails to boot, as it hangs as soon as one of the CPU hits the deep idle state. Signed-off-by: Thomas Petazzoni Link: https://lkml.kernel.org/r/1404130165-3593-1-git-send-email-thomas.petazzoni@free-electrons.com Signed-off-by: Jason Cooper --- arch/arm/mach-mvebu/Makefile | 2 +- arch/arm/mach-mvebu/pmsu.c | 9 ++------- arch/arm/mach-mvebu/pmsu_ll.S | 25 +++++++++++++++++++++++++ 3 files changed, 28 insertions(+), 8 deletions(-) create mode 100644 arch/arm/mach-mvebu/pmsu_ll.S (limited to 'arch/arm') diff --git a/arch/arm/mach-mvebu/Makefile b/arch/arm/mach-mvebu/Makefile index 2ecb828e4a8b..1636cdbef01a 100644 --- a/arch/arm/mach-mvebu/Makefile +++ b/arch/arm/mach-mvebu/Makefile @@ -7,7 +7,7 @@ CFLAGS_pmsu.o := -march=armv7-a obj-y += system-controller.o mvebu-soc-id.o ifeq ($(CONFIG_MACH_MVEBU_V7),y) -obj-y += cpu-reset.o board-v7.o coherency.o coherency_ll.o pmsu.o +obj-y += cpu-reset.o board-v7.o coherency.o coherency_ll.o pmsu.o pmsu_ll.o obj-$(CONFIG_SMP) += platsmp.o headsmp.o platsmp-a9.o headsmp-a9.o obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o endif diff --git a/arch/arm/mach-mvebu/pmsu.c b/arch/arm/mach-mvebu/pmsu.c index 53a55c8520bf..a1d407c0febe 100644 --- a/arch/arm/mach-mvebu/pmsu.c +++ b/arch/arm/mach-mvebu/pmsu.c @@ -66,6 +66,8 @@ static void __iomem *pmsu_mp_base; extern void ll_disable_coherency(void); extern void ll_enable_coherency(void); +extern void armada_370_xp_cpu_resume(void); + static struct platform_device armada_xp_cpuidle_device = { .name = "cpuidle-armada-370-xp", }; @@ -140,13 +142,6 @@ static void armada_370_xp_pmsu_enable_l2_powerdown_onidle(void) writel(reg, pmsu_mp_base + L2C_NFABRIC_PM_CTL); } -static void armada_370_xp_cpu_resume(void) -{ - asm volatile("bl ll_add_cpu_to_smp_group\n\t" - "bl ll_enable_coherency\n\t" - "b cpu_resume\n\t"); -} - /* No locking is needed because we only access per-CPU registers */ void armada_370_xp_pmsu_idle_prepare(bool deepidle) { diff --git a/arch/arm/mach-mvebu/pmsu_ll.S b/arch/arm/mach-mvebu/pmsu_ll.S new file mode 100644 index 000000000000..fc3de68d8c54 --- /dev/null +++ b/arch/arm/mach-mvebu/pmsu_ll.S @@ -0,0 +1,25 @@ +/* + * Copyright (C) 2014 Marvell + * + * Thomas Petazzoni + * Gregory Clement + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include +#include + +/* + * This is the entry point through which CPUs exiting cpuidle deep + * idle state are going. + */ +ENTRY(armada_370_xp_cpu_resume) +ARM_BE8(setend be ) @ go BE8 if entered LE + bl ll_add_cpu_to_smp_group + bl ll_enable_coherency + b cpu_resume +ENDPROC(armada_370_xp_cpu_resume) + -- cgit v1.2.3 From b6220ad66bcd4a50737eb3c08e9466aa44f3bc98 Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Tue, 24 Jun 2014 18:05:29 -0700 Subject: sched: Fix compiler warnings Commit 143e1e28cb (sched: Rework sched_domain topology definition) introduced a number of functions with a return value of 'const int'. gcc doesn't know what to do with that and, if the kernel is compiled with W=1, complains with the following warnings whenever sched.h is included. include/linux/sched.h:875:25: warning: type qualifiers ignored on function return type include/linux/sched.h:882:25: warning: type qualifiers ignored on function return type include/linux/sched.h:889:25: warning: type qualifiers ignored on function return type include/linux/sched.h:1002:21: warning: type qualifiers ignored on function return type Commits fb2aa855 (sched, ARM: Create a dedicated scheduler topology table) and 607b45e9a (sched, powerpc: Create a dedicated topology table) introduce the same warning in the arm and powerpc code. Drop 'const' from the function declarations to fix the problem. The fix for all three patches has to be applied together to avoid compilation failures for the affected architectures. Acked-by: Vincent Guittot Acked-by: Benjamin Herrenschmidt Signed-off-by: Guenter Roeck Cc: Russell King Cc: Paul Mackerras Cc: Dietmar Eggemann Signed-off-by: Peter Zijlstra Link: http://lkml.kernel.org/r/1403658329-13196-1-git-send-email-linux@roeck-us.net Signed-off-by: Ingo Molnar --- arch/arm/kernel/topology.c | 2 +- arch/powerpc/kernel/smp.c | 2 +- include/linux/sched.h | 8 ++++---- 3 files changed, 6 insertions(+), 6 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/kernel/topology.c b/arch/arm/kernel/topology.c index 9d853189028b..e35d880f9773 100644 --- a/arch/arm/kernel/topology.c +++ b/arch/arm/kernel/topology.c @@ -275,7 +275,7 @@ void store_cpu_topology(unsigned int cpuid) cpu_topology[cpuid].socket_id, mpidr); } -static inline const int cpu_corepower_flags(void) +static inline int cpu_corepower_flags(void) { return SD_SHARE_PKG_RESOURCES | SD_SHARE_POWERDOMAIN; } diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c index 51a3ff78838a..1007fb802e6b 100644 --- a/arch/powerpc/kernel/smp.c +++ b/arch/powerpc/kernel/smp.c @@ -747,7 +747,7 @@ int setup_profiling_timer(unsigned int multiplier) #ifdef CONFIG_SCHED_SMT /* cpumask of CPUs with asymetric SMT dependancy */ -static const int powerpc_smt_flags(void) +static int powerpc_smt_flags(void) { int flags = SD_SHARE_CPUCAPACITY | SD_SHARE_PKG_RESOURCES; diff --git a/include/linux/sched.h b/include/linux/sched.h index 306f4f0c987a..0376b054a0d0 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -872,21 +872,21 @@ enum cpu_idle_type { #define SD_NUMA 0x4000 /* cross-node balancing */ #ifdef CONFIG_SCHED_SMT -static inline const int cpu_smt_flags(void) +static inline int cpu_smt_flags(void) { return SD_SHARE_CPUCAPACITY | SD_SHARE_PKG_RESOURCES; } #endif #ifdef CONFIG_SCHED_MC -static inline const int cpu_core_flags(void) +static inline int cpu_core_flags(void) { return SD_SHARE_PKG_RESOURCES; } #endif #ifdef CONFIG_NUMA -static inline const int cpu_numa_flags(void) +static inline int cpu_numa_flags(void) { return SD_NUMA; } @@ -999,7 +999,7 @@ void free_sched_domains(cpumask_var_t doms[], unsigned int ndoms); bool cpus_share_cache(int this_cpu, int that_cpu); typedef const struct cpumask *(*sched_domain_mask_f)(int cpu); -typedef const int (*sched_domain_flags_f)(void); +typedef int (*sched_domain_flags_f)(void); #define SDTL_OVERLAP 0x01 -- cgit v1.2.3 From 48f7bc86b6e75bcb71441c77378c1cde6ecbe475 Mon Sep 17 00:00:00 2001 From: Jon Medhurst Date: Thu, 23 Jan 2014 15:05:49 -0500 Subject: ARM: kprobes: Prevent known test failures stopping other tests running Due to a long-standing issue with Thumb symbol lookup [1] the jprobes tests fail when built into a kernel compiled as Thumb mode. (They work fine for ARM mode kernels or for Thumb when built as a loadable module.) Rather than have this problem terminate testing prematurely lets instead emit an error message and carry on with the main kprobes tests, delaying the final failure report until the end. [1] http://lists.infradead.org/pipermail/linux-arm-kernel/2011-August/063026.html Signed-off-by: Jon Medhurst --- arch/arm/kernel/kprobes-test.c | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/kernel/kprobes-test.c b/arch/arm/kernel/kprobes-test.c index 379639998d5a..08d731294bcd 100644 --- a/arch/arm/kernel/kprobes-test.c +++ b/arch/arm/kernel/kprobes-test.c @@ -225,6 +225,7 @@ static int pre_handler_called; static int post_handler_called; static int jprobe_func_called; static int kretprobe_handler_called; +static int tests_failed; #define FUNC_ARG1 0x12345678 #define FUNC_ARG2 0xabcdef @@ -461,6 +462,13 @@ static int run_api_tests(long (*func)(long, long)) pr_info(" jprobe\n"); ret = test_jprobe(func); +#if defined(CONFIG_THUMB2_KERNEL) && !defined(MODULE) + if (ret == -EINVAL) { + pr_err("FAIL: Known longtime bug with jprobe on Thumb kernels\n"); + tests_failed = ret; + ret = 0; + } +#endif if (ret < 0) return ret; @@ -1671,6 +1679,8 @@ static int __init run_all_tests(void) #endif out: + if (ret == 0) + ret = tests_failed; if (ret == 0) pr_info("Finished kprobe tests OK\n"); else -- cgit v1.2.3 From 272226007f436eff953c4398c1f5509cb74889ac Mon Sep 17 00:00:00 2001 From: Jon Medhurst Date: Mon, 3 Mar 2014 15:08:30 +0000 Subject: ARM: kprobes: Disallow instructions with PC and register specified shift ARM data processing instructions which have a register specified shift are defined as UNPREDICTABLE if PC is used for any register, not just the shift value as the code was previous assuming. This issue manifests on A15 devices as either test case failures or undefined instructions aborts. Reported-by: David Long Signed-off-by: Jon Medhurst --- arch/arm/kernel/kprobes-test-arm.c | 22 ++++++++++++---------- arch/arm/kernel/probes-arm.c | 6 +++--- 2 files changed, 15 insertions(+), 13 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/kernel/kprobes-test-arm.c b/arch/arm/kernel/kprobes-test-arm.c index 9db4b659d03e..e73f9cff9225 100644 --- a/arch/arm/kernel/kprobes-test-arm.c +++ b/arch/arm/kernel/kprobes-test-arm.c @@ -74,8 +74,6 @@ void kprobe_arm_test_cases(void) TEST_RRR( op "lt" s " r11, r",11,VAL1,", r",14,N(val),", asr r",7, 6,"")\ TEST_RR( op "gt" s " r12, r13" ", r",14,val, ", ror r",14,7,"")\ TEST_RR( op "le" s " r14, r",0, val, ", r13" ", lsl r",14,8,"")\ - TEST_RR( op s " r12, pc" ", r",14,val, ", ror r",14,7,"")\ - TEST_RR( op s " r14, r",0, val, ", pc" ", lsl r",14,8,"")\ TEST_R( op "eq" s " r0, r",11,VAL1,", #0xf5") \ TEST_R( op "ne" s " r11, r",0, VAL1,", #0xf5000000") \ TEST_R( op s " r7, r",8, VAL2,", #0x000af000") \ @@ -103,8 +101,6 @@ void kprobe_arm_test_cases(void) TEST_RRR( op "ge r",11,VAL1,", r",14,N(val),", asr r",7, 6,"") \ TEST_RR( op "le r13" ", r",14,val, ", ror r",14,7,"") \ TEST_RR( op "gt r",0, val, ", r13" ", lsl r",14,8,"") \ - TEST_RR( op " pc" ", r",14,val, ", ror r",14,7,"") \ - TEST_RR( op " r",0, val, ", pc" ", lsl r",14,8,"") \ TEST_R( op "eq r",11,VAL1,", #0xf5") \ TEST_R( op "ne r",0, VAL1,", #0xf5000000") \ TEST_R( op " r",8, VAL2,", #0x000af000") @@ -125,7 +121,6 @@ void kprobe_arm_test_cases(void) TEST_RR( op "ge" s " r11, r",11,N(val),", asr r",7, 6,"") \ TEST_RR( op "lt" s " r12, r",11,val, ", ror r",14,7,"") \ TEST_R( op "gt" s " r14, r13" ", lsl r",14,8,"") \ - TEST_R( op "le" s " r14, pc" ", lsl r",14,8,"") \ TEST( op "eq" s " r0, #0xf5") \ TEST( op "ne" s " r11, #0xf5000000") \ TEST( op s " r7, #0x000af000") \ @@ -159,12 +154,19 @@ void kprobe_arm_test_cases(void) TEST_SUPPORTED("cmp pc, #0x1000"); TEST_SUPPORTED("cmp sp, #0x1000"); - /* Data-processing with PC as shift*/ + /* Data-processing with PC and a shift count in a register */ TEST_UNSUPPORTED(__inst_arm(0xe15c0f1e) " @ cmp r12, r14, asl pc") TEST_UNSUPPORTED(__inst_arm(0xe1a0cf1e) " @ mov r12, r14, asl pc") TEST_UNSUPPORTED(__inst_arm(0xe08caf1e) " @ add r10, r12, r14, asl pc") - - /* Data-processing with PC as shift*/ + TEST_UNSUPPORTED(__inst_arm(0xe151021f) " @ cmp r1, pc, lsl r2") + TEST_UNSUPPORTED(__inst_arm(0xe17f0211) " @ cmn pc, r1, lsl r2") + TEST_UNSUPPORTED(__inst_arm(0xe1a0121f) " @ mov r1, pc, lsl r2") + TEST_UNSUPPORTED(__inst_arm(0xe1a0f211) " @ mov pc, r1, lsl r2") + TEST_UNSUPPORTED(__inst_arm(0xe042131f) " @ sub r1, r2, pc, lsl r3") + TEST_UNSUPPORTED(__inst_arm(0xe1cf1312) " @ bic r1, pc, r2, lsl r3") + TEST_UNSUPPORTED(__inst_arm(0xe081f312) " @ add pc, r1, r2, lsl r3") + + /* Data-processing with PC as a target and status registers updated */ TEST_UNSUPPORTED("movs pc, r1") TEST_UNSUPPORTED("movs pc, r1, lsl r2") TEST_UNSUPPORTED("movs pc, #0x10000") @@ -187,14 +189,14 @@ void kprobe_arm_test_cases(void) TEST_BF_R ("add pc, pc, r",14,2f-1f-8,"") TEST_BF_R ("add pc, r",14,2f-1f-8,", pc") TEST_BF_R ("mov pc, r",0,2f,"") - TEST_BF_RR("mov pc, r",0,2f,", asl r",1,0,"") + TEST_BF_R ("add pc, pc, r",14,(2f-1f-8)*2,", asr #1") TEST_BB( "sub pc, pc, #1b-2b+8") #if __LINUX_ARM_ARCH__ == 6 && !defined(CONFIG_CPU_V7) TEST_BB( "sub pc, pc, #1b-2b+8-2") /* UNPREDICTABLE before and after ARMv6 */ #endif TEST_BB_R( "sub pc, pc, r",14, 1f-2f+8,"") TEST_BB_R( "rsb pc, r",14,1f-2f+8,", pc") - TEST_RR( "add pc, pc, r",10,-2,", asl r",11,1,"") + TEST_R( "add pc, pc, r",10,-2,", asl #1") #ifdef CONFIG_THUMB2_KERNEL TEST_ARM_TO_THUMB_INTERWORK_R("add pc, pc, r",0,3f-1f-8+1,"") TEST_ARM_TO_THUMB_INTERWORK_R("sub pc, r",0,3f+8+1,", #8") diff --git a/arch/arm/kernel/probes-arm.c b/arch/arm/kernel/probes-arm.c index 51a13a027989..8eaef81d8344 100644 --- a/arch/arm/kernel/probes-arm.c +++ b/arch/arm/kernel/probes-arm.c @@ -341,12 +341,12 @@ static const union decode_item arm_cccc_000x_table[] = { /* CMP (reg-shift reg) cccc 0001 0101 xxxx xxxx xxxx 0xx1 xxxx */ /* CMN (reg-shift reg) cccc 0001 0111 xxxx xxxx xxxx 0xx1 xxxx */ DECODE_EMULATEX (0x0f900090, 0x01100010, PROBES_DATA_PROCESSING_REG, - REGS(ANY, 0, NOPC, 0, ANY)), + REGS(NOPC, 0, NOPC, 0, NOPC)), /* MOV (reg-shift reg) cccc 0001 101x xxxx xxxx xxxx 0xx1 xxxx */ /* MVN (reg-shift reg) cccc 0001 111x xxxx xxxx xxxx 0xx1 xxxx */ DECODE_EMULATEX (0x0fa00090, 0x01a00010, PROBES_DATA_PROCESSING_REG, - REGS(0, ANY, NOPC, 0, ANY)), + REGS(0, NOPC, NOPC, 0, NOPC)), /* AND (reg-shift reg) cccc 0000 000x xxxx xxxx xxxx 0xx1 xxxx */ /* EOR (reg-shift reg) cccc 0000 001x xxxx xxxx xxxx 0xx1 xxxx */ @@ -359,7 +359,7 @@ static const union decode_item arm_cccc_000x_table[] = { /* ORR (reg-shift reg) cccc 0001 100x xxxx xxxx xxxx 0xx1 xxxx */ /* BIC (reg-shift reg) cccc 0001 110x xxxx xxxx xxxx 0xx1 xxxx */ DECODE_EMULATEX (0x0e000090, 0x00000010, PROBES_DATA_PROCESSING_REG, - REGS(ANY, ANY, NOPC, 0, ANY)), + REGS(NOPC, NOPC, NOPC, 0, NOPC)), DECODE_END }; -- cgit v1.2.3 From 449fd15fbcde239875031d70fd06abb4a0e1ed09 Mon Sep 17 00:00:00 2001 From: Jon Medhurst Date: Tue, 11 Mar 2014 14:05:26 +0000 Subject: ARM: kprobes: Fix test code compilation errors for ARMv4 targets Conditionally compile kprobes test cases for ARMv5 instructions to avoid compilation errors with ARMv4 targets like: /tmp/cc7Tx8ST.s:16740: Error: selected processor does not support ARM mode `clz r0,r0' Signed-off-by: Jon Medhurst --- arch/arm/kernel/kprobes-test-arm.c | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/kernel/kprobes-test-arm.c b/arch/arm/kernel/kprobes-test-arm.c index e73f9cff9225..cb1424240ff6 100644 --- a/arch/arm/kernel/kprobes-test-arm.c +++ b/arch/arm/kernel/kprobes-test-arm.c @@ -218,6 +218,7 @@ void kprobe_arm_test_cases(void) TEST_BB_R("bx r",7,2f,"") TEST_BF_R("bxeq r",14,2f,"") +#if __LINUX_ARM_ARCH__ >= 5 TEST_R("clz r0, r",0, 0x0,"") TEST_R("clzeq r7, r",14,0x1,"") TEST_R("clz lr, r",7, 0xffffffff,"") @@ -339,6 +340,7 @@ void kprobe_arm_test_cases(void) TEST_UNSUPPORTED(__inst_arm(0xe16f02e1) " @ smultt pc, r1, r2") TEST_UNSUPPORTED(__inst_arm(0xe16002ef) " @ smultt r0, pc, r2") TEST_UNSUPPORTED(__inst_arm(0xe1600fe1) " @ smultt r0, r1, pc") +#endif TEST_GROUP("Multiply and multiply-accumulate") @@ -561,6 +563,7 @@ void kprobe_arm_test_cases(void) TEST_UNSUPPORTED("ldrsht r1, [r2], #48") #endif +#if __LINUX_ARM_ARCH__ >= 5 TEST_RPR( "strd r",0, VAL1,", [r",1, 48,", -r",2,24,"]") TEST_RPR( "strccd r",8, VAL2,", [r",13,0, ", r",12,48,"]") TEST_RPR( "strd r",4, VAL1,", [r",2, 24,", r",3, 48,"]!") @@ -597,6 +600,7 @@ void kprobe_arm_test_cases(void) TEST_UNSUPPORTED(__inst_arm(0xe1efc3d0) " @ ldrd r12, [pc, #48]!") TEST_UNSUPPORTED(__inst_arm(0xe0c9f3d0) " @ ldrd pc, [r9], #48") TEST_UNSUPPORTED(__inst_arm(0xe0c9e3d0) " @ ldrd lr, [r9], #48") +#endif TEST_GROUP("Miscellaneous") @@ -1229,7 +1233,9 @@ void kprobe_arm_test_cases(void) TEST_COPROCESSOR( "mrc"two" 0, 0, r0, cr0, cr0, 0") COPROCESSOR_INSTRUCTIONS_ST_LD("",e) +#if __LINUX_ARM_ARCH__ >= 5 COPROCESSOR_INSTRUCTIONS_MC_MR("",e) +#endif TEST_UNSUPPORTED("svc 0") TEST_UNSUPPORTED("svc 0xffffff") @@ -1289,7 +1295,9 @@ void kprobe_arm_test_cases(void) TEST( "blx __dummy_thumb_subroutine_odd") #endif /* __LINUX_ARM_ARCH__ >= 6 */ +#if __LINUX_ARM_ARCH__ >= 5 COPROCESSOR_INSTRUCTIONS_ST_LD("2",f) +#endif #if __LINUX_ARM_ARCH__ >= 6 COPROCESSOR_INSTRUCTIONS_MC_MR("2",f) #endif -- cgit v1.2.3 From dd94324b983afe114ba9e7ee3649313b451f63ce Mon Sep 17 00:00:00 2001 From: Rajendra Nayak Date: Tue, 27 May 2014 14:25:43 +0530 Subject: ARM: dts: dra7xx-clocks: Fix the l3 and l4 clock rates Without the patch: /debug/.../dpll_core_x2_ck/dpll_core_h12x2_ck # cat clk_rate 532000000 /debug/.../dpll_core_x2_ck/dpll_core_h12x2_ck/l3_iclk_div # cat clk_rate 532000000 /debug/.../dpll_core_x2_ck/dpll_core_h12x2_ck/l3_iclk_div/l4_root_clk_div # cat clk_rate 532000000 With the patch: /debug/.../dpll_core_x2_ck/dpll_core_h12x2_ck # cat clk_rate 532000000 /debug/.../dpll_core_x2_ck/dpll_core_h12x2_ck/l3_iclk_div # cat clk_rate 266000000 /debug/.../dpll_core_x2_ck/dpll_core_h12x2_ck/l3_iclk_div/l4_root_clk_div # cat clk_rate 133000000 The l3 clock derived from core DPLL is actually a divider clock, with the default divider set to 2. l4 then derived from l3 is a fixed factor clock, but the fixed divider is 2 and not 1. Which means the l3 clock is half of core DPLLs h12x2 and l4 is half of l3 (as seen with this patch) Signed-off-by: Rajendra Nayak Signed-off-by: Tero Kristo --- arch/arm/boot/dts/dra7xx-clocks.dtsi | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/dra7xx-clocks.dtsi b/arch/arm/boot/dts/dra7xx-clocks.dtsi index b03cfe49d22b..d126d5763422 100644 --- a/arch/arm/boot/dts/dra7xx-clocks.dtsi +++ b/arch/arm/boot/dts/dra7xx-clocks.dtsi @@ -673,10 +673,12 @@ l3_iclk_div: l3_iclk_div { #clock-cells = <0>; - compatible = "fixed-factor-clock"; + compatible = "ti,divider-clock"; + ti,max-div = <2>; + ti,bit-shift = <4>; + reg = <0x0100>; clocks = <&dpll_core_h12x2_ck>; - clock-mult = <1>; - clock-div = <1>; + ti,index-power-of-two; }; l4_root_clk_div: l4_root_clk_div { @@ -684,7 +686,7 @@ compatible = "fixed-factor-clock"; clocks = <&l3_iclk_div>; clock-mult = <1>; - clock-div = <1>; + clock-div = <2>; }; video1_clk2_div: video1_clk2_div { -- cgit v1.2.3 From 73ea6ec66a9f6b81335e55ca642f25172c283b20 Mon Sep 17 00:00:00 2001 From: Abhilash Kesavan Date: Sat, 5 Jul 2014 06:09:18 +0900 Subject: ARM: EXYNOS: Fix the check for non-smp configuration Commit 1754c42e3db5("ARM: exynos: move sysram info to exynos.c") missed out the CONFIG_ prefix causing exynos_sysram_init() to get called twice for SMP configurations. Signed-off-by: Abhilash Kesavan Reviewed-by: Sachin Kamat Signed-off-by: Kukjin Kim --- arch/arm/mach-exynos/exynos.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-exynos/exynos.c b/arch/arm/mach-exynos/exynos.c index f38cf7c110cc..95cad252eb1b 100644 --- a/arch/arm/mach-exynos/exynos.c +++ b/arch/arm/mach-exynos/exynos.c @@ -297,7 +297,7 @@ static void __init exynos_dt_machine_init(void) * This is called from smp_prepare_cpus if we've built for SMP, but * we still need to set it up for PM and firmware ops if not. */ - if (!IS_ENABLED(SMP)) + if (!IS_ENABLED(CONFIG_SMP)) exynos_sysram_init(); exynos_cpuidle_init(); -- cgit v1.2.3 From 2fd82d33011479e4ee3b1df8ddaa561201fe145d Mon Sep 17 00:00:00 2001 From: Jaewon Kim Date: Sat, 5 Jul 2014 06:31:31 +0900 Subject: ARM: dts: fix pwm-cells in pwm node for exynos4 pwm-cells should be 3. Third cell is optional PWM flags. And This flag supported by this binding is PWM_POLARITY_INVERTED. Signed-off-by: Jaewon Kim Reviewed-by: Sachin Kamat Signed-off-by: Kukjin Kim --- arch/arm/boot/dts/exynos4.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi index fbaf426d2daa..17b22e9cc2aa 100644 --- a/arch/arm/boot/dts/exynos4.dtsi +++ b/arch/arm/boot/dts/exynos4.dtsi @@ -554,7 +554,7 @@ interrupts = <0 37 0>, <0 38 0>, <0 39 0>, <0 40 0>, <0 41 0>; clocks = <&clock CLK_PWM>; clock-names = "timers"; - #pwm-cells = <2>; + #pwm-cells = <3>; status = "disabled"; }; -- cgit v1.2.3 From d767af5e66ee11928bd17df32b342a8737177376 Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Sun, 29 Jun 2014 15:48:53 +0200 Subject: ARM: sunxi: Reintroduce the restart code for A10/A20 SoCs This partly reverts commits 553600502b84 (ARM: sunxi: Remove reset code from the platform) and 5e669ec583e2 (ARM: sunxi: Remove init_machine callback) for the sun4i, sun5i and sun7i families. This is needed because the watchdog counterpart of these commits was dropped, and didn't make it into 3.16. In order to still be able to reboot the board, we need to reintroduce that code. Of course, the long term view is still to get rid of that code in mach-sunxi. Signed-off-by: Maxime Ripard Signed-off-by: Olof Johansson --- arch/arm/mach-sunxi/sunxi.c | 77 +++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 77 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/mach-sunxi/sunxi.c b/arch/arm/mach-sunxi/sunxi.c index 3f9587bb51f6..b6085084e0ff 100644 --- a/arch/arm/mach-sunxi/sunxi.c +++ b/arch/arm/mach-sunxi/sunxi.c @@ -12,8 +12,81 @@ #include #include +#include +#include +#include +#include +#include +#include +#include +#include #include +#include +#include + +#define SUN4I_WATCHDOG_CTRL_REG 0x00 +#define SUN4I_WATCHDOG_CTRL_RESTART BIT(0) +#define SUN4I_WATCHDOG_MODE_REG 0x04 +#define SUN4I_WATCHDOG_MODE_ENABLE BIT(0) +#define SUN4I_WATCHDOG_MODE_RESET_ENABLE BIT(1) + +#define SUN6I_WATCHDOG1_IRQ_REG 0x00 +#define SUN6I_WATCHDOG1_CTRL_REG 0x10 +#define SUN6I_WATCHDOG1_CTRL_RESTART BIT(0) +#define SUN6I_WATCHDOG1_CONFIG_REG 0x14 +#define SUN6I_WATCHDOG1_CONFIG_RESTART BIT(0) +#define SUN6I_WATCHDOG1_CONFIG_IRQ BIT(1) +#define