From ea25a153ee06bd1d17c7eff9e97d09dd9191f6e4 Mon Sep 17 00:00:00 2001 From: Eugeniy Paltsev Date: Wed, 23 Oct 2019 15:44:10 +0300 Subject: ARC: regenerate nSIM and HAPS defconfigs No functional change intended. Signed-off-by: Eugeniy Paltsev Signed-off-by: Vineet Gupta --- arch/arc/configs/haps_hs_defconfig | 10 ++-------- arch/arc/configs/haps_hs_smp_defconfig | 12 +++--------- arch/arc/configs/nsim_700_defconfig | 7 ++----- arch/arc/configs/nsim_hs_defconfig | 8 ++------ arch/arc/configs/nsim_hs_smp_defconfig | 10 +++------- 5 files changed, 12 insertions(+), 35 deletions(-) (limited to 'arch/arc') diff --git a/arch/arc/configs/haps_hs_defconfig b/arch/arc/configs/haps_hs_defconfig index 47ff8a97e42d..e22f40612089 100644 --- a/arch/arc/configs/haps_hs_defconfig +++ b/arch/arc/configs/haps_hs_defconfig @@ -4,6 +4,7 @@ CONFIG_POSIX_MQUEUE=y # CONFIG_CROSS_MEMORY_ATTACH is not set CONFIG_NO_HZ_IDLE=y CONFIG_HIGH_RES_TIMERS=y +CONFIG_PREEMPT=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_NAMESPACES=y @@ -15,13 +16,9 @@ CONFIG_EXPERT=y CONFIG_PERF_EVENTS=y # CONFIG_COMPAT_BRK is not set CONFIG_SLAB=y +CONFIG_ARC_BUILTIN_DTB_NAME="haps_hs" CONFIG_MODULES=y # CONFIG_BLK_DEV_BSG is not set -# CONFIG_IOSCHED_DEADLINE is not set -# CONFIG_IOSCHED_CFQ is not set -CONFIG_ISA_ARCV2=y -CONFIG_ARC_BUILTIN_DTB_NAME="haps_hs" -CONFIG_PREEMPT=y # CONFIG_COMPACTION is not set CONFIG_NET=y CONFIG_PACKET=y @@ -30,9 +27,6 @@ CONFIG_UNIX=y CONFIG_UNIX_DIAG=y CONFIG_NET_KEY=y CONFIG_INET=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set # CONFIG_IPV6 is not set # CONFIG_WIRELESS is not set CONFIG_DEVTMPFS=y diff --git a/arch/arc/configs/haps_hs_smp_defconfig b/arch/arc/configs/haps_hs_smp_defconfig index 9685fd5f57a4..ff4fcd7640a4 100644 --- a/arch/arc/configs/haps_hs_smp_defconfig +++ b/arch/arc/configs/haps_hs_smp_defconfig @@ -4,6 +4,7 @@ CONFIG_POSIX_MQUEUE=y # CONFIG_CROSS_MEMORY_ATTACH is not set CONFIG_NO_HZ_IDLE=y CONFIG_HIGH_RES_TIMERS=y +CONFIG_PREEMPT=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_NAMESPACES=y @@ -16,15 +17,11 @@ CONFIG_PERF_EVENTS=y # CONFIG_VM_EVENT_COUNTERS is not set # CONFIG_COMPAT_BRK is not set CONFIG_SLAB=y +CONFIG_SMP=y +CONFIG_ARC_BUILTIN_DTB_NAME="haps_hs_idu" CONFIG_KPROBES=y CONFIG_MODULES=y # CONFIG_BLK_DEV_BSG is not set -# CONFIG_IOSCHED_DEADLINE is not set -# CONFIG_IOSCHED_CFQ is not set -CONFIG_ISA_ARCV2=y -CONFIG_SMP=y -CONFIG_ARC_BUILTIN_DTB_NAME="haps_hs_idu" -CONFIG_PREEMPT=y # CONFIG_COMPACTION is not set CONFIG_NET=y CONFIG_PACKET=y @@ -33,9 +30,6 @@ CONFIG_UNIX=y CONFIG_UNIX_DIAG=y CONFIG_NET_KEY=y CONFIG_INET=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set # CONFIG_IPV6 is not set # CONFIG_WIRELESS is not set CONFIG_DEVTMPFS=y diff --git a/arch/arc/configs/nsim_700_defconfig b/arch/arc/configs/nsim_700_defconfig index 2b9b11474640..9b2653b0b349 100644 --- a/arch/arc/configs/nsim_700_defconfig +++ b/arch/arc/configs/nsim_700_defconfig @@ -4,6 +4,7 @@ CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y # CONFIG_CROSS_MEMORY_ATTACH is not set CONFIG_HIGH_RES_TIMERS=y +CONFIG_PREEMPT=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_NAMESPACES=y @@ -17,13 +18,10 @@ CONFIG_PERF_EVENTS=y # CONFIG_SLUB_DEBUG is not set # CONFIG_COMPAT_BRK is not set CONFIG_ISA_ARCOMPACT=y +CONFIG_ARC_BUILTIN_DTB_NAME="nsim_700" CONFIG_KPROBES=y CONFIG_MODULES=y # CONFIG_BLK_DEV_BSG is not set -# CONFIG_IOSCHED_DEADLINE is not set -# CONFIG_IOSCHED_CFQ is not set -CONFIG_ARC_BUILTIN_DTB_NAME="nsim_700" -CONFIG_PREEMPT=y # CONFIG_COMPACTION is not set CONFIG_NET=y CONFIG_PACKET=y @@ -39,7 +37,6 @@ CONFIG_DEVTMPFS=y CONFIG_NETDEVICES=y CONFIG_ARC_EMAC=y CONFIG_LXT_PHY=y -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set # CONFIG_INPUT_KEYBOARD is not set # CONFIG_INPUT_MOUSE is not set # CONFIG_SERIO is not set diff --git a/arch/arc/configs/nsim_hs_defconfig b/arch/arc/configs/nsim_hs_defconfig index bab3dd255841..60ad81769565 100644 --- a/arch/arc/configs/nsim_hs_defconfig +++ b/arch/arc/configs/nsim_hs_defconfig @@ -4,6 +4,7 @@ CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y # CONFIG_CROSS_MEMORY_ATTACH is not set CONFIG_HIGH_RES_TIMERS=y +CONFIG_PREEMPT=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_NAMESPACES=y @@ -16,17 +17,13 @@ CONFIG_EMBEDDED=y CONFIG_PERF_EVENTS=y # CONFIG_SLUB_DEBUG is not set # CONFIG_COMPAT_BRK is not set +CONFIG_ARC_BUILTIN_DTB_NAME="nsim_hs" CONFIG_KPROBES=y CONFIG_MODULES=y CONFIG_MODULE_FORCE_LOAD=y CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set -# CONFIG_IOSCHED_DEADLINE is not set -# CONFIG_IOSCHED_CFQ is not set -CONFIG_ISA_ARCV2=y -CONFIG_ARC_BUILTIN_DTB_NAME="nsim_hs" -CONFIG_PREEMPT=y # CONFIG_COMPACTION is not set CONFIG_NET=y CONFIG_PACKET=y @@ -39,7 +36,6 @@ CONFIG_DEVTMPFS=y # CONFIG_STANDALONE is not set # CONFIG_PREVENT_FIRMWARE_BUILD is not set # CONFIG_BLK_DEV is not set -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set # CONFIG_INPUT_KEYBOARD is not set # CONFIG_INPUT_MOUSE is not set # CONFIG_SERIO is not set diff --git a/arch/arc/configs/nsim_hs_smp_defconfig b/arch/arc/configs/nsim_hs_smp_defconfig index 90d2d50fb8dc..c7a29adfc147 100644 --- a/arch/arc/configs/nsim_hs_smp_defconfig +++ b/arch/arc/configs/nsim_hs_smp_defconfig @@ -2,6 +2,7 @@ # CONFIG_SWAP is not set # CONFIG_CROSS_MEMORY_ATTACH is not set CONFIG_HIGH_RES_TIMERS=y +CONFIG_PREEMPT=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_NAMESPACES=y @@ -14,18 +15,14 @@ CONFIG_EMBEDDED=y CONFIG_PERF_EVENTS=y # CONFIG_SLUB_DEBUG is not set # CONFIG_COMPAT_BRK is not set +CONFIG_SMP=y +CONFIG_ARC_BUILTIN_DTB_NAME="nsim_hs_idu" CONFIG_KPROBES=y CONFIG_MODULES=y CONFIG_MODULE_FORCE_LOAD=y CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set -# CONFIG_IOSCHED_DEADLINE is not set -# CONFIG_IOSCHED_CFQ is not set -CONFIG_ISA_ARCV2=y -CONFIG_SMP=y -CONFIG_ARC_BUILTIN_DTB_NAME="nsim_hs_idu" -CONFIG_PREEMPT=y # CONFIG_COMPACTION is not set CONFIG_NET=y CONFIG_PACKET=y @@ -38,7 +35,6 @@ CONFIG_DEVTMPFS=y # CONFIG_STANDALONE is not set # CONFIG_PREVENT_FIRMWARE_BUILD is not set # CONFIG_BLK_DEV is not set -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set # CONFIG_INPUT_KEYBOARD is not set # CONFIG_INPUT_MOUSE is not set # CONFIG_SERIO is not set -- cgit v1.2.3 From 4c36543e50a19989d12a39115ad7aeb2953027fa Mon Sep 17 00:00:00 2001 From: Eugeniy Paltsev Date: Wed, 23 Oct 2019 15:44:11 +0300 Subject: ARC: HAPS: cleanup defconfigs from unused IO-related options We don't have any peripherals on HAPS which may require FB or input_devices support. So get rid of them. Signed-off-by: Eugeniy Paltsev Signed-off-by: Vineet Gupta --- arch/arc/configs/haps_hs_defconfig | 9 +++------ arch/arc/configs/haps_hs_smp_defconfig | 9 +++------ 2 files changed, 6 insertions(+), 12 deletions(-) (limited to 'arch/arc') diff --git a/arch/arc/configs/haps_hs_defconfig b/arch/arc/configs/haps_hs_defconfig index e22f40612089..33b7a402b6bd 100644 --- a/arch/arc/configs/haps_hs_defconfig +++ b/arch/arc/configs/haps_hs_defconfig @@ -48,9 +48,9 @@ CONFIG_VIRTIO_NET=y # CONFIG_NET_VENDOR_WIZNET is not set # CONFIG_WLAN is not set CONFIG_INPUT_EVDEV=y -CONFIG_MOUSE_PS2_TOUCHKIT=y -# CONFIG_SERIO_SERPORT is not set -CONFIG_SERIO_ARC_PS2=y +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_SERIO is not set # CONFIG_LEGACY_PTYS is not set CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y @@ -60,9 +60,6 @@ CONFIG_SERIAL_8250_DW=y CONFIG_SERIAL_OF_PLATFORM=y # CONFIG_HW_RANDOM is not set # CONFIG_HWMON is not set -CONFIG_FB=y -CONFIG_FRAMEBUFFER_CONSOLE=y -CONFIG_LOGO=y # CONFIG_HID is not set # CONFIG_USB_SUPPORT is not set CONFIG_VIRTIO_MMIO=y diff --git a/arch/arc/configs/haps_hs_smp_defconfig b/arch/arc/configs/haps_hs_smp_defconfig index ff4fcd7640a4..5586511a00bf 100644 --- a/arch/arc/configs/haps_hs_smp_defconfig +++ b/arch/arc/configs/haps_hs_smp_defconfig @@ -49,9 +49,9 @@ CONFIG_NETDEVICES=y # CONFIG_NET_VENDOR_WIZNET is not set # CONFIG_WLAN is not set CONFIG_INPUT_EVDEV=y -CONFIG_MOUSE_PS2_TOUCHKIT=y -# CONFIG_SERIO_SERPORT is not set -CONFIG_SERIO_ARC_PS2=y +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_SERIO is not set # CONFIG_LEGACY_PTYS is not set CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y @@ -61,9 +61,6 @@ CONFIG_SERIAL_8250_DW=y CONFIG_SERIAL_OF_PLATFORM=y # CONFIG_HW_RANDOM is not set # CONFIG_HWMON is not set -CONFIG_FB=y -CONFIG_FRAMEBUFFER_CONSOLE=y -CONFIG_LOGO=y # CONFIG_HID is not set # CONFIG_USB_SUPPORT is not set # CONFIG_IOMMU_SUPPORT is not set -- cgit v1.2.3 From 3696fc9774c54e0599fe2d85e84211f26eead8b8 Mon Sep 17 00:00:00 2001 From: Eugeniy Paltsev Date: Wed, 23 Oct 2019 15:44:12 +0300 Subject: ARC: HAPS: use same UART configuration everywhere For some reason we use ns8250 UART compatible on UP HAPS configuration and ns16550a (which is ns8250 with FIFO support) on SMP HAPS configuration. Given that we have same UART IP with same IP configuration on both HAPS configuration use ns16550a compatible everywhere. Signed-off-by: Eugeniy Paltsev Signed-off-by: Vineet Gupta --- arch/arc/boot/dts/haps_hs.dts | 2 +- arch/arc/boot/dts/haps_hs_idu.dts | 1 - 2 files changed, 1 insertion(+), 2 deletions(-) (limited to 'arch/arc') diff --git a/arch/arc/boot/dts/haps_hs.dts b/arch/arc/boot/dts/haps_hs.dts index 44bc522fdec8..11fad2f79056 100644 --- a/arch/arc/boot/dts/haps_hs.dts +++ b/arch/arc/boot/dts/haps_hs.dts @@ -47,7 +47,7 @@ }; uart0: serial@f0000000 { - compatible = "ns8250"; + compatible = "ns16550a"; reg = <0xf0000000 0x2000>; interrupts = <24>; clock-frequency = <50000000>; diff --git a/arch/arc/boot/dts/haps_hs_idu.dts b/arch/arc/boot/dts/haps_hs_idu.dts index 4d6971cf5f9f..738c76cd07b3 100644 --- a/arch/arc/boot/dts/haps_hs_idu.dts +++ b/arch/arc/boot/dts/haps_hs_idu.dts @@ -54,7 +54,6 @@ }; uart0: serial@f0000000 { - /* compatible = "ns8250"; Doesn't use FIFOs */ compatible = "ns16550a"; reg = <0xf0000000 0x2000>; interrupt-parent = <&idu_intc>; -- cgit v1.2.3 From 14fa486f5ae3fda7de0d05608f0f829a6e7298ed Mon Sep 17 00:00:00 2001 From: Eugeniy Paltsev Date: Wed, 23 Oct 2019 15:44:13 +0300 Subject: ARC: HAPS: add HIGHMEM memory zone to DTS This is required as a preparation of merging nSIM and HASP defonfig and device tree. As we have HIGHMEM disabled in both HAPS and nSIM defconfigs this doesn't lead to any functional change. Signed-off-by: Eugeniy Paltsev Signed-off-by: Vineet Gupta --- arch/arc/boot/dts/haps_hs.dts | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-) (limited to 'arch/arc') diff --git a/arch/arc/boot/dts/haps_hs.dts b/arch/arc/boot/dts/haps_hs.dts index 11fad2f79056..60d578e2781f 100644 --- a/arch/arc/boot/dts/haps_hs.dts +++ b/arch/arc/boot/dts/haps_hs.dts @@ -9,13 +9,15 @@ / { model = "snps,zebu_hs"; compatible = "snps,zebu_hs"; - #address-cells = <1>; - #size-cells = <1>; + #address-cells = <2>; + #size-cells = <2>; interrupt-parent = <&core_intc>; memory { device_type = "memory"; - reg = <0x80000000 0x20000000>; /* 512 */ + /* CONFIG_LINUX_RAM_BASE needs to match low mem start */ + reg = <0x0 0x80000000 0x0 0x20000000 /* 512 MB low mem */ + 0x1 0x00000000 0x0 0x40000000>; /* 1 GB highmem */ }; chosen { @@ -31,8 +33,9 @@ #address-cells = <1>; #size-cells = <1>; - /* child and parent address space 1:1 mapped */ - ranges; + /* only perip space at end of low mem accessible + bus addr, parent bus addr, size */ + ranges = <0x80000000 0x0 0x80000000 0x80000000>; core_clk: core_clk { #clock-cells = <0>; -- cgit v1.2.3 From 8ae5bb05d7f4777955ab4392d5b4e14d214d1696 Mon Sep 17 00:00:00 2001 From: Eugeniy Paltsev Date: Wed, 23 Oct 2019 15:44:14 +0300 Subject: ARC: HAPS: cleanup defconfigs from unused ETH drivers We have multiple vendors ethernet drivers enabled in haps_hs and haps_hs_smp defconfig. The only one we possibly require is VIRTIO_NET. So disable unused ones via disabling entire CONFIG_ETHERNET which controls all vendor-specific ethernet drivers. Signed-off-by: Eugeniy Paltsev Signed-off-by: Vineet Gupta --- arch/arc/configs/haps_hs_defconfig | 11 +---------- arch/arc/configs/haps_hs_smp_defconfig | 11 +---------- 2 files changed, 2 insertions(+), 20 deletions(-) (limited to 'arch/arc') diff --git a/arch/arc/configs/haps_hs_defconfig b/arch/arc/configs/haps_hs_defconfig index 33b7a402b6bd..7337cdf4ffdd 100644 --- a/arch/arc/configs/haps_hs_defconfig +++ b/arch/arc/configs/haps_hs_defconfig @@ -36,16 +36,7 @@ CONFIG_DEVTMPFS_MOUNT=y CONFIG_VIRTIO_BLK=y CONFIG_NETDEVICES=y CONFIG_VIRTIO_NET=y -# CONFIG_NET_VENDOR_ARC is not set -# CONFIG_NET_VENDOR_BROADCOM is not set -# CONFIG_NET_VENDOR_INTEL is not set -# CONFIG_NET_VENDOR_MARVELL is not set -# CONFIG_NET_VENDOR_MICREL is not set -# CONFIG_NET_VENDOR_NATSEMI is not set -# CONFIG_NET_VENDOR_SEEQ is not set -# CONFIG_NET_VENDOR_STMICRO is not set -# CONFIG_NET_VENDOR_VIA is not set -# CONFIG_NET_VENDOR_WIZNET is not set +# CONFIG_ETHERNET is not set # CONFIG_WLAN is not set CONFIG_INPUT_EVDEV=y # CONFIG_INPUT_KEYBOARD is not set diff --git a/arch/arc/configs/haps_hs_smp_defconfig b/arch/arc/configs/haps_hs_smp_defconfig index 5586511a00bf..bc927221afc0 100644 --- a/arch/arc/configs/haps_hs_smp_defconfig +++ b/arch/arc/configs/haps_hs_smp_defconfig @@ -37,16 +37,7 @@ CONFIG_DEVTMPFS=y # CONFIG_PREVENT_FIRMWARE_BUILD is not set # CONFIG_BLK_DEV is not set CONFIG_NETDEVICES=y -# CONFIG_NET_VENDOR_ARC is not set -# CONFIG_NET_VENDOR_BROADCOM is not set -# CONFIG_NET_VENDOR_INTEL is not set -# CONFIG_NET_VENDOR_MARVELL is not