From 1637d480f873ca305f7f090e3b3bc92430b5892f Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Tue, 30 Sep 2014 12:16:25 +0200 Subject: pinctrl: nomadik: force-convert to generic config bindings This converts the Nomadik pin controller and all associated device trees to use the standard, generic config bindings for pin controllers. There are no such device trees deployed in the wild so this is safe to do to set a good example. Signed-off-by: Linus Walleij --- arch/arm/boot/dts/ste-href-tvk1281618.dtsi | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) (limited to 'arch/arm/boot/dts/ste-href-tvk1281618.dtsi') diff --git a/arch/arm/boot/dts/ste-href-tvk1281618.dtsi b/arch/arm/boot/dts/ste-href-tvk1281618.dtsi index 18b65d1b14f2..062c6aae3afa 100644 --- a/arch/arm/boot/dts/ste-href-tvk1281618.dtsi +++ b/arch/arm/boot/dts/ste-href-tvk1281618.dtsi @@ -130,7 +130,7 @@ tc35893 { tc35893_tvk_mode: tc35893_tvk { tvk_cfg { - ste,pins = "GPIO218_AH11"; + pins = "GPIO218_AH11"; ste,config = <&gpio_in_pu>; }; }; @@ -138,7 +138,7 @@ prox { prox_tvk_mode: prox_tvk { tvk_cfg { - ste,pins = "GPIO217_AH12"; + pins = "GPIO217_AH12"; ste,config = <&gpio_in_pu>; }; }; @@ -146,7 +146,7 @@ hall { hall_tvk_mode: hall_tvk { tvk_cfg { - ste,pins = "GPIO145_C13"; + pins = "GPIO145_C13"; ste,config = <&gpio_in_pu>; }; }; @@ -155,7 +155,7 @@ accel_tvk_mode: accel_tvk { /* Accelerometer interrupt lines 1 & 2 */ tvk_cfg { - ste,pins = "GPIO82_C1", "GPIO83_D3"; + pins = "GPIO82_C1", "GPIO83_D3"; ste,config = <&gpio_in_pu>; }; }; @@ -164,11 +164,11 @@ magneto_tvk_mode: magneto_tvk { /* Magnetometer uses GPIO 31 and 32, pull these up/down respectively */ tvk_cfg1 { - ste,pins = "GPIO31_V3"; + pins = "GPIO31_V3"; ste,config = <&gpio_in_pu>; }; tvk_cfg2 { - ste,pins = "GPIO32_V2"; + pins = "GPIO32_V2"; ste,config = <&gpio_in_pd>; }; }; -- cgit v1.2.3