From 25501d8d3ab3f5dc83799731dfb8ebaf03ca5000 Mon Sep 17 00:00:00 2001 From: Vladimir Oltean Date: Wed, 20 Oct 2021 14:36:13 +0300 Subject: arm64: dts: lx2160abluebox3: update RGMII delays for sja1105 switch In the new behavior, the sja1105 driver expects there to be explicit RGMII delays present on the fixed-link ports, otherwise it will complain that it falls back to legacy behavior, which is to apply RGMII delays incorrectly derived from the phy-mode string. In this case, the legacy behavior of the driver is to apply both RX and TX delays. To preserve that, add explicit 2 nanosecond delays, which are identical with what the driver used to add (a 90 degree phase shift). The delays from the phy-mode are ignored by new kernels (it's still RGMII as long as it's "rgmii*" something), and the explicit {rx,tx}-internal-delay-ps properties are ignored by old kernels, so the change works both ways. Signed-off-by: Vladimir Oltean Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/fsl-lx2160a-bluebox3.dts | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-bluebox3.dts b/arch/arm64/boot/dts/freescale/fsl-lx2160a-bluebox3.dts index b21be03da0af..042c486bdda2 100644 --- a/arch/arm64/boot/dts/freescale/fsl-lx2160a-bluebox3.dts +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-bluebox3.dts @@ -386,6 +386,8 @@ reg = <2>; ethernet = <&dpmac17>; phy-mode = "rgmii-id"; + rx-internal-delay-ps = <2000>; + tx-internal-delay-ps = <2000>; fixed-link { speed = <1000>; @@ -529,6 +531,8 @@ reg = <2>; ethernet = <&dpmac18>; phy-mode = "rgmii-id"; + rx-internal-delay-ps = <2000>; + tx-internal-delay-ps = <2000>; fixed-link { speed = <1000>; -- cgit v1.2.3