From 0fe4d2181cc4cb3eba303c0e03f878d2558d0f3a Mon Sep 17 00:00:00 2001 From: Stefan Wahren Date: Fri, 31 Mar 2017 20:03:04 +0000 Subject: ARM: dts: bcm283x: Add CPU thermal zone with 1 trip point As suggested by Eduardo Valentin this adds the thermal zone for the bcm2835 SoC with its single thermal sensor. We start with the criticial trip point and leave the cooling devices empty since we don't have any at the moment. Since the coefficients could vary depending on the SoC we need to define them separate. Signed-off-by: Stefan Wahren Signed-off-by: Eric Anholt Acked-by: Eduardo Valentin --- arch/arm/boot/dts/bcm283x.dtsi | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) (limited to 'arch/arm/boot/dts/bcm283x.dtsi') diff --git a/arch/arm/boot/dts/bcm283x.dtsi b/arch/arm/boot/dts/bcm283x.dtsi index 561f27d8d922..86a5db53da8f 100644 --- a/arch/arm/boot/dts/bcm283x.dtsi +++ b/arch/arm/boot/dts/bcm283x.dtsi @@ -19,6 +19,26 @@ bootargs = "earlyprintk console=ttyAMA0"; }; + thermal-zones { + cpu_thermal: cpu-thermal { + polling-delay-passive = <0>; + polling-delay = <1000>; + + thermal-sensors = <&thermal>; + + trips { + cpu-crit { + temperature = <80000>; + hysteresis = <0>; + type = "critical"; + }; + }; + + cooling-maps { + }; + }; + }; + soc { compatible = "simple-bus"; #address-cells = <1>; @@ -430,6 +450,7 @@ compatible = "brcm,bcm2835-thermal"; reg = <0x7e212000 0x8>; clocks = <&clocks BCM2835_CLOCK_TSENS>; + #thermal-sensor-cells = <0>; status = "disabled"; }; -- cgit v1.2.3 From 860a5d0b262eb3a98f578ffbd4469723315fd778 Mon Sep 17 00:00:00 2001 From: Stefan Wahren Date: Sun, 21 May 2017 18:44:37 +0200 Subject: ARM: dts: bcm283x: Add generic USB PHY In order to use dwc2 in OTG or gadget mode the USB PHY should be specified. Since there is no bcm283x USB PHY driver use the generic one. Signed-off-by: Stefan Wahren Acked-by: Stephen Warren Signed-off-by: Eric Anholt --- arch/arm/boot/dts/bcm283x.dtsi | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'arch/arm/boot/dts/bcm283x.dtsi') diff --git a/arch/arm/boot/dts/bcm283x.dtsi b/arch/arm/boot/dts/bcm283x.dtsi index 86a5db53da8f..9a05cde8aced 100644 --- a/arch/arm/boot/dts/bcm283x.dtsi +++ b/arch/arm/boot/dts/bcm283x.dtsi @@ -589,6 +589,8 @@ #size-cells = <0>; clocks = <&clk_usb>; clock-names = "otg"; + phys = <&usbphy>; + phy-names = "usb2-phy"; }; v3d: v3d@7ec00000 { @@ -624,4 +626,8 @@ clock-frequency = <480000000>; }; }; + + usbphy: phy { + compatible = "usb-nop-xceiv"; + }; }; -- cgit v1.2.3