From 95b840afe420bb4152fde11473e7ce370b058c1b Mon Sep 17 00:00:00 2001 From: Sjoerd Simons Date: Wed, 5 Apr 2017 16:06:11 +0200 Subject: ARM: dts: rockchip: Setup usb vbus-supply on rk3288-rock2 Now that the rockchip usb phy has a vbus-supply property use that to control the vbus regulator on rock2. Signed-off-by: Sjoerd Simons Signed-off-by: Heiko Stuebner --- arch/arm/boot/dts/rk3288-rock2-square.dts | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/rk3288-rock2-square.dts b/arch/arm/boot/dts/rk3288-rock2-square.dts index a23a94811be8..8ed25e9f60bc 100644 --- a/arch/arm/boot/dts/rk3288-rock2-square.dts +++ b/arch/arm/boot/dts/rk3288-rock2-square.dts @@ -125,10 +125,6 @@ gpio = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&host_vbus_drv>; - /* Always on as the rockchip usb phy doesn't have a vbus-supply - * property - */ - regulator-always-on; regulator-name = "vcc_host"; }; @@ -279,6 +275,10 @@ status = "okay"; }; +&usbphy1 { + vbus-supply = <&vcc_usb_host>; +}; + &usb_host0_ehci { status = "okay"; }; -- cgit v1.2.3 From 802139d00970f32396ea4e25ab7a371967691da8 Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Tue, 18 Apr 2017 12:22:03 +0800 Subject: ARM: sun8i: a83t: Drop skeleton.dtsi skeleton.dtsi is deprecated. Remove it from sun8i-a83t.dtsi and add the needed device nodes directly. Also drop an extra, non-style-conforming line in the copyright license header. Signed-off-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun8i-a83t.dtsi | 16 +++++++++++++--- 1 file changed, 13 insertions(+), 3 deletions(-) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/sun8i-a83t.dtsi b/arch/arm/boot/dts/sun8i-a83t.dtsi index 0ec143773ee9..913aacafe8d5 100644 --- a/arch/arm/boot/dts/sun8i-a83t.dtsi +++ b/arch/arm/boot/dts/sun8i-a83t.dtsi @@ -40,15 +40,20 @@ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. - */ -#include "skeleton.dtsi" - #include / { interrupt-parent = <&gic>; + #address-cells = <1>; + #size-cells = <1>; + + aliases { + }; + + chosen { + }; cpus { #address-cells = <1>; @@ -146,6 +151,11 @@ }; }; + memory { + reg = <0x40000000 0x80000000>; + device_type = "memory"; + }; + soc { compatible = "simple-bus"; #address-cells = <1>; -- cgit v1.2.3 From e53bfb022fd21637270c43e83a853b823fc6b1d1 Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Tue, 18 Apr 2017 12:22:05 +0800 Subject: ARM: sun8i: a83t: Rename pinmux setting names The pinmux setting nodes all have an address element in their node names, however the pinctrl node does not have #address-cells. Rename the existing pinmux setting nodes and labels in sun8i-a83t.dtsi, dropping identifiers for functions that only have one possible setting, and using the pingroup name if the function is identically available on different pingroups. Signed-off-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun8i-a83t-allwinner-h8homlet-v2.dts | 2 +- arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts | 2 +- arch/arm/boot/dts/sun8i-a83t.dtsi | 10 +++++----- 3 files changed, 7 insertions(+), 7 deletions(-) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/sun8i-a83t-allwinner-h8homlet-v2.dts b/arch/arm/boot/dts/sun8i-a83t-allwinner-h8homlet-v2.dts index 342e1d33fa1c..aecdeeb368ed 100644 --- a/arch/arm/boot/dts/sun8i-a83t-allwinner-h8homlet-v2.dts +++ b/arch/arm/boot/dts/sun8i-a83t-allwinner-h8homlet-v2.dts @@ -59,6 +59,6 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_b>; + pinctrl-0 = <&uart0_pb_pins>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts b/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts index 88b1e0970b8d..d2614f101ecc 100644 --- a/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts +++ b/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts @@ -60,6 +60,6 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_b>; + pinctrl-0 = <&uart0_pb_pins>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun8i-a83t.dtsi b/arch/arm/boot/dts/sun8i-a83t.dtsi index 913aacafe8d5..5f5c10c04dd3 100644 --- a/arch/arm/boot/dts/sun8i-a83t.dtsi +++ b/arch/arm/boot/dts/sun8i-a83t.dtsi @@ -174,7 +174,7 @@ #interrupt-cells = <3>; #gpio-cells = <3>; - mmc0_pins_a: mmc0@0 { + mmc0_pins: mmc0_pins { pins = "PF0", "PF1", "PF2", "PF3", "PF4", "PF5"; function = "mmc0"; @@ -182,13 +182,13 @@ bias-pull-up; }; - uart0_pins_a: uart0@0 { - pins = "PF2", "PF4"; + uart0_pb_pins: uart0_pb_pins { + pins = "PB9", "PB10"; function = "uart0"; }; - uart0_pins_b: uart0@1 { - pins = "PB9", "PB10"; + uart0_pf_pins: uart0_pf_pins { + pins = "PF2", "PF4"; function = "uart0"; }; }; -- cgit v1.2.3 From 8a92770b648121570eafc7fdec5bb50b8e4a7347 Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Wed, 19 Apr 2017 13:09:16 +0800 Subject: ARM: sunxi: common-regulators: Drop pinmux settings for GPIO pins As part of our effort to move pinctrl/GPIO interlocking into the driver where it belongs, this patch drops the definition and usage of the pinmux settings for the common regulators defined in sunxi-common-regulators.dtsi. Signed-off-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun4i-a10-hyundai-a7hd.dts | 4 --- arch/arm/boot/dts/sun5i-a10s-auxtek-t003.dts | 8 ------ arch/arm/boot/dts/sun5i-a10s-auxtek-t004.dts | 4 --- arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts | 4 --- arch/arm/boot/dts/sun5i-a10s-wobo-i5.dts | 4 --- .../boot/dts/sun5i-a13-empire-electronix-d709.dts | 4 --- arch/arm/boot/dts/sun5i-a13-hsg-h702.dts | 5 ---- arch/arm/boot/dts/sun5i-a13-olinuxino.dts | 4 --- arch/arm/boot/dts/sun6i-a31-hummingbird.dts | 5 ---- arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts | 8 ------ arch/arm/boot/dts/sun7i-a20-pcduino3.dts | 4 --- arch/arm/boot/dts/sun8i-h3-orangepi-2.dts | 4 --- arch/arm/boot/dts/sunxi-common-regulators.dtsi | 30 ---------------------- 13 files changed, 88 deletions(-) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/sun4i-a10-hyundai-a7hd.dts b/arch/arm/boot/dts/sun4i-a10-hyundai-a7hd.dts index 85dcf81ab64e..bc4351bb851f 100644 --- a/arch/arm/boot/dts/sun4i-a10-hyundai-a7hd.dts +++ b/arch/arm/boot/dts/sun4i-a10-hyundai-a7hd.dts @@ -120,10 +120,6 @@ status = "okay"; }; -&usb2_vbus_pin_a { - pins = "PH6"; -}; - &usb_otg { dr_mode = "otg"; status = "okay"; diff --git a/arch/arm/boot/dts/sun5i-a10s-auxtek-t003.dts b/arch/arm/boot/dts/sun5i-a10s-auxtek-t003.dts index c6f742a7e69f..d2dee8d434bf 100644 --- a/arch/arm/boot/dts/sun5i-a10s-auxtek-t003.dts +++ b/arch/arm/boot/dts/sun5i-a10s-auxtek-t003.dts @@ -136,14 +136,6 @@ status = "okay"; }; -&usb0_vbus_pin_a { - pins = "PG13"; -}; - -&usb1_vbus_pin_a { - pins = "PB10"; -}; - &usb_otg { dr_mode = "host"; status = "okay"; diff --git a/arch/arm/boot/dts/sun5i-a10s-auxtek-t004.dts b/arch/arm/boot/dts/sun5i-a10s-auxtek-t004.dts index a27c3fa58736..16f839df4227 100644 --- a/arch/arm/boot/dts/sun5i-a10s-auxtek-t004.dts +++ b/arch/arm/boot/dts/sun5i-a10s-auxtek-t004.dts @@ -168,10 +168,6 @@ status = "okay"; }; -&usb1_vbus_pin_a { - pins = "PG13"; -}; - &usbphy { pinctrl-names = "default"; pinctrl-0 = <&usb0_id_detect_pin>; diff --git a/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts b/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts index 894f874a5beb..eff36fe1aaa3 100644 --- a/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts +++ b/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts @@ -271,10 +271,6 @@ status = "okay"; }; -&usb0_vbus_pin_a { - pins = "PG11"; -}; - &usbphy { pinctrl-names = "default"; pinctrl-0 = <&usb0_id_detect_pin>; diff --git a/arch/arm/boot/dts/sun5i-a10s-wobo-i5.dts b/arch/arm/boot/dts/sun5i-a10s-wobo-i5.dts index ea3e5655a61b..5482be174e12 100644 --- a/arch/arm/boot/dts/sun5i-a10s-wobo-i5.dts +++ b/arch/arm/boot/dts/sun5i-a10s-wobo-i5.dts @@ -216,10 +216,6 @@ status = "okay"; }; -&usb1_vbus_pin_a { - pins = "PG12"; -}; - &usbphy { usb1_vbus-supply = <®_usb1_vbus>; status = "okay"; diff --git a/arch/arm/boot/dts/sun5i-a13-empire-electronix-d709.dts b/arch/arm/boot/dts/sun5i-a13-empire-electronix-d709.dts index 34411d27aadf..3dbb0d7c2f8c 100644 --- a/arch/arm/boot/dts/sun5i-a13-empire-electronix-d709.dts +++ b/arch/arm/boot/dts/sun5i-a13-empire-electronix-d709.dts @@ -207,10 +207,6 @@ status = "okay"; }; -&usb0_vbus_pin_a { - pins = "PG12"; -}; - &usbphy { pinctrl-names = "default"; pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>; diff --git a/arch/arm/boot/dts/sun5i-a13-hsg-h702.dts b/arch/arm/boot/dts/sun5i-a13-hsg-h702.dts index 2489c16f7efa..584fa579ded2 100644 --- a/arch/arm/boot/dts/sun5i-a13-hsg-h702.dts +++ b/arch/arm/boot/dts/sun5i-a13-hsg-h702.dts @@ -186,7 +186,6 @@ }; ®_usb0_vbus { - pinctrl-0 = <&usb0_vbus_pin_a>; gpio = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */ status = "okay"; }; @@ -202,10 +201,6 @@ status = "okay"; }; -&usb0_vbus_pin_a { - pins = "PG12"; -}; - &usbphy { pinctrl-names = "default"; pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>; diff --git a/arch/arm/boot/dts/sun5i-a13-olinuxino.dts b/arch/arm/boot/dts/sun5i-a13-olinuxino.dts index 95f591bb8ced..38072c7e10e2 100644 --- a/arch/arm/boot/dts/sun5i-a13-olinuxino.dts +++ b/arch/arm/boot/dts/sun5i-a13-olinuxino.dts @@ -269,10 +269,6 @@ status = "okay"; }; -&usb0_vbus_pin_a { - pins = "PG12"; -}; - &usbphy { pinctrl-names = "default"; pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>; diff --git a/arch/arm/boot/dts/sun6i-a31-hummingbird.dts b/arch/arm/boot/dts/sun6i-a31-hummingbird.dts index d4f74f476f25..b4c87a23e3f8 100644 --- a/arch/arm/boot/dts/sun6i-a31-hummingbird.dts +++ b/arch/arm/boot/dts/sun6i-a31-hummingbird.dts @@ -344,11 +344,6 @@ status = "okay"; }; -&usb1_vbus_pin_a { - /* different pin from sunxi-common-regulators */ - pins = "PH24"; -}; - &usbphy { usb0_id_det-gpio = <&pio 0 15 GPIO_ACTIVE_HIGH>; /* PA15 */ usb0_vbus_det-gpio = <&pio 0 16 GPIO_ACTIVE_HIGH>; /* PA16 */ diff --git a/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts b/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts index 96bb0bc198ba..004b6ddac813 100644 --- a/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts +++ b/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts @@ -85,10 +85,6 @@ }; }; -&ahci_pwr_pin_a { - pins = "PB3"; -}; - &ahci { target-supply = <®_ahci_5v>; status = "okay"; @@ -319,10 +315,6 @@ status = "okay"; }; -&usb2_vbus_pin_a { - pins = "PH12"; -}; - &usbphy { pinctrl-names = "default"; pinctrl-0 = <&usb0_id_detect_pin>; diff --git a/arch/arm/boot/dts/sun7i-a20-pcduino3.dts b/arch/arm/boot/dts/sun7i-a20-pcduino3.dts index 7c96b53b76bf..98177b5891cb 100644 --- a/arch/arm/boot/dts/sun7i-a20-pcduino3.dts +++ b/arch/arm/boot/dts/sun7i-a20-pcduino3.dts @@ -106,10 +106,6 @@ status = "okay"; }; -&ahci_pwr_pin_a { - pins = "PH2"; -}; - &codec { status = "okay"; }; diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-2.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-2.dts index 5b6d14555b7c..d7d5330c566f 100644 --- a/arch/arm/boot/dts/sun8i-h3-orangepi-2.dts +++ b/arch/arm/boot/dts/sun8i-h3-orangepi-2.dts @@ -195,10 +195,6 @@ status = "disabled"; }; -&usb1_vbus_pin_a { - pins = "PG13"; -}; - &usbphy { usb1_vbus-supply = <®_usb1_vbus>; status = "okay"; diff --git a/arch/arm/boot/dts/sunxi-common-regulators.dtsi b/arch/arm/boot/dts/sunxi-common-regulators.dtsi index ce5c53e4452f..d8e5826fb3de 100644 --- a/arch/arm/boot/dts/sunxi-common-regulators.dtsi +++ b/arch/arm/boot/dts/sunxi-common-regulators.dtsi @@ -44,33 +44,9 @@ #include -&pio { - ahci_pwr_pin_a: ahci_pwr_pin@0 { - pins = "PB8"; - function = "gpio_out"; - }; - - usb0_vbus_pin_a: usb0_vbus_pin@0 { - pins = "PB9"; - function = "gpio_out"; - }; - - usb1_vbus_pin_a: usb1_vbus_pin@0 { - pins = "PH6"; - function = "gpio_out"; - }; - - usb2_vbus_pin_a: usb2_vbus_pin@0 { - pins = "PH3"; - function = "gpio_out"; - }; -}; - / { reg_ahci_5v: ahci-5v { compatible = "regulator-fixed"; - pinctrl-names = "default"; - pinctrl-0 = <&ahci_pwr_pin_a>; regulator-name = "ahci-5v"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; @@ -82,8 +58,6 @@ reg_usb0_vbus: usb0-vbus { compatible = "regulator-fixed"; - pinctrl-names = "default"; - pinctrl-0 = <&usb0_vbus_pin_a>; regulator-name = "usb0-vbus"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; @@ -94,8 +68,6 @@ reg_usb1_vbus: usb1-vbus { compatible = "regulator-fixed"; - pinctrl-names = "default"; - pinctrl-0 = <&usb1_vbus_pin_a>; regulator-name = "usb1-vbus"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; @@ -107,8 +79,6 @@ reg_usb2_vbus: usb2-vbus { compatible = "regulator-fixed"; - pinctrl-names = "default"; - pinctrl-0 = <&usb2_vbus_pin_a>; regulator-name = "usb2-vbus"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; -- cgit v1.2.3 From cf439662affda9475d4b71b910aad856fc3966d3 Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Wed, 19 Apr 2017 13:09:17 +0800 Subject: ARM: sunxi: Drop mmc0_cd_pin_reference_design pinmux setting As part of our effort to move pinctrl/GPIO interlocking into the driver where it belongs, this patch drops the definition and usage of the mmc0_cd_pin_reference_design pinmux setting for the default mmc0 card detect GPIO pin. Signed-off-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun4i-a10-a1000.dts | 2 +- arch/arm/boot/dts/sun4i-a10-ba10-tvbox.dts | 2 +- arch/arm/boot/dts/sun4i-a10-chuwi-v7-cw0825.dts | 2 +- arch/arm/boot/dts/sun4i-a10-cubieboard.dts | 2 +- arch/arm/boot/dts/sun4i-a10-dserve-dsrv9703c.dts | 2 +- arch/arm/boot/dts/sun4i-a10-gemei-g9.dts | 2 +- arch/arm/boot/dts/sun4i-a10-hackberry.dts | 2 +- arch/arm/boot/dts/sun4i-a10-hyundai-a7hd.dts | 2 +- arch/arm/boot/dts/sun4i-a10-inet1.dts | 2 +- arch/arm/boot/dts/sun4i-a10-inet97fv2.dts | 2 +- arch/arm/boot/dts/sun4i-a10-inet9f-rev03.dts | 2 +- arch/arm/boot/dts/sun4i-a10-itead-iteaduino-plus.dts | 2 +- arch/arm/boot/dts/sun4i-a10-jesurun-q5.dts | 2 +- arch/arm/boot/dts/sun4i-a10-marsboard.dts | 2 +- arch/arm/boot/dts/sun4i-a10-mini-xplus.dts | 2 +- arch/arm/boot/dts/sun4i-a10-mk802.dts | 2 +- arch/arm/boot/dts/sun4i-a10-mk802ii.dts | 2 +- arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts | 2 +- arch/arm/boot/dts/sun4i-a10-pcduino.dts | 2 +- arch/arm/boot/dts/sun4i-a10-pov-protab2-ips9.dts | 2 +- arch/arm/boot/dts/sun4i-a10.dtsi | 6 ------ arch/arm/boot/dts/sun7i-a20-cubieboard2.dts | 2 +- arch/arm/boot/dts/sun7i-a20-cubietruck.dts | 2 +- arch/arm/boot/dts/sun7i-a20-hummingbird.dts | 2 +- arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts | 2 +- arch/arm/boot/dts/sun7i-a20-icnova-swac.dts | 2 +- arch/arm/boot/dts/sun7i-a20-itead-ibox.dts | 2 +- arch/arm/boot/dts/sun7i-a20-m3.dts | 2 +- arch/arm/boot/dts/sun7i-a20-mk808c.dts | 2 +- arch/arm/boot/dts/sun7i-a20-olimex-som-evb.dts | 2 +- arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts | 2 +- arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts | 2 +- arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts | 2 +- arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts | 2 +- arch/arm/boot/dts/sun7i-a20-pcduino3.dts | 2 +- arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts | 2 +- arch/arm/boot/dts/sun7i-a20-wits-pro-a20-dkt.dts | 2 +- arch/arm/boot/dts/sun7i-a20.dtsi | 6 ------ 38 files changed, 36 insertions(+), 48 deletions(-) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/sun4i-a10-a1000.dts b/arch/arm/boot/dts/sun4i-a10-a1000.dts index f2a01fe2bebc..f80d37ddc4c6 100644 --- a/arch/arm/boot/dts/sun4i-a10-a1000.dts +++ b/arch/arm/boot/dts/sun4i-a10-a1000.dts @@ -171,7 +171,7 @@ &mmc0 { pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ diff --git a/arch/arm/boot/dts/sun4i-a10-ba10-tvbox.dts b/arch/arm/boot/dts/sun4i-a10-ba10-tvbox.dts index 942d739a4384..6b02de592a02 100644 --- a/arch/arm/boot/dts/sun4i-a10-ba10-tvbox.dts +++ b/arch/arm/boot/dts/sun4i-a10-ba10-tvbox.dts @@ -109,7 +109,7 @@ &mmc0 { pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ diff --git a/arch/arm/boot/dts/sun4i-a10-chuwi-v7-cw0825.dts b/arch/arm/boot/dts/sun4i-a10-chuwi-v7-cw0825.dts index 17f8c5ec011c..a7d61994b8fd 100644 --- a/arch/arm/boot/dts/sun4i-a10-chuwi-v7-cw0825.dts +++ b/arch/arm/boot/dts/sun4i-a10-chuwi-v7-cw0825.dts @@ -128,7 +128,7 @@ &mmc0 { pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ diff --git a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts index d844938e2aa7..a698a994e5ff 100644 --- a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts +++ b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts @@ -142,7 +142,7 @@ &mmc0 { pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ diff --git a/arch/arm/boot/dts/sun4i-a10-dserve-dsrv9703c.dts b/arch/arm/boot/dts/sun4i-a10-dserve-dsrv9703c.dts index aad3bec1cb39..e0777ae808c7 100644 --- a/arch/arm/boot/dts/sun4i-a10-dserve-dsrv9703c.dts +++ b/arch/arm/boot/dts/sun4i-a10-dserve-dsrv9703c.dts @@ -163,7 +163,7 @@ &mmc0 { pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ diff --git a/arch/arm/boot/dts/sun4i-a10-gemei-g9.dts b/arch/arm/boot/dts/sun4i-a10-gemei-g9.dts index 9616cdecce93..d8bfd7b74916 100644 --- a/arch/arm/boot/dts/sun4i-a10-gemei-g9.dts +++ b/arch/arm/boot/dts/sun4i-a10-gemei-g9.dts @@ -146,7 +146,7 @@ &mmc0 { pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH01 */ diff --git a/arch/arm/boot/dts/sun4i-a10-hackberry.dts b/arch/arm/boot/dts/sun4i-a10-hackberry.dts index a1a7282199d5..856cfc9128e6 100644 --- a/arch/arm/boot/dts/sun4i-a10-hackberry.dts +++ b/arch/arm/boot/dts/sun4i-a10-hackberry.dts @@ -107,7 +107,7 @@ &mmc0 { pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ diff --git a/arch/arm/boot/dts/sun4i-a10-hyundai-a7hd.dts b/arch/arm/boot/dts/sun4i-a10-hyundai-a7hd.dts index bc4351bb851f..6506595268b2 100644 --- a/arch/arm/boot/dts/sun4i-a10-hyundai-a7hd.dts +++ b/arch/arm/boot/dts/sun4i-a10-hyundai-a7hd.dts @@ -79,7 +79,7 @@ &mmc0 { pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ diff --git a/arch/arm/boot/dts/sun4i-a10-inet1.dts b/arch/arm/boot/dts/sun4i-a10-inet1.dts index b8923b92cb36..d51d8c302daf 100644 --- a/arch/arm/boot/dts/sun4i-a10-inet1.dts +++ b/arch/arm/boot/dts/sun4i-a10-inet1.dts @@ -161,7 +161,7 @@ &mmc0 { pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ diff --git a/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts b/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts index a1a2bbb3f9d3..a8e479fe43ca 100644 --- a/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts +++ b/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts @@ -147,7 +147,7 @@ &mmc0 { pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ diff --git a/arch/arm/boot/dts/sun4i-a10-inet9f-rev03.dts b/arch/arm/boot/dts/sun4i-a10-inet9f-rev03.dts index 4a27eb9102cd..2acb89a87d41 100644 --- a/arch/arm/boot/dts/sun4i-a10-inet9f-rev03.dts +++ b/arch/arm/boot/dts/sun4i-a10-inet9f-rev03.dts @@ -305,7 +305,7 @@ &mmc0 { pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ diff --git a/arch/arm/boot/dts/sun4i-a10-itead-iteaduino-plus.dts b/arch/arm/boot/dts/sun4i-a10-itead-iteaduino-plus.dts index 4e798f014c99..92e3e030ced3 100644 --- a/arch/arm/boot/dts/sun4i-a10-itead-iteaduino-plus.dts +++ b/arch/arm/boot/dts/sun4i-a10-itead-iteaduino-plus.dts @@ -100,7 +100,7 @@ &mmc0 { pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ diff --git a/arch/arm/boot/dts/sun4i-a10-jesurun-q5.dts b/arch/arm/boot/dts/sun4i-a10-jesurun-q5.dts index 308dc1513041..92b2d4af3d21 100644 --- a/arch/arm/boot/dts/sun4i-a10-jesurun-q5.dts +++ b/arch/arm/boot/dts/sun4i-a10-jesurun-q5.dts @@ -140,7 +140,7 @@ &mmc0 { pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ diff --git a/arch/arm/boot/dts/sun4i-a10-marsboard.dts b/arch/arm/boot/dts/sun4i-a10-marsboard.dts index 98a5f7258dca..0f927da28ee1 100644 --- a/arch/arm/boot/dts/sun4i-a10-marsboard.dts +++ b/arch/arm/boot/dts/sun4i-a10-marsboard.dts @@ -141,7 +141,7 @@ &mmc0 { pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ diff --git a/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts b/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts index 484c57493bd2..a5ed9e4e22c6 100644 --- a/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts +++ b/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts @@ -97,7 +97,7 @@ &mmc0 { pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ diff --git a/arch/arm/boot/dts/sun4i-a10-mk802.dts b/arch/arm/boot/dts/sun4i-a10-mk802.dts index 2b75745cd246..81db6824a2c7 100644 --- a/arch/arm/boot/dts/sun4i-a10-mk802.dts +++ b/arch/arm/boot/dts/sun4i-a10-mk802.dts @@ -72,7 +72,7 @@ &mmc0 { pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ diff --git a/arch/arm/boot/dts/sun4i-a10-mk802ii.dts b/arch/arm/boot/dts/sun4i-a10-mk802ii.dts index c861fa7e356c..e74a881fd9a7 100644 --- a/arch/arm/boot/dts/sun4i-a10-mk802ii.dts +++ b/arch/arm/boot/dts/sun4i-a10-mk802ii.dts @@ -83,7 +83,7 @@ &mmc0 { pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ diff --git a/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts b/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts index 3a2522a9419d..462412ee903c 100644 --- a/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts +++ b/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts @@ -145,7 +145,7 @@ &mmc0 { pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ diff --git a/arch/arm/boot/dts/sun4i-a10-pcduino.dts b/arch/arm/boot/dts/sun4i-a10-pcduino.dts index 83596fd2ccfc..84f55e76df0c 100644 --- a/arch/arm/boot/dts/sun4i-a10-pcduino.dts +++ b/arch/arm/boot/dts/sun4i-a10-pcduino.dts @@ -147,7 +147,7 @@ &mmc0 { pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ diff --git a/arch/arm/boot/dts/sun4i-a10-pov-protab2-ips9.dts b/arch/arm/boot/dts/sun4i-a10-pov-protab2-ips9.dts index a68c7cc53b94..c0f8c88b5a7d 100644 --- a/arch/arm/boot/dts/sun4i-a10-pov-protab2-ips9.dts +++ b/arch/arm/boot/dts/sun4i-a10-pov-protab2-ips9.dts @@ -149,7 +149,7 @@ &mmc0 { pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi index b63668ece151..41c2579143fd 100644 --- a/arch/arm/boot/dts/sun4i-a10.dtsi +++ b/arch/arm/boot/dts/sun4i-a10.dtsi @@ -1030,12 +1030,6 @@ bias-pull-up; }; - mmc0_cd_pin_reference_design: mmc0_cd_pin@0 { - pins = "PH1"; - function = "gpio_in"; - bias-pull-up; - }; - ps20_pins_a: ps20@0 { pins = "PI20", "PI21"; function = "ps2"; diff --git a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts index a2eab7aa80e0..7ac5bcc9f972 100644 --- a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts +++ b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts @@ -137,7 +137,7 @@ &mmc0 { pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ diff --git a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts index 102903e83bd2..4ebeecf9c3d7 100644 --- a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts +++ b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts @@ -178,7 +178,7 @@ &mmc0 { pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ diff --git a/arch/arm/boot/dts/sun7i-a20-hummingbird.dts b/arch/arm/boot/dts/sun7i-a20-hummingbird.dts index 99c00b9a1546..6e6264cd69f8 100644 --- a/arch/arm/boot/dts/sun7i-a20-hummingbird.dts +++ b/arch/arm/boot/dts/sun7i-a20-hummingbird.dts @@ -160,7 +160,7 @@ &mmc0 { pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v0>; bus-width = <4>; cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ diff --git a/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts b/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts index 4da49717da21..e5cbcad3a556 100644 --- a/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts +++ b/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts @@ -157,7 +157,7 @@ &mmc0 { pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ diff --git a/arch/arm/boot/dts/sun7i-a20-icnova-swac.dts b/arch/arm/boot/dts/sun7i-a20-icnova-swac.dts index 28d3abbdc2d4..794e7617f545 100644 --- a/arch/arm/boot/dts/sun7i-a20-icnova-swac.dts +++ b/arch/arm/boot/dts/sun7i-a20-icnova-swac.dts @@ -104,7 +104,7 @@ &mmc0 { pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 8 5 GPIO_ACTIVE_HIGH>; /* PI5 */ diff --git a/arch/arm/boot/dts/sun7i-a20-itead-ibox.dts b/arch/arm/boot/dts/sun7i-a20-itead-ibox.dts index d52222c82cb8..8a8a6dbcd414 100644 --- a/arch/arm/boot/dts/sun7i-a20-itead-ibox.dts +++ b/arch/arm/boot/dts/sun7i-a20-itead-ibox.dts @@ -121,7 +121,7 @@ &mmc0 { pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ diff --git a/arch/arm/boot/dts/sun7i-a20-m3.dts b/arch/arm/boot/dts/sun7i-a20-m3.dts index 86f69813683e..43c94787ef07 100644 --- a/arch/arm/boot/dts/sun7i-a20-m3.dts +++ b/arch/arm/boot/dts/sun7i-a20-m3.dts @@ -117,7 +117,7 @@ &mmc0 { pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ diff --git a/arch/arm/boot/dts/sun7i-a20-mk808c.dts b/arch/arm/boot/dts/sun7i-a20-mk808c.dts index c4ee30709f3a..f7413094183c 100644 --- a/arch/arm/boot/dts/sun7i-a20-mk808c.dts +++ b/arch/arm/boot/dts/sun7i-a20-mk808c.dts @@ -109,7 +109,7 @@ &mmc0 { pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v0>; bus-width = <4>; cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ diff --git a/arch/arm/boot/dts/sun7i-a20-olimex-som-evb.dts b/arch/arm/boot/dts/sun7i-a20-olimex-som-evb.dts index 1af5b46862cb..64c8ef9a2756 100644 --- a/arch/arm/boot/dts/sun7i-a20-olimex-som-evb.dts +++ b/arch/arm/boot/dts/sun7i-a20-olimex-som-evb.dts @@ -187,7 +187,7 @@ &mmc0 { pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts index dcd0f7a0dffa..2ce1a9f13a17 100644 --- a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts +++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts @@ -130,7 +130,7 @@ &mmc0 { pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts index e7d45425758c..097bd755764c 100644 --- a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts +++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts @@ -131,7 +131,7 @@ &mmc0 { pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts index def0ad8395bb..0b7403e4d687 100644 --- a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts +++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts @@ -198,7 +198,7 @@ &mmc0 { pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ diff --git a/arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts b/arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts index f47a5c46bc20..39bc73db72e5 100644 --- a/arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts +++ b/arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts @@ -130,7 +130,7 @@ &mmc0 { pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ diff --git a/arch/arm/boot/dts/sun7i-a20-pcduino3.dts b/arch/arm/boot/dts/sun7i-a20-pcduino3.dts index 98177b5891cb..777152a3df0f 100644 --- a/arch/arm/boot/dts/sun7i-a20-pcduino3.dts +++ b/arch/arm/boot/dts/sun7i-a20-pcduino3.dts @@ -156,7 +156,7 @@ &mmc0 { pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ diff --git a/arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts b/arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts index e19f17177755..f8d0aafb9f88 100644 --- a/arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts +++ b/arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts @@ -151,7 +151,7 @@ &mmc0 { pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ diff --git a/arch/arm/boot/dts/sun7i-a20-wits-pro-a20-dkt.dts b/arch/arm/boot/dts/sun7i-a20-wits-pro-a20-dkt.dts index c3078d4f1093..84462d7961f5 100644 --- a/arch/arm/boot/dts/sun7i-a20-wits-pro-a20-dkt.dts +++ b/arch/arm/boot/dts/sun7i-a20-wits-pro-a20-dkt.dts @@ -120,7 +120,7 @@ &mmc0 { pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi index 93aa55970bd7..c03b59aaec82 100644 --- a/arch/arm/boot/dts/sun7i-a20.dtsi +++ b/arch/arm/boot/dts/sun7i-a20.dtsi @@ -1190,12 +1190,6 @@ bias-pull-up; }; - mmc0_cd_pin_reference_design: mmc0_cd_pin@0 { - pins = "PH1"; - function = "gpio_in"; - bias-pull-up; - }; - mmc2_pins_a: mmc2@0 { pins = "PC6", "PC7", "PC8", "PC9", "PC10", "PC11"; -- cgit v1.2.3 From 52826587a44f55e958e89c6f21bfdaadf0273ac8 Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Wed, 19 Apr 2017 13:09:18 +0800 Subject: ARM: sun8i: h3: orangepi-pc: Enable USB OTG The Orange Pi PC, PC Plus, and Plus 2E all have a USB OTG port that can be used in both powered host mode and peripheral mode. When in peripheral mode, the port does not power the board. There is no VBUS sensing on the port. All three boards have all related pins routed the same way. The device tree file for the Orange Pi Plus 2E is based on the Orange Pi PC Plus, which itself is based on the Orange Pi PC. Changes to the base Orange Pi PC device tree file affects all 3 boards. This patch adds the regulator controlling VBUS on the OTG port, the GPIO for the ID detect pin, and enables the USB OTG and host controllers. Signed-off-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts | 22 +++++++++++++++++++++- 1 file changed, 21 insertions(+), 1 deletion(-) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts index f148111c326d..1a044b17d6c6 100644 --- a/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts +++ b/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts @@ -97,6 +97,10 @@ status = "okay"; }; +&ehci0 { + status = "okay"; +}; + &ehci1 { status = "okay"; }; @@ -125,6 +129,10 @@ status = "okay"; }; +&ohci0 { + status = "okay"; +}; + &ohci1 { status = "okay"; }; @@ -156,6 +164,11 @@ }; }; +®_usb0_vbus { + gpio = <&r_pio 0 2 GPIO_ACTIVE_HIGH>; /* PL2 */ + status = "okay"; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pins_a>; @@ -180,7 +193,14 @@ status = "disabled"; }; +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + &usbphy { - /* USB VBUS is always on */ + usb0_id_det-gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */ + usb0_vbus-supply = <®_usb0_vbus>; + /* VBUS on USB host ports are always on */ status = "okay"; }; -- cgit v1.2.3 From ef00b70d386499aa110a03fa283e35f5839f13fa Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Wed, 19 Apr 2017 13:09:19 +0800 Subject: ARM: sun8i: h3: bananapi-m2-plus: Enable USB OTG The Bananapi M2 Plus has a USB OTG port that can be used in both powered host mode and peripheral mode. When in peripheral mode, the port does not power the board. There is no VBUS sensing on the port. This patch adds the regulator controlling VBUS on the OTG port, the GPIO for the ID detect pin, and enables the USB OTG and host controllers. Signed-off-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts | 22 +++++++++++++++++++++- 1 file changed, 21 insertions(+), 1 deletion(-) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts b/arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts index 52acbe111cad..17c7c088cdea 100644 --- a/arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts +++ b/arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts @@ -92,6 +92,10 @@ }; }; +&ehci0 { + status = "okay"; +}; + &ehci1 { status = "okay"; }; @@ -145,6 +149,10 @@ status = "okay"; }; +&ohci0 { + status = "okay"; +}; + &ohci1 { status = "okay"; }; @@ -170,6 +178,11 @@ }; }; +®_usb0_vbus { + gpio = <&pio 3 11 GPIO_ACTIVE_HIGH>; /* PD11 */ + status = "okay"; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pins_a>; @@ -182,7 +195,14 @@ status = "okay"; }; +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + &usbphy { - /* USB VBUS is on as long as VCC-IO is on */ + usb0_id_det-gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */ + usb0_vbus-supply = <®_usb0_vbus>; + /* USB host VBUS is on as long as VCC-IO is on */ status = "okay"; }; -- cgit v1.2.3 From 84f1738a9c6b9171e226e5324863e3257b89a503 Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Thu, 20 Apr 2017 16:25:09 +0530 Subject: ARM: sun8i: Use - instead of @ for DT OPP entries Compiling the DT file with W=1, DTC warns like follows: Warning (unit_address_vs_reg): Node /opp_table0/opp@1000000000 has a unit name, but no reg property Fix this by replacing '@' with '-' as the OPP nodes will never have a "reg" property. Reported-by: Krzysztof Kozlowski Reported-by: Masahiro Yamada Suggested-by: Mark Rutland Signed-off-by: Viresh Kumar Acked-by: Maxime Ripard Acked-by: Rob Herring Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun8i-a33-sinlinx-sina33.dts | 4 ++-- arch/arm/boot/dts/sun8i-a33.dtsi | 30 +++++++++++++------------- 2 files changed, 17 insertions(+), 17 deletions(-) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/sun8i-a33-sinlinx-sina33.dts b/arch/arm/boot/dts/sun8i-a33-sinlinx-sina33.dts index 9b620cc1d5f1..8a0b42a2c2da 100644 --- a/arch/arm/boot/dts/sun8i-a33-sinlinx-sina33.dts +++ b/arch/arm/boot/dts/sun8i-a33-sinlinx-sina33.dts @@ -88,13 +88,13 @@ }; &cpu0_opp_table { - opp@1104000000 { + opp-1104000000 { opp-hz = /bits/ 64 <1104000000>; opp-microvolt = <1320000>; clock-latency-ns = <244144>; /* 8 32k periods */ }; - opp@1200000000 { + opp-1200000000 { opp-hz = /bits/ 64 <1200000000>; opp-microvolt = <1320000>; clock-latency-ns = <244144>; /* 8 32k periods */ diff --git a/arch/arm/boot/dts/sun8i-a33.dtsi b/arch/arm/boot/dts/sun8i-a33.dtsi index 013978259372..22660919bd08 100644 --- a/arch/arm/boot/dts/sun8i-a33.dtsi +++ b/arch/arm/boot/dts/sun8i-a33.dtsi @@ -50,73 +50,73 @@ compatible = "operating-points-v2"; opp-shared; - opp@120000000 { + opp-120000000 { opp-hz = /bits/ 64 <120000000>; opp-microvolt = <1040000>; clock-latency-ns = <244144>; /* 8 32k periods */ }; - opp@240000000 { + opp-240000000 { opp-hz = /bits/ 64 <240000000>; opp-microvolt = <1040000>; clock-latency-ns = <244144>; /* 8 32k periods */ }; - opp@312000000 { + opp-312000000 { opp-hz = /bits/ 64 <312000000>; opp-microvolt = <1040000>; clock-latency-ns = <244144>; /* 8 32k periods */ }; - opp@408000000 { + opp-408000000 { opp-hz = /bits/ 64 <408000000>; opp-microvolt = <1040000>; clock-latency-ns = <244144>; /* 8 32k periods */ }; - opp@480000000 { + opp-480000000 { opp-hz = /bits/ 64 <480000000>; opp-microvolt = <1040000>; clock-latency-ns = <244144>; /* 8 32k periods */ }; - opp@504000000 { + opp-504000000 { opp-hz = /bits/ 64 <504000000>; opp-microvolt = <1040000>; clock-latency-ns = <244144>; /* 8 32k periods */ }; - opp@600000000 { + opp-600000000 { opp-hz = /bits/ 64 <600000000>; opp-microvolt = <1040000>; clock-latency-ns = <244144>; /* 8 32k periods */ }; - opp@648000000 { + opp-648000000 { opp-hz = /bits/ 64 <648000000>; opp-microvolt = <1040000>; clock-latency-ns = <244144>; /* 8 32k periods */ }; - opp@720000000 { + opp-720000000 { opp-hz = /bits/ 64 <720000000>; opp-microvolt = <1100000>; clock-latency-ns = <244144>; /* 8 32k periods */ }; - opp@816000000 { + opp-816000000 { opp-hz = /bits/ 64 <816000000>; opp-microvolt = <1100000>; clock-latency-ns = <244144>; /* 8 32k periods */ }; - opp@912000000 { + opp-912000000 { opp-hz = /bits/ 64 <912000000>; opp-microvolt = <1200000>; clock-latency-ns = <244144>; /* 8 32k periods */ }; - opp@1008000000 { + opp-1008000000 { opp-hz = /bits/ 64 <1008000000>; opp-microvolt = <1200000>; clock-latency-ns = <244144>; /* 8 32k periods */ @@ -164,15 +164,15 @@ mali_opp_table: gpu-opp-table { compatible = "operating-points-v2"; - opp@144000000 { + opp-144000000 { opp-hz = /bits/ 64 <144000000>; }; - opp@240000000 { + opp-240000000 { opp-hz = /bits/ 64 <240000000>; }; - opp@384000000 { + opp-384000000 { opp-hz = /bits/ 64 <384000000>; }; }; -- cgit v1.2.3 From 4ee75fa55b7afd4cb65e378f0381f307bd63fa6c Mon Sep 17 00:00:00 2001 From: Quentin Schulz Date: Tue, 18 Apr 2017 09:34:18 +0200 Subject: ARM: dtsi: axp209: add battery power supply subnode The X-Powers AXP209 PMIC exposes battery supply various data such as the battery status (charging, discharging, full, dead), current max limit, current current, battery capacity (in percentage), voltage max and min limits, current voltage, and battery capacity (in Ah). This adds the battery power supply subnode for AXP20X PMIC. Signed-off-by: Quentin Schulz Acked-by: Maxime Ripard Acked-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/axp209.dtsi | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/axp209.dtsi b/arch/arm/boot/dts/axp209.dtsi index 9677dd5cf6b6..3c8fa26e87b7 100644 --- a/arch/arm/boot/dts/axp209.dtsi +++ b/arch/arm/boot/dts/axp209.dtsi @@ -64,6 +64,11 @@ #gpio-cells = <2>; }; + battery_power_supply: battery-power-supply { + compatible = "x-powers,axp209-battery-power-supply"; + status = "disabled"; + }; + regulators { /* Default work frequency for buck regulators */ x-powers,dcdc-freq = <1500>; -- cgit v1.2.3 From 4ec5c401269607903d59e11332fd55f43a4531e7 Mon Sep 17 00:00:00 2001 From: Quentin Schulz Date: Tue, 18 Apr 2017 09:34:19 +0200 Subject: ARM: dtsi: axp22x: add battery power supply subnode The X-Powers AXP22X PMIC exposes battery supply various data such as the battery status (charging, discharging, full, dead), current max limit, current current, battery capacity (in percentage), voltage max limit, current voltage, and battery capacity (in Ah). This adds the battery power supply subnode for AXP22X PMIC. Signed-off-by: Quentin Schulz Acked-by: Maxime Ripard Acked-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/axp22x.dtsi | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/axp22x.dtsi b/arch/arm/boot/dts/axp22x.dtsi index 67331c5f1714..87fb08e812ec 100644 --- a/arch/arm/boot/dts/axp22x.dtsi +++ b/arch/arm/boot/dts/axp22x.dtsi @@ -57,6 +57,11 @@ status = "disabled"; }; + battery_power_supply: battery-power-supply { + compatible = "x-powers,axp221-battery-power-supply"; + status = "disabled"; + }; + regulators { /* Default work frequency for buck regulators */ x-powers,dcdc-freq = <3000>; -- cgit v1.2.3 From e7c42f327bc8444205f4d258718648b32fcca04e Mon Sep 17 00:00:00 2001 From: Quentin Schulz Date: Tue, 18 Apr 2017 09:34:20 +0200 Subject: ARM: dts: sun8i: sina33: enable battery power supply subnode The Sinlinx SinA33 has an AXP223 PMIC and a battery connector, thus, we enable the battery power supply subnode in its Device Tree. Signed-off-by: Quentin Schulz Acked-by: Maxime Ripard Acked-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun8i-a33-sinlinx-sina33.dts | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/sun8i-a33-sinlinx-sina33.dts b/arch/arm/boot/dts/sun8i-a33-sinlinx-sina33.dts index 8a0b42a2c2da..433cf2a2a9a2 100644 --- a/arch/arm/boot/dts/sun8i-a33-sinlinx-sina33.dts +++ b/arch/arm/boot/dts/sun8i-a33-sinlinx-sina33.dts @@ -196,6 +196,10 @@ status = "okay"; }; +&battery_power_supply { + status = "okay"; +}; + ®_aldo1 { regulator-always-on; regulator-min-microvolt = <3000000>; -- cgit v1.2.3 From b9107d3798b8fdf6098be6672a5e181a35b918d0 Mon Sep 17 00:00:00 2001 From: Quentin Schulz Date: Tue, 18 Apr 2017 09:34:21 +0200 Subject: ARM: sun5i: chip: enable battery power supply subnode The NextThing Co. CHIP has an AXP209 PMIC with battery connector. This enables the battery power supply subnode. Signed-off-by: Quentin Schulz Acked-by: Maxime Ripard Acked-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun5i-r8-chip.dts | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/sun5i-r8-chip.dts b/arch/arm/boot/dts/sun5i-r8-chip.dts index d0785602663b..879a4b0f3bd5 100644 --- a/arch/arm/boot/dts/sun5i-r8-chip.dts +++ b/arch/arm/boot/dts/sun5i-r8-chip.dts @@ -132,6 +132,10 @@ status = "okay"; }; +&battery_power_supply { + status = "okay"; +}; + &i2c1 { pinctrl-names = "default"; pinctrl-0 = <&i2c1_pins_a>; -- cgit v1.2.3 From 9a26882a7378ade6a74f845d439c8ef39b1a4712 Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Fri, 21 Apr 2017 16:38:56 +0800 Subject: ARM: dts: sun6i: Add second display pipeline device nodes The Allwinner A31/A31s SoCs have 2 display pipelines, as in 2 display frontends, backends, and tcons each. The relationship between the backends and tcons are 1:1, but the frontends can feed either backend. Add device nodes and of graph nodes describing this relationship. Signed-off-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun6i-a31.dtsi | 168 ++++++++++++++++++++++++++++++++++++++- 1 file changed, 167 insertions(+), 1 deletion(-) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi index 9c999d3788f6..dfcf64515d7f 100644 --- a/arch/arm/boot/dts/sun6i-a31.dtsi +++ b/arch/arm/boot/dts/sun6i-a31.dtsi @@ -232,7 +232,7 @@ de: display-engine { compatible = "allwinner,sun6i-a31-display-engine"; - allwinner,pipelines = <&fe0>; + allwinner,pipelines = <&fe0>, <&fe1>; status = "disabled"; }; @@ -289,6 +289,43 @@ }; }; + tcon1: lcd-controller@01c0d000 { + compatible = "allwinner,sun6i-a31-tcon"; + reg = <0x01c0d000 0x1000>; + interrupts = ; + resets = <&ccu RST_AHB1_LCD1>; + reset-names = "lcd"; + clocks = <&ccu CLK_AHB1_LCD1>, + <&ccu CLK_LCD1_CH0>, + <&ccu CLK_LCD1_CH1>; + clock-names = "ahb", + "tcon-ch0", + "tcon-ch1"; + clock-output-names = "tcon1-pixel-clock"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + tcon1_in: port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + tcon1_in_drc1: endpoint@0 { + reg = <0>; + remote-endpoint = <&drc1_out_tcon1>; + }; + }; + + tcon1_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + }; + }; + mmc0: mmc@01c0f000 { compatible = "allwinner,sun7i-a20-mmc"; reg = <0x01c0f000 0x1000>; @@ -896,6 +933,130 @@ reg = <0>; remote-endpoint = <&be0_in_fe0>; }; + + fe0_out_be1: endpoint@1 { + reg = <1>; + remote-endpoint = <&be1_in_fe0>; + }; + }; + }; + }; + + fe1: display-frontend@01e20000 { + compatible = "allwinner,sun6i-a31-display-frontend"; + reg = <0x01e20000 0x20000>; + interrupts = ; + clocks = <&ccu CLK_AHB1_FE1>, <&ccu CLK_FE1>, + <&ccu CLK_DRAM_FE1>; + clock-names = "ahb", "mod", + "ram"; + resets = <&ccu RST_AHB1_FE1>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + fe1_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + fe1_out_be0: endpoint@0 { + reg = <0>; + remote-endpoint = <&be0_in_fe1>; + }; + + fe1_out_be1: endpoint@1 { + reg = <1>; + remote-endpoint = <&be1_in_fe1>; + }; + }; + }; + }; + + be1: display-backend@01e40000 { + compatible = "allwinner,sun6i-a31-display-backend"; + reg = <0x01e40000 0x10000>; + interrupts = ; + clocks = <&ccu CLK_AHB1_BE1>, <&ccu CLK_BE1>, + <&ccu CLK_DRAM_BE1>; + clock-names = "ahb", "mod", + "ram"; + resets = <&ccu RST_AHB1_BE1>; + + assigned-clocks = <&ccu CLK_BE1>; + assigned-clock-rates = <300000000>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + be1_in: port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + be1_in_fe0: endpoint@0 { + reg = <0>; + remote-endpoint = <&fe0_out_be1>; + }; + + be1_in_fe1: endpoint@1 { + reg = <1>; + remote-endpoint = <&fe1_out_be1>; + }; + }; + + be1_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + be1_out_drc1: endpoint@0 { + reg = <0>; + remote-endpoint = <&drc1_in_be1>; + }; + }; + }; + }; + + drc1: drc@01e50000 { + compatible = "allwinner,sun6i-a31-drc"; + reg = <0x01e50000 0x10000>; + interrupts = ; + clocks = <&ccu CLK_AHB1_DRC1>, <&ccu CLK_IEP_DRC1>, + <&ccu CLK_DRAM_DRC1>; + clock-names = "ahb", "mod", + "ram"; + resets = <&ccu RST_AHB1_DRC1>; + + assigned-clocks = <&ccu CLK_IEP_DRC1>; + assigned-clock-rates = <300000000>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + drc1_in: port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + drc1_in_be1: endpoint@0 { + reg = <0>; + remote-endpoint = <&be1_out_drc1>; + }; + }; + + drc1_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + drc1_out_tcon1: endpoint@0 { + reg = <0>; + remote-endpoint = <&tcon1_in_drc1>; + }; }; }; }; @@ -926,6 +1087,11 @@ reg = <0>; remote-endpoint = <&fe0_out_be0>; }; + + be0_in_fe1: endpoint@1 { + reg = <1>; + remote-endpoint = <&fe1_out_be0>; + }; }; be0_out: port@1 { -- cgit v1.2.3 From f89f2a37cc52d13e94c91e134055a9d70c4b6690 Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Fri, 21 Apr 2017 16:38:57 +0800 Subject: ARM: dts: sun6i: Enable tcon0 by default tcon0 contains a muxing register used to mux tcon output to downstream hdmi or mipi dsi encoders. tcon0 must be available for the mux to be configured. Whether the display subsystem is enabled or not is now solely controlled by the display-engine node. Signed-off-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun6i-a31-hummingbird.dts | 1 - arch/arm/boot/dts/sun6i-a31.dtsi | 1 - 2 files changed, 2 deletions(-) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/sun6i-a31-hummingbird.dts b/arch/arm/boot/dts/sun6i-a31-hummingbird.dts index b4c87a23e3f8..55607208468b 100644 --- a/arch/arm/boot/dts/sun6i-a31-hummingbird.dts +++ b/arch/arm/boot/dts/sun6i-a31-hummingbird.dts @@ -319,7 +319,6 @@ &tcon0 { pinctrl-names = "default"; pinctrl-0 = <&lcd0_rgb888_pins>; - status = "okay"; }; &tcon0_out { diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi index dfcf64515d7f..d0cede5aaeb5 100644 --- a/arch/arm/boot/dts/sun6i-a31.dtsi +++ b/arch/arm/boot/dts/sun6i-a31.dtsi @@ -264,7 +264,6 @@ "tcon-ch0", "tcon-ch1"; clock-output-names = "tcon0-pixel-clock"; - status = "disabled"; ports { #address-cells = <1>; -- cgit v1.2.3 From e407e25d4f925d7be6d51fc8bc262efe7876bcf8 Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Mon, 1 May 2017 11:14:07 +0800 Subject: ARM: sun8i: a83t: Drop leading zeroes from device node addresses Kbuild now complains about leading zeroes in the address portion of device node names. Get rid of them all, except for the uart device node. U-boot currently hard codes the device node path. We can remove the leading zero for the uart once we teach U-boot to use the aliases or stdout-path property. Signed-off-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun8i-a83t.dtsi | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/sun8i-a83t.dtsi b/arch/arm/boot/dts/sun8i-a83t.dtsi index 5f5c10c04dd3..aecde8be53bc 100644 --- a/arch/arm/boot/dts/sun8i-a83t.dtsi +++ b/arch/arm/boot/dts/sun8i-a83t.dtsi @@ -162,7 +162,7 @@ #size-cells = <1>; ranges; - pio: pinctrl@01c20800 { + pio: pinctrl@1c20800 { compatible = "allwinner,sun8i-a83t-pinctrl"; interrupts = , , @@ -193,7 +193,7 @@ }; }; - timer@01c20c00 { + timer@1c20c00 { compatible = "allwinner,sun4i-a10-timer"; reg = <0x01c20c00 0xa0>; interrupts = , @@ -201,7 +201,7 @@ clocks = <&osc24M>; }; - watchdog@01c20ca0 { + watchdog@1c20ca0 { compatible = "allwinner,sun6i-a31-wdt"; reg = <0x01c20ca0 0x20>; interrupts = ; @@ -218,7 +218,7 @@ status = "disabled"; }; - gic: interrupt-controller@01c81000 { + gic: interrupt-controller@1c81000 { compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic"; reg = <0x01c81000 0x1000>, <0x01c82000 0x2000>, -- cgit v1.2.3 From 62628be26caae02b9320494c2fc5feb7daf7c1ee Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Mon, 1 May 2017 11:14:08 +0800 Subject: ARM: sun8i: a83t: Replace underscores with hyphens in pinmux node names We should use hyphens and not underscores in device node names. Replace the ones that were just added. Signed-off-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun8i-a83t.dtsi | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/sun8i-a83t.dtsi b/arch/arm/boot/dts/sun8i-a83t.dtsi index aecde8be53bc..c0a1e4f74b89 100644 --- a/arch/arm/boot/dts/sun8i-a83t.dtsi +++ b/arch/arm/boot/dts/sun8i-a83t.dtsi @@ -174,7 +174,7 @@ #interrupt-cells = <3>; #gpio-cells = <3>; - mmc0_pins: mmc0_pins { + mmc0_pins: mmc0-pins { pins = "PF0", "PF1", "PF2", "PF3", "PF4", "PF5"; function = "mmc0"; @@ -182,12 +182,12 @@ bias-pull-up; }; - uart0_pb_pins: uart0_pb_pins { + uart0_pb_pins: uart0-pb-pins { pins = "PB9", "PB10"; function = "uart0"; }; - uart0_pf_pins: uart0_pf_pins { + uart0_pf_pins: uart0-pf-pins { pins = "PF2", "PF4"; function = "uart0"; }; -- cgit v1.2.3 From e20f04935176ec16f62c3c9c8b219490661aa10c Mon Sep 17 00:00:00 2001 From: Marcus Cooper Date: Wed, 10 May 2017 11:51:38 +0000 Subject: ARM: dts: sun8i-h3: orange-pi-2: Enable audio codec The Orange Pi 2 routes the LINEOUT pins through a SGM8900 PA which needs to be enabled. The onboard microphone is routed to MIC1, with MBIAS providing power. Signed-off-by: Marcus Cooper Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun8i-h3-orangepi-2.dts | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-2.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-2.dts index d7d5330c566f..8ff71b1bb45b 100644 --- a/arch/arm/boot/dts/sun8i-h3-orangepi-2.dts +++ b/arch/arm/boot/dts/sun8i-h3-orangepi-2.dts @@ -104,6 +104,15 @@ }; }; +&codec { + allwinner,pa-gpios = <&pio 0 16 GPIO_ACTIVE_HIGH>; /* PA16 */ + allwinner,audio-routing = + "Speaker", "LINEOUT", + "MIC1", "Mic", + "Mic", "MBIAS"; + status = "okay"; +}; + &ehci1 { status = "okay"; }; -- cgit v1.2.3 From 392aba5558843891cb938cbb8f3da1e1557c87c4 Mon Sep 17 00:00:00 2001 From: Oleksij Rempel Date: Sat, 6 May 2017 07:30:38 +0200 Subject: arm: dts: sun7i-a20-bananapi: name the GPIO lines This names the GPIO lines on the Banana Pi board in accordance with the A20_Banana_Pi v1.4 Specification. This will make these line names reflect through to user space so that they can easily be identified and used with the new character device ABI. Signed-off-by: Oleksij Rempel Reviewed-by: Linus Walleij Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun7i-a20-bananapi.dts | 51 ++++++++++++++++++++++++++++++++ 1 file changed, 51 insertions(+) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/sun7i-a20-bananapi.dts b/arch/arm/boot/dts/sun7i-a20-bananapi.dts index ed2f35adf542..88a1c2363c6c 100644 --- a/arch/arm/boot/dts/sun7i-a20-bananapi.dts +++ b/arch/arm/boot/dts/sun7i-a20-bananapi.dts @@ -177,6 +177,57 @@ }; &pio { + gpio-line-names = + /* PA */ + "ERXD3", "ERXD2", "ERXD1", "ERXD0", "ETXD3", + "ETXD2", "ETXD1", "ETXD0", + "ERXCK", "ERXERR", "ERXDV", "EMDC", "EMDIO", + "ETXEN", "ETXCK", "ECRS", + "ECOL", "ETXERR", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + /* PB */ + "PMU-SCK", "PMU-SDA", "", "", "", "", "", "", + "", "USB0-DRV", "", "", "", "", "", "", + "", "", "", "", "SCL", "SDA", "", "", + "", "", "", "", "", "", "", "", + /* PC */ + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + /* PD */ + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + /* PE */ + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + /* PF */ + "SD0-D1", "SD0-D0", "SD0-CLK", "SD0-CMD", "SD0-D3", + "SD0-D2", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + /* PG */ + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + /* PH */ + "TXD0", "RXD0", "IO-1", "PH3", "USB0-IDDET", "PH5", "", "", + "", "", "SD0-DET", "", "", "", "", "", + "", "", "", "", "IO-4", "IO-5", "", "EMAC-PWR-EN", + "LED1", "", "", "", "", "", "", "", + /* PI */ + "", "", "", "IO-GCLK", "", "", "", "", + "", "", "SPI-CE0", "SPI-CLK", "SPI-MOSI", + "SPI-MISO", "SPI-CE1", "", + "IO-6", "IO-3", "IO-2", "IO-0", "", "", "", "", + "", "", "", "", "", "", "", ""; + usb0_id_detect_pin: usb0_id_detect_pin@0 { pins = "PH4"; function = "gpio_in"; -- cgit v1.2.3 From 96800f036813c648cdd64918399bdd6768e68273 Mon Sep 17 00:00:00 2001 From: Andy Yan Date: Fri, 17 Mar 2017 18:18:39 +0100 Subject: ARM: dts: rockchip: rename core dtsi from RK1108 to RV1108 Rockchip finally named the SOC as RV1108, so change it for compatible. Signed-off-by: Andy Yan [adapt include in rk1108-evb.dts to not introduce errors] Signed-off-by: Heiko Stuebner --- arch/arm/boot/dts/rk1108-evb.dts | 2 +- arch/arm/boot/dts/rk1108.dtsi | 452 --------------------------------------- arch/arm/boot/dts/rv1108.dtsi | 452 +++++++++++++++++++++++++++++++++++++++ 3 files changed, 453 insertions(+), 453 deletions(-) delete mode 100644 arch/arm/boot/dts/rk1108.dtsi create mode 100644 arch/arm/boot/dts/rv1108.dtsi (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/rk1108-evb.dts b/arch/arm/boot/dts/rk1108-evb.dts index 3956cff4ca79..88fe0a8c4faa 100644 --- a/arch/arm/boot/dts/rk1108-evb.dts +++ b/arch/arm/boot/dts/rk1108-evb.dts @@ -40,7 +40,7 @@ /dts-v1/; -#include "rk1108.dtsi" +#include "rv1108.dtsi" / { model = "Rockchip RK1108 Evaluation board"; diff --git a/arch/arm/boot/dts/rk1108.dtsi b/arch/arm/boot/dts/rk1108.dtsi deleted file mode 100644 index 1297924db6ad..000000000000 --- a/arch/arm/boot/dts/rk1108.dtsi +++ /dev/null @@ -1,452 +0,0 @@ -/* - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ - -#include -#include -#include -#include -#include -/ { - #address-cells = <1>; - #size-cells = <1>; - - compatible = "rockchip,rk1108"; - - interrupt-parent = <&gic>; - - aliases { - serial0 = &uart0; - serial1 = &uart1; - serial2 = &uart2; - }; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - cpu0: cpu@f00 { - device_type = "cpu"; - compatible = "arm,cortex-a7"; - reg = <0xf00>; - }; - }; - - arm-pmu { - compatible = "arm,cortex-a7-pmu"; - interrupts = ; - }; - - timer { - compatible = "arm,armv7-timer"; - interrupts = , - ; - clock-frequency = <24000000>; - }; - - xin24m: oscillator { - compatible = "fixed-clock"; - clock-frequency = <24000000>; - clock-output-names = "xin24m"; - #clock-cells = <0>; - }; - - amba { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges; - - pdma: pdma@102a0000 { - compatible = "arm,pl330", "arm,primecell"; - reg = <0x102a0000 0x4000>; - interrupts = ; - #dma-cells = <1>; - arm,pl330-broken-no-flushp; - clocks = <&cru ACLK_DMAC>; - clock-names = "apb_pclk"; - }; - }; - - bus_intmem@10080000 { - compatible = "mmio-sram"; - reg = <0x10080000 0x2000>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x10080000 0x2000>; - }; - - uart2: serial@10210000 { - compatible = "rockchip,rk1108-uart", "snps,dw-apb-uart"; - reg = <0x10210000 0x100>; - interrupts = ; - reg-shift = <2>; - reg-io-width = <4>; - clock-frequency = <24000000>; - clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>; - clock-names = "baudclk", "apb_pclk"; - pinctrl-names = "default"; - pinctrl-0 = <&uart2m0_xfer>; - status = "disabled"; - }; - - uart1: serial@10220000 { - compatible = "rockchip,rk1108-uart", "snps,dw-apb-uart"; - reg = <0x10220000 0x100>; - interrupts = ; - reg-shift = <2>; - reg-io-width = <4>; - clock-frequency = <24000000>; - clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>; - clock-names = "baudclk", "apb_pclk"; - pinctrl-names = "default"; - pinctrl-0 = <&uart1_xfer>; - status = "disabled"; - }; - - uart0: serial@10230000 { - compatible = "rockchip,rk1108-uart", "snps,dw-apb-uart"; - reg = <0x10230000 0x100>; - interrupts = ; - reg-shift = <2>; - reg-io-width = <4>; - clock-frequency = <24000000>; - clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>; - clock-names = "baudclk", "apb_pclk"; - pinctrl-names = "default"; - pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>; - status = "disabled"; - }; - - grf: syscon@10300000 { - compatible = "rockchip,rk1108-grf", "syscon"; - reg = <0x10300000 0x1000>; - }; - - pmugrf: syscon@20060000 { - compatible = "rockchip,rk1108-pmugrf", "syscon"; - reg = <0x20060000 0x1000>; - }; - - cru: clock-controller@20200000 { - compatible = "rockchip,rk1108-cru"; - reg = <0x20200000 0x1000>; - rockchip,grf = <&grf>; - #clock-cells = <1>; - #reset-cells = <1>; - }; - - emmc: dwmmc@30110000 { - compatible = "rockchip,rk1108-dw-mshc", "rockchip,rk3288-dw-mshc"; - clock-freq-min-max = <400000 150000000>; - clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>, - <&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>; - clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; - fifo-depth = <0x100>; - interrupts = ; - reg = <0x30110000 0x4000>; - status = "disabled"; - }; - - sdio: dwmmc@30120000 { - compatible = "rockchip,rk1108-dw-mshc", "rockchip,rk3288-dw-mshc"; - clock-freq-min-max = <400000 150000000>; - clocks = <&cru HCLK_SDIO>, <&cru SCLK_SDIO>, - <&cru SCLK_SDIO_DRV>, <&cru SCLK_SDIO_SAMPLE>; - clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; - fifo-depth = <0x100>; - interrupts = ; - reg = <0x30120000 0x4000>; - status = "disabled"; - }; - - sdmmc: dwmmc@30130000 { - compatible = "rockchip,rk1108-dw-mshc", "rockchip,rk3288-dw-mshc"; - clock-freq-min-max = <400000 100000000>; - clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>, - <&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>; - clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; - fifo-depth = <0x100>; - interrupts = ; - reg = <0x30130000 0x4000>; - status = "disabled"; - }; - - gic: interrupt-controller@32010000 { - compatible = "arm,gic-400"; - interrupt-controller; - #interrupt-cells = <3>; - #address-cells = <0>; - - reg = <0x32011000 0x1000>, - <0x32012000 0x2000>, - <0x32014000 0x2000>, - <0x32016000 0x2000>; - interrupts = ; - }; - - pinctrl: pinctrl { - compatible = "rockchip,rv1108-pinctrl"; - rockchip,grf = <&grf>; - rockchip,pmu = <&pmugrf>; - #address-cells = <1>; - #size-cells = <1>; - ranges; - - gpio0: gpio0@20030000 { - compatible = "rockchip,gpio-bank"; - reg = <0x20030000 0x100>; - interrupts = ; - clocks = <&xin24m>; - - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpio1: gpio1@10310000 { - compatible = "rockchip,gpio-bank"; - reg = <0x10310000 0x100>; - interrupts = ; - clocks = <&xin24m>; - - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpio2: gpio2@10320000 { - compatible = "rockchip,gpio-bank"; - reg = <0x10320000 0x100>; - interrupts = ; - clocks = <&xin24m>; - - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpio3: gpio3@10330000 { - compatible = "rockchip,gpio-bank"; - reg = <0x10330000 0x100>; - interrupts = ; - clocks = <&xin24m>; - - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - pcfg_pull_up: pcfg-pull-up { - bias-pull-up; - }; - - pcfg_pull_down: pcfg-pull-down { - bias-pull-down; - }; - - pcfg_pull_none: pcfg-pull-none { - bias-disable; - }; - - pcfg_pull_none_drv_8ma: pcfg-pull-none-drv-8ma { - drive-strength = <8>; - }; - - pcfg_pull_none_drv_12ma: pcfg-pull-none-drv-12ma { - drive-strength = <12>; - }; - - pcfg_pull_up_drv_8ma: pcfg-pull-up-drv-8ma { - bias-pull-up; - drive-strength = <8>; - }; - - pcfg_pull_none_drv_4ma: pcfg-pull-none-drv-4ma { - drive-strength = <4>; - }; - - pcfg_pull_up_drv_4ma: pcfg-pull-up-drv-4ma { - bias-pull-up; - drive-strength = <4>; - }; - - pcfg_output_high: pcfg-output-high { - output-high; - }; - - pcfg_output_low: pcfg-output-low { - output-low; - }; - - pcfg_input_high: pcfg-input-high { - bias-pull-up; - input-enable; - }; - - i2c1 { - i2c1_xfer: i2c1-xfer { - rockchip,pins = <2 RK_PD3 RK_FUNC_1 &pcfg_pull_up>, - <2 RK_PD4 RK_FUNC_1 &pcfg_pull_up>; - }; - }; - - i2c2m1 { - i2c2m1_xfer: i2c2m1-xfer { - rockchip,pins = <0 RK_PC2 RK_FUNC_2 &pcfg_pull_none>, - <0 RK_PC6 RK_FUNC_3 &pcfg_pull_none>; - }; - - i2c2m1_gpio: i2c2m1-gpio { - rockchip,pins = <0 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>, - <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - i2c2m05v { - i2c2m05v_xfer: i2c2m05v-xfer { - rockchip,pins = <1 RK_PD5 RK_FUNC_2 &pcfg_pull_none>, - <1 RK_PD4 RK_FUNC_2 &pcfg_pull_none>; - }; - - i2c2m05v_gpio: i2c2m05v-gpio { - rockchip,pins = <1 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>, - <1 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - i2c3 { - i2c3_xfer: i2c3-xfer { - rockchip,pins = <0 RK_PB6 RK_FUNC_1 &pcfg_pull_none>, - <0 RK_PC4 RK_FUNC_2 &pcfg_pull_none>; - }; - }; - - sdmmc { - sdmmc_clk: sdmmc-clk { - rockchip,pins = <3 RK_PC4 RK_FUNC_1 &pcfg_pull_none_drv_4ma>; - }; - - sdmmc_cmd: sdmmc-cmd { - rockchip,pins = <3 RK_PC5 RK_FUNC_1 &pcfg_pull_up_drv_4ma>; - }; - - sdmmc_cd: sdmmc-cd { - rockchip,pins = <0 RK_PA1 RK_FUNC_1 &pcfg_pull_up_drv_4ma>; - }; - - sdmmc_bus1: sdmmc-bus1 { - rockchip,pins = <3 RK_PC3 RK_FUNC_1 &pcfg_pull_up_drv_4ma>; - }; - - sdmmc_bus4: sdmmc-bus4 { - rockchip,pins = <3 RK_PC3 RK_FUNC_1 &pcfg_pull_up_drv_4ma>, - <3 RK_PC2 RK_FUNC_1 &pcfg_pull_up_drv_4ma>, - <3 RK_PC1 RK_FUNC_1 &pcfg_pull_up_drv_4ma>, - <3 RK_PC0 RK_FUNC_1 &pcfg_pull_up_drv_4ma>; - }; - }; - - uart0 { - uart0_xfer: uart0-xfer { - rockchip,pins = <3 RK_PA6 RK_FUNC_1 &pcfg_pull_up>, - <3 RK_PA5 RK_FUNC_1 &pcfg_pull_none>; - }; - - uart0_cts: uart0-cts { - rockchip,pins = <3 RK_PA4 RK_FUNC_1 &pcfg_pull_none>; - }; - - uart0_rts: uart0-rts { - rockchip,pins = <3 RK_PA3 RK_FUNC_1 &pcfg_pull_none>; - }; - - uart0_rts_gpio: uart0-rts-gpio { - rockchip,pins = <3 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - uart1 { - uart1_xfer: uart1-xfer { - rockchip,pins = <1 RK_PD3 RK_FUNC_1 &pcfg_pull_up>, - <1 RK_PD2 RK_FUNC_1 &pcfg_pull_none>; - }; - - uart1_cts: uart1-cts { - rockchip,pins = <1 RK_PD0 RK_FUNC_1 &pcfg_pull_none>; - }; - - uart1_rts: uart1-rts { - rockchip,pins = <1 RK_PD1 RK_FUNC_1 &pcfg_pull_none>; - }; - }; - - uart2m0 { - uart2m0_xfer: uart2m0-xfer { - rockchip,pins = <2 RK_PD2 RK_FUNC_1 &pcfg_pull_up>, - <2 RK_PD1 RK_FUNC_1 &pcfg_pull_none>; - }; - }; - - uart2m1 { - uart2m1_xfer: uart2m1-xfer { - rockchip,pins = <3 RK_PC3 RK_FUNC_2 &pcfg_pull_up>, - <3 RK_PC2 RK_FUNC_2 &pcfg_pull_none>; - }; - }; - - uart2_5v { - uart2_5v_cts: uart2_5v-cts { - rockchip,pins = <1 RK_PD4 RK_FUNC_1 &pcfg_pull_none>; - }; - - uart2_5v_rts: uart2_5v-rts { - rockchip,pins = <1 RK_PD5 RK_FUNC_1 &pcfg_pull_none>; - }; - }; - }; -}; diff --git a/arch/arm/boot/dts/rv1108.dtsi b/arch/arm/boot/dts/rv1108.dtsi new file mode 100644 index 000000000000..437098b556eb --- /dev/null +++ b/arch/arm/boot/dts/rv1108.dtsi @@ -0,0 +1,452 @@ +/* + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include +#include +#include +#include +#include +/ { + #address-cells = <1>; + #size-cells = <1>; + + compatible = "rockchip,rv1108"; + + interrupt-parent = <&gic>; + + aliases { + serial0 = &uart0; + serial1 = &uart1; + serial2 = &uart2; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@f00 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0xf00>; + }; + }; + + arm-pmu { + compatible = "arm,cortex-a7-pmu"; + interrupts = ; + }; + + timer { + compatible = "arm,armv7-timer"; + interrupts = , + ; + clock-frequency = <24000000>; + }; + + xin24m: oscillator { + compatible = "fixed-clock"; + clock-frequency = <24000000>; + clock-output-names = "xin24m"; + #clock-cells = <0>; + }; + + amba { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + pdma: pdma@102a0000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x102a0000 0x4000>; + interrupts = ; + #dma-cells = <1>; + arm,pl330-broken-no-flushp; + clocks = <&cru ACLK_DMAC>; + clock-names = "apb_pclk"; + }; + }; + + bus_intmem@10080000 { + compatible = "mmio-sram"; + reg = <0x10080000 0x2000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x10080000 0x2000>; + }; + + uart2: serial@10210000 { + compatible = "rockchip,rv1108-uart", "snps,dw-apb-uart"; + reg = <0x10210000 0x100>; + interrupts = ; + reg-shift = <2>; + reg-io-width = <4>; + clock-frequency = <24000000>; + clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>; + clock-names = "baudclk", "apb_pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&uart2m0_xfer>; + status = "disabled"; + }; + + uart1: serial@10220000 { + compatible = "rockchip,rv1108-uart", "snps,dw-apb-uart"; + reg = <0x10220000 0x100>; + interrupts = ; + reg-shift = <2>; + reg-io-width = <4>; + clock-frequency = <24000000>; + clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>; + clock-names = "baudclk", "apb_pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&uart1_xfer>; + status = "disabled"; + }; + + uart0: serial@10230000 { + compatible = "rockchip,rv1108-uart", "snps,dw-apb-uart"; + reg = <0x10230000 0x100>; + interrupts = ; + reg-shift = <2>; + reg-io-width = <4>; + clock-frequency = <24000000>; + clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>; + clock-names = "baudclk", "apb_pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>; + status = "disabled"; + }; + + grf: syscon@10300000 { + compatible = "rockchip,rv1108-grf", "syscon"; + reg = <0x10300000 0x1000>; + }; + + pmugrf: syscon@20060000 { + compatible = "rockchip,rv1108-pmugrf", "syscon"; + reg = <0x20060000 0x1000>; + }; + + cru: clock-controller@20200000 { + compatible = "rockchip,rv1108-cru"; + reg = <0x20200000 0x1000>; + rockchip,grf = <&grf>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + emmc: dwmmc@30110000 { + compatible = "rockchip,rv1108-dw-mshc", "rockchip,rk3288-dw-mshc"; + clock-freq-min-max = <400000 150000000>; + clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>, + <&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>; + clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; + fifo-depth = <0x100>; + interrupts = ; + reg = <0x30110000 0x4000>; + status = "disabled"; + }; + + sdio: dwmmc@30120000 { + compatible = "rockchip,rv1108-dw-mshc", "rockchip,rk3288-dw-mshc"; + clock-freq-min-max = <400000 150000000>; + clocks = <&cru HCLK_SDIO>, <&cru SCLK_SDIO>, + <&cru SCLK_SDIO_DRV>, <&cru SCLK_SDIO_SAMPLE>; + clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; + fifo-depth = <0x100>; + interrupts = ; + reg = <0x30120000 0x4000>; + status = "disabled"; + }; + + sdmmc: dwmmc@30130000 { + compatible = "rockchip,rv1108-dw-mshc", "rockchip,rk3288-dw-mshc"; + clock-freq-min-max = <400000 100000000>; + clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>, + <&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>; + clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; + fifo-depth = <0x100>; + interrupts = ; + reg = <0x30130000 0x4000>; + status = "disabled"; + }; + + gic: interrupt-controller@32010000 { + compatible = "arm,gic-400"; + interrupt-controller; + #interrupt-cells = <3>; + #address-cells = <0>; + + reg = <0x32011000 0x1000>, + <0x32012000 0x2000>, + <0x32014000 0x2000>, + <0x32016000 0x2000>; + interrupts = ; + }; + + pinctrl: pinctrl { + compatible = "rockchip,rv1108-pinctrl"; + rockchip,grf = <&grf>; + rockchip,pmu = <&pmugrf>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + gpio0: gpio0@20030000 { + compatible = "rockchip,gpio-bank"; + reg = <0x20030000 0x100>; + interrupts = ; + clocks = <&xin24m>; + + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio1: gpio1@10310000 { + compatible = "rockchip,gpio-bank"; + reg = <0x10310000 0x100>; + interrupts = ; + clocks = <&xin24m>; + + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio2: gpio2@10320000 { + compatible = "rockchip,gpio-bank"; + reg = <0x10320000 0x100>; + interrupts = ; + clocks = <&xin24m>; + + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio3: gpio3@10330000 { + compatible = "rockchip,gpio-bank"; + reg = <0x10330000 0x100>; + interrupts = ; + clocks = <&xin24m>; + + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + pcfg_pull_up: pcfg-pull-up { + bias-pull-up; + }; + + pcfg_pull_down: pcfg-pull-down { + bias-pull-down; + }; + + pcfg_pull_none: pcfg-pull-none { + bias-disable; + }; + + pcfg_pull_none_drv_8ma: pcfg-pull-none-drv-8ma { + drive-strength = <8>; + }; + + pcfg_pull_none_drv_12ma: pcfg-pull-none-drv-12ma { + drive-strength = <12>; + }; + + pcfg_pull_up_drv_8ma: pcfg-pull-up-drv-8ma { + bias-pull-up; + drive-strength = <8>; + }; + + pcfg_pull_none_drv_4ma: pcfg-pull-none-drv-4ma { + drive-strength = <4>; + }; + + pcfg_pull_up_drv_4ma: pcfg-pull-up-drv-4ma { + bias-pull-up; + drive-strength = <4>; + }; + + pcfg_output_high: pcfg-output-high { + output-high; + }; + + pcfg_output_low: pcfg-output-low { + output-low; + }; + + pcfg_input_high: pcfg-input-high { + bias-pull-up; + input-enable; + }; + + i2c1 { + i2c1_xfer: i2c1-xfer { + rockchip,pins = <2 RK_PD3 RK_FUNC_1 &pcfg_pull_up>, + <2 RK_PD4 RK_FUNC_1 &pcfg_pull_up>; + }; + }; + + i2c2m1 { + i2c2m1_xfer: i2c2m1-xfer { + rockchip,pins = <0 RK_PC2 RK_FUNC_2 &pcfg_pull_none>, + <0 RK_PC6 RK_FUNC_3 &pcfg_pull_none>; + }; + + i2c2m1_gpio: i2c2m1-gpio { + rockchip,pins = <0 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>, + <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + i2c2m05v { + i2c2m05v_xfer: i2c2m05v-xfer { + rockchip,pins = <1 RK_PD5 RK_FUNC_2 &pcfg_pull_none>, + <1 RK_PD4 RK_FUNC_2 &pcfg_pull_none>; + }; + + i2c2m05v_gpio: i2c2m05v-gpio { + rockchip,pins = <1 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>, + <1 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + i2c3 { + i2c3_xfer: i2c3-xfer { + rockchip,pins = <0 RK_PB6 RK_FUNC_1 &pcfg_pull_none>, + <0 RK_PC4 RK_FUNC_2 &pcfg_pull_none>; + }; + }; + + sdmmc { + sdmmc_clk: sdmmc-clk { + rockchip,pins = <3 RK_PC4 RK_FUNC_1 &pcfg_pull_none_drv_4ma>; + }; + + sdmmc_cmd: sdmmc-cmd { + rockchip,pins = <3 RK_PC5 RK_FUNC_1 &pcfg_pull_up_drv_4ma>; + }; + + sdmmc_cd: sdmmc-cd { + rockchip,pins = <0 RK_PA1 RK_FUNC_1 &pcfg_pull_up_drv_4ma>; + }; + + sdmmc_bus1: sdmmc-bus1 { + rockchip,pins = <3 RK_PC3 RK_FUNC_1 &pcfg_pull_up_drv_4ma>; + }; + + sdmmc_bus4: sdmmc-bus4 { + rockchip,pins = <3 RK_PC3 RK_FUNC_1 &pcfg_pull_up_drv_4ma>, + <3 RK_PC2 RK_FUNC_1 &pcfg_pull_up_drv_4ma>, + <3 RK_PC1 RK_FUNC_1 &pcfg_pull_up_drv_4ma>, + <3 RK_PC0 RK_FUNC_1 &pcfg_pull_up_drv_4ma>; + }; + }; + + uart0 { + uart0_xfer: uart0-xfer { + rockchip,pins = <3 RK_PA6 RK_FUNC_1 &pcfg_pull_up>, + <3 RK_PA5 RK_FUNC_1 &pcfg_pull_none>; + }; + + uart0_cts: uart0-cts { + rockchip,pins = <3 RK_PA4 RK_FUNC_1 &pcfg_pull_none>; + }; + + uart0_rts: uart0-rts { + rockchip,pins = <3 RK_PA3 RK_FUNC_1 &pcfg_pull_none>; + }; + + uart0_rts_gpio: uart0-rts-gpio { + rockchip,pins = <3 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + uart1 { + uart1_xfer: uart1-xfer { + rockchip,pins = <1 RK_PD3 RK_FUNC_1 &pcfg_pull_up>, + <1 RK_PD2 RK_FUNC_1 &pcfg_pull_none>; + }; + + uart1_cts: uart1-cts { + rockchip,pins = <1 RK_PD0 RK_FUNC_1 &pcfg_pull_none>; + }; + + uart1_rts: uart1-rts { + rockchip,pins = <1 RK_PD1 RK_FUNC_1 &pcfg_pull_none>; + }; + }; + + uart2m0 { + uart2m0_xfer: uart2m0-xfer { + rockchip,pins = <2 RK_PD2 RK_FUNC_1 &pcfg_pull_up>, + <2 RK_PD1 RK_FUNC_1 &pcfg_pull_none>; + }; + }; + + uart2m1 { + uart2m1_xfer: uart2m1-xfer { + rockchip,pins = <3 RK_PC3 RK_FUNC_2 &pcfg_pull_up>, + <3 RK_PC2 RK_FUNC_2 &pcfg_pull_none>; + }; + }; + + uart2_5v { + uart2_5v_cts: uart2_5v-cts { + rockchip,pins = <1 RK_PD4 RK_FUNC_1 &pcfg_pull_none>; + }; + + uart2_5v_rts: uart2_5v-rts { + rockchip,pins = <1 RK_PD5 RK_FUNC_1 &pcfg_pull_none>; + }; + }; + }; +}; -- cgit v1.2.3 From 5be21d0a0f487f779d6e1e72790852769e9d976f Mon Sep 17 00:00:00 2001 From: Andy Yan Date: Fri, 17 Mar 2017 18:18:40 +0100 Subject: ARM: dts: rockchip: rename RK1108-evb to RV1108-evb Rockchip finally named the SOC as RV1108, so change it for compatible. The rk1108/rv1108 is completely new to the market, so there no real devices exist in the wild, only the Rockchip internal evaluation board. Therefore we're not breaking any existing devices when changing compatible values. Signed-off-by: Andy Yan Acked-by: Rob Herring [added paragraph about no real devices existing] Signed-off-by: Heiko Stuebner --- Documentation/devicetree/bindings/arm/rockchip.txt | 4 +- arch/arm/boot/dts/Makefile | 2 +- arch/arm/boot/dts/rk1108-evb.dts | 69 ---------------------- arch/arm/boot/dts/rv1108-evb.dts | 69 ++++++++++++++++++++++ 4 files changed, 72 insertions(+), 72 deletions(-) delete mode 100644 arch/arm/boot/dts/rk1108-evb.dts create mode 100644 arch/arm/boot/dts/rv1108-evb.dts (limited to 'arch/arm/boot') diff --git a/Documentation/devicetree/bindings/arm/rockchip.txt b/Documentation/devicetree/bindings/arm/rockchip.txt index c965d99e86c2..7b4847420ab5 100644 --- a/Documentation/devicetree/bindings/arm/rockchip.txt +++ b/Documentation/devicetree/bindings/arm/rockchip.txt @@ -138,9 +138,9 @@ Rockchip platforms device tree bindings Required root node properties: - compatible = "rockchip,px5-evb", "rockchip,px5", "rockchip,rk3368"; -- Rockchip RK1108 Evaluation board +- Rockchip RV1108 Evaluation board Required root node properties: - - compatible = "rockchip,rk1108-evb", "rockchip,rk1108"; + - compatible = "rockchip,rv1108-evb", "rockchip,rv1108"; - Rockchip RK3368 evb: Required root node properties: diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 9c5e1d944d1c..32537f8c9e41 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -718,7 +718,7 @@ dtb-$(CONFIG_ARCH_RENESAS) += \ r8a7794-silk.dtb \ sh73a0-kzm9g.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += \ - rk1108-evb.dtb \ + rv1108-evb.dtb \ rk3036-evb.dtb \ rk3036-kylin.dtb \ rk3066a-bqcurie2.dtb \ diff --git a/arch/arm/boot/dts/rk1108-evb.dts b/arch/arm/boot/dts/rk1108-evb.dts deleted file mode 100644 index 88fe0a8c4faa..000000000000 --- a/arch/arm/boot/dts/rk1108-evb.dts +++ /dev/null @@ -1,69 +0,0 @@ -/* - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ - -/dts-v1/; - -#include "rv1108.dtsi" - -/ { - model = "Rockchip RK1108 Evaluation board"; - compatible = "rockchip,rk1108-evb", "rockchip,rk1108"; - - memory@60000000 { - device_type = "memory"; - reg = <0x60000000 0x08000000>; - }; - - chosen { - stdout-path = "serial2:1500000n8"; - }; -}; - -&uart0 { - status = "okay"; -}; - -&uart1 { - status = "okay"; -}; - -&uart2 { - status = "okay"; -}; diff --git a/arch/arm/boot/dts/rv1108-evb.dts b/arch/arm/boot/dts/rv1108-evb.dts new file mode 100644 index 000000000000..58cf4ac079c3 --- /dev/null +++ b/arch/arm/boot/dts/rv1108-evb.dts @@ -0,0 +1,69 @@ +/* + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; + +#include "rv1108.dtsi" + +/ { + model = "Rockchip RV1108 Evaluation board"; + compatible = "rockchip,rv1108-evb", "rockchip,rv1108"; + + memory@60000000 { + device_type = "memory"; + reg = <0x60000000 0x08000000>; + }; + + chosen { + stdout-path = "serial2:1500000n8"; + }; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; -- cgit v1.2.3 From 1b1ec50366a87ed84ac07db9a09c56ac7cafb367 Mon Sep 17 00:00:00 2001 From: Tim Harvey Date: Mon, 10 Apr 2017 13:58:10 -0700 Subject: ARM: dts: imx: ventana: fix DTC warnings Remove the sky2 ethernet device node from the pcie controller which was invalid to begin with. The original intent was to allow the bootloader to populate the MAC via dt but this requires the PCI bus topology to be complete in dt as well and as these boards have an expansion connector that topology is dynamic and can't be represented here. Signed-off-by: Tim Harvey Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6q-gw5400-a.dts | 5 ----- arch/arm/boot/dts/imx6qdl-gw53xx.dtsi | 5 ----- arch/arm/boot/dts/imx6qdl-gw54xx.dtsi | 5 ----- 3 files changed, 15 deletions(-) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/imx6q-gw5400-a.dts b/arch/arm/boot/dts/imx6q-gw5400-a.dts index 8e84713f42c0..687ab911c13f 100644 --- a/arch/arm/boot/dts/imx6q-gw5400-a.dts +++ b/arch/arm/boot/dts/imx6q-gw5400-a.dts @@ -19,7 +19,6 @@ /* these are used by bootloader for disabling nodes */ aliases { - ethernet1 = ð1; i2c0 = &i2c1; i2c1 = &i2c2; i2c2 = &i2c3; @@ -347,10 +346,6 @@ &pcie { reset-gpio = <&gpio1 29 GPIO_ACTIVE_LOW>; status = "okay"; - - eth1: sky2@8 { /* MAC/PHY on bus 8 */ - compatible = "marvell,sky2"; - }; }; &ssi1 { diff --git a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi index a208e7e0dc6e..5bc6ed1a5b35 100644 --- a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi @@ -14,7 +14,6 @@ / { /* these are used by bootloader for disabling nodes */ aliases { - ethernet1 = ð1; led0 = &led0; led1 = &led1; led2 = &led2; @@ -342,10 +341,6 @@ pinctrl-0 = <&pinctrl_pcie>; reset-gpio = <&gpio1 29 GPIO_ACTIVE_LOW>; status = "okay"; - - eth1: sky2@8 { /* MAC/PHY on bus 8 */ - compatible = "marvell,sky2"; - }; }; &pwm2 { diff --git a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi index 968fda94d14b..66fcf838e964 100644 --- a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi @@ -14,7 +14,6 @@ / { /* these are used by bootloader for disabling nodes */ aliases { - ethernet1 = ð1; led0 = &led0; led1 = &led1; led2 = &led2; @@ -379,10 +378,6 @@ pinctrl-0 = <&pinctrl_pcie>; reset-gpio = <&gpio1 29 GPIO_ACTIVE_LOW>; status = "okay"; - - eth1: sky2@8 { /* MAC/PHY on bus 8 */ - compatible = "marvell,sky2"; - }; }; &pwm1 { -- cgit v1.2.3 From e761b82ef22269b4e4fdf1a4d397c09522bc5d54 Mon Sep 17 00:00:00 2001 From: Lucas Stach Date: Wed, 12 Apr 2017 18:45:59 +0200 Subject: ARM: dts: imx6: adopt DT to new GPC binding Adopt the i.MX6Q/DL DT to the new and more flexible GPC binding. Signed-off-by: Lucas Stach Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6q.dtsi | 2 +- arch/arm/boot/dts/imx6qdl.dtsi | 37 ++++++++++++++++++++++++++----------- 2 files changed, 27 insertions(+), 12 deletions(-) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi index e9a5d0b8c7b0..dd33849335b2 100644 --- a/arch/arm/boot/dts/imx6q.dtsi +++ b/arch/arm/boot/dts/imx6q.dtsi @@ -125,7 +125,7 @@ clocks = <&clks IMX6QDL_CLK_OPENVG_AXI>, <&clks IMX6QDL_CLK_GPU2D_CORE>; clock-names = "bus", "core"; - power-domains = <&gpc 1>; + power-domains = <&pd_pu>; }; ipu2: ipu@02800000 { diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi index e426faa9c243..2c2af6737b0e 100644 --- a/arch/arm/boot/dts/imx6qdl.dtsi +++ b/arch/arm/boot/dts/imx6qdl.dtsi @@ -156,7 +156,7 @@ <&clks IMX6QDL_CLK_GPU3D_CORE>, <&clks IMX6QDL_CLK_GPU3D_SHADER>; clock-names = "bus", "core", "shader"; - power-domains = <&gpc 1>; + power-domains = <&pd_pu>; }; gpu_2d: gpu@00134000 { @@ -166,7 +166,7 @@ clocks = <&clks IMX6QDL_CLK_GPU2D_AXI>, <&clks IMX6QDL_CLK_GPU2D_CORE>; clock-names = "bus", "core"; - power-domains = <&gpc 1>; + power-domains = <&pd_pu>; }; timer@00a00600 { @@ -434,7 +434,7 @@ clocks = <&clks IMX6QDL_CLK_VPU_AXI>, <&clks IMX6QDL_CLK_MMDC_CH0_AXI>; clock-names = "per", "ahb"; - power-domains = <&gpc 1>; + power-domains = <&pd_pu>; resets = <&src 1>; iram = <&ocram>; }; @@ -797,14 +797,29 @@ interrupts = <0 89 IRQ_TYPE_LEVEL_HIGH>, <0 90 IRQ_TYPE_LEVEL_HIGH>; interrupt-parent = <&intc>; - pu-supply = <®_pu>; - clocks = <&clks IMX6QDL_CLK_GPU3D_CORE>, - <&clks IMX6QDL_CLK_GPU3D_SHADER>, - <&clks IMX6QDL_CLK_GPU2D_CORE>, - <&clks IMX6QDL_CLK_GPU2D_AXI>, - <&clks IMX6QDL_CLK_OPENVG_AXI>, - <&clks IMX6QDL_CLK_VPU_AXI>; - #power-domain-cells = <1>; + clocks = <&clks IMX6QDL_CLK_IPG>; + clock-names = "ipg"; + + pgc { + #address-cells = <1>; + #size-cells = <0>; + + power-domain@0 { + reg = <0>; + #power-domain-cells = <0>; + }; + pd_pu: power-domain@1 { + reg = <1>; + #power-domain-cells = <0>; + power-supply = <®_pu>; + clocks = <&clks IMX6QDL_CLK_GPU3D_CORE>, + <&clks IMX6QDL_CLK_GPU3D_SHADER>, + <&clks IMX6QDL_CLK_GPU2D_CORE>, + <&clks IMX6QDL_CLK_GPU2D_AXI>, + <&clks IMX6QDL_CLK_OPENVG_AXI>, + <&clks IMX6QDL_CLK_VPU_AXI>; + }; + }; }; gpr: iomuxc-gpr@020e0000 { -- cgit v1.2.3 From 6447a053ddf6e3e42af6c8e1c65a8ec2b367abbc Mon Sep 17 00:00:00 2001 From: Lucas Stach Date: Wed, 12 Apr 2017 18:46:00 +0200 Subject: ARM: dts: imx6qp: add specific compatible for GPC Add the more specific QuadPlus compatible to the GPC node, to trigger the required workarounds in the power domain code. In regard to the interrupt mapping the QuadPlus controller is fully compatible to the Quad one, so keep that compatible in place. Signed-off-by: Lucas Stach Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6qp.dtsi | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/imx6qp.dtsi b/arch/arm/boot/dts/imx6qp.dtsi index 59453f2ac4ba..299d863690c5 100644 --- a/arch/arm/boot/dts/imx6qp.dtsi +++ b/arch/arm/boot/dts/imx6qp.dtsi @@ -120,6 +120,10 @@ <0 119 IRQ_TYPE_LEVEL_HIGH>; }; +&gpc { + compatible = "fsl,imx6qp-gpc", "fsl,imx6q-gpc"; +}; + &ipu1 { compatible = "fsl,imx6qp-ipu", "fsl,imx6q-ipu"; fsl,prg = <&prg1>; -- cgit v1.2.3 From b8a559feffb2210344bb11cedc1103311ac41de5 Mon Sep 17 00:00:00 2001 From: Tim Harvey Date: Tue, 2 May 2017 10:39:37 -0700 Subject: ARM: dts: imx: add Gateworks Ventana GW5600 support The Gateworks Ventana GW5600 is a media-centric single-board computer based on the NXP IMX6 SoC with the following features: * PoE (emulated 802.3af) * IMX6 DualLite Soc (supports IMX6S,IMX6DL,IMX6Q) * 1GiB DDR3 DRAM (supports up to 4GiB) * 8GB eMMC * 1x microSD connector * Gateworks System Controller: - hardware watchdog - hardware monitor - pushbutton controller - EEPROM storage - power control * 1x bi-color USER LED * 1x front-panel pushbutton * 1x front-panel GbE * 2x front panel USB 2.0 * 1x front panel USB OTG * 1x SIM socket * 1x miniPCIe socket with SATA (mSATA) * 1x miniPCIe socket with USB 2.0 (Modem) * 1x miniPCIe socket with PCIe, USB 2.0, and SIM * RS232/RS485 serial - 2x RS232 UARTs (off-board connector) - 1x RS485 (loading option) * 4x digital I/O signals (PWM/I2C/GPIO/5V/3.3V options) * 1x analog input (0 to 5V) * 1x CAN (loading option) * off-board LVDS: - I2C - 12V - LED driver (4x 330mA strings) - matrix keypad controller (8row x 10col) - I2S - dual-channel LVDS - PWM * off-board video input: - 16bit parallel / MIPI (IPU1_CSI0) * GPS (loading option) * Analog Video Input (CVBS) 3 inputs (1 active at a time) * Analog Audio Input/Output (2ch Line level, optional MIC/HP drivers) * HDMI out * JTAG programmable * Inertial Module Signed-off-by: Tim Harvey Signed-off-by: Shawn Guo --- arch/arm/boot/dts/Makefile | 2 + arch/arm/boot/dts/imx6dl-gw560x.dts | 55 +++ arch/arm/boot/dts/imx6q-gw560x.dts | 59 +++ arch/arm/boot/dts/imx6qdl-gw560x.dtsi | 749 ++++++++++++++++++++++++++++++++++ 4 files changed, 865 insertions(+) create mode 100644 arch/arm/boot/dts/imx6dl-gw560x.dts create mode 100644 arch/arm/boot/dts/imx6q-gw560x.dts create mode 100644 arch/arm/boot/dts/imx6qdl-gw560x.dtsi (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 9c5e1d944d1c..7881aaef2d58 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -363,6 +363,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6dl-gw551x.dtb \ imx6dl-gw552x.dtb \ imx6dl-gw553x.dtb \ + imx6dl-gw560x.dtb \ imx6dl-gw5903.dtb \ imx6dl-gw5904.dtb \ imx6dl-hummingboard.dtb \ @@ -408,6 +409,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6q-gw551x.dtb \ imx6q-gw552x.dtb \ imx6q-gw553x.dtb \ + imx6q-gw560x.dtb \ imx6q-gw5903.dtb \ imx6q-gw5904.dtb \ imx6q-h100.dtb \ diff --git a/arch/arm/boot/dts/imx6dl-gw560x.dts b/arch/arm/boot/dts/imx6dl-gw560x.dts new file mode 100644 index 000000000000..21bdfaf8df53 --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-gw560x.dts @@ -0,0 +1,55 @@ +/* + * Copyright 2017 Gateworks Corporation + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this file; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "imx6dl.dtsi" +#include "imx6qdl-gw560x.dtsi" + +/ { + model = "Gateworks Ventana i.MX6 DualLite/Solo GW560X"; + compatible = "gw,imx6dl-gw560x", "gw,ventana", "fsl,imx6dl"; +}; diff --git a/arch/arm/boot/dts/imx6q-gw560x.dts b/arch/arm/boot/dts/imx6q-gw560x.dts new file mode 100644 index 000000000000..735f2bbf1439 --- /dev/null +++ b/arch/arm/boot/dts/imx6q-gw560x.dts @@ -0,0 +1,59 @@ +/* + * Copyright 2017 Gateworks Corporation + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this file; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "imx6q.dtsi" +#include "imx6qdl-gw560x.dtsi" + +/ { + model = "Gateworks Ventana i.MX6 Dual/Quad GW560X"; + compatible = "gw,imx6q-gw560x", "gw,ventana", "fsl,imx6q"; +}; + +&sata { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6qdl-gw560x.dtsi b/arch/arm/boot/dts/imx6qdl-gw560x.dtsi new file mode 100644 index 000000000000..d894dde6e85d --- /dev/null +++ b/arch/arm/boot/dts/imx6qdl-gw560x.dtsi @@ -0,0 +1,749 @@ +/* + * Copyright 2017 Gateworks Corporation + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this file; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include +#include + +/ { + /* these are used by bootloader for disabling nodes */ + aliases { + led0 = &led0; + led1 = &led1; + led2 = &led2; + ssi0 = &ssi1; + usb0 = &usbh1; + usb1 = &usbotg; + }; + + chosen { + stdout-path = &uart2; + }; + + backlight-display { + compatible = "pwm-backlight"; + pwms = <&pwm4 0 5000000>; + brightness-levels = < + 0 1 2 3 4 5 6 7 8 9 + 10 11 12 13 14 15 16 17 18 19 + 20 21 22 23 24 25 26 27 28 29 + 30 31 32 33 34 35 36 37 38 39 + 40 41 42 43 44 45 46 47 48 49 + 50 51 52 53 54 55 56 57 58 59 + 60 61 62 63 64 65 66 67 68 69 + 70 71 72 73 74 75 76 77 78 79 + 80 81 82 83 84 85 86 87 88 89 + 90 91 92 93 94 95 96 97 98 99 + 100 + >; + default-brightness-level = <100>; + }; + + backlight-keypad { + compatible = "gpio-backlight"; + gpios = <&gpio4 30 GPIO_ACTIVE_HIGH>; + default-on; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_leds>; + + led0: user1 { + label = "user1"; + gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */ + default-state = "on"; + linux,default-trigger = "heartbeat"; + }; + + led1: user2 { + label = "user2"; + gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */ + default-state = "off"; + }; + + led2: user3 { + label = "user3"; + gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */ + default-state = "off"; + }; + }; + + memory@10000000 { + reg = <0x10000000 0x40000000>; + }; + + pps { + compatible = "pps-gpio"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pps>; + gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>; + }; + + reg_2p5v: regulator-2p5v { + compatible = "regulator-fixed"; + regulator-name = "2P5V"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-always-on; + }; + + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_5p0v: regulator-5p0v { + compatible = "regulator-fixed"; + regulator-name = "5P0V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + + reg_12p0v: regulator-12p0v { + compatible = "regulator-fixed"; + regulator-name = "12P0V"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + gpio = <&gpio4 25 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_1p4v: regulator-vddsoc { + compatible = "regulator-fixed"; + regulator-name = "vdd_soc"; + regulator-min-microvolt = <1400000>; + regulator-max-microvolt = <1400000>; + regulator-always-on; + }; + + reg_usb_h1_vbus: regulator-usb-h1-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb_h1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + + reg_usb_otg_vbus: regulator-usb-otg-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb_otg_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + sound { + compatible = "fsl,imx6q-ventana-sgtl5000", + "fsl,imx-audio-sgtl5000"; + model = "sgtl5000-audio"; + ssi-controller = <&ssi1>; + audio-codec = <&sgtl5000>; + audio-routing = + "MIC_IN", "Mic Jack", + "Mic Jack", "Mic Bias", + "Headphone Jack", "HP_OUT"; + mux-int-port = <1>; + mux-ext-port = <4>; + }; +}; + +&audmux { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_audmux>; + status = "okay"; +}; + +&ecspi3 { + cs-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi3>; + status = "okay"; +}; + +&can1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan>; + status = "okay"; +}; + +&clks { + assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>, + <&clks IMX6QDL_CLK_LDB_DI1_SEL>; + assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>, + <&clks IMX6QDL_CLK_PLL3_USB_OTG>; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet>; + phy-mode = "rgmii-id"; + phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&hdmi { + ddc-i2c-bus = <&i2c3>; + status = "okay"; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + eeprom1: eeprom@50 { + compatible = "atmel,24c02"; + reg = <0x50>; + pagesize = <16>; + }; + + eeprom2: eeprom@51 { + compatible = "atmel,24c02"; + reg = <0x51>; + pagesize = <16>; + }; + + eeprom3: eeprom@52 { + compatible = "atmel,24c02"; + reg = <0x52>; + pagesize = <16>; + }; + + eeprom4: eeprom@53 { + compatible = "atmel,24c02"; + reg = <0x53>; + pagesize = <16>; + }; + + pca9555: gpio@23 { + compatible = "nxp,pca9555"; + reg = <0x23>; + gpio-controller; + #gpio-cells = <2>; + }; + + ds1672: rtc@68 { + compatible = "dallas,ds1672"; + reg = <0x68>; + }; +}; + +&i2c2 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; + + sgtl5000: codec@a { + compatible = "fsl,sgtl5000"; + reg = <0x0a>; + clocks = <&clks IMX6QDL_CLK_CKO>; + VDDA-supply = <®_1p8v>; + VDDIO-supply = <®_3p3v>; + }; + + tca8418: keypad@34 { + compatible = "ti,tca8418"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_keypad>; + reg = <0x34>; + interrupt-parent = <&gpio5>; + interrupts = <11 IRQ_TYPE_EDGE_FALLING>; + linux,keymap = < MATRIX_KEY(0x00, 0x01, BTN_0) + MATRIX_KEY(0x00, 0x00, BTN_1) + MATRIX_KEY(0x01, 0x01, BTN_2) + MATRIX_KEY(0x01, 0x00, BTN_3) + MATRIX_KEY(0x02, 0x00, BTN_4) + MATRIX_KEY(0x00, 0x03, BTN_5) + MATRIX_KEY(0x00, 0x02, BTN_6) + MATRIX_KEY(0x01, 0x03, BTN_7) + MATRIX_KEY(0x01, 0x02, BTN_8) + MATRIX_KEY(0x02, 0x02, BTN_9) + >; + keypad,num-rows = <4>; + keypad,num-columns = <4>; + }; + + ltc3676: pmic@3c { + compatible = "lltc,ltc3676"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pmic>; + reg = <0x3c>; + interrupt-parent = <&gpio1>; + interrupts = <8 IRQ_TYPE_EDGE_FALLING>; + + regulators { + /* VDD_DDR (1+R1/R2 = 2.105) */ + reg_vdd_ddr: sw2 { + regulator-name = "vddddr"; + regulator-min-microvolt = <868310>; + regulator-max-microvolt = <1684000>; + lltc,fb-voltage-divider = <221000 200000>; + regulator-ramp-delay = <7000>; + regulator-boot-on; + regulator-always-on; + }; + + /* VDD_ARM (1+R1/R2 = 1.931) */ + reg_vdd_arm: sw3 { + regulator-name = "vddarm"; + regulator-min-microvolt = <796551>; + regulator-max-microvolt = <1544827>; + lltc,fb-voltage-divider = <243000 261000>; + regulator-ramp-delay = <7000>; + regulator-boot-on; + regulator-always-on; + linux,phandle = <®_vdd_arm>; + }; + + /* VDD_1P8 (1+R1/R2 = 2.505): GPS/VideoIn/ENET-PHY */ + reg_1p8v: sw4 { + regulator-name = "vdd1p8"; + regulator-min-microvolt = <1033310>; + regulator-max-microvolt = <2004000>; + lltc,fb-voltage-divider = <301000 200000>; + regulator-ramp-delay = <7000>; + regulator-boot-on; + regulator-always-on; + }; + + /* VDD_1P0 (1+R1/R2 = 1.39): PCIe/ENET-PHY */ + reg_1p0v: ldo2 { + regulator-name = "vdd1p0"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1050000>; + lltc,fb-voltage-divider = <78700 200000>; + regulator-boot-on; + regulator-always-on; + }; + + /* VDD_AUD_1P8: Audio codec */ + reg_aud_1p8v: ldo3 { + regulator-name = "vdd1p8a"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + }; + + /* VDD_HIGH (1+R1/R2 = 4.17) */ + reg_3p0v: ldo4 { + regulator-name = "vdd3p0"; + regulator-min-microvolt = <3023250>; + regulator-max-microvolt = <3023250>; + lltc,fb-voltage-divider = <634000 200000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; +}; + +&i2c3 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; + + egalax_ts: touchscreen@4 { + compatible = "eeti,egalax_ts"; + reg = <0x04>; + interrupt-parent = <&gpio5>; + interrupts = <12 IRQ_TYPE_EDGE_FALLING>; + wakeup-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>; + }; +}; + +&ldb { + fsl,dual-channel; + status = "okay"; + + lvds-channel@0 { + fsl,data-mapping = "spwg"; + fsl,data-width = <18>; + status = "okay"; + + display-timings { + native-mode = <&timing0>; + timing0: hsd100pxn1 { + clock-frequency = <65000000>; + hactive = <1024>; + vactive = <768>; + hback-porch = <220>; + hfront-porch = <40>; + vback-porch = <21>; + vfront-porch = <7>; + hsync-len = <60>; + vsync-len = <10>; + }; + }; + }; +}; + +&pcie { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie>; + reset-gpio = <&gpio4 31 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&pwm2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */ + status = "disabled"; +}; + +&pwm3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */ + status = "disabled"; +}; + +&pwm4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm4>; + status = "okay"; +}; + +&ssi1 { + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + uart-has-rtscts; + rts-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +&uart5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart5>; + status = "okay"; +}; + +&usbotg { + vbus-supply = <®_usb_otg_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg>; + disable-over-current; + status = "okay"; +}; + +&usbh1 { + vbus-supply = <®_usb_h1_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbh1>; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + bus-width = <8>; + vmmc-supply = <®_3p3v>; + non-removable; + status = "okay"; +}; + +&usdhc3 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc3>; + pinctrl-1 = <&pinctrl_usdhc3_100mhz>; + pinctrl-2 = <&pinctrl_usdhc3_200mhz>; + cd-gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>; + vmmc-supply = <®_3p3v>; + status = "okay"; +}; + +&wdog1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog>; + fsl,ext-reset-output; +}; + +&iomuxc { + pinctrl_audmux: audmuxgrp { + fsl,pins = < + /* AUD4 */ + MX6QDL_PAD_DISP0_DAT20__AUD4_TXC 0x130b0 + MX6QDL_PAD_DISP0_DAT21__AUD4_TXD 0x110b0 + MX6QDL_PAD_DISP0_DAT22__AUD4_TXFS 0x130b0 + MX6QDL_PAD_DISP0_DAT23__AUD4_RXD 0x130b0 + MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0 /* AUD4_MCK */ + /* AUD6 */ + MX6QDL_PAD_DI0_PIN2__AUD6_TXD 0x130b0 + MX6QDL_PAD_DI0_PIN3__AUD6_TXFS 0x130b0 + MX6QDL_PAD_DI0_PIN4__AUD6_RXD 0x130b0 + MX6QDL_PAD_DI0_PIN15__AUD6_TXC 0x130b0 + >; + }; + + pinctrl_ecspi3: escpi3grp { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK 0x100b1 + MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI 0x100b1 + MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO 0x100b1 + MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24 0x100b1 + >; + }; + + pinctrl_enet: enetgrp { + fsl,pins = < + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030 + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030 + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030 + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030 + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030 + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030 + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030 + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030 + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030 + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030 + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030 + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030 + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 + MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 + MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x4001b0b0 /* PHY_RST# */ + >; + }; + + pinctrl_flexcan: flexcangrp { + fsl,pins = < + MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b0b1 + MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x1b0b1 + MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x4001b0b0 /* CAN_STBY */ + >; + }; + + pinctrl_gpio_leds: gpioledsgrp { + fsl,pins = < + MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x1b0b0 + MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x1b0b0 + MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x1b0b0 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 + MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1 + MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 + MX6QDL_PAD_GPIO_19__GPIO4_IO05 0x4001b0b0 /* DIOI2C_DIS# */ + MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12 0x0001b0b0 /* LVDS_TOUCH_IRQ# */ + MX6QDL_PAD_DISP0_DAT19__GPIO5_IO13 0x0001b0b0 /* LVDS_BACKEN */ + >; + }; + + pinctrl_keypad: keypadgrp { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT17__GPIO5_IO11 0x0001b0b0 /* KEYPAD_IRQ# */ + MX6QDL_PAD_DISP0_DAT9__GPIO4_IO30 0x0001b0b0 /* KEYPAD_LED_EN */ + >; + }; + + pinctrl_pcie: pciegrp { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT10__GPIO4_IO31 0x1b0b0 /* PCI_RST# */ + MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x4001b0b0 /* PCIESKT_WDIS# */ + >; + }; + + pinctrl_pmic: pmicgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x0001b0b0 /* PMIC_IRQ# */ + >; + }; + + pinctrl_pps: ppsgrp { + fsl,pins = < + MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x1b0b1 + >; + }; + + pinctrl_pwm2: pwm2grp { + fsl,pins = < + MX6QDL_PAD_SD1_DAT2__PWM2_OUT 0x1b0b1 + >; + }; + + pinctrl_pwm3: pwm3grp { + fsl,pins = < + MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x1b0b1 + >; + }; + + pinctrl_pwm4: pwm4grp { + fsl,pins = < + MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1 + MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1 + MX6QDL_PAD_SD3_DAT4__GPIO7_IO01 0x4001b0b1 /* TEN */ + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1 + MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_uart5: uart5grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1 + MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_usbh1: usbh1grp { + fsl,pins = < + MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x4001b0b0 /* USBHUB_RST# */ + >; + }; + + pinctrl_usbotg: usbotggrp { + fsl,pins = < + MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 + MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0 /* PWR_EN */ + MX6QDL_PAD_KEY_COL4__GPIO4_IO14 0x1b0b0 /* OC */ + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6QDL_PAD_SD2_CMD__SD2_CMD 0x170f9 + MX6QDL_PAD_SD2_CLK__SD2_CLK 0x100f9 + MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x170f9 + MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x170f9 + MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x170f9 + MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x170f9 + MX6QDL_PAD_NANDF_D4__SD2_DATA4 0x170f9 + MX6QDL_PAD_NANDF_D5__SD2_DATA5 0x170f9 + MX6QDL_PAD_NANDF_D6__SD2_DATA6 0x170f9 + MX6QDL_PAD_NANDF_D7__SD2_DATA7 0x170f9 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 + MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x17059 /* CD */ + MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x17059 + >; + }; + + pinctrl_usdhc3_100mhz: usdhc3grp100mhz { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170b9 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100b9 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170b9 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170b9 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170b9 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170b9 + MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x170b9 /* CD */ + MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x170b9 + >; + }; + + pinctrl_usdhc3_200mhz: usdhc3grp200mhz { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170f9 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100f9 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170f9 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170f9 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170f9 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170f9 + MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x170f9 /* CD */ + MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x170f9 + >; + }; + + pinctrl_wdog: wdoggrp { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT8__WDOG1_B 0x1b0b0 + >; + }; +}; -- cgit v1.2.3 From 2b7349345ede5a8c221a7ca2d6731588241d8425 Mon Sep 17 00:00:00 2001 From: Alexandre Belloni Date: Wed, 19 Apr 2017 22:22:02 +0200 Subject: ARM: dts: imx6qdl-nitrogen6_max: fix rv4162 compatible The rv4162 vendor is microcrystal, not ST. Signed-off-by: Alexandre Belloni Acked-by: Gary Bisson Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi index bad3c9f9eeac..b63134e3b51a 100644 --- a/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi +++ b/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi @@ -408,7 +408,7 @@ }; rtc: rtc@68 { - compatible = "st,rv4162"; + compatible = "microcrystal,rv4162"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_rv4162>; reg = <0x68>; -- cgit v1.2.3 From 16e54a1452eddfb2af28546e9bf2f8bffb8eabdd Mon Sep 17 00:00:00 2001 From: Alexandre Belloni Date: Wed, 19 Apr 2017 22:22:03 +0200 Subject: ARM: dts: imx6qdl-nitrogen6_som2: fix rv4162 compatible The rv4162 vendor is microcrystal, not ST. Signed-off-by: Alexandre Belloni Acked-by: Gary Bisson Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi index 559da17297ef..aeaa5a6e4fcf 100644 --- a/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi +++ b/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi @@ -326,7 +326,7 @@ }; rtc@68 { - compatible = "st,rv4162"; + compatible = "microcrystal,rv4162"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_rv4162>; reg = <0x68>; -- cgit v1.2.3 From dcf79dc58b368d29bccc087852846eb1117eac7a Mon Sep 17 00:00:00 2001 From: Alexandre Belloni Date: Wed, 19 Apr 2017 22:22:04 +0200 Subject: ARM: dts: imx7d-nitrogen7: fix rv4162 compatible The rv4162 compatbile string is missing the vendor part, add it. Signed-off-by: Alexandre Belloni Acked-by: Gary Bisson Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx7d-nitrogen7.