From 734f69a773d8ff65111562116c18c987049ddac4 Mon Sep 17 00:00:00 2001 From: Paul Walmsley Date: Tue, 26 Jan 2010 20:13:06 -0700 Subject: OMAP2xxx clock: move the DVFS virtual clock code into mach-omap2/clkt2xxx_virt_prcm_set.c Move the DVFS virtual clock functions from clock2xxx.c to mach-omap2/clkt2xxx_virt_prcm_set.c. This is intended to make the clock code easier to understand, since all of the functions needed to manage the virt_prcm_set clock are now located in their own file, rather than being mixed with other, unrelated functions. Clock debugging is also now more finely-grained, since the DEBUG macro can now be defined for the virt_prcm_set clock alone. This should reduce unnecessary console noise when debugging. Also, if at some future point the mach-omap2/ directory is split into OMAP2/3/4 variants, this clkt file can be placed in the mach-omap2xxx/ directory, rather than shared with other chip types that don't use this clock type. Thanks to Alexander Shishkin for his comments. Thanks also to Kevin Hilman for finding and fixing a bug with the CONFIG_CPU_FREQ portion of this patch. Signed-off-by: Paul Walmsley Cc: Richard Woodruff Cc: Alexander Shishkin Cc: Kevin Hilman --- arch/arm/mach-omap2/clock2xxx.c | 211 ---------------------------------------- 1 file changed, 211 deletions(-) (limited to 'arch/arm/mach-omap2/clock2xxx.c') diff --git a/arch/arm/mach-omap2/clock2xxx.c b/arch/arm/mach-omap2/clock2xxx.c index 419ae80fa1d4..11d6edb0b32f 100644 --- a/arch/arm/mach-omap2/clock2xxx.c +++ b/arch/arm/mach-omap2/clock2xxx.c @@ -54,9 +54,6 @@ #define APLLS_CLKIN_13MHZ 2 #define APLLS_CLKIN_12MHZ 3 -const struct prcm_config *curr_prcm_set; -const struct prcm_config *rate_table; - struct clk *vclk, *sclk, *dclk; void __iomem *prcm_clksrc_ctrl; @@ -185,214 +182,6 @@ const struct clkops clkops_apll54 = { .disable = omap2_clk_apll_disable, }; -/** - * omap2_table_mpu_recalc - just return the MPU speed - * @clk: virt_prcm_set struct clk - * - * Set virt_prcm_set's rate to the mpu_speed field of the current PRCM set. - */ -unsigned long omap2_table_mpu_recalc(struct clk *clk) -{ - return curr_prcm_set->mpu_speed; -} - -/* - * Look for a rate equal or less than the target rate given a configuration set. - * - * What's not entirely clear is "which" field represents the key field. - * Some might argue L3-DDR, others ARM, others IVA. This code is simple and - * just uses the ARM rates. - */ -long omap2_round_to_table_rate(struct clk *clk, unsigned long rate) -{ - const struct prcm_config *ptr; - long highest_rate; - long sys_ck_rate; - - sys_ck_rate = clk_get_rate(sclk); - - highest_rate = -EINVAL; - - for (ptr = rate_table; ptr->mpu_speed; ptr++) { - if (!(ptr->flags & cpu_mask)) - continue; - if (ptr->xtal_speed != sys_ck_rate) - continue; - - highest_rate = ptr->mpu_speed; - - /* Can check only after xtal frequency check */ - if (ptr->mpu_speed <= rate) - break; - } - return highest_rate; -} - -/* Sets basic clocks based on the specified rate */ -int omap2_select_table_rate(struct clk *clk, unsigned long rate) -{ - u32 cur_rate, done_rate, bypass = 0, tmp; - const struct prcm_config *prcm; - unsigned long found_speed = 0; - unsigned long flags; - long sys_ck_rate; - - sys_ck_rate = clk_get_rate(sclk); - - for (prcm = rate_table; prcm->mpu_speed; prcm++) { - if (!