From 44773ba170a6f969620221a6d87d03feae5e464f Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Mon, 16 Apr 2018 10:22:01 -0700 Subject: ARM: OMAP2+: Drop unused pm-noop Looks like these functions don't do anything in the mainline kernel so we can just drop it. Note that we must now also remove ir-rx51 pdata as it relies on the dummy platform data that does not do anything. And ir-rx51 is calling a pdata callback that doesn't do anything without checking if it exists first. For configuring device specific minimal latencies, the interface to use is pm_qos_add_request(). For an example, see what was done in commit 9834ffd1ecc3 ("ASoC: omap-mcbsp: Add PM QoS support for McBSP to prevent glitches"). I've added some comments to ir-rx51 so people using it can add pm_qos support and test it. Cc: Ivaylo Dimitrov Cc: Kevin Hilman Cc: Laurent Pinchart Cc: Tomi Valkeinen Acked-by: Mauro Carvalho Chehab Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/Makefile | 1 - arch/arm/mach-omap2/display.c | 7 -- arch/arm/mach-omap2/hsmmc.c | 1 - arch/arm/mach-omap2/i2c.c | 1 - arch/arm/mach-omap2/io.c | 3 - arch/arm/mach-omap2/omap-pm-noop.c | 176 ------------------------------------- arch/arm/mach-omap2/omap-pm.h | 161 --------------------------------- arch/arm/mach-omap2/pdata-quirks.c | 15 ---- arch/arm/mach-omap2/pm-debug.c | 5 -- arch/arm/mach-omap2/pm.c | 10 +-- arch/arm/mach-omap2/timer.c | 1 - 11 files changed, 1 insertion(+), 380 deletions(-) delete mode 100644 arch/arm/mach-omap2/omap-pm-noop.c delete mode 100644 arch/arm/mach-omap2/omap-pm.h (limited to 'arch/arm/mach-omap2') diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index 4603c30fef73..95b64b2940e9 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -78,7 +78,6 @@ endif omap-4-5-pm-common = omap-mpuss-lowpower.o obj-$(CONFIG_ARCH_OMAP4) += $(omap-4-5-pm-common) obj-$(CONFIG_SOC_OMAP5) += $(omap-4-5-pm-common) -obj-$(CONFIG_OMAP_PM_NOOP) += omap-pm-noop.o ifeq ($(CONFIG_PM),y) obj-$(CONFIG_ARCH_OMAP2) += pm24xx.o diff --git a/arch/arm/mach-omap2/display.c b/arch/arm/mach-omap2/display.c index b3f6eb5d04a2..480a2b989908 100644 --- a/arch/arm/mach-omap2/display.c +++ b/arch/arm/mach-omap2/display.c @@ -32,7 +32,6 @@ #include #include "omap_hwmod.h" #include "omap_device.h" -#include "omap-pm.h" #include "common.h" #include "soc.h" @@ -126,11 +125,6 @@ static void omap_dsi_disable_pads(int dsi_id, unsigned lane_mask) omap4_dsi_mux_pads(dsi_id, 0); } -static int omap_dss_set_min_bus_tput(struct device *dev, unsigned long tput) -{ - return omap_pm_set_min_bus_tput(dev, OCP_INITIATOR_AGENT, tput); -} - static enum omapdss_version __init omap_display_get_version(void) { if (cpu_is_omap24xx()) @@ -169,7 +163,6 @@ static int __init omapdss_init_fbdev(void) static struct omap_dss_board_info board_data = { .dsi_enable_pads = omap_dsi_enable_pads, .dsi_disable_pads = omap_dsi_disable_pads, - .set_min_bus_tput = omap_dss_set_min_bus_tput, }; struct device_node *node; int r; diff --git a/arch/arm/mach-omap2/hsmmc.c b/arch/arm/mach-omap2/hsmmc.c index b064066d431c..0103548b0b15 100644 --- a/arch/arm/mach-omap2/hsmmc.c +++ b/arch/arm/mach-omap2/hsmmc.c @@ -18,7 +18,6 @@ #include "soc.h" #include "omap_device.h" -#include "omap-pm.h" #include "hsmmc.h" #include "control.h" diff --git a/arch/arm/mach-omap2/i2c.c b/arch/arm/mach-omap2/i2c.c index 91a21c3923b2..37ff25ee3d89 100644 --- a/arch/arm/mach-omap2/i2c.c +++ b/arch/arm/mach-omap2/i2c.c @@ -22,7 +22,6 @@ #include "soc.h" #include "omap_hwmod.h" #include "omap_device.h" -#include "omap-pm.h" #include "prm.h" #include "common.h" diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c index cf546dfe3b32..6ce60a478409 100644 --- a/arch/arm/mach-omap2/io.c +++ b/arch/arm/mach-omap2/io.c @@ -37,7 +37,6 @@ #include "clock.h" #include "clock2xxx.h" #include "clock3xxx.h" -#include "omap-pm.h" #include "sdrc.h" #include "control.h" #include "serial.h" @@ -421,8 +420,6 @@ static void __init __maybe_unused omap_hwmod_init_postsetup(void) postsetup_state = _HWMOD_STATE_ENABLED; #endif omap_hwmod_for_each(_set_hwmod_postsetup_state, &postsetup_state); - - omap_pm_if_early_init(); } static void __init __maybe_unused omap_common_late_init(void) diff --git a/arch/arm/mach-omap2/omap-pm-noop.c b/arch/arm/mach-omap2/omap-pm-noop.c deleted file mode 100644 index 4ead077ea4e7..000000000000 --- a/arch/arm/mach-omap2/omap-pm-noop.c +++ /dev/null @@ -1,176 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * omap-pm-noop.c - OMAP power management interface - dummy version - * - * This code implements the OMAP power management interface to - * drivers, CPUIdle, CPUFreq, and DSP Bridge. It is strictly for - * debug/demonstration use, as it does nothing but printk() whenever a - * function is called (when DEBUG is defined, below) - * - * Copyright (C) 2008-2009 Texas Instruments, Inc. - * Copyright (C) 2008-2009 Nokia Corporation - * Paul Walmsley - * - * Interface developed by (in alphabetical order): - * Karthik Dasu, Tony Lindgren, Rajendra Nayak, Sakari Poussa, Veeramanikandan - * Raju, Anand Sawant, Igor Stoppa, Paul Walmsley, Richard Woodruff - */ - -#undef DEBUG - -#include -#include -#include -#include - -#include "omap_device.h" -#include "omap-pm.h" - -static bool off_mode_enabled; -static int dummy_context_loss_counter; - -/* - * Device-driver-originated constraints (via board-*.c files) - */ - -int omap_pm_set_max_mpu_wakeup_lat(struct device *dev, long t) -{ - if (!dev || t < -1) { - WARN(1, "OMAP PM: %s: invalid parameter(s)", __func__); - return -EINVAL; - } - - if (t == -1) - pr_debug("OMAP PM: remove max MPU wakeup latency constraint: dev %s\n", - dev_name(dev)); - else - pr_debug("OMAP PM: add max MPU wakeup latency constraint: dev %s, t = %ld usec\n", - dev_name(dev), t); - - /* - * For current Linux, this needs to map the MPU to a - * powerdomain, then go through the list of current max lat - * constraints on the MPU and find the smallest. If - * the latency constraint has changed, the code should - * recompute the state to enter for the next powerdomain - * state. - * - * TI CDP code can call constraint_set here. - */ - - return 0; -} - -int omap_pm_set_min_bus_tput(struct device *dev, u8 agent_id, unsigned long r) -{ - if (!dev || (agent_id != OCP_INITIATOR_AGENT && - agent_id != OCP_TARGET_AGENT)) { - WARN(1, "OMAP PM: %s: invalid parameter(s)", __func__); - return -EINVAL; - } - - if (r == 0) - pr_debug("OMAP PM: remove min bus tput constraint: dev %s for agent_id %d\n", - dev_name(dev), agent_id); - else - pr_debug("OMAP PM: add min bus tput constraint: dev %s for agent_id %d: rate %ld KiB\n", - dev_name(dev), agent_id, r); - - /* - * This code should model the interconnect and compute the - * required clock frequency, convert that to a VDD2 OPP ID, then - * set the VDD2 OPP appropriately. - * - * TI CDP code can call constraint_set here on the VDD2 OPP. - */ - - return 0; -} - -/* - * DSP Bridge-specific constraints - */ - - -/** - * omap_pm_enable_off_mode - notify OMAP PM that off-mode is enabled - * - * Intended for use only by OMAP PM core code to notify this layer - * that off mode has been enabled. - */ -void omap_pm_enable_off_mode(void) -{ - off_mode_enabled = true; -} - -/** - * omap_pm_disable_off_mode - notify OMAP PM that off-mode is disabled - * - * Intended for use only by OMAP PM core code to notify this layer - * that off mode has been disabled. - */ -void omap_pm_disable_off_mode(void) -{ - off_mode_enabled = false; -} - -/* - * Device context loss tracking - */ - -#ifdef CONFIG_ARCH_OMAP2PLUS - -int omap_pm_get_dev_context_loss_count(struct device *dev) -{ - struct platform_device *pdev = to_platform_device(dev); - int count; - - if (WARN_ON(!dev)) - return -ENODEV; - - if (dev->pm_domain == &omap_device_pm_domain) { - count = omap_device_get_context_loss_count(pdev); - } else { - WARN_ONCE(off_mode_enabled, "omap_pm: using dummy context loss counter; device %s should be converted to omap_device", - dev_name(dev)); - - count = dummy_context_loss_counter; - - if (off_mode_enabled) { - count++; - /* - * Context loss count has to be a non-negative value. - * Clear the sign bit to get a value range from 0 to - * INT_MAX. - */ - count &= INT_MAX; - dummy_context_loss_counter = count; - } - } - - pr_debug("OMAP PM: context loss count for dev %s = %d\n", - dev_name(dev), count); - - return count; -} - -#else - -int omap_pm_get_dev_context_loss_count(struct device *dev) -{ - return dummy_context_loss_counter; -} - -#endif - -/* Should be called before clk framework init */ -int __init omap_pm_if_early_init(void) -{ - return 0; -} - -/* Must be called after clock framework is initialized */ -int __init omap_pm_if_init(void) -{ - return 0; -} diff --git a/arch/arm/mach-omap2/omap-pm.h b/arch/arm/mach-omap2/omap-pm.h deleted file mode 100644 index 5ba5df47f91b..000000000000 --- a/arch/arm/mach-omap2/omap-pm.h +++ /dev/null @@ -1,161 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* - * omap-pm.h - OMAP power management interface - * - * Copyright (C) 2008-2010 Texas Instruments, Inc. - * Copyright (C) 2008-2010 Nokia Corporation - * Paul Walmsley - * - * Interface developed by (in alphabetical order): Karthik Dasu, Jouni - * Högander, Tony Lindgren, Rajendra Nayak, Sakari Poussa, - * Veeramanikandan Raju, Anand Sawant, Igor Stoppa, Paul Walmsley, - * Richard Woodruff - */ - -#ifndef ASM_ARM_ARCH_OMAP_OMAP_PM_H -#define ASM_ARM_ARCH_OMAP_OMAP_PM_H - -#include -#include -#include -#include - -/* - * agent_id values for use with omap_pm_set_min_bus_tput(): - * - * OCP_INITIATOR_AGENT is only valid for devices that can act as - * initiators -- it represents the device's L3 interconnect - * connection. OCP_TARGET_AGENT represents the device's L4 - * interconnect connection. - */ -#define OCP_TARGET_AGENT 1 -#define OCP_INITIATOR_AGENT 2 - -/** - * omap_pm_if_early_init - OMAP PM init code called before clock fw init - * @mpu_opp_table: array ptr to struct omap_opp for MPU - * @dsp_opp_table: array ptr to struct omap_opp for DSP - * @l3_opp_table : array ptr to struct omap_opp for CORE - * - * Initialize anything that must be configured before the clock - * framework starts. The "_if_" is to avoid name collisions with the - * PM idle-loop code. - */ -int __init omap_pm_if_early_init(void); - -/** - * omap_pm_if_init - OMAP PM init code called after clock fw init - * - * The main initialization code. OPP tables are passed in here. The - * "_if_" is to avoid name collisions with the PM idle-loop code. - */ -int __init omap_pm_if_init(void); - -/* - * Device-driver-originated constraints (via board-*.c files, platform_data) - */ - - -/** - * omap_pm_set_max_mpu_wakeup_lat - set the maximum MPU wakeup latency - * @dev: struct device * requesting the constraint - * @t: maximum MPU wakeup latency in microseconds - * - * Request that the maximum interrupt latency for the MPU to be no - * greater than @t microseconds. "Interrupt latency" in this case is - * defined as the elapsed time from the occurrence of a hardware or - * timer