From 908b75e850c4a6130b680ea7e59b00f80d4cd2d2 Mon Sep 17 00:00:00 2001 From: Tero Kristo Date: Tue, 25 Sep 2012 19:33:39 +0300 Subject: ARM: OMAP: add support for oscillator setup This contains startup and shutdown times for the oscillator. By default use ULONG_MAX. Oscillator setup is used for calculating and setting up latencies for sleep modes that disable oscillator. Based on a patch from Nishanth Menon . Signed-off-by: Tero Kristo Signed-off-by: Kevin Hilman --- arch/arm/mach-omap2/pm.h | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'arch/arm/mach-omap2/pm.h') diff --git a/arch/arm/mach-omap2/pm.h b/arch/arm/mach-omap2/pm.h index 67d66131cfa7..429028852103 100644 --- a/arch/arm/mach-omap2/pm.h +++ b/arch/arm/mach-omap2/pm.h @@ -129,4 +129,12 @@ static inline int omap4_twl_init(void) } #endif +#ifdef CONFIG_PM +extern void omap_pm_setup_oscillator(u32 tstart, u32 tshut); +extern void omap_pm_get_oscillator(u32 *tstart, u32 *tshut); +#else +static inline void omap_pm_setup_oscillator(u32 tstart, u32 tshut) { } +static inline void omap_pm_get_oscillator(u32 *tstart, u32 *tshut) { } +#endif + #endif -- cgit v1.2.3 From 00bd228ea9f7aad23f7933fa62a13d975d4b213a Mon Sep 17 00:00:00 2001 From: Tero Kristo Date: Tue, 25 Sep 2012 19:33:48 +0300 Subject: ARM: OMAP4: VC: setup I2C parameters based on board data VC code now provides a table of pre-calculated I2C setup parameters, which will be used based on the capacitance value calculated for the I2C trace on the PCB. A default trace length of 6.3cm is used unless board defines its own value during init. The parameters set will be the I2C internal pull setup and the I2C timing parameters for high speed use mode. Full speed mode is not supported as of now. Signed-off-by: Tero Kristo Signed-off-by: Kevin Hilman --- arch/arm/mach-omap2/omap_twl.c | 3 + arch/arm/mach-omap2/pm.h | 2 + arch/arm/mach-omap2/vc.c | 149 ++++++++++++++++++++++++++++++++++++++--- arch/arm/mach-omap2/voltage.h | 1 + 4 files changed, 147 insertions(+), 8 deletions(-) (limited to 'arch/arm/mach-omap2/pm.h') diff --git a/arch/arm/mach-omap2/omap_twl.c b/arch/arm/mach-omap2/omap_twl.c index ecae9890f0f2..611cb63d5ce6 100644 --- a/arch/arm/mach-omap2/omap_twl.c +++ b/arch/arm/mach-omap2/omap_twl.c @@ -183,6 +183,7 @@ static struct omap_voltdm_pmic omap4_mpu_pmic = { .volt_reg_addr = OMAP4_VDD_MPU_SR_VOLT_REG, .cmd_reg_addr = OMAP4_VDD_MPU_SR_CMD_REG, .i2c_high_speed = true, + .i2c_pad_load = 3, .vsel_to_uv = twl6030_vsel_to_uv, .uv_to_vsel = twl6030_uv_to_vsel, }; @@ -200,6 +201,7 @@ static struct omap_voltdm_pmic omap4_iva_pmic = { .volt_reg_addr = OMAP4_VDD_IVA_SR_VOLT_REG, .cmd_reg_addr = OMAP4_VDD_IVA_SR_CMD_REG, .i2c_high_speed = true, + .i2c_pad_load = 3, .vsel_to_uv = twl6030_vsel_to_uv, .uv_to_vsel = twl6030_uv_to_vsel, }; @@ -216,6 +218,7 @@ static struct omap_voltdm_pmic omap4_core_pmic = { .i2c_slave_addr = OMAP4_SRI2C_SLAVE_ADDR, .volt_reg_addr = OMAP4_VDD_CORE_SR_VOLT_REG, .cmd_reg_addr = OMAP4_VDD_CORE_SR_CMD_REG, + .i2c_pad_load = 3, .vsel_to_uv = twl6030_vsel_to_uv, .uv_to_vsel = twl6030_uv_to_vsel, }; diff --git a/arch/arm/mach-omap2/pm.h b/arch/arm/mach-omap2/pm.h index 429028852103..4db7b238a0d5 100644 --- a/arch/arm/mach-omap2/pm.h +++ b/arch/arm/mach-omap2/pm.h @@ -132,9 +132,11 @@ static inline int omap4_twl_init(void) #ifdef CONFIG_PM extern void omap_pm_setup_oscillator(u32 tstart, u32 tshut); extern void omap_pm_get_oscillator(u32 *tstart, u32 *tshut); +extern void omap_pm_setup_sr_i2c_pcb_length(u32 mm); #else static inline void omap_pm_setup_oscillator(u32 tstart, u32 tshut) { } static inline void omap_pm_get_oscillator(u32 *tstart, u32 *tshut) { } +static inline void omap_pm_setup_sr_i2c_pcb_length(u32 mm) { } #endif #endif diff --git a/arch/arm/mach-omap2/vc.c b/arch/arm/mach-omap2/vc.c index d72b787a0d83..687aa86c0d5e 100644 --- a/arch/arm/mach-omap2/vc.c +++ b/arch/arm/mach-omap2/vc.c @@ -24,6 +24,7 @@ #include "prm44xx.h" #include "pm.h" #include "scrm44xx.h" +#include "control.h" /** * struct omap_vc_channel_cfg - describe the cfg_channel bitfield @@ -69,6 +70,9 @@ static struct omap_vc_channel_cfg vc_mutant_channel_cfg = { }; static struct omap_vc_channel_cfg *vc_cfg_bits; + +/* Default I2C trace length on pcb, 6.3cm. Used for capacitance calculations. */ +static u32 sr_i2c_pcb_length = 63; #define CFG_CHANNEL_MASK 0x1f /** @@ -464,22 +468,135 @@ static void omap4_set_timings(struct voltagedomain *voltdm, bool off_mode) /* OMAP4 specific voltage init functions */ static void __init omap4_vc_init_channel(struct voltagedomain *voltdm) { - static bool is_initialized; - u32 vc_val; - omap4_set_timings(voltdm, true); omap4_set_timings(voltdm, false); +} + +struct i2c_init_data { + u8 loadbits; + u8 load; + u8 hsscll_38_4; + u8 hsscll_26; + u8 hsscll_19_2; + u8 hsscll_16_8; + u8 hsscll_12; +}; + +static const __initdata struct i2c_init_data omap4_i2c_timing_data[] = { + { + .load = 50, + .loadbits = 0x3, + .hsscll_38_4 = 13, + .hsscll_26 = 11, + .hsscll_19_2 = 9, + .hsscll_16_8 = 9, + .hsscll_12 = 8, + }, + { + .load = 25, + .loadbits = 0x2, + .hsscll_38_4 = 13, + .hsscll_26 = 11, + .hsscll_19_2 = 9, + .hsscll_16_8 = 9, + .hsscll_12 = 8, + }, + { + .load = 12, + .loadbits = 0x1, + .hsscll_38_4 = 11, + .hsscll_26 = 10, + .hsscll_19_2 = 9, + .hsscll_16_8 = 9, + .hsscll_12 = 8, + }, + { + .load = 0, + .loadbits = 0x0, + .hsscll_38_4 = 12, + .hsscll_26 = 10, + .hsscll_19_2 = 9, + .hsscll_16_8 = 8, + .hsscll_12 = 8, + }, +}; + +/** + * omap4_vc_i2c_timing_init - sets up board I2C timing parameters + * @voltdm: voltagedomain pointer to get data from + * + * Use PMIC + board supplied settings for calculating the total I2C + * channel capacitance and set the timing parameters based on this. + * Pre-calculated values are provided in data tables, as it is not + * too straightforward to calculate these runtime. + */ +static void __init omap4_vc_i2c_timing_init(struct voltagedomain *voltdm) +{ + u32 capacitance; + u32 val; + u16 hsscll; + const struct i2c_init_data *i2c_data; + + if (!voltdm->pmic->i2c_high_speed) { + pr_warn("%s: only high speed supported!