(prcm->flags & cpu_mask)) - continue; - - if (prcm->xtal_speed != sys_ck_rate) - continue; - - if (prcm->mpu_speed <= rate) { - found_speed = prcm->mpu_speed; - break; - } - } - - if (!found_speed) { - printk(KERN_INFO "Could not set MPU rate to %luMHz\n", - rate / 1000000); - return -EINVAL; - } - - curr_prcm_set = prcm; - cur_rate = omap2xxx_clk_get_core_rate(dclk); - - if (prcm->dpll_speed == cur_rate / 2) { - omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL, 1); - } else if (prcm->dpll_speed == cur_rate * 2) { - omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL_X2, 1); - } else if (prcm->dpll_speed != cur_rate) { - local_irq_save(flags); - - if (prcm->dpll_speed == prcm->xtal_speed) - bypass = 1; - - if ((prcm->cm_clksel2_pll & OMAP24XX_CORE_CLK_SRC_MASK) == - CORE_CLK_SRC_DPLL_X2) - done_rate = CORE_CLK_SRC_DPLL_X2; - else - done_rate = CORE_CLK_SRC_DPLL; - - /* MPU divider */ - cm_write_mod_reg(prcm->cm_clksel_mpu, MPU_MOD, CM_CLKSEL); - - /* dsp + iva1 div(2420), iva2.1(2430) */ - cm_write_mod_reg(prcm->cm_clksel_dsp, - OMAP24XX_DSP_MOD, CM_CLKSEL); - - cm_write_mod_reg(prcm->cm_clksel_gfx, GFX_MOD, CM_CLKSEL); - - /* Major subsystem dividers */ - tmp = cm_read_mod_reg(CORE_MOD, CM_CLKSEL1) & OMAP24XX_CLKSEL_DSS2_MASK; - cm_write_mod_reg(prcm->cm_clksel1_core | tmp, CORE_MOD, - CM_CLKSEL1); - - if (cpu_is_omap2430()) - cm_write_mod_reg(prcm->cm_clksel_mdm, - OMAP2430_MDM_MOD, CM_CLKSEL); - - /* x2 to enter omap2xxx_sdrc_init_params() */ - omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL_X2, 1); - - omap2_set_prcm(prcm->cm_clksel1_pll, prcm->base_sdrc_rfr, - bypass); - - omap2xxx_sdrc_init_params(omap2xxx_sdrc_dll_is_unlocked()); - omap2xxx_sdrc_reprogram(done_rate, 0); - - local_irq_restore(flags); - } - - return 0; -} - -#ifdef CONFIG_CPU_FREQ -/* - * Walk PRCM rate table and fillout cpufreq freq_table - * XXX This should be replaced by an OPP layer in the near future - */ -static struct cpufreq_frequency_table *freq_table; - -void omap2xxx_clk_init_cpufreq_table(struct cpufreq_frequency_table **table) -{ - const struct prcm_config *prcm; - long sys_ck_rate; - int i = 0; - int tbl_sz = 0; - - if (!cpu_is_omap2xxx()) - return; - - sys_ck_rate = clk_get_rate(sclk); - - for (prcm = rate_table; prcm->mpu_speed; prcm++) { - if (!(prcm->flags & cpu_mask)) - continue; - if (prcm->xtal_speed != sys_ck_rate) - continue; - - /* don't put bypass rates in table */ - if (prcm->dpll_speed == prcm->xtal_speed) - continue; - - tbl_sz++; - } - - /* - * XXX Ensure that we're doing what CPUFreq expects for this error - * case and the following one - */ - if (tbl_sz == 0) { - pr_warning("%s: no matching entries in rate_table\n", - __func__); - return; - } - - /* Include the CPUFREQ_TABLE_END terminator entry */ - tbl_sz++; - - freq_table = kzalloc(sizeof(struct cpufreq_frequency_table) * tbl_sz, - GFP_ATOMIC); - if (!freq_table) { - pr_err("%s: could not kzalloc frequency table\n", __func__); - return; - } - - for (prcm = rate_table; prcm->mpu_speed; prcm++) { - if (!(prcm->flags & cpu_mask)) - continue; - if (prcm->xtal_speed != sys_ck_rate) - continue; - - /* don't put bypass rates in table */ - if (prcm->dpll_speed == prcm->xtal_speed) - continue; - - freq_table[i].index = i; - freq_table[i].frequency = prcm->mpu_speed / 1000; - i++; - } - - freq_table[i].index = i; - freq_table[i].frequency = CPUFREQ_TABLE_END; - - *table = &freq_table[0]; -} - -void omap2xxx_clk_exit_cpufreq_table(struct cpufreq_frequency_table **table) -{ - if (!cpu_is_omap2xxx()) - return; - - kfree(freq_table); -} - -#endif - static u32 omap2_get_apll_clkin(void) { u32 aplls, srate = 0; -- cgit v1.2.3