set -# CONFIG_NET_VENDOR_MICREL is not set -# CONFIG_NET_VENDOR_NATSEMI is not set -# CONFIG_NET_VENDOR_SEEQ is not set -# CONFIG_NET_VENDOR_STMICRO is not set -# CONFIG_NET_VENDOR_VIA is not set -# CONFIG_NET_VENDOR_WIZNET is not set +# CONFIG_ETHERNET is not set # CONFIG_WLAN is not set CONFIG_INPUT_EVDEV=y # CONFIG_INPUT_KEYBOARD is not set -- cgit v1.2.3 From 1681baa713aa138d3f0f77f05c3de1cd6416c7d6 Mon Sep 17 00:00:00 2001 From: Eugeniy Paltsev Date: Wed, 23 Oct 2019 15:44:15 +0300 Subject: ARC: merge HAPS-HS with nSIM-HS configs Starting from nSIM 2019.06 is possible to use DW UART instead of ARC UART. That allows us to merge "nsim_hs" with "haps_hs" and "nsim_hs_smp" with "haps_hs_smp" with minor changes which were done in previous commits. We eliminate nsim_hs_defconfig and nsim_hs_smp_defconfig and leave haps_hs_defconfig and haps_hs_smp_defconfig which can be used on HAPS / nSIM / ZEBU / QEMU platforms without additional changes in Linux kernel. For nSIM we should now use UART property values "-prop=nsim_mem-dev=uart0,kind=dwuart,base=0xf0000000" instead of previously used "-prop=nsim_mem-dev=uart0,base=0xc0fc1000" "use_connect" and "irq" values of UART property remains untouched. Signed-off-by: Eugeniy Paltsev Signed-off-by: Vineet Gupta --- arch/arc/Makefile | 2 +- arch/arc/boot/dts/nsim_hs.dts | 67 ---------------------------------- arch/arc/boot/dts/nsim_hs_idu.dts | 65 --------------------------------- arch/arc/configs/nsim_hs_defconfig | 56 ---------------------------- arch/arc/configs/nsim_hs_smp_defconfig | 54 --------------------------- arch/arc/plat-sim/platform.c | 1 - 6 files changed, 1 insertion(+), 244 deletions(-) delete mode 100644 arch/arc/boot/dts/nsim_hs.dts delete mode 100644 arch/arc/boot/dts/nsim_hs_idu.dts delete mode 100644 arch/arc/configs/nsim_hs_defconfig delete mode 100644 arch/arc/configs/nsim_hs_smp_defconfig (limited to 'arch/arc') diff --git a/arch/arc/Makefile b/arch/arc/Makefile index f1c44cccf8d6..20e9ab6cc521 100644 --- a/arch/arc/Makefile +++ b/arch/arc/Makefile @@ -3,7 +3,7 @@ # Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com) # -KBUILD_DEFCONFIG := nsim_hs_defconfig +KBUILD_DEFCONFIG := haps_hs_smp_defconfig ifeq ($(CROSS_COMPILE),) CROSS_COMPILE := $(call cc-cross-prefix, arc-linux- arceb-linux-) diff --git a/arch/arc/boot/dts/nsim_hs.dts b/arch/arc/boot/dts/nsim_hs.dts deleted file mode 100644 index 851798a5f4e3..000000000000 --- a/arch/arc/boot/dts/nsim_hs.dts +++ /dev/null @@ -1,67 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Copyright (C) 2014-15 Synopsys, Inc. (www.synopsys.com) - */ -/dts-v1/; - -/include/ "skeleton_hs.dtsi" - -/ { - model = "snps,nsim_hs"; - compatible = "snps,nsim_hs"; - #address-cells = <2>; - #size-cells = <2>; - interrupt-parent = <&core_intc>; - - memory { - device_type = "memory"; - /* CONFIG_LINUX_RAM_BASE needs to match low mem start */ - reg = <0x0 0x80000000 0x0 0x20000000 /* 512 MB low mem */ - 0x1 0x00000000 0x0 0x40000000>; /* 1 GB highmem */ - }; - - chosen { - bootargs = "earlycon=arc_uart,mmio32,0xc0fc1000,115200n8 console=ttyARC0,115200n8 print-fatal-signals=1"; - }; - - aliases { - serial0 = &arcuart0; - }; - - fpga { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - - /* only perip space at end of low mem accessible - bus addr, parent bus addr, size */ - ranges = <0x80000000 0x0 0x80000000 0x80000000>; - - core_clk: core_clk { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <80000000>; - }; - - core_intc: core-interrupt-controller { - compatible = "snps,archs-intc"; - interrupt-controller; - #interrupt-cells = <1>; - }; - - arcuart0: serial@c0fc1000 { - compatible = "snps,arc-uart"; - reg = <0xc0fc1000 0x100>; - interrupts = <24>; - clock-frequency = <80000000>; - current-speed = <115200>; - status = "okay"; - }; - - arcpct0: pct { - compatible = "snps,archs-pct"; - #interrupt-cells = <1>; - interrupts = <20>; - }; - }; -}; diff --git a/arch/arc/boot/dts/nsim_hs_idu.dts b/arch/arc/boot/dts/nsim_hs_idu.dts deleted file mode 100644 index 6c559a0bd1f5..000000000000 --- a/arch/arc/boot/dts/nsim_hs_idu.dts +++ /dev/null @@ -1,65 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Copyright (C) 2014-15 Synopsys, Inc. (www.synopsys.com) - */ -/dts-v1/; - -/include/ "skeleton_hs_idu.dtsi" - -/ { - model = "snps,nsim_hs-smp"; - compatible = "snps,nsim_hs"; - interrupt-parent = <&core_intc>; - - chosen { - bootargs = "earlycon=arc_uart,mmio32,0xc0fc1000,115200n8 console=ttyARC0,115200n8 print-fatal-signals=1"; - }; - - aliases { - serial0 = &arcuart0; - }; - - fpga { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - - /* child and parent address space 1:1 mapped */ - ranges; - - core_clk: core_clk { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <80000000>; - }; - - core_intc: core-interrupt-controller { - compatible = "snps,archs-intc"; - interrupt-controller; - #interrupt-cells = <1>; - }; - - idu_intc: idu-interrupt-controller { - compatible = "snps,archs-idu-intc"; - interrupt-controller; - interrupt-parent = <&core_intc>; - #interrupt-cells = <1>; - }; - - arcuart0: serial@c0fc1000 { - compatible = "snps,arc-uart"; - reg = <0xc0fc1000 0x100>; - interrupt-parent = <&idu_intc>; - interrupts = <0>; - clock-frequency = <80000000>; - current-speed = <115200>; - status = "okay"; - }; - - arcpct0: pct { - compatible = "snps,archs-pct"; - #interrupt-cells = <1>; - interrupts = <20>; - }; - }; -}; diff --git a/arch/arc/configs/nsim_hs_defconfig b/arch/arc/configs/nsim_hs_defconfig deleted file mode 100644 index 60ad81769565..000000000000 --- a/arch/arc/configs/nsim_hs_defconfig +++ /dev/null @@ -1,56 +0,0 @@ -# CONFIG_LOCALVERSION_AUTO is not set -# CONFIG_SWAP is not set -CONFIG_SYSVIPC=y -CONFIG_POSIX_MQUEUE=y -# CONFIG_CROSS_MEMORY_ATTACH is not set -CONFIG_HIGH_RES_TIMERS=y -CONFIG_PREEMPT=y -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y -CONFIG_NAMESPACES=y -# CONFIG_UTS_NS is not set -# CONFIG_PID_NS is not set -CONFIG_BLK_DEV_INITRD=y -CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE_O3=y -CONFIG_KALLSYMS_ALL=y -CONFIG_EMBEDDED=y -CONFIG_PERF_EVENTS=y -# CONFIG_SLUB_DEBUG is not set -# CONFIG_COMPAT_BRK is not set -CONFIG_ARC_BUILTIN_DTB_NAME="nsim_hs" -CONFIG_KPROBES=y -CONFIG_MODULES=y -CONFIG_MODULE_FORCE_LOAD=y -CONFIG_MODULE_UNLOAD=y -CONFIG_MODULE_FORCE_UNLOAD=y -# CONFIG_BLK_DEV_BSG is not set -# CONFIG_COMPACTION is not set -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_UNIX_DIAG=y -CONFIG_NET_KEY=y -CONFIG_INET=y -# CONFIG_IPV6 is not set -CONFIG_DEVTMPFS=y -# CONFIG_STANDALONE is not set -# CONFIG_PREVENT_FIRMWARE_BUILD is not set -# CONFIG_BLK_DEV is not set -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_SERIO is not set -# CONFIG_LEGACY_PTYS is