SUN6I_WATCHDOG1_MODE_REG 0x18 +#define SUN6I_WATCHDOG1_MODE_ENABLE BIT(0) + +static void __iomem *wdt_base; + +static void sun4i_restart(enum reboot_mode mode, const char *cmd) +{ + if (!wdt_base) + return; + + /* Enable timer and set reset bit in the watchdog */ + writel(SUN4I_WATCHDOG_MODE_ENABLE | SUN4I_WATCHDOG_MODE_RESET_ENABLE, + wdt_base + SUN4I_WATCHDOG_MODE_REG); + + /* + * Restart the watchdog. The default (and lowest) interval + * value for the watchdog is 0.5s. + */ + writel(SUN4I_WATCHDOG_CTRL_RESTART, wdt_base + SUN4I_WATCHDOG_CTRL_REG); + + while (1) { + mdelay(5); + writel(SUN4I_WATCHDOG_MODE_ENABLE | SUN4I_WATCHDOG_MODE_RESET_ENABLE, + wdt_base + SUN4I_WATCHDOG_MODE_REG); + } +} + +static struct of_device_id sunxi_restart_ids[] = { + { .compatible = "allwinner,sun4i-a10-wdt" }, + { /*sentinel*/ } +}; + +static void sunxi_setup_restart(void) +{ + struct device_node *np; + + np = of_find_matching_node(NULL, sunxi_restart_ids); + if (WARN(!np, "unable to setup watchdog restart")) + return; + + wdt_base = of_iomap(np, 0); + WARN(!wdt_base, "failed to map watchdog base address"); +} + +static void __init sunxi_dt_init(void) +{ + sunxi_setup_restart(); + + of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); +} static const char * const sunxi_board_dt_compat[] = { "allwinner,sun4i-a10", @@ -23,7 +96,9 @@ static const char * const sunxi_board_dt_compat[] = { }; DT_MACHINE_START(SUNXI_DT, "Allwinner A1X (Device Tree)") + .init_machine = sunxi_dt_init, .dt_compat = sunxi_board_dt_compat, + .restart = sun4i_restart, MACHINE_END static const char * const sun6i_board_dt_compat[] = { @@ -51,5 +126,7 @@ static const char * const sun7i_board_dt_compat[] = { }; DT_MACHINE_START(SUN7I_DT, "Allwinner sun7i (A20) Family") + .init_machine = sunxi_dt_init, .dt_compat = sun7i_board_dt_compat, + .restart = sun4i_restart, MACHINE_END -- cgit v1.2.3 From 0cd8d4052ae4c690fc3ea6133a0ad5404360308d Mon Sep 17 00:00:00 2001 From: Suman Anna Date: Sun, 6 Jul 2014 15:51:23 -0600 Subject: ARM: OMAP3: PRM/CM: Add back macros used by TI DSP/Bridge driver The commit 7be914f {ARM: OMAP3: PRM/CM: Cleanup unused header} removed some of the macros used by the TI DSP/Bridge driver. This fixes the following build errors when trying to build DSP/Bridge driver (disabled at present), otherwise results in the following build errors: drivers/staging/tidspbridge/core/tiomap3430.c:531:31: error: 'OMAP3430_AUTO_IVA2_DPLL_SHIFT' undeclared (first use in this function) drivers/staging/tidspbridge/core/tiomap3430.c:531:31: note: each undeclared identifier is reported only once for each function it appears in make[3]: *** [drivers/staging/tidspbridge/core/tiomap3430.o] Error 1 make[3]: *** Waiting for unfinished jobs.... drivers/staging/tidspbridge/core/tiomap_io.c: In function 'sm_interrupt_dsp': drivers/staging/tidspbridge/core/tiomap_io.c:404:31: error: 'OMAP3430_AUTO_IVA2_DPLL_SHIFT' undeclared (first use in this function) drivers/staging/tidspbridge/core/tiomap_io.c:404:31: note: each undeclared identifier is reported only once for each function it appears in drivers/staging/tidspbridge/core/tiomap_io.c:414:12: error: 'OMAP3430_IVA2_DPLL_FREQSEL_SHIFT' undeclared (first use in this function) drivers/staging/tidspbridge/core/tiomap_io.c:415:12: error: 'OMAP3430_EN_IVA2_DPLL_SHIFT' undeclared (first use in this function) make[3]: *** [drivers/staging/tidspbridge/core/tiomap_io.o] Error 1 drivers/staging/tidspbridge/core/tiomap3430_pwr.c: In function 'dsp_clk_wakeup_event_ctrl': drivers/staging/tidspbridge/core/tiomap3430_pwr.c:442:19: error: 'OMAP3430_GRPSEL_GPT5_MASK' undeclared (first use in this function) drivers/staging/tidspbridge/core/tiomap3430_pwr.c:442:19: note: each undeclared identifier is reported only once for each function it appears in drivers/staging/tidspbridge/core/tiomap3430_pwr.c:455:19: error: 'OMAP3430_GRPSEL_GPT6_MASK' undeclared (first use in this function) drivers/staging/tidspbridge/core/tiomap3430_pwr.c:468:19: error: 'OMAP3430_GRPSEL_GPT7_MASK' undeclared (first use in this function) drivers/staging/tidspbridge/core/tiomap3430_pwr.c:481:19: error: 'OMAP3430_GRPSEL_GPT8_MASK' undeclared (first use in this function) drivers/staging/tidspbridge/core/tiomap3430_pwr.c:494:19: error: 'OMAP3430_GRPSEL_MCBSP1_MASK' undeclared (first use in this function) drivers/staging/tidspbridge/core/tiomap3430_pwr.c:546:19: error: 'OMAP3430_GRPSEL_MCBSP5_MASK' undeclared (first use in this function) make[3]: *** [drivers/staging/tidspbridge/core/tiomap3430_pwr.o] Error 1 make[2]: *** [drivers/staging/tidspbridge] Error 2 Fixes: 7be914f (ARM: OMAP3: PRM/CM: Cleanup unused header) Cc: Rajendra Nayak Cc: Paul Walmsley Signed-off-by: Suman Anna Signed-off-by: Paul Walmsley --- arch/arm/mach-omap2/cm-regbits-34xx.h | 3 +++ arch/arm/mach-omap2/prm-regbits-34xx.h | 6 ++++++ 2 files changed, 9 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/mach-omap2/cm-regbits-34xx.h b/arch/arm/mach-omap2/cm-regbits-34xx.h index 04dab2fcf862..ee6c784cd6b7 100644 --- a/arch/arm/mach-omap2/cm-regbits-34xx.h +++ b/arch/arm/mach-omap2/cm-regbits-34xx.h @@ -26,11 +26,14 @@ #define OMAP3430_EN_WDT3_SHIFT 12 #define OMAP3430_CM_FCLKEN_IVA2_EN_IVA2_MASK (1 << 0) #define OMAP3430_CM_FCLKEN_IVA2_EN_IVA2_SHIFT 0 +#define OMAP3430_IVA2_DPLL_FREQSEL_SHIFT 4 #define OMAP3430_IVA2_DPLL_FREQSEL_MASK (0xf << 4) #define OMAP3430_EN_IVA2_DPLL_DRIFTGUARD_SHIFT 3 +#define OMAP3430_EN_IVA2_DPLL_SHIFT 0 #define OMAP3430_EN_IVA2_DPLL_MASK (0x7 << 0) #define OMAP3430_ST_IVA2_SHIFT 0 #define OMAP3430_ST_IVA2_CLK_MASK (1 << 0) +#define OMAP3430_AUTO_IVA2_DPLL_SHIFT 0 #define OMAP3430_AUTO_IVA2_DPLL_MASK (0x7 << 0) #define OMAP3430_IVA2_CLK_SRC_SHIFT 19 #define OMAP3430_IVA2_CLK_SRC_WIDTH 3 diff --git a/arch/arm/mach-omap2/prm-regbits-34xx.h b/arch/arm/mach-omap2/prm-regbits-34xx.h index 106132db532b..cbefbd7cfdb5 100644 --- a/arch/arm/mach-omap2/prm-regbits-34xx.h +++ b/arch/arm/mach-omap2/prm-regbits-34xx.h @@ -35,6 +35,8 @@ #define OMAP3430_LOGICSTATEST_MASK (1 << 2) #define OMAP3430_LASTLOGICSTATEENTERED_MASK (1 << 2) #define OMAP3430_LASTPOWERSTATEENTERED_MASK (0x3 << 0) +#define OMAP3430_GRPSEL_MCBSP5_MASK (1 << 10) +#define OMAP3430_GRPSEL_MCBSP1_MASK (1 << 9) #define OMAP3630_GRPSEL_UART4_MASK (1 << 18) #define OMAP3430_GRPSEL_GPIO6_MASK (1 << 17) #define OMAP3430_GRPSEL_GPIO5_MASK (1 << 16) @@ -42,6 +44,10 @@ #define OMAP3430_GRPSEL_GPIO3_MASK (1 << 14) #define OMAP3430_GRPSEL_GPIO2_MASK (1 << 13) #define OMAP3430_GRPSEL_UART3_MASK (1 << 11) +#define OMAP3430_GRPSEL_GPT8_MASK (1 << 9) +#define OMAP3430_GRPSEL_GPT7_MASK (1 << 8) +#define OMAP3430_GRPSEL_GPT6_MASK (1 << 7) +#define OMAP3430_GRPSEL_GPT5_MASK (1 << 6) #define OMAP3430_GRPSEL_MCBSP4_MASK (1 << 2) #define OMAP3430_GRPSEL_MCBSP3_MASK (1 << 1) #define OMAP3430_GRPSEL_MCBSP2_MASK (1 << 0) -- cgit v1.2.3 From 1ea0999e085acb5dacaff163c3941b1d91d59c89 Mon Sep 17 00:00:00 2001 From: Roger Quadros Date: Sun, 6 Jul 2014 15:51:24 -0600 Subject: ARM: DRA7: hwmod: Fixup SATA hwmod Get rid of optional clock as that is now managed