From 85a8c520ca41c719d552595d0aac456ac84b8a33 Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Wed, 7 Nov 2018 10:58:01 +0100 Subject: ARM: dts: sun7i: Change pinctrl nodes to avoid warning All our pinctrl nodes were using a node name convention with a unit-address to differentiate the different muxing options. However, since those nodes didn't have a reg property, they were generating warnings in DTC. In order to accomodate for this, convert the old nodes to the syntax we've been using for the new SoCs, including removing the letter suffix of the node labels to the bank of those pins to make things more readable. Signed-off-by: Maxime Ripard Acked-by: Chen-Yu Tsai --- arch/arm/boot/dts/sun7i-a20-cubietruck.dts | 22 +++++++++++----------- 1 file changed, 11 insertions(+), 11 deletions(-) (limited to 'arch/arm/boot/dts/sun7i-a20-cubietruck.dts') diff --git a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts index 0adcd0aab0aa..20069542336f 100644 --- a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts +++ b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts @@ -147,7 +147,7 @@ &gmac { pinctrl-names = "default"; - pinctrl-0 = <&gmac_pins_rgmii_a>; + pinctrl-0 = <&gmac_rgmii_pins>; phy = <&phy1>; phy-mode = "rgmii"; status = "okay"; @@ -169,7 +169,7 @@ &i2c0 { pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; + pinctrl-0 = <&i2c0_pins>; status = "okay"; axp209: pmic@34 { @@ -181,25 +181,25 @@ &i2c1 { pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; + pinctrl-0 = <&i2c1_pins>; status = "okay"; }; &i2c2 { pinctrl-names = "default"; - pinctrl-0 = <&i2c2_pins_a>; + pinctrl-0 = <&i2c2_pins>; status = "okay"; }; &ir0 { pinctrl-names = "default"; - pinctrl-0 = <&ir0_rx_pins_a>; + pinctrl-0 = <&ir0_rx_pin>; status = "okay"; }; &mmc0 { pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>; + pinctrl-0 = <&mmc0_pins>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */ @@ -208,7 +208,7 @@ &mmc3 { pinctrl-names = "default"; - pinctrl-0 = <&mmc3_pins_a>; + pinctrl-0 = <&mmc3_pins>; vmmc-supply = <®_vcc3v3>; mmc-pwrseq = <&mmc3_pwrseq>; bus-width = <4>; @@ -224,7 +224,7 @@ }; }; -&mmc3_pins_a { +&mmc3_pins { /* AP6210 requires pull-up */ bias-pull-up; }; @@ -243,7 +243,7 @@ &pwm { pinctrl-names = "default"; - pinctrl-0 = <&pwm0_pins_a>, <&pwm1_pins_a>; + pinctrl-0 = <&pwm0_pin>, <&pwm1_pin>; status = "okay"; }; @@ -302,13 +302,13 @@ &spdif { pinctrl-names = "default"; - pinctrl-0 = <&spdif_tx_pins_a>; + pinctrl-0 = <&spdif_tx_pin>; status = "okay"; }; &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pb_pins>; status = "okay"; }; -- cgit v1.2.3