not set -CONFIG_SERIAL_ARC=y -CONFIG_SERIAL_ARC_CONSOLE=y -# CONFIG_HW_RANDOM is not set -# CONFIG_HWMON is not set -# CONFIG_HID is not set -# CONFIG_USB_SUPPORT is not set -# CONFIG_IOMMU_SUPPORT is not set -CONFIG_EXT2_FS=y -CONFIG_EXT2_FS_XATTR=y -CONFIG_TMPFS=y -# CONFIG_MISC_FILESYSTEMS is not set -CONFIG_NFS_FS=y -# CONFIG_ENABLE_MUST_CHECK is not set -# CONFIG_DEBUG_PREEMPT is not set diff --git a/arch/arc/configs/nsim_hs_smp_defconfig b/arch/arc/configs/nsim_hs_smp_defconfig deleted file mode 100644 index c7a29adfc147..000000000000 --- a/arch/arc/configs/nsim_hs_smp_defconfig +++ /dev/null @@ -1,54 +0,0 @@ -# CONFIG_LOCALVERSION_AUTO is not set -# CONFIG_SWAP is not set -# CONFIG_CROSS_MEMORY_ATTACH is not set -CONFIG_HIGH_RES_TIMERS=y -CONFIG_PREEMPT=y -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y -CONFIG_NAMESPACES=y -# CONFIG_UTS_NS is not set -# CONFIG_PID_NS is not set -CONFIG_BLK_DEV_INITRD=y -CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE_O3=y -CONFIG_KALLSYMS_ALL=y -CONFIG_EMBEDDED=y -CONFIG_PERF_EVENTS=y -# CONFIG_SLUB_DEBUG is not set -# CONFIG_COMPAT_BRK is not set -CONFIG_SMP=y -CONFIG_ARC_BUILTIN_DTB_NAME="nsim_hs_idu" -CONFIG_KPROBES=y -CONFIG_MODULES=y -CONFIG_MODULE_FORCE_LOAD=y -CONFIG_MODULE_UNLOAD=y -CONFIG_MODULE_FORCE_UNLOAD=y -# CONFIG_BLK_DEV_BSG is not set -# CONFIG_COMPACTION is not set -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_UNIX_DIAG=y -CONFIG_NET_KEY=y -CONFIG_INET=y -# CONFIG_IPV6 is not set -CONFIG_DEVTMPFS=y -# CONFIG_STANDALONE is not set -# CONFIG_PREVENT_FIRMWARE_BUILD is not set -# CONFIG_BLK_DEV is not set -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_SERIO is not set -# CONFIG_LEGACY_PTYS is not set -CONFIG_SERIAL_ARC=y -CONFIG_SERIAL_ARC_CONSOLE=y -# CONFIG_HW_RANDOM is not set -# CONFIG_HWMON is not set -# CONFIG_HID is not set -# CONFIG_USB_SUPPORT is not set -# CONFIG_IOMMU_SUPPORT is not set -CONFIG_EXT2_FS=y -CONFIG_EXT2_FS_XATTR=y -CONFIG_TMPFS=y -# CONFIG_MISC_FILESYSTEMS is not set -CONFIG_NFS_FS=y -# CONFIG_ENABLE_MUST_CHECK is not set diff --git a/arch/arc/plat-sim/platform.c b/arch/arc/plat-sim/platform.c index 3765dedcd319..2bde2a6e336a 100644 --- a/arch/arc/plat-sim/platform.c +++ b/arch/arc/plat-sim/platform.c @@ -21,7 +21,6 @@ static const char *simulation_compat[] __initconst = { "snps,nsim", "snps,nsimosci", #else - "snps,nsim_hs", "snps,nsimosci_hs", "snps,zebu_hs", #endif -- cgit v1.2.3 From 9c6375f77b09446e6781770dc49347f77d679496 Mon Sep 17 00:00:00 2001 From: Eugeniy Paltsev Date: Wed, 23 Oct 2019 15:44:16 +0300 Subject: ARC: nSIM_700: switch to DW UART usage Switch nsim_700_defconfig to dwuart for consistent uart settings for all nSIM configurations. Signed-off-by: Eugeniy Paltsev Signed-off-by: Vineet Gupta --- arch/arc/boot/dts/nsim_700.dts | 20 +++++++++++--------- arch/arc/configs/nsim_700_defconfig | 8 ++++++-- 2 files changed, 17 insertions(+), 11 deletions(-) (limited to 'arch/arc') diff --git a/arch/arc/boot/dts/nsim_700.dts b/arch/arc/boot/dts/nsim_700.dts index 63dbaab1247d..ae9bc21fe11b 100644 --- a/arch/arc/boot/dts/nsim_700.dts +++ b/arch/arc/boot/dts/nsim_700.dts @@ -14,11 +14,11 @@ interrupt-parent = <&core_intc>; chosen { - bootargs = "earlycon=arc_uart,mmio32,0xc0fc1000,115200n8 console=ttyARC0,115200n8 print-fatal-signals=1"; + bootargs = "earlycon=uart8250,mmio32,0xf0000000,115200n8 console=ttyS0,115200n8 print-fatal-signals=1"; }; aliases { - serial0 = &arcuart0; + serial0 = &uart0; }; fpga { @@ -41,13 +41,15 @@ #interrupt-cells = <1>; }; - arcuart0: serial@c0fc1000 { - compatible = "snps,arc-uart"; - reg = <0xc0fc1000 0x100>; - interrupts = <5>; - clock-frequency = <80000000>; - current-speed = <115200>; - status = "okay"; + uart0: serial@f0000000 { + compatible = "ns16550a"; + reg = <0xf0000000 0x2000>; + interrupts = <24>; + clock-frequency = <50000000>; + baud = <115200>; + reg-shift = <2>; + reg-io-width = <4>; + no-loopback-test = <1>; }; ethernet@c0fc2000 { diff --git a/arch/arc/configs/nsim_700_defconfig b/arch/arc/configs/nsim_700_defconfig index 9b2653b0b349..5c488140f537 100644 --- a/arch/arc/configs/nsim_700_defconfig +++ b/arch/arc/configs/nsim_700_defconfig @@ -41,8 +41,12 @@ CONFIG_LXT_PHY=y # CONFIG_INPUT_MOUSE is not set # CONFIG_SERIO is not set # CONFIG_LEGACY_PTYS is not set -CONFIG_SERIAL_ARC=y -CONFIG_SERIAL_ARC_CONSOLE=y +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=1 +CONFIG_SERIAL_8250_RUNTIME_UARTS=1 +CONFIG_SERIAL_8250_DW=y +CONFIG_SERIAL_OF_PLATFORM=y # CONFIG_HW_RANDOM is not set # CONFIG_HWMON is not set # CONFIG_HID is not set -- cgit v1.2.3 From 7b491c0b62594a21cab357e0118603830a500de3 Mon Sep 17 00:00:00 2001 From: Eugeniy Paltsev Date: Wed, 23 Oct 2019 15:44:17 +0300 Subject: ARC: nSIM_700: remove unused network options We have snps,arc-emac enabled in nSIM_700. It's obsolete and it's not used anymore so remove its device tree node and disable unused network options in defconfig. Signed-off-by: Eugeniy Paltsev Signed-off-by: Vineet Gupta --- arch/arc/boot/dts/nsim_700.dts | 16 ---------------- arch/arc/configs/nsim_700_defconfig | 4 ++-- 2 files changed, 2 insertions(+), 18 deletions(-) (limited to 'arch/arc') diff --git a/arch/arc/boot/dts/nsim_700.dts b/arch/arc/boot/dts/nsim_700.dts index ae9bc21fe11b..f8832a15e174 100644 --- a/arch/arc/boot/dts/nsim_700.dts +++ b/arch/arc/boot/dts/nsim_700.dts @@ -52,22 +52,6 @@ no-loopback-test = <1>; }; - ethernet@c0fc2000 { - compatible = "snps,arc-emac"; - reg = <0xc0fc2000 0x3c>; - interrupts = <6>; - mac-address = [ 00 11 22 33 44 55 ]; - clock-frequency = <80000000>; - max-speed = <100>; - phy = <&phy0>; - - #address-cells = <1>; - #size-cells = <0>; - phy0: ethernet-phy@0 { - reg = <1>; - }; - }; - arcpct0: pct { compatible = "snps,arc700-pct"; }; diff --git a/arch/arc/configs/nsim_700_defconfig b/arch/arc/configs/nsim_700_defconfig index 5c488140f537..326f6cde7826 100644 --- a/arch/arc/configs/nsim_700_defconfig +++ b/arch/arc/configs/nsim_700_defconfig @@ -35,8 +35,8 @@ CONFIG_DEVTMPFS=y # CONFIG_PREVENT_FIRMWARE_BUILD is not set # CONFIG_BLK_DEV is not set CONFIG_NETDEVICES=y -CONFIG_ARC_EMAC=y -CONFIG_LXT_PHY=y +# CONFIG_ETHERNET is not set +# CONFIG_WLAN is not set # CONFIG_INPUT_KEYBOARD is not set # CONFIG_INPUT_MOUSE is not set # CONFIG_SERIO is not set -- cgit v1.2.3 From cfd9d70a855edf6adb37d0ed88be9e35274dbe49 Mon Sep 17 00:00:00 2001 From: Vineet Gupta Date: Thu, 13 Nov 2014 19:27:24 +0530 Subject: ARCv2: mm: TLB Miss optim: SMP builds can cache pgd pointer in mmu scratch reg ARC700 exception (and intr handling) didn't have auto stack switching thus had to rely on stashing a reg temporarily (to free it up) at a known place in memory, allowing to code up the low level stack