From 0840a47ee85fdcc883b535ba12a849bfc2078523 Mon Sep 17 00:00:00 2001 From: Vladimir Oltean Date: Thu, 14 Nov 2019 12:02:53 +0100 Subject: ARM: dts: ls1021a-tsn: Use interrupts for the SGMII PHYs On the LS1021A-TSN board, the 2 Atheros AR8031 PHYs for eth0 and eth1 have interrupt lines connected to the shared IRQ2_B LS1021A pin. Switching to interrupts offloads the PHY library from the task of polling the MDIO status and AN registers (1, 4, 5) every second. Unfortunately, the BCM5464R quad PHY connected to the switch does not appear to have an interrupt line routed to the SoC. Signed-off-by: Vladimir Oltean Signed-off-by: Rasmus Villemoes Reviewed-by: Andrew Lunn Signed-off-by: Shawn Guo --- arch/arm/boot/dts/ls1021a-tsn.dts | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/ls1021a-tsn.dts b/arch/arm/boot/dts/ls1021a-tsn.dts index 5b7689094b70..9d8f0c2a8aba 100644 --- a/arch/arm/boot/dts/ls1021a-tsn.dts +++ b/arch/arm/boot/dts/ls1021a-tsn.dts @@ -203,11 +203,15 @@ /* AR8031 */ sgmii_phy1: ethernet-phy@1 { reg = <0x1>; + /* SGMII1_PHY_INT_B: connected to IRQ2, active low */ + interrupts-extended = <&extirq 2 IRQ_TYPE_LEVEL_LOW>; }; /* AR8031 */ sgmii_phy2: ethernet-phy@2 { reg = <0x2>; + /* SGMII2_PHY_INT_B: connected to IRQ2, active low */ + interrupts-extended = <&extirq 2 IRQ_TYPE_LEVEL_LOW>; }; /* BCM5464 quad PHY */ -- cgit v1.2.3