From bdc10d57f236b534fb675a4bbefd10017aeb2b26 Mon Sep 17 00:00:00 2001 From: Daniel Baluta Date: Thu, 11 Jun 2015 18:49:33 +0300 Subject: iio: ABI: Clarify proximity output value Current description for proximity measurement is ambiguous. While the first part says that proximity is measured by observing reflectivity, the second part incorrectly infers that reported values should behave like a distance. This is because of AS3935 lightning sensor which uses the proximity API, while not being a true proximity sensor. Note this is marked for stable as it accompanies a fix in ABI usage to the sx9500 driver which would otherwise appear to be correct. Fixes: 614e8842ddf ("iio: ABI: add clarification for proximity") Signed-off-by: Daniel Baluta Cc: Signed-off-by: Jonathan Cameron --- Documentation/ABI/testing/sysfs-bus-iio | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) (limited to 'Documentation') diff --git a/Documentation/ABI/testing/sysfs-bus-iio b/Documentation/ABI/testing/sysfs-bus-iio index 3befcb19f414..1fbdd79d1624 100644 --- a/Documentation/ABI/testing/sysfs-bus-iio +++ b/Documentation/ABI/testing/sysfs-bus-iio @@ -1165,10 +1165,8 @@ Description: object is near the sensor, usually be observing reflectivity of infrared or ultrasound emitted. Often these sensors are unit less and as such conversion - to SI units is not possible. Where it is, the units should - be meters. If such a conversion is not possible, the reported - values should behave in the same way as a distance, i.e. lower - values indicate something is closer to the sensor. + to SI units is not possible. Higher proximity measurements + indicate closer objects, and vice versa. What: /sys/.../iio:deviceX/in_illuminance_input What: /sys/.../iio:deviceX/in_illuminance_raw -- cgit v1.2.3 From d90a45b1e005da3351de795d2ba6d52dc5a28837 Mon Sep 17 00:00:00 2001 From: Jens Kuske Date: Fri, 15 May 2015 18:38:51 +0200 Subject: Documentation: sunxi: Update Allwinner SoC documentation There are some new Allwinner SoCs available, namely A33, A83T and H3. Update the documentation to mention those and the related documents. Signed-off-by: Jens Kuske Signed-off-by: Maxime Ripard --- Documentation/arm/sunxi/README | 18 +++++++++++++++++- 1 file changed, 17 insertions(+), 1 deletion(-) (limited to 'Documentation') diff --git a/Documentation/arm/sunxi/README b/Documentation/arm/sunxi/README index 1fe2d7fd4108..5e38e1582f95 100644 --- a/Documentation/arm/sunxi/README +++ b/Documentation/arm/sunxi/README @@ -36,7 +36,7 @@ SunXi family + User Manual http://dl.linux-sunxi.org/A20/A20%20User%20Manual%202013-03-22.pdf - - Allwinner A23 + - Allwinner A23 (sun8i) + Datasheet http://dl.linux-sunxi.org/A23/A23%20Datasheet%20V1.0%2020130830.pdf + User Manual @@ -55,7 +55,23 @@ SunXi family + User Manual http://dl.linux-sunxi.org/A31/A3x_release_document/A31s/IC/A31s%20User%20Manual%20%20V1.0%2020130322.pdf + - Allwinner A33 (sun8i) + + Datasheet + http://dl.linux-sunxi.org/A33/A33%20Datasheet%20release%201.1.pdf + + User Manual + http://dl.linux-sunxi.org/A33/A33%20user%20manual%20release%201.1.pdf + + - Allwinner H3 (sun8i) + + Datasheet + http://dl.linux-sunxi.org/H3/Allwinner_H3_Datasheet_V1.0.pdf + * Quad ARM Cortex-A15, Quad ARM Cortex-A7 based SoCs - Allwinner