switching. This however was not re-entrant in SMP which thus had to repurpose the per-cpu MMU SCRATCH DATA register otherwise used to "cache" the task pdg pointer (vs. reading it from mm struct) The newer HS cores do have auto-stack switching and thus even SMP builds can use the MMU SCRATCH reg as originally intended. This patch fixes the restriction to ARC700 SMP builds only Signed-off-by: Vineet Gupta --- arch/arc/include/asm/entry-compact.h | 4 ++-- arch/arc/include/asm/mmu.h | 4 ++++ arch/arc/include/asm/mmu_context.h | 2 +- arch/arc/include/asm/pgtable.h | 2 +- arch/arc/mm/tlb.c | 2 +- arch/arc/mm/tlbex.S | 2 +- 6 files changed, 10 insertions(+), 6 deletions(-) (limited to 'arch/arc') diff --git a/arch/arc/include/asm/entry-compact.h b/arch/arc/include/asm/entry-compact.h index 66a292335ee6..c3aa775878dc 100644 --- a/arch/arc/include/asm/entry-compact.h +++ b/arch/arc/include/asm/entry-compact.h @@ -130,7 +130,7 @@ * to be saved again on kernel mode stack, as part of pt_regs. *-------------------------------------------------------------*/ .macro PROLOG_FREEUP_REG reg, mem -#ifdef CONFIG_SMP +#ifndef ARC_USE_SCRATCH_REG sr \reg, [ARC_REG_SCRATCH_DATA0] #else st \reg, [\mem] @@ -138,7 +138,7 @@ .endm .macro PROLOG_RESTORE_REG reg, mem -#ifdef CONFIG_SMP +#ifndef ARC_USE_SCRATCH_REG lr \reg, [ARC_REG_SCRATCH_DATA0] #else ld \reg, [\mem] diff --git a/arch/arc/include/asm/mmu.h b/arch/arc/include/asm/mmu.h index 98cadf1a09ac..0abacb82a72b 100644 --- a/arch/arc/include/asm/mmu.h +++ b/arch/arc/include/asm/mmu.h @@ -40,6 +40,10 @@ #define ARC_REG_SCRATCH_DATA0 0x46c #endif +#if defined(CONFIG_ISA_ARCV2) || !defined(CONFIG_SMP) +#define ARC_USE_SCRATCH_REG +#endif + /* Bits in MMU PID register */ #define __TLB_ENABLE (1 << 31) #define __PROG_ENABLE (1 << 30) diff --git a/arch/arc/include/asm/mmu_context.h b/arch/arc/include/asm/mmu_context.h index 035470816be5..3a5e6a5b9ed6 100644 --- a/arch/arc/include/asm/mmu_context.h +++ b/arch/arc/include/asm/mmu_context.h @@ -144,7 +144,7 @@ static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next, */ cpumask_set_cpu(cpu, mm_cpumask(next)); -#ifndef CONFIG_SMP +#ifdef ARC_USE_SCRATCH_REG /* PGD cached in MMU reg to avoid 3 mem lookups: task->mm->pgd */ write_aux_reg(ARC_REG_SCRATCH_DATA0, next->pgd); #endif diff --git a/arch/arc/include/asm/pgtable.h b/arch/arc/include/asm/pgtable.h index 7addd0301c51..ea14a8bfc691 100644 --- a/arch/arc/include/asm/pgtable.h +++ b/arch/arc/include/asm/pgtable.h @@ -351,7 +351,7 @@ static inline void set_pte_at(struct mm_struct *mm, unsigned long addr, * Thus use this macro only when you are certain that "current" is current * e.g. when dealing with signal frame setup code etc */ -#ifndef CONFIG_SMP +#ifdef ARC_USE_SCRATCH_REG #define pgd_offset_fast(mm, addr) \ ({ \ pgd_t *pgd_base = (pgd_t *) read_aux_reg(ARC_REG_SCRATCH_DATA0); \ diff --git a/arch/arc/mm/tlb.c b/arch/arc/mm/tlb.c index 10025e199353..417f05ac4397 100644 --- a/arch/arc/mm/tlb.c +++ b/arch/arc/mm/tlb.c @@ -868,7 +868,7 @@ void arc_mmu_init(void) write_aux_reg(ARC_REG_PID, MMU_ENABLE); /* In smp we use this reg for interrupt 1 scratch */ -#ifndef CONFIG_SMP +#ifdef ARC_USE_SCRATCH_REG /* swapper_pg_dir is the pgd for the kernel, used by vmalloc */ write_aux_reg(ARC_REG_SCRATCH_DATA0, swapper_pg_dir); #endif diff --git a/arch/arc/mm/tlbex.S b/arch/arc/mm/tlbex.S index c55d95dd2f39..d6fbdeda400a 100644 --- a/arch/arc/mm/tlbex.S +++ b/arch/arc/mm/tlbex.S @@ -193,7 +193,7 @@ ex_saved_reg1: lr r2, [efa] -#ifndef CONFIG_SMP +#ifdef ARC_USE_SCRATCH_REG lr r1, [ARC_REG_SCRATCH_DATA0] ; current pgd #else GET_CURR_TASK_ON_CPU r1 -- cgit v1.2.3 From 0fb1f35ed9cc2115a88cc73a02e56d288bf2aa8f Mon Sep 17 00:00:00 2001 From: Vineet Gupta Date: Wed, 11 Feb 2015 18:37:43 +0530 Subject: ARCv2: mm: TLB Miss optim: Use double world load/stores LDD/STD Signed-off-by: Vineet Gupta --- arch/arc/mm/tlbex.S | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'arch/arc') diff --git a/arch/arc/mm/tlbex.S b/arch/arc/mm/tlbex.S index d6fbdeda400a..110c72536e8b 100644 --- a/arch/arc/mm/tlbex.S +++ b/arch/arc/mm/tlbex.S @@ -122,17 +122,27 @@ ex_saved_reg1: #else /* ARCv2 */ .macro TLBMISS_FREEUP_REGS +#ifdef CONFIG_ARC_HAS_LL64 + std r0, [sp, -16] + std r2, [sp, -8] +#else PUSH r0 PUSH r1 PUSH r2 PUSH r3 +#endif .endm .macro TLBMISS_RESTORE_REGS +#ifdef CONFIG_ARC_HAS_LL64 + ldd r0, [sp, -16] + ldd r2, [sp, -8] +#else POP r3 POP r2 POP r1 POP r0 +#endif .endm #endif -- cgit v1.2.3 From f4e2f7cc6999943e0a649cbc4618428181aad58f Mon Sep 17 00:00:00 2001 From: Vineet Gupta Date: Thu, 29 Oct 2015 15:47:57 +0530 Subject: ARC: mm: TLB Miss optim: avoid re-reading ECR For setting PTE Dirty bit, reuse the prior test for ST miss. No need to reload ECR and test for ST cause code as the prev condition code is still valid (uncloberred) Signed-off-by: Vineet Gupta --- arch/arc/mm/tlbex.S | 2 -- 1 file changed, 2 deletions(-) (limited to 'arch/arc') diff --git a/arch/arc/mm/tlbex.S b/arch/arc/mm/tlbex.S index 110c72536e8b..4c88148d4cd1 100644 --- a/arch/arc/mm/tlbex.S +++ b/arch/arc/mm/tlbex.S @@ -380,9 +380,7 @@ ENTRY(EV_TLBMissD) ;---------------------------------------------------------------- ; UPDATE_PTE: Let Linux VM know that page was accessed/dirty - lr r3, [ecr] or r0, r0, _PAGE_ACCESSED ; Accessed bit always - btst_s r3, ECR_C_BIT_DTLB_ST_MISS ; See if it was a Write Access ? or.nz r0, r0, _PAGE_DIRTY ; if Write, set Dirty bit as well st_s r0, [r1] ; Write back PTE -- cgit v1.2.3 From ad4c40e937f6d6a08a579c4a78206039618426b7 Mon Sep 17 00:00:00 2001 From: Vineet Gupta Date: Tue, 17 Nov 2015 10:10:29 +0530 Subject: ARC: mm: tlb flush optim: Make TLBWriteNI fallback to TLBWrite if not available TLBWriteNI was introduced in MMUv2 (to not invalidate uTLBs in Fast Path TLB Refill Handler). To avoid #ifdef'ery make it fallback to TLBWrite availabel on all MMUs. This will also help with next change Signed-off-by: Vineet Gupta --- arch/arc/include/asm/mmu.h | 2 ++ arch/arc/mm/tlbex.S | 4 ---- 2 files changed, 2 insertions(+), 4 deletions(-) (limited to 'arch/arc') diff --git a/arch/arc/include/asm/mmu.h b/arch/arc/include/asm/mmu.h index 0abacb82a72b..26b731d32a2b 100644 --- a/arch/arc/include/asm/mmu.h +++ b/arch/arc/include/asm/mmu.h @@ -67,6 +67,8 @@ #if (CONFIG_ARC_MMU_VER >= 2) #define TLBWriteNI 0x5 /* write JTLB without inv uTLBs */ #define TLBIVUTLB 0x6 /* explicitly inv uTLBs */ +#else +#define TLBWriteNI TLBWrite /* Not present in hardware, fallback */ #endif #if (CONFIG_ARC_MMU_VER >= 4) diff --git a/arch/arc/mm/tlbex.S b/arch/arc/mm/tlbex.S index 4c88148d4cd1..2efaf6ca0c06 100644 --- a/arch/arc/mm/tlbex.S +++ b/arch/arc/mm/tlbex.S @@ -292,11 +292,7 @@ ex_saved_reg1: sr TLBGetIndex, [ARC_REG_TLBCOMMAND] /* Commit