by the AHCI platform driver. Correct .mpu_rt_idx to 1 as the module register space (SYSCONFIG..) is passed as the second memory resource in the device tree. Signed-off-by: Roger Quadros Reviewed-by: Rajendra Nayak Tested-by: Sekhar Nori Signed-off-by: Paul Walmsley --- arch/arm/mach-omap2/omap_hwmod_7xx_data.c | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c index 20b4398cec05..1209266a96b1 100644 --- a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c @@ -1268,9 +1268,6 @@ static struct omap_hwmod_class dra7xx_sata_hwmod_class = { }; /* sata */ -static struct omap_hwmod_opt_clk sata_opt_clks[] = { - { .role = "ref_clk", .clk = "sata_ref_clk" }, -}; static struct omap_hwmod dra7xx_sata_hwmod = { .name = "sata", @@ -1278,6 +1275,7 @@ static struct omap_hwmod dra7xx_sata_hwmod = { .clkdm_name = "l3init_clkdm", .flags = HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY, .main_clk = "func_48m_fclk", + .mpu_rt_idx = 1, .prcm = { .omap4 = { .clkctrl_offs = DRA7XX_CM_L3INIT_SATA_CLKCTRL_OFFSET, @@ -1285,8 +1283,6 @@ static struct omap_hwmod dra7xx_sata_hwmod = { .modulemode = MODULEMODE_SWCTRL, }, }, - .opt_clks = sata_opt_clks, - .opt_clks_cnt = ARRAY_SIZE(sata_opt_clks), }; /* -- cgit v1.2.3 From d904b38df0db137dc5f562010231f76c443cbe28 Mon Sep 17 00:00:00 2001 From: Roger Quadros Date: Sun, 6 Jul 2014 15:51:24 -0600 Subject: ARM: DRA7: hwmod: Add SYSCONFIG for usb_otg_ss Add the sysconfig class bits for the Super Speed USB controllers Signed-off-by: Roger Quadros Reviewed-by: Rajendra Nayak Tested-by: Sekhar Nori Signed-off-by: Paul Walmsley --- arch/arm/mach-omap2/omap_hwmod_7xx_data.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c index 1209266a96b1..284324f2b98a 100644 --- a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c @@ -1727,8 +1727,20 @@ static struct omap_hwmod dra7xx_uart6_hwmod = { * */ +static struct omap_hwmod_class_sysconfig dra7xx_usb_otg_ss_sysc = { + .rev_offs = 0x0000, + .sysc_offs = 0x0010, + .sysc_flags = (SYSC_HAS_DMADISABLE | SYSC_HAS_MIDLEMODE | + SYSC_HAS_SIDLEMODE), + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | + SIDLE_SMART_WKUP | MSTANDBY_FORCE | MSTANDBY_NO | + MSTANDBY_SMART | MSTANDBY_SMART_WKUP), + .sysc_fields = &omap_hwmod_sysc_type2, +}; + static struct omap_hwmod_class dra7xx_usb_otg_ss_hwmod_class = { .name = "usb_otg_ss", + .sysc = &dra7xx_usb_otg_ss_sysc, }; /* usb_otg_ss1 */ -- cgit v1.2.3 From 6340c8720ce34f35b41a2e15d69fe3d755cb2104 Mon Sep 17 00:00:00 2001 From: Tero Kristo Date: Wed, 2 Jul 2014 11:47:35 +0300 Subject: ARM: OMAP2+: clock/dpll: fix _dpll_test_fint arithmetics overflow The divider value provided to the _dpll_test_fint can reach value of 256 with J type DPLLs (USB etc.), which causes an overflow with the u8 datatype. Fix this by changing the parameter to be an int instead. Signed-off-by: Tero Kristo [paul@pwsan.com: changed type of 'n' to unsigned int] Signed-off-by: Paul Walmsley --- arch/arm/mach-omap2/clkt_dpll.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-omap2/clkt_dpll.c b/arch/arm/mach-omap2/clkt_dpll.c index 332af927f4d3..67fd26a18441 100644 --- a/arch/arm/mach-omap2/clkt_dpll.c +++ b/arch/arm/mach-omap2/clkt_dpll.c @@ -76,7 +76,7 @@ * (assuming that it is counting N upwards), or -2 if the enclosing loop * should skip to the next iteration (again assuming N is increasing). */ -static int _dpll_test_fint(struct clk_hw_omap *clk, u8 n) +static int _dpll_test_fint(struct clk_hw_omap *clk, unsigned int n) { struct dpll_data *dd; long fint, fint_min, fint_max; -- cgit v1.2.3 From 7abb1a530e87fce0d73f85ac7802648bb542cf26 Mon Sep 17 00:00:00 2001 From: Nishanth Menon Date: Fri, 16 May 2014 17:36:09 -0500 Subject: ARM: DRA7/AM43XX: fix header definition for omap44xx_restart omap44xx_restart is defined as a static void inline when DRA7/AM437X is defined alone, which implies that the restart function is no longer functional even though it is built in. So, fix the definition of the same. Signed-off-by: Nishanth Menon Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/common.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h index b2d252bf4a53..dc571f1d3b8a 100644 --- a/arch/arm/mach-omap2/common.h +++ b/arch/arm/mach-omap2/common.h @@ -162,7 +162,8 @@ static inline void omap3xxx_restart(enum reboot_mode mode, const char *cmd) } #endif -#if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5) +#if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5) || \ + defined(CONFIG_SOC_DRA7XX) || defined(CONFIG_SOC_AM43XX) void omap44xx_restart(enum reboot_mode mode, const char *cmd); #else static inline void omap44xx_restart(enum reboot_mode mode, const char *cmd) -- cgit v1.2.3 From e120fb459693bbc1ac3eabdd65c3659d7cfbfd2a Mon Sep 17 00:00:00 2001 From: Roger Quadros Date: Fri, 4 Jul 2014 12:55:43 +0300 Subject: ARM: dts: dra7-evm: Make VDDA_1V8_PHY supply always on After clarification from the hardware team it was found that this 1.8V PHY supply can't be switched OFF when SoC is Active. Since the PHY IPs don't contain isolation logic built in the design to allow the power rail to be switched off, there is a very high risk of IP reliability and additional leakage paths which can result in additional power consumption. The only scenario where this rail can be switched off is part of Power on reset sequencing, but it needs to be kept always-on during operation. This patch is required for proper functionality of USB, SATA and PCIe on DRA7-evm. CC: Rajendra Nayak CC: Tero Kristo Signed-off-by: Roger Quadros Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/dra7-evm.dts | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts index 4adc28039c30..83089540e324 100644 --- a/arch/arm/boot/dts/dra7-evm.dts +++ b/arch/arm/boot/dts/dra7-evm.dts @@ -240,6 +240,7 @@ regulator-name = "ldo3"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; + regulator-always-on; regulator-boot-on; }; -- cgit v1.2.3 From 526570cb2067363ec93681837e43b4c774b1616c Mon Sep 17 00:00:00 2001 From: Suman Anna Date: Tue, 24 Jun 2014 00:24:27 -0500 Subject: ARM: OMAP2+: create dsp device only on OMAP3 SoCs The DSP platform device for TI DSP/Bridge is currently created unconditionally whenever CONFIG_TIDSPBRIDGE is enabled. This device should only be created on OMAP34xx/ OMAP36xx SoCs, and not for other OMAP3 derived SoCs or when booting multi-arch images on other SoCs. So, add a check for the SoC family both before creating the device and allocating the carveout memory for the device. Signed-off-by: Suman Anna Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/dsp.c | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/mach-omap2/dsp.c b/arch/arm/mach-omap2/dsp.c index b8208b4b1bd9..f7492df1cbba 100644 --- a/arch/arm/mach-omap2/dsp.c +++ b/arch/arm/mach-omap2/dsp.c @@ -29,6 +29,7 @@ #ifdef CONFIG_TIDSPBRIDGE_DVFS #include "omap-pm.h" #endif +#include "soc.h" #include @@ -59,6 +60,9 @@ void __init omap_dsp_reserve_sdram_memblock(void) phys_addr_t size = CONFIG_TIDSPBRIDGE_MEMPOOL_SIZE; phys_addr_t paddr; + if (!cpu_is_omap34xx()) + return; + if (!size) return; @@ -83,6 +87,9 @@ static int __init omap_dsp_init(void) int err = -ENOMEM; struct omap_dsp_platform_data *pdata = &omap_dsp_pdata; + if (!cpu_is_omap34xx()) + return 0; + pdata->phys_mempool_base = omap_dsp_get_mempool_base(); if (pdata->phys_mempool_base) { @@ -115,6 +122,9 @@ module_init(omap_dsp_init); static void __exit omap_dsp_exit(void) { + if (!cpu_is_omap34xx()) + return; + platform_device_unregister(omap_dsp_pdev); } module_exit(omap_dsp_exit); -- cgit v1.2.3 From 68e2eb533ef84197d6a60d23f45070cddcf51753 Mon Sep 17 00:00:00 2001 From: Guido Martínez Date: Wed, 2 Jul 2014 10:35:18 -0300 Subject: ARM: OMAP2+: Make GPMC skip disabled devices MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Currently, child nodes of the gpmc node are iterated and probed regardless of their 'status' property. This means adding 'status = "disabled";' has no effect. This patch changes the iteration to only probe nodes marked as available. Signed-off-by: Guido Martínez Tested-by: Pekon Gupta Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/gpmc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c index 2c0c2816900f..8bc13380f0a0 100644 --- a/arch/arm/mach-omap2/gpmc.c +++ b/arch/arm/mach-omap2/gpmc.c @@ -1615,7 +1615,7 @@ static int gpmc_probe_dt(struct platform_device *pdev) return ret; } - for_each_child_of_node(pdev->dev.of_node, child) { + for_each_available_child_of_node(pdev->dev.of_node, child) { if (!child->name) continue; -- cgit v1.2.3 From 90571d856a01bb2d4eaa6339bcd7c28d9cb4bc59 Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Thu, 3 Jul 2014 12:51:22 +0300 Subject: ARM: dts: am335x-evm: Enable the McASP FIFO for audio The use of FIFO in McASP can reduce the risk of audio under/overrun and lowers the load on the memories since the DMA will operate in bursts. Signed-off-by: Peter Ujfalusi Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/am335x-evm.dts | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts index ecb267767cf5..e2156a583de7 100644 --- a/arch/arm/boot/dts/am335x-evm.dts +++ b/arch/arm/boot/dts/am335x-evm.dts @@ -529,8 +529,8 @@ serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */ 0 0 1 2 >; - tx-num-evt = <1>; - rx-num-evt = <1>; + tx-num-evt = <32>; + rx-num-evt = <32>; }; &tps { -- cgit v1.2.3 From 6f2f52b5960d090e81db59f4682cea7463bfd7cd Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Thu, 3 Jul 2014 12:51:23 +0300 Subject: ARM: dts: am335x-evmsk: Enable the McASP FIFO for audio The use of FIFO in McASP can reduce the risk of audio under/overrun and lowers the load on the memories since the DMA will operate in bursts. Signed-off-by: Peter Ujfalusi Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/am335x-evmsk.dts | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/am335x-evmsk.dts b/arch/arm/boot/dts/am335x-evmsk.dts index ab9a34ce524c..80a3b215e7d6 100644 --- a/arch/arm/boot/dts/am335x-evmsk.dts +++ b/arch/arm/boot/dts/am335x-evmsk.dts @@ -560,8 +560,8 @@ serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */ 0 0 1 2 >; - tx-num-evt = <1>; - rx-num-evt = <1>; + tx-num-evt = <32>; + rx-num-evt = <32>; }; &tscadc { -- cgit v1.2.3 From 24faebd641ba75ccbbbb6d8f9131a32881e3dcd2 Mon Sep 17 00:00:00 2001 From: Enric Balletbo i Serra Date: Wed, 25 Jun 2014 13:42:05 +0200 Subject: ARM: dts: Fix TI CPSW Phy mode selection on IGEP COM AQUILA. As this board use external clock for RMII interface we should specify 'rmii' phy mode and 'rmii-clock-ext' to make ethernet working. Signed-off-by: Enric Balletbo i Serra Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/am335x-igep0033.dtsi | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/am335x-igep0033.dtsi b/arch/arm/boot/dts/am335x-igep0033.dtsi index 8a0a72dc7dd7..a1a0cc5eb35c 100644 --- a/arch/arm/boot/dts/am335x-igep0033.dtsi +++ b/arch/arm/boot/dts/am335x-igep0033.dtsi @@ -105,10 +105,16 @@ &cpsw_emac0 { phy_id = <&davinci_mdio>, <0>; + phy-mode = "rmii"; }; &cpsw_emac1 { phy_id = <&davinci_mdio>, <1>; + phy-mode = "rmii"; +}; + +&phy_sel { + rmii-clock-ext; }; &elm { -- cgit v1.2.3 From 9a2c33a422d60e8e55c5aff6752522dc39993b16 Mon Sep 17 00:00:00 2001 From: Russell King Date: Mon, 7 Jul 2014 13:53:03 +0100 Subject: ARM: l2c: fix revision checking The revision checking in l2c310_enable() was not correct; we were masking the part number rather than the revision number. Fix this to use the correct macro. Fixes: 4374d64933b1 ("ARM: l2c: add automatic enable of early BRESP") Signed-off-by: Russell King --- arch/arm/mm/cache-l2x0.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/mm/cache-l2x0.c b/arch/arm/mm/cache-l2x0.c index 076172b69422..7c3fb41a462e 100644 --- a/arch/arm/mm/cache-l2x0.c +++ b/arch/arm/mm/cache-l2x0.c @@ -664,7 +664,7 @@ static int l2c310_cpu_enable_flz(struct notifier_block *nb, unsigned long act, v static void __init l2c310_enable(void __iomem *base, u32 aux, unsigned num_lock) { - unsigned rev = readl_relaxed(base + L2X0_CACHE_ID) & L2X0_CACHE_ID_PART_MASK; + unsigned rev = readl_relaxed(base + L2X0_CACHE_ID) & L2X0_CACHE_ID_RTL_MASK; bool cortex_a9 = read_cpuid_part_number() == ARM_CPU_PART_CORTEX_A9; if (rev >= L310_CACHE_ID_RTL_R2P0) { -- cgit v1.2.3 From 35e75645f16c86918f26df1bfc2c24ad8ebb5a17 Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Tue, 8 Jul 2014 08:03:49 +0900 Subject: ARM: EXYNOS: Update secondary boot addr for secure mode Almost all Exynos-series of SoCs that run in secure mode don't need additional offset for every CPU, with Exynos4412 being the only exception. Tested on Origen-Quad (Exynos4412) and Arndale-Octa (Exynos5420). While at it, fix the coding style (space around *). Signed-off-by: Sachin Kamat Signed-off-by: Tushar Behera Tested-by: Andreas Faerber Signed-off-by: Kukjin Kim --- arch/arm/mach-exynos/firmware.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-exynos/firmware.c b/arch/arm/mach-exynos/firmware.c index eb91d2350f8c..e8797bb78871 100644 --- a/arch/arm/mach-exynos/firmware.c +++ b/arch/arm/mach-exynos/firmware.c @@ -57,8 +57,13 @@ static int exynos_set_cpu_boot_addr(int cpu, unsigned long boot_addr) boot_reg = sysram_ns_base_addr + 0x1c; - if (!soc_is_exynos4212() && !soc_is_exynos3250()) - boot_reg += 4*cpu; + /* + * Almost all Exynos-series of SoCs that run in secure mode don't need + * additional offset for every CPU, with Exynos4412 being the only + * exception. + */ + if (soc_is_exynos4412()) + boot_reg += 4 * cpu; __raw_writel(boot_addr, boot_reg); return 0; -- cgit v1.2.3 From be0b420ad6123e587738a67a9eff3ec213a57604 Mon Sep 17 00:00:00 2001 From: Tushar Behera Date: Tue, 8 Jul 2014 08:31:41 +0900 Subject: ARM: dts: Update the parent for Audss clocks in Exynos5420 Currently CLK_FOUT_EPLL was set as one of the parents of AUDSS mux. As per the user manual, it should be CLK_MAU_EPLL. The problem surfaced when the bootloader in Peach-pit board set the EPLL clock as the parent of AUDSS mux. While booting the kernel, we used to get a system hang during late boot if CLK_MAU_EPLL was disabled. Signed-off-by: Tushar Behera Signed-off-by: Shaik Ameer Basha Reported-by: Kevin Hilman Tested-by: Javier Martinez Canillas Tested-by: Doug Anderson Signed-off-by: Kukjin Kim --- arch/arm/boot/dts/exynos5420.