From b955153bfa68d7a9fa2be40bb606cf9578b66511 Mon Sep 17 00:00:00 2001 From: Russell King Date: Wed, 31 Aug 2016 08:49:45 +0100 Subject: ARM: sa1100/assabet: add BCR/BSR GPIO driver Add a GPIO driver for the board control register/board status register for the sa1100/assabet platform. This allows us to transition a range of drivers to use the gpiod APIs rather than the platform private ASSABET_BCR_* interfaces. Signed-off-by: Russell King --- arch/arm/mach-sa1100/assabet.c | 71 ++++++++++++++++++++++++++++++++---------- 1 file changed, 54 insertions(+), 17 deletions(-) (limited to 'arch/arm/mach-sa1100/assabet.c') diff --git a/arch/arm/mach-sa1100/assabet.c b/arch/arm/mach-sa1100/assabet.c index d28ecb9ef172..f68241d995f2 100644 --- a/arch/arm/mach-sa1100/assabet.c +++ b/arch/arm/mach-sa1100/assabet.c @@ -13,6 +13,7 @@ #include #include #include +#include #include #include #include @@ -61,20 +62,45 @@ unsigned long SCR_value = ASSABET_SCR_INIT; EXPORT_SYMBOL(SCR_value); -static unsigned long BCR_value = ASSABET_BCR_DB1110; +static struct gpio_chip *assabet_bcr_gc; + +static const char *assabet_names[] = { + "cf_pwr", "cf_gfx_reset", "nsoft_reset", "irda_fsel", + "irda_md0", "irda_md1", "stereo_loopback", "ncf_bus_on", + "audio_pwr_on", "light_pwr_on", "lcd16data", "lcd_pwr_on", + "rs232_on", "nred_led", "ngreen_led", "vib_on", + "com_dtr", "com_rts", "radio_wake_mod", "i2c_enab", + "tvir_enab", "qmute", "radio_pwr_on", "spkr_off", + "rs232_valid", "com_dcd", "com_cts", "com_dsr", + "radio_cts", "radio_dsr", "radio_dcd", "radio_ri", +}; +/* The old deprecated interface */ void ASSABET_BCR_frob(unsigned int mask, unsigned int val) { - unsigned long flags; + unsigned long m = mask, v = val; - local_irq_save(flags); - BCR_value = (BCR_value & ~mask) | val; - ASSABET_BCR = BCR_value; - local_irq_restore(flags); + assabet_bcr_gc->set_multiple(assabet_bcr_gc, &m, &v); } - EXPORT_SYMBOL(ASSABET_BCR_frob); +static int __init assabet_init_gpio(void __iomem *reg, u32 def_val) +{ + struct gpio_chip *gc; + + writel_relaxed(def_val, reg); + + gc = gpio_reg_init(NULL, reg, -1, 32, "assabet", 0xff000000, def_val, + assabet_names, NULL, NULL); + + if (IS_ERR(gc)) + return PTR_ERR(gc); + + assabet_bcr_gc = gc; + + return gc->base; +} + /* * The codec reset goes to three devices, so we need to release * the rest when any one of these requests it. However, that @@ -146,7 +172,7 @@ static void adv7171_write(unsigned reg, unsigned val) unsigned gpdr = GPDR; unsigned gplr = GPLR; - ASSABET_BCR = BCR_value | ASSABET_BCR_AUDIO_ON; + ASSABET_BCR_frob(ASSABET_BCR_AUDIO_ON, ASSABET_BCR_AUDIO_ON); udelay(100); GPCR = SDA | SCK | MOD; /* clear L3 mode to ensure UDA1341 doesn't respond */ @@ -457,14 +483,6 @@ static void __init assabet_init(void) sa11x0_ppc_configure_mcp(); if (machine_has_neponset()) { - /* - * Angel sets this, but other bootloaders may not. - * - * This must precede any driver calls to BCR_set() - * or BCR_clear(). - */ - ASSABET_BCR = BCR_value = ASSABET_BCR_DB1111; - #ifndef CONFIG_ASSABET_NEPONSET printk( "Warning: Neponset detected but full support " "hasn't been configured in the kernel\n" ); @@ -748,12 +766,31 @@ static int __init assabet_leds_init(void) fs_initcall(assabet_leds_init); #endif +void __init assabet_init_irq(void) +{ + u32 def_val; + + sa1100_init_irq(); + + if (machine_has_neponset()) + def_val = ASSABET_BCR_DB1111; + else + def_val = ASSABET_BCR_DB1110; + + /* + * Angel sets this, but other bootloaders may not. + * + * This must precede any driver calls to BCR_set() or BCR_clear(). + */ + assabet_init_gpio((void *)&ASSABET_BCR, def_val); +} + MACHINE_START(ASSABET, "Intel-Assabet") .atag_offset = 0x100, .fixup = fixup_assabet, .map_io = assabet_map_io, .nr_irqs = SA1100_NR_IRQS, - .init_irq = sa1100_init_irq, + .init_irq = assabet_init_irq, .init_time = sa1100_timer_init, .init_machine = assabet_init, .init_late = sa11x0_init_late, -- cgit v1.2.3