From 1f6e46bf6e4d6284605f48d5116068b5e72b4bb2 Mon Sep 17 00:00:00 2001 From: Andrew Lunn Date: Sat, 17 Nov 2012 17:00:46 +0100 Subject: ARM: Kirkwood: Convert TS219 to pinctrl. Make use of the pinctrl driver for configuring all the pins, instead of using the Orion mpp code. Signed-off-by: Andrew Lunn Signed-off-by: Jason Cooper --- arch/arm/mach-kirkwood/board-ts219.c | 25 ------------------------- 1 file changed, 25 deletions(-) (limited to 'arch/arm/mach-kirkwood/board-ts219.c') diff --git a/arch/arm/mach-kirkwood/board-ts219.c b/arch/arm/mach-kirkwood/board-ts219.c index 5a031b931370..329ff682e4e6 100644 --- a/arch/arm/mach-kirkwood/board-ts219.c +++ b/arch/arm/mach-kirkwood/board-ts219.c @@ -26,41 +26,16 @@ #include #include #include "common.h" -#include "mpp.h" #include "tsx1x-common.h" static struct mv643xx_eth_platform_data qnap_ts219_ge00_data = { .phy_addr = MV643XX_ETH_PHY_ADDR(8), }; -static unsigned int qnap_ts219_mpp_config[] __initdata = { - MPP0_SPI_SCn, - MPP1_SPI_MOSI, - MPP2_SPI_SCK, - MPP3_SPI_MISO, - MPP4_SATA1_ACTn, - MPP5_SATA0_ACTn, - MPP8_TW0_SDA, - MPP9_TW0_SCK, - MPP10_UART0_TXD, - MPP11_UART0_RXD, - MPP13_UART1_TXD, /* PIC controller */ - MPP14_UART1_RXD, /* PIC controller */ - MPP15_GPIO, /* USB Copy button (on devices with 88F6281) */ - MPP16_GPIO, /* Reset button (on devices with 88F6281) */ - MPP36_GPIO, /* RAM: 0: 256 MB, 1: 512 MB */ - MPP37_GPIO, /* Reset button (on devices with 88F6282) */ - MPP43_GPIO, /* USB Copy button (on devices with 88F6282) */ - MPP44_GPIO, /* Board ID: 0: TS-11x, 1: TS-21x */ - 0 -}; - void __init qnap_dt_ts219_init(void) { u32 dev, rev; - kirkwood_mpp_conf(qnap_ts219_mpp_config); - kirkwood_pcie_id(&dev, &rev); if (dev == MV88F6282_DEV_ID) qnap_ts219_ge00_data.phy_addr = MV643XX_ETH_PHY_ADDR(0); -- cgit v1.2.3