A80 + Datasheet http://dl.linux-sunxi.org/A80/A80_Datasheet_Revision_1.0_0404.pdf + + * Octa ARM Cortex-A7 based SoCs + - Allwinner A83T + + Not Supported + + Datasheet + http://dl.linux-sunxi.org/A83T/A83T_datasheet_Revision_1.1.pdf -- cgit v1.2.3 From 14a882df14a5ae859b245bc708ce3fce47a91594 Mon Sep 17 00:00:00 2001 From: Jens Kuske Date: Fri, 15 May 2015 18:38:55 +0200 Subject: ARM: sunxi: Introduce Allwinner H3 support The Allwinner H3 is a quad-core Cortex-A7-based SoC. It is very similar to other sun8i family SoCs like the A23. Signed-off-by: Jens Kuske Signed-off-by: Maxime Ripard --- Documentation/devicetree/bindings/arm/sunxi.txt | 1 + arch/arm/mach-sunxi/Kconfig | 2 +- arch/arm/mach-sunxi/sunxi.c | 4 +++- 3 files changed, 5 insertions(+), 2 deletions(-) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/arm/sunxi.txt b/Documentation/devicetree/bindings/arm/sunxi.txt index 42941fdefb11..3cb4b946ff2b 100644 --- a/Documentation/devicetree/bindings/arm/sunxi.txt +++ b/Documentation/devicetree/bindings/arm/sunxi.txt @@ -9,4 +9,5 @@ using one of the following compatible strings: allwinner,sun6i-a31 allwinner,sun7i-a20 allwinner,sun8i-a23 + allwinner,sun8i-h3 allwinner,sun9i-a80 diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig index 81502b90dd91..4efe2d43a126 100644 --- a/arch/arm/mach-sunxi/Kconfig +++ b/arch/arm/mach-sunxi/Kconfig @@ -35,7 +35,7 @@ config MACH_SUN7I select SUN5I_HSTIMER config MACH_SUN8I - bool "Allwinner A23 (sun8i) SoCs support" + bool "Allwinner sun8i Family SoCs support" default ARCH_SUNXI select ARM_GIC select MFD_SUN6I_PRCM diff --git a/arch/arm/mach-sunxi/sunxi.c b/arch/arm/mach-sunxi/sunxi.c index 1bc811a74a9f..82709020c57c 100644 --- a/arch/arm/mach-sunxi/sunxi.c +++ b/arch/arm/mach-sunxi/sunxi.c @@ -67,10 +67,12 @@ MACHINE_END static const char * const sun8i_board_dt_compat[] = { "allwinner,sun8i-a23", + "allwinner,sun8i-h3", NULL, }; -DT_MACHINE_START(SUN8I_DT, "Allwinner sun8i (A23) Family") +DT_MACHINE_START(SUN8I_DT, "Allwinner sun8i Family") + .init_time = sun6i_timer_init, .dt_compat = sun8i_board_dt_compat, .init_late = sunxi_dt_cpufreq_init, MACHINE_END -- cgit v1.2.3 From 159870d2413c92622790e9cecbce95099bed539a Mon Sep 17 00:00:00 2001 From: Vishnu Patekar Date: Sat, 30 May 2015 16:55:01 +0200 Subject: ARM: sunxi: Add Machine support for A33 Add machine support for the Allwinner A33 quad core cortex-a7 based SoC, which is similar to the A23 SoC. Signed-off-by: Vishnu Patekar Signed-off-by: Hans de Goede Signed-off-by: Maxime Ripard Tested-by: Chen-Yu Tsai --- Documentation/devicetree/bindings/arm/sunxi.txt | 1 + arch/arm/mach-sunxi/sunxi.c | 1 + drivers/clk/sunxi/clk-sunxi.c | 1 + 3 files changed, 3 insertions(+) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/arm/sunxi.txt b/Documentation/devicetree/bindings/arm/sunxi.txt index 3cb4b946ff2b..67da20539540 100644 --- a/Documentation/devicetree/bindings/arm/sunxi.txt +++ b/Documentation/devicetree/bindings/arm/sunxi.txt @@ -9,5 +9,6 @@ using one of the following compatible strings: allwinner,sun6i-a31 allwinner,sun7i-a20 allwinner,sun8i-a23 + allwinner,sun8i-a33 allwinner,sun8i-h3 allwinner,sun9i-a80 diff --git a/arch/arm/mach-sunxi/sunxi.c b/arch/arm/mach-sunxi/sunxi.c index 82709020c57c..65bab2876343 