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/imx7d-nitrogen7.dts b/arch/arm/boot/dts/imx7d-nitrogen7.dts index 5d98e2b5d54b..a44f992051ac 100644 --- a/arch/arm/boot/dts/imx7d-nitrogen7.dts +++ b/arch/arm/boot/dts/imx7d-nitrogen7.dts @@ -279,7 +279,7 @@ status = "okay"; rtc@68 { - compatible = "rv4162"; + compatible = "microcrystal,rv4162"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c2_rv4162>; reg = <0x68>; -- cgit v1.2.3 From e711b857aab01c2cfa563aadc6a4c669169c1c4c Mon Sep 17 00:00:00 2001 From: Stefan Agner Date: Mon, 10 Apr 2017 14:00:15 -0700 Subject: ARM: dts: imx7: add USDHC NAND and IPG clock to SDHC instances The USDHC instances need the USDHC NAND and IPG clock in order to operate. Reference them properly by replacing the dummy clocks with the actual clocks. Note that both clocks are currently implicitly enabled since they are part of the i.MX 7 clock drivers init_on list. This might change in the future. Signed-off-by: Stefan Agner Acked-by: Dong Aisheng Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx7s.dtsi | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/imx7s.dtsi b/arch/arm/boot/dts/imx7s.dtsi index c4f12fd2e044..843eb379e1ea 100644 --- a/arch/arm/boot/dts/imx7s.dtsi +++ b/arch/arm/boot/dts/imx7s.dtsi @@ -934,8 +934,8 @@ compatible = "fsl,imx7d-usdhc", "fsl,imx6sl-usdhc"; reg = <0x30b40000 0x10000>; interrupts = ; - clocks = <&clks IMX7D_CLK_DUMMY>, - <&clks IMX7D_CLK_DUMMY>, + clocks = <&clks IMX7D_IPG_ROOT_CLK>, + <&clks IMX7D_NAND_USDHC_BUS_ROOT_CLK>, <&clks IMX7D_USDHC1_ROOT_CLK>; clock-names = "ipg", "ahb", "per"; bus-width = <4>; @@ -946,8 +946,8 @@ compatible = "fsl,imx7d-usdhc", "fsl,imx6sl-usdhc"; reg = <0x30b50000 0x10000>; interrupts = ; - clocks = <&clks IMX7D_CLK_DUMMY>, - <&clks IMX7D_CLK_DUMMY>, + clocks = <&clks IMX7D_IPG_ROOT_CLK>, + <&clks IMX7D_NAND_USDHC_BUS_ROOT_CLK>, <&clks IMX7D_USDHC2_ROOT_CLK>; clock-names = "ipg", "ahb", "per"; bus-width = <4>; @@ -958,8 +958,8 @@ compatible = "fsl,imx7d-usdhc", "fsl,imx6sl-usdhc"; reg = <0x30b60000 0x10000>; interrupts = ; - clocks = <&clks IMX7D_CLK_DUMMY>, - <&clks IMX7D_CLK_DUMMY>, + clocks = <&clks IMX7D_IPG_ROOT_CLK>, + <&clks IMX7D_NAND_USDHC_BUS_ROOT_CLK>, <&clks IMX7D_USDHC3_ROOT_CLK>; clock-names = "ipg", "ahb", "per"; bus-width = <4>; -- cgit v1.2.3 From 6559b3915592b32fc43f78ef7ae04f614595a6cf Mon Sep 17 00:00:00 2001 From: Simon Horman Date: Wed, 26 Apr 2017 12:05:30 +0200 Subject: ARM: dts: emev2: update PFC node name to pin-controller The device trees for Renesas SoCs use either pfc or pin-controller as the node name for the PFC device. This patch is intended to take a step towards unifying the node name used as pin-controller which appears to be the more generic of the two and thus more in keeping with the DT specs. My analysis is that this is a user-visible change to the extent that kernel logs, and sysfs entries change from e0140200.pfc and pfc@e0140200 to e0140200.pin-controller and pin-controller@e0140200. Signed-off-by: Simon Horman Reviewed-by: Geert Uytterhoeven --- arch/arm/boot/dts/emev2.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/emev2.dtsi b/arch/arm/boot/dts/emev2.dtsi index 0124faf175c8..42ea246e71cb 100644 --- a/arch/arm/boot/dts/emev2.dtsi +++ b/arch/arm/boot/dts/emev2.dtsi @@ -197,7 +197,7 @@ clock-names = "sclk"; }; - pfc: pfc@e0140200 { + pfc: pin-controller@e0140200 { compatible = "renesas,pfc-emev2"; reg = <0xe0140200 0x100>; }; -- cgit v1.2.3 From 5b9906c9ee3b7117273467e3e74ecbd8f93ea730 Mon Sep 17 00:00:00 2001 From: Simon Horman Date: Wed, 26 Apr 2017 12:05:31 +0200 Subject: ARM: dts: r8a73a4: update PFC node name to pin-controller The device trees for Renesas SoCs use either pfc or pin-controller as the node name for the PFC device. This patch is intended to take a step towards unifying the node name used as pin-controller which appears to be the more generic of the two and thus more in keeping with the DT specs. My analysis is that this is a user-visible change to the extent that kernel logs, and sysfs entries change from e6050000.pfc and pfc@e6050000 to e6050000.pin-controller and pin-controller@e6050000. Signed-off-by: Simon Horman Reviewed-by: Geert Uytterhoeven --- arch/arm/boot/dts/r8a73a4.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/r8a73a4.dtsi b/arch/arm/boot/dts/r8a73a4.dtsi index 1f5c9f6dddba..310222634570 100644 --- a/arch/arm/boot/dts/r8a73a4.dtsi +++ b/arch/arm/boot/dts/r8a73a4.dtsi @@ -219,7 +219,7 @@ power-domains = <&pd_c4>; }; - pfc: pfc@e6050000 { + pfc: pin-controller@e6050000 { compatible = "renesas,pfc-r8a73a4"; reg = <0 0xe6050000 0 0x9000>; gpio-controller; -- cgit v1.2.3 From 9d65683f6e228df6b3b0e6b74de4729a782b1e65 Mon Sep 17 00:00:00 2001 From: Simon Horman Date: Wed, 26 Apr 2017 12:05:32 +0200 Subject: ARM: dts: r8a7740: update PFC node name to pin-controller The device trees for Renesas SoCs use either pfc or pin-controller as the node name for the PFC device. This patch is intended to take a step towards unifying the node name used as pin-controller which appears to be the more generic of the two and thus more in keeping with the DT specs. My analysis is that this is a user-visible change to the extent that kernel logs, and sysfs entries change from e6050000.pfc and pfc@e6050000 to e6050000.pin-controller and pin-controller@e6050000. Signed-off-by: Simon Horman Reviewed-by: Geert Uytterhoeven --- arch/arm/boot/dts/r8a7740.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/r8a7740.dtsi b/arch/arm/boot/dts/r8a7740.dtsi index 34159a8349de..d37d22682a63 100644 --- a/arch/arm/boot/dts/r8a7740.dtsi +++ b/arch/arm/boot/dts/r8a7740.dtsi @@ -299,7 +299,7 @@ status = "disabled"; }; - pfc: pfc@e6050000 { + pfc: pin-controller@e6050000 { compatible = "renesas,pfc-r8a7740"; reg = <0xe6050000 0x8000>, <0xe605800c 0x20>; -- cgit v1.2.3 From b3ed04985ce6d19a0cb12dccf95d41c1b86693cc Mon Sep 17 00:00:00 2001 From: Simon Horman Date: Wed, 26 Apr 2017 12:05:33 +0200 Subject: ARM: dts: r8a7778: update PFC node name to pin-controller The device trees for Renesas SoCs use either pfc or pin-controller as the node name for the PFC device. This patch is intended to take a step towards unifying the node name used as pin-controller which appears to be the more generic of the two and thus more in keeping with the DT specs. My analysis is that this is a user-visible change to the extent that kernel logs, and sysfs entries change from fffc0000.pfc and pfc@fffc0000 to fffc0000.pin-controller and pin-controller@fffc0000. Signed-off-by: Simon Horman Reviewed-by: Geert Uytterhoeven --- arch/arm/boot/dts/r8a7778.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/r8a7778.dtsi b/arch/arm/boot/dts/r8a7778.dtsi index 1e93c94a9eac..8f3156c0e575 100644 --- a/arch/arm/boot/dts/r8a7778.dtsi +++ b/arch/arm/boot/dts/r8a7778.dtsi @@ -142,7 +142,7 @@ interrupt-controller; }; - pfc: pfc@fffc0000 { + pfc: pin-controller@fffc0000 { compatible = "renesas,pfc-r8a7778"; reg = <0xfffc0000 0x118>; }; -- cgit v1.2.3 From b07b763c5255cf400ddfd4b6a7899adf0538dea9 Mon Sep 17 00:00:00 2001 From: Simon Horman Date: Wed, 26 Apr 2017 12:05:34 +0200 Subject: ARM: dts: r8a7779: update PFC node name to pin-controller The device trees for Renesas SoCs use either pfc or pin-controller as the node name for the PFC device. This patch is intended to take a step towards unifying the node name used as pin-controller which appears to be the more generic of the two and thus more in keeping with the DT specs. My analysis is that this is a user-visible change to the extent that kernel logs, and sysfs entries change from fffc0000.pfc and pfc@fffc0000 to fffc0000.pin-controller and pin-controller@fffc0000. Signed-off-by: Simon Horman Reviewed-by: Geert Uytterhoeven --- arch/arm/boot/dts/r8a7779.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/r8a7779.dtsi b/arch/arm/boot/dts/r8a7779.dtsi index ae2d9a9c65af..8ee0b2ca5d39 100644 --- a/arch/arm/boot/dts/r8a7779.dtsi +++ b/arch/arm/boot/dts/r8a7779.dtsi @@ -286,7 +286,7 @@ status = "disabled"; }; - pfc: pfc@fffc0000 { + pfc: pin-controller@fffc0000 { compatible = "renesas,pfc-r8a7779"; reg = <0xfffc0000 0x23c>; }; -- cgit v1.2.3 From a5f4ae3c3165134599ad850f8d34c6a35d6c0f97 Mon Sep 17 00:00:00 2001 From: Simon Horman Date: Wed, 26 Apr 2017 12:05:35 +0200 Subject: ARM: dts: r8a7790: update PFC node name to pin-controller The device trees for Renesas SoCs use either pfc or pin-controller as the node name for the PFC device. This patch is intended to take a step towards unifying the node name used as pin-controller which appears to be the more generic of the two and thus more in keeping with the DT specs. My analysis is that this is a user-visible change to the extent that kernel logs, and sysfs entries change from e6060000.pfc and pfc@e6060000 to e6060000.pin-controller and pin-controller@e6060000. Signed-off-by: Simon Horman Reviewed-by: Geert Uytterhoeven --- arch/arm/boot/dts/r8a7790.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi index 99269aaca6fc..416956a42c93 100644 --- a/arch/arm/boot/dts/r8a7790.dtsi +++ b/arch/arm/boot/dts/r8a7790.dtsi @@ -614,7 +614,7 @@ max-frequency = <97500000>; }; - pfc: pfc@e6060000 { + pfc: pin-controller@e6060000 { compatible = "renesas,pfc-r8a7790"; reg = <0 0xe6060000 0 0x250>; }; -- cgit v1.2.3 From 12cc7145d4dbb7849468fa3c834de4f66e60323a Mon Sep 17 00:00:00 2001 From: Simon Horman Date: Wed, 26 Apr 2017 12:05:36 +0200 Subject: ARM: dts: r8a7791: update PFC node name to pin-controller The device trees for Renesas SoCs use either pfc or pin-controller as the node name for the PFC device. This patch is intended to take a step towards unifying the node name used as pin-controller which appears to be the more generic of the two and thus more in keeping with the DT specs. My analysis is that this is a user-visible change to the extent that kernel logs, and sysfs entries change from e6060000.pfc and pfc@e6060000 to e6060000.pin-controller and pin-controller@e6060000. Signed-off-by: Simon Horman Reviewed-by: Geert Uytterhoeven --- arch/arm/boot/dts/r8a7791.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi index 4d0c2ce59900..540c5b27b842 100644 --- a/arch/arm/boot/dts/r8a7791.dtsi +++ b/arch/arm/boot/dts/r8a7791.dtsi @@ -562,7 +562,7 @@ status = "disabled"; }; - pfc: pfc@e6060000 { + pfc: pin-controller@e6060000 { compatible = "renesas,pfc-r8a7791"; reg = <0 0xe6060000 0 0x250>; }; -- cgit v1.2.3 From 5506dc4a8ebc2258e01a536b025bad17b6828da8 Mon Sep 17 00:00:00 2001 From: Simon Horman Date: Wed, 26 Apr 2017 12:05:37 +0200 Subject: ARM: dts: r8a7793: update PFC node name to pin-controller The device trees for Renesas SoCs use either pfc or pin-controller as the node name for the PFC device. This patch is intended to take a step towards unifying the node name used as pin-controller which appears to be the more generic of the two and thus more in keeping with the DT specs. My analysis is that this is a user-visible change to the extent that kernel logs, and sysfs entries change from e6060000.pfc and pfc@e6060000 to e6060000.pin-controller and pin-controller@e6060000. Signed-off-by: Simon Horman Reviewed-by: Geert Uytterhoeven --- arch/arm/boot/dts/r8a7793.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/r8a7793.dtsi b/arch/arm/boot/dts/r8a7793.dtsi index 4de6041d61f9..728b5bca5bdb 100644 --- a/arch/arm/boot/dts/r8a7793.dtsi +++ b/arch/arm/boot/dts/r8a7793.dtsi @@ -529,7 +529,7 @@ status = "disabled"; }; - pfc: pfc@e6060000 { + pfc: pin-controller@e6060000 { compatible = "renesas,pfc-r8a7793"; reg = <0 0xe6060000 0 0x250>; }; -- cgit v1.2.3 From c6a4b9442dec038e7f6d276ef91713a663921f09 Mon Sep 17 00:00:00 2001 From: Simon Horman Date: Wed, 26 Apr 2017 12:05:38 +0200 Subject: ARM: dts: sh73a0: update PFC node name to pin-controller The device trees for Renesas SoCs use either pfc or pin-controller as the node name for the PFC device. This patch is intended to take a step towards unifying the node name used as pin-controller which appears to be the more generic of the two and thus more in keeping with the DT specs. My analysis is that this is a user-visible change to the extent that kernel logs, and sysfs entries change from e6050000.pfc and pfc@e6050000 to e6050000.pin-controller and pin-controller@e6050000. Signed-off-by: Simon Horman Reviewed-by: Geert Uytterhoeven --- arch/arm/boot/dts/sh73a0.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/sh73a0.dtsi b/arch/arm/boot/dts/sh73a0.dtsi index 6b01ab354e88..4ea5c5a16c57 100644 --- a/arch/arm/boot/dts/sh73a0.dtsi +++ b/arch/arm/boot/dts/sh73a0.dtsi @@ -444,7 +444,7 @@ status = "disabled"; }; - pfc: pfc@e6050000 { + pfc: pin-controller@e6050000 { compatible = "renesas,pfc-sh73a0"; reg = <0xe6050000 0x8000>, <0xe605801c 0x1c>; -- cgit v1.2.3 From 9907a4a00f6df0796d6e838c9dbf3ecce2ec4600 Mon Sep 17 00:00:00 2001 From: Chris Brandt Date: Fri, 28 Apr 2017 12:01:34 -0700 Subject: ARM: dts: r7s72100: add usb clocks to device tree This adds the USB0 and USB1 clocks to the device tree. Signed-off-by: Chris Brandt Reviewed-by: Geert Uytterhoeven Signed-off-by: Simon Horman --- arch/arm/boot/dts/r7s72100.dtsi | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/r7s72100.dtsi b/arch/arm/boot/dts/r7s72100.dtsi index 0423996e4dcc..5cf53e9943af 100644 --- a/arch/arm/boot/dts/r7s72100.dtsi +++ b/arch/arm/boot/dts/r7s72100.dtsi @@ -144,9 +144,9 @@ #clock-cells = <1>; compatible = "renesas,r7s72100-mstp-clocks", "renesas,cpg-mstp-clocks"; reg = <0xfcfe0430 4>; - clocks = <&b_clk>; - clock-indices = ; - clock-output-names = "ether"; + clocks = <&b_clk>, <&p1_clk>, <&p1_clk>; + clock-indices = ; + clock-output-names = "ether", "usb0", "usb1"; }; mstp8_clks: mstp8_clks@fcfe0434 { -- cgit v1.2.3 From e15ebbfa1febf16f1af42fcc6ffa7e267eb330ae Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Mon, 24 Apr 2017 17:26:32 +0200 Subject: ARM: dts: r8a7791: Add GyroADC clock and device node Add node for the GyroADC block and it's associated clock. Signed-off-by: Marek Vasut Reviewed-by: Geert Uytterhoeven Signed-off-by: Simon Horman --- arch/arm/boot/dts/r8a7791.dtsi | 14 +++++++++++++- 1 file changed, 13 insertions(+), 1 deletion(-) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi index 540c5b27b842..b730c889a404 100644 --- a/arch/arm/boot/dts/r8a7791.dtsi +++ b/arch/arm/boot/dts/r8a7791.dtsi @@ -776,6 +776,15 @@ status = "disabled"; }; + adc: adc@e6e54000 { + compatible = "renesas,r8a7791-gyroadc", "renesas,rcar-gyroadc"; + reg = <0 0xe6e54000 0 64>; + clocks = <&mstp9_clks R8A7791_CLK_GYROADC>; + clock-names = "fck"; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + status = "disabled"; + }; + scif2: serial@e6e58000 { compatible = "renesas,scif-r8a7791", "renesas,rcar-gen2-scif", "renesas,scif"; @@ -1425,13 +1434,15 @@ mstp9_clks: mstp9_clks@e6150994 { compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks"; reg = <0 0xe6150994 0 4>, <0 0xe61509a4 0 4>; - clocks = <&cp_clk>, <&cp_clk>, <&cp_clk>, <&cp_clk>, + clocks = <&p_clk>, + <&cp_clk>, <&cp_clk>, <&cp_clk>, <&cp_clk>, <&cp_clk>, <&cp_clk>, <&cp_clk>, <&cp_clk>, <&p_clk>, <&p_clk>, <&cpg_clocks R8A7791_CLK_QSPI>, <&hp_clk>, <&cp_clk>, <&hp_clk>, <&hp_clk>, <&hp_clk>, <&hp_clk>, <&hp_clk>; #clock-cells = <1>; clock-indices = < + R8A7791_CLK_GYROADC R8A7791_CLK_GPIO7 R8A7791_CLK_GPIO6 R8A7791_CLK_GPIO5 R8A7791_CLK_GPIO4 R8A7791_CLK_GPIO3 R8A7791_CLK_GPIO2 R8A7791_CLK_GPIO1 R8A7791_CLK_GPIO0 R8A7791_CLK_RCAN1 R8A7791_CLK_RCAN0 R8A7791_CLK_QSPI_MOD R8A7791_CLK_I2C5 @@ -1439,6 +1450,7 @@ R8A7791_CLK_I2C1 R8A7791_CLK_I2C0 >; clock-output-names = + "gyroadc", "gpio7", "gpio6", "gpio5", "gpio4", "gpio3", "gpio2", "gpio1", "gpio0", "rcan1", "rcan0", "qspi_mod", "i2c5", "i2c6", "i2c4", "i2c3", "i2c2", "i2c1", "i2c0"; -- cgit v1.2.3 From 5cb275a9704c135e7d9a886c86796d1df0ed52cd Mon Sep 17 00:00:00 2001 From: Simon Horman Date: Tue, 18 Apr 2017 14:55:38 +0900 Subject: ARM: dts: r8a7793: set maximum frequency for SDHI clocks Define the upper limit otherwise the driver cannot utilize max speeds. Signed-off-by: Simon Horman Acked-by: Wolfram Sang --- arch/arm/boot/dts/r8a7793.dtsi | 3 +++ 1 file changed, 3 insertions(+) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/r8a7793.dtsi b/arch/arm/boot/dts/r8a7793.dtsi index 728b5bca5bdb..13b980f27bbc 100644 --- a/arch/arm/boot/dts/r8a7793.dtsi +++ b/arch/arm/boot/dts/r8a7793.dtsi @@ -542,6 +542,7 @@ dmas = <&dmac0 0xcd>, <&dmac0 0xce>, <&dmac1 0xcd>, <&dmac1 0xce>; dma-names = "tx", "rx", "tx", "rx"; + max-frequency = <195000000>; power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; status = "disabled"; }; @@ -554,6 +555,7 @@ dmas = <&dmac0 0xc1>, <&dmac0 0xc2>, <&dmac1 0xc1>, <&dmac1 0xc2>; dma-names = "tx", "rx", "tx", "rx"; + max-frequency = <97500000>; power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; status = "disabled"; }; @@ -566,6 +568,7 @@ dmas = <&dmac0 0xd3>, <&dmac0 0xd4>, <&dmac1 0xd3>, <&dmac1 0xd4>; dma-names = "tx", "rx", "tx", "rx"; + max-frequency = <97500000>; power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; status = "disabled"; }; -- cgit v1.2.3 From 6d25a4182d797950aa757d92c30332587f4fa692 Mon Sep 17 00:00:00 2001 From: Simon Horman Date: Tue, 18 Apr 2017 14:55:39 +0900 Subject: ARM: dts: gose: Enable UHS-I SDR-50 and SDR-104 Add the "1v8" pinctrl state and sd-uhs-sdr50 property to SDHI{0,1,2}. And the sd-uhs-sdr104 property to SDHI0. Signed-off-by: Simon Horman Acked-by: Wolfram Sang --- arch/arm/boot/dts/r8a7793-gose.dts | 34 +++++++++++++++++++++++++++++++--- 1 file changed, 31 insertions(+), 3 deletions(-) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/r8a7793-gose.dts b/arch/arm/boot/dts/r8a7793-gose.dts index 806c93f6ae8b..95e51b79c1d7 100644 --- a/arch/arm/boot/dts/r8a7793-gose.dts +++ b/arch/arm/boot/dts/r8a7793-gose.dts @@ -348,16 +348,37 @@ sdhi0_pins: sd0 { groups = "sdhi0_data4", "sdhi0_ctrl"; function = "sdhi0"; + power-source = <3300>; + }; + + sdhi0_pins_uhs: sd0_uhs { + groups = "sdhi0_data4", "sdhi0_ctrl"; + function = "sdhi0"; + power-source = <1800>; }; sdhi1_pins: sd1 { groups = "sdhi1_data4", "sdhi1_ctrl"; function = "sdhi1"; + power-source = <3300>; + }; + + sdhi1_pins_uhs: sd1_uhs { + groups = "sdhi1_data4", "sdhi1_ctrl"; + function = "sdhi1"; + power-source = <1800>; }; sdhi2_pins: sd2 { groups = "sdhi2_data4", "sdhi2_ctrl"; function = "sdhi2"; + power-source = <3300>; + }; + + sdhi2_pins_uhs: sd2_uhs { + groups = "sdhi2_data4", "sdhi2_ctrl"; + function = "sdhi2"; + power-source = <1800>; }; qspi_pins: qspi { @@ -416,33 +437,40 @@ &sdhi0 { pinctrl-0 = <&sdhi0_pins>; - pinctrl-names = "default"; + pinctrl-1 = <&sdhi0_pins_uhs>; + pinctrl-names = "default", "state_uhs"; vmmc-supply = <&vcc_sdhi0>; vqmmc-supply = <&vccq_sdhi0>; cd-gpios = <&gpio6 6 GPIO_ACTIVE_LOW>; wp-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>; + sd-uhs-sdr50; + sd-uhs-sdr104; status = "okay"; }; &sdhi1 { pinctrl-0 = <&sdhi1_pins>; - pinctrl-names = "default"; + pinctrl-1 = <&sdhi1_pins_uhs>; + pinctrl-names = "default", "state_uhs"; vmmc-supply = <&vcc_sdhi1>; vqmmc-supply = <&vccq_sdhi1>; cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>; wp-gpios = <&gpio6 15 GPIO_ACTIVE_HIGH>; + sd-uhs-sdr50; status = "okay"; }; &sdhi2 { pinctrl-0 = <&sdhi2_pins>; - pinctrl-names = "default"; + pinctrl-1 = <&sdhi2_pins_uhs>; + pinctrl-names = "default", "state_uhs"; vmmc-supply = <&vcc_sdhi2>; vqmmc-supply = <&vccq_sdhi2>; cd-gpios = <&gpio6 22 GPIO_ACTIVE_LOW>; + sd-uhs-sdr50; status = "okay"; }; -- cgit v1.2.3 From fbf6ad107fafc8f5541e2bab75c40998779d5831 Mon Sep 17 00:00:00 2001 From: John Crispin Date: Wed, 26 Apr 2017 17:25:47 +0800 Subject: arm: dts: mt7623: add clock controller device nodes Add clock controller nodes for MT7623, including topckgen, infracfg, pericfg and apmixedsys. This patch also cleans up two oscillators that provide clocks for MT7623. Switch the uart clocks to the real ones while at it. Signed-off-by: John Crispin Signed-off-by: Sean Wang Signed-off-by: Matthias Brugger --- arch/arm/boot/dts/mt7623.dtsi | 64 +++++++++++++++++++++++++++++++++++++------ 1 file changed, 55 insertions(+), 9 deletions(-) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi index 402579ab70d2..b97b2babd0bb 100644 --- a/arch/arm/boot/dts/mt7623.dtsi +++ b/arch/arm/boot/dts/mt7623.dtsi @@ -14,6 +14,8 @@ #include #include +#include +#include #include "skeleton64.dtsi" / { @@ -53,16 +55,18 @@ #clock-cells = <0>; }; - rtc_clk: dummy32k { + rtc32k: oscillator@1 { compatible = "fixed-clock"; - clock-frequency = <32000>; #clock-cells = <0>; + clock-frequency = <32000>; + clock-output-names = "rtc32k"; }; - uart_clk: dummy26m { + clk26m: oscillator@0 { compatible = "fixed-clock"; - clock-frequency = <26000000>; #clock-cells = <0>; + clock-frequency = <26000000>; + clock-output-names = "clk26m"; }; timer { @@ -74,6 +78,32 @@ ; }; + topckgen: syscon@10000000 { + compatible = "mediatek,mt7623-topckgen", + "mediatek,mt2701-topckgen", + "syscon"; + reg = <0 0x10000000 0 0x1000>; + #clock-cells = <1>; + }; + + infracfg: syscon@10001000 { + compatible = "mediatek,mt7623-infracfg", + "mediatek,mt2701-infracfg", + "syscon"; + reg = <0 0x10001000 0 0x1000>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + pericfg: syscon@10003000 { + compatible = "mediatek,mt7623-pericfg", + "mediatek,mt2701-pericfg", + "syscon"; + reg = <0 0x10003000 0 0x1000>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + watchdog: watchdog@10007000 { compatible = "mediatek,mt7623-wdt", "mediatek,mt6589-wdt"; @@ -85,7 +115,7 @@ "mediatek,mt6577-timer"; reg = <0 0x10008000 0 0x80>; interrupts = ; - clocks = <&system_clk>, <&rtc_clk>; + clocks = <&system_clk>, <&rtc32k>; clock-names = "system-clk", "rtc-clk"; }; @@ -98,6 +128,14 @@ reg = <0 0x10200100 0 0x1c>; }; + apmixedsys: syscon@10209000 { + compatible = "mediatek,mt7623-apmixedsys", + "mediatek,mt2701-apmixedsys", + "syscon"; + reg = <0 0x10209000 0 0x1000>; + #clock-cells = <1>; + }; + gic: interrupt-controller@10211000 { compatible = "arm,cortex-a7-gic"; interrupt-controller; @@ -114,7 +152,9 @@ "mediatek,mt6577-uart"; reg = <0 0x11002000 0 0x400>; interrupts = ; - clocks = <&uart_clk>; + clocks = <&pericfg CLK_PERI_UART0_SEL>, + <&pericfg CLK_PERI_UART0>; + clock-names = "baud", "bus"; status = "disabled"; }; @@ -123,7 +163,9 @@ "mediatek,mt6577-uart"; reg = <0 0x11003000 0 0x400>; interrupts = ; - clocks = <&uart_clk>; + clocks = <&pericfg CLK_PERI_UART1_SEL>, + <&pericfg CLK_PERI_UART1>; + clock-names = "baud", "bus"; status = "disabled"; }; @@ -132,7 +174,9 @@ "mediatek,mt6577-uart"; reg = <0 0x11004000 0 0x400>; interrupts = ; - clocks = <&uart_clk>; + clocks = <&pericfg CLK_PERI_UART2_SEL>, + <&pericfg CLK_PERI_UART2>; + clock-names = "baud", "bus"; status = "disabled"; }; @@ -141,7 +185,9 @@ "mediatek,mt6577-uart"; reg = <0 0x11005000 0 0x400>; interrupts = ; - clocks = <&uart_clk>; + clocks = <&pericfg CLK_PERI_UART3_SEL>, + <&pericfg CLK_PERI_UART3>; + clock-names = "baud", "bus"; status = "disabled"; }; }; -- cgit v1.2.3 From 8bb656d957fa02a75d715d74f5464af7476d661f Mon Sep 17 00:00:00 2001 From: John Crispin Date: Wed, 26 Apr 2017 17:25:48 +0800 Subject: arm: dts: mt7623: add subsystem clock controller device nodes Add MT7623 subsystem clock controllers for hifsys and ethsys. Signed-off-by: John Crispin Signed-off-by: Sean Wang Signed-off-by: Matthias Brugger --- arch/arm/boot/dts/mt7623.dtsi | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi index b97b2babd0bb..54cff6ad0611 100644 --- a/arch/arm/boot/dts/mt7623.dtsi +++ b/arch/arm/boot/dts/mt7623.dtsi @@ -190,4 +190,20 @@ clock-names = "baud", "bus"; status = "disabled"; }; + + hifsys: syscon@1a000000 { + compatible = "mediatek,mt7623-hifsys", + "mediatek,mt2701-hifsys", + "syscon"; + reg = <0 0x1a000000 0 0x1000>; + #clock-cells = <1>; + }; + + ethsys: syscon@1b000000 { + compatible = "mediatek,mt7623-ethsys", + "mediatek,mt2701-ethsys", + "syscon"; + reg = <0 0x1b000000 0 0x1000>; + #clock-cells = <1>; + }; }; -- cgit v1.2.3 From 608cc0c006e0b53712c6e339e642546feb1d4a64 Mon Sep 17 00:00:00 2001 From: John Crispin Date: Wed, 26 Apr 2017 17:25:49 +0800 Subject: arm: dts: mt7623: add power domain controller device node Add power domain controller node (scpsys) for MT7623. Signed-off-by: John Crispin Signed-off-by: Sean Wang Signed-off-by: Matthias Brugger --- arch/arm/boot/dts/mt7623.dtsi | 14 ++++++++++++++ 1 file changed, 14 insertions(+) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi index 54cff6ad0611..adb23932c2ca 100644 --- a/arch/arm/boot/dts/mt7623.dtsi +++ b/arch/arm/boot/dts/mt7623.dtsi @@ -15,6 +15,7 @@ #include #include #include +#include #include #include "skeleton64.dtsi" @@ -104,6 +105,19 @@ #reset-cells = <1>; }; + scpsys: scpsys@10006000 { + compatible = "mediatek,mt7623-scpsys", + "mediatek,mt2701-scpsys", + "syscon"; + #power-domain-cells = <1>; + reg = <0 0x10006000 0 0x1000>; + infracfg = <&infracfg>; + clocks = <&topckgen CLK_TOP_MM_SEL>, + <&topckgen CLK_TOP_MFG_SEL>, + <&topckgen CLK_TOP_ETHIF_SEL>; + clock-names = "mm", "mfg", "ethif"; + }; + watchdog: watchdog@10007000 { compatible = "mediatek,mt7623-wdt", "mediatek,mt6589-wdt"; -- cgit v1.2.3 From 7ed9672f885e4f9cc9688cb765fc6758888d9711 Mon Sep 17 00:00:00 2001 From: John Crispin Date: Wed, 26 Apr 2017 17:25:51 +0800 Subject: arm: dts: mt7623: add pinctrl nodes to the mt7623 dtsi file Add pin controller node to the mt7623.dtsi file Signed-off-by: John Crispin Signed-off-by: Sean Wang Reviewed-by: Linus Walleij Signed-off-by: Matthias Brugger --- arch/arm/boot/dts/mt7623.dtsi | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi index adb23932c2ca..e77e242b3de1 100644 --- a/arch/arm/boot/dts/mt7623.dtsi +++ b/arch/arm/boot/dts/mt7623.dtsi @@ -15,7 +15,10 @@ #include #include #include +#include #include +#include +#include #include #include "skeleton64.dtsi" @@ -105,6 +108,26 @@ #reset-cells = <1>; }; + pio: pinctrl@10005000 { + compatible = "mediatek,mt7623-pinctrl", + "mediatek,mt2701-pinctrl"; + reg = <0 0x1000b000 0 0x1000>; + mediatek,pctl-regmap = <&syscfg_pctl_a>; + pins-are-numbered; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + interrupt-parent = <&gic>; + #interrupt-cells = <2>; + interrupts = , + ; + }; + + syscfg_pctl_a: syscfg@10005000 { + compatible = "mediatek,mt7623-pctl-a-syscfg", "syscon"; + reg = <0 0x10005000 0 0x1000>; + }; + scpsys: scpsys@10006000 { compatible = "mediatek,mt7623-scpsys", "mediatek,mt2701-scpsys", -- cgit v1.2.3 From cd294fb0f067003c44ff68d00810c0f9febd8ed2 Mon Sep 17 00:00:00 2001 From: John Crispin Date: Wed, 26 Apr 2017 17:25:52 +0800 Subject: arm: dts: mt7623: add pmic wrapper nodes to the mt7623 dtsi file Add PMIC wrapper node to the mt7623.dtsi file which is necessary for the control of PMIC from Mediatek. Signed-off-by: John Crispin Signed-off-by: Sean Wang Signed-off-by: Matthias Brugger --- arch/arm/boot/dts/mt7623.dtsi | 13 +++++++++++++ 1 file changed, 13 insertions(+) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi index e77e242b3de1..1bc678691516 100644 --- a/arch/arm/boot/dts/mt7623.dtsi +++ b/arch/arm/boot/dts/mt7623.dtsi @@ -156,6 +156,19 @@ clock-names = "system-clk", "rtc-clk"; }; + pwrap: pwrap@1000d000 { + compatible = "mediatek,mt7623-pwrap", + "mediatek,mt2701-pwrap"; + reg = <0 0x1000d000 0 0x1000>; + reg-names = "pwrap"; + interrupts = ; + resets = <&infracfg MT2701_INFRA_PMIC_WRAP_RST>; + reset-names = "pwrap"; + clocks = <&infracfg CLK_INFRA_PMICSPI>, + <&infracfg CLK_INFRA_PMICWRAP>; + clock-names = "spi", "wrap"; + }; + sysirq: interrupt-controller@10200100 { compatible = "mediatek,mt7623-sysirq", "mediatek,mt6577-sysirq"; -- cgit v1.2.3 From 076f87105a3b1197e43e74737ff3060dfea8050d Mon Sep 17 00:00:00 2001 From: John Crispin Date: Wed, 26 Apr 2017 17:25:53 +0800 Subject: arm: dts: mt7623: add i2c nodes to the mt7623.dtsi file Add I2C nodes to the mt7623.dtsi file. Signed-off-by: John Crispin Signed-off-by: Sean Wang Signed-off-by: Matthias Brugger --- arch/arm/boot/dts/mt7623.dtsi | 45 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 45 insertions(+) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi index 1bc678691516..31a736410975 100644 --- a/arch/arm/boot/dts/mt7623.dtsi +++ b/arch/arm/boot/dts/mt7623.dtsi @@ -241,6 +241,51 @@ status = "disabled"; }; + i2c0: i2c@11007000 { + compatible = "mediatek,mt7623-i2c", + "mediatek,mt6577-i2c"; + reg = <0 0x11007000 0 0x70>, + <0 0x11000200 0 0x80>; + interrupts = ; + clock-div = <16>; + clocks = <&pericfg CLK_PERI_I2C0>, + <&pericfg CLK_PERI_AP_DMA>; + clock-names = "main", "dma"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c1: i2c@11008000 { + compatible = "mediatek,mt7623-i2c", + "mediatek,mt6577-i2c"; + reg = <0 0x11008000 0 0x70>, + <0 0x11000280 0 0x80>; + interrupts = ; + clock-div = <16>; + clocks = <&pericfg CLK_PERI_I2C1>, + <&pericfg CLK_PERI_AP_DMA>; + clock-names = "main", "dma"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c2: i2c@11009000 { + compatible = "mediatek,mt7623-i2c", + "mediatek,mt6577-i2c"; + reg = <0 0x11009000 0 0x70>, + <0 0x11000300 0 0x80>; + interrupts = ; + clock-div = <16>; + clocks = <&pericfg CLK_PERI_I2C2>, + <&pericfg CLK_PERI_AP_DMA>; + clock-names = "main", "dma"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + hifsys: syscon@1a000000 { compatible = "mediatek,mt7623-hifsys", "mediatek,mt2701-hifsys", -- cgit v1.2.3 From 44893591ea863e183eb97df89bbfb37a33d824a0 Mon Sep 17 00:00:00 2001 From: Sean Wang Date: Wed, 26 Apr 2017 17:25:54 +0800 Subject: arm: dts: mt7623: add spi nodes to the mt7623.dtsi file Add spi controller nodes to the mt7623.dtsi file Signed-off-by: John Crispin Signed-off-by: Sean Wang Signed-off-by: Matthias Brugger --- arch/arm/boot/dts/mt7623.dtsi | 42 ++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 42 insertions(+) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi index 31a736410975..85b2d6d90a62 100644 --- a/arch/arm/boot/dts/mt7623.dtsi +++ b/arch/arm/boot/dts/mt7623.dtsi @@ -286,6 +286,48 @@ status = "disabled"; }; + spi0: spi@1100a000 { + compatible = "mediatek,mt7623-spi", + "mediatek,mt2701-spi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0 0x1100a000 0 0x100>; + interrupts = ; + clocks = <&topckgen CLK_TOP_SYSPLL3_D2>, + <&topckgen CLK_TOP_SPI0_SEL>, + <&pericfg CLK_PERI_SPI0>; + clock-names = "parent-clk", "sel-clk", "spi-clk"; + status = "disabled"; + }; + + spi1: spi@11016000 { + compatible = "mediatek,mt7623-spi", + "mediatek,mt2701-spi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0 0x11016000 0 0x100>; + interrupts = ; + clocks = <&topckgen CLK_TOP_SYSPLL3_D2>, + <&topckgen CLK_TOP_SPI1_SEL>, + <&pericfg CLK_PERI_SPI1>; + clock-names = "parent-clk", "sel-clk", "spi-clk"; + status = "disabled"; + }; + + spi2: spi@11017000 { + compatible = "mediatek,mt7623-spi", + "mediatek,mt2701-spi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0 0x11017000 0 0x1000>; + interrupts = ; + clocks = <&topckgen CLK_TOP_SYSPLL3_D2>, + <&topckgen CLK_TOP_SPI2_SEL>, + <&pericfg CLK_PERI_SPI2>; + clock-names = "parent-clk", "sel-clk", "spi-clk"; + status = "disabled"; + }; + hifsys: syscon@1a000000 { compatible = "mediatek,mt7623-hifsys", "mediatek,mt2701-hifsys", -- cgit v1.2.3 From 1112db665677fb08bc34fe948b48d852bc71f11a Mon Sep 17 00:00:00 2001 From: John Crispin Date: Wed, 26 Apr 2017 17:25:55 +0800 Subject: arm: dts: mt7623: add nand nodes to the mt7623.dtsi file Add NAND/EEC nodes to the mt7623.dtsi file. Signed-off-by: John Crispin Signed-off-by: Sean Wang Signed-off-by: Matthias Brugger --- arch/arm/boot/dts/mt7623.dtsi | 25 +++++++++++++++++++++++++ 1 file changed, 25 insertions(+) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi index 85b2d6d90a62..3da69863321b 100644 --- a/arch/arm/boot/dts/mt7623.dtsi +++ b/arch/arm/boot/dts/mt7623.dtsi @@ -328,6 +328,31 @@ status = "disabled"; }; + nandc: nfi@1100d000 { + compatible = "mediatek,mt7623-nfc", + "mediatek,mt2701-nfc"; + reg = <0 0x1100d000 0 0x1000>; + interrupts = ; + power-domains = <&scpsys MT2701_POWER_DOMAIN_IFR_MSC>; + clocks = <&pericfg CLK_PERI_NFI>, + <&pericfg CLK_PERI_NFI_PAD>; + clock-names = "nfi_clk", "pad_clk"; + status = "disabled"; + ecc-engine = <&bch>; + #address-cells = <1>; + #size-cells = <0>; + }; + + bch: ecc@1100e000 { + compatible = "mediatek,mt7623-ecc", + "mediatek,mt2701-ecc"; + reg = <0 0x1100e000 0 0x1000>; + interrupts = ; + clocks = <&pericfg CLK_PERI_NFI_ECC>; + clock-names = "nfiecc_clk"; + status = "disabled"; + }; + hifsys: syscon@1a000000 { compatible = "mediatek,mt7623-hifsys", "mediatek,mt2701-hifsys", -- cgit v1.2.3 From ffa491c8df04f9a3989e0bba73843daba3b1a9c1 Mon Sep 17 00:00:00 2001 From: John Crispin Date: Wed, 26 Apr 2017 17:25:56 +0800 Subject: arm: dts: mt7623: add mmc nodes to the mt7623.dtsi file Add e/MMC nodes to the mt7623.dtsi file. Signed-off-by: John Crispin Signed-off-by: Sean Wang Signed-off-by: Matthias Brugger --- arch/arm/boot/dts/mt7623.dtsi | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi index 3da69863321b..35ebaa7a166c 100644 --- a/arch/arm/boot/dts/mt7623.dtsi +++ b/arch/arm/boot/dts/mt7623.dtsi @@ -353,6 +353,28 @@ status = "disabled"; }; + mmc0: mmc@11230000 { + compatible = "mediatek,mt7623-mmc", + "mediatek,mt8135-mmc"; + reg = <0 0x11230000 0 0x1000>; + interrupts = ; + clocks = <&pericfg CLK_PERI_MSDC30_0>, + <&topckgen CLK_TOP_MSDC30_0_SEL>; + clock-names = "source", "hclk"; + status = "disabled"; + }; + + mmc1: mmc@11240000 { + compatible = "mediatek,mt7623-mmc", + "mediatek,mt8135-mmc"; + reg = <0 0x11240000 0 0x1000>; + interrupts = ; + clocks = <&pericfg CLK_PERI_MSDC30_1>, + <&topckgen CLK_TOP_MSDC30_1_SEL>; + clock-names = "source", "hclk"; + status = "disabled"; + }; + hifsys: syscon@1a000000 { compatible = "mediatek,mt7623-hifsys", "mediatek,mt2701-hifsys", -- cgit v1.2.3 From 35fdd6c921b4ffa25eded3c1a51e93efd9df3ae5 Mon Sep 17 00:00:00 2001 From: John Crispin Date: Wed, 26 Apr 2017 17:25:57 +0800 Subject: arm: dts: mt7623: add usb nodes to the mt7623.dtsi file Add USB nodes to the mt7623.dtsi file. Signed-off-by: John Crispin Signed-off-by: Sean Wang Signed-off-by: Matthias Brugger --- arch/arm/boot/dts/mt7623.dtsi | 77 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 77 insertions(+) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi index 35ebaa7a166c..3ffa2275045c 100644 --- a/arch/arm/boot/dts/mt7623.dtsi +++ b/arch/arm/boot/dts/mt7623.dtsi @@ -375,12 +375,89 @@ status = "disabled"; }; + usb1: usb@1a1c0000 { + compatible = "mediatek,mt7623-xhci", + "mediatek,mt8173-xhci"; + reg = <0 0x1a1c0000 0 0x1000>, + <0 0x1a1c4700 0 0x0100>; + reg-names = "mac", "ippc"; + interrupts = ; + clocks = <&hifsys CLK_HIFSYS_USB0PHY>, + <&topckgen CLK_TOP_ETHIF_SEL>; + clock-names = "sys_ck", "free_ck"; + power-domains = <&scpsys MT2701_POWER_DOMAIN_HIF>; + phys = <&u2port0 PHY_TYPE_USB2>, <&u3port0 PHY_TYPE_USB3>; + status = "disabled"; + }; + + u3phy1: usb-phy@1a1c4000 { + compatible = "mediatek,mt7623-u3phy", "mediatek,mt2701-u3phy"; + reg = <0 0x1a1c4000 0 0x0700>; + clocks = <&clk26m>; + clock-names = "u3phya_ref"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + status = "disabled"; + + u2port0: usb-phy@1a1c4800 { + reg = <0 0x1a1c4800 0 0x0100>; + #phy-cells = <1>; + status = "okay"; + }; + + u3port0: usb-phy@1a1c4900 { + reg = <0 0x1a1c4900 0 0x0700>; + #phy-cells = <1>; + status = "okay"; + }; + }; + + usb2: usb@1a240000 { + compatible = "mediatek,mt7623-xhci", + "mediatek,mt8173-xhci"; + reg = <0 0x1a240000 0 0x1000>, + <0 0x1a244700 0 0x0100>; + reg-names = "mac", "ippc"; + interrupts = ; + clocks = <&hifsys CLK_HIFSYS_USB1PHY>, + <&topckgen CLK_TOP_ETHIF_SEL>; + clock-names = "sys_ck", "free_ck"; + power-domains = <&scpsys MT2701_POWER_DOMAIN_HIF>; + phys = <&u2port1 PHY_TYPE_USB2>, <&u3port1 PHY_TYPE_USB3>; + status = "disabled"; + }; + + u3phy2: usb-phy@1a244000 { + compatible = "mediatek,mt7623-u3phy", "mediatek,mt2701-u3phy"; + reg = <0 0x1a244000 0 0x0700>; + clocks = <&clk26m>; + clock-names = "u3phya_ref"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + status = "disabled"; + + u2port1: usb-phy@1a244800 { + reg = <0 0x1a244800 0 0x0100>; + #phy-cells = <1>; + status = "okay"; + }; + + u3port1: usb-phy@1a244900 { + reg = <0 0x1a244900 0 0x0700>; + #phy-cells = <1>; + status = "okay"; + }; + }; + hifsys: syscon@1a000000 { compatible = "mediatek,mt7623-hifsys", "mediatek,mt2701-hifsys", "syscon"; reg = <0 0x1a000000 0 0x1000>; #clock-cells = <1>; + #reset-cells = <1>; }; ethsys: syscon@1b000000 { -- cgit v1.2.3 From ffdbc3cfc504245a883ed0ef49bfd3a913caf4b0 Mon Sep 17 00:00:00 2001 From: Sean Wang Date: Wed, 26 Apr 2017 17:25:58 +0800 Subject: arm: dts: mt7623: add pwm nodes to the mt7623.dtsi file Add PWM nodes to the mt7623.dtsi file. Signed-off-by: Sean Wang Signed-off-by: Matthias Brugger --- arch/arm/boot/dts/mt7623.dtsi | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi index 3ffa2275045c..27823307d71e 100644 --- a/arch/arm/boot/dts/mt7623.dtsi +++ b/arch/arm/boot/dts/mt7623.dtsi @@ -241,6 +241,22 @@ status = "disabled"; }; + pwm: pwm@11006000 { + compatible = "mediatek,mt7623-pwm"; + reg = <0 0x11006000 0 0x1000>; + #pwm-cells = <2>; + clocks = <&topckgen CLK_TOP_PWM_SEL>, + <&pericfg CLK_PERI_PWM>, + <&pericfg CLK_PERI_PWM1>, + <&pericfg CLK_PERI_PWM2>, + <&pericfg CLK_PERI_PWM3>, + <&pericfg CLK_PERI_PWM4>, + <&pericfg CLK_PERI_PWM5>; + clock-names = "top", "main", "pwm1", "pwm2", + "pwm3", "pwm4", "pwm5"; + status = "disabled"; + }; + i2c0: i2c@11007000 { compatible = "mediatek,mt7623-i2c", "mediatek,mt6577-i2c"; -- cgit v1.2.3 From 687976ae99823b76547f16dd3e767006244ec402 Mon Sep 17 00:00:00 2001 From: Sean Wang Date: Wed, 26 Apr 2017 17:25:59 +0800 Subject: arm: dts: mt7623: add ethernet nodes to the mt7623.dtsi file Add ethernet nodes to the mt7623.dtsi file. Signed-off-by: Sean Wang Signed-off-by: Matthias Brugger --- arch/arm/boot/dts/mt7623.dtsi | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi index 27823307d71e..4d3011256470 100644 --- a/arch/arm/boot/dts/mt7623.dtsi +++ b/arch/arm/boot/dts/mt7623.dtsi @@ -483,4 +483,24 @@ reg = <0 0x1b000000 0 0x1000>; #clock-cells = <1>; }; + + eth: ethernet@1b100000 { + compatible = "mediatek,mt2701-eth", "syscon"; + reg = <0 0x1b100000 0 0x20000>; + interrupts = , + , + ; + clocks = <&topckgen CLK_TOP_ETHIF_SEL>, + <ðsys CLK_ETHSYS_ESW>, + <ðsys CLK_ETHSYS_GP1>, + <ðsys CLK_ETHSYS_GP2>, + <&apmixedsys CLK_APMIXED_TRGPLL>; + clock-names = "ethif", "esw", "gp1", "gp2", "trgpll"; + power-domains = <&scpsys MT2701_POWER_DOMAIN_ETH>; + mediatek,ethsys = <ðsys>; + mediatek,pctl = <&syscfg_pctl_a>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; }; -- cgit v1.2.3 From 465792e6f036402c6183316eaef0b0f3432ea481 Mon Sep 17 00:00:00 2001 From: Sean Wang Date: Wed, 26 Apr 2017 17:26:00 +0800 Subject: arm: dts: mt7623: add crypto engine nodes to the mt7623.dtsi file Add crypto engine nodes to the mt7623.dtsi file. Signed-off-by: Sean Wang Signed-off-by: Matthias Brugger --- arch/arm/boot/dts/mt7623.dtsi | 15 +++++++++++++++ 1 file changed, 15 insertions(+) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi index 4d3011256470..f5b8eed27510 100644 --- a/arch/arm/boot/dts/mt7623.dtsi +++ b/arch/arm/boot/dts/mt7623.dtsi @@ -503,4 +503,19 @@ #size-cells = <0>; status = "disabled"; }; + + crypto: crypto@1b240000 { + compatible = "mediatek,mt7623-crypto"; + reg = <0 0x1b240000 0 0x20000>; + interrupts = , + , + , + , + ; + clocks = <&topckgen CLK_TOP_ETHIF_SEL>, + <ðsys CLK_ETHSYS_CRYPTO>; + clock-names = "ethif","cryp"; + power-domains = <&scpsys MT2701_POWER_DOMAIN_ETH>; + status = "disabled"; + }; }; -- cgit v1.2.3 From 91044f38dae78e95409855fdf30a88f771d7f20c Mon Sep 17 00:00:00 2001 From: Sean Wang Date: Wed, 26 Apr 2017 17:26:01 +0800 Subject: arm: dts: mt7623: add ir nodes to the mt7623.dtsi file Add ir nodes to the mt7623.dtsi file. Signed-off-by: Sean Wang Signed-off-by: Matthias Brugger --- arch/arm/boot/dts/mt7623.dtsi | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi index f5b8eed27510..95c6fca0738e 100644 --- a/arch/arm/boot/dts/mt7623.dtsi +++ b/arch/arm/boot/dts/mt7623.dtsi @@ -169,6 +169,15 @@ clock-names = "spi", "wrap"; }; + cir: cir@0x10013000 { + compatible = "mediatek,mt7623-cir"; + reg = <0 0x10013000 0 0x1000>; + interrupts = ; + clocks = <&infracfg CLK_INFRA_IRRX>; + clock-names = "clk"; + status = "disabled"; + }; + sysirq: interrupt-controller@10200100 { compatible = "mediatek,mt7623-sysirq", "mediatek,mt6577-sysirq"; -- cgit v1.2.3 From 96c390a72d292d60d2fdc8880fb7dea64bb6ec13 Mon Sep 17 00:00:00 2001 From: Sean Wang Date: Wed, 26 Apr 2017 17:26:02 +0800 Subject: arm: dts: mt7623: add afe nodes to the mt7623.dtsi file Add afe nodes to the mt7623.dtsi file. Which is the necessary node for I2S audio in/out. Signed-off-by: Sean Wang Signed-off-by: Matthias Brugger --- arch/arm/boot/dts/mt7623.dtsi | 99 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 99 insertions(+) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi index 95c6fca0738e..5ed9821099c2 100644 --- a/arch/arm/boot/dts/mt7623.dtsi +++ b/arch/arm/boot/dts/mt7623.dtsi @@ -378,6 +378,105 @@ status = "disabled"; }; + afe: audio-controller@11220000 { + compatible = "mediatek,mt7623-audio", + "mediatek,mt2701-audio"; + reg = <0 0x11220000 0 0x2000>, + <0 0x112a0000 0 0x20000>; + interrupts = ; + power-domains = <&scpsys MT2701_POWER_DOMAIN_IFR_MSC>; + + clocks = <&infracfg CLK_INFRA_AUDIO>, + <&topckgen CLK_TOP_AUD_MUX1_SEL>, + <&topckgen CLK_TOP_AUD_MUX2_SEL>, + <&topckgen CLK_TOP_AUD_MUX1_DIV>, + <&topckgen CLK_TOP_AUD_MUX2_DIV>, + <&topckgen CLK_TOP_AUD_48K_TIMING>, + <&topckgen CLK_TOP_AUD_44K_TIMING>, + <&topckgen CLK_TOP_AUDPLL_MUX_SEL>, + <&topckgen CLK_TOP_APLL_SEL>, + <&topckgen CLK_TOP_AUD1PLL_98M>, + <&topckgen CLK_TOP_AUD2PLL_90M>, + <&topckgen CLK_TOP_HADDS2PLL_98M>, + <&topckgen CLK_TOP_HADDS2PLL_294M>, + <&topckgen CLK_TOP_AUDPLL>, + <&topckgen CLK_TOP_AUDPLL_D4>, + <&topckgen CLK_TOP_AUDPLL_D8>, + <&topckgen CLK_TOP_AUDPLL_D16>, + <&topckgen CLK_TOP_AUDPLL_D24>, + <&topckgen CLK_TOP_AUDINTBUS_SEL>, + <&clk26m>, + <&topckgen CLK_TOP_SYSPLL1_D4>, + <&topckgen CLK_TOP_AUD_K1_SRC_SEL>, + <&topckgen CLK_TOP_AUD_K2_SRC_SEL>, + <&topckgen CLK_TOP_AUD_K3_SRC_SEL>, + <&topckgen CLK_TOP_AUD_K4_SRC_SEL>, + <&topckgen CLK_TOP_AUD_K5_SRC_SEL>, + <&topckgen CLK_TOP_AUD_K6_SRC_SEL>, + <&topckgen CLK_TOP_AUD_K1_SRC_DIV>, + <&topckgen CLK_TOP_AUD_K2_SRC_DIV>, + <&topckgen CLK_TOP_AUD_K3_SRC_DIV>, + <&topckgen CLK_TOP_AUD_K4_SRC_DIV>, + <&topckgen CLK_TOP_AUD_K5_SRC_DIV>, + <&topckgen CLK_TOP_AUD_K6_SRC_DIV>, + <&topckgen CLK_TOP_AUD_I2S1_MCLK>, + <&topckgen CLK_TOP_AUD_I2S2_MCLK>, + <&topckgen CLK_TOP_AUD_I2S3_MCLK>, + <&topckgen CLK_TOP_AUD_I2S4_MCLK>, + <&topckgen CLK_TOP_AUD_I2S5_MCLK>, + <&topckgen CLK_TOP_AUD_I2S6_MCLK>, + <&topckgen CLK_TOP_ASM_M_SEL>, + <&topckgen CLK_TOP_ASM_H_SEL>, + <&topckgen CLK_TOP_UNIVPLL2_D4>, + <&topckgen CLK_TOP_UNIVPLL2_D2>, + <&topckgen CLK_TOP_SYSPLL_D5>; + + clock-names = "infra_sys_audio_clk", + "top_audio_mux1_sel", + "top_audio_mux2_sel", + "top_audio_mux1_div", + "top_audio_mux2_div", + "top_audio_48k_timing", + "top_audio_44k_timing", + "top_audpll_mux_sel", + "top_apll_sel", + "top_aud1_pll_98M", + "top_aud2_pll_90M", + "top_hadds2_pll_98M", + "top_hadds2_pll_294M", + "top_audpll", + "top_audpll_d4", + "top_audpll_d8", + "top_audpll_d16", + "top_audpll_d24", + "top_audintbus_sel", + "clk_26m", + "top_syspll1_d4", + "top_aud_k1_src_sel", + "top_aud_k2_src_sel", + "top_aud_k3_src_sel", + "top_aud_k4_src_sel", + "top_aud_k5_src_sel", + "top_aud_k6_src_sel", + "top_aud_k1_src_div", + "top_aud_k2_src_div", + "top_aud_k3_src_div", + "top_aud_k4_src_div", + "top_aud_k5_src_div", + "top_aud_k6_src_div", + "top_aud_i2s1_mclk", + "top_aud_i2s2_mclk", + "top_aud_i2s3_mclk", + "top_aud_i2s4_mclk", + "top_aud_i2s5_mclk", + "top_aud_i2s6_mclk", + "top_asm_m_sel", + "top_asm_h_sel", + "top_univpll2_d4", + "top_univpll2_d2", + "top_syspll_d5"; + }; + mmc0: mmc@11230000 { compatible = "mediatek,mt7623-mmc", "mediatek,mt8135-mmc"; -- cgit v1.2.3 From 88b43a7b179859ef49797cbac902106d243a6373 Mon Sep 17 00:00:00 2001 From: Sean Wang Date: Wed, 26 Apr 2017 17:26:03 +0800 Subject: arm: dts: mt7623: add rng nodes to the mt7623.dtsi file Add rng nodes to the mt7623.dtsi file. Signed-off-by: Sean Wang Signed-off-by: Matthias Brugger --- arch/arm/boot/dts/mt7623.dtsi | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi index 5ed9821099c2..c21e19c8faba 100644 --- a/arch/arm/boot/dts/mt7623.dtsi +++ b/arch/arm/boot/dts/mt7623.dtsi @@ -195,6 +195,13 @@ #clock-cells = <1>; }; + rng: rng@1020f000 { + compatible = "mediatek,mt7623-rng"; + reg = <0 0x1020f000 0 0x1000>; + clocks = <&infracfg CLK_INFRA_TRNG>; + clock-names = "rng"; + }; + gic: interrupt-controller@10211000 { compatible = "arm,cortex-a7-gic"; interrupt-controller; -- cgit v1.2.3 From 38b244b5da7377638fc24a8a637875ed03426236 Mon Sep 17 00:00:00 2001 From: Sean Wang Date: Wed, 26 Apr 2017 17:26:04 +0800 Subject: arm: dts: mt7623: add auxadc nodes to the mt7623.dtsi file Add auxadc nodes to the mt7623.dtsi file. Signed-off-by: Sean Wang Signed-off-by: Matthias Brugger --- arch/arm/boot/dts/mt7623.dtsi | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi index c21e19c8faba..25fb19bd2551 100644 --- a/arch/arm/boot/dts/mt7623.dtsi +++ b/arch/arm/boot/dts/mt7623.dtsi @@ -213,6 +213,15 @@ <0 0x10216000 0 0x2000>; }; + auxadc: adc@11001000 { + compatible = "mediatek,mt7623-auxadc", + "mediatek,mt2701-auxadc"; + reg = <0 0x11001000 0 0x1000>; + clocks = <&pericfg CLK_PERI_AUXADC>; + clock-names = "main"; + #io-channel-cells = <1>; + }; + uart0: serial@11002000 { compatible = "mediatek,mt7623-uart", "mediatek,mt6577-uart"; -- cgit v1.2.3 From 43c7a91b4b3a83e1f6f83c014cbede33a066a71f Mon Sep 17 00:00:00 2001 From: Sean Wang Date: Wed, 26 Apr 2017 17:26:05 +0800 Subject: arm: dts: mt7623: add efuse nodes to the mt7623.dtsi file Add efuse nodes to the mt7623.dtsi file. Signed-off-by: Sean Wang Signed-off-by: Matthias Brugger --- arch/arm/boot/dts/mt7623.dtsi | 11 +++++++++++ 1 file changed, 11 insertions(+) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi index 25fb19bd2551..409d4d59cb63 100644 --- a/arch/arm/boot/dts/mt7623.dtsi +++ b/arch/arm/boot/dts/mt7623.dtsi @@ -187,6 +187,17 @@ reg = <0 0x10200100 0 0x1c>; }; + efuse: efuse@10206000 { + compatible = "mediatek,mt7623-efuse", + "mediatek,mt8173-efuse"; + reg = <0 0x10206000 0 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + thermal_calibration_data: calib@424 { + reg = <0x424 0xc>; + }; + }; + apmixedsys: syscon@10209000 { compatible = "mediatek,mt7623-apmixedsys", "mediatek,mt2701-apmixedsys", -- cgit v1.2.3 From 9794a090d4931519155518e760eef3d4d6df9e5d Mon Sep 17 00:00:00 2001 From: Sean Wang Date: Wed, 26 Apr 2017 17:26:06 +0800 Subject: arm: dts: mt7623: add thermal nodes to the mt7623.dtsi file Add thermal nodes to the mt7623.dtsi file. Signed-off-by: Sean Wang Signed-off-by: Matthias Brugger --- arch/arm/boot/dts/mt7623.dtsi | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi index 409d4d59cb63..8271903a3746 100644 --- a/arch/arm/boot/dts/mt7623.dtsi +++ b/arch/arm/boot/dts/mt7623.dtsi @@ -352,6 +352,22 @@ status = "disabled"; }; + thermal: thermal@1100b000 { + #thermal-sensor-cells = <1>; + compatible = "mediatek,mt7623-thermal", + "mediatek,mt2701-thermal"; + reg = <0 0x1100b000 0 0x1000>; + interrupts = <0 70 IRQ_TYPE_LEVEL_LOW>; + clocks = <&pericfg CLK_PERI_THERM>, <&pericfg CLK_PERI_AUXADC>; + clock-names = "therm", "auxadc"; + resets = <&pericfg MT2701_PERI_THERM_SW_RST>; + reset-names = "therm"; + mediatek,auxadc = <&auxadc>; + mediatek,apmixedsys = <&apmixedsys>; + nvmem-cells = <&thermal_calibration_data>; + nvmem-cell-names = "calibration-data"; + }; + spi1: spi@11016000 { compatible = "mediatek,mt7623-spi", "mediatek,mt2701-spi"; -- cgit v1.2.3 From d4c794f30a9eac901356e809aa38d605333154c1 Mon Sep 17 00:00:00 2001 From: Sean Wang Date: Wed, 26 Apr 2017 17:26:07 +0800 Subject: arm: dts: mt7623: add Sean as one of authors for mt7623.dtsi files Add Sean as one of the authors for the mt7623.dtsi Signed-off-by: Sean Wang Signed-off-by: Matthias Brugger --- arch/arm/boot/dts/mt7623.dtsi | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi index 8271903a3746..0d0cbeadc1d6 100644 --- a/arch/arm/boot/dts/mt7623.dtsi +++ b/arch/arm/boot/dts/mt7623.dtsi @@ -1,6 +1,7 @@ /* - * Copyright (c) 2016 MediaTek Inc. + * Copyright (c) 2017 MediaTek Inc. * Author: John Crispin + * Sean Wang * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as -- cgit v1.2.3 From 1b813f3ca8755b478a20355c21516d2a077f7431 Mon Sep 17 00:00:00 2001 From: Youlin Pei Date: Fri, 7 Apr 2017 16:06:37 +0800 Subject: ARM: dts: mt2701: Add mtk-cirq node for mt2701 This commit add mtk-cirq node to mt2701 dtsi. Signed-off-by: Youlin Pei Signed-off-by: Matthias Brugger --- arch/arm/boot/dts/mt2701.dtsi | 12 +++++++++++- 1 file changed, 11 insertions(+), 1 deletion(-) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/mt2701.dtsi b/arch/arm/boot/dts/mt2701.dtsi index 803721050116..5daacfe05ea6 100644 --- a/arch/arm/boot/dts/mt2701.dtsi +++ b/arch/arm/boot/dts/mt2701.dtsi @@ -22,7 +22,7 @@ / { compatible = "mediatek,mt2701"; - interrupt-parent = <&sysirq>; + interrupt-parent = <&cirq>; cpus { #address-cells = <1>; @@ -210,6 +210,16 @@ reg = <0 0x10200100 0 0x1c>; }; + cirq: interrupt-controller@10204000 { + compatible = "mediatek,mt2701-cirq", + "mediatek,mtk-cirq"; + interrupt-controller; + #interrupt-cells = <3>; + interrupt-parent = <&sysirq>; + reg = <0 0x10204000 0 0x400>; + mediatek,ext-irq-range = <32 200>; + }; + iommu: mmsys_iommu@10205000 { compatible = "mediatek,mt2701-m4u"; reg = <0 0x10205000 0 0x1000>; -- cgit v1.2.3 From df3074f06ffc038c3f24dd5ed7d366f3a25240b2 Mon Sep 17 00:00:00 2001 From: Guochun Mao Date: Wed, 25 Jan 2017 11:38:35 +0800 Subject: arm: dts: mt2701: add nor flash node Add Mediatek nor flash node. Signed-off-by: Guochun Mao Signed-off-by: Matthias Brugger --- arch/arm/boot/dts/mt2701-evb.dts | 25 +++++++++++++++++++++++++ arch/arm/boot/dts/mt2701.dtsi | 12 ++++++++++++ 2 files changed, 37 insertions(+) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/mt2701-evb.dts b/arch/arm/boot/dts/mt2701-evb.dts index a4837985b7a7..0474fd2d602b 100644 --- a/arch/arm/boot/dts/mt2701-evb.dts +++ b/arch/arm/boot/dts/mt2701-evb.dts @@ -78,6 +78,31 @@ status = "disabled"; }; +&nor_flash { + pinctrl-names = "default"; + pinctrl-0 = <&nor_pins_default>; + status = "okay"; + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + }; +}; + +&pio { + nor_pins_default: nor { + pins1 { + pinmux = , + , + , + , + , + ; + drive-strength = ; + bias-pull-up; + }; + }; +}; + &uart0 { status = "okay"; }; diff --git a/arch/arm/boot/dts/mt2701.dtsi b/arch/arm/boot/dts/mt2701.dtsi index 5daacfe05ea6..18a851b266d4 100644 --- a/arch/arm/boot/dts/mt2701.dtsi +++ b/arch/arm/boot/dts/mt2701.dtsi @@ -344,6 +344,18 @@ status = "disabled"; }; + nor_flash: spi@11014000 { + compatible = "mediatek,mt2701-nor", + "mediatek,mt8173-nor"; + reg = <0 0x11014000 0 0xe0>; + clocks = <&pericfg CLK_PERI_FLASH>, + <&topckgen CLK_TOP_FLASH_SEL>; + clock-names = "spi", "sf"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + spi1: spi@11016000 { compatible = "mediatek,mt2701-spi"; #address-cells = <1>; -- cgit v1.2.3 From 8378be878a5dd66cdad8bf06fd01396c532159e6 Mon Sep 17 00:00:00 2001 From: Icenowy Zheng Date: Mon, 15 May 2017 16:39:58 +0800 Subject: ARM: sun8i: v3s: restore the usage of CCU definitions All the used CCU definitions are stripped from the V3s DTSI file when it's merged, as the DTSI file and the CCU device tree binding headers went to different trees. As they're all in Linus's tree now, restore the usage of the definitions. Signed-off-by: Icenowy Zheng Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun8i-v3s.dtsi | 64 +++++++++++++++++++++------------------- 1 file changed, 33 insertions(+), 31 deletions(-) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/sun8i-v3s.dtsi b/arch/arm/boot/dts/sun8i-v3s.dtsi index 71075969e5e6..3b50fa580261 100644 --- a/arch/arm/boot/dts/sun8i-v3s.dtsi +++ b/arch/arm/boot/dts/sun8i-v3s.dtsi @@ -41,6 +41,8 @@ */ #include +#include +#include / { #address-cells = <1>; @@ -55,7 +57,7 @@ compatible = "arm,cortex-a7"; device_type = "cpu"; reg = <0>; - clocks = <&ccu 14>; + clocks = <&ccu CLK_CPU>; }; }; @@ -96,15 +98,15 @@ mmc0: mmc@01c0f000 { compatible = "allwinner,sun7i-a20-mmc"; reg = <0x01c0f000 0x1000>; - clocks = <&ccu 22>, - <&ccu 45>, - <&ccu 47>, - <&ccu 46>; + clocks = <&ccu CLK_BUS_MMC0>, + <&ccu CLK_MMC0>, + <&ccu CLK_MMC0_OUTPUT>, + <&ccu CLK_MMC0_SAMPLE>; clock-names = "ahb", "mmc", "output", "sample"; - resets = <&ccu 7>; + resets = <&ccu RST_BUS_MMC0>; reset-names = "ahb"; interrupts = ; status = "disabled"; @@ -115,15 +117,15 @@ mmc1: mmc@01c10000 { compatible = "allwinner,sun7i-a20-mmc"; reg = <0x01c10000 0x1000>; - clocks = <&ccu 23>, - <&ccu 48>, - <&ccu 50>, - <&ccu 49>; + clocks = <&ccu CLK_BUS_MMC1>, + <&ccu CLK_MMC1>, + <&ccu CLK_MMC1_OUTPUT>, + <&ccu CLK_MMC1_SAMPLE>; clock-names = "ahb", "mmc", "output", "sample"; - resets = <&ccu 8>; + resets = <&ccu RST_BUS_MMC1>; reset-names = "ahb"; interrupts = ; status = "disabled"; @@ -134,15 +136,15 @@ mmc2: mmc@01c11000 { compatible = "allwinner,sun7i-a20-mmc"; reg = <0x01c11000 0x1000>; - clocks = <&ccu 24>, - <&ccu 51>, - <&ccu 53>, - <&ccu 52>; + clocks = <&ccu CLK_BUS_MMC2>, + <&ccu CLK_MMC2>, + <&ccu CLK_MMC2_OUTPUT>, + <&ccu CLK_MMC2_SAMPLE>; clock-names = "ahb", "mmc", "output", "sample"; - resets = <&ccu 9>; + resets = <&ccu RST_BUS_MMC2>; reset-names = "ahb"; interrupts = ; status = "disabled"; @@ -153,8 +155,8 @@ usb_otg: usb@01c19000 { compatible = "allwinner,sun8i-h3-musb"; reg = <0x01c19000 0x0400>; - clocks = <&ccu 29>; - resets = <&ccu 17>; + clocks = <&ccu CLK_BUS_OTG>; + resets = <&ccu RST_BUS_OTG>; interrupts = ; interrupt-names = "mc"; phys = <&usbphy 0>; @@ -169,9 +171,9 @@ <0x01c1a800 0x4>; reg-names = "phy_ctrl", "pmu0"; - clocks = <&ccu 56>; + clocks = <&ccu CLK_USB_PHY0>; clock-names = "usb0_phy"; - resets = <&ccu 0>; + resets = <&ccu RST_USB_PHY0>; reset-names = "usb0_reset"; status = "disabled"; #phy-cells = <1>; @@ -198,7 +200,7 @@ reg = <0x01c20800 0x400>; interrupts = , ; - clocks = <&ccu 37>, <&osc24M>, <&osc32k>; + clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&osc32k>; clock-names = "apb", "hosc", "losc"; gpio-controller; #gpio-cells = <3>; @@ -244,8 +246,8 @@ interrupts = ; reg-shift = <2>; reg-io-width = <4>; - clocks = <&ccu 40>; - resets = <&ccu 49>; + clocks = <&ccu CLK_BUS_UART0>; + resets = <&ccu RST_BUS_UART0>; status = "disabled"; }; @@ -255,8 +257,8 @@ interrupts = ; reg-shift = <2>; reg-io-width = <4>; - clocks = <&ccu 41>; - resets = <&ccu 50>; + clocks = <&ccu CLK_BUS_UART1>; + resets = <&ccu RST_BUS_UART1>; status = "disabled"; }; @@ -266,8 +268,8 @@ interrupts = ; reg-shift = <2>; reg-io-width = <4>; - clocks = <&ccu 42>; - resets = <&ccu 51>; + clocks = <&ccu CLK_BUS_UART2>; + resets = <&ccu RST_BUS_UART2>; status = "disabled"; }; @@ -275,8 +277,8 @@ compatible = "allwinner,sun6i-a31-i2c"; reg = <0x01c2ac00 0x400>; interrupts = ; - clocks = <&ccu 38>; - resets = <&ccu 46>; + clocks = <&ccu CLK_BUS_I2C0>; + resets = <&ccu RST_BUS_I2C0>; pinctrl-names = "default"; pinctrl-0 = <&i2c0_pins>; status = "disabled"; @@ -288,8 +290,8 @@ compatible = "allwinner,sun6i-a31-i2c"; reg = <0x01c2b000 0x400>; interrupts = ; - clocks = <&ccu 39>; - resets = <&ccu 47>; + clocks = <&ccu CLK_BUS_I2C1>; + resets = <&ccu RST_BUS_I2C1>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; -- cgit v1.2.3 From 37eac4f9c6e819238fd8d02e9597b1d15e23b6e1 Mon Sep 17 00:00:00 2001 From: Icenowy Zheng Date: Mon, 15 May 2017 16:39:59 +0800 Subject: ARM: sun8i: v3s: add LRADC device node Allwinner V3s features a LRADC like the ones in older SoCs. Add a device tree node for it. Signed-off-by: Icenowy Zheng Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun8i-v3s.dtsi | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/sun8i-v3s.dtsi b/arch/arm/boot/dts/sun8i-v3s.dtsi index 3b50fa580261..b9a3df941fb4 100644 --- a/arch/arm/boot/dts/sun8i-v3s.dtsi +++ b/arch/arm/boot/dts/sun8i-v3s.dtsi @@ -240,6 +240,13 @@ interrupts = ; }; + lradc: lradc@1c22800 { + compatible = "allwinner,sun4i-a10-lradc-keys"; + reg = <0x01c22800 0x400>; + interrupts = ; + status = "disabled"; + }; + uart0: serial@01c28000 { compatible = "snps,dw-apb-uart"; reg = <0x01c28000 0x400>; -- cgit v1.2.3 From be3c1392b3b7a0243a5a4bf3ae6fe42ee983974d Mon Sep 17 00:00:00 2001 From: Icenowy Zheng Date: Mon, 15 May 2017 16:40:00 +0800 Subject: ARM: sun8i: v3s: add pinmux for mmc1 The dock board of Lichee Pi Zero features a MicroSD slot on MMC1, which can be used with a MicroSD card or the MicroSD-slot Wi-Fi card provided by Lichee Pi Zero. Add pinmux for the mmc1 controller, and specify it in the mmc1 device node as it's the only pinmux for mmc1. Signed-off-by: Icenowy Zheng Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun8i-v3s.dtsi | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/sun8i-v3s.dtsi b/arch/arm/boot/dts/sun8i-v3s.dtsi index b9a3df941fb4..6ff50665e5e6 100644 --- a/arch/arm/boot/dts/sun8i-v3s.dtsi +++ b/arch/arm/boot/dts/sun8i-v3s.dtsi @@ -128,6 +128,8 @@ resets = <&ccu RST_BUS_MMC1>; reset-names = "ahb"; interrupts = ; + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -224,6 +226,14 @@ drive-strength = <30>; bias-pull-up; }; + + mmc1_pins: mmc1 { + pins = "PG0", "PG1", "PG2", "PG3", + "PG4", "PG5"; + function = "mmc1"; + drive-strength = <30>; + bias-pull-up; + }; }; timer@01c20c00 { -- cgit v1.2.3 From 2ae0fcc57e00c11fae80678e2a9fabbeec82a185 Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Sun, 14 May 2017 02:16:18 +0300 Subject: ARM: dts: renesas: Switch to panel-lvds bindings for Mitsubishi panels The aa104xd12 and aa121td01 panels are LVDS panels, not DPI panels. Use the correct DT bindings. Signed-off-by: Laurent Pinchart Reviewed-by: Geert Uytterhoeven Signed-off-by: Simon Horman --- arch/arm/boot/dts/r8a77xx-aa104xd12-panel.dtsi | 3 ++- arch/arm/boot/dts/r8a77xx-aa121td01-panel.dtsi | 3 ++- 2 files changed, 4 insertions(+), 2 deletions(-) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/r8a77xx-aa104xd12-panel.dtsi b/arch/arm/boot/dts/r8a77xx-aa104xd12-panel.dtsi index 65cb50f0c29f..238d14bb0ebe 100644 --- a/arch/arm/boot/dts/r8a77xx-aa104xd12-panel.dtsi +++ b/arch/arm/boot/dts/r8a77xx-aa104xd12-panel.dtsi @@ -10,10 +10,11 @@ / { panel { - compatible = "mitsubishi,aa104xd12", "panel-dpi"; + compatible = "mitsubishi,aa104xd12", "panel-lvds"; width-mm = <210>; height-mm = <158>; + data-mapping = "jeida-18"; panel-timing { /* 1024x768 @65Hz */ diff --git a/arch/arm/boot/dts/r8a77xx-aa121td01-panel.dtsi b/arch/arm/boot/dts/r8a77xx-aa121td01-panel.dtsi index a07ebf8f6938..04aafd479775 100644 --- a/arch/arm/boot/dts/r8a77xx-aa121td01-panel.dtsi +++ b/arch/arm/boot/dts/r8a77xx-aa121td01-panel.dtsi @@ -10,10 +10,11 @@ / { panel { - compatible = "mitsubishi,aa121td01", "panel-dpi"; + compatible = "mitsubishi,aa121td01", "panel-lvds"; width-mm = <261>; height-mm = <163>; + data-mapping = "jeida-18"; panel-timing { /* 1280x800 @60Hz */ -- cgit v1.2.3 From 43c3a448b3570654876eb5a111e94356dcbde37e Mon Sep 17 00:00:00 2001 From: Javier Martinez Canillas Date: Thu, 13 Apr 2017 22:04:29 -0300 Subject: ARM: dts: at91: Add generic compatible string for I2C EEPROM The at24 driver allows to register I2C EEPROM chips using different vendor and devices, but the I2C subsystem does not take the vendor into account when matching using the I2C table since it only has device entries. But when matching using an OF table, both the vendor and device has to be taken into account so the driver defines only a set of compatible strings using the "atmel" vendor as a generic fallback for compatible I2C devices. So add this generic fallback to the device node compatible string to make the device to match the driver using the OF device ID table. Signed-off-by: Javier Martinez Canillas Acked-by: Peter Rosin Signed-off-by: Alexandre Belloni --- arch/arm/boot/dts/at91-linea.dtsi | 2 +- arch/arm/boot/dts/at91-tse850-3.dts | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/at91-linea.dtsi b/arch/arm/boot/dts/at91-linea.dtsi index 0721c8472509..9bf9aaeff3e8 100644 --- a/arch/arm/boot/dts/at91-linea.dtsi +++ b/arch/arm/boot/dts/at91-linea.dtsi @@ -31,7 +31,7 @@ status = "okay"; eeprom@51 { - compatible = "st,24c64"; + compatible = "st,24c64", "atmel,24c64"; reg = <0x51>; pagesize = <32>; }; diff --git a/arch/arm/boot/dts/at91-tse850-3.dts b/arch/arm/boot/dts/at91-tse850-3.dts index 498fba3e52b5..a5c0dd630253 100644 --- a/arch/arm/boot/dts/at91-tse850-3.dts +++ b/arch/arm/boot/dts/at91-tse850-3.dts @@ -239,7 +239,7 @@ }; eeprom@50 { - compatible = "nxp,24c02"; + compatible = "nxp,24c02", "atmel,24c02"; reg = <0x50>; pagesize = <16>; }; -- cgit v1.2.3 From bc6d5d7666b73cbd8d6ed6ee3aece84903fffe0b Mon Sep 17 00:00:00 2001 From: Wenyou Yang Date: Mon, 24 Apr 2017 09:12:17 +0800 Subject: ARM: dts: at91: sama5d2: add m_can nodes Add nodes to support the Controller Area Network(M_CAN) on SAMA5D2. The version of M_CAN IP core is 3.1.0 (CREL = 0x31040730). As said in SAMA5D2 datasheet, the CAN clock is recommended to use frequencies of 20, 40 or 80 MHz. To achieve these frequencies, PMC GCLK3 must select the UPLLCK(480 MHz) as source clock and divide by 24, 12, or 6. So, the "assigned-clock-rates" property has three options: 20000000, 40000000, and 80000000. The "assigned-clock-parents" property should be referred to utmi fixedly. The MSBs [bits 31:16] of the CAN Message RAM for CAN0 and CAN1 are default configured in 0x00200000. To avoid conflict with SRAM map for PM, change them to 0x00210000 in the AT91Bootstrap via setting the CAN Memories Address-based Register(SFR_CAN) of SFR. Signed-off-by: Wenyou Yang Tested-by: Quentin Schulz Signed-off-by: Alexandre Belloni --- arch/arm/boot/dts/at91-sama5d2_xplained.dts | 24 +++++++++++++ arch/arm/boot/dts/sama5d2.dtsi | 56 +++++++++++++++++++++++++++++ 2 files changed, 80 insertions(+) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/at91-sama5d2_xplained.dts b/arch/arm/boot/dts/at91-sama5d2_xplained.dts index 0bef9e0b89c6..37de94fc9b5a 100644 --- a/arch/arm/boot/dts/at91-sama5d2_xplained.dts +++ b/arch/arm/boot/dts/at91-sama5d2_xplained.dts @@ -258,6 +258,12 @@ status = "okay"; }; + can0: can@f8054000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can0_default>; + status = "okay"; + }; + uart3: serial@fc008000 { atmel,use-dma-rx; atmel,use-dma-tx; @@ -322,6 +328,18 @@ bias-disable; }; + pinctrl_can0_default: can0_default { + pinmux = , + ; + bias-disable; + }; + + pinctrl_can1_default: can1_default { + pinmux = , + ; + bias-disable; + }; + pinctrl_charger_chglev: charger_chglev { pinmux = ; bias-disable; @@ -469,6 +487,12 @@ }; }; + + can1: can@fc050000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can1_default>; + status = "okay"; + }; }; }; diff --git a/arch/arm/boot/dts/sama5d2.dtsi b/arch/arm/boot/dts/sama5d2.dtsi index 8067c71c3a38..ce95dcb8bdf9 100644 --- a/arch/arm/boot/dts/sama5d2.dtsi +++ b/arch/arm/boot/dts/sama5d2.dtsi @@ -762,6 +762,18 @@ atmel,clk-output-range = <0 83000000>; }; + can0_clk: can0_clk { + #clock-cells = <0>; + reg = <56>; + atmel,clk-output-range = <0 83000000>; + }; + + can1_clk: can1_clk { + #clock-cells = <0>; + reg = <57>; + atmel,clk-output-range = <0 83000000>; + }; + classd_clk: classd_clk { #clock-cells = <0>; reg = <59>; @@ -890,6 +902,18 @@ #clock-cells = <0>; reg = <55>; }; + + can0_gclk: can0_gclk { + #clock-cells = <0>; + reg = <56>; + atmel,clk-output-range = <0 80000000>; + }; + + can1_gclk: can1_gclk { + #clock-cells = <0>; + reg = <57>; + atmel,clk-output-range = <0 80000000>; + }; }; }; @@ -1144,6 +1168,22 @@ clocks = <&clk32k>; }; + can0: can@f8054000 { + compatible = "bosch,m_can"; + reg = <0xf8054000 0x4000>, <0x210000 0x4000>; + reg-names = "m_can", "message_ram"; + interrupts = <56 IRQ_TYPE_LEVEL_HIGH 7>, + <64 IRQ_TYPE_LEVEL_HIGH 7>; + interrupt-names = "int0", "int1"; + clocks = <&can0_clk>, <&can0_gclk>; + clock-names = "hclk", "cclk"; + assigned-clocks = <&can0_gclk>; + assigned-clock-parents = <&utmi>; + assigned-clock-rates = <40000000>; + bosch,mram-cfg = <0x0 0 0 64 0 0 32 32>; + status = "disabled"; + }; + spi1: spi@fc000000 { compatible = "atmel,at91rm9200-spi"; reg = <0xfc000000 0x100>; @@ -1305,6 +1345,22 @@ status = "okay"; }; + can1: can@fc050000 { + compatible = "bosch,m_can"; + reg = <0xfc050000 0x4000>, <0x210000 0x4000>; + reg-names = "m_can", "message_ram"; + interrupts = <57 IRQ_TYPE_LEVEL_HIGH 7>, + <65 IRQ_TYPE_LEVEL_HIGH 7>; + interrupt-names = "int0", "int1"; + clocks = <&can1_clk>, <&can1_gclk>; + clock-names = "hclk", "cclk"; + assigned-clocks = <&can1_gclk>; + assigned-clock-parents = <&utmi>; + assigned-clock-rates = <40000000>; + bosch,mram-cfg = <0x1100 0 0 64 0 0 32 32>; + status = "disabled"; + }; + sfrbu: sfr@fc05c000 { compatible = "atmel,sama5d2-sfrbu", "syscon"; reg = <0xfc05c000 0x20>; -- cgit v1.2.3 From 79935915300c5eb88a0e94fa9148a7505c14a02a Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Sun, 14 May 2017 11:50:50 -0300 Subject: ARM: dts: imx6qdl-wandboard: Fix audio channel swap When running a stress playback/stop loop test on a mx6wandboard channel swaps can be noticed randomly. Increasing the SGTL5000 LRCLK pad strength to its maximum value fixes the issue, so add the 'lrclk-strength' property to avoid the audio channel swaps. Signed-off-by: Fabio Estevam Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6qdl-wandboard.dtsi | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/imx6qdl-wandboard.dtsi b/arch/arm/boot/dts/imx6qdl-wandboard.dtsi index 82dc5744ae19..850ceadbc2cf 100644 --- a/arch/arm/boot/dts/imx6qdl-wandboard.dtsi +++ b/arch/arm/boot/dts/imx6qdl-wandboard.dtsi @@ -88,6 +88,7 @@ clocks = <&clks IMX6QDL_CLK_CKO>; VDDA-supply = <®_2p5v>; VDDIO-supply = <®_3p3v>; + lrclk-strength = <3>; }; }; -- cgit v1.2.3 From 7d098b9108215ce8c5de545a46737f330f83ba2a Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Sun, 14 May 2017 11:50:51 -0300 Subject: ARM: dts: imx6qdl-colibri: Fix audio channel swap When running a stress playback/stop loop test on a mx6colibri channel swaps can be noticed randomly. Increasing the SGTL5000 LRCLK pad strength to its maximum value fixes the issue, so add the 'lrclk-strength' property to avoid the audio channel swaps. Signed-off-by: Fabio Estevam Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6qdl-colibri.dtsi | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/imx6qdl-colibri.dtsi b/arch/arm/boot/dts/imx6qdl-colibri.dtsi index e8078758f26c..ad84eddb6836 100644 --- a/arch/arm/boot/dts/imx6qdl-colibri.dtsi +++ b/arch/arm/boot/dts/imx6qdl-colibri.dtsi @@ -254,6 +254,7 @@ clocks = <&clks IMX6QDL_CLK_CKO>; VDDA-supply = <®_2p5v>; VDDIO-supply = <®_3p3v>; + lrclk-strength = <3>; }; /* STMPE811 touch screen controller */ -- cgit v1.2.3 From 8ebe5c541a00bdffa41a34d192ea674a8400b94a Mon Sep 17 00:00:00 2001 From: Marek Szyprowski Date: Mon, 20 Mar 2017 11:56:42 +0100 Subject: ARM: dts: exynos: Remove MFC reserved buffers During my research I found that some of the requirements for the memory buffers for MFC v6+ devices were blindly copied from the previous (v5) version and simply turned out to be excessive. The relaxed requirements are applied by the recent patches to the MFC driver and the driver is now fully functional even without the reserved memory blocks for all v6+ variants. This patch removes those reserved memory nodes from all boards having MFC v6+ hardware block. Signed-off-by: Marek Szyprowski Reviewed-by: Javier Martinez Canillas Tested-by: Javier Martinez Canillas Acked-by: Andrzej Hajda Tested-by: Smitha T Murthy Signed-off-by: Krzysztof Kozlowski --- arch/arm/boot/dts/exynos5250-arndale.dts | 1 - arch/arm/boot/dts/exynos5250-smdk5250.dts | 1 - arch/arm/boot/dts/exynos5250-spring.dts | 1 - arch/arm/boot/dts/exynos5420-arndale-octa.dts | 1 - arch/arm/boot/dts/exynos5420-peach-pit.dts | 1 - arch/arm/boot/dts/exynos5420-smdk5420.dts | 1 - arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi | 1 - arch/arm/boot/dts/exynos5800-peach-pi.dts | 1 - 8 files changed, 8 deletions(-) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts index 6098dacd09f1..6a432460eb77 100644 --- a/arch/arm/boot/dts/exynos5250-arndale.dts +++ b/arch/arm/boot/dts/exynos5250-arndale.dts @@ -14,7 +14,6 @@ #include #include #include "exynos5250.dtsi" -#include "exynos-mfc-reserved-memory.dtsi" / { model = "Insignal Arndale evaluation board based on EXYNOS5250"; diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts index a97a785ccc6b..6632f657394e 100644 --- a/arch/arm/boot/dts/exynos5250-smdk5250.dts +++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts @@ -13,7 +13,6 @@ #include #include #include "exynos5250.dtsi" -#include "exynos-mfc-reserved-memory.dtsi" / { model = "SAMSUNG SMDK5250 board based on EXYNOS5250"; diff --git a/arch/arm/boot/dts/exynos5250-spring.dts b/arch/arm/boot/dts/exynos5250-spring.dts index 4d7bdb735ed3..95c3bcace9dc 100644 --- a/arch/arm/boot/dts/exynos5250-spring.dts +++ b/arch/arm/boot/dts/exynos5250-spring.dts @@ -14,7 +14,6 @@ #include #include #include "exynos5250.dtsi" -#include "exynos-mfc-reserved-memory.dtsi" / { model = "Google Spring"; diff --git a/arch/arm/boot/dts/exynos5420-arndale-octa.dts b/arch/arm/boot/dts/exynos5420-arndale-octa.dts index 9cc83c51c925..ee1bb9b8b366 100644 --- a/arch/arm/boot/dts/exynos5420-arndale-octa.dts +++ b/arch/arm/boot/dts/exynos5420-arndale-octa.dts @@ -16,7 +16,6 @@ #include #include #include -#include "exynos-mfc-reserved-memory.dtsi" / { model = "Insignal Arndale Octa evaluation board based on EXYNOS5420"; diff --git a/arch/arm/boot/dts/exynos5420-peach-pit.dts b/arch/arm/boot/dts/exynos5420-peach-pit.dts index 1f964ec35c5e..2cd65699a29c 100644 --- a/arch/arm/boot/dts/exynos5420-peach-pit.dts +++ b/arch/arm/boot/dts/exynos5420-peach-pit.dts @@ -16,7 +16,6 @@ #include #include "exynos5420.dtsi" #include "exynos5420-cpus.dtsi" -#include "exynos-mfc-reserved-memory.dtsi" / { model = "Google Peach Pit Rev 6+"; diff --git a/arch/arm/boot/dts/exynos5420-smdk5420.dts b/arch/arm/boot/dts/exynos5420-smdk5420.dts index aaccd0da41e5..08c8ab173e87 100644 --- a/arch/arm/boot/dts/exynos5420-smdk5420.dts +++ b/arch/arm/boot/dts/exynos5420-smdk5420.dts @@ -13,7 +13,6 @@ #include "exynos5420.dtsi" #include "exynos5420-cpus.dtsi" #include -#include "exynos-mfc-reserved-memory.dtsi" / { model = "Samsung SMDK5420 board based on EXYNOS5420"; diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi index 05b9afdd6757..657535e2e3cc 100644 --- a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi +++ b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi @@ -18,7 +18,6 @@ #include #include "exynos5800.dtsi" #include "exynos5422-cpus.dtsi" -#include "exynos-mfc-reserved-memory.dtsi" / { memory@40000000 { diff --git a/arch/arm/boot/dts/exynos5800-peach-pi.dts b/arch/arm/boot/dts/exynos5800-peach-pi.dts index f9ff7f07ae0c..ecf1c916e8fc 100644 --- a/arch/arm/boot/dts/exynos5800-peach-pi.dts +++ b/arch/arm/boot/dts/exynos5800-peach-pi.dts @@ -16,7 +16,6 @@ #include #include "exynos5800.dtsi" #include "exynos5420-cpus.dtsi" -#include "exynos-mfc-reserved-memory.dtsi" / { model = "Google Peach Pi Rev 10+"; -- cgit v1.2.3 From 072f58af1dfbc39f8daf6be170d90c2465df4771 Mon Sep 17 00:00:00 2001 From: Eric Anholt Date: Tue, 25 Apr 2017 09:45:08 -0700 Subject: ARM: dts: Add devicetree for the Raspberry Pi 3, for arm32 (v6) Raspbian and Fedora have decided to support the Pi3 in 32-bit mode for now, so it's useful to be able to test that mode on an upstream kernel. It's also been useful for me to use the same board for 32-bit and 64-bit development. Signed-off-by: Eric Anholt Acked-by: Olof Johansson --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/bcm2837-rpi-3-b.dts | 1 + 2 files changed, 2 insertions(+) create mode 100644 arch/arm/boot/dts/bcm2837-rpi-3-b.dts (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 9c5e1d944d1c..a3db77b7d3d1 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -72,6 +72,7 @@ dtb-$(CONFIG_ARCH_BCM2835) += \ bcm2835-rpi-b-plus.dtb \ bcm2835-rpi-a-plus.dtb \ bcm2836-rpi-2-b.dtb \ + bcm2837-rpi-3-b.dtb \ bcm2835-rpi-zero.dtb dtb-$(CONFIG_ARCH_BCM_5301X) += \ bcm4708-asus-rt-ac56u.dtb \ diff --git a/arch/arm/boot/dts/bcm2837-rpi-3-b.dts b/arch/arm/boot/dts/bcm2837-rpi-3-b.dts new file mode 100644 index 000000000000..c72a27d908b6 --- /dev/null +++ b/arch/arm/boot/dts/bcm2837-rpi-3-b.dts @@ -0,0 +1 @@ +#include "arm64/broadcom/bcm2837-rpi-3-b.dts" -- cgit v1.2.3 From 0fe4d2181cc4cb3eba303c0e03f878d2558d0f3a Mon Sep 17 00:00:00 2001 From: Stefan Wahren Date: Fri, 31 Mar 2017 20:03:04 +0000 Subject: ARM: dts: bcm283x: Add CPU thermal zone with 1 trip point As suggested by Eduardo Valentin this adds the thermal zone for the bcm2835 SoC with its single thermal sensor. We start with the criticial trip point and leave the cooling devices empty since we don't have any at the moment. Since the coefficients could vary depending on the SoC we need to define them separate. Signed-off-by: Stefan Wahren Signed-off-by: Eric Anholt Acked-by: Eduardo Valentin --- arch/arm/boot/dts/bcm2835.dtsi | 4 ++++ arch/arm/boot/dts/bcm2836.dtsi | 4 ++++ arch/arm/boot/dts/bcm283x.dtsi | 21 +++++++++++++++++++++ 3 files changed, 29 insertions(+) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/bcm2835.dtsi b/arch/arm/boot/dts/bcm2835.dtsi index 0890d97e674d..659b6e9513b1 100644 --- a/arch/arm/boot/dts/bcm2835.dtsi +++ b/arch/arm/boot/dts/bcm2835.dtsi @@ -24,6 +24,10 @@ }; }; +&cpu_thermal { + coefficients = <(-538) 407000>; +}; + /* enable thermal sensor with the correct compatible property set */ &thermal { compatible = "brcm,bcm2835-thermal"; diff --git a/arch/arm/boot/dts/bcm2836.dtsi b/arch/arm/boot/dts/bcm2836.dtsi index 519a44f5d25a..da3deeb42592 100644 --- a/arch/arm/boot/dts/bcm2836.dtsi +++ b/arch/arm/boot/dts/bcm2836.dtsi @@ -77,6 +77,10 @@ interrupts = <8>; }; +&cpu_thermal { + coefficients = <(-538) 407000>; +}; + /* enable thermal sensor with the correct compatible property set */ &thermal { compatible = "brcm,bcm2836-thermal"; diff --git a/arch/arm/boot/dts/bcm283x.dtsi b/arch/arm/boot/dts/bcm283x.dtsi index 561f27d8d922..86a5db53da8f 100644 --- a/arch/arm/boot/dts/bcm283x.dtsi +++ b/arch/arm/boot/dts/bcm283x.dtsi @@ -19,6 +19,26 @@ bootargs = "earlyprintk console=ttyAMA0"; }; + thermal-zones { + cpu_thermal: cpu-thermal { + polling-delay-passive = <0>; + polling-delay = <1000>; + + thermal-sensors = <&thermal>; + + trips { + cpu-crit { + temperature = <80000>; + hysteresis = <0>; + type = "critical"; + }; + }; + + cooling-maps { + }; + }; + }; + soc { compatible = "simple-bus"; #address-cells = <1>; @@ -430,6 +450,7 @@ compatible = "brcm,bcm2835-thermal"; reg = <0x7e212000 0x8>; clocks = <&clocks BCM2835_CLOCK_TSENS>; + #thermal-sensor-cells = <0>; status = "disabled"; }; -- cgit v1.2.3 From 49b2c1305e69da4df1457ce3970f7258c3998460 Mon Sep 17 00:00:00 2001 From: Alexandre Belloni Date: Wed, 19 Apr 2017 22:30:12 +0200 Subject: ARM: dts: am335x-phycore-som: fix rv4162 compatible The rv4162 compatbile string is missing the vendor part, add it. Signed-off-by: Alexandre Belloni Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/am335x-phycore-som.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/am335x-phycore-som.dtsi b/arch/arm/boot/dts/am335x-phycore-som.dtsi index 14533ff6d0ad..428a25e952b0 100644 --- a/arch/arm/boot/dts/am335x-phycore-som.dtsi +++ b/arch/arm/boot/dts/am335x-phycore-som.dtsi @@ -138,7 +138,7 @@ }; i2c_rtc: rtc@68 { - compatible = "rv4162"; + compatible = "microcrystal,rv4162"; reg = <0x68>; status = "disabled"; }; -- cgit v1.2.3 From b9cb2ba7184841ecddaaacfea2ee7d38e1eefd7c Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Thu, 20 Apr 2017 16:25:06 +0530 Subject: ARM: dts: Use - instead of @ for DT OPP entries for TI SoCs Compiling the DT file with W=1, DTC warns like follows: Warning (unit_address_vs_reg): Node /opp_table0/opp@1000000000 has a unit name, but no reg property Fix this by replacing '@' with '-' as the OPP nodes will never have a "reg" property. Reported-by: Krzysztof Kozlowski Reported-by: Masahiro Yamada Suggested-by: Mark Rutland Signed-off-by: Viresh Kumar Acked-by: Rob Herring Acked-by: Tony Lindgren Signed-off-by: Tony Lindgren --- .../devicetree/bindings/cpufreq/ti-cpufreq.txt | 20 ++++++++++---------- arch/arm/boot/dts/am335x-boneblack.dts | 2 +- arch/arm/boot/dts/am33xx.dtsi | 20 ++++++++++---------- arch/arm/boot/dts/am4372.dtsi | 10 +++++----- arch/arm/boot/dts/dra7.dtsi | 4 ++-- 5 files changed, 28 insertions(+), 28 deletions(-) (limited to 'arch/arm/boot') diff --git a/Documentation/devicetree/bindings/cpufreq/ti-cpufreq.txt b/Documentation/devicetree/bindings/cpufreq/ti-cpufreq.txt index ba0e15ad5bd9..0c38e4b8fc51 100644 --- a/Documentation/devicetree/bindings/cpufreq/ti-cpufreq.txt +++ b/Documentation/devicetree/bindings/cpufreq/ti-cpufreq.txt @@ -63,64 +63,64 @@ cpu0_opp_table: opp-table { * because they can not be enabled simultaneously on a * single SoC. */ - opp50@300000000 { + opp50-300000000 { opp-hz = /bits/ 64 <300000000>; opp-microvolt = <950000 931000 969000>; opp-supported-hw = <0x06 0x0010>; opp-suspend; }; - opp100@275000000 { + opp100-275000000 { opp-hz = /bits/ 64 <275000000>; opp-microvolt = <1100000 1078000 1122000>; opp-supported-hw = <0x01 0x00FF>; opp-suspend; }; - opp100@300000000 { + opp100-300000000 { opp-hz = /bits/ 64 <300000000>; opp-microvolt = <1100000 1078000 1122000>; opp-supported-hw = <0x06 0x0020>; opp-suspend; }; - opp100@500000000 { + opp100-500000000 { opp-hz = /bits/ 64 <500000000>; opp-microvolt = <1100000 1078000 1122000>; opp-supported-hw = <0x01 0xFFFF>; }; - opp100@600000000 { + opp100-600000000 { opp-hz = /bits/ 64 <600000000>; opp-microvolt = <1100000 1078000 1122000>; opp-supported-hw = <0x06 0x0040>; }; - opp120@600000000 { + opp120-600000000 { opp-hz = /bits/ 64 <600000000>; opp-microvolt = <1200000 1176000 1224000>; opp-supported-hw = <0x01 0xFFFF>; }; - opp120@720000000 { + opp120-720000000 { opp-hz = /bits/ 64 <720000000>; opp-microvolt = <1200000 1176000 1224000>; opp-supported-hw = <0x06 0x0080>; }; - oppturbo@720000000 { + oppturbo-720000000 { opp-hz = /bits/ 64 <720000000>; opp-microvolt = <1260000 1234800 1285200>; opp-supported-hw = <0x01 0xFFFF>; }; - oppturbo@800000000 { + oppturbo-800000000 { opp-hz = /bits/ 64 <800000000>; opp-microvolt = <1260000 1234800 1285200>; opp-supported-hw = <0x06 0x0100>; }; - oppnitro@1000000000 { + oppnitro-1000000000 { opp-hz = /bits/ 64 <1000000000>; opp-microvolt = <1325000 1298500 1351500>; opp-supported-hw = <0x04 0x0200>; diff --git a/arch/arm/boot/dts/am335x-boneblack.dts b/arch/arm/boot/dts/am335x-boneblack.dts index 935ed17d22e4..d154d3133c16 100644 --- a/arch/arm/boot/dts/am335x-boneblack.dts +++ b/arch/arm/boot/dts/am335x-boneblack.dts @@ -22,7 +22,7 @@ * BeagleBone Blacks have PG 2.0 silicon which is guaranteed * to support 1GHz OPP so enable it for PG 2.0 on this board. */ - oppnitro@1000000000 { + oppnitro-1000000000 { opp-supported-hw = <0x06 0x0100>; }; }; diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi index 9e242943dcec..bdacb3dd689c 100644 --- a/arch/arm/boot/dts/am33xx.dtsi +++ b/arch/arm/boot/dts/am33xx.dtsi @@ -64,64 +64,64 @@ * because the can not be enabled simultaneously on a * single SoC. */ - opp50@300000000 { + opp50-300000000 { opp-hz = /bits/ 64 <300000000>; opp-microvolt = <950000 931000 969000>; opp-supported-hw = <0x06 0x0010>; opp-suspend; }; - opp100@275000000 { + opp100-275000000 { opp-hz = /bits/ 64 <275000000>; opp-microvolt = <1100000 1078000 1122000>; opp-supported-hw = <0x01 0x00FF>; opp-suspend; }; - opp100@300000000 { + opp100-300000000 { opp-hz = /bits/ 64 <300000000>; opp-microvolt = <1100000 1078000 1122000>; opp-supported-hw = <0x06 0x0020>; opp-suspend; }; - opp100@500000000 { + opp100-500000000 { opp-hz = /bits/ 64 <500000000>; opp-microvolt = <1100000 1078000 1122000>; opp-supported-hw = <0x01 0xFFFF>; }; - opp100@600000000 { + opp100-600000000 { opp-hz = /bits/ 64 <600000000>; opp-microvolt = <1100000 1078000 1122000>; opp-supported-hw = <0x06 0x0040>; }; - opp120@600000000 { + opp120-600000000 { opp-hz = /bits/ 64 <600000000>; opp-microvolt = <1200000 1176000 1224000>; opp-supported-hw = <0x01 0xFFFF>; }; - opp120@720000000 { + opp120-720000000 { opp-hz = /bits/ 64 <720000000>; opp-microvolt = <1200000 1176000 1224000>; opp-supported-hw = <0x06 0x0080>; }; - oppturbo@720000000 { + oppturbo-720000000 { opp-hz = /bits/ 64 <720000000>; opp-microvolt = <1260000 1234800 1285200>; opp-supported-hw = <0x01 0xFFFF>; }; - oppturbo@800000000 { + oppturbo-800000000 { opp-hz = /bits/ 64 <800000000>; opp-microvolt = <1260000 1234800 1285200>; opp-supported-hw = <0x06 0x0100>; }; - oppnitro@1000000000 { + oppnitro-1000000000 { opp-hz = /bits/ 64 <1000000000>; opp-microvolt = <1325000 1298500 1351500>; opp-supported-hw = <0x04 0x0200>; diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi index 176e09e9a45e..e5b061469bf8 100644 --- a/arch/arm/boot/dts/am4372.dtsi +++ b/arch/arm/boot/dts/am4372.dtsi @@ -59,32 +59,32 @@ compatible = "operating-points-v2-ti-cpu"; syscon = <&scm_conf>; - opp50@300000000 { + opp50-300000000 { opp-hz = /bits/ 64 <300000000>; opp-microvolt = <950000 931000 969000>; opp-supported-hw = <0xFF 0x01>; opp-suspend; }; - opp100@600000000 { + opp100-600000000 { opp-hz = /bits/ 64 <600000000>; opp-microvolt = <1100000 1078000 1122000>; opp-supported-hw = <0xFF 0x04>; }; - opp120@720000000 { + opp120-720000000 { opp-hz = /bits/ 64 <720000000>; opp-microvolt = <1200000 1176000 1224000>; opp-supported-hw = <0xFF 0x08>; }; - oppturbo@800000000 { + oppturbo-800000000 { opp-hz = /bits/ 64 <800000000>; opp-microvolt = <1260000 1234800 1285200>; opp-supported-hw = <0xFF 0x10>; }; - oppnitro@1000000000 { + oppnitro-1000000000 { opp-hz = /bits/ 64 <1000000000>; opp-microvolt = <1325000 1298500 1351500>; opp-supported-hw = <0xFF 0x20>; diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi index 57892f264cea..25908dd338ee 100644 --- a/arch/arm/boot/dts/dra7.dtsi +++ b/arch/arm/boot/dts/dra7.dtsi @@ -99,14 +99,14 @@ compatible = "operating-points-v2-ti-cpu"; syscon = <&scm_wkup>; - opp_nom@1000000000 { + opp_nom-1000000000 { opp-hz = /bits/ 64 <1000000000>; opp-microvolt = <1060000 850000 1150000>; opp-supported-hw = <0xFF 0x01>; opp-suspend; }; - opp_od@1176000000 { + opp_od-1176000000 { opp-hz = /bits/ 64 <1176000000>; opp-microvolt = <1160000 885000 1160000>; opp-supported-hw = <0xFF 0x02>; -- cgit v1.2.3 From a6f627e24139dd8f60057f4812f3fc573c2ad2e3 Mon Sep 17 00:00:00 2001 From: Roger Quadros Date: Tue, 11 Apr 2017 16:16:15 +0300 Subject: ARM: dts: dra7x-evm: Enable dual-role mode for USB1 USB1 port is micro-AB type and can function as peripheral as well as host. Enable dual-role mode for USB1. We don't want to use the OTG controller block on this platform as it limits host mode to high-speed. Instead we rely on extcon framework to give us ID events for dual-role mode detection. Signed-off-by: Roger Quadros Signed-off-by: Sekhar Nori Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/dra7-evm.dts | 3 ++- arch/arm/boot/dts/dra72-evm-common.dtsi | 3 ++- 2 files changed, 4 insertions(+), 2 deletions(-) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts index 4bc4b575c99b..c408aaa1992b 100644 --- a/arch/arm/boot/dts/dra7-evm.dts +++ b/arch/arm/boot/dts/dra7-evm.dts @@ -527,7 +527,8 @@ }; &usb1 { - dr_mode = "peripheral"; + dr_mode = "otg"; + extcon = <&extcon_usb1>; }; &usb2 { diff --git a/arch/arm/boot/dts/dra72-evm-common.dtsi b/arch/arm/boot/dts/dra72-evm-common.dtsi index ad24544adf0f..85780549bc26 100644 --- a/arch/arm/boot/dts/dra72-evm-common.dtsi +++ b/arch/arm/boot/dts/dra72-evm-common.dtsi @@ -392,7 +392,8 @@ }; &usb1 { - dr_mode = "peripheral"; + dr_mode = "otg"; + extcon = <&extcon_usb1>; }; &usb2 { -- cgit v1.2.3 From decd2db7ba3825f5a87f5d2ec159febbe8506d1e Mon Sep 17 00:00:00 2001 From: Sebastian Reichel Date: Wed, 3 May 2017 16:22:26 +0200 Subject: ARM: dts: omap4-droid4: Add bluetooth Droid 4 has WL 1285C connected to the OMAP's UART4 port, which is used for Bluetooth and most likely can also be used for controlling the FM radio and GPS receivers. Signed-off-by: Sebastian Reichel Reviewed-by: Rob Herring Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/omap4-droid4-xt894.dts | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/omap4-droid4-xt894.dts b/arch/arm/boot/dts/omap4-droid4-xt894.dts index 89eb607f4a9e..13f8d8640208 100644 --- a/arch/arm/boot/dts/omap4-droid4-xt894.dts +++ b/arch/arm/boot/dts/omap4-droid4-xt894.dts @@ -453,6 +453,15 @@ OMAP4_IOPAD(0x1c8, PIN_INPUT_PULLUP | MUX_MODE7) >; }; + + uart4_pins: pinmux_uart4_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x15c, PIN_INPUT | MUX_MODE0) /* uart4_rx */ + OMAP4_IOPAD(0x15e, PIN_OUTPUT | MUX_MODE0) /* uart4_tx */ + OMAP4_IOPAD(0x110, PIN_INPUT_PULLUP | MUX_MODE5) /* uart4_cts */ + OMAP4_IOPAD(0x112, PIN_OUTPUT_PULLUP | MUX_MODE5) /* uart4_rts */ + >; + }; }; &omap4_pmx_wkup { @@ -469,6 +478,17 @@ &omap4_pmx_core 0x17c>; }; +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&uart4_pins>; + + bluetooth { + compatible = "ti,wl1285-st"; + enable-gpios = <&gpio6 14 GPIO_ACTIVE_HIGH>; /* gpio 174 */ + max-speed = <3686400>; + }; +}; + &usbhsehci { phys = <&hsusb1_phy>; }; -- cgit v1.2.3 From 27a8133136823cd8c9296555efdc0cee42e88a0f Mon Sep 17 00:00:00 2001 From: "H. Nikolaus Schaller" Date: Mon, 15 May 2017 10:31:16 +0200 Subject: ARM: dts: OMAP5: uevm: add µSD card detect MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit If we have Linux installed in eMMC we can boot without µSD card, but inserting one is not recognised. The reason is that the card detect gpio (gpio5_152) is not configured and attached to the mmc1 interface driver and the mmc driver does not poll by default. Hence we add pinmux and gpio setup for the SDCARD_NCD signal. Signed-off-by: H. Nikolaus Schaller Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/omap5-uevm.dts | 13 +++++++++++++ 1 file changed, 13 insertions(+) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/omap5-uevm.dts b/arch/arm/boot/dts/omap5-uevm.dts index 0d42c46f13e7..ec2c8baef62a 100644 --- a/arch/arm/boot/dts/omap5-uevm.dts +++ b/arch/arm/boot/dts/omap5-uevm.dts @@ -137,6 +137,13 @@ }; }; +&mmc1 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins>; + + cd-gpios = <&gpio5 24 GPIO_ACTIVE_LOW>; /* gpio5_152 */ +}; + &omap5_pmx_core { evm_keys_pins: pinmux_evm_keys_gpio_pins { pinctrl-single,pins = < @@ -150,6 +157,12 @@ OMAP5_IOPAD(0x1c8, PIN_INPUT | MUX_MODE0) /* i2c5_sda */ >; }; + + mmc1_pins: pinmux_mmc1_pins { + pinctrl-single,pins = < + OMAP5_IOPAD(0x1d4, PIN_INPUT_PULLUP | MUX_MODE6) /* gpio5_152 */ + >; + }; }; &tpd12s015 { -- cgit v1.2.3 From a19adf8d86e822eba502486524127595372c85f6 Mon Sep 17 00:00:00 2001 From: Gerd Hoffmann Date: Wed, 8 Mar 2017 10:19:10 +0100 Subject: ARM: dts: bcm283x: switch from &sdhci to &sdhost sdcard access with the sdhost controller is faster. Read access (dd with 64k blocks on rpi2): CONFIG_MMC_SDHCI_IPROC: 11-12 MB/s CONFIG_MMC_BCM2835: 19-20 MB/s Differences on write access are pretty much in the noise. Signed-off-by: Gerd Hoffmann Acked-by: Eric Anholt --- arch/arm/boot/dts/bcm2835-rpi.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/bcm2835-rpi.dtsi b/arch/arm/boot/dts/bcm2835-rpi.dtsi index a7b5ce133784..e55b362b9d6e 100644 --- a/arch/arm/boot/dts/bcm2835-rpi.dtsi +++ b/arch/arm/boot/dts/bcm2835-rpi.dtsi @@ -65,13 +65,13 @@ &sdhci { pinctrl-names = "default"; pinctrl-0 = <&emmc_gpio48>; - status = "okay"; bus-width = <4>; }; &sdhost { pinctrl-names = "default"; pinctrl-0 = <&sdhost_gpio48>; + status = "okay"; bus-width = <4>; }; -- cgit v1.2.3 From b8a46eea52fce1de30b2c4d0c9438d2a011a86ba Mon Sep 17 00:00:00 2001 From: David Lechner Date: Tue, 11 Apr 2017 16:05:23 -0500 Subject: ARM: dts: da850-lego-ev3: Add node for LEGO MINDSTORMS EV3 Battery This adds a new node to the LEGO MINDSTORMS EV3 device tree for the battery. Signed-off-by: David Lechner [nsekhar@ti.com: minor headline fix] Signed-off-by: Sekhar Nori --- arch/arm/boot/dts/da850-lego-ev3.dts | 28 ++++++++++++++++++++++++++++ 1 file changed, 28 insertions(+) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/da850-lego-ev3.dts b/arch/arm/boot/dts/da850-lego-ev3.dts index 512604ad8b71..45983c04a8a7 100644 --- a/arch/arm/boot/dts/da850-lego-ev3.dts +++ b/arch/arm/boot/dts/da850-lego-ev3.dts @@ -172,6 +172,18 @@ gpio = <&gpio 111 GPIO_ACTIVE_HIGH>; enable-active-high; }; + + /* + * The EV3 can use 6-AA batteries or a rechargeable Li-ion battery pack. + */ + battery { + pinctrl-names = "default"; + pintctrl-0 = <&battery_pins>; + compatible = "lego,ev3-battery"; + io-channels = <&adc 4>, <&adc 3>; + io-channel-names = "voltage", "current"; + rechargeable-gpios = <&gpio 136 GPIO_ACTIVE_LOW>; + }; }; &pmx_core { @@ -228,6 +240,15 @@ 0x34 0x00000008 0x0000000f >; }; + + battery_pins: pinmux_battery_pins { + pinctrl-single,bits = < + /* GP0[6] */ + 0x04 0x00000080 0x000000f0 + /* GP8[8] */ + 0x4c 0x00000080 0x000000f0 + >; + }; }; &pinconf { @@ -342,6 +363,13 @@ &gpio { status = "okay"; + + /* Don't pull down battery voltage adc io channel */ + batt_volt_en { + gpio-hog; + gpios = <6 GPIO_ACTIVE_HIGH>; + output-low; + }; }; &usb_phy { -- cgit v1.2.3 From 9d420e9b4140f8938ad6aa0d29e2428a2af6122b Mon Sep 17 00:00:00 2001 From: Sugar Zhang Date: Wed, 17 May 2017 17:52:24 +0800 Subject: ARM: dts: rockchip: fix rk322x i2s1 pinctrl error Refer to Chapter 5.3.2 of rk3229 TRM, we can see that GPIO1A[2,4,5] using RK_FUNC_2 not RK_FUNC_1. This patch fixes it. Signed-off-by: Sugar Zhang Signed-off-by: Frank Wang Signed-off-by: Heiko Stuebner --- arch/arm/boot/dts/rk322x.dtsi | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/rk322x.dtsi b/arch/arm/boot/dts/rk322x.dtsi index 48a0c1cf4301..cc6a27dbcc29 100644 --- a/arch/arm/boot/dts/rk322x.dtsi +++ b/arch/arm/boot/dts/rk322x.dtsi @@ -621,9 +621,9 @@ <0 12 RK_FUNC_1 &pcfg_pull_none>, <0 13 RK_FUNC_1 &pcfg_pull_none>, <0 14 RK_FUNC_1 &pcfg_pull_none>, - <1 2 RK_FUNC_1 &pcfg_pull_none>, - <1 4 RK_FUNC_1 &pcfg_pull_none>, - <1 5 RK_FUNC_1 &pcfg_pull_none>; + <1 2 RK_FUNC_2 &pcfg_pull_none>, + <1 4 RK_FUNC_2 &pcfg_pull_none>, + <1 5 RK_FUNC_2 &pcfg_pull_none>; }; }; -- cgit v1.2.3 From fa206984331b2fd5c8821f0ca63c8f0eec837f2b Mon Sep 17 00:00:00 2001 From: Frank Wang Date: Wed, 17 May 2017 17:52:26 +0800 Subject: ARM: dts: rockchip: add watchdog device node on rk322x Add watchdog device node for rk322x SoC. Signed-off-by: Frank Wang Signed-off-by: Heiko Stuebner --- arch/arm/boot/dts/rk322x.dtsi | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/rk322x.dtsi b/arch/arm/boot/dts/rk322x.dtsi index cc6a27dbcc29..1b46bf81932a 100644 --- a/arch/arm/boot/dts/rk322x.dtsi +++ b/arch/arm/boot/dts/rk322x.dtsi @@ -280,6 +280,14 @@ status = "disabled"; }; + wdt: watchdog@110a0000 { + compatible = "snps,dw-wdt"; + reg = <0x110a0000 0x100>; + interrupts = ; + clocks = <&cru PCLK_CPU>; + status = "disabled"; + }; + pwm0: pwm@110b0000 { compatible = "rockchip,rk3288-pwm"; reg = <0x110b0000 0x10>; -- cgit v1.2.3 From 02131477b9028720037438948047a6233e8bdb81 Mon Sep 17 00:00:00 2001 From: Frank Wang Date: Wed, 17 May 2017 17:52:25 +0800 Subject: ARM: dts: rockchip: correct rk322x uart2 pinctrl Correct UART2 PINCTRL flag to use the correct pull up setting Signed-off-by: Frank Wang Signed-off-by: Heiko Stuebner --- arch/arm/boot/dts/rk322x.