From b85a3ef4ac65169b65fd2fe9bec7912bbf475ba4 Mon Sep 17 00:00:00 2001 From: John Linn Date: Mon, 20 Jun 2011 11:47:27 -0600 Subject: ARM: Xilinx: Adding Xilinx board support The 1st board support is minimal to get a system up and running on the Xilinx platform. This platform reuses the clock implementation from plat-versatile, and it depends entirely on CONFIG_OF support. There is only one board support file which obtains all device information from a device tree dtb file which is passed to the kernel at boot time. Signed-off-by: John Linn --- Documentation/devicetree/bindings/arm/xilinx.txt | 7 +++++++ 1 file changed, 7 insertions(+) create mode 100644 Documentation/devicetree/bindings/arm/xilinx.txt (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/arm/xilinx.txt b/Documentation/devicetree/bindings/arm/xilinx.txt new file mode 100644 index 000000000000..6f1ed830b4f7 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/xilinx.txt @@ -0,0 +1,7 @@ +Xilinx Zynq EP107 Emulation Platform board + +This board is an emulation platform for the Zynq product which is +based on an ARM Cortex A9 processor. + +Required root node properties: + - compatible = "xlnx,zynq-ep107"; -- cgit v1.2.3 From d364b601163841c24287540ae3548d19a0d2932e Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Mon, 30 May 2011 00:07:29 -0400 Subject: doc: powerpc: drop +x perms on text file Signed-off-by: Mike Frysinger Signed-off-by: Jiri Kosina --- Documentation/devicetree/bindings/net/can/fsl-flexcan.txt | 0 1 file changed, 0 insertions(+), 0 deletions(-) mode change 100755 => 100644 Documentation/devicetree/bindings/net/can/fsl-flexcan.txt (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/net/can/fsl-flexcan.txt b/Documentation/devicetree/bindings/net/can/fsl-flexcan.txt old mode 100755 new mode 100644 -- cgit v1.2.3 From cfee95977bea090ae5ec4fd442ebd381792d46c4 Mon Sep 17 00:00:00 2001 From: Daniel Drake Date: Sat, 25 Jun 2011 17:34:17 +0100 Subject: x86, olpc: Add XO-1 RTC driver Add a driver to configure the XO-1 RTC via CS5536 MSRs, to be used as a system wakeup source via olpc-xo1-pm. Device detection is based on finding the relevant device tree node. Signed-off-by: Daniel Drake Link: http://lkml.kernel.org/r/1309019658-1712-11-git-send-email-dsd@laptop.org Acked-by: Andres Salomon Acked-by: Grant Likely Reviewed-by: Sebastian Andrzej Siewior Cc: devicetree-discuss@lists.ozlabs.org Signed-off-by: H. Peter Anvin --- .../devicetree/bindings/rtc/olpc-xo1-rtc.txt | 5 ++ arch/x86/Kconfig | 7 ++ arch/x86/platform/olpc/Makefile | 1 + arch/x86/platform/olpc/olpc-xo1-rtc.c | 81 ++++++++++++++++++++++ include/linux/cs5535.h | 5 ++ 5 files changed, 99 insertions(+) create mode 100644 Documentation/devicetree/bindings/rtc/olpc-xo1-rtc.txt create mode 100644 arch/x86/platform/olpc/olpc-xo1-rtc.c (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/rtc/olpc-xo1-rtc.txt b/Documentation/devicetree/bindings/rtc/olpc-xo1-rtc.txt new file mode 100644 index 000000000000..a2891ceb6344 --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/olpc-xo1-rtc.txt @@ -0,0 +1,5 @@ +OLPC XO-1 RTC +~~~~~~~~~~~~~ + +Required properties: + - compatible : "olpc,xo1-rtc" diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index a6aefbbc5cbf..0a9d573a2f9d 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -2080,6 +2080,13 @@ config OLPC_XO1_PM ---help--- Add support for poweroff and suspend of the OLPC XO-1 laptop. +config OLPC_XO1_RTC + bool "OLPC XO-1 Real Time Clock" + depends on OLPC_XO1_PM && RTC_DRV_CMOS + ---help--- + Add support for the XO-1 real time clock, which can be used as a + programmable wakeup source. + config OLPC_XO1_SCI bool "OLPC XO-1 SCI extras" depends on OLPC && OLPC_XO1_PM && POWER_SUPPLY diff --git a/arch/x86/platform/olpc/Makefile b/arch/x86/platform/olpc/Makefile index 1ec5ade97f44..8922b9b3cd7a 100644 --- a/arch/x86/platform/olpc/Makefile +++ b/arch/x86/platform/olpc/Makefile @@ -1,3 +1,4 @@ obj-$(CONFIG_OLPC) += olpc.o olpc_ofw.o olpc_dt.o obj-$(CONFIG_OLPC_XO1_PM) += olpc-xo1-pm.o xo1-wakeup.o +obj-$(CONFIG_OLPC_XO1_RTC) += olpc-xo1-rtc.o obj-$(CONFIG_OLPC_XO1_SCI) += olpc-xo1-sci.o diff --git a/arch/x86/platform/olpc/olpc-xo1-rtc.c b/arch/x86/platform/olpc/olpc-xo1-rtc.c new file mode 100644 index 000000000000..a2b4efddd61a --- /dev/null +++ b/arch/x86/platform/olpc/olpc-xo1-rtc.c @@ -0,0 +1,81 @@ +/* + * Support for OLPC XO-1 Real Time Clock (RTC) + * + * Copyright (C) 2011 One Laptop per Child + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include +#include +#include +#include + +#include +#include + +static void rtc_wake_on(struct device *dev) +{ + olpc_xo1_pm_wakeup_set(CS5536_PM_RTC); +} + +static void rtc_wake_off(struct device *dev) +{ + olpc_xo1_pm_wakeup_clear(CS5536_PM_RTC); +} + +static struct resource rtc_platform_resource[] = { + [0] = { + .start = RTC_PORT(0), + .end = RTC_PORT(1), + .flags = IORESOURCE_IO, + }, + [1] = { + .start = RTC_IRQ, + .end = RTC_IRQ, + .flags = IORESOURCE_IRQ, + } +}; + +static struct cmos_rtc_board_info rtc_info = { + .rtc_day_alarm = 0, + .rtc_mon_alarm = 0, + .rtc_century = 0, + .wake_on = rtc_wake_on, + .wake_off = rtc_wake_off, +}; + +static struct platform_device xo1_rtc_device = { + .name = "rtc_cmos", + .id = -1, + .num_resources = ARRAY_SIZE(rtc_platform_resource), + .dev.platform_data = &rtc_info, + .resource = rtc_platform_resource, +}; + +static int __init xo1_rtc_init(void) +{ + int r; + struct device_node *node; + + node = of_find_compatible_node(NULL, NULL, "olpc,xo1-rtc"); + if (!node) + return 0; + of_node_put(node); + + pr_info("olpc-xo1-rtc: Initializing OLPC XO-1 RTC\n"); + rdmsrl(MSR_RTC_DOMA_OFFSET, rtc_info.rtc_day_alarm); + rdmsrl(MSR_RTC_MONA_OFFSET, rtc_info.rtc_mon_alarm); + rdmsrl(MSR_RTC_CEN_OFFSET, rtc_info.rtc_century); + + r = platform_device_register(&xo1_rtc_device); + if (r) + return r; + + device_init_wakeup(&xo1_rtc_device.dev, 1); + return 0; +} +arch_initcall(xo1_rtc_init); diff --git a/include/linux/cs5535.h b/include/linux/cs5535.h index 72954c6bf5d6..c077aec3a6ff 100644 --- a/include/linux/cs5535.h +++ b/include/linux/cs5535.h @@ -40,6 +40,10 @@ #define MSR_MFGPT_NR 0x51400029 #define MSR_MFGPT_SETUP 0x5140002B +#define MSR_RTC_DOMA_OFFSET 0x51400055 +#define MSR_RTC_MONA_OFFSET 0x51400056 +#define MSR_RTC_CEN_OFFSET 0x51400057 + #define MSR_LX_SPARE_MSR 0x80000011 /* DC-specific */ #define MSR_GX_GLD_MSR_CONFIG 0xC0002001 @@ -95,6 +99,7 @@ static inline int cs5535_pic_unreqz_select_high(unsigned int group, /* CS5536_PM1_EN bits */ #define CS5536_PM_PWRBTN (1 << 8) +#define CS5536_PM_RTC (1 << 10) /* CS5536_PM_GPE0_STS bits */ #define CS5536_GPIOM7_PME_FLAG (1 << 31) -- cgit v1.2.3 From 02c981c07bc95ac1e42ec6c817f0c28cf3fe993a Mon Sep 17 00:00:00 2001 From: Binghua Duan Date: Fri, 8 Jul 2011 17:40:12 +0800 Subject: ARM: CSR: Adding CSR SiRFprimaII board support MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit SiRFprimaII is the latest generation application processor from CSR’s Multifunction SoC product family. Designed around an ARM cortex A9 core, high-speed memory bus, advanced 3D accelerator and full-HD multi-format video decoder, SiRFprimaII is able to meet the needs of complicated applications for modern multifunction devices that require heavy concurrent applications and fluid user experience. Integrated with GPS baseband, analog and PMU, this new platform is designed to provide a cost effective solution for Automotive and Consumer markets. This patch adds the basic support for this SoC and EVB board based on device tree. It is following the ZYNQ of Xilinx in some degree. Signed-off-by: Binghua Duan Signed-off-by: Rongjun Ying Signed-off-by: Zhiwu Song Signed-off-by: Yuping Luo Signed-off-by: Bin Shi Signed-off-by: Huayi Li Signed-off-by: Barry Song Reviewed-by: Arnd Bergmann --- Documentation/devicetree/bindings/arm/sirf.txt | 3 + arch/arm/Kconfig | 14 + arch/arm/Makefile | 1 + arch/arm/boot/dts/prima2-cb.dts | 416 +++++++++++++++++++ arch/arm/mach-prima2/Makefile | 5 + arch/arm/mach-prima2/Makefile.boot | 3 + arch/arm/mach-prima2/clock.c | 509 ++++++++++++++++++++++++ arch/arm/mach-prima2/common.h | 20 + arch/arm/mach-prima2/include/mach/clkdev.h | 15 + arch/arm/mach-prima2/include/mach/debug-macro.S | 29 ++ arch/arm/mach-prima2/include/mach/entry-macro.S | 29 ++ arch/arm/mach-prima2/include/mach/hardware.h | 15 + arch/arm/mach-prima2/include/mach/io.h | 16 + arch/arm/mach-prima2/include/mach/irqs.h | 17 + arch/arm/mach-prima2/include/mach/map.h | 16 + arch/arm/mach-prima2/include/mach/memory.h | 21 + arch/arm/mach-prima2/include/mach/system.h | 29 ++ arch/arm/mach-prima2/include/mach/timex.h | 14 + arch/arm/mach-prima2/include/mach/uart.h | 23 ++ arch/arm/mach-prima2/include/mach/uncompress.h | 40 ++ arch/arm/mach-prima2/include/mach/vmalloc.h | 16 + arch/arm/mach-prima2/irq.c | 71 ++++ arch/arm/mach-prima2/prima2.c | 40 ++ arch/arm/mach-prima2/rstc.c | 69 ++++ arch/arm/mach-prima2/timer.c | 217 ++++++++++ arch/arm/mm/Kconfig | 2 +- 26 files changed, 1649 insertions(+), 1 deletion(-) create mode 100644 Documentation/devicetree/bindings/arm/sirf.txt create