From b54cf35a7f656c61dd695509e8cf8cc7e1dc3e53 Mon Sep 17 00:00:00 2001 From: Jan-Simon Möller Date: Fri, 20 Jul 2012 16:49:06 +0800 Subject: LEDS: add BlinkM RGB LED driver, documentation and update MAINTAINERS MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Add driver for BlinkM device to drivers/leds/. Add entry to MAINTAINERS file. Add documentation in Documentation/leds/. A BlinkM is a RGB LED controlled through I2C. This driver implements an interface to the LED framework and another sysfs group to access the internal options of the BlinkM. rev6: Use module_i2c_driver(). rev5: Removed own workqueue in favor of events wq. rev4: Fixed comments by Bryan Wu. rev3: Fixed issues found by Jonathan Neuschäfer. (bryan.wu@canonical.com: remove 2 trailing whitespace) Signed-off-by: Jan-Simon Möller Signed-off-by: Bryan Wu --- Documentation/leds/leds-blinkm.txt | 80 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 80 insertions(+) create mode 100644 Documentation/leds/leds-blinkm.txt (limited to 'Documentation') diff --git a/Documentation/leds/leds-blinkm.txt b/Documentation/leds/leds-blinkm.txt new file mode 100644 index 000000000000..9dd92f4cf4e1 --- /dev/null +++ b/Documentation/leds/leds-blinkm.txt @@ -0,0 +1,80 @@ +The leds-blinkm driver supports the devices of the BlinkM family. + +They are RGB-LED modules driven by a (AT)tiny microcontroller and +communicate through I2C. The default address of these modules is +0x09 but this can be changed through a command. By this you could +dasy-chain up to 127 BlinkMs on an I2C bus. + +The device accepts RGB and HSB color values through separate commands. +Also you can store blinking sequences as "scripts" in +the controller and run them. Also fading is an option. + +The interface this driver provides is 2-fold: + +a) LED class interface for use with triggers +############################################ + +The registration follows the scheme: +blinkm--- + +$ ls -h /sys/class/leds/blinkm-6-* +/sys/class/leds/blinkm-6-9-blue: +brightness device max_brightness power subsystem trigger uevent + +/sys/class/leds/blinkm-6-9-green: +brightness device max_brightness power subsystem trigger uevent + +/sys/class/leds/blinkm-6-9-red: +brightness device max_brightness power subsystem trigger uevent + +(same is /sys/bus/i2c/devices/6-0009/leds) + +We can control the colors separated into red, green and blue and +assign triggers on each color. + +E.g.: + +$ cat blinkm-6-9-blue/brightness +05 + +$ echo 200 > blinkm-6-9-blue/brightness +$ + +$ modprobe ledtrig-heartbeat +$ echo heartbeat > blinkm-6-9-green/trigger +$ + + +b) Sysfs group to control rgb, fade, hsb, scripts ... +##################################################### + +This extended interface is available as folder blinkm +in the sysfs folder of the I2C device. +E.g. below /sys/bus/i2c/devices/6-0009/blinkm + +$ ls -h /sys/bus/i2c/devices/6-0009/blinkm/ +blue green red test + +Currently supported is just setting red, green, blue +and a test sequence. + +E.g.: + +$ cat * +00 +00 +00 +#Write into test to start test sequence!# + +$ echo 1 > test +$ + +$ echo 255 > red +$ + + + +as of 6/2012 + +dl9pf gmx de + -- cgit v1.2.3