the Write */ -#if (CONFIG_ARC_MMU_VER >= 2) /* introduced in v2 */ sr TLBWriteNI, [ARC_REG_TLBCOMMAND] -#else - sr TLBWrite, [ARC_REG_TLBCOMMAND] -#endif #else sr TLBInsertEntry, [ARC_REG_TLBCOMMAND] -- cgit v1.2.3 From 1355ea2e603d76af6b1381873e37b1aec22a18a0 Mon Sep 17 00:00:00 2001 From: Vineet Gupta Date: Sat, 17 Oct 2015 16:54:14 +0530 Subject: ARC: mm: tlb flush optim: elide repeated uTLB invalidate in loop The unconditional full TLB flush (on say ASID rollover) iterates over each entry and uses TLBWrite to zero it out. TLBWrite by design also invalidates the uTLBs thus we end up invalidating it as many times as numbe rof entries (512 or 1k) Optimize this by using a weaker TLBWriteNI cmd in loop, which doesn't tinker with uTLBs and an explicit one time IVUTLB, outside the loop to invalidate them all once. And given the optimiztion, the IVUTLB is now needed on MMUv4 too where the uTLBs and JTLBs are otherwise coherent given the TLBInsertEntry / TLBDeleteEntry commands Signed-off-by: Vineet Gupta --- arch/arc/mm/tlb.c | 74 ++++++++++++++++++++++--------------------------------- 1 file changed, 29 insertions(+), 45 deletions(-) (limited to 'arch/arc') diff --git a/arch/arc/mm/tlb.c b/arch/arc/mm/tlb.c index 417f05ac4397..210d807983dd 100644 --- a/arch/arc/mm/tlb.c +++ b/arch/arc/mm/tlb.c @@ -118,6 +118,33 @@ static inline void __tlb_entry_erase(void) write_aux_reg(ARC_REG_TLBCOMMAND, TLBWrite); } +static void utlb_invalidate(void) +{ +#if (CONFIG_ARC_MMU_VER >= 2) + +#if (CONFIG_ARC_MMU_VER == 2) + /* MMU v2 introduced the uTLB Flush command. + * There was however an obscure hardware bug, where uTLB flush would + * fail when a prior probe for J-TLB (both totally unrelated) would + * return lkup err - because the entry didn't exist in MMU. + * The Workround was to set Index reg with some valid value, prior to + * flush. This was fixed in MMU v3 + */ + unsigned int idx; + + /* make sure INDEX Reg is valid */ + idx = read_aux_reg(ARC_REG_TLBINDEX); + + /* If not write some dummy val */ + if (unlikely(idx & TLB_LKUP_ERR)) + write_aux_reg(ARC_REG_TLBINDEX, 0xa); +#endif + + write_aux_reg(ARC_REG_TLBCOMMAND, TLBIVUTLB); +#endif + +} + #if (CONFIG_ARC_MMU_VER < 4) static inline unsigned int tlb_entry_lkup(unsigned long vaddr_n_asid) @@ -149,44 +176,6 @@ static void tlb_entry_erase(unsigned int vaddr_n_asid) } } -/**************************************************************************** - * ARC700 MMU caches recently used J-TLB entries (RAM) as uTLBs (FLOPs) - * - * New IVUTLB cmd in MMU v2 explictly invalidates the uTLB - * - * utlb_invalidate ( ) - * -For v2 MMU calls Flush uTLB Cmd - * -For v1 MMU does nothing (except for Metal Fix v1 MMU) - * This is because in v1 TLBWrite itself invalidate uTLBs - ***************************************************************************/ - -static void utlb_invalidate(void) -{ -#if (CONFIG_ARC_MMU_VER >= 2) - -#if (CONFIG_ARC_MMU_VER == 2) - /* MMU v2 introduced the uTLB Flush command. - * There was however an obscure hardware bug, where uTLB flush would - * fail when a prior probe for J-TLB (both totally unrelated) would - * return lkup err - because the entry didn't exist in MMU. - * The Workround was to set Index reg with some valid value, prior to - * flush. This was fixed in MMU v3 hence not needed any more - */ - unsigned int idx; - - /* make sure INDEX Reg is valid */ - idx = read_aux_reg(ARC_REG_TLBINDEX); - - /* If not write some dummy val */ - if (unlikely(idx & TLB_LKUP_ERR)) - write_aux_reg(ARC_REG_TLBINDEX, 0xa); -#endif - - write_aux_reg(ARC_REG_TLBCOMMAND, TLBIVUTLB); -#endif - -} - static void tlb_entry_insert(unsigned int pd0, pte_t pd1) { unsigned int idx; @@ -219,11 +208,6 @@ static void tlb_entry_insert(unsigned int pd0, pte_t pd1) #else /* CONFIG_ARC_MMU_VER >= 4) */ -static void utlb_invalidate(void) -{ - /* No need since uTLB is always in sync with JTLB */ -} - static void tlb_entry_erase(unsigned int vaddr_n_asid) { write_aux_reg(ARC_REG_TLBPD0, vaddr_n_asid | _PAGE_PRESENT); @@ -267,7 +251,7 @@ noinline void local_flush_tlb_all(void) for (entry = 0; entry < num_tlb; entry++) { /* write this entry to the TLB */ write_aux_reg(ARC_REG_TLBINDEX, entry); - write_aux_reg(ARC_REG_TLBCOMMAND, TLBWrite); + write_aux_reg(ARC_REG_TLBCOMMAND, TLBWriteNI); } if (IS_ENABLED(CONFIG_TRANSPARENT_HUGEPAGE)) { @@ -278,7 +262,7 @@ noinline void local_flush_tlb_all(void) for (entry = stlb_idx; entry < stlb_idx + 16; entry++) { write_aux_reg(ARC_REG_TLBINDEX, entry); - write_aux_reg(ARC_REG_TLBCOMMAND, TLBWrite); + write_aux_reg(ARC_REG_TLBCOMMAND, TLBWriteNI); } } -- cgit v1.2.3 From 2f4ecf68a048de44d72157d637bf9cbbbdb357b0 Mon Sep 17 00:00:00 2001 From: Vineet Gupta Date: Tue, 10 Sep 2019 15:38:10 -0700 Subject: ARC: mm: tlb flush optim: elide redundant uTLB invalidates for MMUv3 For MMUv3 (and prior) the flush_tlb_{range,mm,page} API use the MMU TLBWrite cmd which already nukes the entire uTLB, so NO need for additional IVUTLB cmd from utlb_invalidate() - hence this patch local_flush_tlb_all() is special since it uses a weaker TLBWriteNI cmd (prec commit) to shoot down JTLB, hence we retain the explicit uTLB flush Signed-off-by: Vineet Gupta --- arch/arc/mm/tlb.c | 5 ----- 1 file changed, 5 deletions(-) (limited to 'arch/arc') diff --git a/arch/arc/mm/tlb.c b/arch/arc/mm/tlb.c index 210d807983dd..c340acd989a0 100644 --- a/arch/arc/mm/tlb.c +++ b/arch/arc/mm/tlb.c @@ -339,8 +339,6 @@ void local_flush_tlb_range(struct vm_area_struct *vma, unsigned long start, } } - utlb_invalidate(); - local_irq_restore(flags); } @@ -369,8 +367,6 @@ void local_flush_tlb_kernel_range(unsigned long start, unsigned long end) start += PAGE_SIZE; } - utlb_invalidate(); - local_irq_restore(flags); } @@ -391,7 +387,6 @@ void local_flush_tlb_page(struct vm_area_struct *vma, unsigned long page) if (asid_mm(vma->vm_mm, cpu) != MM_CTXT_NO_ASID) { tlb_entry_erase((page & PAGE_MASK) | hw_pid(vma->vm_mm, cpu)); - utlb_invalidate(); } local_irq_restore(flags); -- cgit v1.2.3 From f091d5a426447cc427680bdd3adc7773aa2867df Mon Sep 17 00:00:00 2001 From: Eugeniy Paltsev Date: Fri, 8 Nov 2019 19:20:22 +0300 Subject: ARC: ARCv2: jump label: implement jump label patching Implement jump label patching for ARC. Jump labels provide an interface to generate dynamic branches using self-modifying code. This allows us to implement conditional branches where changing branch direction is expensive but branch selection is basically 'free' This implementation uses 32-bit NOP and BRANCH instructions which forced to be aligned by 4 to guarantee that they don't cross L1 cache line boundary and can be update atomically. Signed-off-by: Eugeniy Paltsev Signed-off-by: Vineet Gupta --- arch/arc/Kconfig | 8 ++ arch/arc/include/asm/cache.h | 2 + arch/arc/include/asm/jump_label.h | 72 ++++++++++++++++ arch/arc/kernel/Makefile | 1 + arch/arc/kernel/jump_label.c | 170 ++++++++++++++++++++++++++++++++++++++ 5 files changed, 253 insertions(+) create mode 100644 arch/arc/include/asm/jump_label.h create mode 100644 arch/arc/kernel/jump_label.c (limited to 'arch/arc') diff --git a/arch/arc/Kconfig b/arch/arc/Kconfig index 8383155c8c82..375f9d278139 100644 --- a/arch/arc/Kconfig +++ b/arch/arc/Kconfig @@ -46,6 +46,7 @@ config ARC select OF_EARLY_FLATTREE select PCI_SYSCALL if PCI select PERF_USE_VMALLOC if ARC_CACHE_VIPT_ALIASING + select HAVE_ARCH_JUMP_LABEL if ISA_ARCV2 && !CPU_ENDIAN_BE32 config ARCH_HAS_CACHE_LINE_SIZE def_bool y @@ -525,6 +526,13 @@ config ARC_DW2_UNWIND config ARC_DBG_TLB_PARANOIA bool "Paranoia Checks in Low Level TLB Handlers" +config ARC_DBG_JUMP_LABEL + bool "Paranoid checks in Static Keys (jump labels) code" + depends on JUMP_LABEL + default y if STATIC_KEYS_SELFTEST + help + Enable paranoid checks and self-test of both ARC-specific and generic + part of static keys (jump labels) related code. endif config ARC_BUILTIN_DTB_NAME diff --git a/arch/arc/include/asm/cache.h b/arch/arc/include/asm/cache.h index 918804c7c1a4..d8ece4292388 100644 --- a/arch/arc/include/asm/cache.h +++ b/arch/arc/include/asm/cache.h @@ -25,6 +25,8 @@ #ifndef __ASSEMBLY__ +#include + /* Uncached access macros */ #define arc_read_uncached_32(ptr) \ ({ \ diff --git a/arch/arc/include/asm/jump_label.h b/arch/arc/include/asm/jump_label.h new file mode 100644 index 000000000000..9d9618079739 --- /dev/null +++ b/arch/arc/include/asm/jump_label.h @@ -0,0 +1,72 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _ASM_ARC_JUMP_LABEL_H +#define _ASM_ARC_JUMP_LABEL_H + +#ifndef __ASSEMBLY__ + +#include +#include + +#define JUMP_LABEL_NOP_SIZE 4 + +/* + * NOTE about '.balign 4': + * + * To make atomic update of patched instruction available we need to guarantee + * that this instruction doesn't cross L1 cache line boundary. + * + * As of today we simply align instruction which can be patched by 4 byte using + * ".balign 4" directive. In that case patched instruction is aligned with one + * 16-bit NOP_S if this is required. + * However 'align by 4' directive is much stricter than it actually required. + * It's enough that our 32-bit instruction don't cross L1 cache line boundary / + * L1 I$ fetch block boundary which can be achieved by using + * ".bundle_align_mode" assembler directive. That will save us from adding + * useless NOP_S padding in most of the cases. + * + * TODO: switch to ".bundle_align_mode" directive using whin it will be + * supported by ARC toolchain. + */ + +static __always_inline bool arch_static_branch(struct static_key *key, + bool branch) +{ + asm_volatile_goto(".balign "__stringify(JUMP_LABEL_NOP_SIZE)" \n" + "1: \n" + "nop \n" + ".pushsection __jump_table, \"aw\" \n" + ".word 1b, %l[l_yes], %c0 \n" + ".popsection \n" + : : "i" (&((char *)key)[branch]) : : l_yes); + + return false; +l_yes: + return true; +} + +static __always_inline bool arch_static_branch_jump(struct static_key *key, + bool branch) +{ + asm_volatile_goto(".balign "__stringify(JUMP_LABEL_NOP_SIZE)" \n" + "1: \n" + "b %l[l_yes] \n" + ".pushsection __jump_table, \"aw\" \n" + ".word 1b, %l[l_yes], %c0 \n" + ".popsection \n" + : : "i" (&((char *)key)[branch]) : : l_yes); + + return false; +l_yes: + return true; +} + +typedef u32 jump_label_t; + +struct jump_entry { + jump_label_t code; + jump_label_t target; + jump_label_t key; +}; + +#endif /* __ASSEMBLY__ */ +#endif diff --git a/arch/arc/kernel/Makefile b/arch/arc/kernel/Makefile index de6251132310..e784f5396dda 100644 --- a/arch/arc/kernel/Makefile +++ b/arch/arc/kernel/Makefile @@ -20,6 +20,7 @@ obj-$(CONFIG_ARC_EMUL_UNALIGNED) += unaligned.o obj-$(CONFIG_KGDB) += kgdb.o obj-$(CONFIG_ARC_METAWARE_HLINK) += arc_hostlink.o obj-$(CONFIG_PERF_EVENTS) += perf_event.o +obj-$(CONFIG_JUMP_LABEL) += jump_label.o obj-$(CONFIG_ARC_FPU_SAVE_RESTORE) += fpu.o CFLAGS_fpu.o += -mdpfp diff --git a/arch/arc/kernel/jump_label.c b/arch/arc/kernel/jump_label.c new file mode 100644 index 000000000000..b8600dc325b5 --- /dev/null +++ b/arch/arc/kernel/jump_label.c @@ -0,0 +1,170 @@ +// SPDX-License-Identifier: GPL-2.0 + +#include +#include + +#include "asm/cacheflush.h" + +#define JUMPLABEL_ERR "ARC: jump_label: ERROR: " + +/* Halt system on fatal error to make debug easier */ +#define arc_jl_fatal(format...) \ +({ \ + pr_err(JUMPLABEL_ERR format); \ + BUG(); \ +}) + +static inline u32 arc_gen_nop(void) +{ + /* 1x 32bit NOP in middle endian */ + return 0x7000264a; +} + +/* + * Atomic update of patched instruction is only available if this + * instruction doesn't cross L1 cache line boundary. You can read about + * the way we achieve this in arc/include/asm/jump_label.h + */ +static inline void instruction_align_assert(void *addr, int len) +{ + unsigned long a = (unsigned long)addr; + + if ((a >> L1_CACHE_SHIFT) != ((a + len - 1) >> L1_CACHE_SHIFT)) + arc_jl_fatal("instruction (addr %px) cross L1 cache line border", + addr); +} + +/* + * ARCv2 'Branch unconditionally' instruction: + * 00000ssssssssss1SSSSSSSSSSNRtttt + * s S[n:0] lower bits signed immediate (number is bitfield size) + * S S[m:n+1] upper bits signed immediate (number is bitfield size) + * t S[24:21] upper bits signed immediate (branch unconditionally far) + * N N <.d> delay slot mode + * R R Reserved + */ +static inline u32 arc_gen_branch(jump_label_t pc, jump_label_t target) +{ + u32 instruction_l, instruction_r; + u32 pcl = pc & GENMASK(31, 2); + u32 u_offset = target - pcl; + u32 s, S, t; + + /* + * Offset in 32-bit branch instruction must to fit into s25. + * Something is terribly broken if we get such huge offset within one + * function. + */ + if ((s32)u_offset < -16777216 || (s32)u_offset > 16777214) + arc_jl_fatal("gen branch with offset (%d) not fit in s25", + (s32)u_offset); + + /* + * All instructions are aligned by 2 bytes so we should never get offset + * here which is not 2 bytes aligned. + */ + if (u_offset & 0x1) + arc_jl_fatal("gen branch with offset (%d) unaligned to 2 bytes", + (s32)u_offset); + + s = (u_offset >> 1) & GENMASK(9, 0); + S = (u_offset >> 11) & GENMASK(9, 0); + t = (u_offset >> 21) & GENMASK(3, 0); + + /* 00000ssssssssss1 */ + instruction_l = (s << 1) | 0x1; + /* SSSSSSSSSSNRtttt */ + instruction_r = (S << 6) | t; + + return (instruction_r << 16) | (instruction_l & GENMASK(15, 0)); +} + +void arch_jump_label_transform(struct jump_entry *entry, + enum jump_label_type type) +{ + jump_label_t *instr_addr = (jump_label_t *)entry->code; + u32 instr; + + instruction_align_assert(instr_addr, JUMP_LABEL_NOP_SIZE); + + if (type == JUMP_LABEL_JMP) + instr = arc_gen_branch(entry->code, entry->target); + else + instr = arc_gen_nop(); + + WRITE_ONCE(*instr_addr, instr); + flush_icache_range(entry->code, entry->code + JUMP_LABEL_NOP_SIZE); +} + +void arch_jump_label_transform_static(struct jump_entry *entry, + enum jump_label_type type) +{ + /* + * We use only one NOP type (1x, 4 byte) in arch_static_branch, so + * there's no need to patch an identical NOP over the top of it here. + * The generic code calls 'arch_jump_label_transform' if the NOP needs + * to be replaced by a branch, so 'arch_jump_label_transform_static' is + * never called with type other than JUMP_LABEL_NOP. + */ + BUG_ON(type != JUMP_LABEL_NOP); +} + +#ifdef CONFIG_ARC_DBG_JUMP_LABEL +#define SELFTEST_MSG "ARC: instruction generation self-test: " + +struct arc_gen_branch_testdata { + jump_label_t pc; + jump_label_t target_address; + u32 expected_instr; +}; + +static __init int branch_gen_test(const struct arc_gen_branch_testdata *test) +{ + u32 instr_got; + + instr_got = arc_gen_branch(test->pc, test->target_address); + if (instr_got == test->expected_instr) + return 0; + + pr_err(SELFTEST_MSG "FAIL:\n arc_gen_branch(0x%08x, 0x%08x) != 0x%08x, got 0x%08x\n", + test->pc, test->target_address, + test->expected_instr, instr_got); + + return -EFAULT; +} + +/* + * Offset field in branch instruction is not continuous. Test all + * available offset field and sign combinations. Test data is generated + * from real working code. + */ +static const struct arc_gen_branch_testdata arcgenbr_test_data[] __initconst = { + {0x90007548, 0x90007514, 0xffcf07cd}, /* tiny (-52) offs */ + {0x9000c9c0, 0x9000c782, 0xffcf05c3}, /* tiny (-574) offs */ + {0x9000cc1c, 0x9000c782, 0xffcf0367}, /* tiny (-1178) offs */ + {0x9009dce0, 0x9009d106, 0xff8f0427}, /* small (-3034) offs */ + {0x9000f5de, 0x90007d30, 0xfc0f0755}, /* big (-30892) offs */ + {0x900a2444, 0x90035f64, 0xc9cf0321}, /* huge (-443616) offs */ + {0x90007514, 0x9000752c, 0x00000019}, /* tiny (+24) offs */ + {0x9001a578, 0x9001a77a, 0x00000203}, /* tiny (+514) offs */ + {0x90031ed8, 0x90032634, 0x0000075d}, /* tiny (+1884) offs */ + {0x9008c7f2, 0x9008d3f0, 0x00400401}, /* small (+3072) offs */ + {0x9000bb38, 0x9003b340, 0x17c00009}, /* big (+194568) offs */ + {0x90008f44, 0x90578d80, 0xb7c2063d} /* huge (+5701180) offs */ +}; + +static __init int instr_gen_test(void) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(arcgenbr_test_data); i++) + if (branch_gen_test(&arcgenbr_test_data[i])) + return -EFAULT; + + pr_info(SELFTEST_MSG "OK\n"); + + return 0; +} +early_initcall(instr_gen_test); + +#endif /* CONFIG_ARC_DBG_JUMP_LABEL */ -- cgit v1.2.3 From 93c53f2397fb584963a53fe32288384adcdd5f6c Mon Sep 17 00:00:00 2001 From: Eugeniy Paltsev Date: Tue, 19 Nov 2019 16:22:14 +0300 Subject: ARC: [plat-axs10x]: use pgu pll instead of fixed clock Use PLL driver instead of fixed-clock for PGU pixel clock. That allows us to support wider range of graphic modes. Signed-off-by: Eugeniy Paltsev Signed-off-by: Vineet Gupta --- arch/arc/boot/dts/axc001.dtsi | 6 ++++++ arch/arc/boot/dts/axs10x_mb.dtsi | 11 ++++++----- 2 files changed, 12 insertions(+), 5 deletions(-) (limited to 'arch/arc') diff --git a/arch/arc/boot/dts/axc001.dtsi b/arch/arc/boot/dts/axc001.dtsi index 6ec1fcdfc0d7..79ec27c043c1 100644 --- a/arch/arc/boot/dts/axc001.dtsi +++ b/arch/arc/boot/dts/axc001.dtsi @@ -28,6 +28,12 @@ clock-frequency = <750000000>; }; + input_clk: input-clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <33333333>; + }; + core_intc: arc700-intc@cpu { compatible = "snps,arc700-intc"; interrupt-controller; diff --git a/arch/arc/boot/dts/axs10x_mb.dtsi b/arch/arc/boot/dts/axs10x_mb.dtsi index 08bcfed6b80f..f9a5c9ddcae7 100644 --- a/arch/arc/boot/dts/axs10x_mb.dtsi +++ b/arch/arc/boot/dts/axs10x_mb.dtsi @@ -61,12 +61,13 @@ clock-frequency = <25000000>; #clock-cells = <0>; }; + }; - pguclk: pguclk { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <74250000>; - }; + pguclk: pguclk@10080 { + compatible = "snps,axs10x-pgu-pll-clock"; + reg = <0x10080 0x10>, <0x110 0x10>; + #clock-cells = <0>; + clocks = <&input_clk>; }; gmac: ethernet@18000 { -- cgit v1.2.3 From e1b2743d705205314cda550c97f59ed7ce9917f4 Mon Sep 17 00:00:00 2001 From: Eugeniy Paltsev Date: Tue, 19 Nov 2019 16:22:15 +0300 Subject: ARC: [plat-axs10x]: remove hardcoded video mode from bootargs Now have pixel clock PLL driver and we can change pixel clock rate so we don't need to enforce one exact video mode. Moreover enforcing video mode is harmful in case of we enforce mode which isn't supported by the monitor we are using. Signed-off-by: Eugeniy Paltsev Signed-off-by: Vineet Gupta --- arch/arc/boot/dts/axs101.dts | 2 +- arch/arc/boot/dts/axs103_idu.dts | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'arch/arc') diff --git a/arch/arc/boot/dts/axs101.dts b/arch/arc/boot/dts/axs101.dts index 305a7f9658e0..c4cfc5f4f427 100644 --- a/arch/arc/boot/dts/axs101.dts +++ b/arch/arc/boot/dts/axs101.dts @@ -14,6 +14,6 @@ compatible = "snps,axs101", "snps,arc-sdp"; chosen { - bootargs = "earlycon=uart8250,mmio32,0xe0022000,115200n8 console=tty0 console=ttyS3,115200n8 consoleblank=0 video=1280x720@60 print-fatal-signals=1"; + bootargs = "earlycon=uart8250,mmio32,0xe0022000,115200n8 console=tty0 console=ttyS3,115200n8 consoleblank=0 print-fatal-signals=1"; }; }; diff --git a/arch/arc/boot/dts/axs103_idu.dts b/arch/arc/boot/dts/axs103_idu.dts index 46c9136cbf2b..a934b92a8c30 100644 --- a/arch/arc/boot/dts/axs103_idu.dts +++ b/arch/arc/boot/dts/axs103_idu.dts @@ -17,6 +17,6 @@ compatible = "snps,axs103", "snps,arc-sdp"; chosen { - bootargs = "earlycon=uart8250,mmio32,0xe0022000,115200n8 console=tty0 console=ttyS3,115200n8 print-fatal-signals=1 consoleblank=0 video=1280x720@60"; + bootargs = "earlycon=uart8250,mmio32,0xe0022000,115200n8 console=tty0 console=ttyS3,115200n8 print-fatal-signals=1 consoleblank=0"; }; }; -- cgit v1.2.3 From 9fbea0b7e842890a76acffce9be9e430b9e11194 Mon Sep 17 00:00:00 2001 From: Eugeniy Paltsev Date: Tue, 19 Nov 2019 18:26:15 +0300 Subject: ARC: add kmemleak support kmemleak is used internally for a long time and as there isn't any issue with it we can finally enable it in upstream. Signed-off-by: Eugeniy Paltsev Signed-off-by: Vineet Gupta --- arch/arc/Kconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/arc') diff --git a/arch/arc/Kconfig b/arch/arc/Kconfig index 375f9d278139..a00a1d46cf01 100644 --- a/arch/arc/Kconfig +++ b/arch/arc/Kconfig @@ -30,6 +30,7 @@ config ARC select HAVE_ARCH_KGDB select HAVE_ARCH_TRACEHOOK select HAVE_DEBUG_STACKOVERFLOW + select HAVE_DEBUG_KMEMLEAK select HAVE_FUTEX_CMPXCHG if FUTEX select HAVE_IOREMAP_PROT select HAVE_KERNEL_GZIP -- cgit v1.2.3