mode 100644 arch/arm/boot/dts/prima2-cb.dts create mode 100644 arch/arm/mach-prima2/Makefile create mode 100644 arch/arm/mach-prima2/Makefile.boot create mode 100644 arch/arm/mach-prima2/clock.c create mode 100644 arch/arm/mach-prima2/common.h create mode 100644 arch/arm/mach-prima2/include/mach/clkdev.h create mode 100644 arch/arm/mach-prima2/include/mach/debug-macro.S create mode 100644 arch/arm/mach-prima2/include/mach/entry-macro.S create mode 100644 arch/arm/mach-prima2/include/mach/hardware.h create mode 100644 arch/arm/mach-prima2/include/mach/io.h create mode 100644 arch/arm/mach-prima2/include/mach/irqs.h create mode 100644 arch/arm/mach-prima2/include/mach/map.h create mode 100644 arch/arm/mach-prima2/include/mach/memory.h create mode 100644 arch/arm/mach-prima2/include/mach/system.h create mode 100644 arch/arm/mach-prima2/include/mach/timex.h create mode 100644 arch/arm/mach-prima2/include/mach/uart.h create mode 100644 arch/arm/mach-prima2/include/mach/uncompress.h create mode 100644 arch/arm/mach-prima2/include/mach/vmalloc.h create mode 100644 arch/arm/mach-prima2/irq.c create mode 100644 arch/arm/mach-prima2/prima2.c create mode 100644 arch/arm/mach-prima2/rstc.c create mode 100644 arch/arm/mach-prima2/timer.c (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/arm/sirf.txt b/Documentation/devicetree/bindings/arm/sirf.txt new file mode 100644 index 000000000000..6b07f65b32de --- /dev/null +++ b/Documentation/devicetree/bindings/arm/sirf.txt @@ -0,0 +1,3 @@ +prima2 "cb" evalutation board +Required root node properties: + - compatible = "sirf,prima2-cb", "sirf,prima2"; diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 9adc278a22ab..aa6c91d0d794 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -879,6 +879,20 @@ config ARCH_VT8500 select HAVE_PWM help Support for VIA/WonderMedia VT8500/WM85xx System-on-Chip. + +config ARCH_PRIMA2 + bool "CSR SiRFSoC PRIMA2 ARM Cortex A9 Platform" + select CPU_V7 + select GENERIC_TIME + select NO_IOPORT + select GENERIC_CLOCKEVENTS + select CLKDEV_LOOKUP + select GENERIC_IRQ_CHIP + select USE_OF + select ZONE_DMA + help + Support for CSR SiRFSoC ARM Cortex A9 Platform + endchoice # diff --git a/arch/arm/Makefile b/arch/arm/Makefile index f5b2b390c8f2..1d693d06257e 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -169,6 +169,7 @@ machine-$(CONFIG_ARCH_OMAP3) := omap2 machine-$(CONFIG_ARCH_OMAP4) := omap2 machine-$(CONFIG_ARCH_ORION5X) := orion5x machine-$(CONFIG_ARCH_PNX4008) := pnx4008 +machine-$(CONFIG_ARCH_PRIMA2) := prima2 machine-$(CONFIG_ARCH_PXA) := pxa machine-$(CONFIG_ARCH_REALVIEW) := realview machine-$(CONFIG_ARCH_RPC) := rpc diff --git a/arch/arm/boot/dts/prima2-cb.dts b/arch/arm/boot/dts/prima2-cb.dts new file mode 100644 index 000000000000..6fecc88065b2 --- /dev/null +++ b/arch/arm/boot/dts/prima2-cb.dts @@ -0,0 +1,416 @@ +/dts-v1/; +/ { + model = "SiRF Prima2 eVB"; + compatible = "sirf,prima2-cb", "sirf,prima2"; + #address-cells = <1>; + #size-cells = <1>; + interrupt-parent = <&intc>; + + memory { + reg = <0x00000000 0x20000000>; + }; + + chosen { + bootargs = "mem=512M real_root=/dev/mmcblk0p2 console=ttyS0 panel=1 bootsplash=true bpp=16 androidboot.console=ttyS1"; + linux,stdout-path = &uart1; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + reg = <0x0>; + d-cache-line-size = <32>; + i-cache-line-size = <32>; + d-cache-size = <32768>; + i-cache-size = <32768>; + /* from bootloader */ + timebase-frequency = <0>; + bus-frequency = <0>; + clock-frequency = <0>; + }; + }; + + axi { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x40000000 0x40000000 0x80000000>; + + l2-cache-controller@80040000 { + compatible = "arm,pl310-cache"; + reg = <0x80040000 0x1000>; + interrupts = <59>; + }; + + intc: interrupt-controller@80020000 { + #interrupt-cells = <1>; + interrupt-controller; + compatible = "sirf,prima2-intc"; + reg = <0x80020000 0x1000>; + }; + + sys-iobg { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x88000000 0x88000000 0x40000>; + + clock-controller@88000000 { + compatible = "sirf,prima2-clkc"; + reg = <0x88000000 0x1000>; + interrupts = <3>; + }; + + reset-controller@88010000 { + compatible = "sirf,prima2-rstc"; + reg = <0x88010000 0x1000>; + }; + }; + + mem-iobg { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x90000000 0x90000000 0x10000>; + + memory-controller@90000000 { + compatible = "sirf,prima2-memc"; + reg = <0x90000000 0x10000>; + interrupts = <27>; + }; + }; + + disp-iobg { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x90010000 0x90010000 0x30000>; + + display@90010000 { + compatible = "sirf,prima2-lcd"; + reg = <0x90010000 0x20000>; + interrupts = <30>; + }; + + vpp@90020000 { + compatible = "sirf,prima2-vpp"; + reg = <0x90020000 0x10000>; + interrupts = <31>; + }; + }; + + graphics-iobg { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x98000000 0x98000000 0x8000000>; + + graphics@98000000 { + compatible = "powervr,sgx531"; + reg = <0x98000000 0x8000000>; + interrupts = <6>; + }; + }; + + multimedia-iobg { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0xa0000000 0xa0000000 0x8000000>; + + multimedia@a0000000 { + compatible = "sirf,prima2-video-codec"; + reg = <0xa0000000 0x8000000>; + interrupts = <5>; + }; + }; + + dsp-iobg { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0xa8000000 0xa8000000 0x2000000>; + + dspif@a8000000 { + compatible = "sirf,prima2-dspif"; + reg = <0xa8000000 0x10000>; + interrupts = <9>; + }; + + gps@a8010000 { + compatible = "sirf,prima2-gps"; + reg = <0xa8010000 0x10000>; + interrupts = <7>; + }; + + dsp@a9000000 { + compatible = "sirf,prima2-dsp"; + reg = <0xa9000000 0x1000000>; + interrupts = <8>; + }; + }; + + peri-iobg { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0xb0000000 0xb0000000 0x180000>; + + timer@b0020000 { + compatible = "sirf,prima2-tick"; + reg = <0xb0020000 0x1000>; + interrupts = <0>; + }; + + nand@b0030000 { + compatible = "sirf,prima2-nand"; + reg = <0xb0030000 0x10000>; + interrupts = <41>; + }; + + audio@b0040000 { + compatible = "sirf,prima2-audio"; + reg = <0xb0040000 0x10000>; + interrupts = <35>; + }; + + uart0: uart@b0050000 { + cell-index = <0>; + compatible = "sirf,prima2-uart"; + reg = <0xb0050000 0x10000>; + interrupts = <17>; + }; + + uart1: uart@b0060000 { + cell-index = <1>; + compatible = "sirf,prima2-uart"; + reg = <0xb0060000 0x10000>; + interrupts = <18>; + }; + + uart2: uart@b0070000 { + cell-index = <2>; + compatible = "sirf,prima2-uart"; + reg = <0xb0070000 0x10000>; + interrupts = <19>; + }; + + usp0: usp@b0080000 { + cell-index = <0>; + compatible = "sirf,prima2-usp"; + reg = <0xb0080000 0x10000>; + interrupts = <20>; + }; + + usp1: usp@b0090000 { + cell-index = <1>; + compatible = "sirf,prima2-usp"; + reg = <0xb0090000 0x10000>; + interrupts = <21>; + }; + + usp2: usp@b00a0000 { + cell-index = <2>; + compatible = "sirf,prima2-usp"; + reg = <0xb00a0000 0x10000>; + interrupts = <22>; + }; + + dmac0: dma-controller@b00b0000 { + cell-index = <0>; + compatible = "sirf,prima2-dmac"; + reg = <0xb00b0000 0x10000>; + interrupts = <12>; + }; + + dmac1: dma-controller@b0160000 { + cell-index = <1>; + compatible = "sirf,prima2-dmac"; + reg = <0xb0160000 0x10000>; + interrupts = <13>; + }; + + vip@b00C0000 { + compatible = "sirf,prima2-vip"; + reg = <0xb00C0000 0x10000>; + }; + + spi0: spi@b00d0000 { + cell-index = <0>; + compatible = "sirf,prima2-spi"; + reg = <0xb00d0000 0x10000>; + interrupts = <15>; + }; + + spi1: spi@b0170000 { + cell-index = <1>; + compatible = "sirf,prima2-spi"; + reg = <0xb0170000 0x10000>; + interrupts = <16>; + }; + + i2c0: i2c@b00e0000 { + cell-index = <0>; + compatible = "sirf,prima2-i2c"; + reg = <0xb00e0000 0x10000>; + interrupts = <24>; + }; + + i2c1: i2c@b00f0000 { + cell-index = <1>; + compatible = "sirf,prima2-i2c"; + reg = <0xb00f0000 0x10000>; + interrupts = <25>; + }; + + tsc@b0110000 { + compatible = "sirf,prima2-tsc"; + reg = <0xb0110000 0x10000>; + interrupts = <33>; + }; + + gpio: gpio-controller@b0120000 { + #gpio-cells = <2>; + #interrupt-cells = <2>; + compatible = "sirf,prima2-gpio"; + reg = <0xb0120000 0x10000>; + gpio-controller; + interrupt-controller; + }; + + pwm@b0130000 { + compatible = "sirf,prima2-pwm"; + reg = <0xb0130000 0x10000>; + }; + + efusesys@b0140000 { + compatible = "sirf,prima2-efuse"; + reg = <0xb0140000 0x10000>; + }; + + pulsec@b0150000 { + compatible = "sirf,prima2-pulsec"; + reg = <0xb0150000 0x10000>; + interrupts = <48>; + }; + + pci-iobg { + compatible = "sirf,prima2-pciiobg", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x56000000 0x56000000 0x1b00000>; + + sd0: sdhci@56000000 { + cell-index = <0>; + compatible = "sirf,prima2-sdhc"; + reg = <0x56000000 0x100000>; + interrupts = <38>; + }; + + sd1: sdhci@56100000 { + cell-index = <1>; + compatible = "sirf,prima2-sdhc"; + reg = <0x56100000 0x100000>; + interrupts = <38>; + }; + + sd2: sdhci@56200000 { + cell-index = <2>; + compatible = "sirf,prima2-sdhc"; + reg = <0x56200000 0x100000>; + interrupts = <23>; + }; + + sd3: sdhci@56300000 { + cell-index = <3>; + compatible = "sirf,prima2-sdhc"; + reg = <0x56300000 0x100000>; + interrupts = <23>; + }; + + sd4: sdhci@56400000 { + cell-index = <4>; + compatible = "sirf,prima2-sdhc"; + reg = <0x56400000 0x100000>; + interrupts = <39>; + }; + + sd5: sdhci@56500000 { + cell-index = <5>; + compatible = "sirf,prima2-sdhc"; + reg = <0x56500000 0x100000>; + interrupts = <39>; + }; + + pci-copy@57900000 { + compatible = "sirf,prima2-pcicp"; + reg = <0x57900000 0x100000>; + interrupts = <40>; + }; + + rom-interface@57a00000 { + compatible = "sirf,prima2-romif"; + reg = <0x57a00000 0x100000>; + }; + }; + }; + + rtc-iobg { + compatible = "sirf,prima2-rtciobg", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x80030000 0x10000>; + + gpsrtc@1000 { + compatible = "sirf,prima2-gpsrtc"; + reg = <0x1000 0x1000>; + interrupts = <55 56 57>; + }; + + sysrtc@2000 { + compatible = "sirf,prima2-sysrtc"; + reg = <0x2000 0x1000>; + interrupts = <52 53 54>; + }; + + pwrc@3000 { + compatible = "sirf,prima2-pwrc"; + reg = <0x3000 0x1000>; + interrupts = <32>; + }; + }; + + uus-iobg { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0xb8000000 0xb8000000 0x40000>; + + usb0: usb@b00e0000 { + compatible = "chipidea,ci13611a-prima2"; + reg = <0xb8000000 0x10000>; + interrupts = <10>; + }; + + usb1: usb@b00f0000 { + compatible = "chipidea,ci13611a-prima2"; + reg = <0xb8010000 0x10000>; + interrupts = <11>; + }; + + sata@b00f0000 { + compatible = "synopsys,dwc-ahsata"; + reg = <0xb8020000 0x10000>; + interrupts = <37>; + }; + + security@b00f0000 { + compatible = "sirf,prima2-security"; + reg = <0xb8030000 0x10000>; + interrupts = <42>; + }; + }; + }; +}; diff --git a/arch/arm/mach-prima2/Makefile b/arch/arm/mach-prima2/Makefile new file mode 100644 index 000000000000..d44f7aedda87 --- /dev/null +++ b/arch/arm/mach-prima2/Makefile @@ -0,0 +1,5 @@ +obj-y := timer.o +obj-y += irq.o +obj-y += clock.o +obj-y += rstc.o +obj-y += prima2.o diff --git a/arch/arm/mach-prima2/Makefile.boot b/arch/arm/mach-prima2/Makefile.boot new file mode 100644 index 000000000000..d023db3ae4ff --- /dev/null +++ b/arch/arm/mach-prima2/Makefile.boot @@ -0,0 +1,3 @@ +zreladdr-y := 0x00008000 +params_phys-y := 0x00000100 +initrd_phys-y := 0x00800000 diff --git a/arch/arm/mach-prima2/clock.c b/arch/arm/mach-prima2/clock.c new file mode 100644 index 000000000000..f9a2aaf63f71 --- /dev/null +++ b/arch/arm/mach-prima2/clock.c @@ -0,0 +1,509 @@ +/* + * Clock tree for CSR SiRFprimaII + * + * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company. + * + * Licensed under GPLv2 or later. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define SIRFSOC_CLKC_CLK_EN0 0x0000 +#define SIRFSOC_CLKC_CLK_EN1 0x0004 +#define SIRFSOC_CLKC_REF_CFG 0x0014 +#define SIRFSOC_CLKC_CPU_CFG 0x0018 +#define SIRFSOC_CLKC_MEM_CFG 0x001c +#define SIRFSOC_CLKC_SYS_CFG 0x0020 +#define SIRFSOC_CLKC_IO_CFG 0x0024 +#define SIRFSOC_CLKC_DSP_CFG 0x0028 +#define SIRFSOC_CLKC_GFX_CFG 0x002c +#define SIRFSOC_CLKC_MM_CFG 0x0030 +#define SIRFSOC_LKC_LCD_CFG 0x0034 +#define SIRFSOC_CLKC_MMC_CFG 0x0038 +#define SIRFSOC_CLKC_PLL1_CFG0 0x0040 +#define SIRFSOC_CLKC_PLL2_CFG0 0x0044 +#define SIRFSOC_CLKC_PLL3_CFG0 0x0048 +#define SIRFSOC_CLKC_PLL1_CFG1 0x004c +#define SIRFSOC_CLKC_PLL2_CFG1 0x0050 +#define SIRFSOC_CLKC_PLL3_CFG1 0x0054 +#define SIRFSOC_CLKC_PLL1_CFG2 0x0058 +#define SIRFSOC_CLKC_PLL2_CFG2 0x005c +#define SIRFSOC_CLKC_PLL3_CFG2 0x0060 + +#define SIRFSOC_CLOCK_VA_BASE SIRFSOC_VA(0x005000) + +#define KHZ 1000 +#define MHZ (KHZ * KHZ) + +struct clk_ops { + unsigned long (*get_rate)(struct clk *clk); + long (*round_rate)(struct clk *clk, unsigned long rate); + int (*set_rate)(struct clk *clk, unsigned long rate); + int (*enable)(struct clk *clk); + int (*disable)(struct clk *clk); + struct clk *(*get_parent)(struct clk *clk); + int (*set_parent)(struct clk *clk, struct clk *parent); +}; + +struct clk { + struct clk *parent; /* parent clk */ + unsigned long rate; /* clock rate in Hz */ + signed char usage; /* clock enable count */ + signed char enable_bit; /* enable bit: 0 ~ 63 */ + unsigned short regofs; /* register offset */ + struct clk_ops *ops; /* clock operation */ +}; + +static DEFINE_SPINLOCK(clocks_lock); + +static inline unsigned long clkc_readl(unsigned reg) +{ + return readl(SIRFSOC_CLOCK_VA_BASE + reg); +} + +static inline void clkc_writel(u32 val, unsigned reg) +{ + writel(val, SIRFSOC_CLOCK_VA_BASE + reg); +} + +/* + * osc_rtc - real time oscillator - 32.768KHz + * osc_sys - high speed oscillator - 26MHz + */ + +static struct clk clk_rtc = { + .rate = 32768, +}; + +static struct clk clk_osc = { + .rate = 26 * MHZ, +}; + +/* + * std pll + */ +static unsigned long std_pll_get_rate(struct clk *clk) +{ + unsigned long fin = clk_get_rate(clk->parent); + u32 regcfg2 = clk->regofs + SIRFSOC_CLKC_PLL1_CFG2 - + SIRFSOC_CLKC_PLL1_CFG0; + + if (clkc_readl(regcfg2) & BIT(2)) { + /* pll bypass mode */ + clk->rate = fin; + } else { + /* fout = fin * nf / nr / od */ + u32 cfg0 = clkc_readl(clk->regofs); + u32 nf = (cfg0 & (BIT(13) - 1)) + 1; + u32 nr = ((cfg0 >> 13) & (BIT(6) - 1)) + 1; + u32 od = ((cfg0 >> 19) & (BIT(4) - 1)) + 1; + WARN_ON(fin % MHZ); + clk->rate = fin / MHZ * nf / nr / od * MHZ; + } + + return clk->rate; +} + +static int std_pll_set_rate(struct clk *clk, unsigned long rate) +{ + unsigned long fin, nf, nr, od, reg; + + /* + * fout = fin * nf / (nr * od); + * set od = 1, nr = fin/MHz, so fout = nf * MHz + */ + + nf = rate / MHZ; + if (unlikely((rate % MHZ) || nf > BIT(13) || nf < 1)) + return -EINVAL; + + fin = clk_get_rate(clk->parent); + BUG_ON(fin < MHZ); + + nr = fin / MHZ; + BUG_ON((fin % MHZ) || nr > BIT(6)); + + od = 1; + + reg = (nf - 1) | ((nr - 1) << 13) | ((od - 1) << 19); + clkc_writel(reg, clk->regofs); + + reg = clk->regofs + SIRFSOC_CLKC_PLL1_CFG1 - SIRFSOC_CLKC_PLL1_CFG0; + clkc_writel((nf >> 1) - 1, reg); + + reg = clk->regofs + SIRFSOC_CLKC_PLL1_CFG2 - SIRFSOC_CLKC_PLL1_CFG0; + while (!(clkc_readl(reg) & BIT(6))) + cpu_relax(); + + clk->rate = 0; /* set to zero will force recalculation */ + return 0; +} + +static struct clk_ops std_pll_ops = { + .get_rate = std_pll_get_rate, + .set_rate = std_pll_set_rate, +}; + +static struct clk clk_pll1 = { + .parent = &clk_osc, + .regofs = SIRFSOC_CLKC_PLL1_CFG0, + .ops = &std_pll_ops, +}; + +static struct clk clk_pll2 = { + .parent = &clk_osc, + .regofs = SIRFSOC_CLKC_PLL2_CFG0, + .ops = &std_pll_ops, +}; + +static struct clk clk_pll3 = { + .parent = &clk_osc, + .regofs = SIRFSOC_CLKC_PLL3_CFG0, + .ops = &std_pll_ops, +}; + +/* + * clock domains - cpu, mem, sys/io + */ + +static struct clk clk_mem; + +static struct clk *dmn_get_parent(struct clk *clk) +{ + struct clk *clks[] = { + &clk_osc, &clk_rtc, &clk_pll1, &clk_pll2, &clk_pll3 + }; + u32 cfg = clkc_readl(clk->regofs); + WARN_ON((cfg & (BIT(3) - 1)) > 4); + return clks[cfg & (BIT(3) - 1)]; +} + +static int dmn_set_parent(struct clk *clk, struct clk *parent) +{ + const struct clk *clks[] = { + &clk_osc, &clk_rtc, &clk_pll1, &clk_pll2, &clk_pll3 + }; + u32 cfg = clkc_readl(clk->regofs); + int i; + for (i = 0; i < ARRAY_SIZE(clks); i++) { + if (clks[i] == parent) { + cfg &= ~(BIT(3) - 1); + clkc_writel(cfg | i, clk->regofs); + /* BIT(3) - switching status: 1 - busy, 0 - done */ + while (clkc_readl(clk->regofs) & BIT(3)) + cpu_relax(); + return 0; + } + } + return -EINVAL; +} + +static unsigned long dmn_get_rate(struct clk *clk) +{ + unsigned long fin = clk_get_rate(clk->parent); + u32 cfg = clkc_readl(clk->regofs); + if (cfg & BIT(24)) { + /* fcd bypass mode */ + clk->rate = fin; + } else { + /* + * wait count: bit[19:16], hold count: bit[23:20] + */ + u32 wait = (cfg >> 16) & (BIT(4) - 1); + u32 hold = (cfg >> 20) & (BIT(4) - 1); + + clk->rate = fin / (wait + hold + 2); + } + + return clk->rate; +} + +static int dmn_set_rate(struct clk *clk, unsigned long rate) +{ + unsigned long fin; + unsigned ratio, wait, hold, reg; + unsigned bits = (clk == &clk_mem) ? 