From e98d72d98a25890308941080d3a17b4c77e3f460 Mon Sep 17 00:00:00 2001 From: Jorik Jonker Date: Sat, 29 Sep 2018 15:18:30 +0200 Subject: ARM: dts: sun8i-h3: add sy8106a to orange pi plus The Orange Pi Plus board lacks voltage scaling capabilities in its current form. This results in random freezes during boot when cpufreq is enabled, probably due to wrong voltages. This patch (more or less copy/paste from 06139c) does the following things on this board: - enable r_i2c - add sy8106a to the r_i2c bus - have the sy8106a regulate VDD of cpu Since the Orange Pi Plus has the same PMU setup as the Orange Pi PC, I simply took min/max/fixed/ramp from the latter DTS. In that file the origin of the values are described by the following comment: "The datasheet uses 1.1V as the minimum value of VDD-CPUX, however both the Armbian DVFS table and the official one have operating points with voltage under 1.1V, and both DVFS table are known to work properly at the lowest operating point. Use 1.0V as the minimum voltage instead." I have tested this on patch two Orange Pi Plus boards, by running a kernel with this patch and do intermettent runs of cpuburn while monitoring voltage, frequency and temperature. The board runs stable across its operatiing points while showing a reasonable (< 40C) temperature. My Orange Pi PC, when put to the same test, yields similar stable results. Signed-off-by: Jorik Jonker Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts index b403e5d787cb..ac8438c2cff1 100644 --- a/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts +++ b/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts @@ -74,6 +74,10 @@ }; }; +&cpu0 { + cpu-supply = <®_vdd_cpux>; +}; + &ehci3 { status = "okay"; }; @@ -119,6 +123,22 @@ }; }; +&r_i2c { + status = "okay"; + + reg_vdd_cpux: regulator@65 { + compatible = "silergy,sy8106a"; + reg = <0x65>; + regulator-name = "vdd-cpux"; + silergy,fixed-microvolt = <1200000>; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; + regulator-ramp-delay = <200>; + regulator-boot-on; + regulator-always-on; + }; +}; + &usbphy { usb3_vbus-supply = <®_usb3_vbus>; }; -- cgit v1.2.3