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/rk322x.dtsi b/arch/arm/boot/dts/rk322x.dtsi index 1b46bf81932a..5300a1e765ec 100644 --- a/arch/arm/boot/dts/rk322x.dtsi +++ b/arch/arm/boot/dts/rk322x.dtsi @@ -701,7 +701,7 @@ uart2 { uart2_xfer: uart2-xfer { - rockchip,pins = <1 18 RK_FUNC_2 &pcfg_pull_none>, + rockchip,pins = <1 18 RK_FUNC_2 &pcfg_pull_up>, <1 19 RK_FUNC_2 &pcfg_pull_none>; }; -- cgit v1.2.3 From 738e451174d428881910b9b7558965668216ed5b Mon Sep 17 00:00:00 2001 From: Frank Wang Date: Wed, 17 May 2017 17:52:25 +0800 Subject: ARM: dts: rockchip: add second uart2 pinctrl on rk322x Add secondary pinctrl set for UART2 which can be used to prevent conflicts with sdmmc pins. Signed-off-by: Frank Wang Signed-off-by: Heiko Stuebner --- arch/arm/boot/dts/rk322x.dtsi | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/rk322x.dtsi b/arch/arm/boot/dts/rk322x.dtsi index 5300a1e765ec..816b0796d816 100644 --- a/arch/arm/boot/dts/rk322x.dtsi +++ b/arch/arm/boot/dts/rk322x.dtsi @@ -705,6 +705,11 @@ <1 19 RK_FUNC_2 &pcfg_pull_none>; }; + uart21_xfer: uart21-xfer { + rockchip,pins = <1 10 RK_FUNC_2 &pcfg_pull_up>, + <1 9 RK_FUNC_2 &pcfg_pull_none>; + }; + uart2_cts: uart2-cts { rockchip,pins = <0 25 RK_FUNC_1 &pcfg_pull_none>; }; -- cgit v1.2.3 From 87ac8e18ee7217187170e038f2fa9a1faf59dcc7 Mon Sep 17 00:00:00 2001 From: Icenowy Zheng Date: Mon, 15 May 2017 16:40:01 +0800 Subject: ARM: sun8i: v3s: add support for Lichee Pi Zero w/ dock board The Lichee Pi Zero board has a "dock board" which needs to be soldered with the 1.27mm stamp holes on a Lichee Pi Zero board. It features: - Onboard MIC and headphone jack (not supported yet) - Ethernet port (not supported yet) - An extra MicroSD slot connected to MMC1 controller - four keys connected to the LRADC. As it needs to be soldered with the main board to use, add a stand-alone device tree for it. Signed-off-by: Icenowy Zheng Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/Makefile | 3 +- arch/arm/boot/dts/sun8i-v3s-licheepi-zero-dock.dts | 96 ++++++++++++++++++++++ 2 files changed, 98 insertions(+), 1 deletion(-) create mode 100644 arch/arm/boot/dts/sun8i-v3s-licheepi-zero-dock.dts (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 9c5e1d944d1c..929a4167fcaa 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -905,7 +905,8 @@ dtb-$(CONFIG_MACH_SUN8I) += \ sun8i-h3-orangepi-plus.dtb \ sun8i-h3-orangepi-plus2e.dtb \ sun8i-r16-parrot.dtb \ - sun8i-v3s-licheepi-zero.dtb + sun8i-v3s-licheepi-zero.dtb \ + sun8i-v3s-licheepi-zero-dock.dtb dtb-$(CONFIG_MACH_SUN9I) += \ sun9i-a80-optimus.dtb \ sun9i-a80-cubieboard4.dtb diff --git a/arch/arm/boot/dts/sun8i-v3s-licheepi-zero-dock.dts b/arch/arm/boot/dts/sun8i-v3s-licheepi-zero-dock.dts new file mode 100644 index 000000000000..d1311098ea45 --- /dev/null +++ b/arch/arm/boot/dts/sun8i-v3s-licheepi-zero-dock.dts @@ -0,0 +1,96 @@ +/* + * Copyright (C) 2016 Icenowy Zheng + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include "sun8i-v3s-licheepi-zero.dts" + +#include + +/ { + model = "Lichee Pi Zero with Dock"; + compatible = "licheepi,licheepi-zero-dock", "licheepi,licheepi-zero", + "allwinner,sun8i-v3s"; + + leds { + /* The LEDs use PG0~2 pins, which conflict with MMC1 */ + status = "disbaled"; + }; +}; + +&mmc1 { + broken-cd; + bus-width = <4>; + vmmc-supply = <®_vcc3v3>; + status = "okay"; +}; + +&lradc { + vref-supply = <®_vcc3v0>; + status = "okay"; + + button@200 { + label = "Volume Up"; + linux,code = ; + channel = <0>; + voltage = <200000>; + }; + + button@400 { + label = "Volume Down"; + linux,code = ; + channel = <0>; + voltage = <400000>; + }; + + button@600 { + label = "Select"; + linux,code = ; + channel = <0>; + voltage = <600000>; + }; + + button@800 { + label = "Start"; + linux,code = ; + channel = <0>; + voltage = <800000>; + }; +}; -- cgit v1.2.3 From 2a451bfa9870a766acc54243ed5e75435e9a1b03 Mon Sep 17 00:00:00 2001 From: Icenowy Zheng Date: Wed, 17 May 2017 21:52:57 +0800 Subject: ARM: sun8i: v3s: enable SPI Allwinner V3s SoC has a SPI controller, muxed with the MMC2 controller at PC bank. The controller itself is identical to the one in H3 SoC. Add device tree node and the only pinmux node for it. Tested with a Winbond W25Q128FV SPI NOR soldered on the Lichee Pi early sample. Signed-off-by: Icenowy Zheng Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun8i-v3s.dtsi | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/sun8i-v3s.dtsi b/arch/arm/boot/dts/sun8i-v3s.dtsi index 6ff50665e5e6..a49ebef53c91 100644 --- a/arch/arm/boot/dts/sun8i-v3s.dtsi +++ b/arch/arm/boot/dts/sun8i-v3s.dtsi @@ -234,6 +234,11 @@ drive-strength = <30>; bias-pull-up; }; + + spi0_pins: spi0 { + pins = "PC0", "PC1", "PC2", "PC3"; + function = "spi0"; + }; }; timer@01c20c00 { @@ -314,6 +319,20 @@ #size-cells = <0>; }; + spi0: spi@1c68000 { + compatible = "allwinner,sun8i-h3-spi"; + reg = <0x01c68000 0x1000>; + interrupts = ; + clocks = <&ccu CLK_BUS_SPI0>, <&ccu CLK_SPI0>; + clock-names = "ahb", "mod"; + pinctrl-names = "default"; + pinctrl-0 = <&spi0_pins>; + resets = <&ccu RST_BUS_SPI0>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + gic: interrupt-controller@01c81000 { compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic"; reg = <0x01c81000 0x1000>, -- cgit v1.2.3 From e663bc04ec448f08f465d26916bded59e182f008 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Mon, 15 May 2017 11:25:09 -0300 Subject: ARM: dts: imx6sx-sdb: Properly model the ARM and SOC regulator supplies On imx6sx-sdb rev B/C the VDD_ARM_IN and VDD_SOC_IN supplies are connected together and both are supplied by the SW1A PMIC output, so model this correctly in the device tree. Suggested-by: Marek Vasut Signed-off-by: Fabio Estevam Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6sx-sdb.dts | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/imx6sx-sdb.dts b/arch/arm/boot/dts/imx6sx-sdb.dts index 5bb8fd57e7f5..64bda498f5d3 100644 --- a/arch/arm/boot/dts/imx6sx-sdb.dts +++ b/arch/arm/boot/dts/imx6sx-sdb.dts @@ -145,3 +145,11 @@ reg = <1>; }; }; + +®_arm { + vin-supply = <&sw1a_reg>; +}; + +®_soc { + vin-supply = <&sw1a_reg>; +}; -- cgit v1.2.3 From 0d2c6f023ea173ef59a930b67e2e02a943f60b63 Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Wed, 17 May 2017 09:40:49 +0200 Subject: ARM: sun5i: a10s: Add the HDMI controller node The A10s has an HDMI controller connected to the second TCON channel. Add it to our DT. Since the TV Encoder was the only channel 1 user so far, also add the property now that we have several users. Signed-off-by: Maxime Ripard [wens@csie.org: Replaced CLK_PLL_VIDEO[01]_2X with raw numbers for now Signed-off-by: Chen-Yu Tsai --- arch/arm/boot/dts/sun5i-a10s.dtsi | 47 +++++++++++++++++++++++++++++++++++++++ arch/arm/boot/dts/sun5i.dtsi | 1 + 2 files changed, 48 insertions(+) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/sun5i-a10s.dtsi b/arch/arm/boot/dts/sun5i-a10s.dtsi index 1e38ff80366c..18f25c5e75ae 100644 --- a/arch/arm/boot/dts/sun5i-a10s.dtsi +++ b/arch/arm/boot/dts/sun5i-a10s.dtsi @@ -71,7 +71,46 @@ }; }; + display-engine { + compatible = "allwinner,sun5i-a10s-display-engine"; + allwinner,pipelines = <&fe0>; + }; + soc@01c00000 { + hdmi: hdmi@01c16000 { + compatible = "allwinner,sun5i-a10s-hdmi"; + reg = <0x01c16000 0x1000>; + interrupts = <58>; + clocks = <&ccu CLK_AHB_HDMI>, <&ccu CLK_HDMI>, + <&ccu 9>, + <&ccu 16>; + clock-names = "ahb", "mod", "pll-0", "pll-1"; + dmas = <&dma SUN4I_DMA_NORMAL 16>, + <&dma SUN4I_DMA_NORMAL 16>, + <&dma SUN4I_DMA_DEDICATED 24>; + dma-names = "ddc-tx", "ddc-rx", "audio-tx"; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + hdmi_in: port@0 { + reg = <0>; + + hdmi_in_tcon0: endpoint { + remote-endpoint = <&tcon0_out_hdmi>; + }; + }; + + hdmi_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + }; + }; + pwm: pwm@01c20e00 { compatible = "allwinner,sun5i-a10s-pwm"; reg = <0x01c20e00 0xc>; @@ -128,3 +167,11 @@ &sram_a { }; + +&tcon0_out { + tcon0_out_hdmi: endpoint@2 { + reg = <2>; + remote-endpoint = <&hdmi_in_tcon0>; + allwinner,tcon-channel = <1>; + }; +}; diff --git a/arch/arm/boot/dts/sun5i.dtsi b/arch/arm/boot/dts/sun5i.dtsi index 5175f9cc9bed..0e29f1d98a9e 100644 --- a/arch/arm/boot/dts/sun5i.dtsi +++ b/arch/arm/boot/dts/sun5i.dtsi @@ -272,6 +272,7 @@ tcon0_out_tve0: endpoint@1 { reg = <1>; remote-endpoint = <&tve0_in_tcon0>; + allwinner,tcon-channel = <1>; }; }; }; -- cgit v1.2.3 From d050971c42b0df9056114086ce835a8db0074b84 Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Wed, 17 May 2017 09:40:50 +0200 Subject: ARM: sun5i: a10s-olinuxino: Enable HDMI The A10s Olinuxino has an HDMI connector. Make sure we can use it. Acked-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard Signed-off-by: Chen-Yu Tsai --- arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts | 29 ++++++++++++++++++++++++ 1 file changed, 29 insertions(+) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts b/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts index eff36fe1aaa3..da95118af4dc 100644 --- a/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts +++ b/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts @@ -63,6 +63,17 @@ stdout-path = "serial0:115200n8"; }; + connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + leds { compatible = "gpio-leds"; pinctrl-names = "default"; @@ -76,6 +87,10 @@ }; }; +&be0 { + status = "okay"; +}; + &ehci0 { status = "okay"; }; @@ -91,6 +106,16 @@ status = "okay"; }; +&hdmi { + status = "okay"; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + &i2c0 { pinctrl-names = "default"; pinctrl-0 = <&i2c0_pins_a>; @@ -248,6 +273,10 @@ status = "okay"; }; +&tcon0 { + status = "okay"; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pins_a>; -- cgit v1.2.3 From 1a8c176b2f15b879746b85b4c0d585f2016b65e3 Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Fri, 19 May 2017 15:06:10 +0800 Subject: ARM: sun8i: a83t: Add CCU device nodes Now that we have support for the A83T CCU, add a device node for it, and replace any existing placeholder clock phandles with the correct ones. Signed-off-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun8i-a83t.dtsi | 15 +++++++++++++-- 1 file changed, 13 insertions(+), 2 deletions(-) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/sun8i-a83t.dtsi b/arch/arm/boot/dts/sun8i-a83t.dtsi index c0a1e4f74b89..c9a5d07b2ada 100644 --- a/arch/arm/boot/dts/sun8i-a83t.dtsi +++ b/arch/arm/boot/dts/sun8i-a83t.dtsi @@ -162,13 +162,23 @@ #size-cells = <1>; ranges; + ccu: clock@1c20000 { + compatible = "allwinner,sun8i-a83t-ccu"; + reg = <0x01c20000 0x400>; + clocks = <&osc24M>, <&osc16Md512>; + clock-names = "hosc", "losc"; + #clock-cells = <1>; + #reset-cells = <1>; + }; + pio: pinctrl@1c20800 { compatible = "allwinner,sun8i-a83t-pinctrl"; interrupts = , , ; reg = <0x01c20800 0x400>; - clocks = <&osc24M>; + clocks = <&ccu 45>, <&osc24M>, <&osc16Md512>; + clock-names = "apb", "hosc", "losc"; gpio-controller; interrupt-controller; #interrupt-cells = <3>; @@ -214,7 +224,8 @@ interrupts = ; reg-shift = <2>; reg-io-width = <4>; - clocks = <&osc24M>; + clocks = <&ccu 53>; + resets = <&ccu 40>; status = "disabled"; }; -- cgit v1.2.3 From c31d488470820ab18eabd2c5bb9a08834d554d28 Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Fri, 19 May 2017 15:06:11 +0800 Subject: ARM: sun8i: a83t: Set clock accuracy for 24MHz oscillator The datasheets for Allwinner SoCs set strict requirements on the stability of the external crystal oscillators. Add the accuracy for the main 24MHz oscillator to the device tree. Signed-off-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun8i-a83t.dtsi | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/sun8i-a83t.dtsi b/arch/arm/boot/dts/sun8i-a83t.dtsi index c9a5d07b2ada..e12dd7170b8f 100644 --- a/arch/arm/boot/dts/sun8i-a83t.dtsi +++ b/arch/arm/boot/dts/sun8i-a83t.dtsi @@ -126,6 +126,7 @@ #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <24000000>; + clock-accuracy = <50000>; clock-output-names = "osc24M"; }; -- cgit v1.2.3 From 30ee58146b53d83e90fc5326488e1e48a5a3aba4 Mon Sep 17 00:00:00 2001 From: Elaine Zhang Date: Wed, 17 May 2017 18:16:14 +0800 Subject: ARM: dts: rockchip: set default rates for core clocks on rk322x Set sane default frequencies for CPLL, GPLL and some other core clocks on the rk322x. Signed-off-by: Elaine Zhang Signed-off-by: Frank Wang Signed-off-by: Heiko Stuebner --- arch/arm/boot/dts/rk322x.dtsi | 14 ++++++++++++-- 1 file changed, 12 insertions(+), 2 deletions(-) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/rk322x.dtsi b/arch/arm/boot/dts/rk322x.dtsi index 816b0796d816..c256df9a2cd8 100644 --- a/arch/arm/boot/dts/rk322x.dtsi +++ b/arch/arm/boot/dts/rk322x.dtsi @@ -346,8 +346,18 @@ rockchip,grf = <&grf>; #clock-cells = <1>; #reset-cells = <1>; - assigned-clocks = <&cru PLL_GPLL>; - assigned-clock-rates = <594000000>; + assigned-clocks = + <&cru PLL_GPLL>, <&cru ARMCLK>, + <&cru PLL_CPLL>, <&cru ACLK_PERI>, + <&cru HCLK_PERI>, <&cru PCLK_PERI>, + <&cru ACLK_CPU>, <&cru HCLK_CPU>, + <&cru PCLK_CPU>; + assigned-clock-rates = + <594000000>, <816000000>, + <500000000>, <150000000>, + <150000000>, <75000000>, + <150000000>, <150000000>, + <75000000>; }; thermal-zones { -- cgit v1.2.3 From 9f12da43c327b4eed4c7dc47a8ac37b05e39c3d0 Mon Sep 17 00:00:00 2001 From: Finley Xiao Date: Wed, 17 May 2017 18:16:15 +0800 Subject: ARM: dts: rockchip: add operating-points-v2 for cpu on rk322x This patch adds a new opp table for cpu on rk322x SoC. Signed-off-by: Finley Xiao Signed-off-by: Frank Wang Acked-by: Viresh Kumar Signed-off-by: Heiko Stuebner --- arch/arm/boot/dts/rk322x.dtsi | 36 ++++++++++++++++++++++++++++++++---- 1 file changed, 32 insertions(+), 4 deletions(-) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/rk322x.dtsi b/arch/arm/boot/dts/rk322x.dtsi index c256df9a2cd8..c09e17cc4ab0 100644 --- a/arch/arm/boot/dts/rk322x.dtsi +++ b/arch/arm/boot/dts/rk322x.dtsi @@ -66,10 +66,7 @@ compatible = "arm,cortex-a7"; reg = <0xf00>; resets = <&cru SRST_CORE0>; - operating-points = < - /* KHz uV */ - 816000 1000000 - >; + operating-points-v2 = <&cpu0_opp_table>; #cooling-cells = <2>; /* min followed by max */ clock-latency = <40000>; clocks = <&cru ARMCLK>; @@ -80,6 +77,7 @@ compatible = "arm,cortex-a7"; reg = <0xf01>; resets = <&cru SRST_CORE1>; + operating-points-v2 = <&cpu0_opp_table>; }; cpu2: cpu@f02 { @@ -87,6 +85,7 @@ compatible = "arm,cortex-a7"; reg = <0xf02>; resets = <&cru SRST_CORE2>; + operating-points-v2 = <&cpu0_opp_table>; }; cpu3: cpu@f03 { @@ -94,6 +93,35 @@ compatible = "arm,cortex-a7"; reg = <0xf03>; resets = <&cru SRST_CORE3>; + operating-points-v2 = <&cpu0_opp_table>; + }; + }; + + cpu0_opp_table: opp_table0 { + compatible = "operating-points-v2"; + opp-shared; + + opp-408000000 { + opp-hz = /bits/ 64 <408000000>; + opp-microvolt = <950000>; + clock-latency-ns = <40000>; + opp-suspend; + }; + opp-600000000 { + opp-hz = /bits/ 64 <600000000>; + opp-microvolt = <975000>; + }; + opp-816000000 { + opp-hz = /bits/ 64 <816000000>; + opp-microvolt = <1000000>; + }; + opp-1008000000 { + opp-hz = /bits/ 64 <1008000000>; + opp-microvolt = <1175000>; + }; + opp-1200000000 { + opp-hz = /bits/ 64 <1200000000>; + opp-microvolt = <1275000>; }; }; -- cgit v1.2.3 From 2b3f2f37ef4d7b9f233d7dc9529b789709b6c988 Mon Sep 17 00:00:00 2001 From: Rocky Hao Date: Wed, 17 May 2017 18:16:17 +0800 Subject: ARM: dts: rockchip: set a sane frequence for tsadc on rk322x Update freq of tsadc's working clock as 32768 hz, if not set, tsadc will work at a default frequence. Signed-off-by: Rocky Hao Signed-off-by: Frank Wang Signed-off-by: Heiko Stuebner --- arch/arm/boot/dts/rk322x.dtsi | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/rk322x.dtsi b/arch/arm/boot/dts/rk322x.dtsi index c09e17cc4ab0..df574135797a 100644 --- a/arch/arm/boot/dts/rk322x.dtsi +++ b/arch/arm/boot/dts/rk322x.dtsi @@ -434,6 +434,8 @@ interrupts = ; clocks = <&cru SCLK_TSADC>, <&cru PCLK_TSADC>; clock-names = "tsadc", "apb_pclk"; + assigned-clocks = <&cru SCLK_TSADC>; + assigned-clock-rates = <32768>; resets = <&cru SRST_TSADC>; reset-names = "tsadc-apb"; pinctrl-names = "init", "default", "sleep"; -- cgit v1.2.3 From 5c73cdf2bdf0570599d2fb849e9f54889be6df18 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Wed, 17 May 2017 13:44:19 -0300 Subject: ARM: dts: omap3: Remove 'enable-active-low' property Property 'enable-active-low' does not exist. Only 'enable-active-high' is valid, and when this property is absent the gpio regulator will act as active low by default. So remove the unexisting 'enable-active-low' property. Signed-off-by: Fabio Estevam Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/omap3-evm-common.dtsi | 1 - arch/arm/boot/dts/omap3-sb-t35.dtsi | 1 - arch/arm/boot/dts/omap3-tao3530.dtsi | 1 - 3 files changed, 3 deletions(-) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/omap3-evm-common.dtsi b/arch/arm/boot/dts/omap3-evm-common.dtsi index 090475083c2f..7780e2528697 100644 --- a/arch/arm/boot/dts/omap3-evm-common.dtsi +++ b/arch/arm/boot/dts/omap3-evm-common.dtsi @@ -76,7 +76,6 @@ &lcd_3v3 { gpio = <&gpio5 25 GPIO_ACTIVE_LOW>; /* gpio153 */ - enable-active-low; }; &lcd0 { diff --git a/arch/arm/boot/dts/omap3-sb-t35.dtsi b/arch/arm/boot/dts/omap3-sb-t35.dtsi index 73643fabde5d..91e15af78949 100644 --- a/arch/arm/boot/dts/omap3-sb-t35.dtsi +++ b/arch/arm/boot/dts/omap3-sb-t35.dtsi @@ -50,7 +50,6 @@ pinctrl-names = "default"; pinctrl-0 = <&sb_t35_audio_amp>; gpio = <&gpio2 29 GPIO_ACTIVE_LOW>; /* gpio_61 */ - enable-active-low; regulator-always-on; }; }; diff --git a/arch/arm/boot/dts/omap3-tao3530.dtsi b/arch/arm/boot/dts/omap3-tao3530.dtsi index dc80886b5329..06ac0f80bcf0 100644 --- a/arch/arm/boot/dts/omap3-tao3530.dtsi +++ b/arch/arm/boot/dts/omap3-tao3530.dtsi @@ -63,7 +63,6 @@ regulator-min-microvolt = <3150000>; regulator-max-microvolt = <3150000>; gpio = <&gpio5 29 GPIO_ACTIVE_LOW>; /* gpio_157 */ - enable-active-low; startup-delay-us = <10000>; }; }; -- cgit v1.2.3 From e3df026c594c77f0de1bdaa413d591b4345e4b6a Mon Sep 17 00:00:00 2001 From: Guillaume Tucker Date: Wed, 3 May 2017 10:56:26 +0100 Subject: ARM: dts: rockchip: add ARM Mali GPU node for rk3288 Add Mali GPU device tree node for the rk3288 SoC, with devfreq opp table. Signed-off-by: Guillaume Tucker Tested-by: Enric Balletbo i Serra Signed-off-by: Heiko Stuebner --- arch/arm/boot/dts/rk3288.dtsi | 43 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 43 insertions(+) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi index ad5d6022e95f..2484f11761ea 100644 --- a/arch/arm/boot/dts/rk3288.dtsi +++ b/arch/arm/boot/dts/rk3288.dtsi @@ -43,6 +43,7 @@ #include #include #include +#include #include #include #include @@ -1125,6 +1126,48 @@ }; }; + gpu: mali@ffa30000 { + compatible = "rockchip,rk3288-mali", "arm,mali-t760", "arm,mali-midgard"; + reg = <0xffa30000 0x10000>; + interrupts = , + , + ; + interrupt-names = "job", "mmu", "gpu"; + clocks = <&cru ACLK_GPU>; + operating-points-v2 = <&gpu_opp_table>; + power-domains = <&power RK3288_PD_GPU>; + status = "disabled"; + }; + + gpu_opp_table: gpu-opp-table { + compatible = "operating-points-v2"; + + opp@100000000 { + opp-hz = /bits/ 64 <100000000>; + opp-microvolt = <950000>; + }; + opp@200000000 { + opp-hz = /bits/ 64 <200000000>; + opp-microvolt = <950000>; + }; + opp@300000000 { + opp-hz = /bits/ 64 <300000000>; + opp-microvolt = <1000000>; + }; + opp@400000000 { + opp-hz = /bits/ 64 <400000000>; + opp-microvolt = <1100000>; + }; + opp@500000000 { + opp-hz = /bits/ 64 <500000000>; + opp-microvolt = <1200000>; + }; + opp@600000000 { + opp-hz = /bits/ 64 <600000000>; + opp-microvolt = <1250000>; + }; + }; + qos_gpu_r: qos@ffaa0000 { compatible = "syscon"; reg = <0xffaa0000 0x20>; -- cgit v1.2.3 From d6823b67288aad6810336b963140059721c83644 Mon Sep 17 00:00:00 2001 From: Guillaume Tucker Date: Wed, 3 May 2017 10:56:27 +0100 Subject: ARM: dts: rockchip: enable ARM Mali GPU on rk3288-rock2-som Add reference to the Mali GPU device tree node on the rk3288-rock2-som platform. Tested on a Radxa Rock2 Square board. Signed-off-by: Guillaume Tucker Signed-off-by: Heiko Stuebner --- arch/arm/boot/dts/rk3288-rock2-som.dtsi | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/rk3288-rock2-som.dtsi b/arch/arm/boot/dts/rk3288-rock2-som.dtsi index f0778a46bca9..749a9b86e6e2 100644 --- a/arch/arm/boot/dts/rk3288-rock2-som.dtsi +++ b/arch/arm/boot/dts/rk3288-rock2-som.dtsi @@ -113,6 +113,11 @@ tx_delay = <0x30>; }; +&gpu { + mali-supply = <&vdd_gpu>; + status = "okay"; +}; + &i2c0 { status = "okay"; -- cgit v1.2.3 From 93dedf52894e360731de17bdd9358873b36c3e0f Mon Sep 17 00:00:00 2001 From: Guillaume Tucker Date: Wed, 3 May 2017 10:56:28 +0100 Subject: ARM: dts: rockchip: enable ARM Mali GPU on rk3288-firefly Add reference to the Mali GPU device tree node on rk3288-firefly. Tested on Firefly board. Signed-off-by: Guillaume Tucker Signed-off-by: Heiko Stuebner --- arch/arm/boot/dts/rk3288-firefly.dtsi | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/rk3288-firefly.dtsi b/arch/arm/boot/dts/rk3288-firefly.dtsi index 10793ac18599..864747342e3e 100644 --- a/arch/arm/boot/dts/rk3288-firefly.dtsi +++ b/arch/arm/boot/dts/rk3288-firefly.dtsi @@ -219,6 +219,11 @@ status = "ok"; }; +&gpu { + mali-supply = <&vdd_gpu>; + status = "okay"; +}; + &hdmi { ddc-i2c-bus = <&i2c5>; status = "okay"; -- cgit v1.2.3 From 08e779e59950affaec4f677b22fda6a1ab150a43 Mon Sep 17 00:00:00 2001 From: Enric Balletbo i Serra Date: Wed, 3 May 2017 10:56:29 +0100 Subject: ARM: dts: rockchip: enable ARM Mali GPU on rk3288-veyron Add reference to the Mali GPU device tree node on rk3288-veyron. Tested on Minnie and Jerry boards. Signed-off-by: Enric Balletbo i Serra Signed-off-by: Guillaume Tucker Signed-off-by: Heiko Stuebner --- arch/arm/boot/dts/rk3288-veyron.dtsi | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/rk3288-veyron.dtsi b/arch/arm/boot/dts/rk3288-veyron.dtsi index 5d1eb0a25827..d709fa1847f9 100644 --- a/arch/arm/boot/dts/rk3288-veyron.dtsi +++ b/arch/arm/boot/dts/rk3288-veyron.dtsi @@ -161,6 +161,11 @@ pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>; }; +&gpu { + mali-supply = <&vdd_gpu>; + status = "okay"; +}; + &hdmi { ddc-i2c-bus = <&i2c5>; status = "okay"; -- cgit v1.2.3 From 38281a4754809d830d9a4a56d1b2ab7902b9fd6d Mon Sep 17 00:00:00 2001 From: Andrey Smirnov Date: Mon, 15 May 2017 07:52:59 -0700 Subject: ARM: dts: imx: Reintroduce 'anatop-enable-bit' where appropriate Now that support for 'anatop-enable-bit' has been added to ANADIG driver, reintroduce 'anatop-enable-bit' for all applicable LDOs. Cc: yurovsky@gmail.com Cc: Dong Aisheng Cc: Sascha Hauer Cc: Fabio Estevam Cc: Rob Herring Cc: Mark Rutland Cc: Russell King Cc: devicetree@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Andrey Smirnov Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6qdl.dtsi | 3 +++ arch/arm/boot/dts/imx6sl.dtsi | 3 +++ arch/arm/boot/dts/imx6sx.dtsi | 3 +++ arch/arm/boot/dts/imx6ul.dtsi | 1 + arch/arm/boot/dts/imx7s.dtsi | 1 + 5 files changed, 11 insertions(+) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi index 2c2af6737b0e..f325411f66aa 100644 --- a/arch/arm/boot/dts/imx6qdl.dtsi +++ b/arch/arm/boot/dts/imx6qdl.dtsi @@ -644,6 +644,7 @@ anatop-min-bit-val = <4>; anatop-min-voltage = <800000>; anatop-max-voltage = <1375000>; + anatop-enable-bit = <0>; }; regulator-3p0 { @@ -658,6 +659,7 @@ anatop-min-bit-val = <0>; anatop-min-voltage = <2625000>; anatop-max-voltage = <3400000>; + anatop-enable-bit = <0>; }; regulator-2p5 { @@ -672,6 +674,7 @@ anatop-min-bit-val = <0>; anatop-min-voltage = <2100000>; anatop-max-voltage = <2875000>; + anatop-enable-bit = <0>; }; reg_arm: regulator-vddcore { diff --git a/arch/arm/boot/dts/imx6sl.dtsi b/arch/arm/boot/dts/imx6sl.dtsi index cc9572ea2860..3243af4a9984 100644 --- a/arch/arm/boot/dts/imx6sl.dtsi +++ b/arch/arm/boot/dts/imx6sl.dtsi @@ -530,6 +530,7 @@ anatop-min-bit-val = <4>; anatop-min-voltage = <800000>; anatop-max-voltage = <1375000>; + anatop-enable-bit = <0>; }; regulator-3p0 { @@ -544,6 +545,7 @@ anatop-min-bit-val = <0>; anatop-min-voltage = <2625000>; anatop-max-voltage = <3400000>; + anatop-enable-bit = <0>; }; regulator-2p5 { @@ -558,6 +560,7 @@ anatop-min-bit-val = <0>; anatop-min-voltage = <2100000>; anatop-max-voltage = <2850000>; + anatop-enable-bit = <0>; }; reg_arm: regulator-vddcore { diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi index 3f1416be4c36..f16b9df9d0c6 100644 --- a/arch/arm/boot/dts/imx6sx.dtsi +++ b/arch/arm/boot/dts/imx6sx.dtsi @@ -587,6 +587,7 @@ anatop-min-bit-val = <4>; anatop-min-voltage = <800000>; anatop-max-voltage = <1375000>; + anatop-enable-bit = <0>; }; regulator-3p0 { @@ -601,6 +602,7 @@ anatop-min-bit-val = <0>; anatop-min-voltage = <2625000>; anatop-max-voltage = <3400000>; + anatop-enable-bit = <0>; }; regulator-2p5 { @@ -615,6 +617,7 @@ anatop-min-bit-val = <0>; anatop-min-voltage = <2100000>; anatop-max-voltage = <2875000>; + anatop-enable-bit = <0>; }; reg_arm: regulator-vddcore { diff --git a/arch/arm/boot/dts/imx6ul.dtsi b/arch/arm/boot/dts/imx6ul.dtsi index b9d7d2d09402..6da2b77edd46 100644 --- a/arch/arm/boot/dts/imx6ul.dtsi +++ b/arch/arm/boot/dts/imx6ul.dtsi @@ -542,6 +542,7 @@ anatop-min-bit-val = <0>; anatop-min-voltage = <2625000>; anatop-max-voltage = <3400000>; + anatop-enable-bit = <0>; }; reg_arm: regulator-vddcore { diff --git a/arch/arm/boot/dts/imx7s.dtsi b/arch/arm/boot/dts/imx7s.dtsi index 843eb379e1ea..b4464adfbbde 100644 --- a/arch/arm/boot/dts/imx7s.dtsi +++ b/arch/arm/boot/dts/imx7s.dtsi @@ -516,6 +516,7 @@ anatop-min-bit-val = <8>; anatop-min-voltage = <800000>; anatop-max-voltage = <1200000>; + anatop-enable-bit = <0>; }; }; -- cgit v1.2.3 From 0f90b43ac71b484eebfc73e0f517110327071230 Mon Sep 17 00:00:00 2001 From: Andrey Smirnov Date: Mon, 15 May 2017 07:53:01 -0700 Subject: ARM: dts: imx7s: Add node for GPC Add node for GPC and specify as a parent interrupt controller for SoC bus. Cc: yurovsky@gmail.com Cc: Dong Aisheng Cc: Sascha Hauer Cc: Fabio Estevam Cc: Rob Herring Cc: Mark Rutland Cc: Russell King Cc: devicetree@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Andrey Smirnov Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx7s.dtsi | 26 +++++++++++++++++++++++++- 1 file changed, 25 insertions(+), 1 deletion(-) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/imx7s.dtsi b/arch/arm/boot/dts/imx7s.dtsi index b4464adfbbde..b6ed1036f9e3 100644 --- a/arch/arm/boot/dts/imx7s.dtsi +++ b/arch/arm/boot/dts/imx7s.dtsi @@ -42,6 +42,7 @@ */ #include +#include #include #include #include @@ -119,7 +120,7 @@ #address-cells = <1>; #size-cells = <1>; compatible = "simple-bus"; - interrupt-parent = <&intc>; + interrupt-parent = <&gpc>; ranges; funnel@30041000 { @@ -301,6 +302,7 @@ interrupts = ; #interrupt-cells = <3>; interrupt-controller; + interrupt-parent = <&intc>; reg = <0x31001000 0x1000>, <0x31002000 0x2000>, <0x31004000 0x2000>, @@ -309,6 +311,7 @@ timer { compatible = "arm,armv7-timer"; + interrupt-parent = <&intc>; interrupts = , , , @@ -564,6 +567,27 @@ interrupts = ; #reset-cells = <1>; }; + + gpc: gpc@303a0000 { + compatible = "fsl,imx7d-gpc"; + reg = <0x303a0000 0x10000>; + interrupt-controller; + interrupts = ; + #interrupt-cells = <3>; + interrupt-parent = <&intc>; + #power-domain-cells = <1>; + + pgc { + #address-cells = <1>; + #size-cells = <0>; + + pgc_pcie_phy: pgc-power-domain@IMX7_POWER_DOMAIN_PCIE_PHY { + #power-domain-cells = <0>; + reg = ; + power-supply = <®_1p0d>; + }; + }; + }; }; aips2: aips-bus@30400000 { -- cgit v1.2.3 From 9760c06bc20f82529aec4874b199a8e3437442a2 Mon Sep 17 00:00:00 2001 From: Andrey Smirnov Date: Mon, 15 May 2017 07:53:02 -0700 Subject: ARM: dts: imx7s: Mark 'gpr' compatible with i.MX6 variant List GPR block as compatible "fsl,imx6q-iomuxc-gpr" to support drivers requesting it that way (PCIe driver is one example). Cc: yurovsky@gmail.com Cc: Dong Aisheng Cc: Sascha Hauer Cc: Fabio Estevam Cc: Rob Herring Cc: Mark Rutland Cc: Russell King Cc: devicetree@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Andrey Smirnov Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx7s.dtsi | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/imx7s.dtsi b/arch/arm/boot/dts/imx7s.dtsi index b6ed1036f9e3..aa1f4c3e915c 100644 --- a/arch/arm/boot/dts/imx7s.dtsi +++ b/arch/arm/boot/dts/imx7s.dtsi @@ -491,7 +491,8 @@ }; gpr: iomuxc-gpr@30340000 { - compatible = "fsl,imx7d-iomuxc-gpr", "syscon"; + compatible = "fsl,imx7d-iomuxc-gpr", + "fsl,imx6q-iomuxc-gpr", "syscon"; reg = <0x30340000 0x10000>; }; -- cgit v1.2.3 From 184f39b57cab6fd00b045689d300070ca0ceac78 Mon Sep 17 00:00:00 2001 From: Andrey Smirnov Date: Mon, 15 May 2017 07:53:03 -0700 Subject: ARM: dts: imx7d-sdb: Add GPIO expander node Add node for U38, a 74LV595PW serial-in shift register that acts as a GPIO expander on the board. Cc: yurovsky@gmail.com Cc: Dong Aisheng Cc: Sascha Hauer Cc: Fabio Estevam Cc: Rob Herring Cc: Mark Rutland Cc: Russell King Cc: devicetree@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Andrey Smirnov Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx7d-sdb.dts | 29 +++++++++++++++++++++++++++++ 1 file changed, 29 insertions(+) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/imx7d-sdb.dts b/arch/arm/boot/dts/imx7d-sdb.dts index 5be01a1bf840..d6f2dda90710 100644 --- a/arch/arm/boot/dts/imx7d-sdb.dts +++ b/arch/arm/boot/dts/imx7d-sdb.dts @@ -52,6 +52,27 @@ reg = <0x80000000 0x80000000>; }; + spi4 { + compatible = "spi-gpio"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi4>; + gpio-sck = <&gpio1 13 GPIO_ACTIVE_HIGH>; + gpio-mosi = <&gpio1 9 GPIO_ACTIVE_HIGH>; + cs-gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>; + num-chipselects = <1>; + #address-cells = <1>; + #size-cells = <0>; + + extended_io: gpio-expander@0 { + compatible = "fairchild,74hc595"; + gpio-controller; + #gpio-cells = <2>; + reg = <0>; + registers-number = <1>; + spi-max-frequency = <100000>; + }; + }; + regulators { compatible = "simple-bus"; #address-cells = <1>; @@ -642,5 +663,13 @@ fsl,pins = < MX7D_PAD_LPSR_GPIO1_IO01__PWM1_OUT 0x110b0 >; + + pinctrl_spi4: spi4grp { + fsl,pins = < + MX7D_PAD_GPIO1_IO09__GPIO1_IO9 0x59 + MX7D_PAD_GPIO1_IO12__GPIO1_IO12 0x59 + MX7D_PAD_GPIO1_IO13__GPIO1_IO13 0x59 + >; + }; }; }; -- cgit v1.2.3 From a816d5750edf7151e079c4929c60e2531fc98fa6 Mon Sep 17 00:00:00 2001 From: Andrey Smirnov Date: Mon, 15 May 2017 07:53:04 -0700 Subject: ARM: dts: imx7d: Add node for PCIe controller Cc: yurovsky@gmail.com Cc: Dong Aisheng Cc: Sascha Hauer Cc: Fabio Estevam Cc: Rob Herring Cc: Mark Rutland Cc: Russell King Cc: devicetree@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Andrey Smirnov Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx7d.dtsi | 37 +++++++++++++++++++++++++++++++++++++ 1 file changed, 37 insertions(+) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/imx7d.dtsi b/arch/arm/boot/dts/imx7d.dtsi index f6dee41a05d9..f46814a7ea44 100644 --- a/arch/arm/boot/dts/imx7d.dtsi +++ b/arch/arm/boot/dts/imx7d.dtsi @@ -42,6 +42,7 @@ */ #include "imx7s.dtsi" +#include / { cpus { @@ -127,6 +128,42 @@ fsl,num-rx-queues=<3>; status = "disabled"; }; + + pcie: pcie@0x33800000 { + compatible = "fsl,imx7d-pcie", "snps,dw-pcie"; + reg = <0x33800000 0x4000>, + <0x4ff00000 0x80000>; + reg-names = "dbi", "config"; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + ranges = <0x81000000 0 0 0x4ff80000 0 0x00010000 /* downstream I/O */ + 0x82000000 0 0x40000000 0x40000000 0 0x0ff00000>; /* non-prefetchable memory */ + num-lanes = <1>; + interrupts = ; + interrupt-names = "msi"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 2 &intc GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 3 &intc GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 4 &intc GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_PCIE_CTRL_ROOT_CLK>, + <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>, + <&clks IMX7D_PCIE_PHY_ROOT_CLK>; + clock-names = "pcie", "pcie_bus", "pcie_phy"; + assigned-clocks = <&clks IMX7D_PCIE_CTRL_ROOT_SRC>, + <&clks IMX7D_PCIE_PHY_ROOT_SRC>; + assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_250M_CLK>, + <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>; + + fsl,max-link-speed = <2>; + power-domains = <&pgc_pcie_phy>; + resets = <&src IMX7_RESET_PCIEPHY>, + <&src IMX7_RESET_PCIE_CTRL_APPS_EN>; + reset-names = "pciephy", "apps"; + status = "disabled"; + }; }; &ca_funnel_ports { -- cgit v1.2.3 From 34adfaa3d404c0e763fa3614cfe01078e29c56c7 Mon Sep 17 00:00:00 2001 From: Andrey Smirnov Date: Mon, 15 May 2017 07:53:05 -0700 Subject: ARM: dts: imx7d-sdb: Enable PCIe peripheral Enable PCIe peripheral on this board. Cc: yurovsky@gmail.com Cc: Dong Aisheng Cc: Sascha Hauer Cc: Fabio Estevam Cc: Rob Herring Cc: Mark Rutland Cc: Russell King Cc: devicetree@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Andrey Smirnov Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx7d-sdb.dts | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/imx7d-sdb.dts b/arch/arm/boot/dts/imx7d-sdb.dts index d6f2dda90710..77c400f0017a 100644 --- a/arch/arm/boot/dts/imx7d-sdb.dts +++ b/arch/arm/boot/dts/imx7d-sdb.dts @@ -349,6 +349,11 @@ }; }; +&pcie { + reset-gpio = <&extended_io 1 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + &pwm1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm1>; -- cgit v1.2.3 From 9be48d2d98810ae723c229c05b078ca5a07e9561 Mon Sep 17 00:00:00 2001 From: Stefan Agner Date: Tue, 16 May 2017 00:40:13 -0700 Subject: ARM: dts: imx7: use 3 PWM cells The PWM driver has now capability to specify the PWM polarity which is e.g. for backlight control. Allow to make use of PWM polarity by specifying pwm-cells to be 3 in the base dt. Signed-off-by: Stefan Agner Reviewed-by: Fabio Estevam Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx7-colibri.dtsi | 2 +- arch/arm/boot/dts/imx7d-nitrogen7.dts | 2 +- arch/arm/boot/dts/imx7s.dtsi | 8 ++++---- 3 files changed, 6 insertions(+), 6 deletions(-) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/imx7-colibri.dtsi b/arch/arm/boot/dts/imx7-colibri.dtsi index 2d87489f9105..d7753f79937a 100644 --- a/arch/arm/boot/dts/imx7-colibri.dtsi +++ b/arch/arm/boot/dts/imx7-colibri.dtsi @@ -43,7 +43,7 @@ / { bl: backlight { compatible = "pwm-backlight"; - pwms = <&pwm1 0 5000000>; + pwms = <&pwm1 0 5000000 0>; }; reg_module_3v3: regulator-module-3v3 { diff --git a/arch/arm/boot/dts/imx7d-nitrogen7.dts b/arch/arm/boot/dts/imx7d-nitrogen7.dts index a44f992051ac..dd40e49f6c42 100644 --- a/arch/arm/boot/dts/imx7d-nitrogen7.dts +++ b/arch/arm/boot/dts/imx7d-nitrogen7.dts @@ -67,7 +67,7 @@ backlight-j20 { compatible = "pwm-backlight"; - pwms = <&pwm1 0 5000000>; + pwms = <&pwm1 0 5000000 0>; brightness-levels = <0 4 8 16 32 64 128 255>; default-brightness-level = <6>; status = "okay"; diff --git a/arch/arm/boot/dts/imx7s.dtsi b/arch/arm/boot/dts/imx7s.dtsi index aa1f4c3e915c..4cf6c458b583 100644 --- a/arch/arm/boot/dts/imx7s.dtsi +++ b/arch/arm/boot/dts/imx7s.dtsi @@ -635,7 +635,7 @@ clocks = <&clks IMX7D_PWM1_ROOT_CLK>, <&clks IMX7D_PWM1_ROOT_CLK>; clock-names = "ipg", "per"; - #pwm-cells = <2>; + #pwm-cells = <3>; status = "disabled"; }; @@ -646,7 +646,7 @@ clocks = <&clks IMX7D_PWM2_ROOT_CLK>, <&clks IMX7D_PWM2_ROOT_CLK>; clock-names = "ipg", "per"; - #pwm-cells = <2>; + #pwm-cells = <3>; status = "disabled"; }; @@ -657,7 +657,7 @@ clocks = <&clks IMX7D_PWM3_ROOT_CLK>, <&clks IMX7D_PWM3_ROOT_CLK>; clock-names = "ipg", "per"; - #pwm-cells = <2>; + #pwm-cells = <3>; status = "disabled"; }; @@ -668,7 +668,7 @@ clocks = <&clks IMX7D_PWM4_ROOT_CLK>, <&clks IMX7D_PWM4_ROOT_CLK>; clock-names = "ipg", "per"; - #pwm-cells = <2>; + #pwm-cells = <3>; status = "disabled"; }; -- cgit v1.2.3 From 23c787a99ff7b42f594722d60ea064534fe54a71 Mon Sep 17 00:00:00 2001 From: Vanessa Maegima Date: Wed, 17 May 2017 14:06:36 -0300 Subject: ARM: dts: imx7d-pico: Add initial support Add the initial support for imx7d-pico board. Add support for eMMC, USB host, USB device, PMIC, Ethernet and audio. For more information about this board, please visit: http://www.technexion.org/products/pico/pico-som/pico-imx7-emmc Signed-off-by: Vanessa Maegima Reviewed-by: Fabio Estevam Signed-off-by: Shawn Guo --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/imx7d-pico.dts | 387 +++++++++++++++++++++++++++++++++++++++ 2 files changed, 388 insertions(+) create mode 100644 arch/arm/boot/dts/imx7d-pico.dts (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 7881aaef2d58..cc1267098032 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -478,6 +478,7 @@ dtb-$(CONFIG_SOC_IMX7D) += \ imx7d-cl-som-imx7.dtb \ imx7d-colibri-eval-v3.dtb \ imx7d-nitrogen7.dtb \ + imx7d-pico.dtb \ imx7d-sbc-imx7.dtb \ imx7d-sdb.dtb \ imx7d-sdb-sht11.dtb \ diff --git a/arch/arm/boot/dts/imx7d-pico.dts b/arch/arm/boot/dts/imx7d-pico.dts new file mode 100644 index 000000000000..ebda3dffc270 --- /dev/null +++ b/arch/arm/boot/dts/imx7d-pico.dts @@ -0,0 +1,387 @@ +/* + * Copyright 2017 NXP + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; + +#include "imx7d.dtsi" + +/ { + model = "Technexion Pico i.MX7D Board"; + compatible = "technexion,imx7d-pico", "fsl,imx7d"; + + memory { + reg = <0x80000000 0x80000000>; + }; + + reg_2p5v: regulator-2p5v { + compatible = "regulator-fixed"; + regulator-name = "2P5V"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-always-on; + }; + + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_usb_otg1_vbus: regulator-usb-otg1-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb_otg1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio4 5 GPIO_ACTIVE_LOW>; + }; + + reg_usb_otg2_vbus: regulator-usb-otg2-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb_otg2_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + reg_vref_1v8: regulator-vref-1v8 { + compatible = "regulator-fixed"; + regulator-name = "vref-1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "imx7-sgtl5000"; + simple-audio-card,format = "i2s"; + simple-audio-card,bitclock-master = <&dailink_master>; + simple-audio-card,frame-master = <&dailink_master>; + simple-audio-card,cpu { + sound-dai = <&sai1>; + }; + + dailink_master: simple-audio-card,codec { + sound-dai = <&codec>; + clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>; + }; + }; +}; + +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet1>; + assigned-clocks = <&clks IMX7D_ENET1_TIME_ROOT_SRC>, + <&clks IMX7D_ENET1_TIME_ROOT_CLK>; + assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>; + assigned-clock-rates = <0>, <100000000>; + phy-mode = "rgmii"; + phy-handle = <ðphy0>; + fsl,magic-packet; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + status = "okay"; + }; + }; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + codec: sgtl5000@0a { + #sound-dai-cells = <0>; + reg = <0x0a>; + compatible = "fsl,sgtl5000"; + clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>; + VDDA-supply = <®_2p5v>; + VDDIO-supply = <®_vref_1v8>; + }; +}; + +&i2c4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c4>; + status = "okay"; + + pmic: pfuze3000@08 { + compatible = "fsl,pfuze3000"; + reg = <0x08>; + + regulators { + sw1a_reg: sw1a { + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <6250>; + }; + /* use sw1c_reg to align with pfuze100/pfuze200 */ + sw1c_reg: sw1b { + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1475000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <6250>; + }; + + sw2_reg: sw2 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1850000>; + regulator-boot-on; + regulator-always-on; + }; + + sw3a_reg: sw3 { + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1650000>; + regulator-boot-on; + regulator-always-on; + }; + + swbst_reg: swbst { + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5150000>; + }; + + snvs_reg: vsnvs { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <3000000>; + regulator-boot-on; + regulator-always-on; + }; + + vref_reg: vrefddr { + regulator-boot-on; + regulator-always-on; + }; + + vgen1_reg: vldo1 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen2_reg: vldo2 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + }; + + vgen3_reg: vccsd { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen4_reg: v33 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen5_reg: vldo3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen6_reg: vldo4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + }; + }; +}; + +&sai1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sai1>; + assigned-clocks = <&clks IMX7D_SAI1_ROOT_SRC>, + <&clks IMX7D_SAI1_ROOT_CLK>; + assigned-clock-parents = <&clks IMX7D_PLL_AUDIO_POST_DIV>; + assigned-clock-rates = <0>, <24576000>; + status = "okay"; +}; + +&uart5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart5>; + assigned-clocks = <&clks IMX7D_UART5_ROOT_SRC>; + assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>; + status = "okay"; +}; + +&usbotg1 { + vbus-supply = <®_usb_otg1_vbus>; + status = "okay"; +}; + +&usbotg2 { + vbus-supply = <®_usb_otg2_vbus>; + dr_mode = "host"; + status = "okay"; +}; + +&usdhc3 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc3>; + pinctrl-1 = <&pinctrl_usdhc3_100mhz>; + pinctrl-2 = <&pinctrl_usdhc3_200mhz>; + assigned-clocks = <&clks IMX7D_USDHC3_ROOT_CLK>; + assigned-clock-rates = <400000000>; + bus-width = <8>; + fsl,tuning-step = <2>; + non-removable; + status = "okay"; +}; + +&iomuxc { + pinctrl_enet1: enet1grp { + fsl,pins = < + MX7D_PAD_SD2_CD_B__ENET1_MDIO 0x3 + MX7D_PAD_SD2_WP__ENET1_MDC 0x3 + MX7D_PAD_ENET1_RGMII_TXC__ENET1_RGMII_TXC 0x1 + MX7D_PAD_ENET1_RGMII_TD0__ENET1_RGMII_TD0 0x1 + MX7D_PAD_ENET1_RGMII_TD1__ENET1_RGMII_TD1 0x1 + MX7D_PAD_ENET1_RGMII_TD2__ENET1_RGMII_TD2 0x1 + MX7D_PAD_ENET1_RGMII_TD3__ENET1_RGMII_TD3 0x1 + MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL 0x1 + MX7D_PAD_ENET1_RGMII_RXC__ENET1_RGMII_RXC 0x1 + MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0 0x1 + MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1 0x1 + MX7D_PAD_ENET1_RGMII_RD2__ENET1_RGMII_RD2 0x1 + MX7D_PAD_ENET1_RGMII_RD3__ENET1_RGMII_RD3 0x1 + MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL 0x1 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX7D_PAD_UART1_TX_DATA__I2C1_SDA 0x4000007f + MX7D_PAD_UART1_RX_DATA__I2C1_SCL 0x4000007f + >; + }; + + pinctrl_i2c4: i2c4grp { + fsl,pins = < + MX7D_PAD_SAI1_RX_BCLK__I2C4_SDA 0x4000007f + MX7D_PAD_SAI1_RX_SYNC__I2C4_SCL 0x4000007f + >; + }; + + pinctrl_sai1: sai1grp { + fsl,pins = < + MX7D_PAD_ENET1_RX_CLK__SAI1_TX_BCLK 0x1f + MX7D_PAD_ENET1_CRS__SAI1_TX_SYNC 0x1f + MX7D_PAD_ENET1_COL__SAI1_TX_DATA0 0x30 + MX7D_PAD_ENET1_TX_CLK__SAI1_RX_DATA0 0x1f + >; + }; + + pinctrl_uart5: uart5grp { + fsl,pins = < + MX7D_PAD_I2C4_SDA__UART5_DCE_TX 0x79 + MX7D_PAD_I2C4_SCL__UART5_DCE_RX 0x79 + >; + }; + + pinctrl_usbotg1_pwr: usbotg_pwr { + fsl,pins = < + MX7D_PAD_UART3_TX_DATA__GPIO4_IO5 0x14 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX7D_PAD_SD3_CMD__SD3_CMD 0x59 + MX7D_PAD_SD3_CLK__SD3_CLK 0x19 + MX7D_PAD_SD3_DATA0__SD3_DATA0 0x59 + MX7D_PAD_SD3_DATA1__SD3_DATA1 0x59 + MX7D_PAD_SD3_DATA2__SD3_DATA2 0x59 + MX7D_PAD_SD3_DATA3__SD3_DATA3 0x59 + MX7D_PAD_SD3_DATA4__SD3_DATA4 0x59 + MX7D_PAD_SD3_DATA5__SD3_DATA5 0x59 + MX7D_PAD_SD3_DATA6__SD3_DATA6 0x59 + MX7D_PAD_SD3_DATA7__SD3_DATA7 0x59 + >; + }; + + pinctrl_usdhc3_100mhz: usdhc3grp_100mhz { + fsl,pins = < + MX7D_PAD_SD3_CMD__SD3_CMD 0x5a + MX7D_PAD_SD3_CLK__SD3_CLK 0x1a + MX7D_PAD_SD3_DATA0__SD3_DATA0 0x5a + MX7D_PAD_SD3_DATA1__SD3_DATA1 0x5a + MX7D_PAD_SD3_DATA2__SD3_DATA2 0x5a + MX7D_PAD_SD3_DATA3__SD3_DATA3 0x5a + MX7D_PAD_SD3_DATA4__SD3_DATA4 0x5a + MX7D_PAD_SD3_DATA5__SD3_DATA5 0x5a + MX7D_PAD_SD3_DATA6__SD3_DATA6 0x5a + MX7D_PAD_SD3_DATA7__SD3_DATA7 0x5a + >; + }; + + pinctrl_usdhc3_200mhz: usdhc3grp_200mhz { + fsl,pins = < + MX7D_PAD_SD3_CMD__SD3_CMD 0x5b + MX7D_PAD_SD3_CLK__SD3_CLK 0x1b + MX7D_PAD_SD3_DATA0__SD3_DATA0 0x5b + MX7D_PAD_SD3_DATA1__SD3_DATA1 0x5b + MX7D_PAD_SD3_DATA2__SD3_DATA2 0x5b + MX7D_PAD_SD3_DATA3__SD3_DATA3 0x5b + MX7D_PAD_SD3_DATA4__SD3_DATA4 0x5b + MX7D_PAD_SD3_DATA5__SD3_DATA5 0x5b + MX7D_PAD_SD3_DATA6__SD3_DATA6 0x5b + MX7D_PAD_SD3_DATA7__SD3_DATA7 0x5b + >; + }; +}; -- cgit v1.2.3 From 60490d0a91ab97231d1cfea1f9327a03a596fa8f Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Wed, 17 May 2017 15:55:25 -0300 Subject: ARM: dts: imx7s-warp: Pass 'no-1-8-v' property to the eMMC Currently the following eMMC error is seen: mmc1: mmc_select_hs200 failed, error -74 mmc1: new MMC card at address 0001 mmcblk1: mmc1:0001 V10008 7.05 GiB mmcblk1boot0: mmc1:0001 V10008 partition 1 4.00 MiB mmcblk1boot1: mmc1:0001 V10008 partition 2 4.00 MiB mmcblk1rpmb: mmc1:0001 V10008 partition 3 4.00 MiB On imx7s-warp the eMMC VCCQ is fixed at 3.15V, so pass the 'no-1-8-v' property to properly describe that 1.8V operation is not possible. With this change HS200 error is gone and another benefit is that the card can operate in DDR52 mode now: mmc1: new DDR MMC card at address 0001 mmcblk1: mmc1:0001 V10008 7.05 GiB mmcblk1boot0: mmc1:0001 V10008 partition 1 4.00 MiB mmcblk1boot1: mmc1:0001 V10008 partition 2 4.00 MiB mmcblk1rpmb: mmc1:0001 V10008 partition 3 4.00 MiB Suggested-by: Stefan Agner Signed-off-by: Fabio Estevam Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx7s-warp.dts | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/imx7s-warp.dts b/arch/arm/boot/dts/imx7s-warp.dts index d5237fd0fa65..8dfed85471e1 100644 --- a/arch/arm/boot/dts/imx7s-warp.dts +++ b/arch/arm/boot/dts/imx7s-warp.dts @@ -295,6 +295,7 @@ assigned-clocks = <&clks IMX7D_USDHC3_ROOT_CLK>; assigned-clock-rates = <400000000>; bus-width = <8>; + no-1-8-v; fsl,tuning-step = <2>; non-removable; status = "okay"; -- cgit v1.2.3 From 2a8fbfa5823b80656a4302ea25990f630cccd463 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Sun, 21 May 2017 13:10:34 -0300 Subject: ARM: dts: imx6: Fix BCM43xx node name MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit "bcrmf" is a typo and "wifi" is the preferred form to describe such node, so change it accordingly. Reported-by: Andreas Färber Signed-off-by: Fabio Estevam Reviewed-by: Andreas Färber Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6sx-nitrogen6sx.dts | 2 +- arch/arm/boot/dts/imx6ul-opos6ul.dtsi | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts b/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts index 802da45aa551..ac1989e5d5ad 100644 --- a/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts +++ b/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts @@ -374,7 +374,7 @@ cap-sdio-irq; status = "okay"; - brcmf: bcrmf@1 { + brcmf: wifi@1 { reg = <1>; compatible = "brcm,bcm4329-fmac"; interrupt-parent = <&gpio7>; diff --git a/arch/arm/boot/dts/imx6ul-opos6ul.dtsi b/arch/arm/boot/dts/imx6ul-opos6ul.dtsi index 51095df33a90..aec5ccce0321 100644 --- a/arch/arm/boot/dts/imx6ul-opos6ul.dtsi +++ b/arch/arm/boot/dts/imx6ul-opos6ul.dtsi @@ -120,7 +120,7 @@ #address-cells = <1>; #size-cells = <0>; - brcmf: bcrmf@1 { + brcmf: wifi@1 { compatible = "brcm,bcm4329-fmac"; reg = <1>; interrupt-parent = <&gpio2>; -- cgit v1.2.3 From f402573fc010fe05fb901ccb6057c4872c392a56 Mon Sep 17 00:00:00 2001 From: Franklin S Cooper Jr Date: Sun, 21 May 2017 22:46:56 -0700 Subject: ARM: dts: keystone-k2g: Remove skeleton.dtsi Adding the unit address to the memory node was causing the below error: Warning (reg_format): "reg" property in /memory has invalid length (8 bytes) (#address-cells == 2, #size-cells == 2) Further debugging showed that this was due to the memory node added by default to skeleton.dtsi which was being included in keystone-k2g.dtsi. Adding a missing node was all that was needed to remove this deprecated dtsi file from the SoC dtsi. With skeleton.dtsi removed the dtc compiler no longer complained about including the unit address for the memory node. Signed-off-by: Franklin S Cooper Jr Signed-off-by: Santosh Shilimkar --- arch/arm/boot/dts/keystone-k2g.dtsi | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/keystone-k2g.dtsi b/arch/arm/boot/dts/keystone-k2g.dtsi index f59567fe7d91..a789f75a1ed5 100644 --- a/arch/arm/boot/dts/keystone-k2g.dtsi +++ b/arch/arm/boot/dts/keystone-k2g.dtsi @@ -15,7 +15,6 @@ #include #include -#include "skeleton.dtsi" / { compatible = "ti,k2g","ti,keystone"; @@ -24,6 +23,8 @@ #size-cells = <2>; interrupt-parent = <&gic>; + chosen { }; + aliases { serial0 = &uart0; }; -- cgit v1.2.3 From 99d20cf520731daac427e27bab71a6d98d3751c4 Mon Sep 17 00:00:00 2001 From: Franklin S Cooper Jr Date: Sun, 21 May 2017 22:46:56 -0700 Subject: ARM: dts: k2g-evm: Add unit address to memory node With the new Keystone 2 Industrial Communication EVM adding the unit address to the memory node it made sense to add it for this board also. Signed-off-by: Franklin S Cooper Jr Signed-off-by: Santosh Shilimkar --- arch/arm/boot/dts/keystone-k2g-evm.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/keystone-k2g-evm.dts b/arch/arm/boot/dts/keystone-k2g-evm.dts index 692fcbb1434a..61883cb969d2 100644 --- a/arch/arm/boot/dts/keystone-k2g-evm.dts +++ b/arch/arm/boot/dts/keystone-k2g-evm.dts @@ -20,7 +20,7 @@ compatible = "ti,k2g-evm", "ti,k2g", "ti,keystone"; model = "Texas Instruments K2G General Purpose EVM"; - memory { + memory@800000000 { device_type = "memory"; reg = <0x00000008 0x00000000 0x00000000 0x80000000>; }; -- cgit v1.2.3 From 84e00e244176baec37c66b1cbee6b8a2f7dbd76f Mon Sep 17 00:00:00 2001 From: Franklin S Cooper Jr Date: Sun, 21 May 2017 22:46:56 -0700 Subject: ARM: dts: keystone: Add minimum support for K2G ICE evm Add barebones dts support for TI's K2G Industrial Communication Engine evm. This dts allows the board to boot using a ram based filesystem. Signed-off-by: Franklin S Cooper Jr Signed-off-by: Santosh Shilimkar --- arch/arm/boot/dts/Makefile | 3 ++- arch/arm/boot/dts/keystone-k2g-ice.dts | 35 ++++++++++++++++++++++++++++++++++ 2 files changed, 37 insertions(+), 1 deletion(-) create mode 100644 arch/arm/boot/dts/keystone-k2g-ice.dts (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 9c5e1d944d1c..8db25d9e4399 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -204,7 +204,8 @@ dtb-$(CONFIG_ARCH_KEYSTONE) += \ keystone-k2hk-evm.dtb \ keystone-k2l-evm.dtb \ keystone-k2e-evm.dtb \ - keystone-k2g-evm.dtb + keystone-k2g-evm.dtb \ + keystone-k2g-ice.dtb dtb-$(CONFIG_MACH_KIRKWOOD) += \ kirkwood-b3.dtb \ kirkwood-blackarmor-nas220.dtb \ diff --git a/arch/arm/boot/dts/keystone-k2g-ice.dts b/arch/arm/boot/dts/keystone-k2g-ice.dts new file mode 100644 index 000000000000..d820d37b5148 --- /dev/null +++ b/arch/arm/boot/dts/keystone-k2g-ice.dts @@ -0,0 +1,35 @@ +/* + * Device Tree Source for K2G Industrial Communication Engine EVM + * + * Copyright (C) 2017 Texas Instruments Incorporated - http://www.ti.com/ + * + * SPDX-License-Identifier: GPL-2.0 + */ +/dts-v1/; + +#include "keystone-k2g.dtsi" + +/ { + compatible = "ti,k2g-ice", "ti,k2g", "ti,keystone"; + model = "Texas Instruments K2G Industrial Communication EVM"; + + memory@800000000 { + device_type = "memory"; + reg = <0x00000008 0x00000000 0x00000000 0x20000000>; + }; +}; + +&k2g_pinctrl { + uart0_pins: pinmux_uart0_pins { + pinctrl-single,pins = < + K2G_CORE_IOPAD(0x11cc) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* uart0_rxd.uart0_rxd */ + K2G_CORE_IOPAD(0x11d0) (BUFFER_CLASS_B | PIN_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */ + >; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins>; + status = "okay"; +}; -- cgit v1.2.3 From e5b558a5b2296009574f9237185f4e139f4b50f9 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Sun, 21 May 2017 18:16:55 -0300 Subject: ARM: dts: sunxi: Fix BCM43xx node name MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit "bcrmf" is a typo and "wifi" is the preferred form to describe such node, so change it accordingly. Reported-by: Andreas Färber Reviewed-by: Chen-Yu Tsai Signed-off-by: Fabio Estevam Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts | 2 +- arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts | 2 +- arch/arm/boot/dts/sun7i-a20-bananapro.dts | 2 +- arch/arm/boot/dts/sun7i-a20-cubietruck.dts | 2 +- arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts | 2 +- arch/arm/boot/dts/sun7i-a20-wits-pro-a20-dkt.dts | 2 +- arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts | 2 +- 7 files changed, 7 insertions(+), 7 deletions(-) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts b/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts index bdfdce8ca6ba..51e6f1d21c32 100644 --- a/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts +++ b/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts @@ -138,7 +138,7 @@ non-removable; status = "okay"; - brcmf: bcrmf@1 { + brcmf: wifi@1 { reg = <1>; compatible = "brcm,bcm4329-fmac"; interrupt-parent = <&r_pio>; diff --git a/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts b/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts index 08e776ae095a..4c03cc3fd7b3 100644 --- a/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts +++ b/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts @@ -172,7 +172,7 @@ wakeup-source; status = "okay"; - brcmf: bcrmf@1 { + brcmf: wifi@1 { reg = <1>; compatible = "brcm,bcm4329-fmac"; interrupt-parent = <&pio>; diff --git a/arch/arm/boot/dts/sun7i-a20-bananapro.dts b/arch/arm/boot/dts/sun7i-a20-bananapro.dts index 83516bc81225..e7af1b7c33d5 100644 --- a/arch/arm/boot/dts/sun7i-a20-bananapro.dts +++ b/arch/arm/boot/dts/sun7i-a20-bananapro.dts @@ -172,7 +172,7 @@ non-removable; status = "okay"; - brcmf: bcrmf@1 { + brcmf: wifi@1 { reg = <1>; compatible = "brcm,bcm4329-fmac"; interrupt-parent = <&pio>; diff --git a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts index 4ebeecf9c3d7..8dbf732c7aa9 100644 --- a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts +++ b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts @@ -195,7 +195,7 @@ non-removable; status = "okay"; - brcmf: bcrmf@1 { + brcmf: wifi@1 { reg = <1>; compatible = "brcm,bcm4329-fmac"; interrupt-parent = <&pio>; diff --git a/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts b/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts index e5cbcad3a556..55809973a568 100644 --- a/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts +++ b/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts @@ -173,7 +173,7 @@ non-removable; status = "okay"; - brcmf: bcrmf@1 { + brcmf: wifi@1 { reg = <1>; compatible = "brcm,bcm4329-fmac"; interrupt-parent = <&pio>; diff --git a/arch/arm/boot/dts/sun7i-a20-wits-pro-a20-dkt.dts b/arch/arm/boot/dts/sun7i-a20-wits-pro-a20-dkt.dts index 84462d7961f5..7f8405a0dd0f 100644 --- a/arch/arm/boot/dts/sun7i-a20-wits-pro-a20-dkt.dts +++ b/arch/arm/boot/dts/sun7i-a20-wits-pro-a20-dkt.dts @@ -137,7 +137,7 @@ non-removable; status = "okay"; - brcmf: bcrmf@1 { + brcmf: wifi@1 { reg = <1>; compatible = "brcm,bcm4329-fmac"; interrupt-parent = <&pio>; diff --git a/arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts b/arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts index 17c7c088cdea..883072b611fa 100644 --- a/arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts +++ b/arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts @@ -130,7 +130,7 @@ non-removable; status = "okay"; - brcmf: bcrmf@1 { + brcmf: wifi@1 { reg = <1>; compatible = "brcm,bcm4329-fmac"; interrupt-parent = <&pio>; -- cgit v1.2.3 From 749b7a9775a63bc8b87bbbe185d849df4c39158d Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Mon, 22 May 2017 14:25:50 +0800 Subject: ARM: sun8i: a83t: Add device node for DMA controller The A83T SoC has a DMA controller that supports 8 DMA channels to and from various peripherals. Add a device node for it. Signed-off-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun8i-a83t.dtsi | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/sun8i-a83t.dtsi b/arch/arm/boot/dts/sun8i-a83t.dtsi index e12dd7170b8f..47196feda26b 100644 --- a/arch/arm/boot/dts/sun8i-a83t.dtsi +++ b/arch/arm/boot/dts/sun8i-a83t.dtsi @@ -163,6 +163,15 @@ #size-cells = <1>; ranges; + dma: dma-controller@1c02000 { + compatible = "allwinner,sun8i-a83t-dma"; + reg = <0x01c02000 0x1000>; + interrupts = ; + clocks = <&ccu 21>; + resets = <&ccu 7>; + #dma-cells = <1>; + }; + ccu: clock@1c20000 { compatible = "allwinner,sun8i-a83t-ccu"; reg = <0x01c20000 0x400>; -- cgit v1.2.3 From 9ecf12302cd2baaba2dfedc0173978ab37416866 Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Mon, 22 May 2017 14:25:51 +0800 Subject: ARM: sun8i: a83t: Add device node for SPDIF transmitter The A83T SoC has an SPDIF transmitter block. According to the vendor BSP kernel, it is compatible with the one found on the H3 SoC. Add a device node and pinmux setting for it. Signed-off-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun8i-a83t.dtsi | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/sun8i-a83t.dtsi b/arch/arm/boot/dts/sun8i-a83t.dtsi index 47196feda26b..1dc4cfe81534 100644 --- a/arch/arm/boot/dts/sun8i-a83t.dtsi +++ b/arch/arm/boot/dts/sun8i-a83t.dtsi @@ -202,6 +202,11 @@ bias-pull-up; }; + spdif_tx_pin: spdif-tx-pin { + pins = "PE18"; + function = "spdif"; + }; + uart0_pb_pins: uart0-pb-pins { pins = "PB9", "PB10"; function = "uart0"; @@ -228,6 +233,22 @@ clocks = <&osc24M>; }; + spdif: spdif@1c21000 { + #sound-dai-cells = <0>; + compatible = "allwinner,sun8i-a83t-spdif", + "allwinner,sun8i-h3-spdif"; + reg = <0x01c21000 0x400>; + interrupts = ; + clocks = <&ccu 44>, <&ccu 76>; + resets = <&ccu 32>; + clock-names = "apb", "spdif"; + dmas = <&dma 2>; + dma-names = "tx"; + pinctrl-names = "default"; + pinctrl-0 = <&spdif_tx_pin>; + status = "disabled"; + }; + uart0: serial@01c28000 { compatible = "snps,dw-apb-uart"; reg = <0x01c28000 0x400>; -- cgit v1.2.3 From 54f3b7f051d6467b8eaccaf0abee4669785a1b31 Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Mon, 22 May 2017 12:03:34 +0800 Subject: ARM: sun8i: a83t: cubietruck-plus: Add LED device nodes The Cubietruck Plus has 4 LEDs in different colors. Add device nodes for them. Signed-off-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts | 26 ++++++++++++++++++++++++ 1 file changed, 26 insertions(+) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts b/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts index d2614f101ecc..9e10cc6f39d4 100644 --- a/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts +++ b/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts @@ -45,6 +45,8 @@ /dts-v1/; #include "sun8i-a83t.dtsi" +#include + / { model = "Cubietech Cubietruck Plus"; compatible = "cubietech,cubietruck-plus", "allwinner,sun8i-a83t"; @@ -56,6 +58,30 @@ chosen { stdout-path = "serial0:115200n8"; }; + + leds { + compatible = "gpio-leds"; + + blue { + label = "cubietruck-plus:blue:usr"; + gpios = <&pio 3 25 GPIO_ACTIVE_HIGH>; /* PD25 */ + }; + + orange { + label = "cubietruck-plus:orange:usr"; + gpios = <&pio 3 26 GPIO_ACTIVE_HIGH>; /* PD26 */ + }; + + white { + label = "cubietruck-plus:white:usr"; + gpios = <&pio 3 27 GPIO_ACTIVE_HIGH>; /* PD27 */ + }; + + green { + label = "cubietruck-plus:green:usr"; + gpios = <&pio 4 4 GPIO_ACTIVE_HIGH>; /* PE4 */ + }; + }; }; &uart0 { -- cgit v1.2.3 From beea147ecdc3bcf3d6cf6006a65e00cc29c27f73 Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Mon, 22 May 2017 14:25:52 +0800 Subject: ARM: sun8i: a83t: cubietruck-plus: Enable SPDIF output The Cubietruck Plus has an optical SPDIF out connector. Enable SPDIF audio output for this board. Signed-off-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts b/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts index 9e10cc6f39d4..cff33454fc24 100644 --- a/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts +++ b/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts @@ -82,6 +82,28 @@ gpios = <&pio 4 4 GPIO_ACTIVE_HIGH>; /* PE4 */ }; }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "On-board SPDIF"; + + simple-audio-card,cpu { + sound-dai = <&spdif>; + }; + + simple-audio-card,codec { + sound-dai = <&spdif_out>; + }; + }; + + spdif_out: spdif-out { + #sound-dai-cells = <0>; + compatible = "linux,spdif-dit"; + }; +}; + +&spdif { + status = "okay"; }; &uart0 { -- cgit v1.2.3 From 3863c5289920c7ac0df56830aeee0c1b7566f35d Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Thu, 13 Apr 2017 16:09:53 +0200 Subject: ARM: dts: Add the Gemini reset controller This adds the Gemini reset controller to the Gemini SoC DTSI file and also adds the reset references to all existing blocks already in the device tree. Signed-off-by: Linus Walleij --- arch/arm/boot/dts/gemini.dtsi | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/gemini.dtsi b/arch/arm/boot/dts/gemini.dtsi index b8d011bdcc76..dadc8412243e 100644 --- a/arch/arm/boot/dts/gemini.dtsi +++ b/arch/arm/boot/dts/gemini.dtsi @@ -25,8 +25,10 @@ }; syscon: syscon@40000000 { - compatible = "cortina,gemini-syscon", "syscon", "simple-mfd"; + compatible = "cortina,gemini-syscon", + "syscon", "simple-mfd"; reg = <0x40000000 0x1000>; + #reset-cells = <1>; syscon-reboot { compatible = "syscon-reboot"; @@ -42,11 +44,13 @@ compatible = "cortina,gemini-watchdog"; reg = <0x41000000 0x1000>; interrupts = <3 IRQ_TYPE_LEVEL_HIGH>; + resets = <&syscon 23>; }; uart0: serial@42000000 { compatible = "ns16550a"; reg = <0x42000000 0x100>; + resets = <&syscon 18>; clock-frequency = <48000000>; interrupts = <18 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; @@ -59,6 +63,7 @@ interrupts = <14 IRQ_TYPE_EDGE_FALLING>, /* Timer 1 */ <15 IRQ_TYPE_EDGE_FALLING>, /* Timer 2 */ <16 IRQ_TYPE_EDGE_FALLING>; /* Timer 3 */ + resets = <&syscon 17>; syscon = <&syscon>; }; @@ -66,11 +71,13 @@ compatible = "cortina,gemini-rtc"; reg = <0x45000000 0x100>; interrupts = <17 IRQ_TYPE_LEVEL_HIGH>; + resets = <&syscon 16>; }; intcon: interrupt-controller@48000000 { compatible = "faraday,ftintc010"; reg = <0x48000000 0x1000>; + resets = <&syscon 14>; interrupt-controller; #interrupt-cells = <2>; }; @@ -85,6 +92,7 @@ compatible = "cortina,gemini-gpio", "faraday,ftgpio010"; reg = <0x4d000000 0x100>; interrupts = <22 IRQ_TYPE_LEVEL_HIGH>; + resets = <&syscon 20>; gpio-controller; #gpio-cells = <2>; interrupt-controller; @@ -95,6 +103,7 @@ compatible = "cortina,gemini-gpio", "faraday,ftgpio010"; reg = <0x4e000000 0x100>; interrupts = <23 IRQ_TYPE_LEVEL_HIGH>; + resets = <&syscon 21>; gpio-controller; #gpio-cells = <2>; interrupt-controller; @@ -105,6 +114,7 @@ compatible = "cortina,gemini-gpio", "faraday,ftgpio010"; reg = <0x4f000000 0x100>; interrupts = <24 IRQ_TYPE_LEVEL_HIGH>; + resets = <&syscon 22>; gpio-controller; #gpio-cells = <2>; interrupt-controller; @@ -118,6 +128,7 @@ * to configure the host bridge. */ reg = <0x50000000 0x100>; + resets = <&syscon 7>; #address-cells = <3>; #size-cells = <2>; #interrupt-cells = <1>; -- cgit v1.2.3 From 664ed4e283926d753e876a1347b7729135a3f6b8 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Thu, 20 Apr 2017 21:43:38 +0200 Subject: ARM: dts: Add clocks to the Gemini SoC We have a clock controller for the Gemini SoC, so make use of the driver and add clocks to the peripherals. Remove the hard-coded frequency from the UART and add switch the timer compatible to the generic that uses the clock framework for clock speed look-up. Signed-off-by: Linus Walleij --- arch/arm/boot/dts/gemini.dtsi | 16 ++++++++++++++-- 1 file changed, 14 insertions(+), 2 deletions(-) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/gemini.dtsi b/arch/arm/boot/dts/gemini.dtsi index dadc8412243e..80abf84f8a80 100644 --- a/arch/arm/boot/dts/gemini.dtsi +++ b/arch/arm/boot/dts/gemini.dtsi @@ -28,6 +28,7 @@ compatible = "cortina,gemini-syscon", "syscon", "simple-mfd"; reg = <0x40000000 0x1000>; + #clock-cells = <1>; #reset-cells = <1>; syscon-reboot { @@ -45,25 +46,29 @@ reg = <0x41000000 0x1000>; interrupts = <3 IRQ_TYPE_LEVEL_HIGH>; resets = <&syscon 23>; + clocks = <&syscon 2>; }; uart0: serial@42000000 { compatible = "ns16550a"; reg = <0x42000000 0x100>; resets = <&syscon 18>; - clock-frequency = <48000000>; + clocks = <&syscon 6>; interrupts = <18 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; }; timer@43000000 { - compatible = "cortina,gemini-timer"; + compatible = "faraday,fttmr010"; reg = <0x43000000 0x1000>; interrupt-parent = <&intcon>; interrupts = <14 IRQ_TYPE_EDGE_FALLING>, /* Timer 1 */ <15 IRQ_TYPE_EDGE_FALLING>, /* Timer 2 */ <16 IRQ_TYPE_EDGE_FALLING>; /* Timer 3 */ resets = <&syscon 17>; + /* APB clock or RTC clock */ + clocks = <&syscon 2>, <&syscon 0>; + clock-names = "PCLK", "EXTCLK"; syscon = <&syscon>; }; @@ -72,6 +77,8 @@ reg = <0x45000000 0x100>; interrupts = <17 IRQ_TYPE_LEVEL_HIGH>; resets = <&syscon 16>; + clocks = <&syscon 2>, <&syscon 0>; + clock-names = "PCLK", "EXTCLK"; }; intcon: interrupt-controller@48000000 { @@ -93,6 +100,7 @@ reg = <0x4d000000 0x100>; interrupts = <22 IRQ_TYPE_LEVEL_HIGH>; resets = <&syscon 20>; + clocks = <&syscon 2>; gpio-controller; #gpio-cells = <2>; interrupt-controller; @@ -104,6 +112,7 @@ reg = <0x4e000000 0x100>; interrupts = <23 IRQ_TYPE_LEVEL_HIGH>; resets = <&syscon 21>; + clocks = <&syscon 2>; gpio-controller; #gpio-cells = <2>; interrupt-controller; @@ -115,6 +124,7 @@ reg = <0x4f000000 0x100>; interrupts = <24 IRQ_TYPE_LEVEL_HIGH>; resets = <&syscon 22>; + clocks = <&syscon 2>; gpio-controller; #gpio-cells = <2>; interrupt-controller; @@ -129,6 +139,8 @@ */ reg = <0x50000000 0x100>; resets = <&syscon 7>; + clocks = <&syscon 15>, <&syscon 4>; + clock-names = "PCLK", "PCICLK"; #address-cells = <3>; #size-cells = <2>; #interrupt-cells = <1>; -- cgit v1.2.3 From bed8c926d17529c7c0ae14a509db1957d7710c8b Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Wed, 24 May 2017 14:02:42 +0900 Subject: ARM: dts: imx6: use #include "..." to include local DT Most of DT files in ARM use #include "..." to make pre-processor include DT in the same directory, but we have some exceptional files that use #include <...> for that. Fix them to remove -I$(srctree)/arch/$(SRCARCH)/boot/dts path from dtc_cpp_flags. Signed-off-by: Masahiro Yamada Reviewed-by: Fabio Estevam Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6q-zii-rdu2.dts | 4 ++-- arch/arm/boot/dts/imx6qp-zii-rdu2.dts | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/imx6q-zii-rdu2.dts b/arch/arm/boot/dts/imx6q-zii-rdu2.dts index b2d346640fd7..6be8a1eea895 100644 --- a/arch/arm/boot/dts/imx6q-zii-rdu2.dts +++ b/arch/arm/boot/dts/imx6q-zii-rdu2.dts @@ -41,8 +41,8 @@ /dts-v1/; -#include -#include +#include "imx6q.dtsi" +#include "imx6qdl-zii-rdu2.dtsi" / { model = "ZII RDU2 Board"; diff --git a/arch/arm/boot/dts/imx6qp-zii-rdu2.dts b/arch/arm/boot/dts/imx6qp-zii-rdu2.dts index 882b3bd97e07..547a76677ab3 100644 --- a/arch/arm/boot/dts/imx6qp-zii-rdu2.dts +++ b/arch/arm/boot/dts/imx6qp-zii-rdu2.dts @@ -41,8 +41,8 @@ /dts-v1/; -#include -#include +#include "imx6qp.dtsi" +#include "imx6qdl-zii-rdu2.dtsi" / { model = "ZII RDU2+ Board"; -- cgit v1.2.3 From 30dd9fb924efccfa080e5cba9cd6c2e1ebbd1822 Mon Sep 17 00:00:00 2001 From: Javier Martinez Canillas Date: Tue, 23 May 2017 15:34:34 +0200 Subject: ARM: dts: imx: Add generic compatible string for I2C EEPROM The at24 driver allows to register I2C EEPROM chips using different vendor and devices, but the I2C subsystem does not take the vendor into account when matching using the I2C table since it only has device entries. But when matching using an OF table, both the vendor and device has to be taken into account so the driver defines only a set of compatible strings using the "atmel" vendor as a generic fallback for compatible I2C devices. So add this generic fallback to the device node compatible string to make the device to match the driver using the OF device ID table. Signed-off-by: Javier Martinez Canillas Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx27-phytec-phycard-s-som.dtsi | 2 +- arch/arm/boot/dts/imx27-phytec-phycore-som.dtsi | 2 +- arch/arm/boot/dts/imx28-evk.dts | 2 +- arch/arm/boot/dts/imx53-tqma53.dtsi | 2 +- arch/arm/boot/dts/imx6q-cm-fx6.dts | 2 +- arch/arm/boot/dts/imx6q-utilite-pro.dts | 2 +- 6 files changed, 6 insertions(+), 6 deletions(-) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/imx27-phytec-phycard-s-som.dtsi b/arch/arm/boot/dts/imx27-phytec-phycard-s-som.dtsi index 4f3e0f473581..0b8490b21a38 100644 --- a/arch/arm/boot/dts/imx27-phytec-phycard-s-som.dtsi +++ b/arch/arm/boot/dts/imx27-phytec-phycard-s-som.dtsi @@ -40,7 +40,7 @@ status = "okay"; at24@52 { - compatible = "at,24c32"; + compatible = "atmel,24c32"; pagesize = <32>; reg = <0x52>; }; diff --git a/arch/arm/boot/dts/imx27-phytec-phycore-som.dtsi b/arch/arm/boot/dts/imx27-phytec-phycore-som.dtsi index 82fec935ce83..c973c5d91875 100644 --- a/arch/arm/boot/dts/imx27-phytec-phycore-som.dtsi +++ b/arch/arm/boot/dts/imx27-phytec-phycore-som.dtsi @@ -193,7 +193,7 @@ status = "okay"; at24@52 { - compatible = "at,24c32"; + compatible = "atmel,24c32"; pagesize = <32>; reg = <0x52>; }; diff --git a/arch/arm/boot/dts/imx28-evk.dts b/arch/arm/boot/dts/imx28-evk.dts index a5ba669b4eaa..b88c087f1fea 100644 --- a/arch/arm/boot/dts/imx28-evk.dts +++ b/arch/arm/boot/dts/imx28-evk.dts @@ -203,7 +203,7 @@ }; at24@51 { - compatible = "at24,24c32"; + compatible = "atmel,24c32"; pagesize = <32>; reg = <0x51>; }; diff --git a/arch/arm/boot/dts/imx53-tqma53.dtsi b/arch/arm/boot/dts/imx53-tqma53.dtsi index 85972f2201c2..eecdc1c55eef 100644 --- a/arch/arm/boot/dts/imx53-tqma53.dtsi +++ b/arch/arm/boot/dts/imx53-tqma53.dtsi @@ -272,7 +272,7 @@ }; eeprom: 24c64@50 { - compatible = "at,24c64"; + compatible = "atmel,24c64"; pagesize = <32>; reg = <0x50>; }; diff --git a/arch/arm/boot/dts/imx6q-cm-fx6.dts b/arch/arm/boot/dts/imx6q-cm-fx6.dts index 66cac5328b86..a8af3822d9df 100644 --- a/arch/arm/boot/dts/imx6q-cm-fx6.dts +++ b/arch/arm/boot/dts/imx6q-cm-fx6.dts @@ -215,7 +215,7 @@ clock-frequency = <100000>; eeprom@50 { - compatible = "at24,24c02"; + compatible = "atmel,24c02"; reg = <0x50>; pagesize = <16>; }; diff --git a/arch/arm/boot/dts/imx6q-utilite-pro.dts b/arch/arm/boot/dts/imx6q-utilite-pro.dts index d900ad6ec5f8..16d5be1aeb3c 100644 --- a/arch/arm/boot/dts/imx6q-utilite-pro.dts +++ b/arch/arm/boot/dts/imx6q-utilite-pro.dts @@ -130,7 +130,7 @@ #size-cells = <0>; eeprom@50 { - compatible = "at24,24c02"; + compatible = "atmel,24c02"; reg = <0x50>; pagesize = <16>; }; -- cgit v1.2.3 From d1ceec2a8f6ab1b35c296c3339127adca1ace30b Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Tue, 23 May 2017 12:16:08 -0300 Subject: ARM: dts: imx7d-pico: Add watchdog support imx7d-pico has the WDOG1_B pin connected to the PMIC, so add the wdog1 node and use the 'fsl,ext-reset-output' property to properly describe it. Signed-off-by: Fabio Estevam Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx7d-pico.dts | 15 +++++++++++++++ 1 file changed, 15 insertions(+) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/imx7d-pico.dts b/arch/arm/boot/dts/imx7d-pico.dts index ebda3dffc270..f874352bb496 100644 --- a/arch/arm/boot/dts/imx7d-pico.dts +++ b/arch/arm/boot/dts/imx7d-pico.dts @@ -284,6 +284,13 @@ status = "okay"; }; +&wdog1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog>; + fsl,ext-reset-output; + status = "okay"; +}; + &iomuxc { pinctrl_enet1: enet1grp { fsl,pins = < @@ -385,3 +392,11 @@ >; }; }; + +&iomuxc_lpsr { + pinctrl_wdog: wdoggrp { + fsl,pins = < + MX7D_PAD_LPSR_GPIO1_IO00__WDOD1_WDOG_B 0x74 + >; + }; +}; -- cgit v1.2.3 From bdc111bd50cc1378e113647dc251689636986d84 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Tue, 23 May 2017 12:16:09 -0300 Subject: ARM: dts: imx7d-pico: Pass 'no-1-8-v' property to the eMMC Currently the following eMMC error is seen: mmc1: mmc_select_hs200 failed, error -74 On imx7d-pico the eMMC VCCQ is fixed at 3.15V, so pass the 'no-1-8-v' property to properly describe that 1.8V operation is not possible. Signed-off-by: Fabio Estevam Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx7d-pico.dts | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/imx7d-pico.dts b/arch/arm/boot/dts/imx7d-pico.dts index f874352bb496..79b5d83aaace 100644 --- a/arch/arm/boot/dts/imx7d-pico.dts +++ b/arch/arm/boot/dts/imx7d-pico.dts @@ -279,6 +279,7 @@ assigned-clocks = <&clks IMX7D_USDHC3_ROOT_CLK>; assigned-clock-rates = <400000000>; bus-width = <8>; + no-1-8-v; fsl,tuning-step = <2>; non-removable; status = "okay"; -- cgit v1.2.3 From 71ba49902d35d025b3810d6f19028eff624c67a7 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Tue, 23 May 2017 12:32:43 -0300 Subject: ARM: dts: imx23-sansa: Remove 'enable-active-low' property Property 'enable-active-low' does not exist. Only 'enable-active-high' is valid, and when this property is absent the gpio regulator will act as active low by default. So remove the unexisting 'enable-active-low' property. Currently the GPIO flag is 0, which means active-high. In order to make the dts description accurate, pass the GPIO_ACTIVE_LOW flag instead. This change is safe because the gpio regulator driver does not take the GPIO flag polarity into account. Signed-off-by: Fabio Estevam Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx23-sansa.dts | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/imx23-sansa.dts b/arch/arm/boot/dts/imx23-sansa.dts index 4ec32f4c7885..221fd55e967e 100644 --- a/arch/arm/boot/dts/imx23-sansa.dts +++ b/arch/arm/boot/dts/imx23-sansa.dts @@ -42,6 +42,7 @@ */ /dts-v1/; +#include #include "imx23.dtsi" / { @@ -149,9 +150,8 @@ regulator-name = "vdd-touchpad0"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - gpio = <&gpio0 26 0>; + gpio = <&gpio0 26 GPIO_ACTIVE_LOW>; regulator-always-on; - enable-active-low; }; reg_vdd_tuner: regulator-vdd-tuner0 { @@ -159,9 +159,8 @@ regulator-name = "vdd-tuner0"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - gpio = <&gpio0 29 0>; + gpio = <&gpio0 29 GPIO_ACTIVE_LOW>; regulator-always-on; - enable-active-low; }; backlight { -- cgit v1.2.3 From 8b7be72b1fe93fe78f325312a9ece12b9531efeb Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Tue, 23 May 2017 12:32:44 -0300 Subject: ARM: dts: tx6: Remove 'enable-active-low' property MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Property 'enable-active-low' does not exist. Only 'enable-active-high' is valid, and when this property is absent the gpio regulator will act as active low by default. So remove the unexisting 'enable-active-low' property. Currently the GPIO flag is GPIO_ACTIVE_HIGH. In order to make the dts description accurate, pass the GPIO_ACTIVE_LOW flag instead. This change is safe because the gpio regulator driver does not take the GPIO flag polarity into account. Signed-off-by: Fabio Estevam Acked-by: Lothar Waßmann Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6qdl-tx6.dtsi | 3 +-- arch/arm/boot/dts/imx6ul-tx6ul.dtsi | 3 +-- 2 files changed, 2 insertions(+), 4 deletions(-) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/imx6qdl-tx6.dtsi b/arch/arm/boot/dts/imx6qdl-tx6.dtsi index 1691714f13a2..a146fe7fdc5a 100644 --- a/arch/arm/boot/dts/imx6qdl-tx6.dtsi +++ b/arch/arm/boot/dts/imx6qdl-tx6.dtsi @@ -133,8 +133,7 @@ regulator-max-microvolt = <3300000>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_flexcan_xcvr>; - gpio = <&gpio4 21 GPIO_ACTIVE_HIGH>; - enable-active-low; + gpio = <&gpio4 21 GPIO_ACTIVE_LOW>; }; reg_lcd0_pwr: regulator-lcd0-pwr { diff --git a/arch/arm/boot/dts/imx6ul-tx6ul.dtsi b/arch/arm/boot/dts/imx6ul-tx6ul.dtsi index c784a0b75ca0..4ccc9e9d2c29 100644 --- a/arch/arm/boot/dts/imx6ul-tx6ul.dtsi +++ b/arch/arm/boot/dts/imx6ul-tx6ul.dtsi @@ -173,8 +173,7 @@ regulator-max-microvolt = <3300000>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_flexcan_xcvr>; - gpio = <&gpio3 5 GPIO_ACTIVE_HIGH>; - enable-active-low; + gpio = <&gpio3 5 GPIO_ACTIVE_LOW>; }; reg_lcd_pwr: regulator-lcdpwr { -- cgit v1.2.3 From 939fa844a0ee02058ee743981c9e2d350f699dd1 Mon Sep 17 00:00:00 2001 From: Stephen Boyd Date: Thu, 26 Jan 2017 16:47:24 -0800 Subject: ARM: dts: qcom: Remove s4/5vs1,2 from RPM pm8941 control These regulators are controlled by the SPMI regulator driver instead of the RPM regulator driver in the downstream android kernel sources. Let's remove them from the DTS here because they'll never be used by the RPM regulator driver. Cc: Bjorn Andersson Signed-off-by: Stephen Boyd Signed-off-by: Andy Gross --- arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts | 1 - arch/arm/boot/dts/qcom-msm8974.dtsi | 4 ---- 2 files changed, 5 deletions(-) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts index e7c1577d56f4..50966378f9e4 100644 --- a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts +++ b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts @@ -92,7 +92,6 @@ vdd_l9_l10_l17_l22-supply = <&vreg_boost>; vdd_l13_l20_l23_l24-supply = <&vreg_boost>; vdd_l21-supply = <&vreg_boost>; - vin_5vs-supply = <&pm8941_5v>; s1 { regulator-min-microvolt = <1300000>; diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi index 307bf6a647b3..0b2014fab4ea 100644 --- a/arch/arm/boot/dts/qcom-msm8974.dtsi +++ b/arch/arm/boot/dts/qcom-msm8974.dtsi @@ -1021,7 +1021,6 @@ pm8941_s1: s1 {}; pm8941_s2: s2 {}; pm8941_s3: s3 {}; - pm8941_5v: s4 {}; pm8941_l1: l1 {}; pm8941_l2: l2 {}; @@ -1051,9 +1050,6 @@ pm8941_lvs1: lvs1 {}; pm8941_lvs2: lvs2 {}; pm8941_lvs3: lvs3 {}; - - pm8941_5vs1: 5vs1 {}; - pm8941_5vs2: 5vs2 {}; }; }; }; -- cgit v1.2.3 From ffb35d431b7666544994ecef0ef8b2227c20b6da Mon Sep 17 00:00:00 2001 From: "Bird, Tim" Date: Thu, 26 Jan 2017 16:47:25 -0800 Subject: ARM: dts: qcom: add charger otg regulator Add the otg regulator provided by the charger block. Signed-off-by: Tim Bird Reviewed-by: Bjorn Andersson [stephen.boyd@linaro.org: Fix otg supply property name] Signed-off-by: Stephen Boyd Signed-off-by: Andy Gross --- arch/arm/boot/dts/qcom-pm8941.dtsi | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/qcom-pm8941.dtsi b/arch/arm/boot/dts/qcom-pm8941.dtsi index f8eb5e31c920..6b16b296f0fa 100644 --- a/arch/arm/boot/dts/qcom-pm8941.dtsi +++ b/arch/arm/boot/dts/qcom-pm8941.dtsi @@ -45,6 +45,10 @@ "chg-gone", "usb-valid", "dc-valid"; + + usb-otg-in-supply = <&pm8941_5vs1>; + + chg_otg: otg-vbus { }; }; pm8941_gpios: gpios@c000 { -- cgit v1.2.3 From 4ac5a200b06f1522f8bcc7df1e45ee17221d166a Mon Sep 17 00:00:00 2001 From: Stephen Boyd Date: Thu, 26 Jan 2017 16:47:26 -0800 Subject: ARM: dts: qcom-msm8974: Add HS usb node and OTG detection mechanisms This USB controller has two phys, so add them both underneath the ULPI bus, but only enable one of them based on the board configuration. To get OTG to work, we need to add the id and vbus detection info and also populate the regulators for the vbus supply. Signed-off-by: Stephen Boyd Signed-off-by: Andy Gross --- arch/arm/boot/dts/qcom-apq8074-dragonboard.dts | 20 +++++++++++ arch/arm/boot/dts/qcom-msm8974.dtsi | 50 ++++++++++++++++++++++++++ arch/arm/boot/dts/qcom-pm8941.dtsi | 32 ++++++++++++++++- 3 files changed, 101 insertions(+), 1 deletion(-) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts b/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts index ad51df27dfb7..32f3b81f609c 100644 --- a/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts +++ b/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts @@ -44,6 +44,26 @@ vqmmc-supply = <&pm8941_l13>; }; + usb@f9a55000 { + status = "ok"; + phys = <&usb_hs2_phy>; + phy-select = <&tcsr 0xb000 1>; + extcon = <&smbb>, <&usb_id>; + vbus-supply = <&chg_otg>; + hnp-disable; + srp-disable; + adp-disable; + ulpi { + phy@b { + status = "ok"; + v3p3-supply = <&pm8941_l24>; + v1p8-supply = <&pm8941_l6>; + extcon = <&smbb>; + qcom,init-seq = /bits/ 8 <0x1 0x63>; + }; + }; + }; + pinctrl@fd510000 { i2c11_pins: i2c11 { diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi index 0b2014fab4ea..c5ee68a3f7f5 100644 --- a/arch/arm/boot/dts/qcom-msm8974.dtsi +++ b/arch/arm/boot/dts/qcom-msm8974.dtsi @@ -3,6 +3,7 @@ #include #include #include +#include #include #include "skeleton.dtsi" @@ -551,6 +552,11 @@ reg = <0xfc400000 0x4000>; }; + tcsr: syscon@fd4a0000 { + compatible = "syscon"; + reg = <0xfd4a0000 0x10000>; + }; + tcsr_mutex_block: syscon@fd484000 { compatible = "syscon"; reg = <0xfd484000 0x2000>; @@ -620,6 +626,50 @@ status = "disabled"; }; + otg: usb@f9a55000 { + compatible = "qcom,ci-hdrc"; + reg = <0xf9a55000 0x200>, + <0xf9a55200 0x200>; + interrupts = ; + clocks = <&gcc GCC_USB_HS_AHB_CLK>, + <&gcc GCC_USB_HS_SYSTEM_CLK>; + clock-names = "iface", "core"; + assigned-clocks = <&gcc GCC_USB_HS_SYSTEM_CLK>; + assigned-clock-rates = <75000000>; + resets = <&gcc GCC_USB_HS_BCR>; + reset-names = "core"; + phy_type = "ulpi"; + dr_mode = "otg"; + ahb-burst-config = <0>; + phy-names = "usb-phy"; + status = "disabled"; + #reset-cells = <1>; + + ulpi { + usb_hs1_phy: phy@a { + compatible = "qcom,usb-hs-phy-msm8974", + "qcom,usb-hs-phy"; + #phy-cells = <0>; + clocks = <&xo_board>, <&gcc GCC_USB2A_PHY_SLEEP_CLK>; + clock-names = "ref", "sleep"; + resets = <&gcc GCC_USB2A_PHY_BCR>, <&otg 0>; + reset-names = "phy", "por"; + status = "disabled"; + }; + + usb_hs2_phy: phy@b { + compatible = "qcom,usb-hs-phy-msm8974", + "qcom,usb-hs-phy"; + #phy-cells = <0>; + clocks = <&xo_board>, <&gcc GCC_USB2B_PHY_SLEEP_CLK>; + clock-names = "ref", "sleep"; + resets = <&gcc GCC_USB2B_PHY_BCR>, <&otg 1>; + reset-names = "phy", "por"; + status = "disabled"; + }; + }; + }; + rng@f9bff000 { compatible = "qcom,prng"; reg = <0xf9bff000 0x200>; diff --git a/arch/arm/boot/dts/qcom-pm8941.dtsi b/arch/arm/boot/dts/qcom-pm8941.dtsi index 6b16b296f0fa..3fc9f34f45bb 100644 --- a/arch/arm/boot/dts/qcom-pm8941.dtsi +++ b/arch/arm/boot/dts/qcom-pm8941.dtsi @@ -26,7 +26,14 @@ bias-pull-up; }; - charger@1000 { + usb_id: misc@900 { + compatible = "qcom,pm8941-misc"; + reg = <0x900>; + interrupts = <0x0 0x9 0 IRQ_TYPE_EDGE_BOTH>; + interrupt-names = "usb_id"; + }; + + smbb: charger@1000 { compatible = "qcom,pm8941-charger"; reg = <0x1000>; interrupts = <0x0 0x10 7 IRQ_TYPE_EDGE_BOTH>, @@ -175,5 +182,28 @@ status = "disabled"; }; + + regulators { + compatible = "qcom,pm8941-regulators"; + interrupts = <0x1 0x83 0x2 0>, <0x1 0x84 0x2 0>; + interrupt-names = "ocp-5vs1", "ocp-5vs2"; + vin_5vs-supply = <&pm8941_5v>; + + pm8941_5v: s4 { + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-enable-ramp-delay = <500>; + }; + + pm8941_5vs1: 5vs1 { + regulator-enable-ramp-delay = <1000>; + regulator-pull-down; + regulator-over-current-protection; + qcom,ocp-max-retries = <10>; + qcom,ocp-retry-delay = <30>; + qcom,vs-soft-start-strength = <0>; + regulator-initial-mode = <1>; + }; + }; }; }; -- cgit v1.2.3 From b993292f73dcffd113bd5196bd5898432ddd463d Mon Sep 17 00:00:00 2001 From: Stephen Boyd Date: Thu, 26 Jan 2017 16:47:27 -0800 Subject: ARM: dts: qcom-apq8064: Collapse usb support into one node We currently have three device nodes for the same USB hardware block, as evident by the reuse of the same reg address multiple times. Now that the chipidea driver fully supports OTG with the MSM wrapper we can collapse the three nodes into one USB device node, reflecting the true nature of the hardware. Since we're here, we also mark the irq trigger flags correctly, as IRQ_TYPE_LEVEL_HIGH instead of IRQ_TYPE_NONE. Cc: Bjorn Andersson Cc: Srinivas Kandagatla Cc: Nicolas Dechesne Cc: John Stultz Signed-off-by: Stephen Boyd Signed-off-by: Andy Gross --- .../arm/boot/dts/qcom-apq8064-arrow-sd-600eval.dts | 48 +++---- arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts | 20 +-- arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts | 53 ++++--- arch/arm/boot/dts/qcom-apq8064-ifc6410.dts | 53 ++++--- .../arm/boot/dts/qcom-apq8064-sony-xperia-yuga.dts | 16 +-- arch/arm/boot/dts/qcom-apq8064.dtsi | 154 ++++++++++++--------- 6 files changed, 169 insertions(+), 175 deletions(-) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/qcom-apq8064-arrow-sd-600eval.dts b/arch/arm/boot/dts/qcom-apq8064-arrow-sd-600eval.dts index 8f5de029bca9..f245064f320e 100644 --- a/arch/arm/boot/dts/qcom-apq8064-arrow-sd-600eval.dts +++ b/arch/arm/boot/dts/qcom-apq8064-arrow-sd-600eval.dts @@ -319,44 +319,38 @@ target-supply = <&pm8921_lvs7>; }; - /* OTG */ - phy@12500000 { - status = "okay"; - dr_mode = "peripheral"; - vddcx-supply = <&pm8921_s3>; - v3p3-supply = <&pm8921_l3>; - v1p8-supply = <&pm8921_l4>; - }; - - phy@12520000 { - status = "okay"; - vddcx-supply = <&pm8921_s3>; - v3p3-supply = <&pm8921_l3>; - v1p8-supply = <&pm8921_l23>; - }; - - phy@12530000 { - status = "okay"; - vddcx-supply = <&pm8921_s3>; - v3p3-supply = <&pm8921_l3>; - v1p8-supply = <&pm8921_l23>; - }; - - gadget@12500000 { - status = "okay"; - }; - /* OTG */ usb@12500000 { status = "okay"; + dr_mode = "peripheral"; + ulpi { + phy { + v3p3-supply = <&pm8921_l3>; + v1p8-supply = <&pm8921_l4>; + }; + }; }; usb@12520000 { status = "okay"; + dr_mode = "otg"; + ulpi { + phy { + v3p3-supply = <&pm8921_l3>; + v1p8-supply = <&pm8921_l23>; + }; + }; }; usb@12530000 { status = "okay"; + dr_mode = "otg"; + ulpi { + phy { + v3p3-supply = <&pm8921_l3>; + v1p8-supply = <&pm8921_l23>; + }; + }; }; amba { diff --git a/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts b/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts index e39440a86739..3483a66e44c1 100644 --- a/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts +++ b/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts @@ -320,22 +320,16 @@ }; }; - /* OTG */ - phy@12500000 { - status = "okay"; - vddcx-supply = <&pm8921_s3>; - v3p3-supply = <&pm8921_l3>; - v1p8-supply = <&pm8921_l4>; - dr_mode = "otg"; - }; - - gadget@12500000 { - status = "okay"; - }; - /* OTG */ usb@12500000 { status = "okay"; + dr_mode = "otg"; + ulpi { + phy { + v3p3-supply = <&pm8921_l3>; + v1p8-supply = <&pm8921_l4>; + }; + }; }; amba { diff --git a/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts index 35f1d46edded..5b151e425530 100644 --- a/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts +++ b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts @@ -150,42 +150,37 @@ }; /* OTG */ - usb1_phy: phy@12500000 { - status = "okay"; - vddcx-supply = <&pm8921_s3>; - v3p3-supply = <&pm8921_l3>; - v1p8-supply = <&pm8921_l4>; - }; - - usb3_phy: phy@12520000 { - status = "okay"; - vddcx-supply = <&pm8921_s3>; - v3p3-supply = <&pm8921_l3>; - v1p8-supply = <&pm8921_l23>; - }; - - usb4_phy: phy@12530000 { - status = "okay"; - vddcx-supply = <&pm8921_s3>; - v3p3-supply = <&pm8921_l3>; - v1p8-supply = <&pm8921_l23>; - }; - - gadget1: gadget@12500000 { - status = "ok"; - }; - - /* OTG */ - usb1: usb@12500000 { + usb@12500000 { status = "ok"; + dr_mode = "otg"; + ulpi { + phy { + v3p3-supply = <&pm8921_l3>; + v1p8-supply = <&pm8921_l4>; + }; + }; }; - usb3: usb@12520000 { + usb@12520000 { status = "okay"; + dr_mode = "host"; + ulpi { + phy { + v3p3-supply = <&pm8921_l3>; + v1p8-supply = <&pm8921_l23>; + }; + }; }; - usb4: usb@12530000 { + usb@12530000 { status = "okay"; + dr_mode = "host"; + ulpi { + phy { + v3p3-supply = <&pm8921_l3>; + v1p8-supply = <&pm8921_l23>; + }; + }; }; /* on board fixed 3.3v supply */ diff --git a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts index 881ce707311a..053b5bdd7808 100644 --- a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts +++ b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts @@ -244,42 +244,37 @@ }; /* OTG */ - usb1_phy: phy@12500000 { - status = "okay"; - vddcx-supply = <&pm8921_s3>; - v3p3-supply = <&pm8921_l3>; - v1p8-supply = <&pm8921_l4>; - }; - - usb3_phy: phy@12520000 { - status = "okay"; - vddcx-supply = <&pm8921_s3>; - v3p3-supply = <&pm8921_l3>; - v1p8-supply = <&pm8921_l23>; - }; - - usb4_phy: phy@12530000 { - status = "okay"; - vddcx-supply = <&pm8921_s3>; - v3p3-supply = <&pm8921_l3>; - v1p8-supply = <&pm8921_l23>; - }; - - gadget1: gadget@12500000 { - status = "okay"; - }; - - /* OTG */ - usb1: usb@12500000 { + usb@12500000 { status = "okay"; + dr_mode = "otg"; + ulpi { + phy { + v3p3-supply = <&pm8921_l3>; + v1p8-supply = <&pm8921_l4>; + }; + }; }; - usb3: usb@12520000 { + usb@12520000 { status = "okay"; + dr_mode = "host"; + ulpi { + phy { + v3p3-supply = <&pm8921_l3>; + v1p8-supply = <&pm8921_l23>; + }; + }; }; - usb4: usb@12530000 { + usb@12530000 { status = "okay"; + dr_mode = "host"; + ulpi { + phy { + v3p3-supply = <&pm8921_l3>; + v1p8-supply = <&pm8921_l23>; + }; + }; }; pci@1b500000 { diff --git a/arch/arm/boot/dts/qcom-apq8064-sony-xperia-yuga.dts b/arch/arm/boot/dts/qcom-apq8064-sony-xperia-yuga.dts index a34ba3555454..88a9aff41e2f 100644 --- a/arch/arm/boot/dts/qcom-apq8064-sony-xperia-yuga.dts +++ b/arch/arm/boot/dts/qcom-apq8064-sony-xperia-yuga.dts @@ -349,15 +349,15 @@ }; }; - phy@12500000 { - status = "okay"; - vddcx-supply = <&pm8921_s3>; - v3p3-supply = <&pm8921_l3>; - v1p8-supply = <&pm8921_l4>; - }; - - gadget@12500000 { + usb@12500000 { status = "okay"; + dr_mode = "otg"; + ulpi { + phy { + v3p3-supply = <&pm8921_l3>; + v1p8-supply = <&pm8921_l4>; + }; + }; }; gsbi@1a200000 { diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi index 14a6f5ed02de..f3db185a6809 100644 --- a/arch/arm/boot/dts/qcom-apq8064.dtsi +++ b/arch/arm/boot/dts/qcom-apq8064.dtsi @@ -197,7 +197,7 @@ clock-frequency = <27000000>; }; - sleep_clk { + sleep_clk: sleep_clk { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <32768>; @@ -884,81 +884,97 @@ }; }; - usb1_phy: phy@12500000 { - compatible = "qcom,usb-otg-ci"; - reg = <0x12500000 0x400>; - interrupts = ; - status = "disabled"; - - clocks = <&gcc USB_HS1_XCVR_CLK>, - <&gcc USB_HS1_H_CLK>; - clock-names = "core", "iface"; - - resets = <&gcc USB_HS1_RESET>; - reset-names = "link"; - }; - - usb3_phy: phy@12520000 { - compatible = "qcom,usb-otg-ci"; - reg = <0x12520000 0x400>; - interrupts = ; - status = "disabled"; - dr_mode = "host"; - - clocks = <&gcc USB_HS3_XCVR_CLK>, - <&gcc USB_HS3_H_CLK>; - clock-names = "core", "iface"; - - resets = <&gcc USB_HS3_RESET>; - reset-names = "link"; - }; - - usb4_phy: phy@12530000 { - compatible = "qcom,usb-otg-ci"; - reg = <0x12530000 0x400>; - interrupts = ; - status = "disabled"; - dr_mode = "host"; - - clocks = <&gcc USB_HS4_XCVR_CLK>, - <&gcc USB_HS4_H_CLK>; - clock-names = "core", "iface"; - - resets = <&gcc USB_HS4_RESET>; - reset-names = "link"; - }; - - gadget1: gadget@12500000 { - compatible = "qcom,ci-hdrc"; - reg = <0x12500000 0x400>; - status = "disabled"; - dr_mode = "peripheral"; - interrupts = ; - usb-phy = <&usb1_phy>; - }; - usb1: usb@12500000 { - compatible = "qcom,ehci-host"; - reg = <0x12500000 0x400>; - interrupts = ; - status = "disabled"; - usb-phy = <&usb1_phy>; + compatible = "qcom,ci-hdrc"; + reg = <0x12500000 0x200>, + <0x12500200 0x200>; + interrupts = ; + clocks = <&gcc USB_HS1_XCVR_CLK>, <&gcc USB_HS1_H_CLK>; + clock-names = "core", "iface"; + assigned-clocks = <&gcc USB_HS1_XCVR_CLK>; + assigned-clock-rates = <60000000>; + resets = <&gcc USB_HS1_RESET>; + reset-names = "core"; + phy_type = "ulpi"; + ahb-burst-config = <0>; + phys = <&usb_hs1_phy>; + phy-names = "usb-phy"; + status = "disabled"; + #reset-cells = <1>; + + ulpi { + usb_hs1_phy: phy { + compatible = "qcom,usb-hs-phy-apq8064", + "qcom,usb-hs-phy"; + #phy-cells = <0>; + clocks = <&sleep_clk>, <&cxo_board>; + clock-names = "sleep", "ref"; + resets = <&usb1 0>; + reset-names = "por"; + }; + }; }; usb3: usb@12520000 { - compatible = "qcom,ehci-host"; - reg = <0x12520000 0x400>; - interrupts = ; - status = "disabled"; - usb-phy = <&usb3_phy>; + compatible = "qcom,ci-hdrc"; + reg = <0x12520000 0x200>, + <0x12520200 0x200>; + interrupts = ; + clocks = <&gcc USB_HS3_XCVR_CLK>, <&gcc USB_HS3_H_CLK>; + clock-names = "core", "iface"; + assigned-clocks = <&gcc USB_HS3_XCVR_CLK>; + assigned-clock-rates = <60000000>; + resets = <&gcc USB_HS3_RESET>; + reset-names = "core"; + phy_type = "ulpi"; + ahb-burst-config = <0>; + phys = <&usb_hs3_phy>; + phy-names = "usb-phy"; + status = "disabled"; + #reset-cells = <1>; + + ulpi { + usb_hs3_phy: phy { + compatible = "qcom,usb-hs-phy-apq8064", + "qcom,usb-hs-phy"; + #phy-cells = <0>; + clocks = <&sleep_clk>, <&cxo_board>; + clock-names = "sleep", "ref"; + resets = <&usb3 0>; + reset-names = "por"; + }; + }; }; usb4: usb@12530000 { - compatible = "qcom,ehci-host"; - reg = <0x12530000 0x400>; - interrupts = ; - status = "disabled"; - usb-phy = <&usb4_phy>; + compatible = "qcom,ci-hdrc"; + reg = <0x12530000 0x200>, + <0x12530200 0x200>; + interrupts = ; + clocks = <&gcc USB_HS4_XCVR_CLK>, <&gcc USB_HS4_H_CLK>; + clock-names = "core", "iface"; + assigned-clocks = <&gcc USB_HS4_XCVR_CLK>; + assigned-clock-rates = <60000000>; + resets = <&gcc USB_HS4_RESET>; + reset-names = "core"; + phy_type = "ulpi"; + ahb-burst-config = <0>; + phys = <&usb_hs4_phy>; + phy-names = "usb-phy"; + status = "disabled"; + #reset-cells = <1>; + + ulpi { + usb_hs4_phy: phy { + compatible = "qcom,usb-hs-phy-apq8064", + "qcom,usb-hs-phy"; + #phy-cells = <0>; + clocks = <&sleep_clk>, <&cxo_board>; + clock-names = "sleep", "ref"; + resets = <&usb4 0>; + reset-names = "por"; + }; + }; }; sata_phy0: phy@1b400000 { -- cgit v1.2.3 From bc63cd87f3ce924f02e575ffb12f8c10cd7d3780 Mon Sep 17 00:00:00 2001 From: Ulrich Hecht Date: Fri, 19 May 2017 15:07:01 +0200 Subject: ARM: dts: gose: add HDMI input Identical to the setup on Koelsch. Signed-off-by: Ulrich Hecht Reviewed-by: Laurent Pinchart Signed-off-by: Simon Horman --- arch/arm/boot/dts/r8a7793-gose.dts | 68 ++++++++++++++++++++++++++++++++++++-- 1 file changed, 66 insertions(+), 2 deletions(-) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/r8a7793-gose.dts b/arch/arm/boot/dts/r8a7793-gose.dts index 95e51b79c1d7..30f083528468 100644 --- a/arch/arm/boot/dts/r8a7793-gose.dts +++ b/arch/arm/boot/dts/r8a7793-gose.dts @@ -253,12 +253,23 @@ }; }; + hdmi-in { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&adv7612_in>; + }; + }; + }; + hdmi-out { compatible = "hdmi-connector"; type = "a"; port { - hdmi_con: endpoint { + hdmi_con_out: endpoint { remote-endpoint = <&adv7511_out>; }; }; @@ -395,6 +406,11 @@ groups = "audio_clk_a"; function = "audio_clk"; }; + + vin0_pins: vin0 { + groups = "vin0_data24", "vin0_sync", "vin0_clkenb", "vin0_clk"; + function = "vin0"; + }; }; ðer { @@ -552,7 +568,34 @@ port@1 { reg = <1>; adv7511_out: endpoint { - remote-endpoint = <&hdmi_con>; + remote-endpoint = <&hdmi_con_out>; + }; + }; + }; + }; + + hdmi-in@4c { + compatible = "adi,adv7612"; + reg = <0x4c>; + interrupt-parent = <&gpio4>; + interrupts = <2 IRQ_TYPE_LEVEL_LOW>; + default-input = <0>; + + port { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + adv7612_in: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; + }; + + port@2 { + reg = <2>; + adv7612_out: endpoint { + remote-endpoint = <&vin0ep2>; }; }; }; @@ -606,3 +649,24 @@ &ssi1 { shared-pin; }; + +/* HDMI video input */ +&vin0 { + status = "okay"; + pinctrl-0 = <&vin0_pins>; + pinctrl-names = "default"; + + port { + #address-cells = <1>; + #size-cells = <0>; + + vin0ep2: endpoint { + remote-endpoint = <&adv7612_out>; + bus-width = <24>; + hsync-active = <0>; + vsync-active = <0>; + pclk-sample = <1>; + data-active = <1>; + }; + }; +}; -- cgit v1.2.3 From bd71af3c71b51b02f83e3987a3a44ca51894ae8a Mon Sep 17 00:00:00 2001 From: Uwe Kleine-König Date: Thu, 18 May 2017 15:00:09 +0200 Subject: ARM: dts: omap4-devkit8000: fix gpmc ranges property MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit With two separate &gpmc nodes the second ranges property overwrites the first. So put nand and ethernet in a single node and merge the ranges. While at it also fix the ethernet suffix. Signed-off-by: Uwe Kleine-König Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/omap3-devkit8000-common.dtsi | 9 +++------ 1 file changed, 3 insertions(+), 6 deletions(-) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/omap3-devkit8000-common.dtsi b/arch/arm/boot/dts/omap3-devkit8000-common.dtsi index f330c69cc683..82aa9c4a0f1c 100644 --- a/arch/arm/boot/dts/omap3-devkit8000-common.dtsi +++ b/arch/arm/boot/dts/omap3-devkit8000-common.dtsi @@ -201,7 +201,8 @@ }; &gpmc { - ranges = <0 0 0x30000000 0x1000000>; /* CS0: 16MB for NAND */ + ranges = <0 0 0x30000000 0x1000000 /* CS0: 16MB for NAND */ + 6 0 0x2c000000 0x1000000>; /* CS6: 16MB for DM9000 */ nand@0,0 { compatible = "ti,omap2-nand"; @@ -256,12 +257,8 @@ reg = <0x680000 0xf980000>; }; }; -}; - -&gpmc { - ranges = <6 0 0x2c000000 0x1000000>; /* CS6: 16MB for DM9000 */ - ethernet@0,0 { + ethernet@6,0 { compatible = "davicom,dm9000"; reg = <6 0x000 2 6 0x400 2>; /* CS6, offset 0 and 0x400, IO size 2 */ -- cgit v1.2.3 From 3264ce2079f379b006ae951c14ebac81058d87d5 Mon Sep 17 00:00:00 2001 From: Suman Anna Date: Fri, 19 May 2017 15:47:41 -0500 Subject: ARM: dts: am572x-idk: Enable the system mailboxes 5 and 6 Enable the System Mailboxes 5 and 6 and the corresponding child sub-mailbox (IPC 3.x) nodes for the AM572x IDK board. This is needed to enable communication with the respective remote processors IPU1, IPU2, DSP1 and DSP2 from the MPU. Signed-off-by: Suman Anna Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/am572x-idk.dts | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/am572x-idk.dts b/arch/arm/boot/dts/am572x-idk.dts index 8350b4b34b08..9da6d83ca185 100644 --- a/arch/arm/boot/dts/am572x-idk.dts +++ b/arch/arm/boot/dts/am572x-idk.dts @@ -91,3 +91,23 @@ &pcie1 { gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>; }; + +&mailbox5 { + status = "okay"; + mbox_ipu1_ipc3x: mbox_ipu1_ipc3x { + status = "okay"; + }; + mbox_dsp1_ipc3x: mbox_dsp1_ipc3x { + status = "okay"; + }; +}; + +&mailbox6 { + status = "okay"; + mbox_ipu2_ipc3x: mbox_ipu2_ipc3x { + status = "okay"; + }; + mbox_dsp2_ipc3x: mbox_dsp2_ipc3x { + status = "okay"; + }; +}; -- cgit v1.2.3 From 2303587b9b1d7867c6d2ec4ea3bc341a1c8be486 Mon Sep 17 00:00:00 2001 From: Suman Anna Date: Fri, 19 May 2017 15:47:42 -0500 Subject: ARM: dts: am571x-idk: Enable the system mailboxes 5 and 6 Enable the System Mailboxes 5 and 6 and the corresponding child sub-mailbox (IPC 3.x) nodes for the AM571x IDK board. This is needed to enable communication with the respective remote processors IPU1, IPU2, and DSP1 from the MPU. Signed-off-by: Suman Anna Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/am571x-idk.dts | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/am571x-idk.dts b/arch/arm/boot/dts/am571x-idk.dts index ad68d1eb3bc3..7b207835b2d1 100644 --- a/arch/arm/boot/dts/am571x-idk.dts +++ b/arch/arm/boot/dts/am571x-idk.dts @@ -79,3 +79,20 @@ id-gpio = <&gpio5 7 GPIO_ACTIVE_HIGH>; vbus-gpio = <&gpio7 22 GPIO_ACTIVE_HIGH>; }; + +&mailbox5 { + status = "okay"; + mbox_ipu1_ipc3x: mbox_ipu1_ipc3x { + status = "okay"; + }; + mbox_dsp1_ipc3x: mbox_dsp1_ipc3x { + status = "okay"; + }; +}; + +&mailbox6 { + status = "okay"; + mbox_ipu2_ipc3x: mbox_ipu2_ipc3x { + status = "okay"; + }; +}; -- cgit v1.2.3 From c2498af5c036ee72e0a0f4247770cab7fd1f34b5 Mon Sep 17 00:00:00 2001 From: Ricardo Salveti Date: Mon, 22 May 2017 11:51:38 -0300 Subject: arm: dts: boneblack-wireless: add WL1835 Bluetooth device node This adds the serial slave device for the WL1835 Bluetooth interface. Signed-off-by: Ricardo Salveti Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/am335x-boneblack-wireless.dts | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/am335x-boneblack-wireless.dts b/arch/arm/boot/dts/am335x-boneblack-wireless.dts index 105bd10655f7..83f49f616b19 100644 --- a/arch/arm/boot/dts/am335x-boneblack-wireless.dts +++ b/arch/arm/boot/dts/am335x-boneblack-wireless.dts @@ -97,6 +97,11 @@ pinctrl-names = "default"; pinctrl-0 = <&uart3_pins &bt_pins>; status = "okay"; + + bluetooth { + compatible = "ti,wl1835-st"; + enable-gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>; + }; }; &gpio3 { -- cgit v1.2.3 From bfaa10635f2e911f8edc7de4fd40a15322bb91e2 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Mon, 22 May 2017 09:13:46 -0700 Subject: ARM: dts: Enable earlycon stdout path for duovero As long as the kernel cmdline has "earlycon" in it, this allows seeing debug messages earlier and does not require DEBUG_LL to be enabled. Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/omap4-duovero.dtsi | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/omap4-duovero.dtsi b/arch/arm/boot/dts/omap4-duovero.dtsi index ec0bd9779e1a..6e6810c258eb 100644 --- a/arch/arm/boot/dts/omap4-duovero.dtsi +++ b/arch/arm/boot/dts/omap4-duovero.dtsi @@ -12,6 +12,10 @@ model = "Gumstix Duovero"; compatible = "gumstix,omap4-duovero", "ti,omap4430", "ti,omap4"; + chosen { + stdout-path = &uart3; + }; + memory@80000000 { device_type = "memory"; reg = <0x80000000 0x40000000>; /* 1 GB */ -- cgit v1.2.3 From cb11a8baa504a85973def5a848502bbdb944c450 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Mon, 22 May 2017 09:13:45 -0700 Subject: ARM: dts: Enable earlycon stdout path for LogicPD torpedo As long as the kernel cmdline has "earlycon" in it, this allows seeing debug messages earlier and does not require DEBUG_LL to be enabled. Acked-by: Adam Ford Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/logicpd-torpedo-som.dtsi | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/logicpd-torpedo-som.dtsi b/arch/arm/boot/dts/logicpd-torpedo-som.dtsi index efe53998c961..6d89736c7b44 100644 --- a/arch/arm/boot/dts/logicpd-torpedo-som.dtsi +++ b/arch/arm/boot/dts/logicpd-torpedo-som.dtsi @@ -7,6 +7,10 @@ #include / { + chosen { + stdout-path = &uart1; + }; + cpus { cpu@0 { cpu0-supply = <&vcc>; -- cgit v1.2.3 From 05e7d622f1536266e6be352fa344e4cce51c95b0 Mon Sep 17 00:00:00 2001 From: Javier Martinez Canillas Date: Tue, 23 May 2017 15:34:31 +0200 Subject: ARM: dts: omap: Add generic compatible string for I2C EEPROM The at24 driver allows to register I2C EEPROM chips using different vendor and devices, but the I2C subsystem does not take the vendor into account when matching using the I2C table since it only has device entries. But when matching using an OF table, both the vendor and device has to be taken into account so the driver defines only a set of compatible strings using the "atmel" vendor as a generic fallback for compatible I2C devices. So add this generic fallback to the device node compatible string to make the device to match the driver using the OF device ID table. Signed-off-by: Javier Martinez Canillas Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/am335x-baltos.dtsi | 2 +- arch/arm/boot/dts/am335x-base0033.dts | 2 +- arch/arm/boot/dts/am335x-bone-common.dtsi | 10 +++++----- arch/arm/boot/dts/am335x-nano.dts | 2 +- arch/arm/boot/dts/am335x-pepper.dts | 2 +- arch/arm/boot/dts/am335x-shc.dts | 2 +- arch/arm/boot/dts/am335x-sl50.dts | 2 +- arch/arm/boot/dts/am437x-idk-evm.dts | 2 +- arch/arm/boot/dts/am437x-sk-evm.dts | 2 +- arch/arm/boot/dts/am43x-epos-evm.dts | 2 +- arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi | 2 +- arch/arm/boot/dts/omap3-cm-t3x.dtsi | 2 +- arch/arm/boot/dts/omap3-gta04.dtsi | 2 +- arch/arm/boot/dts/omap3-sb-t35.dtsi | 2 +- arch/arm/boot/dts/omap4-var-som-om44.dtsi | 2 +- arch/arm/boot/dts/omap5-cm-t54.dts | 2 +- arch/arm/boot/dts/omap5-sbc-t54.dts | 2 +- 17 files changed, 21 insertions(+), 21 deletions(-) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/am335x-baltos.dtsi b/arch/arm/boot/dts/am335x-baltos.dtsi index d42b98f15e8b..ec6052c521ef 100644 --- a/arch/arm/boot/dts/am335x-baltos.dtsi +++ b/arch/arm/boot/dts/am335x-baltos.dtsi @@ -255,7 +255,7 @@ }; at24@50 { - compatible = "at24,24c02"; + compatible = "atmel,24c02"; pagesize = <8>; reg = <0x50>; }; diff --git a/arch/arm/boot/dts/am335x-base0033.dts b/arch/arm/boot/dts/am335x-base0033.dts index c2bee452dab8..29782be07605 100644 --- a/arch/arm/boot/dts/am335x-base0033.dts +++ b/arch/arm/boot/dts/am335x-base0033.dts @@ -89,7 +89,7 @@ &i2c0 { eeprom: eeprom@50 { - compatible = "at,24c256"; + compatible = "atmel,24c256"; reg = <0x50>; }; }; diff --git a/arch/arm/boot/dts/am335x-bone-common.dtsi b/arch/arm/boot/dts/am335x-bone-common.dtsi index bf6b26abe35b..1d154444dfef 100644 --- a/arch/arm/boot/dts/am335x-bone-common.dtsi +++ b/arch/arm/boot/dts/am335x-bone-common.dtsi @@ -232,7 +232,7 @@ }; baseboard_eeprom: baseboard_eeprom@50 { - compatible = "at,24c256"; + compatible = "atmel,24c256"; reg = <0x50>; #address-cells = <1>; @@ -251,7 +251,7 @@ clock-frequency = <100000>; cape_eeprom0: cape_eeprom0@54 { - compatible = "at,24c256"; + compatible = "atmel,24c256"; reg = <0x54>; #address-cells = <1>; #size-cells = <1>; @@ -261,7 +261,7 @@ }; cape_eeprom1: cape_eeprom1@55 { - compatible = "at,24c256"; + compatible = "atmel,24c256"; reg = <0x55>; #address-cells = <1>; #size-cells = <1>; @@ -271,7 +271,7 @@ }; cape_eeprom2: cape_eeprom2@56 { - compatible = "at,24c256"; + compatible = "atmel,24c256"; reg = <0x56>; #address-cells = <1>; #size-cells = <1>; @@ -281,7 +281,7 @@ }; cape_eeprom3: cape_eeprom3@57 { - compatible = "at,24c256"; + compatible = "atmel,24c256"; reg = <0x57>; #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/am335x-nano.dts b/arch/arm/boot/dts/am335x-nano.dts index 807494bc722b..946d7069f417 100644 --- a/arch/arm/boot/dts/am335x-nano.dts +++ b/arch/arm/boot/dts/am335x-nano.dts @@ -224,7 +224,7 @@ }; eeprom@53 { - compatible = "microchip,24c02"; + compatible = "microchip,24c02", "atmel,24c02"; reg = <0x53>; pagesize = <8>; }; diff --git a/arch/arm/boot/dts/am335x-pepper.dts b/arch/arm/boot/dts/am335x-pepper.dts index 30e2f8770aaf..03c7d77023c6 100644 --- a/arch/arm/boot/dts/am335x-pepper.dts +++ b/arch/arm/boot/dts/am335x-pepper.dts @@ -67,7 +67,7 @@ }; eeprom: eeprom@50 { - compatible = "at,24c256"; + compatible = "atmel,24c256"; reg = <0x50>; }; diff --git a/arch/arm/boot/dts/am335x-shc.dts b/arch/arm/boot/dts/am335x-shc.dts index bf8727a19ece..4f6a286ea293 100644 --- a/arch/arm/boot/dts/am335x-shc.dts +++ b/arch/arm/boot/dts/am335x-shc.dts @@ -188,7 +188,7 @@ }; at24@50 { - compatible = "at24,24c32"; + compatible = "atmel,24c32"; pagesize = <32>; reg = <0x50>; }; diff --git a/arch/arm/boot/dts/am335x-sl50.dts b/arch/arm/boot/dts/am335x-sl50.dts index c5d2589c55fc..a82a4042eb9d 100644 --- a/arch/arm/boot/dts/am335x-sl50.dts +++ b/arch/arm/boot/dts/am335x-sl50.dts @@ -309,7 +309,7 @@ }; eeprom: eeprom@50 { - compatible = "at,24c256"; + compatible = "atmel,24c256"; reg = <0x50>; }; diff --git a/arch/arm/boot/dts/am437x-idk-evm.dts b/arch/arm/boot/dts/am437x-idk-evm.dts index c1f7f9336e64..5e364473067f 100644 --- a/arch/arm/boot/dts/am437x-idk-evm.dts +++ b/arch/arm/boot/dts/am437x-idk-evm.dts @@ -339,7 +339,7 @@ clock-frequency = <400000>; at24@50 { - compatible = "at24,24c256"; + compatible = "atmel,24c256"; pagesize = <64>; reg = <0x50>; }; diff --git a/arch/arm/boot/dts/am437x-sk-evm.dts b/arch/arm/boot/dts/am437x-sk-evm.dts index 4dc54bee2f36..a62e1583da04 100644 --- a/arch/arm/boot/dts/am437x-sk-evm.dts +++ b/arch/arm/boot/dts/am437x-sk-evm.dts @@ -511,7 +511,7 @@ }; at24@50 { - compatible = "at24,24c256"; + compatible = "atmel,24c256"; pagesize = <64>; reg = <0x50>; }; diff --git a/arch/arm/boot/dts/am43x-epos-evm.dts b/arch/arm/boot/dts/am43x-epos-evm.dts index 9acd4ccdec4e..f6648ab10d29 100644 --- a/arch/arm/boot/dts/am43x-epos-evm.dts +++ b/arch/arm/boot/dts/am43x-epos-evm.dts @@ -477,7 +477,7 @@ }; at24@50 { - compatible = "at24,24c256"; + compatible = "atmel,24c256"; pagesize = <64>; reg = <0x50>; }; diff --git a/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi b/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi index 585d792a8fdd..fdfe5b16b806 100644 --- a/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi +++ b/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi @@ -388,7 +388,7 @@ }; eeprom: eeprom@50 { - compatible = "at,24c32"; + compatible = "atmel,24c32"; reg = <0x50>; }; }; diff --git a/arch/arm/boot/dts/omap3-cm-t3x.dtsi b/arch/arm/boot/dts/omap3-cm-t3x.dtsi index 57b9a028a49a..fccd5383243c 100644 --- a/arch/arm/boot/dts/omap3-cm-t3x.dtsi +++ b/arch/arm/boot/dts/omap3-cm-t3x.dtsi @@ -188,7 +188,7 @@ clock-frequency = <400000>; at24@50 { - compatible = "at24,24c02"; + compatible = "atmel,24c02"; pagesize = <16>; reg = <0x50>; }; diff --git a/arch/arm/boot/dts/omap3-gta04.dtsi b/arch/arm/boot/dts/omap3-gta04.dtsi index b3a8b1f24499..43a0456e3dcc 100644 --- a/arch/arm/boot/dts/omap3-gta04.dtsi +++ b/arch/arm/boot/dts/omap3-gta04.dtsi @@ -418,7 +418,7 @@ /* RFID EEPROM */ m24lr64@50 { - compatible = "at,24c64"; + compatible = "atmel,24c64"; reg = <0x50>; }; }; diff --git a/arch/arm/boot/dts/omap3-sb-t35.dtsi b/arch/arm/boot/dts/omap3-sb-t35.dtsi index 91e15af78949..4476fb685a1b 100644 --- a/arch/arm/boot/dts/omap3-sb-t35.dtsi +++ b/arch/arm/boot/dts/omap3-sb-t35.dtsi @@ -89,7 +89,7 @@ clock-frequency = <400000>; at24@50 { - compatible = "at24,24c02"; + compatible = "atmel,24c02"; pagesize = <16>; reg = <0x50>; }; diff --git a/arch/arm/boot/dts/omap4-var-som-om44.dtsi b/arch/arm/boot/dts/omap4-var-som-om44.dtsi index 758b6eb7ae43..6500bfc8d130 100644 --- a/arch/arm/boot/dts/omap4-var-som-om44.dtsi +++ b/arch/arm/boot/dts/omap4-var-som-om44.dtsi @@ -241,7 +241,7 @@ }; eeprom@50 { - compatible = "microchip,24c32"; + compatible = "microchip,24c32", "atmel,24c32"; reg = <0x50>; }; }; diff --git a/arch/arm/boot/dts/omap5-cm-t54.dts b/arch/arm/boot/dts/omap5-cm-t54.dts index b153f604932a..78397f66d0b2 100644 --- a/arch/arm/boot/dts/omap5-cm-t54.dts +++ b/arch/arm/boot/dts/omap5-cm-t54.dts @@ -404,7 +404,7 @@ clock-frequency = <400000>; at24@50 { - compatible = "at24,24c02"; + compatible = "atmel,24c02"; pagesize = <16>; reg = <0x50>; }; diff --git a/arch/arm/boot/dts/omap5-sbc-t54.dts b/arch/arm/boot/dts/omap5-sbc-t54.dts index 337bbbc01a35..7b8810d13257 100644 --- a/arch/arm/boot/dts/omap5-sbc-t54.dts +++ b/arch/arm/boot/dts/omap5-sbc-t54.dts @@ -44,7 +44,7 @@ clock-frequency = <400000>; at24@50 { - compatible = "at24,24c02"; + compatible = "atmel,24c02"; pagesize = <16>; reg = <0x50>; }; -- cgit v1.2.3 From 05306b848b367e326dc76e7552192056338ac6ad Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Thu, 25 May 2017 09:15:58 -0700 Subject: ARM: dts: Configure USB host for 37xx-evm Looks like nobody bothered to configure USB host for 37xx-evm when we converted things to device tree, so let's add it. This is similar to beagleboard configuration with few extra quirks to configure the port. And as with beagleboard, OHCI won't work because there is no USB LS/FS PHY. A HS USB hub is needed to use devices like keyboard and mice. Acked-by: Roger Quadros Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/omap3-evm-37xx.dts | 102 ++++++++++++++++++++++++++++++++ arch/arm/boot/dts/omap3-evm-common.dtsi | 33 +++++++++++ 2 files changed, 135 insertions(+) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/omap3-evm-37xx.dts b/arch/arm/boot/dts/omap3-evm-37xx.dts index 4f9a76544602..c963b31ec3b3 100644 --- a/arch/arm/boot/dts/omap3-evm-37xx.dts +++ b/arch/arm/boot/dts/omap3-evm-37xx.dts @@ -34,7 +34,15 @@ >; }; +&hsusb2_phy { + pinctrl-names = "default"; + pinctrl-0 = <&ehci_phy_pins>; +}; + &omap3_pmx_core { + pinctrl-names = "default"; + pinctrl-0 = <&on_board_gpio_61 &hsusb2_pins>; + dss_dpi_pins1: pinmux_dss_dpi_pins2 { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */ @@ -98,6 +106,37 @@ >; }; + /* Devices are routed with gpmc_nbe1.gpio_61 to on-board devices */ + on_board_gpio_61: pinmux_ehci_port_select_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x20c8, PIN_OUTPUT | MUX_MODE4) + >; + }; + + /* Used by OHCI and EHCI. OHCI won't work without external phy */ + hsusb2_pins: pinmux_hsusb2_pins { + pinctrl-single,pins = < + + /* mcspi1_cs3.hsusb2_data2 */ + OMAP3_CORE1_IOPAD(0x21d4, PIN_INPUT_PULLDOWN | MUX_MODE3) + + /* mcspi2_clk.hsusb2_data7 */ + OMAP3_CORE1_IOPAD(0x21d6, PIN_INPUT_PULLDOWN | MUX_MODE3) + + /* mcspi2_simo.hsusb2_data4 */ + OMAP3_CORE1_IOPAD(0x21d8, PIN_INPUT_PULLDOWN | MUX_MODE3) + + /* mcspi2_somi.hsusb2_data5 */ + OMAP3_CORE1_IOPAD(0x21da, PIN_INPUT_PULLDOWN | MUX_MODE3) + + /* mcspi2_cs0.hsusb2_data6 */ + OMAP3_CORE1_IOPAD(0x21dc, PIN_INPUT_PULLDOWN | MUX_MODE3) + + /* mcspi2_cs1.hsusb2_data3 */ + OMAP3_CORE1_IOPAD(0x21de, PIN_INPUT_PULLDOWN | MUX_MODE3) + >; + }; + wl12xx_gpio: pinmux_wl12xx_gpio { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x2180, PIN_OUTPUT | MUX_MODE4) /* uart1_cts.gpio_150 */ @@ -112,6 +151,46 @@ }; }; +&omap3_pmx_core2 { + pinctrl-names = "default"; + pinctrl-0 = <&hsusb2_2_pins>; + + ehci_phy_pins: pinmux_ehci_phy_pins { + pinctrl-single,pins = < + + /* EHCI PHY reset GPIO etk_d7.gpio_21 */ + OMAP3630_CORE2_IOPAD(0x25ea, PIN_OUTPUT | MUX_MODE4) + + /* EHCI VBUS etk_d8.gpio_22 */ + OMAP3630_CORE2_IOPAD(0x25ec, PIN_OUTPUT | MUX_MODE4) + >; + }; + + /* Used by OHCI and EHCI. OHCI won't work without external phy */ + hsusb2_2_pins: pinmux_hsusb2_2_pins { + pinctrl-single,pins = < + + /* etk_d10.hsusb2_clk */ + OMAP3630_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3) + + /* etk_d11.hsusb2_stp */ + OMAP3630_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3) + + /* etk_d12.hsusb2_dir */ + OMAP3630_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3) + + /* etk_d13.hsusb2_nxt */ + OMAP3630_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3) + + /* etk_d14.hsusb2_data0 */ + OMAP3630_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3) + + /* etk_d15.hsusb2_data1 */ + OMAP3630_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3) + >; + }; +}; + &omap3_pmx_wkup { dss_dpi_pins2: pinmux_dss_dpi_pins1 { pinctrl-single,pins = < @@ -153,6 +232,29 @@ pinctrl-0 = <&uart3_pins>; }; +/* + * GPIO_61 (nUSB2_EN_1V8) must be low to enable on-board EHCI USB2 interface + * for bus switch SN74CB3Q3384A, level-shifter SN74AVC16T245DGGR, and 1.8V. + */ +&gpio2 { + en_usb2_port { + gpio-hog; + gpios = <29 GPIO_ACTIVE_HIGH>; /* gpio_61 */ + output-low; + line-name = "enable usb2 port"; + }; +}; + +/* T2_GPIO_2 low to route GPIO_61 to on-board devices */ +&twl_gpio { + en_on_board_gpio_61 { + gpio-hog; + gpios = <2 GPIO_ACTIVE_HIGH>; + output-low; + line-name = "en_hsusb2_clk"; + }; +}; + &gpmc { ranges = <0 0 0x30000000 0x1000000>, /* CS0: 16MB for NAND */ <5 0 0x2c000000 0x01000000>; diff --git a/arch/arm/boot/dts/omap3-evm-common.dtsi b/arch/arm/boot/dts/omap3-evm-common.dtsi index 7780e2528697..2b1d6977a535 100644 --- a/arch/arm/boot/dts/omap3-evm-common.dtsi +++ b/arch/arm/boot/dts/omap3-evm-common.dtsi @@ -12,6 +12,24 @@ }; }; + /* HS USB Port 2 Power */ + hsusb2_power: hsusb2_power_reg { + compatible = "regulator-fixed"; + regulator-name = "hsusb2_vbus"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio1 22 GPIO_ACTIVE_HIGH>; /* gpio_22 */ + startup-delay-us = <70000>; + enable-active-high; + }; + + /* HS USB Host PHY on PORT 2 */ + hsusb2_phy: hsusb2_phy { + compatible = "usb-nop-xceiv"; + reset-gpios = <&gpio1 21 GPIO_ACTIVE_LOW>; /* gpio_21 */ + vcc-supply = <&hsusb2_power>; + }; + leds { compatible = "gpio-leds"; ledb { @@ -142,6 +160,14 @@ >; }; +&usbhshost { + port2-mode = "ehci-phy"; +}; + +&usbhsehci { + phys = <0 &hsusb2_phy>; +}; + &usb_otg_hs { interface-type = <0>; usb-phy = <&usb2_phy>; @@ -158,3 +184,10 @@ reg = <5 0 0xff>; }; }; + +&vaux2 { + regulator-name = "usb_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; +}; -- cgit v1.2.3 From 200a575b68d25c5ad4d3379e6d43e9b3f6083e1b Mon Sep 17 00:00:00 2001 From: Martin Blumenstingl Date: Mon, 17 Apr 2017 23:39:37 +0200 Subject: ARM: dts: meson: organize devices in their corresponding busses The Amlogic Meson SoCs have most of the internal peripherals organized in busses. Use them to make the dts easier to read and to avoid duplicated register (bus) offset definitions. The bus information is taken from the vendor kernel: #define IO_CBUS_PHY_BASE 0xc1100000 ///2M #define IO_AOBUS_PHY_BASE 0xc8100000 ///1M There are more internal busses (such as the abp bus which seems to contain audio, HDMI and Mali registers), but since we don't have drivers for them yet these are not added (yet). Signed-off-by: Martin Blumenstingl [khilman: minor whitespace fix] Signed-off-by: Kevin Hilman --- arch/arm/boot/dts/meson.dtsi | 178 ++++++++++++++++++++++-------------------- arch/arm/boot/dts/meson6.dtsi | 2 - arch/arm/boot/dts/meson8.dtsi | 116 ++++++++++++++++++--------- 3 files changed, 170 insertions(+), 126 deletions(-) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/meson.dtsi b/arch/arm/boot/dts/meson.dtsi index 8c77c87660cd..8d9c36970dfd 100644 --- a/arch/arm/boot/dts/meson.dtsi +++ b/arch/arm/boot/dts/meson.dtsi @@ -65,100 +65,108 @@ #interrupt-cells = <3>; }; - timer@c1109940 { - compatible = "amlogic,meson6-timer"; - reg = <0xc1109940 0x18>; - interrupts = <0 10 1>; - }; - soc { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; ranges; - wdt: watchdog@c1109900 { - compatible = "amlogic,meson6-wdt"; - reg = <0xc1109900 0x8>; - interrupts = <0 0 1>; - }; - - uart_AO: serial@c81004c0 { - compatible = "amlogic,meson-uart"; - reg = <0xc81004c0 0x18>; - interrupts = <0 90 1>; - clocks = <&clk81>; - status = "disabled"; - }; - - uart_A: serial@c11084c0 { - compatible = "amlogic,meson-uart"; - reg = <0xc11084c0 0x18>; - interrupts = <0 26 1>; - clocks = <&clk81>; - status = "disabled"; - }; - - uart_B: serial@c11084dc { - compatible = "amlogic,meson-uart"; - reg = <0xc11084dc 0x18>; - interrupts = <0 75 1>; - clocks = <&clk81>; - status = "disabled"; - }; - - uart_C: serial@c1108700 { - compatible = "amlogic,meson-uart"; - reg = <0xc1108700 0x18>; - interrupts = <0 93 1>; - clocks = <&clk81>; - status = "disabled"; - }; - - i2c_AO: i2c@c8100500 { - compatible = "amlogic,meson6-i2c"; - reg = <0xc8100500 0x20>; - interrupts = <0 92 1>; - clocks = <&clk81>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - i2c_A: i2c@c1108500 { - compatible = "amlogic,meson6-i2c"; - reg = <0xc1108500 0x20>; - interrupts = <0 21 1>; - clocks = <&clk81>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - i2c_B: i2c@c11087c0 { - compatible = "amlogic,meson6-i2c"; - reg = <0xc11087c0 0x20>; - interrupts = <0 128 1>; - clocks = <&clk81>; + cbus: cbus@c1100000 { + compatible = "simple-bus"; + reg = <0xc1100000 0x200000>; #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; + #size-cells = <1>; + ranges = <0x0 0xc1100000 0x200000>; + + uart_A: serial@84c0 { + compatible = "amlogic,meson-uart"; + reg = <0x84c0 0x18>; + interrupts = <0 26 1>; + status = "disabled"; + }; + + uart_B: serial@84dc { + compatible = "amlogic,meson-uart"; + reg = <0x84dc 0x18>; + interrupts = <0 75 1>; + status = "disabled"; + }; + + i2c_A: i2c@8500 { + compatible = "amlogic,meson6-i2c"; + reg = <0x8500 0x20>; + interrupts = <0 21 1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + uart_C: serial@8700 { + compatible = "amlogic,meson-uart"; + reg = <0x8700 0x18>; + interrupts = <0 93 1>; + status = "disabled"; + }; + + i2c_B: i2c@87c0 { + compatible = "amlogic,meson6-i2c"; + reg = <0x87c0 0x20>; + interrupts = <0 128 1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spifc: spi@8c80 { + compatible = "amlogic,meson6-spifc"; + reg = <0x8c80 0x80>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + wdt: watchdog@9900 { + compatible = "amlogic,meson6-wdt"; + reg = <0x9900 0x8>; + interrupts = <0 0 1>; + }; + + timer@9940 { + compatible = "amlogic,meson6-timer"; + reg = <0x9940 0x18>; + interrupts = <0 10 1>; + }; }; - ir_receiver: ir-receiver@c8100480 { - compatible= "amlogic,meson6-ir"; - reg = <0xc8100480 0x20>; - interrupts = <0 15 1>; - status = "disabled"; - }; - - spifc: spi@c1108c80 { - compatible = "amlogic,meson6-spifc"; - reg = <0xc1108c80 0x80>; + aobus: aobus@c8100000 { + compatible = "simple-bus"; + reg = <0xc8100000 0x100000>; #address-cells = <1>; - #size-cells = <0>; - clocks = <&clk81>; - status = "disabled"; + #size-cells = <1>; + ranges = <0x0 0xc8100000 0x100000>; + + ir_receiver: ir-receiver@480 { + compatible= "amlogic,meson6-ir"; + reg = <0x480 0x20>; + interrupts = <0 15 1>; + status = "disabled"; + }; + + uart_AO: serial@4c0 { + compatible = "amlogic,meson-uart"; + reg = <0x4c0 0x18>; + interrupts = <0 90 1>; + status = "disabled"; + }; + + i2c_AO: i2c@500 { + compatible = "amlogic,meson6-i2c"; + reg = <0x500 0x20>; + interrupts = <0 92 1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; }; ethmac: ethernet@c9410000 { @@ -167,8 +175,6 @@ 0xc1108108 0x4>; interrupts = <0 8 1>; interrupt-names = "macirq"; - clocks = <&clk81>; - clock-names = "stmmaceth"; status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/meson6.dtsi b/arch/arm/boot/dts/meson6.dtsi index 8b33be15af94..b0fc91ffd6a1 100644 --- a/arch/arm/boot/dts/meson6.dtsi +++ b/arch/arm/boot/dts/meson6.dtsi @@ -51,8 +51,6 @@ model = "Amlogic Meson6 SoC"; compatible = "amlogic,meson6"; - interrupt-parent = <&gic>; - cpus { #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/meson8.dtsi b/arch/arm/boot/dts/meson8.dtsi index ebc763eab195..5eaaf067c76a 100644 --- a/arch/arm/boot/dts/meson8.dtsi +++ b/arch/arm/boot/dts/meson8.dtsi @@ -50,8 +50,6 @@ model = "Amlogic Meson8 SoC"; compatible = "amlogic,meson8"; - interrupt-parent = <&gic>; - cpus { #address-cells = <1>; #size-cells = <0>; @@ -91,18 +89,55 @@ clock-frequency = <141666666>; }; - pinctrl_cbus: pinctrl@c1109880 { +}; /* end of / */ + +&aobus { + pinctrl_aobus: pinctrl@84 { + compatible = "amlogic,meson8-aobus-pinctrl"; + reg = <0x84 0xc>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + gpio_ao: ao-bank@14 { + reg = <0x14 0x4>, + <0x2c 0x4>, + <0x24 0x8>; + reg-names = "mux", "pull", "gpio"; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pinctrl_aobus 0 120 16>; + }; + + uart_ao_a_pins: uart_ao_a { + mux { + groups = "uart_tx_ao_a", "uart_rx_ao_a"; + function = "uart_ao"; + }; + }; + + i2c_ao_pins: i2c_mst_ao { + mux { + groups = "i2c_mst_sck_ao", "i2c_mst_sda_ao"; + function = "i2c_mst_ao"; + }; + }; + }; +}; + +&cbus { + pinctrl_cbus: pinctrl@9880 { compatible = "amlogic,meson8-cbus-pinctrl"; - reg = <0xc1109880 0x10>; + reg = <0x9880 0x10>; #address-cells = <1>; #size-cells = <1>; ranges; - gpio: banks@c11080b0 { - reg = <0xc11080b0 0x28>, - <0xc11080e8 0x18>, - <0xc1108120 0x18>, - <0xc1108030 0x30>; + gpio: banks@80b0 { + reg = <0x80b0 0x28>, + <0x80e8 0x18>, + <0x8120 0x18>, + <0x8030 0x30>; reg-names = "mux", "pull", "pull-enable", "gpio"; gpio-controller; #gpio-cells = <2>; @@ -134,36 +169,41 @@ }; }; }; +}; - pinctrl_aobus: pinctrl@c8100084 { - compatible = "amlogic,meson8-aobus-pinctrl"; - reg = <0xc8100084 0xc>; - #address-cells = <1>; - #size-cells = <1>; - ranges; +ðmac { + clocks = <&clk81>; + clock-names = "stmmaceth"; +}; - gpio_ao: ao-bank@c1108030 { - reg = <0xc8100014 0x4>, - <0xc810002c 0x4>, - <0xc8100024 0x8>; - reg-names = "mux", "pull", "gpio"; - gpio-controller; - #gpio-cells = <2>; - gpio-ranges = <&pinctrl_aobus 0 120 16>; - }; +&i2c_AO { + clocks = <&clk81>; +}; - uart_ao_a_pins: uart_ao_a { - mux { - groups = "uart_tx_ao_a", "uart_rx_ao_a"; - function = "uart_ao"; - }; - }; +&i2c_A { + clocks = <&clk81>; +}; - i2c_ao_pins: i2c_mst_ao { - mux { - groups = "i2c_mst_sck_ao", "i2c_mst_sda_ao"; - function = "i2c_mst_ao"; - }; - }; - }; -}; /* end of / */ +&i2c_B { + clocks = <&clk81>; +}; + +&spifc { + clocks = <&clk81>; +}; + +&uart_AO { + clocks = <&clk81>; +}; + +&uart_A { + clocks = <&clk81>; +}; + +&uart_B { + clocks = <&clk81>; +}; + +&uart_C { + clocks = <&clk81>; +}; -- cgit v1.2.3 From f44135e1f961d5bed1e737ff8e67564cdfa5eb85 Mon Sep 17 00:00:00 2001 From: Martin Blumenstingl Date: Mon, 17 Apr 2017 23:39:38 +0200 Subject: ARM: dts: meson8b: inherit meson.dtsi from meson8b.dtsi Currently only meson6.dtsi and meson8.dtsi inherit the generic meson.dtsi. However, since the Meson8b platform is basically a slightly updated version of Meson8 we can safely inherit meson.dtsi. An indicator for this are the nodes which are identical in meson.dtsi and meson8b.dtsi (L2, gic, timer, uart_AO, uart_A, uart_B, uart_C). Additionally this makes the following devices available on Meson8b which were not avaialble before (however, since all affected drivers support Meson6, Meson8 and the whole GX series there's no reason to assume that they are not working): - i2c_a and i2c_B - the IR receiver - SPFIC (SPI flash controller) - the dwmac ethernet controller Differences between Meson8 and Meson8b seem to be: - ARM Cortex-A5 core instead of Cortex-A9 on Meson8 - dwmac on Meson8b supports RGMII - small pinctrl updates Inheriting meson.dtsi makes it easier to maintain by removing duplicate definitions. Signed-off-by: Martin Blumenstingl Signed-off-by: Kevin Hilman --- arch/arm/boot/dts/meson8b.dtsi | 210 +++++++++++++++++------------------------ 1 file changed, 84 insertions(+), 126 deletions(-) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/meson8b.dtsi b/arch/arm/boot/dts/meson8b.dtsi index 828aa49c678c..ef9ac974111c 100644 --- a/arch/arm/boot/dts/meson8b.dtsi +++ b/arch/arm/boot/dts/meson8b.dtsi @@ -47,11 +47,9 @@ #include #include #include -#include "skeleton.dtsi" +#include "meson.dtsi" / { - interrupt-parent = <&gic>; - cpus { #address-cells = <1>; #size-cells = <0>; @@ -84,147 +82,107 @@ reg = <0x203>; }; }; +}; /* end of / */ - soc { - compatible = "simple-bus"; +&aobus { + pinctrl_aobus: pinctrl@84 { + compatible = "amlogic,meson8b-aobus-pinctrl"; + reg = <0x84 0xc>; #address-cells = <1>; #size-cells = <1>; ranges; - L2: l2-cache-controller@c4200000 { - compatible = "arm,pl310-cache"; - reg = <0xc4200000 0x1000>; - cache-unified; - cache-level = <2>; + gpio_ao: ao-bank@14 { + reg = <0x14 0x4>, + <0x2c 0x4>, + <0x24 0x8>; + reg-names = "mux", "pull", "gpio"; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pinctrl_aobus 0 130 16>; }; - gic: interrupt-controller@c4301000 { - compatible = "arm,cortex-a9-gic"; - reg = <0xc4301000 0x1000>, - <0xc4300100 0x0100>; - interrupt-controller; - #interrupt-cells = <3>; - }; - - reset: reset-controller@c1104404 { - compatible = "amlogic,meson8b-reset"; - reg = <0xc1104404 0x20>; - #reset-cells = <1>; - }; - - wdt: watchdog@c1109900 { - compatible = "amlogic,meson8b-wdt"; - reg = <0xc1109900 0x8>; - interrupts = <0 0 1>; + uart_ao_a_pins: uart_ao_a { + mux { + groups = "uart_tx_ao_a", "uart_rx_ao_a"; + function = "uart_ao"; + }; }; + }; +}; - timer@c1109940 { - compatible = "amlogic,meson6-timer"; - reg = <0xc1109940 0x18>; - interrupts = <0 10 1>; - }; +&cbus { + clkc: clock-controller@4000 { + #clock-cells = <1>; + compatible = "amlogic,meson8b-clkc"; + reg = <0x8000 0x4>, <0x4000 0x460>; + }; - uart_AO: serial@c81004c0 { - compatible = "amlogic,meson-uart"; - reg = <0xc81004c0 0x18>; - interrupts = <0 90 1>; - clocks = <&clkc CLKID_CLK81>; - status = "disabled"; - }; + reset: reset-controller@4404 { + compatible = "amlogic,meson8b-reset"; + reg = <0x4404 0x20>; + #reset-cells = <1>; + }; - uart_A: serial@c11084c0 { - compatible = "amlogic,meson-uart"; - reg = <0xc11084c0 0x18>; - interrupts = <0 26 1>; - clocks = <&clkc CLKID_CLK81>; - status = "disabled"; - }; + pwm_ab: pwm@8550 { + compatible = "amlogic,meson8b-pwm"; + reg = <0x8550 0x10>; + #pwm-cells = <3>; + status = "disabled"; + }; - uart_B: serial@c11084dc { - compatible = "amlogic,meson-uart"; - reg = <0xc11084dc 0x18>; - interrupts = <0 75 1>; - clocks = <&clkc CLKID_CLK81>; - status = "disabled"; - }; + pwm_cd: pwm@8650 { + compatible = "amlogic,meson8b-pwm"; + reg = <0x8650 0x10>; + #pwm-cells = <3>; + status = "disabled"; + }; - uart_C: serial@c1108700 { - compatible = "amlogic,meson-uart"; - reg = <0xc1108700 0x18>; - interrupts = <0 93 1>; - clocks = <&clkc CLKID_CLK81>; - status = "disabled"; - }; + pwm_ef: pwm@86c0 { + compatible = "amlogic,meson8b-pwm"; + reg = <0x86c0 0x10>; + #pwm-cells = <3>; + status = "disabled"; + }; - clkc: clock-controller@c1104000 { - #clock-cells = <1>; - compatible = "amlogic,meson8b-clkc"; - reg = <0xc1108000 0x4>, <0xc1104000 0x460>; - }; + wdt: watchdog@9900 { + compatible = "amlogic,meson8b-wdt"; + reg = <0x9900 0x8>; + interrupts = <0 0 1>; + }; - pwm_ab: pwm@8550 { - compatible = "amlogic,meson8b-pwm"; - reg = <0xc1108550 0x10>; - #pwm-cells = <3>; - status = "disabled"; - }; + pinctrl_cbus: pinctrl@9880 { + compatible = "amlogic,meson8b-cbus-pinctrl"; + reg = <0x9880 0x10>; + #address-cells = <1>; + #size-cells = <1>; + ranges; - pwm_cd: pwm@8650 { - compatible = "amlogic,meson8b-pwm"; - reg = <0xc1108650 0x10>; - #pwm-cells = <3>; - status = "disabled"; + gpio: banks@80b0 { + reg = <0x80b0 0x28>, + <0x80e8 0x18>, + <0x8120 0x18>, + <0x8030 0x38>; + reg-names = "mux", "pull", "pull-enable", "gpio"; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pinctrl_cbus 0 0 130>; }; + }; +}; - pwm_ef: pwm@86c0 { - compatible = "amlogic,meson8b-pwm"; - reg = <0xc11086c0 0x10>; - #pwm-cells = <3>; - status = "disabled"; - }; +&uart_AO { + clocks = <&clkc CLKID_CLK81>; +}; - pinctrl_cbus: pinctrl@c1109880 { - compatible = "amlogic,meson8b-cbus-pinctrl"; - reg = <0xc1109880 0x10>; - #address-cells = <1>; - #size-cells = <1>; - ranges; - - gpio: banks@c11080b0 { - reg = <0xc11080b0 0x28>, - <0xc11080e8 0x18>, - <0xc1108120 0x18>, - <0xc1108030 0x38>; - reg-names = "mux", "pull", "pull-enable", "gpio"; - gpio-controller; - #gpio-cells = <2>; - gpio-ranges = <&pinctrl_cbus 0 0 130>; - }; - }; +&uart_A { + clocks = <&clkc CLKID_CLK81>; +}; - pinctrl_aobus: pinctrl@c8100084 { - compatible = "amlogic,meson8b-aobus-pinctrl"; - reg = <0xc8100084 0xc>; - #address-cells = <1>; - #size-cells = <1>; - ranges; - - gpio_ao: ao-bank@c1108030 { - reg = <0xc8100014 0x4>, - <0xc810002c 0x4>, - <0xc8100024 0x8>; - reg-names = "mux", "pull", "gpio"; - gpio-controller; - #gpio-cells = <2>; - gpio-ranges = <&pinctrl_aobus 0 130 16>; - }; +&uart_B { + clocks = <&clkc CLKID_CLK81>; +}; - uart_ao_a_pins: uart_ao_a { - mux { - groups = "uart_tx_ao_a", "uart_rx_ao_a"; - function = "uart_ao"; - }; - }; - }; - }; -}; /* end of / */ +&uart_C { + clocks = <&clkc CLKID_CLK81>; +}; -- cgit v1.2.3 From bbe5b23dfdd346e782f8c56ab01bb3f5eaddd438 Mon Sep 17 00:00:00 2001 From: Carlo Caione Date: Mon, 17 Apr 2017 23:42:44 +0200 Subject: ARM: dts: meson: Extend L2 cache controller node for Meson8 and Meson8b This patch extends the L2 cache controller node for the Amlogic Meson8 and Meson8b SoCs with some missing parameters. These are taken from the Amlogic GPL kernel source. Signed-off-by: Carlo Caione [apply the change to Meson8 and Meson8b and updated description] Signed-off-by: Martin Blumenstingl Signed-off-by: Kevin Hilman --- arch/arm/boot/dts/meson8.dtsi | 6 ++++++ arch/arm/boot/dts/meson8b.dtsi | 6 ++++++ 2 files changed, 12 insertions(+) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/meson8.dtsi b/arch/arm/boot/dts/meson8.dtsi index 5eaaf067c76a..6993077331c7 100644 --- a/arch/arm/boot/dts/meson8.dtsi +++ b/arch/arm/boot/dts/meson8.dtsi @@ -188,6 +188,12 @@ clocks = <&clk81>; }; +&L2 { + arm,data-latency = <3 3 3>; + arm,tag-latency = <2 2 2>; + arm,filter-ranges = <0x100000 0xc0000000>; +}; + &spifc { clocks = <&clk81>; }; diff --git a/arch/arm/boot/dts/meson8b.dtsi b/arch/arm/boot/dts/meson8b.dtsi index ef9ac974111c..d9f116a418b2 100644 --- a/arch/arm/boot/dts/meson8b.dtsi +++ b/arch/arm/boot/dts/meson8b.dtsi @@ -171,6 +171,12 @@ }; }; +&L2 { + arm,data-latency = <3 3 3>; + arm,tag-latency = <2 2 2>; + arm,filter-ranges = <0x100000 0xc0000000>; +}; + &uart_AO { clocks = <&clkc CLKID_CLK81>; }; -- cgit v1.2.3 From 925b865f88182e47891cb9b9eb27db4e5a86fc6f Mon Sep 17 00:00:00 2001 From: Andrew Lunn Date: Fri, 26 May 2017 01:44:44 +0200 Subject: ARM: dts: vf610-zii: Add switch eeprom-length properties Two of the Ethernet switches on this board have EEPROMs connected. Add the eeprom-length property to the device tree, making it possible to access the EEPROM using ethtool -e. Signed-off-by: Andrew Lunn Signed-off-by: Shawn Guo --- arch/arm/boot/dts/vf610-zii-dev-rev-b.dts | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts b/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts index 37f95427616f..acdf12ad0622 100644 --- a/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts +++ b/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts @@ -78,6 +78,7 @@ interrupts = <27 IRQ_TYPE_LEVEL_LOW>; interrupt-controller; #interrupt-cells = <2>; + eeprom-length = <512>; ports { #address-cells = <1>; @@ -163,6 +164,7 @@ interrupts = <26 IRQ_TYPE_LEVEL_LOW>; interrupt-controller; #interrupt-cells = <2>; + eeprom-length = <512>; ports { #address-cells = <1>; -- cgit v1.2.3 From 0ac409a6cac35a8190f7c6fdbfc274603ee43e7f Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Thu, 25 May 2017 15:31:33 +0800 Subject: ARM: sun7i: a20: cubieboard2: Move usb_otg node for alphabetical ordering We want to keep node references in alphabetical order, except for instances where node must be #included first. Move the usb_otg node reference so that all references to non-AXP209 device nodes are in alphabetical order. Signed-off-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun7i-a20-cubieboard2.dts | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts index 7ac5bcc9f972..c21edd75d0b3 100644 --- a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts +++ b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts @@ -174,11 +174,6 @@ status = "okay"; }; -&usb_otg { - dr_mode = "otg"; - status = "okay"; -}; - #include "axp209.dtsi" ®_dcdc2 { @@ -220,6 +215,11 @@ status = "okay"; }; +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + &usbphy { pinctrl-names = "default"; pinctrl-0 = <&usb0_id_detect_pin>; -- cgit v1.2.3 From 6df31af7d827ab8dbcf0baec0411813d7a709150 Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Thu, 25 May 2017 15:31:34 +0800 Subject: ARM: sun7i: a20: cubieboard2: Enable AXP209's ACIN power supply The ACIN pins of the AXP209 PMIC on the Cubieboard 2 are tied to the DC jack on the board. Enable the ACIN power supply. Signed-off-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun7i-a20-cubieboard2.dts | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts index c21edd75d0b3..2a50207618cb 100644 --- a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts +++ b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts @@ -176,6 +176,10 @@ #include "axp209.dtsi" +&ac_power_supply { + status = "okay"; +}; + ®_dcdc2 { regulator-always-on; regulator-min-microvolt = <1000000>; -- cgit v1.2.3 From 17aafb5b336b5cb78973c290b12aa0bd239be7fe Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Thu, 25 May 2017 15:31:35 +0800 Subject: ARM: sun7i: a20: bananapi-m1-plus: Enable AXP209's ACIN power supply The ACIN pins of the AXP209 PMIC on the Bananapi M1 Plus are tied to the "power input" micro USB connector next to the SATA connector on the board. Enable the ACIN power supply. Signed-off-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts b/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts index 4c03cc3fd7b3..eb55e74232c9 100644 --- a/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts +++ b/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts @@ -144,6 +144,10 @@ #include "axp209.dtsi" +&ac_power_supply { + status = "okay"; +}; + &ir0 { pinctrl-names = "default"; pinctrl-0 = <&ir0_rx_pins_a>; -- cgit v1.2.3 From 2fb90080db2c76e2ffcce1b8b3867250091b4d65 Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Thu, 25 May 2017 15:31:36 +0800 Subject: ARM: sun4i: a10: cubieboard: Enable AXP209's ACIN power supply The ACIN pins of the AXP209 PMIC on the Cubieboard are tied to the DC jack on the board. Enable the ACIN power supply. Signed-off-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun4i-a10-cubieboard.dts | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts index a698a994e5ff..404ce7694899 100644 --- a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts +++ b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts @@ -182,6 +182,10 @@ #include "axp209.dtsi" +&ac_power_supply { + status = "okay"; +}; + ®_dcdc2 { regulator-always-on; regulator-min-microvolt = <1000000>; -- cgit v1.2.3 From c7b7158f397b6e2fc5cd13925b185502ca026158 Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Thu, 25 May 2017 15:31:37 +0800 Subject: ARM: sun6i: a31: hummingbird: Enable AXP221's ACIN power supply The ACIN pins of the AXP221 PMIC on the A31 Hummingbird are tied to the DC jack on the board through a 12V to 5V buck converter. Enable the ACIN power supply. Signed-off-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun6i-a31-hummingbird.dts | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/sun6i-a31-hummingbird.dts b/arch/arm/boot/dts/sun6i-a31-hummingbird.dts index 55607208468b..9ecb5f0b3f83 100644 --- a/arch/arm/boot/dts/sun6i-a31-hummingbird.dts +++ b/arch/arm/boot/dts/sun6i-a31-hummingbird.dts @@ -253,6 +253,10 @@ #include "axp22x.dtsi" +&ac_power_supply { + status = "okay"; +}; + ®_aldo1 { regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; -- cgit v1.2.3 From 3c0492811ef83b3dfed88a7c3fe759ac7ad0197f Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Thu, 25 May 2017 15:31:38 +0800 Subject: ARM: sun7i: a20: cubietruck: Tie AXP209's USB power supply to USB PHY The USB PHY can use either a GPIO pin or the PMIC's USB power supply to sense VBUS. Since both options are available on the Cubietruck, add the missing property for the USB power supply to the USB PHY node. The device tree provides all usable options. Ultimately, which method is used is up to the driver implementation. Signed-off-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun7i-a20-cubietruck.dts | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts index 8dbf732c7aa9..bb510187602c 100644 --- a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts +++ b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts @@ -336,6 +336,7 @@ pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>; usb0_id_det-gpios = <&pio 7 19 GPIO_ACTIVE_HIGH>; /* PH19 */ usb0_vbus_det-gpios = <&pio 7 22 GPIO_ACTIVE_HIGH>; /* PH22 */ + usb0_vbus_power-supply = <&usb_power_supply>; usb0_vbus-supply = <®_usb0_vbus>; usb1_vbus-supply = <®_usb1_vbus>; usb2_vbus-supply = <®_usb2_vbus>; -- cgit v1.2.3 From 45857ae954783bcbab6f67c2300b7d98d214c393 Mon Sep 17 00:00:00 2001 From: Sergey Matyukevich Date: Sun, 28 May 2017 13:30:26 +0300 Subject: ARM: dts: orange-pi-zero: add node for SPI NOR Add node for SPI NOR flash on orange-pi-zero board. Disable this node by default and leave it to users to enable it if their board has SPI NOR flash chip populated. SPI NOR flash was optional in the first production batch in Dec 2016. In later batches flash chip was pre-populated. However there should be quite a few boards around which do not have flash chip. Signed-off-by: Sergey Matyukevich Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts | 13 +++++++++++++ 1 file changed, 13 insertions(+) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts b/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts index 9e8b082c134f..0b8b969f7c64 100644 --- a/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts +++ b/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts @@ -143,6 +143,19 @@ status = "okay"; }; +&spi0 { + /* Disable SPI NOR by default: it optional on Orange Pi Zero boards */ + status = "disabled"; + + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "mxicy,mx25l1606e", "winbond,w25q128"; + reg = <0>; + spi-max-frequency = <40000000>; + }; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pins_a>; -- cgit v1.2.3 From 775448ce274a58bb8b5fa49795dc808446434dae Mon Sep 17 00:00:00 2001 From: Alexandre Bailon Date: Fri, 19 May 2017 15:33:36 +0200 Subject: ARM: dts: da850: Add CPPI 4.1 DMA to USB OTG controller This adds CPPI 4.1 DMA controller to USB OTG controller. Changes since v2: - Fixed the the property reg-names (had glue register defined) - Removed few useless property Signed-off-by: Alexandre Bailon Signed-off-by: Sekhar Nori --- arch/arm/boot/dts/da850.dtsi | 27 ++++++++++++++++++++++++++- 1 file changed, 26 insertions(+), 1 deletion(-) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi index 941d455000a7..0bd048e0049f 100644 --- a/arch/arm/boot/dts/da850.dtsi +++ b/arch/arm/boot/dts/da850.dtsi @@ -446,13 +446,38 @@ }; usb0: usb@200000 { compatible = "ti,da830-musb"; - reg = <0x200000 0x10000>; + reg = <0x200000 0x1000>; + ranges; interrupts = <58>; interrupt-names = "mc"; dr_mode = "otg"; phys = <&usb_phy 0>; phy-names = "usb-phy"; status = "disabled"; + + #address-cells = <1>; + #size-cells = <1>; + + dmas = <&cppi41dma 0 0 &cppi41dma 1 0 + &cppi41dma 2 0 &cppi41dma 3 0 + &cppi41dma 0 1 &cppi41dma 1 1 + &cppi41dma 2 1 &cppi41dma 3 1>; + dma-names = + "rx1", "rx2", "rx3", "rx4", + "tx1", "tx2", "tx3", "tx4"; + + cppi41dma: dma-controller@201000 { + compatible = "ti,da830-cppi41"; + reg = <0x201000 0x1000 + 0x202000 0x1000 + 0x204000 0x4000>; + reg-names = "controller", + "scheduler", "queuemgr"; + interrupts = <58>; + #dma-cells = <2>; + #dma-channels = <4>; + status = "okay"; + }; }; sata: sata@218000 { compatible = "ti,da850-ahci"; -- cgit v1.2.3 From 3c4ec0f9b3a1cd0365c33e53936274f81d536b94 Mon Sep 17 00:00:00 2001 From: Keerthy Date: Wed, 24 May 2017 19:31:41 +0530 Subject: ARM: dts: da850: Add interrupt-controller property to gpio node The gpio node has 144 gpios. Each gpio is capable of generating an interrupt. Hence add interrupt-controller property to the gpio node. With this in place one can use interrupts property in device tree to request for the gpio interrupts. Signed-off-by: Keerthy Signed-off-by: Sekhar Nori --- arch/arm/boot/dts/da850.dtsi | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi index 0bd048e0049f..af68ef7b0caa 100644 --- a/arch/arm/boot/dts/da850.dtsi +++ b/arch/arm/boot/dts/da850.dtsi @@ -528,6 +528,8 @@ ti,ngpio = <144>; ti,davinci-gpio-unbanked = <0>; status = "disabled"; + interrupt-controller; + #interrupt-cells = <2>; }; pinconf: pin-controller@22c00c { compatible = "ti,da850-pupd"; -- cgit v1.2.3 From 46992a17a853c537c77a99e67912c4f6317a71cb Mon Sep 17 00:00:00 2001 From: Uwe Kleine-König Date: Fri, 26 May 2017 20:06:07 +0200 Subject: ARM: dts: at91-sama5d4: use IRQ_TYPE_* to specify irq flags MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit According to the binding documentation and the source code the atmel-gpio controller takes IRQ_TYPE_* as its flags values, not GPIO_ACTIVE_*. This patch uses the right variable type which yields the same result when compiled. Note that this might be wrong and actually IRQ_TYPE_LEVEL_LOW is intended by the dt author. Signed-off-by: Uwe Kleine-König Acked-by: Marek Vasut Signed-off-by: Alexandre Belloni --- arch/arm/boot/dts/at91-sama5d4_ma5d4.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/at91-sama5d4_ma5d4.dtsi b/arch/arm/boot/dts/at91-sama5d4_ma5d4.dtsi index b5a5a91bc2ef..b813fdfa2842 100644 --- a/arch/arm/boot/dts/at91-sama5d4_ma5d4.dtsi +++ b/arch/arm/boot/dts/at91-sama5d4_ma5d4.dtsi @@ -75,7 +75,7 @@ reg = <0>; clocks = <&clk20m>; interrupt-parent = <&pioE>; - interrupts = <6 GPIO_ACTIVE_LOW>; + interrupts = <6 IRQ_TYPE_EDGE_RISING>; spi-max-frequency = <10000000>; }; @@ -84,7 +84,7 @@ reg = <1>; clocks = <&clk20m>; interrupt-parent = <&pioE>; - interrupts = <7 GPIO_ACTIVE_LOW>; + interrupts = <7 IRQ_TYPE_EDGE_RISING>; spi-max-frequency = <10000000>; }; }; -- cgit v1.2.3 From d9c41bf30cf8cea379f5947624e76c893791fec0 Mon Sep 17 00:00:00 2001 From: Boris Brezillon Date: Tue, 30 May 2017 11:20:52 +0200 Subject: ARM: dts: at91: Declare EBI/NAND controllers Declare new nodes for the EBI and NAND controllers embedded in various at91/sama5 SoCs. Signed-off-by: Boris Brezillon Signed-off-by: Alexandre Belloni --- arch/arm/boot/dts/at91sam9260.dtsi | 37 +++++++++ arch/arm/boot/dts/at91sam9261.dtsi | 32 ++++++++ arch/arm/boot/dts/at91sam9263.dtsi | 61 ++++++++++++++ arch/arm/boot/dts/at91sam9g45.dtsi | 35 ++++++++ arch/arm/boot/dts/at91sam9n12.dtsi | 42 ++++++++++ arch/arm/boot/dts/at91sam9rl.dtsi | 35 ++++++++ arch/arm/boot/dts/at91sam9x5.dtsi | 42 ++++++++++ arch/arm/boot/dts/sama5d2.dtsi | 53 ++++++++++++ arch/arm/boot/dts/sama5d3.dtsi | 113 ++++++++++++++++++++++++++ arch/arm/boot/dts/sama5d4.dtsi | 160 +++++++++++++++++++++++++++++++++++++ 10 files changed, 610 insertions(+) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/at91sam9260.dtsi b/arch/arm/boot/dts/at91sam9260.dtsi index 9e035b21e1b6..ab0e73374567 100644 --- a/arch/arm/boot/dts/at91sam9260.dtsi +++ b/arch/arm/boot/dts/at91sam9260.dtsi @@ -99,6 +99,16 @@ reg = <0xffffea00 0x200>; }; + smc: smc@ffffec00 { + compatible = "atmel,at91sam9260-smc", "syscon"; + reg = <0xffffec00 0x200>; + }; + + matrix: matrix@ffffee00 { + compatible = "atmel,at91sam9260-matrix", "syscon"; + reg = <0xffffee00 0x200>; + }; + pmc: pmc@fffffc00 { compatible = "atmel,at91sam9260-pmc", "syscon"; reg = <0xfffffc00 0x100>; @@ -1011,6 +1021,33 @@ clock-names = "ohci_clk", "hclk", "uhpck"; status = "disabled"; }; + + ebi: ebi@10000000 { + compatible = "atmel,at91sam9260-ebi"; + #address-cells = <2>; + #size-cells = <1>; + atmel,smc = <&smc>; + atmel,matrix = <&matrix>; + reg = <0x10000000 0x80000000>; + ranges = <0x0 0x0 0x10000000 0x10000000 + 0x1 0x0 0x20000000 0x10000000 + 0x2 0x0 0x30000000 0x10000000 + 0x3 0x0 0x40000000 0x10000000 + 0x4 0x0 0x50000000 0x10000000 + 0x5 0x0 0x60000000 0x10000000 + 0x6 0x0 0x70000000 0x10000000 + 0x7 0x0 0x80000000 0x10000000>; + clocks = <&mck>; + status = "disabled"; + + nand_controller: nand-controller { + compatible = "atmel,at91sam9260-nand-controller"; + #address-cells = <2>; + #size-cells = <1>; + ranges; + status = "disabled"; + }; + }; }; i2c-gpio-0 { diff --git a/arch/arm/boot/dts/at91sam9261.dtsi b/arch/arm/boot/dts/at91sam9261.dtsi index 7e80acda8f69..3ab0c21134f1 100644 --- a/arch/arm/boot/dts/at91sam9261.dtsi +++ b/arch/arm/boot/dts/at91sam9261.dtsi @@ -91,6 +91,33 @@ status = "disabled"; }; + ebi: ebi@10000000 { + compatible = "atmel,at91sam9261-ebi"; + #address-cells = <2>; + #size-cells = <1>; + atmel,smc = <&smc>; + atmel,matrix = <&matrix>; + reg = <0x10000000 0x80000000>; + ranges = <0x0 0x0 0x10000000 0x10000000 + 0x1 0x0 0x20000000 0x10000000 + 0x2 0x0 0x30000000 0x10000000 + 0x3 0x0 0x40000000 0x10000000 + 0x4 0x0 0x50000000 0x10000000 + 0x5 0x0 0x60000000 0x10000000 + 0x6 0x0 0x70000000 0x10000000 + 0x7 0x0 0x80000000 0x10000000>; + clocks = <&mck>; + status = "disabled"; + + nand_controller: nand-controller { + compatible = "atmel,at91sam9261-nand-controller"; + #address-cells = <2>; + #size-cells = <1>; + ranges; + status = "disabled"; + }; + }; + nand0: nand@40000000 { compatible = "atmel,at91rm9200-nand"; #address-cells = <1>; @@ -262,6 +289,11 @@ reg = <0xffffea00 0x200>; }; + smc: smc@ffffec00 { + compatible = "atmel,at91sam9260-smc", "syscon"; + reg = <0xffffec00 0x200>; + }; + matrix: matrix@ffffee00 { compatible = "atmel,at91sam9261-matrix", "syscon"; reg = <0xffffee00 0x200>; diff --git a/arch/arm/boot/dts/at91sam9263.dtsi b/arch/arm/boot/dts/at91sam9263.dtsi index a1888f6d892b..db9f3a02f2fa 100644 --- a/arch/arm/boot/dts/at91sam9263.dtsi +++ b/arch/arm/boot/dts/at91sam9263.dtsi @@ -361,11 +361,26 @@ reg = <0xffffe200 0x200>; }; + smc0: smc@ffffe400 { + compatible = "atmel,at91sam9260-smc", "syscon"; + reg = <0xffffe400 0x200>; + }; + ramc1: ramc@ffffe800 { compatible = "atmel,at91sam9260-sdramc"; reg = <0xffffe800 0x200>; }; + smc1: smc@ffffea00 { + compatible = "atmel,at91sam9260-smc", "syscon"; + reg = <0xffffea00 0x200>; + }; + + matrix: matrix@ffffec00 { + compatible = "atmel,at91sam9263-matrix", "syscon"; + reg = <0xffffec00 0x200>; + }; + pit: timer@fffffd30 { compatible = "atmel,at91sam9260-pit"; reg = <0xfffffd30 0xf>; @@ -1017,6 +1032,52 @@ clock-names = "ohci_clk", "hclk", "uhpck"; status = "disabled"; }; + + ebi0: ebi@10000000 { + compatible = "atmel,at91sam9263-ebi0"; + #address-cells = <2>; + #size-cells = <1>; + atmel,smc = <&smc0>; + atmel,matrix = <&matrix>; + reg = <0x10000000 0x80000000>; + ranges = <0x0 0x0 0x10000000 0x10000000 + 0x1 0x0 0x20000000 0x10000000 + 0x2 0x0 0x30000000 0x10000000 + 0x3 0x0 0x40000000 0x10000000 + 0x4 0x0 0x50000000 0x10000000 + 0x5 0x0 0x60000000 0x10000000>; + clocks = <&mck>; + status = "disabled"; + + nand_controller0: nand-controller { + compatible = "atmel,at91sam9260-nand-controller"; + #address-cells = <2>; + #size-cells = <1>; + ranges; + status = "disabled"; + }; + }; + + ebi1: ebi@70000000 { + compatible = "atmel,at91sam9263-ebi1"; + #address-cells = <2>; + #size-cells = <1>; + atmel,smc = <&smc1>; + atmel,matrix = <&matrix>; + reg = <0x80000000 0x20000000>; + ranges = <0x0 0x0 0x80000000 0x10000000 + 0x1 0x0 0x90000000 0x10000000>; + clocks = <&mck>; + status = "disabled"; + + nand_controller1: nand-controller { + compatible = "atmel,at91sam9260-nand-controller"; + #address-cells = <2>; + #size-cells = <1>; + ranges; + status = "disabled"; + }; + }; }; i2c-gpio-0 { diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi index e567d5fd3f9d..392dcfb79b57 100644 --- a/arch/arm/boot/dts/at91sam9g45.dtsi +++ b/arch/arm/boot/dts/at91sam9g45.dtsi @@ -113,6 +113,16 @@ clock-names = "ddrck"; }; + smc: smc@ffffe800 { + compatible = "atmel,at91sam9260-smc", "syscon"; + reg = <0xffffe800 0x200>; + }; + + matrix: matrix@ffffea00 { + compatible = "atmel,at91sam9g45-matrix", "syscon"; + reg = <0xffffea00 0x200>; + }; + pmc: pmc@fffffc00 { compatible = "atmel,at91sam9g45-pmc", "syscon"; reg = <0xfffffc00 0x100>; @@ -1314,6 +1324,31 @@ clock-names = "usb_clk", "ehci_clk"; status = "disabled"; }; + + ebi: ebi@10000000 { + compatible = "atmel,at91sam9g45-ebi"; + #address-cells = <2>; + #size-cells = <1>; + atmel,smc = <&smc>; + atmel,matrix = <&matrix>; + reg = <0x10000000 0x80000000>; + ranges = <0x0 0x0 0x10000000 0x10000000 + 0x1 0x0 0x20000000 0x10000000 + 0x2 0x0 0x30000000 0x10000000 + 0x3 0x0 0x40000000 0x10000000 + 0x4 0x0 0x50000000 0x10000000 + 0x5 0x0 0x60000000 0x10000000>; + clocks = <&mck>; + status = "disabled"; + + nand_controller: nand-controller { + compatible = "atmel,at91sam9g45-nand-controller"; + #address-cells = <2>; + #size-cells = <1>; + ranges; + status = "disabled"; + }; + }; }; i2c-gpio-0 { diff --git a/arch/arm/boot/dts/at91sam9n12.dtsi b/arch/arm/boot/dts/at91sam9n12.dtsi index f43d7695352d..df06a66ace07 100644 --- a/arch/arm/boot/dts/at91sam9n12.dtsi +++ b/arch/arm/boot/dts/at91sam9n12.dtsi @@ -89,6 +89,17 @@ atmel,external-irqs = <31>; }; + matrix: matrix@ffffde00 { + compatible = "atmel,at91sam9n12-matrix", "syscon"; + reg = <0xffffde00 0x100>; + }; + + pmecc: ecc-engine@ffffe000 { + compatible = "atmel,at91sam9g45-pmecc"; + reg = <0xffffe000 0x600>, + <0xffffe600 0x200>; + }; + ramc0: ramc@ffffe800 { compatible = "atmel,at91sam9g45-ddramc"; reg = <0xffffe800 0x200>; @@ -96,6 +107,11 @@ clock-names = "ddrck"; }; + smc: smc@ffffea00 { + compatible = "atmel,at91sam9260-smc", "syscon"; + reg = <0xffffea00 0x200>; + }; + pmc: pmc@fffffc00 { compatible = "atmel,at91sam9n12-pmc", "syscon"; reg = <0xfffffc00 0x200>; @@ -1028,6 +1044,32 @@ clock-names = "ohci_clk", "hclk", "uhpck"; status = "disabled"; }; + + ebi: ebi@10000000 { + compatible = "atmel,at91sam9x5-ebi"; + #address-cells = <2>; + #size-cells = <1>; + atmel,smc = <&smc>; + atmel,matrix = <&matrix>; + reg = <0x10000000 0x60000000>; + ranges = <0x0 0x0 0x10000000 0x10000000 + 0x1 0x0 0x20000000 0x10000000 + 0x2 0x0 0x30000000 0x10000000 + 0x3 0x0 0x40000000 0x10000000 + 0x4 0x0 0x50000000 0x10000000 + 0x5 0x0 0x60000000 0x10000000>; + clocks = <&mck>; + status = "disabled"; + + nand_controller: nand-controller { + compatible = "atmel,at91sam9g45-nand-controller"; + ecc-engine = <&pmecc>; + #address-cells = <2>; + #size-cells = <1>; + ranges; + status = "disabled"; + }; + }; }; i2c-gpio-0 { diff --git a/arch/arm/boot/dts/at91sam9rl.dtsi b/arch/arm/boot/dts/at91sam9rl.dtsi index f4c129a98f17..d373400cddcd 100644 --- a/arch/arm/boot/dts/at91sam9rl.dtsi +++ b/arch/arm/boot/dts/at91sam9rl.dtsi @@ -92,6 +92,31 @@ status = "disabled"; }; + ebi: ebi@10000000 { + compatible = "atmel,at91sam9rl-ebi"; + #address-cells = <2>; + #size-cells = <1>; + atmel,smc = <&smc>; + atmel,matrix = <&matrix>; + reg = <0x10000000 0x80000000>; + ranges = <0x0 0x0 0x10000000 0x10000000 + 0x1 0x0 0x20000000 0x10000000 + 0x2 0x0 0x30000000 0x10000000 + 0x3 0x0 0x40000000 0x10000000 + 0x4 0x0 0x50000000 0x10000000 + 0x5 0x0 0x60000000 0x10000000>; + clocks = <&mck>; + status = "disabled"; + + nand_controller: nand-controller { + compatible = "atmel,at91sam9g45-nand-controller"; + #address-cells = <2>; + #size-cells = <1>; + ranges; + status = "disabled"; + }; + }; + nand0: nand@40000000 { compatible = "atmel,at91rm9200-nand"; #address-cells = <1>; @@ -364,6 +389,16 @@ reg = <0xffffea00 0x200>; }; + smc: smc@ffffec00 { + compatible = "atmel,at91sam9260-smc", "syscon"; + reg = <0xffffec00 0x200>; + }; + + matrix: matrix@ffffee00 { + compatible = "atmel,at91sam9rl-matrix", "syscon"; + reg = <0xffffee00 0x200>; + }; + aic: interrupt-controller@fffff000 { #interrupt-cells = <3>; compatible = "atmel,at91rm9200-aic"; diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi index f66bae925705..7723e8b02880 100644 --- a/arch/arm/boot/dts/at91sam9x5.dtsi +++ b/arch/arm/boot/dts/at91sam9x5.dtsi @@ -97,6 +97,17 @@ atmel,external-irqs = <31>; }; + matrix: matrix@ffffde00 { + compatible = "atmel,at91sam9x5-matrix", "syscon"; + reg = <0xffffde00 0x100>; + }; + + pmecc: ecc-engine@ffffe000 { + compatible = "atmel,at91sam9g45-pmecc"; + reg = <0xffffe000 0x600>, + <0xffffe600 0x200>; + }; + ramc0: ramc@ffffe800 { compatible = "atmel,at91sam9g45-ddramc"; reg = <0xffffe800 0x200>; @@ -104,6 +115,11 @@ clock-names = "ddrck"; }; + smc: smc@ffffea00 { + compatible = "atmel,at91sam9260-smc", "syscon"; + reg = <0xffffea00 0x200>; + }; + pmc: pmc@fffffc00 { compatible = "atmel,at91sam9x5-pmc", "syscon"; reg = <0xfffffc00 0x200>; @@ -1236,6 +1252,32 @@ clock-names = "usb_clk", "ehci_clk"; status = "disabled"; }; + + ebi: ebi@10000000 { + compatible = "atmel,at91sam9x5-ebi"; + #address-cells = <2>; + #size-cells = <1>; + atmel,smc = <&smc>; + atmel,matrix = <&matrix>; + reg = <0x10000000 0x60000000>; + ranges = <0x0 0x0 0x10000000 0x10000000 + 0x1 0x0 0x20000000 0x10000000 + 0x2 0x0 0x30000000 0x10000000 + 0x3 0x0 0x40000000 0x10000000 + 0x4 0x0 0x50000000 0x10000000 + 0x5 0x0 0x60000000 0x10000000>; + clocks = <&mck>; + status = "disabled"; + + nand_controller: nand-controller { + compatible = "atmel,at91sam9g45-nand-controller"; + ecc-engine = <&pmecc>; + #address-cells = <2>; + #size-cells = <1>; + ranges; + status = "disabled"; + }; + }; }; i2c-gpio-0 { diff --git a/arch/arm/boot/dts/sama5d2.dtsi b/arch/arm/boot/dts/sama5d2.dtsi index ce95dcb8bdf9..e77fa36cb6f1 100644 --- a/arch/arm/boot/dts/sama5d2.dtsi +++ b/arch/arm/boot/dts/sama5d2.dtsi @@ -135,6 +135,12 @@ #size-cells = <1>; ranges; + nfc_sram: sram@00100000 { + compatible = "mmio-sram"; + no-memory-wc; + reg = <0x00100000 0x2400>; + }; + usb0: gadget@00300000 { #address-cells = <1>; #size-cells = <0>; @@ -291,6 +297,32 @@ cache-level = <2>; }; + ebi: ebi@10000000 { + compatible = "atmel,sama5d3-ebi"; + #address-cells = <2>; + #size-cells = <1>; + atmel,smc = <&hsmc>; + reg = <0x10000000 0x10000000 + 0x40000000 0x30000000>; + ranges = <0x0 0x0 0x10000000 0x10000000 + 0x1 0x0 0x60000000 0x10000000 + 0x2 0x0 0x70000000 0x10000000 + 0x3 0x0 0x80000000 0x10000000>; + clocks = <&mck>; + status = "disabled"; + + nand_controller: nand-controller { + compatible = "atmel,sama5d3-nand-controller"; + atmel,nfc-sram = <&nfc_sram>; + atmel,nfc-io = <&nfc_io>; + ecc-engine = <&pmecc>; + #address-cells = <2>; + #size-cells = <1>; + ranges; + status = "disabled"; + }; + }; + nand0: nand@80000000 { compatible = "atmel,sama5d2-nand"; #address-cells = <1>; @@ -347,6 +379,11 @@ status = "disabled"; }; + nfc_io: nfc-io@c0000000 { + compatible = "atmel,sama5d3-nfc-io", "syscon"; + reg = <0xc0000000 0x8000000>; + }; + apb { compatible = "simple-bus"; #address-cells = <1>; @@ -1010,6 +1047,22 @@ clock-names = "t0_clk", "slow_clk"; }; + hsmc: hsmc@f8014000 { + compatible = "atmel,sama5d3-smc", "syscon", "simple-mfd"; + reg = <0xf8014000 0x1000>; + interrupts = <5 IRQ_TYPE_LEVEL_HIGH 6>; + clocks = <&hsmc_clk>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + pmecc: ecc-engine@ffffc070 { + compatible = "atmel,sama5d2-pmecc"; + reg = <0xffffc070 0x490>, + <0xffffc500 0x100>; + }; + }; + pdmic: pdmic@f8018000 { compatible = "atmel,sama5d2-pdmic"; reg = <0xf8018000 0x124>; diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi index b06448ba6649..3925f83f58a6 100644 --- a/arch/arm/boot/dts/sama5d3.dtsi +++ b/arch/arm/boot/dts/sama5d3.dtsi @@ -429,6 +429,22 @@ clocks = <&trng_clk>; }; + hsmc: hsmc@ffffc000 { + compatible = "atmel,sama5d3-smc", "syscon", "simple-mfd"; + reg = <0xffffc000 0x1000>; + interrupts = <5 IRQ_TYPE_LEVEL_HIGH 6>; + clocks = <&hsmc_clk>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + pmecc: ecc-engine@ffffc070 { + compatible = "atmel,at91sam9g45-pmecc"; + reg = <0xffffc070 0x490>, + <0xffffc500 0x100>; + }; + }; + dma0: dma-controller@ffffe600 { compatible = "atmel,at91sam9g45-dma"; reg = <0xffffe600 0x200>; @@ -554,6 +570,66 @@ }; }; + ebi { + pinctrl_ebi_addr: ebi-addr-0 { + atmel,pins = + ; + }; + + pinctrl_ebi_nand_addr: ebi-addr-1 { + atmel,pins = + ; + }; + + pinctrl_ebi_cs0: ebi-cs0-0 { + atmel,pins = + ; + }; + + pinctrl_ebi_cs1: ebi-cs1-0 { + atmel,pins = + ; + }; + + pinctrl_ebi_cs2: ebi-cs2-0 { + atmel,pins = + ; + }; + + pinctrl_ebi_nwait: ebi-nwait-0 { + atmel,pins = + ; + }; + + pinctrl_ebi_nwr1_nbs1: ebi-nwr1-nbs1-0 { + atmel,pins = + ; + }; + }; + i2c0 { pinctrl_i2c0: i2c0-0 { atmel,pins = @@ -1326,6 +1402,12 @@ }; }; + nfc_sram: sram@200000 { + compatible = "mmio-sram"; + no-memory-wc; + reg = <0x200000 0x2400>; + }; + usb0: gadget@00500000 { #address-cells = <1>; #size-cells = <0>; @@ -1461,6 +1543,32 @@ status = "disabled"; }; + ebi: ebi@10000000 { + compatible = "atmel,sama5d3-ebi"; + #address-cells = <2>; + #size-cells = <1>; + atmel,smc = <&hsmc>; + reg = <0x10000000 0x10000000 + 0x40000000 0x30000000>; + ranges = <0x0 0x0 0x10000000 0x10000000 + 0x1 0x0 0x40000000 0x10000000 + 0x2 0x0 0x50000000 0x10000000 + 0x3 0x0 0x60000000 0x10000000>; + clocks = <&mck>; + status = "disabled"; + + nand_controller: nand-controller { + compatible = "atmel,sama5d3-nand-controller"; + atmel,nfc-sram = <&nfc_sram>; + atmel,nfc-io = <&nfc_io>; + ecc-engine = <&pmecc>; + #address-cells = <2>; + #size-cells = <1>; + ranges; + status = "disabled"; + }; + }; + nand0: nand@60000000 { compatible = "atmel,at91rm9200-nand"; #address-cells = <1>; @@ -1492,5 +1600,10 @@ clocks = <&hsmc_clk>; }; }; + + nfc_io: nfc-io@70000000 { + compatible = "atmel,sama5d3-nfc-io", "syscon"; + reg = <0x70000000 0x8000000>; + }; }; }; diff --git a/arch/arm/boot/dts/sama5d4.dtsi b/arch/arm/boot/dts/sama5d4.dtsi index d3889c9d25a9..de6bcff87745 100644 --- a/arch/arm/boot/dts/sama5d4.dtsi +++ b/arch/arm/boot/dts/sama5d4.dtsi @@ -124,6 +124,12 @@ #size-cells = <1>; ranges; + nfc_sram: sram@100000 { + compatible = "mmio-sram"; + no-memory-wc; + reg = <0x100000 0x2400>; + }; + usb0: gadget@00400000 { #address-cells = <1>; #size-cells = <0>; @@ -280,6 +286,32 @@ cache-level = <2>; }; + ebi: ebi@10000000 { + compatible = "atmel,sama5d3-ebi"; + #address-cells = <2>; + #size-cells = <1>; + atmel,smc = <&hsmc>; + reg = <0x10000000 0x10000000 + 0x60000000 0x28000000>; + ranges = <0x0 0x0 0x10000000 0x10000000 + 0x1 0x0 0x60000000 0x10000000 + 0x2 0x0 0x70000000 0x10000000 + 0x3 0x0 0x80000000 0x8000000>; + clocks = <&mck>; + status = "disabled"; + + nand_controller: nand-controller { + compatible = "atmel,sama5d3-nand-controller"; + atmel,nfc-sram = <&nfc_sram>; + atmel,nfc-io = <&nfc_io>; + ecc-engine = <&pmecc>; + #address-cells = <2>; + #size-cells = <1>; + ranges; + status = "disabled"; + }; + }; + nand0: nand@80000000 { compatible = "atmel,sama5d4-nand", "atmel,at91rm9200-nand"; #address-cells = <1>; @@ -311,6 +343,11 @@ }; }; + nfc_io: nfc-io@90000000 { + compatible = "atmel,sama5d3-nfc-io", "syscon"; + reg = <0x90000000 0x8000000>; + }; + apb { compatible = "simple-bus"; #address-cells = <1>; @@ -1287,6 +1324,22 @@ status = "okay"; }; + hsmc: smc@fc05c000 { + compatible = "atmel,sama5d3-smc", "syscon", "simple-mfd"; + reg = <0xfc05c000 0x1000>; + interrupts = <22 IRQ_TYPE_LEVEL_HIGH 6>; + clocks = <&hsmc_clk>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + pmecc: ecc-engine@ffffc070 { + compatible = "atmel,sama5d4-pmecc"; + reg = <0xfc05c070 0x490>, + <0xfc05c500 0x100>; + }; + }; + rstc@fc068600 { compatible = "atmel,sama5d3-rstc", "atmel,at91sam9g45-rstc"; reg = <0xfc068600 0x10>; @@ -1447,6 +1500,113 @@ }; }; + ebi { + pinctrl_ebi_addr: ebi-addr-0 { + atmel,pins = + ; + }; + + pinctrl_ebi_nand_addr: ebi-addr-1 { + atmel,pins = + ; + }; + + pinctrl_ebi_cs0: ebi-cs0-0 { + atmel,pins = + ; + }; + + pinctrl_ebi_cs1: ebi-cs1-0 { + atmel,pins = + ; + }; + + pinctrl_ebi_cs2: ebi-cs2-0 { + atmel,pins = + ; + }; + + pinctrl_ebi_cs3: ebi-cs3-0 { + atmel,pins = + ; + }; + + pinctrl_ebi_data_0_7: ebi-data-lsb-0 { + atmel,pins = + ; + }; + + pinctrl_ebi_data_8_15: ebi-data-msb-0 { + atmel,pins = + ; + }; + + pinctrl_ebi_nandrdy: ebi-nandrdy-0 { + atmel,pins = + ; + }; + + pinctrl_ebi_nrd_nandoe: ebi-nrd-nandoe-0 { + atmel,pins = + ; + }; + + pinctrl_ebi_nwait: ebi-nwait-0 { + atmel,pins = + ; + }; + + pinctrl_ebi_nwe_nandwe: ebi-nwe-nandwe-0 { + atmel,pins = + ; + }; + + pinctrl_ebi_nwr1_nbs1: ebi-nwr1-nbs1-0 { + atmel,pins = + ; + }; + }; + i2c0 { pinctrl_i2c0: i2c0-0 { atmel,pins = -- cgit v1.2.3 From 1004a2977bdc7566bca87c565541c3232ed467c4 Mon Sep 17 00:00:00 2001 From: Boris Brezillon Date: Tue, 30 May 2017 11:20:53 +0200 Subject: ARM: dts: at91: Switch to the new NAND bindings Use the new EBI/NAND bindings to declare NAND chips and remove old NAND nodes along the way. Note that we keep using old bindings in at91rm9200.dtsi because this SoC is not supported by the EBI driver. Signed-off-by: Boris Brezillon Tested-by: Peter Rosin Signed-off-by: Alexandre Belloni --- arch/arm/boot/dts/aks-cdu.dts | 56 ++++++++------- arch/arm/boot/dts/animeo_ip.dts | 53 +++++++++----- arch/arm/boot/dts/at91-cosino.dtsi | 83 ++++++++++++++-------- arch/arm/boot/dts/at91-kizbox.dts | 42 +++++++++--- arch/arm/boot/dts/at91-kizbox2.dts | 45 ++++++++---- arch/arm/boot/dts/at91-kizboxmini.dts | 52 +++++++++++--- arch/arm/boot/dts/at91-linea.dtsi | 25 +++++-- arch/arm/boot/dts/at91-qil_a9260.dts | 103 ++++++++++++++++------------ arch/arm/boot/dts/at91-sama5d3_xplained.dts | 97 +++++++++++++++----------- arch/arm/boot/dts/at91-sama5d4_xplained.dts | 83 +++++++++++++--------- arch/arm/boot/dts/at91-sama5d4ek.dts | 83 +++++++++++++--------- arch/arm/boot/dts/at91-tse850-3.dts | 70 ++++++++++--------- arch/arm/boot/dts/at91sam9260.dtsi | 28 ++------ arch/arm/boot/dts/at91sam9261.dtsi | 24 ++----- arch/arm/boot/dts/at91sam9261ek.dts | 83 +++++++++++++--------- arch/arm/boot/dts/at91sam9263.dtsi | 28 ++------ arch/arm/boot/dts/at91sam9263ek.dts | 103 ++++++++++++++++------------ arch/arm/boot/dts/at91sam9g20ek_common.dtsi | 103 ++++++++++++++++------------ arch/arm/boot/dts/at91sam9g45.dtsi | 29 ++------ arch/arm/boot/dts/at91sam9m10g45ek.dts | 49 +++++++++---- arch/arm/boot/dts/at91sam9n12.dtsi | 32 ++------- arch/arm/boot/dts/at91sam9n12ek.dts | 26 +++++-- arch/arm/boot/dts/at91sam9rl.dtsi | 42 ++++-------- arch/arm/boot/dts/at91sam9rlek.dts | 85 ++++++++++++++--------- arch/arm/boot/dts/at91sam9x5.dtsi | 92 ++++++++++++------------- arch/arm/boot/dts/at91sam9x5cm.dtsi | 83 ++++++++++++++-------- arch/arm/boot/dts/ethernut5.dts | 47 ++++++++----- arch/arm/boot/dts/ge863-pro3.dtsi | 41 ++++++++--- arch/arm/boot/dts/pm9g45.dts | 99 ++++++++++++++------------ arch/arm/boot/dts/sama5d3.dtsi | 32 --------- arch/arm/boot/dts/sama5d3xcm.dtsi | 76 ++++++++++++-------- arch/arm/boot/dts/sama5d3xcm_cmp.dtsi | 77 +++++++++++++-------- arch/arm/boot/dts/sama5d4.dtsi | 31 --------- arch/arm/boot/dts/tny_a9260_common.dtsi | 89 ++++++++++++++---------- arch/arm/boot/dts/tny_a9263.dts | 103 ++++++++++++++++------------ arch/arm/boot/dts/usb_a9260_common.dtsi | 103 ++++++++++++++++------------ arch/arm/boot/dts/usb_a9263.dts | 103 ++++++++++++++++------------ 37 files changed, 1368 insertions(+), 1032 deletions(-) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/aks-cdu.dts b/arch/arm/boot/dts/aks-cdu.dts index 5b1bf92d927c..888bfcd4a402 100644 --- a/arch/arm/boot/dts/aks-cdu.dts +++ b/arch/arm/boot/dts/aks-cdu.dts @@ -62,32 +62,36 @@ status = "okay"; }; - nand0: nand@40000000 { - nand-bus-width = <8>; - nand-ecc-mode = "soft"; - nand-on-flash-bbt; - status = "okay"; - - bootstrap@0 { - label = "bootstrap"; - reg = <0x0 0x40000>; - }; - - uboot@40000 { - label = "uboot"; - reg = <0x40000 0x80000>; - }; - ubootenv@c0000 { - label = "ubootenv"; - reg = <0xc0000 0x40000>; - }; - kernel@100000 { - label = "kernel"; - reg = <0x100000 0x400000>; - }; - rootfs@500000 { - label = "rootfs"; - reg = <0x500000 0x7b00000>; + ebi: ebi@10000000 { + nand_controller: nand-controller { + nand: nand@3 { + partitions { + bootstrap@0 { + label = "bootstrap"; + reg = <0x0 0x40000>; + }; + + uboot@40000 { + label = "uboot"; + reg = <0x40000 0x80000>; + }; + + ubootenv@c0000 { + label = "ubootenv"; + reg = <0xc0000 0x40000>; + }; + + kernel@100000 { + label = "kernel"; + reg = <0x100000 0x400000>; + }; + + rootfs@500000 { + label = "rootfs"; + reg = <0x500000 0x7b00000>; + }; + }; + }; }; }; }; diff --git a/arch/arm/boot/dts/animeo_ip.dts b/arch/arm/boot/dts/animeo_ip.dts index 9cc372b9fb9b..26ade8c0a960 100644 --- a/arch/arm/boot/dts/animeo_ip.dts +++ b/arch/arm/boot/dts/animeo_ip.dts @@ -83,25 +83,44 @@ }; }; - nand0: nand@40000000 { - nand-bus-width = <8>; - nand-ecc-mode = "soft"; - nand-on-flash-bbt; + ebi: ebi@10000000 { status = "okay"; - barebox@0 { - label = "barebox"; - reg = <0x0 0x58000>; - }; - - u_boot_env@58000 { - label = "u_boot_env"; - reg = <0x58000 0x8000>; - }; - - ubi@60000 { - label = "ubi"; - reg = <0x60000 0x1FA0000>; + nand_controller: nand-controller { + status = "okay"; + pinctrl-0 = <&pinctrl_nand_cs &pinctrl_nand_rb>; + pinctrl-names = "default"; + + nand@3 { + reg = <0x3 0x0 0x800000>; + rb-gpios = <&pioC 13 GPIO_ACTIVE_HIGH>; + cs-gpios = <&pioC 14 GPIO_ACTIVE_HIGH>; + nand-bus-width = <8>; + nand-ecc-mode = "soft"; + nand-on-flash-bbt; + label = "atmel_nand"; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + barebox@0 { + label = "barebox"; + reg = <0x0 0x58000>; + }; + + u_boot_env@58000 { + label = "u_boot_env"; + reg = <0x58000 0x8000>; + }; + + ubi@60000 { + label = "ubi"; + reg = <0x60000 0x1FA0000>; + }; + }; + }; }; }; diff --git a/arch/arm/boot/dts/at91-cosino.dtsi b/arch/arm/boot/dts/at91-cosino.dtsi index 02d8ef43de3a..89cde175154e 100644 --- a/arch/arm/boot/dts/at91-cosino.dtsi +++ b/arch/arm/boot/dts/at91-cosino.dtsi @@ -82,38 +82,61 @@ }; }; - nand0: nand@40000000 { - nand-bus-width = <8>; - nand-ecc-mode = "hw"; - atmel,has-pmecc; /* Enable PMECC */ - atmel,pmecc-cap = <4>; - atmel,pmecc-sector-size = <512>; - nand-on-flash-bbt; + ebi: ebi@10000000 { + pinctrl-0 = <&pinctrl_ebi_addr_nand + &pinctrl_ebi_data_0_7>; + pinctrl-names = "default"; status = "okay"; - at91bootstrap@0 { - label = "at91bootstrap"; - reg = <0x0 0x40000>; - }; - - uboot@40000 { - label = "u-boot"; - reg = <0x40000 0x80000>; - }; - - ubootenv@c0000 { - label = "U-Boot Env"; - reg = <0xc0000 0x140000>; - }; - - kernel@200000 { - label = "kernel"; - reg = <0x200000 0x600000>; - }; - - rootfs@800000 { - label = "rootfs"; - reg = <0x800000 0x0f800000>; + nand_controller: nand-controller { + status = "okay"; + pinctrl-0 = <&pinctrl_nand_oe_we + &pinctrl_nand_cs + &pinctrl_nand_rb>; + pinctrl-names = "default"; + + nand@3 { + reg = <0x3 0x0 0x800000>; + rb-gpios = <&pioD 5 GPIO_ACTIVE_HIGH>; + cs-gpios = <&pioD 4 GPIO_ACTIVE_HIGH>; + nand-bus-width = <8>; + nand-ecc-mode = "hw"; + nand-ecc-strength = <4>; + nand-ecc-step-size = <512>; + nand-on-flash-bbt; + label = "atmel_nand"; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + at91bootstrap@0 { + label = "at91bootstrap"; + reg = <0x0 0x40000>; + }; + + uboot@40000 { + label = "u-boot"; + reg = <0x40000 0x80000>; + }; + + ubootenv@c0000 { + label = "U-Boot Env"; + reg = <0xc0000 0x140000>; + }; + + kernel@200000 { + label = "kernel"; + reg = <0x200000 0x600000>; + }; + + rootfs@800000 { + label = "rootfs"; + reg = <0x800000 0x0f800000>; + }; + }; + }; }; }; }; diff --git a/arch/arm/boot/dts/at91-kizbox.dts b/arch/arm/boot/dts/at91-kizbox.dts index b4f147c193fd..1f31df846d61 100644 --- a/arch/arm/boot/dts/at91-kizbox.dts +++ b/arch/arm/boot/dts/at91-kizbox.dts @@ -59,19 +59,39 @@ status = "okay"; }; - nand0: nand@40000000 { - nand-bus-width = <8>; - nand-ecc-mode = "soft"; + ebi: ebi@10000000 { status = "okay"; - bootstrap@0 { - label = "bootstrap"; - reg = <0x0 0x20000>; - }; - - ubi@20000 { - label = "ubi"; - reg = <0x20000 0x7fe0000>; + nand_controller: nand-controller { + status = "okay"; + pinctrl-0 = <&pinctrl_nand_cs &pinctrl_nand_rb>; + pinctrl-names = "default"; + + nand@3 { + reg = <0x3 0x0 0x800000>; + rb-gpios = <&pioC 13 GPIO_ACTIVE_HIGH>; + cs-gpios = <&pioC 14 GPIO_ACTIVE_HIGH>; + nand-bus-width = <8>; + nand-ecc-mode = "soft"; + nand-on-flash-bbt; + label = "atmel_nand"; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + bootstrap@0 { + label = "bootstrap"; + reg = <0x0 0x20000>; + }; + + ubi@20000 { + label = "ubi"; + reg = <0x20000 0x7fe0000>; + }; + }; + }; }; }; }; diff --git a/arch/arm/boot/dts/at91-kizbox2.dts b/arch/arm/boot/dts/at91-kizbox2.dts index 50a14568f094..4372c0287c1c 100644 --- a/arch/arm/boot/dts/at91-kizbox2.dts +++ b/arch/arm/boot/dts/at91-kizbox2.dts @@ -141,23 +141,40 @@ status = "okay"; }; - nand0: nand@60000000 { - nand-bus-width = <8>; - nand-ecc-mode = "hw"; - atmel,has-pmecc; - atmel,pmecc-cap = <4>; - atmel,pmecc-sector-size = <512>; - nand-on-flash-bbt; + ebi: ebi@10000000 { + pinctrl-0 = <&pinctrl_ebi_nand_addr>; + pinctrl-names = "default"; status = "okay"; - bootstrap@0 { - label = "bootstrap"; - reg = <0x0 0x20000>; - }; + nand_controller: nand-controller { + status = "okay"; + + nand@3 { + reg = <0x3 0x0 0x2>; + atmel,rb = <0>; + nand-bus-width = <8>; + nand-ecc-mode = "hw"; + nand-ecc-strength = <4>; + nand-ecc-step-size = <512>; + nand-on-flash-bbt; + label = "atmel_nand"; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + bootstrap@0 { + label = "bootstrap"; + reg = <0x0 0x20000>; + }; - ubi@20000 { - label = "ubi"; - reg = <0x20000 0x7fe0000>; + ubi@20000 { + label = "ubi"; + reg = <0x20000 0x7fe0000>; + }; + }; + }; }; }; }; diff --git a/arch/arm/boot/dts/at91-kizboxmini.dts b/arch/arm/boot/dts/at91-kizboxmini.dts index 9682d105d4d8..33238fcb6d0b 100644 --- a/arch/arm/boot/dts/at91-kizboxmini.dts +++ b/arch/arm/boot/dts/at91-kizboxmini.dts @@ -68,6 +68,49 @@ status = "okay"; }; + ebi: ebi@10000000 { + pinctrl-0 = <&pinctrl_ebi_addr_nand + &pinctrl_ebi_data_0_7>; + pinctrl-names = "default"; + status = "okay"; + + nand_controller: nand-controller { + status = "okay"; + pinctrl-0 = <&pinctrl_nand_oe_we + &pinctrl_nand_cs + &pinctrl_nand_rb>; + pinctrl-names = "default"; + + nand@3 { + reg = <0x3 0x0 0x800000>; + rb-gpios = <&pioD 5 GPIO_ACTIVE_HIGH>; + cs-gpios = <&pioD 4 GPIO_ACTIVE_HIGH>; + nand-bus-width = <8>; + nand-ecc-mode = "hw"; + nand-ecc-strength = <4>; + nand-ecc-step-size = <512>; + nand-on-flash-bbt; + label = "atmel_nand"; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + bootstrap@0 { + label = "bootstrap"; + reg = <0x0 0x20000>; + }; + + ubi@20000 { + label = "ubi"; + reg = <0x20000 0x7fe0000>; + }; + }; + }; + }; + }; + nand0: nand@40000000 { nand-bus-width = <8>; nand-ecc-mode = "hw"; @@ -77,15 +120,6 @@ nand-on-flash-bbt; status = "okay"; - bootstrap@0 { - label = "bootstrap"; - reg = <0x0 0x20000>; - }; - - ubi@20000 { - label = "ubi"; - reg = <0x20000 0x7fe0000>; - }; }; }; diff --git a/arch/arm/boot/dts/at91-linea.dtsi b/arch/arm/boot/dts/at91-linea.dtsi index 9bf9aaeff3e8..87e5090fb4c4 100644 --- a/arch/arm/boot/dts/at91-linea.dtsi +++ b/arch/arm/boot/dts/at91-linea.dtsi @@ -37,13 +37,24 @@ }; }; -&nand0 { +&ebi { + pinctrl-0 = <&pinctrl_ebi_nand_addr>; + pinctrl-names = "default"; status = "okay"; +}; + - nand-bus-width = <8>; - nand-ecc-mode = "hw"; - atmel,has-pmecc; - atmel,pmecc-cap = <4>; - atmel,pmecc-sector-size = <512>; - nand-on-flash-bbt; +&nand_controller { + status = "okay"; + + nand: nand@3 { + reg = <0x3 0x0 0x2>; + atmel,rb = <0>; + nand-bus-width = <8>; + nand-ecc-mode = "hw"; + nand-ecc-strength = <4>; + nand-ecc-step-size = <512>; + nand-on-flash-bbt; + label = "atmel_nand"; + }; }; diff --git a/arch/arm/boot/dts/at91-qil_a9260.dts b/arch/arm/boot/dts/at91-qil_a9260.dts index 8f019184fccf..f46352790a41 100644 --- a/arch/arm/boot/dts/at91-qil_a9260.dts +++ b/arch/arm/boot/dts/at91-qil_a9260.dts @@ -107,50 +107,69 @@ status = "okay"; }; - nand0: nand@40000000 { - nand-bus-width = <8>; - nand-ecc-mode = "soft"; - nand-on-flash-bbt; + ebi: ebi@10000000 { status = "okay"; - at91bootstrap@0 { - label = "at91bootstrap"; - reg = <0x0 0x20000>; - }; - - barebox@20000 { - label = "barebox"; - reg = <0x20000 0x40000>; - }; - - bareboxenv@60000 { - label = "bareboxenv"; - reg = <0x60000 0x20000>; - }; - - bareboxenv2@80000 { - label = "bareboxenv2"; - reg = <0x80000 0x20000>; - }; - - oftree@a0000 { - label = "oftree"; - reg = <0xa0000 0x20000>; - }; - - kernel@c0000 { - label = "kernel"; - reg = <0xc0000 0x400000>; - }; - - rootfs@4c0000 { - label = "rootfs"; - reg = <0x4c0000 0x7800000>; - }; - - data@7cc0000 { - label = "data"; - reg = <0x7cc0000 0x8340000>; + nand_controller: nand-controller { + status = "okay"; + pinctrl-0 = <&pinctrl_nand_cs &pinctrl_nand_rb>; + pinctrl-names = "default"; + + nand@3 { + reg = <0x3 0x0 0x800000>; + rb-gpios = <&pioC 13 GPIO_ACTIVE_HIGH>; + cs-gpios = <&pioC 14 GPIO_ACTIVE_HIGH>; + nand-bus-width = <8>; + nand-ecc-mode = "soft"; + nand-on-flash-bbt; + label = "atmel_nand"; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + at91bootstrap@0 { + label = "at91bootstrap"; + reg = <0x0 0x20000>; + }; + + barebox@20000 { + label = "barebox"; + reg = <0x20000 0x40000>; + }; + + bareboxenv@60000 { + label = "bareboxenv"; + reg = <0x60000 0x20000>; + }; + + bareboxenv2@80000 { + label = "bareboxenv2"; + reg = <0x80000 0x20000>; + }; + + oftree@a0000 { + label = "oftree"; + reg = <0xa0000 0x20000>; + }; + + kernel@c0000 { + label = "kernel"; + reg = <0xc0000 0x400000>; + }; + + rootfs@4c0000 { + label = "rootfs"; + reg = <0x4c0000 0x7800000>; + }; + + data@7cc0000 { + label = "data"; + reg = <0x7cc0000 0x8340000>; + }; + }; + }; }; }; }; diff --git a/arch/arm/boot/dts/at91-sama5d3_xplained.dts b/arch/arm/boot/dts/at91-sama5d3_xplained.dts index 5a53fcf542ab..3af088d2cba7 100644 --- a/arch/arm/boot/dts/at91-sama5d3_xplained.dts +++ b/arch/arm/boot/dts/at91-sama5d3_xplained.dts @@ -235,46 +235,6 @@ }; }; - nand0: nand@60000000 { - nand-bus-width = <8>; - nand-ecc-mode = "hw"; - atmel,has-pmecc; - atmel,pmecc-cap = <4>; - atmel,pmecc-sector-size = <512>; - nand-on-flash-bbt; - status = "okay"; - - at91bootstrap@0 { - label = "at91bootstrap"; - reg = <0x0 0x40000>; - }; - - bootloader@40000 { - label = "bootloader"; - reg = <0x40000 0x80000>; - }; - - bootloaderenv@c0000 { - label = "bootloader env"; - reg = <0xc0000 0xc0000>; - }; - - dtb@180000 { - label = "device tree"; - reg = <0x180000 0x80000>; - }; - - kernel@200000 { - label = "kernel"; - reg = <0x200000 0x600000>; - }; - - rootfs@800000 { - label = "rootfs"; - reg = <0x800000 0x0f800000>; - }; - }; - usb0: gadget@00500000 { atmel,vbus-gpio = <&pioE 9 GPIO_ACTIVE_HIGH>; /* PE9, conflicts with A9 */ pinctrl-names = "default"; @@ -294,6 +254,63 @@ usb2: ehci@00700000 { status = "okay"; }; + + ebi: ebi@10000000 { + pinctrl-0 = <&pinctrl_ebi_nand_addr>; + pinctrl-names = "default"; + status = "okay"; + + nand_controller: nand-controller { + status = "okay"; + + nand@3 { + reg = <0x3 0x0 0x2>; + atmel,rb = <0>; + nand-bus-width = <8>; + nand-ecc-mode = "hw"; + nand-ecc-strength = <4>; + nand-ecc-step-size = <512>; + nand-on-flash-bbt; + label = "atmel_nand"; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + at91bootstrap@0 { + label = "at91bootstrap"; + reg = <0x0 0x40000>; + }; + + bootloader@40000 { + label = "bootloader"; + reg = <0x40000 0x80000>; + }; + + bootloaderenv@c0000 { + label = "bootloader env"; + reg = <0xc0000 0xc0000>; + }; + + dtb@180000 { + label = "device tree"; + reg = <0x180000 0x80000>; + }; + + kernel@200000 { + label = "kernel"; + reg = <0x200000 0x600000>; + }; + + rootfs@800000 { + label = "rootfs"; + reg = <0x800000 0x0f800000>; + }; + }; + }; + }; + }; }; vcc_mmc0_reg: fixedregulator_mmc0 { diff --git a/arch/arm/boot/dts/at91-sama5d4_xplained.dts b/arch/arm/boot/dts/at91-sama5d4_xplained.dts index 5ab14cedb1db..cf712444b2c2 100644 --- a/arch/arm/boot/dts/at91-sama5d4_xplained.dts +++ b/arch/arm/boot/dts/at91-sama5d4_xplained.dts @@ -190,41 +190,60 @@ status = "okay"; }; - nand0: nand@80000000 { - nand-bus-width = <8>; - nand-ecc-mode = "hw"; - nand-on-flash-bbt; - atmel,has-pmecc; + ebi: ebi@10000000 { + pinctrl-0 = <&pinctrl_ebi_cs3 &pinctrl_ebi_nrd_nandoe + &pinctrl_ebi_nwe_nandwe &pinctrl_ebi_nandrdy + &pinctrl_ebi_data_0_7 &pinctrl_ebi_nand_addr>; + pinctrl-names = "default"; status = "okay"; - at91bootstrap@0 { - label = "at91bootstrap"; - reg = <0x0 0x40000>; - }; - - bootloader@40000 { - label = "bootloader"; - reg = <0x40000 0x80000>; - }; - - bootloaderenv@c0000 { - label = "bootloader env"; - reg = <0xc0000 0xc0000>; - }; - - dtb@180000 { - label = "device tree"; - reg = <0x180000 0x80000>; - }; - - kernel@200000 { - label = "kernel"; - reg = <0x200000 0x600000>; - }; + nand_controller: nand-controller { + status = "okay"; - rootfs@800000 { - label = "rootfs"; - reg = <0x800000 0x0f800000>; + nand@3 { + reg = <0x3 0x0 0x2>; + atmel,rb = <0>; + nand-bus-width = <8>; + nand-ecc-mode = "hw"; + nand-on-flash-bbt; + label = "atmel_nand"; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + at91bootstrap@0 { + label = "at91bootstrap"; + reg = <0x0 0x40000>; + }; + + bootloader@40000 { + label = "bootloader"; + reg = <0x40000 0x80000>; + }; + + bootloaderenv@c0000 { + label = "bootloader env"; + reg = <0xc0000 0xc0000>; + }; + + dtb@180000 { + label = "device tree"; + reg = <0x180000 0x80000>; + }; + + kernel@200000 { + label = "kernel"; + reg = <0x200000 0x600000>; + }; + + rootfs@800000 { + label = "rootfs"; + reg = <0x800000 0x0f800000>; + }; + }; + }; }; }; }; diff --git a/arch/arm/boot/dts/at91-sama5d4ek.dts b/arch/arm/boot/dts/at91-sama5d4ek.dts index f8b96cef5e1a..bae5248f126e 100644 --- a/arch/arm/boot/dts/at91-sama5d4ek.dts +++ b/arch/arm/boot/dts/at91-sama5d4ek.dts @@ -236,41 +236,60 @@ status = "okay"; }; - nand0: nand@80000000 { - nand-bus-width = <8>; - nand-ecc-mode = "hw"; - nand-on-flash-bbt; - atmel,has-pmecc; + ebi: ebi@10000000 { + pinctrl-0 = <&pinctrl_ebi_cs3 &pinctrl_ebi_nrd_nandoe + &pinctrl_ebi_nwe_nandwe &pinctrl_ebi_nandrdy + &pinctrl_ebi_data_0_7 &pinctrl_ebi_nand_addr>; + pinctrl-names = "default"; status = "okay"; - at91bootstrap@0 { - label = "at91bootstrap"; - reg = <0x0 0x40000>; - }; - - bootloader@40000 { - label = "bootloader"; - reg = <0x40000 0x80000>; - }; - - bootloaderenv@c0000 { - label = "bootloader env"; - reg = <0xc0000 0xc0000>; - }; - - dtb@180000 { - label = "device tree"; - reg = <0x180000 0x80000>; - }; - - kernel@200000 { - label = "kernel"; - reg = <0x200000 0x600000>; - }; + nand_controller: nand-controller { + status = "okay"; - rootfs@800000 { - label = "rootfs"; - reg = <0x800000 0x0f800000>; + nand@3 { + reg = <0x3 0x0 0x2>; + atmel,rb = <0>; + nand-bus-width = <8>; + nand-ecc-mode = "hw"; + nand-on-flash-bbt; + label = "atmel_nand"; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + at91bootstrap@0 { + label = "at91bootstrap"; + reg = <0x0 0x40000>; + }; + + bootloader@40000 { + label = "bootloader"; + reg = <0x40000 0x80000>; + }; + + bootloaderenv@c0000 { + label = "bootloader env"; + reg = <0xc0000 0xc0000>; + }; + + dtb@180000 { + label = "device tree"; + reg = <0x180000 0x80000>; + }; + + kernel@200000 { + label = "kernel"; + reg = <0x200000 0x600000>; + }; + + rootfs@800000 { + label = "rootfs"; + reg = <0x800000 0x0f800000>; + }; + }; + }; }; }; }; diff --git a/arch/arm/boot/dts/at91-tse850-3.dts b/arch/arm/boot/dts/at91-tse850-3.dts index a5c0dd630253..5f29010cdbd8 100644 --- a/arch/arm/boot/dts/at91-tse850-3.dts +++ b/arch/arm/boot/dts/at91-tse850-3.dts @@ -161,45 +161,51 @@ }; }; -&nand0 { - at91bootstrap@0 { - label = "at91bootstrap"; - reg = <0x0 0x40000>; - }; +&nand { + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + at91bootstrap@0 { + label = "at91bootstrap"; + reg = <0x0 0x40000>; + }; - barebox@40000 { - label = "bootloader"; - reg = <0x40000 0x60000>; - }; + barebox@40000 { + label = "bootloader"; + reg = <0x40000 0x60000>; + }; - bareboxenv@c0000 { - label = "bareboxenv"; - reg = <0xc0000 0x40000>; - }; + bareboxenv@c0000 { + label = "bareboxenv"; + reg = <0xc0000 0x40000>; + }; - bareboxenv2@100000 { - label = "bareboxenv2"; - reg = <0x100000 0x40000>; - }; + bareboxenv2@100000 { + label = "bareboxenv2"; + reg = <0x100000 0x40000>; + }; - oftree@180000 { - label = "oftree"; - reg = <0x180000 0x20000>; - }; + oftree@180000 { + label = "oftree"; + reg = <0x180000 0x20000>; + }; - kernel@200000 { - label = "kernel"; - reg = <0x200000 0x500000>; - }; + kernel@200000 { + label = "kernel"; + reg = <0x200000 0x500000>; + }; - rootfs@800000 { - label = "rootfs"; - reg = <0x800000 0x0f800000>; - }; + rootfs@800000 { + label = "rootfs"; + reg = <0x800000 0x0f800000>; + }; - ovlfs@10000000 { - label = "ovlfs"; - reg = <0x10000000 0x10000000>; + ovlfs@10000000 { + label = "ovlfs"; + reg = <0x10000000 0x10000000>; + }; }; }; diff --git a/arch/arm/boot/dts/at91sam9260.dtsi b/arch/arm/boot/dts/at91sam9260.dtsi index ab0e73374567..6582f3cca929 100644 --- a/arch/arm/boot/dts/at91sam9260.dtsi +++ b/arch/arm/boot/dts/at91sam9260.dtsi @@ -532,10 +532,14 @@ }; nand { - pinctrl_nand: nand-0 { + pinctrl_nand_rb: nand-rb-0 { atmel,pins = - ; /* PC14 gpio enable pin pull_up */ + ; + }; + + pinctrl_nand_cs: nand-cs-0 { + atmel,pins = + ; }; }; @@ -995,24 +999,6 @@ }; }; - nand0: nand@40000000 { - compatible = "atmel,at91rm9200-nand"; - #address-cells = <1>; - #size-cells = <1>; - reg = <0x40000000 0x10000000 - 0xffffe800 0x200 - >; - atmel,nand-addr-offset = <21>; - atmel,nand-cmd-offset = <22>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_nand>; - gpios = <&pioC 13 GPIO_ACTIVE_HIGH - &pioC 14 GPIO_ACTIVE_HIGH - 0 - >; - status = "disabled"; - }; - usb0: ohci@500000 { compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00500000 0x100000>; diff --git a/arch/arm/boot/dts/at91sam9261.dtsi b/arch/arm/boot/dts/at91sam9261.dtsi index 3ab0c21134f1..a05353f96151 100644 --- a/arch/arm/boot/dts/at91sam9261.dtsi +++ b/arch/arm/boot/dts/at91sam9261.dtsi @@ -118,22 +118,6 @@ }; }; - nand0: nand@40000000 { - compatible = "atmel,at91rm9200-nand"; - #address-cells = <1>; - #size-cells = <1>; - reg = <0x40000000 0x10000000>; - atmel,nand-addr-offset = <22>; - atmel,nand-cmd-offset = <21>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_nand>; - - gpios = <&pioC 15 GPIO_ACTIVE_HIGH>, - <&pioC 14 GPIO_ACTIVE_HIGH>, - <0>; - status = "disabled"; - }; - apb { compatible = "simple-bus"; #address-cells = <1>; @@ -394,9 +378,13 @@ }; nand { - pinctrl_nand: nand-0 { + pinctrl_nand_rb: nand-rb-0 { + atmel,pins = + ; + }; + + pinctrl_nand_cs: nand-cs-0 { atmel,pins = - , ; }; }; diff --git a/arch/arm/boot/dts/at91sam9261ek.dts b/arch/arm/boot/dts/at91sam9261ek.dts index 55bd51f07fa6..157e1493e6eb 100644 --- a/arch/arm/boot/dts/at91sam9261ek.dts +++ b/arch/arm/boot/dts/at91sam9261ek.dts @@ -68,40 +68,59 @@ }; }; - nand0: nand@40000000 { - nand-bus-width = <8>; - nand-ecc-mode = "soft"; - nand-on-flash-bbt; + ebi: ebi@10000000 { status = "okay"; - at91bootstrap@0 { - label = "at91bootstrap"; - reg = <0x0 0x40000>; - }; - - bootloader@40000 { - label = "bootloader"; - reg = <0x40000 0x80000>; - }; - - bootloaderenv@c0000 { - label = "bootloader env"; - reg = <0xc0000 0xc0000>; - }; - - dtb@180000 { - label = "device tree"; - reg = <0x180000 0x80000>; - }; - - kernel@200000 { - label = "kernel"; - reg = <0x200000 0x600000>; - }; - - rootfs@800000 { - label = "rootfs"; - reg = <0x800000 0x0f800000>; + nand_controller: nand-controller { + status = "okay"; + pinctrl-0 = <&pinctrl_nand_cs &pinctrl_nand_rb>; + pinctrl-names = "default"; + + nand@3 { + reg = <0x3 0x0 0x800000>; + rb-gpios = <&pioC 15 GPIO_ACTIVE_HIGH>; + cs-gpios = <&pioC 14 GPIO_ACTIVE_HIGH>; + nand-bus-width = <8>; + nand-ecc-mode = "soft"; + nand-on-flash-bbt; + label = "atmel_nand"; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + at91bootstrap@0 { + label = "at91bootstrap"; + reg = <0x0 0x40000>; + }; + + bootloader@40000 { + label = "bootloader"; + reg = <0x40000 0x80000>; + }; + + bootloaderenv@c0000 { + label = "bootloader env"; + reg = <0xc0000 0xc0000>; + }; + + dtb@180000 { + label = "device tree"; + reg = <0x180000 0x80000>; + }; + + kernel@200000 { + label = "kernel"; + reg = <0x200000 0x600000>; + }; + + rootfs@800000 { + label = "rootfs"; + reg = <0x800000 0x0f800000>; + }; + }; + }; }; }; diff --git a/arch/arm/boot/dts/at91sam9263.dtsi b/arch/arm/boot/dts/at91sam9263.dtsi index db9f3a02f2fa..ed4b564f8de5 100644 --- a/arch/arm/boot/dts/at91sam9263.dtsi +++ b/arch/arm/boot/dts/at91sam9263.dtsi @@ -487,10 +487,14 @@ }; nand { - pinctrl_nand: nand-0 { + pinctrl_nand_rb: nand-rb-0 { atmel,pins = - ; /* PD15 gpio enable pin pull_up */ + ; + }; + + pinctrl_nand_cs: nand-cs-0 { + atmel,pins = + ; }; }; @@ -1006,24 +1010,6 @@ status = "disabled"; }; - nand0: nand@40000000 { - compatible = "atmel,at91rm9200-nand"; - #address-cells = <1>; - #size-cells = <1>; - reg = <0x40000000 0x10000000 - 0xffffe000 0x200 - >; - atmel,nand-addr-offset = <21>; - atmel,nand-cmd-offset = <22>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_nand>; - gpios = <&pioA 22 GPIO_ACTIVE_HIGH - &pioD 15 GPIO_ACTIVE_HIGH - 0 - >; - status = "disabled"; - }; - usb0: ohci@00a00000 { compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00a00000 0x100000>; diff --git a/arch/arm/boot/dts/at91sam9263ek.dts b/arch/arm/boot/dts/at91sam9263ek.dts index 127cc42e9e29..10a0925da10e 100644 --- a/arch/arm/boot/dts/at91sam9263ek.dts +++ b/arch/arm/boot/dts/at91sam9263ek.dts @@ -125,50 +125,69 @@ }; }; - nand0: nand@40000000 { - nand-bus-width = <8>; - nand-ecc-mode = "soft"; - nand-on-flash-bbt = <1>; + ebi0: ebi@10000000 { status = "okay"; - at91bootstrap@0 { - label = "at91bootstrap"; - reg = <0x0 0x20000>; - }; - - barebox@20000 { - label = "barebox"; - reg = <0x20000 0x40000>; - }; - - bareboxenv@60000 { - label = "bareboxenv"; - reg = <0x60000 0x20000>; - }; - - bareboxenv2@80000 { - label = "bareboxenv2"; - reg = <0x80000 0x20000>; - }; - - oftree@80000 { - label = "oftree"; - reg = <0xa0000 0x20000>; - }; - - kernel@a0000 { - label = "kernel"; - reg = <0xc0000 0x400000>; - }; - - rootfs@4a0000 { - label = "rootfs"; - reg = <0x4c0000 0x7800000>; - }; - - data@7ca0000 { - label = "data"; - reg = <0x7cc0000 0x8340000>; + nand_controller: nand-controller { + status = "okay"; + pinctrl-0 = <&pinctrl_nand_cs &pinctrl_nand_rb>; + pinctrl-names = "default"; + + nand@3 { + reg = <0x3 0x0 0x800000>; + rb-gpios = <&pioA 22 GPIO_ACTIVE_HIGH>; + cs-gpios = <&pioA 15 GPIO_ACTIVE_HIGH>; + nand-bus-width = <8>; + nand-ecc-mode = "soft"; + nand-on-flash-bbt; + label = "atmel_nand"; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + at91bootstrap@0 { + label = "at91bootstrap"; + reg = <0x0 0x20000>; + }; + + barebox@20000 { + label = "barebox"; + reg = <0x20000 0x40000>; + }; + + bareboxenv@60000 { + label = "bareboxenv"; + reg = <0x60000 0x20000>; + }; + + bareboxenv2@80000 { + label = "bareboxenv2"; + reg = <0x80000 0x20000>; + }; + + oftree@80000 { + label = "oftree"; + reg = <0xa0000 0x20000>; + }; + + kernel@a0000 { + label = "kernel"; + reg = <0xc0000 0x400000>; + }; + + rootfs@4a0000 { + label = "rootfs"; + reg = <0x4c0000 0x7800000>; + }; + + data@7ca0000 { + label = "data"; + reg = <0x7cc0000 0x8340000>; + }; + }; + }; }; }; diff --git a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi index 27847a47c108..ac9a1511e239 100644 --- a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi +++ b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi @@ -123,50 +123,69 @@ }; }; - nand0: nand@40000000 { - nand-bus-width = <8>; - nand-ecc-mode = "soft"; - nand-on-flash-bbt; + ebi: ebi@10000000 { status = "okay"; - at91bootstrap@0 { - label = "at91bootstrap"; - reg = <0x0 0x20000>; - }; - - barebox@20000 { - label = "barebox"; - reg = <0x20000 0x40000>; - }; - - bareboxenv@60000 { - label = "bareboxenv"; - reg = <0x60000 0x20000>; - }; - - bareboxenv2@80000 { - label = "bareboxenv2"; - reg = <0x80000 0x20000>; - }; - - oftree@80000 { - label = "oftree"; - reg = <0xa0000 0x20000>; - }; - - kernel@a0000 { - label = "kernel"; - reg = <0xc0000 0x400000>; - }; - - rootfs@4a0000 { - label = "rootfs"; - reg = <0x4c0000 0x7800000>; - }; - - data@7ca0000 { - label = "data"; - reg = <0x7cc0000 0x8340000>; + nand_controller: nand-controller { + status = "okay"; + pinctrl-0 = <&pinctrl_nand_cs &pinctrl_nand_rb>; + pinctrl-names = "default"; + + nand@3 { + reg = <0x3 0x0 0x800000>; + rb-gpios = <&pioC 13 GPIO_ACTIVE_HIGH>; + cs-gpios = <&pioC 14 GPIO_ACTIVE_HIGH>; + nand-bus-width = <8>; + nand-ecc-mode = "soft"; + nand-on-flash-bbt; + label = "atmel_nand"; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + at91bootstrap@0 { + label = "at91bootstrap"; + reg = <0x0 0x20000>; + }; + + barebox@20000 { + label = "barebox"; + reg = <0x20000 0x40000>; + }; + + bareboxenv@60000 { + label = "bareboxenv"; + reg = <0x60000 0x20000>; + }; + + bareboxenv2@80000 { + label = "bareboxenv2"; + reg = <0x80000 0x20000>; + }; + + oftree@80000 { + label = "oftree"; + reg = <0xa0000 0x20000>; + }; + + kernel@a0000 { + label = "kernel"; + reg = <0xc0000 0x400000>; + }; + + rootfs@4a0000 { + label = "rootfs"; + reg = <0x4c0000 0x7800000>; + }; + + data@7ca0000 { + label = "data"; + reg = <0x7cc0000 0x8340000>; + }; + }; + }; }; }; diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi index 392dcfb79b57..a4808c4fbc05 100644 --- a/arch/arm/boot/dts/at91sam9g45.dtsi +++ b/arch/arm/boot/dts/at91sam9g45.dtsi @@ -611,10 +611,14 @@ }; nand { - pinctrl_nand: nand-0 { + pinctrl_nand_rb: nand-rb-0 { atmel,pins = - ; /* PC14 gpio enable pin pull_up */ + ; + }; + + pinctrl_nand_cs: nand-cs-0 { + atmel,pins = + ; }; }; @@ -1288,25 +1292,6 @@ status = "disabled"; }; - nand0: nand@40000000 { - compatible = "atmel,at91rm9200-nand"; - #address-cells = <1>; - #size-cells = <1>; - reg = <0x40000000 0x10000000 - 0xffffe200 0x200 - >; - atmel,nand-addr-offset = <21>; - atmel,nand-cmd-offset = <22>; - atmel,nand-has-dma; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_nand>; - gpios = <&pioC 8 GPIO_ACTIVE_HIGH - &pioC 14 GPIO_ACTIVE_HIGH - 0 - >; - status = "disabled"; - }; - usb0: ohci@00700000 { compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00700000 0x100000>; diff --git a/arch/arm/boot/dts/at91sam9m10g45ek.dts b/arch/arm/boot/dts/at91sam9m10g45ek.dts index 2400c99134f7..2522c3308305 100644 --- a/arch/arm/boot/dts/at91sam9m10g45ek.dts +++ b/arch/arm/boot/dts/at91sam9m10g45ek.dts @@ -245,25 +245,44 @@ }; }; - nand0: nand@40000000 { - nand-bus-width = <8>; - nand-ecc-mode = "soft"; - nand-on-flash-bbt; + ebi: ebi@10000000 { status = "okay"; - boot@0 { - label = "bootstrap/uboot/kernel"; - reg = <0x0 0x400000>; - }; + nand_controller: nand-controller { + status = "okay"; + pinctrl-0 = <&pinctrl_nand_cs &pinctrl_nand_rb>; + pinctrl-names = "default"; - rootfs@400000 { - label = "rootfs"; - reg = <0x400000 0x3C00000>; - }; + nand@3 { + reg = <0x3 0x0 0x800000>; + rb-gpios = <&pioC 8 GPIO_ACTIVE_HIGH>; + cs-gpios = <&pioC 14 GPIO_ACTIVE_HIGH>; + nand-bus-width = <8>; + nand-ecc-mode = "soft"; + nand-on-flash-bbt; + label = "atmel_nand"; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + boot@0 { + label = "bootstrap/uboot/kernel"; + reg = <0x0 0x400000>; + }; - data@4000000 { - label = "data"; - reg = <0x4000000 0xC000000>; + rootfs@400000 { + label = "rootfs"; + reg = <0x400000 0x3C00000>; + }; + + data@4000000 { + label = "data"; + reg = <0x4000000 0xC000000>; + }; + }; + }; }; }; diff --git a/arch/arm/boot/dts/at91sam9n12.dtsi b/arch/arm/boot/dts/at91sam9n12.dtsi index df06a66ace07..06516d02d351 100644 --- a/arch/arm/boot/dts/at91sam9n12.dtsi +++ b/arch/arm/boot/dts/at91sam9n12.dtsi @@ -643,10 +643,14 @@ }; nand { - pinctrl_nand: nand-0 { + pinctrl_nand_rb: nand-rb-0 { atmel,pins = - ; /* PD4 gpio enable pin pull_up */ + ; + }; + + pinctrl_nand_cs: nand-cs-0 { + atmel,pins = + ; }; }; @@ -1014,28 +1018,6 @@ }; }; - nand0: nand@40000000 { - compatible = "atmel,at91rm9200-nand"; - #address-cells = <1>; - #size-cells = <1>; - reg = < 0x40000000 0x10000000 - 0xffffe000 0x00000600 - 0xffffe600 0x00000200 - 0x00108000 0x00018000 - >; - atmel,pmecc-lookup-table-offset = <0x0 0x8000>; - atmel,nand-addr-offset = <21>; - atmel,nand-cmd-offset = <22>; - atmel,nand-has-dma; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_nand>; - gpios = <&pioD 5 GPIO_ACTIVE_HIGH - &pioD 4 GPIO_ACTIVE_HIGH - 0 - >; - status = "disabled"; - }; - usb0: ohci@00500000 { compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00500000 0x00100000>; diff --git a/arch/arm/boot/dts/at91sam9n12ek.dts b/arch/arm/boot/dts/at91sam9n12ek.dts index 626c67d66626..5bea8c59b115 100644 --- a/arch/arm/boot/dts/at91sam9n12ek.dts +++ b/arch/arm/boot/dts/at91sam9n12ek.dts @@ -147,14 +147,26 @@ }; }; - nand0: nand@40000000 { - nand-bus-width = <8>; - nand-ecc-mode = "hw"; - atmel,has-pmecc; - atmel,pmecc-cap = <2>; - atmel,pmecc-sector-size = <512>; - nand-on-flash-bbt; + ebi: ebi@10000000 { status = "okay"; + + nand_controller: nand-controller { + status = "okay"; + pinctrl-0 = <&pinctrl_nand_cs &pinctrl_nand_rb>; + pinctrl-names = "default"; + + nand@3 { + reg = <0x3 0x0 0x800000>; + rb-gpios = <&pioD 5 GPIO_ACTIVE_HIGH>; + cs-gpios = <&pioD 4 GPIO_ACTIVE_HIGH>; + nand-bus-width = <8>; + nand-ecc-mode = "soft"; + nand-ecc-strength = <2>; + nand-ecc-step-size = <512>; + nand-on-flash-bbt; + label = "atmel_nand"; + }; + }; }; usb0: ohci@00500000 { diff --git a/arch/arm/boot/dts/at91sam9rl.dtsi b/arch/arm/boot/dts/at91sam9rl.dtsi index d373400cddcd..7768342a6638 100644 --- a/arch/arm/boot/dts/at91sam9rl.dtsi +++ b/arch/arm/boot/dts/at91sam9rl.dtsi @@ -117,23 +117,6 @@ }; }; - nand0: nand@40000000 { - compatible = "atmel,at91rm9200-nand"; - #address-cells = <1>; - #size-cells = <1>; - reg = <0x40000000 0x10000000>, - <0xffffe800 0x200>; - atmel,nand-addr-offset = <21>; - atmel,nand-cmd-offset = <22>; - atmel,nand-has-dma; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_nand>; - gpios = <&pioD 17 GPIO_ACTIVE_HIGH>, - <&pioB 6 GPIO_ACTIVE_HIGH>, - <0>; - status = "disabled"; - }; - apb { compatible = "simple-bus"; #address-cells = <1>; @@ -478,6 +461,14 @@ }; }; + ebi { + pinctrl_ebi_addr_nand: ebi-addr-0 { + atmel,pins = + , + ; + }; + }; + fb { pinctrl_fb: fb-0 { atmel,pins = @@ -542,28 +533,21 @@ }; nand { - pinctrl_nand: nand-0 { + pinctrl_nand_rb: nand-rb-0 { atmel,pins = - , - ; + ; }; - pinctrl_nand0_ale_cle: nand_ale_cle-0 { + pinctrl_nand_cs: nand-cs-0 { atmel,pins = - , - ; + ; }; - pinctrl_nand0_oe_we: nand_oe_we-0 { + pinctrl_nand_oe_we: nand-oe-we-0 { atmel,pins = , ; }; - - pinctrl_nand0_cs: nand_cs-0 { - atmel,pins = - ; - }; }; pwm0 { diff --git a/arch/arm/boot/dts/at91sam9rlek.dts b/arch/arm/boot/dts/at91sam9rlek.dts index 2e567d90fba8..9047c168298a 100644 --- a/arch/arm/boot/dts/at91sam9rlek.dts +++ b/arch/arm/boot/dts/at91sam9rlek.dts @@ -63,40 +63,63 @@ }; }; - nand0: nand@40000000 { - nand-bus-width = <8>; - nand-ecc-mode = "soft"; - nand-on-flash-bbt = <1>; + ebi: ebi@10000000 { + pinctrl-0 = <&pinctrl_ebi_addr_nand>; + pinctrl-names = "default"; status = "okay"; - at91bootstrap@0 { - label = "at91bootstrap"; - reg = <0x0 0x40000>; - }; - - bootloader@40000 { - label = "bootloader"; - reg = <0x40000 0x80000>; - }; - - bootloaderenv@c0000 { - label = "bootloader env"; - reg = <0xc0000 0xc0000>; - }; - - dtb@180000 { - label = "device tree"; - reg = <0x180000 0x80000>; - }; - - kernel@200000 { - label = "kernel"; - reg = <0x200000 0x600000>; - }; + nand_controller: nand-controller { + status = "okay"; + pinctrl-0 = <&pinctrl_nand_oe_we + &pinctrl_nand_cs + &pinctrl_nand_rb>; + pinctrl-names = "default"; - rootfs@800000 { - label = "rootfs"; - reg = <0x800000 0x0f800000>; + nand@3 { + reg = <0x3 0x0 0x800000>; + rb-gpios = <&pioD 17 GPIO_ACTIVE_HIGH>; + cs-gpios = <&pioB 6 GPIO_ACTIVE_HIGH>; + nand-bus-width = <8>; + nand-ecc-mode = "soft"; + nand-on-flash-bbt; + label = "atmel_nand"; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + at91bootstrap@0 { + label = "at91bootstrap"; + reg = <0x0 0x40000>; + }; + + bootloader@40000 { + label = "bootloader"; + reg = <0x40000 0x80000>; + }; + + bootloaderenv@c0000 { + label = "bootloader env"; + reg = <0xc0000 0xc0000>; + }; + + dtb@180000 { + label = "device tree"; + reg = <0x180000 0x80000>; + }; + + kernel@200000 { + label = "kernel"; + reg = <0x200000 0x600000>; + }; + + rootfs@800000 { + label = "rootfs"; + reg = <0x800000 0x0f800000>; + }; + }; + }; }; }; diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi index 7723e8b02880..57f307541d2e 100644 --- a/arch/arm/boot/dts/at91sam9x5.dtsi +++ b/arch/arm/boot/dts/at91sam9x5.dtsi @@ -481,6 +481,38 @@ }; }; + ebi { + pinctrl_ebi_data_0_7: ebi-data-lsb-0 { + atmel,pins = + ; + }; + + pinctrl_ebi_data_8_15: ebi-data-msb-0 { + atmel,pins = + ; + }; + + pinctrl_ebi_addr_nand: ebi-addr-0 { + atmel,pins = + ; + }; + }; + usart0 { pinctrl_usart0: usart0-0 { atmel,pins = @@ -567,34 +599,20 @@ }; nand { - pinctrl_nand: nand-0 { + pinctrl_nand_oe_we: nand-oe-we-0 { atmel,pins = - ; /* PD13 periph A Data bit 7 */ - }; - - pinctrl_nand_16bits: nand_16bits-0 { + ; + }; + + pinctrl_nand_rb: nand-rb-0 { + atmel,pins = + ; + }; + + pinctrl_nand_cs: nand-cs-0 { atmel,pins = - ; /* PD21 periph A Data bit 15 */ + ; }; }; @@ -1213,28 +1231,6 @@ }; }; - nand0: nand@40000000 { - compatible = "atmel,at91rm9200-nand"; - #address-cells = <1>; - #size-cells = <1>; - reg = <0x40000000 0x10000000 - 0xffffe000 0x600 /* PMECC Registers */ - 0xffffe600 0x200 /* PMECC Error Location Registers */ - 0x00108000 0x18000 /* PMECC looup table in ROM code */ - >; - atmel,pmecc-lookup-table-offset = <0x0 0x8000>; - atmel,nand-addr-offset = <21>; - atmel,nand-cmd-offset = <22>; - atmel,nand-has-dma; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_nand>; - gpios = <&pioD 5 GPIO_ACTIVE_HIGH - &pioD 4 GPIO_ACTIVE_HIGH - 0 - >; - status = "disabled"; - }; - usb0: ohci@00600000 { compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00600000 0x100000>; diff --git a/arch/arm/boot/dts/at91sam9x5cm.dtsi b/arch/arm/boot/dts/at91sam9x5cm.dtsi index b098ad8cd93a..bdeaa0b64a5b 100644 --- a/arch/arm/boot/dts/at91sam9x5cm.dtsi +++ b/arch/arm/boot/dts/at91sam9x5cm.dtsi @@ -37,38 +37,61 @@ }; }; - nand0: nand@40000000 { - nand-bus-width = <8>; - nand-ecc-mode = "hw"; - atmel,has-pmecc; /* Enable PMECC */ - atmel,pmecc-cap = <2>; - atmel,pmecc-sector-size = <512>; - nand-on-flash-bbt; + ebi: ebi@10000000 { + pinctrl-0 = <&pinctrl_ebi_addr_nand + &pinctrl_ebi_data_0_7>; + pinctrl-names = "default"; status = "okay"; - at91bootstrap@0 { - label = "at91bootstrap"; - reg = <0x0 0x40000>; - }; - - uboot@40000 { - label = "u-boot"; - reg = <0x40000 0x80000>; - }; - - ubootenv@c0000 { - label = "U-Boot Env"; - reg = <0xc0000 0x140000>; - }; - - kernel@200000 { - label = "kernel"; - reg = <0x200000 0x600000>; - }; - - rootfs@800000 { - label = "rootfs"; - reg = <0x800000 0x1f800000>; + nand_controller: nand-controller { + status = "okay"; + pinctrl-0 = <&pinctrl_nand_oe_we + &pinctrl_nand_cs + &pinctrl_nand_rb>; + pinctrl-names = "default"; + + nand@3 { + reg = <0x3 0x0 0x800000>; + rb-gpios = <&pioD 5 GPIO_ACTIVE_HIGH>; + cs-gpios = <&pioD 4 GPIO_ACTIVE_HIGH>; + nand-bus-width = <8>; + nand-ecc-mode = "hw"; + nand-ecc-strength = <2>; + nand-ecc-step-size = <512>; + nand-on-flash-bbt; + label = "atmel_nand"; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + at91bootstrap@0 { + label = "at91bootstrap"; + reg = <0x0 0x40000>; + }; + + uboot@40000 { + label = "u-boot"; + reg = <0x40000 0x80000>; + }; + + ubootenv@c0000 { + label = "U-Boot Env"; + reg = <0xc0000 0x140000>; + }; + + kernel@200000 { + label = "kernel"; + reg = <0x200000 0x600000>; + }; + + rootfs@800000 { + label = "rootfs"; + reg = <0x800000 0x1f800000>; + }; + }; + }; }; }; }; diff --git a/arch/arm/boot/dts/ethernut5.dts b/arch/arm/boot/dts/ethernut5.dts index 4687229a3ab9..123b203be06c 100644 --- a/arch/arm/boot/dts/ethernut5.dts +++ b/arch/arm/boot/dts/ethernut5.dts @@ -55,25 +55,38 @@ }; }; - nand0: nand@40000000 { - nand-bus-width = <8>; - nand-ecc-mode = "soft"; - nand-on-flash-bbt; + ebi: ebi@10000000 { status = "okay"; - gpios = <0 - &pioC 14 GPIO_ACTIVE_HIGH - 0 - >; - - root@0 { - label = "root"; - reg = <0x0 0x08000000>; - }; - - data@20000 { - label = "data"; - reg = <0x08000000 0x38000000>; + nand_controller: nand-controller { + status = "okay"; + pinctrl-0 = <&pinctrl_nand_cs>; + pinctrl-names = "default"; + + nand: nand@3 { + reg = <0x3 0x0 0x800000>; + cs-gpios = <&pioC 14 GPIO_ACTIVE_HIGH>; + nand-bus-width = <8>; + nand-ecc-mode = "soft"; + nand-on-flash-bbt; + label = "atmel_nand"; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + root@0 { + label = "root"; + reg = <0x0 0x08000000>; + }; + + data@20000 { + label = "data"; + reg = <0x08000000 0x38000000>; + }; + }; + }; }; }; diff --git a/arch/arm/boot/dts/ge863-pro3.dtsi b/arch/arm/boot/dts/ge863-pro3.dtsi index 4aee5cc75fa4..8613944ea5c5 100644 --- a/arch/arm/boot/dts/ge863-pro3.dtsi +++ b/arch/arm/boot/dts/ge863-pro3.dtsi @@ -23,20 +23,39 @@ }; }; - nand0: nand@40000000 { - nand-bus-width = <8>; - nand-ecc-mode = "soft"; - nand-on-flash-bbt; + ebi: ebi@10000000 { status = "okay"; - boot@0 { - label = "boot"; - reg = <0x0 0x7c0000>; - }; + nand_controller: nand-controller { + status = "okay"; + pinctrl-0 = <&pinctrl_nand_cs &pinctrl_nand_rb>; + pinctrl-names = "default"; + + nand@3 { + reg = <0x3 0x0 0x800000>; + rb-gpios = <&pioC 13 GPIO_ACTIVE_HIGH>; + cs-gpios = <&pioC 14 GPIO_ACTIVE_HIGH>; + nand-bus-width = <8>; + nand-ecc-mode = "soft"; + nand-on-flash-bbt; + label = "atmel_nand"; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + boot@0 { + label = "boot"; + reg = <0x0 0x7c0000>; + }; - root@07c0000 { - label = "root"; - reg = <0x7c0000 0x7840000>; + root@07c0000 { + label = "root"; + reg = <0x7c0000 0x7840000>; + }; + }; + }; }; }; }; diff --git a/arch/arm/boot/dts/pm9g45.dts b/arch/arm/boot/dts/pm9g45.dts index 0abd7bf17568..3139221737ee 100644 --- a/arch/arm/boot/dts/pm9g45.dts +++ b/arch/arm/boot/dts/pm9g45.dts @@ -37,12 +37,10 @@ }; pinctrl@fffff200 { - - board { - pinctrl_board_nand: nand0-board { + nand { + pinctrl_nand_rb: nand-rb-0 { atmel,pins = - ; /* PC14 gpio enable pin pull_up */ + ; }; }; @@ -71,50 +69,61 @@ phy-mode = "rmii"; status = "okay"; }; - }; - nand0: nand@40000000 { - nand-bus-width = <8>; - nand-ecc-mode = "soft"; - nand-on-flash-bbt; - pinctrl-0 = <&pinctrl_board_nand>; - - gpios = <&pioD 3 GPIO_ACTIVE_HIGH - &pioC 14 GPIO_ACTIVE_HIGH - 0 - >; - + ebi: ebi@10000000 { status = "okay"; - at91bootstrap@0 { - label = "at91bootstrap"; - reg = <0x0 0x20000>; - }; - - barebox@20000 { - label = "barebox"; - reg = <0x20000 0x40000>; - }; - - bareboxenv@60000 { - label = "bareboxenv"; - reg = <0x60000 0x1A0000>; - }; - - kernel@200000 { - label = "bareboxenv2"; - reg = <0x200000 0x300000>; - }; - - kernel@500000 { - label = "root"; - reg = <0x500000 0x400000>; - }; - - data@900000 { - label = "data"; - reg = <0x900000 0x8340000>; + nand_controller: nand-controller { + status = "okay"; + pinctrl-0 = <&pinctrl_nand_cs &pinctrl_nand_rb>; + pinctrl-names = "default"; + + nand@3 { + reg = <0x3 0x0 0x800000>; + rb-gpios = <&pioD 3 GPIO_ACTIVE_HIGH>; + cs-gpios = <&pioC 14 GPIO_ACTIVE_HIGH>; + nand-bus-width = <8>; + nand-ecc-mode = "soft"; + nand-on-flash-bbt; + label = "atmel_nand"; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + at91bootstrap@0 { + label = "at91bootstrap"; + reg = <0x0 0x20000>; + }; + + barebox@20000 { + label = "barebox"; + reg = <0x20000 0x40000>; + }; + + bareboxenv@60000 { + label = "bareboxenv"; + reg = <0x60000 0x1A0000>; + }; + + kernel@200000 { + label = "bareboxenv2"; + reg = <0x200000 0x300000>; + }; + + kernel@500000 { + label = "root"; + reg = <0x500000 0x400000>; + }; + + data@900000 { + label = "data"; + reg = <0x900000 0x8340000>; + }; + }; + }; }; }; diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi index 3925f83f58a6..554d0bdedc7a 100644 --- a/arch/arm/boot/dts/sama5d3.dtsi +++ b/arch/arm/boot/dts/sama5d3.dtsi @@ -1569,38 +1569,6 @@ }; }; - nand0: nand@60000000 { - compatible = "atmel,at91rm9200-nand"; - #address-cells = <1>; - #size-cells = <1>; - ranges; - reg = < 0x60000000 0x01000000 /* EBI CS3 */ - 0xffffc070 0x00000490 /* SMC PMECC regs */ - 0xffffc500 0x00000100 /* SMC PMECC Error Location regs */ - 0x00110000 0x00018000 /* ROM code */ - >; - interrupts = <5 IRQ_TYPE_LEVEL_HIGH 6>; - atmel,nand-addr-offset = <21>; - atmel,nand-cmd-offset = <22>; - atmel,nand-has-dma; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_nand0_ale_cle>; - atmel,pmecc-lookup-table-offset = <0x0 0x8000>; - status = "disabled"; - - nfc@70000000 { - compatible = "atmel,sama5d3-nfc"; - #address-cells = <1>; - #size-cells = <1>; - reg = < - 0x70000000 0x08000000 /* NFC Command Registers */ - 0xffffc000 0x00000070 /* NFC HSMC regs */ - 0x00200000 0x00100000 /* NFC SRAM banks */ - >; - clocks = <&hsmc_clk>; - }; - }; - nfc_io: nfc-io@70000000 { compatible = "atmel,sama5d3-nfc-io", "syscon"; reg = <0x70000000 0x8000000>; diff --git a/arch/arm/boot/dts/sama5d3xcm.dtsi b/arch/arm/boot/dts/sama5d3xcm.dtsi index b5e111b29da1..4606e1d7e6f2 100644 --- a/arch/arm/boot/dts/sama5d3xcm.dtsi +++ b/arch/arm/boot/dts/sama5d3xcm.dtsi @@ -36,43 +36,59 @@ }; }; - nand0: nand@60000000 { - nand-bus-width = <8>; - nand-ecc-mode = "hw"; - atmel,has-pmecc; - atmel,pmecc-cap = <4>; - atmel,pmecc-sector-size = <512>; - nand-on-flash-bbt; + ebi@10000000 { + pinctrl-0 = <&pinctrl_ebi_nand_addr>; + pinctrl-names = "default"; status = "okay"; - at91bootstrap@0 { - label = "at91bootstrap"; - reg = <0x0 0x40000>; - }; + nand_controller: nand-controller { + status = "okay"; - bootloader@40000 { - label = "bootloader"; - reg = <0x40000 0x80000>; - }; + nand@3 { + reg = <0x3 0x0 0x2>; + atmel,rb = <0>; + nand-ecc-mode = "hw"; + nand-ecc-strength = <4>; + nand-ecc-step-size = <512>; + nand-on-flash-bbt; + label = "atmel_nand"; - bootloaderenv@c0000 { - label = "bootloader env"; - reg = <0xc0000 0xc0000>; - }; + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; - dtb@180000 { - label = "device tree"; - reg = <0x180000 0x80000>; - }; + at91bootstrap@0 { + label = "at91bootstrap"; + reg = <0x0 0x40000>; + }; - kernel@200000 { - label = "kernel"; - reg = <0x200000 0x600000>; - }; + bootloader@40000 { + label = "bootloader"; + reg = <0x40000 0x80000>; + }; + + bootloaderenv@c0000 { + label = "bootloader env"; + reg = <0xc0000 0xc0000>; + }; + + dtb@180000 { + label = "device tree"; + reg = <0x180000 0x80000>; + }; + + kernel@200000 { + label = "kernel"; + reg = <0x200000 0x600000>; + }; - rootfs@800000 { - label = "rootfs"; - reg = <0x800000 0x0f800000>; + rootfs@800000 { + label = "rootfs"; + reg = <0x800000 0x0f800000>; + }; + }; + }; }; }; }; diff --git a/arch/arm/boot/dts/sama5d3xcm_cmp.dtsi b/arch/arm/boot/dts/sama5d3xcm_cmp.dtsi index dc7572bc7ff0..75cbf4d4ab1a 100644 --- a/arch/arm/boot/dts/sama5d3xcm_cmp.dtsi +++ b/arch/arm/boot/dts/sama5d3xcm_cmp.dtsi @@ -148,43 +148,60 @@ }; }; - nand0: nand@60000000 { - nand-bus-width = <8>; - nand-ecc-mode = "hw"; - atmel,has-pmecc; - atmel,pmecc-cap = <4>; - atmel,pmecc-sector-size = <512>; - nand-on-flash-bbt; + ebi: ebi@10000000 { + pinctrl-0 = <&pinctrl_ebi_nand_addr>; + pinctrl-names = "default"; status = "okay"; - at91bootstrap@0 { - label = "at91bootstrap"; - reg = <0x0 0x40000>; - }; + nand_controller: nand-controller { + status = "okay"; + + nand@3 { + reg = <0x3 0x0 0x2>; + atmel,rb = <0>; + nand-bus-width = <8>; + nand-ecc-mode = "hw"; + nand-ecc-strength = <4>; + nand-ecc-step-size = <512>; + nand-on-flash-bbt; + label = "atmel_nand"; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + at91bootstrap@0 { + label = "at91bootstrap"; + reg = <0x0 0x40000>; + }; - bootloader@40000 { - label = "bootloader"; - reg = <0x40000 0x80000>; - }; + bootloader@40000 { + label = "bootloader"; + reg = <0x40000 0x80000>; + }; - bootloaderenv@c0000 { - label = "bootloader env"; - reg = <0xc0000 0xc0000>; - }; + bootloaderenv@c0000 { + label = "bootloader env"; + reg = <0xc0000 0xc0000>; + }; - dtb@180000 { - label = "device tree"; - reg = <0x180000 0x80000>; - }; + dtb@180000 { + label = "device tree"; + reg = <0x180000 0x80000>; + }; - kernel@200000 { - label = "kernel"; - reg = <0x200000 0x600000>; - }; + kernel@200000 { + label = "kernel"; + reg = <0x200000 0x600000>; + }; - rootfs@800000 { - label = "rootfs"; - reg = <0x800000 0x0f800000>; + rootfs@800000 { + label = "rootfs"; + reg = <0x800000 0x0f800000>; + }; + }; + }; }; }; }; diff --git a/arch/arm/boot/dts/sama5d4.dtsi b/arch/arm/boot/dts/sama5d4.dtsi index de6bcff87745..2fa36c525957 100644 --- a/arch/arm/boot/dts/sama5d4.dtsi +++ b/arch/arm/boot/dts/sama5d4.dtsi @@ -312,37 +312,6 @@ }; }; - nand0: nand@80000000 { - compatible = "atmel,sama5d4-nand", "atmel,at91rm9200-nand"; - #address-cells = <1>; - #size-cells = <1>; - ranges; - reg = < 0x80000000 0x08000000 /* EBI CS3 */ - 0xfc05c070 0x00000490 /* SMC PMECC regs */ - 0xfc05c500 0x00000100 /* SMC PMECC Error Location regs */ - >; - interrupts = <22 IRQ_TYPE_LEVEL_HIGH 6>; - atmel,nand-addr-offset = <21>; - atmel,nand-cmd-offset = <22>; - atmel,nand-has-dma; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_nand>; - status = "disabled"; - - nfc@90000000 { - compatible = "atmel,sama5d3-nfc"; - #address-cells = <1>; - #size-cells = <1>; - reg = < - 0x90000000 0x08000000 /* NFC Command Registers */ - 0xfc05c000 0x00000070 /* NFC HSMC regs */ - 0x00100000 0x00100000 /* NFC SRAM banks */ - >; - clocks = <&hsmc_clk>; - atmel,write-by-sram; - }; - }; - nfc_io: nfc-io@90000000 { compatible = "atmel,sama5d3-nfc-io", "syscon"; reg = <0x90000000 0x8000000>; diff --git a/arch/arm/boot/dts/tny_a9260_common.dtsi b/arch/arm/boot/dts/tny_a9260_common.dtsi index f9dc463b9e48..5d83df4675a1 100644 --- a/arch/arm/boot/dts/tny_a9260_common.dtsi +++ b/arch/arm/boot/dts/tny_a9260_common.dtsi @@ -32,50 +32,69 @@ }; }; - nand0: nand@40000000 { - nand-bus-width = <8>; - nand-ecc-mode = "soft"; - nand-on-flash-bbt; + ebi: ebi@10000000 { status = "okay"; - at91bootstrap@0 { - label = "at91bootstrap"; - reg = <0x0 0x20000>; - }; + nand_controller: nand-controller { + status = "okay"; + pinctrl-0 = <&pinctrl_nand_cs &pinctrl_nand_rb>; + pinctrl-names = "default"; - barebox@20000 { - label = "barebox"; - reg = <0x20000 0x40000>; - }; + nand@3 { + reg = <0x3 0x0 0x800000>; + rb-gpios = <&pioC 13 GPIO_ACTIVE_HIGH>; + cs-gpios = <&pioC 14 GPIO_ACTIVE_HIGH>; + nand-bus-width = <8>; + nand-ecc-mode = "soft"; + nand-on-flash-bbt; + label = "atmel_nand"; - bareboxenv@60000 { - label = "bareboxenv"; - reg = <0x60000 0x20000>; - }; + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; - bareboxenv2@80000 { - label = "bareboxenv2"; - reg = <0x80000 0x20000>; - }; + at91bootstrap@0 { + label = "at91bootstrap"; + reg = <0x0 0x20000>; + }; - oftree@80000 { - label = "oftree"; - reg = <0xa0000 0x20000>; - }; + barebox@20000 { + label = "barebox"; + reg = <0x20000 0x40000>; + }; - kernel@a0000 { - label = "kernel"; - reg = <0xc0000 0x400000>; - }; + bareboxenv@60000 { + label = "bareboxenv"; + reg = <0x60000 0x20000>; + }; - rootfs@4a0000 { - label = "rootfs"; - reg = <0x4c0000 0x7800000>; - }; + bareboxenv2@80000 { + label = "bareboxenv2"; + reg = <0x80000 0x20000>; + }; + + oftree@80000 { + label = "oftree"; + reg = <0xa0000 0x20000>; + }; + + kernel@a0000 { + label = "kernel"; + reg = <0xc0000 0x400000>; + }; + + rootfs@4a0000 { + label = "rootfs"; + reg = <0x4c0000 0x7800000>; + }; - data@7ca0000 { - label = "data"; - reg = <0x7cc0000 0x8340000>; + data@7ca0000 { + label = "data"; + reg = <0x7cc0000 0x8340000>; + }; + }; + }; }; }; }; diff --git a/arch/arm/boot/dts/tny_a9263.dts b/arch/arm/boot/dts/tny_a9263.dts index 9161cd9889b4..8cf0a9e08571 100644 --- a/arch/arm/boot/dts/tny_a9263.dts +++ b/arch/arm/boot/dts/tny_a9263.dts @@ -42,50 +42,69 @@ }; }; - nand0: nand@40000000 { - nand-bus-width = <8>; - nand-ecc-mode = "soft"; - nand-on-flash-bbt; + ebi0: ebi@10000000 { status = "okay"; - at91bootstrap@0 { - label = "at91bootstrap"; - reg = <0x0 0x20000>; - }; - - barebox@20000 { - label = "barebox"; - reg = <0x20000 0x40000>; - }; - - bareboxenv@60000 { - label = "bareboxenv"; - reg = <0x60000 0x20000>; - }; - - bareboxenv2@80000 { - label = "bareboxenv2"; - reg = <0x80000 0x20000>; - }; - - oftree@80000 { - label = "oftree"; - reg = <0xa0000 0x20000>; - }; - - kernel@a0000 { - label = "kernel"; - reg = <0xc0000 0x400000>; - }; - - rootfs@4a0000 { - label = "rootfs"; - reg = <0x4c0000 0x7800000>; - }; - - data@7ca0000 { - label = "data"; - reg = <0x7cc0000 0x8340000>; + nand_controller: nand-controller { + status = "okay"; + pinctrl-0 = <&pinctrl_nand_cs &pinctrl_nand_rb>; + pinctrl-names = "default"; + + nand@3 { + reg = <0x3 0x0 0x800000>; + rb-gpios = <&pioA 22 GPIO_ACTIVE_HIGH>; + cs-gpios = <&pioA 15 GPIO_ACTIVE_HIGH>; + nand-bus-width = <8>; + nand-ecc-mode = "soft"; + nand-on-flash-bbt; + label = "atmel_nand"; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + at91bootstrap@0 { + label = "at91bootstrap"; + reg = <0x0 0x20000>; + }; + + barebox@20000 { + label = "barebox"; + reg = <0x20000 0x40000>; + }; + + bareboxenv@60000 { + label = "bareboxenv"; + reg = <0x60000 0x20000>; + }; + + bareboxenv2@80000 { + label = "bareboxenv2"; + reg = <0x80000 0x20000>; + }; + + oftree@80000 { + label = "oftree"; + reg = <0xa0000 0x20000>; + }; + + kernel@a0000 { + label = "kernel"; + reg = <0xc0000 0x400000>; + }; + + rootfs@4a0000 { + label = "rootfs"; + reg = <0x4c0000 0x7800000>; + }; + + data@7ca0000 { + label = "data"; + reg = <0x7cc0000 0x8340000>; + }; + }; + }; }; }; }; diff --git a/arch/arm/boot/dts/usb_a9260_common.dtsi b/arch/arm/boot/dts/usb_a9260_common.dtsi index 7514b347cdd2..34a49995eda3 100644 --- a/arch/arm/boot/dts/usb_a9260_common.dtsi +++ b/arch/arm/boot/dts/usb_a9260_common.dtsi @@ -34,50 +34,69 @@ }; }; - nand0: nand@40000000 { - nand-bus-width = <8>; - nand-ecc-mode = "soft"; - nand-on-flash-bbt; + ebi: ebi@10000000 { status = "okay"; - at91bootstrap@0 { - label = "at91bootstrap"; - reg = <0x0 0x20000>; - }; - - barebox@20000 { - label = "barebox"; - reg = <0x20000 0x40000>; - }; - - bareboxenv@60000 { - label = "bareboxenv"; - reg = <0x60000 0x20000>; - }; - - bareboxenv2@80000 { - label = "bareboxenv2"; - reg = <0x80000 0x20000>; - }; - - oftree@80000 { - label = "oftree"; - reg = <0xa0000 0x20000>; - }; - - kernel@a0000 { - label = "kernel"; - reg = <0xc0000 0x400000>; - }; - - rootfs@4a0000 { - label = "rootfs"; - reg = <0x4c0000 0x7800000>; - }; - - data@7ca0000 { - label = "data"; - reg = <0x7cc0000 0x8340000>; + nand_controller: nand-controller { + status = "okay"; + pinctrl-0 = <&pinctrl_nand_cs &pinctrl_nand_rb>; + pinctrl-names = "default"; + + nand@3 { + reg = <0x3 0x0 0x800000>; + rb-gpios = <&pioC 13 GPIO_ACTIVE_HIGH>; + cs-gpios = <&pioC 14 GPIO_ACTIVE_HIGH>; + nand-bus-width = <8>; + nand-ecc-mode = "soft"; + nand-on-flash-bbt; + label = "atmel_nand"; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + at91bootstrap@0 { + label = "at91bootstrap"; + reg = <0x0 0x20000>; + }; + + barebox@20000 { + label = "barebox"; + reg = <0x20000 0x40000>; + }; + + bareboxenv@60000 { + label = "bareboxenv"; + reg = <0x60000 0x20000>; + }; + + bareboxenv2@80000 { + label = "bareboxenv2"; + reg = <0x80000 0x20000>; + }; + + oftree@80000 { + label = "oftree"; + reg = <0xa0000 0x20000>; + }; + + kernel@a0000 { + label = "kernel"; + reg = <0xc0000 0x400000>; + }; + + rootfs@4a0000 { + label = "rootfs"; + reg = <0x4c0000 0x7800000>; + }; + + data@7ca0000 { + label = "data"; + reg = <0x7cc0000 0x8340000>; + }; + }; + }; }; }; diff --git a/arch/arm/boot/dts/usb_a9263.dts b/arch/arm/boot/dts/usb_a9263.dts index bfc48a272417..482381c1c962 100644 --- a/arch/arm/boot/dts/usb_a9263.dts +++ b/arch/arm/boot/dts/usb_a9263.dts @@ -62,50 +62,69 @@ }; }; - nand0: nand@40000000 { - nand-bus-width = <8>; - nand-ecc-mode = "soft"; - nand-on-flash-bbt; + ebi0: ebi@10000000 { status = "okay"; - at91bootstrap@0 { - label = "at91bootstrap"; - reg = <0x0 0x20000>; - }; - - barebox@20000 { - label = "barebox"; - reg = <0x20000 0x40000>; - }; - - bareboxenv@60000 { - label = "bareboxenv"; - reg = <0x60000 0x20000>; - }; - - bareboxenv2@80000 { - label = "bareboxenv2"; - reg = <0x80000 0x20000>; - }; - - oftree@80000 { - label = "oftree"; - reg = <0xa0000 0x20000>; - }; - - kernel@a0000 { - label = "kernel"; - reg = <0xc0000 0x400000>; - }; - - rootfs@4a0000 { - label = "rootfs"; - reg = <0x4c0000 0x7800000>; - }; - - data@7ca0000 { - label = "data"; - reg = <0x7cc0000 0x8340000>; + nand_controller: nand-controller { + status = "okay"; + pinctrl-0 = <&pinctrl_nand_cs &pinctrl_nand_rb>; + pinctrl-names = "default"; + + nand@3 { + reg = <0x3 0x0 0x800000>; + rb-gpios = <&pioA 22 GPIO_ACTIVE_HIGH>; + cs-gpios = <&pioA 15 GPIO_ACTIVE_HIGH>; + nand-bus-width = <8>; + nand-ecc-mode = "soft"; + nand-on-flash-bbt; + label = "atmel_nand"; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + at91bootstrap@0 { + label = "at91bootstrap"; + reg = <0x0 0x20000>; + }; + + barebox@20000 { + label = "barebox"; + reg = <0x20000 0x40000>; + }; + + bareboxenv@60000 { + label = "bareboxenv"; + reg = <0x60000 0x20000>; + }; + + bareboxenv2@80000 { + label = "bareboxenv2"; + reg = <0x80000 0x20000>; + }; + + oftree@80000 { + label = "oftree"; + reg = <0xa0000 0x20000>; + }; + + kernel@a0000 { + label = "kernel"; + reg = <0xc0000 0x400000>; + }; + + rootfs@4a0000 { + label = "rootfs"; + reg = <0x4c0000 0x7800000>; + }; + + data@7ca0000 { + label = "data"; + reg = <0x7cc0000 0x8340000>; + }; + }; + }; }; }; -- cgit v1.2.3 From 07c0986d6e850548fbe7707fbcfb47127aa0c0a9 Mon Sep 17 00:00:00 2001 From: Boris Brezillon Date: Tue, 30 May 2017 11:20:54 +0200 Subject: ARM: dts: at91: Add the NOR flash available on sama5d3 dev kits sama5d3 CPU modules embed a parallel NOR flash connected to the EBI bus. Signed-off-by: Boris Brezillon Signed-off-by: Alexandre Belloni --- arch/arm/boot/dts/sama5d3xcm.dtsi | 27 +++++++++++++++++++++++++-- 1 file changed, 25 insertions(+), 2 deletions(-) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/sama5d3xcm.dtsi b/arch/arm/boot/dts/sama5d3xcm.dtsi index 4606e1d7e6f2..9506daf5efb6 100644 --- a/arch/arm/boot/dts/sama5d3xcm.dtsi +++ b/arch/arm/boot/dts/sama5d3xcm.dtsi @@ -37,10 +37,33 @@ }; ebi@10000000 { - pinctrl-0 = <&pinctrl_ebi_nand_addr>; - pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ebi_addr &pinctrl_ebi_cs0>; + pinctr-name = "default"; status = "okay"; + nor: flash@0,0 { + compatible = "cfi-flash"; + linux,mtd-name = "physmap-flash.0"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x0 0x0 0x1000000>; + bank-width = <2>; + atmel,smc-read-mode = "nrd"; + atmel,smc-write-mode = "nwe"; + atmel,smc-bus-width = <16>; + atmel,smc-ncs-rd-setup-ns = <0>; + atmel,smc-ncs-wr-setup-ns = <0>; + atmel,smc-nwe-setup-ns = <8>; + atmel,smc-nrd-setup-ns = <16>; + atmel,smc-ncs-rd-pulse-ns = <84>; + atmel,smc-ncs-wr-pulse-ns = <84>; + atmel,smc-nrd-pulse-ns = <76>; + atmel,smc-nwe-pulse-ns = <76>; + atmel,smc-nrd-cycle-ns = <107>; + atmel,smc-nwe-cycle-ns = <84>; + atmel,smc-tdf-ns = <16>; + }; + nand_controller: nand-controller { status = "okay"; -- cgit v1.2.3 From eb0b59d49bf46670414acd7b9b32c0db7c856f3e Mon Sep 17 00:00:00 2001 From: Claudiu Beznea Date: Wed, 31 May 2017 12:23:12 +0300 Subject: ARM: dts: at91: sama5d2_xplained: add pwm controller Add pwm controller bindings for sama5d2_xplained and enable it. Signed-off-by: Claudiu Beznea Signed-off-by: Alexandre Belloni --- arch/arm/boot/dts/at91-sama5d2_xplained.dts | 4 ++++ arch/arm/boot/dts/sama5d2.dtsi | 8 ++++++++ 2 files changed, 12 insertions(+) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/at91-sama5d2_xplained.dts b/arch/arm/boot/dts/at91-sama5d2_xplained.dts index 37de94fc9b5a..dbce6f7a73dd 100644 --- a/arch/arm/boot/dts/at91-sama5d2_xplained.dts +++ b/arch/arm/boot/dts/at91-sama5d2_xplained.dts @@ -227,6 +227,10 @@ }; }; + pwm0: pwm@f802c000 { + status = "okay"; + }; + flx0: flexcom@f8034000 { atmel,flexcom-mode = ; status = "disabled"; /* conflict with ISC_D2 & ISC_D3 data pins */ diff --git a/arch/arm/boot/dts/sama5d2.dtsi b/arch/arm/boot/dts/sama5d2.dtsi index e77fa36cb6f1..cc06da394366 100644 --- a/arch/arm/boot/dts/sama5d2.dtsi +++ b/arch/arm/boot/dts/sama5d2.dtsi @@ -1142,6 +1142,14 @@ status = "disabled"; }; + pwm0: pwm@f802c000 { + compatible = "atmel,sama5d2-pwm"; + reg = <0xf802c000 0x4000>; + interrupts = <38 IRQ_TYPE_LEVEL_HIGH 7>; + #pwm-cells = <3>; + clocks = <&pwm_clk>; + }; + sfr: sfr@f8030000 { compatible = "atmel,sama5d2-sfr", "syscon"; reg = <0xf8030000 0x98>; -- cgit v1.2.3 From c56ee52622cef6c8110b5e9eebf35513d3a93544 Mon Sep 17 00:00:00 2001 From: Rick Chang Date: Wed, 14 Dec 2016 16:04:49 +0800 Subject: arm: dts: mt2701: Add node for Mediatek JPEG Decoder Signed-off-by: Rick Chang Signed-off-by: Minghsiu Tsai [mb: include mt2701-larb-port.h to fix build errors] Signed-off-by: Matthias Brugger --- arch/arm/boot/dts/mt2701.dtsi | 15 +++++++++++++++ 1 file changed, 15 insertions(+) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/mt2701.dtsi b/arch/arm/boot/dts/mt2701.dtsi index 18a851b266d4..15537bc47d48 100644 --- a/arch/arm/boot/dts/mt2701.dtsi +++ b/arch/arm/boot/dts/mt2701.dtsi @@ -16,6 +16,7 @@ #include #include #include +#include #include #include "skeleton64.dtsi" #include "mt2701-pinfunc.h" @@ -414,6 +415,20 @@ power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>; }; + jpegdec: jpegdec@15004000 { + compatible = "mediatek,mt2701-jpgdec"; + reg = <0 0x15004000 0 0x1000>; + interrupts = ; + clocks = <&imgsys CLK_IMG_JPGDEC_SMI>, + <&imgsys CLK_IMG_JPGDEC>; + clock-names = "jpgdec-smi", + "jpgdec"; + power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>; + mediatek,larb = <&larb2>; + iommus = <&iommu MT2701_M4U_PORT_JPGDEC_WDMA>, + <&iommu MT2701_M4U_PORT_JPGDEC_BSDMA>; + }; + vdecsys: syscon@16000000 { compatible = "mediatek,mt2701-vdecsys", "syscon"; reg = <0 0x16000000 0 0x1000>; -- cgit v1.2.3 From 729b7f8dbdaff270c53052897ea06486221a49a2 Mon Sep 17 00:00:00 2001 From: Jun Gao Date: Fri, 26 May 2017 15:35:07 +0800 Subject: arm: dts: Add Mediatek MT2701 i2c device node Add MT2701 i2c device node. Signed-off-by: Jun Gao Signed-off-by: Matthias Brugger --- arch/arm/boot/dts/mt2701-evb.dts | 42 ++++++++++++++++++++++++++++++++++++++++ arch/arm/boot/dts/mt2701.dtsi | 42 ++++++++++++++++++++++++++++++++++++++++ 2 files changed, 84 insertions(+) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/mt2701-evb.dts b/arch/arm/boot/dts/mt2701-evb.dts index 0474fd2d602b..98bf12c141cb 100644 --- a/arch/arm/boot/dts/mt2701-evb.dts +++ b/arch/arm/boot/dts/mt2701-evb.dts @@ -28,7 +28,49 @@ status = "okay"; }; +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_a>; + status = "okay"; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins_a>; + status = "okay"; +}; + &pio { + i2c0_pins_a: i2c0@0 { + pins1 { + pinmux = , + ; + bias-disable; + }; + }; + + i2c1_pins_a: i2c1@0 { + pins1 { + pinmux = , + ; + bias-disable; + }; + }; + + i2c2_pins_a: i2c2@0 { + pins1 { + pinmux = , + ; + bias-disable; + }; + }; + spi_pins_a: spi0@0 { pins_spi { pinmux = , diff --git a/arch/arm/boot/dts/mt2701.dtsi b/arch/arm/boot/dts/mt2701.dtsi index 15537bc47d48..50a483ce5c47 100644 --- a/arch/arm/boot/dts/mt2701.dtsi +++ b/arch/arm/boot/dts/mt2701.dtsi @@ -297,6 +297,48 @@ status = "disabled"; }; + i2c0: i2c@11007000 { + compatible = "mediatek,mt2701-i2c", + "mediatek,mt6577-i2c"; + reg = <0 0x11007000 0 0x70>, + <0 0x11000200 0 0x80>; + interrupts = ; + clock-div = <16>; + clocks = <&pericfg CLK_PERI_I2C0>, <&pericfg CLK_PERI_AP_DMA>; + clock-names = "main", "dma"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c1: i2c@11008000 { + compatible = "mediatek,mt2701-i2c", + "mediatek,mt6577-i2c"; + reg = <0 0x11008000 0 0x70>, + <0 0x11000280 0 0x80>; + interrupts = ; + clock-div = <16>; + clocks = <&pericfg CLK_PERI_I2C1>, <&pericfg CLK_PERI_AP_DMA>; + clock-names = "main", "dma"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c2: i2c@11009000 { + compatible = "mediatek,mt2701-i2c", + "mediatek,mt6577-i2c"; + reg = <0 0x11009000 0 0x70>, + <0 0x11000300 0 0x80>; + interrupts = ; + clock-div = <16>; + clocks = <&pericfg CLK_PERI_I2C2>, <&pericfg CLK_PERI_AP_DMA>; + clock-names = "main", "dma"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + spi0: spi@1100a000 { compatible = "mediatek,mt2701-spi"; #address-cells = <1>; -- cgit v1.2.3 From 5e7e276a9c3fa4a33aee712f5e28776140895775 Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Wed, 24 May 2017 11:43:41 +0300 Subject: ARM: dts: am43xx-clocks: Add support for CLKOUT2 Add the needed clock nodes for the CLKOUT2 to be usable by boards. Signed-off-by: Peter Ujfalusi Acked-by: Tero Kristo Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/am43xx-clocks.dtsi | 36 ++++++++++++++++++++++++++++++++++++ 1 file changed, 36 insertions(+) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/am43xx-clocks.dtsi b/arch/arm/boot/dts/am43xx-clocks.dtsi index d1d73b725f47..430be5829f8f 100644 --- a/arch/arm/boot/dts/am43xx-clocks.dtsi +++ b/arch/arm/boot/dts/am43xx-clocks.dtsi @@ -833,4 +833,40 @@ ti,bit-shift = <23>; reg = <0x4100>; }; + + clkout2_src_mux_ck: clkout2_src_mux_ck { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&clk_rc32k_ck>, <&sysclk_div>, <&dpll_ddr_m2_ck>, + <&dpll_per_m2_ck>, <&dpll_disp_m2_ck>, + <&dpll_mpu_m2_ck>, <&dpll_extdev_ck>; + reg = <0x4108>; + }; + + clkout2_pre_div_ck: clkout2_pre_div_ck { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&clkout2_src_mux_ck>; + ti,bit-shift = <4>; + ti,max-div = <8>; + reg = <0x4108>; + }; + + clkout2_post_div_ck: clkout2_post_div_ck { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&clkout2_pre_div_ck>; + ti,bit-shift = <8>; + ti,max-div = <32>; + ti,index-power-of-two; + reg = <0x4108>; + }; + + clkout2_ck: clkout2_ck { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clocks = <&clkout2_post_div_ck>; + ti,bit-shift = <16>; + reg = <0x4108>; + }; }; -- cgit v1.2.3 From 2ed2388bc0c5b7d04c7b079d673ce61a0333c818 Mon Sep 17 00:00:00 2001 From: Jagan Teki Date: Tue, 30 May 2017 17:42:50 +0000 Subject: ARM: dts: sun8i: h3: Add initial NanoPi M1 Plus support NanoPi M1 Plus is designed and developed by FriendlyElec for professionals, enterprise users, makers and hobbyists using the Allwinner H3 SOC. NanoPi M1 Plus key features - Allwinner H3, Quad-core Cortex-A7@1.2GHz - 1GB DDR3 RAM - 8GB eMMC - microSD slot - 10/100/1000M Ethernet - Serial Debug Port - 5V 2A DC power-supply Signed-off-by: Jagan Teki Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts | 64 +++++++++++++++++++++++++++ 2 files changed, 65 insertions(+) create mode 100644 arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 929a4167fcaa..2d9b5b0b5747 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -895,6 +895,7 @@ dtb-$(CONFIG_MACH_SUN8I) += \ sun8i-h3-bananapi-m2-plus.dtb \ sun8i-h3-beelink-x2.dtb \ sun8i-h3-nanopi-m1.dtb \ + sun8i-h3-nanopi-m1-plus.dtb \ sun8i-h3-nanopi-neo.dtb \ sun8i-h3-nanopi-neo-air.dtb \ sun8i-h3-orangepi-2.dtb \ diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts b/arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts new file mode 100644 index 000000000000..8ddd1b2cc097 --- /dev/null +++ b/arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts @@ -0,0 +1,64 @@ +/* + * Copyright (C) 2017 Jagan Teki + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include "sun8i-h3-nanopi.dtsi" + +/ { + model = "FriendlyArm NanoPi M1 Plus"; + compatible = "friendlyarm,nanopi-m1-plus", "allwinner,sun8i-h3"; +}; + +&ehci1 { + status = "okay"; +}; + +&ehci2 { + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; + +&ohci2 { + status = "okay"; +}; -- cgit v1.2.3 From 23c0c210a1adcfca27a52808d1a0cbd807e86518 Mon Sep 17 00:00:00 2001 From: Randy Li Date: Tue, 30 May 2017 23:52:46 +0800 Subject: ARM: dts: rockchip: add adc button for Firefly The only adc button connected to adc input is recovery button. Signed-off-by: Randy Li Signed-off-by: Heiko Stuebner --- arch/arm/boot/dts/rk3288-firefly-reload.dts | 17 +++++++++++++++++ arch/arm/boot/dts/rk3288-firefly.dtsi | 13 +++++++++++++ 2 files changed, 30 insertions(+) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/rk3288-firefly-reload.dts b/arch/arm/boot/dts/rk3288-firefly-reload.dts index d0b3204a4799..b11a282c334c 100644 --- a/arch/arm/boot/dts/rk3288-firefly-reload.dts +++ b/arch/arm/boot/dts/rk3288-firefly-reload.dts @@ -48,6 +48,19 @@ model = "Firefly-RK3288-reload"; compatible = "firefly,firefly-rk3288-reload", "rockchip,rk3288"; + adc-keys { + compatible = "adc-keys"; + io-channels = <&saradc 1>; + io-channel-names = "buttons"; + keyup-threshold-microvolt = <1800000>; + + button-recovery { + label = "Recovery"; + linux,code = ; + press-threshold-microvolt = <0>; + }; + }; + gpio-keys { compatible = "gpio-keys"; @@ -246,6 +259,10 @@ status = "okay"; }; +&saradc { + status = "okay"; +}; + &sdmmc { bus-width = <4>; cap-mmc-highspeed; diff --git a/arch/arm/boot/dts/rk3288-firefly.dtsi b/arch/arm/boot/dts/rk3288-firefly.dtsi index 864747342e3e..32dabae12e67 100644 --- a/arch/arm/boot/dts/rk3288-firefly.dtsi +++ b/arch/arm/boot/dts/rk3288-firefly.dtsi @@ -49,6 +49,19 @@ reg = <0 0x80000000>; }; + adc-keys { + compatible = "adc-keys"; + io-channels = <&saradc 1>; + io-channel-names = "buttons"; + keyup-threshold-microvolt = <1800000>; + + button-recovery { + label = "Recovery"; + linux,code = ; + press-threshold-microvolt = <0>; + }; + }; + dovdd_1v8: dovdd-1v8-regulator { compatible = "regulator-fixed"; regulator-name = "dovdd_1v8"; -- cgit v1.2.3 From f46b563f2f270e451b2e1cee78573508cc1de256 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Wed, 24 May 2017 11:07:48 +0200 Subject: ARM: dts: augment Moxa and Aspeed DTS for FTTMR010 This augments the Moxa Art and Aspeed device trees to: - Explicitly name the clock "PCLK" as the Faraday FTTMR010 names it. - List the Moxa timer as compatible with the Faradat FTTMR010 vanilla version. - Add a comment that the Aspeed driver is a Faraday FTTMR010 derivative. - Pass all IRQs to the timer from Aspeed: they are all there so they should be in the device tree, we only use the first one anyways. Tested-by: Joel Stanley Tested-by: Jonas Jensen Signed-off-by: Linus Walleij Signed-off-by: Olof Johansson --- arch/arm/boot/dts/aspeed-g4.dtsi | 7 +++---- arch/arm/boot/dts/aspeed-g5.dtsi | 7 +++---- arch/arm/boot/dts/moxart.dtsi | 3 ++- 3 files changed, 8 insertions(+), 9 deletions(-) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed-g4.dtsi index 8c6bc29eb7f6..8a04c7e2d818 100644 --- a/arch/arm/boot/dts/aspeed-g4.dtsi +++ b/arch/arm/boot/dts/aspeed-g4.dtsi @@ -886,13 +886,12 @@ }; timer: timer@1e782000 { + /* This timer is a Faraday FTTMR010 derivative */ compatible = "aspeed,ast2400-timer"; reg = <0x1e782000 0x90>; - // The moxart_timer driver registers only one - // interrupt and assumes it's for timer 1 - //interrupts = <16 17 18 35 36 37 38 39>; - interrupts = <16>; + interrupts = <16 17 18 35 36 37 38 39>; clocks = <&clk_apb>; + clock-names = "PCLK"; }; wdt1: wdt@1e785000 { diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi index a0bea4a6ec77..9cffe347b828 100644 --- a/arch/arm/boot/dts/aspeed-g5.dtsi +++ b/arch/arm/boot/dts/aspeed-g5.dtsi @@ -993,13 +993,12 @@ }; timer: timer@1e782000 { + /* This timer is a Faraday FTTMR010 derivative */ compatible = "aspeed,ast2400-timer"; reg = <0x1e782000 0x90>; - // The moxart_timer driver registers only one - // interrupt and assumes it's for timer 1 - //interrupts = <16 17 18 35 36 37 38 39>; - interrupts = <16>; + interrupts = <16 17 18 35 36 37 38 39>; clocks = <&clk_apb>; + clock-names = "PCLK"; }; diff --git a/arch/arm/boot/dts/moxart.dtsi b/arch/arm/boot/dts/moxart.dtsi index e86f8c905ac5..1f4c795d3f72 100644 --- a/arch/arm/boot/dts/moxart.dtsi +++ b/arch/arm/boot/dts/moxart.dtsi @@ -58,10 +58,11 @@ }; timer: timer@98400000 { - compatible = "moxa,moxart-timer"; + compatible = "moxa,moxart-timer", "faraday,fttmr010"; reg = <0x98400000 0x42>; interrupts = <19 IRQ_TYPE_EDGE_FALLING>; clocks = <&clk_apb>; + clock-names = "PCLK"; }; gpio: gpio@98700000 { -- cgit v1.2.3 From 3880af4541a178b38cce0456c9afa3ab96534e90 Mon Sep 17 00:00:00 2001 From: William Wu Date: Fri, 2 Jun 2017 15:04:24 +0800 Subject: ARM: dts: rockchip: add usb nodes on rk322x This patch adds usb otg/host controllers and phys nodes on rk322x. Signed-off-by: William Wu Signed-off-by: Heiko Stuebner --- arch/arm/boot/dts/rk322x.dtsi | 138 +++++++++++++++++++++++++++++++++++++++++- 1 file changed, 137 insertions(+), 1 deletion(-) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/rk322x.dtsi b/arch/arm/boot/dts/rk322x.dtsi index df574135797a..f3e4ffd9f818 100644 --- a/arch/arm/boot/dts/rk322x.dtsi +++ b/arch/arm/boot/dts/rk322x.dtsi @@ -210,8 +210,61 @@ }; grf: syscon@11000000 { - compatible = "syscon"; + compatible = "syscon", "simple-mfd"; reg = <0x11000000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + + u2phy0: usb2-phy@760 { + compatible = "rockchip,rk3228-usb2phy"; + reg = <0x0760 0x0c>; + clocks = <&cru SCLK_OTGPHY0>; + clock-names = "phyclk"; + clock-output-names = "usb480m_phy0"; + #clock-cells = <0>; + status = "disabled"; + + u2phy0_otg: otg-port { + interrupts = , + , + ; + interrupt-names = "otg-bvalid", "otg-id", + "linestate"; + #phy-cells = <0>; + status = "disabled"; + }; + + u2phy0_host: host-port { + interrupts = ; + interrupt-names = "linestate"; + #phy-cells = <0>; + status = "disabled"; + }; + }; + + u2phy1: usb2-phy@800 { + compatible = "rockchip,rk3228-usb2phy"; + reg = <0x0800 0x0c>; + clocks = <&cru SCLK_OTGPHY1>; + clock-names = "phyclk"; + clock-output-names = "usb480m_phy1"; + #clock-cells = <0>; + status = "disabled"; + + u2phy1_otg: otg-port { + interrupts = ; + interrupt-names = "linestate"; + #phy-cells = <0>; + status = "disabled"; + }; + + u2phy1_host: host-port { + interrupts = ; + interrupt-names = "linestate"; + #phy-cells = <0>; + status = "disabled"; + }; + }; }; uart0: serial@11010000 { @@ -467,6 +520,89 @@ status = "disabled"; }; + usb_otg: usb@30040000 { + compatible = "rockchip,rk3228-usb", "rockchip,rk3066-usb", + "snps,dwc2"; + reg = <0x30040000 0x40000>; + interrupts = ; + clocks = <&cru HCLK_OTG>; + clock-names = "otg"; + dr_mode = "otg"; + g-np-tx-fifo-size = <16>; + g-rx-fifo-size = <280>; + g-tx-fifo-size = <256 128 128 64 32 16>; + g-use-dma; + phys = <&u2phy0_otg>; + phy-names = "usb2-phy"; + status = "disabled"; + }; + + usb_host0_ehci: usb@30080000 { + compatible = "generic-ehci"; + reg = <0x30080000 0x20000>; + interrupts = ; + clocks = <&cru HCLK_HOST0>, <&u2phy0>; + clock-names = "usbhost", "utmi"; + phys = <&u2phy0_host>; + phy-names = "usb"; + status = "disabled"; + }; + + usb_host0_ohci: usb@300a0000 { + compatible = "generic-ohci"; + reg = <0x300a0000 0x20000>; + interrupts = ; + clocks = <&cru HCLK_HOST0>, <&u2phy0>; + clock-names = "usbhost", "utmi"; + phys = <&u2phy0_host>; + phy-names = "usb"; + status = "disabled"; + }; + + usb_host1_ehci: usb@300c0000 { + compatible = "generic-ehci"; + reg = <0x300c0000 0x20000>; + interrupts = ; + clocks = <&cru HCLK_HOST1>, <&u2phy1>; + clock-names = "usbhost", "utmi"; + phys = <&u2phy1_otg>; + phy-names = "usb"; + status = "disabled"; + }; + + usb_host1_ohci: usb@300e0000 { + compatible = "generic-ohci"; + reg = <0x300e0000 0x20000>; + interrupts = ; + clocks = <&cru HCLK_HOST1>, <&u2phy1>; + clock-names = "usbhost", "utmi"; + phys = <&u2phy1_otg>; + phy-names = "usb"; + status = "disabled"; + }; + + usb_host2_ehci: usb@30100000 { + compatible = "generic-ehci"; + reg = <0x30100000 0x20000>; + interrupts = ; + clocks = <&cru HCLK_HOST2>, <&u2phy1>; + phys = <&u2phy1_host>; + phy-names = "usb"; + clock-names = "usbhost", "utmi"; + status = "disabled"; + }; + + usb_host2_ohci: usb@30120000 { + compatible = "generic-ohci"; + reg = <0x30120000 0x20000>; + interrupts = ; + clocks = <&cru HCLK_HOST2>, <&u2phy1>; + clock-names = "usbhost", "utmi"; + phys = <&u2phy1_host>; + phy-names = "usb"; + status = "disabled"; + }; + gmac: ethernet@30200000 { compatible = "rockchip,rk3228-gmac"; reg = <0x30200000 0x10000>; -- cgit v1.2.3 From 81b61d37705173b8b9eb52c4566a8fc7c7099520 Mon Sep 17 00:00:00 2001 From: William Wu Date: Fri, 2 Jun 2017 15:04:25 +0800 Subject: ARM: dts: rockchip: enable usb for rk3229 evb board Rockchip's rk3229 evaluation board has one usb otg controller and three usb host controllers. Each usb controller connect with one usb2 phy port through UTMI+ interface. And the three usb host interfaces use the same GPIO VBUS drive. Let's enable them to support usb on rk3229 evb board. Signed-off-by: William Wu Signed-off-by: Heiko Stuebner --- arch/arm/boot/dts/rk3229-evb.dts | 74 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 74 insertions(+) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/rk3229-evb.dts b/arch/arm/boot/dts/rk3229-evb.dts index 275092a950ef..1b55192b7d04 100644 --- a/arch/arm/boot/dts/rk3229-evb.dts +++ b/arch/arm/boot/dts/rk3229-evb.dts @@ -58,6 +58,17 @@ #clock-cells = <0>; }; + vcc_host: vcc-host-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio3 RK_PC4 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&host_vbus_drv>; + regulator-name = "vcc_host"; + regulator-always-on; + regulator-boot-on; + }; + vcc_phy: vcc-phy-regulator { compatible = "regulator-fixed"; enable-active-high; @@ -85,6 +96,69 @@ status = "okay"; }; +&pinctrl { + usb { + host_vbus_drv: host-vbus-drv { + rockchip,pins = <3 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + &uart2 { status = "okay"; }; + +&u2phy0 { + status = "okay"; + + u2phy0_otg: otg-port { + status = "okay"; + }; + + u2phy0_host: host-port { + phy-supply = <&vcc_host>; + status = "okay"; + }; +}; + +&u2phy1 { + status = "okay"; + + u2phy1_otg: otg-port { + phy-supply = <&vcc_host>; + status = "okay"; + }; + + u2phy1_host: host-port { + phy-supply = <&vcc_host>; + status = "okay"; + }; +}; + +&usb_host0_ehci { + status = "okay"; +}; + +&usb_host0_ohci { + status = "okay"; +}; + +&usb_host1_ehci { + status = "okay"; +}; + +&usb_host1_ohci { + status = "okay"; +}; + +&usb_host2_ehci { + status = "okay"; +}; + +&usb_host2_ohci { + status = "okay"; +}; + +&usb_otg { + status = "okay"; +}; -- cgit v1.2.3 From 5343b1579247875ccfa88778e8db17e181c9f3fe Mon Sep 17 00:00:00 2001 From: Marek Szyprowski Date: Wed, 31 May 2017 13:00:17 +0200 Subject: ARM: dts: exynos: Add HDMI CEC device to Exynos5 SoC family Exynos5250 and Exynos542x SoCs have the same CEC hardware module as Exynos4 SoC series, so enable support for it using the same compatible string. Tested on Odroid XU3 (Exynos5422) and Google Snow (Exynos5250) boards. Signed-off-by: Marek Szyprowski Signed-off-by: Krzysztof Kozlowski --- arch/arm/boot/dts/exynos5250-pinctrl.dtsi | 7 +++++++ arch/arm/boot/dts/exynos5250-snow-common.dtsi | 4 ++++ arch/arm/boot/dts/exynos5250.dtsi | 13 +++++++++++++ arch/arm/boot/dts/exynos5420-pinctrl.dtsi | 7 +++++++ arch/arm/boot/dts/exynos5420.dtsi | 13 +++++++++++++ arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi | 4 ++++ 6 files changed, 48 insertions(+) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/exynos5250-pinctrl.dtsi b/arch/arm/boot/dts/exynos5250-pinctrl.dtsi index 2f6ab32b5954..1fd122db18e6 100644 --- a/arch/arm/boot/dts/exynos5250-pinctrl.dtsi +++ b/arch/arm/boot/dts/exynos5250-pinctrl.dtsi @@ -589,6 +589,13 @@ samsung,pin-pud = ; samsung,pin-drv = ; }; + + hdmi_cec: hdmi-cec { + samsung,pins = "gpx3-6"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; + }; }; &pinctrl_1 { diff --git a/arch/arm/boot/dts/exynos5250-snow-common.dtsi b/arch/arm/boot/dts/exynos5250-snow-common.dtsi index 8f3a80430748..e1d293dbbe5d 100644 --- a/arch/arm/boot/dts/exynos5250-snow-common.dtsi +++ b/arch/arm/boot/dts/exynos5250-snow-common.dtsi @@ -272,6 +272,10 @@ vdd_pll-supply = <&ldo8_reg>; }; +&hdmicec { + status = "okay"; +}; + &i2c_0 { status = "okay"; samsung,i2c-sda-delay = <100>; diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi index 79c9c885613a..fbdc1d53a2ce 100644 --- a/arch/arm/boot/dts/exynos5250.dtsi +++ b/arch/arm/boot/dts/exynos5250.dtsi @@ -689,6 +689,19 @@ samsung,syscon-phandle = <&pmu_system_controller>; }; + hdmicec: cec@101B0000 { + compatible = "samsung,s5p-cec"; + reg = <0x101B0000 0x200>; + interrupts = ; + clocks = <&clock CLK_HDMI_CEC>; + clock-names = "hdmicec"; + samsung,syscon-phandle = <&pmu_system_controller>; + hdmi-phandle = <&hdmi>; + pinctrl-names = "default"; + pinctrl-0 = <&hdmi_cec>; + status = "disabled"; + }; + mixer@14450000 { compatible = "samsung,exynos5250-mixer"; reg = <0x14450000 0x10000>; diff --git a/arch/arm/boot/dts/exynos5420-pinctrl.dtsi b/arch/arm/boot/dts/exynos5420-pinctrl.dtsi index 3924b4fafe72..65aa0e300c23 100644 --- a/arch/arm/boot/dts/exynos5420-pinctrl.dtsi +++ b/arch/arm/boot/dts/exynos5420-pinctrl.dtsi @@ -67,6 +67,13 @@ samsung,pin-pud = ; samsung,pin-drv = ; }; + + hdmi_cec: hdmi-cec { + samsung,pins = "gpx3-6"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; + }; }; &pinctrl_1 { diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi index 0db0bcf8da36..acd77b10b3df 100644 --- a/arch/arm/boot/dts/exynos5420.dtsi +++ b/arch/arm/boot/dts/exynos5420.dtsi @@ -624,6 +624,19 @@ reg = <0x145D0000 0x20>; }; + hdmicec: cec@101B0000 { + compatible = "samsung,s5p-cec"; + reg = <0x101B0000 0x200>; + interrupts = ; + clocks = <&clock CLK_HDMI_CEC>; + clock-names = "hdmicec"; + samsung,syscon-phandle = <&pmu_system_controller>; + hdmi-phandle = <&hdmi>; + pinctrl-names = "default"; + pinctrl-0 = <&hdmi_cec>; + status = "disabled"; + }; + mixer: mixer@14450000 { compatible = "samsung,exynos5420-mixer"; reg = <0x14450000 0x10000>; diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi index 657535e2e3cc..f92f95741207 100644 --- a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi +++ b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi @@ -264,6 +264,10 @@ vdd-supply = <&ldo6_reg>; }; +&hdmicec { + status = "okay"; +}; + &hsi2c_4 { status = "okay"; -- cgit v1.2.3 From c80aec5e0596858f8e8b26fb4844969ea5eb66e7 Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Wed, 31 May 2017 15:58:20 +0800 Subject: ARM: sun8i: a83t: Add device node for PRCM The A83T's PRCM has the same set of clocks and resets as the A64. However, a few dividers are different. And due to the lack of a low speed 32.768 kHz oscillator, a few of the clock parents are different. The PRCM also has controls for various power domains. These are not supported yet, neither in software nor in the device tree binding. Signed-off-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun8i-a83t.dtsi | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/sun8i-a83t.dtsi b/arch/arm/boot/dts/sun8i-a83t.dtsi index 1dc4cfe81534..49aeb56970ba 100644 --- a/arch/arm/boot/dts/sun8i-a83t.dtsi +++ b/arch/arm/boot/dts/sun8i-a83t.dtsi @@ -270,5 +270,15 @@ #interrupt-cells = <3>; interrupts = ; }; + + r_ccu: clock@1f01400 { + compatible = "allwinner,sun8i-a83t-r-ccu"; + reg = <0x01f01400 0x400>; + clocks = <&osc24M>, <&osc16Md512>, <&osc16M>, + <&ccu 6>; + clock-names = "hosc", "losc", "iosc", "pll-periph"; + #clock-cells = <1>; + #reset-cells = <1>; + }; }; }; -- cgit v1.2.3 From 37de44f238d37c96ab1fec8c88b6d207f5b85635 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Sat, 27 May 2017 10:17:52 -0300 Subject: ARM: dts: imx7: Fix typo in watchdog pin name Change "WDOD1" to "WDOG1" in watchdog pin names. Signed-off-by: Fabio Estevam Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx7d-nitrogen7.dts | 2 +- arch/arm/boot/dts/imx7d-pico.dts | 2 +- arch/arm/boot/dts/imx7d-pinfunc.h | 6 +++--- arch/arm/boot/dts/imx7d-sdb.dts | 2 +- arch/arm/boot/dts/imx7s-warp.dts | 2 +- 5 files changed, 7 insertions(+), 7 deletions(-) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/imx7d-nitrogen7.dts b/arch/arm/boot/dts/imx7d-nitrogen7.dts index dd40e49f6c42..e7998308861f 100644 --- a/arch/arm/boot/dts/imx7d-nitrogen7.dts +++ b/arch/arm/boot/dts/imx7d-nitrogen7.dts @@ -738,7 +738,7 @@ pinctrl_wdog1: wdog1grp { fsl,pins = < - MX7D_PAD_LPSR_GPIO1_IO00__WDOD1_WDOG_B 0x75 + MX7D_PAD_LPSR_GPIO1_IO00__WDOG1_WDOG_B 0x75 >; }; }; diff --git a/arch/arm/boot/dts/imx7d-pico.dts b/arch/arm/boot/dts/imx7d-pico.dts index 79b5d83aaace..e78c2c9cc28a 100644 --- a/arch/arm/boot/dts/imx7d-pico.dts +++ b/arch/arm/boot/dts/imx7d-pico.dts @@ -397,7 +397,7 @@ &iomuxc_lpsr { pinctrl_wdog: wdoggrp { fsl,pins = < - MX7D_PAD_LPSR_GPIO1_IO00__WDOD1_WDOG_B 0x74 + MX7D_PAD_LPSR_GPIO1_IO00__WDOG1_WDOG_B 0x74 >; }; }; diff --git a/arch/arm/boot/dts/imx7d-pinfunc.h b/arch/arm/boot/dts/imx7d-pinfunc.h index f6f7e78f8820..f2493bc63da4 100644 --- a/arch/arm/boot/dts/imx7d-pinfunc.h +++ b/arch/arm/boot/dts/imx7d-pinfunc.h @@ -17,9 +17,9 @@ #define MX7D_PAD_LPSR_GPIO1_IO00__GPIO1_IO0 0x0000 0x0030 0x0000 0x0 0x0 #define MX7D_PAD_LPSR_GPIO1_IO00__PWM4_OUT 0x0000 0x0030 0x0000 0x1 0x0 -#define MX7D_PAD_LPSR_GPIO1_IO00__WDOD1_WDOG_ANY 0x0000 0x0030 0x0000 0x2 0x0 -#define MX7D_PAD_LPSR_GPIO1_IO00__WDOD1_WDOG_B 0x0000 0x0030 0x0000 0x3 0x0 -#define MX7D_PAD_LPSR_GPIO1_IO00__WDOD1_WDOG__RST_B_DEB 0x0000 0x0030 0x0000 0x4 0x0 +#define MX7D_PAD_LPSR_GPIO1_IO00__WDOG1_WDOG_ANY 0x0000 0x0030 0x0000 0x2 0x0 +#define MX7D_PAD_LPSR_GPIO1_IO00__WDOG1_WDOG_B 0x0000 0x0030 0x0000 0x3 0x0 +#define MX7D_PAD_LPSR_GPIO1_IO00__WDOG1_WDOG__RST_B_DEB 0x0000 0x0030 0x0000 0x4 0x0 #define MX7D_PAD_LPSR_GPIO1_IO01__GPIO1_IO1 0x0004 0x0034 0x0000 0x0 0x0 #define MX7D_PAD_LPSR_GPIO1_IO01__PWM1_OUT 0x0004 0x0034 0x0000 0x1 0x0 #define MX7D_PAD_LPSR_GPIO1_IO01__CCM_ENET_REF_CLK3 0x0004 0x0034 0x0000 0x2 0x0 diff --git a/arch/arm/boot/dts/imx7d-sdb.dts b/arch/arm/boot/dts/imx7d-sdb.dts index 77c400f0017a..4a4b522d17d2 100644 --- a/arch/arm/boot/dts/imx7d-sdb.dts +++ b/arch/arm/boot/dts/imx7d-sdb.dts @@ -660,7 +660,7 @@ &iomuxc_lpsr { pinctrl_wdog: wdoggrp { fsl,pins = < - MX7D_PAD_LPSR_GPIO1_IO00__WDOD1_WDOG_B 0x74 + MX7D_PAD_LPSR_GPIO1_IO00__WDOG1_WDOG_B 0x74 >; }; diff --git a/arch/arm/boot/dts/imx7s-warp.dts b/arch/arm/boot/dts/imx7s-warp.dts index 8dfed85471e1..07b63f8b7314 100644 --- a/arch/arm/boot/dts/imx7s-warp.dts +++ b/arch/arm/boot/dts/imx7s-warp.dts @@ -443,7 +443,7 @@ &iomuxc_lpsr { pinctrl_wdog: wdoggrp { fsl,pins = < - MX7D_PAD_LPSR_GPIO1_IO00__WDOD1_WDOG_B 0x74 + MX7D_PAD_LPSR_GPIO1_IO00__WDOG1_WDOG_B 0x74 >; }; }; -- cgit v1.2.3 From 12de44f55dcd99f740c19fa514c181be5c686625 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Sun, 4 Jun 2017 14:31:15 -0300 Subject: ARM: dts: imx: Fix Ethernet PHY reset polarity The FEC driver ignores the GPIO polarity from 'phy-reset-gpios' and considers that the Ethernet PHY is active low, unless the property 'phy-reset-active-high' is present. Fix the device tree description by explicitly passing the 'GPIO_ACTIVE_LOW' flag to the 'phy-reset-gpios' property. Signed-off-by: Fabio Estevam Reviewed-by: Andrew Lunn Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx25-karo-tx25.dts | 2 +- arch/arm/boot/dts/imx25-pdk.dts | 2 +- arch/arm/boot/dts/imx25.dtsi | 1 + arch/arm/boot/dts/imx28-cfa10037.dts | 2 +- arch/arm/boot/dts/imx28-cfa10049.dts | 2 +- arch/arm/boot/dts/imx28-cfa10057.dts | 2 +- arch/arm/boot/dts/imx28-cfa10058.dts | 2 +- arch/arm/boot/dts/imx28-eukrea-mbmx287lc.dts | 2 +- arch/arm/boot/dts/imx28-evk.dts | 2 +- arch/arm/boot/dts/imx28-m28cu3.dts | 2 +- arch/arm/boot/dts/imx50-evk.dts | 2 +- arch/arm/boot/dts/imx50.dtsi | 1 + arch/arm/boot/dts/imx51-apf51.dts | 2 +- arch/arm/boot/dts/imx53-mba53.dts | 2 +- arch/arm/boot/dts/imx53-qsb-common.dtsi | 2 +- arch/arm/boot/dts/imx53-smd.dts | 2 +- arch/arm/boot/dts/imx53-tx53.dtsi | 2 +- arch/arm/boot/dts/imx53-voipac-dmm-668.dtsi | 2 +- arch/arm/boot/dts/imx6dl-riotboard.dts | 2 +- arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts | 2 +- arch/arm/boot/dts/imx6q-evi.dts | 2 +- arch/arm/boot/dts/imx6q-gw5400-a.dts | 2 +- arch/arm/boot/dts/imx6q-novena.dts | 2 +- arch/arm/boot/dts/imx6qdl-aristainetos.dtsi | 2 +- arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi | 2 +- arch/arm/boot/dts/imx6qdl-microsom-ar8035.dtsi | 2 +- arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi | 2 +- arch/arm/boot/dts/imx6qdl-sabresd.dtsi | 2 +- arch/arm/boot/dts/imx6qdl-tx6.dtsi | 2 +- arch/arm/boot/dts/imx6qdl-wandboard.dtsi | 2 +- arch/arm/boot/dts/imx6ul-tx6ul-mainboard.dts | 2 +- arch/arm/boot/dts/imx6ul-tx6ul.dtsi | 4 ++-- 32 files changed, 33 insertions(+), 31 deletions(-) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/imx25-karo-tx25.dts b/arch/arm/boot/dts/imx25-karo-tx25.dts index 9b31faa96377..30a62d4be8d9 100644 --- a/arch/arm/boot/dts/imx25-karo-tx25.dts +++ b/arch/arm/boot/dts/imx25-karo-tx25.dts @@ -97,7 +97,7 @@ &fec { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_fec>; - phy-reset-gpios = <&gpio3 7 0>; + phy-reset-gpios = <&gpio3 7 GPIO_ACTIVE_LOW>; phy-mode = "rmii"; phy-supply = <®_fec_phy>; status = "okay"; diff --git a/arch/arm/boot/dts/imx25-pdk.dts b/arch/arm/boot/dts/imx25-pdk.dts index d921dd2ed676..c52692821fb1 100644 --- a/arch/arm/boot/dts/imx25-pdk.dts +++ b/arch/arm/boot/dts/imx25-pdk.dts @@ -125,7 +125,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_fec>; phy-supply = <®_fec_3v3>; - phy-reset-gpios = <&gpio4 8 0>; + phy-reset-gpios = <&gpio4 8 GPIO_ACTIVE_LOW>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx25.dtsi b/arch/arm/boot/dts/imx25.dtsi index 0cdf333336cd..dfcc8e00cf1c 100644 --- a/arch/arm/boot/dts/imx25.dtsi +++ b/arch/arm/boot/dts/imx25.dtsi @@ -9,6 +9,7 @@ * http://www.gnu.org/copyleft/gpl.html */ +#include #include "imx25-pinfunc.h" / { diff --git a/arch/arm/boot/dts/imx28-cfa10037.dts b/arch/arm/boot/dts/imx28-cfa10037.dts index e5beaa58bb40..3d13b321d27b 100644 --- a/arch/arm/boot/dts/imx28-cfa10037.dts +++ b/arch/arm/boot/dts/imx28-cfa10037.dts @@ -64,7 +64,7 @@ pinctrl-names = "default"; pinctrl-0 = <&mac0_pins_a &mac0_pins_cfa10037>; - phy-reset-gpios = <&gpio2 21 0>; + phy-reset-gpios = <&gpio2 21 GPIO_ACTIVE_LOW>; phy-reset-duration = <100>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx28-cfa10049.dts b/arch/arm/boot/dts/imx28-cfa10049.dts index a9c347e48bcf..4cd52d53cf00 100644 --- a/arch/arm/boot/dts/imx28-cfa10049.dts +++ b/arch/arm/boot/dts/imx28-cfa10049.dts @@ -327,7 +327,7 @@ pinctrl-names = "default"; pinctrl-0 = <&mac0_pins_a &mac0_pins_cfa10049>; - phy-reset-gpios = <&gpio2 21 0>; + phy-reset-gpios = <&gpio2 21 GPIO_ACTIVE_LOW>; phy-reset-duration = <100>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx28-cfa10057.dts b/arch/arm/boot/dts/imx28-cfa10057.dts index 7a80bd686c40..c6067915b238 100644 --- a/arch/arm/boot/dts/imx28-cfa10057.dts +++ b/arch/arm/boot/dts/imx28-cfa10057.dts @@ -162,7 +162,7 @@ phy-mode = "rmii"; pinctrl-names = "default"; pinctrl-0 = <&mac0_pins_a>; - phy-reset-gpios = <&gpio2 21 0>; + phy-reset-gpios = <&gpio2 21 GPIO_ACTIVE_LOW>; phy-reset-duration = <100>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx28-cfa10058.dts b/arch/arm/boot/dts/imx28-cfa10058.dts index f5c6dce34abe..70c7bb4a5a0e 100644 --- a/arch/arm/boot/dts/imx28-cfa10058.dts +++ b/arch/arm/boot/dts/imx28-cfa10058.dts @@ -129,7 +129,7 @@ phy-mode = "rmii"; pinctrl-names = "default"; pinctrl-0 = <&mac0_pins_a>; - phy-reset-gpios = <&gpio2 21 0>; + phy-reset-gpios = <&gpio2 21 GPIO_ACTIVE_LOW>; phy-reset-duration = <100>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx28-eukrea-mbmx287lc.dts b/arch/arm/boot/dts/imx28-eukrea-mbmx287lc.dts index e773144e1e03..b61fd61eb1c7 100644 --- a/arch/arm/boot/dts/imx28-eukrea-mbmx287lc.dts +++ b/arch/arm/boot/dts/imx28-eukrea-mbmx287lc.dts @@ -31,7 +31,7 @@ phy-mode = "rmii"; pinctrl-names = "default"; pinctrl-0 = <&mac1_pins_a>; - phy-reset-gpios = <&gpio3 27 GPIO_ACTIVE_HIGH>; + phy-reset-gpios = <&gpio3 27 GPIO_ACTIVE_LOW>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx28-evk.dts b/arch/arm/boot/dts/imx28-evk.dts index b88c087f1fea..5309bb90d7d5 100644 --- a/arch/arm/boot/dts/imx28-evk.dts +++ b/arch/arm/boot/dts/imx28-evk.dts @@ -262,7 +262,7 @@ pinctrl-names = "default"; pinctrl-0 = <&mac0_pins_a>; phy-supply = <®_fec_3v3>; - phy-reset-gpios = <&gpio4 13 0>; + phy-reset-gpios = <&gpio4 13 GPIO_ACTIVE_LOW>; phy-reset-duration = <100>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx28-m28cu3.dts b/arch/arm/boot/dts/imx28-m28cu3.dts index bb5329479c62..9d6c8fe28d74 100644 --- a/arch/arm/boot/dts/imx28-m28cu3.dts +++ b/arch/arm/boot/dts/imx28-m28cu3.dts @@ -188,7 +188,7 @@ phy-mode = "rmii"; pinctrl-names = "default"; pinctrl-0 = <&mac0_pins_a>; - phy-reset-gpios = <&gpio4 13 0>; + phy-reset-gpios = <&gpio4 13 GPIO_ACTIVE_LOW>; phy-reset-duration = <100>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx50-evk.dts b/arch/arm/boot/dts/imx50-evk.dts index dba2d951aa15..98b5faa06e27 100644 --- a/arch/arm/boot/dts/imx50-evk.dts +++ b/arch/arm/boot/dts/imx50-evk.dts @@ -53,7 +53,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_fec>; phy-mode = "rmii"; - phy-reset-gpios = <&gpio4 12 0>; + phy-reset-gpios = <&gpio4 12 GPIO_ACTIVE_LOW>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx50.dtsi b/arch/arm/boot/dts/imx50.dtsi index 2a98afcd8a4e..3747d80104f4 100644 --- a/arch/arm/boot/dts/imx50.dtsi +++ b/arch/arm/boot/dts/imx50.dtsi @@ -12,6 +12,7 @@ */ #include "imx50-pinfunc.h" +#include #include / { diff --git a/arch/arm/boot/dts/imx51-apf51.dts b/arch/arm/boot/dts/imx51-apf51.dts index e88b2a6be079..c83ac1600322 100644 --- a/arch/arm/boot/dts/imx51-apf51.dts +++ b/arch/arm/boot/dts/imx51-apf51.dts @@ -36,7 +36,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_fec>; phy-mode = "mii"; - phy-reset-gpios = <&gpio3 0 GPIO_ACTIVE_HIGH>; + phy-reset-gpios = <&gpio3 0 GPIO_ACTIVE_LOW>; phy-reset-duration = <1>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx53-mba53.dts b/arch/arm/boot/dts/imx53-mba53.dts index 2e44d2aba14e..df705ba48897 100644 --- a/arch/arm/boot/dts/imx53-mba53.dts +++ b/arch/arm/boot/dts/imx53-mba53.dts @@ -195,7 +195,7 @@ }; &fec { - phy-reset-gpios = <&gpio7 6 0>; + phy-reset-gpios = <&gpio7 6 GPIO_ACTIVE_LOW>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx53-qsb-common.dtsi b/arch/arm/boot/dts/imx53-qsb-common.dtsi index 40b3e31935d0..683dcbe27cbd 100644 --- a/arch/arm/boot/dts/imx53-qsb-common.dtsi +++ b/arch/arm/boot/dts/imx53-qsb-common.dtsi @@ -344,7 +344,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_fec>; phy-mode = "rmii"; - phy-reset-gpios = <&gpio7 6 0>; + phy-reset-gpios = <&gpio7 6 GPIO_ACTIVE_LOW>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx53-smd.dts b/arch/arm/boot/dts/imx53-smd.dts index 472f6f0f55b3..33cb64fc8372 100644 --- a/arch/arm/boot/dts/imx53-smd.dts +++ b/arch/arm/boot/dts/imx53-smd.dts @@ -273,6 +273,6 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_fec>; phy-mode = "rmii"; - phy-reset-gpios = <&gpio7 6 0>; + phy-reset-gpios = <&gpio7 6 GPIO_ACTIVE_LOW>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx53-tx53.dtsi b/arch/arm/boot/dts/imx53-tx53.dtsi index 3a3220141988..7807c1fa1101 100644 --- a/arch/arm/boot/dts/imx53-tx53.dtsi +++ b/arch/arm/boot/dts/imx53-tx53.dtsi @@ -201,7 +201,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_fec>; phy-mode = "rmii"; - phy-reset-gpios = <&gpio7 6 GPIO_ACTIVE_HIGH>; + phy-reset-gpios = <&gpio7 6 GPIO_ACTIVE_LOW>; phy-handle = <&phy0>; mac-address = [000000000000]; /* placeholder; will be overwritten by bootloader */ status = "okay"; diff --git a/arch/arm/boot/dts/imx53-voipac-dmm-668.dtsi b/arch/arm/boot/dts/imx53-voipac-dmm-668.dtsi index 524192cf6a0f..df8dafe2564d 100644 --- a/arch/arm/boot/dts/imx53-voipac-dmm-668.dtsi +++ b/arch/arm/boot/dts/imx53-voipac-dmm-668.dtsi @@ -137,7 +137,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_fec>; phy-mode = "rmii"; - phy-reset-gpios = <&gpio4 2 0>; + phy-reset-gpios = <&gpio4 2 GPIO_ACTIVE_LOW>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6dl-riotboard.dts b/arch/arm/boot/dts/imx6dl-riotboard.dts index 2cb72824e800..29b45f2e64e0 100644 --- a/arch/arm/boot/dts/imx6dl-riotboard.dts +++ b/arch/arm/boot/dts/imx6dl-riotboard.dts @@ -94,7 +94,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; phy-mode = "rgmii"; - phy-reset-gpios = <&gpio3 31 0>; + phy-reset-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>; interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>, <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>; fsl,err006687-workaround-present; diff --git a/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts b/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts index f28883bbe7b1..0c5b2c38214e 100644 --- a/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts +++ b/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts @@ -118,7 +118,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; phy-mode = "rgmii"; - phy-reset-gpios = <&gpio1 25 0>; + phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>; phy-supply = <&vgen2_1v2_eth>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6q-evi.dts b/arch/arm/boot/dts/imx6q-evi.dts index fd2220aa49e2..1f0f950dc11e 100644 --- a/arch/arm/boot/dts/imx6q-evi.dts +++ b/arch/arm/boot/dts/imx6q-evi.dts @@ -135,7 +135,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; phy-mode = "rgmii"; - phy-reset-gpios = <&gpio1 25 0>; + phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>; interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>, <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>; fsl,err006687-workaround-present; diff --git a/arch/arm/boot/dts/imx6q-gw5400-a.dts b/arch/arm/boot/dts/imx6q-gw5400-a.dts index 687ab911c13f..9dbeea05a949 100644 --- a/arch/arm/boot/dts/imx6q-gw5400-a.dts +++ b/arch/arm/boot/dts/imx6q-gw5400-a.dts @@ -153,7 +153,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; phy-mode = "rgmii-id"; - phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>; + phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6q-novena.dts b/arch/arm/boot/dts/imx6q-novena.dts index 0fa32b2f3aec..c21db67349c4 100644 --- a/arch/arm/boot/dts/imx6q-novena.dts +++ b/arch/arm/boot/dts/imx6q-novena.dts @@ -217,7 +217,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet_novena>; phy-mode = "rgmii"; - phy-reset-gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>; + phy-reset-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>; rxc-skew-ps = <3000>; rxdv-skew-ps = <0>; txc-skew-ps = <3000>; diff --git a/arch/arm/boot/dts/imx6qdl-aristainetos.dtsi b/arch/arm/boot/dts/imx6qdl-aristainetos.dtsi index b2debc0aa720..7d64075204ae 100644 --- a/arch/arm/boot/dts/imx6qdl-aristainetos.dtsi +++ b/arch/arm/boot/dts/imx6qdl-aristainetos.dtsi @@ -118,7 +118,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; phy-mode = "rmii"; - phy-reset-gpios = <&gpio3 29 GPIO_ACTIVE_HIGH>; + phy-reset-gpios = <&gpio3 29 GPIO_ACTIVE_LOW>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi b/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi index ec68f1cace31..ed6a89f724a5 100644 --- a/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi +++ b/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi @@ -320,7 +320,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; phy-mode = "rgmii"; - phy-reset-gpios = <&gpio7 18 GPIO_ACTIVE_HIGH>; + phy-reset-gpios = <&gpio7 18 GPIO_ACTIVE_LOW>; txd0-skew-ps = <0>; txd1-skew-ps = <0>; txd2-skew-ps = <0>; diff --git a/arch/arm/boot/dts/imx6qdl-microsom-ar8035.dtsi b/arch/arm/boot/dts/imx6qdl-microsom-ar8035.dtsi index a9b207751a02..900e8c781f91 100644 --- a/arch/arm/boot/dts/imx6qdl-microsom-ar8035.dtsi +++ b/arch/arm/boot/dts/imx6qdl-microsom-ar8035.dtsi @@ -46,7 +46,7 @@ pinctrl-0 = <&pinctrl_microsom_enet_ar8035>; phy-mode = "rgmii"; phy-reset-duration = <2>; - phy-reset-gpios = <&gpio4 15 0>; + phy-reset-gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi index 70772ebadd4d..f22e5879340b 100644 --- a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi +++ b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi @@ -271,7 +271,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; phy-mode = "rgmii"; - phy-reset-gpios = <&gpio1 27 0>; + phy-reset-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>; txen-skew-ps = <0>; txc-skew-ps = <3000>; rxdv-skew-ps = <0>; diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi index 58055ceec6dc..db705f1cbe37 100644 --- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi @@ -178,7 +178,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; phy-mode = "rgmii"; - phy-reset-gpios = <&gpio1 25 0>; + phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl-tx6.dtsi b/arch/arm/boot/dts/imx6qdl-tx6.dtsi index a146fe7fdc5a..c6bec97fbeaf 100644 --- a/arch/arm/boot/dts/imx6qdl-tx6.dtsi +++ b/arch/arm/boot/dts/imx6qdl-tx6.dtsi @@ -248,7 +248,7 @@ <&clks IMX6QDL_CLK_ENET_REF>; clock-names = "ipg", "ahb", "ptp", "enet_out"; phy-mode = "rmii"; - phy-reset-gpios = <&gpio7 6 GPIO_ACTIVE_HIGH>; + phy-reset-gpios = <&gpio7 6 GPIO_ACTIVE_LOW>; phy-handle = <&etnphy>; phy-supply = <®_3v3_etn>; status = "okay"; diff --git a/arch/arm/boot/dts/imx6qdl-wandboard.dtsi b/arch/arm/boot/dts/imx6qdl-wandboard.dtsi index 850ceadbc2cf..b4fa7f1d63da 100644 --- a/arch/arm/boot/dts/imx6qdl-wandboard.dtsi +++ b/arch/arm/boot/dts/imx6qdl-wandboard.dtsi @@ -209,7 +209,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; phy-mode = "rgmii"; - phy-reset-gpios = <&gpio3 29 0>; + phy-reset-gpios = <&gpio3 29 GPIO_ACTIVE_LOW>; interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>, <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>; fsl,err006687-workaround-present; diff --git a/arch/arm/boot/dts/imx6ul-tx6ul-mainboard.dts b/arch/arm/boot/dts/imx6ul-tx6ul-mainboard.dts index 7c5dd1b316ca..28d055e3f301 100644 --- a/arch/arm/boot/dts/imx6ul-tx6ul-mainboard.dts +++ b/arch/arm/boot/dts/imx6ul-tx6ul-mainboard.dts @@ -78,7 +78,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet2 &pinctrl_enet2_mdio &pinctrl_etnphy1_rst>; phy-mode = "rmii"; - phy-reset-gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>; + phy-reset-gpios = <&gpio4 28 GPIO_ACTIVE_LOW>; phy-supply = <®_3v3_etn>; phy-handle = <&etnphy1>; status = "okay"; diff --git a/arch/arm/boot/dts/imx6ul-tx6ul.dtsi b/arch/arm/boot/dts/imx6ul-tx6ul.dtsi index 4ccc9e9d2c29..ec745eb3b6a8 100644 --- a/arch/arm/boot/dts/imx6ul-tx6ul.dtsi +++ b/arch/arm/boot/dts/imx6ul-tx6ul.dtsi @@ -307,7 +307,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet1 &pinctrl_enet1_mdio &pinctrl_etnphy0_rst>; phy-mode = "rmii"; - phy-reset-gpios = <&gpio5 6 GPIO_ACTIVE_HIGH>; + phy-reset-gpios = <&gpio5 6 GPIO_ACTIVE_LOW>; phy-supply = <®_3v3_etn>; phy-handle = <&etnphy0>; status = "okay"; @@ -342,7 +342,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet2 &pinctrl_etnphy1_rst>; phy-mode = "rmii"; - phy-reset-gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>; + phy-reset-gpios = <&gpio4 28 GPIO_ACTIVE_LOW>; phy-supply = <®_3v3_etn>; phy-handle = <&etnphy1>; status = "disabled"; -- cgit v1.2.3 From b877039aa1fe3a9ac784619a3415feed50e6fb91 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Mon, 5 Jun 2017 08:17:47 -0300 Subject: ARM: dts: imx7d-sdb: Adjust the regulator nodes It is not recommended to place the regulator nodes inside 'simple-bus', so adjust them accordingly. The motivation for rearranging this is to make it easier to add new regulator nodes in the future. Signed-off-by: Fabio Estevam Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx7d-sdb.dts | 66 +++++++++++++++++------------------------ 1 file changed, 28 insertions(+), 38 deletions(-) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/imx7d-sdb.dts b/arch/arm/boot/dts/imx7d-sdb.dts index 4a4b522d17d2..291f556029f6 100644 --- a/arch/arm/boot/dts/imx7d-sdb.dts +++ b/arch/arm/boot/dts/imx7d-sdb.dts @@ -73,47 +73,37 @@ }; }; - regulators { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - reg_usb_otg1_vbus: regulator@0 { - compatible = "regulator-fixed"; - reg = <0>; - regulator-name = "usb_otg1_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; + reg_usb_otg1_vbus: regulator-usb-otg1-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb_otg1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; - reg_usb_otg2_vbus: regulator@1 { - compatible = "regulator-fixed"; - reg = <1>; - regulator-name = "usb_otg2_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio4 7 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; + reg_usb_otg2_vbus: regulator-usb-otg1-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb_otg2_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio4 7 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; - reg_can2_3v3: regulator@2 { - compatible = "regulator-fixed"; - reg = <2>; - regulator-name = "can2-3v3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - gpio = <&gpio1 7 GPIO_ACTIVE_LOW>; - }; + reg_can2_3v3: regulator-can2-3v3 { + compatible = "regulator-fixed"; + regulator-name = "can2-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio1 7 GPIO_ACTIVE_LOW>; + }; - reg_vref_1v8: regulator@3 { - compatible = "regulator-fixed"; - reg = <3>; - regulator-name = "vref-1v8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; + reg_vref_1v8: regulator-vref-1v8 { + compatible = "regulator-fixed"; + regulator-name = "vref-1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; }; }; -- cgit v1.2.3 From 6e823e9720b7e2aa36138bc776001069df851e13 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Mon, 5 Jun 2017 08:17:48 -0300 Subject: ARM: dts: imx7d-sdb: Add Wifi support imx7d-sdb has a BCM4339 Wifi chip connected to USDHC2. Add support for it. While at it, move the WL_REG_ON pin to the correct pinctrl node. Signed-off-by: Fabio Estevam Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx7d-sdb.dts | 32 +++++++++++++++++++++++++++++++- 1 file changed, 31 insertions(+), 1 deletion(-) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/imx7d-sdb.dts b/arch/arm/boot/dts/imx7d-sdb.dts index 291f556029f6..52e40c1d8d40 100644 --- a/arch/arm/boot/dts/imx7d-sdb.dts +++ b/arch/arm/boot/dts/imx7d-sdb.dts @@ -105,6 +105,18 @@ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; + + reg_brcm: regulator-brcm { + compatible = "regulator-fixed"; + gpio = <&gpio4 21 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-name = "brcm_reg"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_brcm_reg>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + startup-delay-us = <200000>; + }; }; &adc1 { @@ -379,6 +391,19 @@ status = "okay"; }; +&usdhc2 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc2>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>; + wakeup-source; + keep-power-in-suspend; + non-removable; + vmmc-supply = <®_brcm>; + fsl,tuning-step = <2>; + status = "okay"; +}; + &usdhc3 { pinctrl-names = "default", "state_100mhz", "state_200mhz"; pinctrl-0 = <&pinctrl_usdhc3>; @@ -403,6 +428,12 @@ pinctrl-0 = <&pinctrl_hog>; imx7d-sdb { + pinctrl_brcm_reg: brcmreggrp { + fsl,pins = < + MX7D_PAD_ECSPI2_MOSI__GPIO4_IO21 0x14 + >; + }; + pinctrl_ecspi3: ecspi3grp { fsl,pins = < MX7D_PAD_SAI2_TX_SYNC__ECSPI3_MISO 0x2 @@ -570,7 +601,6 @@ MX7D_PAD_SD2_DATA1__SD2_DATA1 0x59 MX7D_PAD_SD2_DATA2__SD2_DATA2 0x59 MX7D_PAD_SD2_DATA3__SD2_DATA3 0x59 - MX7D_PAD_ECSPI2_MOSI__GPIO4_IO21 0x59 /* WL_REG_ON */ >; }; -- cgit v1.2.3 From 3229f83bd8baf7bdbe8056e468743fdcba492e28 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Mon, 5 Jun 2017 08:17:49 -0300 Subject: ARM: dts: imx7d-sdb: Add Bluetooth support imx7d-sdb has a BCM4339 BT chip connected to UART6. Add support for it. Signed-off-by: Fabio Estevam Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx7d-sdb.dts | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/imx7d-sdb.dts b/arch/arm/boot/dts/imx7d-sdb.dts index 52e40c1d8d40..54c45402286b 100644 --- a/arch/arm/boot/dts/imx7d-sdb.dts +++ b/arch/arm/boot/dts/imx7d-sdb.dts @@ -370,6 +370,15 @@ status = "okay"; }; +&uart6 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart6>; + assigned-clocks = <&clks IMX7D_UART6_ROOT_SRC>; + assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>; + uart-has-rtscts; + status = "okay"; +}; + &usbotg1 { vbus-supply = <®_usb_otg1_vbus>; status = "okay"; -- cgit v1.2.3 From f21683ae6ef99d79b3113367cfc6cd51852e8202 Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Thu, 20 Apr 2017 16:25:10 +0530 Subject: ARM: dts: uniphier: Use - instead of @ for DT OPP entries Compiling the DT file with W=1, DTC warns like follows: Warning (unit_address_vs_reg): Node /opp_table0/opp@1000000000 has a unit name, but no reg property Fix this by replacing '@' with '-' as the OPP nodes will never have a "reg" property. Reported-by: Krzysztof Kozlowski Reported-by: Masahiro Yamada Suggested-by: Mark Rutland Signed-off-by: Viresh Kumar Acked-by: Rob Herring Signed-off-by: Masahiro Yamada --- arch/arm/boot/dts/uniphier-pro5.dtsi | 32 ++++++++++++++++---------------- arch/arm/boot/dts/uniphier-pxs2.dtsi | 16 ++++++++-------- 2 files changed, 24 insertions(+), 24 deletions(-) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/uniphier-pro5.dtsi b/arch/arm/boot/dts/uniphier-pro5.dtsi index df07b555cbed..81605e3a5e0a 100644 --- a/arch/arm/boot/dts/uniphier-pro5.dtsi +++ b/arch/arm/boot/dts/uniphier-pro5.dtsi @@ -77,67 +77,67 @@ compatible = "operating-points-v2"; opp-shared; - opp@100000000 { + opp-100000000 { opp-hz = /bits/ 64 <100000000>; clock-latency-ns = <300>; }; - opp@116667000 { + opp-116667000 { opp-hz = /bits/ 64 <116667000>; clock-latency-ns = <300>; }; - opp@150000000 { + opp-150000000 { opp-hz = /bits/ 64 <150000000>; clock-latency-ns = <300>; }; - opp@175000000 { + opp-175000000 { opp-hz = /bits/ 64 <175000000>; clock-latency-ns = <300>; }; - opp@200000000 { + opp-200000000 { opp-hz = /bits/ 64 <200000000>; clock-latency-ns = <300>; }; - opp@233334000 { + opp-233334000 { opp-hz = /bits/ 64 <233334000>; clock-latency-ns = <300>; }; - opp@300000000 { + opp-300000000 { opp-hz = /bits/ 64 <300000000>; clock-latency-ns = <300>; }; - opp@350000000 { + opp-350000000 { opp-hz = /bits/ 64 <350000000>; clock-latency-ns = <300>; }; - opp@400000000 { + opp-400000000 { opp-hz = /bits/ 64 <400000000>; clock-latency-ns = <300>; }; - opp@466667000 { + opp-466667000 { opp-hz = /bits/ 64 <466667000>; clock-latency-ns = <300>; }; - opp@600000000 { + opp-600000000 { opp-hz = /bits/ 64 <600000000>; clock-latency-ns = <300>; }; - opp@700000000 { + opp-700000000 { opp-hz = /bits/ 64 <700000000>; clock-latency-ns = <300>; }; - opp@800000000 { + opp-800000000 { opp-hz = /bits/ 64 <800000000>; clock-latency-ns = <300>; }; - opp@933334000 { + opp-933334000 { opp-hz = /bits/ 64 <933334000>; clock-latency-ns = <300>; }; - opp@1200000000 { + opp-1200000000 { opp-hz = /bits/ 64 <1200000000>; clock-latency-ns = <300>; }; - opp@1400000000 { + opp-1400000000 { opp-hz = /bits/ 64 <1400000000>; clock-latency-ns = <300>; }; diff --git a/arch/arm/boot/dts/uniphier-pxs2.dtsi b/arch/arm/boot/dts/uniphier-pxs2.dtsi index 58c3e2f35706..bc5a1afedee8 100644 --- a/arch/arm/boot/dts/uniphier-pxs2.dtsi +++ b/arch/arm/boot/dts/uniphier-pxs2.dtsi @@ -97,35 +97,35 @@ compatible = "operating-points-v2"; opp-shared; - opp@100000000 { + opp-100000000 { opp-hz = /bits/ 64 <100000000>; clock-latency-ns = <300>; }; - opp@150000000 { + opp-150000000 { opp-hz = /bits/ 64 <150000000>; clock-latency-ns = <300>; }; - opp@200000000 { + opp-200000000 { opp-hz = /bits/ 64 <200000000>; clock-latency-ns = <300>; }; - opp@300000000 { + opp-300000000 { opp-hz = /bits/ 64 <300000000>; clock-latency-ns = <300>; }; - opp@400000000 { + opp-400000000 { opp-hz = /bits/ 64 <400000000>; clock-latency-ns = <300>; }; - opp@600000000 { + opp-600000000 { opp-hz = /bits/ 64 <600000000>; clock-latency-ns = <300>; }; - opp@800000000 { + opp-800000000 { opp-hz = /bits/ 64 <800000000>; clock-latency-ns = <300>; }; - opp@1200000000 { + opp-1200000000 { opp-hz = /bits/ 64 <1200000000>; clock-latency-ns = <300>; }; -- cgit v1.2.3 From 18088678597a27901bc03eb6b67284c68f838417 Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Sun, 14 May 2017 02:20:49 +0900 Subject: ARM: dts: uniphier: fix simple-bus unit address format error Compiling the UniPhier DT files with W=1, DTC warns like follows: Warning (simple_bus_reg): Node /soc/system-bus@58c00000/support_card@1,1f00000/ethernet@00000000 simple-bus unit address format error, expected "0" Warning (simple_bus_reg): Node /soc/system-bus@58c00000/support_card@1,1f00000/uart@000b0000 simple-bus unit address format error, expected "b0000" Warning (simple_bus_reg): Node /soc/smpctrl@59800000 simple-bus unit address format error, expected "59801000" Signed-off-by: Masahiro Yamada --- arch/arm/boot/dts/uniphier-ld4.dtsi | 2 +- arch/arm/boot/dts/uniphier-pro4.dtsi | 2 +- arch/arm/boot/dts/uniphier-pro5.dtsi | 2 +- arch/arm/boot/dts/uniphier-pxs2.dtsi | 2 +- arch/arm/boot/dts/uniphier-sld3.dtsi | 2 +- arch/arm/boot/dts/uniphier-sld8.dtsi | 2 +- arch/arm/boot/dts/uniphier-support-card.dtsi | 4 ++-- 7 files changed, 8 insertions(+), 8 deletions(-) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/uniphier-ld4.dtsi b/arch/arm/boot/dts/uniphier-ld4.dtsi index 4f5fe15eaee2..e608895eec2c 100644 --- a/arch/arm/boot/dts/uniphier-ld4.dtsi +++ b/arch/arm/boot/dts/uniphier-ld4.dtsi @@ -201,7 +201,7 @@ pinctrl-0 = <&pinctrl_system_bus>; }; - smpctrl@59800000 { + smpctrl@59801000 { compatible = "socionext,uniphier-smpctrl"; reg = <0x59801000 0x400>; }; diff --git a/arch/arm/boot/dts/uniphier-pro4.dtsi b/arch/arm/boot/dts/uniphier-pro4.dtsi index 794a85a7068b..f55708efaf1a 100644 --- a/arch/arm/boot/dts/uniphier-pro4.dtsi +++ b/arch/arm/boot/dts/uniphier-pro4.dtsi @@ -233,7 +233,7 @@ pinctrl-0 = <&pinctrl_system_bus>; }; - smpctrl@59800000 { + smpctrl@59801000 { compatible = "socionext,uniphier-smpctrl"; reg = <0x59801000 0x400>; }; diff --git a/arch/arm/boot/dts/uniphier-pro5.dtsi b/arch/arm/boot/dts/uniphier-pro5.dtsi index 81605e3a5e0a..9577769a0add 100644 --- a/arch/arm/boot/dts/uniphier-pro5.dtsi +++ b/arch/arm/boot/dts/uniphier-pro5.dtsi @@ -320,7 +320,7 @@ pinctrl-0 = <&pinctrl_system_bus>; }; - smpctrl@59800000 { + smpctrl@59801000 { compatible = "socionext,uniphier-smpctrl"; reg = <0x59801000 0x400>; }; diff --git a/arch/arm/boot/dts/uniphier-pxs2.dtsi b/arch/arm/boot/dts/uniphier-pxs2.dtsi index bc5a1afedee8..bf3bafced451 100644 --- a/arch/arm/boot/dts/uniphier-pxs2.dtsi +++ b/arch/arm/boot/dts/uniphier-pxs2.dtsi @@ -304,7 +304,7 @@ pinctrl-0 = <&pinctrl_system_bus>; }; - smpctrl@59800000 { + smpctrl@59801000 { compatible = "socionext,uniphier-smpctrl"; reg = <0x59801000 0x400>; }; diff --git a/arch/arm/boot/dts/uniphier-sld3.dtsi b/arch/arm/boot/dts/uniphier-sld3.dtsi index 01d77edac01f..7c9f41d04e39 100644 --- a/arch/arm/boot/dts/uniphier-sld3.dtsi +++ b/arch/arm/boot/dts/uniphier-sld3.dtsi @@ -216,7 +216,7 @@ #size-cells = <1>; }; - smpctrl@59800000 { + smpctrl@59801000 { compatible = "socionext,uniphier-smpctrl"; reg = <0x59801000 0x400>; }; diff --git a/arch/arm/boot/dts/uniphier-sld8.dtsi b/arch/arm/boot/dts/uniphier-sld8.dtsi index eb06fdc04b02..19aa13998489 100644 --- a/arch/arm/boot/dts/uniphier-sld8.dtsi +++ b/arch/arm/boot/dts/uniphier-sld8.dtsi @@ -201,7 +201,7 @@ pinctrl-0 = <&pinctrl_system_bus>; }; - smpctrl@59800000 { + smpctrl@59801000 { compatible = "socionext,uniphier-smpctrl"; reg = <0x59801000 0x400>; }; diff --git a/arch/arm/boot/dts/uniphier-support-card.dtsi b/arch/arm/boot/dts/uniphier-support-card.dtsi index f61dfec2807f..fdbf0f6e99ae 100644 --- a/arch/arm/boot/dts/uniphier-support-card.dtsi +++ b/arch/arm/boot/dts/uniphier-support-card.dtsi @@ -53,14 +53,14 @@ #size-cells = <1>; ranges = <0x00000000 1 0x01f00000 0x00100000>; - ethsc: ethernet@00000000 { + ethsc: ethernet@0 { compatible = "smsc,lan9118", "smsc,lan9115"; reg = <0x00000000 0x1000>; phy-mode = "mii"; reg-io-width = <4>; }; - serialsc: uart@000b0000 { + serialsc: uart@b0000 { compatible = "ns16550a"; reg = <0x000b0000 0x20>; clock-frequency = <12288000>; -- cgit v1.2.3 From fa53757bca338028338e4e9b8b59ac4ebbdeb80a Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Mon, 5 Jun 2017 12:57:58 +0900 Subject: ARM: dts: uniphier: use SPDX-License-Identifier Follow the recent trend for the license description, and fix the wrongly stated X11 to MIT. The X11 license text [1] is explicitly for the X Consortium and has a couple of extra clauses. The MIT license text [2] is actually what the current DT files claim. [1] https://spdx.org/licenses/X11.html [2] https://spdx.org/licenses/MIT.html Signed-off-by: Masahiro Yamada --- arch/arm/boot/dts/uniphier-ld4-ref.dts | 38 +--------------------------- arch/arm/boot/dts/uniphier-ld4.dtsi | 38 +--------------------------- arch/arm/boot/dts/uniphier-ld6b-ref.dts | 38 +--------------------------- arch/arm/boot/dts/uniphier-ld6b.dtsi | 38 +--------------------------- arch/arm/boot/dts/uniphier-pro4-ace.dts | 38 +--------------------------- arch/arm/boot/dts/uniphier-pro4-ref.dts | 38 +--------------------------- arch/arm/boot/dts/uniphier-pro4-sanji.dts | 38 +--------------------------- arch/arm/boot/dts/uniphier-pro4.dtsi | 38 +--------------------------- arch/arm/boot/dts/uniphier-pxs2-gentil.dts | 38 +--------------------------- arch/arm/boot/dts/uniphier-pxs2-vodka.dts | 38 +--------------------------- arch/arm/boot/dts/uniphier-pxs2.dtsi | 38 +--------------------------- arch/arm/boot/dts/uniphier-ref-daughter.dtsi | 38 +--------------------------- arch/arm/boot/dts/uniphier-sld3-ref.dts | 38 +--------------------------- arch/arm/boot/dts/uniphier-sld3.dtsi | 38 +--------------------------- arch/arm/boot/dts/uniphier-sld8-ref.dts | 38 +--------------------------- arch/arm/boot/dts/uniphier-sld8.dtsi | 38 +--------------------------- arch/arm/boot/dts/uniphier-support-card.dtsi | 38 +--------------------------- 17 files changed, 17 insertions(+), 629 deletions(-) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/uniphier-ld4-ref.dts b/arch/arm/boot/dts/uniphier-ld4-ref.dts index e0da4ee21c21..4817ebb28eb2 100644 --- a/arch/arm/boot/dts/uniphier-ld4-ref.dts +++ b/arch/arm/boot/dts/uniphier-ld4-ref.dts @@ -4,43 +4,7 @@ * Copyright (C) 2015-2016 Socionext Inc. * Author: Masahiro Yamada * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. + * SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ /dts-v1/; diff --git a/arch/arm/boot/dts/uniphier-ld4.dtsi b/arch/arm/boot/dts/uniphier-ld4.dtsi index e608895eec2c..fb2fd9605b9d 100644 --- a/arch/arm/boot/dts/uniphier-ld4.dtsi +++ b/arch/arm/boot/dts/uniphier-ld4.dtsi @@ -4,43 +4,7 @@ * Copyright (C) 2015-2016 Socionext Inc. * Author: Masahiro Yamada * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. + * SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ / { diff --git a/arch/arm/boot/dts/uniphier-ld6b-ref.dts b/arch/arm/boot/dts/uniphier-ld6b-ref.dts index a397a8811c78..96db4abc02c3 100644 --- a/arch/arm/boot/dts/uniphier-ld6b-ref.dts +++ b/arch/arm/boot/dts/uniphier-ld6b-ref.dts @@ -4,43 +4,7 @@ * Copyright (C) 2015-2016 Socionext Inc. * Author: Masahiro Yamada * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. + * SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ /dts-v1/; diff --git a/arch/arm/boot/dts/uniphier-ld6b.dtsi b/arch/arm/boot/dts/uniphier-ld6b.dtsi index 905c77d499eb..8b9a79731bd3 100644 --- a/arch/arm/boot/dts/uniphier-ld6b.dtsi +++ b/arch/arm/boot/dts/uniphier-ld6b.dtsi @@ -4,43 +4,7 @@ * Copyright (C) 2015-2016 Socionext Inc. * Author: Masahiro Yamada * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. + * SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ /* diff --git a/arch/arm/boot/dts/uniphier-pro4-ace.dts b/arch/arm/boot/dts/uniphier-pro4-ace.dts index fefc89149234..e45bf4f418b9 100644 --- a/arch/arm/boot/dts/uniphier-pro4-ace.dts +++ b/arch/arm/boot/dts/uniphier-pro4-ace.dts @@ -4,43 +4,7 @@ * Copyright (C) 2016 Socionext Inc. * Author: Masahiro Yamada * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. + * SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ /dts-v1/; diff --git a/arch/arm/boot/dts/uniphier-pro4-ref.dts b/arch/arm/boot/dts/uniphier-pro4-ref.dts index 6077e634d14a..4cf539245f2e 100644 --- a/arch/arm/boot/dts/uniphier-pro4-ref.dts +++ b/arch/arm/boot/dts/uniphier-pro4-ref.dts @@ -4,43 +4,7 @@ * Copyright (C) 2015-2016 Socionext Inc. * Author: Masahiro Yamada * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. + * SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ /dts-v1/; diff --git a/arch/arm/boot/dts/uniphier-pro4-sanji.dts b/arch/arm/boot/dts/uniphier-pro4-sanji.dts index 6c63c8bad825..18836886bc31 100644 --- a/arch/arm/boot/dts/uniphier-pro4-sanji.dts +++ b/arch/arm/boot/dts/uniphier-pro4-sanji.dts @@ -4,43 +4,7 @@ * Copyright (C) 2016 Socionext Inc. * Author: Masahiro Yamada * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. + * SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ /dts-v1/; diff --git a/arch/arm/boot/dts/uniphier-pro4.dtsi b/arch/arm/boot/dts/uniphier-pro4.dtsi index f55708efaf1a..37400becf4ba 100644 --- a/arch/arm/boot/dts/uniphier-pro4.dtsi +++ b/arch/arm/boot/dts/uniphier-pro4.dtsi @@ -4,43 +4,7 @@ * Copyright (C) 2015-2016 Socionext Inc. * Author: Masahiro Yamada * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. + * SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ / { diff --git a/arch/arm/boot/dts/uniphier-pxs2-gentil.dts b/arch/arm/boot/dts/uniphier-pxs2-gentil.dts index cccc86658d20..bb39bd171d1a 100644 --- a/arch/arm/boot/dts/uniphier-pxs2-gentil.dts +++ b/arch/arm/boot/dts/uniphier-pxs2-gentil.dts @@ -4,43 +4,7 @@ * Copyright (C) 2015-2016 Socionext Inc. * Author: Masahiro Yamada * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. + * SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ /dts-v1/; diff --git a/arch/arm/boot/dts/uniphier-pxs2-vodka.dts b/arch/arm/boot/dts/uniphier-pxs2-vodka.dts index 803a39aa39d0..dc2d0579c666 100644 --- a/arch/arm/boot/dts/uniphier-pxs2-vodka.dts +++ b/arch/arm/boot/dts/uniphier-pxs2-vodka.dts @@ -4,43 +4,7 @@ * Copyright (C) 2015-2016 Socionext Inc. * Author: Masahiro Yamada * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. + * SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ /dts-v1/; diff --git a/arch/arm/boot/dts/uniphier-pxs2.dtsi b/arch/arm/boot/dts/uniphier-pxs2.dtsi index bf3bafced451..bace751d4023 100644 --- a/arch/arm/boot/dts/uniphier-pxs2.dtsi +++ b/arch/arm/boot/dts/uniphier-pxs2.dtsi @@ -4,43 +4,7 @@ * Copyright (C) 2015-2016 Socionext Inc. * Author: Masahiro Yamada * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. + * SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ / { diff --git a/arch/arm/boot/dts/uniphier-ref-daughter.dtsi b/arch/arm/boot/dts/uniphier-ref-daughter.dtsi index c62ae1a81f47..7a1c29b558d5 100644 --- a/arch/arm/boot/dts/uniphier-ref-daughter.dtsi +++ b/arch/arm/boot/dts/uniphier-ref-daughter.dtsi @@ -4,43 +4,7 @@ * Copyright (C) 2015-2017 Socionext Inc. * Author: Masahiro Yamada * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. + * SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ &i2c0 { diff --git a/arch/arm/boot/dts/uniphier-sld3-ref.dts b/arch/arm/boot/dts/uniphier-sld3-ref.dts index eb63dcca92b5..70cda39a3dd2 100644 --- a/arch/arm/boot/dts/uniphier-sld3-ref.dts +++ b/arch/arm/boot/dts/uniphier-sld3-ref.dts @@ -4,43 +4,7 @@ * Copyright (C) 2015-2016 Socionext Inc. * Author: Masahiro Yamada * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. + * SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ /dts-v1/; diff --git a/arch/arm/boot/dts/uniphier-sld3.dtsi b/arch/arm/boot/dts/uniphier-sld3.dtsi index 7c9f41d04e39..408287936613 100644 --- a/arch/arm/boot/dts/uniphier-sld3.dtsi +++ b/arch/arm/boot/dts/uniphier-sld3.dtsi @@ -4,43 +4,7 @@ * Copyright (C) 2015-2016 Socionext Inc. * Author: Masahiro Yamada * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. + * SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ / { diff --git a/arch/arm/boot/dts/uniphier-sld8-ref.dts b/arch/arm/boot/dts/uniphier-sld8-ref.dts index 737d276349fd..4536d5b71297 100644 --- a/arch/arm/boot/dts/uniphier-sld8-ref.dts +++ b/arch/arm/boot/dts/uniphier-sld8-ref.dts @@ -4,43 +4,7 @@ * Copyright (C) 2015-2016 Socionext Inc. * Author: Masahiro Yamada * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. + * SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ /dts-v1/; diff --git a/arch/arm/boot/dts/uniphier-sld8.dtsi b/arch/arm/boot/dts/uniphier-sld8.dtsi index 19aa13998489..9fb9167f2db4 100644 --- a/arch/arm/boot/dts/uniphier-sld8.dtsi +++ b/arch/arm/boot/dts/uniphier-sld8.dtsi @@ -4,43 +4,7 @@ * Copyright (C) 2015-2016 Socionext Inc. * Author: Masahiro Yamada * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. + * SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ / { diff --git a/arch/arm/boot/dts/uniphier-support-card.dtsi b/arch/arm/boot/dts/uniphier-support-card.dtsi index fdbf0f6e99ae..6c825f192e65 100644 --- a/arch/arm/boot/dts/uniphier-support-card.dtsi +++ b/arch/arm/boot/dts/uniphier-support-card.dtsi @@ -4,43 +4,7 @@ * Copyright (C) 2015-2017 Socionext Inc. * Author: Masahiro Yamada * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. + * SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ &system_bus { -- cgit v1.2.3 From 5533b0cda3bf8b17e3688cce4b66bd5448d6cd1e Mon Sep 17 00:00:00 2001 From: Sven Eckelmann Date: Fri, 28 Apr 2017 12:10:36 +0200 Subject: ARM: dts: qcom: add gsbi7 serial to ipq8064 SoC device tree The gsbi_serial7 under gsbi7 is used by the IPQ8068 based board EWS870AP as main serial console. Signed-off-by: Sven Eckelmann Signed-off-by: Andy Gross --- arch/arm/boot/dts/qcom-ipq8064.dtsi | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom-ipq8064.dtsi index 76f4e8921d58..f1fbffe59b93 100644 --- a/arch/arm/boot/dts/qcom-ipq8064.dtsi +++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi @@ -284,6 +284,29 @@ }; }; + gsbi7: gsbi@16600000 { + status = "disabled"; + compatible = "qcom,gsbi-v1.0.0"; + cell-index = <7>; + reg = <0x16600000 0x100>; + clocks = <&gcc GSBI7_H_CLK>; + clock-names = "iface"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + syscon-tcsr = <&tcsr>; + + gsbi7_serial: serial@16640000 { + compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; + reg = <0x16640000 0x1000>, + <0x16600000 0x1000>; + interrupts = <0 158 0x0>; + clocks = <&gcc GSBI7_UART_CLK>, <&gcc GSBI7_H_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + }; + sata_phy: sata-phy@1b400000 { compatible = "qcom,ipq806x-sata-phy"; reg = <0x1b400000 0x200>; -- cgit v1.2.3 From 650df439cfb96c303328935559b2d06127a5a0b0 Mon Sep 17 00:00:00 2001 From: Christian Lamparter Date: Tue, 2 May 2017 21:19:24 +0200 Subject: ARM: dts: qcom: ipq4019: fix i2c_0 node This patch fixes two typos in the i2c_0 node for the ipq4019. The reg property length is just 0x600. The core clock is GCC_BLSP1_QUP1_I2C_APPS_CLK. GCC_BLSP1_QUP2_I2C_APPS_CLK is used by the second i2c. Fixes: e76b4284b520ba3 ("qcom: ipq4019: add i2c node to ipq4019 SoC and DK01 device tree") Signed-off-by: Christian Lamparter Signed-off-by: Andy Gross --- arch/arm/boot/dts/qcom-ipq4019.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/qcom-ipq4019.dtsi b/arch/arm/boot/dts/qcom-ipq4019.dtsi index b7a24af8f47b..4b7d97275c62 100644 --- a/arch/arm/boot/dts/qcom-ipq4019.dtsi +++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi @@ -154,10 +154,10 @@ i2c_0: i2c@78b7000 { compatible = "qcom,i2c-qup-v2.2.1"; - reg = <0x78b7000 0x6000>; + reg = <0x78b7000 0x600>; interrupts = ; clocks = <&gcc GCC_BLSP1_AHB_CLK>, - <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>; + <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>; clock-names = "iface", "core"; #address-cells = <1>; #size-cells = <0>; -- cgit v1.2.3 From 6d78cea61c31bca8a8c84a3e1121453a2f147da2 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Sat, 13 May 2017 16:15:43 +0200 Subject: ARM: dts: add XOADC and IIO HWMON to MSM8660/APQ8060 This adds the PM8058 XOADC node to the PM8058 PMIC node, defines the 16 channels and further also define an IIO HWMON node for the channels that are used for housekeeping of voltages and die temperature for the PMIC chip die. Tested on the APQ8060 DragonBoard: cd /sys/class/hwmon/hwmon0 cat in2_input 4773 (DC mains ~5V) cat in4_input 625 (0.625V reference voltage) cat in5_input 1250 (1.25V reference voltage) cat temp1_input 35852 (die temperature) Signed-off-by: Linus Walleij Acked-by: Bjorn Andersson Signed-off-by: Andy Gross --- arch/arm/boot/dts/qcom-msm8660.dtsi | 59 +++++++++++++++++++++++++++++++++++++ 1 file changed, 59 insertions(+) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/qcom-msm8660.dtsi b/arch/arm/boot/dts/qcom-msm8660.dtsi index 747669a62aa8..f5631e810e9d 100644 --- a/arch/arm/boot/dts/qcom-msm8660.dtsi +++ b/arch/arm/boot/dts/qcom-msm8660.dtsi @@ -63,6 +63,22 @@ }; }; + /* + * These channels from the ADC are simply hardware monitors. + * That is why the ADC is referred to as "HKADC" - HouseKeeping + * ADC. + */ + iio-hwmon { + compatible = "iio-hwmon"; + io-channels = <&xoadc 0x00 0x01>, /* Battery */ + <&xoadc 0x00 0x02>, /* DC in (charger) */ + <&xoadc 0x00 0x04>, /* VPH the main system voltage */ + <&xoadc 0x00 0x0b>, /* Die temperature */ + <&xoadc 0x00 0x0c>, /* Reference voltage 1.25V */ + <&xoadc 0x00 0x0d>, /* Reference voltage 0.625V */ + <&xoadc 0x00 0x0e>; /* Reference voltage 0.325V */ + }; + soc: soc { #address-cells = <1>; #size-cells = <1>; @@ -267,6 +283,49 @@ row-hold = <91500>; }; + xoadc: xoadc@197 { + compatible = "qcom,pm8058-adc"; + reg = <0x197>; + interrupts-extended = <&pm8058 76 IRQ_TYPE_EDGE_RISING>; + #address-cells = <2>; + #size-cells = <0>; + #io-channel-cells = <2>; + + vcoin: adc-channel@00 { + reg = <0x00 0x00>; + }; + vbat: adc-channel@01 { + reg = <0x00 0x01>; + }; + dcin: adc-channel@02 { + reg = <0x00 0x02>; + }; + ichg: adc-channel@03 { + reg = <0x00 0x03>; + }; + vph_pwr: adc-channel@04 { + reg = <0x00 0x04>; + }; + usb_vbus: adc-channel@0a { + reg = <0x00 0x0a>; + }; + die_temp: adc-channel@0b { + reg = <0x00 0x0b>; + }; + ref_625mv: adc-channel@0c { + reg = <0x00 0x0c>; + }; + ref_1250mv: adc-channel@0d { + reg = <0x00 0x0d>; + }; + ref_325mv: adc-channel@0e { + reg = <0x00 0x0e>; + }; + ref_muxoff: adc-channel@0f { + reg = <0x00 0x0f>; + }; + }; + rtc@1e8 { compatible = "qcom,pm8058-rtc"; reg = <0x1e8>; -- cgit v1.2.3 From 567cf21350e443802c382104c3ebd5cd7a2b70c2 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Sat, 13 May 2017 16:15:53 +0200 Subject: ARM: dts: Qualcomm APQ8060 DragonBoard ALS sensor This adds the Capella CM3605 ambient light and proximity sensor to the APQ8060 DragonBoard device tree. Notice that we also set up pin config for the AOUT line and GPIO lines, and that we set the default trigger on the infrared LED to associate with the "cm3605" trigger so the IR LED is controlled by this the CM3605 driver. Signed-off-by: Linus Walleij Acked-by: Bjorn Andersson Signed-off-by: Andy Gross --- arch/arm/boot/dts/qcom-apq8060-dragonboard.dts | 80 ++++++++++++++++++++++++++ 1 file changed, 80 insertions(+) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts b/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts index 2da1413f5720..5225e489ef52 100644 --- a/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts +++ b/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts @@ -23,6 +23,7 @@ #include #include #include +#include #include "qcom-msm8660.dtsi" / { @@ -83,6 +84,25 @@ }; }; + /* + * Capella CM3605 light and proximity sensor mounted directly + * on the sensor board. + */ + cm3605 { + compatible = "capella,cm3605"; + vdd-supply = <&pm8058_l14>; // 2.85V + aset-gpios = <&pm8058_gpio 35 GPIO_ACTIVE_LOW>; + capella,aset-resistance-ohms = <100000>; + /* GPIO34 has interrupt 225 on the PM8058 */ + /* Trig on both edges - getting close or far away */ + interrupts-extended = <&pm8058 225 IRQ_TYPE_EDGE_BOTH>; + /* MPP05 analog input to the XOADC */ + io-channels = <&xoadc 0x00 0x05>; + io-channel-names = "aout"; + pinctrl-names = "default"; + pinctrl-0 = <&dragon_cm3605_gpios>, <&dragon_cm3605_mpps>; + }; + soc { pinctrl@800000 { /* eMMMC pins, all 8 data lines connected */ @@ -317,6 +337,24 @@ power-source = ; }; }; + dragon_cm3605_gpios: cm3605-gpios { + /* Pin 34 connected to the proxy IRQ */ + pinconf_gpio34 { + pins = "gpio34"; + function = "normal"; + input-enable; + bias-disable; + power-source = ; + }; + /* Pin 35 connected to ASET */ + pinconf_gpio35 { + pins = "gpio35"; + function = "normal"; + output-high; + bias-disable; + power-source = ; + }; + }; dragon_veth_gpios: veth-gpios { pinconf { pins = "gpio40"; @@ -327,6 +365,47 @@ }; }; + mpps@50 { + dragon_cm3605_mpps: cm3605-mpps { + pinconf { + pins = "mpp5"; + function = "analog"; + input-enable; + bias-high-impedance; + /* Let's use channel 5 */ + qcom,amux-route = ; + power-source = ; + }; + }; + }; + + xoadc@197 { + /* Reference voltage 2.2 V */ + xoadc-ref-supply = <&pm8058_l18>; + + /* Board-specific channels */ + mpp5@05 { + /* Connected to AOUT of ALS sensor */ + reg = <0x00 0x05>; + }; + mpp6@06 { + /* Connected to test point TP43 */ + reg = <0x00 0x06>; + }; + mpp7@07 { + /* Connected to battery thermistor */ + reg = <0x00 0x07>; + }; + mpp8@08 { + /* Connected to battery ID detector */ + reg = <0x00 0x08>; + }; + mpp9@09 { + /* Connected to XO thermistor */ + reg = <0x00 0x09>; + }; + }; + led@48 { /* * The keypad LED @0x48 is routed to @@ -340,6 +419,7 @@ reg = <0x48>; label = "pm8058:infrared:proximitysensor"; default-state = "off"; + linux,default-trigger = "cm3605"; }; led@131 { compatible = "qcom,pm8058-led"; -- cgit v1.2.3 From 5594207294fcbfe8e9fe86c81d1d8b88cb530e66 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Mon, 15 May 2017 09:50:12 +0200 Subject: ARM: dts: add GSBI8 defines to the MSM8660 family This defines the memory location and interrupt used by the GSBI8 I2C adapter on the MSM8660 SoCs. We add it as "disabled" by default so that boards using this I2C can enable it. Signed-off-by: Linus Walleij Acked-by: Bjorn Andersson Signed-off-by: Andy Gross --- arch/arm/boot/dts/qcom-msm8660.dtsi | 25 +++++++++++++++++++++++++ 1 file changed, 25 insertions(+) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/qcom-msm8660.dtsi b/arch/arm/boot/dts/qcom-msm8660.dtsi index f5631e810e9d..1b5d31b33b5e 100644 --- a/arch/arm/boot/dts/qcom-msm8660.dtsi +++ b/arch/arm/boot/dts/qcom-msm8660.dtsi @@ -123,6 +123,31 @@ reg = <0x900000 0x4000>; }; + + gsbi8: gsbi@19800000 { + compatible = "qcom,gsbi-v1.0.0"; + cell-index = <12>; + reg = <0x19800000 0x100>; + clocks = <&gcc GSBI8_H_CLK>; + clock-names = "iface"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + syscon-tcsr = <&tcsr>; + + gsbi8_i2c: i2c@19880000 { + compatible = "qcom,i2c-qup-v1.1.1"; + reg = <0x19880000 0x1000>; + interrupts = ; + clocks = <&gcc GSBI8_QUP_CLK>, <&gcc GSBI8_H_CLK>; + clock-names = "core", "iface"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + }; + gsbi12: gsbi@19c00000 { compatible = "qcom,gsbi-v1.0.0"; cell-index = <12>; -- cgit v1.2.3 From 2277795eb8e384dbfcee43b0e74dd3bc1129b4f8 Mon Sep 17 00:00:00 2001 From: Marek Belisko Date: Sun, 21 May 2017 12:38:17 +0200 Subject: ARM: dts: twl4030: Add missing madc reference for bci subnode The twl4030_charger driver expects an iio channel to detect the presence of an AC charger by looking at VAC (madc channel 11). This definition is missing in the device tree. Signed-off-by: Marek Belisko Signed-off-by: Sebastian Reichel Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/twl4030.dtsi | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/twl4030.dtsi b/arch/arm/boot/dts/twl4030.dtsi index 36ae9160b558..16533b62b0a2 100644 --- a/arch/arm/boot/dts/twl4030.dtsi +++ b/arch/arm/boot/dts/twl4030.dtsi @@ -23,6 +23,8 @@ compatible = "ti,twl4030-bci"; interrupts = <9>, <2>; bci3v1-supply = <&vusb3v1>; + io-channels = <&twl_madc 11>; + io-channel-names = "vac"; }; watchdog { -- cgit v1.2.3 From accc55d9baebee484d04ac198b91fc6568a242e9 Mon Sep 17 00:00:00 2001 From: Robert Nelson Date: Tue, 30 May 2017 11:20:23 -0500 Subject: ARM: dts: Add am335x-boneblue BeagleBone Blue is robotics-oriented version of the BeagleBone Black (BBB). This board can be indentified by the BLAx value after A335BNLT (BBB) in the at24 eeprom: BLAx [aa 55 33 ee 41 33 33 35 42 4e 4c 54 42 4c 41 30 |.U3.A335BNLTBLA2|] http://beagleboard.org/blue https://github.com/beagleboard/beaglebone-blue firmware: https://github.com/beagleboard/beaglebone-black-wireless/tree/master/firmware wl18xx mac address: /proc/device-tree/ocp/ethernet@4a100000/slave@4a100200/mac-address Signed-off-by: Robert Nelson CC: Jason Kridner CC: Drew Fustini Acked-by: Jason Kridner Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/am335x-boneblue.dts | 460 ++++++++++++++++++++++++++++++++++ 2 files changed, 461 insertions(+) create mode 100644 arch/arm/boot/dts/am335x-boneblue.dts (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 9c5e1d944d1c..663b1132c5c4 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -603,6 +603,7 @@ dtb-$(CONFIG_SOC_AM33XX) += \ am335x-bone.dtb \ am335x-boneblack.dtb \ am335x-boneblack-wireless.dtb \ + am335x-boneblue.dtb \ am335x-bonegreen.dtb \ am335x-bonegreen-wireless.dtb \ am335x-chiliboard.dtb \ diff --git a/arch/arm/boot/dts/am335x-boneblue.dts b/arch/arm/boot/dts/am335x-boneblue.dts new file mode 100644 index 000000000000..cdc1b2be792f --- /dev/null +++ b/arch/arm/boot/dts/am335x-boneblue.dts @@ -0,0 +1,460 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +#include "am33xx.dtsi" +#include + +/ { + model = "TI AM335x BeagleBone Blue"; + compatible = "ti,am335x-bone-blue", "ti,am33xx"; + + cpus { + cpu@0 { + cpu0-supply = <&dcdc2_reg>; + }; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x20000000>; /* 512 MB */ + }; + + chosen { + stdout-path = &uart0; + }; + + leds { + pinctrl-names = "default"; + pinctrl-0 = <&user_leds_s0>; + + compatible = "gpio-leds"; + + usr_0_led { + label = "beaglebone:green:usr0"; + gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + default-state = "off"; + }; + + usr_1_led { + label = "beaglebone:green:usr1"; + gpios = <&gpio1 22 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "mmc0"; + default-state = "off"; + }; + + usr_2_led { + label = "beaglebone:green:usr2"; + gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "cpu0"; + default-state = "off"; + }; + + usr_3_led { + label = "beaglebone:green:usr3"; + gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "mmc1"; + default-state = "off"; + }; + + wifi_led { + label = "wifi"; + gpios = <&gpio0 19 GPIO_ACTIVE_HIGH>; + default-state = "off"; + linux,default-trigger = "phy0assoc"; + }; + + red_led { + label = "red"; + gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + green_led { + label = "green"; + gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + batt_1_led { + label = "bat25"; + gpios = <&gpio0 27 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + batt_2_led { + label = "bat50"; + gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + batt_3_led { + label = "bat75"; + gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + batt_4_led { + label = "bat100"; + gpios = <&gpio0 26 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + }; + + vmmcsd_fixed: fixedregulator0 { + compatible = "regulator-fixed"; + regulator-name = "vmmcsd_fixed"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + wlan_en_reg: fixedregulator@2 { + compatible = "regulator-fixed"; + regulator-name = "wlan-en-regulator"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + startup-delay-us= <70000>; + + /* WL_EN */ + gpio = <&gpio3 9 0>; + enable-active-high; + }; +}; + +&am33xx_pinmux { + user_leds_s0: user_leds_s0 { + pinctrl-single,pins = < + AM33XX_IOPAD(0x854, PIN_OUTPUT | MUX_MODE7) /* (V15) gpmc_a5.gpio1[21] - USR_LED_0 */ + AM33XX_IOPAD(0x858, PIN_OUTPUT | MUX_MODE7) /* (U15) gpmc_a6.gpio1[22] - USR_LED_1 */ + AM33XX_IOPAD(0x85c, PIN_OUTPUT | MUX_MODE7) /* (T15) gpmc_a7.gpio1[23] - USR_LED_2 */ + AM33XX_IOPAD(0x860, PIN_OUTPUT | MUX_MODE7) /* (V16) gpmc_a8.gpio1[24] - USR_LED_3 */ + AM33XX_IOPAD(0x9b0, PIN_OUTPUT | MUX_MODE7) /* (A15) xdma_event_intr0.gpio0[19] - WIFI_LED */ + AM33XX_IOPAD(0x890, PIN_OUTPUT | MUX_MODE7) /* (R7) gpmc_advn_ale.gpio2[2] - P8.7, LED_RED, GP1_PIN_5 */ + AM33XX_IOPAD(0x894, PIN_OUTPUT | MUX_MODE7) /* (T7) gpmc_oen_ren.gpio2[3] - P8.8, LED_GREEN, GP1_PIN_6 */ + AM33XX_IOPAD(0x82c, PIN_OUTPUT | MUX_MODE7) /* (U12) gpmc_ad11.gpio0[27] - P8.17, BATT_LED_1 */ + AM33XX_IOPAD(0x8dc, PIN_OUTPUT | MUX_MODE7) /* (T5) lcd_data15.gpio0[11] - P8.32, BATT_LED_2 */ + AM33XX_IOPAD(0x87c, PIN_OUTPUT | MUX_MODE7) /* (V6) gpmc_csn0.gpio1[29] - P8.26, BATT_LED_3 */ + AM33XX_IOPAD(0x828, PIN_OUTPUT | MUX_MODE7) /* (T11) gpmc_ad10.gpio0[26] - P8.14, BATT_LED_4 */ + + >; + }; + + i2c0_pins: pinmux_i2c0_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x988, PIN_INPUT_PULLUP | MUX_MODE0) /* (C17) I2C0_SDA.I2C0_SDA */ + AM33XX_IOPAD(0x98c, PIN_INPUT_PULLUP | MUX_MODE0) /* (C16) I2C0_SCL.I2C0_SCL */ + >; + }; + + i2c2_pins: pinmux_i2c2_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x978, PIN_INPUT_PULLUP | MUX_MODE3) /* (D18) uart1_ctsn.I2C2_SDA */ + AM33XX_IOPAD(0x97c, PIN_INPUT_PULLUP | MUX_MODE3) /* (D17) uart1_rtsn.I2C2_SCL */ + >; + }; + + uart0_pins: pinmux_uart0_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0) /* (E15) uart0_rxd.uart0_rxd */ + AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* (E16) uart0_txd.uart0_txd */ + >; + }; + + mmc1_pins: pinmux_mmc1_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x960, PIN_INPUT | MUX_MODE7) /* (C15) spi0_cs1.gpio0[6] */ + >; + }; + + mmc2_pins: pinmux_mmc2_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x880, PIN_INPUT_PULLUP | MUX_MODE2) /* (U9) gpmc_csn1.mmc1_clk */ + AM33XX_IOPAD(0x884, PIN_INPUT_PULLUP | MUX_MODE2) /* (V9) gpmc_csn2.mmc1_cmd */ + AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE1) /* (U7) gpmc_ad0.mmc1_dat0 */ + AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE1) /* (V7) gpmc_ad1.mmc1_dat1 */ + AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE1) /* (R8) gpmc_ad2.mmc1_dat2 */ + AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE1) /* (T8) gpmc_ad3.mmc1_dat3 */ + AM33XX_IOPAD(0x810, PIN_INPUT_PULLUP | MUX_MODE1) /* (U8) gpmc_ad4.mmc1_dat4 */ + AM33XX_IOPAD(0x814, PIN_INPUT_PULLUP | MUX_MODE1) /* (V8) gpmc_ad5.mmc1_dat5 */ + AM33XX_IOPAD(0x818, PIN_INPUT_PULLUP | MUX_MODE1) /* (R9) gpmc_ad6.mmc1_dat6 */ + AM33XX_IOPAD(0x81c, PIN_INPUT_PULLUP | MUX_MODE1) /* (T9) gpmc_ad7.mmc1_dat7 */ + >; + }; + + mmc3_pins: pinmux_mmc3_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x93c, PIN_INPUT_PULLUP | MUX_MODE6) /* (L15) gmii1_rxd1.mmc2_clk */ + AM33XX_IOPAD(0x914, PIN_INPUT_PULLUP | MUX_MODE6) /* (J16) gmii1_txen.mmc2_cmd */ + AM33XX_IOPAD(0x918, PIN_INPUT_PULLUP | MUX_MODE5) /* (J17) gmii1_rxdv.mmc2_dat0 */ + AM33XX_IOPAD(0x91c, PIN_INPUT_PULLUP | MUX_MODE5) /* (J18) gmii1_txd3.mmc2_dat1 */ + AM33XX_IOPAD(0x920, PIN_INPUT_PULLUP | MUX_MODE5) /* (K15) gmii1_txd2.mmc2_dat2 */ + AM33XX_IOPAD(0x908, PIN_INPUT_PULLUP | MUX_MODE5) /* (H16) gmii1_col.mmc2_dat3 */ + >; + }; + + bt_pins: pinmux_bt_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x928, PIN_OUTPUT_PULLUP | MUX_MODE7) /* (K17) gmii1_txd0.gpio0[28] - BT_EN */ + >; + }; + + uart3_pins: pinmux_uart3_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x934, PIN_INPUT_PULLUP | MUX_MODE1) /* (L17) gmii1_rxd3.uart3_rxd */ + AM33XX_IOPAD(0x938, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* (L16) gmii1_rxd2.uart3_txd */ + AM33XX_IOPAD(0x948, PIN_INPUT | MUX_MODE3) /* (M17) mdio_data.uart3_ctsn */ + AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* (M18) mdio_clk.uart3_rtsn */ + >; + }; + + wl18xx_pins: pinmux_wl18xx_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x92c, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* (K18) gmii1_txclk.gpio3[9] - WL_EN */ + AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE7) /* (H18) rmii1_refclk.gpio0[29] - WL_IRQ */ + AM33XX_IOPAD(0x930, PIN_OUTPUT_PULLUP | MUX_MODE7) /* (L18) gmii1_rxclk.gpio3[10] - LS_BUF_EN */ + >; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins>; + + status = "okay"; +}; + +&usb { + status = "okay"; +}; + +&usb_ctrl_mod { + status = "okay"; +}; + +&usb0_phy { + status = "okay"; +}; + +&usb1_phy { + status = "okay"; +}; + +&usb0 { + status = "okay"; + dr_mode = "peripheral"; + interrupts-extended = <&intc 18 &tps 0>; + interrupt-names = "mc", "vbus"; +}; + +&usb1 { + status = "okay"; + dr_mode = "host"; +}; + +&cppi41dma { + status = "okay"; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; + + status = "okay"; + clock-frequency = <400000>; + + tps: tps@24 { + reg = <0x24>; + }; + + baseboard_eeprom: baseboard_eeprom@50 { + compatible = "at,24c256"; + reg = <0x50>; + + #address-cells = <1>; + #size-cells = <1>; + baseboard_data: baseboard_data@0 { + reg = <0 0x100>; + }; + }; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins>; + + status = "okay"; + clock-frequency = <400000>; + + mpu9250@68 { + compatible = "invensense,mpu9250"; + reg = <0x68>; + interrupt-parent = <&gpio3>; + interrupts = <21 GPIO_ACTIVE_LOW>; + i2c-gate { + #address-cells = <1>; + #size-cells = <0>; + ax8975@c { + compatible = "ak,ak8975"; + reg = <0x0c>; + }; + }; + }; + + pressure@76 { + compatible = "bosch,bmp280"; + reg = <0x76>; + }; +}; + +/include/ "tps65217.dtsi" + +&tps { + interrupts = <7>; /* NMI */ + interrupt-parent = <&intc>; + + charger { + interrupts = <0>, <1>; + interrupt-names = "USB", "AC"; + status = "okay"; + }; + + pwrbutton { + interrupts = <2>; + status = "okay"; + }; + + regulators { + dcdc1_reg: regulator@0 { + regulator-name = "vdds_dpr"; + regulator-always-on; + }; + + dcdc2_reg: regulator@1 { + /* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */ + regulator-name = "vdd_mpu"; + regulator-min-microvolt = <925000>; + regulator-max-microvolt = <1351500>; + regulator-boot-on; + regulator-always-on; + }; + + dcdc3_reg: regulator@2 { + /* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */ + regulator-name = "vdd_core"; + regulator-min-microvolt = <925000>; + regulator-max-microvolt = <1150000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo1_reg: regulator@3 { + regulator-name = "vio,vrtc,vdds"; + regulator-always-on; + }; + + ldo2_reg: regulator@4 { + regulator-name = "vdd_3v3aux"; + regulator-always-on; + }; + + ldo3_reg: regulator@5 { + regulator-name = "vdd_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo4_reg: regulator@6 { + regulator-name = "vdd_3v3a"; + regulator-always-on; + }; + }; +}; + +&mmc1 { + status = "okay"; + vmmc-supply = <&vmmcsd_fixed>; + bus-width = <4>; + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins>; + cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>; +}; + +&mmc2 { + status = "okay"; + vmmc-supply = <&vmmcsd_fixed>; + bus-width = <8>; + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_pins>; +}; + +&mmc3 { + dmas = <&edma_xbar 12 0 1 + &edma_xbar 13 0 2>; + dma-names = "tx", "rx"; + status = "okay"; + vmmc-supply = <&wlan_en_reg>; + bus-width = <4>; + non-removable; + cap-power-off-card; + ti,needs-special-hs-handling; + keep-power-in-suspend; + pinctrl-names = "default"; + pinctrl-0 = <&mmc3_pins &wl18xx_pins>; + + #address-cells = <1>; + #size-cells = <0>; + wlcore: wlcore@2 { + compatible = "ti,wl1835"; + reg = <2>; + interrupt-parent = <&gpio0>; + interrupts = <29 IRQ_TYPE_EDGE_RISING>; + }; +}; + +&tscadc { + status = "okay"; + adc { + ti,adc-channels = <0 1 2 3 4 5 6 7>; + }; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&uart3_pins &bt_pins>; + status = "okay"; + + bluetooth { + compatible = "ti,wl1835-st"; + enable-gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>; + }; +}; + +&aes { + status = "okay"; +}; + +&sham { + status = "okay"; +}; + +&rtc { + system-power-controller; + clocks = <&clk_32768_ck>, <&clkdiv32k_ick>; + clock-names = "ext-clk", "int-clk"; +}; + +&gpio3 { + ls_buf_en { + gpio-hog; + gpios = <10 GPIO_ACTIVE_HIGH>; + output-high; + line-name = "LS_BUF_EN"; + }; +}; -- cgit v1.2.3 From d132a000887b47e2d8ba711224d19bd58727abe2 Mon Sep 17 00:00:00 2001 From: Keerthy Date: Fri, 2 Jun 2017 14:54:01 +0530 Subject: ARM: dts: AM43XX: Remove min and max voltage values for dcdc3 dcdc3 supplies to DDR on AM43x series. When we set both min and max values to the same value. The regulator framework sets that particular voltage. This is bad as we are changing the ddr voltage when executing from ddr. Hence remove the min and max values. The ddr supply voltage shall be set from bootloader when not executing from ddr and not while executing from kernel. The previous discussion can be found here: http://www.spinics.net/lists/devicetree/msg56399.html Signed-off-by: Keerthy Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/am437x-gp-evm.dts | 2 -- arch/arm/boot/dts/am437x-sk-evm.dts | 2 -- arch/arm/boot/dts/am43x-epos-evm.dts | 2 -- 3 files changed, 6 deletions(-) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/am437x-gp-evm.dts b/arch/arm/boot/dts/am437x-gp-evm.dts index 397e98b7e246..29a538ecd405 100644 --- a/arch/arm/boot/dts/am437x-gp-evm.dts +++ b/arch/arm/boot/dts/am437x-gp-evm.dts @@ -549,8 +549,6 @@ dcdc3: regulator-dcdc3 { regulator-name = "vdcdc3"; - regulator-min-microvolt = <1500000>; - regulator-max-microvolt = <1500000>; regulator-boot-on; regulator-always-on; regulator-state-mem { diff --git a/arch/arm/boot/dts/am437x-sk-evm.dts b/arch/arm/boot/dts/am437x-sk-evm.dts index a62e1583da04..2c6bf0684f50 100644 --- a/arch/arm/boot/dts/am437x-sk-evm.dts +++ b/arch/arm/boot/dts/am437x-sk-evm.dts @@ -451,8 +451,6 @@ dcdc3: regulator-dcdc3 { regulator-name = "vdds_ddr"; - regulator-min-microvolt = <1500000>; - regulator-max-microvolt = <1500000>; regulator-boot-on; regulator-always-on; regulator-state-mem { diff --git a/arch/arm/boot/dts/am43x-epos-evm.dts b/arch/arm/boot/dts/am43x-epos-evm.dts index f6648ab10d29..54f40f370011 100644 --- a/arch/arm/boot/dts/am43x-epos-evm.dts +++ b/arch/arm/boot/dts/am43x-epos-evm.dts @@ -442,8 +442,6 @@ dcdc3: regulator-dcdc3 { regulator-name = "vdcdc3"; - regulator-min-microvolt = <1500000>; - regulator-max-microvolt = <1500000>; regulator-boot-on; regulator-always-on; }; -- cgit v1.2.3 From 7ff64afbc73c32171d9e08aa5444c68a654bb9d0 Mon Sep 17 00:00:00 2001 From: Robert Nelson Date: Mon, 5 Jun 2017 10:36:21 -0500 Subject: ARM: dts: bonegreen-wireless: add WL1835 Bluetooth device node This adds the serial slave device for the WL1835 Bluetooth interface. Signed-off-by: Robert Nelson CC: Ricardo Salveti CC: Tony Lindgren CC: Jason Kridner Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/am335x-bonegreen-wireless.dts | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/am335x-bonegreen-wireless.dts b/arch/arm/boot/dts/am335x-bonegreen-wireless.dts index 9d1a0fd555f3..57731f0daf10 100644 --- a/arch/arm/boot/dts/am335x-bonegreen-wireless.dts +++ b/arch/arm/boot/dts/am335x-bonegreen-wireless.dts @@ -97,6 +97,11 @@ pinctrl-names = "default"; pinctrl-0 = <&uart3_pins &bt_pins>; status = "okay"; + + bluetooth { + compatible = "ti,wl1835-st"; + enable-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>; + }; }; &gpio1 { -- cgit v1.2.3 From de09eb52a1cceb6f80464a008c67c7bebb242314 Mon Sep 17 00:00:00 2001 From: Suniel Mahesh Date: Mon, 5 Jun 2017 23:47:16 +0530 Subject: arm: dts: am33xx: Remove redundant interrupt-parent property Interrupt-parent property is defined in the root node as "interrupt-parent = <&intc>". This interrupt-parent value becomes the default for the system, so removed redundant "interrupt-parent" property from mmc, mac, lcdc and tscadc nodes. Signed-off-by: Suniel Mahesh Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/am33xx.dtsi | 6 ------ 1 file changed, 6 deletions(-) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi index bdacb3dd689c..7d7ca054c557 100644 --- a/arch/arm/boot/dts/am33xx.dtsi +++ b/arch/arm/boot/dts/am33xx.dtsi @@ -431,7 +431,6 @@ &edma_xbar 25 0 0>; dma-names = "tx", "rx"; interrupts = <64>; - interrupt-parent = <&intc>; reg = <0x48060000 0x1000>; status = "disabled"; }; @@ -444,7 +443,6 @@ &edma 3 0>; dma-names = "tx", "rx"; interrupts = <28>; - interrupt-parent = <&intc>; reg = <0x481d8000 0x1000>; status = "disabled"; }; @@ -454,7 +452,6 @@ ti,hwmods = "mmc3"; ti,needs-special-reset; interrupts = <29>; - interrupt-parent = <&intc>; reg = <0x47810000 0x1000>; status = "disabled"; }; @@ -853,7 +850,6 @@ 0x4a101200 0x100>; #address-cells = <1>; #size-cells = <1>; - interrupt-parent = <&intc>; /* * c0_rx_thresh_pend * c0_rx_pend @@ -908,7 +904,6 @@ lcdc: lcdc@4830e000 { compatible = "ti,am33xx-tilcdc"; reg = <0x4830e000 0x1000>; - interrupt-parent = <&intc>; interrupts = <36>; ti,hwmods = "lcdc"; status = "disabled"; @@ -917,7 +912,6 @@ tscadc: tscadc@44e0d000 { compatible = "ti,am3359-tscadc"; reg = <0x44e0d000 0x1000>; - interrupt-parent = <&intc>; interrupts = <16>; ti,hwmods = "adc_tsc"; status = "disabled"; -- cgit v1.2.3 From 65878b126c8f2d761273241cf778b1c6aa50c500 Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Tue, 30 May 2017 18:21:25 -0700 Subject: ARM: dts: da850-evm: fix tca6416 for use with GPIO hogs In order GPIOS from this controller to be used with the "gpio-hogs" property, the tca6416 node has to properly labeled as a gpio-controller, and use #gpio-cells. With that, the SEL_A, SEL_B, SEL_C lines that are used to select VPIF input can be configured using GPIO hogs. As an example, example, the configuration below selects the analog video input on the da850-evm UI board: &tca6416 { status = "okay"; sel_a { gpio-hog; gpios = <7 GPIO_ACTIVE_HIGH>; output-high; line-name = "ADC_ENn"; }; sel_b { gpio-hog; gpios = <6 GPIO_ACTIVE_HIGH>; output-high; line-name = "CAMERA_ENn"; }; sel_c { gpio-hog; gpios = <5 GPIO_ACTIVE_HIGH>; output-low; line-name = "VIDEO_IN_ENn"; }; }; Signed-off-by: Kevin Hilman Signed-off-by: Sekhar Nori --- arch/arm/boot/dts/da850-evm.dts | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/da850-evm.dts b/arch/arm/boot/dts/da850-evm.dts index 8d244cd76c36..a423e8ebfb37 100644 --- a/arch/arm/boot/dts/da850-evm.dts +++ b/arch/arm/boot/dts/da850-evm.dts @@ -82,6 +82,8 @@ tca6416: gpio@20 { compatible = "ti,tca6416"; reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; }; }; wdt: wdt@21000 { -- cgit v1.2.3 From 98d87eb5664b5a39d6dcb66639b6b7e536d71ffb Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Mon, 5 Jun 2017 17:00:32 +0800 Subject: ARM: sunxi: h3-h5: Convert R_CCU raw numbers to macros Now that the R_CCU device tree binding headers have been merged, we can convert the raw number references in the device trees to use the defined macros. Signed-off-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sunxi-h3-h5.dtsi | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/sunxi-h3-h5.dtsi b/arch/arm/boot/dts/sunxi-h3-h5.dtsi index 1aeeacb3a884..a7e858a82c90 100644 --- a/arch/arm/boot/dts/sunxi-h3-h5.dtsi +++ b/arch/arm/boot/dts/sunxi-h3-h5.dtsi @@ -41,8 +41,10 @@ */ #include +#include #include #include +#include / { interrupt-parent = <&gic>; @@ -573,9 +575,9 @@ ir: ir@01f02000 { compatible = "allwinner,sun5i-a13-ir"; - clocks = <&r_ccu 4>, <&r_ccu 11>; + clocks = <&r_ccu CLK_APB0_IR>, <&r_ccu CLK_IR>; clock-names = "apb", "ir"; - resets = <&r_ccu 0>; + resets = <&r_ccu RST_APB0_IR>; interrupts = ; reg = <0x01f02000 0x40>; status = "disabled"; @@ -585,7 +587,7 @@ compatible = "allwinner,sun8i-h3-r-pinctrl"; reg = <0x01f02c00 0x400>; interrupts = ; - clocks = <&r_ccu 3>, <&osc24M>, <&osc32k>; + clocks = <&r_ccu CLK_APB0_PIO>, <&osc24M>, <&osc32k>; clock-names = "apb", "hosc", "losc"; gpio-controller; #gpio-cells = <3>; -- cgit v1.2.3 From d91d3daf5de90e0118227d8ddcb7bb4ff40c1b91 Mon Sep 17 00:00:00 2001 From: Corentin Labbe Date: Wed, 31 May 2017 09:18:37 +0200 Subject: arm: sun8i: sunxi-h3-h5: Add dt node for the syscon control module This patch add the dt node for the syscon register present on the Allwinner H3/H5 Only two register are present in this syscon and the only one useful is the one dedicated to EMAC clock.. Signed-off-by: Corentin Labbe Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sunxi-h3-h5.dtsi | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/sunxi-h3-h5.dtsi b/arch/arm/boot/dts/sunxi-h3-h5.dtsi index a7e858a82c90..61f729168c89 100644 --- a/arch/arm/boot/dts/sunxi-h3-h5.dtsi +++ b/arch/arm/boot/dts/sunxi-h3-h5.dtsi @@ -85,6 +85,12 @@ #size-cells = <1>; ranges; + syscon: syscon@1c00000 { + compatible = "allwinner,sun8i-h3-system-controller", + "syscon"; + reg = <0x01c00000 0x1000>; + }; + dma: dma-controller@01c02000 { compatible = "allwinner,sun8i-h3-dma"; reg = <0x01c02000 0x1000>; -- cgit v1.2.3 From 0eba511a3cac29d6338b22b5b727f40cf8d163df Mon Sep 17 00:00:00 2001 From: Corentin Labbe Date: Wed, 31 May 2017 09:18:38 +0200 Subject: arm: sun8i: sunxi-h3-h5: add dwmac-sun8i ethernet driver The dwmac-sun8i is an ethernet MAC hardware that support 10/100/1000 speed. This patch enable the dwmac-sun8i on Allwinner H3/H5 SoC Device-tree. SoC H3/H5 have an internal PHY, so optionals syscon and ephy are set. Signed-off-by: Corentin Labbe Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sunxi-h3-h5.dtsi | 34 ++++++++++++++++++++++++++++++++++ 1 file changed, 34 insertions(+) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/sunxi-h3-h5.dtsi b/arch/arm/boot/dts/sunxi-h3-h5.dtsi index 61f729168c89..1fc663bdfdda 100644 --- a/arch/arm/boot/dts/sunxi-h3-h5.dtsi +++ b/arch/arm/boot/dts/sunxi-h3-h5.dtsi @@ -287,6 +287,14 @@ interrupt-controller; #interrupt-cells = <3>; + emac_rgmii_pins: emac0 { + pins = "PD0", "PD1", "PD2", "PD3", "PD4", + "PD5", "PD7", "PD8", "PD9", "PD10", + "PD12", "PD13", "PD15", "PD16", "PD17"; + function = "emac"; + drive-strength = <40>; + }; + i2c0_pins: i2c0 { pins = "PA11", "PA12"; function = "i2c0"; @@ -383,6 +391,32 @@ clocks = <&osc24M>; }; + emac: ethernet@1c30000 { + compatible = "allwinner,sun8i-h3-emac"; + syscon = <&syscon>; + reg = <0x01c30000 0x104>; + interrupts = ; + interrupt-names = "macirq"; + resets = <&ccu RST_BUS_EMAC>; + reset-names = "stmmaceth"; + clocks = <&ccu CLK_BUS_EMAC>; + clock-names = "stmmaceth"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + mdio: mdio { + #address-cells = <1>; + #size-cells = <0>; + int_mii_phy: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + clocks = <&ccu CLK_BUS_EPHY>; + resets = <&ccu RST_BUS_EPHY>; + }; + }; + }; + spi0: spi@01c68000 { compatible = "allwinner,sun8i-h3-spi"; reg = <0x01c68000 0x1000>; -- cgit v1.2.3 From d342cb6f018a6967e52ff7701beac2ead15530cb Mon Sep 17 00:00:00 2001 From: Corentin Labbe Date: Wed, 31 May 2017 09:18:39 +0200 Subject: arm: sun8i: orangepi-pc: Enable dwmac-sun8i The dwmac-sun8i hardware is present on the Orange PI PC. It uses the internal PHY. This patch create the needed emac node. Signed-off-by: Corentin Labbe Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts index f148111c326d..52e65755c51a 100644 --- a/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts +++ b/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts @@ -52,6 +52,7 @@ compatible = "xunlong,orangepi-pc", "allwinner,sun8i-h3"; aliases { + ethernet0 = &emac; serial0 = &uart0; }; @@ -109,6 +110,13 @@ status = "okay"; }; +&emac { + phy-handle = <&int_mii_phy>; + phy-mode = "mii"; + allwinner,leds-active-low; + status = "okay"; +}; + &ir { pinctrl-names = "default"; pinctrl-0 = <&ir_pins_a>; -- cgit v1.2.3 From 25b9c3f58d2917c3e3cb572f4af5b67d562143dd Mon Sep 17 00:00:00 2001 From: Corentin Labbe Date: Wed, 31 May 2017 09:18:41 +0200 Subject: arm: sun8i: orangepi-one: Enable dwmac-sun8i The dwmac-sun8i hardware is present on the Orange PI One. It uses the internal PHY. This patch create the needed emac node. Signed-off-by: Corentin Labbe Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun8i-h3-orangepi-one.dts | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts index 5fea430e0eb1..6880268e8b87 100644 --- a/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts +++ b/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts @@ -52,6 +52,7 @@ compatible = "xunlong,orangepi-one", "allwinner,sun8i-h3"; aliases { + ethernet0 = &emac; serial0 = &uart0; }; @@ -97,6 +98,13 @@ status = "okay"; }; +&emac { + phy-handle = <&int_mii_phy>; + phy-mode = "mii"; + allwinner,leds-active-low; + status = "okay"; +}; + &mmc0 { pinctrl-names = "default"; pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>; -- cgit v1.2.3 From a9992f2dd1890112643a93d621ff5a4c97c55d53 Mon Sep 17 00:00:00 2001 From: Corentin Labbe Date: Wed, 31 May 2017 09:18:42 +0200 Subject: arm: sun8i: orangepi-2: Enable dwmac-sun8i The dwmac-sun8i hardware is present on the Orange PI 2. It uses the internal PHY. This patch create the needed emac node. Signed-off-by: Corentin Labbe Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun8i-h3-orangepi-2.dts | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-2.