From b803211825d897b8345ccc5de38a69dd3386594a Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Wed, 5 Sep 2018 19:40:24 +0200 Subject: ARM: dts: exynos: Remove double SD card detect pin inversion The SDHCI standard, MMC host controller bindings and MMC core defines card detect pin as active low. Therefore there is no point to invert it twice. Signed-off-by: Krzysztof Kozlowski Tested-by: Marek Szyprowski --- arch/arm/boot/dts/exynos4210-universal_c210.dts | 3 +-- arch/arm/boot/dts/exynos4412-midas.dtsi | 3 +-- arch/arm/boot/dts/exynos4412-odroid-common.dtsi | 3 +-- 3 files changed, 3 insertions(+), 6 deletions(-) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/exynos4210-universal_c210.dts b/arch/arm/boot/dts/exynos4210-universal_c210.dts index 40e65a28a8ca..5c3d98654f13 100644 --- a/arch/arm/boot/dts/exynos4210-universal_c210.dts +++ b/arch/arm/boot/dts/exynos4210-universal_c210.dts @@ -545,8 +545,7 @@ pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4>; pinctrl-names = "default"; vmmc-supply = <&ldo5_reg>; - cd-gpios = <&gpx3 4 GPIO_ACTIVE_HIGH>; - cd-inverted; + cd-gpios = <&gpx3 4 GPIO_ACTIVE_LOW>; status = "okay"; }; diff --git a/arch/arm/boot/dts/exynos4412-midas.dtsi b/arch/arm/boot/dts/exynos4412-midas.dtsi index c0476c290977..aed2f2e2b0d1 100644 --- a/arch/arm/boot/dts/exynos4412-midas.dtsi +++ b/arch/arm/boot/dts/exynos4412-midas.dtsi @@ -1269,8 +1269,7 @@ &sdhci_2 { bus-width = <4>; - cd-gpios = <&gpx3 4 GPIO_ACTIVE_HIGH>; - cd-inverted; + cd-gpios = <&gpx3 4 GPIO_ACTIVE_LOW>; pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4 &sdhci2_cd>; pinctrl-names = "default"; vmmc-supply = <&ldo21_reg>; diff --git a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi index a09e46c9dbc0..2caa3132f34e 100644 --- a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi +++ b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi @@ -539,8 +539,7 @@ pinctrl-names = "default"; vmmc-supply = <&ldo21_reg>; vqmmc-supply = <&ldo4_reg>; - cd-gpios = <&gpk2 2 GPIO_ACTIVE_HIGH>; - cd-inverted; + cd-gpios = <&gpk2 2 GPIO_ACTIVE_LOW>; status = "okay"; }; -- cgit v1.2.3