\n", __func__); + return; + } - if (is_initialized) + /* PCB trace capacitance, 0.125pF / mm => mm / 8 */ + capacitance = DIV_ROUND_UP(sr_i2c_pcb_length, 8); + + /* OMAP pad capacitance */ + capacitance += 4; + + /* PMIC pad capacitance */ + capacitance += voltdm->pmic->i2c_pad_load; + + /* Search for capacitance match in the table */ + i2c_data = omap4_i2c_timing_data; + + while (i2c_data->load > capacitance) + i2c_data++; + + /* Select proper values based on sysclk frequency */ + switch (voltdm->sys_clk.rate) { + case 38400000: + hsscll = i2c_data->hsscll_38_4; + break; + case 26000000: + hsscll = i2c_data->hsscll_26; + break; + case 19200000: + hsscll = i2c_data->hsscll_19_2; + break; + case 16800000: + hsscll = i2c_data->hsscll_16_8; + break; + case 12000000: + hsscll = i2c_data->hsscll_12; + break; + default: + pr_warn("%s: unsupported sysclk rate: %d!\n", __func__, + voltdm->sys_clk.rate); return; + } + + /* Loadbits define pull setup for the I2C channels */ + val = i2c_data->loadbits << 25 | i2c_data->loadbits << 29; - /* XXX These are magic numbers and do not belong! */ - vc_val = (0x60 << OMAP4430_SCLL_SHIFT | 0x26 << OMAP4430_SCLH_SHIFT); - voltdm->write(vc_val, OMAP4_PRM_VC_CFG_I2C_CLK_OFFSET); + /* Write to SYSCTRL_PADCONF_WKUP_CTRL_I2C_2 to setup I2C pull */ + __raw_writel(val, OMAP2_L4_IO_ADDRESS(OMAP4_CTRL_MODULE_PAD_WKUP + + OMAP4_CTRL_MODULE_PAD_WKUP_CONTROL_I2C_2)); - is_initialized = true; + /* HSSCLH can always be zero */ + val = hsscll << OMAP4430_HSSCLL_SHIFT; + val |= (0x28 << OMAP4430_SCLL_SHIFT | 0x2c << OMAP4430_SCLH_SHIFT); + + /* Write setup times to I2C config register */ + voltdm->write(val, OMAP4_PRM_VC_CFG_I2C_CLK_OFFSET); } + + /** * omap_vc_i2c_init - initialize I2C interface to PMIC * @voltdm: voltage domain containing VC data @@ -519,6 +636,9 @@ static void __init omap_vc_i2c_init(struct voltagedomain *voltdm) mcode << __ffs(vc->common->i2c_mcode_mask), vc->common->i2c_cfg_reg); + if (cpu_is_omap44xx()) + omap4_vc_i2c_timing_init(voltdm); + initialized = true; } @@ -546,6 +666,19 @@ static u8 omap_vc_calc_vsel(struct voltagedomain *voltdm, u32 uvolt) return voltdm->pmic->uv_to_vsel(uvolt); } +/** + * omap_pm_setup_sr_i2c_pcb_length - set length of SR I2C traces on PCB + * @mm: length of the PCB trace in millimetres + * + * Sets the PCB trace length for the I2C channel. By default uses 63mm. + * This is needed for properly calculating the capacitance value for + * the PCB trace, and for setting the SR I2C channel timing parameters. + */ +void __init omap_pm_setup_sr_i2c_pcb_length(u32 mm) +{ + sr_i2c_pcb_length = mm; +} + void __init omap_vc_init_channel(struct voltagedomain *voltdm) { struct omap_vc_channel *vc = voltdm->vc; diff --git a/arch/arm/mach-omap2/voltage.h b/arch/arm/mach-omap2/voltage.h index 78923f93efde..a0ce4f10ff13 100644 --- a/arch/arm/mach-omap2/voltage.h +++ b/arch/arm/mach-omap2/voltage.h @@ -139,6 +139,7 @@ struct omap_voltdm_pmic { u32 vddmax; u8 vp_timeout_us; bool i2c_high_speed; + u32 i2c_pad_load; u8 i2c_mcode; unsigned long (*vsel_to_uv) (const u8 vsel); u8 (*uv_to_vsel) (unsigned long uV); -- cgit v1.2.3