From 2344a29a923b95bb28609da4038590c4131160cc Mon Sep 17 00:00:00 2001 From: Arnaud Ebalard Date: Thu, 4 Jul 2013 23:16:46 +0200 Subject: ARM: mvebu: Add Netgear ReadyNAS 102 board All hardware parts of the (Armada 370 based) NETGEAR ReadyNAS 102 are supported by mainline kernel (USB 3.0 rear ports, USB 2.0 front port, Gigabit controller and PHY, serial port, leds, buttons, SATA ports, G762 fan controller) except for: - the Intersil ISL12057 I2C RTC Chip, - the Armada NAND controller. Support for both of those is currently work in progress and does not prevent boot. Signed-off-by: Arnaud Ebalard Acked-by: Gregory CLEMENT Signed-off-by: Jason Cooper --- arch/arm/boot/dts/armada-370-netgear-rn102.dts | 179 +++++++++++++++++++++++++ 1 file changed, 179 insertions(+) create mode 100644 arch/arm/boot/dts/armada-370-netgear-rn102.dts (limited to 'arch/arm/boot/dts/armada-370-netgear-rn102.dts') diff --git a/arch/arm/boot/dts/armada-370-netgear-rn102.dts b/arch/arm/boot/dts/armada-370-netgear-rn102.dts new file mode 100644 index 000000000000..d546edc73456 --- /dev/null +++ b/arch/arm/boot/dts/armada-370-netgear-rn102.dts @@ -0,0 +1,179 @@ +/* + * Device Tree file for NETGEAR ReadyNAS 102 + * + * Copyright (C) 2013, Arnaud EBALARD + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +/dts-v1/; + +/include/ "armada-370.dtsi" + +/ { + model = "NETGEAR ReadyNAS 102"; + compatible = "netgear,readynas-102", "marvell,armada370", "marvell,armada-370-xp"; + + chosen { + bootargs = "console=ttyS0,115200 earlyprintk"; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x20000000>; /* 512 MB */ + }; + + soc { + internal-regs { + serial@12000 { + clock-frequency = <200000000>; + status = "okay"; + }; + + sata@a0000 { + nr-ports = <2>; + status = "okay"; + }; + + pinctrl { + power_led_pin: power-led-pin { + marvell,pins = "mpp57"; + marvell,function = "gpio"; + }; + sata1_led_pin: sata1-led-pin { + marvell,pins = "mpp15"; + marvell,function = "gpio"; + }; + + sata2_led_pin: sata2-led-pin { + marvell,pins = "mpp14"; + marvell,function = "gpio"; + }; + + backup_led_pin: backup-led-pin { + marvell,pins = "mpp56"; + marvell,function = "gpio"; + }; + }; + + mdio { + phy0: ethernet-phy@0 { + reg = <0>; + }; + }; + + ethernet@74000 { + status = "okay"; + phy = <&phy0>; + phy-mode = "rgmii-id"; + }; + + usb@50000 { + status = "okay"; + }; + + i2c@11000 { + compatible = "marvell,mv64xxx-i2c"; + clock-frequency = <100000>; + status = "okay"; + + g762: g762@3e { + compatible = "gmt,g762"; + reg = <0x3e>; + clocks = <&g762_clk>; /* input clock */ + fan_gear_mode = <0>; + fan_startv = <1>; + pwm_polarity = <0>; + }; + }; + + pcie-controller { + status = "okay"; + + /* Connected to Marvell SATA controller */ + pcie@1,0 { + /* Port 0, Lane 0 */ + status = "okay"; + }; + + /* Connected to FL1009 USB 3.0 controller */ + pcie@2,0 { + /* Port 1, Lane 0 */ + status = "okay"; + }; + }; + }; + }; + + clocks { + #address-cells = <1>; + #size-cells = <0>; + + g762_clk: fixedclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <8192>; + }; + }; + + gpio_leds { + compatible = "gpio-leds"; + pinctrl-0 = < &power_led_pin + &sata1_led_pin + &sata2_led_pin + &backup_led_pin >; + pinctrl-names = "default"; + + blue_power_led { + label = "rn102:blue:pwr"; + gpios = <&gpio1 25 1>; /* GPIO 57 Active Low */ + linux,default-trigger = "heartbeat"; + }; + + green_sata1_led { + label = "rn102:green:sata1"; + gpios = <&gpio0 15 1>; /* GPIO 15 Active Low */ + default-state = "on"; + }; + + green_sata2_led { + label = "rn102:green:sata2"; + gpios = <&gpio0 14 1>; /* GPIO 14 Active Low */ + default-state = "on"; + }; + + green_backup_led { + label = "rn102:green:backup"; + gpios = <&gpio1 24 1>; /* GPIO 56 Active Low */ + default-state = "on"; + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + button@1 { + label = "Power Button"; + linux,code = <116>; /* KEY_POWER */ + gpios = <&gpio1 30 1>; + }; + + button@2 { + label = "Reset Button"; + linux,code = <0x198>; /* KEY_RESTART */ + gpios = <&gpio0 6 1>; + }; + + button@3 { + label = "Backup Button"; + linux,code = <133>; /* KEY_COPY */ + gpios = <&gpio1 26 1>; + }; + }; + +}; -- cgit v1.2.3