3 : 4; + + fin = clk_get_rate(clk->parent); + ratio = fin / rate; + + if (unlikely(ratio < 2 || ratio > BIT(bits + 1))) + return -EINVAL; + + WARN_ON(fin % rate); + + wait = (ratio >> 1) - 1; + hold = ratio - wait - 2; + + reg = clkc_readl(clk->regofs); + reg &= ~(((BIT(bits) - 1) << 16) | ((BIT(bits) - 1) << 20)); + reg |= (wait << 16) | (hold << 20) | BIT(25); + clkc_writel(reg, clk->regofs); + + /* waiting FCD been effective */ + while (clkc_readl(clk->regofs) & BIT(25)) + cpu_relax(); + + clk->rate = 0; /* set to zero will force recalculation */ + + return 0; +} + +/* + * cpu clock has no FCD register in Prima2, can only change pll + */ +static int cpu_set_rate(struct clk *clk, unsigned long rate) +{ + int ret1, ret2; + struct clk *cur_parent, *tmp_parent; + + cur_parent = dmn_get_parent(clk); + BUG_ON(cur_parent == NULL || cur_parent->usage > 1); + + /* switch to tmp pll before setting parent clock's rate */ + tmp_parent = cur_parent == &clk_pll1 ? &clk_pll2 : &clk_pll1; + ret1 = dmn_set_parent(clk, tmp_parent); + BUG_ON(ret1); + + ret2 = clk_set_rate(cur_parent, rate); + + ret1 = dmn_set_parent(clk, cur_parent); + + clk->rate = 0; /* set to zero will force recalculation */ + + return ret2 ? ret2 : ret1; +} + +static struct clk_ops cpu_ops = { + .get_parent = dmn_get_parent, + .set_parent = dmn_set_parent, + .set_rate = cpu_set_rate, +}; + +static struct clk clk_cpu = { + .parent = &clk_pll1, + .regofs = SIRFSOC_CLKC_CPU_CFG, + .ops = &cpu_ops, +}; + + +static struct clk_ops msi_ops = { + .set_rate = dmn_set_rate, + .get_rate = dmn_get_rate, + .set_parent = dmn_set_parent, + .get_parent = dmn_get_parent, +}; + +static struct clk clk_mem = { + .parent = &clk_pll2, + .regofs = SIRFSOC_CLKC_MEM_CFG, + .ops = &msi_ops, +}; + +static struct clk clk_sys = { + .parent = &clk_pll3, + .regofs = SIRFSOC_CLKC_SYS_CFG, + .ops = &msi_ops, +}; + +static struct clk clk_io = { + .parent = &clk_pll3, + .regofs = SIRFSOC_CLKC_IO_CFG, + .ops = &msi_ops, +}; + +/* + * on-chip clock sets + */ +static struct clk_lookup onchip_clks[] = { + { + .dev_id = "rtc", + .clk = &clk_rtc, + }, { + .dev_id = "osc", + .clk = &clk_osc, + }, { + .dev_id = "pll1", + .clk = &clk_pll1, + }, { + .dev_id = "pll2", + .clk = &clk_pll2, + }, { + .dev_id = "pll3", + .clk = &clk_pll3, + }, { + .dev_id = "cpu", + .clk = &clk_cpu, + }, { + .dev_id = "mem", + .clk = &clk_mem, + }, { + .dev_id = "sys", + .clk = &clk_sys, + }, { + .dev_id = "io", + .clk = &clk_io, + }, +}; + +int clk_enable(struct clk *clk) +{ + unsigned long flags; + + if (unlikely(IS_ERR_OR_NULL(clk))) + return -EINVAL; + + if (clk->parent) + clk_enable(clk->parent); + + spin_lock_irqsave(&clocks_lock, flags); + if (!clk->usage++ && clk->ops && clk->ops->enable) + clk->ops->enable(clk); + spin_unlock_irqrestore(&clocks_lock, flags); + return 0; +} +EXPORT_SYMBOL(clk_enable); + +void clk_disable(struct clk *clk) +{ + unsigned long flags; + + if (unlikely(IS_ERR_OR_NULL(clk))) + return; + + WARN_ON(!clk->usage); + + spin_lock_irqsave(&clocks_lock, flags); + if (--clk->usage == 0 && clk->ops && clk->ops->disable) + clk->ops->disable(clk); + spin_unlock_irqrestore(&clocks_lock, flags); + + if (clk->parent) + clk_disable(clk->parent); +} +EXPORT_SYMBOL(clk_disable); + +unsigned long clk_get_rate(struct clk *clk) +{ + if (unlikely(IS_ERR_OR_NULL(clk))) + return 0; + + if (clk->rate) + return clk->rate; + + if (clk->ops && clk->ops->get_rate) + return clk->ops->get_rate(clk); + + return clk_get_rate(clk->parent); +} +EXPORT_SYMBOL(clk_get_rate); + +long clk_round_rate(struct clk *clk, unsigned long rate) +{ + if (unlikely(IS_ERR_OR_NULL(clk))) + return 0; + + if (clk->ops && clk->ops->round_rate) + return clk->ops->round_rate(clk, rate); + + return 0; +} +EXPORT_SYMBOL(clk_round_rate); + +int clk_set_rate(struct clk *clk, unsigned long rate) +{ + if (unlikely(IS_ERR_OR_NULL(clk))) + return -EINVAL; + + if (!clk->ops || !clk->ops->set_rate) + return -EINVAL; + + return clk->ops->set_rate(clk, rate); +} +EXPORT_SYMBOL(clk_set_rate); + +int clk_set_parent(struct clk *clk, struct clk *parent) +{ + int ret; + unsigned long flags; + + if (unlikely(IS_ERR_OR_NULL(clk))) + return -EINVAL; + + if (!clk->ops || !clk->ops->set_parent) + return -EINVAL; + + spin_lock_irqsave(&clocks_lock, flags); + ret = clk->ops->set_parent(clk, parent); + if (!ret) { + parent->usage += clk->usage; + clk->parent->usage -= clk->usage; + BUG_ON(clk->parent->usage < 0); + clk->parent = parent; + } + spin_unlock_irqrestore(&clocks_lock, flags); + return ret; +} +EXPORT_SYMBOL(clk_set_parent); + +struct clk *clk_get_parent(struct clk *clk) +{ + unsigned long flags; + + if (unlikely(IS_ERR_OR_NULL(clk))) + return NULL; + + if (!clk->ops || !clk->ops->get_parent) + return clk->parent; + + spin_lock_irqsave(&clocks_lock, flags); + clk->parent = clk->ops->get_parent(clk); + spin_unlock_irqrestore(&clocks_lock, flags); + return clk->parent; +} +EXPORT_SYMBOL(clk_get_parent); + +static void __init sirfsoc_clk_init(void) +{ + clkdev_add_table(onchip_clks, ARRAY_SIZE(onchip_clks)); +} + +static struct of_device_id clkc_ids[] = { + { .compatible = "sirf,prima2-clkc" }, +}; + +void __init sirfsoc_of_clk_init(void) +{ + struct device_node *np; + struct resource res; + struct map_desc sirfsoc_clkc_iodesc = { + .virtual = SIRFSOC_CLOCK_VA_BASE, + .type = MT_DEVICE, + }; + + np = of_find_matching_node(NULL, clkc_ids); + if (!np) + panic("unable to find compatible clkc node in dtb\n"); + + if (of_address_to_resource(np, 0, &res)) + panic("unable to find clkc range in dtb"); + of_node_put(np); + + sirfsoc_clkc_iodesc.pfn = __phys_to_pfn(res.start); + sirfsoc_clkc_iodesc.length = 1 + res.end - res.start; + + iotable_init(&sirfsoc_clkc_iodesc, 1); + + sirfsoc_clk_init(); +} diff --git a/arch/arm/mach-prima2/common.h b/arch/arm/mach-prima2/common.h new file mode 100644 index 000000000000..fa4a3b5c674a --- /dev/null +++ b/arch/arm/mach-prima2/common.h @@ -0,0 +1,20 @@ +/* + * This file contains common function prototypes to avoid externs in the c files. + * + * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company. + * + * Licensed under GPLv2 or later. + */ + +#ifndef __MACH_PRIMA2_COMMON_H__ +#define __MACH_PRIMA2_COMMON_H__ + +#include +#include + +extern struct sys_timer sirfsoc_timer; + +extern void __init sirfsoc_of_irq_init(void); +extern void __init sirfsoc_of_clk_init(void); + +#endif diff --git a/arch/arm/mach-prima2/include/mach/clkdev.h b/arch/arm/mach-prima2/include/mach/clkdev.h new file mode 100644 index 000000000000..66932518b1b7 --- /dev/null +++ b/arch/arm/mach-prima2/include/mach/clkdev.h @@ -0,0 +1,15 @@ +/* + * arch/arm/mach-prima2/include/mach/clkdev.h + * + * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company. + * + * Licensed under GPLv2 or later. + */ + +#ifndef __MACH_CLKDEV_H +#define __MACH_CLKDEV_H + +#define __clk_get(clk) ({ 1; }) +#define __clk_put(clk) do { } while (0) + +#endif diff --git a/arch/arm/mach-prima2/include/mach/debug-macro.S b/arch/arm/mach-prima2/include/mach/debug-macro.S new file mode 100644 index 000000000000..bf75106333ff --- /dev/null +++ b/arch/arm/mach-prima2/include/mach/debug-macro.S @@ -0,0 +1,29 @@ +/* + * arch/arm/mach-prima2/include/mach/debug-macro.S + * + * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company. + * + * Licensed under GPLv2 or later. + */ + +#include +#include + + .macro addruart, rp, rv + ldr \rp, =SIRFSOC_UART1_PA_BASE @ physical + ldr \rv, =SIRFSOC_UART1_VA_BASE @ virtual + .endm + + .macro senduart,rd,rx + str \rd, [\rx, #SIRFSOC_UART_TXFIFO_DATA] + .endm + + .macro busyuart,rd,rx + .endm + + .macro waituart,rd,rx +1001: ldr \rd, [\rx, #SIRFSOC_UART_TXFIFO_STATUS] + tst \rd, #SIRFSOC_UART1_TXFIFO_EMPTY + beq 1001b + .endm + diff --git a/arch/arm/mach-prima2/include/mach/entry-macro.S b/arch/arm/mach-prima2/include/mach/entry-macro.S new file mode 100644 index 000000000000..1c8a50f102a7 --- /dev/null +++ b/arch/arm/mach-prima2/include/mach/entry-macro.S @@ -0,0 +1,29 @@ +/* + * arch/arm/mach-prima2/include/mach/entry-macro.S + * + * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company. + * + * Licensed under GPLv2 or later. + */ + +#include + +#define SIRFSOC_INT_ID 0x38 + + .macro get_irqnr_preamble, base, tmp + ldr \base, =sirfsoc_intc_base + ldr \base, [\base] + .endm + + .macro get_irqnr_and_base, irqnr, irqstat, base, tmp + ldr \irqnr, [\base, #SIRFSOC_INT_ID] @ Get the highest priority irq + cmp \irqnr, #0x40 @ the irq num can't be larger than 0x3f + movges \irqnr, #0 + .endm + + .macro disable_fiq + .endm + + .macro arch_ret_to_user, tmp1, tmp2 + .endm + diff --git a/arch/arm/mach-prima2/include/mach/hardware.h b/arch/arm/mach-prima2/include/mach/hardware.h new file mode 100644 index 000000000000..105b96964f25 --- /dev/null +++ b/arch/arm/mach-prima2/include/mach/hardware.h @@ -0,0 +1,15 @@ +/* + * arch/arm/mach-prima2/include/mach/hardware.h + * + * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company. + * + * Licensed under GPLv2 or later. + */ + +#ifndef __MACH_HARDWARE_H__ +#define __MACH_HARDWARE_H__ + +#include +#include + +#endif diff --git a/arch/arm/mach-prima2/include/mach/io.h b/arch/arm/mach-prima2/include/mach/io.h new file mode 100644 index 000000000000..6c31e9ec279e --- /dev/null +++ b/arch/arm/mach-prima2/include/mach/io.h @@ -0,0 +1,16 @@ +/* + * arch/arm/mach-prima2/include/mach/io.h + * + * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company. + * + * Licensed under GPLv2 or later. + */ + +#ifndef __MACH_PRIMA2_IO_H +#define __MACH_PRIMA2_IO_H + +#define IO_SPACE_LIMIT ((resource_size_t)0) + +#define __mem_pci(a) (a) + +#endif diff --git a/arch/arm/mach-prima2/include/mach/irqs.h b/arch/arm/mach-prima2/include/mach/irqs.h new file mode 100644 index 000000000000..bb354f952fd6 --- /dev/null +++ b/arch/arm/mach-prima2/include/mach/irqs.h @@ -0,0 +1,17 @@ +/* + * arch/arm/mach-prima2/include/mach/irqs.h + * + * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company. + * + * Licensed under GPLv2 or later. + */ + +#ifndef __ASM_ARCH_IRQS_H +#define __ASM_ARCH_IRQS_H + +#define SIRFSOC_INTENAL_IRQ_START 0 +#define SIRFSOC_INTENAL_IRQ_END 59 + +#define NR_IRQS 220 + +#endif diff --git a/arch/arm/mach-prima2/include/mach/map.h b/arch/arm/mach-prima2/include/mach/map.h new file mode 100644 index 000000000000..66b1ae2e553f --- /dev/null +++ b/arch/arm/mach-prima2/include/mach/map.h @@ -0,0 +1,16 @@ +/* + * memory & I/O static mapping definitions for CSR SiRFprimaII + * + * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company. + * + * Licensed under GPLv2 or later. + */ + +#ifndef __MACH_PRIMA2_MAP_H__ +#define __MACH_PRIMA2_MAP_H__ + +#include + +#define SIRFSOC_VA(x) (VMALLOC_END + ((x) & 0x00FFF000)) + +#endif diff --git a/arch/arm/mach-prima2/include/mach/memory.h b/arch/arm/mach-prima2/include/mach/memory.h new file mode 100644 index 000000000000..368cd5a0601a --- /dev/null +++ b/arch/arm/mach-prima2/include/mach/memory.h @@ -0,0 +1,21 @@ +/* + * arch/arm/mach-prima2/include/mach/memory.h + * + * Copyright (c) 2010 – 2011 Cambridge Silicon Radio Limited, a CSR plc group company. + * + * Licensed under GPLv2 or later. + */ + +#ifndef __ASM_ARCH_MEMORY_H +#define __ASM_ARCH_MEMORY_H + +#define PLAT_PHYS_OFFSET UL(0x00000000) + +/* + * Restrict DMA-able region to workaround silicon limitation. + * The limitation restricts buffers available for DMA to SD/MMC + * hardware to be below 256MB + */ +#define ARM_DMA_ZONE_SIZE (SZ_256M) + +#endif diff --git a/arch/arm/mach-prima2/include/mach/system.h b/arch/arm/mach-prima2/include/mach/system.h new file mode 100644 index 000000000000..0dbd257ad16d --- /dev/null +++ b/arch/arm/mach-prima2/include/mach/system.h @@ -0,0 +1,29 @@ +/* + * arch/arm/mach-prima2/include/mach/system.h + * + * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company. + * + * Licensed under GPLv2 or later. + */ + +#ifndef __MACH_SYSTEM_H__ +#define __MACH_SYSTEM_H__ + +#include +#include + +#define SIRFSOC_SYS_RST_BIT BIT(31) + +extern void __iomem *sirfsoc_rstc_base; + +static inline void arch_idle(void) +{ + cpu_do_idle(); +} + +static inline void arch_reset(char mode, const char *cmd) +{ + writel(SIRFSOC_SYS_RST_BIT, sirfsoc_rstc_base); +} + +#endif diff --git a/arch/arm/mach-prima2/include/mach/timex.h b/arch/arm/mach-prima2/include/mach/timex.h new file mode 100644 index 000000000000..d6f98a75e562 --- /dev/null +++ b/arch/arm/mach-prima2/include/mach/timex.h @@ -0,0 +1,14 @@ +/* + * arch/arm/mach-prima2/include/mach/timex.h + * + * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company. + * + * Licensed under GPLv2 or later. + */ + +#ifndef __MACH_TIMEX_H__ +#define __MACH_TIMEX_H__ + +#define CLOCK_TICK_RATE 1000000 + +#endif diff --git a/arch/arm/mach-prima2/include/mach/uart.h b/arch/arm/mach-prima2/include/mach/uart.h new file mode 100644 index 000000000000..c98b4d5ac24a --- /dev/null +++ b/arch/arm/mach-prima2/include/mach/uart.h @@ -0,0 +1,23 @@ +/* + * arch/arm/mach-prima2/include/mach/uart.h + * + * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company. + * + * Licensed under GPLv2 or later. + */ + +#ifndef __MACH_PRIMA2_SIRFSOC_UART_H +#define __MACH_PRIMA2_SIRFSOC_UART_H + +/* UART-1: used as serial debug port */ +#define SIRFSOC_UART1_PA_BASE 0xb0060000 +#define SIRFSOC_UART1_VA_BASE SIRFSOC_VA(0x060000) +#define SIRFSOC_UART1_SIZE SZ_4K + +#define SIRFSOC_UART_TXFIFO_STATUS 0x0114 +#define SIRFSOC_UART_TXFIFO_DATA 0x0118 + +#define SIRFSOC_UART1_TXFIFO_FULL (1 << 5) +#define SIRFSOC_UART1_TXFIFO_EMPTY (1 << 6) + +#endif diff --git a/arch/arm/mach-prima2/include/mach/uncompress.h b/arch/arm/mach-prima2/include/mach/uncompress.h new file mode 100644 index 000000000000..83125c6a30b3 --- /dev/null +++ b/arch/arm/mach-prima2/include/mach/uncompress.h @@ -0,0 +1,40 @@ +/* + * arch/arm/mach-prima2/include/mach/uncompress.h + * + * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company. + * + * Licensed under GPLv2 or later. + */ + +#ifndef __ASM_ARCH_UNCOMPRESS_H +#define __ASM_ARCH_UNCOMPRESS_H + +#include +#include +#include + +void arch_decomp_setup(void) +{ +} + +#define arch_decomp_wdog() + +static __inline__ void putc(char c) +{ + /* + * during kernel decompression, all mappings are flat: + * virt_addr == phys_addr + */ + while (__raw_readl(SIRFSOC_UART1_PA_BASE + SIRFSOC_UART_TXFIFO_STATUS) + & SIRFSOC_UART1_TXFIFO_FULL) + barrier(); + + __raw_writel(c, SIRFSOC_UART1_PA_BASE + SIRFSOC_UART_TXFIFO_DATA); +} + +static inline void flush(void) +{ +} + +#endif + diff --git a/arch/arm/mach-prima2/include/mach/vmalloc.h b/arch/arm/mach-prima2/include/mach/vmalloc.h new file mode 100644 index 000000000000..c9f90fec78e3 --- /dev/null +++ b/arch/arm/mach-prima2/include/mach/vmalloc.h @@ -0,0 +1,16 @@ +/* + * arch/arm/ach-prima2/include/mach/vmalloc.h + * + * Copyright (c) 2010 – 2011 Cambridge Silicon Radio Limited, a CSR plc group company. + * + * Licensed under GPLv2 or later. + */ + +#ifndef __MACH_VMALLOC_H +#define __MACH_VMALLOC_H + +#include + +#define VMALLOC_END _AC(0xFEC00000, UL) + +#endif diff --git a/arch/arm/mach-prima2/irq.c b/arch/arm/mach-prima2/irq.c new file mode 100644 index 000000000000..c3404cbb6ff7 --- /dev/null +++ b/arch/arm/mach-prima2/irq.c @@ -0,0 +1,71 @@ +/* + * interrupt controller support for CSR SiRFprimaII + * + * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company. + * + * Licensed under GPLv2 or later. + */ + +#include +#include +#include +#include +#include +#include +#include + +#define SIRFSOC_INT_RISC_MASK0 0x0018 +#define SIRFSOC_INT_RISC_MASK1 0x001C +#define SIRFSOC_INT_RISC_LEVEL0 0x0020 +#define SIRFSOC_INT_RISC_LEVEL1 0x0024 + +void __iomem *sirfsoc_intc_base; + +static __init void +sirfsoc_alloc_gc(void __iomem *base, unsigned int irq_start, unsigned int num) +{ + struct irq_chip_generic *gc; + struct irq_chip_type *ct; + + gc = irq_alloc_generic_chip("SIRFINTC", 1, irq_start, base, handle_level_irq); + ct = gc->chip_types; + + ct->chip.irq_mask = irq_gc_mask_clr_bit; + ct->chip.irq_unmask = irq_gc_mask_set_bit; + ct->regs.mask = SIRFSOC_INT_RISC_MASK0; + + irq_setup_generic_chip(gc, IRQ_MSK(num), IRQ_GC_INIT_MASK_CACHE, IRQ_NOREQUEST, 0); +} + +static __init void sirfsoc_irq_init(void) +{ + sirfsoc_alloc_gc(sirfsoc_intc_base, 0, 32); + sirfsoc_alloc_gc(sirfsoc_intc_base + 4, 32, SIRFSOC_INTENAL_IRQ_END - 32); + + writel_relaxed(0, sirfsoc_intc_base + SIRFSOC_INT_RISC_LEVEL0); + writel_relaxed(0, sirfsoc_intc_base + SIRFSOC_INT_RISC_LEVEL1); + + writel_relaxed(0, sirfsoc_intc_base + SIRFSOC_INT_RISC_MASK0); + writel_relaxed(0, sirfsoc_intc_base + SIRFSOC_INT_RISC_MASK1); +} + +static struct of_device_id intc_ids[] = { + { .compatible = "sirf,prima2-intc" }, +}; + +void __init sirfsoc_of_irq_init(void) +{ + struct device_node *np; + + np = of_find_matching_node(NULL, intc_ids); + if (!np) + panic("unable to find compatible intc node in dtb\n"); + + sirfsoc_intc_base = of_iomap(np, 0); + if (!sirfsoc_intc_base) + panic("unable to map intc cpu registers\n"); + + of_node_put(np); + + sirfsoc_irq_init(); +} diff --git a/arch/arm/mach-prima2/prima2.c b/arch/arm/mach-prima2/prima2.c new file mode 100644 index 000000000000..c26947d76e12 --- /dev/null +++ b/arch/arm/mach-prima2/prima2.c @@ -0,0 +1,40 @@ +/* + * Defines machines for CSR SiRFprimaII + * + * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company. + * + * Licensed under GPLv2 or later. + */ + +#include +#include +#include +#include +#include +#include +#include "common.h" + +static struct of_device_id sirfsoc_of_bus_ids[] __initdata = { + { .compatible = "simple-bus", }, + {}, +}; + +void __init sirfsoc_mach_init(void) +{ + of_platform_bus_probe(NULL, sirfsoc_of_bus_ids, NULL); +} + +static const char *prima2cb_dt_match[] __initdata = { + "sirf,prima2-cb", + NULL +}; + +MACHINE_START(PRIMA2_EVB, "prima2cb") + /* Maintainer: Barry Song */ + .boot_params = 0x00000100, + .init_early = sirfsoc_of_clk_init, + .init_irq = sirfsoc_of_irq_init, + .timer = &sirfsoc_timer, + .init_machine = sirfsoc_mach_init, + .dt_compat = prima2cb_dt_match, +MACHINE_END diff --git a/arch/arm/mach-prima2/rstc.c b/arch/arm/mach-prima2/rstc.c new file mode 100644 index 000000000000..d074786e83d4 --- /dev/null +++ b/arch/arm/mach-prima2/rstc.c @@ -0,0 +1,69 @@ +/* + * reset controller for CSR SiRFprimaII + * + * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company. + * + * Licensed under GPLv2 or later. + */ + +#include +#include +#include +#include +#include +#include +#include + +void __iomem *sirfsoc_rstc_base; +static DEFINE_MUTEX(rstc_lock); + +static struct of_device_id rstc_ids[] = { + { .compatible = "sirf,prima2-rstc" }, +}; + +static int __init sirfsoc_of_rstc_init(void) +{ + struct device_node *np; + + np = of_find_matching_node(NULL, rstc_ids); + if (!np) + panic("unable to find compatible rstc node in dtb\n"); + + sirfsoc_rstc_base = of_iomap(np, 0); + if (!sirfsoc_rstc_base) + panic("unable to map rstc cpu registers\n"); + + of_node_put(np); + + return 0; +} +early_initcall(sirfsoc_of_rstc_init); + +int sirfsoc_reset_device(struct device *dev) +{ + const unsigned int *prop = of_get_property(dev->of_node, "reset-bit", NULL); + unsigned int reset_bit; + + if (!prop) + return -ENODEV; + + reset_bit = be32_to_cpup(prop); + + mutex_lock(&rstc_lock); + + /* + * Writing 1 to this bit resets corresponding block. Writing 0 to this + * bit de-asserts reset signal of the corresponding block. + * datasheet doesn't require explicit delay between the set and clear + * of reset bit. it could be shorter if tests pass. + */ + writel(readl(sirfsoc_rstc_base + (reset_bit / 32) * 4) | reset_bit, + sirfsoc_rstc_base + (reset_bit / 32) * 4); + msleep(10); + writel(readl(sirfsoc_rstc_base + (reset_bit / 32) * 4) & ~reset_bit, + sirfsoc_rstc_base + (reset_bit / 32) * 4); + + mutex_unlock(&rstc_lock); + + return 0; +} diff --git a/arch/arm/mach-prima2/timer.c b/arch/arm/mach-prima2/timer.c new file mode 100644 index 000000000000..44027f34a88a --- /dev/null +++ b/arch/arm/mach-prima2/timer.c @@ -0,0 +1,217 @@ +/* + * System timer for CSR SiRFprimaII + * + * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company. + * + * Licensed under GPLv2 or later. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define SIRFSOC_TIMER_COUNTER_LO 0x0000 +#define SIRFSOC_TIMER_COUNTER_HI 0x0004 +#define SIRFSOC_TIMER_MATCH_0 0x0008 +#define SIRFSOC_TIMER_MATCH_1 0x000C +#define SIRFSOC_TIMER_MATCH_2 0x0010 +#define SIRFSOC_TIMER_MATCH_3 0x0014 +#define SIRFSOC_TIMER_MATCH_4 0x0018 +#define SIRFSOC_TIMER_MATCH_5 0x001C +#define SIRFSOC_TIMER_STATUS 0x0020 +#define SIRFSOC_TIMER_INT_EN 0x0024 +#define SIRFSOC_TIMER_WATCHDOG_EN 0x0028 +#define SIRFSOC_TIMER_DIV 0x002C +#define SIRFSOC_TIMER_LATCH 0x0030 +#define SIRFSOC_TIMER_LATCHED_LO 0x0034 +#define SIRFSOC_TIMER_LATCHED_HI 0x0038 + +#define SIRFSOC_TIMER_WDT_INDEX 5 + +#define SIRFSOC_TIMER_LATCH_BIT BIT(0) + +static void __iomem *sirfsoc_timer_base; +static void __init sirfsoc_of_timer_map(void); + +/* timer0 interrupt handler */ +static irqreturn_t sirfsoc_timer_interrupt(int irq, void *dev_id) +{ + struct clock_event_device *ce = dev_id; + + WARN_ON(!(readl_relaxed(sirfsoc_timer_base + SIRFSOC_TIMER_STATUS) & BIT(0))); + + /* clear timer0 interrupt */ + writel_relaxed(BIT(0), sirfsoc_timer_base + SIRFSOC_TIMER_STATUS); + + ce->event_handler(ce); + + return IRQ_HANDLED; +} + +/* read 64-bit timer counter */ +static cycle_t sirfsoc_timer_read(struct clocksource *cs) +{ + u64 cycles; + + /* latch the 64-bit timer counter */ + writel_relaxed(SIRFSOC_TIMER_LATCH_BIT, sirfsoc_timer_base + SIRFSOC_TIMER_LATCH); + cycles = readl_relaxed(sirfsoc_timer_base + SIRFSOC_TIMER_LATCHED_HI); + cycles = (cycles << 32) | readl_relaxed(sirfsoc_timer_base + SIRFSOC_TIMER_LATCHED_LO); + + return cycles; +} + +static int sirfsoc_timer_set_next_event(unsigned long delta, + struct clock_event_device *ce) +{ + unsigned long now, next; + + writel_relaxed(SIRFSOC_TIMER_LATCH_BIT, sirfsoc_timer_base + SIRFSOC_TIMER_LATCH); + now = readl_relaxed(sirfsoc_timer_base + SIRFSOC_TIMER_LATCHED_LO); + next = now + delta; + writel_relaxed(next, sirfsoc_timer_base + SIRFSOC_TIMER_MATCH_0); + writel_relaxed(SIRFSOC_TIMER_LATCH_BIT, sirfsoc_timer_base + SIRFSOC_TIMER_LATCH); + now = readl_relaxed(sirfsoc_timer_base + SIRFSOC_TIMER_LATCHED_LO); + + return next - now > delta ? -ETIME : 0; +} + +static void sirfsoc_timer_set_mode(enum clock_event_mode mode, + struct clock_event_device *ce) +{ + u32 val = readl_relaxed(sirfsoc_timer_base + SIRFSOC_TIMER_INT_EN); + switch (mode) { + case CLOCK_EVT_MODE_PERIODIC: + WARN_ON(1); + break; + case CLOCK_EVT_MODE_ONESHOT: + writel_relaxed(val | BIT(0), sirfsoc_timer_base + SIRFSOC_TIMER_INT_EN); + break; + case CLOCK_EVT_MODE_SHUTDOWN: + writel_relaxed(val & ~BIT(0), sirfsoc_timer_base + SIRFSOC_TIMER_INT_EN); + break; + case CLOCK_EVT_MODE_UNUSED: + case CLOCK_EVT_MODE_RESUME: + break; + } +} + +static struct clock_event_device sirfsoc_clockevent = { + .name = "sirfsoc_clockevent", + .rating = 200, + .features = CLOCK_EVT_FEAT_ONESHOT, + .set_mode = sirfsoc_timer_set_mode, + .set_next_event = sirfsoc_timer_set_next_event, +}; + +static struct clocksource sirfsoc_clocksource = { + .name = "sirfsoc_clocksource", + .rating = 200, + .mask = CLOCKSOURCE_MASK(64), + .flags = CLOCK_SOURCE_IS_CONTINUOUS, + .read = sirfsoc_timer_read, +}; + +static struct irqaction sirfsoc_timer_irq = { + .name = "sirfsoc_timer0", + .flags = IRQF_TIMER, + .irq = 0, + .handler = sirfsoc_timer_interrupt, + .dev_id = &sirfsoc_clockevent, +}; + +/* Overwrite weak default sched_clock with more precise one */ +unsigned long long notrace sched_clock(void) +{ + static int is_mapped = 0; + + /* + * sched_clock is called earlier than .init of sys_timer + * if we map timer memory in .init of sys_timer, system + * will panic due to illegal memory access + */ + if(!is_mapped) { + sirfsoc_of_timer_map(); + is_mapped = 1; + } + + return sirfsoc_timer_read(NULL) * (NSEC_PER_SEC / CLOCK_TICK_RATE); +} + +static void __init sirfsoc_clockevent_init(void) +{ + clockevents_calc_mult_shift(&sirfsoc_clockevent, CLOCK_TICK_RATE, 60); + + sirfsoc_clockevent.max_delta_ns = + clockevent_delta2ns(-2, &sirfsoc_clockevent); + sirfsoc_clockevent.min_delta_ns = + clockevent_delta2ns(2, &sirfsoc_clockevent); + + sirfsoc_clockevent.cpumask = cpumask_of(0); + clockevents_register_device(&sirfsoc_clockevent); +} + +/* initialize the kernel jiffy timer source */ +static void __init sirfsoc_timer_init(void) +{ + unsigned long rate; + + /* timer's input clock is io clock */ + struct clk *clk = clk_get_sys("io", NULL); + + BUG_ON(IS_ERR(clk)); + + rate = clk_get_rate(clk); + + BUG_ON(rate < CLOCK_TICK_RATE); + BUG_ON(rate % CLOCK_TICK_RATE); + + writel_relaxed(rate / CLOCK_TICK_RATE / 2 - 1, sirfsoc_timer_base + SIRFSOC_TIMER_DIV); + writel_relaxed(0, sirfsoc_timer_base + SIRFSOC_TIMER_COUNTER_LO); + writel_relaxed(0, sirfsoc_timer_base + SIRFSOC_TIMER_COUNTER_HI); + writel_relaxed(BIT(0), sirfsoc_timer_base + SIRFSOC_TIMER_STATUS); + + BUG_ON(clocksource_register_hz(&sirfsoc_clocksource, CLOCK_TICK_RATE)); + + BUG_ON(setup_irq(sirfsoc_timer_irq.irq, &sirfsoc_timer_irq)); + + sirfsoc_clockevent_init(); +} + +static struct of_device_id timer_ids[] = { + { .compatible = "sirf,prima2-tick" }, +}; + +static void __init sirfsoc_of_timer_map(void) +{ + struct device_node *np; + const unsigned int *intspec; + + np = of_find_matching_node(NULL, timer_ids); + if (!np) + panic("unable to find compatible timer node in dtb\n"); + sirfsoc_timer_base = of_iomap(np, 0); + if (!sirfsoc_timer_base) + panic("unable to map timer cpu registers\n"); + + /* Get the interrupts property */ + intspec = of_get_property(np, "interrupts", NULL); + BUG_ON(!intspec); + sirfsoc_timer_irq.irq = be32_to_cpup(intspec); + + of_node_put(np); +} + +struct sys_timer sirfsoc_timer = { + .init = sirfsoc_timer_init, +}; diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index 0074b8dba793..edf0681c0e29 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -821,7 +821,7 @@ config CACHE_L2X0 depends on REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP || MACH_REALVIEW_PB1176 || \ REALVIEW_EB_A9MP || SOC_IMX35 || SOC_IMX31 || MACH_REALVIEW_PBX || \ ARCH_NOMADIK || ARCH_OMAP4 || ARCH_EXYNOS4 || ARCH_TEGRA || \ - ARCH_U8500 || ARCH_VEXPRESS_CA9X4 || ARCH_SHMOBILE + ARCH_U8500 || ARCH_VEXPRESS_CA9X4 || ARCH_SHMOBILE || ARCH_PRIMA2 default y select OUTER_CACHE select OUTER_CACHE_SYNC -- cgit v1.2.3 From 22698aa252e5e10f5b6d171bf82669deeab3bee1 Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Sat, 25 Jun 2011 02:04:34 +0800 Subject: serial/imx: add device tree probe support It adds device tree probe support for imx tty/serial driver. Signed-off-by: Jeremy Kerr Signed-off-by: Jason Liu Signed-off-by: Shawn Guo Cc: Sascha Hauer Cc: Alan Cox Cc: Cc: Greg Kroah-Hartman Cc: Grant Likely Acked-by: Grant Likely --- .../bindings/tty/serial/fsl-imx-uart.txt | 19 +++++ drivers/tty/serial/imx.c | 83 +++++++++++++++++++--- 2 files changed, 91 insertions(+), 11 deletions(-) create mode 100644 Documentation/devicetree/bindings/tty/serial/fsl-imx-uart.txt (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/tty/serial/fsl-imx-uart.txt b/Documentation/devicetree/bindings/tty/serial/fsl-imx-uart.txt new file mode 100644 index 000000000000..a9c0406280e8 --- /dev/null +++ b/Documentation/devicetree/bindings/tty/serial/fsl-imx-uart.txt @@ -0,0 +1,19 @@ +* Freescale i.MX Universal Asynchronous Receiver/Transmitter (UART) + +Required properties: +- compatible : Should be "fsl,-uart" +- reg : Address and length of the register set for the device +- interrupts : Should contain uart interrupt + +Optional properties: +- fsl,uart-has-rtscts : Indicate the uart has rts and cts +- fsl,irda-mode : Indicate the uart supports irda mode + +Example: + +uart@73fbc000 { + compatible = "fsl,imx51-uart", "fsl,imx21-uart"; + reg = <0x73fbc000 0x4000>; + interrupts = <31>; + fsl,uart-has-rtscts; +}; diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c index 2d5eac20c5cd..827db7654594 100644 --- a/drivers/tty/serial/imx.c +++ b/drivers/tty/serial/imx.c @@ -45,6 +45,8 @@ #include #include #include +#include +#include #include #include @@ -235,6 +237,13 @@ static struct platform_device_id imx_uart_devtype[] = { }; MODULE_DEVICE_TABLE(platform, imx_uart_devtype); +static struct of_device_id imx_uart_dt_ids[] = { + { .compatible = "fsl,imx1-uart", .data = &imx_uart_devdata[IMX1_UART], }, + { .compatible = "fsl,imx21-uart", .data = &imx_uart_devdata[IMX21_UART], }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, imx_uart_dt_ids); + static