100644 --- a/arch/arm/mach-sunxi/sunxi.c +++ b/arch/arm/mach-sunxi/sunxi.c @@ -67,6 +67,7 @@ MACHINE_END static const char * const sun8i_board_dt_compat[] = { "allwinner,sun8i-a23", + "allwinner,sun8i-a33", "allwinner,sun8i-h3", NULL, }; diff --git a/drivers/clk/sunxi/clk-sunxi.c b/drivers/clk/sunxi/clk-sunxi.c index 7e1e2bd189b6..6d25e4e9dfec 100644 --- a/drivers/clk/sunxi/clk-sunxi.c +++ b/drivers/clk/sunxi/clk-sunxi.c @@ -1389,6 +1389,7 @@ static void __init sun6i_init_clocks(struct device_node *node) CLK_OF_DECLARE(sun6i_a31_clk_init, "allwinner,sun6i-a31", sun6i_init_clocks); CLK_OF_DECLARE(sun6i_a31s_clk_init, "allwinner,sun6i-a31s", sun6i_init_clocks); CLK_OF_DECLARE(sun8i_a23_clk_init, "allwinner,sun8i-a23", sun6i_init_clocks); +CLK_OF_DECLARE(sun8i_a33_clk_init, "allwinner,sun8i-a33", sun6i_init_clocks); static void __init sun9i_init_clocks(struct device_node *node) { -- cgit v1.2.3 From 61754c18752ffb78145671e94f053fb202fff041 Mon Sep 17 00:00:00 2001 From: Michal Marek Date: Wed, 1 Jul 2015 17:19:30 +0200 Subject: kbuild: Allow arch Makefiles to override {cpp,ld,c}flags Since commit a1c48bb1 (Makefile: Fix unrecognized cross-compiler command line options), the arch Makefile is included earlier by the main Makefile, preventing the arc architecture to set its -O3 compiler option. Since there might be more use cases for an arch Makefile to fine-tune the options, add support for ARCH_CPPFLAGS, ARCH_AFLAGS and ARCH_CFLAGS variables that are appended to the respective kbuild variables. The user still has the final say via the KCPPFLAGS, KAFLAGS and KCFLAGS variables. Reported-by: Vineet Gupta Cc: stable@vger.kernel.org # 3.16+ Signed-off-by: Michal Marek --- Documentation/kbuild/makefiles.txt | 8 ++++++++ Makefile | 9 +++++---- 2 files changed, 13 insertions(+), 4 deletions(-) (limited to 'Documentation') diff --git a/Documentation/kbuild/makefiles.txt b/Documentation/kbuild/makefiles.txt index e63b446d973c..13f888a02a3d 100644 --- a/Documentation/kbuild/makefiles.txt +++ b/Documentation/kbuild/makefiles.txt @@ -952,6 +952,14 @@ When kbuild executes, the following steps are followed (roughly): $(KBUILD_ARFLAGS) set by the top level Makefile to "D" (deterministic mode) if this option is supported by $(AR). + ARCH_CPPFLAGS, ARCH_AFLAGS, ARCH_CFLAGS Overrides the kbuild defaults + + These variables are appended to the KBUILD_CPPFLAGS, + KBUILD_AFLAGS, and KBUILD_CFLAGS, respectively, after the + top-level Makefile has set any other flags. This provides a + means for an architecture to override the defaults. + + --- 6.2 Add prerequisites to archheaders: The archheaders: rule is used to generate header files that diff --git a/Makefile b/Makefile index 13270c0a9336..8c31fbc90589 100644 --- a/Makefile +++ b/Makefile @@ -780,10 +780,11 @@ endif include scripts/Makefile.kasan include scripts/Makefile.extrawarn -# Add user supplied CPPFLAGS, AFLAGS and CFLAGS as the last assignments -KBUILD_CPPFLAGS += $(KCPPFLAGS) -KBUILD_AFLAGS += $(KAFLAGS) -KBUILD_CFLAGS += $(KCFLAGS) +# Add any arch overrides and user supplied CPPFLAGS, AFLAGS and CFLAGS as the +# last assignments +KBUILD_CPPFLAGS += $(ARCH_CPPFLAGS) $(KCPPFLAGS) +KBUILD_AFLAGS += $(ARCH_AFLAGS) $(KAFLAGS) +KBUILD_CFLAGS += $(ARCH_CFLAGS) $(KCFLAGS) # Use --build-id when available. LDFLAGS_BUILD_ID = $(patsubst -Wl$(comma)%,%,\ -- cgit v1.2.3 From fff75ee150104fdc29d86a75a5511482a981c27b Mon Sep 17 00:00:00 2001 From: Dave Gerlach Date: Wed, 6 May 2015 12:25:33 -0500 Subject: ARM: dts: am4372: Add emif node Add node for TI AM4372 EMIF. Without this we get a warning with the recent commit fabbe6df (ARM: OMAP: AM43xx hwmod: Add data for am43xx emif hwmod). Signed-off-by: Dave Gerlach Tested-by: Felipe Balbi Acked-by: Felipe Balbi [tony@atomide.com: updated comments] Signed-off-by: Tony Lindgren --- Documentation/devicetree/bindings/memory-controllers/ti/emif.txt | 1 + arch/arm/boot/dts/am4372.dtsi | 6 ++++++ 2 files changed, 7 insertions(+) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/memory-controllers/ti/emif.txt b/Documentation/devicetree/bindings/memory-controllers/ti/emif.txt index 938f8e1ba205..0db60470ebb6 100644 --- a/Documentation/devicetree/bindings/memory-controllers/ti/emif.txt +++ b/Documentation/devicetree/bindings/memory-controllers/ti/emif.txt @@ -8,6 +8,7 @@ of the EMIF IP and memory parts attached to it. Required properties: - compatible : Should be of the form "ti,emif-" where is the IP revision of the specific EMIF instance. + For am437x should be ti,emif-am4372. - phy-type : indicating the DDR phy type. Following are the allowed values diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi index c80a3e233792..9521a3827021 100644 --- a/arch/arm/boot/dts/am4372.dtsi +++ b/arch/arm/boot/dts/am4372.dtsi @@ -132,6 +132,12 @@ }; }; + emif: emif@4c000000 { + compatible = "ti,emif-am4372"; + reg = <0x4c000000 0x1000000>; + ti,hwmods = "emif"; + }; + edma: edma@49000000 { compatible = "ti,edma3"; ti,hwmods = "tpcc", "tptc0", "tptc1", "tptc2"; -- cgit v1.2.3 From b51f9b103f58db2c5c0a20d6cee26c8bc255d3ae Mon Sep 17 00:00:00 2001 From: Uwe Geuder Date: Mon, 29 Jun 2015 23:35:05 +0300 Subject: PM / hibernate: clarify resume documentation it was not the whole truth that kernel mode cannot be used with swap on LVM Signed-off-by: Uwe Geuder Acked-by: Pavel Machek Signed-off-by: Rafael J. Wysocki --- Documentation/power/swsusp.txt | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-) (limited to 'Documentation') diff --git a/Documentation/power/swsusp.txt b/Documentation/power/swsusp.txt index f732a8321e8a..8cc17ca71813 100644 --- a/Documentation/power/swsusp.txt +++ b/Documentation/power/swsusp.txt @@ -410,8 +410,17 @@ Documentation/usb/persist.txt. Q: Can I suspend-to-disk using a swap partition under LVM? -A: No. You can suspend successfully, but you'll not be able to -resume. uswsusp should be able to work with LVM. See suspend.sf.net. +A: Yes and No. You can suspend successfully, but the kernel will not be able +to resume on its own. You need an initramfs that can recognize the resume +situation, activate the logical volume containing the swap volume (but not +touch any filesystems!), and eventually call + +echo -n "$major:$minor" > /sys/power/resume + +where $major and $minor are the respective major and minor device numbers of +the swap volume. + +uswsusp works with LVM, too. See http://suspend.sourceforge.net/ Q: I upgraded the kernel from 2.6.15 to 2.6.16. Both kernels were compiled with the similar configuration