From e35e26b26e955c53e61c154ba26b9bb15da6b858 Mon Sep 17 00:00:00 2001 From: Carlo Caione Date: Fri, 7 Dec 2018 10:52:31 +0000 Subject: arm: dts: meson: Fix IRQ trigger type for macirq A long running stress test on a custom board shipping an AXG SoCs and a Realtek RTL8211F PHY revealed that after a few hours the connection speed would drop drastically, from ~1000Mbps to ~3Mbps. At the same time the 'macirq' (eth0) IRQ would stop being triggered at all and as consequence the GMAC IRQs never ACKed. After a painful investigation the problem seemed to be due to a wrong defined IRQ type for the GMAC IRQ that should be LEVEL_HIGH instead of EDGE_RISING. The change in the macirq IRQ type also solved another long standing issue affecting this SoC/PHY where EEE was causing the network connection to die after stressing it with iperf3 (even though much sooner). It's now possible to remove the 'eee-broken-1000t' quirk as well. Fixes: 9c15795a4f96 ("ARM: dts: meson8b-odroidc1: ethernet support") Signed-off-by: Carlo Caione Reviewed-by: Martin Blumenstingl Tested-by: Martin Blumenstingl Signed-off-by: Kevin Hilman --- arch/arm/boot/dts/meson.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm/boot/dts/meson.dtsi') diff --git a/arch/arm/boot/dts/meson.dtsi b/arch/arm/boot/dts/meson.dtsi index e4645f612712..2ab74860d962 100644 --- a/arch/arm/boot/dts/meson.dtsi +++ b/arch/arm/boot/dts/meson.dtsi @@ -274,7 +274,7 @@ compatible = "amlogic,meson6-dwmac", "snps,dwmac"; reg = <0xc9410000 0x10000 0xc1108108 0x4>; - interrupts = ; + interrupts = ; interrupt-names = "macirq"; status = "disabled"; }; -- cgit v1.2.3