interrupt to the time when the device driver's interrupt - * service routine has been entered by the MPU. - * - * It is intended that underlying PM code will use this information to - * determine what power state to put the MPU powerdomain into, and - * possibly the CORE powerdomain as well, since interrupt handling - * code currently runs from SDRAM. Advanced PM or board*.c code may - * also configure interrupt controller priorities, OCP bus priorities, - * CPU speed(s), etc. - * - * This function will not affect device wakeup latency, e.g., time - * elapsed from when a device driver enables a hardware device with - * clk_enable(), to when the device is ready for register access or - * other use. To control this device wakeup latency, use - * omap_pm_set_max_dev_wakeup_lat() - * - * Multiple calls to omap_pm_set_max_mpu_wakeup_lat() will replace the - * previous t value. To remove the latency target for the MPU, call - * with t = -1. - * - * XXX This constraint will be deprecated soon in favor of the more - * general omap_pm_set_max_dev_wakeup_lat() - * - * Returns -EINVAL for an invalid argument, -ERANGE if the constraint - * is not satisfiable, or 0 upon success. - */ -int omap_pm_set_max_mpu_wakeup_lat(struct device *dev, long t); - - -/** - * omap_pm_set_min_bus_tput - set minimum bus throughput needed by device - * @dev: struct device * requesting the constraint - * @tbus_id: interconnect to operate on (OCP_{INITIATOR,TARGET}_AGENT) - * @r: minimum throughput (in KiB/s) - * - * Request that the minimum data throughput on the OCP interconnect - * attached to device @dev interconnect agent @tbus_id be no less - * than @r KiB/s. - * - * It is expected that the OMAP PM or bus code will use this - * information to set the interconnect clock to run at the lowest - * possible speed that satisfies all current system users. The PM or - * bus code will adjust the estimate based on its model of the bus, so - * device driver authors should attempt to specify an accurate - * quantity for their device use case, and let the PM or bus code - * overestimate the numbers as necessary to handle request/response - * latency, other competing users on the system, etc. On OMAP2/3, if - * a driver requests a minimum L4 interconnect speed constraint, the - * code will also need to add an minimum L3 interconnect speed - * constraint, - * - * Multiple calls to omap_pm_set_min_bus_tput() will replace the - * previous rate value for this device. To remove the interconnect - * throughput restriction for this device, call with r = 0. - * - * Returns -EINVAL for an invalid argument, -ERANGE if the constraint - * is not satisfiable, or 0 upon success. - */ -int omap_pm_set_min_bus_tput(struct device *dev, u8 agent_id, unsigned long r); - - -/* - * CPUFreq-originated constraint - * - * In the future, this should be handled by custom OPP clocktype - * functions. - */ - - -/* - * Device context loss tracking - */ - -/** - * omap_pm_get_dev_context_loss_count - return count of times dev has lost ctx - * @dev: struct device * - * - * This function returns the number of times that the device @dev has - * lost its internal context. This generally occurs on a powerdomain - * transition to OFF. Drivers use this as an optimization to avoid restoring - * context if the device hasn't lost it. To use, drivers should initially - * call this in their context save functions and store the result. Early in - * the driver's context restore function, the driver should call this function - * again, and compare the result to the stored counter. If they differ, the - * driver must restore device context. If the number of context losses - * exceeds the maximum positive integer, the function will wrap to 0 and - * continue counting. Returns the number of context losses for this device, - * or negative value upon error. - */ -int omap_pm_get_dev_context_loss_count(struct device *dev); - -void omap_pm_enable_off_mode(void); -void omap_pm_disable_off_mode(void); - -#endif diff --git a/arch/arm/mach-omap2/pdata-quirks.c b/arch/arm/mach-omap2/pdata-quirks.c index 6459816c2879..7f02743edbe4 100644 --- a/arch/arm/mach-omap2/pdata-quirks.c +++ b/arch/arm/mach-omap2/pdata-quirks.c @@ -26,14 +26,12 @@ #include #include #include -#include #include #include "common.h" #include "common-board-devices.h" #include "control.h" #include "omap_device.h" -#include "omap-pm.h" #include "omap-secure.h" #include "soc.h" #include "hsmmc.h" @@ -514,18 +512,6 @@ void omap_auxdata_legacy_init(struct device *dev) dev->platform_data = &twl_gpio_auxdata; } -static struct ir_rx51_platform_data __maybe_unused rx51_ir_data = { - .set_max_mpu_wakeup_lat = omap_pm_set_max_mpu_wakeup_lat, -}; - -static struct platform_device __maybe_unused rx51_ir_device = { - .name = "ir_rx51", - .id = -1, - .dev = { - .platform_data = &rx51_ir_data, - }, -}; - #if IS_ENABLED(CONFIG_SND_OMAP_SOC_MCBSP) static struct omap_mcbsp_platform_data mcbsp_pdata; static void __init omap3_mcbsp_init(void) @@ -569,7 +555,6 @@ static struct of_dev_auxdata omap_auxdata_lookup[] = { "480c9000.smartreflex", &omap_sr_pdata[OMAP_SR_MPU]), OF_DEV_AUXDATA("ti,omap3-hsmmc", 0x4809c000, "4809c000.mmc", &mmc_pdata[0]), OF_DEV_AUXDATA("ti,omap3-hsmmc", 0x480b4000, "480b4000.mmc", &mmc_pdata[1]), - OF_DEV_AUXDATA("nokia,n900-ir", 0, "n900-ir", &rx51_ir_data), /* Only on am3517 */ OF_DEV_AUXDATA("ti,davinci_mdio", 0x5c030000, "davinci_mdio.0", NULL), OF_DEV_AUXDATA("ti,am3517-emac", 0x5c000000, "davinci_emac.0", diff --git a/arch/arm/mach-omap2/pm-debug.c