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-2.dts index 5b6d14555b7c..cedd326b6089 100644 --- a/arch/arm/boot/dts/sun8i-h3-orangepi-2.dts +++ b/arch/arm/boot/dts/sun8i-h3-orangepi-2.dts @@ -54,6 +54,7 @@ aliases { serial0 = &uart0; /* ethernet0 is the H3 emac, defined in sun8i-h3.dtsi */ + ethernet0 = &emac; ethernet1 = &rtl8189; }; @@ -108,6 +109,13 @@ status = "okay"; }; +&emac { + phy-handle = <&int_mii_phy>; + phy-mode = "mii"; + allwinner,leds-active-low; + status = "okay"; +}; + &ir { pinctrl-names = "default"; pinctrl-0 = <&ir_pins_a>; -- cgit v1.2.3 From 75ee680cbd2e4d0156b94f9fec50076361ab12f2 Mon Sep 17 00:00:00 2001 From: Corentin Labbe Date: Wed, 31 May 2017 09:18:43 +0200 Subject: arm: sun8i: orangepi-pc-plus: Set EMAC activity LEDs to active high On the Orange Pi PC Plus, the polarity of the LEDs on the RJ45 Ethernet port were changed from active low to active high. Signed-off-by: Chen-Yu Tsai Signed-off-by: Corentin Labbe Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun8i-h3-orangepi-pc-plus.dts | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-pc-plus.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-pc-plus.dts index 8b93f5c781a7..a10281b455f5 100644 --- a/arch/arm/boot/dts/sun8i-h3-orangepi-pc-plus.dts +++ b/arch/arm/boot/dts/sun8i-h3-orangepi-pc-plus.dts @@ -53,6 +53,11 @@ }; }; +&emac { + /* LEDs changed to active high on the plus */ + /delete-property/ allwinner,leds-active-low; +}; + &mmc1 { pinctrl-names = "default"; pinctrl-0 = <&mmc1_pins_a>; -- cgit v1.2.3 From 378af662f8d4a30ceddae1e5c5d1acb6da7f9796 Mon Sep 17 00:00:00 2001 From: Corentin Labbe Date: Wed, 31 May 2017 09:18:44 +0200 Subject: arm: sun8i: nanopi-neo: Enable dwmac-sun8i The dwmac-sun8i hardware is present on the NanoPi Neo. It uses the internal PHY. This patch create the needed emac node. Signed-off-by: Corentin Labbe Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun8i-h3-nanopi-neo.dts | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi-neo.dts b/arch/arm/boot/dts/sun8i-h3-nanopi-neo.dts index 8d2cc6e9a03f..78f6c24952dd 100644 --- a/arch/arm/boot/dts/sun8i-h3-nanopi-neo.dts +++ b/arch/arm/boot/dts/sun8i-h3-nanopi-neo.dts @@ -46,3 +46,10 @@ model = "FriendlyARM NanoPi NEO"; compatible = "friendlyarm,nanopi-neo", "allwinner,sun8i-h3"; }; + +&emac { + phy-handle = <&int_mii_phy>; + phy-mode = "mii"; + allwinner,leds-active-low; + status = "okay"; +}; -- cgit v1.2.3 From 1dcd0095019aca7533eaeed9475d995a4eb30137 Mon Sep 17 00:00:00 2001 From: Corentin Labbe Date: Mon, 5 Jun 2017 21:21:26 +0200 Subject: ARM: sun8i: orangepi-plus: Enable dwmac-sun8i The dwmac-sun8i hardware is present on the Orange PI plus. It uses an external PHY rtl8211e via RGMII. This patch create the needed regulator, emac and phy nodes. Signed-off-by: Corentin Labbe Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts | 32 ++++++++++++++++++++++++++++ 1 file changed, 32 insertions(+) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts index 8c40ab7bfa72..331ed683ac62 100644 --- a/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts +++ b/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts @@ -47,6 +47,20 @@ model = "Xunlong Orange Pi Plus / Plus 2"; compatible = "xunlong,orangepi-plus", "allwinner,sun8i-h3"; + aliases { + ethernet0 = &emac; + }; + + reg_gmac_3v3: gmac-3v3 { + compatible = "regulator-fixed"; + regulator-name = "gmac-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + startup-delay-us = <100000>; + enable-active-high; + gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>; + }; + reg_usb3_vbus: usb3-vbus { compatible = "regulator-fixed"; pinctrl-names = "default"; @@ -64,6 +78,24 @@ status = "okay"; }; +&emac { + pinctrl-names = "default"; + pinctrl-0 = <&emac_rgmii_pins>; + phy-supply = <®_gmac_3v3>; + phy-handle = <&ext_rgmii_phy>; + phy-mode = "rgmii"; + + allwinner,leds-active-low; + status = "okay"; +}; + +&mdio { + ext_rgmii_phy: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + }; +}; + &mmc2 { pinctrl-names = "default"; pinctrl-0 = <&mmc2_8bit_pins>; -- cgit v1.2.3 From 8c7ba536e70976e09b148b43be1299abf3cc1560 Mon Sep 17 00:00:00 2001 From: Corentin Labbe Date: Mon, 5 Jun 2017 21:21:27 +0200 Subject: ARM: sun8i: bananapi-m2-plus: Enable dwmac-sun8i The dwmac-sun8i hardware is present on the Banana Pi M2+ It uses an external PHY rtl8211e via RGMII. This patch create the needed regulator, emac and phy nodes. Signed-off-by: Corentin Labbe Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts | 29 +++++++++++++++++++++++++ 1 file changed, 29 insertions(+) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts b/arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts index 52acbe111cad..fef652b883fb 100644 --- a/arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts +++ b/arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts @@ -52,6 +52,7 @@ compatible = "sinovoip,bpi-m2-plus", "allwinner,sun8i-h3"; aliases { + ethernet0 = &emac; serial0 = &uart0; serial1 = &uart1; }; @@ -84,6 +85,16 @@ }; }; + reg_gmac_3v3: gmac-3v3 { + compatible = "regulator-fixed"; + regulator-name = "gmac-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + startup-delay-us = <100000>; + enable-active-high; + gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>; + }; + wifi_pwrseq: wifi_pwrseq { compatible = "mmc-pwrseq-simple"; pinctrl-names = "default"; @@ -100,12 +111,30 @@ status = "okay"; }; +&emac { + pinctrl-names = "default"; + pinctrl-0 = <&emac_rgmii_pins>; + phy-supply = <®_gmac_3v3>; + phy-handle = <&ext_rgmii_phy>; + phy-mode = "rgmii"; + + allwinner,leds-active-low; + status = "okay"; +}; + &ir { pinctrl-names = "default"; pinctrl-0 = <&ir_pins_a>; status = "okay"; }; +&mdio { + ext_rgmii_phy: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + }; +}; + &mmc0 { pinctrl-names = "default"; pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>; -- cgit v1.2.3 From 252006cf0da13e65151cd7e7d0d6bb14bc0ca815 Mon Sep 17 00:00:00 2001 From: Corentin Labbe Date: Wed, 31 May 2017 09:18:40 +0200 Subject: arm: sun8i: orangepi-zero: Enable dwmac-sun8i The dwmac-sun8i hardware is present on the Orange PI Zero. It uses the internal PHY. This patch create the needed emac node. Signed-off-by: Corentin Labbe Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts b/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts index 9e8b082c134f..dd3525a0f06a 100644 --- a/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts +++ b/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts @@ -57,6 +57,7 @@ aliases { serial0 = &uart0; /* ethernet0 is the H3 emac, defined in sun8i-h3.dtsi */ + ethernet0 = &emac; ethernet1 = &xr819; }; @@ -103,6 +104,13 @@ status = "okay"; }; +&emac { + phy-handle = <&int_mii_phy>; + phy-mode = "mii"; + allwinner,leds-active-low; + status = "okay"; +}; + &mmc0 { pinctrl-names = "default"; pinctrl-0 = <&mmc0_pins_a>; -- cgit v1.2.3 From cc20028f68e760d6958e892aba1f9bafbce63e22 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Mon, 5 Jun 2017 13:22:20 -0300 Subject: ARM: dts: imx6: Fix PCI GPIO reset polarity The imx6 PCI driver ignores the GPIO polarity from 'reset-gpio' and considers that the PCI reset is active low, unless the property 'reset-gpio-active-high' is present. Fix the device tree description by explicitly passing the 'GPIO_ACTIVE_LOW' flag to the 'reset-gpio' property. Signed-off-by: Fabio Estevam Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6q-ba16.dtsi | 2 +- arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts | 2 +- arch/arm/boot/dts/imx6q-novena.dts | 2 +- arch/arm/boot/dts/imx6qdl-apf6dev.dtsi | 2 +- arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi | 2 +- arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi | 2 +- arch/arm/boot/dts/imx6sx-nitrogen6sx.dts | 2 +- 7 files changed, 7 insertions(+), 7 deletions(-) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/imx6q-ba16.dtsi b/arch/arm/boot/dts/imx6q-ba16.dtsi index 14fa6b25dc45..5fcb0372d58b 100644 --- a/arch/arm/boot/dts/imx6q-ba16.dtsi +++ b/arch/arm/boot/dts/imx6q-ba16.dtsi @@ -321,7 +321,7 @@ &pcie { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pcie>; - reset-gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>; + reset-gpio = <&gpio7 12 GPIO_ACTIVE_LOW>; fsl,tx-swing-full = <103>; fsl,tx-swing-low = <103>; status = "okay"; diff --git a/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts b/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts index 0c5b2c38214e..33eb7f180995 100644 --- a/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts +++ b/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts @@ -435,7 +435,7 @@ &pcie { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pcie>; - reset-gpio = <&gpio4 8 0>; + reset-gpio = <&gpio4 8 GPIO_ACTIVE_LOW>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6q-novena.dts b/arch/arm/boot/dts/imx6q-novena.dts index c21db67349c4..d83cfb6ec598 100644 --- a/arch/arm/boot/dts/imx6q-novena.dts +++ b/arch/arm/boot/dts/imx6q-novena.dts @@ -446,7 +446,7 @@ &pcie { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pcie_novena>; - reset-gpio = <&gpio3 29 GPIO_ACTIVE_HIGH>; + reset-gpio = <&gpio3 29 GPIO_ACTIVE_LOW>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl-apf6dev.dtsi b/arch/arm/boot/dts/imx6qdl-apf6dev.dtsi index 550e100e85fc..9cd2a7477ed7 100644 --- a/arch/arm/boot/dts/imx6qdl-apf6dev.dtsi +++ b/arch/arm/boot/dts/imx6qdl-apf6dev.dtsi @@ -232,7 +232,7 @@ &pcie { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pcie>; - reset-gpio = <&gpio6 2 GPIO_ACTIVE_HIGH>; + reset-gpio = <&gpio6 2 GPIO_ACTIVE_LOW>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi b/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi index ed6a89f724a5..1b1872873207 100644 --- a/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi +++ b/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi @@ -335,7 +335,7 @@ }; &pcie { - reset-gpio = <&gpio2 16 GPIO_ACTIVE_HIGH>; + reset-gpio = <&gpio2 16 GPIO_ACTIVE_LOW>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi index 6e5cb6a99550..d81b0078a100 100644 --- a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi +++ b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi @@ -374,7 +374,7 @@ &pcie { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pcie>; - reset-gpio = <&gpio4 17 0>; + reset-gpio = <&gpio4 17 GPIO_ACTIVE_LOW>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts b/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts index ac1989e5d5ad..c5578d1c1ee4 100644 --- a/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts +++ b/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts @@ -296,7 +296,7 @@ &pcie { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pcie>; - reset-gpio = <&gpio4 10 GPIO_ACTIVE_HIGH>; + reset-gpio = <&gpio4 10 GPIO_ACTIVE_LOW>; status = "okay"; }; -- cgit v1.2.3 From aac5e972d4c7bc728df605f5427d9c2458c34ea9 Mon Sep 17 00:00:00 2001 From: Garlic Tseng Date: Thu, 1 Jun 2017 13:42:10 +0800 Subject: arm: dts: mediatek: Add audio driver node for MT2701 Add audio driver node for mt2701 Signed-off-by: Garlic Tseng Signed-off-by: Matthias Brugger --- arch/arm/boot/dts/mt2701-evb.dts | 65 ++++++++++++++++++++++++++ arch/arm/boot/dts/mt2701.dtsi | 98 ++++++++++++++++++++++++++++++++++++++++ 2 files changed, 163 insertions(+) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/mt2701-evb.dts b/arch/arm/boot/dts/mt2701-evb.dts index 98bf12c141cb..f48497354221 100644 --- a/arch/arm/boot/dts/mt2701-evb.dts +++ b/arch/arm/boot/dts/mt2701-evb.dts @@ -22,6 +22,40 @@ memory { reg = <0 0x80000000 0 0x40000000>; }; + + sound:sound { + compatible = "mediatek,mt2701-cs42448-machine"; + mediatek,platform = <&afe>; + /* CS42448 Machine name */ + audio-routing = + "Line Out Jack", "AOUT1L", + "Line Out Jack", "AOUT1R", + "Line Out Jack", "AOUT2L", + "Line Out Jack", "AOUT2R", + "Line Out Jack", "AOUT3L", + "Line Out Jack", "AOUT3R", + "Line Out Jack", "AOUT4L", + "Line Out Jack", "AOUT4R", + "AIN1L", "AMIC", + "AIN1R", "AMIC", + "AIN2L", "Tuner In", + "AIN2R", "Tuner In", + "AIN3L", "Satellite Tuner In", + "AIN3R", "Satellite Tuner In", + "AIN3L", "AUX In", + "AIN3R", "AUX In"; + mediatek,audio-codec = <&cs42448>; + mediatek,audio-codec-bt-mrg = <&bt_sco_codec>; + pinctrl-names = "default"; + pinctrl-0 = <&aud_pins_default>; + i2s1-in-sel-gpio1 = <&pio 53 0>; + i2s1-in-sel-gpio2 = <&pio 54 0>; + status = "okay"; + }; + + bt_sco_codec:bt_sco_codec { + compatible = "linux,bt-sco"; + }; }; &auxadc { @@ -44,6 +78,12 @@ pinctrl-names = "default"; pinctrl-0 = <&i2c2_pins_a>; status = "okay"; + cs42448: cs42448@48 { + compatible = "cirrus,cs42448"; + reg = <0x48>; + clocks = <&topckgen CLK_TOP_AUD_I2S1_MCLK>; + clock-names = "mclk"; + }; }; &pio { @@ -81,6 +121,31 @@ }; }; + aud_pins_default: audiodefault { + pins_cmd_dat { + pinmux = , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + ; + drive-strength = ; + bias-pull-down; + }; + }; + spi_pins_b: spi1@0 { pins_spi { pinmux = , diff --git a/arch/arm/boot/dts/mt2701.dtsi b/arch/arm/boot/dts/mt2701.dtsi index 50a483ce5c47..f1efdc63656a 100644 --- a/arch/arm/boot/dts/mt2701.dtsi +++ b/arch/arm/boot/dts/mt2701.dtsi @@ -425,6 +425,104 @@ status = "disabled"; }; + afe: audio-controller@11220000 { + compatible = "mediatek,mt2701-audio"; + reg = <0 0x11220000 0 0x2000>, + <0 0x112a0000 0 0x20000>; + interrupts = ; + power-domains = <&scpsys MT2701_POWER_DOMAIN_IFR_MSC>; + + clocks = <&infracfg CLK_INFRA_AUDIO>, + <&topckgen CLK_TOP_AUD_MUX1_SEL>, + <&topckgen CLK_TOP_AUD_MUX2_SEL>, + <&topckgen CLK_TOP_AUD_MUX1_DIV>, + <&topckgen CLK_TOP_AUD_MUX2_DIV>, + <&topckgen CLK_TOP_AUD_48K_TIMING>, + <&topckgen CLK_TOP_AUD_44K_TIMING>, + <&topckgen CLK_TOP_AUDPLL_MUX_SEL>, + <&topckgen CLK_TOP_APLL_SEL>, + <&topckgen CLK_TOP_AUD1PLL_98M>, + <&topckgen CLK_TOP_AUD2PLL_90M>, + <&topckgen CLK_TOP_HADDS2PLL_98M>, + <&topckgen CLK_TOP_HADDS2PLL_294M>, + <&topckgen CLK_TOP_AUDPLL>, + <&topckgen CLK_TOP_AUDPLL_D4>, + <&topckgen CLK_TOP_AUDPLL_D8>, + <&topckgen CLK_TOP_AUDPLL_D16>, + <&topckgen CLK_TOP_AUDPLL_D24>, + <&topckgen CLK_TOP_AUDINTBUS_SEL>, + <&clk26m>, + <&topckgen CLK_TOP_SYSPLL1_D4>, + <&topckgen CLK_TOP_AUD_K1_SRC_SEL>, + <&topckgen CLK_TOP_AUD_K2_SRC_SEL>, + <&topckgen CLK_TOP_AUD_K3_SRC_SEL>, + <&topckgen CLK_TOP_AUD_K4_SRC_SEL>, + <&topckgen CLK_TOP_AUD_K5_SRC_SEL>, + <&topckgen CLK_TOP_AUD_K6_SRC_SEL>, + <&topckgen CLK_TOP_AUD_K1_SRC_DIV>, + <&topckgen CLK_TOP_AUD_K2_SRC_DIV>, + <&topckgen CLK_TOP_AUD_K3_SRC_DIV>, + <&topckgen CLK_TOP_AUD_K4_SRC_DIV>, + <&topckgen CLK_TOP_AUD_K5_SRC_DIV>, + <&topckgen CLK_TOP_AUD_K6_SRC_DIV>, + <&topckgen CLK_TOP_AUD_I2S1_MCLK>, + <&topckgen CLK_TOP_AUD_I2S2_MCLK>, + <&topckgen CLK_TOP_AUD_I2S3_MCLK>, + <&topckgen CLK_TOP_AUD_I2S4_MCLK>, + <&topckgen CLK_TOP_AUD_I2S5_MCLK>, + <&topckgen CLK_TOP_AUD_I2S6_MCLK>, + <&topckgen CLK_TOP_ASM_M_SEL>, + <&topckgen CLK_TOP_ASM_H_SEL>, + <&topckgen CLK_TOP_UNIVPLL2_D4>, + <&topckgen CLK_TOP_UNIVPLL2_D2>, + <&topckgen CLK_TOP_SYSPLL_D5>; + + clock-names = "infra_sys_audio_clk", + "top_audio_mux1_sel", + "top_audio_mux2_sel", + "top_audio_mux1_div", + "top_audio_mux2_div", + "top_audio_48k_timing", + "top_audio_44k_timing", + "top_audpll_mux_sel", + "top_apll_sel", + "top_aud1_pll_98M", + "top_aud2_pll_90M", + "top_hadds2_pll_98M", + "top_hadds2_pll_294M", + "top_audpll", + "top_audpll_d4", + "top_audpll_d8", + "top_audpll_d16", + "top_audpll_d24", + "top_audintbus_sel", + "clk_26m", + "top_syspll1_d4", + "top_aud_k1_src_sel", + "top_aud_k2_src_sel", + "top_aud_k3_src_sel", + "top_aud_k4_src_sel", + "top_aud_k5_src_sel", + "top_aud_k6_src_sel", + "top_aud_k1_src_div", + "top_aud_k2_src_div", + "top_aud_k3_src_div", + "top_aud_k4_src_div", + "top_aud_k5_src_div", + "top_aud_k6_src_div", + "top_aud_i2s1_mclk", + "top_aud_i2s2_mclk", + "top_aud_i2s3_mclk", + "top_aud_i2s4_mclk", + "top_aud_i2s5_mclk", + "top_aud_i2s6_mclk", + "top_asm_m_sel", + "top_asm_h_sel", + "top_univpll2_d4", + "top_univpll2_d2", + "top_syspll_d5"; + }; + mmsys: syscon@14000000 { compatible = "mediatek,mt2701-mmsys", "syscon"; reg = <0 0x14000000 0 0x1000>; -- cgit v1.2.3 From f44848b6f7ca8b8cbc3d04be3eb476b1ec531681 Mon Sep 17 00:00:00 2001 From: Vikas Manocha Date: Wed, 7 Jun 2017 13:55:25 +0200 Subject: ARM: dts: stm32: add stm32f769I & stm32f746 discovery board support Stm32f769I & stm32f746 are MCUs of stm32f7 family. Here are the major specs of the two boards: stm32f769I discovery board: - Cortex-M7 core @216MHz - 2MB mcu internal flash - 512KB internal sram - 16MB sdram memory - 64MB qspi flash memory - 4 inch wvga LCD-TFT Display stm32f746 discovery board: - Cortex-M7 core @216MHz - 1MB mcu internal flash - 320KB internal sram - 8MB sdram memory - 16MB qspi flash memory - 4.3 inch 480x272 LCD-TFT display Signed-off-by: Vikas Manocha Signed-off-by: Alexandre TORGUE --- arch/arm/boot/dts/Makefile | 2 + arch/arm/boot/dts/stm32f746-disco.dts | 74 +++++++++++++++++++++++++++++++++++ arch/arm/boot/dts/stm32f746.dtsi | 13 ++++++ arch/arm/boot/dts/stm32f769-disco.dts | 74 +++++++++++++++++++++++++++++++++++ 4 files changed, 163 insertions(+) create mode 100644 arch/arm/boot/dts/stm32f746-disco.dts create mode 100644 arch/arm/boot/dts/stm32f769-disco.dts (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 9c5e1d944d1c..828165479ab0 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -790,6 +790,8 @@ dtb-$(CONFIG_ARCH_STI) += \ dtb-$(CONFIG_ARCH_STM32)+= \ stm32f429-disco.dtb \ stm32f469-disco.dtb \ + stm32f746-disco.dtb \ + stm32f769-disco.dtb \ stm32429i-eval.dtb \ stm32746g-eval.dtb \ stm32h743i-eval.dtb diff --git a/arch/arm/boot/dts/stm32f746-disco.dts b/arch/arm/boot/dts/stm32f746-disco.dts new file mode 100644 index 000000000000..18f656074437 --- /dev/null +++ b/arch/arm/boot/dts/stm32f746-disco.dts @@ -0,0 +1,74 @@ +/* + * Copyright 2017 - Vikas MANOCHA + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "stm32f746.dtsi" +#include + +/ { + model = "STMicroelectronics STM32F746-DISCO board"; + compatible = "st,stm32f746-disco", "st,stm32f746"; + + chosen { + bootargs = "root=/dev/ram"; + stdout-path = "serial0:115200n8"; + }; + + memory { + reg = <0xC0000000 0x800000>; + }; + + aliases { + serial0 = &usart1; + }; + +}; + +&clk_hse { + clock-frequency = <25000000>; +}; + +&usart1 { + pinctrl-0 = <&usart1_pins_b>; + pinctrl-names = "default"; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/stm32f746.dtsi b/arch/arm/boot/dts/stm32f746.dtsi index c2765ce12e2e..449f727c3476 100644 --- a/arch/arm/boot/dts/stm32f746.dtsi +++ b/arch/arm/boot/dts/stm32f746.dtsi @@ -326,6 +326,19 @@ bias-disable; }; }; + + usart1_pins_b: usart1@1 { + pins1 { + pinmux = ; + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins2 { + pinmux = ; + bias-disable; + }; + }; }; crc: crc@40023000 { diff --git a/arch/arm/boot/dts/stm32f769-disco.dts b/arch/arm/boot/dts/stm32f769-disco.dts new file mode 100644 index 000000000000..166728aeb166 --- /dev/null +++ b/arch/arm/boot/dts/stm32f769-disco.dts @@ -0,0 +1,74 @@ +/* + * Copyright 2017 - Vikas MANOCHA + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "stm32f746.dtsi" +#include + +/ { + model = "STMicroelectronics STM32F769-DISCO board"; + compatible = "st,stm32f769-disco", "st,stm32f7"; + + chosen { + bootargs = "root=/dev/ram"; + stdout-path = "serial0:115200n8"; + }; + + memory { + reg = <0xC0000000 0x1000000>; + }; + + aliases { + serial0 = &usart1; + }; + +}; + +&clk_hse { + clock-frequency = <25000000>; +}; + +&usart1 { + pinctrl-0 = <&usart1_pins_a>; + pinctrl-names = "default"; + status = "okay"; +}; -- cgit v1.2.3 From bcb49099cfb464cdfeb0d4c04a2c53ae823dea0f Mon Sep 17 00:00:00 2001 From: Yannick Fertre Date: Wed, 7 Jun 2017 14:58:10 +0200 Subject: ARM: dts: stm32: Add ltdc support on stm32f429 MCU Add LTDC (Lcd-tft Display Controller) support. Signed-off-by: Yannick Fertre Signed-off-by: Alexandre TORGUE --- arch/arm/boot/dts/stm32f429.dtsi | 46 +++++++++++++++++++++++++++++++++++++++- 1 file changed, 45 insertions(+), 1 deletion(-) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/stm32f429.dtsi b/arch/arm/boot/dts/stm32f429.dtsi index b2a2b5c38caa..a7b4b94dd66c 100644 --- a/arch/arm/boot/dts/stm32f429.dtsi +++ b/arch/arm/boot/dts/stm32f429.dtsi @@ -549,7 +549,17 @@ reg = <0x40007000 0x400>; }; - pin-controller { + ltdc: display-controller@40016800 { + compatible = "st,stm32-ltdc"; + reg = <0x40016800 0x200>; + interrupts = <88>, <89>; + resets = <&rcc STM32F4_APB2_RESET(LTDC)>; + clocks = <&rcc 1 CLK_LCD>; + clock-names = "lcd"; + status = "disabled"; + }; + + pinctrl: pin-controller { #address-cells = <1>; #size-cells = <1>; compatible = "st,stm32f429-pinctrl"; @@ -764,6 +774,40 @@ slew-rate = <3>; }; }; + + ltdc_pins: ltdc@0 { + pins { + pinmux = , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + ; + slew-rate = <2>; + }; + }; }; rcc: rcc@40023810 { -- cgit v1.2.3 From 85d95f785500786a707c50804a86615205c1b941 Mon Sep 17 00:00:00 2001 From: Yannick Fertre Date: Wed, 7 Jun 2017 15:20:53 +0200 Subject: ARM: dts: stm32: Enable ltdc & simple panel on stm32f429-Eval board Enable ltdc & enable am-480272h3tmqw-t01h panel. Signed-off-by: Yannick Fertre Signed-off-by: Alexandre TORGUE --- arch/arm/boot/dts/stm32429i-eval.dts | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/stm32429i-eval.dts b/arch/arm/boot/dts/stm32429i-eval.dts index b6331146aa02..a6a300b5799a 100644 --- a/arch/arm/boot/dts/stm32429i-eval.dts +++ b/arch/arm/boot/dts/stm32429i-eval.dts @@ -124,6 +124,16 @@ clocks = <&rcc 0 STM32F4_AHB1_CLOCK(OTGHSULPI)>; clock-names = "main_clk"; }; + + panel_rgb: panel-rgb { + compatible = "ampire,am-480272h3tmqw-t01h"; + status = "okay"; + port { + panel_in_rgb: endpoint { + remote-endpoint = <<dc_out_rgb>; + }; + }; + }; }; &adc { @@ -147,6 +157,19 @@ status = "okay"; }; +<dc { + status = "okay"; + pinctrl-0 = <<dc_pins>; + pinctrl-names = "default"; + dma-ranges; + + port { + ltdc_out_rgb: endpoint { + remote-endpoint = <&panel_in_rgb>; + }; + }; +}; + &mac { status = "okay"; pinctrl-0 = <ðernet_mii>; -- cgit v1.2.3 From e1679f09210fc2ed762747588c49f3b8909b9067 Mon Sep 17 00:00:00 2001 From: Antoine Tenart Date: Thu, 1 Jun 2017 21:39:04 +0200 Subject: ARM: sun5i: add a cryptographic engine node Add a node for the cryptographic engine that can be found on sun5i SoCs. This cryptographic engine is compatible with the Allwinner cryptographic accelerator driver. Signed-off-by: Antoine Tenart Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun5i.dtsi | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/sun5i.dtsi b/arch/arm/boot/dts/sun5i.dtsi index 0e29f1d98a9e..98cc00341b00 100644 --- a/arch/arm/boot/dts/sun5i.dtsi +++ b/arch/arm/boot/dts/sun5i.dtsi @@ -356,6 +356,15 @@ status = "disabled"; }; + crypto: crypto-engine@01c15000 { + compatible = "allwinner,sun5i-a13-crypto", + "allwinner,sun4i-a10-crypto"; + reg = <0x01c15000 0x1000>; + interrupts = <54>; + clocks = <&ccu CLK_AHB_SS>, <&ccu CLK_SS>; + clock-names = "ahb", "mod"; + }; + spi2: spi@01c17000 { compatible = "allwinner,sun4i-a10-spi"; reg = <0x01c17000 0x1000>; -- cgit v1.2.3 From 9bea19aac3226872af247f4d37d673fd15431941 Mon Sep 17 00:00:00 2001 From: Antoine Tenart Date: Thu, 1 Jun 2017 21:39:05 +0200 Subject: ARM: dts: sunxi: add SoC specific compatibles for the crypto nodes Add SoC specific compatibles for all sunXi crypto nodes, in addition to the one already used (allwinner,sun4i-a10-crypto). Signed-off-by: Antoine Tenart Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun6i-a31.dtsi | 3 ++- arch/arm/boot/dts/sun7i-a20.dtsi | 3 ++- 2 files changed, 4 insertions(+), 2 deletions(-) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi index d0cede5aaeb5..aebc3f9dc7b6 100644 --- a/arch/arm/boot/dts/sun6i-a31.dtsi +++ b/arch/arm/boot/dts/sun6i-a31.dtsi @@ -816,7 +816,8 @@ }; crypto: crypto-engine@01c15000 { - compatible = "allwinner,sun4i-a10-crypto"; + compatible = "allwinner,sun6i-a31-crypto", + "allwinner,sun4i-a10-crypto"; reg = <0x01c15000 0x1000>; interrupts = ; clocks = <&ccu CLK_AHB1_SS>, <&ccu CLK_SS>; diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi index c03b59aaec82..96bee776e145 100644 --- a/arch/arm/boot/dts/sun7i-a20.dtsi +++ b/arch/arm/boot/dts/sun7i-a20.dtsi @@ -1019,7 +1019,8 @@ }; crypto: crypto-engine@01c15000 { - compatible = "allwinner,sun4i-a10-crypto"; + compatible = "allwinner,sun7i-a20-crypto", + "allwinner,sun4i-a10-crypto"; reg = <0x01c15000 0x1000>; interrupts = ; clocks = <&ahb_gates 5>, <&ss_clk>; -- cgit v1.2.3 From 21b29920933086b34f4a58692a079e9914115019 Mon Sep 17 00:00:00 2001 From: Icenowy Zheng Date: Wed, 24 May 2017 19:17:23 +0800 Subject: ARM: sun8i: v3s: add device nodes for DE2 display pipeline Allwinner V3s SoC features a "Display Engine 2.0" with only one mixer and only one TCON connected to this mixer, which have RGB LCD output. Add device nodes for this display pipeline. Signed-off-by: Icenowy Zheng Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun8i-v3s.dtsi | 83 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 83 insertions(+) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/sun8i-v3s.dtsi b/arch/arm/boot/dts/sun8i-v3s.dtsi index a49ebef53c91..3a06dc5b3746 100644 --- a/arch/arm/boot/dts/sun8i-v3s.dtsi +++ b/arch/arm/boot/dts/sun8i-v3s.dtsi @@ -61,6 +61,12 @@ }; }; + de: display-engine { + compatible = "allwinner,sun8i-v3s-display-engine"; + allwinner,pipelines = <&mixer0>; + status = "disabled"; + }; + timer { compatible = "arm,armv7-timer"; interrupts = , @@ -95,6 +101,83 @@ #size-cells = <1>; ranges; + display_clocks: clock@1000000 { + compatible = "allwinner,sun8i-v3s-de2-clk"; + reg = <0x01000000 0x100000>; + clocks = <&ccu CLK_DE>, + <&ccu CLK_BUS_DE>; + clock-names = "mod", + "bus"; + resets = <&ccu RST_BUS_DE>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + mixer0: mixer@1100000 { + compatible = "allwinner,sun8i-v3s-de2-mixer"; + reg = <0x01100000 0x100000>; + clocks = <&display_clocks 0>, + <&display_clocks 6>; + clock-names = "bus", + "mod"; + resets = <&display_clocks 0>; + assigned-clocks = <&display_clocks 6>; + assigned-clock-rates = <150000000>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + mixer0_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + mixer0_out_tcon0: endpoint@0 { + reg = <0>; + remote-endpoint = <&tcon0_in_mixer0>; + }; + }; + }; + }; + + tcon0: lcd-controller@1c0c000 { + compatible = "allwinner,sun8i-v3s-tcon"; + reg = <0x01c0c000 0x1000>; + interrupts = ; + clocks = <&ccu CLK_BUS_TCON0>, + <&ccu CLK_TCON0>; + clock-names = "ahb", + "tcon-ch0"; + clock-output-names = "tcon-pixel-clock"; + resets = <&ccu RST_BUS_TCON0>; + reset-names = "lcd"; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + tcon0_in: port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + tcon0_in_mixer0: endpoint@0 { + reg = <0>; + remote-endpoint = <&mixer0_out_tcon0>; + }; + }; + + tcon0_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + }; + }; + + mmc0: mmc@01c0f000 { compatible = "allwinner,sun7i-a20-mmc"; reg = <0x01c0f000 0x1000>; -- cgit v1.2.3 From e89960c5ae51eac6a663be20dcfc2a58de1416f5 Mon Sep 17 00:00:00 2001 From: Yannick Fertre Date: Thu, 6 Apr 2017 14:19:00 +0200 Subject: ARM: dts: stm32: Add watchdog support for STM32F429 SoC Add watchdog into DT for stm32f429 family. Signed-off-by: Yannick FERTRE Signed-off-by: Alexandre TORGUE --- arch/arm/boot/dts/stm32f429.dtsi | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/stm32f429.dtsi b/arch/arm/boot/dts/stm32f429.dtsi index a7b4b94dd66c..936db6b60f9d 100644 --- a/arch/arm/boot/dts/stm32f429.dtsi +++ b/arch/arm/boot/dts/stm32f429.dtsi @@ -65,7 +65,7 @@ clock-frequency = <32768>; }; - clk-lsi { + clk_lsi: clk-lsi { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <32000>; @@ -307,6 +307,13 @@ status = "disabled"; }; + iwdg: watchdog@40003000 { + compatible = "st,stm32-iwdg"; + reg = <0x40003000 0x400>; + clocks = <&clk_lsi>; + status = "disabled"; + }; + usart2: serial@40004400 { compatible = "st,stm32-usart", "st,stm32-uart"; reg = <0x40004400 0x400>; -- cgit v1.2.3 From 7bffbd2d4273d5e8108cac3265d50d8e31f9d6a3 Mon Sep 17 00:00:00 2001 From: Yannick Fertre Date: Wed, 7 Jun 2017 15:39:40 +0200 Subject: ARM: dts: stm32: Add watchdog support for STM32F429 eval board This patch adds watchdog support for STM32x9I-Eval board. Signed-off-by: Yannick Fertre Signed-off-by: Alexandre TORGUE --- arch/arm/boot/dts/stm32429i-eval.dts | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/stm32429i-eval.dts b/arch/arm/boot/dts/stm32429i-eval.dts index a6a300b5799a..2e78e4e4addd 100644 --- a/arch/arm/boot/dts/stm32429i-eval.dts +++ b/arch/arm/boot/dts/stm32429i-eval.dts @@ -157,6 +157,11 @@ status = "okay"; }; +&iwdg { + status = "okay"; + timeout-sec = <32>; +}; + <dc { status = "okay"; pinctrl-0 = <<dc_pins>; -- cgit v1.2.3 From 5489d5dbb497ca3c6301f33792bcca1c064de98e Mon Sep 17 00:00:00 2001 From: Alexandre TORGUE Date: Wed, 7 Jun 2017 16:41:36 +0200 Subject: ARM: dts: stm32: Set gpio controller as interrupt controller on F4 and F7 This patch set each gpio controller as a interrupt controller. User who wants to use gpio as interrupt will have choice to use either "gpiolib" interface or "common" interrupt interface. Acked-by: Linus Walleij Signed-off-by: Alexandre TORGUE --- arch/arm/boot/dts/stm32f429.dtsi | 22 ++++++++++++++++++++++ arch/arm/boot/dts/stm32f746.dtsi | 22 ++++++++++++++++++++++ 2 files changed, 44 insertions(+) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/stm32f429.dtsi b/arch/arm/boot/dts/stm32f429.dtsi index 936db6b60f9d..53f83511c717 100644 --- a/arch/arm/boot/dts/stm32f429.dtsi +++ b/arch/arm/boot/dts/stm32f429.dtsi @@ -578,6 +578,8 @@ gpioa: gpio@40020000 { gpio-controller; #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; reg = <0x0 0x400>; clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOA)>; st,bank-name = "GPIOA"; @@ -586,6 +588,8 @@ gpiob: gpio@40020400 { gpio-controller; #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; reg = <0x400 0x400>; clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOB)>; st,bank-name = "GPIOB"; @@ -594,6 +598,8 @@ gpioc: gpio@40020800 { gpio-controller; #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; reg = <0x800 0x400>; clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOC)>; st,bank-name = "GPIOC"; @@ -602,6 +608,8 @@ gpiod: gpio@40020c00 { gpio-controller; #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; reg = <0xc00 0x400>; clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOD)>; st,bank-name = "GPIOD"; @@ -610,6 +618,8 @@ gpioe: gpio@40021000 { gpio-controller; #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; reg = <0x1000 0x400>; clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOE)>; st,bank-name = "GPIOE"; @@ -618,6 +628,8 @@ gpiof: gpio@40021400 { gpio-controller; #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; reg = <0x1400 0x400>; clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOF)>; st,bank-name = "GPIOF"; @@ -626,6 +638,8 @@ gpiog: gpio@40021800 { gpio-controller; #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; reg = <0x1800 0x400>; clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOG)>; st,bank-name = "GPIOG"; @@ -634,6 +648,8 @@ gpioh: gpio@40021c00 { gpio-controller; #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; reg = <0x1c00 0x400>; clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOH)>; st,bank-name = "GPIOH"; @@ -642,6 +658,8 @@ gpioi: gpio@40022000 { gpio-controller; #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; reg = <0x2000 0x400>; clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOI)>; st,bank-name = "GPIOI"; @@ -650,6 +668,8 @@ gpioj: gpio@40022400 { gpio-controller; #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; reg = <0x2400 0x400>; clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOJ)>; st,bank-name = "GPIOJ"; @@ -658,6 +678,8 @@ gpiok: gpio@40022800 { gpio-controller; #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; reg = <0x2800 0x400>; clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOK)>; st,bank-name = "GPIOK"; diff --git a/arch/arm/boot/dts/stm32f746.dtsi b/arch/arm/boot/dts/stm32f746.dtsi index 449f727c3476..d6b1b56f340c 100644 --- a/arch/arm/boot/dts/stm32f746.dtsi +++ b/arch/arm/boot/dts/stm32f746.dtsi @@ -229,6 +229,8 @@ gpioa: gpio@40020000 { gpio-controller; #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; reg = <0x0 0x400>; clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOA)>; st,bank-name = "GPIOA"; @@ -237,6 +239,8 @@ gpiob: gpio@40020400 { gpio-controller; #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; reg = <0x400 0x400>; clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOB)>; st,bank-name = "GPIOB"; @@ -245,6 +249,8 @@ gpioc: gpio@40020800 { gpio-controller; #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; reg = <0x800 0x400>; clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOC)>; st,bank-name = "GPIOC"; @@ -253,6 +259,8 @@ gpiod: gpio@40020c00 { gpio-controller; #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; reg = <0xc00 0x400>; clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOD)>; st,bank-name = "GPIOD"; @@ -261,6 +269,8 @@ gpioe: gpio@40021000 { gpio-controller; #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; reg = <0x1000 0x400>; clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOE)>; st,bank-name = "GPIOE"; @@ -269,6 +279,8 @@ gpiof: gpio@40021400 { gpio-controller; #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; reg = <0x1400 0x400>; clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOF)>; st,bank-name = "GPIOF"; @@ -277,6 +289,8 @@ gpiog: gpio@40021800 { gpio-controller; #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; reg = <0x1800 0x400>; clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOG)>; st,bank-name = "GPIOG"; @@ -285,6 +299,8 @@ gpioh: gpio@40021c00 { gpio-controller; #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; reg = <0x1c00 0x400>; clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOH)>; st,bank-name = "GPIOH"; @@ -293,6 +309,8 @@ gpioi: gpio@40022000 { gpio-controller; #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; reg = <0x2000 0x400>; clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOI)>; st,bank-name = "GPIOI"; @@ -301,6 +319,8 @@ gpioj: gpio@40022400 { gpio-controller; #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; reg = <0x2400 0x400>; clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOJ)>; st,bank-name = "GPIOJ"; @@ -309,6 +329,8 @@ gpiok: gpio@40022800 { gpio-controller; #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; reg = <0x2800 0x400>; clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOK)>; st,bank-name = "GPIOK"; -- cgit v1.2.3 From aa8f42f7a10f749f8226ce75e770b36caca53cc4 Mon Sep 17 00:00:00 2001 From: Lionel Debieve Date: Wed, 7 Jun 2017 16:50:21 +0200 Subject: ARM: dts: stm32: Add missing reset-cells node in stm32f746 rcc node must include reset-cells node. Signed-off-by: Lionel Debieve Signed-off-by: Alexandre TORGUE --- arch/arm/boot/dts/stm32f746.dtsi | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/stm32f746.dtsi b/arch/arm/boot/dts/stm32f746.dtsi index d6b1b56f340c..4506eb97a4ab 100644 --- a/arch/arm/boot/dts/stm32f746.dtsi +++ b/arch/arm/boot/dts/stm32f746.dtsi @@ -371,6 +371,7 @@ }; rcc: rcc@40023800 { + #reset-cells = <1>; #clock-cells = <2>; compatible = "st,stm32f746-rcc", "st,stm32-rcc"; reg = <0x40023800 0x400>; -- cgit v1.2.3 From ba7f0df0895a62fc021dcbc9a59ec75b84c039b8 Mon Sep 17 00:00:00 2001 From: Hugues Fruchet Date: Fri, 5 May 2017 17:31:00 +0200 Subject: ARM: dts: stm32: Enable DCMI support on STM32F429 MCU Enable DCMI camera interface on STM32F429 MCU. Signed-off-by: Hugues Fruchet Signed-off-by: Alexandre TORGUE --- arch/arm/boot/dts/stm32f429.dtsi | 37 +++++++++++++++++++++++++++++++++++++ 1 file changed, 37 insertions(+) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/stm32f429.dtsi b/arch/arm/boot/dts/stm32f429.dtsi index 53f83511c717..9f2138c8a8cc 100644 --- a/arch/arm/boot/dts/stm32f429.dtsi +++ b/arch/arm/boot/dts/stm32f429.dtsi @@ -837,6 +837,29 @@ slew-rate = <2>; }; }; + + dcmi_pins: dcmi@0 { + pins { + pinmux = , + , + , + , + , + , + , + , + , + , + , + , + , + , + ; + bias-disable; + drive-push-pull; + slew-rate = <3>; + }; + }; }; rcc: rcc@40023810 { @@ -915,6 +938,20 @@ status = "disabled"; }; + dcmi: dcmi@50050000 { + compatible = "st,stm32-dcmi"; + reg = <0x50050000 0x400>; + interrupts = <78>; + resets = <&rcc STM32F4_AHB2_RESET(DCMI)>; + clocks = <&rcc 0 STM32F4_AHB2_CLOCK(DCMI)>; + clock-names = "mclk"; + pinctrl-names = "default"; + pinctrl-0 = <&dcmi_pins>; + dmas = <&dma2 1 1 0x414 0x3>; + dma-names = "tx"; + status = "disabled"; + }; + rng: rng@50060800 { compatible = "st,stm32-rng"; reg = <0x50060800 0x400>; -- cgit v1.2.3 From e8e16b7b29e916704c37e4fbbb9b6436b0cca51a Mon Sep 17 00:00:00 2001 From: Hugues Fruchet Date: Fri, 5 May 2017 17:31:00 +0200 Subject: ARM: dts: stm32: Enable DCMI camera interface on STM32F429-EVAL board Enable DCMI camera interface on STM32F429-EVAL board. Signed-off-by: Hugues Fruchet Signed-off-by: Alexandre TORGUE --- arch/arm/boot/dts/stm32429i-eval.dts | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/stm32429i-eval.dts b/arch/arm/boot/dts/stm32429i-eval.dts index 2e78e4e4addd..60c2cb68d109 100644 --- a/arch/arm/boot/dts/stm32429i-eval.dts +++ b/arch/arm/boot/dts/stm32429i-eval.dts @@ -151,6 +151,15 @@ clock-frequency = <25000000>; }; +&dcmi { + status = "okay"; + + port { + dcmi_0: endpoint { + }; + }; +}; + &i2c1 { pinctrl-0 = <&i2c1_pins>; pinctrl-names = "default"; -- cgit v1.2.3 From c04b2e72af8d379b4d85f28e922bb1515d565891 Mon Sep 17 00:00:00 2001 From: Hugues Fruchet Date: Wed, 7 Jun 2017 17:39:11 +0200 Subject: ARM: dts: stm32: Enable STMPE1600 gpio expander of STM32F429-EVAL board Enable STMPE1600 gpio expander of STM32F429-EVAL board. Signed-off-by: Hugues Fruchet Signed-off-by: Alexandre TORGUE --- arch/arm/boot/dts/stm32429i-eval.dts | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/stm32429i-eval.dts b/arch/arm/boot/dts/stm32429i-eval.dts index 60c2cb68d109..bc50f6be4d6a 100644 --- a/arch/arm/boot/dts/stm32429i-eval.dts +++ b/arch/arm/boot/dts/stm32429i-eval.dts @@ -164,6 +164,23 @@ pinctrl-0 = <&i2c1_pins>; pinctrl-names = "default"; status = "okay"; + + stmpe1600: stmpe1600@42 { + compatible = "st,stmpe1600"; + reg = <0x42>; + irq-gpio = <&gpioi 8 0>; + irq-trigger = <3>; + interrupts = <8 3>; + interrupt-parent = <&exti>; + interrupt-controller; + wakeup-source; + + stmpegpio: stmpe_gpio { + compatible = "st,stmpe-gpio"; + gpio-controller; + #gpio-cells = <2>; + }; + }; }; &iwdg { -- cgit v1.2.3 From 13dd385740627d5119c7918d46cecbe72e3b21c5 Mon Sep 17 00:00:00 2001 From: Hugues Fruchet Date: Fri, 5 May 2017 17:31:00 +0200 Subject: ARM: dts: stm32: Enable OV2640 camera support of STM32F429-EVAL board Enable OV2640 camera support of STM32F429-EVAL board. Signed-off-by: Hugues Fruchet Signed-off-by: Alexandre TORGUE --- arch/arm/boot/dts/stm32429i-eval.dts | 30 ++++++++++++++++++++++++++++++ 1 file changed, 30 insertions(+) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/stm32429i-eval.dts b/arch/arm/boot/dts/stm32429i-eval.dts index bc50f6be4d6a..28f4a51a65e7 100644 --- a/arch/arm/boot/dts/stm32429i-eval.dts +++ b/arch/arm/boot/dts/stm32429i-eval.dts @@ -48,6 +48,7 @@ /dts-v1/; #include "stm32f429.dtsi" #include +#include / { model = "STMicroelectronics STM32429i-EVAL board"; @@ -66,6 +67,14 @@ serial0 = &usart1; }; + clocks { + clk_ext_camera: clk-ext-camera { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <24000000>; + }; + }; + soc { dma-ranges = <0xc0000000 0x0 0x10000000>; }; @@ -156,6 +165,11 @@ port { dcmi_0: endpoint { + remote-endpoint = <&ov2640_0>; + bus-width = <8>; + hsync-active = <0>; + vsync-active = <0>; + pclk-sample = <1>; }; }; }; @@ -165,6 +179,22 @@ pinctrl-names = "default"; status = "okay"; + ov2640: camera@30 { + compatible = "ovti,ov2640"; + reg = <0x30>; + resetb-gpios = <&stmpegpio 2 GPIO_ACTIVE_HIGH>; + pwdn-gpios = <&stmpegpio 0 GPIO_ACTIVE_LOW>; + clocks = <&clk_ext_camera>; + clock-names = "xvclk"; + status = "okay"; + + port { + ov2640_0: endpoint { + remote-endpoint = <&dcmi_0>; + }; + }; + }; + stmpe1600: stmpe1600@42 { compatible = "st,stmpe1600"; reg = <0x42>; -- cgit v1.2.3 From a68883f1e2fc03758feccf0b38ccb2dc06b4eec4 Mon Sep 17 00:00:00 2001 From: Cosar Dindar Date: Mon, 22 May 2017 16:34:00 +0200 Subject: ARM: dts: stm32: Add CRC support to stm32f429 Add CRC32 Crypto support to stm32f429. Signed-off-by: Cosar Dindar Signed-off-by: Alexandre TORGUE --- arch/arm/boot/dts/stm32f429.dtsi | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/stm32f429.dtsi b/arch/arm/boot/dts/stm32f429.dtsi index 9f2138c8a8cc..a8113dc879cf 100644 --- a/arch/arm/boot/dts/stm32f429.dtsi +++ b/arch/arm/boot/dts/stm32f429.dtsi @@ -862,6 +862,13 @@ }; }; + crc: crc@40023000 { + compatible = "st,stm32f4-crc"; + reg = <0x40023000 0x400>; + clocks = <&rcc 0 STM32F4_AHB1_CLOCK(CRC)>; + status = "disabled"; + }; + rcc: rcc@40023810 { #reset-cells = <1>; #clock-cells = <2>; -- cgit v1.2.3 From 58518a0547a04f804531aeb59a5d92fbd1875ca7 Mon Sep 17 00:00:00 2001 From: Cosar Dindar Date: Mon, 22 May 2017 16:34:00 +0200 Subject: ARM: dts: stm32: enable CRC32 on stm32429-disco board Enable the CRC32 crypto on stm32429-disco board. Signed-off-by: Cosar Dindar Signed-off-by: Alexandre TORGUE --- arch/arm/boot/dts/stm32f429-disco.dts | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/stm32f429-disco.dts b/arch/arm/boot/dts/stm32f429-disco.dts index 191fa50e34eb..ae47cde7952f 100644 --- a/arch/arm/boot/dts/stm32f429-disco.dts +++ b/arch/arm/boot/dts/stm32f429-disco.dts @@ -102,6 +102,10 @@ clock-frequency = <8000000>; }; +&crc { + status = "okay"; +}; + &rtc { assigned-clocks = <&rcc 1 CLK_RTC>; assigned-clock-parents = <&rcc 1 CLK_LSI>; -- cgit v1.2.3 From d6998234935e72521e26a8b7b8a85956cbfa3c7c Mon Sep 17 00:00:00 2001 From: Cosar Dindar Date: Mon, 22 May 2017 16:35:00 +0200 Subject: ARM: dts: stm32: enable CRC32 on stm32429i-eval board Enable the CRC32 crypto on stm32429i-eval board. Signed-off-by: Cosar Dindar Signed-off-by: Alexandre TORGUE --- arch/arm/boot/dts/stm32429i-eval.dts | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/stm32429i-eval.dts b/arch/arm/boot/dts/stm32429i-eval.dts index 28f4a51a65e7..dcda0bbefe5b 100644 --- a/arch/arm/boot/dts/stm32429i-eval.dts +++ b/arch/arm/boot/dts/stm32429i-eval.dts @@ -160,6 +160,10 @@ clock-frequency = <25000000>; }; +&crc { + status = "okay"; +}; + &dcmi { status = "okay"; -- cgit v1.2.3 From 6ff0b90d746146f8270207551c0edbfe80986846 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Fri, 2 Jun 2017 20:13:45 +0200 Subject: ARM: dts: exynos: Use human-friendly symbols for interrupt flags in board sources Replace hard-coded values of interrupt flags with respective macros from header to increase code readability. Suggested-by: Marek Szyprowski Signed-off-by: Krzysztof Kozlowski --- arch/arm/boot/dts/exynos3250-monk.dts | 6 +++--- arch/arm/boot/dts/exynos3250-rinato.dts | 6 +++--- arch/arm/boot/dts/exynos4210-origen.dts | 2 +- arch/arm/boot/dts/exynos4210-trats.dts | 4 ++-- arch/arm/boot/dts/exynos4412-odroid-common.dtsi | 6 +++--- arch/arm/boot/dts/exynos4412-odroidx.dts | 2 +- arch/arm/boot/dts/exynos4412-trats2.dts | 8 ++++---- arch/arm/boot/dts/exynos5420-peach-pit.dts | 4 ++-- arch/arm/boot/dts/exynos5422-odroidxu3-audio.dtsi | 2 +- arch/arm/boot/dts/exynos5800-peach-pi.dts | 4 ++-- 10 files changed, 22 insertions(+), 22 deletions(-) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/exynos3250-monk.dts b/arch/arm/boot/dts/exynos3250-monk.dts index cccfe4b791d1..accee81da266 100644 --- a/arch/arm/boot/dts/exynos3250-monk.dts +++ b/arch/arm/boot/dts/exynos3250-monk.dts @@ -67,7 +67,7 @@ max77836: subpmic@25 { compatible = "maxim,max77836"; interrupt-parent = <&gpx1>; - interrupts = <5 0>; + interrupts = <5 IRQ_TYPE_NONE>; reg = <0x25>; wakeup-source; @@ -191,7 +191,7 @@ s2mps14_pmic@66 { compatible = "samsung,s2mps14-pmic"; interrupt-parent = <&gpx0>; - interrupts = <7 0>; + interrupts = <7 IRQ_TYPE_NONE>; reg = <0x66>; wakeup-source; @@ -414,7 +414,7 @@ fuelgauge@36 { compatible = "maxim,max77836-battery"; interrupt-parent = <&gpx1>; - interrupts = <2 8>; + interrupts = <2 IRQ_TYPE_LEVEL_LOW>; reg = <0x36>; }; }; diff --git a/arch/arm/boot/dts/exynos3250-rinato.dts b/arch/arm/boot/dts/exynos3250-rinato.dts index c9f191ca7b9c..118235b72e90 100644 --- a/arch/arm/boot/dts/exynos3250-rinato.dts +++ b/arch/arm/boot/dts/exynos3250-rinato.dts @@ -58,7 +58,7 @@ max77836: subpmic@25 { compatible = "maxim,max77836"; interrupt-parent = <&gpx1>; - interrupts = <5 0>; + interrupts = <5 IRQ_TYPE_NONE>; reg = <0x25>; wakeup-source; @@ -295,7 +295,7 @@ s2mps14_pmic@66 { compatible = "samsung,s2mps14-pmic"; interrupt-parent = <&gpx0>; - interrupts = <7 0>; + interrupts = <7 IRQ_TYPE_NONE>; reg = <0x66>; wakeup-source; @@ -626,7 +626,7 @@ fuelgauge@36 { compatible = "maxim,max77836-battery"; interrupt-parent = <&gpx1>; - interrupts = <2 8>; + interrupts = <2 IRQ_TYPE_LEVEL_LOW>; reg = <0x36>; }; }; diff --git a/arch/arm/boot/dts/exynos4210-origen.dts b/arch/arm/boot/dts/exynos4210-origen.dts index 312650e2450f..084fcc5574ef 100644 --- a/arch/arm/boot/dts/exynos4210-origen.dts +++ b/arch/arm/boot/dts/exynos4210-origen.dts @@ -151,7 +151,7 @@ compatible = "maxim,max8997-pmic"; reg = <0x66>; interrupt-parent = <&gpx0>; - interrupts = <4 0>, <3 0>; + interrupts = <4 IRQ_TYPE_NONE>, <3 IRQ_TYPE_NONE>; max8997,pmic-buck1-dvs-voltage = <1350000>; max8997,pmic-buck2-dvs-voltage = <1100000>; diff --git a/arch/arm/boot/dts/exynos4210-trats.dts b/arch/arm/boot/dts/exynos4210-trats.dts index 1743ca850070..645feffb9239 100644 --- a/arch/arm/boot/dts/exynos4210-trats.dts +++ b/arch/arm/boot/dts/exynos4210-trats.dts @@ -281,7 +281,7 @@ compatible = "melfas,mms114"; reg = <0x48>; interrupt-parent = <&gpx0>; - interrupts = <4 2>; + interrupts = <4 IRQ_TYPE_EDGE_FALLING>; x-size = <720>; y-size = <1280>; avdd-supply = <&tsp_reg>; @@ -302,7 +302,7 @@ reg = <0x66>; interrupt-parent = <&gpx0>; - interrupts = <7 0>; + interrupts = <7 IRQ_TYPE_NONE>; max8997,pmic-buck1-uses-gpio-dvs; max8997,pmic-buck2-uses-gpio-dvs; diff --git a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi index 0f1ff792fe44..219d587c5a85 100644 --- a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi +++ b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi @@ -32,7 +32,7 @@ power_key { interrupt-parent = <&gpx1>; - interrupts = <3 0>; + interrupts = <3 IRQ_TYPE_NONE>; gpios = <&gpx1 3 GPIO_ACTIVE_LOW>; linux,code = ; label = "power key"; @@ -266,7 +266,7 @@ max77686: pmic@09 { compatible = "maxim,max77686"; interrupt-parent = <&gpx3>; - interrupts = <2 0>; + interrupts = <2 IRQ_TYPE_NONE>; pinctrl-names = "default"; pinctrl-0 = <&max77686_irq>; reg = <0x09>; @@ -484,7 +484,7 @@ compatible = "maxim,max98090"; reg = <0x10>; interrupt-parent = <&gpx0>; - interrupts = <0 0>; + interrupts = <0 IRQ_TYPE_NONE>; clocks = <&i2s0 CLK_I2S_CDCLK>; clock-names = "mclk"; #sound-dai-cells = <0>; diff --git a/arch/arm/boot/dts/exynos4412-odroidx.dts b/arch/arm/boot/dts/exynos4412-odroidx.dts index 46b931eec228..97882267ef09 100644 --- a/arch/arm/boot/dts/exynos4412-odroidx.dts +++ b/arch/arm/boot/dts/exynos4412-odroidx.dts @@ -44,7 +44,7 @@ home_key { interrupt-parent = <&gpx2>; - interrupts = <2 0>; + interrupts = <2 IRQ_TYPE_NONE>; gpios = <&gpx2 2 GPIO_ACTIVE_HIGH>; linux,code = ; label = "home key"; diff --git a/arch/arm/boot/dts/exynos4412-trats2.dts b/arch/arm/boot/dts/exynos4412-trats2.dts index 82221a00444d..35e9b94b86b8 100644 --- a/arch/arm/boot/dts/exynos4412-trats2.dts +++ b/arch/arm/boot/dts/exynos4412-trats2.dts @@ -144,7 +144,7 @@ max77693@66 { compatible = "maxim,max77693"; interrupt-parent = <&gpx1>; - interrupts = <5 2>; + interrupts = <5 IRQ_TYPE_EDGE_FALLING>; reg = <0x66>; regulators { @@ -224,7 +224,7 @@ compatible = "capella,cm36651"; reg = <0x18>; interrupt-parent = <&gpx0>; - interrupts = <2 2>; + interrupts = <2 IRQ_TYPE_EDGE_FALLING>; vled-supply = <&ps_als_reg>; }; }; @@ -573,7 +573,7 @@ compatible = "melfas,mms114"; reg = <0x48>; interrupt-parent = <&gpm2>; - interrupts = <3 2>; + interrupts = <3 IRQ_TYPE_EDGE_FALLING>; x-size = <720>; y-size = <1280>; avdd-supply = <&ldo23_reg>; @@ -611,7 +611,7 @@ max77686: max77686_pmic@09 { compatible = "maxim,max77686"; interrupt-parent = <&gpx0>; - interrupts = <7 0>; + interrupts = <7 IRQ_TYPE_NONE>; reg = <0x09>; #clock-cells = <1>; diff --git a/arch/arm/boot/dts/exynos5420-peach-pit.dts b/arch/arm/boot/dts/exynos5420-peach-pit.dts index 2cd65699a29c..f9a75bfd3f2b 100644 --- a/arch/arm/boot/dts/exynos5420-peach-pit.dts +++ b/arch/arm/boot/dts/exynos5420-peach-pit.dts @@ -603,7 +603,7 @@ max98090: codec@10 { compatible = "maxim,max98090"; reg = <0x10>; - interrupts = <2 0>; + interrupts = <2 IRQ_TYPE_NONE>; interrupt-parent = <&gpx0>; pinctrl-names = "default"; pinctrl-0 = <&max98090_irq>; @@ -944,7 +944,7 @@ cros_ec: cros-ec@0 { compatible = "google,cros-ec-spi"; interrupt-parent = <&gpx1>; - interrupts = <5 0>; + interrupts = <5 IRQ_TYPE_NONE>; pinctrl-names = "default"; pinctrl-0 = <&ec_spi_cs &ec_irq>; reg = <0>; diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-audio.dtsi b/arch/arm/boot/dts/exynos5422-odroidxu3-audio.dtsi index 9493923ec652..c0b85981c6bf 100644 --- a/arch/arm/boot/dts/exynos5422-odroidxu3-audio.dtsi +++ b/arch/arm/boot/dts/exynos5422-odroidxu3-audio.dtsi @@ -49,7 +49,7 @@ compatible = "maxim,max98090"; reg = <0x10>; interrupt-parent = <&gpx3>; - interrupts = <2 0>; + interrupts = <2 IRQ_TYPE_NONE>; clocks = <&i2s0 CLK_I2S_CDCLK>; clock-names = "mclk"; #sound-dai-cells = <0>; diff --git a/arch/arm/boot/dts/exynos5800-peach-pi.dts b/arch/arm/boot/dts/exynos5800-peach-pi.dts index ecf1c916e8fc..953dc8677dc8 100644 --- a/arch/arm/boot/dts/exynos5800-peach-pi.dts +++ b/arch/arm/boot/dts/exynos5800-peach-pi.dts @@ -603,7 +603,7 @@ max98091: codec@10 { compatible = "maxim,max98091"; reg = <0x10>; - interrupts = <2 0>; + interrupts = <2 IRQ_TYPE_NONE>; interrupt-parent = <&gpx0>; pinctrl-names = "default"; pinctrl-0 = <&max98091_irq>; @@ -913,7 +913,7 @@ cros_ec: cros-ec@0 { compatible = "google,cros-ec-spi"; interrupt-parent = <&gpx1>; - interrupts = <5 0>; + interrupts = <5 IRQ_TYPE_NONE>; pinctrl-names = "default"; pinctrl-0 = <&ec_spi_cs &ec_irq>; reg = <0>; -- cgit v1.2.3 From c92a4fb249bf98670543b4c41307e1e71942d513 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Fri, 2 Jun 2017 20:13:46 +0200 Subject: ARM: dts: exynos: Use human-friendly symbols for GIC interrupt properties Replace hard-coded values of type of GIC interrupt and its flags with respective macros from header to increase code readability. Suggested-by: Marek Szyprowski Signed-off-by: Krzysztof Kozlowski --- arch/arm/boot/dts/exynos5.dtsi | 84 +++++++++++++++++++-------------------- arch/arm/boot/dts/exynos5250.dtsi | 8 ++-- arch/arm/boot/dts/exynos5420.dtsi | 76 +++++++++++++++++------------------ arch/arm/boot/dts/exynos5440.dtsi | 2 +- 4 files changed, 85 insertions(+), 85 deletions(-) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/exynos5.dtsi b/arch/arm/boot/dts/exynos5.dtsi index b74c5379ca26..66d22521c976 100644 --- a/arch/arm/boot/dts/exynos5.dtsi +++ b/arch/arm/boot/dts/exynos5.dtsi @@ -55,38 +55,38 @@ interrupt-controller; samsung,combiner-nr = <32>; reg = <0x10440000 0x1000>; - interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>, - <0 1 IRQ_TYPE_LEVEL_HIGH>, - <0 2 IRQ_TYPE_LEVEL_HIGH>, - <0 3 IRQ_TYPE_LEVEL_HIGH>, - <0 4 IRQ_TYPE_LEVEL_HIGH>, - <0 5 IRQ_TYPE_LEVEL_HIGH>, - <0 6 IRQ_TYPE_LEVEL_HIGH>, - <0 7 IRQ_TYPE_LEVEL_HIGH>, - <0 8 IRQ_TYPE_LEVEL_HIGH>, - <0 9 IRQ_TYPE_LEVEL_HIGH>, - <0 10 IRQ_TYPE_LEVEL_HIGH>, - <0 11 IRQ_TYPE_LEVEL_HIGH>, - <0 12 IRQ_TYPE_LEVEL_HIGH>, - <0 13 IRQ_TYPE_LEVEL_HIGH>, - <0 14 IRQ_TYPE_LEVEL_HIGH>, - <0 15 IRQ_TYPE_LEVEL_HIGH>, - <0 16 IRQ_TYPE_LEVEL_HIGH>, - <0 17 IRQ_TYPE_LEVEL_HIGH>, - <0 18 IRQ_TYPE_LEVEL_HIGH>, - <0 19 IRQ_TYPE_LEVEL_HIGH>, - <0 20 IRQ_TYPE_LEVEL_HIGH>, - <0 21 IRQ_TYPE_LEVEL_HIGH>, - <0 22 IRQ_TYPE_LEVEL_HIGH>, - <0 23 IRQ_TYPE_LEVEL_HIGH>, - <0 24 IRQ_TYPE_LEVEL_HIGH>, - <0 25 IRQ_TYPE_LEVEL_HIGH>, - <0 26 IRQ_TYPE_LEVEL_HIGH>, - <0 27 IRQ_TYPE_LEVEL_HIGH>, - <0 28 IRQ_TYPE_LEVEL_HIGH>, - <0 29 IRQ_TYPE_LEVEL_HIGH>, - <0 30 IRQ_TYPE_LEVEL_HIGH>, - <0 31 IRQ_TYPE_LEVEL_HIGH>; + interrupts = , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + ; }; gic: interrupt-controller@10481000 { @@ -109,31 +109,31 @@ serial_0: serial@12C00000 { compatible = "samsung,exynos4210-uart"; reg = <0x12C00000 0x100>; - interrupts = <0 51 IRQ_TYPE_LEVEL_HIGH>; + interrupts = ; }; serial_1: serial@12C10000 { compatible = "samsung,exynos4210-uart"; reg = <0x12C10000 0x100>; - interrupts = <0 52 IRQ_TYPE_LEVEL_HIGH>; + interrupts = ; }; serial_2: serial@12C20000 { compatible = "samsung,exynos4210-uart"; reg = <0x12C20000 0x100>; - interrupts = <0 53 IRQ_TYPE_LEVEL_HIGH>; + interrupts = ; }; serial_3: serial@12C30000 { compatible = "samsung,exynos4210-uart"; reg = <0x12C30000 0x100>; - interrupts = <0 54 IRQ_TYPE_LEVEL_HIGH>; + interrupts = ; }; i2c_0: i2c@12C60000 { compatible = "samsung,s3c2440-i2c"; reg = <0x12C60000 0x100>; - interrupts = <0 56 IRQ_TYPE_LEVEL_HIGH>; + interrupts = ; #address-cells = <1>; #size-cells = <0>; samsung,sysreg-phandle = <&sysreg_system_controller>; @@ -143,7 +143,7 @@ i2c_1: i2c@12C70000 { compatible = "samsung,s3c2440-i2c"; reg = <0x12C70000 0x100>; - interrupts = <0 57 IRQ_TYPE_LEVEL_HIGH>; + interrupts = ; #address-cells = <1>; #size-cells = <0>; samsung,sysreg-phandle = <&sysreg_system_controller>; @@ -153,7 +153,7 @@ i2c_2: i2c@12C80000 { compatible = "samsung,s3c2440-i2c"; reg = <0x12C80000 0x100>; - interrupts = <0 58 IRQ_TYPE_LEVEL_HIGH>; + interrupts = ; #address-cells = <1>; #size-cells = <0>; samsung,sysreg-phandle = <&sysreg_system_controller>; @@ -163,7 +163,7 @@ i2c_3: i2c@12C90000 { compatible = "samsung,s3c2440-i2c"; reg = <0x12C90000 0x100>; - interrupts = <0 59 IRQ_TYPE_LEVEL_HIGH>; + interrupts = ; #address-cells = <1>; #size-cells = <0>; samsung,sysreg-phandle = <&sysreg_system_controller>; @@ -180,8 +180,8 @@ rtc: rtc@101E0000 { compatible = "samsung,s3c6410-rtc"; reg = <0x101E0000 0x100>; - interrupts = <0 43 IRQ_TYPE_LEVEL_HIGH>, - <0 44 IRQ_TYPE_LEVEL_HIGH>; + interrupts = , + ; status = "disabled"; }; diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi index fbdc1d53a2ce..8dbeb873e99c 100644 --- a/arch/arm/boot/dts/exynos5250.dtsi +++ b/arch/arm/boot/dts/exynos5250.dtsi @@ -153,10 +153,10 @@ timer { compatible = "arm,armv7-timer"; - interrupts = <1 13 0xf08>, - <1 14 0xf08>, - <1 11 0xf08>, - <1 10 0xf08>; + interrupts = , + , + , + ; /* * Unfortunately we need this since some versions * of U-Boot on Exynos don't set the CNTFRQ register, diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi index acd77b10b3df..02d2f898efa6 100644 --- a/arch/arm/boot/dts/exynos5420.dtsi +++ b/arch/arm/boot/dts/exynos5420.dtsi @@ -193,7 +193,7 @@ mfc: codec@11000000 { compatible = "samsung,mfc-v7"; reg = <0x11000000 0x10000>; - interrupts = <0 96 IRQ_TYPE_LEVEL_HIGH>; + interrupts = ; clocks = <&clock CLK_MFC>; clock-names = "mfc"; power-domains = <&mfc_pd>; @@ -203,7 +203,7 @@ mmc_0: mmc@12200000 { compatible = "samsung,exynos5420-dw-mshc-smu"; - interrupts = <0 75 IRQ_TYPE_LEVEL_HIGH>; + interrupts = ; #address-cells = <1>; #size-cells = <0>; reg = <0x12200000 0x2000>; @@ -215,7 +215,7 @@ mmc_1: mmc@12210000 { compatible = "samsung,exynos5420-dw-mshc-smu"; - interrupts = <0 76 IRQ_TYPE_LEVEL_HIGH>; + interrupts = ; #address-cells = <1>; #size-cells = <0>; reg = <0x12210000 0x2000>; @@ -227,7 +227,7 @@ mmc_2: mmc@12220000 { compatible = "samsung,exynos5420-dw-mshc"; - interrupts = <0 77 IRQ_TYPE_LEVEL_HIGH>; + interrupts = ; #address-cells = <1>; #size-cells = <0>; reg = <0x12220000 0x1000>; @@ -325,37 +325,37 @@ pinctrl_0: pinctrl@13400000 { compatible = "samsung,exynos5420-pinctrl"; reg = <0x13400000 0x1000>; - interrupts = <0 45 IRQ_TYPE_LEVEL_HIGH>; + interrupts = ; wakeup-interrupt-controller { compatible = "samsung,exynos4210-wakeup-eint"; interrupt-parent = <&gic>; - interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>; + interrupts = ; }; }; pinctrl_1: pinctrl@13410000 { compatible = "samsung,exynos5420-pinctrl"; reg = <0x13410000 0x1000>; - interrupts = <0 78 IRQ_TYPE_LEVEL_HIGH>; + interrupts = ; }; pinctrl_2: pinctrl@14000000 { compatible = "samsung,exynos5420-pinctrl"; reg = <0x14000000 0x1000>; - interrupts = <0 46 IRQ_TYPE_LEVEL_HIGH>; + interrupts = ; }; pinctrl_3: pinctrl@14010000 { compatible = "samsung,exynos5420-pinctrl"; reg = <0x14010000 0x1000>; - interrupts = <0 50 IRQ_TYPE_LEVEL_HIGH>; + interrupts = ; }; pinctrl_4: pinctrl@03860000 { compatible = "samsung,exynos5420-pinctrl"; reg = <0x03860000 0x1000>; - interrupts = <0 47 IRQ_TYPE_LEVEL_HIGH>; + interrupts = ; }; amba { @@ -368,7 +368,7 @@ adma: adma@03880000 { compatible = "arm,pl330", "arm,primecell"; reg = <0x03880000 0x1000>; - interrupts = <0 110 IRQ_TYPE_LEVEL_HIGH>; + interrupts = ; clocks = <&clock_audss EXYNOS_ADMA>; clock-names = "apb_pclk"; #dma-cells = <1>; @@ -379,7 +379,7 @@ pdma0: pdma@121A0000 { compatible = "arm,pl330", "arm,primecell"; reg = <0x121A0000 0x1000>; - interrupts = <0 34 IRQ_TYPE_LEVEL_HIGH>; + interrupts = ; clocks = <&clock CLK_PDMA0>; clock-names = "apb_pclk"; #dma-cells = <1>; @@ -390,7 +390,7 @@ pdma1: pdma@121B0000 { compatible = "arm,pl330", "arm,primecell"; reg = <0x121B0000 0x1000>; - interrupts = <0 35 IRQ_TYPE_LEVEL_HIGH>; + interrupts = ; clocks = <&clock CLK_PDMA1>; clock-names = "apb_pclk"; #dma-cells = <1>; @@ -401,7 +401,7 @@ mdma0: mdma@10800000 { compatible = "arm,pl330", "arm,primecell"; reg = <0x10800000 0x1000>; - interrupts = <0 33 IRQ_TYPE_LEVEL_HIGH>; + interrupts = ; clocks = <&clock CLK_MDMA0>; clock-names = "apb_pclk"; #dma-cells = <1>; @@ -412,7 +412,7 @@ mdma1: mdma@11C10000 { compatible = "arm,pl330", "arm,primecell"; reg = <0x11C10000 0x1000>; - interrupts = <0 124 IRQ_TYPE_LEVEL_HIGH>; + interrupts = ; clocks = <&clock CLK_MDMA1>; clock-names = "apb_pclk"; #dma-cells = <1>; @@ -484,7 +484,7 @@ spi_0: spi@12d20000 { compatible = "samsung,exynos4210-spi"; reg = <0x12d20000 0x100>; - interrupts = <0 68 IRQ_TYPE_LEVEL_HIGH>; + interrupts = ; dmas = <&pdma0 5 &pdma0 4>; dma-names = "tx", "rx"; @@ -500,7 +500,7 @@ spi_1: spi@12d30000 { compatible = "samsung,exynos4210-spi"; reg = <0x12d30000 0x100>; - interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>; + interrupts = ; dmas = <&pdma1 5 &pdma1 4>; dma-names = "tx", "rx"; @@ -516,7 +516,7 @@ spi_2: spi@12d40000 { compatible = "samsung,exynos4210-spi"; reg = <0x12d40000 0x100>; - interrupts = <0 70 IRQ_TYPE_LEVEL_HIGH>; + interrupts = ; dmas = <&pdma0 7 &pdma0 6>; dma-names = "tx", "rx"; @@ -544,7 +544,7 @@ dsi@14500000 { compatible = "samsung,exynos5410-mipi-dsi"; reg = <0x14500000 0x10000>; - interrupts = <0 82 IRQ_TYPE_LEVEL_HIGH>; + interrupts = ; phys = <&mipi_phy 1>; phy-names = "dsim"; clocks = <&clock CLK_DSIM1>, <&clock CLK_SCLK_MIPI1>; @@ -557,7 +557,7 @@ adc: adc@12D10000 { compatible = "samsung,exynos-adc-v2"; reg = <0x12D10000 0x100>; - interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>; + interrupts = ; clocks = <&clock CLK_TSADC>; clock-names = "adc"; #io-channel-cells = <1>; @@ -569,7 +569,7 @@ hsi2c_8: i2c@12E00000 { compatible = "samsung,exynos5250-hsi2c"; reg = <0x12E00000 0x1000>; - interrupts = <0 87 IRQ_TYPE_LEVEL_HIGH>; + interrupts = ; #address-cells = <1>; #size-cells = <0>; pinctrl-names = "default"; @@ -582,7 +582,7 @@ hsi2c_9: i2c@12E10000 { compatible = "samsung,exynos5250-hsi2c"; reg = <0x12E10000 0x1000>; - interrupts = <0 88 IRQ_TYPE_LEVEL_HIGH>; + interrupts = ; #address-cells = <1>; #size-cells = <0>; pinctrl-names = "default"; @@ -595,7 +595,7 @@ hsi2c_10: i2c@12E20000 { compatible = "samsung,exynos5250-hsi2c"; reg = <0x12E20000 0x1000>; - interrupts = <0 203 IRQ_TYPE_LEVEL_HIGH>; + interrupts = ; #address-cells = <1>; #size-cells = <0>; pinctrl-names = "default"; @@ -608,7 +608,7 @@ hdmi: hdmi@14530000 { compatible = "samsung,exynos5420-hdmi"; reg = <0x14530000 0x70000>; - interrupts = <0 95 IRQ_TYPE_LEVEL_HIGH>; + interrupts = ; clocks = <&clock CLK_HDMI>, <&clock CLK_SCLK_HDMI>, <&clock CLK_DOUT_PIXEL>, <&clock CLK_SCLK_HDMIPHY>, <&clock CLK_MOUT_HDMI>; @@ -640,7 +640,7 @@ mixer: mixer@14450000 { compatible = "samsung,exynos5420-mixer"; reg = <0x14450000 0x10000>; - interrupts = <0 94 IRQ_TYPE_LEVEL_HIGH>; + interrupts = ; clocks = <&clock CLK_MIXER>, <&clock CLK_HDMI>, <&clock CLK_SCLK_HDMI>; clock-names = "mixer", "hdmi", "sclk_hdmi"; @@ -651,7 +651,7 @@ rotator: rotator@11C00000 { compatible = "samsung,exynos5250-rotator"; reg = <0x11C00000 0x64>; - interrupts = <0 84 IRQ_TYPE_LEVEL_HIGH>; + interrupts = ; clocks = <&clock CLK_ROTATOR>; clock-names = "rotator"; iommus = <&sysmmu_rotator>; @@ -660,7 +660,7 @@ gsc_0: video-scaler@13e00000 { compatible = "samsung,exynos5-gsc"; reg = <0x13e00000 0x1000>; - interrupts = <0 85 IRQ_TYPE_LEVEL_HIGH>; + interrupts = ; clocks = <&clock CLK_GSCL0>; clock-names = "gscl"; power-domains = <&gsc_pd>; @@ -670,7 +670,7 @@ gsc_1: video-scaler@13e10000 { compatible = "samsung,exynos5-gsc"; reg = <0x13e10000 0x1000>; - interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>; + interrupts = ; clocks = <&clock CLK_GSCL1>; clock-names = "gscl"; power-domains = <&gsc_pd>; @@ -680,7 +680,7 @@ jpeg_0: jpeg@11F50000 { compatible = "samsung,exynos5420-jpeg"; reg = <0x11F50000 0x1000>; - interrupts = <0 89 IRQ_TYPE_LEVEL_HIGH>; + interrupts = ; clock-names = "jpeg"; clocks = <&clock CLK_JPEG>; iommus = <&sysmmu_jpeg0>; @@ -689,7 +689,7 @@ jpeg_1: jpeg@11F60000 { compatible = "samsung,exynos5420-jpeg"; reg = <0x11F60000 0x1000>; - interrupts = <0 168 IRQ_TYPE_LEVEL_HIGH>; + interrupts = ; clock-names = "jpeg"; clocks = <&clock CLK_JPEG2>; iommus = <&sysmmu_jpeg1>; @@ -709,7 +709,7 @@ tmu_cpu0: tmu@10060000 { compatible = "samsung,exynos5420-tmu"; reg = <0x10060000 0x100>; - interrupts = <0 65 IRQ_TYPE_LEVEL_HIGH>; + interrupts = ; clocks = <&clock CLK_TMU>; clock-names = "tmu_apbif"; #include "exynos5420-tmu-sensor-conf.dtsi" @@ -718,7 +718,7 @@ tmu_cpu1: tmu@10064000 { compatible = "samsung,exynos5420-tmu"; reg = <0x10064000 0x100>; - interrupts = <0 183 IRQ_TYPE_LEVEL_HIGH>; + interrupts = ; clocks = <&clock CLK_TMU>; clock-names = "tmu_apbif"; #include "exynos5420-tmu-sensor-conf.dtsi" @@ -727,7 +727,7 @@ tmu_cpu2: tmu@10068000 { compatible = "samsung,exynos5420-tmu-ext-triminfo"; reg = <0x10068000 0x100>, <0x1006c000 0x4>; - interrupts = <0 184 IRQ_TYPE_LEVEL_HIGH>; + interrupts = ; clocks = <&clock CLK_TMU>, <&clock CLK_TMU>; clock-names = "tmu_apbif", "tmu_triminfo_apbif"; #include "exynos5420-tmu-sensor-conf.dtsi" @@ -736,7 +736,7 @@ tmu_cpu3: tmu@1006c000 { compatible = "samsung,exynos5420-tmu-ext-triminfo"; reg = <0x1006c000 0x100>, <0x100a0000 0x4>; - interrupts = <0 185 IRQ_TYPE_LEVEL_HIGH>; + interrupts = ; clocks = <&clock CLK_TMU>, <&clock CLK_TMU_GPU>; clock-names = "tmu_apbif", "tmu_triminfo_apbif"; #include "exynos5420-tmu-sensor-conf.dtsi" @@ -745,7 +745,7 @@ tmu_gpu: tmu@100a0000 { compatible = "samsung,exynos5420-tmu-ext-triminfo"; reg = <0x100a0000 0x100>, <0x10068000 0x4>; - interrupts = <0 215 IRQ_TYPE_LEVEL_HIGH>; + interrupts = ; clocks = <&clock CLK_TMU_GPU>, <&clock CLK_TMU>; clock-names = "tmu_apbif", "tmu_triminfo_apbif"; #include "exynos5420-tmu-sensor-conf.dtsi" @@ -817,7 +817,7 @@ sysmmu_scaler1r: sysmmu@0x12890000 { compatible = "samsung,exynos-sysmmu"; reg = <0x12890000 0x1000>; - interrupts = <0 186 IRQ_TYPE_LEVEL_HIGH>; + interrupts = ; clock-names = "sysmmu", "master"; clocks = <&clock CLK_SMMU_MSCL1>, <&clock CLK_MSCL1>; #iommu-cells = <0>; @@ -826,7 +826,7 @@ sysmmu_scaler2r: sysmmu@0x128A0000 { compatible = "samsung,exynos-sysmmu"; reg = <0x128A0000 0x1000>; - interrupts = <0 188 IRQ_TYPE_LEVEL_HIGH>; + interrupts = ; clock-names = "sysmmu", "master"; clocks = <&clock CLK_SMMU_MSCL2>, <&clock CLK_MSCL2>; #iommu-cells = <0>; @@ -885,7 +885,7 @@ sysmmu_jpeg1: sysmmu@0x11F20000 { compatible = "samsung,exynos-sysmmu"; reg = <0x11F20000 0x1000>; - interrupts = <0 169 IRQ_TYPE_LEVEL_HIGH>; + interrupts = ; clock-names = "sysmmu", "master"; clocks = <&clock CLK_SMMU_JPEG2>, <&clock CLK_JPEG2>; #iommu-cells = <0>; diff --git a/arch/arm/boot/dts/exynos5440.dtsi b/arch/arm/boot/dts/exynos5440.dtsi index a4ea018464fc..bc4954e69f7b 100644 --- a/arch/arm/boot/dts/exynos5440.dtsi +++ b/arch/arm/boot/dts/exynos5440.dtsi @@ -200,7 +200,7 @@ compatible = "snps,dwmac-3.70a", "snps,dwmac"; reg = <0x00230000 0x8000>; interrupt-parent = <&gic>; - interrupts = ; + interrupts = ; interrupt-names = "macirq"; phy-mode = "sgmii"; clocks = <&clock CLK_GMAC0>; -- cgit v1.2.3 From bc03ce08396786c92d6591a81682c7da7accbfc8 Mon Sep 17 00:00:00 2001 From: Baruch Siach Date: Mon, 29 May 2017 07:51:19 +0300 Subject: ARM: dts: at91: sama5d2_xplained: remove wrong memory node The size field of the memory node is wrong. Rely on the default value in sama5d2.dtsi that happens to be correct for the SAMA5D2 Xplained board. Signed-off-by: Baruch Siach Signed-off-by: Alexandre Belloni --- arch/arm/boot/dts/at91-sama5d2_xplained.dts | 4 ---- 1 file changed, 4 deletions(-) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/at91-sama5d2_xplained.dts b/arch/arm/boot/dts/at91-sama5d2_xplained.dts index dbce6f7a73dd..2e2c3d1a1fa2 100644 --- a/arch/arm/boot/dts/at91-sama5d2_xplained.dts +++ b/arch/arm/boot/dts/at91-sama5d2_xplained.dts @@ -56,10 +56,6 @@ stdout-path = "serial0:115200n8"; }; - memory { - reg = <0x20000000 0x80000>; - }; - clocks { slow_xtal { clock-frequency = <32768>; -- cgit v1.2.3 From 694ca10ca059812219a2841f3c385aca8f6a3b17 Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Sat, 3 Jun 2017 22:44:27 +0800 Subject: ARM: sun8i: a83t: Add device node for R_PIO The A83T has 1 pingroup with 13 pins belonging to the R_PIO or special pin controller. Signed-off-by: Chen-Yu Tsai Acked-by: Maxime Ripard Acked-by: Linus Walleij --- arch/arm/boot/dts/sun8i-a83t.dtsi | 15 +++++++++++++++ 1 file changed, 15 insertions(+) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/sun8i-a83t.dtsi b/arch/arm/boot/dts/sun8i-a83t.dtsi index 49aeb56970ba..bf63e3b77572 100644 --- a/arch/arm/boot/dts/sun8i-a83t.dtsi +++ b/arch/arm/boot/dts/sun8i-a83t.dtsi @@ -44,6 +44,8 @@ #include +#include + / { interrupt-parent = <&gic>; #address-cells = <1>; @@ -280,5 +282,18 @@ #clock-cells = <1>; #reset-cells = <1>; }; + + r_pio: pinctrl@1f02c00 { + compatible = "allwinner,sun8i-a83t-r-pinctrl"; + reg = <0x01f02c00 0x400>; + interrupts = ; + clocks = <&r_ccu CLK_APB0_PIO>, <&osc24M>, + <&osc16Md512>; + clock-names = "apb", "hosc", "losc"; + gpio-controller; + #gpio-cells = <3>; + interrupt-controller; + #interrupt-cells = <3>; + }; }; }; -- cgit v1.2.3 From 13b23780cc514c28582edec1736b381465f08085 Mon Sep 17 00:00:00 2001 From: Patrice Chotard Date: Wed, 7 Jun 2017 09:16:00 +0200 Subject: ARM: dts: stm32: Add usart2_pins on stm32h743 Add usart2 pins definition in order to add usart2 support dedicated for console output on stm32h743i-disco board. Signed-off-by: Patrice Chotard Signed-off-by: Alexandre TORGUE --- arch/arm/boot/dts/stm32h743-pinctrl.dtsi | 13 +++++++++++++ 1 file changed, 13 insertions(+) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/stm32h743-pinctrl.dtsi b/arch/arm/boot/dts/stm32h743-pinctrl.dtsi index fcc1e0640233..76bbd6575fae 100644 --- a/arch/arm/boot/dts/stm32h743-pinctrl.dtsi +++ b/arch/arm/boot/dts/stm32h743-pinctrl.dtsi @@ -151,6 +151,19 @@ bias-disable; }; }; + + usart2_pins: usart2@0 { + pins1 { + pinmux = ; + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins2 { + pinmux = ; + bias-disable; + }; + }; }; }; }; -- cgit v1.2.3 From a56678cd570405624a031f0c400305763ed308f2 Mon Sep 17 00:00:00 2001 From: Patrice Chotard Date: Wed, 7 Jun 2017 09:16:00 +0200 Subject: ARM: dts: stm32: Add usart2 support on stm32h743 This usart is used for console output on stm32h743i-disco board Signed-off-by: Patrice Chotard Signed-off-by: Alexandre TORGUE --- arch/arm/boot/dts/stm32h743.dtsi | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/stm32h743.dtsi b/arch/arm/boot/dts/stm32h743.dtsi index 46856298ee16..36a99db0a3b4 100644 --- a/arch/arm/boot/dts/stm32h743.dtsi +++ b/arch/arm/boot/dts/stm32h743.dtsi @@ -68,6 +68,14 @@ }; + usart2: serial@40004400 { + compatible = "st,stm32f7-usart", "st,stm32f7-uart"; + reg = <0x40004400 0x400>; + interrupts = <38>; + status = "disabled"; + clocks = <&timer_clk>; + }; + timer5: timer@40000c00 { compatible = "st,stm32-timer"; reg = <0x40000c00 0x400>; -- cgit v1.2.3 From 437074645873d77e8958be4f7eeec66a69cf0077 Mon Sep 17 00:00:00 2001 From: Patrice Chotard Date: Wed, 7 Jun 2017 09:16:00 +0200 Subject: ARM: dts: stm32: Add stm32h743i-disco board Add basic support for stm32h743i-discovery board This board offers : _ 2MBytes Flash _ 1 x micro USB OTG port _ 1 x STLink connector (micro USB) _ 1 x micro SD card slot _ 1 x RJ45 connector _ 1 x RCA connector _ 2 x Audio jack connectors (in and out) _ 2 x speaker connectors (left and right) _ 1 x joystick _ 1 x DCMI connector (Digital camera interface) _ 1 x 4 inch DSI LCD (Display Serial Interface) _ Arduino Uno Connectors _ 2 x PIO connectors (PMOD and PMOD+) _ 1 x wakeup button _ 1 x reset button Signed-off-by: Patrice Chotard Signed-off-by: Alexandre TORGUE --- arch/arm/boot/dts/Makefile | 3 +- arch/arm/boot/dts/stm32h743i-disco.dts | 73 ++++++++++++++++++++++++++++++++++ 2 files changed, 75 insertions(+), 1 deletion(-) create mode 100644 arch/arm/boot/dts/stm32h743i-disco.dts (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 828165479ab0..7697691b70df 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -794,7 +794,8 @@ dtb-$(CONFIG_ARCH_STM32)+= \ stm32f769-disco.dtb \ stm32429i-eval.dtb \ stm32746g-eval.dtb \ - stm32h743i-eval.dtb + stm32h743i-eval.dtb \ + stm32h743i-disco.dtb dtb-$(CONFIG_MACH_SUN4I) += \ sun4i-a10-a1000.dtb \ sun4i-a10-ba10-tvbox.dtb \ diff --git a/arch/arm/boot/dts/stm32h743i-disco.dts b/arch/arm/boot/dts/stm32h743i-disco.dts new file mode 100644 index 000000000000..79e841d94079 --- /dev/null +++ b/arch/arm/boot/dts/stm32h743i-disco.dts @@ -0,0 +1,73 @@ +/* + * Copyright 2017 - Patrice Chotard + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "stm32h743.dtsi" +#include "stm32h743-pinctrl.dtsi" + +/ { + model = "STMicroelectronics STM32H743i-Discovery board"; + compatible = "st,stm32h743i-disco", "st,stm32h743"; + + chosen { + bootargs = "root=/dev/ram"; + stdout-path = "serial0:115200n8"; + }; + + memory { + reg = <0xd0000000 0x2000000>; + }; + + aliases { + serial0 = &usart2; + }; +}; + +&clk_hse { + clock-frequency = <125000000>; +}; + +&usart2 { + pinctrl-0 = <&usart2_pins>; + pinctrl-names = "default"; + status = "okay"; +}; -- cgit v1.2.3 From 73f9de0c7f5dd9eae6949135a7b316cb02365519 Mon Sep 17 00:00:00 2001 From: Javier Martinez Canillas Date: Tue, 23 May 2017 15:34:40 +0200 Subject: ARM: dts: uniphier: Add generic compatible string for I2C EEPROM The at24 driver allows to register I2C EEPROM chips using different vendor and devices, but the I2C subsystem does not take the vendor into account when matching using the I2C table since it only has device entries. But when matching using an OF table, both the vendor and device has to be taken into account so the driver defines only a set of compatible strings using the "atmel" vendor as a generic fallback for compatible I2C devices. So add this generic fallback to the device node compatible string to make the device to match the driver using the OF device ID table. Signed-off-by: Javier Martinez Canillas Signed-off-by: Masahiro Yamada --- arch/arm/boot/dts/uniphier-pro4-ace.dts | 2 +- arch/arm/boot/dts/uniphier-pro4-sanji.dts | 2 +- arch/arm/boot/dts/uniphier-pxs2-gentil.dts | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/uniphier-pro4-ace.dts b/arch/arm/boot/dts/uniphier-pro4-ace.dts index e45bf4f418b9..11690b57931c 100644 --- a/arch/arm/boot/dts/uniphier-pro4-ace.dts +++ b/arch/arm/boot/dts/uniphier-pro4-ace.dts @@ -52,7 +52,7 @@ status = "okay"; eeprom@54 { - compatible = "st,24c64"; + compatible = "st,24c64", "atmel,24c64"; reg = <0x54>; pagesize = <32>; }; diff --git a/arch/arm/boot/dts/uniphier-pro4-sanji.dts b/arch/arm/boot/dts/uniphier-pro4-sanji.dts index 18836886bc31..2763cebcd76a 100644 --- a/arch/arm/boot/dts/uniphier-pro4-sanji.dts +++ b/arch/arm/boot/dts/uniphier-pro4-sanji.dts @@ -47,7 +47,7 @@ status = "okay"; eeprom@54 { - compatible = "st,24c64"; + compatible = "st,24c64", "atmel,24c64"; reg = <0x54>; pagesize = <32>; }; diff --git a/arch/arm/boot/dts/uniphier-pxs2-gentil.dts b/arch/arm/boot/dts/uniphier-pxs2-gentil.dts index bb39bd171d1a..81560f75bfa7 100644 --- a/arch/arm/boot/dts/uniphier-pxs2-gentil.dts +++ b/arch/arm/boot/dts/uniphier-pxs2-gentil.dts @@ -44,7 +44,7 @@ status = "okay"; eeprom@54 { - compatible = "st,24c64"; + compatible = "st,24c64", "atmel,24c64"; reg = <0x54>; pagesize = <32>; }; -- cgit v1.2.3 From 2c323c43a3d619d67bffa57dc7480cfae4c53300 Mon Sep 17 00:00:00 2001 From: Martin Blumenstingl Date: Sun, 4 Jun 2017 20:33:41 +0200 Subject: ARM: dts: meson8: add and use the real clock controller This removes the dummy clk81 gate and replaces it with the actual clock controller's CLKID_CLK81. This will also allow us to pass the real clock IDs to all devices where the clock is controlled by clkc in the future. Signed-off-by: Martin Blumenstingl Acked-by: Jerome Brunet Signed-off-by: Kevin Hilman --- arch/arm/boot/dts/meson8.dtsi | 32 ++++++++++++++++---------------- 1 file changed, 16 insertions(+), 16 deletions(-) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/meson8.dtsi b/arch/arm/boot/dts/meson8.dtsi index 6993077331c7..9b0b3ddbb17e 100644 --- a/arch/arm/boot/dts/meson8.dtsi +++ b/arch/arm/boot/dts/meson8.dtsi @@ -43,6 +43,7 @@ * OTHER DEALINGS IN THE SOFTWARE. */ +#include #include /include/ "meson.dtsi" @@ -82,13 +83,6 @@ reg = <0x203>; }; }; - - clk81: clk@0 { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <141666666>; - }; - }; /* end of / */ &aobus { @@ -126,6 +120,12 @@ }; &cbus { + clkc: clock-controller@4000 { + #clock-cells = <1>; + compatible = "amlogic,meson8-clkc"; + reg = <0x8000 0x4>, <0x4000 0x460>; + }; + pinctrl_cbus: pinctrl@9880 { compatible = "amlogic,meson8-cbus-pinctrl"; reg = <0x9880 0x10>; @@ -172,20 +172,20 @@ }; ðmac { - clocks = <&clk81>; + clocks = <&clkc CLKID_CLK81>; clock-names = "stmmaceth"; }; &i2c_AO { - clocks = <&clk81>; + clocks = <&clkc CLKID_CLK81>; }; &i2c_A { - clocks = <&clk81>; + clocks = <&clkc CLKID_CLK81>; }; &i2c_B { - clocks = <&clk81>; + clocks = <&clkc CLKID_CLK81>; }; &L2 { @@ -195,21 +195,21 @@ }; &spifc { - clocks = <&clk81>; + clocks = <&clkc CLKID_CLK81>; }; &uart_AO { - clocks = <&clk81>; + clocks = <&clkc CLKID_CLK81>; }; &uart_A { - clocks = <&clk81>; + clocks = <&clkc CLKID_CLK81>; }; &uart_B { - clocks = <&clk81>; + clocks = <&clkc CLKID_CLK81>; }; &uart_C { - clocks = <&clk81>; + clocks = <&clkc CLKID_CLK81>; }; -- cgit v1.2.3 From 7a78ef92cdc5813cab2c3a8ca2334eaaedc6818c Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Fri, 9 Jun 2017 23:34:36 +0800 Subject: ARM: sun8i: h3: Enable EMAC with external PHY on Orange Pi Plus 2E The Orange Pi Plus 2E, unlike the Orange Pi PC and PC Plus which its schematics are based on, uses an external Realtek RTL8211E PHY in RGMII mode, with a GPIO enabling the regulator for I/O signalling power supplies. The PHY's main power supply is enabled by the main 5V power supply. Add the regulator and PHY nodes, and override the PHY phandle under the EMAC node, so that the EMAC works properly on this board. Signed-off-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun8i-h3-orangepi-plus2e.dts | 26 ++++++++++++++++++++++++++ 1 file changed, 26 insertions(+) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-plus2e.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-plus2e.dts index 5851a47a3089..80026f3caafc 100644 --- a/arch/arm/boot/dts/sun8i-h3-orangepi-plus2e.dts +++ b/arch/arm/boot/dts/sun8i-h3-orangepi-plus2e.dts @@ -50,4 +50,30 @@ / { model = "Xunlong Orange Pi Plus 2E"; compatible = "xunlong,orangepi-plus2e", "allwinner,sun8i-h3"; + + reg_gmac_3v3: gmac-3v3 { + compatible = "regulator-fixed"; + regulator-name = "gmac-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + startup-delay-us = <100000>; + enable-active-high; + gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>; /* PD6 */ + }; +}; + +&emac { + pinctrl-names = "default"; + pinctrl-0 = <&emac_rgmii_pins>; + phy-supply = <®_gmac_3v3>; + phy-handle = <&ext_rgmii_phy>; + phy-mode = "rgmii"; + status = "okay"; +}; + +&mdio { + ext_rgmii_phy: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + }; }; -- cgit v1.2.3 From 6f0b0c03fb97596ca313435df8e5d3fc52e8d00c Mon Sep 17 00:00:00 2001 From: Sebastian Reichel Date: Tue, 2 May 2017 10:03:01 +0200 Subject: ARM: dts: omap4-droid4: Add isl29030 ALS/proximity sensor The Droid 4 has a isl29030 to measure ambient light (e.g. for automatically adapting display brightness) and proximity. Signed-off-by: Sebastian Reichel Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/omap4-droid4-xt894.dts | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/omap4-droid4-xt894.dts b/arch/arm/boot/dts/omap4-droid4-xt894.dts index 13f8d8640208..935af4e8b33c 100644 --- a/arch/arm/boot/dts/omap4-droid4-xt894.dts +++ b/arch/arm/boot/dts/omap4-droid4-xt894.dts @@ -348,6 +348,17 @@ interrupt-names = "irq", "wakeup"; wakeup-source; }; + + isl29030@44 { + compatible = "isil,isl29030"; + reg = <0x44>; + + pinctrl-names = "default"; + pinctrl-0 = <&als_proximity_pins>; + + interrupt-parent = <&gpio6>; + interrupts = <17 IRQ_TYPE_LEVEL_LOW>; /* gpio177 */ + }; }; &omap4_pmx_core { @@ -395,6 +406,12 @@ >; }; + als_proximity_pins: pinmux_als_proximity_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x18c, PIN_INPUT_PULLUP | MUX_MODE3) + >; + }; + usb_ulpi_pins: pinmux_usb_ulpi_pins { pinctrl-single,pins = < OMAP4_IOPAD(0x196, MUX_MODE7) -- cgit v1.2.3 From d809f2cca354d88ccc19aad1ecbe54704448615e Mon Sep 17 00:00:00 2001 From: Sebastian Reichel Date: Thu, 8 Jun 2017 23:16:08 +0200 Subject: ARM: dts: omap4-droid4: Fix WLAN compatible Motorola Droid 4 uses a WL1285C, so use proper compatible value. To avoid regressions while support for the new compatible value is added to the Linux kernel, the old compatible value is preserved as fallback. Signed-off-by: Sebastian Reichel Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/omap4-droid4-xt894.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/omap4-droid4-xt894.dts b/arch/arm/boot/dts/omap4-droid4-xt894.dts index 935af4e8b33c..10ca1c174995 100644 --- a/arch/arm/boot/dts/omap4-droid4-xt894.dts +++ b/arch/arm/boot/dts/omap4-droid4-xt894.dts @@ -301,7 +301,7 @@ #address-cells = <1>; #size-cells = <0>; wlcore: wlcore@2 { - compatible = "ti,wl1283"; + compatible = "ti,wl1285", "ti,wl1283"; reg = <2>; interrupt-parent = <&gpio4>; interrupts = <4 IRQ_TYPE_LEVEL_HIGH>; /* gpio100 */ -- cgit v1.2.3 From b879d674e03fccb42b0e79f21b2105ad6a824229 Mon Sep 17 00:00:00 2001 From: Jacopo Mondi Date: Tue, 23 May 2017 21:20:54 +0200 Subject: ARM: dts: r7s72100: Add support for GR-Peach Add device tree source for Renesas GR-Peach board. GR-Peach is an RZ/A1H based board with 10MB of on-chip SRAM and 8MB QSPI flash storage. Add support for the board, and create a 2MB partition to use as rootfs. Signed-off-by: Jacopo Mondi Reviewed-by: Geert Uytterhoeven Signed-off-by: Simon Horman --- Documentation/devicetree/bindings/arm/shmobile.txt | 2 + arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/r7s72100-gr-peach.dts | 66 ++++++++++++++++++++++ 3 files changed, 69 insertions(+) create mode 100644 arch/arm/boot/dts/r7s72100-gr-peach.dts (limited to 'arch/arm/boot') diff --git a/Documentation/devicetree/bindings/arm/shmobile.txt b/Documentation/devicetree/bindings/arm/shmobile.txt index 170fe0562c63..4b60ce21f4f3 100644 --- a/Documentation/devicetree/bindings/arm/shmobile.txt +++ b/Documentation/devicetree/bindings/arm/shmobile.txt @@ -55,6 +55,8 @@ Boards: compatible = "renesas,bockw", "renesas,r8a7778" - Genmai (RTK772100BC00000BR) compatible = "renesas,genmai", "renesas,r7s72100" + - GR-Peach (X28A-M01-E/F) + compatible = "renesas,gr-peach", "renesas,r7s72100" - Gose (RTP0RC7793SEB00010S) compatible = "renesas,gose", "renesas,r8a7793" - H3ULCB (R-Car Starter Kit Premier, RTP0RC7795SKB00010S) diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 9c5e1d944d1c..9d64197f3e91 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -701,6 +701,7 @@ dtb-$(CONFIG_ARCH_REALVIEW) += \ dtb-$(CONFIG_ARCH_RENESAS) += \ emev2-kzm9d.dtb \ r7s72100-genmai.dtb \ + r7s72100-gr-peach.dtb \ r7s72100-rskrza1.dtb \ r8a73a4-ape6evm.dtb \ r8a7740-armadillo800eva.dtb \ diff --git a/arch/arm/boot/dts/r7s72100-gr-peach.dts b/arch/arm/boot/dts/r7s72100-gr-peach.dts new file mode 100644 index 000000000000..a1b2aef984f6 --- /dev/null +++ b/arch/arm/boot/dts/r7s72100-gr-peach.dts @@ -0,0 +1,66 @@ +/* + * Device Tree Source for the GR-Peach board + * + * Copyright (C) 2017 Jacopo Mondi + * Copyright (C) 2016 Renesas Electronics + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +/dts-v1/; +#include "r7s72100.dtsi" + +/ { + model = "GR-Peach"; + compatible = "renesas,gr-peach", "renesas,r7s72100"; + + aliases { + serial0 = &scif2; + }; + + chosen { + bootargs = "ignore_loglevel rw root=/dev/mtdblock0"; + stdout-path = "serial0:115200n8"; + }; + + memory@20000000 { + device_type = "memory"; + reg = <0x20000000 0x00a00000>; + + }; + + lbsc { + #address-cells = <1>; + #size-cells = <1>; + }; + + flash@18000000 { + compatible = "mtd-rom"; + probe-type = "map_rom"; + reg = <0x18000000 0x00800000>; + bank-width = <4>; + device-width = <1>; + + #address-cells = <1>; + #size-cells = <1>; + + rootfs@600000 { + label = "rootfs"; + reg = <0x00600000 0x00200000>; + }; + }; +}; + +&extal_clk { + clock-frequency = <13333000>; +}; + +&usb_x1_clk { + clock-frequency = <48000000>; +}; + +&scif2 { + status = "okay"; +}; -- cgit v1.2.3 From 8cae359049a88b75217b1c93774cfe3c3e610304 Mon Sep 17 00:00:00 2001 From: Ulrich Hecht Date: Fri, 19 May 2017 15:07:04 +0200 Subject: ARM: dts: gose: add composite video input Adds VIN, decoder and connector. Signed-off-by: Ulrich Hecht Signed-off-by: Simon Horman --- arch/arm/boot/dts/r8a7793-gose.dts | 59 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 59 insertions(+) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/r8a7793-gose.dts b/arch/arm/boot/dts/r8a7793-gose.dts index 30f083528468..76e3aca2029e 100644 --- a/arch/arm/boot/dts/r8a7793-gose.dts +++ b/arch/arm/boot/dts/r8a7793-gose.dts @@ -275,6 +275,16 @@ }; }; + composite-in { + compatible = "composite-video-connector"; + + port { + composite_con_in: endpoint { + remote-endpoint = <&adv7180_in>; + }; + }; + }; + x2_clk: x2-clock { compatible = "fixed-clock"; #clock-cells = <0>; @@ -411,6 +421,11 @@ groups = "vin0_data24", "vin0_sync", "vin0_clkenb", "vin0_clk"; function = "vin0"; }; + + vin1_pins: vin1 { + groups = "vin1_data8", "vin1_clk"; + function = "vin1"; + }; }; ðer { @@ -542,6 +557,32 @@ reg = <0x12>; }; + composite-in@20 { + compatible = "adi,adv7180cp"; + reg = <0x20>; + remote = <&vin1>; + + port { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + adv7180_in: endpoint { + remote-endpoint = <&composite_con_in>; + }; + }; + + port@3 { + reg = <3>; + adv7180_out: endpoint { + bus-width = <8>; + remote-endpoint = <&vin1ep>; + }; + }; + }; + }; + hdmi@39 { compatible = "adi,adv7511w"; reg = <0x39>; @@ -670,3 +711,21 @@ }; }; }; + +/* composite video input */ +&vin1 { + pinctrl-0 = <&vin1_pins>; + pinctrl-names = "default"; + + status = "okay"; + + port { + #address-cells = <1>; + #size-cells = <0>; + + vin1ep: endpoint { + remote-endpoint = <&adv7180_out>; + bus-width = <8>; + }; + }; +}; -- cgit v1.2.3 From aabf13bac0046a1add4a3c39881ffb0abe692542 Mon Sep 17 00:00:00 2001 From: Biju Das Date: Tue, 6 Jun 2017 16:10:17 +0100 Subject: ARM: dts: iwg20m: Add iWave RZG1M Qseven SOM Add support for iWave RZG1M Qseven System On Module. http://www.iwavesystems.com/rz-g1m-qseven-module.html Signed-off-by: Biju Das Reviewed-by: Chris Paterson Reviewed-by: Geert Uytterhoeven Signed-off-by: Simon Horman --- arch/arm/boot/dts/r8a7743-iwg20m.dtsi | 29 +++++++++++++++++++++++++++++ 1 file changed, 29 insertions(+) create mode 100644 arch/arm/boot/dts/r8a7743-iwg20m.dtsi (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/r8a7743-iwg20m.dtsi b/arch/arm/boot/dts/r8a7743-iwg20m.dtsi new file mode 100644 index 000000000000..001ca9144f4b --- /dev/null +++ b/arch/arm/boot/dts/r8a7743-iwg20m.dtsi @@ -0,0 +1,29 @@ +/* + * Device Tree Source for the iWave-RZG1M-20M Qseven SOM + * + * Copyright (C) 2017 Renesas Electronics Corp. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#include "r8a7743.dtsi" + +/ { + compatible = "iwave,g20m", "renesas,r8a7743"; + + memory@40000000 { + device_type = "memory"; + reg = <0 0x40000000 0 0x20000000>; + }; + + memory@200000000 { + device_type = "memory"; + reg = <2 0x00000000 0 0x20000000>; + }; +}; + +&extal_clk { + clock-frequency = <20000000>; +}; -- cgit v1.2.3 From ad2c0558d0494b420cadd6e887ddab2cd4e27e48 Mon Sep 17 00:00:00 2001 From: Biju Das Date: Tue, 6 Jun 2017 16:10:18 +0100 Subject: ARM: dts: iwg20d-q7: Add support for iWave G20D-Q7 board based on RZ/G1M Add support for iWave RainboW-G20D-Qseven board based on RZ/G1M. Signed-off-by: Biju Das Reviewed-by: Chris Paterson Reviewed-by: Geert Uytterhoeven Signed-off-by: Simon Horman --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/r8a7743-iwg20d-q7.dts | 25 +++++++++++++++++++++++++ 2 files changed, 26 insertions(+) create mode 100644 arch/arm/boot/dts/r8a7743-iwg20d-q7.dts (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 9d64197f3e91..77d7e2db2513 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -705,6 +705,7 @@ dtb-$(CONFIG_ARCH_RENESAS) += \ r7s72100-rskrza1.dtb \ r8a73a4-ape6evm.dtb \ r8a7740-armadillo800eva.dtb \ + r8a7743-iwg20d-q7.dtb \ r8a7743-sk-rzg1m.dtb \ r8a7745-sk-rzg1e.dtb \ r8a7778-bockw.dtb \ diff --git a/arch/arm/boot/dts/r8a7743-iwg20d-q7.dts b/arch/arm/boot/dts/r8a7743-iwg20d-q7.dts new file mode 100644 index 000000000000..9b54783cc2a5 --- /dev/null +++ b/arch/arm/boot/dts/r8a7743-iwg20d-q7.dts @@ -0,0 +1,25 @@ +/* + * Device Tree Source for the iWave-RZG1M Qseven carrier board + * + * Copyright (C) 2017 Renesas Electronics Corp. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +/dts-v1/; +#include "r8a7743-iwg20m.dtsi" + +/ { + model = "iWave Systems RainboW-G20D-Qseven board based on RZ/G1M"; + compatible = "iwave,g20d", "iwave,g20m", "renesas,r8a7743"; + + aliases { + serial0 = &scif0; + }; +}; + +&scif0 { + status = "okay"; +}; -- cgit v1.2.3 From f7d569c1e6a6fa731fc34083a9f0191b7360eeb1 Mon Sep 17 00:00:00 2001 From: Rob Herring Date: Fri, 9 Jun 2017 17:50:40 +0200 Subject: ARM: dts: r8a779x: Fix PCI bus dtc warnings The bogus 'device_type = "pci"' confuses dtc, causing lots of totally unrelated warnings. After fixing that, real warnings like arch/arm/boot/dts/r8a7790-lager.dtb: Warning (pci_device_reg): Node /pci@ee090000/usb@0,1 PCI unit address format error, expected "1,0" are left. Correct the unit-addresses and reg properties of the subnodes to fix these. Signed-off-by: Rob Herring [geert: Improve description] Signed-off-by: Geert Uytterhoeven Signed-off-by: Simon Horman --- arch/arm/boot/dts/r8a7790.dtsi | 16 ++++++---------- arch/arm/boot/dts/r8a7791.dtsi | 16 ++++++---------- arch/arm/boot/dts/r8a7794.dtsi | 16 ++++++---------- 3 files changed, 18 insertions(+), 30 deletions(-) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi index 416956a42c93..2805a8608d4b 100644 --- a/arch/arm/boot/dts/r8a7790.dtsi +++ b/arch/arm/boot/dts/r8a7790.dtsi @@ -1602,16 +1602,14 @@ 0x0800 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH 0x1000 0 0 2 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; - usb@0,1 { + usb@1,0 { reg = <0x800 0 0 0 0>; - device_type = "pci"; phys = <&usb0 0>; phy-names = "usb"; }; - usb@0,2 { + usb@2,0 { reg = <0x1000 0 0 0 0>; - device_type = "pci"; phys = <&usb0 0>; phy-names = "usb"; }; @@ -1658,16 +1656,14 @@ 0x0800 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH 0x1000 0 0 2 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; - usb@0,1 { - reg = <0x800 0 0 0 0>; - device_type = "pci"; + usb@1,0 { + reg = <0x20800 0 0 0 0>; phys = <&usb2 0>; phy-names = "usb"; }; - usb@0,2 { - reg = <0x1000 0 0 0 0>; - device_type = "pci"; + usb@2,0 { + reg = <0x21000 0 0 0 0>; phys = <&usb2 0>; phy-names = "usb"; }; diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi index b730c889a404..bd93f699ad84 100644 --- a/arch/arm/boot/dts/r8a7791.dtsi +++ b/arch/arm/boot/dts/r8a7791.dtsi @@ -1613,16 +1613,14 @@ 0x0800 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH 0x1000 0 0 2 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; - usb@0,1 { + usb@1,0 { reg = <0x800 0 0 0 0>; - device_type = "pci"; phys = <&usb0 0>; phy-names = "usb"; }; - usb@0,2 { + usb@2,0 { reg = <0x1000 0 0 0 0>; - device_type = "pci"; phys = <&usb0 0>; phy-names = "usb"; }; @@ -1648,16 +1646,14 @@ 0x0800 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH 0x1000 0 0 2 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; - usb@0,1 { - reg = <0x800 0 0 0 0>; - device_type = "pci"; + usb@1,0 { + reg = <0x10800 0 0 0 0>; phys = <&usb2 0>; phy-names = "usb"; }; - usb@0,2 { - reg = <0x1000 0 0 0 0>; - device_type = "pci"; + usb@2,0 { + reg = <0x11000 0 0 0 0>; phys = <&usb2 0>; phy-names = "usb"; }; diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi index a19b884fb258..7d9a81d970d8 100644 --- a/arch/arm/boot/dts/r8a7794.dtsi +++ b/arch/arm/boot/dts/r8a7794.dtsi @@ -820,16 +820,14 @@ 0x0800 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH 0x1000 0 0 2 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; - usb@0,1 { + usb@1,0 { reg = <0x800 0 0 0 0>; - device_type = "pci"; phys = <&usb0 0>; phy-names = "usb"; }; - usb@0,2 { + usb@2,0 { reg = <0x1000 0 0 0 0>; - device_type = "pci"; phys = <&usb0 0>; phy-names = "usb"; }; @@ -855,16 +853,14 @@ 0x0800 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH 0x1000 0 0 2 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; - usb@0,1 { - reg = <0x800 0 0 0 0>; - device_type = "pci"; + usb@1,0 { + reg = <0x10800 0 0 0 0>; phys = <&usb2 0>; phy-names = "usb"; }; - usb@0,2 { - reg = <0x1000 0 0 0 0>; - device_type = "pci"; + usb@2,0 { + reg = <0x11000 0 0 0 0>; phys = <&usb2 0>; phy-names = "usb"; }; -- cgit v1.2.3 From c8ceb5ac1ac0aa9bd7c2be9c094f58672bd5669a Mon Sep 17 00:00:00 2001 From: Suman Anna Date: Wed, 7 Jun 2017 16:27:25 -0500 Subject: ARM: dts: omap44xx-clocks: Set IVA DPLL and its output clock rates The IVA DPLL is not an essential DPLL for the functionality of a bootloader and is usually not configured (e.g. older u-boots configure it only if CONFIG_SYS_CLOCKS_ENABLE_ALL is enabled and u-boots newer than 2014.01 do not even have an option), and this results in incorrect operating frequencies when trying to use a DSP or IVAHD, whose root clocks are derived from this DPLL. Use the DT standard properties "assigned-clocks" and "assigned-clock-rates" to set the IVA DPLL clock rate and the rates for its derivative clocks at boot time to properly initialize/lock this DPLL. The DPLL will automatically transition into a low-power stop mode when the associated output clocks are not utilized or gated automatically. The reset values of the dividers M4 & M5 (functional clocks for DSP and IVAHD respectively) are identical to each other, but are different at each OPP. The reset values also do not match a specific OPP. So, the derived output clocks from the IVA DPLL have to be initialized as well to avoid initializing these divider outputs to incorrect frequencies. The clock rates are chosen based on the OPP100 values as defined in the OMAP4430 ES2.x Public TRM vAP, section "3.6.3.8.7 DPLL_IVA Preferred Settings". The DPLL locked frequency is 1862.4 MHz (value for DPLL_IVA_X2_CLK), so the dpll_iva_ck clock rate used is half of this value. Signed-off-by: Suman Anna Acked-by: Tero Kristo Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/omap44xx-clocks.dtsi | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/omap44xx-clocks.dtsi b/arch/arm/boot/dts/omap44xx-clocks.dtsi index 9573b37fbaa7..9cb205b87835 100644 --- a/arch/arm/boot/dts/omap44xx-clocks.dtsi +++ b/arch/arm/boot/dts/omap44xx-clocks.dtsi @@ -357,6 +357,8 @@ compatible = "ti,omap4-dpll-clock"; clocks = <&sys_clkin_ck>, <&iva_hsd_byp_clk_mux_ck>; reg = <0x01a0>, <0x01a4>, <0x01ac>, <0x01a8>; + assigned-clocks = <&dpll_iva_ck>; + assigned-clock-rates = <931200000>; }; dpll_iva_x2_ck: dpll_iva_x2_ck { @@ -374,6 +376,8 @@ reg = <0x01b8>; ti,index-starts-at-one; ti,invert-autoidle-bit; + assigned-clocks = <&dpll_iva_m4x2_ck>; + assigned-clock-rates = <465600000>; }; dpll_iva_m5x2_ck: dpll_iva_m5x2_ck@1bc { @@ -385,6 +389,8 @@ reg = <0x01bc>; ti,index-starts-at-one; ti,invert-autoidle-bit; + assigned-clocks = <&dpll_iva_m5x2_ck>; + assigned-clock-rates = <266100000>; }; dpll_mpu_ck: dpll_mpu_ck@160 { -- cgit v1.2.3 From b58104f0a66c70b4bee271881d4496dfdec194c2 Mon Sep 17 00:00:00 2001 From: Suman Anna Date: Wed, 7 Jun 2017 16:27:26 -0500 Subject: ARM: dts: omap54xx-clocks: Set IVA DPLL and its output clock rates The IVA DPLL is not an essential DPLL for the functionality of a bootloader and is usually not configured (e.g. older u-boots configure it only if CONFIG_SYS_CLOCKS_ENABLE_ALL is enabled and u-boots newer than 2014.01 do not even have an option), and this results in incorrect operating frequencies when trying to use a DSP or IVAHD, whose root clocks are derived from this DPLL. Use the DT standard properties "assigned-clocks" and "assigned-clock-rates" to set the IVA DPLL clock rate and the rates for its derivative clocks at boot time to properly initialize/lock this DPLL. The DPLL will automatically transition into a low-power stop mode when the associated output clocks are not utilized or gated automatically. The reset values of the dividers H11 & H12 (functional clocks for DSP and IVAHD respectively) are identical to each other, but are different at each OPP. The reset values also do not match a specific OPP. So, the derived output clocks from the IVA DPLL have to be initialized as well to avoid initializing these divider outputs to incorrect frequencies. The clock rates are chosen based on the OPP_NOM values as defined in the OMAP5432 SR2.0 Data Manual Book vK, section 5.2.3.5 "DPLL_IVA Preferred Settings". The recommended maximum DPLL locked frequency is 2330 MHz for OPP_NOM (value for DPLL_IVA_X2_CLK), so the dpll_iva_ck clock rate used is half of this value. The value 465.92 MHz is used instead of 465.9 MHz for dpll_iva_h11x2_ck so that proper divider value can be calculated. Signed-off-by: Suman Anna Acked-by: Tero Kristo Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/omap54xx-clocks.dtsi | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/omap54xx-clocks.dtsi b/arch/arm/boot/dts/omap54xx-clocks.dtsi index 4899c2359d0a..529193442620 100644 --- a/arch/arm/boot/dts/omap54xx-clocks.dtsi +++ b/arch/arm/boot/dts/omap54xx-clocks.dtsi @@ -315,6 +315,8 @@ compatible = "ti,omap4-dpll-clock"; clocks = <&sys_clkin>, <&dpll_iva_byp_mux>; reg = <0x01a0>, <0x01a4>, <0x01ac>, <0x01a8>; + assigned-clocks = <&dpll_iva_ck>; + assigned-clock-rates = <1165000000>; }; dpll_iva_x2_ck: dpll_iva_x2_ck { @@ -330,6 +332,8 @@ ti,max-div = <63>; reg = <0x01b8>; ti,index-starts-at-one; + assigned-clocks = <&dpll_iva_h11x2_ck>; + assigned-clock-rates = <465920000>; }; dpll_iva_h12x2_ck: dpll_iva_h12x2_ck@1bc { @@ -339,6 +343,8 @@ ti,max-div = <63>; reg = <0x01bc>; ti,index-starts-at-one; + assigned-clocks = <&dpll_iva_h12x2_ck>; + assigned-clock-rates = <388300000>; }; mpu_dpll_hs_clk_div: mpu_dpll_hs_clk_div { -- cgit v1.2.3 From 39879c7d963ef6392235b2cc107c2d6dd25aa55d Mon Sep 17 00:00:00 2001 From: Suman Anna Date: Wed, 7 Jun 2017 16:27:27 -0500 Subject: ARM: dts: dra7xx-clocks: Source IPU1 functional clock from CORE DPLL The IPU1 functional clock is actually the output of a mux clock, ipu1_gfclk_mux. The mux clock is sourced by default from the DPLL_ABE_X2_CLK, and this results in a rather odd clock frequency (361 MHz) for the IPU1 functional clock on platforms where ABE_DPLL is configured properly. Reconfigure the mux clock to be sourced from CORE_IPU_ISS_BOOST_CLK (dpll_core_h22x2_ck), so that both the IPU1 and IPU2 are running from the same clock and clocked at the same nominal frequency of 425 MHz. This also ensures that IPU1 functional clock is always configured properly and becomes independent of the state of the ABE DPLL on all boards. Signed-off-by: Suman Anna Acked-by: Tero Kristo Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/dra7xx-clocks.dtsi | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/dra7xx-clocks.dtsi b/arch/arm/boot/dts/dra7xx-clocks.dtsi index 3330738e4c6e..cfaf27215901 100644 --- a/arch/arm/boot/dts/dra7xx-clocks.dtsi +++ b/arch/arm/boot/dts/dra7xx-clocks.dtsi @@ -791,6 +791,8 @@ clocks = <&dpll_abe_m2x2_ck>, <&dpll_core_h22x2_ck>; ti,bit-shift = <24>; reg = <0x0520>; + assigned-clocks = <&ipu1_gfclk_mux>; + assigned-clock-parents = <&dpll_core_h22x2_ck>; }; mcasp1_ahclkr_mux: mcasp1_ahclkr_mux@550 { -- cgit v1.2.3 From 268f6644aa0c2d73bfcebf0e3f0ffc9fc82f82cd Mon Sep 17 00:00:00 2001 From: Suman Anna Date: Wed, 7 Jun 2017 16:27:28 -0500 Subject: ARM: dts: dra7xx-clocks: Set DSP DPLL and its output clock rates The DSP DPLL is a new DPLL compared to previous OMAP generations and supplies the root clocks for the DSP processors, as well as a mux input source for EVE sub-system (on applicable SoCs). This DPLL is currently not configured by older bootloaders. Use the DT standard properties "assigned-clocks" and "assigned-clock-rates" to set the DSP DPLL clock rate and the rates for its derivative clocks at boot time to properly initialize/lock this DPLL and be independent of the bootloader version. Newer u-boots (from 2017.01 onwards) reuse and can update these properties to choose an appropriate one-time fixed OPP configuration. The DPLL will automatically transition into a low-power stop mode when the associated output clocks are not utilized or gated automatically. The DSP DPLL provides two output clocks, DSP_GFCLK and EVE_GCLK. The desired rate for DSP_GFCLK is 600 MHz (same as DSP DPLL CLKOUT frequency), and is currently auto set due to the desired M2 divider value being the same as reset value for the locked frequency of 600 MHz. The EVE_GCLK however is required to be 400 MHz, so set the dpll_dsp_m3x2_ck's rate explicitly so that the divider is set properly. The dpll_dsp_m2_ck rate is also set explicitly to not rely on any implicit matching divider reset values to the locked DPLL frequency. The OPP_NOM clock frequencies are defined in the AM572x SR2.0 Data Sheet vB, section 5.5.2 "Voltage And Core Clock Specifications". The clock rates are chosen based on these OPP_NOM values and defined as per a DRA7xx PLL spec document. The DPLL locked frequency is 1200 MHz, so the dpll_dsp_ck clock rate used is half of this value. Signed-off-by: Suman Anna Acked-by: Tero Kristo Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/dra7xx-clocks.dtsi | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/dra7xx-clocks.dtsi b/arch/arm/boot/dts/dra7xx-clocks.dtsi index cfaf27215901..8a82490035d9 100644 --- a/arch/arm/boot/dts/dra7xx-clocks.dtsi +++ b/arch/arm/boot/dts/dra7xx-clocks.dtsi @@ -338,6 +338,8 @@ compatible = "ti,omap4-dpll-clock"; clocks = <&sys_clkin1>, <&dpll_dsp_byp_mux>; reg = <0x0234>, <0x0238>, <0x0240>, <0x023c>; + assigned-clocks = <&dpll_dsp_ck>; + assigned-clock-rates = <600000000>; }; dpll_dsp_m2_ck: dpll_dsp_m2_ck@244 { @@ -349,6 +351,8 @@ reg = <0x0244>; ti,index-starts-at-one; ti,invert-autoidle-bit; + assigned-clocks = <&dpll_dsp_m2_ck>; + assigned-clock-rates = <600000000>; }; iva_dpll_hs_clk_div: iva_dpll_hs_clk_div { @@ -659,6 +663,8 @@ reg = <0x0248>; ti,index-starts-at-one; ti,invert-autoidle-bit; + assigned-clocks = <&dpll_dsp_m3x2_ck>; + assigned-clock-rates = <400000000>; }; dpll_gmac_x2_ck: dpll_gmac_x2_ck { -- cgit v1.2.3 From 32a04832a120b8ddc6b8752d30ba4be00fa23b74 Mon Sep 17 00:00:00 2001 From: Suman Anna Date: Wed, 7 Jun 2017 16:27:29 -0500 Subject: ARM: dts: dra7xx-clocks: Set IVA DPLL and its output clock rates The IVA DPLL in DRA7xx provides the output clocks for only the IVAHD subsystem in DRA7xx as compared to previous OMAP generations when it provided the clocks for both DSP and IVAHD subsystems. This DPLL is currently not configured by older bootloaders. Use the DT standard properties "assigned-clocks" and "assigned-clock-rates" to set the IVA DPLL clock rate and the rates for its derivative clocks at boot time to properly initialize/lock this DPLL and be independent of the bootloader version. Newer u-boots (from 2017.01 onwards) reuse and can update these properties to choose an appropriate one-time fixed OPP configuration. The DPLL will automatically transition into a low-power stop mode when the associated output clocks are not utilized or gated automatically. The reset value of the divider M2 (that supplies the IVA_GFLCK, the functional clock for the IVAHD subsystem) does not match a specific OPP. So, the derived output clock from this IVA DPLL has to be initialized as well to avoid initializing these divider outputs to an incorrect frequencies. The OPP_NOM clock frequencies are defined in the AM572x SR2.0 Data Sheet vB, section 5.5.2 "Voltage And Core Clock Specifications". The clock rates are chosen based on these OPP_NOM values and defined as per a DRA7xx PLL spec document. The DPLL locked frequency is 2300 MHz, so the dpll_iva_ck clock rate used is half of this value. The value for the divider clock, dpll_iva_m2_ck, has to be set to 388.333334 MHz or more for the divider clk logic to compute the appropriate divider value for OPP_NOM. Signed-off-by: Suman Anna Acked-by: Tero Kristo Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/dra7xx-clocks.dtsi | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/dra7xx-clocks.dtsi b/arch/arm/boot/dts/dra7xx-clocks.dtsi index 8a82490035d9..76e2b7478141 100644 --- a/arch/arm/boot/dts/dra7xx-clocks.dtsi +++ b/arch/arm/boot/dts/dra7xx-clocks.dtsi @@ -376,6 +376,8 @@ compatible = "ti,omap4-dpll-clock"; clocks = <&sys_clkin1>, <&dpll_iva_byp_mux>; reg = <0x01a0>, <0x01a4>, <0x01ac>, <0x01a8>; + assigned-clocks = <&dpll_iva_ck>; + assigned-clock-rates = <1165000000>; }; dpll_iva_m2_ck: dpll_iva_m2_ck@1b0 { @@ -387,6 +389,8 @@ reg = <0x01b0>; ti,index-starts-at-one; ti,invert-autoidle-bit; + assigned-clocks = <&dpll_iva_m2_ck>; + assigned-clock-rates = <388333334>; }; iva_dclk: iva_dclk { -- cgit v1.2.3 From fcd104b50fd0a8b638ab01b2e17252d16868aa49 Mon Sep 17 00:00:00 2001 From: Subhajit Paul Date: Wed, 7 Jun 2017 16:27:30 -0500 Subject: ARM: dts: dra7xx-clocks: Use DPLL_GPU for GPU clocks The GPU has two functional clocks - GPU_CORE_GCLK and GPU_HYD_GCLK. Both of these are mux clocks and are derived from the DPLL_CORE H14 output clock CORE_GPU_CLK by default. These clocks can also be be derived from DPLL_PER or DPLL_GPU. The GPU DPLL provides the output clocks primarily for the GPU. Configuring the GPU for different OPP clock frequencies is easier to achieve when using the DPLL_GPU rather than the other two DPLLs due to: 1. minimal affect on any other output clocks from these DPLLs 2. may require an impossible post-divider values on existing DPLLs without affecting other clocks. So, switch the GPU functional clocks to be sourced from GPU DPLL by default. This is done using the DT standard properties "assigned-clocks" and "assigned-clock-parents". Newer u-boots (from 2017.01 onwards) reuse and can update these properties to choose an appropriate one-time fixed OPP configuration as all the required ABB/AVS setup is performed within the bootloader. Note that there is no DVFS supported for any of the non-MPU domains. The DPLL will automatically transition into a low-power stop mode when the associated output clocks are not utilized or gated automatically. This patch also sets the initial values for the DPLL_GPU outputs. These values are chosen based on the OPP_NOM values defined as per recommendation from design team. The DPLL locked frequency is kept at 1277 MHz, so that the value for the divider clock, dpll_gpu_m2_ck, can be set to 425.67 MHz for OPP_NOM. Signed-off-by: Subhajit Paul [s-anna@ti.com: revise patch description] Signed-off-by: Suman Anna Acked-by: Tero Kristo Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/dra7xx-clocks.dtsi | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/dra7xx-clocks.dtsi b/arch/arm/boot/dts/dra7xx-clocks.dtsi index 76e2b7478141..cf229dfabf61 100644 --- a/arch/arm/boot/dts/dra7xx-clocks.dtsi +++ b/arch/arm/boot/dts/dra7xx-clocks.dtsi @@ -414,6 +414,8 @@ compatible = "ti,omap4-dpll-clock"; clocks = <&sys_clkin1>, <&dpll_gpu_byp_mux>; reg = <0x02d8>, <0x02dc>, <0x02e4>, <0x02e0>; + assigned-clocks = <&dpll_gpu_ck>; + assigned-clock-rates = <1277000000>; }; dpll_gpu_m2_ck: dpll_gpu_m2_ck@2e8 { @@ -425,6 +427,8 @@ reg = <0x02e8>; ti,index-starts-at-one; ti,invert-autoidle-bit; + assigned-clocks = <&dpll_gpu_m2_ck>; + assigned-clock-rates = <425666667>; }; dpll_core_m2_ck: dpll_core_m2_ck@130 { @@ -1760,6 +1764,8 @@ clocks = <&dpll_core_h14x2_ck>, <&dpll_per_h14x2_ck>, <&dpll_gpu_m2_ck>; ti,bit-shift = <24>; reg = <0x1220>; + assigned-clocks = <&gpu_core_gclk_mux>; + assigned-clock-parents = <&dpll_gpu_m2_ck>; }; gpu_hyd_gclk_mux: gpu_hyd_gclk_mux@1220 { @@ -1768,6 +1774,8 @@ clocks = <&dpll_core_h14x2_ck>, <&dpll_per_h14x2_ck>, <&dpll_gpu_m2_ck>; ti,bit-shift = <26>; reg = <0x1220>; + assigned-clocks = <&gpu_hyd_gclk_mux>; + assigned-clock-parents = <&dpll_gpu_m2_ck>; }; l3instr_ts_gclk_div: l3instr_ts_gclk_div@e50 { -- cgit v1.2.3 From c3d28e537999bc7c7d39ca09d11252137e1fee02 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Thu, 1 Jun 2017 07:26:37 -0700 Subject: ARM: dts: omap4-droid4: Configure CPCAP battery driver Configure CPCAP battery driver. Cc: devicetree@vger.kernel.org Cc: Marcel Partap Cc: Michael Scott Reviewed-by: Sebastian Reichel Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/motorola-cpcap-mapphone.dtsi | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/motorola-cpcap-mapphone.dtsi b/arch/arm/boot/dts/motorola-cpcap-mapphone.dtsi index f5aeb3959afd..1eb5da1dc8f0 100644 --- a/arch/arm/boot/dts/motorola-cpcap-mapphone.dtsi +++ b/arch/arm/boot/dts/motorola-cpcap-mapphone.dtsi @@ -26,6 +26,22 @@ #io-channel-cells = <1>; }; + cpcap_battery: battery { + compatible = "motorola,cpcap-battery"; + interrupts-extended = < + &cpcap 6 0 &cpcap 5 0 &cpcap 3 0 + &cpcap 20 0 &cpcap 54 0 + >; + interrupt-names = + "eol", "lowbph", "lowbpl", + "chrgcurr1", "battdetb"; + io-channels = <&cpcap_adc 0 &cpcap_adc 1 + &cpcap_adc 5 &cpcap_adc 6>; + io-channel-names = "battdetb", "battp", + "chg_isense", "batti"; + power-supplies = <&cpcap_charger>; + }; + cpcap_charger: charger { compatible = "motorola,mapphone-cpcap-charger"; interrupts-extended = < -- cgit v1.2.3 From 36c2cb1830e0799f7f35c1429404c842daa8996d Mon Sep 17 00:00:00 2001 From: Rafał Miłecki Date: Fri, 14 Apr 2017 23:42:28 +0200 Subject: ARM: dts: BCM5301X: Add CPU thermal sensor and zone MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This uses CPU thermal sensor available on every Northstar chipset to monitor temperature. We don't have any cooling or throttling so only a critical trip was added. Signed-off-by: Rafał Miłecki Acked-by: Jon Mason Signed-off-by: Florian Fainelli --- arch/arm/boot/dts/bcm5301x.dtsi | 26 ++++++++++++++++++++++++++ 1 file changed, 26 insertions(+) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/bcm5301x.dtsi b/arch/arm/boot/dts/bcm5301x.dtsi index acee36a61004..ffcbe49c8f39 100644 --- a/arch/arm/boot/dts/bcm5301x.dtsi +++ b/arch/arm/boot/dts/bcm5301x.dtsi @@ -349,6 +349,12 @@ "sata2"; }; + thermal: thermal@1800c2c0 { + compatible = "brcm,ns-thermal"; + reg = <0x1800c2c0 0x10>; + #thermal-sensor-cells = <0>; + }; + srab: srab@18007000 { compatible = "brcm,bcm5301x-srab"; reg = <0x18007000 0x1000>; @@ -412,4 +418,24 @@ status = "disabled"; }; }; + + thermal-zones { + cpu_thermal: cpu-thermal { + polling-delay-passive = <0>; + polling-delay = <1000>; + coefficients = <(-556) 418000>; + thermal-sensors = <&thermal>; + + trips { + cpu-crit { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + + cooling-maps { + }; + }; + }; }; -- cgit v1.2.3 From 23f1eca6d59b5a341f63d9e96bb80734d29436c8 Mon Sep 17 00:00:00 2001 From: Rafał Miłecki Date: Wed, 19 Apr 2017 23:54:25 +0200 Subject: ARM: dts: BCM5301X: Specify MDIO bus in the DT MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Northstar devices have MDIO bus that may contain various PHYs attached. A common example is USB 3.0 PHY (that doesn't have an MDIO driver yet). Signed-off-by: Rafał Miłecki Signed-off-by: Florian Fainelli --- arch/arm/boot/dts/bcm5301x.dtsi | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/bcm5301x.dtsi b/arch/arm/boot/dts/bcm5301x.dtsi index ffcbe49c8f39..98647d22b291 100644 --- a/arch/arm/boot/dts/bcm5301x.dtsi +++ b/arch/arm/boot/dts/bcm5301x.dtsi @@ -320,6 +320,14 @@ }; }; + mdio: mdio@18003000 { + compatible = "brcm,iproc-mdio"; + reg = <0x18003000 0x8>; + #size-cells = <1>; + #address-cells = <0>; + status = "disabled"; + }; + i2c0: i2c@18009000 { compatible = "brcm,iproc-i2c"; reg = <0x18009000 0x50>; -- cgit v1.2.3 From f1494a85e205f6b74ae04d49c446e792b0460301 Mon Sep 17 00:00:00 2001 From: Eric Anholt Date: Tue, 18 Apr 2017 16:32:34 -0700 Subject: ARM: dts: Cygnus: Add BCM11360's V3D device This loads the VC4 driver on the 911360_entphn platform (with the corresponding series sent to dri-devel), which is supported by master of the Mesa tree. Signed-off-by: Eric Anholt Acked-by: Scott Branden Signed-off-by: Florian Fainelli --- arch/arm/boot/dts/bcm-cygnus.dtsi | 13 +++++++++++++ arch/arm/boot/dts/bcm911360_entphn.dts | 8 ++++++++ 2 files changed, 21 insertions(+) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/bcm-cygnus.dtsi b/arch/arm/boot/dts/bcm-cygnus.dtsi index 9644fddb5e3c..5adbf74d2d70 100644 --- a/arch/arm/boot/dts/bcm-cygnus.dtsi +++ b/arch/arm/boot/dts/bcm-cygnus.dtsi @@ -386,6 +386,19 @@ status = "disabled"; }; + v3d: v3d@180a2000 { + compatible = "brcm,cygnus-v3d"; + reg = <0x180a2000 0x1000>; + clocks = <&mipipll BCM_CYGNUS_MIPIPLL_CH2_V3D>; + clock-names = "v3d_clk"; + interrupts = ; + status = "disabled"; + }; + + vc4: gpu { + compatible = "brcm,cygnus-vc4"; + }; + adc: adc@180a6000 { compatible = "brcm,iproc-static-adc"; #io-channel-cells = <1>; diff --git a/arch/arm/boot/dts/bcm911360_entphn.dts b/arch/arm/boot/dts/bcm911360_entphn.dts index 8b3800f46288..037621c13290 100644 --- a/arch/arm/boot/dts/bcm911360_entphn.dts +++ b/arch/arm/boot/dts/bcm911360_entphn.dts @@ -57,6 +57,14 @@ }; }; +&v3d { + assigned-clocks = + <&mipipll BCM_CYGNUS_MIPIPLL>, + <&mipipll BCM_CYGNUS_MIPIPLL_CH2_V3D>; + assigned-clock-rates = <525000000>, <300000000>; + status = "okay"; +}; + &uart3 { status = "okay"; }; -- cgit v1.2.3 From 2896cb55dc6dd11bd9d07ab1f1eca8a6d478c68a Mon Sep 17 00:00:00 2001 From: Jon Mason Date: Fri, 28 Apr 2017 16:11:31 -0400 Subject: ARM: dts: NSP: Add Thermal Support Add thermal support via the ns-thermal driver and create a single thermal zone for the entire SoC. Signed-off-by: Jon Mason Acked-by: Eduardo Valentin Signed-off-by: Florian Fainelli --- arch/arm/boot/dts/bcm-nsp.dtsi | 26 ++++++++++++++++++++++++++ 1 file changed, 26 insertions(+) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/bcm-nsp.dtsi b/arch/arm/boot/dts/bcm-nsp.dtsi index fe6cba994a97..7204d1def23d 100644 --- a/arch/arm/boot/dts/bcm-nsp.dtsi +++ b/arch/arm/boot/dts/bcm-nsp.dtsi @@ -413,6 +413,12 @@ <0x3f408 0x04>; }; + thermal: thermal@3f2c0 { + compatible = "brcm,ns-thermal"; + reg = <0x3f2c0 0x10>; + #thermal-sensor-cells = <0>; + }; + sata_phy: sata_phy@40100 { compatible = "brcm,iproc-nsp-sata-phy"; reg = <0x40100 0x340>; @@ -563,4 +569,24 @@ brcm,pcie-msi-inten; }; }; + + thermal-zones { + cpu-thermal { + polling-delay-passive = <0>; + polling-delay = <1000>; + coefficients = <(-556) 418000>; + thermal-sensors = <&thermal>; + + trips { + cpu-crit { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + + cooling-maps { + }; + }; + }; }; -- cgit v1.2.3 From 40c26d3af60af5c5d1c434465ffd38a42e5d9bb1 Mon Sep 17 00:00:00 2001 From: Eric Anholt Date: Fri, 28 Apr 2017 15:22:04 -0700 Subject: ARM: dts: Cygnus: Add the ethernet switch and ethernet PHY Cygnus has a single amac controller connected to the B53 switch with 2 PHYs. On the BCM911360_EP platform, those two PHYs are connected to the external ethernet jacks. Signed-off-by: Eric Anholt Reviewed-by: Florian Fainelli Signed-off-by: Florian Fainelli --- arch/arm/boot/dts/bcm-cygnus.dtsi | 58 ++++++++++++++++++++++++++++++++++ arch/arm/boot/dts/bcm911360_entphn.dts | 12 +++++++ 2 files changed, 70 insertions(+) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/bcm-cygnus.dtsi b/arch/arm/boot/dts/bcm-cygnus.dtsi index 5adbf74d2d70..bf8c83815753 100644 --- a/arch/arm/boot/dts/bcm-cygnus.dtsi +++ b/arch/arm/boot/dts/bcm-cygnus.dtsi @@ -142,6 +142,55 @@ interrupts = <0>; }; + mdio: mdio@18002000 { + compatible = "brcm,iproc-mdio"; + reg = <0x18002000 0x8>; + #size-cells = <1>; + #address-cells = <0>; + status = "disabled"; + + gphy0: ethernet-phy@0 { + reg = <0>; + }; + + gphy1: ethernet-phy@1 { + reg = <1>; + }; + }; + + switch: switch@18007000 { + compatible = "brcm,bcm11360-srab", "brcm,cygnus-srab"; + reg = <0x18007000 0x1000>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + phy-handle = <&gphy0>; + phy-mode = "rgmii"; + }; + + port@1 { + reg = <1>; + phy-handle = <&gphy1>; + phy-mode = "rgmii"; + }; + + port@8 { + reg = <8>; + label = "cpu"; + ethernet = <ð0>; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; + }; + i2c0: i2c@18008000 { compatible = "brcm,cygnus-iproc-i2c", "brcm,iproc-i2c"; reg = <0x18008000 0x100>; @@ -295,6 +344,15 @@ status = "disabled"; }; + eth0: ethernet@18042000 { + compatible = "brcm,amac"; + reg = <0x18042000 0x1000>, + <0x18110000 0x1000>; + reg-names = "amac_base", "idm_base"; + interrupts = ; + status = "disabled"; + }; + nand: nand@18046000 { compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1"; reg = <0x18046000 0x600>, <0xf8105408 0x600>, diff --git a/arch/arm/boot/dts/bcm911360_entphn.dts b/arch/arm/boot/dts/bcm911360_entphn.dts index 037621c13290..000f5f19215e 100644 --- a/arch/arm/boot/dts/bcm911360_entphn.dts +++ b/arch/arm/boot/dts/bcm911360_entphn.dts @@ -57,6 +57,18 @@ }; }; +ð0 { + status = "okay"; +}; + +&mdio { + status = "okay"; +}; + +&switch { + status = "okay"; +}; + &v3d { assigned-clocks = <&mipipll BCM_CYGNUS_MIPIPLL>, -- cgit v1.2.3 From 1aa1d858f582c7b1c245e8990ab21e1d9d8d00b1 Mon Sep 17 00:00:00 2001 From: Stefan Wahren Date: Sun, 21 May 2017 18:44:36 +0200 Subject: ARM: dts: bcm283x: Add dtsi for OTG mode The Raspberry Pi Zero also supports OTG mode. So provide a dtsi file to configure the USB interface accordingly. The fifo sizes are optimized for device endpoint 6 and 7 with the maximum of 768. Signed-off-by: Stefan Wahren Signed-off-by: Eric Anholt --- arch/arm/boot/dts/bcm283x-rpi-usb-otg.dtsi | 10 ++++++++++ 1 file changed, 10 insertions(+) create mode 100644 arch/arm/boot/dts/bcm283x-rpi-usb-otg.dtsi (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/bcm283x-rpi-usb-otg.dtsi b/arch/arm/boot/dts/bcm283x-rpi-usb-otg.dtsi new file mode 100644 index 000000000000..e7d217c967a1 --- /dev/null +++ b/arch/arm/boot/dts/bcm283x-rpi-usb-otg.dtsi @@ -0,0 +1,10 @@ +&usb { + dr_mode = "otg"; + g-rx-fifo-size = <256>; + g-np-tx-fifo-size = <32>; + /* + * According to dwc2 the sum of all device EP + * fifo sizes shouldn't exceed 3776 bytes. + */ + g-tx-fifo-size = <256 256 512 512 512 768 768>; +}; -- cgit v1.2.3 From 860a5d0b262eb3a98f578ffbd4469723315fd778 Mon Sep 17 00:00:00 2001 From: Stefan Wahren Date: Sun, 21 May 2017 18:44:37 +0200 Subject: ARM: dts: bcm283x: Add generic USB PHY In order to use dwc2 in OTG or gadget mode the USB PHY should be specified. Since there is no bcm283x USB PHY driver use the generic one. Signed-off-by: Stefan Wahren Acked-by: Stephen Warren Signed-off-by: Eric Anholt --- arch/arm/boot/dts/bcm283x.dtsi | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/bcm283x.dtsi b/arch/arm/boot/dts/bcm283x.dtsi index 86a5db53da8f..9a05cde8aced 100644 --- a/arch/arm/boot/dts/bcm283x.dtsi +++ b/arch/arm/boot/dts/bcm283x.dtsi @@ -589,6 +589,8 @@ #size-cells = <0>; clocks = <&clk_usb>; clock-names = "otg"; + phys = <&usbphy>; + phy-names = "usb2-phy"; }; v3d: v3d@7ec00000 { @@ -624,4 +626,8 @@ clock-frequency = <480000000>; }; }; + + usbphy: phy { + compatible = "usb-nop-xceiv"; + }; }; -- cgit v1.2.3 From 9c53535a15b63218204f2bab2c279b3e64c61c0e Mon Sep 17 00:00:00 2001 From: Stefan Wahren Date: Sun, 21 May 2017 18:44:38 +0200 Subject: ARM: dts: bcm2835-rpi-zero: Enable OTG mode Since 635c21068cf ("usb: dwc2: gadget: Fix WARN_ON messages during FIFO init") the dwc2 driver is able to handle OTG and gadget mode for bcm2835. So enable this feature for the Raspberry Pi Zero. Signed-off-by: Stefan Wahren Signed-off-by: Eric Anholt --- arch/arm/boot/dts/bcm2835-rpi-zero.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/bcm2835-rpi-zero.dts b/arch/arm/boot/dts/bcm2835-rpi-zero.dts index cc8b832c4c78..79a20d520931 100644 --- a/arch/arm/boot/dts/bcm2835-rpi-zero.dts +++ b/arch/arm/boot/dts/bcm2835-rpi-zero.dts @@ -12,7 +12,7 @@ /dts-v1/; #include "bcm2835.dtsi" #include "bcm2835-rpi.dtsi" -#include "bcm283x-rpi-usb-host.dtsi" +#include "bcm283x-rpi-usb-otg.dtsi" / { compatible = "raspberrypi,model-zero", "brcm,bcm2835"; -- cgit v1.2.3 From b5db9dedc5584bf473566b9cf5c941d3ab6258db Mon Sep 17 00:00:00 2001 From: Stephen Warren Date: Thu, 13 Apr 2017 12:55:58 -0600 Subject: ARM: tegra: remove Whistler support Whistler is an ancient Tegra 2 reference board. I may have been the only person who ever used it with upstream software, and I've just recycled the board hardware. Hence, it makes sense to remove support from software. Signed-off-by: Stephen Warren Acked-by: Mark Brown Signed-off-by: Thierry Reding --- Documentation/devicetree/bindings/arm/tegra.txt | 1 - arch/arm/boot/dts/Makefile | 3 +- arch/arm/boot/dts/tegra20-whistler.dts | 636 ------------------------ 3 files changed, 1 insertion(+), 639 deletions(-) delete mode 100644 arch/arm/boot/dts/tegra20-whistler.dts (limited to 'arch/arm/boot') diff --git a/Documentation/devicetree/bindings/arm/tegra.txt b/Documentation/devicetree/bindings/arm/tegra.txt index b5a4342c1d46..7f1411bbabf7 100644 --- a/Documentation/devicetree/bindings/arm/tegra.txt +++ b/Documentation/devicetree/bindings/arm/tegra.txt @@ -29,7 +29,6 @@ board-specific compatible values: nvidia,harmony nvidia,seaboard nvidia,ventana - nvidia,whistler toradex,apalis_t30 toradex,apalis_t30-eval toradex,apalis-tk1 diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 9c5e1d944d1c..04d3b46d3646 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -920,8 +920,7 @@ dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += \ tegra20-seaboard.dtb \ tegra20-tec.dtb \ tegra20-trimslice.dtb \ - tegra20-ventana.dtb \ - tegra20-whistler.dtb + tegra20-ventana.dtb dtb-$(CONFIG_ARCH_TEGRA_3x_SOC) += \ tegra30-apalis-eval.dtb \ tegra30-beaver.dtb \ diff --git a/arch/arm/boot/dts/tegra20-whistler.dts b/arch/arm/boot/dts/tegra20-whistler.dts deleted file mode 100644 index 1e06f854c8b4..000000000000 --- a/arch/arm/boot/dts/tegra20-whistler.dts +++ /dev/null @@ -1,636 +0,0 @@ -/dts-v1/; - -#include -#include "tegra20.dtsi" - -/ { - model = "NVIDIA Tegra20 Whistler evaluation board"; - compatible = "nvidia,whistler", "nvidia,tegra20"; - - aliases { - rtc0 = "/i2c@7000d000/max8907@3c"; - rtc1 = "/rtc@7000e000"; - serial0 = &uarta; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - memory { - reg = <0x00000000 0x20000000>; - }; - - host1x@50000000 { - hdmi@54280000 { - status = "okay"; - - vdd-supply = <&hdmi_vdd_reg>; - pll-supply = <&hdmi_pll_reg>; - - nvidia,ddc-i2c-bus = <&hdmi_ddc>; - nvidia,hpd-gpio = <&gpio TEGRA_GPIO(N, 7) - GPIO_ACTIVE_HIGH>; - }; - }; - - pinmux@70000014 { - pinctrl-names = "default"; - pinctrl-0 = <&state_default>; - - state_default: pinmux { - ata { - nvidia,pins = "ata", "atb", "ate", "gma", "gmb", - "gmc", "gmd", "gpu"; - nvidia,function = "gmi"; - }; - atc { - nvidia,pins = "atc", "atd"; - nvidia,function = "sdio4"; - }; - cdev1 { - nvidia,pins = "cdev1"; - nvidia,function = "plla_out"; - }; - cdev2 { - nvidia,pins = "cdev2"; - nvidia,function = "osc"; - }; - crtp { - nvidia,pins = "crtp"; - nvidia,function = "crt"; - }; - csus { - nvidia,pins = "csus"; - nvidia,function = "vi_sensor_clk"; - }; - dap1 { - nvidia,pins = "dap1"; - nvidia,function = "dap1"; - }; - dap2 { - nvidia,pins = "dap2"; - nvidia,function = "dap2"; - }; - dap3 { - nvidia,pins = "dap3"; - nvidia,function = "dap3"; - }; - dap4 { - nvidia,pins = "dap4"; - nvidia,function = "dap4"; - }; - ddc { - nvidia,pins = "ddc"; - nvidia,function = "i2c2"; - }; - dta { - nvidia,pins = "dta", "dtb", "dtc", "dtd"; - nvidia,function = "vi"; - }; - dte { - nvidia,pins = "dte"; - nvidia,function = "rsvd1"; - }; - dtf { - nvidia,pins = "dtf"; - nvidia,function = "i2c3"; - }; - gme { - nvidia,pins = "gme"; - nvidia,function = "dap5"; - }; - gpu7 { - nvidia,pins = "gpu7"; - nvidia,function = "rtck"; - }; - gpv { - nvidia,pins = "gpv"; - nvidia,function = "pcie"; - }; - hdint { - nvidia,pins = "hdint", "pta"; - nvidia,function = "hdmi"; - }; - i2cp { - nvidia,pins = "i2cp"; - nvidia,function = "i2cp"; - }; - irrx { - nvidia,pins = "irrx", "irtx"; - nvidia,function = "uartb"; - }; - kbca { - nvidia,pins = "kbca", "kbcc", "kbce", "kbcf"; - nvidia,function = "kbc"; - }; - kbcb { - nvidia,pins = "kbcb", "kbcd"; - nvidia,function = "sdio2"; - }; - lcsn { - nvidia,pins = "lcsn", "lsck", "lsda", "lsdi", - "spia", "spib", "spic"; - nvidia,function = "spi3"; - }; - ld0 { - nvidia,pins = "ld0", "ld1", "ld2", "ld3", "ld4", - "ld5", "ld6", "ld7", "ld8", "ld9", - "ld10", "ld11", "ld12", "ld13", "ld14", - "ld15", "ld16", "ld17", "ldc", "ldi", - "lhp0", "lhp1", "lhp2", "lhs", "lm0", - "lm1", "lpp", "lpw0", "lpw1", "lpw2", - "lsc0", "lsc1", "lspi", "lvp0", "lvp1", - "lvs"; - nvidia,function = "displaya"; - }; - owc { - nvidia,pins = "owc", "uac"; - nvidia,function = "owr"; - }; - pmc { - nvidia,pins = "pmc"; - nvidia,function = "pwr_on"; - }; - rm { - nvidia,pins = "rm"; - nvidia,function = "i2c1"; - }; - sdb { - nvidia,pins = "sdb", "sdc", "sdd", "slxa", - "slxc", "slxd", "slxk"; - nvidia,function = "sdio3"; - }; - sdio1 { - nvidia,pins = "sdio1"; - nvidia,function = "sdio1"; - }; - spdi { - nvidia,pins = "spdi", "spdo"; - nvidia,function = "rsvd2"; - }; - spid { - nvidia,pins = "spid", "spie", "spig", "spih"; - nvidia,function = "spi2_alt"; - }; - spif { - nvidia,pins = "spif"; - nvidia,function = "spi2"; - }; - uaa { - nvidia,pins = "uaa", "uab"; - nvidia,function = "uarta"; - }; - uad { - nvidia,pins = "uad"; - nvidia,function = "irda"; - }; - uca { - nvidia,pins = "uca", "ucb"; - nvidia,function = "uartc"; - }; - uda { - nvidia,pins = "uda"; - nvidia,function = "spi1"; - }; - conf_ata { - nvidia,pins = "ata", "atb", "atc", "ddc", "gma", - "gmb", "gmc", "gmd", "irrx", "irtx", - "kbca", "kbcb", "kbcc", "kbcd", "kbce", - "kbcf", "sdc", "sdd", "spie", "spig", - "spih", "uaa", "uab", "uad", "uca", - "ucb"; - nvidia,pull = ; - nvidia,tristate = ; - }; - conf_atd { - nvidia,pins = "atd", "ate", "cdev1", "csus", - "dap1", "dap2", "dap3", "dap4", "dte", - "dtf", "gpu", "gpu7", "gpv", "i2cp", - "rm", "sdio1", "slxa", "slxc", "slxd", - "slxk", "spdi", "spdo", "uac", "uda"; - nvidia,pull = ; - nvidia,tristate = ; - }; - conf_cdev2 { - nvidia,pins = "cdev2", "spia", "spib"; - nvidia,pull = ; - nvidia,tristate = ; - }; - conf_ck32 { - nvidia,pins = "ck32", "ddrc", "lc", "pmca", - "pmcb", "pmcc", "pmcd", "xm2c", - "xm2d"; - nvidia,pull = ; - }; - conf_crtp { - nvidia,pins = "crtp"; - nvidia,pull = ; - nvidia,tristate = ; - }; - conf_dta { - nvidia,pins = "dta", "dtb", "dtc", "dtd", - "spid", "spif"; - nvidia,pull = ; - nvidia,tristate = ; - }; - conf_gme { - nvidia,pins = "gme", "owc", "pta", "spic"; - nvidia,pull = ; - nvidia,tristate = ; - }; - conf_ld17_0 { - nvidia,pins = "ld17_0", "ld19_18", "ld21_20", - "ld23_22"; - nvidia,pull = ; - }; - conf_ls { - nvidia,pins = "ls", "pmce"; - nvidia,pull = ; - }; - drive_dap1 { - nvidia,pins = "drive_dap1"; - nvidia,high-speed-mode = ; - nvidia,schmitt = ; - nvidia,low-power-mode = ; - nvidia,pull-down-strength = <0>; - nvidia,pull-up-strength = <0>; - nvidia,slew-rate-rising = ; - nvidia,slew-rate-falling = ; - }; - }; - }; - - i2s@70002800 { - status = "okay"; - }; - - serial@70006000 { - status = "okay"; - }; - - hdmi_ddc: i2c@7000c400 { - status = "okay"; - clock-frequency = <100000>; - }; - - i2c@7000d000 { - status = "okay"; - clock-frequency = <100000>; - - codec: codec@1a { - compatible = "wlf,wm8753"; - reg = <0x1a>; - }; - - tca6416: gpio@20 { - compatible = "ti,tca6416"; - reg = <0x20>; - gpio-controller; - #gpio-cells = <2>; - }; - - max8907@3c { - compatible = "maxim,max8907"; - reg = <0x3c>; - interrupts = ; - - maxim,system-power-controller; - - mbatt-supply = <&usb0_vbus_reg>; - in-v1-supply = <&mbatt_reg>; - in-v2-supply = <&mbatt_reg>; - in-v3-supply = <&mbatt_reg>; - in1-supply = <&mbatt_reg>; - in2-supply = <&nvvdd_sv3_reg>; - in3-supply = <&mbatt_reg>; - in4-supply = <&mbatt_reg>; - in5-supply = <&mbatt_reg>; - in6-supply = <&mbatt_reg>; - in7-supply = <&mbatt_reg>; - in8-supply = <&mbatt_reg>; - in9-supply = <&mbatt_reg>; - in10-supply = <&mbatt_reg>; - in11-supply = <&mbatt_reg>; - in12-supply = <&mbatt_reg>; - in13-supply = <&mbatt_reg>; - in14-supply = <&mbatt_reg>; - in15-supply = <&mbatt_reg>; - in16-supply = <&mbatt_reg>; - in17-supply = <&nvvdd_sv3_reg>; - in18-supply = <&nvvdd_sv3_reg>; - in19-supply = <&mbatt_reg>; - in20-supply = <&mbatt_reg>; - - regulators { - mbatt_reg: mbatt { - regulator-name = "vbat_pmu"; - regulator-always-on; - }; - - sd1 { - regulator-name = "nvvdd_sv1,vdd_cpu_pmu"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-always-on; - }; - - sd2 { - regulator-name = "nvvdd_sv2,vdd_core"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-always-on; - }; - - nvvdd_sv3_reg: sd3 { - regulator-name = "nvvdd_sv3"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - ldo1 { - regulator-name = "nvvdd_ldo1,vddio_rx_ddr,vcore_acc"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - ldo2 { - regulator-name = "nvvdd_ldo2,avdd_pll*"; - regulator-min-microvolt = <1100000>; - regulator-max-microvolt = <1100000>; - regulator-always-on; - }; - - ldo3 { - regulator-name = "nvvdd_ldo3,vcom_1v8b"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - ldo4 { - regulator-name = "nvvdd_ldo4,avdd_usb*"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - ldo5 { - regulator-name = "nvvdd_ldo5,vcore_mmc,avdd_lcd1,vddio_1wire"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - regulator-always-on; - }; - - hdmi_pll_reg: ldo6 { - regulator-name = "nvvdd_ldo6,avdd_hdmi_pll"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - ldo7 { - regulator-name = "nvvdd_ldo7,avddio_audio"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - regulator-always-on; - }; - - ldo8 { - regulator-name = "nvvdd_ldo8,vcom_3v0,vcore_cmps"; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - }; - - ldo9 { - regulator-name = "nvvdd_ldo9,avdd_cam*"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - }; - - ldo10 { - regulator-name = "nvvdd_ldo10,avdd_usb_ic_3v0"; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-always-on; - }; - - hdmi_vdd_reg: ldo11 { - regulator-name = "nvvdd_ldo11,vddio_pex_clk,vcom_33,avdd_hdmi"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - ldo12 { - regulator-name = "nvvdd_ldo12,vddio_sdio"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - regulator-always-on; - }; - - ldo13 { - regulator-name = "nvvdd_ldo13,vcore_phtn,vdd_af"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - }; - - ldo14 { - regulator-name = "nvvdd_ldo14,avdd_vdac"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - }; - - ldo15 { - regulator-name = "nvvdd_ldo15,vcore_temp,vddio_hdcp"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - ldo16 { - regulator-name = "nvvdd_ldo16,vdd_dbrtr"; - regulator-min-microvolt = <1300000>; - regulator-max-microvolt = <1300000>; - }; - - ldo17 { - regulator-name = "nvvdd_ldo17,vddio_mipi"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - - ldo18 { - regulator-name = "nvvdd_ldo18,vddio_vi,vcore_cam*"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - ldo19 { - regulator-name = "nvvdd_ldo19,avdd_lcd2,vddio_lx"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - }; - - ldo20 { - regulator-name = "nvvdd_ldo20,vddio_ddr_1v2,vddio_hsic,vcom_1v2"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-always-on; - }; - - out5v { - regulator-name = "usb0_vbus_reg"; - }; - - out33v { - regulator-name = "pmu_out3v3"; - }; - - bbat { - regulator-name = "pmu_bbat"; - regulator-min-microvolt = <2400000>; - regulator-max-microvolt = <2400000>; - regulator-always-on; - }; - - sdby { - regulator-name = "vdd_aon"; - regulator-always-on; - }; - - vrtc { - regulator-name = "vrtc,pmu_vccadc"; - regulator-always-on; - }; - }; - }; - }; - - kbc@7000e200 { - status = "okay"; - nvidia,debounce-delay-ms = <20>; - nvidia,repeat-delay-ms = <160>; - nvidia,kbc-row-pins = <0 1 2>; - nvidia,kbc-col-pins = <16 17>; - wakeup-source; - linux,keymap = ; - }; - - pmc@7000e400 { - nvidia,invert-interrupt; - nvidia,suspend-mode = <1>; - nvidia,cpu-pwr-good-time = <2000>; - nvidia,cpu-pwr-off-time = <1000>; - nvidia,core-pwr-good-time = <0 3845>; - nvidia,core-pwr-off-time = <93727>; - nvidia,core-power-req-active-high; - nvidia,sys-clock-req-active-high; - nvidia,combined-power-req; - }; - - usb@c5000000 { - status = "okay"; - }; - - usb-phy@c5000000 { - status = "okay"; - vbus-supply = <&vbus1_reg>; - }; - - usb@c5008000 { - status = "okay"; - }; - - usb-phy@c5008000 { - status = "okay"; - vbus-supply = <&vbus3_reg>; - }; - - sdhci@c8000400 { - status = "okay"; - cd-gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>; - wp-gpios = <&gpio TEGRA_GPIO(V, 5) GPIO_ACTIVE_HIGH>; - bus-width = <8>; - }; - - sdhci@c8000600 { - status = "okay"; - bus-width = <8>; - non-removable; - }; - - clocks { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - clk32k_in: clock@0 { - compatible = "fixed-clock"; - reg = <0>; - #clock-cells = <0>; - clock-frequency = <32768>; - }; - }; - - regulators { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - usb0_vbus_reg: regulator@0 { - compatible = "regulator-fixed"; - reg = <0>; - regulator-name = "usb0_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - }; - - vbus1_reg: regulator@2 { - compatible = "regulator-fixed"; - reg = <2>; - regulator-name = "vbus1"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - enable-active-high; - gpio = <&tca6416 0 0>; /* GPIO_PMU0 */ - regulator-always-on; - regulator-boot-on; - }; - - vbus3_reg: regulator@3 { - compatible = "regulator-fixed"; - reg = <3>; - regulator-name = "vbus3"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - enable-active-high; - gpio = <&tca6416 1 0>; /* GPIO_PMU1 */ - regulator-always-on; - regulator-boot-on; - }; - }; - - sound { - compatible = "nvidia,tegra-audio-wm8753-whistler", - "nvidia,tegra-audio-wm8753"; - nvidia,model = "NVIDIA Tegra Whistler"; - - nvidia,audio-routing = - "Headphone Jack", "LOUT1", - "Headphone Jack", "ROUT1", - "MIC2", "Mic Jack", - "MIC2N", "Mic Jack"; - - nvidia,i2s-controller = <&tegra_i2s1>; - nvidia,audio-codec = <&codec>; - - clocks = <&tegra_car TEGRA20_CLK_PLL_A>, - <&tegra_car TEGRA20_CLK_PLL_A_OUT0>, - <&tegra_car TEGRA20_CLK_CDEV1>; - clock-names = "pll_a", "pll_a_out0", "mclk"; - }; -}; -- cgit v1.2.3 From 508d690e94218d306ab2092d6ee95ca75f9fa98b Mon Sep 17 00:00:00 2001 From: Rob Herring Date: Tue, 21 Mar 2017 21:03:06 -0500 Subject: ARM: dts: tegra: fix PCI bus dtc warnings dtc recently added PCI bus checks. Fix these warnings. Signed-off-by: Rob Herring Cc: Stephen Warren Cc: Thierry Reding Cc: Alexandre Courbot Cc: linux-tegra@vger.kernel.org Signed-off-by: Thierry Reding --- arch/arm/boot/dts/tegra124-apalis-eval.dts | 2 +- arch/arm/boot/dts/tegra124-apalis.dtsi | 2 +- arch/arm/boot/dts/tegra124-jetson-tk1.dts | 2 +- arch/arm/boot/dts/tegra124.dtsi | 4 +++- arch/arm/boot/dts/tegra20-harmony.dts | 2 +- arch/arm/boot/dts/tegra20-tamonten.dtsi | 2 +- arch/arm/boot/dts/tegra20-tec.dts | 2 +- arch/arm/boot/dts/tegra20-trimslice.dts | 2 +- arch/arm/boot/dts/tegra20.dtsi | 4 +++- arch/arm/boot/dts/tegra30-apalis-eval.dts | 2 +- arch/arm/boot/dts/tegra30-apalis.dtsi | 2 +- arch/arm/boot/dts/tegra30-beaver.dts | 2 +- arch/arm/boot/dts/tegra30-cardhu.dtsi | 2 +- arch/arm/boot/dts/tegra30.dtsi | 5 ++++- 14 files changed, 21 insertions(+), 14 deletions(-) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/tegra124-apalis-eval.dts b/arch/arm/boot/dts/tegra124-apalis-eval.dts index 5b860ad5cbee..ecffcd115fa7 100644 --- a/arch/arm/boot/dts/tegra124-apalis-eval.dts +++ b/arch/arm/boot/dts/tegra124-apalis-eval.dts @@ -63,7 +63,7 @@ stdout-path = "serial0:115200n8"; }; - pcie-controller@01003000 { + pcie@1003000 { pci@1,0 { status = "okay"; }; diff --git a/arch/arm/boot/dts/tegra124-apalis.dtsi b/arch/arm/boot/dts/tegra124-apalis.dtsi index f9e623bdd5c3..5d9b18ef5af6 100644 --- a/arch/arm/boot/dts/tegra124-apalis.dtsi +++ b/arch/arm/boot/dts/tegra124-apalis.dtsi @@ -54,7 +54,7 @@ reg = <0x0 0x80000000 0x0 0x80000000>; }; - pcie-controller@01003000 { + pcie@1003000 { status = "okay"; avddio-pex-supply = <&vdd_1v05>; diff --git a/arch/arm/boot/dts/tegra124-jetson-tk1.dts b/arch/arm/boot/dts/tegra124-jetson-tk1.dts index 53994f9fbbcc..7bacb2954f58 100644 --- a/arch/arm/boot/dts/tegra124-jetson-tk1.dts +++ b/arch/arm/boot/dts/tegra124-jetson-tk1.dts @@ -27,7 +27,7 @@ reg = <0x0 0x80000000 0x0 0x80000000>; }; - pcie-controller@01003000 { + pcie@1003000 { status = "okay"; avddio-pex-supply = <&vdd_1v05_run>; diff --git a/arch/arm/boot/dts/tegra124.dtsi b/arch/arm/boot/dts/tegra124.dtsi index 187a36c6d0fc..1b10b14a6abd 100644 --- a/arch/arm/boot/dts/tegra124.dtsi +++ b/arch/arm/boot/dts/tegra124.dtsi @@ -14,7 +14,7 @@ #address-cells = <2>; #size-cells = <2>; - pcie-controller@01003000 { + pcie@1003000 { compatible = "nvidia,tegra124-pcie"; device_type = "pci"; reg = <0x0 0x01003000 0x0 0x00000800 /* PADS registers */ @@ -54,6 +54,7 @@ device_type = "pci"; assigned-addresses = <0x82000800 0 0x01000000 0 0x1000>; reg = <0x000800 0 0 0 0>; + bus-range = <0x00 0xff>; status = "disabled"; #address-cells = <3>; @@ -67,6 +68,7 @@ device_type = "pci"; assigned-addresses = <0x82001000 0 0x01001000 0 0x1000>; reg = <0x001000 0 0 0 0>; + bus-range = <0x00 0xff>; status = "disabled"; #address-cells = <3>; diff --git a/arch/arm/boot/dts/tegra20-harmony.dts b/arch/arm/boot/dts/tegra20-harmony.dts index d4fb4d39ede7..41749693ec3c 100644 --- a/arch/arm/boot/dts/tegra20-harmony.dts +++ b/arch/arm/boot/dts/tegra20-harmony.dts @@ -566,7 +566,7 @@ nvidia,sys-clock-req-active-high; }; - pcie-controller@80003000 { + pcie@80003000 { status = "okay"; avdd-pex-supply = <&pci_vdd_reg>; diff --git a/arch/arm/boot/dts/tegra20-tamonten.dtsi b/arch/arm/boot/dts/tegra20-tamonten.dtsi index 27d2bbbf1eae..7361f4a82e80 100644 --- a/arch/arm/boot/dts/tegra20-tamonten.dtsi +++ b/arch/arm/boot/dts/tegra20-tamonten.dtsi @@ -478,7 +478,7 @@ nvidia,sys-clock-req-active-high; }; - pcie-controller@80003000 { + pcie@80003000 { avdd-pex-supply = <&pci_vdd_reg>; vdd-pex-supply = <&pci_vdd_reg>; avdd-pex-pll-supply = <&pci_vdd_reg>; diff --git a/arch/arm/boot/dts/tegra20-tec.dts b/arch/arm/boot/dts/tegra20-tec.dts index c12d8bead2ee..9cb534f4441e 100644 --- a/arch/arm/boot/dts/tegra20-tec.dts +++ b/arch/arm/boot/dts/tegra20-tec.dts @@ -32,7 +32,7 @@ }; }; - pcie-controller@80003000 { + pcie@80003000 { status = "okay"; pci@1,0 { diff --git a/arch/arm/boot/dts/tegra20-trimslice.dts b/arch/arm/boot/dts/tegra20-trimslice.dts index 87b07fbadbbe..b902ab594afa 100644 --- a/arch/arm/boot/dts/tegra20-trimslice.dts +++ b/arch/arm/boot/dts/tegra20-trimslice.dts @@ -321,7 +321,7 @@ nvidia,sys-clock-req-active-high; }; - pcie-controller@80003000 { + pcie@80003000 { status = "okay"; avdd-pex-supply = <&pci_vdd_reg>; diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi index e8807503f87c..7c85f97f72ea 100644 --- a/arch/arm/boot/dts/tegra20.dtsi +++ b/arch/arm/boot/dts/tegra20.dtsi @@ -586,7 +586,7 @@ reset-names = "fuse"; }; - pcie-controller@80003000 { + pcie@80003000 { compatible = "nvidia,tegra20-pcie"; device_type = "pci"; reg = <0x80003000 0x00000800 /* PADS registers */ @@ -625,6 +625,7 @@ device_type = "pci"; assigned-addresses = <0x82000800 0 0x80000000 0 0x1000>; reg = <0x000800 0 0 0 0>; + bus-range = <0x00 0xff>; status = "disabled"; #address-cells = <3>; @@ -638,6 +639,7 @@ device_type = "pci"; assigned-addresses = <0x82001000 0 0x80001000 0 0x1000>; reg = <0x001000 0 0 0 0>; + bus-range = <0x00 0xff>; status = "disabled"; #address-cells = <3>; diff --git a/arch/arm/boot/dts/tegra30-apalis-eval.dts b/arch/arm/boot/dts/tegra30-apalis-eval.dts index 99a69457dbf5..fc530e4a96c4 100644 --- a/arch/arm/boot/dts/tegra30-apalis-eval.dts +++ b/arch/arm/boot/dts/tegra30-apalis-eval.dts @@ -21,7 +21,7 @@ stdout-path = "serial0:115200n8"; }; - pcie-controller@00003000 { + pcie@3000 { status = "okay"; pci@1,0 { diff --git a/arch/arm/boot/dts/tegra30-apalis.dtsi b/arch/arm/boot/dts/tegra30-apalis.dtsi index f6c7c3e958ac..7a6a1a014603 100644 --- a/arch/arm/boot/dts/tegra30-apalis.dtsi +++ b/arch/arm/boot/dts/tegra30-apalis.dtsi @@ -9,7 +9,7 @@ model = "Toradex Apalis T30"; compatible = "toradex,apalis_t30", "nvidia,tegra30"; - pcie-controller@00003000 { + pcie@3000 { avdd-pexa-supply = <&vdd2_reg>; vdd-pexa-supply = <&vdd2_reg>; avdd-pexb-supply = <&vdd2_reg>; diff --git a/arch/arm/boot/dts/tegra30-beaver.dts b/arch/arm/boot/dts/tegra30-beaver.dts index 0350002849d5..4f41b18d9547 100644 --- a/arch/arm/boot/dts/tegra30-beaver.dts +++ b/arch/arm/boot/dts/tegra30-beaver.dts @@ -20,7 +20,7 @@ reg = <0x80000000 0x7ff00000>; }; - pcie-controller@00003000 { + pcie@3000 { status = "okay"; avdd-pexa-supply = <&ldo1_reg>; diff --git a/arch/arm/boot/dts/tegra30-cardhu.dtsi b/arch/arm/boot/dts/tegra30-cardhu.dtsi index f11012bb58cc..83dc14a9b353 100644 --- a/arch/arm/boot/dts/tegra30-cardhu.dtsi +++ b/arch/arm/boot/dts/tegra30-cardhu.dtsi @@ -43,7 +43,7 @@ reg = <0x80000000 0x40000000>; }; - pcie-controller@00003000 { + pcie@3000 { status = "okay"; /* AVDD_PEXA and VDD_PEXA inputs are grounded on Cardhu. */ diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi index bbb1c002e7f1..13960fda7471 100644 --- a/arch/arm/boot/dts/tegra30.dtsi +++ b/arch/arm/boot/dts/tegra30.dtsi @@ -10,7 +10,7 @@ compatible = "nvidia,tegra30"; interrupt-parent = <&lic>; - pcie-controller@00003000 { + pcie@3000 { compatible = "nvidia,tegra30-pcie"; device_type = "pci"; reg = <0x00003000 0x00000800 /* PADS registers */ @@ -51,6 +51,7 @@ device_type = "pci"; assigned-addresses = <0x82000800 0 0x00000000 0 0x1000>; reg = <0x000800 0 0 0 0>; + bus-range = <0x00 0xff>; status = "disabled"; #address-cells = <3>; @@ -64,6 +65,7 @@ device_type = "pci"; assigned-addresses = <0x82001000 0 0x00001000 0 0x1000>; reg = <0x001000 0 0 0 0>; + bus-range = <0x00 0xff>; status = "disabled"; #address-cells = <3>; @@ -77,6 +79,7 @@ device_type = "pci"; assigned-addresses = <0x82001800 0 0x00004000 0 0x1000>; reg = <0x001800 0 0 0 0>; + bus-range = <0x00 0xff>; status = "disabled"; #address-cells = <3>; -- cgit v1.2.3 From cff94887d55a32bf8f7095482d9ba92784280a5c Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Mon, 15 May 2017 09:50:34 +0200 Subject: ARM: dts: add core I2C devices to the APQ8060 Dragonboard The APQ8060 Dragonboard has an Atmel AT24c128 EEPROM and a Wolfson Micro WM8903 codec connected to its GSBI8 I2C bus. Add entries for these to the device tree. The interrupt line from the WM8903 chip is not routed anywhere on this design so it can not be used. Signed-off-by: Linus Walleij Acked-by: Bjorn Andersson Signed-off-by: Andy Gross --- arch/arm/boot/dts/qcom-apq8060-dragonboard.dts | 49 ++++++++++++++++++++++++++ 1 file changed, 49 insertions(+) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts b/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts index 5225e489ef52..9d725f983282 100644 --- a/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts +++ b/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts @@ -180,6 +180,19 @@ }; }; + dragon_gsbi8_i2c_pins: gsbi8_i2c { + mux { + pins = "gpio64", "gpio65"; + function = "gsbi8"; + }; + pinconf { + pins = "gpio64", "gpio65"; + drive-strength = <16>; + /* These have external pull-up 2.2kOhm to 1.8V */ + bias-disable; + }; + }; + dragon_gsbi12_i2c_pins: gsbi12_i2c { mux { pins = "gpio115", "gpio116"; @@ -448,6 +461,42 @@ }; }; + gsbi@19800000 { + status = "ok"; + qcom,mode = ; + + i2c@19880000 { + status = "ok"; + pinctrl-names = "default"; + pinctrl-0 = <&dragon_gsbi8_i2c_pins>; + + eeprom@52 { + /* A 16KiB Platform ID EEPROM on the CPU carrier board */ + compatible = "atmel,24c128"; + reg = <0x52>; + vcc-supply = <&pm8058_s3>; + pagesize = <64>; + }; + wm8903: wm8903@1a { + /* This Woolfson Micro device has an unrouted interrupt line */ + compatible = "wlf,wm8903"; + reg = <0x1a>; + + AVDD-supply = <&pm8058_l16>; + CPVDD-supply = <&pm8058_l16>; + DBVDD-supply = <&pm8058_s3>; + DCVDD-supply = <&pm8058_l0>; + + gpio-controller; + #gpio-cells = <2>; + + micdet-cfg = <0>; + micdet-delay = <100>; + gpio-cfg = <0xffffffff 0xffffffff 0 0xffffffff 0xffffffff>; + }; + }; + }; + gsbi@19c00000 { status = "ok"; qcom,mode = ; -- cgit v1.2.3 From 9eeb02247723c2ce881319368ce22982f1c7b1ef Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Sat, 1 Apr 2017 19:55:48 +0200 Subject: ARM: dts: Add Gemini DMA controller This adds the Faraday Technology FTDMAC020 DMA controller to the Gemini SoC DTSI file. It is only used for memcpy work so we can activate it for all users of the chipset. Signed-off-by: Linus Walleij --- arch/arm/boot/dts/gemini.dtsi | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/gemini.dtsi b/arch/arm/boot/dts/gemini.dtsi index 80abf84f8a80..0beaa4ef757e 100644 --- a/arch/arm/boot/dts/gemini.dtsi +++ b/arch/arm/boot/dts/gemini.dtsi @@ -175,5 +175,22 @@ #interrupt-cells = <1>; }; }; + + dma-controller@67000000 { + compatible = "faraday,ftdma020", "arm,pl080", "arm,primecell"; + /* Faraday Technology FTDMAC020 variant */ + arm,primecell-periphid = <0x0003b080>; + reg = <0x67000000 0x1000>; + interrupts = <9 IRQ_TYPE_EDGE_RISING>; + resets = <&syscon 10>; + clocks = <&syscon 1>; + clock-names = "apb_pclk"; + /* Bus interface AHB1 (AHB0) is totally tilted */ + lli-bus-interface-ahb2; + mem-bus-interface-ahb2; + memcpy-burst-size = <256>; + memcpy-bus-width = <32>; + #dma-cells = <2>; + }; }; }; -- cgit v1.2.3 From 0d7a2c35d11e974b98a6396cd24b39b0f3f5bb7b Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Mon, 20 Mar 2017 23:39:26 +0100 Subject: ARM: dts: add Gemini PATA/SATA support The NAS4229B and SQ201 Gemini systems have a PATA controller which is linked to a SATA bridge in the SoC. Enable both platforms to use the PATA/SATA devices. Cc: John Feng-Hsin Chiang Cc: Greentime Hu Acked-by: Hans Ulli Kroll Signed-off-by: Linus Walleij --- arch/arm/boot/dts/gemini-nas4220b.dts | 10 ++++++++++ arch/arm/boot/dts/gemini-sq201.dts | 10 ++++++++++ arch/arm/boot/dts/gemini.dtsi | 35 +++++++++++++++++++++++++++++++++++ 3 files changed, 55 insertions(+) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/gemini-nas4220b.dts b/arch/arm/boot/dts/gemini-nas4220b.dts index 7668ba52158e..55f6a4f1f801 100644 --- a/arch/arm/boot/dts/gemini-nas4220b.dts +++ b/arch/arm/boot/dts/gemini-nas4220b.dts @@ -98,5 +98,15 @@ read-only; }; }; + + sata: sata@46000000 { + cortina,gemini-ata-muxmode = <0>; + cortina,gemini-enable-sata-bridge; + status = "okay"; + }; + + ata@63000000 { + status = "okay"; + }; }; }; diff --git a/arch/arm/boot/dts/gemini-sq201.dts b/arch/arm/boot/dts/gemini-sq201.dts index 46309e79cc7b..4d200f0bcd45 100644 --- a/arch/arm/boot/dts/gemini-sq201.dts +++ b/arch/arm/boot/dts/gemini-sq201.dts @@ -93,6 +93,12 @@ }; }; + sata: sata@46000000 { + cortina,gemini-ata-muxmode = <0>; + cortina,gemini-enable-sata-bridge; + status = "okay"; + }; + pci@50000000 { status = "okay"; interrupt-map-mask = <0xf800 0 0 7>; @@ -114,5 +120,9 @@ <0x6000 0 0 3 &pci_intc 1>, <0x6000 0 0 4 &pci_intc 2>; }; + + ata@63000000 { + status = "okay"; + }; }; }; diff --git a/arch/arm/boot/dts/gemini.dtsi b/arch/arm/boot/dts/gemini.dtsi index 0beaa4ef757e..141d8d3a1d07 100644 --- a/arch/arm/boot/dts/gemini.dtsi +++ b/arch/arm/boot/dts/gemini.dtsi @@ -81,6 +81,19 @@ clock-names = "PCLK", "EXTCLK"; }; + sata: sata@46000000 { + compatible = "cortina,gemini-sata-bridge"; + reg = <0x46000000 0x100>; + resets = <&syscon 26>, + <&syscon 27>; + reset-names = "sata0", "sata1"; + clocks = <&syscon 10>, + <&syscon 11>; + clock-names = "SATA0_PCLK", "SATA1_PCLK"; + syscon = <&syscon>; + status = "disabled"; + }; + intcon: interrupt-controller@48000000 { compatible = "faraday,ftintc010"; reg = <0x48000000 0x1000>; @@ -176,6 +189,28 @@ }; }; + ata@63000000 { + compatible = "cortina,gemini-pata", "faraday,ftide010"; + reg = <0x63000000 0x1000>; + interrupts = <4 IRQ_TYPE_EDGE_RISING>; + resets = <&syscon 2>; + clocks = <&syscon 14>; + clock-names = "PCLK"; + sata = <&sata>; + status = "disabled"; + }; + + ata@63400000 { + compatible = "cortina,gemini-pata", "faraday,ftide010"; + reg = <0x63400000 0x1000>; + interrupts = <5 IRQ_TYPE_EDGE_RISING>; + resets = <&syscon 2>; + clocks = <&syscon 14>; + clock-names = "PCLK"; + sata = <&sata>; + status = "disabled"; + }; + dma-controller@67000000 { compatible = "faraday,ftdma020", "arm,pl080", "arm,primecell"; /* Faraday Technology FTDMAC020 variant */ -- cgit v1.2.3 From 25e6cfc81a352a5e85aa8a26972d453c4c121ad1 Mon Sep 17 00:00:00 2001 From: Sebastian Reichel Date: Tue, 13 Jun 2017 11:28:43 +0200 Subject: ARM: dts: omap4: Fix aes entry OMAP4 has a second aes module, so let's use proper name for the first instance. Signed-off-by: Sebastian Reichel Acked-by: Tero Kristo Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/omap4.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi index 578c53f08309..589690e034d3 100644 --- a/arch/arm/boot/dts/omap4.dtsi +++ b/arch/arm/boot/dts/omap4.dtsi @@ -900,9 +900,9 @@ ctrl-module = <&omap_control_usbotg>; }; - aes: aes@4b501000 { + aes1: aes@4b501000 { compatible = "ti,omap4-aes"; - ti,hwmods = "aes"; + ti,hwmods = "aes1"; reg = <0x4b501000 0xa0>; interrupts = ; dmas = <&sdma 111>, <&sdma 110>; -- cgit v1.2.3 From 7ca3e39719aafb1b9eaf282102574f26d52acd95 Mon Sep 17 00:00:00 2001 From: Sebastian Reichel Date: Tue, 13 Jun 2017 11:28:44 +0200 Subject: ARM: dts: omap4.dtsi: remove aes[12]_fck "aes1_fck" and "aes2_fck" are controlled by hwmod. Drop clock entries to avoid conflicts. Signed-off-by: Sebastian Reichel Acked-by: Tero Kristo Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/omap44xx-clocks.dtsi | 16 ---------------- 1 file changed, 16 deletions(-) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/omap44xx-clocks.dtsi b/arch/arm/boot/dts/omap44xx-clocks.dtsi index 9cb205b87835..05732ed4f50f 100644 --- a/arch/arm/boot/dts/omap44xx-clocks.dtsi +++ b/arch/arm/boot/dts/omap44xx-clocks.dtsi @@ -975,22 +975,6 @@ ti,max-div = <2>; }; - aes1_fck: aes1_fck@15a0 { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&l3_div_ck>; - ti,bit-shift = <1>; - reg = <0x15a0>; - }; - - aes2_fck: aes2_fck@15a8 { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&l3_div_ck>; - ti,bit-shift = <1>; - reg = <0x15a8>; - }; - dss_sys_clk: dss_sys_clk@1120 { #clock-cells = <0>; compatible = "ti,gate-clock"; -- cgit v1.2.3 From c6faccf21caffc433217f0fa58b8ef5c5e318a5d Mon Sep 17 00:00:00 2001 From: Tero Kristo Date: Tue, 13 Jun 2017 16:45:48 +0300 Subject: ARM: dts: omap4: add aes2 instance OMAP4 has AES2 instance, so add its integration data under DT. Signed-off-by: Tero Kristo Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/omap4.dtsi | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi index 589690e034d3..00e7656e0856 100644 --- a/arch/arm/boot/dts/omap4.dtsi +++ b/arch/arm/boot/dts/omap4.dtsi @@ -909,6 +909,15 @@ dma-names = "tx", "rx"; }; + aes2: aes@4b701000 { + compatible = "ti,omap4-aes"; + ti,hwmods = "aes2"; + reg = <0x4b701000 0xa0>; + interrupts = ; + dmas = <&sdma 114>, <&sdma 113>; + dma-names = "tx", "rx"; + }; + des: des@480a5000 { compatible = "ti,omap4-des"; ti,hwmods = "des"; -- cgit v1.2.3 From 45f1d5e3c71d479995cefe9dd30344c62efd60c8 Mon Sep 17 00:00:00 2001 From: Tero Kristo Date: Tue, 13 Jun 2017 16:45:49 +0300 Subject: ARM: dts: omap4: add SHAM node Add SHAM crypto accelerator. Signed-off-by: Tero Kristo Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/omap4.dtsi | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi index 00e7656e0856..64d00f5893a6 100644 --- a/arch/arm/boot/dts/omap4.dtsi +++ b/arch/arm/boot/dts/omap4.dtsi @@ -927,6 +927,15 @@ dma-names = "tx", "rx"; }; + sham: sham@4b100000 { + compatible = "ti,omap4-sham"; + ti,hwmods = "sham"; + reg = <0x4b100000 0x300>; + interrupts = ; + dmas = <&sdma 119>; + dma-names = "rx"; + }; + abb_mpu: regulator-abb-mpu { compatible = "ti,abb-v2"; regulator-name = "abb_mpu"; -- cgit v1.2.3 From bc97e88ecd360a730b0f9c96f285b680be496e06 Mon Sep 17 00:00:00 2001 From: Philipp Zabel Date: Mon, 12 Jun 2017 11:23:54 -0700 Subject: ARM: dts: imx6qdl: add multiplexer controls The IOMUXC General Purpose Register space contains various bitfields that control video bus multiplexers. Describe them using a mmio-mux node. The placement of the IPU CSI video mux controls differs between i.MX6D/Q and i.MX6S/DL. Signed-off-by: Philipp Zabel Reviewed-by: Fabio Estevam Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6dl.dtsi | 10 ++++++++++ arch/arm/boot/dts/imx6q.dtsi | 10 ++++++++++ arch/arm/boot/dts/imx6qdl.dtsi | 7 ++++++- 3 files changed, 26 insertions(+), 1 deletion(-) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/imx6dl.dtsi b/arch/arm/boot/dts/imx6dl.dtsi index 7aa120fbdc71..10bc9d135956 100644 --- a/arch/arm/boot/dts/imx6dl.dtsi +++ b/arch/arm/boot/dts/imx6dl.dtsi @@ -181,6 +181,16 @@ "di0", "di1"; }; +&mux { + mux-reg-masks = <0x34 0x00000007>, /* IPU_CSI0_MUX */ + <0x34 0x00000038>, /* IPU_CSI1_MUX */ + <0x0c 0x0000000c>, /* HDMI_MUX_CTL */ + <0x0c 0x000000c0>, /* LVDS0_MUX_CTL */ + <0x0c 0x00000300>, /* LVDS1_MUX_CTL */ + <0x28 0x00000003>, /* DCIC1_MUX_CTL */ + <0x28 0x0000000c>; /* DCIC2_MUX_CTL */ +}; + &vpu { compatible = "fsl,imx6dl-vpu", "cnm,coda960"; }; diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi index dd33849335b2..1a14ae2ce6d8 100644 --- a/arch/arm/boot/dts/imx6q.dtsi +++ b/arch/arm/boot/dts/imx6q.dtsi @@ -332,6 +332,16 @@ }; }; +&mux { + mux-reg-masks = <0x04 0x00080000>, /* MIPI_IPU1_MUX */ + <0x04 0x00100000>, /* MIPI_IPU2_MUX */ + <0x0c 0x0000000c>, /* HDMI_MUX_CTL */ + <0x0c 0x000000c0>, /* LVDS0_MUX_CTL */ + <0x0c 0x00000300>, /* LVDS1_MUX_CTL */ + <0x28 0x00000003>, /* DCIC1_MUX_CTL */ + <0x28 0x0000000c>; /* DCIC2_MUX_CTL */ +}; + &vpu { compatible = "fsl,imx6q-vpu", "cnm,coda960"; }; diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi index f325411f66aa..4ea7d86e625e 100644 --- a/arch/arm/boot/dts/imx6qdl.dtsi +++ b/arch/arm/boot/dts/imx6qdl.dtsi @@ -826,8 +826,13 @@ }; gpr: iomuxc-gpr@020e0000 { - compatible = "fsl,imx6q-iomuxc-gpr", "syscon"; + compatible = "fsl,imx6q-iomuxc-gpr", "syscon", "simple-mfd"; reg = <0x020e0000 0x38>; + + mux: mux-controller { + compatible = "mmio-mux"; + #mux-control-cells = <1>; + }; }; iomuxc: iomuxc@020e0000 { -- cgit v1.2.3 From b0cb1bd4a380da07ef9536054f37f2cd9a777384 Mon Sep 17 00:00:00 2001 From: Steve Longerbeam Date: Mon, 12 Jun 2017 11:23:55 -0700 Subject: ARM: dts: imx6qdl: Add compatible, clocks, irqs to MIPI CSI-2 node Add to the MIPI CSI2 receiver node: compatible strings, interrupt sources, and clocks. Signed-off-by: Steve Longerbeam Reviewed-by: Fabio Estevam Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6qdl.dtsi | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi index 4ea7d86e625e..a42a3fd3ee94 100644 --- a/arch/arm/boot/dts/imx6qdl.dtsi +++ b/arch/arm/boot/dts/imx6qdl.dtsi @@ -1158,7 +1158,14 @@ }; mipi_csi: mipi@021dc000 { + compatible = "fsl,imx6-mipi-csi2"; reg = <0x021dc000 0x4000>; + interrupts = <0 100 0x04>, <0 101 0x04>; + clocks = <&clks IMX6QDL_CLK_HSI_TX>, + <&clks IMX6QDL_CLK_VIDEO_27M>, + <&clks IMX6QDL_CLK_EIM_PODF>; + clock-names = "dphy", "ref", "pix"; + status = "disabled"; }; mipi_dsi: mipi@021e0000 { -- cgit v1.2.3 From 2539f517acbdc8471f0aebdffe894eb571103368 Mon Sep 17 00:00:00 2001 From: Philipp Zabel Date: Mon, 12 Jun 2017 11:23:56 -0700 Subject: ARM: dts: imx6qdl: Add video multiplexers, mipi_csi, and their connections This patch adds the device tree graph connecting the input multiplexers to the IPU CSIs and the MIPI-CSI2 gasket on i.MX6. The MIPI_IPU multiplexers are added as children of the iomuxc-gpr syscon device node. On i.MX6Q/D two two-input multiplexers in front of IPU1 CSI0 and IPU2 CSI1 allow to select between CSI0/1 parallel input pads and the MIPI CSI-2 virtual channels 0/3. On i.MX6DL/S two five-input multiplexers in front of IPU1 CSI0 and IPU1 CSI1 allow to select between CSI0/1 parallel input pads and any of the four MIPI CSI-2 virtual channels. Changes from Steve Longerbeam: - Removed some dangling/unused endpoints (ipu2_csi0_from_csi2ipu) - Renamed the mipi virtual channel endpoint labels, from "mipi_csiX_..." to "mipi_vcX...". - Added input endpoint anchors to the video muxes for the connections from parallel sensors. Signed-off-by: Philipp Zabel Signed-off-by: Steve Longerbeam Reviewed-by: Fabio Estevam Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6dl.dtsi | 174 +++++++++++++++++++++++++++++++++++++++++ arch/arm/boot/dts/imx6q.dtsi | 110 ++++++++++++++++++++++++++ arch/arm/boot/dts/imx6qdl.dtsi | 6 ++ 3 files changed, 290 insertions(+) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/imx6dl.dtsi b/arch/arm/boot/dts/imx6dl.dtsi index 10bc9d135956..4049af7cb45a 100644 --- a/arch/arm/boot/dts/imx6dl.dtsi +++ b/arch/arm/boot/dts/imx6dl.dtsi @@ -164,6 +164,116 @@ <&iomuxc 9 207 1>, <&iomuxc 10 206 1>, <&iomuxc 11 133 3>; }; +&gpr { + ipu1_csi0_mux: ipu1_csi0_mux@34 { + compatible = "video-mux"; + mux-controls = <&mux 0>; + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + ipu1_csi0_mux_from_mipi_vc0: endpoint { + remote-endpoint = <&mipi_vc0_to_ipu1_csi0_mux>; + }; + }; + + port@1 { + reg = <1>; + + ipu1_csi0_mux_from_mipi_vc1: endpoint { + remote-endpoint = <&mipi_vc1_to_ipu1_csi0_mux>; + }; + }; + + port@2 { + reg = <2>; + + ipu1_csi0_mux_from_mipi_vc2: endpoint { + remote-endpoint = <&mipi_vc2_to_ipu1_csi0_mux>; + }; + }; + + port@3 { + reg = <3>; + + ipu1_csi0_mux_from_mipi_vc3: endpoint { + remote-endpoint = <&mipi_vc3_to_ipu1_csi0_mux>; + }; + }; + + port@4 { + reg = <4>; + + ipu1_csi0_mux_from_parallel_sensor: endpoint { + }; + }; + + port@5 { + reg = <5>; + + ipu1_csi0_mux_to_ipu1_csi0: endpoint { + remote-endpoint = <&ipu1_csi0_from_ipu1_csi0_mux>; + }; + }; + }; + + ipu1_csi1_mux: ipu1_csi1_mux@34 { + compatible = "video-mux"; + mux-controls = <&mux 1>; + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + ipu1_csi1_mux_from_mipi_vc0: endpoint { + remote-endpoint = <&mipi_vc0_to_ipu1_csi1_mux>; + }; + }; + + port@1 { + reg = <1>; + + ipu1_csi1_mux_from_mipi_vc1: endpoint { + remote-endpoint = <&mipi_vc1_to_ipu1_csi1_mux>; + }; + }; + + port@2 { + reg = <2>; + + ipu1_csi1_mux_from_mipi_vc2: endpoint { + remote-endpoint = <&mipi_vc2_to_ipu1_csi1_mux>; + }; + }; + + port@3 { + reg = <3>; + + ipu1_csi1_mux_from_mipi_vc3: endpoint { + remote-endpoint = <&mipi_vc3_to_ipu1_csi1_mux>; + }; + }; + + port@4 { + reg = <4>; + + ipu1_csi1_mux_from_parallel_sensor: endpoint { + }; + }; + + port@5 { + reg = <5>; + + ipu1_csi1_mux_to_ipu1_csi1: endpoint { + remote-endpoint = <&ipu1_csi1_from_ipu1_csi1_mux>; + }; + }; + }; +}; + &gpt { compatible = "fsl,imx6dl-gpt"; }; @@ -172,6 +282,12 @@ compatible = "fsl,imx6dl-hdmi"; }; +&ipu1_csi1 { + ipu1_csi1_from_ipu1_csi1_mux: endpoint { + remote-endpoint = <&ipu1_csi1_mux_to_ipu1_csi1>; + }; +}; + &ldb { clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>, <&clks IMX6QDL_CLK_LDB_DI1_SEL>, <&clks IMX6QDL_CLK_IPU1_DI0_SEL>, <&clks IMX6QDL_CLK_IPU1_DI1_SEL>, @@ -181,6 +297,64 @@ "di0", "di1"; }; +&mipi_csi { + port@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + mipi_vc0_to_ipu1_csi0_mux: endpoint@0 { + remote-endpoint = <&ipu1_csi0_mux_from_mipi_vc0>; + }; + + mipi_vc0_to_ipu1_csi1_mux: endpoint@1 { + remote-endpoint = <&ipu1_csi1_mux_from_mipi_vc0>; + }; + }; + + port@2 { + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + + mipi_vc1_to_ipu1_csi0_mux: endpoint@0 { + remote-endpoint = <&ipu1_csi0_mux_from_mipi_vc1>; + }; + + mipi_vc1_to_ipu1_csi1_mux: endpoint@1 { + remote-endpoint = <&ipu1_csi1_mux_from_mipi_vc1>; + }; + }; + + port@3 { + reg = <3>; + #address-cells = <1>; + #size-cells = <0>; + + mipi_vc2_to_ipu1_csi0_mux: endpoint@0 { + remote-endpoint = <&ipu1_csi0_mux_from_mipi_vc2>; + }; + + mipi_vc2_to_ipu1_csi1_mux: endpoint@1 { + remote-endpoint = <&ipu1_csi1_mux_from_mipi_vc2>; + }; + }; + + port@4 { + reg = <4>; + #address-cells = <1>; + #size-cells = <0>; + + mipi_vc3_to_ipu1_csi0_mux: endpoint@0 { + remote-endpoint = <&ipu1_csi0_mux_from_mipi_vc3>; + }; + + mipi_vc3_to_ipu1_csi1_mux: endpoint@1 { + remote-endpoint = <&ipu1_csi1_mux_from_mipi_vc3>; + }; + }; +}; + &mux { mux-reg-masks = <0x34 0x00000007>, /* IPU_CSI0_MUX */ <0x34 0x00000038>, /* IPU_CSI1_MUX */ diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi index 1a14ae2ce6d8..39d150463dfc 100644 --- a/arch/arm/boot/dts/imx6q.dtsi +++ b/arch/arm/boot/dts/imx6q.dtsi @@ -143,10 +143,18 @@ ipu2_csi0: port@0 { reg = <0>; + + ipu2_csi0_from_mipi_vc2: endpoint { + remote-endpoint = <&mipi_vc2_to_ipu2_csi0>; + }; }; ipu2_csi1: port@1 { reg = <1>; + + ipu2_csi1_from_ipu2_csi1_mux: endpoint { + remote-endpoint = <&ipu2_csi1_mux_to_ipu2_csi1>; + }; }; ipu2_di0: port@2 { @@ -246,6 +254,68 @@ gpio-ranges = <&iomuxc 0 172 9>, <&iomuxc 9 189 2>, <&iomuxc 11 146 3>; }; +&gpr { + ipu1_csi0_mux { + compatible = "video-mux"; + mux-controls = <&mux 0>; + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + ipu1_csi0_mux_from_mipi_vc0: endpoint { + remote-endpoint = <&mipi_vc0_to_ipu1_csi0_mux>; + }; + }; + + port@1 { + reg = <1>; + + ipu1_csi0_mux_from_parallel_sensor: endpoint { + }; + }; + + port@2 { + reg = <2>; + + ipu1_csi0_mux_to_ipu1_csi0: endpoint { + remote-endpoint = <&ipu1_csi0_from_ipu1_csi0_mux>; + }; + }; + }; + + ipu2_csi1_mux { + compatible = "video-mux"; + mux-controls = <&mux 1>; + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + ipu2_csi1_mux_from_mipi_vc3: endpoint { + remote-endpoint = <&mipi_vc3_to_ipu2_csi1_mux>; + }; + }; + + port@1 { + reg = <1>; + + ipu2_csi1_mux_from_parallel_sensor: endpoint { + }; + }; + + port@2 { + reg = <2>; + + ipu2_csi1_mux_to_ipu2_csi1: endpoint { + remote-endpoint = <&ipu2_csi1_from_ipu2_csi1_mux>; + }; + }; + }; +}; + &hdmi { compatible = "fsl,imx6q-hdmi"; @@ -266,6 +336,12 @@ }; }; +&ipu1_csi1 { + ipu1_csi1_from_mipi_vc1: endpoint { + remote-endpoint = <&mipi_vc1_to_ipu1_csi1>; + }; +}; + &ldb { clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>, <&clks IMX6QDL_CLK_LDB_DI1_SEL>, <&clks IMX6QDL_CLK_IPU1_DI0_SEL>, <&clks IMX6QDL_CLK_IPU1_DI1_SEL>, @@ -312,6 +388,40 @@ }; }; +&mipi_csi { + port@1 { + reg = <1>; + + mipi_vc0_to_ipu1_csi0_mux: endpoint { + remote-endpoint = <&ipu1_csi0_mux_from_mipi_vc0>; + }; + }; + + port@2 { + reg = <2>; + + mipi_vc1_to_ipu1_csi1: endpoint { + remote-endpoint = <&ipu1_csi1_from_mipi_vc1>; + }; + }; + + port@3 { + reg = <3>; + + mipi_vc2_to_ipu2_csi0: endpoint { + remote-endpoint = <&ipu2_csi0_from_mipi_vc2>; + }; + }; + + port@4 { + reg = <4>; + + mipi_vc3_to_ipu2_csi1_mux: endpoint { + remote-endpoint = <&ipu2_csi1_mux_from_mipi_vc3>; + }; + }; +}; + &mipi_dsi { ports { port@2 { diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi index a42a3fd3ee94..a9723b94bafa 100644 --- a/arch/arm/boot/dts/imx6qdl.dtsi +++ b/arch/arm/boot/dts/imx6qdl.dtsi @@ -1160,6 +1160,8 @@ mipi_csi: mipi@021dc000 { compatible = "fsl,imx6-mipi-csi2"; reg = <0x021dc000 0x4000>; + #address-cells = <1>; + #size-cells = <0>; interrupts = <0 100 0x04>, <0 101 0x04>; clocks = <&clks IMX6QDL_CLK_HSI_TX>, <&clks IMX6QDL_CLK_VIDEO_27M>, @@ -1267,6 +1269,10 @@ ipu1_csi0: port@0 { reg = <0>; + + ipu1_csi0_from_ipu1_csi0_mux: endpoint { + remote-endpoint = <&ipu1_csi0_mux_to_ipu1_csi0>; + }; }; ipu1_csi1: port@1 { -- cgit v1.2.3 From d72ee3a12b9a1c43dbe412ef799df341d8161dd0 Mon Sep 17 00:00:00 2001 From: Steve Longerbeam Date: Mon, 12 Jun 2017 11:23:57 -0700 Subject: ARM: dts: imx6qdl: add capture-subsystem device Signed-off-by: Steve Longerbeam Reviewed-by: Fabio Estevam Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6dl.dtsi | 5 +++++ arch/arm/boot/dts/imx6q.dtsi | 5 +++++ 2 files changed, 10 insertions(+) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/imx6dl.dtsi b/arch/arm/boot/dts/imx6dl.dtsi index 4049af7cb45a..8475e6cc59ac 100644 --- a/arch/arm/boot/dts/imx6dl.dtsi +++ b/arch/arm/boot/dts/imx6dl.dtsi @@ -100,6 +100,11 @@ }; }; + capture-subsystem { + compatible = "fsl,imx-capture-subsystem"; + ports = <&ipu1_csi0>, <&ipu1_csi1>; + }; + display-subsystem { compatible = "fsl,imx-display-subsystem"; ports = <&ipu1_di0>, <&ipu1_di1>; diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi index 39d150463dfc..90a741732f60 100644 --- a/arch/arm/boot/dts/imx6q.dtsi +++ b/arch/arm/boot/dts/imx6q.dtsi @@ -206,6 +206,11 @@ }; }; + capture-subsystem { + compatible = "fsl,imx-capture-subsystem"; + ports = <&ipu1_csi0>, <&ipu1_csi1>, <&ipu2_csi0>, <&ipu2_csi1>; + }; + display-subsystem { compatible = "fsl,imx-display-subsystem"; ports = <&ipu1_di0>, <&ipu1_di1>, <&ipu2_di0>, <&ipu2_di1>; -- cgit v1.2.3 From 4c8777892e80bbe39efd0584502793b4b244f99b Mon Sep 17 00:00:00 2001 From: Steve Longerbeam Date: Mon, 12 Jun 2017 11:23:58 -0700 Subject: ARM: dts: imx6qdl-sabrelite: remove erratum ERR006687 workaround There is a pin conflict with GPIO_6. This pin functions as a power input pin to the OV5642 camera sensor, but ENET uses it as the h/w workaround for erratum ERR006687, to wake-up the ARM cores on normal RX and TX packet done events. So we need to remove the h/w workaround to support the OV5642. The result is that the CPUidle driver will no longer allow entering the deep idle states on the sabrelite. This is a partial revert of commit 6261c4c8f13e ("ARM: dts: imx6qdl-sabrelite: use GPIO_6 for FEC interrupt.") commit a28eeb43ee57 ("ARM: dts: imx6: tag boards that have the HW workaround for ERR006687") Signed-off-by: Steve Longerbeam Reviewed-by: Fabio Estevam Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6qdl-sabrelite.dtsi | 4 ---- 1 file changed, 4 deletions(-) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi index 84131794e97b..89dce27dfbad 100644 --- a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi @@ -270,9 +270,6 @@ txd1-skew-ps = <0>; txd2-skew-ps = <0>; txd3-skew-ps = <0>; - interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>, - <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>; - fsl,err006687-workaround-present; status = "okay"; }; @@ -373,7 +370,6 @@ MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030 /* Phy reset */ MX6QDL_PAD_EIM_D23__GPIO3_IO23 0x000b0 - MX6QDL_PAD_GPIO_6__ENET_IRQ 0x000b1 >; }; -- cgit v1.2.3 From 789459c41cae9c52e8c16ff9557e53487c243e6d Mon Sep 17 00:00:00 2001 From: Steve Longerbeam Date: Mon, 12 Jun 2017 11:23:59 -0700 Subject: ARM: dts: imx6-sabrelite: add OV5642 and OV5640 camera sensors Adds the OV5642 parallel-bus sensor, and the OV5640 MIPI CSI-2 sensor. Both hang off the same i2c2 bus, so they require different (and non- default) i2c slave addresses. The OV5642 connects to the parallel-bus mux input port on ipu1_csi0_mux. The OV5640 connects to the input port on the MIPI CSI-2 receiver on mipi_csi. The OV5642 node is disabled temporarily while the subdev driver is cleaned up and submitted later. Signed-off-by: Steve Longerbeam Reviewed-by: Fabio Estevam Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6dl-sabrelite.dts | 5 ++ arch/arm/boot/dts/imx6q-sabrelite.dts | 5 ++ arch/arm/boot/dts/imx6qdl-sabrelite.dtsi | 148 +++++++++++++++++++++++++++++++ 3 files changed, 158 insertions(+) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/imx6dl-sabrelite.dts b/arch/arm/boot/dts/imx6dl-sabrelite.dts index 2f904527a097..33040761b253 100644 --- a/arch/arm/boot/dts/imx6dl-sabrelite.dts +++ b/arch/arm/boot/dts/imx6dl-sabrelite.dts @@ -48,3 +48,8 @@ model = "Freescale i.MX6 DualLite SABRE Lite Board"; compatible = "fsl,imx6dl-sabrelite", "fsl,imx6dl"; }; + +&ipu1_csi1_from_ipu1_csi1_mux { + clock-lanes = <0>; + data-lanes = <1 2>; +}; diff --git a/arch/arm/boot/dts/imx6q-sabrelite.dts b/arch/arm/boot/dts/imx6q-sabrelite.dts index 02a7cdfd57c9..dc51262e7b2f 100644 --- a/arch/arm/boot/dts/imx6q-sabrelite.dts +++ b/arch/arm/boot/dts/imx6q-sabrelite.dts @@ -52,3 +52,8 @@ &sata { status = "okay"; }; + +&ipu1_csi1_from_mipi_vc1 { + clock-lanes = <0>; + data-lanes = <1 2>; +}; diff --git a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi index 89dce27dfbad..afe7449c47da 100644 --- a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi @@ -39,6 +39,8 @@ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. */ + +#include #include #include @@ -94,6 +96,42 @@ pinctrl-0 = <&pinctrl_can_xcvr>; gpio = <&gpio1 2 GPIO_ACTIVE_LOW>; }; + + reg_1p5v: regulator@4 { + compatible = "regulator-fixed"; + reg = <4>; + regulator-name = "1P5V"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + }; + + reg_1p8v: regulator@5 { + compatible = "regulator-fixed"; + reg = <5>; + regulator-name = "1P8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + reg_2p8v: regulator@6 { + compatible = "regulator-fixed"; + reg = <6>; + regulator-name = "2P8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + }; + }; + + mipi_xclk: mipi_xclk { + compatible = "pwm-clock"; + #clock-cells = <0>; + clock-frequency = <22000000>; + clock-output-names = "mipi_pwm3"; + pwms = <&pwm3 0 45>; /* 1 / 45 ns = 22 MHz */ + status = "okay"; }; gpio-keys { @@ -220,6 +258,22 @@ }; }; +&ipu1_csi0_from_ipu1_csi0_mux { + bus-width = <8>; + data-shift = <12>; /* Lines 19:12 used */ + hsync-active = <1>; + vync-active = <1>; +}; + +&ipu1_csi0_mux_from_parallel_sensor { + remote-endpoint = <&ov5642_to_ipu1_csi0_mux>; +}; + +&ipu1_csi0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ipu1_csi0>; +}; + &audmux { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_audmux>; @@ -298,6 +352,53 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c2>; status = "okay"; + + ov5640: camera@40 { + compatible = "ovti,ov5640"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ov5640>; + reg = <0x40>; + clocks = <&mipi_xclk>; + clock-names = "xclk"; + DOVDD-supply = <®_1p8v>; + AVDD-supply = <®_2p8v>; + DVDD-supply = <®_1p5v>; + reset-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>; /* NANDF_D5 */ + powerdown-gpios = <&gpio6 9 GPIO_ACTIVE_HIGH>; /* NANDF_WP_B */ + + port { + #address-cells = <1>; + #size-cells = <0>; + + ov5640_to_mipi_csi2: endpoint { + remote-endpoint = <&mipi_csi2_in>; + clock-lanes = <0>; + data-lanes = <1 2>; + }; + }; + }; + + ov5642: camera@42 { + compatible = "ovti,ov5642"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ov5642>; + clocks = <&clks IMX6QDL_CLK_CKO2>; + clock-names = "xclk"; + reg = <0x42>; + reset-gpios = <&gpio1 8 GPIO_ACTIVE_LOW>; + powerdown-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>; + gp-gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>; + status = "disabled"; + + port { + ov5642_to_ipu1_csi0_mux: endpoint { + remote-endpoint = <&ipu1_csi0_mux_from_parallel_sensor>; + bus-width = <8>; + hsync-active = <1>; + vsync-active = <1>; + }; + }; + }; }; &i2c3 { @@ -411,6 +512,23 @@ >; }; + pinctrl_ipu1_csi0: ipu1csi0grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12 0x1b0b0 + MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13 0x1b0b0 + MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14 0x1b0b0 + MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15 0x1b0b0 + MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16 0x1b0b0 + MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17 0x1b0b0 + MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18 0x1b0b0 + MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19 0x1b0b0 + MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK 0x1b0b0 + MX6QDL_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC 0x1b0b0 + MX6QDL_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC 0x1b0b0 + MX6QDL_PAD_CSI0_DATA_EN__IPU1_CSI0_DATA_EN 0x1b0b0 + >; + }; + pinctrl_j15: j15grp { fsl,pins = < MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10 @@ -444,6 +562,22 @@ >; }; + pinctrl_ov5640: ov5640grp { + fsl,pins = < + MX6QDL_PAD_NANDF_D5__GPIO2_IO05 0x000b0 + MX6QDL_PAD_NANDF_WP_B__GPIO6_IO09 0x0b0b0 + >; + }; + + pinctrl_ov5642: ov5642grp { + fsl,pins = < + MX6QDL_PAD_SD1_DAT0__GPIO1_IO16 0x1b0b0 + MX6QDL_PAD_GPIO_6__GPIO1_IO06 0x1b0b0 + MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x130b0 + MX6QDL_PAD_GPIO_3__CCM_CLKO2 0x000b0 + >; + }; + pinctrl_pwm1: pwm1grp { fsl,pins = < MX6QDL_PAD_SD1_DAT3__PWM1_OUT 0x1b0b1 @@ -598,3 +732,17 @@ vmmc-supply = <®_3p3v>; status = "okay"; }; + +&mipi_csi { + status = "okay"; + + port@0 { + reg = <0>; + + mipi_csi2_in: endpoint { + remote-endpoint = <&ov5640_to_mipi_csi2>; + clock-lanes = <0>; + data-lanes = <1 2>; + }; + }; +}; -- cgit v1.2.3 From 545fb52e53d6dfa9e64e0a10c336d8473319d077 Mon Sep 17 00:00:00 2001 From: Steve Longerbeam Date: Mon, 12 Jun 2017 11:24:00 -0700 Subject: ARM: dts: imx6-sabresd: add OV5642 and OV5640 camera sensors Enables the OV5642 parallel-bus sensor, and the OV5640 MIPI CSI-2 sensor. The OV5642 connects to the parallel-bus mux input port on ipu1_csi0_mux. The OV5640 connects to the input port on the MIPI CSI-2 receiver on mipi_csi. Until the OV5652 sensor module compatible with the SabreSD becomes available for testing, the ov5642 node is currently disabled. Signed-off-by: Steve Longerbeam Reviewed-by: Fabio Estevam Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6dl-sabresd.dts | 5 ++ arch/arm/boot/dts/imx6q-sabresd.dts | 5 ++ arch/arm/boot/dts/imx6qdl-sabresd.dtsi | 114 ++++++++++++++++++++++++++++++++- 3 files changed, 123 insertions(+), 1 deletion(-) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/imx6dl-sabresd.dts b/arch/arm/boot/dts/imx6dl-sabresd.dts index 1e45f2f9d0b6..9607afe088fc 100644 --- a/arch/arm/boot/dts/imx6dl-sabresd.dts +++ b/arch/arm/boot/dts/imx6dl-sabresd.dts @@ -15,3 +15,8 @@ model = "Freescale i.MX6 DualLite SABRE Smart Device Board"; compatible = "fsl,imx6dl-sabresd", "fsl,imx6dl"; }; + +&ipu1_csi1_from_ipu1_csi1_mux { + clock-lanes = <0>; + data-lanes = <1 2>; +}; diff --git a/arch/arm/boot/dts/imx6q-sabresd.dts b/arch/arm/boot/dts/imx6q-sabresd.dts index 9cbdfe7a0931..527772b62fee 100644 --- a/arch/arm/boot/dts/imx6q-sabresd.dts +++ b/arch/arm/boot/dts/imx6q-sabresd.dts @@ -23,3 +23,8 @@ &sata { status = "okay"; }; + +&ipu1_csi1_from_mipi_vc1 { + clock-lanes = <0>; + data-lanes = <1 2>; +}; diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi index db705f1cbe37..b72b6fa47580 100644 --- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi @@ -10,6 +10,7 @@ * http://www.gnu.org/copyleft/gpl.html */ +#include #include #include @@ -146,6 +147,36 @@ }; }; +&ipu1_csi0_from_ipu1_csi0_mux { + bus-width = <8>; + data-shift = <12>; /* Lines 19:12 used */ + hsync-active = <1>; + vsync-active = <1>; +}; + +&ipu1_csi0_mux_from_parallel_sensor { + remote-endpoint = <&ov5642_to_ipu1_csi0_mux>; +}; + +&ipu1_csi0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ipu1_csi0>; +}; + +&mipi_csi { + status = "okay"; + + port@0 { + reg = <0>; + + mipi_csi2_in: endpoint { + remote-endpoint = <&ov5640_to_mipi_csi2>; + clock-lanes = <0>; + data-lanes = <1 2>; + }; + }; +}; + &audmux { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_audmux>; @@ -213,7 +244,32 @@ 0x8014 /* 4:FN_DMICCDAT */ 0x0000 /* 5:Default */ >; - }; + }; + + ov5642: camera@3c { + compatible = "ovti,ov5642"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ov5642>; + clocks = <&clks IMX6QDL_CLK_CKO>; + clock-names = "xclk"; + reg = <0x3c>; + DOVDD-supply = <&vgen4_reg>; /* 1.8v */ + AVDD-supply = <&vgen3_reg>; /* 2.8v, rev C board is VGEN3 + rev B board is VGEN5 */ + DVDD-supply = <&vgen2_reg>; /* 1.5v*/ + powerdown-gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio1 17 GPIO_ACTIVE_LOW>; + status = "disabled"; + + port { + ov5642_to_ipu1_csi0_mux: endpoint { + remote-endpoint = <&ipu1_csi0_mux_from_parallel_sensor>; + bus-width = <8>; + hsync-active = <1>; + vsync-active = <1>; + }; + }; + }; }; &i2c2 { @@ -222,6 +278,32 @@ pinctrl-0 = <&pinctrl_i2c2>; status = "okay"; + ov5640: camera@3c { + compatible = "ovti,ov5640"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ov5640>; + reg = <0x3c>; + clocks = <&clks IMX6QDL_CLK_CKO>; + clock-names = "xclk"; + DOVDD-supply = <&vgen4_reg>; /* 1.8v */ + AVDD-supply = <&vgen3_reg>; /* 2.8v, rev C board is VGEN3 + rev B board is VGEN5 */ + DVDD-supply = <&vgen2_reg>; /* 1.5v*/ + powerdown-gpios = <&gpio1 19 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio1 20 GPIO_ACTIVE_LOW>; + + port { + #address-cells = <1>; + #size-cells = <0>; + + ov5640_to_mipi_csi2: endpoint { + remote-endpoint = <&mipi_csi2_in>; + clock-lanes = <0>; + data-lanes = <1 2>; + }; + }; + }; + pmic: pfuze100@08 { compatible = "fsl,pfuze100"; reg = <0x08>; @@ -425,6 +507,36 @@ >; }; + pinctrl_ipu1_csi0: ipu1csi0grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12 0x1b0b0 + MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13 0x1b0b0 + MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14 0x1b0b0 + MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15 0x1b0b0 + MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16 0x1b0b0 + MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17 0x1b0b0 + MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18 0x1b0b0 + MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19 0x1b0b0 + MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK 0x1b0b0 + MX6QDL_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC 0x1b0b0 + MX6QDL_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC 0x1b0b0 + >; + }; + + pinctrl_ov5640: ov5640grp { + fsl,pins = < + MX6QDL_PAD_SD1_DAT2__GPIO1_IO19 0x1b0b0 + MX6QDL_PAD_SD1_CLK__GPIO1_IO20 0x1b0b0 + >; + }; + + pinctrl_ov5642: ov5642grp { + fsl,pins = < + MX6QDL_PAD_SD1_DAT0__GPIO1_IO16 0x1b0b0 + MX6QDL_PAD_SD1_DAT1__GPIO1_IO17 0x1b0b0 + >; + }; + pinctrl_pcie: pciegrp { fsl,pins = < MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x1b0b0 -- cgit v1.2.3 From 9976c92df9c347acd9726f5c187705f191d51999 Mon Sep 17 00:00:00 2001 From: Steve Longerbeam Date: Mon, 12 Jun 2017 11:24:01 -0700 Subject: ARM: dts: imx6-sabreauto: create i2cmux for i2c3 The sabreauto uses a steering pin to select between the SDA signal on i2c3 bus, and a data-in pin for an SPI NOR chip. Use i2cmux to control this steering pin. Idle state of the i2cmux selects SPI NOR. This is not a classic way to use i2cmux, since one side of the mux selects something other than an i2c bus, but it works and is probably the cleanest solution. Note that if one thread is attempting to access SPI NOR while another thread is accessing i2c3, the SPI NOR access will fail since the i2cmux has selected the SDA pin rather than SPI NOR data-in. This couldn't be avoided in any case, the board is not designed to allow concurrent i2c3 and SPI NOR functions (and the default device-tree does not enable SPI NOR anyway). Devices hanging off i2c3 should now be defined under i2cmux, so that the steering pin can be properly controlled to access those devices. The port expanders (MAX7310) are thus moved into i2cmux. Signed-off-by: Steve Longerbeam Reviewed-by: Fabio Estevam Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6qdl-sabreauto.dtsi | 65 +++++++++++++++++++++----------- 1 file changed, 44 insertions(+), 21 deletions(-) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi index a2a714d199ea..c8e35c4e9d6a 100644 --- a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi @@ -108,6 +108,44 @@ default-brightness-level = <7>; status = "okay"; }; + + i2cmux { + compatible = "i2c-mux-gpio"; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3mux>; + mux-gpios = <&gpio5 4 0>; + i2c-parent = <&i2c3>; + idle-state = <0>; + + i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + max7310_a: gpio@30 { + compatible = "maxim,max7310"; + reg = <0x30>; + gpio-controller; + #gpio-cells = <2>; + }; + + max7310_b: gpio@32 { + compatible = "maxim,max7310"; + reg = <0x32>; + gpio-controller; + #gpio-cells = <2>; + }; + + max7310_c: gpio@34 { + compatible = "maxim,max7310"; + reg = <0x34>; + gpio-controller; + #gpio-cells = <2>; + }; + }; + }; }; &clks { @@ -290,27 +328,6 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c3>; status = "okay"; - - max7310_a: gpio@30 { - compatible = "maxim,max7310"; - reg = <0x30>; - gpio-controller; - #gpio-cells = <2>; - }; - - max7310_b: gpio@32 { - compatible = "maxim,max7310"; - reg = <0x32>; - gpio-controller; - #gpio-cells = <2>; - }; - - max7310_c: gpio@34 { - compatible = "maxim,max7310"; - reg = <0x34>; - gpio-controller; - #gpio-cells = <2>; - }; }; &iomuxc { @@ -418,6 +435,12 @@ >; }; + pinctrl_i2c3mux: i2c3muxgrp { + fsl,pins = < + MX6QDL_PAD_EIM_A24__GPIO5_IO04 0x0b0b1 + >; + }; + pinctrl_pwm3: pwm1grp { fsl,pins = < MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b1 -- cgit v1.2.3 From f9f1353b7508d133e4359f703ec06827dd0be26e Mon Sep 17 00:00:00 2001 From: Steve Longerbeam Date: Mon, 12 Jun 2017 11:24:02 -0700 Subject: ARM: dts: imx6-sabreauto: add reset-gpios property for max7310_b The reset pin to the port expander chip (MAX7310) is controlled by a gpio, so define a reset-gpios property to control it. There are three MAX7310's on the SabreAuto CPU card (max7310_[abc]), but all use the same pin for their reset. Since all can't acquire the same pin, assign it to max7310_b, that chip is needed by more functions (usb and adv7180). Signed-off-by: Steve Longerbeam Reviewed-by: Fabio Estevam Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6qdl-sabreauto.dtsi | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi index c8e35c4e9d6a..21dea5f50a37 100644 --- a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi @@ -136,6 +136,9 @@ reg = <0x32>; gpio-controller; #gpio-cells = <2>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_max7310>; + reset-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; }; max7310_c: gpio@34 { @@ -441,6 +444,12 @@ >; }; + pinctrl_max7310: max7310grp { + fsl,pins = < + MX6QDL_PAD_SD2_DAT0__GPIO1_IO15 0x1b0b0 + >; + }; + pinctrl_pwm3: pwm1grp { fsl,pins = < MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b1 -- cgit v1.2.3 From ba4105401a893c429a2542f3f33bb7fb813dd5c9 Mon Sep 17 00:00:00 2001 From: Steve Longerbeam Date: Mon, 12 Jun 2017 11:24:03 -0700 Subject: ARM: dts: imx6-sabreauto: add pinctrl for gpt input capture Add pinctrl groups for both GPT input capture channels. Signed-off-by: Steve Longerbeam Reviewed-by: Fabio Estevam Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6qdl-sabreauto.dtsi | 12 ++++++++++++ 1 file changed, 12 insertions(+) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi index 21dea5f50a37..1212f822c44f 100644 --- a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi @@ -456,6 +456,18 @@ >; }; + pinctrl_gpt_input_capture0: gptinputcapture0grp { + fsl,pins = < + MX6QDL_PAD_SD1_DAT0__GPT_CAPTURE1 0x1b0b0 + >; + }; + + pinctrl_gpt_input_capture1: gptinputcapture1grp { + fsl,pins = < + MX6QDL_PAD_SD1_DAT1__GPT_CAPTURE2 0x1b0b0 + >; + }; + pinctrl_spdif: spdifgrp { fsl,pins = < MX6QDL_PAD_KEY_COL3__SPDIF_IN 0x1b0b0 -- cgit v1.2.3 From ad8046a56da562677f41ca3a6d1a93619dbb0f97 Mon Sep 17 00:00:00 2001 From: Steve Longerbeam Date: Mon, 12 Jun 2017 11:24:04 -0700 Subject: ARM: dts: imx6-sabreauto: add the ADV7180 video decoder Enables the ADV7180 decoder sensor. The ADV7180 connects to the parallel-bus mux input on ipu1_csi0_mux. The ADV7180 power pin is via max7310_b port expander. Changes from Tim Harvey: - Use IRQ_TYPE_LEVEL_LOW instead of 0x8 for interrupt type for clarity. - For 8-bit parallel IPU1-CSI0 bus connection only data[12-19] are used. Signed-off-by: Steve Longerbeam Signed-off-by: Tim Harvey Reviewed-by: Fabio Estevam Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6qdl-sabreauto.dtsi | 45 ++++++++++++++++++++++++++++++++ 1 file changed, 45 insertions(+) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi index 1212f822c44f..6a7594e5d183 100644 --- a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi @@ -124,6 +124,21 @@ #size-cells = <0>; reg = <1>; + adv7180: camera@21 { + compatible = "adi,adv7180"; + reg = <0x21>; + powerdown-gpios = <&max7310_b 2 GPIO_ACTIVE_LOW>; + interrupt-parent = <&gpio1>; + interrupts = <27 IRQ_TYPE_LEVEL_LOW>; + + port { + adv7180_to_ipu1_csi0_mux: endpoint { + remote-endpoint = <&ipu1_csi0_mux_from_parallel_sensor>; + bus-width = <8>; + }; + }; + }; + max7310_a: gpio@30 { compatible = "maxim,max7310"; reg = <0x30>; @@ -151,6 +166,20 @@ }; }; +&ipu1_csi0_from_ipu1_csi0_mux { + bus-width = <8>; +}; + +&ipu1_csi0_mux_from_parallel_sensor { + remote-endpoint = <&adv7180_to_ipu1_csi0_mux>; + bus-width = <8>; +}; + +&ipu1_csi0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ipu1_csi0>; +}; + &clks { assigned-clocks = <&clks IMX6QDL_PLL4_BYPASS_SRC>, <&clks IMX6QDL_PLL4_BYPASS>, @@ -444,6 +473,22 @@ >; }; + pinctrl_ipu1_csi0: ipu1csi0grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12 0x1b0b0 + MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13 0x1b0b0 + MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14 0x1b0b0 + MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15 0x1b0b0 + MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16 0x1b0b0 + MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17 0x1b0b0 + MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18 0x1b0b0 + MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19 0x1b0b0 + MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK 0x1b0b0 + MX6QDL_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC 0x1b0b0 + MX6QDL_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC 0x1b0b0 + >; + }; + pinctrl_max7310: max7310grp { fsl,pins = < MX6QDL_PAD_SD2_DAT0__GPIO1_IO15 0x1b0b0 -- cgit v1.2.3 From 0e9d528f0702ee07216a7f1d2a55cee0b23a3bba Mon Sep 17 00:00:00 2001 From: Corentin Labbe Date: Wed, 7 Jun 2017 19:33:44 +0200 Subject: ARM: sun8i: a83t: Add dt node for the syscon control module This patch add the dt node for the syscon register present on the Allwinner A83T Signed-off-by: Corentin Labbe Reviewed-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun8i-a83t.dtsi | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/sun8i-a83t.dtsi b/arch/arm/boot/dts/sun8i-a83t.dtsi index bf63e3b77572..8923ba625b76 100644 --- a/arch/arm/boot/dts/sun8i-a83t.dtsi +++ b/arch/arm/boot/dts/sun8i-a83t.dtsi @@ -165,6 +165,12 @@ #size-cells = <1>; ranges; + syscon: syscon@1c00000 { + compatible = "allwinner,sun8i-a83t-system-controller", + "syscon"; + reg = <0x01c00000 0x1000>; + }; + dma: dma-controller@1c02000 { compatible = "allwinner,sun8i-a83t-dma"; reg = <0x01c02000 0x1000>; -- cgit v1.2.3 From 723ca929a507a05bf4638f620b284f25d2047cf3 Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Sat, 10 Jun 2017 00:05:48 +0800 Subject: ARM: sun6i: a31s: primo81: Change USB OTG to OTG mode Now that we have support for the AXP221 PMIC's USB VBUS detection and DRIVEVBUS vbus control, we can use the USB OTG port in proper OTG mode. This patch enables the aforementioned PMIC functions, adds the OTG ID detection pin to the USB PHY node, and changes the mode of USB OTG to "otg". Signed-off-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun6i-a31s-primo81.dts | 16 ++++++++++++++-- 1 file changed, 14 insertions(+), 2 deletions(-) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/sun6i-a31s-primo81.dts b/arch/arm/boot/dts/sun6i-a31s-primo81.dts index f3712753fa42..73b163a7d9dd 100644 --- a/arch/arm/boot/dts/sun6i-a31s-primo81.dts +++ b/arch/arm/boot/dts/sun6i-a31s-primo81.dts @@ -158,6 +158,7 @@ reg = <0x68>; interrupt-parent = <&nmi_intc>; interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + x-powers,drive-vbus-en; }; }; @@ -226,6 +227,11 @@ regulator-name = "vddio-csi"; }; +®_drivevbus { + regulator-name = "usb0-vbus"; + status = "okay"; +}; + ®_eldo3 { regulator-min-microvolt = <1080000>; regulator-max-microvolt = <1320000>; @@ -238,12 +244,18 @@ }; &usb_otg { - /* otg support requires support for AXP221 usb-power-supply and GPIO */ - dr_mode = "host"; + dr_mode = "otg"; + status = "okay"; +}; + +&usb_power_supply { status = "okay"; }; &usbphy { + usb0_id_det-gpio = <&pio 0 15 GPIO_ACTIVE_HIGH>; /* PA15 */ + usb0_vbus_power-supply = <&usb_power_supply>; + usb0_vbus-supply = <®_drivevbus>; usb1_vbus-supply = <®_dldo1>; status = "okay"; }; -- cgit v1.2.3 From d5e9edfd37fc32098349b7753637bc1c80a16003 Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Sat, 10 Jun 2017 00:05:49 +0800 Subject: ARM: sun6i: a31s: primo81: Enable battery power supply The MSI Primo81 tablet has a 3500 mAh 3.7V LiPo battery. Enable the PMIC's battery power supply so the battery can be monitored. Signed-off-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun6i-a31s-primo81.dts | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/sun6i-a31s-primo81.dts b/arch/arm/boot/dts/sun6i-a31s-primo81.dts index 73b163a7d9dd..4c10123509c4 100644 --- a/arch/arm/boot/dts/sun6i-a31s-primo81.dts +++ b/arch/arm/boot/dts/sun6i-a31s-primo81.dts @@ -164,6 +164,10 @@ #include "axp22x.dtsi" +&battery_power_supply { + status = "okay"; +}; + ®_aldo3 { regulator-always-on; regulator-min-microvolt = <2700000>; -- cgit v1.2.3 From b6f5e70193913361d3378f9f2bb401d3d7228f34 Mon Sep 17 00:00:00 2001 From: Yuantian Tang Date: Fri, 9 Jun 2017 14:25:45 +0800 Subject: ARM: dts: ls1021a: update the clockgen node qoriq clock driver has been updated to parse the clock configuration information defined in driver itself not in dts. Since the new implementation and the bindings have been merged, it is time to update the clock related node and remove redundent clock configuration information from the dts. Signed-off-by: Tang Yuantian Signed-off-by: Shawn Guo --- arch/arm/boot/dts/ls1021a.dtsi | 90 ++++++++++++++++-------------------------- 1 file changed, 33 insertions(+), 57 deletions(-) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/ls1021a.dtsi b/arch/arm/boot/dts/ls1021a.dtsi index 45ea57fafa18..7bb9df2c1460 100644 --- a/arch/arm/boot/dts/ls1021a.dtsi +++ b/arch/arm/boot/dts/ls1021a.dtsi @@ -75,7 +75,7 @@ compatible = "arm,cortex-a7"; device_type = "cpu"; reg = <0xf00>; - clocks = <&cluster1_clk>; + clocks = <&clockgen 1 0>; #cooling-cells = <2>; }; @@ -83,10 +83,17 @@ compatible = "arm,cortex-a7"; device_type = "cpu"; reg = <0xf01>; - clocks = <&cluster1_clk>; + clocks = <&clockgen 1 0>; }; }; + sysclk: sysclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <100000000>; + clock-output-names = "sysclk"; + }; + timer { compatible = "arm,armv7-timer"; interrupts = , @@ -165,7 +172,7 @@ <0x0 0x20220520 0x0 0x4>; reg-names = "ahci", "sata-ecc"; interrupts = ; - clocks = <&platform_clk 1>; + clocks = <&clockgen 4 1>; dma-coherent; status = "disabled"; }; @@ -216,41 +223,10 @@ }; clockgen: clocking@1ee1000 { - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x0 0x0 0x1ee1000 0x10000>; - - sysclk: sysclk { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-output-names = "sysclk"; - }; - - cga_pll1: pll@800 { - compatible = "fsl,qoriq-core-pll-2.0"; - #clock-cells = <1>; - reg = <0x800 0x10>; - clocks = <&sysclk>; - clock-output-names = "cga-pll1", "cga-pll1-div2", - "cga-pll1-div4"; - }; - - platform_clk: pll@c00 { - compatible = "fsl,qoriq-core-pll-2.0"; - #clock-cells = <1>; - reg = <0xc00 0x10>; - clocks = <&sysclk>; - clock-output-names = "platform-clk", "platform-clk-div2"; - }; - - cluster1_clk: clk0c0@0 { - compatible = "fsl,qoriq-core-mux-2.0"; - #clock-cells = <0>; - reg = <0x0 0x10>; - clock-names = "pll1cga", "pll1cga-div2", "pll1cga-div4"; - clocks = <&cga_pll1 0>, <&cga_pll1 1>, <&cga_pll1 2>; - clock-output-names = "cluster1-clk"; - }; + compatible = "fsl,ls1021a-clockgen"; + reg = <0x0 0x1ee1000 0x0 0x1000>; + #clock-cells = <2>; + clocks = <&sysclk>; }; tmu: tmu@1f00000 { @@ -338,7 +314,7 @@ reg = <0x0 0x2100000 0x0 0x10000>; interrupts = ; clock-names = "dspi"; - clocks = <&platform_clk 1>; + clocks = <&clockgen 4 1>; spi-num-chipselects = <6>; big-endian; status = "disabled"; @@ -351,7 +327,7 @@ reg = <0x0 0x2110000 0x0 0x10000>; interrupts = ; clock-names = "dspi"; - clocks = <&platform_clk 1>; + clocks = <&clockgen 4 1>; spi-num-chipselects = <6>; big-endian; status = "disabled"; @@ -364,7 +340,7 @@ reg = <0x0 0x2180000 0x0 0x10000>; interrupts = ; clock-names = "i2c"; - clocks = <&platform_clk 1>; + clocks = <&clockgen 4 1>; status = "disabled"; }; @@ -375,7 +351,7 @@ reg = <0x0 0x2190000 0x0 0x10000>; interrupts = ; clock-names = "i2c"; - clocks = <&platform_clk 1>; + clocks = <&clockgen 4 1>; status = "disabled"; }; @@ -386,7 +362,7 @@ reg = <0x0 0x21a0000 0x0 0x10000>; interrupts = ; clock-names = "i2c"; - clocks = <&platform_clk 1>; + clocks = <&clockgen 4 1>; status = "disabled"; }; @@ -479,7 +455,7 @@ compatible = "fsl,ls1021a-lpuart"; reg = <0x0 0x2960000 0x0 0x1000>; interrupts = ; - clocks = <&platform_clk 1>; + clocks = <&clockgen 4 1>; clock-names = "ipg"; status = "disabled"; }; @@ -488,7 +464,7 @@ compatible = "fsl,ls1021a-lpuart"; reg = <0x0 0x2970000 0x0 0x1000>; interrupts = ; - clocks = <&platform_clk 1>; + clocks = <&clockgen 4 1>; clock-names = "ipg"; status = "disabled"; }; @@ -497,7 +473,7 @@ compatible = "fsl,ls1021a-lpuart"; reg = <0x0 0x2980000 0x0 0x1000>; interrupts = ; - clocks = <&platform_clk 1>; + clocks = <&clockgen 4 1>; clock-names = "ipg"; status = "disabled"; }; @@ -506,7 +482,7 @@ compatible = "fsl,ls1021a-lpuart"; reg = <0x0 0x2990000 0x0 0x1000>; interrupts = ; - clocks = <&platform_clk 1>; + clocks = <&clockgen 4 1>; clock-names = "ipg"; status = "disabled"; }; @@ -515,7 +491,7 @@ compatible = "fsl,ls1021a-lpuart"; reg = <0x0 0x29a0000 0x0 0x1000>; interrupts = ; - clocks = <&platform_clk 1>; + clocks = <&clockgen 4 1>; clock-names = "ipg"; status = "disabled"; }; @@ -524,7 +500,7 @@ compatible = "fsl,imx21-wdt"; reg = <0x0 0x2ad0000 0x0 0x10000>; interrupts = ; - clocks = <&platform_clk 1>; + clocks = <&clockgen 4 1>; clock-names = "wdog-en"; big-endian; }; @@ -534,8 +510,8 @@ compatible = "fsl,vf610-sai"; reg = <0x0 0x2b50000 0x0 0x10000>; interrupts = ; - clocks = <&platform_clk 1>, <&platform_clk 1>, - <&platform_clk 1>, <&platform_clk 1>; + clocks = <&clockgen 4 1>, <&clockgen 4 1>, + <&clockgen 4 1>, <&clockgen 4 1>; clock-names = "bus", "mclk1", "mclk2", "mclk3"; dma-names = "tx", "rx"; dmas = <&edma0 1 47>, @@ -548,8 +524,8 @@ compatible = "fsl,vf610-sai"; reg = <0x0 0x2b60000 0x0 0x10000>; interrupts = ; - clocks = <&platform_clk 1>, <&platform_clk 1>, - <&platform_clk 1>, <&platform_clk 1>; + clocks = <&clockgen 4 1>, <&clockgen 4 1>, + <&clockgen 4 1>, <&clockgen 4 1>; clock-names = "bus", "mclk1", "mclk2", "mclk3"; dma-names = "tx", "rx"; dmas = <&edma0 1 45>, @@ -569,16 +545,16 @@ dma-channels = <32>; big-endian; clock-names = "dmamux0", "dmamux1"; - clocks = <&platform_clk 1>, - <&platform_clk 1>; + clocks = <&clockgen 4 1>, + <&clockgen 4 1>; }; dcu: dcu@2ce0000 { compatible = "fsl,ls1021a-dcu"; reg = <0x0 0x2ce0000 0x0 0x10000>; interrupts = ; - clocks = <&platform_clk 0>, - <&platform_clk 0>; + clocks = <&clockgen 4 0>, + <&clockgen 4 0>; clock-names = "dcu", "pix"; big-endian; status = "disabled"; -- cgit v1.2.3 From 82d1afbce1e021819b913d9f6a314c3b12b56ed8 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Tue, 13 Jun 2017 15:47:06 +0200 Subject: ARM: dts: exynos: add needs-hpd to &hdmicec for Odroid-U3 The Odroid-U3 board has an IP4791CZ12 level shifter that is disabled if the HPD is low, which means that the CEC pin is disabled as well. Signed-off-by: Hans Verkuil Signed-off-by: Krzysztof Kozlowski --- arch/arm/boot/dts/exynos4412-odroidu3.dts | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/exynos4412-odroidu3.dts b/arch/arm/boot/dts/exynos4412-odroidu3.dts index 7504a5aa538e..44a4de08466b 100644 --- a/arch/arm/boot/dts/exynos4412-odroidu3.dts +++ b/arch/arm/boot/dts/exynos4412-odroidu3.dts @@ -78,6 +78,10 @@ regulator-max-microvolt = <3300000>; }; +&hdmicec { + needs-hpd; +}; + /* VDDQ for MSHC (eMMC card) */ &ldo22_reg { regulator-name = "LDO22_VDDQ_MMC4_2.8V"; -- cgit v1.2.3 From bc8ebb86392dc2e81abee68c4e569f8d23628603 Mon Sep 17 00:00:00 2001 From: Hoegeun Kwon Date: Thu, 15 Jun 2017 19:03:29 +0900 Subject: ARM: dts: exynos: Fix polarity of panel reset gpio in Rinato This reset gpio is active low, therefore fix from active high to low. Signed-off-by: Hoegeun Kwon Signed-off-by: Krzysztof Kozlowski --- arch/arm/boot/dts/exynos3250-rinato.