From e9cabfd046d55d05f11d05fccc4019aa4bad29c6 Mon Sep 17 00:00:00 2001 From: Biao Huang Date: Wed, 9 Oct 2019 15:10:22 +0800 Subject: arm64: dts: mt2712: add ethernet device node This patch add device node for mt2712 ethernet. Signed-off-by: Biao Huang Signed-off-by: Matthias Brugger --- arch/arm64/boot/dts/mediatek/mt2712-evb.dts | 74 +++++++++++++++++++++++++++++ arch/arm64/boot/dts/mediatek/mt2712e.dtsi | 65 +++++++++++++++++++++++++ 2 files changed, 139 insertions(+) (limited to 'arch/arm64/boot') diff --git a/arch/arm64/boot/dts/mediatek/mt2712-evb.dts b/arch/arm64/boot/dts/mediatek/mt2712-evb.dts index 2b91daf5c1a6..7d369fdd3117 100644 --- a/arch/arm64/boot/dts/mediatek/mt2712-evb.dts +++ b/arch/arm64/boot/dts/mediatek/mt2712-evb.dts @@ -105,7 +105,81 @@ proc-supply = <&cpus_fixed_vproc1>; }; +ð { + phy-mode ="rgmii-rxid"; + phy-handle = <ðernet_phy0>; + mediatek,tx-delay-ps = <1530>; + snps,reset-gpio = <&pio 87 GPIO_ACTIVE_LOW>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <ð_default>; + pinctrl-1 = <ð_sleep>; + status = "okay"; + + mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + ethernet_phy0: ethernet-phy@5 { + compatible = "ethernet-phy-id0243.0d90"; + reg = <0x5>; + }; + }; +}; + &pio { + eth_default: eth_default { + tx_pins { + pinmux = , + , + , + , + , + ; + drive-strength = ; + }; + rx_pins { + pinmux = , + , + , + , + , + ; + input-enable; + }; + mdio_pins { + pinmux = , + ; + drive-strength = ; + input-enable; + }; + }; + + eth_sleep: eth_sleep { + tx_pins { + pinmux = , + , + , + , + , + ; + }; + rx_pins { + pinmux = , + , + , + , + , + ; + input-disable; + }; + mdio_pins { + pinmux = , + ; + input-disable; + bias-disable; + }; + }; + usb0_id_pins_float: usb0_iddig { pins_iddig { pinmux = ; diff --git a/arch/arm64/boot/dts/mediatek/mt2712e.dtsi b/arch/arm64/boot/dts/mediatek/mt2712e.dtsi index f29ade61931d..221ac9171396 100644 --- a/arch/arm64/boot/dts/mediatek/mt2712e.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt2712e.dtsi @@ -638,6 +638,71 @@ status = "disabled"; }; + stmmac_axi_setup: stmmac-axi-config { + snps,wr_osr_lmt = <0x7>; + snps,rd_osr_lmt = <0x7>; + snps,blen = <0 0 0 0 16 8 4>; + }; + + mtl_rx_setup: rx-queues-config { + snps,rx-queues-to-use = <1>; + snps,rx-sched-sp; + queue0 { + snps,dcb-algorithm; + snps,map-to-dma-channel = <0x0>; + snps,priority = <0x0>; + }; + }; + + mtl_tx_setup: tx-queues-config { + snps,tx-queues-to-use = <3>; + snps,tx-sched-wrr; + queue0 { + snps,weight = <0x10>; + snps,dcb-algorithm; + snps,priority = <0x0>; + }; + queue1 { + snps,weight = <0x11>; + snps,dcb-algorithm; + snps,priority = <0x1>; + }; + queue2 { + snps,weight = <0x12>; + snps,dcb-algorithm; + snps,priority = <0x2>; + }; + }; + + eth: ethernet@1101c000 { + compatible = "mediatek,mt2712-gmac"; + reg = <0 0x1101c000 0 0x1300>; + interrupts = ; + interrupt-names = "macirq"; + mac-address = [00 55 7b b5 7d f7]; + clock-names = "axi", + "apb", + "mac_main", + "ptp_ref"; + clocks = <&pericfg CLK_PERI_GMAC>, + <&pericfg CLK_PERI_GMAC_PCLK>, + <&topckgen CLK_TOP_ETHER_125M_SEL>, + <&topckgen CLK_TOP_ETHER_50M_SEL>; + assigned-clocks = <&topckgen CLK_TOP_ETHER_125M_SEL>, + <&topckgen CLK_TOP_ETHER_50M_SEL>; + assigned-clock-parents = <&topckgen CLK_TOP_ETHERPLL_125M>, + <&topckgen CLK_TOP_APLL1_D3>; + power-domains = <&scpsys MT2712_POWER_DOMAIN_AUDIO>; + mediatek,pericfg = <&pericfg>; + snps,axi-config = <&stmmac_axi_setup>; + snps,mtl-rx-config = <&mtl_rx_setup>; + snps,mtl-tx-config = <&mtl_tx_setup>; + snps,txpbl = <1>; + snps,rxpbl = <1>; + clk_csr = <0>; + status = "disabled"; + }; + mmc0: mmc@11230000 { compatible = "mediatek,mt2712-mmc"; reg = <0 0x11230000 0 0x1000>; -- cgit v1.2.3