b/arch/arm/mach-omap2/pm-debug.c index 5c46ea6756d7..acb698d5780f 100644 --- a/arch/arm/mach-omap2/pm-debug.c +++ b/arch/arm/mach-omap2/pm-debug.c @@ -31,7 +31,6 @@ #include "clock.h" #include "powerdomain.h" #include "clockdomain.h" -#include "omap-pm.h" #include "soc.h" #include "cm2xxx_3xxx.h" @@ -240,10 +239,6 @@ static int option_set(void *data, u64 val) *option = val; if (option == &enable_off_mode) { - if (val) - omap_pm_enable_off_mode(); - else - omap_pm_disable_off_mode(); if (cpu_is_omap34xx()) omap3_pm_off_mode_enable(val); } diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c index 6f68576e5695..b98c46d7f112 100644 --- a/arch/arm/mach-omap2/pm.c +++ b/arch/arm/mach-omap2/pm.c @@ -16,11 +16,11 @@ #include #include #include +#include #include #include -#include "omap-pm.h" #include "omap_device.h" #include "common.h" @@ -230,14 +230,6 @@ static void __init omap4_init_voltages(void) omap2_set_init_voltage("iva", "dpll_iva_m5x2_ck", "iva"); } -static int __init omap2_common_pm_init(void) -{ - omap_pm_if_init(); - - return 0; -} -omap_postcore_initcall(omap2_common_pm_init); - int __init omap2_common_pm_late_init(void) { /* Init the voltage layer */ diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c index 4fb4dc24e5e9..61dd72df119c 100644 --- a/arch/arm/mach-omap2/timer.c +++ b/arch/arm/mach-omap2/timer.c @@ -50,7 +50,6 @@ #include "omap_device.h" #include #include -#include "omap-pm.h" #include "soc.h" #include "common.h" -- cgit v1.2.3 From b456d4f592ba01a60c78539ca519893f86e4a600 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Mon, 16 Apr 2018 10:21:39 -0700 Subject: ARM: OMAP2+: Allow using ti-sysc for system timers If a system timer is configured with an interrconnect target module in the dts, the ti,hwmods and module fck are at the interconnect target level. Then there's a separate fck for the timer child device. If the child device has a separate functional clock, we need to configure it directly. For example, timer clk clkctrl clock bit 0 is the module clock for the interconnect target, and bit 24 being the functional clock for the timer IP. For system timers, we already mark them as disabled. Now must also mark the interconnect target module as disabled to prevent ti-sysc to manage it instead of the system timer. Cc: Keerthy Cc: Tero Kristo Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/timer.c | 67 +++++++++++++++++++++++++++++++++++---------- 1 file changed, 52 insertions(+), 15 deletions(-) (limited to 'arch/arm/mach-omap2') diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c index 61dd72df119c..5a70ab67af8e 100644 --- a/arch/arm/mach-omap2/timer.c +++ b/arch/arm/mach-omap2/timer.c @@ -167,6 +167,43 @@ static const struct of_device_id omap_timer_match[] __initconst = { { } }; +static int omap_timer_add_disabled_property(struct device_node *np) +{ + struct property *prop; + + prop = kzalloc(sizeof(*prop), GFP_KERNEL); + if (!prop) + return -ENOMEM; + + prop->name = "status"; + prop->value = "disabled"; + prop->length = strlen(prop->value); + + return of_add_property(np, prop); +} + +static int omap_timer_update_dt(struct device_node *np) +{ + int error = 0; + + if (!of_device_is_compatible(np, "ti,omap-counter32k")) { + error = omap_timer_add_disabled_property(np); + if (error) + return error; + } + + /* No parent interconnect target module configured? */ + if (of_get_property(np, "ti,hwmods", NULL)) + return error; + + /* Tag parent interconnect target module disabled */ + error = omap_timer_add_disabled_property(np->parent); + if (error) + return error; + + return 0; +} + /** * omap_get_timer_dt - get a timer using device-tree * @match - device-tree match structure for matching a device type @@ -182,6 +219,7 @@ static struct device_node * __init omap_get_timer_dt(const struct of_device_id * const char *property) { struct device_node *np; + int error; for_each_matching_node(np, match) { if (!of_device_is_available(np)) @@ -196,17 +234,9 @@ static struct device_node * __init omap_get_timer_dt(const struct of_device_id * of_get_property(np, "ti,timer-secure", NULL))) continue; - if (!of_device_is_compatible(np, "ti,omap-counter32k")) { - struct property *prop; + error = omap_timer_update_dt(np); + WARN(error, "%s: Could not update dt: %i\n", __func__, error); - prop = kzalloc(sizeof(*prop), GFP_KERNEL); - if (!prop) - return NULL; - prop->name = "status"; - prop->value = "disabled"; - prop->length = strlen(prop->value); - of_add_property(np, prop); - } return np; } @@ -265,8 +295,12 @@ static int __init omap_dm_timer_init_one(struct omap_dm_timer *timer, return -ENODEV; of_property_read_string_index(np, "ti,hwmods", 0, &oh_name); - if (!oh_name) - return -ENODEV; + if (!oh_name) { + of_property_read_string_index(np->parent, "ti,hwmods", 0, + &oh_name); + if (!oh_name) + return -ENODEV; + } timer->irq = irq_of_parse_and_map(np, 0); if (!timer->irq) @@ -418,9 +452,12 @@ static int __init __maybe_unused omap2_sync32k_clocksource_init(void) if (!np) return -ENODEV; - of_property_read_string_index(np, "ti,hwmods", 0, &oh_name); - if (!oh_name) - return -ENODEV; + of_property_read_string_index(np->parent, "ti,hwmods", 0, &oh_name); + if (!oh_name) { + of_property_read_string_index(np, "ti,hwmods", 0, &oh_name); + if (!oh_name) + return -ENODEV; + } /* * First check hwmod data is available for sync32k counter -- cgit v1.2.3 From 103fd8e7ac1f5f8e332970a95c79cd32c537798a Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Mon, 16 Apr 2018 10:21:15 -0700 Subject: ARM: OMAP2+: Use signed value for sysc register offsets We currently don't know if a revision register exists or not. Zero is often a valid offset for the revision register. As we are still checking device tree data against platform data, we will get bogus warnings with correct device tree data because of incomplete platform data. Let's fix the issue by using signed offsets and tag the revision registers that don't exist with -ENODEV, and init the missing ones with the correct revision register offset. Cc: Paul Walmsley Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/omap_hwmod.c | 21 +++++++++++---------- arch/arm/mach-omap2/omap_hwmod.h | 6 +++--- .../mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c | 1 + arch/arm/mach-omap2/omap_hwmod_3xxx_data.c | 4 ++++ arch/arm/mach-omap2/omap_hwmod_43xx_data.c | 1 + arch/arm/mach-omap2/omap_hwmod_44xx_data.c | 4 ++++ arch/arm/mach-omap2/omap_hwmod_54xx_data.c | 3 +++ arch/arm/mach-omap2/omap_hwmod_7xx_data.c | 6 ++++++ arch/arm/mach-omap2/omap_hwmod_81xx_data.c | 1 + 9 files changed, 34 insertions(+), 13 deletions(-) (limited to 'arch/arm/mach-omap2') diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index e7d23e200ecc..2ceffd85dd3d 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -481,7 +481,7 @@ static int _wait_softreset_complete(struct omap_hwmod *oh) sysc = oh->class->sysc; - if (sysc->sysc_flags & SYSS_HAS_RESET_STATUS) + if (sysc->sysc_flags & SYSS_HAS_RESET_STATUS && sysc->syss_offs > 0) omap_test_timeout((omap_hwmod_read(oh, sysc->syss_offs) & SYSS_RESETDONE_MASK), MAX_MODULE_SOFTRESET_WAIT, c); @@ -3171,19 +3171,19 @@ static int omap_hwmod_init_regbits(struct device *dev, */ int omap_hwmod_init_reg_offs(struct device *dev, const struct ti_sysc_module_data *data, - u32 *rev_offs, u32 *sysc_offs, u32 *syss_offs) + s32 *rev_offs, s32 *sysc_offs, s32 *syss_offs) { - *rev_offs = 0; + *rev_offs = -ENODEV; *sysc_offs = 0; *syss_offs = 0; - if (data->offsets[SYSC_REVISION] > 0) + if (data->offsets[SYSC_REVISION] >= 0) *rev_offs = data->offsets[SYSC_REVISION]; - if (data->offsets[SYSC_SYSCONFIG] > 0) + if (data->offsets[SYSC_SYSCONFIG] >= 0) *sysc_offs = data->offsets[SYSC_SYSCONFIG]; - if (data->offsets[SYSC_SYSSTATUS] > 0) + if (data->offsets[SYSC_SYSSTATUS] >= 0) *syss_offs = data->offsets[SYSC_SYSSTATUS]; return 0; @@ -3312,8 +3312,8 @@ static int omap_hwmod_check_module(struct device *dev, struct omap_hwmod *oh, const struct ti_sysc_module_data *data, struct sysc_regbits *sysc_fields, - u32 rev_offs, u32 sysc_offs, - u32 syss_offs, u32 sysc_flags, + s32 rev_offs, s32 sysc_offs, + s32 syss_offs, u32 sysc_flags, u32 idlemodes) { if (!oh->class->sysc) @@ -3365,7 +3365,7 @@ static int omap_hwmod_check_module(struct device *dev, int omap_hwmod_allocate_module(struct device *dev, struct omap_hwmod *oh, const struct ti_sysc_module_data *data, struct sysc_regbits *sysc_fields, - u32 rev_offs, u32 sysc_offs, u32 syss_offs, + s32 rev_offs, s32 sysc_offs, s32 syss_offs, u32 sysc_flags, u32 idlemodes) { struct omap_hwmod_class_sysconfig *sysc; @@ -3425,7 +3425,8 @@ int omap_hwmod_init_module(struct device *dev, { struct omap_hwmod *oh; struct sysc_regbits *sysc_fields; - u32 rev_offs, sysc_offs, syss_offs, sysc_flags, idlemodes; + s32 rev_offs, sysc_offs, syss_offs; + u32 sysc_flags, idlemodes; int error; if (!dev || !data) diff --git a/arch/arm/mach-omap2/omap_hwmod.h b/arch/arm/mach-omap2/omap_hwmod.h index c7122abbf977..b70cdc21f8a2 100644 --- a/arch/arm/mach-omap2/omap_hwmod.h +++ b/arch/arm/mach-omap2/omap_hwmod.h @@ -317,9 +317,9 @@ struct omap_hwmod_ocp_if { * then this field has to be populated with the correct offset structure. */ struct omap_hwmod_class_sysconfig { - u32 rev_offs; - u32 sysc_offs; - u32 syss_offs; + s32 rev_offs; + s32 sysc_offs; + s32 syss_offs; u16 sysc_flags; struct sysc_regbits *sysc_fields; u8 srst_udelay; diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c index 5efe91c6e95b..9ded7bf972e7 100644 --- a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c @@ -629,6 +629,7 @@ struct omap_hwmod am33xx_gpmc_hwmod = { /* 'i2c' class */ static struct omap_hwmod_class_sysconfig am33xx_i2c_sysc = { + .rev_offs = 0, .sysc_offs = 0x0010, .syss_offs = 0x0090, .sysc_flags = (SYSC_HAS_AUTOIDLE | SYSC_HAS_CLOCKACTIVITY | diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c index 23336b6c7125..d93f9ea4119e 100644 --- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c @@ -885,6 +885,7 @@ static struct omap_hwmod omap3xxx_dma_system_hwmod = { */ static struct omap_hwmod_class_sysconfig omap3xxx_mcbsp_sysc = { + .rev_offs = -ENODEV, .sysc_offs = 0x008c, .sysc_flags = (SYSC_HAS_CLOCKACTIVITY | SYSC_HAS_ENAWAKEUP | SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET), @@ -990,6 +991,7 @@ static struct omap_hwmod omap3xxx_mcbsp5_hwmod = { /* 'mcbsp sidetone' class */ static struct omap_hwmod_class_sysconfig omap3xxx_mcbsp_sidetone_sysc = { + .rev_offs = -ENODEV, .sysc_offs = 0x0010, .sysc_flags = SYSC_HAS_AUTOIDLE, .sysc_fields = &omap_hwmod_sysc_type1, @@ -1018,6 +1020,7 @@ static struct omap_hwmod omap3xxx_mcbsp3_sidetone_hwmod = { /* SR common */ static struct omap_hwmod_class_sysconfig omap34xx_sr_sysc = { + .rev_offs = -ENODEV, .sysc_offs = 0x24, .sysc_flags = (SYSC_HAS_CLOCKACTIVITY | SYSC_NO_CACHE), .sysc_fields = &omap34xx_sr_sysc_fields, @@ -1030,6 +1033,7 @@ static struct omap_hwmod_class omap34xx_smartreflex_hwmod_class = { }; static struct omap_hwmod_class_sysconfig omap36xx_sr_sysc = { + .rev_offs = -ENODEV, .sysc_offs = 0x38, .