inline unsigned uts_reg(struct imx_port *sport) { return sport->devdata->uts_reg; @@ -1273,6 +1282,63 @@ static int serial_imx_resume(struct platform_device *dev) return 0; } +#ifdef CONFIG_OF +static int serial_imx_probe_dt(struct imx_port *sport, + struct platform_device *pdev) +{ + struct device_node *np = pdev->dev.of_node; + const struct of_device_id *of_id = + of_match_device(imx_uart_dt_ids, &pdev->dev); + int ret; + + if (!np) + return -ENODEV; + + ret = of_alias_get_id(np, "serial"); + if (ret < 0) { + pr_err("%s: failed to get alias id, errno %d\n", + __func__, ret); + return -ENODEV; + } else { + sport->port.line = ret; + } + + if (of_get_property(np, "fsl,uart-has-rtscts", NULL)) + sport->have_rtscts = 1; + + if (of_get_property(np, "fsl,irda-mode", NULL)) + sport->use_irda = 1; + + sport->devdata = of_id->data; + + return 0; +} +#else +static inline int serial_imx_probe_dt(struct imx_port *sport, + struct platform_device *pdev) +{ + return -ENODEV; +} +#endif + +static void serial_imx_probe_pdata(struct imx_port *sport, + struct platform_device *pdev) +{ + struct imxuart_platform_data *pdata = pdev->dev.platform_data; + + sport->port.line = pdev->id; + sport->devdata = (struct imx_uart_data *) pdev->id_entry->driver_data; + + if (!pdata) + return; + + if (pdata->flags & IMXUART_HAVE_RTSCTS) + sport->have_rtscts = 1; + + if (pdata->flags & IMXUART_IRDA) + sport->use_irda = 1; +} + static int serial_imx_probe(struct platform_device *pdev) { struct imx_port *sport; @@ -1285,6 +1351,10 @@ static int serial_imx_probe(struct platform_device *pdev) if (!sport) return -ENOMEM; + ret = serial_imx_probe_dt(sport, pdev); + if (ret == -ENODEV) + serial_imx_probe_pdata(sport, pdev); + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (!res) { ret = -ENODEV; @@ -1309,11 +1379,9 @@ static int serial_imx_probe(struct platform_device *pdev) sport->port.fifosize = 32; sport->port.ops = &imx_pops; sport->port.flags = UPF_BOOT_AUTOCONF; - sport->port.line = pdev->id; init_timer(&sport->timer); sport->timer.function = imx_timeout; sport->timer.data = (unsigned long)sport; - sport->devdata = (struct imx_uart_data *) pdev->id_entry->driver_data; sport->clk = clk_get(&pdev->dev, "uart"); if (IS_ERR(sport->clk)) { @@ -1324,17 +1392,9 @@ static int serial_imx_probe(struct platform_device *pdev) sport->port.uartclk = clk_get_rate(sport->clk); - imx_ports[pdev->id] = sport; + imx_ports[sport->port.line] = sport; pdata = pdev->dev.platform_data; - if (pdata && (pdata->flags & IMXUART_HAVE_RTSCTS)) - sport->have_rtscts = 1; - -#ifdef CONFIG_IRDA - if (pdata && (pdata->flags & IMXUART_IRDA)) - sport->use_irda = 1; -#endif - if (pdata && pdata->init) { ret = pdata->init(pdev); if (ret) @@ -1396,6 +1456,7 @@ static struct platform_driver serial_imx_driver = { .driver = { .name = "imx-uart", .owner = THIS_MODULE, + .of_match_table = imx_uart_dt_ids, }, }; -- cgit v1.2.3 From ca2cc333920690db87a03c2ee3bd6f43adb3e7fb Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Sat, 25 Jun 2011 02:04:35 +0800 Subject: net/fec: add device tree probe support It adds device tree probe support for fec driver. Signed-off-by: Jason Liu Signed-off-by: Shawn Guo Cc: David S. Miller Cc: Grant Likely Acked-by: Grant Likely Acked-by: David S. Miller --- Documentation/devicetree/bindings/net/fsl-fec.txt | 24 +++++ drivers/net/fec.c | 103 ++++++++++++++++++++-- 2 files changed, 122 insertions(+), 5 deletions(-) create mode 100644 Documentation/devicetree/bindings/net/fsl-fec.txt (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/net/fsl-fec.txt b/Documentation/devicetree/bindings/net/fsl-fec.txt new file mode 100644 index 000000000000..de439517dff0 --- /dev/null +++ b/Documentation/devicetree/bindings/net/fsl-fec.txt @@ -0,0 +1,24 @@ +* Freescale Fast Ethernet Controller (FEC) + +Required properties: +- compatible : Should be "fsl,-fec" +- reg : Address and length of the register set for the device +- interrupts : Should contain fec interrupt +- phy-mode : String, operation mode of the PHY interface. + Supported values are: "mii", "gmii", "sgmii", "tbi", "rmii", + "rgmii", "rgmii-id", "rgmii-rxid", "rgmii-txid", "rtbi", "smii". +- phy-reset-gpios : Should specify the gpio for phy reset + +Optional properties: +- local-mac-address : 6 bytes, mac address + +Example: + +fec@83fec000 { + compatible = "fsl,imx51-fec", "fsl,imx27-fec"; + reg = <0x83fec000 0x4000>; + interrupts = <87>; + phy-mode = "mii"; + phy-reset-gpios = <&gpio1 14 0>; /* GPIO2_14 */ + local-mac-address = [00 04 9F 01 1B B9]; +}; diff --git a/drivers/net/fec.c b/drivers/net/fec.c index ed137bbbcf61..e8266ccf818a 100644 --- a/drivers/net/fec.c +++ b/drivers/net/fec.c @@ -44,6 +44,10 @@ #include #include #include +#include +#include +#include +#include #include @@ -89,6 +93,20 @@ static struct platform_device_id fec_devtype[] = { }; MODULE_DEVICE_TABLE(platform, fec_devtype); +enum imx_fec_type { + IMX25_FEC = 1, /* runs on i.mx25/50/53 */ + IMX27_FEC, /* runs on i.mx27/35/51 */ + IMX28_FEC, +}; + +static const struct of_device_id fec_dt_ids[] = { + { .compatible = "fsl,imx25-fec", .data = &fec_devtype[IMX25_FEC], }, + { .compatible = "fsl,imx27-fec", .data = &fec_devtype[IMX27_FEC], }, + { .compatible = "fsl,imx28-fec", .data = &fec_devtype[IMX28_FEC], }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, fec_dt_ids); + static unsigned char macaddr[ETH_ALEN]; module_param_array(macaddr, byte, NULL, 0); MODULE_PARM_DESC(macaddr, "FEC Ethernet MAC address"); @@ -748,8 +766,22 @@ static void __inline__ fec_get_mac(struct net_device *ndev) */ iap = macaddr; +#ifdef CONFIG_OF + /* + * 2) from device tree data + */ + if (!is_valid_ether_addr(iap)) { + struct device_node *np = fep->pdev->dev.of_node; + if (np) { + const char *mac = of_get_mac_address(np); + if (mac) + iap = (unsigned char *) mac; + } + } +#endif + /* - * 2) from flash or fuse (via platform data) + * 3) from flash or fuse (via platform data) */ if (!is_valid_ether_addr(iap)) { #ifdef CONFIG_M5272 @@ -762,7 +794,7 @@ static void __inline__ fec_get_mac(struct net_device *ndev) } /* - * 3) FEC mac registers set by bootloader + * 4) FEC mac registers set by bootloader */ if (!is_valid_ether_addr(iap)) { *((unsigned long *) &tmpaddr[0]) = @@ -1368,6 +1400,52 @@ static int fec_enet_init(struct net_device *ndev) return 0; } +#ifdef CONFIG_OF +static int __devinit fec_get_phy_mode_dt(struct platform_device *pdev) +{ + struct device_node *np = pdev->dev.of_node; + + if (np) + return of_get_phy_mode(np); + + return -ENODEV; +} + +static int __devinit fec_reset_phy(struct platform_device *pdev) +{ + int err, phy_reset; + struct device_node *np = pdev->dev.of_node; + + if (!np) + return -ENODEV; + + phy_reset = of_get_named_gpio(np, "phy-reset-gpios", 0); + err = gpio_request_one(phy_reset, GPIOF_OUT_INIT_LOW, "phy-reset"); + if (err) { + pr_warn("FEC: failed to get gpio phy-reset: %d\n", err); + return err; + } + msleep(1); + gpio_set_value(phy_reset, 1); + + return 0; +} +#else /* CONFIG_OF */ +static inline int fec_get_phy_mode_dt(struct platform_device *pdev) +{ + return -ENODEV; +} + +static inline int fec_reset_phy(struct platform_device *pdev) +{ + /* + * In case of platform probe, the reset has been done + * by machine code. + */ + return 0; +} +#endif /* CONFIG_OF */ + static int __devinit fec_probe(struct platform_device *pdev) { @@ -1376,6 +1454,11 @@ fec_probe(struct platform_device *pdev) struct net_device *ndev; int i, irq, ret = 0; struct resource *r; + const struct of_device_id *of_id; + + of_id = of_match_device(fec_dt_ids, &pdev->dev); + if (of_id) + pdev->id_entry = of_id->data; r = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (!r) @@ -1407,9 +1490,18 @@ fec_probe(struct platform_device *pdev) platform_set_drvdata(pdev, ndev); - pdata = pdev->dev.platform_data; - if (pdata) - fep->phy_interface = pdata->phy; + ret = fec_get_phy_mode_dt(pdev); + if (ret < 0) { + pdata = pdev->dev.platform_data; + if (pdata) + fep->phy_interface = pdata->phy; + else + fep->phy_interface = PHY_INTERFACE_MODE_MII; + } else { + fep->phy_interface = ret; + } + + fec_reset_phy(pdev); /* This device has up to three irqs on some platforms */ for (i = 0; i < 3; i++) { @@ -1544,6 +1636,7 @@ static struct platform_driver fec_driver = { #ifdef CONFIG_PM .pm = &fec_pm_ops, #endif + .of_match_table = fec_dt_ids, }, .id_table = fec_devtype, .probe = fec_probe, -- cgit v1.2.3 From abfafc2d10ee2ad217be9ef06181819ca5dd6960 Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Thu, 30 Jun 2011 15:44:44 +0800 Subject: mmc: sdhci-esdhc-imx: add device tree probe support The patch adds device tree probe support for sdhci-esdhc-imx driver. Signed-off-by: Shawn Guo Cc: Wolfram Sang Cc: Chris Ball Cc: Grant Likely Acked-by: Grant Likely Acked-by: Chris Ball --- .../devicetree/bindings/mmc/fsl-imx-esdhc.txt | 34 ++++++++++ drivers/mmc/host/sdhci-esdhc-imx.c | 78 +++++++++++++++++++--- 2 files changed, 103 insertions(+), 9 deletions(-) create mode 100644 Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt new file mode 100644 index 000000000000..ab22fe6e73ab --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt @@ -0,0 +1,34 @@ +* Freescale Enhanced Secure Digital Host Controller (eSDHC) for i.MX + +The Enhanced Secure Digital Host Controller on Freescale i.MX family +provides an interface for MMC, SD, and SDIO types of memory cards. + +Required properties: +- compatible : Should be "fsl,-esdhc" +- reg : Should contain eSDHC registers location and length +- interrupts : Should contain eSDHC interrupt + +Optional properties: +- fsl,card-wired : Indicate the card is wired to host permanently +- fsl,cd-internal : Indicate to use controller internal card detection +- fsl,wp-internal : Indicate to use controller internal write protection +- cd-gpios : Specify GPIOs for card detection +- wp-gpios : Specify GPIOs for write protection + +Examples: + +esdhc@70004000 { + compatible = "fsl,imx51-esdhc"; + reg = <0x70004000 0x4000>; + interrupts = <1>; + fsl,cd-internal; + fsl,wp-internal; +}; + +esdhc@70008000 { + compatible = "fsl,imx51-esdhc"; + reg = <0x70008000 0x4000>; + interrupts = <2>; + cd-gpios = <&gpio0 6 0>; /* GPIO1_6 */ + wp-gpios = <&gpio0 5 0>; /* GPIO1_5 */ +}; diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c index a0d0da4d9bc8..9ebfb4b482f5 100644 --- a/drivers/mmc/host/sdhci-esdhc-imx.c +++ b/drivers/mmc/host/sdhci-esdhc-imx.c @@ -20,6 +20,9 @@ #include #include #include +#include +#include +#include #include #include "sdhci-pltfm.h" #include "sdhci-esdhc.h" @@ -74,6 +77,15 @@ static struct platform_device_id imx_esdhc_devtype[] = { }; MODULE_DEVICE_TABLE(platform, imx_esdhc_devtype); +static const struct of_device_id imx_esdhc_dt_ids[] = { + { .compatible = "fsl,imx25-esdhc", .data = &imx_esdhc_devtype[IMX25_ESDHC], }, + { .compatible = "fsl,imx35-esdhc", .data = &imx_esdhc_devtype[IMX35_ESDHC], }, + { .compatible = "fsl,imx51-esdhc", .data = &imx_esdhc_devtype[IMX51_ESDHC], }, + { .compatible = "fsl,imx53-esdhc", .data = &imx_esdhc_devtype[IMX53_ESDHC], }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, imx_esdhc_dt_ids); + static inline int is_imx25_esdhc(struct pltfm_imx_data *data) { return data->devtype == IMX25_ESDHC; @@ -290,8 +302,48 @@ static irqreturn_t cd_irq(int irq, void *data) return IRQ_HANDLED; }; +#ifdef CONFIG_OF +static int __devinit +sdhci_esdhc_imx_probe_dt(struct platform_device *pdev, + struct esdhc_platform_data *boarddata) +{ + struct device_node *np = pdev->dev.of_node; + + if (!np) + return -ENODEV; + + if (of_get_property(np, "fsl,card-wired", NULL)) + boarddata->cd_type = ESDHC_CD_PERMANENT; + + if (of_get_property(np, "fsl,cd-controller", NULL)) + boarddata->cd_type = ESDHC_CD_CONTROLLER; + + if (of_get_property(np, "fsl,wp-controller", NULL)) + boarddata->wp_type = ESDHC_WP_CONTROLLER; + + boarddata->cd_gpio = of_get_named_gpio(np, "cd-gpios", 0); + if (gpio_is_valid(boarddata->cd_gpio)) + boarddata->cd_type = ESDHC_CD_GPIO; + + boarddata->wp_gpio = of_get_named_gpio(np, "wp-gpios", 0); + if (gpio_is_valid(boarddata->wp_gpio)) + boarddata->wp_type = ESDHC_WP_GPIO; + + return 0; +} +#else +static inline int +sdhci_esdhc_imx_probe_dt(struct platform_device *pdev, + struct esdhc_platform_data *boarddata) +{ + return -ENODEV; +} +#endif + static int __devinit sdhci_esdhc_imx_probe(struct platform_device *pdev) { + const struct of_device_id *of_id = + of_match_device(imx_esdhc_dt_ids, &pdev->dev); struct sdhci_pltfm_host *pltfm_host; struct sdhci_host *host; struct esdhc_platform_data *boarddata; @@ -306,9 +358,13 @@ static int __devinit sdhci_esdhc_imx_probe(struct platform_device *pdev) pltfm_host = sdhci_priv(host); imx_data = kzalloc(sizeof(struct pltfm_imx_data), GFP_KERNEL); - if (!imx_data) - return -ENOMEM; + if (!imx_data) { + err = -ENOMEM; + goto err_imx_data; + } + if (of_id) + pdev->id_entry = of_id->data; imx_data->devtype = pdev->id_entry->driver_data; pltfm_host->priv = imx_data; @@ -331,14 +387,16 @@ static int __devinit sdhci_esdhc_imx_probe(struct platform_device *pdev) if (is_imx53_esdhc(imx_data)) imx_data->flags |= ESDHC_FLAG_MULTIBLK_NO_INT; - if (!host->mmc->parent->platform_data) { - dev_err(mmc_dev(host->mmc), "no board data!\n"); - err = -EINVAL; - goto no_board_data; - } - imx_data->boarddata = *((struct esdhc_platform_data *) - host->mmc->parent->platform_data); boarddata = &imx_data->boarddata; + if (sdhci_esdhc_imx_probe_dt(pdev, boarddata) < 0) { + if (!host->mmc->parent->platform_data) { + dev_err(mmc_dev(host->mmc), "no board data!\n"); + err = -EINVAL; + goto no_board_data; + } + imx_data->boarddata = *((struct esdhc_platform_data *) + host->mmc->parent->platform_data); + } /* write_protect */ if (boarddata->wp_type == ESDHC_WP_GPIO) { @@ -407,6 +465,7 @@ no_board_data: clk_put(pltfm_host->clk); err_clk_get: kfree(imx_data); +err_imx_data: sdhci_pltfm_free(pdev); return err; } @@ -442,6 +501,7 @@ static struct platform_driver sdhci_esdhc_imx_driver = { .driver = { .name = "sdhci-esdhc-imx", .owner = THIS_MODULE, + .of_match_table = imx_esdhc_dt_ids, }, .id_table = imx_esdhc_devtype, .probe = sdhci_esdhc_imx_probe, -- cgit v1.2.3 From 580975d7f48d7d047e22bb0f42adf7557801d8d4 Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Thu, 14 Jul 2011 08:35:48 +0800 Subject: dmaengine: imx-sdma: add device tree probe support It adds device tree probe support for imx-sdma driver. Signed-off-by: Shawn Guo Cc: Grant Likely Cc: Vinod Koul Cc: Sascha Hauer Acked-by: Vinod Koul --- .../devicetree/bindings/dma/fsl-imx-sdma.txt | 17 +++++++++ drivers/dma/imx-sdma.c | 42 ++++++++++++++++++++-- 2 files changed, 56 insertions(+), 3 deletions(-) create mode 100644 Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt b/Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt new file mode 100644 index 000000000000..d1e3f443e205 --- /dev/null +++ b/Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt @@ -0,0 +1,17 @@ +* Freescale Smart Direct Memory Access (SDMA) Controller for i.MX + +Required properties: +- compatible : Should be "fsl,-sdma" +- reg : Should contain SDMA registers location and length +- interrupts : Should contain SDMA interrupt +- fsl,sdma-ram-script-name : Should contain the full path of SDMA RAM + scripts firmware + +Examples: + +sdma@83fb0000 { + compatible = "fsl,imx51-sdma", "fsl,imx35-sdma"; + reg = <0x83fb0000 0x4000>; + interrupts = <6>; + fsl,sdma-ram-script-name = "sdma-imx51.bin"; +}; diff --git a/drivers/dma/imx-sdma.c b/drivers/dma/imx-sdma.c index df400691f9a0..1eb60ded2f0d 100644 --- a/drivers/dma/imx-sdma.c +++ b/drivers/dma/imx-sdma.c @@ -32,6 +32,8 @@ #include #include #include +#include +#include #include #include @@ -332,6 +334,13 @@ static struct platform_device_id sdma_devtypes[] = { }; MODULE_DEVICE_TABLE(platform, sdma_devtypes); +static const struct of_device_id sdma_dt_ids[] = { + { .compatible = "fsl,imx31-sdma", .data = &sdma_devtypes[IMX31_SDMA], }, + { .compatible = "fsl,imx35-sdma", .data = &sdma_devtypes[IMX35_SDMA], }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, sdma_dt_ids); + #define SDMA_H_CONFIG_DSPDMA (1 << 12) /* indicates if the DSPDMA is used */ #define SDMA_H_CONFIG_RTD_PINS (1 << 11) /* indicates if Real-Time Debug pins are enabled */ #define SDMA_H_CONFIG_ACR (1 << 4) /* indicates if AHB freq /core freq = 2 or 1 */ @@ -1250,6 +1259,10 @@ err_dma_alloc: static int __init sdma_probe(struct platform_device *pdev) { + const struct of_device_id *of_id = + of_match_device(sdma_dt_ids, &pdev->dev); + struct device_node *np = pdev->dev.of_node; + const char *fw_name; int ret; int irq; struct resource *iores; @@ -1265,7 +1278,7 @@ static int __init sdma_probe(struct platform_device *pdev) iores = platform_get_resource(pdev, IORESOURCE_MEM, 0); irq = platform_get_irq(pdev, 0); - if (!iores || irq < 0 || !pdata) { + if (!iores || irq < 0) { ret = -EINVAL; goto err_irq; } @@ -1295,6 +1308,8 @@ static int __init sdma_probe(struct platform_device *pdev) if (!sdma->script_addrs) goto err_alloc; + if (of_id) + pdev->id_entry = of_id->data; sdma->devtype = pdev->id_entry->driver_data; dma_cap_set(DMA_SLAVE, sdma->dma_device.cap_mask); @@ -1325,10 +1340,30 @@ static int __init sdma_probe(struct platform_device *pdev) if (ret) goto err_init; - if (pdata->script_addrs) + if (pdata && pdata->script_addrs) sdma_add_scripts(sdma, pdata->script_addrs); - sdma_get_firmware(sdma, pdata->fw_name); + if (pdata) { + sdma_get_firmware(sdma, pdata->fw_name); + } else { + /* + * Because that device tree does not encode ROM script address, + * the RAM script in firmware is mandatory for device tree + * probe, otherwise it fails. + */ + ret = of_property_read_string(np, "fsl,sdma-ram-script-name", + &fw_name); + if (ret) { + dev_err(&pdev->dev, "failed to get firmware name\n"); + goto err_init; + } + + ret = sdma_get_firmware(sdma, fw_name); + if (ret) { + dev_err(&pdev->dev, "failed to get firmware\n"); + goto err_init; + } + } sdma->dma_device.dev = &pdev->dev; @@ -1376,6 +1411,7 @@ static int __exit sdma_remove(struct platform_device *pdev) static struct platform_driver sdma_driver = { .driver = { .name = "imx-sdma", + .of_match_table = sdma_dt_ids, }, .id_table = sdma_devtypes, .remove = __exit_p(sdma_remove), -- cgit v1.2.3