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi index e38532271ef9..79e9119d3f8d 100644 --- a/arch/arm/boot/dts/exynos5420.dtsi +++ b/arch/arm/boot/dts/exynos5420.dtsi @@ -167,7 +167,7 @@ compatible = "samsung,exynos5420-audss-clock"; reg = <0x03810000 0x0C>; #clock-cells = <1>; - clocks = <&clock CLK_FIN_PLL>, <&clock CLK_FOUT_EPLL>, + clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MAU_EPLL>, <&clock CLK_SCLK_MAUDIO0>, <&clock CLK_SCLK_MAUPCM0>; clock-names = "pll_ref", "pll_in", "sclk_audio", "sclk_pcm_in"; }; -- cgit v1.2.3 From 63288b721a80fb58c00cd47e61a90bc8b33ba588 Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Mon, 7 Jul 2014 10:53:51 +0800 Subject: ARM: imx: fix shared gate clock Let's say clock A and B are two gate clocks that share the same register bit in hardware. Therefore they are registered as shared gate clocks with imx_clk_gate2_shared(). In a scenario that only clock A is enabled by clk_enable(A) while B is not used, the shared gate will be unexpectedly disabled in hardware. It happens because clk_enable(A) increments the share_count from 0 to 1, while clock B is unused to clock core, and therefore the core function will just disable B by calling clk->ops->disable() directly. The consequence of that call is share_count is decremented to 0 and the gate is disabled in hardware, even though clock A is still in use. The patch fixes the issue by initializing the share_count per hardware state and returns enable state per share_count from .is_enabled() hook, in case it's a shared gate. While at it, add a check in clk_gate2_disable() to ensure it's never called with a zero share_count. Reported-by: Fabio Estevam Fixes: f9f28cdf2167 ("ARM: imx: add shared gate clock support") Signed-off-by: Shawn Guo Tested-by: Fabio Estevam Signed-off-by: Olof Johansson --- arch/arm/mach-imx/clk-gate2.c | 31 +++++++++++++++++++++++-------- 1 file changed, 23 insertions(+), 8 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-imx/clk-gate2.c b/arch/arm/mach-imx/clk-gate2.c index 4ba587da89d2..84acdfd1d715 100644 --- a/arch/arm/mach-imx/clk-gate2.c +++ b/arch/arm/mach-imx/clk-gate2.c @@ -67,8 +67,12 @@ static void clk_gate2_disable(struct clk_hw *hw) spin_lock_irqsave(gate->lock, flags); - if (gate->share_count && --(*gate->share_count) > 0) - goto out; + if (gate->share_count) { + if (WARN_ON(*gate->share_count == 0)) + goto out; + else if (--(*gate->share_count) > 0) + goto out; + } reg = readl(gate->reg); reg &= ~(3 << gate->bit_idx); @@ -78,19 +82,26 @@ out: spin_unlock_irqrestore(gate->lock, flags); } -static int clk_gate2_is_enabled(struct clk_hw *hw) +static int clk_gate2_reg_is_enabled(void __iomem *reg, u8 bit_idx) { - u32 reg; - struct clk_gate2 *gate = to_clk_gate2(hw); + u32 val = readl(reg); - reg = readl(gate->reg); - - if (((reg >> gate->bit_idx) & 1) == 1) + if (((val >> bit_idx) & 1) == 1) return 1; return 0; } +static int clk_gate2_is_enabled(struct clk_hw *hw) +{ + struct clk_gate2 *gate = to_clk_gate2(hw); + + if (gate->share_count) + return !!(*gate->share_count); + else + return clk_gate2_reg_is_enabled(gate->reg, gate->bit_idx); +} + static struct clk_ops clk_gate2_ops = { .enable = clk_gate2_enable, .disable = clk_gate2_disable, @@ -116,6 +127,10 @@ struct clk *clk_register_gate2(struct device *dev, const char *name, gate->bit_idx = bit_idx; gate->flags = clk_gate2_flags; gate->lock = lock; + + /* Initialize share_count per hardware state */ + if (share_count) + *share_count = clk_gate2_reg_is_enabled(reg, bit_idx) ? 1 : 0; gate->share_count = share_count; init.name = name; -- cgit v1.2.3 From 1d29a0722f6c38f79785c9ffb911730598de84e2 Mon Sep 17 00:00:00 2001 From: Jyri Sarha Date: Thu, 26 Jun 2014 22:20:52 +0300 Subject: ARM: OMAP2+: Remove non working OMAP HDMI audio initialization This code is not working currently and it can be removed. There is a conflict in sharing resources with the actual HDMI driver and with the ASoC HDMI audio DAI driver. Signed-off-by: Jyri Sarha Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/devices.c | 28 ---------------------------- 1 file changed, 28 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c index 592ba0a0ecf3..b6f8f348296e 100644 --- a/arch/arm/mach-omap2/devices.c +++ b/arch/arm/mach-omap2/devices.c @@ -297,33 +297,6 @@ static void omap_init_audio(void) static inline void omap_init_audio(void) {} #endif -#if defined(CONFIG_SND_OMAP_SOC_OMAP_HDMI) || \ - defined(CONFIG_SND_OMAP_SOC_OMAP_HDMI_MODULE) - -static struct platform_device omap_hdmi_audio = { - .name = "omap-hdmi-audio", - .id = -1, -}; - -static void __init omap_init_hdmi_audio(void) -{ - struct omap_hwmod *oh; - struct platform_device *pdev; - - oh = omap_hwmod_lookup("dss_hdmi"); - if (!oh) - return; - - pdev = omap_device_build("omap-hdmi-audio-dai", -1, oh, NULL, 0); - WARN(IS_ERR(pdev), - "Can't build omap_device for omap-hdmi-audio-dai.\n"); - - platform_device_register(&omap_hdmi_audio); -} -#else -static inline void omap_init_hdmi_audio(void) {} -#endif - #if defined(CONFIG_SPI_OMAP24XX) || defined(CONFIG_SPI_OMAP24XX_MODULE) #include @@ -459,7 +432,6 @@ static int __init omap2_init_devices(void) */ omap_init_audio(); omap_init_camera(); - omap_init_hdmi_audio(); omap_init_mbox(); /* If dtb is there, the devices will be created dynamically */ if (!of_have_populated_dt()) { -- cgit v1.2.3 From c760569d0e9c06b39dd19e82bff0b704d90a73b7 Mon Sep 17 00:00:00 2001 From: Prathyush K Date: Fri, 11 Jul 2014 08:02:15 +0900 Subject: ARM: EXYNOS: Add support for clock handling in power domain While powering on/off a local powerdomain in exynos5 chipsets, the input clocks to each device gets modified. This behaviour is based on the SYSCLK_SYS_PWR_REG registers. E.g. SYSCLK_MFC_SYS_PWR_REG = 0x0, the parent of input clock to MFC (aclk333) gets modified to oscclk = 0x1, no change in clocks. The recommended value of SYSCLK_SYS_PWR_REG before power gating any domain is 0x0. So we must also restore the clocks while powering on a domain everytime. This patch adds the framework for getting the required mux and parent clocks through a power domain device node. With this patch, while powering off a domain, parent is set to oscclk and while powering back on, its re-set to the correct parent which is as per the recommended pd on/off sequence. Signed-off-by: Prathyush K Signed-off-by: Andrew Bresticker Signed-off-by: Arun Kumar K Signed-off-by: Shaik Ameer Basha Reviewed-by: Tomasz Figa Signed-off-by: Kukjin Kim --- .../bindings/arm/exynos/power_domain.txt | 20 +++++++ arch/arm/mach-exynos/pm_domains.c | 61 +++++++++++++++++++++- 2 files changed, 80 insertions(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/Documentation/devicetree/bindings/arm/exynos/power_domain.txt b/Documentation/devicetree/bindings/arm/exynos/power_domain.txt index 5216b419016a..8b4f7b7fe88b 100644 --- a/Documentation/devicetree/bindings/arm/exynos/power_domain.txt +++ b/Documentation/devicetree/bindings/arm/exynos/power_domain.txt @@ -9,6 +9,18 @@ Required Properties: - reg: physical base address of the controller and length of memory mapped region. +Optional Properties: +- clocks: List of clock handles. The parent clocks of the input clocks to the + devices in this power domain are set to oscclk before power gating + and restored back after powering on a domain. This is required for + all domains which are powered on and off and not required for unused + domains. +- clock-names: The following clocks can be specified: + - oscclk: Oscillator clock. + - pclkN, clkN: Pairs of parent of input clock and input clock to the + devices in this power domain. Maximum of 4 pairs (N = 0 to 3) + are supported currently. + Node of a device using power domains must have a samsung,power-domain property defined with a phandle to respective power domain. @@ -19,6 +31,14 @@ Example: reg = <0x10023C00 0x10>; }; + mfc_pd: power-domain@10044060 { + compatible = "samsung,exynos4210-pd"; + reg = <0x10044060 0x20>; + clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MOUT_SW_ACLK333>, + <&clock CLK_MOUT_USER_ACLK333>; + clock-names = "oscclk", "pclk0", "clk0"; + }; + Example of the node using power domain: node { diff --git a/arch/arm/mach-exynos/pm_domains.c b/arch/arm/mach-exynos/pm_domains.c index fe6570ebbdde..797cb134bfff 100644 --- a/arch/arm/mach-exynos/pm_domains.c +++ b/arch/arm/mach-exynos/pm_domains.c @@ -17,6 +17,7 @@ #include #include #include +#include #include #include #include @@ -24,6 +25,8 @@ #include "regs-pmu.h" +#define MAX_CLK_PER_DOMAIN 4 + /* * Exynos specific wrapper around the generic power domain */ @@ -32,6 +35,9 @@ struct exynos_pm_domain { char const *name; bool is_off; struct generic_pm_domain pd; + struct clk *oscclk; + struct clk *clk[MAX_CLK_PER_DOMAIN]; + struct clk *pclk[MAX_CLK_PER_DOMAIN]; }; static int exynos_pd_power(struct generic_pm_domain *domain, bool power_on) @@ -44,6 +50,19 @@ static int exynos_pd_power(struct generic_pm_domain *domain, bool power_on) pd = container_of(domain, struct exynos_pm_domain, pd); base = pd->base; + /* Set oscclk before powering off a domain*/ + if (!power_on) { + int i; + + for (i = 0; i < MAX_CLK_PER_DOMAIN; i++) { + if (IS_ERR(pd->clk[i])) + break; + if (clk_set_parent(pd->clk[i], pd->oscclk)) + pr_err("%s: error setting oscclk as parent to clock %d\n", + pd->name, i); + } + } + pwr = power_on ? S5P_INT_LOCAL_PWR_EN : 0; __raw_writel(pwr, base); @@ -60,6 +79,20 @@ static int exynos_pd_power(struct generic_pm_domain *domain, bool power_on) cpu_relax(); usleep_range(80, 100); } + + /* Restore clocks after powering on a domain*/ + if (power_on) { + int i; + + for (i = 0; i < MAX_CLK_PER_DOMAIN; i++) { + if (IS_ERR(pd->clk[i])) + break; + if (clk_set_parent(pd->clk[i], pd->pclk[i])) + pr_err("%s: error setting parent to clock%d\n", + pd->name, i); + } + } + return 0; } @@ -152,9 +185,11 @@ static __init int exynos4_pm_init_power_domain(void) for_each_compatible_node(np, NULL, "samsung,exynos4210-pd") { struct exynos_pm_domain *pd; - int on; + int on, i; + struct device *dev; pdev = of_find_device_by_node(np); + dev = &pdev->dev; pd = kzalloc(sizeof(*pd), GFP_KERNEL); if (!pd) { @@ -170,6 +205,30 @@ static __init int exynos4_pm_init_power_domain(void) pd->pd.power_on = exynos_pd_power_on; pd->pd.of_node = np; + pd->oscclk = clk_get(dev, "oscclk"); + if (IS_ERR(pd->oscclk)) + goto no_clk; + + for (i = 0; i < MAX_CLK_PER_DOMAIN; i++) { + char clk_name[8]; + + snprintf(clk_name, sizeof(clk_name), "clk%d", i); + pd->clk[i] = clk_get(dev, clk_name); + if (IS_ERR(pd->clk[i])) + break; + snprintf(clk_name, sizeof(clk_name), "pclk%d", i); + pd->pclk[i] = clk_get(dev, clk_name); + if (IS_ERR(pd->pclk[i])) { + clk_put(pd->clk[i]); + pd->clk[i] = ERR_PTR(-EINVAL); + break; + } + } + + if (IS_ERR(pd->clk[0])) + clk_put(pd->oscclk); + +no_clk: platform_set_drvdata(pdev, pd); on = __raw_readl(pd->base + 0x4) & S5P_INT_LOCAL_PWR_EN; -- cgit v1.2.3 From cacaeb829385ef57b267c8e30308360a89994c1f Mon Sep 17 00:00:00 2001 From: Arun Kumar K Date: Fri, 11 Jul 2014 08:04:03 +0900 Subject: ARM: dts: Add clock property for mfc_pd in exynos5420 Adding the optional clock property for the mfc_pd for handling the re-parenting while pd on/off. Signed-off-by: Arun Kumar K Signed-off-by: Shaik Ameer Basha Reviewed-by: Tomasz Figa Signed-off-by: Kukjin Kim --- arch/arm/boot/dts/exynos5420.dtsi | 3 +++ 1 file changed, 3 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi index 79e9119d3f8d..15957227ffda 100644 --- a/arch/arm/boot/dts/exynos5420.dtsi +++ b/arch/arm/boot/dts/exynos5420.dtsi @@ -260,6 +260,9 @@ mfc_pd: power-domain@10044060 { compatible = "samsung,exynos4210-pd"; reg = <0x10044060 0x20>; + clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MOUT_SW_ACLK333>, + <&clock CLK_MOUT_USER_ACLK333>; + clock-names = "oscclk", "pclk0", "clk0"; }; disp_pd: power-domain@100440C0 { -- cgit v1.2.3 From bed7118988ef48063c72f67cc2701c72663b3870 Mon Sep 17 00:00:00 2001 From: Tomasz Figa Date: Fri, 11 Jul 2014 08:15:32 +0900 Subject: ARM: EXYNOS: Register cpuidle device only on exynos4210 and 5250 Currently, the exynos cpuidle driver works correctly only on exynos4210 and 5250. Trying to use it with just one CPU online on any other exynos SoCs will lead to system failure, due to unsupported AFTR mode on other SoCs. This patch fixes the problem by registering the driver only on supported SoCs and letting others simply use default WFI mode until support for them is added. Signed-off-by: Tomasz Figa Signed-off-by: Kukjin Kim --- arch/arm/mach-exynos/exynos.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-exynos/exynos.c b/arch/arm/mach-exynos/exynos.c index f38cf7c110cc..176bbf574d45 100644 --- a/arch/arm/mach-exynos/exynos.c +++ b/arch/arm/mach-exynos/exynos.c @@ -173,10 +173,8 @@ static struct platform_device exynos_cpuidle = { void __init exynos_cpuidle_init(void) { - if (soc_is_exynos5440()) - return; - - platform_device_register(&exynos_cpuidle); + if (soc_is_exynos4210() || soc_is_exynos5250()) + platform_device_register(&exynos_cpuidle); } void __init exynos_cpufreq_init(void) -- cgit v1.2.3 From 363d4ddc17320ad0906778924d40ba5955ccf194 Mon Sep 17 00:00:00 2001 From: Bo Shen Date: Fri, 11 Jul 2014 18:34:56 +0200 Subject: ARM: at91: at91sam9x5: add clocks for usb device Add clocks for usb device, or else switch to CCF, the gadget won't work. Reported-by: Jiri Prchal Signed-off-by: Bo Shen Acked-by: Alexandre Belloni Tested-by: Jiri Prchal Signed-off-by: Nicolas Ferre Signed-off-by: Olof Johansson --- arch/arm/boot/dts/at91sam9x5.dtsi | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi index d6133f497207..2ebc42140ea6 100644 --- a/arch/arm/boot/dts/at91sam9x5.dtsi +++ b/arch/arm/boot/dts/at91sam9x5.dtsi @@ -1045,6 +1045,8 @@ reg = <0x00500000 0x80000 0xf803c000 0x400>; interrupts = <23 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&usb>, <&udphs_clk>; + clock-names = "hclk", "pclk"; status = "disabled"; ep0 { -- cgit v1.2.3