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART), .sysc_flags = (SYSC_HAS_SIDLEMODE | SYSC_HAS_ENAWAKEUP | diff --git a/arch/arm/mach-omap2/omap_hwmod_43xx_data.c b/arch/arm/mach-omap2/omap_hwmod_43xx_data.c index 5f73b730d4fc..aa271ac5ebac 100644 --- a/arch/arm/mach-omap2/omap_hwmod_43xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_43xx_data.c @@ -378,6 +378,7 @@ static struct omap_hwmod am43xx_usb_otg_ss1_hwmod = { }; static struct omap_hwmod_class_sysconfig am43xx_qspi_sysc = { + .rev_offs = 0, .sysc_offs = 0x0010, .sysc_flags = SYSC_HAS_SIDLEMODE, .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c index e4f8ae9cd637..234ee0eec815 100644 --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c @@ -1360,6 +1360,7 @@ static struct omap_hwmod omap44xx_hsi_hwmod = { */ static struct omap_hwmod_class_sysconfig omap44xx_i2c_sysc = { + .rev_offs = 0, .sysc_offs = 0x0010, .syss_offs = 0x0090, .sysc_flags = (SYSC_HAS_AUTOIDLE | SYSC_HAS_CLOCKACTIVITY | @@ -1634,6 +1635,7 @@ static struct omap_hwmod omap44xx_mailbox_hwmod = { /* The IP is not compliant to type1 / type2 scheme */ static struct omap_hwmod_class_sysconfig omap44xx_mcasp_sysc = { + .rev_offs = 0, .sysc_offs = 0x0004, .sysc_flags = SYSC_HAS_SIDLEMODE, .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | @@ -1667,6 +1669,7 @@ static struct omap_hwmod omap44xx_mcasp_hwmod = { */ static struct omap_hwmod_class_sysconfig omap44xx_mcbsp_sysc = { + .rev_offs = -ENODEV, .sysc_offs = 0x008c, .sysc_flags = (SYSC_HAS_CLOCKACTIVITY | SYSC_HAS_ENAWAKEUP | SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET), @@ -2353,6 +2356,7 @@ static struct omap_hwmod omap44xx_slimbus2_hwmod = { /* The IP is not compliant to type1 / type2 scheme */ static struct omap_hwmod_class_sysconfig omap44xx_smartreflex_sysc = { + .rev_offs = -ENODEV, .sysc_offs = 0x0038, .sysc_flags = (SYSC_HAS_ENAWAKEUP | SYSC_HAS_SIDLEMODE), .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | diff --git a/arch/arm/mach-omap2/omap_hwmod_54xx_data.c b/arch/arm/mach-omap2/omap_hwmod_54xx_data.c index c72cd84b07ec..887a30fa775b 100644 --- a/arch/arm/mach-omap2/omap_hwmod_54xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_54xx_data.c @@ -804,6 +804,7 @@ static struct omap_hwmod omap54xx_gpio8_hwmod = { */ static struct omap_hwmod_class_sysconfig omap54xx_i2c_sysc = { + .rev_offs = 0, .sysc_offs = 0x0010, .syss_offs = 0x0090, .sysc_flags = (SYSC_HAS_AUTOIDLE | SYSC_HAS_CLOCKACTIVITY | @@ -974,6 +975,7 @@ static struct omap_hwmod omap54xx_mailbox_hwmod = { */ static struct omap_hwmod_class_sysconfig omap54xx_mcbsp_sysc = { + .rev_offs = -ENODEV, .sysc_offs = 0x008c, .sysc_flags = (SYSC_HAS_CLOCKACTIVITY | SYSC_HAS_ENAWAKEUP | SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET), @@ -1997,6 +1999,7 @@ static struct omap_hwmod omap54xx_ocp2scp3_hwmod = { */ static struct omap_hwmod_class_sysconfig omap54xx_sata_sysc = { + .rev_offs = 0x00fc, .sysc_offs = 0x0000, .sysc_flags = (SYSC_HAS_MIDLEMODE | SYSC_HAS_SIDLEMODE), .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | diff --git a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c index 62352d1e6361..a27c2fed298c 100644 --- a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c @@ -1070,6 +1070,7 @@ static struct omap_hwmod dra7xx_hdq1w_hwmod = { */ static struct omap_hwmod_class_sysconfig dra7xx_i2c_sysc = { + .rev_offs = 0, .sysc_offs = 0x0010, .syss_offs = 0x0090, .sysc_flags = (SYSC_HAS_AUTOIDLE | SYSC_HAS_CLOCKACTIVITY | @@ -1440,6 +1441,7 @@ static struct omap_hwmod dra7xx_mcspi4_hwmod = { * */ static struct omap_hwmod_class_sysconfig dra7xx_mcasp_sysc = { + .rev_offs = 0, .sysc_offs = 0x0004, .sysc_flags = SYSC_HAS_SIDLEMODE, .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART), @@ -1898,6 +1900,7 @@ static struct omap_hwmod dra7xx_pciess2_hwmod = { */ static struct omap_hwmod_class_sysconfig dra7xx_qspi_sysc = { + .rev_offs = 0, .sysc_offs = 0x0010, .sysc_flags = SYSC_HAS_SIDLEMODE, .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | @@ -1930,6 +1933,7 @@ static struct omap_hwmod dra7xx_qspi_hwmod = { * */ static struct omap_hwmod_class_sysconfig dra7xx_rtcss_sysc = { + .rev_offs = 0x0074, .sysc_offs = 0x0078, .sysc_flags = SYSC_HAS_SIDLEMODE, .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | @@ -1965,6 +1969,7 @@ static struct omap_hwmod dra7xx_rtcss_hwmod = { */ static struct omap_hwmod_class_sysconfig dra7xx_sata_sysc = { + .rev_offs = 0x00fc, .sysc_offs = 0x0000, .sysc_flags = (SYSC_HAS_MIDLEMODE | SYSC_HAS_SIDLEMODE), .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | @@ -2003,6 +2008,7 @@ static struct omap_hwmod dra7xx_sata_hwmod = { /* The IP is not compliant to type1 / type2 scheme */ static struct omap_hwmod_class_sysconfig dra7xx_smartreflex_sysc = { + .rev_offs = -ENODEV, .sysc_offs = 0x0038, .sysc_flags = (SYSC_HAS_ENAWAKEUP | SYSC_HAS_SIDLEMODE), .