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/exynos3250-rinato.dts b/arch/arm/boot/dts/exynos3250-rinato.dts index 118235b72e90..443e0c98dc73 100644 --- a/arch/arm/boot/dts/exynos3250-rinato.dts +++ b/arch/arm/boot/dts/exynos3250-rinato.dts @@ -240,7 +240,7 @@ reg = <0>; vdd3-supply = <&ldo16_reg>; vci-supply = <&ldo20_reg>; - reset-gpios = <&gpe0 1 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpe0 1 GPIO_ACTIVE_LOW>; te-gpios = <&gpx0 6 GPIO_ACTIVE_HIGH>; power-on-delay= <30>; power-off-delay= <120>; -- cgit v1.2.3 From 79eb80b70c4e05defb4d6f6e68840a052e73ae2d Mon Sep 17 00:00:00 2001 From: Martin Blumenstingl Date: Sat, 10 Jun 2017 00:20:39 +0200 Subject: ARM: dts: meson8: fix the IR receiver pins The IR receiver pins are currently defined in the CBUS pin-controller. However the pins are in the AO region, which is controlled by the AOBUS pin-controller. Move the pins to pinctrl_aobus so they can actually be used. Fixes: b60e1157d8fa ("ARM: dts: amlogic: Split pinctrl device for Meson8 / Meson8b") Signed-off-by: Martin Blumenstingl Reviewed-by: Neil Armstrong Signed-off-by: Kevin Hilman --- arch/arm/boot/dts/meson8.dtsi | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/meson8.dtsi b/arch/arm/boot/dts/meson8.dtsi index 9b0b3ddbb17e..e4f7357b4b31 100644 --- a/arch/arm/boot/dts/meson8.dtsi +++ b/arch/arm/boot/dts/meson8.dtsi @@ -116,6 +116,13 @@ function = "i2c_mst_ao"; }; }; + + ir_recv_pins: remote { + mux { + groups = "remote_input"; + function = "remote"; + }; + }; }; }; @@ -151,13 +158,6 @@ }; }; - ir_recv_pins: remote { - mux { - groups = "remote_input"; - function = "remote"; - }; - }; - eth_pins: ethernet { mux { groups = "eth_tx_clk_50m", "eth_tx_en", -- cgit v1.2.3 From 7a16f06b90ab73343af982ded3ac2710259c37aa Mon Sep 17 00:00:00 2001 From: Martin Blumenstingl Date: Thu, 15 Jun 2017 23:33:43 +0200 Subject: ARM: dts: meson: use C preprocessor friendly include syntax This replaces the "/include/" syntax with the "#include" syntax in all Amlogic Meson .dts and .dtsi files. That is required to use preprocessor defines (like GIC_SPI and IRQ_TYPE_EDGE_RISING) in meson.dtsi (all files which directly or indirectly include meson.dtsi need to use the "#include" syntax, otherwise the .dts files cannot be compiled). Signed-off-by: Martin Blumenstingl Signed-off-by: Kevin Hilman --- arch/arm/boot/dts/meson6-atv1200.dts | 2 +- arch/arm/boot/dts/meson6.dtsi | 2 +- arch/arm/boot/dts/meson8.dtsi | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/meson6-atv1200.dts b/arch/arm/boot/dts/meson6-atv1200.dts index 1237faa63ce6..9444b0d9628f 100644 --- a/arch/arm/boot/dts/meson6-atv1200.dts +++ b/arch/arm/boot/dts/meson6-atv1200.dts @@ -46,7 +46,7 @@ */ /dts-v1/; -/include/ "meson6.dtsi" +#include "meson6.dtsi" / { model = "Geniatech ATV1200"; diff --git a/arch/arm/boot/dts/meson6.dtsi b/arch/arm/boot/dts/meson6.dtsi index b0fc91ffd6a1..8557b6117a4b 100644 --- a/arch/arm/boot/dts/meson6.dtsi +++ b/arch/arm/boot/dts/meson6.dtsi @@ -45,7 +45,7 @@ * OTHER DEALINGS IN THE SOFTWARE. */ -/include/ "meson.dtsi" +#include "meson.dtsi" / { model = "Amlogic Meson6 SoC"; diff --git a/arch/arm/boot/dts/meson8.dtsi b/arch/arm/boot/dts/meson8.dtsi index e4f7357b4b31..c5d73b999773 100644 --- a/arch/arm/boot/dts/meson8.dtsi +++ b/arch/arm/boot/dts/meson8.dtsi @@ -45,7 +45,7 @@ #include #include -/include/ "meson.dtsi" +#include "meson.dtsi" / { model = "Amlogic Meson8 SoC"; -- cgit v1.2.3 From 5239e0504826d4b2ca7c225cc32d1a1a9e755453 Mon Sep 17 00:00:00 2001 From: Martin Blumenstingl Date: Thu, 15 Jun 2017 23:33:44 +0200 Subject: ARM: dts: meson: use GIC_SPI and IRQ_TYPE_EDGE_RISING macros This makes meson.dtsi easier to read as we are not using magic numbers for the GIC interrupt type (GIC_SPI) and the interrupt polarity (IRQ_TYPE_EDGE_RISING). Signed-off-by: Martin Blumenstingl Signed-off-by: Kevin Hilman --- arch/arm/boot/dts/meson.dtsi | 24 +++++++++++++----------- 1 file changed, 13 insertions(+), 11 deletions(-) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/meson.dtsi b/arch/arm/boot/dts/meson.dtsi index 8d9c36970dfd..d287f606e06f 100644 --- a/arch/arm/boot/dts/meson.dtsi +++ b/arch/arm/boot/dts/meson.dtsi @@ -45,6 +45,8 @@ * OTHER DEALINGS IN THE SOFTWARE. */ +#include +#include /include/ "skeleton.dtsi" / { @@ -81,21 +83,21 @@ uart_A: serial@84c0 { compatible = "amlogic,meson-uart"; reg = <0x84c0 0x18>; - interrupts = <0 26 1>; + interrupts = ; status = "disabled"; }; uart_B: serial@84dc { compatible = "amlogic,meson-uart"; reg = <0x84dc 0x18>; - interrupts = <0 75 1>; + interrupts = ; status = "disabled"; }; i2c_A: i2c@8500 { compatible = "amlogic,meson6-i2c"; reg = <0x8500 0x20>; - interrupts = <0 21 1>; + interrupts = ; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -104,14 +106,14 @@ uart_C: serial@8700 { compatible = "amlogic,meson-uart"; reg = <0x8700 0x18>; - interrupts = <0 93 1>; + interrupts = ; status = "disabled"; }; i2c_B: i2c@87c0 { compatible = "amlogic,meson6-i2c"; reg = <0x87c0 0x20>; - interrupts = <0 128 1>; + interrupts = ; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -128,13 +130,13 @@ wdt: watchdog@9900 { compatible = "amlogic,meson6-wdt"; reg = <0x9900 0x8>; - interrupts = <0 0 1>; + interrupts = ; }; timer@9940 { compatible = "amlogic,meson6-timer"; reg = <0x9940 0x18>; - interrupts = <0 10 1>; + interrupts = ; }; }; @@ -148,21 +150,21 @@ ir_receiver: ir-receiver@480 { compatible= "amlogic,meson6-ir"; reg = <0x480 0x20>; - interrupts = <0 15 1>; + interrupts = ; status = "disabled"; }; uart_AO: serial@4c0 { compatible = "amlogic,meson-uart"; reg = <0x4c0 0x18>; - interrupts = <0 90 1>; + interrupts = ; status = "disabled"; }; i2c_AO: i2c@500 { compatible = "amlogic,meson6-i2c"; reg = <0x500 0x20>; - interrupts = <0 92 1>; + interrupts = ; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -173,7 +175,7 @@ compatible = "amlogic,meson6-dwmac", "snps,dwmac"; reg = <0xc9410000 0x10000 0xc1108108 0x4>; - interrupts = <0 8 1>; + interrupts = ; interrupt-names = "macirq"; status = "disabled"; }; -- cgit v1.2.3 From 192ec775f5b1530b4394de6236aa72f1dc69422e Mon Sep 17 00:00:00 2001 From: Martin Blumenstingl Date: Thu, 15 Jun 2017 23:33:45 +0200 Subject: ARM: dts: meson8: add the PWM_E and PWM_F pins This adds the definition of the PWM_E (CBUS) and PWM_F (AOBUS) to meson8.dtsi, allowing devices to use them. PWM_E can be used on some devices to generate the 32.768kHz clock for the SDIO wifi module, while PWM_F can be used to control the power LED. Signed-off-by: Martin Blumenstingl Reviewed-by: Neil Armstrong Signed-off-by: Kevin Hilman --- arch/arm/boot/dts/meson8.dtsi | 14 ++++++++++++++ 1 file changed, 14 insertions(+) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/meson8.dtsi b/arch/arm/boot/dts/meson8.dtsi index c5d73b999773..5ff7903964c6 100644 --- a/arch/arm/boot/dts/meson8.dtsi +++ b/arch/arm/boot/dts/meson8.dtsi @@ -123,6 +123,13 @@ function = "remote"; }; }; + + pwm_f_ao_pins: pwm-f-ao { + mux { + groups = "pwm_f_ao"; + function = "pwm_f_ao"; + }; + }; }; }; @@ -168,6 +175,13 @@ function = "ethernet"; }; }; + + pwm_e_pins: pwm-e { + mux { + groups = "pwm_e"; + function = "pwm_e"; + }; + }; }; }; -- cgit v1.2.3 From d42ce5a98dcd7ffc59699127d0597c17859f347d Mon Sep 17 00:00:00 2001 From: Martin Blumenstingl Date: Thu, 15 Jun 2017 23:33:46 +0200 Subject: ARM: dts: meson8: add the pins for the SDIO controller Signed-off-by: Martin Blumenstingl Reviewed-by: Neil Armstrong Signed-off-by: Kevin Hilman --- arch/arm/boot/dts/meson8.dtsi | 24 ++++++++++++++++++++++++ 1 file changed, 24 insertions(+) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/meson8.dtsi b/arch/arm/boot/dts/meson8.dtsi index 5ff7903964c6..bb3608bddc98 100644 --- a/arch/arm/boot/dts/meson8.dtsi +++ b/arch/arm/boot/dts/meson8.dtsi @@ -158,6 +158,30 @@ gpio-ranges = <&pinctrl_cbus 0 0 120>; }; + sd_a_pins: sd-a { + mux { + groups = "sd_d0_a", "sd_d1_a", "sd_d2_a", + "sd_d3_a", "sd_clk_a", "sd_cmd_a"; + function = "sd_a"; + }; + }; + + sd_b_pins: sd-b { + mux { + groups = "sd_d0_b", "sd_d1_b", "sd_d2_b", + "sd_d3_b", "sd_clk_b", "sd_cmd_b"; + function = "sd_b"; + }; + }; + + sd_c_pins: sd-c { + mux { + groups = "sd_d0_c", "sd_d1_c", "sd_d2_c", + "sd_d3_c", "sd_clk_c", "sd_cmd_c"; + function = "sd_c"; + }; + }; + spi_nor_pins: nor { mux { groups = "nor_d", "nor_q", "nor_c", "nor_cs"; -- cgit v1.2.3 From a39a3b9f4ff0aba7c2c475afaa52a3eb52d2b9ad Mon Sep 17 00:00:00 2001 From: Martin Blumenstingl Date: Thu, 15 Jun 2017 23:33:47 +0200 Subject: ARM: dts: meson: add the SAR ADC This adds the SAR ADC to meson.dtsi and configures the clocks on Meson8 and Meson8b to allow boards to use it. Some boards use it to connect a button to it. Signed-off-by: Martin Blumenstingl Reviewed-by: Neil Armstrong Signed-off-by: Kevin Hilman --- arch/arm/boot/dts/meson.dtsi | 8 ++++++++ arch/arm/boot/dts/meson8.dtsi | 8 ++++++++ arch/arm/boot/dts/meson8b.dtsi | 8 ++++++++ 3 files changed, 24 insertions(+) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/meson.dtsi b/arch/arm/boot/dts/meson.dtsi index d287f606e06f..46706d74a145 100644 --- a/arch/arm/boot/dts/meson.dtsi +++ b/arch/arm/boot/dts/meson.dtsi @@ -103,6 +103,14 @@ status = "disabled"; }; + saradc: adc@8680 { + compatible = "amlogic,meson-saradc"; + reg = <0x8680 0x34>; + #io-channel-cells = <1>; + interrupts = ; + status = "disabled"; + }; + uart_C: serial@8700 { compatible = "amlogic,meson-uart"; reg = <0x8700 0x18>; diff --git a/arch/arm/boot/dts/meson8.dtsi b/arch/arm/boot/dts/meson8.dtsi index bb3608bddc98..6687b1b4c7c9 100644 --- a/arch/arm/boot/dts/meson8.dtsi +++ b/arch/arm/boot/dts/meson8.dtsi @@ -232,6 +232,14 @@ arm,filter-ranges = <0x100000 0xc0000000>; }; +&saradc { + compatible = "amlogic,meson8-saradc", "amlogic,meson-saradc"; + clocks = <&clkc CLKID_XTAL>, + <&clkc CLKID_SAR_ADC>, + <&clkc CLKID_SANA>; + clock-names = "clkin", "core", "sana"; +}; + &spifc { clocks = <&clkc CLKID_CLK81>; }; diff --git a/arch/arm/boot/dts/meson8b.dtsi b/arch/arm/boot/dts/meson8b.dtsi index d9f116a418b2..1c09090ff4a5 100644 --- a/arch/arm/boot/dts/meson8b.dtsi +++ b/arch/arm/boot/dts/meson8b.dtsi @@ -177,6 +177,14 @@ arm,filter-ranges = <0x100000 0xc0000000>; }; +&saradc { + compatible = "amlogic,meson8b-saradc", "amlogic,meson-saradc"; + clocks = <&clkc CLKID_XTAL>, + <&clkc CLKID_SAR_ADC>, + <&clkc CLKID_SANA>; + clock-names = "clkin", "core", "sana"; +}; + &uart_AO { clocks = <&clkc CLKID_CLK81>; }; -- cgit v1.2.3 From 8a7f0c52e8a07ac31784a2dd62c001d38843dfe6 Mon Sep 17 00:00:00 2001 From: Martin Blumenstingl Date: Thu, 15 Jun 2017 23:33:48 +0200 Subject: ARM: dts: meson8: add reserved memory zones There seem to be two memory regions that need to be reserved, otherwise the system just hangs when running: $ stress --vm-bytes $(awk '/MemFree/{printf "%d\n", $2 * 0.9;}' < /proc/meminfo)k \ --vm-keep -m 1 The first memory region is really crucial and without it the system hangs. I could not find any references to this in Amlogic's GPL kernel sources. The second region is used by the "suspend firmware". The u-boot sources (/arch/arm/cpu/aml_meson/m8/firmwareld.c) state that the suspend firmware is located at "64M + 15M" which matches CONFIG_MESON_SUSPEND in the Amlogic GPL kernel sources. The "suspend firmware" is responsible for waking up the system from suspend state. This also fixes reading the full SD card as without this the system would simply hang (probably related to the first memory region, if some buffer is allocated there). Signed-off-by: Martin Blumenstingl Signed-off-by: Kevin Hilman --- arch/arm/boot/dts/meson8.dtsi | 27 +++++++++++++++++++++++++++ 1 file changed, 27 insertions(+) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/meson8.dtsi b/arch/arm/boot/dts/meson8.dtsi index 6687b1b4c7c9..df79a34a3530 100644 --- a/arch/arm/boot/dts/meson8.dtsi +++ b/arch/arm/boot/dts/meson8.dtsi @@ -83,6 +83,33 @@ reg = <0x203>; }; }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + /* 2 MiB reserved for Hardware ROM Firmware? */ + hwrom@0 { + reg = <0x0 0x200000>; + no-map; + }; + + /* + * 1 MiB reserved for the "ARM Power Firmware": this is ARM + * code which is responsible for system suspend. It loads a + * piece of ARC code ("arc_power" in the vendor u-boot tree) + * into SRAM, executes that and shuts down the (last) ARM core. + * The arc_power firmware then checks various wakeup sources + * (IR remote receiver, HDMI CEC, WIFI and Bluetooth wakeup or + * simply the power key) and re-starts the ARM core once it + * detects a wakeup request. + */ + power-firmware@4f00000 { + reg = <0x4f00000 0x100000>; + no-map; + }; + }; }; /* end of / */ &aobus { -- cgit v1.2.3 From a35910d3994a6d1f59b140dea6b00b8a7b134878 Mon Sep 17 00:00:00 2001 From: Martin Blumenstingl Date: Thu, 15 Jun 2017 23:33:49 +0200 Subject: ARM: dts: meson: add the hardware random number generator All supported Meson SoCs have a random number generator in CBUS. Newer SoCs (GXBB, GXL and GXM) provide only one 32-bit random number register, whereas the older SoCs (Meson6, Meson8 and Meson8b) have two 32-bit random number registers. The existing meson-rng driver only supports the lower 32-bit - but it still works fine on the older SoCs apart from this small limitation. Signed-off-by: Martin Blumenstingl Reviewed-by: Neil Armstrong Signed-off-by: Kevin Hilman --- arch/arm/boot/dts/meson.dtsi | 5 +++++ arch/arm/boot/dts/meson8.dtsi | 6 ++++++ arch/arm/boot/dts/meson8b.dtsi | 6 ++++++ 3 files changed, 17 insertions(+) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/meson.dtsi b/arch/arm/boot/dts/meson.dtsi index 46706d74a145..bf37606ba82e 100644 --- a/arch/arm/boot/dts/meson.dtsi +++ b/arch/arm/boot/dts/meson.dtsi @@ -80,6 +80,11 @@ #size-cells = <1>; ranges = <0x0 0xc1100000 0x200000>; + hwrng: rng@8100 { + compatible = "amlogic,meson-rng"; + reg = <0x8100 0x8>; + }; + uart_A: serial@84c0 { compatible = "amlogic,meson-uart"; reg = <0x84c0 0x18>; diff --git a/arch/arm/boot/dts/meson8.dtsi b/arch/arm/boot/dts/meson8.dtsi index df79a34a3530..b4c5fdd7b451 100644 --- a/arch/arm/boot/dts/meson8.dtsi +++ b/arch/arm/boot/dts/meson8.dtsi @@ -241,6 +241,12 @@ clock-names = "stmmaceth"; }; +&hwrng { + compatible = "amlogic,meson8-rng", "amlogic,meson-rng"; + clocks = <&clkc CLKID_RNG0>; + clock-names = "core"; +}; + &i2c_AO { clocks = <&clkc CLKID_CLK81>; }; diff --git a/arch/arm/boot/dts/meson8b.dtsi b/arch/arm/boot/dts/meson8b.dtsi index 1c09090ff4a5..a9d7074e6369 100644 --- a/arch/arm/boot/dts/meson8b.dtsi +++ b/arch/arm/boot/dts/meson8b.dtsi @@ -171,6 +171,12 @@ }; }; +&hwrng { + compatible = "amlogic,meson8b-rng", "amlogic,meson-rng"; + clocks = <&clkc CLKID_RNG0>; + clock-names = "core"; +}; + &L2 { arm,data-latency = <3 3 3>; arm,tag-latency = <2 2 2>; -- cgit v1.2.3 From e29b1cf87473811584c8cf02d624954d7784fa5a Mon Sep 17 00:00:00 2001 From: Martin Blumenstingl Date: Thu, 15 Jun 2017 23:33:50 +0200 Subject: ARM: dts: meson: add USB support on Meson8 and Meson8b This adds the DWC2 USB controller nodes and the corresponding USB2 PHY nodes to meson.dtsi (as the same - or at least a very similar) IP block is used on all SoCs (at the same physical address). Additionally meson8.dtsi and meson8b.dtsi add the required clocks to the DWC2 and USB2 PHY nodes, otherwise the DWC2 controller cannot be initialized by the dwc2 driver. Signed-off-by: Martin Blumenstingl Reviewed-by: Neil Armstrong Signed-off-by: Kevin Hilman --- arch/arm/boot/dts/meson.dtsi | 38 ++++++++++++++++++++++++++++++++++++++ arch/arm/boot/dts/meson8.dtsi | 24 ++++++++++++++++++++++++ arch/arm/boot/dts/meson8b.dtsi | 26 ++++++++++++++++++++++++++ 3 files changed, 88 insertions(+) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/meson.dtsi b/arch/arm/boot/dts/meson.dtsi index bf37606ba82e..15204e44161d 100644 --- a/arch/arm/boot/dts/meson.dtsi +++ b/arch/arm/boot/dts/meson.dtsi @@ -132,6 +132,20 @@ status = "disabled"; }; + usb0_phy: phy@8800 { + compatible = "amlogic,meson-mx-usb2-phy"; + #phy-cells = <0>; + reg = <0x8800 0x20>; + status = "disabled"; + }; + + usb1_phy: phy@8820 { + compatible = "amlogic,meson-mx-usb2-phy"; + #phy-cells = <0>; + reg = <0x8820 0x20>; + status = "disabled"; + }; + spifc: spi@8c80 { compatible = "amlogic,meson6-spifc"; reg = <0x8c80 0x80>; @@ -184,6 +198,30 @@ }; }; + usb0: usb@c9040000 { + compatible = "snps,dwc2"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0xc9040000 0x40000>; + interrupts = ; + phys = <&usb0_phy>; + phy-names = "usb2-phy"; + dr_mode = "host"; + status = "disabled"; + }; + + usb1: usb@c90c0000 { + compatible = "snps,dwc2"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0xc90c0000 0x40000>; + interrupts = ; + phys = <&usb1_phy>; + phy-names = "usb2-phy"; + dr_mode = "host"; + status = "disabled"; + }; + ethmac: ethernet@c9410000 { compatible = "amlogic,meson6-dwmac", "snps,dwmac"; reg = <0xc9410000 0x10000 diff --git a/arch/arm/boot/dts/meson8.dtsi b/arch/arm/boot/dts/meson8.dtsi index b4c5fdd7b451..17a4c6255589 100644 --- a/arch/arm/boot/dts/meson8.dtsi +++ b/arch/arm/boot/dts/meson8.dtsi @@ -292,3 +292,27 @@ &uart_C { clocks = <&clkc CLKID_CLK81>; }; + +&usb0 { + compatible = "amlogic,meson8-usb", "snps,dwc2"; + clocks = <&clkc CLKID_USB0_DDR_BRIDGE>; + clock-names = "otg"; +}; + +&usb1 { + compatible = "amlogic,meson8-usb", "snps,dwc2"; + clocks = <&clkc CLKID_USB1_DDR_BRIDGE>; + clock-names = "otg"; +}; + +&usb0_phy { + compatible = "amlogic,meson8-usb2-phy", "amlogic,meson-mx-usb2-phy"; + clocks = <&clkc CLKID_USB>, <&clkc CLKID_USB0>; + clock-names = "usb_general", "usb"; +}; + +&usb1_phy { + compatible = "amlogic,meson8-usb2-phy", "amlogic,meson-mx-usb2-phy"; + clocks = <&clkc CLKID_USB>, <&clkc CLKID_USB1>; + clock-names = "usb_general", "usb"; +}; diff --git a/arch/arm/boot/dts/meson8b.dtsi b/arch/arm/boot/dts/meson8b.dtsi index a9d7074e6369..521be5dfa8ef 100644 --- a/arch/arm/boot/dts/meson8b.dtsi +++ b/arch/arm/boot/dts/meson8b.dtsi @@ -206,3 +206,29 @@ &uart_C { clocks = <&clkc CLKID_CLK81>; }; + +&usb0 { + compatible = "amlogic,meson8b-usb", "snps,dwc2"; + clocks = <&clkc CLKID_USB0_DDR_BRIDGE>; + clock-names = "otg"; +}; + +&usb1 { + compatible = "amlogic,meson8b-usb", "snps,dwc2"; + clocks = <&clkc CLKID_USB1_DDR_BRIDGE>; + clock-names = "otg"; +}; + +&usb0_phy { + compatible = "amlogic,meson8b-usb2-phy", "amlogic,meson-mx-usb2-phy"; + clocks = <&clkc CLKID_USB>, <&clkc CLKID_USB0>; + clock-names = "usb_general", "usb"; + resets = <&reset RESET_USB_OTG>; +}; + +&usb1_phy { + compatible = "amlogic,meson8b-usb2-phy", "amlogic,meson-mx-usb2-phy"; + clocks = <&clkc CLKID_USB>, <&clkc CLKID_USB1>; + clock-names = "usb_general", "usb"; + resets = <&reset RESET_USB_OTG>; +}; -- cgit v1.2.3 From d8dd3d29d02cb04f37098b10ede5251764f06754 Mon Sep 17 00:00:00 2001 From: Martin Blumenstingl Date: Thu, 15 Jun 2017 23:33:51 +0200 Subject: ARM: dts: meson8b: add the SCU device node Amlogic's Meson8b SoC has a Snoop Control Unit (SCU), just like many other Cortex-A5 SoCs. Add the corresponding devicetree node so it can be used during SMP boot. Signed-off-by: Martin Blumenstingl Reviewed-by: Neil Armstrong Signed-off-by: Kevin Hilman --- arch/arm/boot/dts/meson8.dtsi | 5 +++++ arch/arm/boot/dts/meson8b.dtsi | 5 +++++ 2 files changed, 10 insertions(+) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/meson8.dtsi b/arch/arm/boot/dts/meson8.dtsi index 17a4c6255589..dfe83364eceb 100644 --- a/arch/arm/boot/dts/meson8.dtsi +++ b/arch/arm/boot/dts/meson8.dtsi @@ -110,6 +110,11 @@ no-map; }; }; + + scu@c4300000 { + compatible = "arm,cortex-a9-scu"; + reg = <0xc4300000 0x100>; + }; }; /* end of / */ &aobus { diff --git a/arch/arm/boot/dts/meson8b.dtsi b/arch/arm/boot/dts/meson8b.dtsi index 521be5dfa8ef..173b12a999e6 100644 --- a/arch/arm/boot/dts/meson8b.dtsi +++ b/arch/arm/boot/dts/meson8b.dtsi @@ -82,6 +82,11 @@ reg = <0x203>; }; }; + + scu@c4300000 { + compatible = "arm,cortex-a5-scu"; + reg = <0xc4300000 0x100>; + }; }; /* end of / */ &aobus { -- cgit v1.2.3 From f28d4bdb74b6fec482cdbba032369a185baa74b9 Mon Sep 17 00:00:00 2001 From: Martin Blumenstingl Date: Thu, 15 Jun 2017 23:33:52 +0200 Subject: ARM: dts: meson: use the real ethernet clock on Meson8 and Meson8b Until now clk81 was used as gate clock for the ethernet controller on Meson8 whereas Meson8b did not configure a gate clock at all. Use CLKID_ETH for both SoCs, which is the real gate clock for the ethernet controller. Signed-off-by: Martin Blumenstingl Reviewed-by: Neil Armstrong Signed-off-by: Kevin Hilman --- arch/arm/boot/dts/meson8.dtsi | 2 +- arch/arm/boot/dts/meson8b.dtsi | 5 +++++ 2 files changed, 6 insertions(+), 1 deletion(-) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/meson8.dtsi b/arch/arm/boot/dts/meson8.dtsi index dfe83364eceb..cada35828931 100644 --- a/arch/arm/boot/dts/meson8.dtsi +++ b/arch/arm/boot/dts/meson8.dtsi @@ -242,7 +242,7 @@ }; ðmac { - clocks = <&clkc CLKID_CLK81>; + clocks = <&clkc CLKID_ETH>; clock-names = "stmmaceth"; }; diff --git a/arch/arm/boot/dts/meson8b.dtsi b/arch/arm/boot/dts/meson8b.dtsi index 173b12a999e6..72e4f425f190 100644 --- a/arch/arm/boot/dts/meson8b.dtsi +++ b/arch/arm/boot/dts/meson8b.dtsi @@ -176,6 +176,11 @@ }; }; +ðmac { + clocks = <&clkc CLKID_ETH>; + clock-names = "stmmaceth"; +}; + &hwrng { compatible = "amlogic,meson8b-rng", "amlogic,meson-rng"; clocks = <&clkc CLKID_RNG0>; -- cgit v1.2.3 From 0c8c9ff8ec8eb1b41817bd547895e360b66853d6 Mon Sep 17 00:00:00 2001 From: Andrew Lunn Date: Thu, 1 Jun 2017 22:09:26 +0200 Subject: ARM: dts: mvebu: Add PWM properties to .dtsi files Add properties to the GPIO nodes for Armada 370/XP to allow them to be also used as PWM lines. Signed-off-by: Andrew Lunn URL: https://patchwork.ozlabs.org/patch/427294/ [Ralph Sennhauser: Add new compatible string marvell,armada-370-gpio] Signed-off-by: Ralph Sennhauser Tested-by: Andrew Lunn Acked-by: Linus Walleij Signed-off-by: Gregory CLEMENT --- arch/arm/boot/dts/armada-370.dtsi | 19 ++++++++++++++----- arch/arm/boot/dts/armada-xp-mv78230.dtsi | 16 ++++++++++++---- arch/arm/boot/dts/armada-xp-mv78260.dtsi | 19 ++++++++++++++----- arch/arm/boot/dts/armada-xp-mv78460.dtsi | 19 ++++++++++++++----- 4 files changed, 54 insertions(+), 19 deletions(-) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/armada-370.dtsi b/arch/arm/boot/dts/armada-370.dtsi index cc011c8bc36b..f9cf1273f35e 100644 --- a/arch/arm/boot/dts/armada-370.dtsi +++ b/arch/arm/boot/dts/armada-370.dtsi @@ -137,29 +137,38 @@ }; gpio0: gpio@18100 { - compatible = "marvell,orion-gpio"; - reg = <0x18100 0x40>; + compatible = "marvell,armada-370-gpio", + "marvell,orion-gpio"; + reg = <0x18100 0x40>, <0x181c0 0x08>; + reg-names = "gpio", "pwm"; ngpios = <32>; gpio-controller; #gpio-cells = <2>; + #pwm-cells = <2>; interrupt-controller; #interrupt-cells = <2>; interrupts = <82>, <83>, <84>, <85>; + clocks = <&coreclk 0>; }; gpio1: gpio@18140 { - compatible = "marvell,orion-gpio"; - reg = <0x18140 0x40>; + compatible = "marvell,armada-370-gpio", + "marvell,orion-gpio"; + reg = <0x18140 0x40>, <0x181c8 0x08>; + reg-names = "gpio", "pwm"; ngpios = <32>; gpio-controller; #gpio-cells = <2>; + #pwm-cells = <2>; interrupt-controller; #interrupt-cells = <2>; interrupts = <87>, <88>, <89>, <90>; + clocks = <&coreclk 0>; }; gpio2: gpio@18180 { - compatible = "marvell,orion-gpio"; + compatible = "marvell,armada-370-gpio", + "marvell,orion-gpio"; reg = <0x18180 0x40>; ngpios = <2>; gpio-controller; diff --git a/arch/arm/boot/dts/armada-xp-mv78230.dtsi b/arch/arm/boot/dts/armada-xp-mv78230.dtsi index 07c5090ecd29..9f25814077f2 100644 --- a/arch/arm/boot/dts/armada-xp-mv78230.dtsi +++ b/arch/arm/boot/dts/armada-xp-mv78230.dtsi @@ -202,25 +202,33 @@ internal-regs { gpio0: gpio@18100 { - compatible = "marvell,orion-gpio"; - reg = <0x18100 0x40>; + compatible = "marvell,armada-370-gpio", + "marvell,orion-gpio"; + reg = <0x18100 0x40>, <0x181c0 0x08>; + reg-names = "gpio", "pwm"; ngpios = <32>; gpio-controller; #gpio-cells = <2>; + #pwm-cells = <2>; interrupt-controller; #interrupt-cells = <2>; interrupts = <82>, <83>, <84>, <85>; + clocks = <&coreclk 0>; }; gpio1: gpio@18140 { - compatible = "marvell,orion-gpio"; - reg = <0x18140 0x40>; + compatible = "marvell,armada-370-gpio", + "marvell,orion-gpio"; + reg = <0x18140 0x40>, <0x181c8 0x08>; + reg-names = "gpio", "pwm"; ngpios = <17>; gpio-controller; #gpio-cells = <2>; + #pwm-cells = <2>; interrupt-controller; #interrupt-cells = <2>; interrupts = <87>, <88>, <89>; + clocks = <&coreclk 0>; }; }; }; diff --git a/arch/arm/boot/dts/armada-xp-mv78260.dtsi b/arch/arm/boot/dts/armada-xp-mv78260.dtsi index 64e936ae7b22..2bfe07aebf1a 100644 --- a/arch/arm/boot/dts/armada-xp-mv78260.dtsi +++ b/arch/arm/boot/dts/armada-xp-mv78260.dtsi @@ -285,29 +285,38 @@ internal-regs { gpio0: gpio@18100 { - compatible = "marvell,orion-gpio"; - reg = <0x18100 0x40>; + compatible = "marvell,armada-370-gpio", + "marvell,orion-gpio"; + reg = <0x18100 0x40>, <0x181c0 0x08>; + reg-names = "gpio", "pwm"; ngpios = <32>; gpio-controller; #gpio-cells = <2>; + #pwm-cells = <2>; interrupt-controller; #interrupt-cells = <2>; interrupts = <82>, <83>, <84>, <85>; + clocks = <&coreclk 0>; }; gpio1: gpio@18140 { - compatible = "marvell,orion-gpio"; - reg = <0x18140 0x40>; + compatible = "marvell,armada-370-gpio", + "marvell,orion-gpio"; + reg = <0x18140 0x40>, <0x181c8 0x08>; + reg-names = "gpio", "pwm"; ngpios = <32>; gpio-controller; #gpio-cells = <2>; + #pwm-cells = <2>; interrupt-controller; #interrupt-cells = <2>; interrupts = <87>, <88>, <89>, <90>; + clocks = <&coreclk 0>; }; gpio2: gpio@18180 { - compatible = "marvell,orion-gpio"; + compatible = "marvell,armada-370-gpio", + "marvell,orion-gpio"; reg = <0x18180 0x40>; ngpios = <3>; gpio-controller; diff --git a/arch/arm/boot/dts/armada-xp-mv78460.dtsi b/arch/arm/boot/dts/armada-xp-mv78460.dtsi index d1383dde43eb..6c33935f7074 100644 --- a/arch/arm/boot/dts/armada-xp-mv78460.dtsi +++ b/arch/arm/boot/dts/armada-xp-mv78460.dtsi @@ -323,29 +323,38 @@ internal-regs { gpio0: gpio@18100 { - compatible = "marvell,orion-gpio"; - reg = <0x18100 0x40>; + compatible = "marvell,armada-370-gpio", + "marvell,orion-gpio"; + reg = <0x18100 0x40>, <0x181c0 0x08>; + reg-names = "gpio", "pwm"; ngpios = <32>; gpio-controller; #gpio-cells = <2>; + #pwm-cells = <2>; interrupt-controller; #interrupt-cells = <2>; interrupts = <82>, <83>, <84>, <85>; + clocks = <&coreclk 0>; }; gpio1: gpio@18140 { - compatible = "marvell,orion-gpio"; - reg = <0x18140 0x40>; + compatible = "marvell,armada-370-gpio", + "marvell,orion-gpio"; + reg = <0x18140 0x40>, <0x181c8 0x08>; + reg-names = "gpio", "pwm"; ngpios = <32>; gpio-controller; #gpio-cells = <2>; + #pwm-cells = <2>; interrupt-controller; #interrupt-cells = <2>; interrupts = <87>, <88>, <89>, <90>; + clocks = <&coreclk 0>; }; gpio2: gpio@18180 { - compatible = "marvell,orion-gpio"; + compatible = "marvell,armada-370-gpio", + "marvell,orion-gpio"; reg = <0x18180 0x40>; ngpios = <3>; gpio-controller; -- cgit v1.2.3 From 7cb2acb3fbae5e499a619406a13fe856e3b0b07a Mon Sep 17 00:00:00 2001 From: Ralph Sennhauser Date: Thu, 1 Jun 2017 22:10:30 +0200 Subject: ARM: dts: mvebu: Add PWM properties for armada-38x Add the required properties to the GPIO nodes for them to be used as PWM lines. Signed-off-by: Ralph Sennhauser Signed-off-by: Gregory CLEMENT --- arch/arm/boot/dts/armada-38x.dtsi | 16 ++++++++++++---- 1 file changed, 12 insertions(+), 4 deletions(-) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/armada-38x.dtsi b/arch/arm/boot/dts/armada-38x.dtsi index 8b165c31de1e..af31f5d6c0e5 100644 --- a/arch/arm/boot/dts/armada-38x.dtsi +++ b/arch/arm/boot/dts/armada-38x.dtsi @@ -312,31 +312,39 @@ }; gpio0: gpio@18100 { - compatible = "marvell,orion-gpio"; - reg = <0x18100 0x40>; + compatible = "marvell,armada-370-gpio", + "marvell,orion-gpio"; + reg = <0x18100 0x40>, <0x181c0 0x08>; + reg-names = "gpio", "pwm"; ngpios = <32>; gpio-controller; #gpio-cells = <2>; + #pwm-cells = <2>; interrupt-controller; #interrupt-cells = <2>; interrupts = , , , ; + clocks = <&coreclk 0>; }; gpio1: gpio@18140 { - compatible = "marvell,orion-gpio"; - reg = <0x18140 0x40>; + compatible = "marvell,armada-370-gpio", + "marvell,orion-gpio"; + reg = <0x18140 0x40>, <0x181c8 0x08>; + reg-names = "gpio", "pwm"; ngpios = <28>; gpio-controller; #gpio-cells = <2>; + #pwm-cells = <2>; interrupt-controller; #interrupt-cells = <2>; interrupts = , , , ; + clocks = <&coreclk 0>; }; systemc: system-controller@18200 { -- cgit v1.2.3 From 8035eaadefc69a8add75f1fecc8e63e36bab81ea Mon Sep 17 00:00:00 2001 From: Andrew Lunn Date: Fri, 14 Apr 2017 17:40:55 +0200 Subject: ARM: dts: armada-xp: Use pwm-fan rather than gpio-fan The mvebu GPIO driver can also perform PWM on some pins. Use the pwm-fan driver to control the fan of the WRT1900AC, giving us finer grained control over its speed and hence noise. Signed-off-by: Andrew Lunn URL: https://patchwork.ozlabs.org/patch/427291/ [Ralph Sennhauser: drop flags paramter from pwms, no longer used] Signed-off-by: Ralph Sennhauser Tested-by: Andrew Lunn Acked-by: Linus Walleij Signed-off-by: Gregory CLEMENT --- arch/arm/boot/dts/armada-xp-linksys-mamba.dts | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts index 9efcf59c9b44..6d705f518254 100644 --- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts +++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts @@ -308,13 +308,11 @@ }; }; - gpio_fan { + pwm_fan { /* SUNON HA4010V4-0000-C99 */ - compatible = "gpio-fan"; - gpios = <&gpio0 24 0>; - gpio-fan,speed-map = <0 0 - 4500 1>; + compatible = "pwm-fan"; + pwms = <&gpio0 24 4000>; }; dsa { -- cgit v1.2.3 From 948e7d98e666fe8bfca5102d813053553e9866a6 Mon Sep 17 00:00:00 2001 From: Chris Packham Date: Fri, 21 Apr 2017 09:58:13 +1200 Subject: ARM: dts: mvebu: add missing interrupt to 98dx4251 switch The 98dx4251 has 4 interrupts for the packet processor whereas the 98dx3236 and 98dx3336 only have 3. Signed-off-by: Chris Packham Signed-off-by: Gregory CLEMENT --- arch/arm/boot/dts/armada-xp-98dx4251.dtsi | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/armada-xp-98dx4251.dtsi b/arch/arm/boot/dts/armada-xp-98dx4251.dtsi index 51de91b31a9d..bc9f824020eb 100644 --- a/arch/arm/boot/dts/armada-xp-98dx4251.dtsi +++ b/arch/arm/boot/dts/armada-xp-98dx4251.dtsi @@ -87,4 +87,5 @@ &pp0 { compatible = "marvell,prestera-98dx4251"; + interrupts = <33>, <34>, <35>, <36>; }; -- cgit v1.2.3 From 3bef2ac4bda818be598e6d1084750015d26edac9 Mon Sep 17 00:00:00 2001 From: Chris Packham Date: Fri, 21 Apr 2017 09:58:14 +1200 Subject: ARM: dts: mvebu: disable the rtc on 98dx3236 SoC There is no rtc for the 98dx3236 and derivative SoCs. Disable the rtc node inherited from the armada-370-xp base. Signed-off-by: Chris Packham Signed-off-by: Gregory CLEMENT --- arch/arm/boot/dts/armada-xp-98dx3236.dtsi | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/armada-xp-98dx3236.dtsi b/arch/arm/boot/dts/armada-xp-98dx3236.dtsi index 84cc232a29e9..be22ec5236ac 100644 --- a/arch/arm/boot/dts/armada-xp-98dx3236.dtsi +++ b/arch/arm/boot/dts/armada-xp-98dx3236.dtsi @@ -311,6 +311,10 @@ reg = <0x20a00 0x2d0>, <0x21070 0x58>; }; +&rtc { + status = "disabled"; +}; + &timer { compatible = "marvell,armada-xp-timer"; clocks = <&coreclk 2>, <&refclk>; -- cgit v1.2.3 From a90c9eaefbe732c33a441fdc99352a7ddf3bf355 Mon Sep 17 00:00:00 2001 From: Ralph Sennhauser Date: Sun, 21 May 2017 14:48:50 +0200 Subject: ARM: dts: armada-385-linksys: flatten dtsi Since the addition of the spi reference two styles are used. Use references instead of recreating the same structure over and over again. This helps to distinguish which are changes to the underlying nodes and which are new additions and helps maintainability in general. Verified the resulting dtb to be binary identical. Signed-off-by: Ralph Sennhauser Signed-off-by: Imre Kaloz Signed-off-by: Gregory CLEMENT --- arch/arm/boot/dts/armada-385-linksys.dtsi | 414 +++++++++++++++--------------- 1 file changed, 206 insertions(+), 208 deletions(-) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/armada-385-linksys.dtsi b/arch/arm/boot/dts/armada-385-linksys.dtsi index 2306c45685b1..481e4a36e26b 100644 --- a/arch/arm/boot/dts/armada-385-linksys.dtsi +++ b/arch/arm/boot/dts/armada-385-linksys.dtsi @@ -61,214 +61,6 @@ MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000 MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000 MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>; - - internal-regs { - i2c@11000 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins>; - status = "okay"; - - tmp421@4c { - compatible = "ti,tmp421"; - reg = <0x4c>; - }; - - pca9635@68 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "nxp,pca9635"; - reg = <0x68>; - }; - }; - - /* J10: VCC, NC, RX, NC, TX, GND */ - serial@12000 { - status = "okay"; - }; - - ethernet@70000 { - status = "okay"; - phy-mode = "rgmii-id"; - buffer-manager = <&bm>; - bm,pool-long = <2>; - bm,pool-short = <3>; - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - - ethernet@34000 { - status = "okay"; - phy-mode = "sgmii"; - buffer-manager = <&bm>; - bm,pool-long = <0>; - bm,pool-short = <1>; - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - - mdio@72004 { - status = "okay"; - - switch@0 { - compatible = "marvell,mv88e6085"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - label = "lan4"; - }; - - port@1 { - reg = <1>; - label = "lan3"; - }; - - port@2 { - reg = <2>; - label = "lan2"; - }; - - port@3 { - reg = <3>; - label = "lan1"; - }; - - port@4 { - reg = <4>; - label = "wan"; - }; - - port@5 { - reg = <5>; - label = "cpu"; - ethernet = <ð2>; - - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - }; - }; - }; - - sata@a8000 { - status = "okay"; - }; - - bm@c8000 { - status = "okay"; - }; - - /* USB part of the eSATA/USB 2.0 port */ - usb@58000 { - status = "okay"; - }; - - usb3@f8000 { - status = "okay"; - usb-phy = <&usb3_phy>; - }; - - flash@d0000 { - status = "okay"; - num-cs = <1>; - marvell,nand-keep-config; - marvell,nand-enable-arbiter; - nand-on-flash-bbt; - - partition@0 { - label = "u-boot"; - reg = <0x0000000 0x200000>; /* 2MB */ - read-only; - }; - - partition@100000 { - label = "u_env"; - reg = <0x200000 0x40000>; /* 256KB */ - }; - - partition@140000 { - label = "s_env"; - reg = <0x240000 0x40000>; /* 256KB */ - }; - - partition@900000 { - label = "devinfo"; - reg = <0x900000 0x100000>; /* 1MB */ - read-only; - }; - - /* kernel1 overlaps with rootfs1 by design */ - partition@a00000 { - label = "kernel1"; - reg = <0xa00000 0x2800000>; /* 40MB */ - }; - - partition@1000000 { - label = "rootfs1"; - reg = <0x1000000 0x2200000>; /* 34MB */ - }; - - /* kernel2 overlaps with rootfs2 by design */ - partition@3200000 { - label = "kernel2"; - reg = <0x3200000 0x2800000>; /* 40MB */ - }; - - partition@3800000 { - label = "rootfs2"; - reg = <0x3800000 0x2200000>; /* 34MB */ - }; - - /* - * 38MB, last MB is for the BBT, not writable - */ - partition@5a00000 { - label = "syscfg"; - reg = <0x5a00000 0x2600000>; - }; - - /* - * Unused area between "s_env" and "devinfo". - * Moved here because otherwise the renumbered - * partitions would break the bootloader - * supplied bootargs - */ - partition@180000 { - label = "unused_area"; - reg = <0x280000 0x680000>; /* 6.5MB */ - }; - }; - }; - - bm-bppi { - status = "okay"; - }; - - pcie-controller { - status = "okay"; - - pcie@1,0 { - /* Marvell 88W8864, 5GHz-only */ - status = "okay"; - }; - - pcie@2,0 { - /* Marvell 88W8864, 2GHz-only */ - status = "okay"; - }; - }; }; usb3_phy: usb3_phy { @@ -372,6 +164,197 @@ }; }; +&ahci0 { + status = "okay"; +}; + +&bm { + status = "okay"; +}; + +&bm_bppi { + status = "okay"; +}; + +ð0 { + status = "okay"; + phy-mode = "rgmii-id"; + buffer-manager = <&bm>; + bm,pool-long = <2>; + bm,pool-short = <3>; + fixed-link { + speed = <1000>; + full-duplex; + }; +}; + +ð2 { + status = "okay"; + phy-mode = "sgmii"; + buffer-manager = <&bm>; + bm,pool-long = <0>; + bm,pool-short = <1>; + fixed-link { + speed = <1000>; + full-duplex; + }; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; + status = "okay"; + + tmp421@4c { + compatible = "ti,tmp421"; + reg = <0x4c>; + }; + + pca9635@68 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "nxp,pca9635"; + reg = <0x68>; + }; +}; + +&nand { + status = "okay"; + num-cs = <1>; + marvell,nand-keep-config; + marvell,nand-enable-arbiter; + nand-on-flash-bbt; + + partition@0 { + label = "u-boot"; + reg = <0x0000000 0x200000>; /* 2MB */ + read-only; + }; + + partition@100000 { + label = "u_env"; + reg = <0x200000 0x40000>; /* 256KB */ + }; + + partition@140000 { + label = "s_env"; + reg = <0x240000 0x40000>; /* 256KB */ + }; + + partition@900000 { + label = "devinfo"; + reg = <0x900000 0x100000>; /* 1MB */ + read-only; + }; + + /* kernel1 overlaps with rootfs1 by design */ + partition@a00000 { + label = "kernel1"; + reg = <0xa00000 0x2800000>; /* 40MB */ + }; + + partition@1000000 { + label = "rootfs1"; + reg = <0x1000000 0x2200000>; /* 34MB */ + }; + + /* kernel2 overlaps with rootfs2 by design */ + partition@3200000 { + label = "kernel2"; + reg = <0x3200000 0x2800000>; /* 40MB */ + }; + + partition@3800000 { + label = "rootfs2"; + reg = <0x3800000 0x2200000>; /* 34MB */ + }; + + /* + * 38MB, last MB is for the BBT, not writable + */ + partition@5a00000 { + label = "syscfg"; + reg = <0x5a00000 0x2600000>; + }; + + /* + * Unused area between "s_env" and "devinfo". + * Moved here because otherwise the renumbered + * partitions would break the bootloader + * supplied bootargs + */ + partition@180000 { + label = "unused_area"; + reg = <0x280000 0x680000>; /* 6.5MB */ + }; +}; + +&mdio { + status = "okay"; + + switch@0 { + compatible = "marvell,mv88e6085"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "lan4"; + }; + + port@1 { + reg = <1>; + label = "lan3"; + }; + + port@2 { + reg = <2>; + label = "lan2"; + }; + + port@3 { + reg = <3>; + label = "lan1"; + }; + + port@4 { + reg = <4>; + label = "wan"; + }; + + port@5 { + reg = <5>; + label = "cpu"; + ethernet = <ð2>; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; + }; +}; + +&pciec { + status = "okay"; +}; + +&pcie1 { + /* Marvell 88W8864, 5GHz-only */ + status = "okay"; +}; + +&pcie2 { + /* Marvell 88W8864, 2GHz-only */ + status = "okay"; +}; + &pinctrl { keys_pin: keys-pin { marvell,pins = "mpp24", "mpp29"; @@ -397,3 +380,18 @@ &spi0 { status = "disabled"; }; + +&uart0 { + /* J10: VCC, NC, RX, NC, TX, GND */ + status = "okay"; +}; + +&usb0 { + /* USB part of the eSATA/USB 2.0 port */ + status = "okay"; +}; + +&usb3_1 { + status = "okay"; + usb-phy = <&usb3_phy>; +}; -- cgit v1.2.3 From 77c82b5f83e07591710f43abf4c85e1897f2114d Mon Sep 17 00:00:00 2001 From: Ralph Sennhauser Date: Sun, 21 May 2017 14:48:51 +0200 Subject: ARM: dts: armada-385-linksys: label nodes Add labels to nodes used by dependants. Also rename node gpio_keys to gpio-keys to match the style of the rest of the file as well as the documented example. Signed-off-by: Ralph Sennhauser Signed-off-by: Imre Kaloz Reviewed-by: Andrew Lunn Signed-off-by: Gregory CLEMENT --- arch/arm/boot/dts/armada-385-linksys.dtsi | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/armada-385-linksys.dtsi b/arch/arm/boot/dts/armada-385-linksys.dtsi index 481e4a36e26b..b7f0a16e8a2e 100644 --- a/arch/arm/boot/dts/armada-385-linksys.dtsi +++ b/arch/arm/boot/dts/armada-385-linksys.dtsi @@ -79,7 +79,7 @@ gpio = <&gpio1 18 GPIO_ACTIVE_HIGH>; }; - gpio_keys { + gpio_keys: gpio-keys { compatible = "gpio-keys"; #address-cells = <1>; #size-cells = <0>; @@ -99,7 +99,7 @@ }; }; - gpio-leds { + gpio_leds: gpio-leds { compatible = "gpio-leds"; pinctrl-0 = <&power_led_pin &sata_led_pin>; pinctrl-names = "default"; @@ -210,7 +210,7 @@ reg = <0x4c>; }; - pca9635@68 { + expander0: pca9635@68 { #address-cells = <1>; #size-cells = <0>; compatible = "nxp,pca9635"; -- cgit v1.2.3 From ecdcd24864ca42d6f4ebd7cb6e340c6333b51a79 Mon Sep 17 00:00:00 2001 From: Ralph Sennhauser Date: Sun, 21 May 2017 14:48:52 +0200 Subject: ARM: dts: armada-385-linksys: flatten dependants Flatten dts of individual boards to match the new style used in armada-385-linksys.dtsi and for the Rango addition. * Caiman - Linksys WRT1200AC v1 & v2 * Cobra - Linksys WRT1900AC v2 * Shelby - Linksys WRT1900ACS v1 & v2 Signed-off-by: Ralph Sennhauser Signed-off-by: Imre Kaloz Reviewed-by: Andrew Lunn Signed-off-by: Gregory CLEMENT --- arch/arm/boot/dts/armada-385-linksys-caiman.dts | 99 ++++++++++++------------- arch/arm/boot/dts/armada-385-linksys-cobra.dts | 99 ++++++++++++------------- arch/arm/boot/dts/armada-385-linksys-shelby.dts | 99 ++++++++++++------------- 3 files changed, 138 insertions(+), 159 deletions(-) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/armada-385-linksys-caiman.dts b/arch/arm/boot/dts/armada-385-linksys-caiman.dts index f3cee918d285..765c9394d02c 100644 --- a/arch/arm/boot/dts/armada-385-linksys-caiman.dts +++ b/arch/arm/boot/dts/armada-385-linksys-caiman.dts @@ -44,71 +44,64 @@ model = "Linksys WRT1200AC"; compatible = "linksys,caiman", "linksys,armada385", "marvell,armada385", "marvell,armada380"; +}; - soc { - internal-regs{ - i2c@11000 { - - pca9635@68 { - #address-cells = <1>; - #size-cells = <0>; +&expander0 { + #address-cells = <1>; + #size-cells = <0>; - wan_amber@0 { - label = "caiman:amber:wan"; - reg = <0x0>; - }; + wan_amber@0 { + label = "caiman:amber:wan"; + reg = <0x0>; + }; - wan_white@1 { - label = "caiman:white:wan"; - reg = <0x1>; - }; + wan_white@1 { + label = "caiman:white:wan"; + reg = <0x1>; + }; - wlan_2g@2 { - label = "caiman:white:wlan_2g"; - reg = <0x2>; - }; + wlan_2g@2 { + label = "caiman:white:wlan_2g"; + reg = <0x2>; + }; - wlan_5g@3 { - label = "caiman:white:wlan_5g"; - reg = <0x3>; - }; + wlan_5g@3 { + label = "caiman:white:wlan_5g"; + reg = <0x3>; + }; - usb2@5 { - label = "caiman:white:usb2"; - reg = <0x5>; - }; + usb2@5 { + label = "caiman:white:usb2"; + reg = <0x5>; + }; - usb3_1@6 { - label = "caiman:white:usb3_1"; - reg = <0x6>; - }; + usb3_1@6 { + label = "caiman:white:usb3_1"; + reg = <0x6>; + }; - usb3_2@7 { - label = "caiman:white:usb3_2"; - reg = <0x7>; - }; + usb3_2@7 { + label = "caiman:white:usb3_2"; + reg = <0x7>; + }; - wps_white@8 { - label = "caiman:white:wps"; - reg = <0x8>; - }; + wps_white@8 { + label = "caiman:white:wps"; + reg = <0x8>; + }; - wps_amber@9 { - label = "caiman:amber:wps"; - reg = <0x9>; - }; - }; - }; - }; + wps_amber@9 { + label = "caiman:amber:wps"; + reg = <0x9>; }; +}; - gpio-leds { - power { - label = "caiman:white:power"; - }; +&gpio_leds { + power { + label = "caiman:white:power"; + }; - sata { - label = "caiman:white:sata"; - }; + sata { + label = "caiman:white:sata"; }; }; diff --git a/arch/arm/boot/dts/armada-385-linksys-cobra.dts b/arch/arm/boot/dts/armada-385-linksys-cobra.dts index 111071860559..2ae1e7164f79 100644 --- a/arch/arm/boot/dts/armada-385-linksys-cobra.dts +++ b/arch/arm/boot/dts/armada-385-linksys-cobra.dts @@ -44,71 +44,64 @@ model = "Linksys WRT1900ACv2"; compatible = "linksys,cobra", "linksys,armada385", "marvell,armada385", "marvell,armada380"; +}; - soc { - internal-regs{ - i2c@11000 { - - pca9635@68 { - #address-cells = <1>; - #size-cells = <0>; +&expander0 { + #address-cells = <1>; + #size-cells = <0>; - wan_amber@0 { - label = "cobra:amber:wan"; - reg = <0x0>; - }; + wan_amber@0 { + label = "cobra:amber:wan"; + reg = <0x0>; + }; - wan_white@1 { - label = "cobra:white:wan"; - reg = <0x1>; - }; + wan_white@1 { + label = "cobra:white:wan"; + reg = <0x1>; + }; - wlan_2g@2 { - label = "cobra:white:wlan_2g"; - reg = <0x2>; - }; + wlan_2g@2 { + label = "cobra:white:wlan_2g"; + reg = <0x2>; + }; - wlan_5g@3 { - label = "cobra:white:wlan_5g"; - reg = <0x3>; - }; + wlan_5g@3 { + label = "cobra:white:wlan_5g"; + reg = <0x3>; + }; - usb2@5 { - label = "cobra:white:usb2"; - reg = <0x5>; - }; + usb2@5 { + label = "cobra:white:usb2"; + reg = <0x5>; + }; - usb3_1@6 { - label = "cobra:white:usb3_1"; - reg = <0x6>; - }; + usb3_1@6 { + label = "cobra:white:usb3_1"; + reg = <0x6>; + }; - usb3_2@7 { - label = "cobra:white:usb3_2"; - reg = <0x7>; - }; + usb3_2@7 { + label = "cobra:white:usb3_2"; + reg = <0x7>; + }; - wps_white@8 { - label = "cobra:white:wps"; - reg = <0x8>; - }; + wps_white@8 { + label = "cobra:white:wps"; + reg = <0x8>; + }; - wps_amber@9 { - label = "cobra:amber:wps"; - reg = <0x9>; - }; - }; - }; - }; + wps_amber@9 { + label = "cobra:amber:wps"; + reg = <0x9>; }; +}; - gpio-leds { - power { - label = "cobra:white:power"; - }; +&gpio_leds { + power { + label = "cobra:white:power"; + }; - sata { - label = "cobra:white:sata"; - }; + sata { + label = "cobra:white:sata"; }; }; diff --git a/arch/arm/boot/dts/armada-385-linksys-shelby.dts b/arch/arm/boot/dts/armada-385-linksys-shelby.dts index c7a8ddd7f9a5..74f427314626 100644 --- a/arch/arm/boot/dts/armada-385-linksys-shelby.dts +++ b/arch/arm/boot/dts/armada-385-linksys-shelby.dts @@ -44,71 +44,64 @@ model = "Linksys WRT1900ACS"; compatible = "linksys,shelby", "linksys,armada385", "marvell,armada385", "marvell,armada380"; +}; - soc { - internal-regs{ - i2c@11000 { - - pca9635@68 { - #address-cells = <1>; - #size-cells = <0>; +&expander0 { + #address-cells = <1>; + #size-cells = <0>; - wan_amber@0 { - label = "shelby:amber:wan"; - reg = <0x0>; - }; + wan_amber@0 { + label = "shelby:amber:wan"; + reg = <0x0>; + }; - wan_white@1 { - label = "shelby:white:wan"; - reg = <0x1>; - }; + wan_white@1 { + label = "shelby:white:wan"; + reg = <0x1>; + }; - wlan_2g@2 { - label = "shelby:white:wlan_2g"; - reg = <0x2>; - }; + wlan_2g@2 { + label = "shelby:white:wlan_2g"; + reg = <0x2>; + }; - wlan_5g@3 { - label = "shelby:white:wlan_5g"; - reg = <0x3>; - }; + wlan_5g@3 { + label = "shelby:white:wlan_5g"; + reg = <0x3>; + }; - usb2@5 { - label = "shelby:white:usb2"; - reg = <0x5>; - }; + usb2@5 { + label = "shelby:white:usb2"; + reg = <0x5>; + }; - usb3_1@6 { - label = "shelby:white:usb3_1"; - reg = <0x6>; - }; + usb3_1@6 { + label = "shelby:white:usb3_1"; + reg = <0x6>; + }; - usb3_2@7 { - label = "shelby:white:usb3_2"; - reg = <0x7>; - }; + usb3_2@7 { + label = "shelby:white:usb3_2"; + reg = <0x7>; + }; - wps_white@8 { - label = "shelby:white:wps"; - reg = <0x8>; - }; + wps_white@8 { + label = "shelby:white:wps"; + reg = <0x8>; + }; - wps_amber@9 { - label = "shelby:amber:wps"; - reg = <0x9>; - }; - }; - }; - }; + wps_amber@9 { + label = "shelby:amber:wps"; + reg = <0x9>; }; +}; - gpio-leds { - power { - label = "shelby:white:power"; - }; +&gpio_leds { + power { + label = "shelby:white:power"; + }; - sata { - label = "shelby:white:sata"; - }; + sata { + label = "shelby:white:sata"; }; }; -- cgit v1.2.3 From 70fd74252ed7b056fe44097e6ff76b23a530cc94 Mon Sep 17 00:00:00 2001 From: Ralph Sennhauser Date: Sun, 21 May 2017 14:48:53 +0200 Subject: ARM: dts: armada-385-linksys: drop redundant properties in dependants Drop redundant declaration of #address-cells and #size-cells. Signed-off-by: Ralph Sennhauser Signed-off-by: Imre Kaloz Reviewed-by: Andrew Lunn Signed-off-by: Gregory CLEMENT --- arch/arm/boot/dts/armada-385-linksys-caiman.dts | 3 --- arch/arm/boot/dts/armada-385-linksys-cobra.dts | 3 --- arch/arm/boot/dts/armada-385-linksys-shelby.dts | 3 --- 3 files changed, 9 deletions(-) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/armada-385-linksys-caiman.dts b/arch/arm/boot/dts/armada-385-linksys-caiman.dts index 765c9394d02c..05e854a14e0c 100644 --- a/arch/arm/boot/dts/armada-385-linksys-caiman.dts +++ b/arch/arm/boot/dts/armada-385-linksys-caiman.dts @@ -47,9 +47,6 @@ }; &expander0 { - #address-cells = <1>; - #size-cells = <0>; - wan_amber@0 { label = "caiman:amber:wan"; reg = <0x0>; diff --git a/arch/arm/boot/dts/armada-385-linksys-cobra.dts b/arch/arm/boot/dts/armada-385-linksys-cobra.dts index 2ae1e7164f79..5b1662b95a58 100644 --- a/arch/arm/boot/dts/armada-385-linksys-cobra.dts +++ b/arch/arm/boot/dts/armada-385-linksys-cobra.dts @@ -47,9 +47,6 @@ }; &expander0 { - #address-cells = <1>; - #size-cells = <0>; - wan_amber@0 { label = "cobra:amber:wan"; reg = <0x0>; diff --git a/arch/arm/boot/dts/armada-385-linksys-shelby.dts b/arch/arm/boot/dts/armada-385-linksys-shelby.dts index 74f427314626..a90937104b2b 100644 --- a/arch/arm/boot/dts/armada-385-linksys-shelby.dts +++ b/arch/arm/boot/dts/armada-385-linksys-shelby.dts @@ -47,9 +47,6 @@ }; &expander0 { - #address-cells = <1>; - #size-cells = <0>; - wan_amber@0 { label = "shelby:amber:wan"; reg = <0x0>; -- cgit v1.2.3 From a43df48fbee96179bc0a90762b761c23be67d836 Mon Sep 17 00:00:00 2001 From: Ralph Sennhauser Date: Sun, 21 May 2017 14:48:54 +0200 Subject: ARM: dts: armada-385-linksys: bm pools by label order Which pools we assing doesn't matter. Use the order which doesen't leave a chance for questions for first time readers. Signed-off-by: Ralph Sennhauser Signed-off-by: Imre Kaloz Signed-off-by: Gregory CLEMENT --- arch/arm/boot/dts/armada-385-linksys.dtsi | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/armada-385-linksys.dtsi b/arch/arm/boot/dts/armada-385-linksys.dtsi index b7f0a16e8a2e..932fca4d64c3 100644 --- a/arch/arm/boot/dts/armada-385-linksys.dtsi +++ b/arch/arm/boot/dts/armada-385-linksys.dtsi @@ -180,8 +180,8 @@ status = "okay"; phy-mode = "rgmii-id"; buffer-manager = <&bm>; - bm,pool-long = <2>; - bm,pool-short = <3>; + bm,pool-long = <0>; + bm,pool-short = <1>; fixed-link { speed = <1000>; full-duplex; @@ -192,8 +192,8 @@ status = "okay"; phy-mode = "sgmii"; buffer-manager = <&bm>; - bm,pool-long = <0>; - bm,pool-short = <1>; + bm,pool-long = <2>; + bm,pool-short = <3>; fixed-link { speed = <1000>; full-duplex; -- cgit v1.2.3 From da3ac208f88af4302ca36e0d4bf6e621aa557e71 Mon Sep 17 00:00:00 2001 From: Ralph Sennhauser Date: Sun, 21 May 2017 14:48:55 +0200 Subject: ARM: dts: armada-385-linksys: usb3 label cleanup Now that we use the reference for the USB3.0 port update the node name and labels for the phy and vbus to match the label used by armada-38x.dtsi. Signed-off-by: Ralph Sennhauser Signed-off-by: Imre Kaloz Signed-off-by: Gregory CLEMENT --- arch/arm/boot/dts/armada-385-linksys.dtsi | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/armada-385-linksys.dtsi b/arch/arm/boot/dts/armada-385-linksys.dtsi index 932fca4d64c3..6cc1ec7699ff 100644 --- a/arch/arm/boot/dts/armada-385-linksys.dtsi +++ b/arch/arm/boot/dts/armada-385-linksys.dtsi @@ -63,16 +63,16 @@ MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>; }; - usb3_phy: usb3_phy { + usb3_1_phy: usb3_1-phy { compatible = "usb-nop-xceiv"; - vcc-supply = <®_xhci0_vbus>; + vcc-supply = <&usb3_1_vbus>; }; - reg_xhci0_vbus: xhci0-vbus { + usb3_1_vbus: usb3_1-vbus { compatible = "regulator-fixed"; pinctrl-names = "default"; - pinctrl-0 = <&xhci0_vbus_pins>; - regulator-name = "xhci0-vbus"; + pinctrl-0 = <&usb3_1_vbus_pins>; + regulator-name = "usb3_1-vbus"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; enable-active-high; @@ -371,7 +371,7 @@ marvell,function = "gpio"; }; - xhci0_vbus_pins: xhci0-vbus-pins { + usb3_1_vbus_pins: usb3_1-vbus-pins { marvell,pins = "mpp50"; marvell,function = "gpio"; }; @@ -393,5 +393,5 @@ &usb3_1 { status = "okay"; - usb-phy = <&usb3_phy>; + usb-phy = <&usb3_1_phy>; }; -- cgit v1.2.3 From 4c38d10c75bc196c703643f72669d9be0d11e4e5 Mon Sep 17 00:00:00 2001 From: Ralph Sennhauser Date: Sun, 21 May 2017 14:48:56 +0200 Subject: ARM: dts: armada-385-linksys: drop legacy DSA bindings The new ones work so there is little reason to keep the legacy bindings. Use the rework as the opportunity to drop the legacy node. Signed-off-by: Ralph Sennhauser Signed-off-by: Imre Kaloz Reviewed-by: Andrew Lunn Signed-off-by: Gregory CLEMENT --- arch/arm/boot/dts/armada-385-linksys.dtsi | 47 ------------------------------- 1 file changed, 47 deletions(-) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/armada-385-linksys.dtsi b/arch/arm/boot/dts/armada-385-linksys.dtsi index 6cc1ec7699ff..f1d6b77c73fe 100644 --- a/arch/arm/boot/dts/armada-385-linksys.dtsi +++ b/arch/arm/boot/dts/armada-385-linksys.dtsi @@ -115,53 +115,6 @@ linux,default-trigger = "disk-activity"; }; }; - - dsa@0 { - status = "disabled"; - - compatible = "marvell,dsa"; - #address-cells = <2>; - #size-cells = <0>; - - dsa,ethernet = <ð2>; - dsa,mii-bus = <&mdio>; - - switch@0 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0x0 0>; /* MDIO address 0, switch 0 in tree */ - - port@0 { - reg = <0>; - label = "lan4"; - }; - - port@1 { - reg = <1>; - label = "lan3"; - }; - - port@2 { - reg = <2>; - label = "lan2"; - }; - - port@3 { - reg = <3>; - label = "lan1"; - }; - - port@4 { - reg = <4>; - label = "wan"; - }; - - port@5 { - reg = <5>; - label = "cpu"; - }; - }; - }; }; &ahci0 { -- cgit v1.2.3 From 0ebbb9575ac6bafa1219a4ae81639712bb3054cb Mon Sep 17 00:00:00 2001 From: Ralph Sennhauser Date: Sun, 21 May 2017 14:48:57 +0200 Subject: ARM: dts: armada-385-linksys: use binary unit prefixes Use IEEE 1541-2002 unit prefixes for sizes. Signed-off-by: Ralph Sennhauser Signed-off-by: Imre Kaloz Signed-off-by: Gregory CLEMENT --- arch/arm/boot/dts/armada-385-linksys.dtsi | 22 +++++++++++----------- 1 file changed, 11 insertions(+), 11 deletions(-) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/armada-385-linksys.dtsi b/arch/arm/boot/dts/armada-385-linksys.dtsi index f1d6b77c73fe..4049eaf80638 100644 --- a/arch/arm/boot/dts/armada-385-linksys.dtsi +++ b/arch/arm/boot/dts/armada-385-linksys.dtsi @@ -52,7 +52,7 @@ memory { device_type = "memory"; - reg = <0x00000000 0x20000000>; /* 512 MB */ + reg = <0x00000000 0x20000000>; /* 512 MiB */ }; soc { @@ -180,50 +180,50 @@ partition@0 { label = "u-boot"; - reg = <0x0000000 0x200000>; /* 2MB */ + reg = <0x0000000 0x200000>; /* 2MiB */ read-only; }; partition@100000 { label = "u_env"; - reg = <0x200000 0x40000>; /* 256KB */ + reg = <0x200000 0x40000>; /* 256KiB */ }; partition@140000 { label = "s_env"; - reg = <0x240000 0x40000>; /* 256KB */ + reg = <0x240000 0x40000>; /* 256KiB */ }; partition@900000 { label = "devinfo"; - reg = <0x900000 0x100000>; /* 1MB */ + reg = <0x900000 0x100000>; /* 1MiB */ read-only; }; /* kernel1 overlaps with rootfs1 by design */ partition@a00000 { label = "kernel1"; - reg = <0xa00000 0x2800000>; /* 40MB */ + reg = <0xa00000 0x2800000>; /* 40MiB */ }; partition@1000000 { label = "rootfs1"; - reg = <0x1000000 0x2200000>; /* 34MB */ + reg = <0x1000000 0x2200000>; /* 34MiB */ }; /* kernel2 overlaps with rootfs2 by design */ partition@3200000 { label = "kernel2"; - reg = <0x3200000 0x2800000>; /* 40MB */ + reg = <0x3200000 0x2800000>; /* 40MiB */ }; partition@3800000 { label = "rootfs2"; - reg = <0x3800000 0x2200000>; /* 34MB */ + reg = <0x3800000 0x2200000>; /* 34MiB */ }; /* - * 38MB, last MB is for the BBT, not writable + * 38MiB, last MiB is for the BBT, not writable */ partition@5a00000 { label = "syscfg"; @@ -238,7 +238,7 @@ */ partition@180000 { label = "unused_area"; - reg = <0x280000 0x680000>; /* 6.5MB */ + reg = <0x280000 0x680000>; /* 6.5MiB */ }; }; -- cgit v1.2.3 From bf6c959eb43ebe8d8ea4fac6d622a70f3ddc8e63 Mon Sep 17 00:00:00 2001 From: Ralph Sennhauser Date: Sun, 21 May 2017 14:48:58 +0200 Subject: ARM: dts: armada-385-linksys: partition layout is board specific Move the partition layout to individual boards. The Linksys WRT 3200 ACM (Rango) comes with a 256MiB nand flash chip and different layout. Signed-off-by: Ralph Sennhauser Signed-off-by: Imre Kaloz Reviewed-by: Andrew Lunn Signed-off-by: Gregory CLEMENT --- arch/arm/boot/dts/armada-385-linksys-caiman.dts | 67 +++++++++++++++++++++++++ arch/arm/boot/dts/armada-385-linksys-cobra.dts | 67 +++++++++++++++++++++++++ arch/arm/boot/dts/armada-385-linksys-shelby.dts | 67 +++++++++++++++++++++++++ arch/arm/boot/dts/armada-385-linksys.dtsi | 64 +---------------------- 4 files changed, 202 insertions(+), 63 deletions(-) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/armada-385-linksys-caiman.dts b/arch/arm/boot/dts/armada-385-linksys-caiman.dts index 05e854a14e0c..ee669ae61011 100644 --- a/arch/arm/boot/dts/armada-385-linksys-caiman.dts +++ b/arch/arm/boot/dts/armada-385-linksys-caiman.dts @@ -102,3 +102,70 @@ label = "caiman:white:sata"; }; }; + +&nand { + /* 128MiB */ + + partition@0 { + label = "u-boot"; + reg = <0x0000000 0x200000>; /* 2MiB */ + read-only; + }; + + partition@100000 { + label = "u_env"; + reg = <0x200000 0x40000>; /* 256KiB */ + }; + + partition@140000 { + label = "s_env"; + reg = <0x240000 0x40000>; /* 256KiB */ + }; + + partition@900000 { + label = "devinfo"; + reg = <0x900000 0x100000>; /* 1MiB */ + read-only; + }; + + /* kernel1 overlaps with rootfs1 by design */ + partition@a00000 { + label = "kernel1"; + reg = <0xa00000 0x2800000>; /* 40MiB */ + }; + + partition@1000000 { + label = "rootfs1"; + reg = <0x1000000 0x2200000>; /* 34MiB */ + }; + + /* kernel2 overlaps with rootfs2 by design */ + partition@3200000 { + label = "kernel2"; + reg = <0x3200000 0x2800000>; /* 40MiB */ + }; + + partition@3800000 { + label = "rootfs2"; + reg = <0x3800000 0x2200000>; /* 34MiB */ + }; + + /* + * 38MiB, last MiB is for the BBT, not writable + */ + partition@5a00000 { + label = "syscfg"; + reg = <0x5a00000 0x2600000>; + }; + + /* + * Unused area between "s_env" and "devinfo". + * Moved here because otherwise the renumbered + * partitions would break the bootloader + * supplied bootargs + */ + partition@180000 { + label = "unused_area"; + reg = <0x280000 0x680000>; /* 6.5MiB */ + }; +}; diff --git a/arch/arm/boot/dts/armada-385-linksys-cobra.dts b/arch/arm/boot/dts/armada-385-linksys-cobra.dts index 5b1662b95a58..5169ca89c55a 100644 --- a/arch/arm/boot/dts/armada-385-linksys-cobra.dts +++ b/arch/arm/boot/dts/armada-385-linksys-cobra.dts @@ -102,3 +102,70 @@ label = "cobra:white:sata"; }; }; + +&nand { + /* 128MiB */ + + partition@0 { + label = "u-boot"; + reg = <0x0000000 0x200000>; /* 2MiB */ + read-only; + }; + + partition@100000 { + label = "u_env"; + reg = <0x200000 0x40000>; /* 256KiB */ + }; + + partition@140000 { + label = "s_env"; + reg = <0x240000 0x40000>; /* 256KiB */ + }; + + partition@900000 { + label = "devinfo"; + reg = <0x900000 0x100000>; /* 1MiB */ + read-only; + }; + + /* kernel1 overlaps with rootfs1 by design */ + partition@a00000 { + label = "kernel1"; + reg = <0xa00000 0x2800000>; /* 40MiB */ + }; + + partition@1000000 { + label = "rootfs1"; + reg = <0x1000000 0x2200000>; /* 34MiB */ + }; + + /* kernel2 overlaps with rootfs2 by design */ + partition@3200000 { + label = "kernel2"; + reg = <0x3200000 0x2800000>; /* 40MiB */ + }; + + partition@3800000 { + label = "rootfs2"; + reg = <0x3800000 0x2200000>; /* 34MiB */ + }; + + /* + * 38MiB, last MiB is for the BBT, not writable + */ + partition@5a00000 { + label = "syscfg"; + reg = <0x5a00000 0x2600000>; + }; + + /* + * Unused area between "s_env" and "devinfo". + * Moved here because otherwise the renumbered + * partitions would break the bootloader + * supplied bootargs + */ + partition@180000 { + label = "unused_area"; + reg = <0x280000 0x680000>; /* 6.5MiB */ + }; +}; diff --git a/arch/arm/boot/dts/armada-385-linksys-shelby.dts b/arch/arm/boot/dts/armada-385-linksys-shelby.dts index a90937104b2b..94aa35bc0bff 100644 --- a/arch/arm/boot/dts/armada-385-linksys-shelby.dts +++ b/arch/arm/boot/dts/armada-385-linksys-shelby.dts @@ -102,3 +102,70 @@ label = "shelby:white:sata"; }; }; + +&nand { + /* 128MiB */ + + partition@0 { + label = "u-boot"; + reg = <0x0000000 0x200000>; /* 2MiB */ + read-only; + }; + + partition@100000 { + label = "u_env"; + reg = <0x200000 0x40000>; /* 256KiB */ + }; + + partition@140000 { + label = "s_env"; + reg = <0x240000 0x40000>; /* 256KiB */ + }; + + partition@900000 { + label = "devinfo"; + reg = <0x900000 0x100000>; /* 1MiB */ + read-only; + }; + + /* kernel1 overlaps with rootfs1 by design */ + partition@a00000 { + label = "kernel1"; + reg = <0xa00000 0x2800000>; /* 40MiB */ + }; + + partition@1000000 { + label = "rootfs1"; + reg = <0x1000000 0x2200000>; /* 34MiB */ + }; + + /* kernel2 overlaps with rootfs2 by design */ + partition@3200000 { + label = "kernel2"; + reg = <0x3200000 0x2800000>; /* 40MiB */ + }; + + partition@3800000 { + label = "rootfs2"; + reg = <0x3800000 0x2200000>; /* 34MiB */ + }; + + /* + * 38MiB, last MiB is for the BBT, not writable + */ + partition@5a00000 { + label = "syscfg"; + reg = <0x5a00000 0x2600000>; + }; + + /* + * Unused area between "s_env" and "devinfo". + * Moved here because otherwise the renumbered + * partitions would break the bootloader + * supplied bootargs + */ + partition@180000 { + label = "unused_area"; + reg = <0x280000 0x680000>; /* 6.5MiB */ + }; +}; diff --git a/arch/arm/boot/dts/armada-385-linksys.dtsi b/arch/arm/boot/dts/armada-385-linksys.dtsi index 4049eaf80638..485abffb4368 100644 --- a/arch/arm/boot/dts/armada-385-linksys.dtsi +++ b/arch/arm/boot/dts/armada-385-linksys.dtsi @@ -172,74 +172,12 @@ }; &nand { + /* 128MiB or 256MiB */ status = "okay"; num-cs = <1>; marvell,nand-keep-config; marvell,nand-enable-arbiter; nand-on-flash-bbt; - - partition@0 { - label = "u-boot"; - reg = <0x0000000 0x200000>; /* 2MiB */ - read-only; - }; - - partition@100000 { - label = "u_env"; - reg = <0x200000 0x40000>; /* 256KiB */ - }; - - partition@140000 { - label = "s_env"; - reg = <0x240000 0x40000>; /* 256KiB */ - }; - - partition@900000 { - label = "devinfo"; - reg = <0x900000 0x100000>; /* 1MiB */ - read-only; - }; - - /* kernel1 overlaps with rootfs1 by design */ - partition@a00000 { - label = "kernel1"; - reg = <0xa00000 0x2800000>; /* 40MiB */ - }; - - partition@1000000 { - label = "rootfs1"; - reg = <0x1000000 0x2200000>; /* 34MiB */ - }; - - /* kernel2 overlaps with rootfs2 by design */ - partition@3200000 { - label = "kernel2"; - reg = <0x3200000 0x2800000>; /* 40MiB */ - }; - - partition@3800000 { - label = "rootfs2"; - reg = <0x3800000 0x2200000>; /* 34MiB */ - }; - - /* - * 38MiB, last MiB is for the BBT, not writable - */ - partition@5a00000 { - label = "syscfg"; - reg = <0x5a00000 0x2600000>; - }; - - /* - * Unused area between "s_env" and "devinfo". - * Moved here because otherwise the renumbered - * partitions would break the bootloader - * supplied bootargs - */ - partition@180000 { - label = "unused_area"; - reg = <0x280000 0x680000>; /* 6.5MiB */ - }; }; &mdio { -- cgit v1.2.3 From 1216132f4dd57a4a6b8557ce2dbc64758b433991 Mon Sep 17 00:00:00 2001 From: Ralph Sennhauser Date: Sun, 21 May 2017 14:48:59 +0200 Subject: ARM: dts: armada-385-linksys: group pins in pinctrl A pin group per node is sufficient, further specialization only serves as documentation which can be a comment just as well. This simplifies configuring pins for nodes in dependants. Also use labels which end up right by the node they are intended for. Signed-off-by: Ralph Sennhauser Signed-off-by: Imre Kaloz Reviewed-by: Andrew Lunn Signed-off-by: Gregory CLEMENT --- arch/arm/boot/dts/armada-385-linksys.dtsi | 17 +++++++---------- 1 file changed, 7 insertions(+), 10 deletions(-) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/armada-385-linksys.dtsi b/arch/arm/boot/dts/armada-385-linksys.dtsi index 485abffb4368..1bb974a7c30b 100644 --- a/arch/arm/boot/dts/armada-385-linksys.dtsi +++ b/arch/arm/boot/dts/armada-385-linksys.dtsi @@ -83,7 +83,7 @@ compatible = "gpio-keys"; #address-cells = <1>; #size-cells = <0>; - pinctrl-0 = <&keys_pin>; + pinctrl-0 = <&gpio_keys_pins>; pinctrl-names = "default"; button@1 { @@ -101,7 +101,7 @@ gpio_leds: gpio-leds { compatible = "gpio-leds"; - pinctrl-0 = <&power_led_pin &sata_led_pin>; + pinctrl-0 = <&gpio_leds_pins>; pinctrl-names = "default"; power { @@ -247,18 +247,15 @@ }; &pinctrl { - keys_pin: keys-pin { + gpio_keys_pins: gpio-keys-pins { + /* mpp24: wps, mpp29: reset */ marvell,pins = "mpp24", "mpp29"; marvell,function = "gpio"; }; - power_led_pin: power-led-pin { - marvell,pins = "mpp55"; - marvell,function = "gpio"; - }; - - sata_led_pin: sata-led-pin { - marvell,pins = "mpp54"; + gpio_leds_pins: gpio-leds-pins { + /* mpp54: sata, mpp55: power */ + marvell,pins = "mpp54", "mpp55"; marvell,function = "gpio"; }; -- cgit v1.2.3 From b2758f8edbf87f964825de1119887d9deb56dbaa Mon Sep 17 00:00:00 2001 From: Ralph Sennhauser Date: Sun, 21 May 2017 14:49:00 +0200 Subject: ARM: dts: armada-385-linksys: fixup button node names Buttons don't have a reg property; drop pseudo address and fixup names of individual button nodes. Also drop #address-cells and #size-cells properties. Signed-off-by: Ralph Sennhauser Signed-off-by: Imre Kaloz Reviewed-by: Andrew Lunn Signed-off-by: Gregory CLEMENT --- arch/arm/boot/dts/armada-385-linksys.dtsi | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/armada-385-linksys.dtsi b/arch/arm/boot/dts/armada-385-linksys.dtsi index 1bb974a7c30b..e1f355ffc8f7 100644 --- a/arch/arm/boot/dts/armada-385-linksys.dtsi +++ b/arch/arm/boot/dts/armada-385-linksys.dtsi @@ -81,18 +81,16 @@ gpio_keys: gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; pinctrl-0 = <&gpio_keys_pins>; pinctrl-names = "default"; - button@1 { + wps { label = "WPS"; linux,code = ; gpios = <&gpio0 24 GPIO_ACTIVE_LOW>; }; - button@2 { + reset { label = "Factory Reset Button"; linux,code = ; gpios = <&gpio0 29 GPIO_ACTIVE_LOW>; -- cgit v1.2.3 From 41c8652096268988207d4fa13ee9236c9980d34d Mon Sep 17 00:00:00 2001 From: Ralph Sennhauser Date: Wed, 24 May 2017 08:16:46 +0200 Subject: ARM: dts: mvebu: add support for Linksys WRT3200ACM (Rango) The Linksys WRT3200ACM (Rango) is the lates Armada-385 based router in the Linksys WRT AC Series which got released in October 2016. Key differences to the earlier Armada-385 based devices in the series is a bigger flash chip, next generation wireless modules (Marvell 88W8964) in the mini pcie slots as well as a Marvell SD8887. Finally the CPU is clocked at 1866 GHz by default. The file armada-385-linksys-rango.dts is loosly based off of a DTS authored by Imre Kaloz. As Rango is part of the armada-385-linksys family of boards use the armada-385-linksys.dtsi as basis. As for functional differences to Imre Kaloz dts, the wlan LEDs aren't connected to the expander chip pca9635 but directly to GPIOs. Then mpp47 controls the USB2.0 port and not the USB3.0 port, so use the correct GPIO mpp44 for it. Finally use non-removable instead of broken-cd with the sdhci node to avoid polling. Other changes can be categorized as just cleanup / reorganization due to using the armada-385-linksys.dtsi. URL: https://github.com/openwrt/openwrt/blob/0abc3fa5a996daf7dafdc7794ccfe3fa7e955c5a/target/linux/mvebu/files/arch/arm/boot/dts/armada-385-linksys-rango.dts Signed-off-by: Ralph Sennhauser Signed-off-by: Imre Kaloz Reviewed-by: Andrew Lunn Signed-off-by: Gregory CLEMENT --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/armada-385-linksys-rango.dts | 203 +++++++++++++++++++++++++ 2 files changed, 204 insertions(+) create mode 100644 arch/arm/boot/dts/armada-385-linksys-rango.dts (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 9c5e1d944d1c..6be297427c11 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -999,6 +999,7 @@ dtb-$(CONFIG_MACH_ARMADA_38X) += \ armada-385-db-ap.dtb \ armada-385-linksys-caiman.dtb \ armada-385-linksys-cobra.dtb \ + armada-385-linksys-rango.dtb \ armada-385-linksys-shelby.dtb \ armada-385-synology-ds116.dtb \ armada-385-turris-omnia.dtb \ diff --git a/arch/arm/boot/dts/armada-385-linksys-rango.dts b/arch/arm/boot/dts/armada-385-linksys-rango.dts new file mode 100644 index 000000000000..da8a0f3d432b --- /dev/null +++ b/arch/arm/boot/dts/armada-385-linksys-rango.dts @@ -0,0 +1,203 @@ +/* + * Device Tree file for the Linksys WRT3200ACM (Rango) + * + * Copyright (C) 2016 Imre Kaloz + * + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without + * any warranty of any kind, whether express or implied. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include +#include +#include "armada-385-linksys.dtsi" + +/ { + model = "Linksys WRT3200ACM"; + compatible = "linksys,rango", "linksys,armada385", "marvell,armada385", + "marvell,armada380"; +}; + +&expander0 { + wan_amber@0 { + label = "rango:amber:wan"; + reg = <0x0>; + }; + + wan_white@1 { + label = "rango:white:wan"; + reg = <0x1>; + }; + + usb2@5 { + label = "rango:white:usb2"; + reg = <0x5>; + }; + + usb3_1@6 { + label = "rango:white:usb3_1"; + reg = <0x6>; + }; + + usb3_2@7 { + label = "rango:white:usb3_2"; + reg = <0x7>; + }; + + wps_white@8 { + label = "rango:white:wps"; + reg = <0x8>; + }; + + wps_amber@9 { + label = "rango:amber:wps"; + reg = <0x9>; + }; +}; + +&gpio_leds { + power { + gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>; + label = "rango:white:power"; + }; + + sata { + gpios = <&gpio0 21 GPIO_ACTIVE_LOW>; + label = "rango:white:sata"; + }; + + wlan_2g { + gpios = <&gpio1 13 GPIO_ACTIVE_LOW>; + label = "rango:white:wlan_2g"; + }; + + wlan_5g { + gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; + label = "rango:white:wlan_5g"; + }; +}; + +&gpio_leds_pins { + marvell,pins = "mpp21", "mpp45", "mpp46", "mpp56"; +}; + +&nand { + /* AMD/Spansion S34ML02G2 256MiB, OEM Layout */ + + partition@0 { + label = "u-boot"; + reg = <0x0000000 0x200000>; /* 2MiB */ + read-only; + }; + + partition@200000 { + label = "u_env"; + reg = <0x200000 0x20000>; /* 128KiB */ + }; + + partition@220000 { + label = "s_env"; + reg = <0x220000 0x40000>; /* 256KiB */ + }; + + partition@7e0000 { + label = "devinfo"; + reg = <0x7e0000 0x40000>; /* 256KiB */ + read-only; + }; + + partition@820000 { + label = "sysdiag"; + reg = <0x820000 0x1e0000>; /* 1920KiB */ + read-only; + }; + + /* kernel1 overlaps with rootfs1 by design */ + partition@a00000 { + label = "kernel1"; + reg = <0xa00000 0x5000000>; /* 80MiB */ + }; + + partition@1000000 { + label = "rootfs1"; + reg = <0x1000000 0x4a00000>; /* 74MiB */ + }; + + /* kernel2 overlaps with rootfs2 by design */ + partition@5a00000 { + label = "kernel2"; + reg = <0x5a00000 0x5000000>; /* 80MiB */ + }; + + partition@6000000 { + label = "rootfs2"; + reg = <0x6000000 0x4a00000>; /* 74MiB */ + }; + + /* + * 86MiB, last MiB is for the BBT, not writable + */ + partition@aa00000 { + label = "syscfg"; + reg = <0xaa00000 0x5600000>; + }; + + /* + * Unused area between "s_env" and "devinfo". + * Moved here because otherwise the renumbered + * partitions would break the bootloader + * supplied bootargs + */ + partition@180000 { + label = "unused_area"; + reg = <0x260000 0x5c0000>; /* 5.75MiB */ + }; +}; + +&sdhci { + pinctrl-names = "default"; + pinctrl-0 = <&sdhci_pins>; + no-1-8-v; + non-removable; + wp-inverted; + bus-width = <8>; + status = "okay"; +}; + +&usb3_1_vbus { + gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>; +}; + +&usb3_1_vbus_pins { + marvell,pins = "mpp44"; +}; -- cgit v1.2.3 From 97800cf8b6a81cf17ad216ec9d0c8e78c68b7aef Mon Sep 17 00:00:00 2001 From: Javier Martinez Canillas Date: Tue, 23 May 2017 15:34:32 +0200 Subject: ARM: dts: turris-omnia: Add generic compatible string for I2C EEPROM The at24 driver allows to register I2C EEPROM chips using different vendor and devices, but the I2C subsystem does not take the vendor into account when matching using the I2C table since it only has device entries. But when matching using an OF table, both the vendor and device has to be taken into account so the driver defines only a set of compatible strings using the "atmel" vendor as a generic fallback for compatible I2C devices. So add this generic fallback to the device node compatible string to make the device to match the driver using the OF device ID table. Signed-off-by: Javier Martinez Canillas Signed-off-by: Gregory CLEMENT --- arch/arm/boot/dts/armada-385-turris-omnia.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/armada-385-turris-omnia.dts b/arch/arm/boot/dts/armada-385-turris-omnia.dts index 28eede180e4f..be16ce39fb3d 100644 --- a/arch/arm/boot/dts/armada-385-turris-omnia.dts +++ b/arch/arm/boot/dts/armada-385-turris-omnia.dts @@ -171,7 +171,7 @@ /* leds device (in STM32F0) at address 0x2b */ eeprom@54 { - compatible = "at,24c64"; + compatible = "atmel,24c64"; reg = <0x54>; /* The EEPROM contains data for bootloader. -- cgit v1.2.3 From d8710c3fb912574709166bba24f4c64162ab832c Mon Sep 17 00:00:00 2001 From: Christopher Spinrath Date: Tue, 30 May 2017 22:16:01 +0200 Subject: ARM: dts: imx6q-cm-fx6: add sdio wifi/bt nodes The cm-fx6 module has an on-board AW-NH387 WiFi/BT module which is based on Marvell's SD8787 chip and is connected to the usdhc1 controller. Unfortunately, the chip gets unresponsive if the Bluetooth AMP (Alternate Mac/Phy) function gets probed but the loaded firmware doesn't support it. For instance, this is the case for the most recent firmware in linux-firmware (Version 14.66.35.p52). Thus, just add the required nodes but leave the usdhc1 node disabled explicitly. Users who disabled the Bluetooth (AMP) support of their OS can then conveniently enable WiFi (or even plain Bluetooth) support with a simple device tree overlay/bootloader configuration. Signed-off-by: Christopher Spinrath Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6q-cm-fx6.dts | 41 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 41 insertions(+) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/imx6q-cm-fx6.dts b/arch/arm/boot/dts/imx6q-cm-fx6.dts index a8af3822d9df..fe6ab0aa34f9 100644 --- a/arch/arm/boot/dts/imx6q-cm-fx6.dts +++ b/arch/arm/boot/dts/imx6q-cm-fx6.dts @@ -64,6 +64,14 @@ }; }; + awnh387_pwrseq: pwrseq { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwrseq>; + compatible = "mmc-pwrseq-sd8787"; + powerdown-gpios = <&gpio7 12 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio6 16 GPIO_ACTIVE_HIGH>; + }; + reg_pcie_power_on_gpio: regulator-pcie-power-on-gpio { compatible = "regulator-fixed"; regulator-name = "regulator-pcie-power-on-gpio"; @@ -304,6 +312,13 @@ >; }; + pinctrl_pwrseq: pwrseqgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x1b0b0 + MX6QDL_PAD_NANDF_CS3__GPIO6_IO16 0x1b0b0 + >; + }; + pinctrl_spdif: spdifgrp { fsl,pins = < MX6QDL_PAD_GPIO_16__SPDIF_IN 0x1b0b0 @@ -330,6 +345,17 @@ MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x130b0 >; }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX6QDL_PAD_SD1_CMD__SD1_CMD 0x17071 + MX6QDL_PAD_SD1_CLK__SD1_CLK 0x10071 + MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17071 + MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17071 + MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17071 + MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17071 + >; + }; }; &pcie { @@ -382,3 +408,18 @@ dr_mode = "otg"; status = "okay"; }; + +&usdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc1>; + mmc-pwrseq = <&awnh387_pwrseq>; + non-removable; + /* + * If the OS probes the Bluetooth AMP function advertised on this bus + * but the firmware in place does not support it, the WiFi/BT module + * gets unresponsive. + * Users who configured their OS properly can enable this node to gain + * WiFi and/or plain Bluetooth support. + */ + status = "disabled"; +}; -- cgit v1.2.3 From fdfe7f4f9d856f98119132319512eba51cbee593 Mon Sep 17 00:00:00 2001 From: Andreas Färber Date: Wed, 15 Feb 2017 11:15:20 +0100 Subject: ARM: dts: Add Actions Semi S500 and LeMaker Guitar MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Add Device Trees for Actions Semiconductor S500 SoC and LeMaker Guitar SoM and base board. Signed-off-by: Andreas Färber --- arch/arm/boot/dts/Makefile | 2 + arch/arm/boot/dts/owl-s500-guitar-bb-rev-b.dts | 26 ++++ arch/arm/boot/dts/owl-s500-guitar.dtsi | 22 ++++ arch/arm/boot/dts/owl-s500.dtsi | 176 +++++++++++++++++++++++++ 4 files changed, 226 insertions(+) create mode 100644 arch/arm/boot/dts/owl-s500-guitar-bb-rev-b.dts create mode 100644 arch/arm/boot/dts/owl-s500-guitar.dtsi create mode 100644 arch/arm/boot/dts/owl-s500.dtsi (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 9c5e1d944d1c..9c19c3dd7a5a 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -663,6 +663,8 @@ dtb-$(CONFIG_ARCH_ORION5X) += \ orion5x-maxtor-shared-storage-2.dtb \ orion5x-netgear-wnr854t.dtb \ orion5x-rd88f5182-nas.dtb +dtb-$(CONFIG_ARCH_ACTIONS) += \ + owl-s500-guitar-bb-rev-b.dtb dtb-$(CONFIG_ARCH_PRIMA2) += \ prima2-evb.dtb dtb-$(CONFIG_ARCH_OXNAS) += \ diff --git a/arch/arm/boot/dts/owl-s500-guitar-bb-rev-b.dts b/arch/arm/boot/dts/owl-s500-guitar-bb-rev-b.dts new file mode 100644 index 000000000000..521463d4cac6 --- /dev/null +++ b/arch/arm/boot/dts/owl-s500-guitar-bb-rev-b.dts @@ -0,0 +1,26 @@ +/* + * Copyright (c) 2016-2017 Andreas Färber + * + * SPDX-License-Identifier: (GPL-2.0+ OR MIT) + */ + +/dts-v1/; + +#include "owl-s500-guitar.dtsi" + +/ { + compatible = "lemaker,guitar-bb-rev-b", "lemaker,guitar", "actions,s500"; + model = "LeMaker Guitar Base Board rev. B"; + + aliases { + serial3 = &uart3; + }; + + chosen { + stdout-path = "serial3:115200n8"; + }; +}; + +&uart3 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/owl-s500-guitar.dtsi b/arch/arm/boot/dts/owl-s500-guitar.dtsi new file mode 100644 index 000000000000..079b2c02cc13 --- /dev/null +++ b/arch/arm/boot/dts/owl-s500-guitar.dtsi @@ -0,0 +1,22 @@ +/* + * LeMaker Guitar SoM + * + * Copyright (c) 2016-2017 Andreas Färber + * + * SPDX-License-Identifier: (GPL-2.0+ OR MIT) + */ + +#include "owl-s500.dtsi" + +/ { + compatible = "lemaker,guitar", "actions,s500"; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x40000000>; + }; +}; + +&timer { + clocks = <&hosc>; +}; diff --git a/arch/arm/boot/dts/owl-s500.dtsi b/arch/arm/boot/dts/owl-s500.dtsi new file mode 100644 index 000000000000..fc9f71a4106a --- /dev/null +++ b/arch/arm/boot/dts/owl-s500.dtsi @@ -0,0 +1,176 @@ +/* + * Actions Semi S500 SoC + * + * Copyright (c) 2016-2017 Andreas Färber + * + * SPDX-License-Identifier: (GPL-2.0+ OR MIT) + */ + +#include + +/ { + compatible = "actions,s500"; + interrupt-parent = <&gic>; + #address-cells = <1>; + #size-cells = <1>; + + aliases { + }; + + chosen { + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <0x0>; + }; + + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <0x1>; + }; + + cpu2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <0x2>; + }; + + cpu3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <0x3>; + }; + }; + + arm-pmu { + compatible = "arm,cortex-a9-pmu"; + interrupts = , + , + , + ; + interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>; + }; + + hosc: hosc { + compatible = "fixed-clock"; + clock-frequency = <24000000>; + #clock-cells = <0>; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + scu: scu@b0020000 { + compatible = "arm,cortex-a9-scu"; + reg = <0xb0020000 0x100>; + }; + + global_timer: timer@b0020200 { + compatible = "arm,cortex-a9-global-timer"; + reg = <0xb0020200 0x100>; + interrupts = ; + status = "disabled"; + }; + + twd_timer: timer@b0020600 { + compatible = "arm,cortex-a9-twd-timer"; + reg = <0xb0020600 0x20>; + interrupts = ; + status = "disabled"; + }; + + twd_wdt: wdt@b0020620 { + compatible = "arm,cortex-a9-twd-wdt"; + reg = <0xb0020620 0xe0>; + interrupts = ; + status = "disabled"; + }; + + gic: interrupt-controller@b0021000 { + compatible = "arm,cortex-a9-gic"; + reg = <0xb0021000 0x1000>, + <0xb0020100 0x0100>; + interrupt-controller; + #interrupt-cells = <3>; + }; + + l2: cache-controller@b0022000 { + compatible = "arm,pl310-cache"; + reg = <0xb0022000 0x1000>; + cache-unified; + cache-level = <2>; + interrupts = ; + arm,tag-latency = <3 3 2>; + arm,data-latency = <5 3 3>; + }; + + uart0: serial@b0120000 { + compatible = "actions,s500-uart", "actions,owl-uart"; + reg = <0xb0120000 0x2000>; + interrupts = ; + status = "disabled"; + }; + + uart1: serial@b0122000 { + compatible = "actions,s500-uart", "actions,owl-uart"; + reg = <0xb0122000 0x2000>; + interrupts = ; + status = "disabled"; + }; + + uart2: serial@b0124000 { + compatible = "actions,s500-uart", "actions,owl-uart"; + reg = <0xb0124000 0x2000>; + interrupts = ; + status = "disabled"; + }; + + uart3: serial@b0126000 { + compatible = "actions,s500-uart", "actions,owl-uart"; + reg = <0xb0126000 0x2000>; + interrupts = ; + status = "disabled"; + }; + + uart4: serial@b0128000 { + compatible = "actions,s500-uart", "actions,owl-uart"; + reg = <0xb0128000 0x2000>; + interrupts = ; + status = "disabled"; + }; + + uart5: serial@b012a000 { + compatible = "actions,s500-uart", "actions,owl-uart"; + reg = <0xb012a000 0x2000>; + interrupts = ; + status = "disabled"; + }; + + uart6: serial@b012c000 { + compatible = "actions,s500-uart", "actions,owl-uart"; + reg = <0xb012c000 0x2000>; + interrupts = ; + status = "disabled"; + }; + + timer: timer@b0168000 { + compatible = "actions,s500-timer"; + reg = <0xb0168000 0x8000>; + interrupts = , + , + , + ; + interrupt-names = "2hz0", "2hz1", "timer0", "timer1"; + }; + }; +}; -- cgit v1.2.3 From ad90c2bc1e67e43243376c981ab856a4134d5dcc Mon Sep 17 00:00:00 2001 From: Andreas Färber Date: Sun, 26 Feb 2017 17:24:54 +0100 Subject: ARM: dts: owl-s500: Set CPU enable-method MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Use a custom S500 enable-method for all CPUs. Signed-off-by: Andreas Färber --- arch/arm/boot/dts/owl-s500.dtsi | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/owl-s500.dtsi b/arch/arm/boot/dts/owl-s500.dtsi index fc9f71a4106a..6d6024027ee2 100644 --- a/arch/arm/boot/dts/owl-s500.dtsi +++ b/arch/arm/boot/dts/owl-s500.dtsi @@ -28,24 +28,28 @@ device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <0x0>; + enable-method = "actions,s500-smp"; }; cpu1: cpu@1 { device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <0x1>; + enable-method = "actions,s500-smp"; }; cpu2: cpu@2 { device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <0x2>; + enable-method = "actions,s500-smp"; }; cpu3: cpu@3 { device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <0x3>; + enable-method = "actions,s500-smp"; }; }; -- cgit v1.2.3 From 740f6beb57b579ee69a3793dff1462a4020ec500 Mon Sep 17 00:00:00 2001 From: Andreas Färber Date: Sun, 26 Feb 2017 04:08:53 +0100 Subject: ARM: dts: owl-s500: Add SPS node MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Add Smart Power System node for PM domains. Signed-off-by: Andreas Färber --- arch/arm/boot/dts/owl-s500.dtsi | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/owl-s500.dtsi b/arch/arm/boot/dts/owl-s500.dtsi index 6d6024027ee2..51a48741d4c0 100644 --- a/arch/arm/boot/dts/owl-s500.dtsi +++ b/arch/arm/boot/dts/owl-s500.dtsi @@ -176,5 +176,11 @@ ; interrupt-names = "2hz0", "2hz1", "timer0", "timer1"; }; + + sps: power-controller@b01b0100 { + compatible = "actions,s500-sps"; + reg = <0xb01b0100 0x100>; + #power-domain-cells = <1>; + }; }; }; -- cgit v1.2.3 From a87027196803227dd9f4ee848f4aa2dbfe699c4c Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Thu, 20 Apr 2017 16:25:08 +0530 Subject: ARM: pxa: Use - instead of @ for DT OPP entries Compiling the DT file with W=1, DTC warns like follows: Warning (unit_address_vs_reg): Node /opp_table0/opp@1000000000 has a unit name, but no reg property Fix this by replacing '@' with '-' as the OPP nodes will never have a "reg" property. Reported-by: Krzysztof Kozlowski Reported-by: Masahiro Yamada Suggested-by: Mark Rutland Signed-off-by: Viresh Kumar Acked-by: Rob Herring Signed-off-by: Robert Jarzmik --- arch/arm/boot/dts/pxa25x.dtsi | 8 ++++---- arch/arm/boot/dts/pxa27x.dtsi | 14 +++++++------- 2 files changed, 11 insertions(+), 11 deletions(-) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/pxa25x.dtsi b/arch/arm/boot/dts/pxa25x.dtsi index f9f4726396a0..95d59be97213 100644 --- a/arch/arm/boot/dts/pxa25x.dtsi +++ b/arch/arm/boot/dts/pxa25x.dtsi @@ -93,22 +93,22 @@ pxa250_opp_table: opp_table0 { compatible = "operating-points-v2"; - opp@99532800 { + opp-99532800 { opp-hz = /bits/ 64 <99532800>; opp-microvolt = <1000000 950000 1650000>; clock-latency-ns = <20>; }; - opp@199065600 { + opp-199065600 { opp-hz = /bits/ 64 <199065600>; opp-microvolt = <1000000 950000 1650000>; clock-latency-ns = <20>; }; - opp@298598400 { + opp-298598400 { opp-hz = /bits/ 64 <298598400>; opp-microvolt = <1100000 1045000 1650000>; clock-latency-ns = <20>; }; - opp@398131200 { + opp-398131200 { opp-hz = /bits/ 64 <398131200>; opp-microvolt = <1300000 1235000 1650000>; clock-latency-ns = <20>; diff --git a/arch/arm/boot/dts/pxa27x.dtsi b/arch/arm/boot/dts/pxa27x.dtsi index e0fab48ba6fa..5f1d6da02a4c 100644 --- a/arch/arm/boot/dts/pxa27x.dtsi +++ b/arch/arm/boot/dts/pxa27x.dtsi @@ -141,37 +141,37 @@ pxa270_opp_table: opp_table0 { compatible = "operating-points-v2"; - opp@104000000 { + opp-104000000 { opp-hz = /bits/ 64 <104000000>; opp-microvolt = <900000 900000 1705000>; clock-latency-ns = <20>; }; - opp@156000000 { + opp-156000000 { opp-hz = /bits/ 64 <156000000>; opp-microvolt = <1000000 1000000 1705000>; clock-latency-ns = <20>; }; - opp@208000000 { + opp-208000000 { opp-hz = /bits/ 64 <208000000>; opp-microvolt = <1180000 1180000 1705000>; clock-latency-ns = <20>; }; - opp@312000000 { + opp-312000000 { opp-hz = /bits/ 64 <312000000>; opp-microvolt = <1250000 1250000 1705000>; clock-latency-ns = <20>; }; - opp@416000000 { + opp-416000000 { opp-hz = /bits/ 64 <416000000>; opp-microvolt = <1350000 1350000 1705000>; clock-latency-ns = <20>; }; - opp@520000000 { + opp-520000000 { opp-hz = /bits/ 64 <520000000>; opp-microvolt = <1450000 1450000 1705000>; clock-latency-ns = <20>; }; - opp@624000000 { + opp-624000000 { opp-hz = /bits/ 64 <624000000>; opp-microvolt = <1550000 1550000 1705000>; clock-latency-ns = <20>; -- cgit v1.2.3 From b8d9b3e407d16ccdc7d256af449e7d250074b5f4 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Tue, 9 May 2017 08:35:36 -0500 Subject: ARM: dts: socfpga: Fix the ethernet clock phandle The ethernet block clock phandle must point to the clock node which represents the clock which directly supply the ethernet block. This is emac_x_clk , not emacx_clk , so fix this. From: Pavel Machek Signed-off-by: Marek Vasut Signed-off-by: Dinh Nguyen --- arch/arm/boot/dts/socfpga.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/socfpga.dtsi b/arch/arm/boot/dts/socfpga.dtsi index b2674bdb8e6a..7e24dc8e82d4 100644 --- a/arch/arm/boot/dts/socfpga.dtsi +++ b/arch/arm/boot/dts/socfpga.dtsi @@ -557,7 +557,7 @@ interrupts = <0 115 4>; interrupt-names = "macirq"; mac-address = [00 00 00 00 00 00];/* Filled in by U-Boot */ - clocks = <&emac0_clk>; + clocks = <&emac_0_clk>; clock-names = "stmmaceth"; resets = <&rst EMAC0_RESET>; reset-names = "stmmaceth"; @@ -575,7 +575,7 @@ interrupts = <0 120 4>; interrupt-names = "macirq"; mac-address = [00 00 00 00 00 00];/* Filled in by U-Boot */ - clocks = <&emac1_clk>; + clocks = <&emac_1_clk>; clock-names = "stmmaceth"; resets = <&rst EMAC1_RESET>; reset-names = "stmmaceth"; -- cgit v1.2.3 From 79528279c0cc946d11c9920788391bcb24582991 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Tue, 9 May 2017 08:58:50 -0500 Subject: ARM: dts: socfpga: Enable QSPI support on VINING FPGA Enable the QSPI node and add the flash chips. Signed-off-by: Marek Vasut Signed-off-by: Dinh Nguyen --- arch/arm/boot/dts/socfpga_cyclone5_vining_fpga.dts | 38 ++++++++++++++++++++++ 1 file changed, 38 insertions(+) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/socfpga_cyclone5_vining_fpga.dts b/arch/arm/boot/dts/socfpga_cyclone5_vining_fpga.dts index 893198049397..cb4bdbcf54ee 100644 --- a/arch/arm/boot/dts/socfpga_cyclone5_vining_fpga.dts +++ b/arch/arm/boot/dts/socfpga_cyclone5_vining_fpga.dts @@ -300,6 +300,44 @@ }; }; +&qspi { + status = "okay"; + + n25q128@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "n25q128"; + reg = <0>; /* chip select */ + spi-max-frequency = <100000000>; + m25p,fast-read; + + cdns,page-size = <256>; + cdns,block-size = <16>; + cdns,read-delay = <4>; + cdns,tshsl-ns = <50>; + cdns,tsd2d-ns = <50>; + cdns,tchsh-ns = <4>; + cdns,tslch-ns = <4>; + }; + + n25q00@1 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "n25q00"; + reg = <1>; /* chip select */ + spi-max-frequency = <100000000>; + m25p,fast-read; + + cdns,page-size = <256>; + cdns,block-size = <16>; + cdns,read-delay = <4>; + cdns,tshsl-ns = <50>; + cdns,tsd2d-ns = <50>; + cdns,tchsh-ns = <4>; + cdns,tslch-ns = <4>; + }; +}; + &usb0 { dr_mode = "host"; status = "okay"; -- cgit v1.2.3 From ff3d90decb64fd90598cca8244d2c67e452d793e Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Tue, 9 May 2017 09:02:33 -0500 Subject: ARM: dts: socfpga: Remove I2C EEPROMs from VINING FPGA Remove the EEPROMs attached to the I2C expander ports which lead to the backplane slots from the main VIN|ING DTS file. These EEPROMs are bound using separate DTO files, which lets us handle both two-slot and six-slot configuration of the backplane. Signed-off-by: Marek Vasut Signed-off-by: Dinh Nguyen --- arch/arm/boot/dts/socfpga_cyclone5_vining_fpga.dts | 34 ++-------------------- 1 file changed, 2 insertions(+), 32 deletions(-) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/socfpga_cyclone5_vining_fpga.dts b/arch/arm/boot/dts/socfpga_cyclone5_vining_fpga.dts index cb4bdbcf54ee..268785ecb82a 100644 --- a/arch/arm/boot/dts/socfpga_cyclone5_vining_fpga.dts +++ b/arch/arm/boot/dts/socfpga_cyclone5_vining_fpga.dts @@ -203,69 +203,39 @@ #address-cells = <1>; #size-cells = <0>; reg = <0>; - eeprom@51 { - compatible = "at,24c01"; - pagesize = <8>; - reg = <0x51>; - }; }; i2c@1 { #address-cells = <1>; #size-cells = <0>; reg = <1>; - eeprom@51 { - compatible = "at,24c01"; - pagesize = <8>; - reg = <0x51>; - }; }; i2c@2 { #address-cells = <1>; #size-cells = <0>; reg = <2>; - eeprom@51 { - compatible = "at,24c01"; - pagesize = <8>; - reg = <0x51>; - }; }; i2c@3 { #address-cells = <1>; #size-cells = <0>; reg = <3>; - eeprom@51 { - compatible = "at,24c01"; - pagesize = <8>; - reg = <0x51>; - }; }; i2c@4 { #address-cells = <1>; #size-cells = <0>; reg = <4>; - eeprom@51 { - compatible = "at,24c01"; - pagesize = <8>; - reg = <0x51>; - }; }; i2c@5 { #address-cells = <1>; #size-cells = <0>; reg = <5>; - eeprom@51 { - compatible = "at,24c01"; - pagesize = <8>; - reg = <0x51>; - }; }; - i2c@6 { + i2c@6 { /* Backplane EEPROM */ #address-cells = <1>; #size-cells = <0>; reg = <6>; @@ -276,7 +246,7 @@ }; }; - i2c@7 { + i2c@7 { /* Power board EEPROM */ #address-cells = <1>; #size-cells = <0>; reg = <7>; -- cgit v1.2.3 From 3ca65aa18f15c75677affcbc8654c86e5dc6d87f Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Tue, 9 May 2017 09:06:06 -0500 Subject: ARM: dts: socfpga: Drop LED node from VINING FPGA Drop the LED node from VINing FPGA DT because the LED wiring is different on each mainboard revision. This wiring is therefore handled in mainboard DT Overlays. Signed-off-by: Marek Vasut Signed-off-by: Dinh Nguyen --- arch/arm/boot/dts/socfpga_cyclone5_vining_fpga.dts | 28 ---------------------- 1 file changed, 28 deletions(-) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/socfpga_cyclone5_vining_fpga.dts b/arch/arm/boot/dts/socfpga_cyclone5_vining_fpga.dts index 268785ecb82a..9195f11dacdc 100644 --- a/arch/arm/boot/dts/socfpga_cyclone5_vining_fpga.dts +++ b/arch/arm/boot/dts/socfpga_cyclone5_vining_fpga.dts @@ -71,34 +71,6 @@ ethernet0 = &gmac1; }; - leds { - compatible = "gpio-leds"; - - hps_led0 { - label = "hps:green:led0"; /* ALIVE_LED_GR */ - gpios = <&portb 19 0>; /* HPS_GPIO48 */ - linux,default-trigger = "heartbeat"; - }; - - hps_led1 { - label = "hps:red:led0"; /* ALIVE_LED_RD */ - gpios = <&portb 24 0>; /* HPS_GPIO53 */ - linux,default-trigger = "none"; - }; - - hps_led2 { - label = "hps:green:led1"; /* LINK2HOST_LED_GR */ - gpios = <&portb 25 0>; /* HPS_GPIO54 */ - linux,default-trigger = "heartbeat"; - }; - - hps_led3 { - label = "hps:red:led1"; /* LINK2HOST_LED_RD */ - gpios = <&portc 7 0>; /* HPS_GPIO65 */ - linux,default-trigger = "none"; - }; - }; - gpio-keys { compatible = "gpio-keys"; -- cgit v1.2.3 From 5b5ada57e4df56940d4855069754460b31666806 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Tue, 9 May 2017 09:07:57 -0500 Subject: ARM: dts: socfpga: Add second ethernet alias to VINING FPGA Add DT alias for the second ethernet present on mainboard rev 1.10. Signed-off-by: Marek Vasut Signed-off-by: Dinh Nguyen --- arch/arm/boot/dts/socfpga_cyclone5_vining_fpga.dts | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/socfpga_cyclone5_vining_fpga.dts b/arch/arm/boot/dts/socfpga_cyclone5_vining_fpga.dts index 9195f11dacdc..655fe87e272d 100644 --- a/arch/arm/boot/dts/socfpga_cyclone5_vining_fpga.dts +++ b/arch/arm/boot/dts/socfpga_cyclone5_vining_fpga.dts @@ -69,6 +69,7 @@ * to be added to the gmac1 device tree blob. */ ethernet0 = &gmac1; + ethernet1 = &gmac0; }; gpio-keys { -- cgit v1.2.3 From 3c56909ec2672d74d30f32f1c0ed8cfd7d6e2b14 Mon Sep 17 00:00:00 2001 From: Dinh Nguyen Date: Tue, 9 May 2017 09:21:08 -0500 Subject: ARM: dts: socfpga: set the i2c frequency Use 'clock-frequency' binding for the i2c node that will put the I2C driver into the standard operating mode. 'speed-mode' was not a valid binding for the I2C driver, remove it. Signed-off-by: Alan Tull Signed-off-by: Dinh Nguyen --- arch/arm/boot/dts/socfpga_arria10_socdk.dtsi | 2 +- arch/arm/boot/dts/socfpga_cyclone5_de0_sockit.dts | 2 +- arch/arm/boot/dts/socfpga_cyclone5_mcvevk.dts | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/socfpga_arria10_socdk.dtsi b/arch/arm/boot/dts/socfpga_arria10_socdk.dtsi index 94e088473823..3a32de9ded3b 100644 --- a/arch/arm/boot/dts/socfpga_arria10_socdk.dtsi +++ b/arch/arm/boot/dts/socfpga_arria10_socdk.dtsi @@ -130,13 +130,13 @@ }; &i2c1 { - speed-mode = <0>; status = "okay"; /* * adjust the falling times to decrease the i2c frequency to 50Khz * because the LCD module does not work at the standard 100Khz */ + clock-frequency = <100000>; i2c-sda-falling-time-ns = <6000>; i2c-scl-falling-time-ns = <6000>; diff --git a/arch/arm/boot/dts/socfpga_cyclone5_de0_sockit.dts b/arch/arm/boot/dts/socfpga_cyclone5_de0_sockit.dts index 7b49395452b6..b280e6494193 100644 --- a/arch/arm/boot/dts/socfpga_cyclone5_de0_sockit.dts +++ b/arch/arm/boot/dts/socfpga_cyclone5_de0_sockit.dts @@ -86,7 +86,7 @@ &i2c0 { status = "okay"; - speed-mode = <0>; + clock-frequency = <100000>; adxl345: adxl345@0 { compatible = "adi,adxl345"; diff --git a/arch/arm/boot/dts/socfpga_cyclone5_mcvevk.dts b/arch/arm/boot/dts/socfpga_cyclone5_mcvevk.dts index 21e397287e29..c2eb88aab8b3 100644 --- a/arch/arm/boot/dts/socfpga_cyclone5_mcvevk.dts +++ b/arch/arm/boot/dts/socfpga_cyclone5_mcvevk.dts @@ -58,7 +58,7 @@ &i2c0 { status = "okay"; - speed-mode = <0>; + clock-frequency = <100000>; stmpe1: stmpe811@41 { compatible = "st,stmpe811"; -- cgit v1.2.3