From 5fb7639dee74496107f269a987933e2f0465692c Mon Sep 17 00:00:00 2001 From: Robert Schwebel Date: Wed, 19 Mar 2014 09:49:42 +0100 Subject: can: Documentation: fix parameter name "sample-point" This patch fixes the name of the parameter to configure the sample point used in iproute2's ip command. The correct writing is "sample-point" not "sample_point". Signed-off-by: Robert Schwebel Signed-off-by: Marc Kleine-Budde --- Documentation/networking/can.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'Documentation/networking') diff --git a/Documentation/networking/can.txt b/Documentation/networking/can.txt index 0cbe6ec22d6f..2fa44cbe81b7 100644 --- a/Documentation/networking/can.txt +++ b/Documentation/networking/can.txt @@ -1017,7 +1017,7 @@ solution for a couple of reasons: in case of a bus-off condition after the specified delay time in milliseconds. By default it's off. - "bitrate 125000 sample_point 0.875" + "bitrate 125000 sample-point 0.875" Shows the real bit-rate in bits/sec and the sample-point in the range 0.000..0.999. If the calculation of bit-timing parameters is enabled in the kernel (CONFIG_CAN_CALC_BITTIMING=y), the -- cgit v1.2.3