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | diff --git a/arch/arm/mach-omap2/omap_hwmod_81xx_data.c b/arch/arm/mach-omap2/omap_hwmod_81xx_data.c index 686655f884c1..8e44e2728620 100644 --- a/arch/arm/mach-omap2/omap_hwmod_81xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_81xx_data.c @@ -954,6 +954,7 @@ static struct omap_hwmod_ocp_if dm816x_l4_hs__emac1 = { }; static struct omap_hwmod_class_sysconfig dm81xx_sata_sysc = { + .rev_offs = 0x00fc, .sysc_offs = 0x1100, .sysc_flags = SYSC_HAS_SIDLEMODE, .idlemodes = SIDLE_FORCE, -- cgit v1.2.3 From 71941002ad140cba0ee922a2bc9f5dcf9ac70b54 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Mon, 16 Apr 2018 10:24:14 -0700 Subject: ARM: OMAP2+: Only probe SDMA via ti-sysc if configured in dts We still have some SDMA probing using omap_device_build() for the arch/arm/plat-omap/dma.c part that the dmaengine driver then uses. So we still need to ensure that omap_device_build() works even if we probe and manage the dmaengine driver via ti-sysc. And we don't want to call dev_pm_domain_set() as otherwise we'd also have omap_device try to manage the hardware in addition to ti-sysc. Cc: Paul Walmsley Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/omap_device.c | 22 +++++++++++++++------- 1 file changed, 15 insertions(+), 7 deletions(-) (limited to 'arch/arm/mach-omap2') diff --git a/arch/arm/mach-omap2/omap_device.c b/arch/arm/mach-omap2/omap_device.c index 3b829a50d1db..ac219b9e6a4c 100644 --- a/arch/arm/mach-omap2/omap_device.c +++ b/arch/arm/mach-omap2/omap_device.c @@ -143,7 +143,7 @@ static int omap_device_build_from_dt(struct platform_device *pdev) struct resource res; const char *oh_name; int oh_cnt, i, ret = 0; - bool device_active = false; + bool device_active = false, skip_pm_domain = false; oh_cnt = of_property_count_strings(node, "ti,hwmods"); if (oh_cnt <= 0) { @@ -151,8 +151,15 @@ static int omap_device_build_from_dt(struct platform_device *pdev) return -ENODEV; } + /* SDMA still needs special handling for omap_device_build() */ + ret = of_property_read_string_index(node, "ti,hwmods", 0, &oh_name); + if (!ret && (!strncmp("dma_system", oh_name, 10) || + !strncmp("dma", oh_name, 3))) + skip_pm_domain = true; + /* Use ti-sysc driver instead of omap_device? */ - if (!omap_hwmod_parse_module_range(NULL, node, &res)) + if (!skip_pm_domain && + !omap_hwmod_parse_module_range(NULL, node, &res)) return -ENODEV; hwmods = kzalloc(sizeof(struct omap_hwmod *) * oh_cnt, GFP_KERNEL); @@ -191,11 +198,12 @@ static int omap_device_build_from_dt(struct platform_device *pdev) r->name = dev_name(&pdev->dev); } - dev_pm_domain_set(&pdev->dev, &omap_device_pm_domain); - - if (device_active) { - omap_device_enable(pdev); - pm_runtime_set_active(&pdev->dev); + if (!skip_pm_domain) { + dev_pm_domain_set(&pdev->dev, &omap_device_pm_domain); + if (device_active) { + omap_device_enable(pdev); + pm_runtime_set_active(&pdev->dev); + } } odbfd_exit1: -- cgit v1.2.3 From 02b83dcb3db7974cc25834b67ffac7eb90ce56ac Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Mon, 16 Apr 2018 10:23:46 -0700 Subject: ARM: OMAP2+: Initialize SoC PM later There's no need to probe devices until at module_init time and we currently have at least PM trying to use I2C for PMICs early on. As only a part of the SoC init_early is SoC specific, we only need to call the SoC specific PM init function. And we can modify omap2_common_pm_late_init() so it becomes a late_initcall(). Note that this changes am335x to call omap2_clk_enable_autoidle_all() that seems to be missing currently. Cc: Keerthy Cc: Tero Kristo Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/common.h | 16 ++++++---- arch/arm/mach-omap2/io.c | 67 ++++++--------------------------------- arch/arm/mach-omap2/pm.c | 19 +++++++++++ arch/arm/mach-omap2/pm33xx-core.c | 4 ++- 4 files changed, 40 insertions(+), 66 deletions(-) (limited to 'arch/arm/mach-omap2') diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h index fbe0b78bf489..75c1a89fab73 100644 --- a/arch/arm/mach-omap2/common.h +++ b/arch/arm/mach-omap2/common.h @@ -44,6 +44,9 @@ #define OMAP_INTC_START NR_IRQS +extern int (*omap_pm_soc_init)(void); +int omap_pm_nop_init(void); + #if defined(CONFIG_PM) && defined(CONFIG_ARCH_OMAP2) int omap2_pm_init(void); #else @@ -79,9 +82,12 @@ static inline int omap4_pm_init_early(void) #if defined(CONFIG_PM) && (defined(CONFIG_SOC_AM33XX) || \ defined(CONFIG_SOC_AM43XX)) -void amx3_common_pm_init(void); +int amx3_common_pm_init(void); #else -static inline void amx3_common_pm_init(void) { } +static inline int amx3_common_pm_init(void) +{ + return 0; +} #endif extern void omap2_init_common_infrastructure(void); @@ -122,14 +128,10 @@ void am43xx_init_early(void); void am43xx_init_late(void); void omap4430_init_early(void); void omap5_init_early(void); -void omap3_init_late(void); /* Do not use this one */ +void omap3_init_late(void); void omap4430_init_late(void); void omap2420_init_late(void); void omap2430_init_late(void); -void omap3430_init_late(void); -void omap35xx_init_late(void); -void omap3630_init_late(void); -void am35xx_init_late(void); void ti81xx_init_late(void); void am33xx_init_late(void); void omap5_init_late(void); diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c index 6ce60a478409..bb8e0bb7ef5d 100644 --- a/arch/arm/mach-omap2/io.c +++ b/arch/arm/mach-omap2/io.c @@ -422,11 +422,6 @@ static void __init __maybe_unused omap_hwmod_init_postsetup(void) omap_hwmod_for_each(_set_hwmod_postsetup_state, &postsetup_state); } -static void __init __maybe_unused omap_common_late_init(void) -{ - omap2_common_pm_late_init(); -} - #ifdef CONFIG_SOC_OMAP2420 void __init omap2420_init_early(void) { @@ -447,9 +442,7 @@ void __init omap2420_init_early(void) void __init omap2420_init_late(void) { - omap_common_late_init(); - omap2_pm_init(); - omap2_clk_enable_autoidle_all(); + omap_pm_soc_init = omap2_pm_init; } #endif @@ -473,9 +466,7 @@ void __init omap2430_init_early(void) void __init omap2430_init_late(void) { - omap_common_late_init(); - omap2_pm_init(); - omap2_clk_enable_autoidle_all(); + omap_pm_soc_init = omap2_pm_init; } #endif @@ -526,43 +517,12 @@ void __init