files. Anyway I found that -- cgit v1.2.3 From d4acc1651588835b802a2049f4f3a2adcc1af750 Mon Sep 17 00:00:00 2001 From: Graham Whaley Date: Tue, 7 Jul 2015 19:13:37 +0100 Subject: Documentation: drm: Fix tablulation in KMS properties table Commit 712a0dd91c4a ("Documentation/drm: Update rotation property") left an extra 'rowspan' for the row omap, which pushed the following qxl rows columns out to column 8 and broke the tabulation. Remove the errant rowspan. Signed-off-by: Graham Whaley Signed-off-by: Daniel Vetter --- Documentation/DocBook/drm.tmpl | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'Documentation') diff --git a/Documentation/DocBook/drm.tmpl b/Documentation/DocBook/drm.tmpl index c0312cbd023d..2fb9a5457522 100644 --- a/Documentation/DocBook/drm.tmpl +++ b/Documentation/DocBook/drm.tmpl @@ -3383,7 +3383,7 @@ void intel_crt_init(struct drm_device *dev) TBD - omap + omap Generic “zorder” RANGE -- cgit v1.2.3 From 553a59fc8f5d51c3824c0b7d4ca61e780157defa Mon Sep 17 00:00:00 2001 From: Philipp Zabel Date: Tue, 19 May 2015 16:28:12 +0200 Subject: drm/imx: parallel-display: fix drm_panel support The parallel-display driver used an undocumented, non-standard property "fsl,panel" to optionally associate with a drm_panel device. This patch fixes the driver to use the same OF graph bindings as the LDB driver instead: parallel-display { compatible = "fsl,imx-parallel-display"; ... port@1 { reg = <1>; parallel_out: endpoint { remote_endpoint = <&panel_in>; }; }; }; panel { ... port { panel_in: endpoint { remote-endpoint = <¶llel_out>; }; }; }; Signed-off-by: Philipp Zabel Tested-by: Gary Bisson --- .../devicetree/bindings/drm/imx/fsl-imx-drm.txt | 26 ++++++++++++++++++++-- drivers/gpu/drm/imx/parallel-display.c | 21 ++++++++++++----- 2 files changed, 39 insertions(+), 8 deletions(-) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/drm/imx/fsl-imx-drm.txt b/Documentation/devicetree/bindings/drm/imx/fsl-imx-drm.txt index e75f0e549fff..971c3eedb1c7 100644 --- a/Documentation/devicetree/bindings/drm/imx/fsl-imx-drm.txt +++ b/Documentation/devicetree/bindings/drm/imx/fsl-imx-drm.txt @@ -65,8 +65,10 @@ Optional properties: - edid: verbatim EDID data block describing attached display. - ddc: phandle describing the i2c bus handling the display data channel -- port: A port node with endpoint definitions as defined in +- port@[0-1]: Port nodes with endpoint definitions as defined in Documentation/devicetree/bindings/media/video-interfaces.txt. + Port 0 is the input port connected to the IPU display interface, + port 1 is the output port connected to a panel. example: @@ -75,9 +77,29 @@ display@di0 { edid = [edid-data]; interface-pix-fmt = "rgb24"; - port { + port@0 { + reg = <0>; + display_in: endpoint { remote-endpoint = <&ipu_di0_disp0>; }; }; + + port@1 { + reg = <1>; + + display_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; +}; + +panel { + ... + + port { + panel_in: endpoint { + remote-endpoint = <&display_out>; + }; + }; }; diff --git a/drivers/gpu/drm/imx/parallel-display.c b/drivers/gpu/drm/imx/parallel-display.c index 74a9ce40ddc4..b4deb9cf9d71 100644 --- a/drivers/gpu/drm/imx/parallel-display.c +++ b/drivers/gpu/drm/imx/parallel-display.c @@ -21,6 +21,7 @@ #include #include #include