am35xx_init_early(void) void __init omap3_init_late(void) { - omap_common_late_init(); - omap3_pm_init(); - omap2_clk_enable_autoidle_all(); -} - -void __init omap3430_init_late(void) -{ - omap_common_late_init(); - omap3_pm_init(); - omap2_clk_enable_autoidle_all(); -} - -void __init omap35xx_init_late(void) -{ - omap_common_late_init(); - omap3_pm_init(); - omap2_clk_enable_autoidle_all(); -} - -void __init omap3630_init_late(void) -{ - omap_common_late_init(); - omap3_pm_init(); - omap2_clk_enable_autoidle_all(); -} - -void __init am35xx_init_late(void) -{ - omap_common_late_init(); - omap3_pm_init(); - omap2_clk_enable_autoidle_all(); + omap_pm_soc_init = omap3_pm_init; } void __init ti81xx_init_late(void) { - omap_common_late_init(); - omap2_clk_enable_autoidle_all(); + omap_pm_soc_init = omap_pm_nop_init; } #endif @@ -618,8 +578,7 @@ void __init am33xx_init_early(void) void __init am33xx_init_late(void) { - omap_common_late_init(); - amx3_common_pm_init(); + omap_pm_soc_init = amx3_common_pm_init; } #endif @@ -642,9 +601,7 @@ void __init am43xx_init_early(void) void __init am43xx_init_late(void) { - omap_common_late_init(); - omap2_clk_enable_autoidle_all(); - amx3_common_pm_init(); + omap_pm_soc_init = amx3_common_pm_init; } #endif @@ -672,9 +629,7 @@ void __init omap4430_init_early(void) void __init omap4430_init_late(void) { - omap_common_late_init(); - omap4_pm_init(); - omap2_clk_enable_autoidle_all(); + omap_pm_soc_init = omap4_pm_init; } #endif @@ -700,9 +655,7 @@ void __init omap5_init_early(void) void __init omap5_init_late(void) { - omap_common_late_init(); - omap4_pm_init(); - omap2_clk_enable_autoidle_all(); + omap_pm_soc_init = omap4_pm_init; } #endif @@ -725,9 +678,7 @@ void __init dra7xx_init_early(void) void __init dra7xx_init_late(void) { - omap_common_late_init(); - omap4_pm_init(); - omap2_clk_enable_autoidle_all(); + omap_pm_soc_init = omap4_pm_init; } #endif diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c index b98c46d7f112..ca03af8fe43f 100644 --- a/arch/arm/mach-omap2/pm.c +++ b/arch/arm/mach-omap2/pm.c @@ -230,8 +230,20 @@ static void __init omap4_init_voltages(void) omap2_set_init_voltage("iva", "dpll_iva_m5x2_ck", "iva"); } +int __maybe_unused omap_pm_nop_init(void) +{ + return 0; +} + +int (*omap_pm_soc_init)(void); + int __init omap2_common_pm_late_init(void) { + int error; + + if (!omap_pm_soc_init) + return 0; + /* Init the voltage layer */ omap3_twl_init(); omap4_twl_init(); @@ -244,5 +256,12 @@ int __init omap2_common_pm_late_init(void) /* Smartreflex device init */ omap_devinit_smartreflex(); + error = omap_pm_soc_init(); + if (error) + pr_warn("%s: pm soc init failed: %i\n", __func__, error); + + omap2_clk_enable_autoidle_all(); + return 0; } +omap_late_initcall(omap2_common_pm_late_init); diff --git a/arch/arm/mach-omap2/pm33xx-core.c b/arch/arm/mach-omap2/pm33xx-core.c index 93c0b5ba9f09..9b3755a2e2ec 100644 --- a/arch/arm/mach-omap2/pm33xx-core.c +++ b/arch/arm/mach-omap2/pm33xx-core.c @@ -173,7 +173,7 @@ static struct am33xx_pm_platform_data *am33xx_pm_get_pdata(void) return NULL; } -void __init amx3_common_pm_init(void) +int __init amx3_common_pm_init(void) { struct am33xx_pm_platform_data *pdata; struct platform_device_info devinfo; @@ -186,4 +186,6 @@ void __init amx3_common_pm_init(void) devinfo.size_data = sizeof(*pdata); devinfo.id = -1; platform_device_register_full(&devinfo); + + return 0; } -- cgit v1.2.3 From 463ab4d58f972ba7fb782fbeebd84efc8ce8c091 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Mon, 16 Apr 2018 10:27:02 -0700 Subject: ARM: OMAP2+: Make display related init into device_initcall We can initialize almost everything at normal module_init time with ti-sysc except for clocks and timers. To prepare for that, let's make display init into device_initcall as otherwise we'll be calling of_platform_populate() before the parent has probed. Cc: Laurent Pinchart Cc: Tomi Valkeinen Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/board-generic.c | 2 -- arch/arm/mach-omap2/common.h | 2 -- arch/arm/mach-omap2/display.c | 3 ++- 3 files changed, 2 insertions(+), 5 deletions(-) (limited to 'arch/arm/mach-omap2') diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c index 6c61ecc62905..6b4f4975cf7a 100644 --- a/arch/arm/mach-omap2/board-generic.c +++ b/arch/arm/mach-omap2/board-generic.c @@ -31,8 +31,6 @@ static const struct of_device_id omap_dt_match_table[] __initconst = { static void __init __maybe_unused omap_generic_init(void) { pdata_quirks_init(omap_dt_match_table); - - omapdss_init_of(); omap_soc_device_init(); } diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h index 75c1a89fab73..dff3750e432f 100644 --- a/arch/arm/mach-omap2/common.h +++ b/arch/arm/mach-omap2/common.h @@ -352,7 +352,5 @@ extern int omap_dss_reset(struct omap_hwmod *); /* SoC specific clock initializer */ int omap_clk_init(void); -int __init omapdss_init_of(void); - #endif /* __ASSEMBLER__ */ #endif /* __ARCH_ARM_MACH_OMAP2PLUS_COMMON_H */ diff --git a/arch/arm/mach-omap2/display.c b/arch/arm/mach-omap2/display.c index 480a2b989908..9500b6e27380 100644 --- a/arch/arm/mach-omap2/display.c +++ b/arch/arm/mach-omap2/display.c @@ -385,7 +385,7 @@ static struct device_node * __init omapdss_find_dss_of_node(void) return NULL; } -int __init omapdss_init_of(void) +static int __init omapdss_init_of(void) { int r; struct device_node *node; @@ -415,3 +415,4 @@ int __init omapdss_init_of(void) return omapdss_init_fbdev(); } +omap_device_initcall(omapdss_init_of); -- cgit v1.2.3